Item 1. Business
General
We are a leading global supplier of high-performance analog and mixed-signal semiconductors and advanced algorithms and were incorporated in Delaware in 1960. We design, develop, manufacture and market a wide range of products for commercial applications, the majority of which are sold into the infrastructure, high-end consumer and industrial end markets.
Infrastructure: data centers, passive optical networks ("PON"), base stations, optical networks, servers, carrier networks, switches and routers, cable modems, wireless local area network ("LAN") and other communication infrastructure equipment.
High-End Consumer: smartphones, tablets, wearables, desktops, notebooks, and other handheld products, wireless charging, set-top boxes, digital televisions, monitors and displays, digital video recorders and other consumer equipment.
Industrial: Internet of Things ("IoT"), analog and digital video broadcast equipment, video-over-IP solutions, automated meter reading, smart grid, wireless charging, military and aerospace, medical, security systems, automotive, industrial and home automation and other industrial equipment.
Our end customers are primarily original equipment manufacturers ("OEMs") that produce and sell electronics.
Overview of the Semiconductor Industry
The semiconductor industry is broadly divided into analog and digital semiconductor products. Analog semiconductors condition and regulate "real world" functions such as temperature, speed, sound and electrical current. Digital semiconductors process binary information, such as that used by computers. Mixed-signal devices incorporate both analog and digital functions into a single chip and provide the ability for digital electronics to interface with the outside world.
The market for analog and mixed-signal semiconductors differs from the market for digital semiconductors. The analog and mixed-signal industry is typically characterized by longer product life cycles than the digital industry. In addition, analog semiconductor manufacturers tend to have lower capital investment requirements for manufacturing because their facilities tend to be less dependent than digital producers on state-of-the-art production equipment to manufacture leading edge process technologies. The end-product markets for analog and mixed-signal semiconductors are more varied and more specialized than the relatively standardized digital semiconductor product markets.
Another difference between the analog and digital markets is the amount of available talented labor. The analog industry relies more heavily than the digital industry on design and applications talent to distinguish its products from one another. Digital expertise is extensively taught in universities due to its overall market size, while analog and mixed-signal expertise tends to be learned over time based on experience and hands-on training. Consequently, personnel with analog training are scarcer than digital trained engineers. This has historically made it more difficult for new suppliers in the analog market to quickly develop products and gain significant market share.
Advancements in digital signal processing technology typically drive the need for corresponding advancements in analog and mixed-signal solutions. We believe that the diversity of our applications allows us to take advantage of areas of relative market strength and reduces our vulnerability to competitive pressure in any one area.
Business Strategy
Our objective is to be a leading supplier of high-performance analog and mixed-signal semiconductors and advanced algorithms to the fastest growing segments of our target markets. We intend to leverage our pool of skilled technical personnel to develop new products or, where appropriate, use strategic acquisitions or small strategic investments to either accelerate our position in the fastest growing areas or to gain entry into these areas. In order to capitalize on our strengths in analog and mixed-signal processing design, development and marketing, we intend to pursue the following strategies:
Leverage our rare analog and mixed-signal design expertise
We have developed a strategy to invest heavily in human resources needed to define, design and market high-performance analog and mixed-signal platform products. We have built a team of experienced engineers who combine industry expertise with advanced semiconductor design expertise to meet customer requirements and enable our customers to get their products to market rapidly. We intend to leverage this strategy to achieve new levels of integration, power reduction and performance, enabling our customers to achieve differentiation in their end systems.
Continue to release proprietary new products, achieve new design wins and cross-sell products
We are focused on developing unique, new, and proprietary products that bring value to our target customers in our target markets. These products are typically differentiated in performance but are priced competitively. We also focus on achieving design wins for our products with current and future customers. Design wins are indications by the customer that they intend to
incorporate our products into their product designs. Although we believe that a design win is an indicator of future potential growth, it does not inevitably result in us being awarded business or receiving a purchase commitment. Our technical talent works closely with our customers in securing design wins, defining new products and in implementing and integrating our products into their systems. We also focus on selling our complete portfolio of products to our existing customers, as we believe the technical expertise of our marketing and sales teams allows us to identify and capitalize on cross-selling opportunities.
Focus on fast-growing market segments and regions
We have chosen to target the analog and mixed-signal sub-segments of some of the most exciting and fastest growing end markets. We participate in these markets by focusing on specific product areas within the analog and mixed-signal market, including products for infrastructure, high-end consumer and industrial end markets. All of these markets are characterized by their need for leading-edge, high-performance analog and mixed-signal semiconductor technologies.
The infrastructure, high-end consumer and industrial end markets we supply are characterized by several trends that we believe drive demand for our products. The key trends that we believe are significant for our future growth include:
•Increasing bandwidth over high-speed networks, fueling growth in high speed multimedia transmission, as well as better connectivity;
•Demand for smaller, lighter, more highly integrated and feature-rich mobile devices; and
•Increasing demands for cloud and internet connectivity to low power sensors, enabling a more connected, intelligent and sustainable planet.
Our products address these market trends by providing solutions that are ultra-low power thereby extending battery life, small form factor enabling smaller more mobile devices, highly integrated enabling more functionality within devices, and high-performance enabling product differentiation within our customer base. Additionally, as communications functions are increasingly integrated into a range of systems and devices, these products require analog sensing, processing and control capabilities, which increases the number and size of our targeted end markets.
Leverage outsourced semiconductor fabrication capacity
We outsource most of our manufacturing in order to focus more of our resources on designing, developing and marketing our products. A significant amount of our third-party subcontractors and suppliers, including third-party foundries that supply silicon wafers, are located in the United States ("U.S."), Taiwan, China and Israel. We believe that outsourcing provides us numerous benefits including, capital efficiency, the flexibility to adopt and leverage emerging process technologies without significant investment risk, and a more variable cost of goods, which provides us with greater operating flexibility.
Products and Technology
We design, develop, manufacture and market high-performance analog and mixed-signal semiconductors and advanced algorithms. We currently operate and account for results in one reportable segment through three product lines: Signal Integrity, Wireless and Sensing, and Protection.
Signal Integrity. We design, develop and market a portfolio of optical data communications and video transport products used in a wide variety of infrastructure and industrial applications. Our comprehensive portfolio of integrated circuits ("ICs") for data centers, enterprise networks, PON, and wireless base station optical transceivers and high-speed interfaces ranges from 100Mbps to 400Gbps and supports key industry standards such as Fibre Channel, Infiniband, Ethernet, PON and synchronous optical networks. Our video products offer advanced solutions for next generation high-definition broadcast applications, as well as highly differentiated video-over-IP technology for professional audio video ("Pro AV") applications.
Wireless and Sensing. We design, develop and market a portfolio of specialized radio frequency products used in a wide variety of industrial, medical and communications applications, and specialized sensing products used in industrial and consumer applications. Our wireless products, which include our LoRa® devices and wireless radio frequency technology ("LoRa Technology"), feature industry leading and longest range industrial, scientific and medical radio, enabling a lower total cost of ownership and increased reliability in all environments. This makes these products particularly suitable for machine to machine and IoT applications. Our unique sensing technology enables proximity sensing and advanced user interface solutions for our mobile and consumer products. Our wireless and sensing products can be found in a broad range of applications in the industrial, medical, and consumer markets. We also design, develop, and market power product devices that control, alter, regulate, and condition the power within electronic systems focused on the LoRa and IoT infrastructure segment. The highest volume product types within this category are switching voltage regulators, combination switching and linear regulators, smart regulators, isolated switches, and wireless charging.
Protection. We design, develop and market high-performance protection devices, which are often referred to as transient voltage suppressors ("TVS"). TVS devices provide protection for electronic systems where voltage spikes (called transients), such as electrostatic discharge, electrical over stress or secondary lightning surge energy, can permanently damage sensitive ICs. Our portfolio of protection solutions include filter and termination devices that are integrated with the TVS device. Our
products provide robust protection while preserving signal integrity in high-speed communications, networking and video interfaces. These products also operate at very low voltage. Our protection products can be found in a broad range of applications including smart phones, LCD and organic light-emitting diode TVs and displays, set-top boxes, monitors and displays, tablets, computers, notebooks, base stations, routers, automobile and industrial instruments.
Our net sales by product line were as follows:
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fiscal Years
|
(in thousands)
|
2021
|
|
2020
|
|
2019
|
Signal Integrity
|
$
|
255,640
|
|
|
$
|
222,846
|
|
|
$
|
276,040
|
|
Wireless and Sensing
|
177,534
|
|
|
167,454
|
|
|
190,589
|
|
Protection
|
161,943
|
|
|
157,212
|
|
|
182,068
|
|
Other: Warrant Shares (1)
|
—
|
|
|
—
|
|
|
(21,501)
|
|
Total
|
$
|
595,117
|
|
|
$
|
547,512
|
|
|
$
|
627,196
|
|
(1) On October 5, 2016, we issued a warrant (the "Warrant") to Comcast Cable Communications Management LLC ("Comcast") to purchase up to 1,086,957 shares of our common stock. The Warrant was issued in connection with an agreement between the parties regarding the intended trial deployment by Comcast of a low-power wide-area Network ("LPWAN") in the U.S., based on our LoRa Technology. As of January 27, 2019, the Warrant was fully vested and exercisable for a total of 869,565 shares, with no additional costs to be recognized in future periods. The Warrant was fully exercised and no longer outstanding as of March 15, 2019.
Recent Acquisitions
On December 11, 2018, we, through our subsidiary Semtech (International) AG, a Swiss corporation, completed our acquisition of all of the outstanding equity interests of Trackio International AG, a Swiss corporation, and its subsidiaries (collectively, "TrackNet"), for an aggregate purchase price of approximately $8.5 million. TrackNet is a provider of LoRa-based end-to-end solutions for the IoT market and provides expertise and intellectual property that will be integrated into our business to support our goal of enabling the growing ecosystem around our LoRa Technology.
On May 2, 2018, we acquired substantially all of the assets of IC Interconnect, Inc. (“ICI”) for an aggregate purchase price of approximately $7.4 million. The addition of ICI is intended to enhance our U.S. research and development capabilities for our next-generation Z-Pak™ platform.
Semtech End Markets
Our products are sold primarily to customers in the infrastructure, high-end consumer and industrial end markets. Our net sales by major end market as a percentage of total net sales are detailed below:
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fiscal Years
|
(percentage of net sales)
|
2021
|
|
2020
|
|
2019
|
Infrastructure
|
42
|
%
|
|
38
|
%
|
|
43
|
%
|
High-End Consumer
|
27
|
%
|
|
29
|
%
|
|
28
|
%
|
Industrial
|
31
|
%
|
|
33
|
%
|
|
32
|
%
|
Other: Warrant Shares
|
—
|
%
|
|
—
|
%
|
|
(3)
|
%
|
Total
|
100
|
%
|
|
100
|
%
|
|
100
|
%
|
We believe that our diversity in end markets provides stability to our business and opportunity for growth.
