UNITED STATES SECURITIES AND EXCHANGE COMMISSION
WASHINGTON, D.C. 20549

FORM 10-Q

þ
QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the quarterly period ended June 25, 2017

o
TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
For the transition period from ____________ to ____________.                                    

Commission file number: 1-6615

SUPERIOR INDUSTRIES INTERNATIONAL, INC.
(Exact Name of Registrant as Specified in Its Charter)

Delaware
 
95-2594729
(State or Other Jurisdiction of  Incorporation or Organization)
 
(I.R.S. Employer Identification No.)
 
 
 
26600 Telegraph Road, Suite 400
 
 
Southfield, Michigan
 
48033
(Address of Principal Executive Offices)
 
(Zip Code)
Registrant’s Telephone Number, Including Area Code: (248) 352-7300

Indicate by check mark whether the registrant: (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.
Yes   þ     No   o

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).
Yes   þ     No   o

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company” and "emerging growth company" in Rule 12b-2 of the Exchange Act.

Large Accelerated Filer  o       Accelerated Filer  þ       Non-Accelerated Filer  o       Smaller Reporting Company  o
Emerging Growth Company  o      

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. o

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).
Yes   o     No   þ

Number of shares of common stock outstanding as of July 31, 2017: 24,904,545






TABLE OF CONTENTS
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Page
PART I
-
FINANCIAL INFORMATION
 
 
 
 
 
 
 
 
 
 
 
Item 1
-
 
 
 
 
 
 
 
 
 
 
 
 
 
Condensed Consolidated Statements of Operations
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Item 2
-
 
 
 
 
 
 
 
 
 
 
Item 3
-
 
 
 
 
 
 
 
 
 
 
Item 4
-
 
 
 
 
 
 
 
 
PART II
-
OTHER INFORMATION
 
 
 
 
 
 
 
 
 
 
 
Item 1
-
 
 
 
 
 
 
 
 
 
 
Item 1A
-
 
 
 
 
 
 
 
 
 
 
Item 2
-
 
 
 
 
 
 
 
 
 
 
Item 6
-
 
 
 
 
 
 
 
 
 
 
 


Table of Contents

PART I
FINANCIAL INFORMATION

Item 1. Financial Statements

Superior Industries International, Inc.
Condensed Consolidated Statements of Operations
(Dollars in thousands, except per share data)
(Unaudited)
 
 
 
Thirteen Weeks Ended
 
Twenty-six Weeks Ended
 
 
June 25,
2017
 
June 26,
2016
 
June 25,
2017
 
June 26,
2016
NET SALES
 
$
240,628

 
$
182,709

 
$
414,848

 
$
368,774

Cost of sales:
 
 
 
 
 


 
 
Cost of sales
 
220,601

 
153,012

 
375,409

 
311,332

Restructuring costs (Note 4)
 
(78
)
 
157

 
130

 
187

 
 
220,523

 
153,169

 
375,539

 
311,519

GROSS PROFIT
 
20,105

 
29,540

 
39,309

 
57,255

Selling, general and administrative expenses
 
22,103

 
10,000

 
37,363

 
18,993

INCOME (LOSS) FROM OPERATIONS
 
(1,998
)
 
19,540

 
1,946

 
38,262

Interest (expense) income, net
 
(14,729
)
 
79

 
(15,025
)
 
111

Other income (expense), net
 
7,486

 
(372
)
 
7,138

 
(105
)
CONSOLIDATED (LOSS) INCOME BEFORE INCOME TAXES
 
(9,241
)
 
19,247

 
(5,941
)
 
38,268

Income tax benefit (provision)
 
1,722

 
(6,082
)
 
1,524

 
(10,640
)
CONSOLIDATED NET (LOSS) INCOME
 
(7,519
)
 
13,165

 
(4,417
)
 
27,628

Less: Net loss attributable to non-controlling interest
 
247

 

 
247

 

NET (LOSS) INCOME ATTRIBUTABLE TO SUPERIOR
 
$
(7,272
)
 
$
13,165

 
$
(4,170
)
 
$
27,628

(LOSS) EARNINGS PER SHARE ATTRIBUTABLE TO SUPERIOR- BASIC
 
$
(0.41
)
 
$
0.52

 
$
(0.28
)
 
$
1.08

(LOSS) EARNINGS PER SHARE ATTRIBUTABLE TO SUPERIOR- DILUTED
 
$
(0.41
)
 
$
0.52

 
$
(0.28
)
 
$
1.08

DIVIDENDS DECLARED PER SHARE
 
$
0.09

 
$
0.18

 
$
0.27

 
$
0.36



The accompanying unaudited notes are an integral part of these condensed consolidated financial statements.

1

Table of Contents

Superior Industries International, Inc.
Condensed Consolidated Statements of Comprehensive Income
(Dollars in thousands)
(Unaudited)

 
Thirteen Weeks Ended
 
Twenty-six Weeks Ended
 
June 25, 2017
 
June 26, 2016
 
June 25, 2017
 
June 26, 2016
 
 
 
 
 
 
 
 
Net (loss) income attributable to Superior
$
(7,272
)
 
$
13,165

 
$
(4,170
)
 
$
27,628

Other comprehensive income (loss), net of tax:
 
 
 
 
 
 
 
Foreign currency translation gain (loss), net of tax
14,295

 
(6,821
)
 
23,345

 
(8,666
)
Change in unrecognized gains (losses) on derivative instruments:
 
 
 
 
 
 
 
  Change in fair value of derivatives
10,568

 
(6,734
)
 
27,962

 
(5,416
)
Tax provision

 

 
(335
)
 
(266
)
Change in unrecognized gains (losses) on derivative instruments, net of tax
10,568

 
(6,734
)
 
27,627

 
(5,682
)
Defined benefit pension plan:
 
 

 
 
 
 
Actuarial gains on pension obligation, net of curtailments and amortization
93

 
84

 
185

 
168

Tax provision
(25
)
 
(30
)
 
(49
)
 
(62
)
Pension changes, net of tax
68

 
54

 
136

 
106

Other comprehensive income (loss), net of tax
24,931

 
(13,501
)
 
51,108

 
(14,242
)
Comprehensive income (loss) attributable to Superior
$
17,659

 
$
(336
)
 
$
46,938

 
$
13,386


The accompanying unaudited notes are an integral part of these condensed consolidated financial statements.


2

Table of Contents

Superior Industries International, Inc.
Condensed Consolidated Balance Sheets
(Dollars in thousands)
(Unaudited)
 
 
June 25, 2017
 
December 31, 2016
ASSETS
 
 
 
Current assets:
 
 
 
Cash and cash equivalents
$
58,732

 
$
57,786

Short-term investments
750

 
750

Restricted cash
62,488

 

Accounts receivable, net
179,127

 
99,331

Inventories
172,623

 
82,837

Income taxes receivable
6,353

 
3,682

Other current assets
28,551

 
9,695

Total current assets
508,624

 
254,081

Property, plant and equipment, net
501,607

 
227,403

Investment in unconsolidated affiliate
2,000

 
2,000

Goodwill
310,728

 

Intangibles, net
212,961

 

Non-current deferred income tax assets, net
53,397

 
28,838

Other non-current assets
37,013

 
30,434

Total assets
$
1,626,330

 
$
542,756

 
 
 
 
LIABILITIES, MEZZANINE EQUITY AND SHAREHOLDERS' EQUITY
 

 
 

Current liabilities:
 

 
 

Accounts payable
$
96,809

 
$
37,856

Accrued expenses
64,470

 
46,315

Current portion of long-term debt
18,800

 

Income taxes payable
1,504

 
1,793

Total current liabilities
181,583

 
85,964

Long-term debt (less current portion)
721,056

 

Non-current income tax liabilities
5,816

 
5,301

Non-current deferred income tax liabilities, net
33,225

 
3,628

Other non-current liabilities
43,323

 
49,637

Commitments and contingencies (Note 18)

 

 
 
 
 
Mezzanine equity:
 
 
 
Redeemable preferred shares, $0.01 par value, 1,000,000 shares authorized, 150,000 shares outstanding at June 25, 2017
147,492

 

 
 
 
 
Shareholders' equity:
 

 
 

Common stock, $0.01 par value
 

 
 

Authorized - 100,000,000 shares; Issued and outstanding - 24,906,000 shares
 

 
 

(25,143,950 shares at December 25, 2016)
88,669

 
89,916

Accumulated other comprehensive loss
(73,817
)
 
(124,925
)
Retained earnings
415,086

 
433,235

Superior shareholders' equity
429,938

 
398,226

Noncontrolling interests
63,897

 

Total shareholders' equity
493,835

 
398,226

Total liabilities, mezzanine and shareholders' equity
$
1,626,330

 
$
542,756


The accompanying unaudited notes are an integral part of these condensed consolidated financial statements.

3


Superior Industries International, Inc.
Condensed Consolidated Statements of Cash Flows
(Dollars in thousands)
(Unaudited)
 
 
Twenty-six Weeks Ended
 
June 25, 2017
 
June 26, 2016
NET CASH (USED IN) PROVIDED BY OPERATING ACTIVITIES
$
(10,093
)
 
$
24,522

 
 
 
 
CASH FLOWS FROM INVESTING ACTIVITIES:
 

 
 

Additions to property, plant and equipment
(29,982
)
 
(17,692
)
Acquisition of Uniwheels, net of cash acquired
(690,704
)
 

Proceeds from sales and maturities of investments

 
200

Proceeds from sale of property, plant and equipment
2

 
1

NET CASH USED IN INVESTING ACTIVITIES
(720,684
)
 
(17,491
)
 
 
 
 
CASH FLOWS FROM FINANCING ACTIVITIES:
 

 
 

Proceeds from issuance of long-term debt
975,571

 

Proceeds from issuance of redeemable preferred shares
150,000

 

Debt repayment
(282,322
)
 

Cash dividends paid
(8,985
)
 
(9,232
)
Cash paid for common stock repurchase
(5,014
)
 
(13,098
)
Payments related to tax withholdings for stock-based compensation
(1,457
)
 

Proceeds from exercise of stock options

 
898

Excess tax benefits from exercise of stock options

 

Redeemable preferred shares issuance costs
(3,737
)
 

Financing costs paid
(30,460
)
 

NET CASH PROVIDED BY (USED IN) FINANCING ACTIVITIES
793,596

 
(21,432
)
 
 
 
 
Effect of exchange rate changes on cash
615

 
(160
)
 
 
 
 
Net increase (decrease) in cash and cash equivalents
63,434

 
(14,561
)
 
 
 
 
Cash and cash equivalents and restricted cash at the beginning of the period
57,786

 
52,036

 
 
 
 
Cash and cash equivalents and restricted cash at the end of the period
$
121,220

 
$
37,475



The accompanying unaudited notes are an integral part of these condensed consolidated financial statements.



4


Superior Industries International, Inc.
Condensed Consolidated Statement of Shareholders’ Equity
(Dollars in thousands)
(Unaudited)



 
Common Stock
 
Accumulated Other Comprehensive (Loss) Income
 
 
 
 
 
 
 
Number of Shares
 
Amount
 
Unrecognized Gains (Losses) on Derivative Instruments
 
Pension Obligations
 
Cumulative Translation Adjustment
 
Retained Earnings
 
Non-controlling Interest
 
Total
Balance at December 31, 2016
25,143,950

 
$
89,916

 
$
(16,101
)
 
$
(3,636
)
 
$
(105,188
)
 
$
433,235

 
$

 
$
398,226

Net loss attributable to Superior
 
 
 
 
 
 
 
 
 
 
(4,170
)
 
(247
)
 
(4,417
)
Change in unrecognized gains (losses) on derivative instruments, net of tax
 
 
 
 
27,627

 

 

 

 

 
27,627

Change in employee benefit plans, net of taxes
 
 
 
 
 
 
136

 

 

 

 
136

Net foreign currency translation adjustment
 

 
 

 
 
 

 
23,345

 

 

 
23,345

Stock options exercised

 

 
 
 

 

 

 

 

Restricted stock awards granted, net of forfeitures
33,692

 

 
 
 

 

 

 

 

Stock-based compensation expense
(55,801
)
 
(470
)
 
 
 

 

 

 

 
(470
)
Common stock repurchased
(215,841
)
 
(777
)
 
 
 

 

 
(4,237
)
 

 
(5,014
)
Cash dividends declared ($0.27 per share)

 

 
 
 

 

 
(6,860
)
 

 
(6,860
)
Redeemable preferred dividend
 
 
 
 
 
 
 
 
 
 
(2,882
)
 
 
 
(2,882
)
Non-controlling interest
 
 
 
 
 
 
 
 
 
 
 
 
64,144

 
64,144

Balance at June 25, 2017
24,906,000

 
$
88,669

 
$
11,526

 
$
(3,500
)
 
$
(81,843
)
 
$
415,086

 
$
63,897

 
$
493,835


The accompanying unaudited notes are an integral part of these condensed consolidated financial statements.


5


Superior Industries International, Inc.
Notes to Condensed Consolidated Financial Statements
June 25, 2017
(Unaudited)


Note 1 – Nature of Operations

Headquartered in Southfield, Michigan, the principal business of Superior Industries International, Inc. (referred to herein as the “company” or “we,” “us” and “our”) is the design and manufacture of aluminum wheels for sale to original equipment manufacturers ("OEMs"). We are one of the largest suppliers of cast aluminum wheels to the world’s leading automobile and light truck manufacturers, with manufacturing operations in North America and Europe.  Customers in North America and Europe represent the principal market for our products.

Ford Motor Company ("Ford"), General Motors Company ("GM") and Toyota Motor Company ("Toyota") were our customers individually accounting for more than 10 percent of our consolidated sales in the first half of 2017 and together represented approximately 69 percent of our trade sales during the first half of 2017 . Additionally, Nissan Motor Co., Ltd. ("Nissan") and Fiat Chrysler Automotive N.V. ("FCA") individually accounted for 7 percent and 5 percent , respectively of our consolidated sales during the first half of 2017 and together with Ford, GM and Toyota represented approximately 81 percent of our trade sales during the first half of 2017 . We also manufacture aluminum wheels for BMW, Mazda, Subaru, Tesla and Volkswagen.  The loss of all or a substantial portion of our sales to Ford, GM or Toyota would have a significant adverse impact on our operating results and financial condition. This risk is partially mitigated by our long-term relationships with these OEM customers and our supply arrangements, which are generally for multi-year periods. Additionally, the acquisition of Uniwheels AG ("Uniwheels") on May 30, 2017 diversifies our OEM customer base to include Audi AG ("Audi"), Mercedes-Benz, and other European customers and also provides new aftermarket customers.

Demand for automobiles and light trucks (including SUVs and crossover vehicles) in the North American and European markets is subject to many unpredictable factors such as changes in the general economy, gasoline prices, consumer credit availability and interest rates.  Demand for aluminum wheels can be further affected by other factors, including pricing and performance compared to competitive materials such as steel.  Additionally, the demand for our products is influenced by shifts of market share between vehicle manufacturers and the specific market penetration of individual vehicle platforms being sold by our customers.
 
We have had long-term relationships with our customers and our supply arrangements generally are for multi-year periods however, maintaining such long-term arrangements on terms acceptable to us remains challenging due to global competitive pricing pressures. The raw materials used in producing our products are readily available and are obtained through suppliers with whom we have, in many cases, relatively long-standing trade relations.


Note 2 – Presentation of Condensed Consolidated Financial Statements

During interim periods, we follow the accounting policies set forth in our Annual Report on Form 10-K for the fiscal year ended December 25, 2016 (the "2016 Annual Report on Form 10-K") and apply appropriate interim financial reporting standards for a fair statement of our operating results and financial position in conformity with accounting principles generally accepted in the United States of America, as codified by the Financial Accounting Standards Board ("FASB") in the Accounting Standards Codification ("ASC") (referred to herein as "U.S. GAAP"), as indicated below.  For convenience of presentation, the 2016 fiscal year is referred to as December 31, but actually reflects our financial position and results of operations for the period described below. Users of financial information produced for interim periods in 2017 are encouraged to read this Quarterly Report on Form 10-Q in conjunction with our consolidated financial statements and notes thereto filed with the Securities and Exchange Commission ("SEC") in our 2016 Annual Report on Form 10-K.

Interim financial reporting standards require us to make estimates that are based on assumptions regarding the outcome of future events and circumstances not known at that time, including the use of estimated effective tax rates.  Inevitably, some assumptions will not materialize, unanticipated events or circumstances may occur which vary from those estimates and such variations may significantly affect our future results. Additionally, interim results may not be indicative of our results for future interim periods or our annual results.

We use a 4-4-5 convention for our fiscal quarters, which are thirteen week periods generally ending on the last Sunday of each calendar quarter.  We refer to these thirteen week fiscal periods as “quarters” throughout this report.  Uniwheels uses a regular calendar close with months ending on the last day of the month. Therefore, during the second and third quarters there will be a

6


slight difference in timing of close, but the year ends will align on December 31, 2017. Thereafter, we will go to a consolidated close with each month ending on the last day of the month. The slight difference in timing is not considered to be significant to the consolidated financial statements. The accompanying unaudited condensed consolidated financial statements have been prepared in accordance with the SEC’s requirements for quarterly reports on Form 10-Q and U.S. GAAP and, in our opinion, contain all adjustments, of a normal and recurring nature, which are necessary for a fair statement of (i) the condensed consolidated statements of operations for the thirteen and twenty-six week period ended June 25, 2017 , (ii) the condensed consolidated statements of comprehensive income for the thirteen and twenty-six week period ended June 25, 2017 , (iii) the condensed consolidated balance sheets at June 25, 2017 and December 31, 2016 , (iv) the condensed consolidated statements of cash flows for the twenty-six week period ended June 25, 2017 , and (v) the condensed consolidated statement of shareholders’ equity for the twenty-six week period ended June 25, 2017 . However, the accompanying unaudited condensed consolidated financial statements do not include all information and notes required by U.S. GAAP. The condensed consolidated balance sheet as of December 31, 2016 , included in this report, was derived from our 2016 audited financial statements but does not include all disclosures required by U.S. GAAP.  

New Accounting Pronouncements

In May 2014, the FASB issued Accounting Standards Update ("ASU") “Revenue from Contracts with Customers.” This update outlines a single, comprehensive model for accounting for revenue from contracts with customers. We plan to adopt this update on January 1, 2018. The guidance permits two methods of adoption: retrospectively to each prior reporting period presented (full retrospective method), or retrospectively with the cumulative effect of initially applying the guidance recognized at the date of initial application (modified retrospective method). We anticipate adopting the standard using the modified retrospective method. There may be differences in timing of revenue recognition under the new standard compared to recognition under ASC 605 - Revenue Recognition.

In July 2015, the FASB issued an ASU entitled “Simplifying the Measurement of Inventory.” The ASU replaces the current lower of cost or market test with a lower of cost or net realizable value test when cost is determined on a first-in, first-out or average cost basis. The standard is effective for public entities for annual reporting periods beginning after December 15, 2016 and interim periods therein. It was applied prospectively in the first quarter of 2017 and the adoption of this ASU had no impact on our financial position and statement of operations.

In February of 2016, the FASB issued ASU 2016-02, Leases (Topic 842) ("ASU 2016-02"). ASU 2016-02 requires an entity to recognize right-of-use assets and lease liabilities on its balance sheet and disclose key information about leasing arrangements. ASU 2016-02 offers specific accounting guidance for a lessee, a lessor and sale and leaseback transactions. Lessees and lessors are required to disclose qualitative and quantitative information about leasing arrangements to enable a user of the financial statements to assess the amount, timing and uncertainty of cash flows arising from leases. For public companies, ASU 2016-02 is effective for annual reporting periods beginning after December 15, 2018, including interim periods within that reporting period, and requires a modified retrospective adoption, with early adoption permitted. We are evaluating the impact this guidance will have on our financial position and statement of operations.

In March 2016, the FASB issued an ASU entitled "Stock Compensation (Topic 718): Improvements to Employee Share-Based Payment Accounting." The objective of the ASU is to simplify several aspects of the accounting for employee share-based payment transactions, including the income tax consequences, classification of awards as either equity or liabilities and classification on the statement of cash flows. This ASU is effective for fiscal years beginning after December 15, 2016, including interim periods within those fiscal years. The adoption of this ASU in the first quarter of 2017 had no significant impact on our financial position and statement of operations. Also, certain disclosures in the statement of cash flows were modified in accordance with this ASU.