The following table depicts our main product lines and their end market and product applications:
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Typical End Product Applications
|
Product Groups
|
|
Infrastructure
|
|
High-End Consumer
|
|
Industrial
|
Signal Integrity
|
|
Optical module ICs supporting up to 400Gb/s for Ethernet, Fibre Channel protocols in data center and access applications, 4G/5G/LTE wireless applications, Telecom applications and Backplane CDRs and signal conditioners
|
|
|
|
Serial Digital Interconnect interface ICs for Broadcast Video, Video over IP technology for Pro AV applications
|
|
|
|
|
|
|
|
Wireless and Sensing
|
|
|
|
Smartphones, media players, tablets, digital/still video cameras, wearables
|
|
Automated meter readers, industrial automation, IoT, keyless entry, hearing aids
|
|
|
|
|
|
|
|
Protection
|
|
Servers, workstations, desktop PC/notebooks, ultrabooks, optical modules, printers, copiers, 4G/5G/LTE base stations, 1/10 Gb/s Ethernet
|
|
Smartphones, tablets, wearables, cameras, TVs, set top boxes
|
|
Industrial automation, measurement & instrumentation, automotive, IoT
|
|
|
|
|
|
|
|
Seasonality
Seasonality has not historically had a material impact on our business segments or results of operations.
Sales and Marketing
Net sales made directly to customers during fiscal years 2021, 2020 and 2019, were approximately 18%, 28% and 32% of total net sales, respectively. The remaining 82%, 72% and 68% of net sales were made through independent distributors. The decline in direct sales is due to customers electing to leverage the value of distribution to better manage their supply chain. We have direct sales personnel located throughout the U.S., Europe, and Asia who manage the sales activities of independent sales representative firms and independent distributors. We expense our advertising costs as they are incurred.
We operate internationally through our foreign subsidiaries. Semtech (International) AG serves the European and Asian markets from its headquarters in Rapperswil, Switzerland, and through its wholly-owned subsidiaries based in the United Kingdom ("U.K.") and Japan. Semtech (International) AG also maintains branch offices, either directly or through one of its wholly-owned subsidiaries, in multiple countries including China, Taiwan and South Korea. Semtech Canada Corporation serves the Canadian market for most of the products from our Signal Integrity Products Group from its headquarters in Burlington, Ontario. Independent representatives and distributors are also used to serve customers throughout the world. Some of our distributors and sales representatives also offer products from our competitors, as is customary in the industry.
Customers, Sales Data and Backlog
As a result of the breadth of our products and markets, we have a broad and balanced range of customers.
Representative Customers by End Markets:
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Infrastructure
|
|
High-End Consumer
|
|
Industrial
|
|
Alphabet Inc.
|
|
Huawei Technologies Co., Ltd.
|
|
Honeywell Inc.
|
|
Cisco Systems, Inc.
|
|
LG Electronics Inc.
|
|
Itron, Inc.
|
|
Ericsson
|
|
Quanta Computer
|
|
Panasonic Corp
|
|
Hewlett-Packard
|
|
Samsung Electronics Co., Ltd.
|
|
Raytheon Company
|
|
Huawei Technologies Co., Ltd.
|
|
Sharp Corporation
|
|
Rockwell Automation
|
|
LuxNet Corp
|
|
|
|
Sharp Corporation
|
|
Lumentum Holdings Inc.
|
|
|
|
Sonova International
|
|
Samsung Electronics Co., Ltd.
|
|
|
|
Sony Corp
|
|
Sumitomo Electric
|
|
|
|
|
|
ZTE Corporation
|
|
|
|
|
|
Our customers include major OEMs and their subcontractors in the infrastructure, high-end consumer and industrial end markets. Our products are typically purchased by these customers for their performance, price and/or technical support, as compared to our competitors.
In fiscal years 2021, 2020 and 2019, sales in the U.S. represented 10%, 9% and 11% of our sales, respectively, while foreign sales represented 90%, 91% and 89% of our sales, respectively. Sales to customers located in China (including Hong Kong) and South Korea comprised 60% and 7% of our sales, respectively, in fiscal year 2021. No other foreign country comprised more than 5% of our sales in fiscal year 2021.
Concentration of Net Sales - Significant Customers
The following table sets forth the concentration of sales among the customers that accounted for more than 10% of our net sales in at least one of the fiscal years 2021, 2020 and 2019:
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fiscal Years
|
(percentage of net sales)
|
2021
|
|
2020
|
|
2019
|
Trend-tek Technology Ltd. (and affiliates)
|
17
|
%
|
|
13
|
%
|
|
14
|
%
|
Frontek Technology Corporation (and affiliates)
|
16
|
%
|
|
11
|
%
|
|
11
|
%
|
CEAC International Ltd. (and affiliates)
|
11
|
%
|
|
8
|
%
|
|
8
|
%
|
Arrow Electronics (and affiliates)
|
9
|
%
|
|
9
|
%
|
|
10
|
%
|
Samsung Electronics (and affiliates)
|
2
|
%
|
|
4
|
%
|
|
8
|
%
|
Premier Technical Sales Korea, Inc. (and affiliates) (1)
|
6
|
%
|
|
7
|
%
|
|
4
|
%
|
(1) Premier is a distributor with a concentration of sales to Samsung Electronics (and affiliates). The above percentages represent our estimate of the sales activity related to Samsung Electronics (and affiliates) that is passing through this distributor.
Concentration of Accounts Receivable - Significant Customers
The following table shows customers that had an outstanding receivable balance that represented at least 10% of total net receivables as of one or more of the dates indicated:
|
|
|
|
|
|
|
|
|
|
|
|
(percentage of net receivables)
|
January 31, 2021
|
|
January 26, 2020
|
Trend-tek Technology Ltd. (and affiliates)
|
14
|
%
|
|
13
|
%
|
CEAC International Ltd. (and affiliates)
|
14
|
%
|
|
11
|
%
|
Frontek Technology Corporation (and affiliates)
|
10
|
%
|
|
11
|
%
|
Backlog
Our backlog of orders as of the end of fiscal years 2021, 2020 and 2019 was approximately $161.4 million, $93.0 million and $72.6 million, respectively. The majority of our backlog is typically requested for delivery within six months. In markets where the end system life cycles are relatively short, customers typically request delivery in four to eight weeks. A backlog analysis at any given time gives little indication of our future business except on a short-term basis, principally within the next 45 days. We do not have any significant backlog with deliveries beyond 18 months.
Manufacturing Capabilities
Our strategy is to outsource most of our manufacturing functions to third-party foundries and assembly and test contractors. The third-party foundries fabricate silicon wafers, while the assembly and test contractors package and test our products. We believe this outsourcing permits us to take advantage of the best available technology, leverage the capital investment of others and reduce our operating costs associated with manufacturing assets.
We perform a limited amount of internal probe and final test activities at our facilities in Camarillo, Irvine and San Diego in California, Neuchâtel in Switzerland, and Reynosa in Mexico. These activities accommodate situations in which tight coupling with product design is desirable or where there are unique requirements. A majority of our very small form factor protection devices are packaged at our facilities in Colorado Springs, Colorado. Our packaged discrete rectifier products are packaged and tested in-house in Reynosa, Mexico. Almost all of our other products are packaged and tested by outside subcontractors.
In keeping with our mostly "fabless" business model, we have no wafer fabrication facilities except for our operation in Reynosa, Mexico. For fiscal year 2021, the Reynosa facility provided almost all of the silicon for our packaged discrete rectifier products, which were approximately 2% of our end product net sales. The remaining end products representing 98% of our net sales were supported with finished silicon wafers purchased from third-party wafer foundries primarily located in the U.S., Taiwan, China and Israel. We anticipate that substantially all of the silicon wafers we require will come from third-party foundries in fiscal year 2022.
Despite our use of third-party wafer foundries for sourcing a majority of our silicon needs, we do maintain internal process development capabilities. Our process engineers work closely with our third-party foundries on the improvement and development of process capabilities. In fiscal year 2021, we used various manufacturing processes, including Bipolar, CMOS, RF-CMOS and Silicon Germanium ("SiGe") BiCMOS processes.
While we do have some redundancy of fabrication processes by using multiple third-party foundries, any interruption of supply by one or more of these foundries could materially impact us. As a result, we maintain some amount of business interruption insurance in part to help reduce the financial risk associated with a wafer supply interruption, but we are not fully insured against this risk.
Although our products are made from basic materials (principally silicon, metals and plastics), all of which are available from a number of suppliers, capacity at wafer foundries sometimes becomes constrained. The limited availability of certain materials, such as silicon wafer substrates, may impact our suppliers’ ability to meet our demand needs or impact the price we are charged. The prices of certain other basic materials, such as metals, gases and chemicals used in the production of ICs can exhibit price volatility depending on the changes in demand for these basic commodities. In most cases, we do not procure these materials ourselves, but we are nevertheless reliant on these materials for producing our products because our third-party foundry and package and test subcontractors must procure them. To help minimize risks associated with constrained capacity, we use multiple foundries and have taken other steps to prevent supply interruptions at certain foundries and subcontractors.
In addition to our development and production facilities in Colorado Springs, Colorado, which provide assembly services for a majority of our very small form factor protection devices, we use third-party subcontractors to perform almost all of our other assembly and test operations. A majority of our offshore assembly and test activity is conducted by third-party subcontractors based in China, Malaysia, Taiwan, Thailand, South Korea and the Philippines. We have operations offices located in the Philippines, Malaysia and China that support and coordinate some of the worldwide shipment of products. We have installed our own test equipment at some of our packaging and testing subcontractors in order to ensure a certain level of capacity, assuming the subcontractor has ample employees to operate the equipment. We are monitoring the impact of the COVID-19 pandemic on our suppliers and third-party subcontractors and cannot determine the extent of the impact it may continue to have on our operations. See “Item 1A. Risk Factors - Risks Relating to Production Operations - We rely on a limited number of suppliers and subcontractors, many of which are foreign-based entities, for many essential components and materials and certain critical manufacturing services and any interruption or loss of supplies or services from these entities could significantly interrupt our business operations and the production of our products.”
Our arrangements with both third-party wafer foundries and package and test subcontractors are designed to provide some assurance of capacity but are not expected to assure access to all the manufacturing capacity we may need in the future.
Competition
The analog and mixed-signal semiconductor and advanced algorithms industries are highly competitive, and we expect competitive pressures to continue. Our ability to compete effectively and to expand our business will depend on our ability to continue to recruit and retain key engineering talent, our ability to execute on new product developments, and our ability to persuade customers to design these new products into their applications.
Our industry is characterized by decreasing average unit selling prices over the life of a product as the volumes typically increase. However, price decreases can sometimes be quite rapid and faster than the rate of increase of the associated product volumes. We believe we compete effectively based upon our ability to capitalize on efficiencies and economies of scale in production and sales, and our ability to maintain or improve our productivity and product yields to reduce manufacturing costs. Our industry is also characterized by rapid technological change, and design and other technological obsolescence. We believe we compete effectively based on our success in developing new products that implement new technologies, protection of our trade secrets and know-how and maintaining high product quality and reliability.
We are in direct and active competition, with respect to one or more of our product lines, with numerous manufacturers of varying size, technical capability and financial strength. A number of these competitors are dependent on semiconductor products as their principal source of income, and some are much larger and better resourced than we are. The number of competitors has grown due to expansion of the market segments in which we participate. Additionally, there has been a trend toward consolidation in our industry as companies attempt to strengthen or hold their market positions in an evolving industry. Such consolidations may make it more difficult for us to compete effectively, including on the basis of price, sales and marketing programs, channel coverage, technology or product functionality. We also expect that the trend among large OEMs to seek to develop their own semiconductor solutions will continue and expand. As we move into new markets, we may face competition from larger competitors with longer histories in these markets. Certain of our customers and suppliers also have divisions that produce products competitive with ours, and other customers may seek to vertically integrate competitive solutions in the future.
Intellectual Property and Licenses
We have been granted 203 U.S. patents and 112 foreign patents and have numerous patent applications pending with respect to our products and to technologies associated with our business. The expiration dates of issued patents range from 2021 to 2039. Although we consider patents to be helpful in maintaining a competitive advantage, we do not believe they create definitive competitive barriers to entry. There can be no assurance that our patent applications will lead to issued patents, that others will not develop or patent similar or superior products or technologies, or that our patents will not be challenged, invalidated, or circumvented by others. We have no material revenue associated with patents that expire in calendar years 2021, 2022 or 2023.
We have registered many of our trademarks in the U.S. and in various foreign jurisdictions. Registration generally provides rights in addition to basic trademark protections and is typically renewable upon proof of continued use. We have registered, or are in the process of registering, our SEMTECH trademark in many jurisdictions. In one location use of this trademark is prohibited, but we are permitted to use our Semtech International trade name. This restriction has not had a material impact on our business to date and we do not anticipate it will have a material impact in the future.
We also have registered certain materials in which we have copyright ownership, which provides additional protection for this intellectual property.
Intellectual Capital and Product Development
The development of intellectual property ("IP") and the resulting proprietary products is a critical success factor for us. Recruiting and retaining key technical talent is the foundation for designing, developing, and marketing our IP in the form of new proprietary products in the global marketplace. Our ability to recruit and retain our engineering talent is one of the keys to maintaining our competitive advantage. Historically, we have been successful in retaining our key engineering staff and recruiting new talent. One of our strategies to recruit talent is the establishment of multiple design center locations. As a result, we have design centers throughout the world.
Circuit design engineers, layout engineers, product and test engineers, application engineers, and field application engineers are our most valuable employees. Together they perform the critical tasks of design and layout of ICs, turning these circuits into silicon devices, and conferring with customers about designing these devices into their applications. The majority of our engineers fit into one of these categories. Most of these engineers have many years of experience in the design, development, and layout of circuits targeted for use in protection, advanced communications and power management, multimedia and data communications, and wireless and sensing applications. We also employ a number of software engineers and systems engineers that specialize in the development of software and systems architecture, who enable us to develop systems oriented products in select markets.
We occasionally enter into agreements with customers that allow us to recover certain costs associated with product design and engineering services. Recovery for these services could potentially lag behind the period in which we recognize the related
expense, causing a difference in recognition timing that could potentially create volatility in our reported product development and engineering expenses.
Human Capital
As of January 31, 2021, we had 1,394 full-time employees worldwide, of whom 1,027 employees were based outside of the U.S. There were 547 employees in research and development, 267 employees in sales, marketing and field services, and 198 employees in general and administrative functions. The remaining employees support operational activities, including product and test engineering, assembly, manufacturing, distribution and quality functions. Our focus on innovation gives us a unique appreciation to the importance of recruitment, retention and the professional development of our employees. We continue to focus on building a pipeline of talented individuals and creating an even more diverse and inclusive workforce. Through our established set of core values and principles, we also are focused on understanding and benefiting from the strengths that come from our diversity that should continue to contribute to our future success. Supporting and improving the local communities in which our employees are located is an important part of our culture. We seek to provide various philanthropic avenues for our employees to participate in, as well as corporate sponsored initiatives. We also strive to offer competitive total compensation and benefits packages across the 19 countries in which we are located.
Talent
Our talent strategy involves our efforts to achieve an optimal balance of internal development, supplemented by external hires. We believe this approach contributes to and enhances our employee loyalty and commitment. Furthermore, we expect our new employees to bring fresh ideas that should contribute to help drive our innovative way of thinking. We believe that our average employee tenure of 7.9 years, as of the end of fiscal year 2021, reflects the strong engagement of our employees.
Our recruiting efforts leverage both internal and external resources to recruit and attract highly skilled and talented workers across the globe, and we encourage our employees to provide referrals for open positions. We have a performance management framework which includes quarterly business and functional reviews, along with annual employee performance discussions meant to provide feedback and help with long-term employee development. We also support and develop our employees through global training and development programs targeted at building and strengthening our employees’ leadership and professional skills. These programs include the library suite of professional third party trainings spanning more than 16,000 courses. In addition, Semtech offers a comprehensive annual and new hire compliance training that focuses on diversity, anti-harassment and code of conduct.
Compensation
Our compensation program is designed to attract, reward and retain those highly-talented individuals who possess the critical skills necessary to support our business objectives, assist in the achievement of our annual strategic goals and create long-term value for our stockholders. We provide compensation packages that include a competitive base salary, annual incentive bonuses, and long-term equity awards, where permitted. We believe that a compensation program that rewards employees both for short-term and long-term performance aligns employee’s and our stockholders' interests. We believe our pay-for-performance philosophy further incentivizes the achievement of our business and individual performance goals by integrating specific compensation elements into our business plans and motivating our employees to help achieve company objectives.
Health and Wellbeing
The success of our business is fundamentally connected to the well-being of our people. We are committed to the health, safety and wellness of our employees. We provide our employees and their families with access to a variety of flexible and convenient health and welfare programs, including benefits that support their physical and mental health through tools and resources to help them improve or maintain their health status. We believe our plans and tools provide flexible choices to meet the diverse needs of our employees and their families globally. We plan to introduce additional valuable benefits that will help our employees focus on other areas such as their financial well-being.
In response to the COVID-19 pandemic, we implemented significant operating environment changes that we believed were in the best interest for the safety of our employees, and which comply with the local or regional governmental regulations. This includes having the vast majority of our employees work from home, while implementing additional safety measures for employees continuing critical, on-site work.
Diversity and Inclusion
We are committed in our efforts to increase diversity and foster an inclusive work environment that supports our global workforce and helps us provide innovative and disruptive solutions for our customers. We aim to continue improving our hiring, development, advancement and retention of diverse talent and our overall diversity representation.
We strive to promote inclusion through our stated core values and principles. We provide training to all employees to improve their understanding of behaviors that can be perceived as discriminatory, exclusionary, and/or harassing, and encourage employees to report such behaviors to management or via an anonymous hotline.
Community Involvement
We aim to contribute to the communities where we live and work, and believe that this commitment helps in our efforts to attract and retain employees. We offer our employees the opportunity to give back to their local communities or contribute to charities and provide opportunities to facilitate participation by our employees in these initiatives.
Government Regulations
We are required to comply, and it is our policy to comply, with numerous government regulations that are normal and customary to businesses in our industry and that operate in our markets and operating locations.
Our sales that serve the military and aerospace markets primarily consist of high-reliability products that are offered within our Wireless and Sensing product line that have been qualified to be sold in these markets by the U.S. Department of Defense ("DOD"). In order to maintain these qualifications, we must comply with certain specifications promulgated by the DOD. As part of maintaining these qualifications, we are routinely audited by the DOD. Based on current specifications, we believe we can maintain our qualifications for the foreseeable future. However, these specifications could be modified by the DOD in the future or we could become subject to other government requirements, which could make the manufacturing of these products more difficult and thus could adversely impact our profitability in the Wireless and Sensing operating segment. In fiscal year 2021, our sales that serve military and aerospace markets comprised 2% of our sales. A small number of special assemblies from the Wireless and Sensing product line are subject to the International Traffic in Arms Regulations ("ITAR"). We have a Technical Assistance Agreement in place that permits us to assemble certain of these products in Mexico. International shipments of products subject to ITAR require a State Department license.
As a global company, we are required to comply with various governmental trade law and export restrictions imposed by the U.S. and certain foreign jurisdictions. For example, the U.S. Department of Commerce has placed Huawei Technologies Co., Ltd. ("Huawei") and certain of its affiliates on the "Entity List" for actions contrary to the national security and foreign policy interests of the U.S. On August 17, 2020, the Department of Commerce issued a final rule that amended the Export Administration Regulations ("EAR") to expand the controls on foreign-produced direct products based on certain U.S. software and technology and sold to or for Huawei, which has further impacted our ability to ship to Huawei, as well as to certain other customers who we believe incorporate our products into their products sold to Huawei. To mitigate the adverse impact of these restrictions, we have filed for several export licenses, some of which have already been granted. Sales of our products to Huawei accounted for less than 10% of our net sales during fiscal years 2021, 2020 and 2019.
For discussion related to environmental matters, see Note 14 to the Consolidated Financial Statements.
Available Information
General information about us can be found on our website at www.semtech.com. The information on our website is for informational purposes only and should not be relied on for investment purposes. The information on our website is not incorporated by reference into this Annual Report on Form 10-K and should not be considered part of this or any other report filed with the SEC.
We make available free of charge, either by direct access on our website or a link to the SEC website, our annual report on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934, as amended (the "Exchange Act"), as soon as reasonably practicable after such reports are electronically filed with, or furnished to, the SEC. Our reports filed with, or furnished to, the SEC are also available directly at the SEC’s website at www.sec.gov.
Item 1A. Risk Factors
You should carefully consider and evaluate all of the information in this Annual Report on Form 10-K, including the risk factors listed below. If any of these risks actually occur, our business could be materially harmed. If our business is harmed, the trading price of our common stock could decline. See also “Special Note Regarding Forward Looking and Cautionary Statements” at the beginning of this Annual Report on Form 10-K.