In August 2016, the FASB issued an ASU entitled "Statement of Cash Flows (Topic 740): Classification of Certain Cash Receipts and Cash Payments." The objective of the ASU is to address the diversity in practice in the presentation of certain cash receipts and cash payments in the statement of cash flows. This ASU is effective for fiscal years beginning after December 15, 2017, including interim periods within those fiscal years. Early adoption is permitted. We are evaluating the impact this guidance will have on our statement of cash flows.

In October 2016, the FASB issued an ASU entitled "Income Taxes (Topic 230): Intra-Entity Transfers of Assets Other than Inventory." The objective of the ASU is to improve the accounting for the income tax consequences of intra-entity transfers of assets other than inventory. This ASU is effective for fiscal years beginning after December 15, 2017, including interim periods within those fiscal years. Early adoption is permitted. We are evaluating the impact this guidance will have on our financial position and statement of operations.

In November 2016, the FASB issued an ASU entitled "Statement of Cash Flows (Topic 230): Restricted Cash." The objective of the ASU is to address the diversity in practice that exists in the classification and presentation of changes in restricted cash on the

7


statement of cash flows. This ASU is effective for fiscal years beginning after December 15, 2017, including interim periods within those fiscal years. Early adoption is permitted. We are evaluating the impact this guidance will have on our statement of cash flows.

In January 2017, the FASB issued an ASU entitled "Intangibles - Goodwill and Other (Topic 350): Simplifying the Test for Goodwill Impairment." The objective of the ASU is to simplify how an entity is required to test goodwill for impairment by eliminating Step 2 from the goodwill impairment test. Step 2 measures a goodwill impairment loss by comparing the implied fair value of a reporting unit’s goodwill with the carrying amount of that goodwill. This ASU is effective for fiscal years beginning after December 15, 2019, including interim periods within those fiscal years. Early adoption is permitted. We are evaluating the impact this guidance will have on our financial position and statement of operations.

In January 2017, the FASB issued an ASU entitled "Business Combinations (Topic 805): Clarifying the Definition of a Business." The objective of the ASU is to add guidance to assist entities with evaluating whether transactions should be accounted for as acquisitions (or disposals) of assets or businesses. This ASU is effective for fiscal years beginning after December 15, 2017, including interim periods within those fiscal years. Early adoption is permitted. We are evaluating the impact this guidance will have on our financial position and statement of operations.

In March 2017, the FASB issued an ASU entitled "Compensation-Retirement Benefits (Topic 715): Improving the Presentation of Net Periodic Pension Cost and Net Periodic Postretirement Benefit Cost." The objective of the ASU is to improve the reporting of net benefit cost in the financial statements. This ASU is effective for fiscal years beginning after December 15, 2017, including interim periods within those fiscal years. Early adoption is permitted. We are evaluating the impact this guidance will have on our financial position and statement of operations.


Note 3 – Acquisition

On March 23, 2017, Superior announced that it had entered into various agreements to commence a tender offer to acquire 100% of the outstanding equity interests of Uniwheels (the "Acquisition") through a newly-formed, wholly-owned subsidiary (the “Acquisition Sub”). The Acquisition was effected through a multi-step process as more fully described below.

In the first step of the Acquisition, on March 23, 2017, Superior obtained a commitment from the owner of approximately 61 percent of the outstanding stock of Uniwheels, Uniwheels Holding (Malta) Ltd. (the “Significant Holder”), evidenced by an irrevocable undertaking agreement (the “Undertaking Agreement”) to tender such stock in the second step of the Acquisition. In connection with the Undertaking Agreement, on March 23, 2017: (i) Superior entered into a business combination agreement with Uniwheels pursuant to which, subject to the provisions of the German Stock Corporation Act, Uniwheels and its subsidiaries undertook to, among other things, cooperate with the financing of the Acquisition; and (ii) Superior and the Significant Holder entered into a guarantee and indemnification agreement pursuant to which Superior will hold the Significant Holder harmless for claims that may arise relating to its involvement with Uniwheels. As Uniwheels is a company listed on the Warsaw Stock Exchange, the Acquisition was required to be carried out in accordance with the Polish Act of 29 July 2005 on Public Offerings and the Conditions for Introducing Financial Instruments to Organized Trading and Public Companies (the “Public Offering Act”).

Following the publication of a formal tender offer document by Superior, as required by the Public Offering Act, Superior commenced the acceptance period for the tender offer (the “Tender Offer”) on April 12, 2017, pursuant to which, Superior offered to purchase all (but not less than 75 percent of) the outstanding stock of Uniwheels and, upon the consummation of the Tender Offer, agreed to purchase the stock of the Significant Holder along with all other stock of Uniwheels tendered pursuant to the Tender Offer. On May 30, 2017, Superior acquired 92.3 percent of the outstanding stock of Uniwheels for approximately $703.0 million (based on an exchange rate of 1.00 Dollar = 3.74193 Polish Zloty). We refer to this acquisition as the “First Step Acquisition.”

Under the terms of the Tender Offer:

• the Significant Holder received cash consideration of Polish Zloty 226.5 per share; and

• Uniwheels’ other shareholders received cash consideration of Polish Zloty 247.87 per share, equivalent to the volume weighted-average-price of Uniwheels’ shares for the three months prior to commencement of the Tender Offer, plus 5.0 percent .

On June 30, 2017, the company announced that it had commenced the delisting and associated tender process for the remaining outstanding shares of Uniwheels. As of July 31, 2017, 109,959 additional shares were tendered. Following or simultaneously with the approval of the delisting by the Polish regulator, Superior anticipates (i) consummating an upstream merger of Uniwheels into Acquisition Sub pursuant to which fair cash compensation will be paid to Uniwheels’ minority stockholders and (ii) entering

8


into a Domination and Profit Loss Transfer Agreement (“DPLTA”). Superior anticipates that the process of acquiring the remaining 7.7 percent of Uniwheels’ outstanding shares will take approximately eight to ten months . We refer to this acquisition as the “Second Step Acquisition.” The aggregate equity purchase price of the Acquisition (assuming the remaining 7.7 percent of Uniwheels’ stock is acquired for cash consideration of Polish Zloty 247.87 per share (the price paid to Uniwheels’ shareholders in the Tender Offer) and an exchange rate of 1.00 Dollar = 3.74193 Polish Zloty) will be approximately $778.0 million . We entered into foreign currency hedges prior to the closing of the First Step Acquisition intended to reduce currency risk associated with the settlement of the Tender Offer (the “Hedging Transactions”). The net benefit of such Hedging Transactions to Superior reduced the total anticipated purchase price of the Acquisition to $766.2 million .

The company’s condensed consolidated financial statements for the thirteen and twenty-six week periods ended June 25, 2017 and June 26, 2016 include Uniwheels results of operations from May 30, 2017 through June 30, 2017 (please see Note 7, "Business Segments" for the geographic segment results included within the condensed consolidated financial statements for the thirteen and twenty-six week periods ended June 25, 2017 and June 26, 2016, which include Uniwheels results of operations from May 30, 2017 through June 30, 2017). The company’s condensed consolidated financial statements reflect the purchase accounting adjustments in accordance with ASC 805 “Business Combinations”, whereby the purchase price was allocated to the assets acquired and liabilities assumed based upon their estimated fair values on the acquisition date.

During the second quarter of 2017, the company determined a preliminary valuation of the identifiable assets acquired and the liabilities assumed. The following is the allocation of the purchase price:

(Dollars in thousands)
 
 
 
Estimated purchase price
 
 
 
   Cash consideration
 
 
$
703,000

 
 
 
 
Non-controlling interest
 
 
63,200

 
 
 
 
Preliminary purchase price allocation
 
 
 
   Cash and cash equivalents
 
 
12,296

   Accounts receivable
 
 
60,580

   Inventories
 
 
82,402

   Prepaid expenses and other current assets
 
 
11,479

      Total current assets
 
 
166,757

   Property and equipment
 
 
250,000

   Intangible assets (1)
 
 
212,000

   Goodwill
 
 
306,154

   Other assets
 
 
20,937

      Total assets acquired
 
 
955,848

   Accounts payable
 
 
61,883

   Other current liabilities
 
 
40,361

      Total current liabilities
 
 
102,244

   Other long-term liabilities
 
 
87,404

      Total liabilities assumed
 
 
189,648

   Net assets acquired
 
 
$
766,200


(1)    Intangible assets are recorded at estimated fair value, as determined by management based on available information which includes a preliminary valuation prepared by an independent third party. The fair values assigned to identifiable intangible assets were determined through the use of the income approach, specifically the relief from royalty and multi-period excess earnings methods. The major assumptions used in arriving at the estimated identifiable intangible asset values included management’s estimates of future cash flows, discounted at an appropriate rate of return which are based on the weighted average cost of capital for both the company and other market participants. The useful lives for intangible assets were determined based upon the remaining useful economic lives of the intangible assets that are expected to

9


contribute directly or indirectly to future cash flows. The estimated fair value of intangible assets and related useful lives as included in the preliminary purchase price allocation include:

 
 
Estimated Fair Value
 
Estimated Useful Life (in Years)
(Dollars in thousands)
 
 
 
 
Brand name
 
$
9,000

 
5-6
Technology
 
16,000

 
4-6
Customer relationships
 
167,000

 
6-11
Trade names
 
20,000

 
Indefinite
 
 
$
212,000

 
 

The above goodwill represents future economic benefits expected to be recognized from the company’s expansion into the European wheel market, as well as expected future synergies and operating efficiencies from combining operations with Uniwheels. Goodwill resulting from the Acquisition of $306.2 million has been allocated to the European segment.

The unaudited combined pro forma information is for informational purposes only. The pro forma information is not necessarily indicative of what the combined company’s results actually would have been had the Acquisition been completed as of the beginning of the periods as indicated. In addition, the unaudited pro forma information does not purport to project the future results of the combined company.
 
 
Thirteen Weeks Ended
 
Twenty-six Weeks Ended
 
 
June 25, 2017
 
June 26, 2016
 
June 25, 2017
 
June 26, 2016
 
 
Proforma
 
Proforma
 
Proforma
 
Proforma
(Dollars in thousands)
 
 
 
 
 
 
 
 
Net sales as reported
 
$
240,628

 
$
182,709

 
$
414,848

 
$
368,774

Uniwheels sales, prior to the Acquisition
 
103,751

 
128,655

 
243,744

 
248,946

Proforma combined sales
 
$
344,379

 
$
311,364

 
$
658,592

 
$
617,720

 
 
 
 
 
 
 
 
 
Net (loss) income as reported
 
$
(7,519
)
 
$
13,165

 
$
(4,417
)
 
$
27,628

Uniwheels net income before income taxes, prior to the Acquisition
 
8,465

 
16,445

 
25,394

 
28,197

Incremental interest expense on the debt
 
(7,081
)
 
(10,622
)
 
(17,776
)
 
(21,332
)
Incremental amortization on the identifiable intangible assets
 
(4,388
)
 
(6,582
)
 
(10,970
)
 
(13,164
)
Transaction expenses incurred by both the company and Uniwheels
 
12,722

 

 
19,684

 

Income tax expense related to the proforma adjustments
 
875

 
1,675

 
33

 
4,411

Proforma net income
 
$
3,074

 
$
14,081

 
$
11,948

 
$
25,740


Restricted Cash

Restricted cash disclosed on the condensed consolidated balance sheet relates to funds held for the purpose of acquiring the remaining 7.7% of Uniwheels’ outstanding shares, which will take approximately eight to ten months, and to pay down assumed debt related to our European operations.



10


Note 4 – Restructuring

During 2014, we completed a review of initiatives to reduce costs and enhance our competitive position. Based on this review, we committed to a plan to close operations at our Rogers, Arkansas facility, which was completed during the fourth quarter of 2014. The action was undertaken in order to reduce costs and enhance our global competitive position. D uring the fourth quarter of 2016, we sold the Rogers facility for total proceeds of $4.3 million , resulting in a $1.4 million gain on sale, which is recorded as a reduction to selling, general and administrative expense in the consolidated income statements.

The total cost incurred as a result of the Rogers facility closure was $16.0 million , of which $0.1 million and $0.2 million was recognized as of June 25, 2017 and June 26, 2016 , respectively. The following table summarizes the Rogers, Arkansas plant closure costs and classification in the consolidated income statement for the period ended June 25, 2017 :
(Dollars in thousands)
Costs Incurred Through December 31, 2016
 
Costs Incurred During the Twenty-six Week Period Ended June 25, 2017
 
Total Costs
 
Classification
Accelerated and other depreciation of assets idled
$
7,254

 
$
13

 
$
7,267

 
Cost of sales, Restructuring costs
Severance costs
2,011

 

 
2,011

 
Cost of sales, Restructuring costs
Equipment removal and impairment, inventory written-down, lease termination and other costs
6,634

 
117

 
6,751

 
Cost of sales, Restructuring costs
 
15,899

 
130

 
16,029

 
 
Gain on sale of the facility
(1,436
)
 

 
(1,436
)
 
 
Total
$
14,463

 
$
130

 
$
14,593

 
 


Note 5 – Fair Value Measurements

The company applies fair value accounting for all financial assets and liabilities and non-financial assets and liabilities that are recognized or disclosed at fair value in the financial statements on a recurring basis, while other assets and liabilities are measured at fair value on a nonrecurring basis, such as when we have an asset impairment. Fair value is estimated by applying the following hierarchy, which prioritizes the inputs used to measure fair value into three levels and bases the categorization within the hierarchy upon the lowest level of input that is available and significant to the fair value measurement:

Level 1 – Quoted prices in active markets for identical assets or liabilities.
Level 2 – Observable inputs other than quoted prices in active markets for identical assets and liabilities, quoted prices for identical or similar assets or liabilities in inactive markets, or other inputs that are observable or can be corroborated by observable market data for substantially the full term of the assets or liabilities.
Level 3 – Inputs that are generally unobservable and typically reflect management’s estimate of assumptions that market participants would use in pricing the asset or liability.
The carrying amounts for cash and cash equivalents, investments in certificates of deposit, accounts receivable, accounts payable and accrued expenses approximate their fair values due to the short period of time until maturity.

Cash and Cash Equivalents

Included in cash and cash equivalents are highly liquid investments that are readily convertible to known amounts of cash, and which are subject to an insignificant risk of change in value due to interest rate, quoted price or penalty on withdrawal. A debt security is classified as a cash equivalent if it meets these criteria and if it has a remaining time to maturity of three months or less from the date of acquisition. Amounts on deposit and available upon demand, or negotiated to provide for daily liquidity without penalty, are classified as cash and cash equivalents. Time deposits, certificates of deposit and money market accounts that meet the above criteria are reported at par value on our balance sheet and are excluded from the table below.


11


Derivative Financial Instruments

Our derivatives are over-the-counter customized derivative transactions and are not exchange traded. We estimate the fair value of these instruments using industry-standard valuation models such as a discounted cash flow. These models project future cash flows and discount the future amounts to a present value using market-based expectations for interest rates, foreign exchange rates, commodity prices and the contractual terms of the derivative instruments. The discount rate used is the relevant interbank deposit rate (e.g., LIBOR) plus an adjustment for non-performance risk. In certain cases, market data may not be available, and we may use broker quotes and models (e.g., Black-Scholes) to determine fair value. This includes situations where there is lack of liquidity for a particular currency or commodity or when the instrument is longer dated.

Cash Surrender Value
 
The cash surrender value of the life insurance policies is the sum of money the insurance company will pay to the company in the event the policy is voluntarily terminated before its maturity or the insured event occurs. Over the term of the life insurance contracts, the cash surrender value changes as a result of premium payments and investment income offset by investment losses, charges and miscellaneous fees. The amount of the asset recorded for the investment in the life insurance contracts is equal to the cash surrender value which is the amount that will be realized under the contract as of the balance sheet date if the insured event occurs.

The following table categorizes items measured at fair value at June 25, 2017 :

 
 
 
Fair Value Measurement at Reporting Date Using
 
 
 
Quoted Prices
 
Significant Other
 
Significant
 
 
 
in Active Markets
 
Observable
 
Unobservable
 
 
 
for Identical Assets
 
Inputs
 
Inputs
June 25, 2017
Total
 
(Level 1)
 
(Level 2)
 
(Level 3)
(Dollars in thousands)
 
 
 
 
 
 
 
Assets
 
 
 
 
 
 
 
Certificates of deposit
$
750

 
$

 
$
750

 
$

Cash surrender value
7,666

 

 
7,666

 

Derivative contracts
10,259

 

 
10,259

 

Total
$
18,675

 
$

 
$
18,675

 
$

 


 


 


 


Liabilities


 


 


 


Derivative contracts
$
6,629

 
$

 
$
6,629

 
$

Total
$
6,629

 
$

 
$
6,629

 
$



12


The following table categorizes items measured at fair value at December 31, 2016:

 
 
 
Fair Value Measurement at Reporting Date Using
 
 
 
Quoted Prices
 
Significant Other
 
Significant
 
 
 
in Active Markets
 
Observable
 
Unobservable
 
 
 
for Identical Assets
 
Inputs
 
Inputs
December 31, 2016
Total
 
(Level 1)
 
(Level 2)
 
(Level 3)
(Dollars in thousands)
 
 
 
 
 
 
 
Assets
 
 
 
 
 
 
 
Certificates of deposit
$
750

 
$

 
$
750

 
$

Cash surrender value
7,480

 

 
7,480

 

Derivative contracts
13

 

 
13

 

Total
$
8,243

 
$

 
$
8,243

 
$

 


 


 


 


Liabilities


 


 


 


Derivative contracts
$
24,773

 
$

 
$
24,773

 
$

Total
$
24,773

 
$

 
$
24,773

 
$



Note 6 – Financial Instruments

Debt Instruments

The carrying values of the company’s debt instruments vary from their fair values. The fair values were determined by reference to transacted prices of these securities (Level 2 input based on the GAAP fair value hierarchy). The estimated fair value, as well as the carrying value, of the company's debt instruments are shown below (in thousands ):
 
June 25, 2017
(Dollars in thousands)
 
Estimated aggregate fair value
$
762,020

Aggregate carrying value (1)
764,931

 
 
(1) Long-term debt excluding the impact of unamortized debt issuance costs.
 

Derivative Instruments and Hedging Activities

We use derivatives to partially offset our business exposure to foreign currency risk. We may enter into forward contracts, option contracts, swaps, collars or other derivative instruments to offset some of the risk on expected future cash flows and on certain existing assets and liabilities. However, we may choose not to hedge certain exposures for a variety of reasons including, but not limited to, accounting considerations and the prohibitive economic cost of hedging particular exposures. There can be no assurance the hedges will offset more than a portion of the financial impact resulting from movements in foreign currency exchange rates.

To help protect gross margins from fluctuations in foreign currency exchange rates, certain of our subsidiaries whose functional currency is the U.S. dollar hedge a portion of forecasted foreign currency costs. Generally, we may hedge portions of our forecasted foreign currency exposure associated with costs, typically for up to 42 months .

We record all derivatives in the condensed consolidated balance sheets at fair value. Our accounting treatment for these instruments is based on the hedge designation. The effective portions of cash flow hedges are recorded in Accumulated Other Comprehensive Income ("AOCI") until the hedged item is recognized in earnings. The ineffective portions of cash flow hedges are recorded in cost of sales. Derivatives that are not designated as hedging instruments are adjusted to fair value through earnings in the financial statement line item to which the derivative relates. All derivatives were designated as hedging instruments at December 31, 2016 . At June 25, 2017 , the company held derivatives that were designated as hedging instruments as well as derivatives that did not qualify for designation as hedging instruments as discussed below.

13



Deferred gains and losses associated with cash flow hedges of foreign currency costs are recognized as a component of cost of sales in the same period as the related cost is recognized. Our foreign currency transactions hedged with cash flow hedges as of June 25, 2017 , are expected to occur within 1 month to 42 months .

Derivative instruments designated as cash flow hedges must be de-designated as hedges when it is probable the forecasted hedged transaction will not occur in the initially identified time period or within a subsequent two-month time period. Deferred gains and losses in AOCI associated with such derivative instruments are reclassified immediately into other expense. Any subsequent changes in fair value of such derivative instruments are reflected in other expense unless they are re-designated as hedges of other transactions.

Currency option derivative contracts not designated as hedging instruments consist principally of option contracts to purchase Polish Zloty and the Euro related to the acquisition of Uniwheels. See Note 3, "Acquisition."

We had $1.5 million and $0.1 million in losses recognized in other expense for foreign currency forward, interest rate swap and aluminum contracts not designated as hedging instruments during the twenty-six week periods ended June 25, 2017 and June 26, 2016 , respectively.

The following tables display the fair value of derivatives by balance sheet line item at June 25, 2017 and December 31, 2016 :

 
June 25, 2017
 
Other Current Assets
 
Other Non-current Assets
 
Accrued Liabilities
 
Other Non-current Liabilities
(Dollars in thousands)
 
 
 
 
 
 
 
Foreign exchange forward contracts and collars designated as hedging instruments
$
4,596

 
$
5,125

 
$
3,032

 
$
1,938

Aluminum forward contracts not designated as hedges

79

 

 
816

 

Interest rate swap contracts not designated as hedges


 

 

 
385

Cross currency swap not designated as hedging instrument
459

 

 

 
459

Total derivative financial instruments
$
5,134

 
$
5,125

 
$
3,848

 
$
2,782


 
December 31, 2016
 
Other Current Assets
 
Other Non-current Assets
 
Accrued Liabilities
 
Other Non-current Liabilities
(Dollars in thousands)
 
 
 
 
 
 
 
Foreign exchange forward contracts and collars designated as hedging instruments
$
13

 
$

 
$
10,076

 
$
14,697

Total derivative financial instruments
$
13

 
$

 
$
10,076

 
$
14,697



14


The following table summarizes the notional amount and estimated fair value of our derivative financial instruments:
 
 
June 25, 2017
 
December 31, 2016
 
 
Notional U.S. Dollar Amount
 
Fair Value
 
Notional U.S. Dollar Amount
 
Fair Value
(Dollars in thousands)
 
 
 
 
 
 
 
 
Foreign currency forward contracts and collars designated as hedging instruments
 
$
248,431

 
$
4,751

 
$
(160,461
)
 
$
(24,760
)
Aluminum forward contracts not designated as hedges
 
(6,558
)
 
(737
)
 

 

Interest rate swap contracts not designated as hedges
 
(46,496
)
 
(385
)
 

 

Cross currency swap not designated as hedging instrument
 

 

 

 

Total derivative financial instruments
 
$
195,377

 
$
3,629

 
$
(160,461
)
 
$
(24,760
)

Notional amounts are presented on a gross basis. The notional amounts of the derivative financial instruments do not represent amounts exchanged by the parties and, therefore, are not a direct measure of our exposure to the financial risks described above. The amounts exchanged are calculated by reference to the notional amounts and by other terms of the derivatives, such as interest rates, foreign currency exchange rates or commodity volumes and prices.

The following table provides the impact of derivative instruments designated as cash flow hedges on our consolidated income statement:
Twenty-six Week Period Ended June 25, 2017
 
Amount of Gain or (Loss) Recognized in AOCI on Derivatives (Effective Portion)
 
Amount of Pre-tax Gain or (Loss) Reclassified from AOCI into Income (Effective Portion) 
 
Amount of Pre-tax Gain or (Loss) Recognized in Income on Derivatives (Ineffective Portion and Amount Excluded from Effectiveness Testing)
(Dollars in thousands)
 
 
 
 
 
 
Foreign currency forward contracts and collars
 
$
27,627

 
$
(3,582
)
 
$
(1,451
)
Total
 
$
27,627

 
$
(3,582
)
 
$
(1,451
)


Note 7 – Business Segments

Superior groups its operating segments into reportable segments in which sales and manufacturing efforts are focused. The products, manufacturing, and procurement are similar throughout the company's operations. Each operating segment has discrete financial information evaluated regularly by the company’s Chief Operating Decision Maker (“CODM”) in determining resource allocation and assessing performance. As a result of the Uniwheels acquisition, the company realigned its executive management structure which changed the information used by our CODM to assess performance and allocate resources. Due to different economic circumstances and customer base in the company’s operations and in conformity with ASC Topic 280, “Segment Reporting,” the company reports the results of its business in two reportable segments: North America and Europe.

15



Net Sales and Results of Operations by Reportable Segment
 
Thirteen Weeks Ended
 
Twenty-six Weeks Ended
 
June 25,
2017
 
June 26,
2016
 
June 25,
2017
 
June 26,
2016
(Dollars in thousands)
 
 
 
 
 
 
 
Net sales:
 
 
 
 
 
 
 
   North America
$
186,898

 
$
182,709

 
$
361,118

 
$
368,774

   Europe
53,730

 

 
53,730

 

         Consolidated net sales
$
240,628

 
$
182,709

 
$
414,848

 
$
368,774

 
 
 
 
 
 
 
 
  (Loss) Income from operations:
 
 
 
 
 
 
 
     North America
$
(1,098
)
 
$
19,540

 
$
2,846

 
$
38,262

     Europe
(900
)
 

 
(900
)
 

         Consolidated (loss) income from operations
$
(1,998
)
 
$
19,540

 
$
1,946

 
$
38,262


Total Property, Plant and Equipment by Reportable Segment
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Total property, plant and equipment, net, by reportable segment as follows:
 
 
 
 
 
 
 
June 25,
2017
 
December 31,
2016
(Dollars in thousands)
 
 
 
 
 
 
 
Property, plant and equipment, net:
 
 
 
 
 
 
 
North America
 
 
 
 
$
247,930

 
$
227,403

Europe
 
 
 
 
253,677

 

     Total assets
 
 
 
 
$
501,607

 
$
227,403



Note 8 – Short-Term Investments

The company's short-term investments include certificates of deposit and fixed deposits with original maturities of three months or less. Certificates of deposit and fixed deposits whose original maturity is greater than three months and is one year or less are classified as short-term investments and certificates of deposit and fixed deposits whose maturity is greater than one year at the balance sheet date are classified as non-current assets in our condensed consolidated balance sheets. The purchase of any certificates of deposit or fixed deposits that are classified as short-term investments or non-current assets appear in the investing section of our condensed consolidated statements of cash flows.

Restricted Deposits

We purchase certificates of deposit that mature within twelve months and are used to secure or collateralize letters of credit securing our workers’ compensation obligations.  At each of June 25, 2017 and December 31, 2016 , certificates of deposit totaling $0.8 million were restricted in use and were classified as short-term investments on our condensed consolidated balance sheets. 



16


Note 9 – Inventories
 
 
 
 
 
June 25, 2017
 
December 31, 2016
(Dollars in thousands)
 
 
 
Raw materials
$
62,168

 
$
40,255

Work in process
47,724

 
21,447

Finished goods
62,731

 
21,135

Inventories
$
172,623

 
$
82,837


Service wheel and supplies inventory included in other non-current assets in the condensed consolidated balance sheets totaled $7.7 million and $6.5 million at June 25, 2017 and December 31, 2016 , respectively. Included in raw materials were operating supplies and spare parts totaling $14.3 million and $10.3 million on June 25, 2017 and December 31, 2016 , respectively. Included within inventory is $81.7 million from European operations.

Note 10 – Property, Plant and Equipment
 
 
 
 
 
June 25, 2017
 
December 31, 2016
(Dollars in thousands)
 
 
 
Land and buildings
$
134,030

 
$
67,915

Machinery and equipment
681,324

 
485,185

Leasehold improvements and others
10,539

 
4,868

Construction in progress
46,534

 
26,301

 
872,427

 
584,269

Accumulated depreciation
(370,820
)
 
(356,866
)
Property, plant and equipment, net
$
501,607

 
$
227,403


Depreciation expense was $19.5 million and $17.3 million for the twenty-six weeks ended June 25, 2017 and June 26, 2016 , respectively. Included within property, plant and equipment is $253.7 million from European operations.


Note 11 – Preproduction Costs Related to Long-Term Supply Arrangements

We incur preproduction engineering and tooling costs related to the products produced for our customers under long-term supply agreements. We expense all preproduction engineering costs for which reimbursement is not contractually guaranteed by the customer or which are in excess of the contractually guaranteed reimbursement amount. We amortize the cost of the customer-owned tooling over the expected life of the wheel program on a straight-line basis. Also, we defer any reimbursements made to us by our customers and recognize the tooling reimbursement revenue over the same period in which the tooling is in use. Changes in the facts and circumstances of individual wheel programs may accelerate the amortization of both the cost of customer-owned tooling and the deferred tooling reimbursement revenues. Recognized tooling reimbursement revenues, which totaled $3.5 million and $3.9 million for the twenty-six weeks ended June 25, 2017 and June 26, 2016 , respectively, are included in net sales in the condensed consolidated statements of operations. The following tables summarize the unamortized customer-owned tooling costs included in our non-current assets, and the deferred tooling revenues included in accrued expenses and other non-current liabilities:

17


 
 
June 25, 2017
 
December 31, 2016
(Dollars in thousands)
 
 
 
 
Customer-Owned Tooling Costs
 
 
 
 
Preproduction costs
 
$
81,912

 
$
78,299

Accumulated amortization
 
(68,216
)
 
(65,100
)
Net preproduction costs
 
$
13,696

 
$
13,199

 
 
 
 
 
Deferred Tooling Revenues
 
 
 
 
Accrued expenses
 
$
3,316

 
$
5,419

Other non-current liabilities
 
5,341

 
2,593

Total deferred tooling revenues
 
$
8,657

 
$
8,012


Note 12 – Goodwill and Other Intangible Assets

Goodwill and indefinite-lived assets, such as certain trade names acquired in connection with the acquisition of Uniwheels on May 30, 2017, are not amortized, but are instead evaluated for impairment on an annual basis at the end of the fiscal year, or more frequently if events or circumstances indicate that impairment may be more likely. During the thirteen weeks ended June 25, 2017, no impairment charges have been taken against the company’s goodwill or indefinitely-lived intangible assets. The carrying amount of goodwill arose from the Acquisition described in Note 3, "Acquisition".
 
The company’s other intangible assets primarily consist of assets with finite lives and are amortized over their estimated useful lives. These assets are amortized on a straight-line basis over their estimated useful lives. Following is a summary of the company’s finite-lived and indefinite-lived intangible assets as of June 25, 2017. There were no such intangible assets at December 31, 2016.
 
 
Gross Carrying Amount
 
Accumulated Amortization
 
Currency Translation
 
Net
 
Remaining Weighted Average Amortization Period
(Dollars in thousands
 
 
 
 
 
 
 
 
 
 
Brand name
 
$
9,000

 
$
(150
)
 
$
132

 
$
8,982

 
5-6
Technology
 
16,000

 
(222
)
 
235

 
16,013

 
4-6
Customer relationships
 
167,000

 
(1,799
)
 
2,465

 
167,666

 
6-11
   Total finite
 
192,000

 
(2,171
)
 
2,832

 
192,661

 
 
Trade names
 
20,000

 

 
300

 
20,300

 
Indefinite
Total
 
$
212,000

 
$
(2,171
)
 
$
3,132

 
$
212,961

 
 

Amortization expense for these intangible assets was $2.2 million and $0 for the thirteen and twenty-six week periods ended June 25, 2017 and June 26, 2016, respectively. The anticipated annual amortization expense for these intangible assets is $26.3 million for 2018 to 2021 and $24.4 million for 2022.


Note 13 – Redeemable Preferred Shares

On March 22, 2017, Superior and TPG Growth III Sidewall, L.P. ("TPG") entered into an Investment Agreement pursuant to which Superior agreed to issue a number of shares of Series A Perpetual Convertible Preferred Stock and Series B Perpetual Preferred Stock to TPG for an aggregate purchase price of $150.0 million . On May 22, 2017, Superior issued 140,202 shares of Series A Perpetual Convertible Preferred Stock and 9,798 shares of Series B Perpetual Preferred Stock to TPG, both with a $1,000 stated value per share. The Series A Perpetual Convertible Preferred Stock has a stated value of $1,000 per share, par value of $0.01 per share and liquidation preference over common stock. The Series B Perpetual Preferred Stock has a stated value of $1,000 per share, par value of $0.01 per share, and liquidation preference over Superior common stock. The Series A Perpetual Convertible Preferred Stock is convertible into Superior common stock into a number of shares (determined by dividing the sum of the stated value and any accrued and unpaid dividends by the conversion price of $28.162 ). The Series B Perpetual Preferred Stock is not

18


convertible into Superior common stock until Superior’s stockholders approve the conversion of the Series B Perpetual Preferred Stock into Series A Perpetual Convertible Preferred Stock. The Series A Perpetual Convertible Preferred Stock and Series B Perpetual Preferred Stock will accrue dividends at a rate of 9 percent per annum, payable at Superior’s election either in-kind or in cash, provided that the Series B Perpetual Preferred Stock will accrue dividends at a rate of 11 percent per annum, payable at Superior’s election either in-kind or in cash, if stockholder approval is not obtained by September 19, 2017. Superior has undertaken to hold a special meeting of stockholders by that date for the purposes of approving the conversion of the Series B Preferred Stock into Series A Preferred Stock. In addition to the dividends, the Series A Perpetual Convertible Preferred Stock and Series B Perpetual Preferred Stock are entitled to participate in dividends on common stock in an amount equal to that which would have been due had the shares been converted into common stock. In addition, on May 22, 2017, Superior’s Board of Directors increased its size from eight to nine directors and appointed Ransom A. Langford, TPG’s designee, as a director.

The company may mandate conversion of the Series A Perpetual Convertible Preferred Stock if the price of the common stock exceeds $84 . TPG may redeem their shares upon the occurrence of a change in control, recapitalization, merger, sale of substantially all of the company’s assets, liquidation or delisting of the company’s common stock. At its option, TPG may redeem the shares at any time after May 23, 2024. If redeemed by Superior, the redemption value would be $262.5 million ( 1.75 times stated value) if redeemed on or before October 22, 2018. If redeemed after October 22, 2018, the redemption value would be the greater of $300 million ( 2.0 times stated value) or the product of the number of common shares into which the preferred stock could be converted ( 5.3 million shares currently) and the then current market price of the common stock.


Note 14 – Earnings Per Share

In accordance with U.S. GAAP, basic earnings per share is computed by dividing net (loss) income, less preferred dividends, for the period by the weighted average number of common shares outstanding for the period.  For purposes of calculating diluted earnings per share, net income is divided by the total of the weighted average shares outstanding plus the dilutive effect of our redeemable preferred stock, outstanding stock options and time and performance based restricted stock units under the treasury stock method, which includes consideration of stock-based compensation required by U.S. GAAP.
(Dollars and shares in thousands, except per share amounts)
Thirteen Weeks Ended
 
Twenty-six Weeks Ended
 
June 25,
2017
 
June 26,
2016
 
June 25,
2017
 
June 26,
2016
Basic Income Per Share:
 
 
 
 
 
 
 
Reported net (loss) income
$
(7,272
)
 
$
13,165

 
$
(4,170
)
 
$
27,628

Less: Redeemable preferred stock dividends
(2,882
)
 

 
(2,882
)
 

Basic numerator
$
(10,154
)
 
$
13,165

 
$
(7,052
)
 
$
27,628

Basic (loss) income per share
$
(0.41
)
 
$
0.52

 
$
(0.28
)
 
$
1.08

Weighted average shares outstanding-Basic
24,908

 
25,430

 
24,961

 
25,512

 
 
 

 
 
 
 
Diluted Income Per Share:
 
 
 
 
 
 
 
Reported net (loss) income
$
(7,272
)
 
$
13,165

 
$
(4,170
)
 
$
27,628

Less: Redeemable preferred stock dividends

(2,882
)
 

 
(2,882
)
 

Basic numerator

$
(10,154
)
 
$
13,165

 
$
(7,052
)
 
$
27,628

Diluted (loss) income per share
$
(0.41
)
 
$
0.52

 
$
(0.28
)
 
$
1.08

Weighted average shares outstanding-Basic
24,908

 
25,430

 
24,961

 
25,512

Weighted average dilutive stock options and restricted stock units

 
113

 

 
75

Weighted average shares outstanding-Diluted
24,908

 
25,543

 
24,961

 
25,587


For the first half of 2017, no options were included in the diluted earnings per share calculation because to do so would have been anti-dilutive. The performance shares discussed in Note 19, "Stock-Based Compensation" are not included in the diluted earnings per share because the performance metrics had not been met as of the period ended June 25, 2017 . The redeemable preferred

19


shares discussed in Note 13, "Redeemable Preferred Shares" are not included in the diluted earnings per share because the conversion would be anti-dilutive as of the period ended June 25, 2017 .


Note 15 – Income Taxes

The estimated annual effective tax rate is forecasted quarterly using actual historical information and forward-looking estimates and applied to year-to-date ordinary income (loss). The tax effects of unusual or infrequently occurring items, including changes in judgment about valuation allowances, settlements with taxing authorities and effects of changes in tax laws or rates, are reported in the interim period in which they occur.

The income tax benefit for the twenty-six weeks ended June 25, 2017 , was $1.5 million on a pre-tax loss of $(5.9) million , representing an effective income tax rate of 25.6 percent . The effective tax rate for the twenty-six weeks ended June 25, 2017 was lower than the statutory rate due to non-deductible transaction costs related to the tender offer and acquisition of Uniwheels, and due to earnings in countries with tax rates lower than the U.S. statutory rate.

The income tax provision for the twenty-six weeks ended June 26, 2016 , was $10.6 million , representing an effective income tax rate of 28.0 percent . The effective tax rate for the twenty-six weeks ended June 26, 2016 were lower than the statutory rate due to earnings in countries with tax rates lower than the U.S. statutory rate.


Note 16 – Retirement Plans

We have an unfunded salary continuation plan covering certain directors, officers and other key members of management.  We purchase life insurance policies on certain participants to provide, in part, for future liabilities. Cash surrender value of these policies, totaling $7.7 million and $7.5 million at June 25, 2017 and December 31, 2016 , respectively, are included in other non-current assets in the company's condensed consolidated balance sheets. Subject to certain vesting requirements, the plan provides for a benefit based on final average compensation, which becomes payable on the employee's death or upon attaining age 65 , if retired.  The plan was closed to new participants effective February 3, 2011. We have measured the plan assets and obligations of our salary continuation plan for all periods presented.

For the twenty-six weeks ended June 25, 2017 , payments to retirees or their beneficiaries totaled approximately $0.7 million .  We presently anticipate benefit payments in 2017 to total approximately $1.5 million .  The following table summarizes the components of net periodic pension cost for the first half of 2017 and 2016 .

 
Thirteen Weeks Ended
 
Twenty-six Weeks Ended
 
June 25, 2017
 
June 26, 2016
 
June 25, 2017
 
June 26, 2016
(Dollars in thousands)
 
 
 
 
 
 
 
Service cost
$

 
$

 
$

 
$

Interest cost
298

 
304

 
596

 
608

Net amortization
67

 
84

 
134

 
168

Net periodic pension cost
$
365

 
$
388

 
$
730

 
$
776




20


Note 17 – Debt

A summary of long-term debt and the related weighted average interest rates is shown below (in thousands):

 
 
June 25, 2017
Debt Instrument
 
Long-Term Debt
 
Debt Issuance Costs (1)
 
Long-Term Debt, Net
 
Weighted Average Interest Rate
 
 
 
 
 
 
 
 
 
Term loan facility
 
$
388,800

 
$
(13,465
)
 
$
375,335

 
4.8%
6.00% Senior Notes due 2025
 
279,051

 
(8,117
)
 
270,934

 
6.0%
Other
 
97,080

 
(3,493
)
 
93,587

 
2.1%
 
 
$
764,931

 
$
(25,075
)
 
739,856

 
 
Less: Current portion
 
 
 
 
 
(18,800
)
 
 
Long-term debt
 
 
 
 
 
$
721,056

 
 
 
 
 
 
 
 
 
 
 
(1)   Unamortized portion

 
 
 
 
 
 
 
 

Senior Notes

On June 15, 2017, Superior issued €250.0 million aggregate principal amount of 6.0% Senior Notes (the "Notes") due June 15, 2025. Interest on the Notes is payable semiannually, June 15 and December 25. Superior may redeem the Notes, in whole or in part, on or after June 15, 2020 at redemption prices of 103.000% and 101.500% of the principal amount thereof if the redemption occurs during the 12-month period beginning June 15, 2020 or 2021, respectively, and a redemption price of 100% of the principal amount thereof on or after June 15, 2022, in each case plus accrued and unpaid interest to, but not including, the applicable redemption date. In addition, the Company may redeem some or all of the Notes prior to June 15, 2020 at a price equal to 100.0% of the principal amount thereof plus a “make-whole” premium and accrued and unpaid interest, if any, to, but not including, the redemption date. Prior to June 15, 2020, the company may redeem up to 40% of the aggregate principal amount of the Notes using the proceeds of certain equity offerings at a certain redemption price. If we experience a change of control or sell certain assets, the company may be required to offer to purchase the Notes from the holders.