Risks Relating to Macroeconomic and Industry Conditions
The COVID-19 pandemic is adversely affecting, and is expected to continue to adversely affect, our operations, and those of our customers, distributors, suppliers, third-party foundries and subcontractors thereby adversely affecting our business, financial condition and results of operations.
The COVID-19 pandemic negatively impacted our financial results by decreasing sales, driven by supply chain interruptions, which primarily impacted the first half of fiscal year 2021. For example, in the first quarter of fiscal year 2021, some shipments of our products were delayed due to COVID-19 related shutdowns of our plant in Reynosa, Mexico, as well as some subcontractors in Malaysia. In addition, some of our suppliers have experienced temporary reductions or closures, impacting our ability and the ability of our subcontractors to receive certain raw materials, including silicon wafers, which are essential to the manufacturing of our products. In some cases, the disruption has resulted in reduced production of our products and delays for delivery of our products to our customers. We believe the general supply chain constraints in the industry may be motivating certain customers to increase their inventory to protect against the supply risk. To the extent that this is occurring, we could experience a decrease in future demand as potential excess inventory in the supply chain is worked down.
While we cannot predict the ultimate impact of the COVID-19 virus on our business at this time, the pandemic and related efforts to mitigate the pandemic could impact our business in a number of ways, including but not limited to decreasing demand and pricing for our products as a result of the economic impact of the pandemic; disrupting our manufacturing processes, as has already occurred with the temporary reductions or closures of our facilities, third-party foundries and contractors, and the delay of supplies being received; disrupting freight infrastructure, thereby delaying shipment from vendors to assembly and test sites and shipments of our final product to customers; disrupting the manufacturing process of our customers that use our components in their products, impacting demand for our products; adversely impacting the business of our suppliers, which could result in, among other things, price increases and delays for delivery of raw materials and components needed for the production of our products; impacting our ability to maintain our workforce during this uncertain time; increasing employee absenteeism due to recommendations and/or mandates from authorities, infection or the fear of infection; possible lawsuits or additional regulatory actions due to COVID-19 spread in the workplace and potential increases in costs to implement health safety measures; suffering from reputational risk if we experience COVID-19 spread in our workplace; and adversely impacting the productivity of management and our employees that are working remotely. Additionally, there is an increased risk that we may experience cybersecurity-related events such as COVID-19 themed phishing attacks and other security challenges as a result of most of our employees and our service providers working remotely from non-corporate managed networks during the ongoing COVID-19 pandemic and potentially continuing working remotely even after the COVID-19 pandemic has subsided.
In addition, the pandemic has impacted the operations of our distributors and direct customers. Because a significant majority of our net sales is through authorized distributors, the financial health of our distributors is critical to our success. Some of our distributors are small organizations with limited working capital. Our distributors have experienced disruptions to their operations during the pandemic, including temporary reductions or closures during which they have diminished ability or are unable to sell our products. If our distributors suffer material economic harm during the pandemic, the distributors may no longer be able to continue in business or may continue in a reduced capacity. Our direct customers have also experienced, and may continue to or again experience, reductions or closures of their manufacturing facilities or an inability to obtain other components, either of which could negatively impact demand for our products that are incorporated into our customers' devices and solutions.
The ultimate magnitude of the COVID-19 pandemic, including the extent of its impact on our financial condition and results of operations, which could be material, will depend on all of the factors noted above, including other factors that we may not be able to foresee at this time.
Our future results may fluctuate, fail to match past performance or fail to meet expectations as a result of conditions beyond our control, such as general economic conditions in the markets we compete, cyclical and other conditions unique to our industry and the financial health and viability of our suppliers and customers.
Our results may fluctuate in the future, may fail to match our past performance or fail to meet our expectations and the expectations of analysts and investors as a result of conditions beyond our control. Our results and related ratios, such as gross margin, operating income percentage and effective tax rate may fluctuate as a result of general economic conditions in the countries where we sell our products; the availability of adequate supply commitments from our outside suppliers; the timing of new product introductions by us, our customers and our competitors; seasonality and variability in the computer market and our other end markets; product obsolescence; the scheduling, rescheduling or cancellation of orders by our customers; the cyclical
nature of demand for our customers’ products; our ability to predict and meet evolving industry standards and consumer preferences; our ability to develop new process technologies and achieve volume production; changes in manufacturing yields; capacity utilization; product mix and pricing; movements in exchange rates, interest rates or tax rates; our ability to integrate and realize synergies from acquisitions; the manufacturing and delivery capabilities of our subcontractors; and litigation and regulatory matters.
Uncertainty about global economic conditions can pose a risk to the overall economy by causing fluctuations to and reductions in consumer and commercial spending. Demand for our products could be different from our expectations due to many factors including changes in business and economic conditions, conditions in the credit market that affect consumer confidence, customer acceptance of our products, changes in customer order patterns, including order cancellations, and changes in the level of inventory held by vendors.
The semiconductor industry is also highly cyclical and has experienced significant downturns, which are characterized by reduced product demand, production overcapacity, increased levels of inventory, industry-wide fluctuations in the demand for semiconductors and the significant erosion of average selling prices. The cyclical nature of the semiconductor industry may cause us to experience substantial period-to-period fluctuations in our operating results.
The average selling prices of products in our markets have historically decreased rapidly and will likely do so in the future, which could harm our revenue and gross margins.
As is typical in the semiconductor industry, the average selling price of a particular product has historically declined significantly over the life of the product. In the past, we have reduced the average selling prices of our products in anticipation of future competitive pricing pressures, new product introductions by us or our competitors and other factors. We expect that we will have to similarly reduce prices in the future for older generations of products. Reductions in our average selling prices to one customer could also impact our average selling prices to all customers. A decline in average selling prices would harm our gross margins for a particular product. If not offset by sales of other products with higher gross margins, our overall gross margins may be adversely affected. Our business, results of operations, financial condition and prospects will suffer if we are unable to offset any reductions in our average selling prices by increasing our sales volumes, reducing our costs and developing new or enhanced products on a timely basis, with higher selling prices or gross margins.
Risks Relating to Production Operations
We rely on a limited number of suppliers and subcontractors, many of which are foreign-based entities, for many essential components and materials and certain critical manufacturing services and any interruption or loss of supplies or services from these entities could significantly interrupt our business operations and the production of our products.
Our reliance on a limited number of subcontractors and suppliers for wafers, packaging, testing and certain other processes involves several risks, including potential inability to obtain an adequate supply of required components and reduced control over the price, timely delivery, reliability and quality of components. These risks are attributable to several factors, including limitations on resources, labor problems, equipment failures or the occurrence of natural disasters. The good working relationships we have established with our suppliers and subcontractors could be disrupted, and our supply chain could suffer, if a supplier or subcontractor were to experience a change in control. There can be no assurance that problems will not occur in the future with suppliers or subcontractors. Disruption or termination of our supply sources or subcontractors could significantly delay our shipments and harm our business. Delays could also damage relationships with current and prospective customers. Any prolonged inability to obtain timely deliveries or quality manufacturing or any other circumstances that would require us to seek alternative sources of supply or to manufacture or package certain components internally could limit our growth and harm our business.
Many of our third-party subcontractors and suppliers, including third-party foundries that supply silicon wafers, are located in foreign countries including Taiwan, China and Israel. While our utilization of multiple third-party foundries does create some redundancy of fabrication processes, any interruption of supply by one or more of these foundries could materially impact us.
A majority of our package and test operations are performed by third-party contractors based in China, Malaysia, Taiwan, Thailand, South Korea and the Philippines. Our international business activities, in general, are subject to a variety of potential risks resulting from political and economic uncertainties. Any political turmoil or trade restrictions in these countries, particularly China, could limit our ability to obtain goods and services from these suppliers and subcontractors. The effect of an economic crisis or political turmoil on our suppliers located in these countries may impact our ability to meet the demands of our customers. For example, the COVID-19 pandemic resulted in extended shutdowns of certain of our businesses. This public health crisis or any further political developments or health concerns in markets in which our third-party contractors and suppliers are based could result in social, economic and labor instability, adversely affecting the supply of our products and, in turn, our business, financial condition and results of operations. If we find it necessary to transition the goods and services received from our existing suppliers or subcontractors to other firms, we would likely experience an increase in production costs and a delay in production associated with such a transition, both of which could have a significant negative effect on our operating results, as these risks are substantially uninsured.
Our ability to increase product sales and revenue may be constrained by the manufacturing capacity of our suppliers.
Although we provide our suppliers with rolling forecasts of our production requirements, their ability to provide wafers to us is limited by the available capacity. For example, we believe the strong increase in industry-wide demand for electronic equipment for remote work arrangements as a result of the COVID-19 pandemic has resulted, and will continue to result, in capacity shortages of our suppliers. As a result, this lack of capacity has at times constrained our product sales and revenue growth. In addition, an increased need for capacity to meet internal demands or demands of other customers could cause our suppliers to reduce capacity available to us. Our suppliers may also require us to pay amounts in excess of contracted or anticipated amounts for wafer deliveries or require us to make other concessions in order to acquire the wafer supply necessary to meet our customer requirements. If our suppliers extend lead times, limit supplies or the types of capacity we require, or increase prices due to capacity constraints or other factors, our revenue and gross margin may materially decline. We may also be required to increase the prices of our products in order to remain profitable, which could result in a loss of customers. In addition, if we experience supply delays or limitations, our customers may reduce their purchase levels with us and/or seek alternative solutions to meet their demand, which could materially and adversely impact our business and results of operations. Delays in increasing third-party manufacturing capacity may also limit our ability to meet customer demand.
Our products may be found to be defective, product liability claims may be asserted against us and we may not have sufficient liability insurance.
Manufacturing semiconductors is a highly complex and precise process, requiring production in a tightly controlled, clean environment. Minute impurities in our manufacturing materials, contaminants in the manufacturing environment, manufacturing equipment failures, and other defects can cause our products to be non-compliant with customer requirements or otherwise nonfunctional. We face an inherent business risk of exposure to warranty and product liability claims in the event that our products fail to perform as expected or such failure of our products results, or is alleged to result, in bodily injury or property damage (or both). Since a defect or failure in our product could give rise to failures in the goods that incorporate them (and consequential claims for damages against our customers from their customers), we may face claims for damages that are disproportionate to the revenues and profits we receive from the products involved.
Our general warranty policy provides for repair or replacement of defective parts. In some cases, a refund of the purchase price is offered. In certain instances, we have agreed to other warranty terms, including some indemnification provisions, which could prove to be significantly more costly than repair, replacement or refund. We attempt to limit our liability through our standard terms and conditions and negotiation of sale and other customer contracts, but there is no assurance that such limitations will be accepted or effective. While we maintain some insurance for such events, a successful warranty or product liability claim against us in excess of our available insurance coverage, if any, and established reserves, or a requirement that we participate in a product recall, would have adverse effects (that could be material) on our business, operating results and financial condition. Additionally, in the event that our products fail to perform as expected, our reputation may be damaged, which could make it more difficult for us to sell our products to existing and prospective customers and could adversely affect our business, operating results and financial condition.
Obsolete inventories as a result of changes in demand for our products and change in life cycles of our products could adversely affect our business, operating results and financial condition.
The life cycles of some of our products depend heavily upon the life cycles of the end-products into which our products are designed. End-market products with short life cycles require us to manage closely our production and inventory levels. Inventory may also become obsolete because of adverse changes in end-market demand. We may in the future be adversely affected by obsolete or excess inventories, which may result from unanticipated changes in the estimated total demand for our products or the estimated life cycles of the end-products into which our products are designed. In addition, some customers restrict how far back the date of manufacture for our products can be and certain customers may stop ordering products from us and go out of business due to adverse economic conditions; therefore, some of our product inventory may become obsolete and, thus, adversely affect our business, operating results and financial condition.
Business interruptions, such as natural disasters, acts of violence and the outbreak of contagious diseases, could harm our business and have a material adverse effect on our operations.
Earthquakes and other natural disasters, terrorist attacks, armed conflicts, wars and other acts of violence, and other national or international crisis, calamity or emergency, including the outbreak of pandemic or contagious disease, such as COVID-19, may result in interruption to the business activities of us, our suppliers and our customers and overall disruption of the economy at many levels. These events may directly impact our physical facilities or those of our customers and suppliers. Additionally, these events may cause some of our customers or potential customers to reduce the level of expenditures on their services and products that ultimately may reduce our revenue. The consequences of these reductions are unpredictable, and we may not be able to foresee events that could have an adverse effect on our business.
Our corporate headquarters, a portion of our assembly and research and development activities, and certain other critical business operations are located near major earthquake fault lines. We do not maintain earthquake insurance and our business
could be harmed in the event of a major earthquake. We generally do not maintain flood coverage, including for our Asian locations where certain of our operations support and sales offices are located. Such flood coverage has become very expensive; as a result we have elected not to purchase this coverage. If one of these locations were to experience a major flood, our business may be harmed.
We operate a manufacturing facility in Reynosa, Mexico. Historically, certain regions in Mexico have experienced high levels of violence. Any significant disruption of our operations at this facility could materially affect our ability to generate revenues for certain products within our Wireless and Sensing operating segment. Some of the products that we produce at this facility require certification by the Defense Contract Audit Agency ("DCAA"). Failure to secure or maintain the required certification, either directly through the DCAA or through a qualifying third party would materially affect our authorization to manufacture applicable products at this facility, and our revenue for certain products within our Wireless and Sensing products line could materially decline.
Our business could also be harmed if natural disasters, acts of violence, national or international crises or other calamities or emergencies interrupt the production of wafers by our suppliers, the assembly and testing of products by our subcontractors, or the operations of our distributors and direct customers. We rely on third-party freight firms for nearly all of our shipments from vendors to assembly and test sites, primarily in Asia, and for shipments of our final product to customers. This includes ground and air transportation. Any significant disruption of such freight business globally or in certain parts of the world, particularly where our operations are concentrated, could materially and adversely affect our ability to generate revenues.
The ultimate impact of business interruption events, both in terms of direct impact on us and our supply chain, as well as on our end customers (to include their own supply chain issues as well as end-market issues), may not be known for a considerable period of time following the event. We maintain some business interruption insurance to help reduce the effect of business interruptions, but we are not fully insured against such risks. Also as a result of these events, insurance premiums for businesses may increase and the scope of coverage may be decreased. Consequently, we may not be able to obtain adequate insurance coverage for our business and properties. Further, any loss of revenue due to a slowdown or cessation of end customer demand is uninsured. Accordingly, any of these disruptions could significantly harm our business.
Risks Relating to Research and Development, Engineering, Intellectual Property and New Technologies
We may be unsuccessful in developing and selling new products, which is central to our objective of maintaining and expanding our business.
We operate in a dynamic environment characterized by price erosion, rapid technological change, and design and other technological obsolescence. Our competitiveness and future success depend on our ability to predict and adapt to these changes in a timely and cost-effective manner by designing, developing, manufacturing, marketing and providing support for our own new products and technologies. A failure to achieve design wins, to introduce these new products in a timely manner, or to achieve market acceptance for these products on commercially reasonable terms could harm our business.
The introduction of new products presents significant business challenges because product development commitments and expenditures must be made well in advance of product sales. The success of a new product depends on accurate forecasts of long-term market demand and future technological developments, as well as on a variety of specific implementation factors, including: timely and efficient completion of technology, product and process design and development; timely and efficient implementation of manufacturing, assembly, and test processes; the ability to secure and effectively utilize fabrication capacity in different geometries; product performance; product quality and reliability; and effective marketing, sales and service.
The efforts to achieve design wins typically are lengthy and can require us to both incur design and development costs and dedicate scarce engineering resources in pursuit of a single customer opportunity. We may not prevail in the competitive selection process, and even if we are able to develop products and achieve design wins, the design wins may never generate revenues if end-customer projects are unsuccessful in the marketplace or the end-customer terminates the project, which may occur for a variety of reasons. Mergers and consolidations among customers may lead to termination of certain projects before the associated design win generates revenue. If design wins do generate revenue, the time lag between the design win and meaningful revenue can be uncertain and could be significant. If we fail to develop products with required features or performance standards or experience even a short delay in bringing a new product to market, or if our customers fail to achieve market acceptance of their products, our business, financial condition and operating results could be materially and adversely impacted.
Our customers require our products to undergo a lengthy and expensive qualification process without any assurance of product sales.
Prior to purchasing our products, many of our customers require that our products undergo an extensive qualification process, which involves testing of the products in the customer's system as well as rigorous reliability testing. This qualification process may continue for six months or longer. However, qualification of a product by a customer does not ensure any sales of the product to that customer. Even after successful qualification and sales of a product to a customer, a subsequent revision to the
product or software, changes in the manufacturing process or the selection of a new supplier by us may require a new qualification process, which may result in delays and in us holding excess or obsolete inventory. After our products are qualified, it can take an additional six months or more before the customer commences volume production of components or devices that incorporate our products. Despite these uncertainties, we devote substantial resources, including design, engineering, sales, marketing and management efforts, toward qualifying our products with customers in anticipation of sales. If we are unsuccessful or delayed in qualifying any of our products with a customer, such failure or delay would preclude or delay sales of such product to the customer, which may impede our growth and cause our business to suffer.
Our products may fail to meet new industry standards or requirements and the efforts to meet such industry standards or requirements could be costly.
Many of our products are based on industry standards that are continually evolving. Our ability to compete in the future will depend in part on our ability to anticipate, identify and ensure compatibility or compliance with these evolving industry standards. The emergence of new industry standards could render our products incompatible with products developed by our customers and potential customers. As a result, we could be required to invest significant time and effort and to incur significant expense to redesign our products to ensure compliance with relevant standards. If our products are not in compliance with prevailing industry standards or requirements, we could miss opportunities to achieve crucial design wins which in turn could have a material adverse effect on our business, operating results and financial conditions.
We may be unable to adequately protect our intellectual property rights.
We pursue patents for some of our new products and unique technologies, but we rely primarily on trade secret protections through a combination of nondisclosure agreements and other contractual provisions, as well as our employees’ commitment to confidentiality and loyalty, to protect our know-how and processes. We intend to continue protecting our proprietary technology, including through trademark and copyright registrations and patents. Despite this intention, we may not be successful in achieving adequate protection. Our failure to adequately protect our material know-how and processes could harm our business. There can be no assurance that the steps we take will be adequate to protect our proprietary rights, that our patent applications will lead to issued patents, that others will not develop or patent similar or superior products or technologies, or that our patents will not be challenged, invalidated, or circumvented by others. Furthermore, the laws of the countries in which our products are or may be developed, manufactured or sold may not protect our products and intellectual property rights to the same extent as laws in the U.S.
We may suffer losses and business interruption if our products infringe the intellectual property rights of others.
The semiconductor industry is characterized by frequent claims of infringement and litigation regarding patent and other intellectual property rights. Due to the number of competitors, intellectual property infringement is an ongoing risk since other companies in our industry could have intellectual property rights that may not be identifiable when we initiate development efforts. Litigation may be necessary to enforce our intellectual property rights and we may have to defend ourselves against infringement claims. Any such litigation could be very costly and may divert our management’s resources. If one of our products is found to infringe on a third party’s rights, we may have liability for past infringement and may need to seek a license to use such intellectual property going forward. If a license is not available or if we are unable to obtain a license on terms acceptable to us, we would either have to change our product so that it does not infringe or stop making the product.
We must commit resources to product production prior to receipt of purchase commitments and could lose some or all of the associated investment.
Sales are made primarily on a current delivery basis, pursuant to purchase orders that may be revised or cancelled by our customers without penalty, rather than pursuant to long-term contracts. Some contracts require that we maintain inventories of certain products at levels above the anticipated needs of our customers. As a result, we must commit resources to the production of products without binding purchase commitments from customers. Our inability to sell products after we devote significant resources to them could harm our business.
While we intend to continue to invest in research and development, we may be unable to make the substantial investments that are required to remain competitive in our business.
The semiconductor industry requires substantial investment in research and development in order to bring to market new and enhanced solutions. Our research and development expense was $117.5 million, $107.4 million and $109.0 million, which represent 20%, 20% and 17% of net sales, respectively, in fiscal years 2021, 2020 and 2019, respectively. We expect to strategically increase our research and development expenditures as compared to prior periods. We are unable to predict whether we will have sufficient resources to maintain the level of investment in research and development required to remain competitive. The added costs could prevent us from being able to maintain a technology advantage over larger competitors that have significantly more resources to invest in research and development. In addition, we cannot assure you that the technologies which are the focus of our research and development expenditures will become commercially successful or generate any revenue.
Certain software we use is from open source code sources, which, under certain circumstances, may lead to unintended consequences and, therefore, could materially adversely affect our business, financial condition, operating results and cash flow.