The Notes are senior unsecured obligations ranking equally in right of payment with all of its existing and future senior indebtedness and senior in right of payment to any subordinated indebtedness. The notes will be effectively subordinated in right of payment to the existing and future secured indebtedness of the Issuer, including the Senior Secured Credit Facilities (as defined below), to the extent of the assets securing such indebtedness.

Guarantee

The Notes are unconditionally guaranteed by all material wholly-owned direct and indirect domestic restricted subsidiaries of the company, with customary exceptions including, among other things, where providing such guarantees is not permitted by law, regulation or contract or would result in adverse tax consequences.

Covenants

Subject to certain exceptions, the indenture governing the Notes contains restrictive covenants that, among other things, limit the ability of Superior and the Subsidiary Guarantors to: (i) incur additional indebtedness or issue certain preferred stock; (ii) pay dividends on, or make distributions in respect of, their capital stock; (iii) make certain investments or other restricted payments; (iv) sell certain assets or issue capital stock of restricted subsidiaries; (v) create liens; (vi) merge, consolidate, transfer or dispose of substantially all of their assets; and (vii) engage in certain transactions with affiliates. These covenants are subject to a number of important limitations and exceptions that are described in the indenture.
The indenture provides for customary events of default that include, among other things (subject in certain cases to customary grace and cure periods): (i) nonpayment of principal, premium, if any, and interest, when due; (ii) breach of covenants in the indenture; (iii) a failure to pay certain judgments; and (v) certain events of bankruptcy and insolvency. If an event of default

21


occurs and is continuing, the Trustee or holders of at least 30% in principal amount of the then outstanding Notes may declare the principal, premium, if any, and accrued and unpaid interest on all the Notes to be due and payable. These events of default are subject to a number of important qualifications, limitations and exceptions that are described in the indenture. As of June 25, 2017, the Company was in compliance with all covenants under the indentures governing the Notes.

Senior Secured Credit Facilities

On March 22, 2017, Superior entered into a senior secured credit agreement (the "Credit Agreement") with Citibank, N.A, JP Morgan Chase N.A., Royal Bank of Canada and Deutsche Bank A.G. New York Branch (collectively, the "Lenders"). The Credit Agreement consisted of a $400.0 million senior secured term loan facility and a $160 million revolving credit facility (the "Senior Secured Credit Facilities"). Borrowings under the term loan facility will bear interest at a rate equal to, at the company’s option, either (a) LIBOR for the relevant interest period, adjusted for statutory reserve requirements, subject to a floor of 1.00% per annum, plus an applicable rate of 4.50% or (b) a base rate, subject to a floor of 2.00% per annum, equal to the highest of (1) the rate of interest in effect as publicly announced by the administrative agent as its prime rate, (2) the federal funds rate plus 0.50% and (3) LIBOR for an interest period of one month plus 1.00% , in each case, plus an applicable rate of 3.50% . Borrowings under the revolving credit facility initially bear interest at a rate of equal to, at the company’s option, either (a) LIBOR for the relevant interest period, adjusted for statutory reserve requirements, subject to a floor of 1.00% per annum, plus an applicable rate of 3.50% or (b) a base rate, subject to a floor of 2.00% per annum, equal to the highest of (1) the rate of interest in effect as publicly announced by the administrative agent as its prime rate, (2) the federal funds effective rate plus 0.50% and (3) LIBOR for an interest period of one month plus 1.00% , in each case, plus an applicable rate of 3.50% provided such rate may not be less than zero. The initial commitment fee for unused commitments under the revolving credit facility shall be 0.50% . After September 30, 2017, the applicable rates for borrowings under the revolving credit facility and commitment fees for unused commitments under the revolving credit facility shall be based upon the First Lien Net Leverage Ratio effective for the preceding quarter with LIBOR applicable rates between 3.50% and 3.00% , base rate applicable rates between 2.50% and 2.00% and commitment fees between .50% and .25% . Commitment fees are included in our condensed consolidated financial statements line, interest (expense) income, net. On June 25, 2017, the company repaid $11.2 million under the term loan facility resulting in a balance of $388.8 million .

As of June 25, 2017, the company had outstanding borrowings under the revolving credit facility of $27.6 million and letters of credit of $2.8 million , and had available unused commitments under the facility of $129.6 . The balance outstanding under the revolving credit facility is included in the debt table under "Other obligations".

Guarantees

Our obligations under the Credit Agreement are unconditionally guaranteed by all material wholly-owned direct and indirect domestic restricted subsidiaries of the company, with customary exceptions including, among other things, where providing such guarantees is not permitted by law, regulation or contract or would result in adverse tax consequences. The guarantees of such obligations, will be secured, subject to permitted liens and other exceptions, by substantially all of our assets and the guarantors’ assets, including but not limited to: (i) a perfected pledge of all of the capital stock issued by each of the Issuer’s direct wholly-owned domestic restricted subsidiaries or any guarantor (subject to certain exceptions) and up to 65 percent of the capital stock issued by each direct wholly-owned foreign restricted subsidiary of the Issuer or any guarantor (subject to certain exceptions) and (ii) perfected security interests in and mortgages on substantially all tangible and intangible personal property and material fee-owned real property of the Company and the guarantors (subject to certain exceptions and exclusions).

Covenants

The Senior Secured Credit Facilities contain a number of covenants that, among other things, restrict, subject to certain exceptions, our ability to incur additional indebtedness and guarantee indebtedness, create or incur liens, engage in mergers or consolidations, sell, transfer or otherwise dispose of assets, make investments, acquisitions, loans or advances or other restricted payments, pay dividends and distributions or repurchase our capital stock, prepay, redeem, or repurchase any subordinated indebtedness, enter into agreements which limit our ability to incur liens on our assets or that restrict the ability of non-Guarantor restricted subsidiaries to pay dividends or make other payments to us, and enter into certain transactions with our affiliates.

In addition, the Credit Agreement contains customary default provisions, representations and warranties and restrictive covenants. The Credit Agreement also contains a provision permitting the Lenders to accelerate the repayment of all loans outstanding under the Senior Secured Credit Facilities during an event of default. As of June 25, 2017, the company was in compliance with all covenants under the Credit Agreement.

Uniwheels Debt


22


In connection with the acquisition of Uniwheels, the company assumed $70.7 million of debt outstanding at the time of the acquisition. At June 25, 2017, $69.5 million of debt remained outstanding, including a term loan agreement, an equipment loan and a revolving line of credit. At June 25, 2017, $18.8 million of this debt was classified as current. The term loan and revolving credit facilities bear interest at Euribor plus 1.00 percent and the equipment loan bears interest at 1.00 percent . As part of the debt issued to finance the Acquisition, Superior deposited funds into a restricted cash account for the use in repayment of the Uniwheels’ term loan in accordance with requirements under the Senior Secured Credit Facility.


Note 18 – Commitments and Contingencies

Derivatives and Purchase Commitments

In order to hedge exposure related to fluctuations in foreign currency rates and the cost of certain commodities used in the manufacture of our products, we periodically may purchase derivative financial instruments such as forward contracts, options or collars to offset or mitigate the impact of such fluctuations. Programs to hedge currency rate exposure may address ongoing transactions including foreign-currency-denominated receivables and payables, as well as specific transactions related to purchase obligations. Programs to hedge exposure to commodity cost fluctuations would be based on underlying physical consumption of such commodities.

In accordance with our corporate risk management policies, we may enter into foreign currency forward and option contracts with financial institutions to protect against foreign exchange risks associated with certain existing assets and liabilities, certain firmly committed transactions and forecasted future cash flows. We have implemented a program to hedge a portion of our material foreign exchange exposures for up to approximately 42 months . For additional information on our derivatives, see Note 6, "Financial Instruments".

When market conditions warrant, we may also enter into purchase commitments to secure the supply of certain commodities used in the manufacture of our products, such as aluminum, natural gas and other raw materials. At June 25, 2017 , we did not have any purchase commitments in place for the delivery of aluminum, natural gas or other raw materials in 2017 .

Other

We are party to various legal and environmental proceedings incidental to our business.  Certain claims, suits and complaints arising in the ordinary course of business have been filed or are pending against us.  Based on facts now known, we believe all such matters are adequately provided for, covered by insurance, are without merit and/or involve such amounts that would not materially adversely affect our consolidated results of operations, cash flows or financial position.


Note 19 – Stock-Based Compensation

2008 Equity Incentive Plan

Our 2008 Equity Incentive Plan, as amended (the "Plan"), authorizes us to issue up to 3.5 million shares of common stock, along with non-qualified stock options, stock appreciation rights, restricted stock and performance units to our officers, key employees, non-employee directors and consultants.  At June 25, 2017 , there were 1.7 million shares available for future grants under this Plan. No more than 600,000 shares may be used under the Plan as “full value” awards, which include restricted stock and performance stock units.  It is our policy to issue shares from authorized but not issued shares upon the exercise of stock options. 

During the first quarter of 2015 , the company implemented a long term incentive program for the benefit of certain members of company management. The program was designed to strengthen employee retention and to provide a more structured incentive program to stimulate improvement in future company results. Per the terms of the program, participants were granted, in 2015 to 2017 , time value restricted stock units (“RSUs”), vesting ratably over a three year time period, and performance restricted stock units (“PSUs”), with a three year cliff vesting. Upon vesting, each restricted stock award is exchangeable for one share of the company’s common stock, with accrued dividends. The PSUs are categorized further into three individual categories whose vesting is contingent upon the achievement of certain targets as follows:

40 % of the PSUs vest upon certain Return on Invested Capital targets for 2015 to 2017 units
40 % of the PSUs vest upon certain Cumulative EPS targets for 2016 to 2017 units

23


40 % of the PSUs vest upon certain EBITDA margin targets for 2015 units
20 % of the PSUs vest upon certain market based Shareholder Return targets for 2015 to 2017 units.

Options

Options are granted at not less than fair market value on the date of grant and expire no later than ten years after the date of grant.  Options and restricted shares granted under this Plan generally require no less than a three year ratable vesting period. Stock option activity in the first half of 2017 are summarized in the following table:

 
Outstanding
 
Weighted
Average
Exercise
Price
 
Remaining
Contractual
Life in Years
 
Aggregate
Intrinsic
Value
 
 
 
 
 
 
 
 
Balance at December 31, 2016
231,625

 
$
18.88

 
3.1
 
$
1,845,263

Granted

 
$

 
 
 
 
Exercised

 
$

 
 
 
 
Canceled
(3,000
)
 
$
19.62

 
 
 
 
     Expired

 
$

 
 
 
 
Balance at June 25, 2017
228,625

 
$
18.87

 
 
 
 
 
 
 
 
 
 
 
 
Options vested or expected to vest at June 25, 2017
228,625

 
$
18.87

 
2.6
 
$
375,530

 
 
 
 
 
 
 
 
Exercisable at June 25, 2017
228,625

 
$
18.87

 
2.6
 
$
375,530


Restricted Stock Awards

Restricted stock awards, or “full value” awards, generally vest ratably over no less than a three year period. Shares of restricted stock granted under the Plan are considered issued and outstanding at the date of grant, have the same dividend and voting rights as other outstanding common stock, are subject to forfeiture if employment terminates prior to vesting and are expensed ratably over the vesting period. Dividends paid on the restricted shares granted under the Plan are non-forfeitable if the restricted shares do not ultimately vest. Restricted stock activity in the first half of 2017 are summarized in the following table:

 
Number of Awards
 
Weighted Average Grant Date Fair Value
 
Weighted Average Remaining Amortization Period (in Years)
 
 
 
 
 
 
Balance at December 31, 2016
144,295

 
$
19.43

 
0.5
Granted

 
$

 
 
Vested
(132,455
)
 
$
19.44

 
 
Canceled
(417
)
 
$
19.16

 
 
Balance at June 25, 2017
11,423

 
$
19.30

 
0.2


24


Restricted Stock Units

Restricted stock unit activity in the first half of 2017 is summarized in the following table:

 
Number of Awards
 
Weighted Average Grant Date Fair Value
 
Weighted Average Remaining Amortization Period (in Years)
 
 
 
 
 
 
Balance at December 31, 2016
127,567

 
$
22.03

 
1.7
Granted
80,288

 
$
24.12

 
 
Vested
(37,660
)
 
$
23.69

 
 
Canceled
(10,571
)
 
$
22.90

 
 
Balance at June 25, 2017
159,624

 
$
22.64

 
1.9

Restricted Performance Stock Units

Restricted performance stock unit activity in the first half of 2017 is summarized in the following table:

 
Number of Awards
 
Weighted Average Grant Date Fair Value
 
Weighted Average Remaining Amortization Period (in Years)
 
 
 
 
 
 
Balance at December 31, 2016
227,193

 
$
21.72

 
1.6
Granted
118,157

 
$
23.90

 
 
Vested

 
$

 
 
Canceled
(29,921
)
 
$
22.45

 
 
Balance at June 25, 2017
315,429

 
$
22.47

 
2.0

Stock-Based Compensation

Stock-based compensation expense related to our equity incentive plans in accordance with U.S. GAAP was allocated as follows:
 
Thirteen Weeks Ended
 
Twenty-six Weeks Ended
 
June 25,
2017
 
June 26,
2016
 
June 25,
2017
 
June 26,
2016
(Dollars in thousands)
 
 
 
 
 
 
 
Cost of sales
$
(138
)
 
$
282

 
$
49

 
$
358

Selling, general and administrative expenses
(154
)
 
1,476

 
938

 
1,956

Stock-based compensation expense before income taxes
(292
)
 
1,758

 
987

 
2,314

Income tax benefit
108

 
(515
)
 
(364
)
 
(648
)
Total stock-based compensation expense after income taxes
$
(184
)
 
$
1,243

 
$
623

 
$
1,666


As of June 25, 2017 , a total of $5.8 million of unrecognized compensation cost related to non-vested awards is expected to be recognized over a weighted average period of approximately 1.9 years .  There were no significant capitalized stock-based compensation costs at June 25, 2017 and December 31, 2016 .


25



Note 20 Common Stock Repurchase Programs
In October 2014, our Board of Directors approved a stock repurchase program (the "2014 Repurchase Program") which authorized the repurchase of up to $30.0 million of our common stock. Under the 2014 Repurchase Program, we repurchased common stock from time to time on the open market or in private transactions. Shares repurchased under the 2014 Repurchase Program totaled 1,056,954 shares at a cost of $19.6 million . The 2014 Repurchase Program was completed in the beginning of 2016, with purchases of 585,970 shares for a cost of $10.3 million . The repurchased shares described above were either canceled and retired or added to treasury stock after the reincorporation in Delaware in 2015.

In January of 2016, our Board of Directors approved another stock repurchase program (the “2016 Repurchase Program”), authorizing the repurchase of up to $50.0 million of common stock.  Under the 2016 Repurchase Program, we may repurchase common stock from time to time on the open market or in private transactions. The timing and extent of the repurchases under the 2016 Repurchase Program will depend upon market conditions and other corporate considerations in our sole discretion. Shares repurchased under the 2016 Repurchase Program totaled 137,699 shares of company stock at a cost of $2.8 million in the first half of 2016. Shares repurchased under the 2016 Repurchase Program totaled 215,841 shares of company stock at a cost of $5.0 million in the first half of 2017 . Superior does not anticipate any repurchases under the 2016 Repurchase Program in the near term.

26



Item 2.  Management’s Discussion and Analysis of Financial Condition and Results of Operations


Forward-Looking Statements

The Private Securities Litigation Reform Act of 1995 provides a safe harbor for forward-looking statements made by us or on our behalf.  We have included or incorporated by reference in this Quarterly Report on Form 10-Q (including in the sections entitled "Risk Factors" and “Management's Discussion and Analysis of Financial Condition and Results of Operations”) and from time to time our management may make statements that may constitute “forward-looking statements” within the meaning of Section 27A of the Securities Exchange Act of 1933 and Section 21E of the Securities Act of 1934. These forward-looking statements are based upon management's current expectations, estimates, assumptions and beliefs concerning future events and conditions and may discuss, among other things, anticipated future performance (including sales and earnings), expected growth, future business plans and costs and potential liability for environmental-related matters. Any statement that is not historical in nature is a forward-looking statement and may be identified by the use of words and phrases such as “expects,” “anticipates,” “believes,” “will,” “will likely result,” “will continue,” “plans to” and similar expressions. These statements include our belief regarding general automotive industry and market conditions and growth rates, as well as general domestic and international economic conditions.
 
Readers are cautioned not to place undue reliance on forward-looking statements. Forward-looking statements are necessarily subject to risks, uncertainties and other factors, many of which are outside the control of the company, which could cause actual results to differ materially from such statements and from the company's historical results and experience. These risks, uncertainties and other factors include, but are not limited to, those described in Part I - Item 1A - "Risk Factors" and Part II - Item 7 - “Management's Discussion and Analysis of Financial Condition and Results of Operations” of our Annual Report on Form 10-K for the year ended December 31, 2016 and Part II - Item 1A - "Risk Factors" and Part I - Item 2 - “Management's Discussion and Analysis of Financial Condition and Results of Operations” of this Quarterly Report on Form 10-Q and elsewhere in the Quarterly Report and those described from time to time in our other reports filed with the Securities and Exchange Commission.

Readers are cautioned that it is not possible to predict or identify all of the risks, uncertainties and other factors that may affect future results and that the risks described herein should not be considered to be a complete list. Any forward-looking statement speaks only as of the date on which such statement is made, and the company undertakes no obligation to update or revise any forward-looking statement, whether as a result of new information, future events or otherwise.

Management’s Discussion and Analysis of Financial Condition and Results of Operations should be read in conjunction with the accompanying unaudited Condensed Consolidated Financial Statements and notes thereto and with the audited Consolidated Financial Statements and notes thereto and Management’s Discussion and Analysis of Financial Condition and Results of Operations included in our 2016 Annual Report on Form 10-K.


Executive Overview

Overview of Superior
Our principal business is the design and manufacture of aluminum wheels for sale to the OEMs and aftermarket suppliers in Europe. We believe we are the #1 supplier of aluminum wheels to OEMs in North America and #3 in Europe following the acquisition of Uniwheels. Our major customers include Ford Motor Company ("Ford”), General Motors ("GM”), Toyota Motor Corporation (“Toyota”), Audi, Mercedes-Benz and The Volvo Group (“Volvo”), which make up more than two-thirds of our total sales. We also believe we are the #1 aftermarket supplier of aluminum wheels in Europe following the acquisition of Uniwheels. Our aluminum wheels are primarily sold to OEMs for factory installation, as either optional or standard equipment, on many vehicle models. Superior has nine manufacturing facilities in North America and Europe.

Strategic Direction

Our strategic mission is to become the global industry leader and innovator of premium wheels and finishes. In order to improve our strategic position, we have augmented our product portfolio with wheels containing higher technical content and greater differentiation. We continue to invest in new manufacturing processes targeting the more sophisticated finishes and larger diameter products which typically have more value. Currently, we are constructing a physical vapor deposition ("PVD") finishing facility that creates bright chrome-like finishes that are produced with an environmentally safe process. The addition of PVD wheel coating capability and capacity will be completed during 2017 and will be operational in 2018. We believe this direction is consistent with the trend of the market and needs of our customers. During the first quarter of 2017, we found a highly

27

Table of Contents

complementary acquisition opportunity in Uniwheels (UNW-PL) to further our strategic mission to become the global innovative leader in the aluminum wheel industry.