We use open source software in connection with certain of our products and services, and we intend to continue to use open source software in the future. From time to time, there have been claims challenging the ownership of open source software against companies that incorporate open source software into their products or services or alleging that these companies have violated the terms of an open source license. As a result, we could be subject to lawsuits by parties claiming ownership of what we believe to be open source software or alleging that we have violated the terms of an open source license. Litigation could be costly for us to defend, have a negative effect on our operating results and financial condition or require us to devote additional research and development resources to change our solutions. In addition, if we were to combine our proprietary software solutions with open source software in certain manners, we could, under certain open source licenses, be required to publicly release the source code of our proprietary software solutions. If we inappropriately use open source software, we may be required to re-engineer our solutions, discontinue the sale of our solutions, release the source code of our proprietary software to the public at no cost or take other remedial actions. There is a risk that open source licenses could be construed in a way that could impose unanticipated conditions or restrictions on our ability to commercialize our solutions, which could adversely affect our business, operating results and financial condition.
We may need to transition to smaller geometry process technologies and achieve higher levels of design integration to remain competitive and may experience delays in this transition or fail to efficiently implement this transition.
In order to remain competitive, we expect to continue to transition our products to increasingly smaller geometries. This transition requires us to modify the manufacturing processes for our products, to design new products to more stringent standards and to redesign some existing products. In some instances, we depend on our relationship with our third-party foundries to transition to smaller geometry processes successfully. Our foundries may not be able to effectively manage the transition or we may not be able to maintain our foundry relationships. If our foundries or we experience significant delays in this transition or fail to efficiently implement this transition, our business, financial condition and results of operations could be materially and adversely affected. As smaller geometry processes become more prevalent, we expect to continue to integrate greater levels of functionality into our products. However, we may not be able to achieve higher levels of design integration or deliver new integrated products on a timely basis or at all.
Risks Relating to International Operations
We are subject to export restrictions and laws affecting trade and investments, which may limit our ability to sell to certain customers.
As a global company headquartered in the U.S., we are subject to U.S. laws and regulations that limit and restrict the export of some of our products and services and may restrict our transactions with certain customers, business partners and other persons, including, in certain cases, dealings with or between our U.S. employees and subsidiaries. In certain circumstances, export control and economic sanctions regulations may prohibit the export of certain products, services and technologies, and in other circumstances we may be required to obtain an export license or other authorization before entering into a transaction or transferring a controlled item. We maintain an economics sanction and export compliance program but there are risks that the compliance controls could be circumvented, exposing us to legal liabilities. We must also comply with export restrictions and laws imposed by other countries affecting trade and investments. These restrictions and laws have significantly restricted our operations in the recent past and may continue to do so in the future.
For example, in 2019, the U.S. Department of Commerce placed Huawei and certain of its affiliates to the "Entity List" for actions contrary to the national security and foreign policy interests of the U.S. In 2020, the U.S. Department of Commerce amended the EAR to expand the controls on foreign-produced direct products based on certain U.S. software and technology and sold to or for Huawei, which further impacted our ability to ship to Huawei, as well as to certain other customers who we believe incorporate our products into their products sold to Huawei. Sales of our products to Huawei accounted for less than 10% of our net sales during fiscal year 2021. As of the date of this report, we are unable to predict the duration of the export restrictions imposed on Huawei and the corresponding future effects on our business.
These actions by the U.S. Department of Commerce or future regulatory activity may materially interfere with our ability to make sales to Huawei or other foreign customers. Huawei and other foreign customers affected by future U.S. government export control measures or sanctions or threats of export control measures or sanctions may respond by developing their own solutions to replace our products or by adopting our foreign competitors’ solutions. In addition, our association with customers that are or become subject to U.S. regulatory scrutiny or export restrictions could subject us to actual or perceived reputational harm among current or prospective investors, suppliers or customers, customers of our customers, other parties doing business with us, or the general public. Any such reputational harm could result in the loss of investors, suppliers or customers, which could harm our business, financial condition, operating results or prospects.
We sell and trade with foreign customers, which subjects our business to increased risks.
Sales to foreign customers accounted for approximately 90% of net sales for fiscal year 2021. Sales to our customers located in China (including Hong Kong) and South Korea constituted 60% and 7%, respectively, of net sales for fiscal year 2021. International sales are subject to certain risks, including unexpected changes in regulatory requirements, tariffs and other barriers, political and economic instability, difficulties in accounts receivable collection, difficulties in managing distributors and representatives, difficulties in staffing and managing foreign subsidiary and branch operations and potentially adverse tax consequences. Other risks include local business and cultural factors that may differ from our domestic standards and practices, including business practices from which we are prohibited from engaging by the Foreign Corrupt Practices Act and other anti-corruption laws and regulations, laws of certain foreign countries that may not protect our products, assets or intellectual property rights to the same extent as do U.S. laws, and difficulties enforcing contracts in such foreign countries generally. These factors may harm our business. Our use of the Semtech name may be prohibited or restricted in some countries, which may negatively impact our sales efforts.
A substantial portion of our sales is derived from China and adverse changes to general economic conditions in China could have a material and adverse impact on our sales and financial results.
In fiscal year 2021, sales to customers in China comprised 60% of our net sales. The economic slowdown in China could adversely affect our sales to customers in China and consequently, our business, operating results and financial condition. In addition, there are risks that the Chinese government may, among other things, require the use of local suppliers, compel companies that do business in China to partner with local companies to conduct business, or provide incentives to government-backed local customers to buy from local suppliers rather than companies like ours, all of which could adversely impact our business, operating results and financial condition. Further, changes in U.S. and global social, political, regulatory and economic conditions or in laws and policies governing trade with China could adversely affect our business.
We and our manufacturing partners are or will be subject to extensive Chinese government regulation, and the benefit of various incentives from Chinese governments that we and our manufacturing partners receive may be reduced or eliminated, which could increase our costs or limit our ability to sell products and conduct activities in China.
Many of our manufacturing partners are located in China. The Chinese government has broad discretion and authority to regulate the technology industry in China. Additionally, China’s government has implemented policies from time to time to regulate economic expansion in China. It exercises significant control over China’s economic growth through the allocation of resources, controlling payment of foreign currency-denominated obligations, setting monetary policy and providing preferential treatment to particular industries or companies.
Any additional new regulations or the amendment or modification of previously implemented regulations could require us and our manufacturing partners to change our business plans, increase our costs, or limit our ability to sell products and conduct activities in China, which could adversely affect our business and operating results.
The Chinese government and provincial and local governments also have provided, and continue to provide, various incentives to encourage the development of the semiconductor industry in China. Such incentives include tax rebates, reduced tax rates, favorable lending policies and other measures, some or all of which may be available to our manufacturing partners and to us with respect to our facilities in China. Any of these incentives could be reduced or eliminated by governmental authorities at any time. Any such reduction or elimination of incentives currently provided to us and our manufacturing partners could adversely affect our business and operating results.
Our foreign currency exposures may change over time as the level of activity in foreign markets grows and could have an adverse impact upon financial results.
As a global enterprise, we face exposure to adverse movements in foreign currency exchange rates. Certain of our assets, including certain bank accounts, exist in non-U.S. Dollar-denominated currencies, which are sensitive to foreign currency exchange rate fluctuations. The non-U.S. Dollar-denominated currencies are principally the Swiss Franc, Euro, Canadian Dollar, Mexican Peso, Japanese Yen and Great British Pound. We also have a significant number of employees that are paid in foreign currency, the largest groups being United Kingdom-based employees who are paid in Great British Pound, Switzerland-based employees who are paid in Swiss Francs, Canada-based employees who are paid in Canadian Dollars, China-based employees who are paid in Chinese Renminbi and Mexican nationals who are paid in Mexican Pesos.
If the value of the U.S. Dollar weakens relative to these specific currencies, as it has done in recent years, the cost of doing business in terms of U.S. Dollars rises. Whereas if the value of the U.S. Dollar strengthens relative to these specific currencies, it could make the pricing of our products less competitive and affect demand for our products. With the growth of our international business, our foreign currency exposures may grow and under certain circumstances, could harm our business. As a means of managing our foreign exchange exposure, we routinely convert U.S. Dollars into foreign currency in advance of the expected payment. We regularly assess whether or not to hedge foreign exchange exposure.
We may be subject to increased tax liabilities and an increased effective tax rate if we need to remit funds held by our foreign subsidiaries.
As of January 31, 2021, our foreign subsidiaries held $825.9 million of unremitted foreign earnings. With the enactment of the Tax Cuts and Jobs Act (“Tax Act”), all post-1986 previously unremitted earnings for which no U.S. deferred tax liability had been accrued were subject to U.S. tax. Notwithstanding the U.S. taxation of these amounts, we have determined that $547.9 million of foreign earnings (“Reinvested Funds”) will continue to be reinvested indefinitely outside of the U.S. As a result, we have not recorded a provisional income tax expense for these amounts because we believe that we currently have the ability to keep those earnings indefinitely invested and we have specific plans for reinvestment of these undistributed foreign earnings. In connection with the enactment of the Tax Act, we elected to remit approximately $240.0 million of foreign earnings, which was completed in fiscal year 2021. In the second quarter of fiscal year 2021, we determined that an additional $50 million will not be permanently reinvested. As a result, we have established a deferred income tax liability for the Swiss withholding tax that will be due upon distribution of these earnings. If we needed to remit all or a portion of our Reinvested Funds to the U.S. for investment in our domestic operations, any such remittance could result in increased tax liabilities and a higher effective tax rate.
Risks Relating to Sales, Marketing and Competition
We receive a significant portion of our revenues from a small number of customers and the loss of any one of these customers or failure to collect a receivable from them could adversely affect our business.
Our largest customers have varied from year to year. Historically, we have had significant customers that individually accounted for 10% or more of consolidated revenues in certain quarters or years or represented 10% or more of net accounts receivables at any given date. Sales to our customers are generally made on open account, subject to credit limits we may impose, and the receivables are subject to the risk of being uncollectible.
We believe that our operating results for the foreseeable future will continue to depend on sales to a relatively small number of customers and end customers. We may not be able to maintain or increase sales to some of our top customers for a variety of reasons, including that our agreements with our customers do not require them to purchase a minimum quantity of our products; some of our customers can stop incorporating our products into their own products with limited notice to us and suffer little or no penalty; and many of our customers have pre-existing or concurrent relationships with our current or potential competitors that may affect the customers’ decisions to purchase our products. The loss of a major customer, a reduction in sales to any major customer or our inability to attract new significant customers could seriously impact our revenue and materially and adversely affect our business, financial condition and results of operations.
The volatility of customer demand limits our ability to predict future levels of sales and profitability.
We primarily conduct our sales on a purchase order basis, rather than pursuant to long-term contracts. The loss of any significant customer, any material reduction in orders by any of our significant customers, the cancellation of a significant customer order or the cancellation or delay of a customer’s significant program or product could harm our business.
Semiconductor suppliers can rapidly increase production output in response to slight increases in demand, leading to a sudden oversupply situation and a subsequent reduction in order rates and revenues as customers adjust their inventories to account for shorter lead times. Conversely, when circumstances create longer lead times customers may order in excess of what they need to ensure availability, then cancel orders if lead times are reduced. A rapid and sudden decline in customer demand for products or cancellation of orders can result in excess quantities of certain products relative to demand. Should this occur, our operating results may be adversely affected as a result of charges to reduce the carrying value of our inventory to the estimated demand level or market price. Our quarterly revenues are highly dependent upon turns fill orders (orders booked and shipped in the same quarter). The short-term and volatile nature of customer demand makes it extremely difficult to accurately predict near term revenues and profits.
Most of our authorized distributors, which collectively represent more than half of our net sales, can terminate their contract with us with little or no notice. The termination of a distributor could negatively impact our business, including net sales and accounts receivable.
In fiscal year 2021, authorized distributors accounted for approximately 82% of our net sales. We generally do not have long-term contracts with our distributors and most can terminate their agreement with us with little or no notice. For fiscal year 2021, our largest distributors were based in Asia. The termination of any of our distributor relationships could impact our net sales and limit our access to certain end-customers. It could also result in the return of excess inventory of our product held by that distributor. Since many distributors simply resell finished products, they generally operate on very thin profit margins. If a distributor were to terminate an agreement with us or go out of business, our accounts receivable from the particular distributor would be subject to significant collection risk. Our reliance on distributors also subjects us to a number of additional risks, including: write-downs in inventories associated with stock rotation rights and increases in provisions for price adjustments granted to certain distributors; potential reduction or discontinuation of sales of our products by distributors; failure to devote
resources necessary to sell our products at the prices, in the volumes and within the time frames that we expect; dependence upon the continued viability and financial resources of these distributors, some of which are small organizations with limited working capital and all of which depend on general economic conditions and conditions within the semiconductor industry; dependence on the timeliness and accuracy of shipment forecasts and resale reports from our distributors; and management of relationships with distributors, which can deteriorate as a result of conflicts with efforts to sell directly to our end customers. If any significant distributor becomes unable or unwilling to promote and sell our products, or if we are not able to renew our contracts with the distributors on acceptable terms, we may not be able to find a replacement distributor on reasonable terms or at all and our business could be harmed.
Our inability to effectively control the sales of our products on the gray market could have a material adverse effect on us.
We market and sell our products directly to OEMs and through authorized third-party distributors. From time to time, it is possible our products could be diverted from our authorized distribution channels and customers may purchase products from the unauthorized "gray market." Gray market products result in shadow inventory that is not visible to us, thus making it difficult to forecast demand accurately. Also, when gray market products enter the market, we and our distribution channels compete with these discounted gray market products, which adversely affects demand for our products and negatively impacts our margins. In addition, our inability to control gray market activities could result in customer satisfaction issues because when products are purchased outside of our authorized distribution channels there is a risk that our customers are buying products that may have been altered, mishandled or damaged, or are used products represented as new.
Risks Relating to Governmental Regulations
Changes in government trade policies could have an adverse impact on our business or the business of our customers, which may materially adversely affect our business operations, sales or gross margins.
The U.S. government has made statements and taken certain actions that have led to, and may lead to, further changes to U.S. and international trade policies, including tariffs affecting certain products exported by a number of U.S. trading partners, including China. In response, many U.S. trading partners, including China, have imposed or proposed new or higher tariffs on U.S. products. The tariffs imposed by the U.S. on products imported from China include parts and materials used in semiconductor manufacturing and could have the effect of increasing the cost of materials we use to manufacture certain products, which could result in lower margins. The U.S. government has also taken actions targeting exports of certain technologies to China which could lead to additional restrictions on the export of products that include or enable certain technologies, including products we provide to China-based customers. In addition, the geopolitical headwinds driven by export restrictions and tariffs imposed by the U.S. government may weaken demand for our products.
We cannot predict what further actions may ultimately be taken with respect to tariffs or trade relations between the U.S. and other countries, what products may be subject to such actions, or what actions may be taken by the other countries in retaliation. Accordingly, it is difficult to predict exactly how, and to what extent, such actions may impact our business, or the business of our customers, partners or vendors. Any unfavorable government policies on international trade, such as capital controls or tariffs, may further affect the demand for our products, increase the cost of components, delay production, impact the competitive position of our products or prevent us from being able to sell products in certain countries, and may have a material adverse effect on our business, operating results and financial condition. Any resulting trade wars could have a significant adverse effect on world trade and global economic conditions and could adversely impact our revenues, gross margins and business operations.
We are subject to government regulations and other standards that impose operational and reporting requirements.
We, our suppliers, and our customers are subject to a variety of U.S. federal, foreign, state and local governmental laws, rules and regulations, including laws, rules and regulations governing data privacy protections for personal information, and corrupt practices/anti-bribery prohibitions, that impact our business in terms of ongoing monitoring of compliance. Legislation and related regulations in the U.K. under that country’s Bribery Act could have extra-territorial application of compliance standards that may be inconsistent with comparable U.S. law, requiring us to re-evaluate and amend our compliance programs, policies and initiatives. The General Data Protection Regulation ("GDPR") is a comprehensive update to the data protection regime in the European Economic Area that became effective as of May 25, 2018. In addition, the California Consumer Privacy Act (“CCPA”), which enhances privacy rights and consumer protection for residents of California, became effective as of January 1, 2020. The cost of compliance with the GDPR and the CCPA and the potential for fines and penalties in the event of a breach may have an adverse effect on our operations.
The SEC and The Nasdaq Stock Market LLC ("Nasdaq") have revised, and continue to revise, their regulations and listing standards. These developments have increased, and may continue to increase, our legal compliance and financial reporting costs. These developments also may make it more difficult and more expensive for us to obtain director and officer liability insurance, and we may be required to accept reduced coverage or incur substantially higher costs to obtain coverage. This, in
turn, could make it more difficult for us to attract and retain qualified members of our Board of Directors, or qualified executive officers.
Failure to comply with present or future laws, rules and regulations of any kind that govern our business could result in suspension of all or a portion of production, cessation of all or a portion of operations, or the imposition of significant regulatory, administrative, civil, or criminal penalties or sanctions, any of which could harm our business.
Our failure to comply with any applicable environmental regulations could result in a range of consequences, including fines, suspension of production, excess inventory, sales limitations, and criminal and civil liabilities.
We are subject to various state, federal and international laws and regulations governing the environment, including those restricting the presence of certain substances in electronic products and making producers of those products financially responsible for the collection, treatment, recycling and disposal of those products and those related to the use, storage, handling, discharge or disposal of certain toxic, volatile or otherwise hazardous chemicals and the incorporation of such substances into products available for sale. If we or our suppliers were to incur substantial additional expenses to acquire equipment or otherwise comply with environmental regulations, product costs could significantly increase, thus harming our business. If we violate or fail to comply with any of them, a range of consequences could result, including fines, import/export restrictions, sales limitations, criminal and civil liabilities or other sanctions. We could also be held liable for any and all consequences arising out of exposure to hazardous materials used, stored, released, disposed of by us or located at, under or emanating from our facilities or other environmental or natural resource damage. We have incurred, and may continue to incur, liabilities under various statutes for the cleanup of pollutants at locations we have operated and at third-party disposal and recycling sites we have used.
Environmental laws are complex, change frequently and have tended to become more stringent over time. For example, the E.U. and China are two among a growing number of jurisdictions that have enacted in recent years restrictions on the use of lead, among other chemicals, in electronic products. These regulations affect semiconductor packaging. There is a risk that the cost, quality and manufacturing yields of lead-free products may be less favorable compared to lead-based products or that the transition to lead-free products may produce sudden changes in demand, which may result in excess inventory. Future environmental legal requirements may become more stringent or costly and our compliance costs and potential liabilities arising from past and future releases of, or exposure to, hazardous substances may harm our business and our reputation.
Certain of our customers and suppliers require us to comply with their codes of conduct, which may include certain restrictions that may substantially increase our cost of doing business as well as have an adverse effect on our operating efficiencies, operating results and financial condition.
Certain of our customers and suppliers require us to agree to comply with their codes of conduct, which may include detailed provisions on labor, human rights, health and safety, environment, corporate ethics and management systems. Certain of these provisions are not requirements under the laws of the countries in which we operate and may be burdensome to comply with on a regular basis. Moreover, new provisions may be added or material changes may be made to any these codes of conduct, and we may have to promptly implement such new provisions or changes, which may substantially further increase the cost of our business, be burdensome to implement and adversely affect our operational efficiencies and operating results. If we violate any such codes of conduct, we may lose further business with the customer or supplier and, in addition, we may be subject to fines from the customer or supplier. While we believe that we are currently in compliance with our customers and suppliers’ codes of conduct, there can be no assurance that, from time to time, if any one of our customers and suppliers audits our compliance with such code of conduct, we would be found to be in full compliance. A loss of business from these customers or suppliers could have a material adverse effect on our business, operating results and financial condition.
Our operating results could be adversely affected as a result of changes in our effective tax rates, the adoption of new U.S. or foreign tax legislation or exposure to additional tax liabilities, or by material differences between our forecasted annual effective tax rates and actual tax rates.
Our future effective tax rates could be affected by changes in the mix of earnings in countries with differing statutory tax rates, changes in the valuation of deferred tax assets and liabilities, or changes in applicable tax laws or their interpretation. We are also subject to the examination of our tax returns and other tax matters by the Internal Revenue Service of the U.S. ("IRS") and other tax authorities and governmental bodies. We regularly assess the likelihood of an adverse outcome resulting from these examinations to determine the adequacy of our provision for taxes. There can be no assurance as to the outcome of these examinations. If our effective tax rates were to increase, particularly in the U.S., Canada or Switzerland, or if the ultimate determination of taxes owed is for an amount in excess of amounts previously accrued, our operating results, cash flows, and financial condition could be adversely affected. See the risk factor captioned "We may be subject to increased tax liabilities and an increased effective tax rate if we need to remit funds held by our foreign subsidiaries" above.
In October 2015, the Organization for Economic Co-operation and Development, an international association of 34 countries, including the U.S., released the final reports from its Base Erosion and Profit Shifting ("BEPS") Action Plans. The BEPS recommendations covered a number of issues, including country-by-country reporting, permanent establishment rules, transfer
pricing rules and tax treaties. Although the BEPS recommendations are not themselves changes in tax law, this guidance has resulted in unilateral action by several member countries and is also prompting possible amendment of other countries’ tax laws and regulations on a prospective and potentially retroactive basis. In October 2015, the European Commission concluded that certain member countries had granted unlawful rulings that artificially reduced tax burdens and has ordered the recovery of the unpaid taxes. Future tax law changes resulting from these developments may result in changes to long-standing tax principles, which could adversely affect our effective tax rate or result in higher cash tax liabilities.