Tender Offer

We announced on March 23, 2017 that we had entered into various agreements to commence a tender offer to acquire 100% of the outstanding equity interests of Uniwheels through the Acquisition Sub. In the first step of the acquisition, on March 23, 2017, Superior obtained a commitment from the owner of approximately 61 percent of the outstanding stock of Uniwheels, UNIWHEELS Holdings (Malta) Ltd., which irrevocably agreed to tender its shares. Since the remaining ownership of Uniwheels is listed on the Warsaw Stock Exchange, the acquisition was required to be carried out in accordance with the Polish Act of 29 July 2005 on Public Offerings and the Conditions for Introducing Financial Instruments to Organized Trading and Public Companies (the “Public Offering Act”). On May 30, 2017, Superior acquired 92.3 percent of the outstanding stock of Uniwheels for approximately $703.0 million. Superior anticipates that the process of acquiring the remaining 7.7 percent of Uniwheels’ outstanding shares will take approximately eight to ten months. The aggregate equity purchase price of the acquisition (assuming the remaining 7.7 percent of Uniwheels’ stock is acquired for cash consideration of Polish Zloty 247.87 per share) (the price paid to Uniwheels’ shareholders in the Tender Offer and an exchange rate of 1.00 Dollar = 3.74193 Polish Zloty) will be approximately $778.0 million. We entered into foreign currency hedges prior to the closing of the transaction to mitigate currency risk associated with the settlement of the Tender Offer.

We entered into foreign currency hedges prior to the closing of the First Step Acquisition intended to reduce currency risk associated with the settlement of the Tender Offer. The net benefit of the Hedging Transactions to Superior reduces the total anticipated purchase price of the Acquisition to $766.2 million.

UNIWHEELS

Uniwheels is one of the leading manufacturers of OEM aluminum wheels for passenger cars and light-duty vehicles in Europe and is one of the few technological leaders in the worldwide aluminum wheel industry. Uniwheels is a leading manufacturer and supplier of wheels to OEMs in Europe, including Audi, Mercedes-Benz, Volvo, Volkswagen, BMW, Honda Motor Company, Ltd. (“Honda”), Jaguar/Land Rover, Peugeot, Porsche AG (“Porsche”) and Suzuki Motor Corporation (“Suzuki”). Uniwheels is also the market-leading manufacturer of alloy wheels for the automotive aftermarket in Europe. The aftermarket wheels include the well-known brands ATS, RIAL, ALUTEC and ANZIO. Uniwheels has four production facilities, three of which are located in Poland and one which is located in Germany. Additionally, the headquarters for Uniwheels is located in Germany.
                                                    
Acquisition

The combination of Superior and Uniwheels will create what we estimate will be the world’s second largest producer of aluminum wheels for the OEM automotive market, with combined annual manufacturing capacity of approximately 23 million wheels. The highly increased scale of the combined business creates a stronger platform from which to invest in the future for growth, new technology and operational excellence to better serve our customers. A basic profile comparing Superior and Uniwheels is shown below.

28

Table of Contents

A2016CONSOLIDATINGMAPSOFSUPA.JPG
Note: Uniwheels annual report sales are 464 million Euros which translates to approximately $514 million U.S. dollars.


With almost no current overlap of customers, the combined company will have a much broader customer mix and reduced customer concentration, as well as significant participation in two of the largest automotive markets in the world represented by North America and Europe, with a broader reach to serve long-standing customers participating in both geographic markets. We expect to leverage manufacturing processes, product design and engineering capabilities of both companies to accelerate achievement of operational excellence to serve the market and enhance profitability.

Customer Comparisons

The following chart shows the composition of the customer base of Superior and Uniwheels for 2016 prior to the acquisition and the anticipated customer base after the acquisition.

29

Table of Contents

A2017PROFORMAREVSUPANDA01.JPG
Listed in the table below are several key indicators we use to monitor our financial condition and operating performance.



30

Table of Contents

Results of Operations
 
 
 
 
 
 
 
 
 
 
 
 
Thirteen Weeks Ended
Selected data
 
June 25,
2017
 
Percent of Net Sales
 
June 26,
2016
 
Percent of Net Sales
 
Change
(Dollars in thousands, except per share amounts)
 
 
 
 
 
 
 
 
 
 
Net sales
 
 
 
 
 
 
 
 
 
 
   North America
 
$
186,898

 
77.7
 %
 
$
182,709

 
100.0
 %
 
$
4,189

   Europe
 
53,730

 
22.3
 %
 

 
 %
 
53,730

Net sales
 
240,628

 
100.0
 %
 
182,709

 
100.0
 %
 
57,919

Cost of sales
 
220,601

 
91.7
 %
 
153,012

 
83.7
 %
 
67,589

Restructuring (recovery) costs
 
(78
)
 
 %
 
157

 
0.1
 %
 
(235
)
Gross profit
 
20,105

 
8.4
 %
 
29,540

 
16.2
 %
 
(9,435
)
Selling, general and administrative
 
22,103

 
9.2
 %
 
10,000

 
5.5
 %
 
12,103

Interest (expense) income, net
 
(14,729
)
 
(6.1
)%
 
79

 
 %
 
(14,808
)
Other income (expense), net
 
7,486

 
3.1
 %
 
(372
)
 
(0.2
)%
 
7,858

Benefit (provision) for income taxes
 
1,722

 
0.7
 %
 
(6,082
)
 
(3.3
)%
 
7,804

Less: Net loss attributable to non-controlling interest, net of tax
 
247

 
0.1
 %
 

 
 %
 
$
247

Net (loss) income attributable to Superior
 
$
(7,272
)
 
(3.0
)%
 
$
13,165

 
7.2
 %
 
$
(20,437
)
Value added sales *
 
$
130,381

 
54.2
 %
 
$
101,190

 
55.4
 %
 
$
29,191

Adjusted EBITDA *
 
$
29,479

 
12.3
 %
 
$
27,948

 
15.3
 %
 
$
1,531

Diluted (loss) income per share
 
$
(0.41
)
 
 
 
$
0.52

 
 
 
$
(0.93
)
Unit shipments in thousands
 
3,794

 
 
 
3,071

 
 
 
723

* Refer to the definition of the terms in the “Non-GAAP Financial Measures” section.

Net sales for the second quarter of 2017 increased in comparison to the second quarter of 2016 due to the inclusion of one month of sales of our European operations from Uniwheels. Our North American sales also increased by $4.2 million in the second quarter of 2017 due mainly to an increase in aluminum prices. The average selling price on value added sales of our wheels increased 4.3 percent, reflective of stronger product mix primarily due to an increase in average diameter of wheels sold and more complex finishes.

Consolidated cost of sales increased in the second quarter of 2017 in comparison to the second quarter of 2016 due to the inclusion of one month of our European operations. C ost of sales in our North American operations increased in the second quarter of 2017 due mainly to increased raw material costs of aluminum and higher energy costs. The increase in aluminum cost is driven by higher market prices and is mainly passed through to the customer. Higher costs for repairs and maintenance and supplies and small tools reflect our continued focus on preventive maintenance programs.

Selling, general and administrative expenses for the second quarter of 2017 increased significantly in comparison to the second quarter of 2016 due to acquisition-related costs that were expensed. The increase primarily reflects a $12.7 million increase reflective of the acquisition support costs.


31

Table of Contents

Net interest expense for the second quarter of 2017 was an expense of $14.7 million and for the second quarter of 2016, net interest expense was income of less than $0.1 million. Interest expense increased in the second quarter of 2017 due to the new debt incurred for the acquisition-related activities.

Net other income (expense) was an income of $7.5 million in the second quarter of 2017 and expense of $0.4 million in the second quarter of 2016. Foreign exchange gains and (losses) included in net other income (expense) were exchange gains of $6.5 million in the second quarter of 2017 and exchange losses of $0.4 million in the second quarter of 2016.

The income tax benefit for the second quarter ended June 25, 2017 was $1.7 million on a pre-tax loss of ($9.2) million, representing an effective income tax benefit of 18.6 percent. The effective tax rate for the thirteen weeks ended June 25, 2017 was lower than the statutory rate due to non-deductible transaction costs related to the Tender Offer and acquisition of Uniwheels AG, and due to earnings in countries that are taxed below the U.S. statutory rate.

Net loss in the second quarter of 2017 was $7.3 million, or $0.41 per diluted share, compared to net income in the second quarter of 2016 of $13.2 million, or $0.52 per diluted share. The decrease in net income in the current year was due to acquisition-related expenses and operational inefficiencies.

Segment Sales and Income from Operations

 
 
 
 
 
 
 
Thirteen Weeks Ended
 
 
 
 
June 25, 2017
 
June 26, 2016
 
Change
 
(Dollars in thousands)
 
 
 
 
 
 
Selected data
 
 
 
 
 
 
Net sales
 
 
 
 
 
 
   North America
$
186,898

 
$
182,709

 
$
4,189

 
   Europe
53,730

 

 
53,730

 
      Total net sales
$
240,628

 
$
182,709

 
$
57,919

 
 
 
 
 
 
 
 
(Loss) Income from Operations
 
 
 
 
 
 
   North America
$
(1,098
)
 
$
19,540

 
$
(20,638
)
 
   Europe
(900
)
 

 
(900
)
 
      Total income from operations
$
(1,998
)
 
$
19,540

 
$
(21,538
)
 

North America
In the second quarter of 2017, net sales of our North American plants increased due mainly to aluminum prices. During the second quarter of 2017, unit sales declined reflecting the overall industry reduction in unit shipments and the timing of newer products going to market. A higher aluminum value increased revenues by approximately $11.9 million in 2017 when compared to 2016. On a product level perspective the Malibu and the F-150 experienced the largest decreases offset by newer introductions of the Equinox and the Continental.

During the second quarter of 2017, the company incurred $12.7 million of costs associated with the acquisition of Uniwheels. During the second quarter of 2017, we continued to make progress in turning around our production issues in one of our plants in Mexico that started in the third quarter of 2016. However, the gross profit percentage decreased in the second quarter of 2017 with the rising costs of aluminum.

Europe
The acquisition of Uniwheels, which represents our European operations, occurred on May 30, 2017 and, as a result, we included one month of their operations in our consolidated statements. During the month of June 2017, the European operations sales increased by 28 percent compared to the one month of June 2016. The June 2017 income from operations for the one month decreased in comparison to last year due to the amortization related to the new intangibles and other adjustments related to the acquisition.


32

Table of Contents

 
 
 
 
 
 
 
 
 
 
 
 
 
Twenty-six Weeks Ended
Selected data
 
June 25, 2017
 
Percent of Net Sales
 
June 26, 2016
 
Percent of Net Sales
 
Change
(Dollars in thousands, except per share amounts)
 
 
 
 
 
 
 
 
 
 
Net sales
 
 
 
 
 
 
 
 
 
 
   North America
 
$
361,118

 
87.0
 %
 
$
368,774

 
100.0
 %
 
$
(7,656
)
   Europe
 
53,730

 
13.0
 %
 

 
 %
 
53,730

Net sales
 
414,848

 
100.0
 %
 
368,774

 
100.0
 %
 
46,074

Cost of sales
 
375,409

 
90.5
 %
 
311,332

 
84.4
 %
 
64,077

Restructuring costs
 
130

 
 %
 
187

 
0.1
 %
 
(57
)
Gross profit
 
39,309

 
9.5
 %
 
57,255

 
15.5
 %
 
(17,946
)
Selling, general and administrative
 
37,363

 
9.0
 %
 
18,993

 
5.2
 %
 
18,370

Interest (expense) income, net
 
(15,025
)
 
(3.6
)%
 
111

 
 %
 
(15,136
)
Other income (expense), net
 
7,138

 
1.7
 %
 
(105
)
 
 %
 
7,243

Benefit (provision) for income taxes
 
1,524

 
0.4
 %
 
(10,640
)
 
(2.9
)%
 
12,164

Less: net loss attributable to non-controlling interest, net of tax
 
247

 
0.1
 %
 

 
 %
 
247

Net (loss) income attributable to Superior
 
$
(4,170
)
 
(1.0
)%
 
$
27,628

 
7.5
 %
 
$
(31,798
)
Value added sales *
 
$
225,842

 
54.4
 %
 
$
203,529

 
55.2
 %
 
$
22,313

Adjusted EBITDA *
 
$
48,602

 
11.7
 %
 
$
56,047

 
15.2
 %
 
$
(7,445
)
Diluted (loss) income per share
 
$
(0.28
)
 
 
 
$
1.08

 
 
 
$
(1.36
)
Unit shipments in thousands
 
6,637

 
 
 
6,251

 
 
 
386

* Refer to the definition of the terms in the “Non-GAAP Financial Measures” section.

Net sales for the first half of 2017 increased in comparison to the first half of 2016 due to the inclusion of one month of sales of our European operations. North American sales decreased by $7.7 million in the first half of 2017 due mainly to a decrease in volume. The average selling price on value added sales of our wheels increased 4.5 percent, reflective of higher aluminum prices.

Consolidated cost of sales for the first half of 2017 were $375.4 million, as compared to $311.3 million for the first half of 2016. The increase was mainly due to the inclusion of one month of our European operations coupled with higher raw material costs of aluminum. The increase in aluminum cost was driven by higher market prices and is mainly passed through to the customer.

Selling, general and administrative expenses for the first half of 2017 increased significantly in comparison to the first half of 2016 due to the acquisition-related costs that were expensed. The increase primarily reflects a $19.7 million increase reflective of the acquisition support costs.

Net interest expense in the first half of 2017 was an expense of $15.0 million and in the first half of 2016, net interest expense was income of $0.1 million. Interest expense increased in the first half of 2017 due to the new debt incurred for the acquisition-related activities.

Net other income was $7.1 million in the first half of 2017 and net other expense of $0.1 million in the first half of 2016. Foreign exchange gains and (losses) included in net other income (expense) were exchange gains of $6.1 million in the first half of 2017 and exchange losses of $0.4 million in the first half of 2016.

The income tax benefit for the first half of 2017 was $1.5 million on a pre-tax loss of $5.9 million, representing an effective income tax benefit of 25.6 percent. The effective tax rate for the twenty-six weeks ended June 25, 2017 was lower than the statutory rate due to non-deductible transaction costs related to the tender offer and acquisition of Uniwheels AG, and due to earnings in countries that are taxed below the U.S. statutory rate.


33

Table of Contents

Net loss in the first half of 2017 was $4.2 million, or $0.28 per diluted share, compared to net income in the first half of 2016 of $27.6 million, or $1.08 per diluted share.

Segment Sales and Income from Operations
 
Twenty-six Weeks Ended
 
 
 
June 25, 2017
 
June 26, 2016
 
Change
(Dollars in thousands)
 
 
 
 
 
Selected data
 
 
 
 
 
Net Sales
 
 
 
 
 
   North America
$
361,118

 
$
368,774

 
$
(7,656
)
   Europe
53,730

 

 
53,730

      Total net sales
$
414,848

 
$
368,774

 
$
46,074

 

 

 

Income (loss) from Operations
 
 
 
 
 
   North America
$
2,846

 
$
38,262

 
$
(35,416
)
   Europe
(900
)
 

 
(900
)
      Total income from operations
$
1,946

 
$
38,262

 
$
(36,316
)

North America
In the first half of 2017, net sales of our North America plants decreased due mainly to a unit shipment decline reflecting the overall industry reduction in unit shipments and the timing of newer products going to market. A higher aluminum value increased revenues by approximately $18.2 million in the first half of 2017 when compared to the first half of 2016. On a product level perspective the Malibu and the F-150 experienced the largest decreases offset by newer introductions of the Equinox and the Kicks.

During the first half of 2017, the company incurred $19.7 million of additional costs associated with the acquisition of Uniwheels. During the first half of 2017 we continued to make progress in turning around our production issues in one of our plants in Mexico that started in the third quarter of 2016.

Europe
The acquisition of Uniwheels, which represents our European operations, occurred on May 30, 2017 and, as a result, we included one month of their operations in our consolidated statements. During the month of June 2017, the European operations sales increased by 28 percent compared to the one month of June 2016. The June 2017 income from operations for the one month decreased in comparison to last year due to the amortization related to the new intangibles and other adjustments related to the acquisition.
 

Financial Condition, Liquidity and Capital Resources

Our sources of liquidity primarily include cash, cash equivalents and short-term investments and net cash provided by operating activities, our senior notes and borrowings under available debt facilities and, from time to time, other external sources of funds.  Working capital (current assets minus current liabilities) and our current ratio (current assets divided by current liabilities) were $327.0 million and 2.8:1, respectively, at June 25, 2017, versus $168.1 million and 3.0:1 at December 31, 2016.  As of June 25, 2017, our cash, cash equivalents, restricted cash and short-term investments totaled $122.0 million compared to $58.5 million at December 31, 2016.

Our working capital requirements, investing activities and cash dividend payments have historically been funded from internally generated funds, proceeds from the exercise of stock options or existing cash, cash equivalents and short-term investments, and we believe these sources will continue to meet our capital requirements in the foreseeable future.


34

Table of Contents

As part of our commitment to enhancing shareholder value, we have been repurchasing our common stock. Beginning in 2013 through the end of our fiscal year 2016, we have repurchased 3,608,401 shares for a cost of $70.3 million. Thus far in 2017, we have repurchased 215,841 shares for a cost of $5.0 million. We do not anticipate additional share repurchases in the near term.

The following table presents a summary of the net increase in cash and cash equivalents in the periods presented:

(Dollars in thousands)
 
Twenty-six Weeks Ended
 
 
June 25, 2017
 
June 26, 2016
 
Change
Net cash (used in) provided by operating activities
 
$
(10,093
)
 
$
24,522

 
$
(34,615
)
Net cash used in investing activities
 
(720,684
)
 
(17,491
)
 
(703,193
)
Net cash provided by (used in) financing activities
 
793,596

 
(21,432
)
 
815,028

Effect of exchange rate changes on cash
 
615

 
(160
)
 
775

Net increase in cash and cash equivalents
 
$
63,434

 
$
(14,561
)
 
$
77,995


Operating Activities

Net cash used by operating activities was $10.1 million for the twenty-six week period ended June 25, 2017, compared to net cash provided by operating activities of $24.5 million for the comparable period a year ago.  The decrease in cash flow provided by operating activities was mainly due to lower net income, which was mainly related to the acquisition-related fees, and an increase in inventory and receivable levels during the first six months of 2017.

Investing Activities

Net cash used in investing activities was $720.7 million for the first six months of 2017 compared to $17.5 million in the comparable period last year. Net cash used in investing activities was higher in 2017 due to the Uniwheels acquisition and increased capital investments.

Financing Activities

Net cash provided by financing activities was $793.6 million for the first six months of 2017 compared to net cash used in financing activities of $(21.4) million in the comparable period last year. Net cash provided by financing activities was higher in 2017 due to increased debt to finance the Uniwheels acquisition.

Non-GAAP Financial Measures

In this quarterly report, we discuss two important measures that are not calculated according to U.S. GAAP, value added sales and Adjusted EBITDA.

Value added sales is a key measure that is not calculated according to U.S. GAAP. In the discussion of operating results, we provide information regarding value added sales. Value added sales represent net sales less the value of aluminum and services provided by outside service providers that are included in net sales. As discussed further below, arrangements with our customers allow us to pass on changes in aluminum prices and outside service provider costs; therefore, fluctuations in underlying aluminum prices and the use of outside service providers generally do not directly impact our profitability. Accordingly, value added sales is worthy of being highlighted for the benefit of users of our financial statements. Our intent is to allow users of the financial statements to consider our net sales information both with and without the aluminum and outside service provider cost components thereof. Management utilizes value added sales as a key metric to determine growth of the company because it eliminates the volatility of aluminum prices.

35

Table of Contents

 
Thirteen Weeks Ended
 
Twenty-six Weeks Ended
 
June 25, 2017
 
June 26, 2016
 
June 25, 2017
 
June 26, 2016
(Dollars in thousands)
 
 
 
 
 
 
 
Net Sales
$
240,628

 
$
182,709

 
$
414,848

 
$
368,774

Less, aluminum value and outside service provider costs
(110,247
)
 
(81,519
)
 
(189,006
)
 
(165,245
)
Value added sales
$
130,381

 
$
101,190

 
$
225,842

 
$
203,529


Adjusted EBITDA is a key measure that is not calculated according to U.S. GAAP. Adjusted EBITDA is defined as earnings before interest income and expense, income taxes, depreciation, amortization, acquisition costs, restructuring and other closure costs and impairments of long-lived assets and investments. We use Adjusted EBITDA as an important indicator of the operating performance of our business. We use Adjusted EBITDA in our internal financial forecasts and models when establishing internal operating budgets, supplementing the financial results and forecasts reported to our Board of Directors and evaluating short-term and long-term operating trends in our operations. We believe the Adjusted EBITDA financial measure assists in providing a more complete understanding of our underlying operational measures used to manage our business, to evaluate our performance compared to prior periods and the marketplace and to establish operational goals. We believe that these non-GAAP financial measures are useful to investors because they allow investors to evaluate the effectiveness of the methodology and information used by management in our financial and operational decision-making. Adjusted EBITDA is a non-GAAP financial measure and should not be considered in isolation or as a substitute for financial information provided in accordance with U.S. GAAP. This non-GAAP financial measure may not be computed in the same manner as similarly titled measures used by other companies.

Adjusted EBITDA as a percentage of net sales is a key measure that is not calculated according to U.S. GAAP. Adjusted EBITDA as a percentage of net sales is defined as Adjusted EBITDA divided by net sales.

Adjusted EBITDA as a percentage of value added sales is a key measure that is not calculated according to U.S. GAAP. Adjusted EBITDA as a percentage of value added sales is defined as Adjusted EBITDA divided by value added sales.

The following table reconciles our net income, the most directly comparable GAAP financial measure, to our Adjusted EBITDA:
 
Thirteen Weeks Ended
 
Twenty-six Weeks Ended
 
June 25, 2017
 
June 26, 2016
 
June 25, 2017
 
June 26, 2016
(Dollars in thousands)
 
 
 
 
 
 
 
Net (loss) income
$
(7,272
)
 
$
13,165

 
$
(4,170
)
 
$
27,628

Interest expense (income), net
14,729

 
(79
)
 
15,025

 
(111
)
Income tax provision
(1,722
)
 
6,082

 
(1,524
)
 
10,640

Depreciation
11,100

 
8,637

 
19,470

 
17,281

Acquisition support costs
12,722

 

 
19,684

 

Closure costs (excluding accelerated depreciation)
(78
)
 
143

 
117

 
609

Adjusted EBITDA
$
29,479

 
$
27,948

 
$
48,602

 
$
56,047

Adjusted EBITDA as a percentage of net sales
12.3
%
 
15.3
%
 
11.7
%
 
15.2
%
Adjusted EBITDA as a percentage of value added sales
22.6
%
 
27.6
%
 
21.5
%
 
27.5
%

Critical Accounting Estimates

The preparation of consolidated financial statements in conformity with U.S. GAAP requires management to apply significant judgment in making estimates and assumptions that affect amounts reported therein, as well as financial information included in this Management’s Discussion and Analysis of Financial Condition and Results of Operations. These estimates and assumptions, which are based upon historical experience, industry trends, terms of various past and present agreements and contracts, and

36

Table of Contents

information available from other sources that are believed to be reasonable under the circumstances, form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent through other sources. There can be no assurance that actual results reported in the future will not differ from these estimates, or that future changes in these estimates will not adversely impact our results of operations or financial condition.


Risk Management

We are subject to various risks and uncertainties in the ordinary course of business due, in part, to the competitive global nature of the industry in which we operate, changing commodity prices for the materials used in the manufacture of our products and the development of new products.

We have operations in Mexico with sale and purchase transactions denominated in both pesos and dollars. The peso is the functional currency of certain of our operations in Mexico.  The settlement of accounts receivable and accounts payable for these operations requires the transfer of funds denominated in the Mexican peso, the value of which increased 12.6 percent in relation to the U.S. dollar in the first half of 2017 .  Foreign currency translation gains totaled $8.1 million in the first half of 2017 and foreign currency translation losses totaled $0.2 million during the first half of 2016 .  All translation gains and losses are included in other income (expense) in the condensed consolidated statements of operations.

As it relates to foreign currency translation gains and losses, however, since 1990, the Mexican peso has experienced periods of relative stability followed by periods of major declines in value. The impact of these changes in value relative to our Mexico operations resulted in a cumulative unrealized translation loss at June 25, 2017 of $92.5 million . Translation gains and losses are included in other comprehensive income in the condensed consolidated statements of comprehensive income.

We also have operations in Europe with sale and purchase transactions denominated in Euros and Zloty. The Euro is the functional currency of certain of our operations in Europe.  The settlement of accounts receivable and accounts payable for these operations requires the transfer of funds denominated in the Euro, the value of which increased 0.4 percent in relation to the U.S. dollar in June 2017.  Foreign currency translation gains totaled $4.9 million in the first half of 2017.  All transaction gains and losses are included in other income (expense) in the condensed consolidated statements of operations.

As it relates to foreign currency translation gains and losses, the Euro has experienced periods of relative stability in value. The impact of these changes in value relative to our European operations resulted in a cumulative unrealized translation gain at June 25, 2017 of $10.7 million. Translation gains and losses are included in other comprehensive income in the condensed consolidated statements of comprehensive income.

When market conditions warrant, we may enter into purchase commitments to secure the supply of certain commodities used in the manufacture of our products, such as aluminum, natural gas and other raw materials. We currently have no purchase commitments in place for the delivery of aluminum, natural gas or other raw materials in 2017.


Item 3. Quantitative and Qualitative Disclosures About Market Risk

Foreign Currency.   A significant portion of our business operations are conducted in Mexico and Europe. As a result, we have a certain degree of market risk with respect to our cash flows due to changes in foreign currency exchange rates when transactions are denominated in currencies other than our functional currency, including inter-company transactions.

In accordance with our corporate risk management policies, we may enter into foreign currency forward and option contracts with financial institutions to protect against foreign exchange risks associated with certain existing assets and liabilities, certain firmly committed transactions and forecasted future cash flows. We have implemented a program to hedge a portion of our material foreign exchange exposures in Mexico, for up to approximately 42 months. However, we may choose not to hedge certain foreign exchange exposures for a variety of reasons including, but not limited to, accounting considerations and the prohibitive economic cost of hedging particular exposures. We do not use derivative contracts for trading, market-making, or speculative purposes. For additional information on our derivatives, see Note 5, "Derivative Financial Instruments" in Notes to Condensed Consolidated Financial Statements in Item 1.

At June 25, 2017, the fair value liability of foreign currency exchange derivatives for the peso was $4.1 million. The potential loss in fair value for such financial instruments from a 10 percent adverse change in quoted foreign currency exchange rates would be $18.0 million at June 25, 2017.


37

Table of Contents

During the first half of 2017, the Mexican peso to U.S. dollar exchange rate averaged 19.58 pesos to $1.00. Based on the balance sheet at June 25, 2017 the value of net assets for our operations in Mexico was 2,434 million pesos. Accordingly, a 10 percent change in the relationship between the peso and the U.S. dollar may result in a translation impact of between $11.3 million and $13.8 million, which would be recognized in other comprehensive income.

Since May 30, 2017, the Euro to U.S. dollar exchange rate averaged 0.8918 Euros to $1.00. Based on the balance sheet at June 25, 2017 the value of net assets for our operations in Europe was 53.6 million Euros. Accordingly, a 10 percent change in the relationship between the Euro and the U.S. dollar may result in a translation impact of approximately $6.0 million, which would be recognized in other comprehensive income.

Our business requires us to settle transactions between currencies in both directions - i.e., peso, Euro and Zloty to U.S. dollar and vice versa. To the greatest extent possible, we attempt to match the timing of transaction settlements between currencies to create a “natural hedge.” For the first half of 2017, we had a $13.0 million net foreign exchange transaction gain related to the peso, Euro and Zloty. Based on the current business model and levels of production and sales activity, the net imbalance between currencies depends on specific circumstances. While changes in the terms of the contracts with our customers will be creating an imbalance between currencies that we are hedging with foreign currency forward contracts, there can be no assurances that our hedging program will effectively offset the impact of the imbalance between currencies or that the net transaction balance will not change significantly in the future.

Commodity Purchase Commitments.   When market conditions warrant, we enter into purchase commitments to secure the supply of certain commodities used in the manufacture of our products, such as aluminum, natural gas and other raw materials. However, we do not enter into derivatives or other financial instrument transactions for speculative purposes. At June 25, 2017, we had no purchase commitments in place for the delivery of aluminum, natural gas or other raw materials in 2017.

Also see Item 7A - "Quantitative and Qualitative Disclosures About Market Risk" in Part II of our 2016 Annual Report on Form 10-K and Item 2 - "Management’s Discussion and Analysis of Financial Condition and Results of Operations – Risk Management” in this Quarterly Report on Form 10-Q.


Item 4.  Controls and Procedures

Evaluation of Disclosure Controls and Procedures

We acquired Uniwheels on May 30, 2017. Management is in the process of evaluating the internal controls in place at Uniwheels. Uniwheels constituted 19.5 percent of our total assets as of June 25, 2017, including the goodwill and intangible assets recorded as part of the purchase accounting. Uniwheels constituted 22.3 percent and 13.4 percent of our net sales for the three and six months ended June 25, 2017, respectively. SEC guidance allows companies to exclude acquisitions from their assessment of internal control over financial reporting during the first year of an acquisition while integrating the acquired company. Accordingly, we have excluded Uniwheels from our evaluation as of June 25, 2017

Based on this evaluation, our Chief Executive Officer and Chief Financial Officer concluded that, as of June 25, 2017 , our disclosure controls and procedures were effective.

Changes in Internal Control Over Financial Reporting
 
With the exception of the Uniwheels acquisition, there has been no change in our internal control over financial reporting during the fiscal quarter ended June 25, 2017 that has materially affected, or is reasonably likely to materially affect, our internal control over financial reporting.

The company's management, with the participation of the Chief Executive Officer and Chief Financial Officer, evaluated the effectiveness of the company's disclosure controls and procedures (as defined in Rules 13a-15(e) and 15d-15(e) under the Exchange Act) as of June 25, 2017 .  Our disclosure controls and procedures are designed to ensure that information required to be disclosed in reports we file or submit under the Exchange Act is recorded, processed, summarized and reported within the time periods specified in SEC rules and forms and that such information is accumulated and communicated to our management, including our Chief Executive Officer and Chief Financial Officer, to allow timely decisions regarding required disclosures.


38

Table of Contents

PART II
OTHER INFORMATION


Item 1.  Legal Proceedings

We are party to various legal and environmental proceedings incidental to our business.  Certain claims, suits and complaints arising in the ordinary course of business have been filed or are pending against us.  Based on facts now known, we believe all such matters are adequately provided for, covered by insurance, are without merit and/or involve such amounts that would not materially adversely affect our consolidated results of operations, cash flows or financial position.  


Item 1A.  Risk Factors

On May 30, 2017, Superior acquired 92.3 percent of the outstanding stock of Uniwheels, resulting in Uniwheels becoming a wholly-owned subsidiary of Superior.  In addition, on June 15, 2017, Superior issued the Notes.  As a result of the Acquisition and the related financing actions, the Company is restating its risk factors.  The following risk factors supersede the risk factors disclosed in Part I - Item 1A - “Risk Factors” in our Annual Report on Form 10-K for the year ended December 25, 2016.      

Risks Relating to Our Company

The automotive industry is cyclical and volatility in the automotive industry could adversely affect our financial performance.

The majority of our sales are made in European and domestic U.S. markets. Therefore, our financial performance depends largely on conditions in the European and U.S. automotive industry, which in turn can be affected significantly by broad economic and financial market conditions. Consumer demand for automobiles is subject to considerable volatility as a result of consumer confidence in general economic conditions, levels of employment, prevailing wages, fuel prices and the availability and cost of consumer credit. With steady improvement in the North American and European automotive industries since the global recession that began in 2008, vehicle production levels in 2016 reached the highest level in the last decade. However, there can be no guarantee that the improvements in recent years will be sustained or that reductions from current production levels will not occur in future periods. Demand for aluminum wheels can be further affected by other factors, including pricing and performance comparisons to competitive materials such as steel. Finally, the demand for our products is influenced by shifts of market share between vehicle manufacturers and the specific market penetration of individual vehicle platforms being sold by our customers.

A limited number of customers represent a large percentage of our sales. The loss of a significant customer or decrease in demand could adversely affect our operating results.

Ford, GM and Toyota, together, represented just less than half of our total consolidated combined sales in 2016. Our OEM customers are not required to purchase any minimum amount of products from us. Increasingly global procurement practices, the pace of new vehicle introduction and demand for price reductions may make it more difficult to maintain long-term supply arrangements with our customers, and there are no guarantees that we will be able to negotiate supply arrangements with our customers on terms acceptable to us in the future. The contracts we have entered into with most of our customers provide that we will manufacture wheels for a particular vehicle model, rather than manufacture a specific quantity of products. Such contracts range from one year to the life of the model (usually three to five years), typically are non-exclusive and do not require the purchase by the customer of any minimum number of wheels from us. Therefore, a significant decrease in consumer demand for certain key models or group of related models sold by any of our major customers, or a decision by a manufacturer not to purchase from us, or to discontinue purchasing from us, for a particular model or group of models, could adversely affect our results of operations and financial condition.

We operate in a highly competitive industry.

The automotive component supply industry is highly competitive, both domestically and internationally. Competition is based on a number of factors, including price, technology, quality, delivery and overall customer service and available capacity to meet customer demands. Some of our competitors are companies, or divisions or subsidiaries of companies, which are larger and have greater financial and other resources than we do. We cannot ensure that our products will be able to compete successfully with the products of these competitors. In particular, our ability to increase manufacturing capacity typically requires significant investments in facilities, equipment and personnel. Our operating facilities are at full or near to full capacity levels which may cause us to incur labor costs at premium rates in order to meet customer requirements, experience increased maintenance expenses

39

Table of Contents

or require us to replace our machinery and equipment on an accelerated basis. Furthermore, the nature of the markets in which we compete has attracted new entrants, particularly from low cost countries. As a result, our sales levels and margins continue to be adversely affected by pricing pressures reflective of significant competition from producers located in low-cost foreign markets, such as China. Such competition with lower cost structures poses a significant threat to our ability to compete internationally and domestically. These factors have led to our customers awarding business to foreign competitors in the past, and they may continue to do so in the future. In addition, any of our competitors may foresee the course of market development more accurately, develop products that are superior to our products, have the ability to produce similar products at a lower cost or adapt more quickly to new technologies or evolving customer requirements. Consequently, our products may not be able to compete successfully with competitors' products.

Production of certain car models may be relocated from Europe in part or in full which may reduce or stop entirely production of certain car models in Europe.

One of the company’s competitive strengths is Uniwheels’ proximity to assembly lines of its main OEM customers, which are premium and value car manufacturers. A significant portion of the company’s revenue is derived from customers located in Europe. Since the premium cars' sales dynamics are particularly cost-effective in developing regions, car manufacturers focus their efforts on those markets. It may be assumed that car manufacturers develop production of certain car models closer to the end customers to shorten the delivery time and decrease transportation costs. As a consequence, the car manufacturers may reduce or entirely halt production of certain car models in Europe. In such event, the wheels for these car models may become too expensive and the delivery time may take too long, and as a result, we may be unable to successfully compete with local wheel producers. If we lose some of our orders from Uniwheels’ OEM customers due to production relocation to other continents, we may be unable to compensate for any significant decline in sales by attracting new customers or increasing sales to the existing customers. This could also have a material adverse effect on the company’s assets, financial condition, results of operations or prospects.

We experience continual pressure to reduce costs.

The vehicle market is highly competitive at the OEM level, which drives continual cost-cutting initiatives by our customers. Customer concentration, relative supplier fragmentation and product commoditization have translated into continual pressure from OEMs to reduce the price of our products. It is possible that pricing pressures beyond our expectations could intensify as OEMs pursue restructuring and cost-cutting initiatives. If we are unable to generate sufficient production cost savings in the future to offset such price reductions, our gross margin, rate of profitability and cash flows could be adversely affected. In addition, changes in OEMs' purchasing policies or payment practices could have an adverse effect on our business. Our OEM customers typically attempt to qualify more than one wheel supplier for the programs we participate in and for programs we may bid on in the future. As such, our OEM customers are able to negotiate favorable pricing or may decrease sales volume. Such actions may result in decreased sales volumes and unit price reductions for our company, resulting in lower revenues, gross profit, operating income and cash flows.

We may be unable to successfully implement cost-saving measures or achieve expected benefits under our plans to improve operations.

As part of our ongoing focus to provide high quality products, we continually analyze our business to further improve our operations and identify cost-cutting measures. We may be unable to successfully identify or implement plans targeting these initiatives, or fail to realize the benefits of the plans we have already implemented, as a result of operational difficulties, a weakening of the economy or other factors. Cost reductions may not fully offset decreases in the prices of our products due to the time required to develop and implement cost reduction initiatives. Additional factors such as inconsistent customer ordering patterns, increasing product complexity and heightened quality standards are making it increasingly more difficult to reduce our costs. It is possible that as we incur costs to implement improvement strategies, the impact on our financial position, results of operations and cash flow may be negative.

Interruption in our production capabilities could result in increased freight costs or contract cancellations.

In the last six months of 2016, we experienced significant operating inefficiencies primarily in one of our manufacturing facilities. The inefficiencies stemmed from a variety of issues that reduced production rates. Contributing factors to the inefficiencies included an electricity outage and unanticipated equipment reliability issues which reduced finished goods and work-in-process inventories. We also experienced several new product launches and significant ramp-up in demand for newer products for which unusually high scrap rates were occurring. Lower than normal production yields coupled with the loss of inventory safety stock resulted in a series of expedited shipments to customers. The higher than normal costs included approximately $13 million in freight expediting costs and additional costs related to the production inefficiencies.


40

Table of Contents

An interruption in production capabilities at any of our facilities as a result of equipment failure, interruption of raw materials or other supplies, labor disputes or other reasons could result in our inability to produce our products, which would reduce our sales and operating results for the affected period and harm our customer relationships. We have, from time to time, undertaken significant re-tooling and modernization initiatives at our facilities, which in the past have caused, and in the future may cause, unexpected delays and plant underutilization, and such adverse consequences may continue to occur as we continue to modernize our production facilities. In addition, we generally deliver our products only after receiving the order from the customer and thus typically do not hold large inventories. In the event of a production interruption at any of our manufacturing facilities, even if only temporary, or if we experience delays as a result of events that are beyond our control, delivery times to our customers could be severely affected. Any significant delay in deliveries to our customers could lead to premium freight costs and other performance penalties, as well as contract cancellations, and cause us to lose future sales and expose us to other claims for damages. Our manufacturing facilities are also subject to the risk of catastrophic loss due to unanticipated events such as fires, earthquakes, explosions or violent weather conditions. We have in the past, and may in the future, experience plant shutdowns or periods of reduced production which could have a material adverse effect on our results of operations or financial condition.

Similarly, it also is possible that our customers may experience production delays or disruptions for a variety of reasons, which could include supply-chain disruption for parts other than wheels, equipment breakdowns or other events affecting vehicle assembly rates that impact us, work stoppages or slow-downs at factories where our products are consumed, or even catastrophic events such as fires, disruptive weather conditions or natural disasters. Such disruptions at the customer level may cause the affected customer to halt or limit the purchase of our products.

We may be unable to successfully launch new products and/or achieve technological advances.

In order to effectively compete in the automotive supply industry, we must be able to launch new products and adopt technology to meet our customers' demand in a timely manner. However, we cannot ensure that we will be able to install and certify the equipment needed for new product programs in time for the start of production, or that the transitioning of our manufacturing facilities and resources under new product programs will not impact production rates or other operational efficiency measures at our facilities. In addition, we cannot ensure that our customers will execute the launch of their new product programs on schedule. We are also subject to the risks generally associated with new product introductions and applications, including lack of market acceptance, delays in product development and failure of products to operate properly. Further, changes in competitive technologies may render certain of our products obsolete or less attractive. Our ability to anticipate changes in technology and to successfully develop and introduce new and enhanced products on a timely basis will be a significant factor in our ability to remain competitive. Our failure to successfully and timely launch new products or adopt new technologies, or a failure by our customers to successfully launch new programs, could adversely affect our results. We cannot ensure that we will be able to achieve the technological advances that may be necessary for us to remain competitive or that certain of our products will not become obsolete.

Our international operations and international trade agreements make us vulnerable to risks associated with doing business in foreign countries that can affect our business, financial condition and results of operations.