Significant judgment is required in the calculation of our tax provision and the resulting tax liabilities as well as determination of our ability to realize our deferred tax assets. Our estimates of future taxable income and the regional mix of this income can change as new information becomes available. Any such changes in our estimates or assumptions can significantly impact our tax provision in a given period by, for example, requiring us to impair existing deferred tax assets. Such required changes could result in us having to restate our consolidated financial statements. Restatements are generally costly and could adversely impact our operating results or have a negative impact on the trading price of our common stock.
We may be subject to taxation and review of our compliance with income, value-added and other sales-type tax regulations in other jurisdictions which could negatively affect our operations.
As a global organization, we may be subject to a variety of transfer pricing or permanent establishment challenges by taxing authorities in various jurisdictions. If certain of our non-U.S. activities were treated as carrying on business as a permanent establishment and therefore, subject to income tax in such jurisdiction, our operating results could be materially adversely affected.
We are required to comply with rules regarding value-added taxes and other sales-type taxes in various jurisdictions. If these taxes are not properly collected and paid, our operating results could be materially adversely affected.
We have limited experience with government contracting, which entails differentiated business risks.
Although such contracts have not constituted a material portion of our revenue in the past, we may from time-to-time derive revenue from contracts and subcontracts with agencies of, or prime or secondary contractors to, the U.S. government, including U.S. military agencies. Consequently, we are subject to certain business risks that are particular to companies that contract with U.S. government agencies. These risks include the ability of the U.S. government or related contractors to unilaterally: terminate contracts at its convenience; terminate, modify or reduce the value of existing contracts, if there are budgetary constraints or needed changes; cancel multi-year contracts and related orders, if funds become unavailable; adjust contract costs and fees on the basis of audits performed by U.S. government agencies; control and potentially prohibit the export of our products; require that we continue to supply products despite the expiration of a contract under certain circumstances; require that we fill certain types of rated orders for the U.S. government prior to filling any orders for other customers; and suspend us from receiving new contracts pending resolution of any alleged violations of procurement laws or regulations. In addition, because we may enter into defense industry contracts with respect to products that are sold both within and outside of the U.S., we are subject to the following additional risks in connection with government contracts: the need to bid on programs prior to completing the necessary design, which may result in unforeseen technological difficulties, delays and/or cost overruns; the difficulty in forecasting long-term costs and schedules and the potential obsolescence of products related to long-term fixed price contracts; and the need to transfer and obtain security clearances and export licenses, as appropriate.
Corporate responsibility, specifically related to environmental, social and governance (“ESG”) matters, may impose additional costs and expose us to new risks.
Public ESG and sustainability reporting is becoming more broadly expected by investors, shareholders and other third parties. Certain organizations that provide corporate governance and other corporate risk information to investors and shareholders have developed, and others may in the future develop, scores and ratings to evaluate companies and investment funds based upon ESG or “sustainability” metrics. Many investment funds focus on positive ESG business practices and sustainability scores when making investments and may consider a company’s ESG or sustainability scores as a reputational or other factor in making an investment decision. In addition, investors, particularly institutional investors, use these scores to benchmark companies against their peers and if a company is perceived as lagging, these investors may engage with such company to improve ESG disclosure or performance and may also make voting decisions, or take other actions, to hold these companies and their boards of directors accountable. Board diversity is an ESG topic that is, in particular, receiving heightened attention by investors, shareholders, lawmakers and listing exchanges. Certain states have passed laws requiring companies to meet certain gender and ethnic diversity requirements on their boards of directors. We may face reputational damage in the event our corporate responsibility initiatives or objectives, including with respect to board diversity, do not meet the standards set by our investors, shareholders, lawmakers, listing exchanges or other constituencies, or if we are unable to achieve an acceptable ESG or sustainability rating from third party rating services. A low ESG or sustainability rating by a third-party rating service could also result in the exclusion of our common stock from consideration by certain investors who may elect to invest with our competition instead. Ongoing focus on corporate responsibility matters by investors and other parties as described above may impose additional costs or expose us to new risks.
Risks Relating to our Business Strategies, Personnel and Other Operations
The loss of any of our key personnel or the failure to attract or retain specialized technical and management personnel could impair our ability to grow our business.
Our future success depends upon our ability to attract and retain highly qualified technical, marketing and managerial personnel. We are dependent on a relatively small group of key technical personnel with analog and mixed-signal expertise. Personnel with highly skilled managerial capabilities, and analog and mixed-signal design expertise, are scarce and competition for personnel with these skills is intense. There can be no assurance that we will be able to retain key employees or that we will be successful in attracting, integrating or retaining other highly qualified personnel in the future. If we are unable to retain the services of key employees or are unsuccessful in attracting new highly qualified employees, our business could be harmed.
We face risks associated with companies we have acquired in the past and may acquire in the future.
We have expanded our operations through strategic acquisitions, and we may continue to expand and diversify our operations with additional acquisitions. Acquisitions may divert management attention and resources from other business objectives. Acquisitions have used and could use in the future a significant portion of our available liquid assets or we could incur debt or issue equity securities to fund acquisitions. Issuance of equity securities could be dilutive to existing stockholders. Debt financing could subject us to restrictive covenants that could have an adverse effect on our business. Although we undertake detailed reviews of proposed acquisition candidates and attempt to negotiate acquisition terms favorable to us, we may encounter difficulties or incur liabilities for which we have no recourse. We cannot provide any assurance that any acquisition will have a positive impact on our future performance.
If we are unsuccessful in integrating acquired companies into our operations or if integration is more difficult than anticipated, then we may not achieve anticipated cost savings or synergies and may experience disruptions that could harm our business. Acquisitions could have a negative impact on our future earnings by way of poor performance by the acquired company or, if we later conclude we are unable to use or sell an acquired product or technology, we could be required to write down the related intangible assets and goodwill.
We may be required to recognize additional impairment charges in the future which could have an adverse effect on our financial condition and operating results.
We assess our goodwill, other intangible assets and our long-lived assets on an annual basis and whenever events or changes in circumstances indicate the carrying value of our assets may not be recoverable, and as and when required by accounting principles generally accepted in the U.S. ("GAAP") to determine whether they are impaired. During fiscal years 2021, 2020 and 2019, we recorded $6.8 million, $1.2 million and $30.0 million of non-cash impairment charges and credit loss reserves on certain of our investments. Future restructuring or appraisal of our business impacting fair value of our assets or changes in estimates of our future cash flows could affect our impairment analysis in future periods and cause us to record either an additional expense for impairment of assets previously determined to be partially impaired or record an expense for impairment of other assets. Depending on future circumstances, we may never realize the full value of intangible assets. Any future determination or impairment of a significant portion of our goodwill and other intangibles could have an adverse effect on our financial condition and operating results.
Restrictive covenants in the Credit Agreement governing the Credit Facility may restrict our ability to pursue our business strategies.
The Credit Agreement contains a number of restrictive covenants that impose significant operating and financial restrictions on us and may limit our ability to engage in acts that may be in our long-term best interests. The Credit Agreement includes covenants restricting, among other things, our and our subsidiaries’ ability to: incur or guarantee additional debt or issue certain preferred stock; pay dividends or make distributions on our capital stock or redeem, repurchase or retire our capital stock; make certain investments and acquisitions; create liens on our or our subsidiaries’ assets; enter into transactions with affiliates; merge or consolidate with another person or sell or otherwise dispose of substantially all of our assets; make certain payments in respect of other material indebtedness; alter the business that we conduct; and make certain capital expenditures.
Under the Credit Agreement, we are required to maintain a consolidated leverage ratio and an interest expense coverage ratio. Our ability to meet such financial ratios can be affected by events beyond our control, and we cannot assure you that we will be able to meet such ratios. The Credit Agreement also contains various covenants and restrictions and a breach of any covenant or restriction could result in a default under our Credit Agreement. If any such default occurs, the lenders may elect (after the expiration of any applicable notice or grace periods) to declare all outstanding borrowings, together with accrued and unpaid interest and other amounts payable thereunder, to be immediately due and payable. Further, following an event of default under the Credit Facility, the lenders will have the right to proceed against the collateral granted to them to secure that debt. If the debt under the Credit Facility were to be accelerated, our assets may not be sufficient to repay in full that debt that may become due as a result of that acceleration.
We rely on certain critical information systems for the operation of our business and a disruption in our information systems, including those related to cybersecurity, could adversely affect our business operations.
We maintain and rely upon certain critical information systems for the effective operation of our business. These information systems include telecommunications, the Internet, our corporate intranet, various computer hardware and software applications, network communications, and e-mail. These information systems may be owned by us or by our outsource providers or even third parties such as vendors and contractors and may be maintained by us or by such providers or third parties. These information systems are subject to attacks, failures, and access denials from a number of potential sources including viruses, destructive or inadequate code, power failures, and physical damage to computers, hard drives, communication lines and networking equipment. To the extent that these information systems are under our control, we have implemented security procedures, such as virus protection software and emergency recovery processes, to address the outlined risks; however, security procedures for information systems cannot be guaranteed to be failsafe and our inability to use or access these information systems at critical points in time could unfavorably impact the timely and efficient operation of our business. Additionally, any compromise of our information security could result in the unauthorized publication of our confidential business or proprietary information, including potential theft of our intellectual property or trade secrets (including our proprietary technology) or the unauthorized release of customer, supplier or employee data and result in a violation of privacy or other laws, thus exposing us to litigation or damage to our reputation. To the extent that our business is interrupted or data or proprietary technology is lost, destroyed or inappropriately used or disclosed, such disruption could adversely affect our competitive position, relationship with customers, suppliers or employees or our business, financial condition and operating results. In addition, we may be required to incur significant costs to protect against or repair the damage caused by these disruptions or security breaches in the future.
The costs associated with our indemnification of certain customers, distributors, and other parties could be higher in future periods.
In the normal course of our business, we indemnify other parties, including customers, distributors, and lessors, with respect to certain matters. These obligations typically arise pursuant to contracts under which we agree to hold the other party harmless against losses arising from a breach of representations and covenants related to certain matters, such as acts or omissions of our employees, infringement of third-party intellectual property rights, and certain environmental matters. We have not incurred any significant expense as a result of agreements of this type in at least a decade, but there can be no assurances that we will not incur expense under these indemnification provisions in the future.
We have also entered into agreements with our current and former directors and certain of our current and former executives indemnifying them against certain liabilities incurred in connection with their duties. Our Certificate of Incorporation and Bylaws contain similar indemnification obligations with respect to our current and former directors and employees, as does the California Labor Code. We cannot estimate the amount of potential future payments, if any, that we might be required to make as a result of these agreements.
Item 1B. Unresolved Staff Comments
None.