We manufacture a substantial portion of our products in Mexico, Germany and Poland, have a minor investment in a wheel manufacturing company in India and we sell our products internationally. Accordingly, unfavorable changes in foreign cost structures, trade protection laws, regulations and policies affecting trade and investments and social, political, labor or economic conditions in a specific country or region, among other factors, could have a negative effect on our business and results of operations. Legal and regulatory requirements differ among jurisdictions worldwide. Violations of these laws and regulations could result in fines, criminal sanctions, prohibitions on the conduct of our business and damage to our reputation. Although we have policies, controls and procedures designed to ensure compliance with these laws, our employees, contractors, or agents may violate our policies.

Changes in U.S. and EU social, political, regulatory and economic conditions or in laws and policies governing foreign trade, manufacturing, development and investment in the countries where we currently develop and sell products could adversely affect our business. A significant portion of our business activities are conducted in Mexico. New leadership in the U.S. federal government is not supportive of certain existing international trade agreements, including the North American Free Trade Agreement (“NAFTA”). If the U.S. withdraws from or materially modifies NAFTA or certain other international trade agreements, our business, financial condition and results of operations could be adversely affected. Proposals to institute a border adjustment of 20% for imports could have a negative impact on our operations.

Fluctuations in foreign currencies may adversely impact our financial condition.

Due to the growth of our operations outside of the U.S., we have experienced increased exposure to foreign currency gains and losses in the ordinary course of our business. As a result, fluctuations in the exchange rate between the U.S. dollar, the Mexican

41

Table of Contents

peso, the Euro, the Polish Zloty and any currencies of other countries in which we conduct our business may have a material impact on our financial condition, as cash flows generated in foreign currencies may be used, in part, to service our U.S. dollar-denominated liabilities, or vice versa.

Fluctuations in foreign currency exchange rates may also affect the value of our foreign assets as reported in U.S. dollars, and may adversely affect reported earnings and, accordingly, the comparability of period-to-period results of operations. Changes in currency exchange rates may affect the relative prices at which we and our foreign competitors sell products in the same market. In addition, changes in the value of the relevant currencies may affect the cost of certain items required in our operations. We cannot ensure that fluctuations in exchange rates will not otherwise have a material adverse effect on our financial condition or results of operations or cause significant fluctuations in quarterly and annual results of operations.

Our business requires us to settle transactions between currencies in both directions - i.e., peso to U.S. dollar, Euro to U.S. Dollar, Euro to Zloty and vice versa for all transactions. To the greatest extent possible, we attempt to match the timing of transaction settlements between currencies to create a “natural hedge.” Based on the current business model and levels of production and sales activity, the net imbalance between currencies depends on specific circumstances. While changes in the terms of the contracts with our customers will be creating an imbalance between currencies that we are hedging with foreign currency forward contracts, there can be no assurances that our hedging program will effectively offset the impact of the imbalance between currencies or that the net transaction balance will not change significantly in the future.

To manage this risk, we may enter into foreign currency forward and option contracts with financial institutions to protect against foreign exchange risks associated with certain existing assets and liabilities, certain firmly committed transactions and forecasted future cash flows. We have a program to hedge a portion of our material foreign exchange exposures, typically for up to 42 months. However, we may choose not to hedge certain foreign exchange exposures for a variety of reasons including, but not limited to, accounting considerations and the prohibitive economic cost of hedging particular exposures. There is no guarantee that our hedge program will effectively mitigate our exposures to foreign exchange changes which could have material adverse effects on our cash flows and results of operations.

Our substantial indebtedness could adversely affect our financial condition

We have a significant amount of new indebtedness. As of June 25, 2017, our total debt was $739.9 million, which excludes amortization of deferred financing of $25.1 million, and we would have availability of $129.6 million under the Senior Secured Credit Facilities. The interest expense on the significant amount of new indebtedness will be significantly higher than historical interest expense and could adversely affect our financial condition.

Subject to the limits contained in the Credit Agreement governing the Senior Secured Credit Facilities and the indenture governing the Notes (the “Indenture”) and our other debt instruments, we may be able to incur substantial additional debt from time to time to finance working capital, capital expenditures, investments or acquisitions, or for other purposes. If we do so, the risks related to our high level of debt could intensify.

In addition, the Indenture and the Credit Agreement governing the Senior Secured Credit Facilities contain restrictive covenants that will limit our ability to engage in activities that may be in our long-term best interest. Our failure to comply with those covenants could result in an event of default which, if not cured or waived, could result in the acceleration of all our debt.

We may not be able to generate sufficient cash to service all of our indebtedness, including the Notes, and may be forced to take other actions to satisfy our obligations under our indebtedness, which may not be successful.

Our ability to make scheduled payments or to refinance our debt obligations depends on our financial and operating performance, which is subject to prevailing economic, industry and competitive conditions and to certain financial, business, economic and other factors beyond our control. We may not be able to maintain a sufficient level of cash flow from operating activities to permit us to pay the principal, premium, if any, and interest on the Notes and our other indebtedness.

If our cash flows and capital resources are insufficient to fund our debt service obligations, we may be forced to reduce or delay capital expenditures, sell assets, seek additional capital or seek to restructure or refinance our indebtedness, including the Notes. Our ability to restructure or refinance our debt will depend on the condition of the capital and credit markets and our financial condition at such time. Any refinancing of our debt could be at higher interest rates and may require us to comply with more onerous covenants, which could further restrict our business operations and limit our financial flexibility. In addition, any failure to make payments of interest and principal on our outstanding indebtedness on a timely basis would likely result in a reduction of our credit rating, which could harm our ability to incur additional indebtedness. These alternative measures may not be successful and may not permit us to meet our scheduled debt service obligations. In the absence of such cash flows and resources, we could

42

Table of Contents

face substantial liquidity problems and might be required to sell material assets or operations to attempt to meet our debt service and other obligations. The Credit Agreement governing the Senior Secured Credit Facilities and the Indenture will restrict our ability to conduct asset sales and/or use the proceeds from asset sales. We may not be able to consummate these asset sales to raise capital or sell assets at prices and on terms that we believe are fair and any proceeds that we do receive may not be adequate to meet any debt service obligations then due. For more information on the Indenture, see our Form 8-K filed with the SEC on June 20, 2017. If we cannot meet our debt service obligations, the holders of our debt may accelerate our debt and, to the extent such debt is secured, foreclose on our assets. In such an event, we may not have sufficient assets to repay all of our debt.

The terms of the Credit Agreement governing the Senior Secured Credit Facilities and the Indenture will, and the documents governing other debt that we may incur in the future may, restrict our current and future operations, particularly our ability to respond to changes or to take certain actions.

The Indenture and the Credit Agreement governing the Senior Secured Credit Facilities, and the documents governing other debt that we may incur in the future may, contain a number of restrictive covenants that impose significant operating and financial restrictions on us and may limit our ability to engage in acts that may be in our long-term best interests, including restrictions on our ability to:

incur additional indebtedness and guarantee indebtedness;

create or incur liens;

engage in mergers or consolidations or sell all or substantially all of our assets;

sell, transfer or otherwise dispose of assets;

make investments, acquisitions, loans or advances or other restricted payments;

pay dividends or distributions, repurchase our capital stock or make certain other restricted payments;

prepay, redeem, or repurchase any subordinated indebtedness;

designate our subsidiaries as unrestricted subsidiaries;

enter into agreements which limit the ability of our non-Guarantor subsidiaries to pay dividends or make other payments to us; and

enter into certain transactions with our affiliates.

You should refer to our Form 8-K filed with the SEC on June 20, 2017 and the Indenture filed as Exhibit 4.1 thereto for further information about these covenants.

In addition, the restrictive covenants in the Credit Agreement governing the Senior Secured Credit Facilities require us to maintain specified financial ratios and satisfy other financial condition tests to the extent subject to certain financial covenant conditions. Our ability to meet those financial ratios and tests can be affected by events beyond our control. We may not meet those ratios and tests.

A breach of the covenants or restrictions under the Indenture governing the Notes or under the Credit Agreement governing the Senior Secured Credit Facilities could result in an event of default under the applicable indebtedness. Such a default may allow the creditors under such facility to accelerate the related debt, which may result in the acceleration of any other debt to which a cross-acceleration or cross-default provision applies. In addition, an event of default under the Credit Agreement governing our Senior Secured Credit Facilities would permit the lenders under our revolving credit facility to terminate all commitments to extend further credit under that facility. Furthermore, if we were unable to repay the amounts due and payable under the Senior Secured Credit Facilities, those lenders could proceed against the collateral granted to them to secure that indebtedness. We have pledged substantially all of our assets as collateral under the Senior Secured Credit Facilities. In the event our lenders or holders of the Notes accelerate the repayment of our borrowings, we may not have sufficient assets to repay that indebtedness or be able to borrow sufficient funds to refinance it. Even if we are able to obtain new financing, it may not be on commercially reasonable terms or on terms acceptable to us. As a result of these restrictions, we may be:

limited in how we conduct our business;

43

Table of Contents


unable to raise additional debt or equity financing to operate during general economic or business downturns; or

unable to compete effectively or to take advantage of new business opportunities. These restrictions, along with restrictions that may be contained in agreements evidencing or governing other future indebtedness, may affect our ability to grow or pursue other important initiatives in accordance with our growth.

Our variable rate indebtedness subjects us to interest rate risk, which could cause our debt service obligations to increase significantly.

Borrowings under our Senior Secured Credit Facilities will be at variable rates of interest and expose us to interest rate risk. If interest rates increase, our debt service obligations on the variable rate indebtedness could increase even though the amount borrowed remains the same, and our net income and cash flows, including cash available for servicing our indebtedness, would correspondingly decrease. As of June 25, 2017, approximately $416.4 million of our debt would have been variable rate debt. Our anticipated variable rate debt annual interest expense on $416.4 million at the current rate of 4.85 percent would be $20.2 million. In the future, we may enter into interest rate swaps that involve the exchange of floating for fixed rate interest payments in order to reduce interest rate volatility. However, we may not maintain interest rate swaps with respect to all of our variable rate indebtedness, and any swaps we enter into may not fully mitigate our interest rate risk.

Changes in market interest rates could affect our financial position and financial performance.

Changes in market interest rates have an impact on future interest payments on floating rate liabilities and could therefore affect the financial position and financial performance of the company. The interest risk at Uniwheels arises primarily from its long-term debt arrangements. Currently, the interest on mid-term borrowings is fixed for a period for three months. The related floating rate loans have been hedged by means of derivatives.

Increases in the costs and restrictions on availability of raw materials could adversely affect our operating margins and cash flow.

Generally, we obtain our raw materials, supplies and energy requirements from various sources. Although we currently maintain alternative sources, our business is subject to the risk of price increases and periodic delays in delivery. Fluctuations in the prices of raw materials may be driven by the supply/demand relationship for that commodity or governmental regulation. In addition, if any of our suppliers seek bankruptcy relief or otherwise cannot continue their business as anticipated, the availability or price of raw materials could be adversely affected.

Although we are able to periodically pass certain aluminum cost increases on to our customers, we may not be able to pass along all changes in aluminum costs, or there may be a delay in passing the aluminum costs onto our customers. Our customers are not obligated to accept energy or other supply cost increases that we may attempt to pass along to them. This inability to pass on these cost increases to our customers could adversely affect our operating margins and cash flow, possibly resulting in lower operating income and profitability.

Aluminum and alloy pricing may have a material effect on our operating margins and results of operations.

The cost of aluminum is a significant component in the overall cost of a wheel and in our selling prices to OEM customers. The price for aluminum we purchase is adjusted monthly based primarily on changes in certain published market indices, but the timing of such adjustments is based on specific customer agreements and can vary from monthly to quarterly. As a result, the timing of aluminum price adjustments flowing through sales rarely will match the timing of such changes in cost and can result in fluctuations to our gross profit. This is especially true during periods of frequent increases or decreases in the market price of aluminum.

The aluminum we use to manufacture wheels also contains additional alloying materials, including silicon. The cost of alloying materials also is a component of the overall cost of a wheel. The price of the alloys we purchase is also based on certain published market indices; however, most of our customer agreements do not provide price adjustments for changes in market prices of alloying materials. Increases or decreases in the market prices of these alloying materials could have a material effect on our operating margins and results of operations.


44

Table of Contents

There is a risk of discontinuation of anti-dumping duty from China which may increase the competitive pressure from Chinese producers primarily in the aftermarket.

In 2010, the European Commission imposed provisional anti-dumping duties of 22.3 percent on imports of aluminum road wheels from China after a complaint of unfair competition from European manufacturers. The European Commission argued that the EU manufacturers had suffered a significant decrease in production and sales, and a loss of market share, as well as price depression due to cheaper imports from China. On January 23, 2017, the European Commission decided to maintain the anti-dumping duties (Commission Implementing Regulation (EU) 2017/109) for another five year period. The anti-dumping duties protect the EU producers until January 24, 2022. After this date, the competitive pressures from Chinese producers, which have cost advantages, primarily in the aftermarket, may adversely affect the company’s assets, financial condition and results of operations or prospects.

We are subject to various environmental laws.

We incur significant costs to comply with applicable environmental, health and safety laws and regulations in the ordinary course of our business. We cannot ensure that we have been or will be at all times in complete compliance with such laws and regulations. Failure to be in compliance with such laws and regulations could result in material fines or sanctions. Additionally, changes to such laws or regulations may have a significant impact on our cash flows, financial condition and results of operations.

We are also subject to various foreign, federal, state and local environmental laws, ordinances and regulations, including those governing discharges into the air and water, the storage, handling and disposal of solid and hazardous wastes, the remediation of soil and groundwater contaminated by hazardous substances or wastes and the health and safety of our employees. The nature of our current and former operations and the history of industrial uses at some of our facilities expose us to the risk of liabilities or claims with respect to environmental and worker health and safety matters which could have a material adverse effect on our financial health. In addition, some of our properties are subject to indemnification and/or cleanup obligations of third parties with respect to environmental matters. However, in the event of the insolvency or bankruptcy of such third parties, we could be required to bear the liabilities that would otherwise be the responsibility of such third parties.

Further, changes in legislation or regulation imposing reporting obligations on, or limiting emissions of greenhouse gases from, or otherwise impacting or limiting our equipment and operations or from the vehicles that use our products could adversely affect demand for those vehicles or require us to incur costs to become compliant with such regulations.

We are from time to time subject to litigation, which could adversely impact our financial condition or results of operations.

The nature of our business exposes us to litigation in the ordinary course of our business. We are exposed to potential product liability and warranty risks that are inherent in the design, manufacture and sale of automotive products, the failure of which could result in property damage, personal injury or death. Accordingly, individual or class action suits alleging product liability or warranty claims could result. Although we currently maintain what we believe to be suitable and adequate product liability insurance in excess of our self-insured amounts, we cannot assure you that we will be able to maintain such insurance on acceptable terms or that such insurance will provide adequate protection against potential liabilities. In addition, if any of our products prove to be defective, we may be required to participate in a recall. A successful claim brought against us in excess of available insurance coverage, if any, or a requirement to participate in any product recall, could have a material adverse effect on our results of operations or financial condition. We cannot give assurance that any current or future claims will not adversely affect our cash flows, financial condition or results of operations.

Our business involves extensive product development activities leading to the creation of new products. In the case of new products, there is a risk that wheels under development may not be ready by the start of production ("SOP") and/or may fail to meet the customer’s specifications. In any such case, warranty or compensation claims might be raised, or litigation might be commenced, against the company. Moreover, the company could lose its reputation of an entrepreneur actively developing new and innovative solutions, which in turn could affect the volume of orders, particularly orders for new designs.

Moreover, there are risks related to civil liability under supply contracts (civil liability clauses in contracts with customers, contractual risks related to civil liability for causing delay in production launch, etc.). If we fail to ensure production launch as and when required by the customer, thus jeopardizing production processes at the customer’s facilities, this could lead to increased costs, giving rise to recourse claims against, or causing loss of orders by the company. This could also have an adverse effect on our assets, financial condition, results of operations or prospects.

45

Table of Contents

We may be unable to attract and retain key personnel.

Our success depends, in part, on our ability to attract, hire, train and retain qualified managerial, engineering, sales and marketing personnel. We face significant competition for these types of employees in our industry. We may be unsuccessful in attracting and retaining the personnel we require to conduct our operations successfully. In addition, key personnel may leave us and compete against us. Our success also depends to a significant extent on the continued service of our senior management team. We may be unsuccessful in replacing key managers who either resign or retire. The loss of any member of our senior management team or other experienced senior employees could impair our ability to execute our business plans and strategic initiatives, cause us to lose customers and experience reduced net sales, or lead to employee morale problems and/or the loss of other key employees. In any such event, our financial condition, results of operations, internal control over financial reporting or cash flows could be adversely affected.

Furthermore, in order to remain competitive and retain Uniwheels employees, the company may be forced to increase its labor costs at a faster pace than it used to do in the past. Labor costs represent a considerable part of the cost of Uniwheels’ products. Though the workforce is cheaper in Poland than in old EU member states, where Uniwheels has its core production capacities, the difference should decrease over time as the Polish economy is catching up with the average of the EU.

If the company fails to attract an adequate number of qualified employees and to retain such employees at salaries prevailing in the industry and increase labor efficiency and effectiveness (particularly with respect to Uniwheels’ manufacturing and production in Poland and Germany), this may have a material adverse effect on the company’s assets, financial condition, results of operations or prospects.

We must meet retirement benefit obligations of Uniwheels, which could have an adverse effect on our liquidity.

Uniwheels has retirement benefit obligations resulting from mandatory provisions of law from collective bargaining agreements and from individual pension promises. Provisions for retirement benefits are calculated with reference to specific actuarial assumptions, including discount factors, life expectancy and the expected salary-to-pension adjustment. Should the actual results of such calculations differ from the assumptions, especially as regards discount rates, the amount of the effective obligation may increase, reducing our profit. This could have an adverse effect on our assets, financial condition, results of operations or prospects.

We may be unable to maintain effective internal control over financial reporting.

Management is responsible for establishing and maintaining adequate internal control over financial reporting. Many of our key controls rely on maintaining personnel with an appropriate level of accounting knowledge, experience and training in the application of U.S. GAAP in order to operate effectively. Material weaknesses or deficiencies may cause our financial statements to contain material misstatements, unintentional errors or omissions and late filings with regulatory agencies may occur.

Our share repurchase program may limit our flexibility to pursue other initiatives.

Although our existing cash and funds available under our Senior Secured Credit Facilities are currently adequate to fund our approved common stock repurchase plan, dedication of our financial resources to the repurchase of outstanding shares will reduce our liquidity and working capital, which in turn may limit our flexibility to pursue other initiatives to grow our business or to return capital to our shareholders through other means. After making such expenditures, a significant change in our business or the economy, or an unexpected decrease in our cash flow for any reason could result in the need for additional outside financing.

A disruption in our information technology systems, including a disruption related to cybersecurity, could adversely affect our financial performance.

A cyber-attack that bypasses our information technology ("IT") security systems causing an IT security breach may lead to a material disruption of our IT business systems and/or the loss of business information resulting in adverse consequences to our business, including: an adverse impact on our operations due to the theft, destruction, loss, misappropriation or release of confidential data or intellectual property, operational or business delays resulting from the disruption of IT systems and subsequent clean-up and mitigation activities, an inability to timely prepare and file our financial reports with the SEC and negative publicity resulting in reputation or brand damage with our customers, partners or industry peers.


46

Table of Contents

Competitors could copy our products or technologies and we could violate protected intellectual property rights or trade secrets of its competitors or other third parties.

We register business-related intellectual property rights, such as industrial designs and trademarks, hold licenses and other agreements covering the use of intellectual property rights, and have taken steps to ensure that its trade secrets and technological know-how remain confidential. Nevertheless, there is a risk that third parties would attempt to copy, in full or in part, our products, technologies or industrial designs, or to obtain unauthorized access and use its company secrets, technological know-how or other protected intellectual property rights. Also, competitors could successfully develop technologies, products or industrial designs similar to, and thus potentially compete with, us.

Further, there can be no assurance that we will not unknowingly infringe intellectual property rights of our competitors, such as patents and industrial designs, especially due to the fact that the interpretations of what constitutes protected intellectual property may differ. Similarly, there is a risk that we will illegitimately use intellectual property developed by our employees, which is subject in each case to relevant regulations governing employee-created innovations. If a dispute concerning intellectual property rights arises, in which the relevant court issues an opinion on the disputed intellectual property rights contrary to us, identifying a breach of intellectual property rights, we may be required to pay substantial damages or to stop the use of such intellectual property. In addition, we are exposed to the risk of injunctions being imposed to prevent further infringement, leading to a decrease in the number of orders.

All these events could have a material adverse effect on our assets, financial condition, results of operations or prospects.

We may be unable to successfully achieve expected benefits from our joint ventures or acquisitions.

As we continue to expand globally, we have engaged, and may continue to engage, in joint ventures and we may pursue acquisitions that involve potential risks, including failure to successfully integrate and realize the expected benefits of such joint ventures or acquisitions. Integrating acquired operations is a significant challenge, and there is no assurance that we will be able to manage the integrations successfully. Failure to successfully integrate operations or to realize the expected benefits of such joint ventures or acquisitions may have an adverse impact on our results of operations and financial condition.

Our financial statements are subject to changes in accounting standards that could adversely impact our profitability or financial position.

Our consolidated financial statements are subject to the application of U.S. GAAP, which are periodically revised and/or expanded. Accordingly, from time to time, we are required to adopt new or revised accounting standards issued by recognized authoritative bodies, including the FASB. Recently, accounting standard setters issued new guidance which further interprets or seeks to revise accounting pronouncements related to revenue recognition and lease accounting as well as to issue new standards expanding disclosures. The impact of accounting pronouncements that have been issued but not yet implemented is disclosed in our annual and quarterly reports on Form 10-K and Form 10-Q. An assessment of proposed standards is not provided, as such proposals are subject to change through the exposure process and, therefore, their effects on our consolidated financial statements cannot be meaningfully assessed. It is possible that future accounting standards we are required to adopt could change the current accounting treatment that we apply to our consolidated financial statements and that such changes could have a material adverse effect on our reported results of operations and financial position.

Unanticipated changes in our effective tax rate, the adoption of new tax legislation or exposure to additional income tax liabilities could adversely affect our profitability.

We are subject to income taxes in the U.S., Mexico, Germany, Poland and other international jurisdictions. Our income tax provision and cash tax liability in the future could be adversely affected by changes in the distribution of earnings in countries with differing statutory tax rates, changes in the valuation of deferred tax assets and liabilities, changes in tax laws and the discovery of new information in the course of our tax return preparation process. We are also subject to ongoing tax audits. These audits can involve complex issues, which may require an extended period of time to resolve and can be highly judgmental. Tax authorities may disagree with certain tax reporting positions taken by us and, as a result, assess additional taxes against us. We regularly assess the likely outcomes of these audits in order to determine the appropriateness of our tax provision.

We may be exposed to tax risks regarding the elimination of tax loss carry-forwards in connection with changes of Uniwheels’ shareholder structure.

As of June 25, 2017, Uniwheels, as head of the German tax group ( Organschaft ), had substantial tax loss carry-forwards.


47

Table of Contents

As a matter of principle, if more than 50% of the shares or voting rights in Uniwheels are directly or indirectly transferred to one purchaser (or a group of related purchasers or purchasers with aligned interests) or a similar transfer occurs within a five year period, all existing tax loss carry-forwards and current year’s tax losses are canceled and may not be used anymore to offset taxable income. There are exceptions from these tax loss cancellation rules for certain intragroup share transfers, if and to the extent the entity’s transferred business assets contain built-in gains subject to taxation in Germany, as well as if and to the extent continuation bound loss carry-forwards apply. These tax cancellation rules may be subject to changes with retrospective effect and/or future changes, in particular, as a consequence of a recent decision by the German Federal Constitutional Court ( Bundesverfassungsgericht - BverfG ).

Since the 50% threshold is met by the Acquisition, the tax loss carry-forwards may be utilized in the future only in the amount of the value of the relevant built-in gains. In case of entering into a DPLTA between Acquisition Sub and Uniwheels, a new German tax group ( Organschaft ) will be established which cannot use the tax loss carry-forwards of the existing Uniwheels tax group. In case of an upstream merger of Uniwheels into Acquisition Sub, we will lose all tax loss carry-forwards in any event. This might have a material adverse effect on our assets, financial condition, results of operation or prospects.

We may fail to comply with conditions of the state tax incentive programs in Poland.

We have three production plants in a special economic zone, Tanobrzeska Specjalna Strefa Ekonomiczna Euro-Park Wislosan in Stalowa Wola, Poland. Uniwheels was granted seven permits to operate in such special economic zone, which allows us to benefit from Polish state tax incentives. The permits require certain conditions to be met, which include increasing the number of employees, keeping the number of employees at such level and incurring respective capital expenditures. In addition, particular permits indicate deadlines for completion of respective stages of investments. For three of the seven permits, conditions have already been fulfilled. As of June 25, 2017, Uniwheels recognized substantial deferred tax assets based on expected taxable results over a four-year planning horizon. The tax subsidies are limited to 2017 (for three permits) and 2026 (for four permits). If we do not fulfill the conditions required by the permits, the permits might be withdrawn and we would no longer benefit from state tax incentives, which may impact our assets, financial condition, results of operations or prospects in a material way. Furthermore, under current Polish regulations, special economic zones are scheduled to cease to exist in 2026.

We are currently unable to fully deduct interest charges on Uniwheels’ indebtedness.

The interest deduction barrier ( Zinsschranke ) limits the tax deductibility of interest expenses for a German business. If no exception to the interest deduction barrier applies, the net interest expense (interest expense less interest income) is deductible up to 30% of the taxable EBITDA ( verrechenbares EBITDA ) taxable in Germany in a given financial year. For these purposes, all businesses of a German tax group ( Organschaft ) are treated as one single business. Non-deductible interest expenses can be carried forward. Interest carry-forwards are subject to the same tax cancellation rules as tax loss carry-forwards (please see “We may be exposed to tax risks regarding the elimination of tax loss carry-forwards in connection with changes of Uniwheels’ shareholder structure”). Whenever interest expenses are not deductible or if an interest carry-forward is lost, the tax burden in future assessment periods could rise, which might have alone, or in combination, a material adverse effect on our assets, financial condition, results of operation or prospects.

We may be exposed to risks related to existing and future profit and loss transfer agreements executed with German subsidiaries of Uniwheels.

Uniwheels has concluded profit and loss transfer agreements with each of its German group entities. Accordingly, these subsidiaries are required to transfer all “profits” of the year to Uniwheels, and Uniwheels is required to compensate their losses to the extent such losses are not balanced by a permitted release of retained earnings. Uniwheels has compensated considerable losses generated by its German subsidiaries in the past and expects to continue to do so in the future. Future compensation of losses generated by its subsidiaries could have a material adverse effect on our assets, financial condition and results of operation.

Furthermore, profit and loss transfer agreements are one of the pre-requisites of the taxation of Uniwheels and its German subsidiaries as a German tax group. For tax purposes, a profit and loss transfer agreement must have a contract term for a minimum of five years. In addition, such agreement must be fully executed. If a profit and loss transfer agreement or its actual execution does not meet the prerequisites for the taxation as a German tax group, Uniwheels and each subsidiary are taxed on their own income (and under certain circumstances even with retrospective effect). Additionally, 5% of dividends from the subsidiary to Uniwheels would be regarded as non-deductible expenses at the Uniwheels level. Furthermore, the compensation of a loss of a subsidiary would be regarded as contribution by Uniwheels into the subsidiary and thus, would not directly reduce Uniwheels’ profits. As a consequence, if the profit and loss transfer agreements do not meet the prerequisites of a German tax group, this could have a material adverse effect on our assets, financial condition, results of operations or prospects.


48

Table of Contents

We may not have the ability to use cash to settle the principal amount of the Notes upon redemption or to repurchase the Notes upon a fundamental change, which could adversely affect our financial condition.
 
The Notes are redeemable any time on or after June 15, 2020 at a redemption price set forth in the Indenture. In addition, the company may redeem some or all of the Notes prior to June 15, 2020 at a price equal to 100.0% of the principal amount thereof plus a “make-whole” premium and accrued and unpaid interest, if any, to, but not including, the redemption date. Prior to June 15, 2020, the company may redeem up to 40% of the aggregate principal amount of the Notes using the proceeds of certain equity offerings at the redemption price set forth in the Indenture. If the company experiences a change of control or sells certain assets, the company may be required to offer to purchase the Notes from holders. If we do not have adequate cash available or cannot obtain additional financing, or our use of cash is restricted by applicable law, regulations or agreements governing our current or future indebtedness, we may not be able to repurchase the Notes when required under the Indenture, which would constitute an event of default under the Indenture. An event of default under the Indenture could also lead to a default under other agreements governing our current and future indebtedness, and if the repayment of such other indebtedness were accelerated, we may not have sufficient funds to repay the indebtedness and repurchase the Notes or make cash payments upon conversion of the Notes.

The terms of the Notes could delay or prevent an attempt to take over our company.

The terms of the Notes require us to repurchase the Notes in the event of a fundamental change. A takeover of our company would constitute a fundamental change. This could have the effect of delaying or preventing a takeover of our company that may otherwise be beneficial to our stockholders.

Risks related to the acquisition

Failure to successfully integrate the Uniwheels business, and the additional indebtedness incurred to finance the Acquisition, could adversely impact our stock price and future business and results of operations.

The integration of the Uniwheels business into our operations will be a complex and time-consuming process that may not be successful. The company has a limited history of integrating a significant acquisition into its business and the process of integration may produce unforeseen operating difficulties and expenditures for management. The primary areas of focus for successfully combining the business of Uniwheels with our operations may include, among others: retaining and integrating management and other key employees; realizing overall improvement in the design, engineering, start-up and production of wheel programs; aligning customer interface across the combined business; integrating information, communications and other systems; and managing the growth of the combined company.

Even if we successfully integrate the business of Uniwheels into our operations, there can be no assurance that we will realize the anticipated benefits. We are seeking to acquire Uniwheels with the expectation that the Acquisition will result in various benefits for the combined company including, among others, business growth opportunities and both operational and administrative synergies. Increased competition and/or deterioration in business conditions may limit our ability to expand this business. As such, we may not be able to realize the synergies, goodwill, business opportunities and growth prospects anticipated in connection with the Acquisition.

We are expected to incur substantial expenses related to the integration of Uniwheels.

There are a large number of processes, policies, procedures, operations, technologies and systems that must be integrated, including purchasing, accounting and finance, sales, billing, payroll, manufacturing, marketing and employee benefits. While we expect to incur integration and restructuring costs and other costs incurred to execute the transaction following completion of the Acquisition that currently are estimated to range between $[6.0] million and $[8.0] million, many of the expenses that will be incurred, especially with respect to manufacturing operations are, by their nature, difficult to estimate accurately. These expenses could, particularly in the near term, exceed the savings that we expect to achieve from elimination of duplicative expenses and the realization of economies of scale and cost savings. Although we expect that the realization of efficiencies related to the integration of the businesses will offset incremental transaction, Acquisition-related and restructuring costs over time, we cannot give any assurance that this net benefit will be achieved in the near term, or at all.

The Acquisition could have an adverse effect on our business, financial condition, results of operations or business prospects.

The Acquisition could disrupt our businesses in the following ways, among others:

the attention of management may be directed towards the completion of the Acquisition and other transaction-related considerations and may be diverted from the day-to-day business operations of Superior and/or Uniwheels, as applicable,

49

Table of Contents

and matters related to the Acquisition may require commitments of time and resources that could otherwise have been devoted to other opportunities that might have been beneficial to us, as applicable;

our employees may experience uncertainty regarding their future roles in the combined company, which might adversely affect our ability to retain, recruit and motivate key personnel; and

customers, suppliers and other third parties with business relationships with Superior and/or Uniwheels may decide not to renew or may decide to seek to terminate, change and/or renegotiate their relationships with Superior and/or Uniwheels as a result of the Acquisition, whether pursuant to the terms of their existing agreements with Superior and/or Uniwheels or otherwise.

Any of these matters could adversely affect our business, harm our financial condition, results of operations or business prospects.


Item 2 . Unregistered Sales of Equity Securities and Use of Proceeds

Not Applicable


50

Table of Contents


Item 6.  Exhibits

3.1

Certificate of Designations, Preferences and Rights of Series A Perpetual Convertible Preferred Stock and Series B Perpetual Preferred Stock of Superior Industries International, Inc. (incorporated by reference to Exhibit 3.1 to the Registrant's Form 8-K filed on May 26, 2017).
4.1

Indenture, dated as of June 15, 2017, among Superior Industries International, Inc., the subsidiaries of Superior identified therein, The Bank of New York Mellon SA/NV, Luxembourg Branch, as registrar and transfer agent and The Bank of New York Mellon acting through its London Branch, as Trustee (incorporated by reference to Exhibit 4.1 to the Registrant's Form 8-K filed on June 20, 2017).
10.1

Offer Letter of Employment, dated April 18, 2017, between Superior Industries International Inc. and Nadeem Moiz (filed herewith). *
10.2

Investor Rights Agreement, dated as of May 22, 2017, by and between Superior Industries International, Inc. and TPG Growth III Sidewall, L.P. (incorporated by reference to Exhibit 10.1 to the Registrant's Form 8-K filed on May 26, 2017).
10.3

First Amendment to Credit Agreement, dated May 23, 2017, among Superior Industries International, Inc., the Subsidiaries of Superior identified therein, Citibank, N.A. as Administrative Agent, and the Lenders party thereto (incorporated by reference to Exhibit 10.1 to the Registrant's Form 8-K filed on June 20, 2017).
10.4

Second Amendment to Credit Agreement, dated May 31, 2017, among Superior Industries International, Inc., the Subsidiaries of Superior identified therein, Citibank, N.A. as Administrative Agent, and the Lenders party thereto (incorporated by reference to Exhibit 10.2 to the Registrant's Form 8-K filed on June 20, 2017).
10.5

Third Amendment to Credit Agreement, dated June 15, 2017, among Superior Industries International, Inc., the Subsidiaries of Superior identified therein, Citibank, N.A. as Administrative Agent, and the Lenders party thereto (incorporated by reference to Exhibit 10.3 to the Registrant's Form 8-K filed on June 20, 2017).
10.6

Separation Agreement, dated June 30, 2017, between Superior Industries International, Inc. and Kerry Shiba (incorporated by reference to Exhibit 10.1 to the Registrant's Form 8-K filed on June 30, 2017). *
31.1

Certification of Donald J. Stebbins, Chief Executive Officer and President, Pursuant to Exchange Act Rules 13a-14(a) and 15d-14(a), as Adopted Pursuant to Section 302(a) of the Sarbanes-Oxley Act of 2002 (filed herewith).
31.2

Certification of Nadeem Moiz, Executive Vice President and Chief Financial Officer, Pursuant to Exchange Act Rules 13a-14(a) and 15d-14(a), as Adopted Pursuant to Section 302(a) of the Sarbanes-Oxley Act of 2002 (filed herewith).
32.1

Certification of Donald J. Stebbins, Chief Executive Officer and President, and Nadeem Moiz, Executive Vice President and Chief Financial Officer, Pursuant to 18 U.S.C. Section 1350, as Adopted Pursuant to Section 906 of the Sarbanes-Oxley Act of 2002 (furnished herewith).
101

Interactive data file (furnished electronically herewith pursuant to Rule 406T of Regulation S-T).

* Indicates management contract or compensatory plan or arrangement.

51

Table of Contents

SIGNATURES

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.


SUPERIOR INDUSTRIES INTERNATIONAL, INC.
(Registrant)

Date:
August 4, 2017
 
/s/ Donald J. Stebbins
 
 
 
 
Donald J. Stebbins
Chief Executive Officer and President
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Date:
August 4, 2017
 
/s/ Nadeem Moiz
 
 
 
 
Nadeem Moiz
Executive Vice President and Chief Financial Officer
 

52


 


 


EXHIBIT 31.1
CERTIFICATION
PURSUANT TO EXCHANGE ACT RULES 13a-14(a) AND 15d-14(a),
AS ADOPTED PURSUANT TO
SECTION 302(a) OF THE SARBANES-OXLEY ACT OF 2002

I, Donald J. Stebbins, certify that:

1
 
I have reviewed this Quarterly Report on Form 10-Q of Superior Industries International, Inc.;
 
 
 
2
 
Based on my knowledge, this report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this report;
 
 
 
3
 
Based on my knowledge, the financial statements, and other financial information included in this report, fairly present in all material respects the financial condition, results of operations and cash flows of the registrant as of, and for, the periods presented in this report;
 
 
 
4
 
The registrant's other certifying officer and I are responsible for establishing and maintaining disclosure controls and procedures (as defined in Exchange Act Rules 13a-15(e) and 15d-15(e)) and internal control over financial reporting (as defined in Exchange Act Rules 13a-15(f) and 15d-15(f)) for the registrant and have:

 
a)
 
Designed such disclosure controls and procedures, or caused such disclosure controls and procedures to be designed under our supervision, to ensure that material information relating to the registrant, including its consolidated subsidiaries, is made known to us by others within those entities, particularly during the period in which this report is being prepared;
 
 
 
 
 
b)
 
Designed such internal control over financial reporting, or caused such internal control over financial reporting to be designed under our supervision, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles;
 
 
 
 
 
c)
 
Evaluated the effectiveness of the registrant's disclosure controls and procedures and presented in this report our conclusions about the effectiveness of the disclosure controls and procedures, as of the end of the period covered by the report based on such evaluation; and
 
 
 
 
 
d)
 
Disclosed in this report any change in the registrant's internal control over financial reporting that occurred during the registrant's most recent fiscal quarter (the registrant's fourth fiscal quarter in the case of an annual report) that has materially affected, or is reasonably likely to materially affect, the registrant's internal control over financial reporting; and

5
 
The registrant's other certifying officer and I have disclosed, based on our most recent evaluation of internal control over financial reporting, to the registrant's auditors and the audit committee of the registrant's board of directors (or persons performing the equivalent functions):

 
a)
 
All significant deficiencies and material weaknesses in the design or operation of internal control over financial reporting which are reasonably likely to adversely affect the registrant's ability to record, process, summarize and report financial information; and
 
 
 
 
 
b)
 
Any fraud, whether or not material, that involves management or other employees who have a significant role in the registrant's internal control over financial reporting.
 
 
 
 
 
 
 
 
Date:
August 4, 2017
 
/s/ Donald J. Stebbins
 
 
 
Donald J. Stebbins
Chief Executive Officer and President
 
 
 
 




EXHIBIT 31.2
CERTIFICATION
PURSUANT TO EXCHANGE ACT RULES 13a-14(a) AND 15d-14(a),
AS ADOPTED PURSUANT TO
SECTION 302(a) OF THE SARBANES-OXLEY ACT OF 2002

I, Nadeem Moiz, certify that:

1
 
I have reviewed this Quarterly Report on Form 10-Q of Superior Industries International, Inc.;
 
 
 
2
 
Based on my knowledge, this report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this report;
 
 
 
3
 
Based on my knowledge, the financial statements, and other financial information included in this report, fairly present in all material respects the financial condition, results of operations and cash flows of the registrant as of, and for, the periods presented in this report;
 
 
 
4
 
The registrant's other certifying officer and I are responsible for establishing and maintaining disclosure controls and procedures (as defined in Exchange Act Rules 13a-15(e) and 15d-15(e)) and internal control over financial reporting (as defined in Exchange Act Rules 13a-15(f) and 15d-15(f)) for the registrant and have:

 
a)
 
Designed such disclosure controls and procedures, or caused such disclosure controls and procedures to be designed under our supervision, to ensure that material information relating to the registrant, including its consolidated subsidiaries, is made known to us by others within those entities, particularly during the period in which this report is being prepared;
 
 
 
 
 
b)
 
Designed such internal control over financial reporting, or caused such internal control over financial reporting to be designed under our supervision, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles;
 
 
 
 
 
c)
 
Evaluated the effectiveness of the registrant's disclosure controls and procedures and presented in this report our conclusions about the effectiveness of the disclosure controls and procedures, as of the end of the period covered by the report based on such evaluation; and
 
 
 
 
 
d)
 
Disclosed in this report any change in the registrant's internal control over financial reporting that occurred during the registrant's most recent fiscal quarter (the registrant's fourth fiscal quarter in the case of an annual report) that has materially affected, or is reasonably likely to materially affect, the registrant's internal control over financial reporting; and

5
 
The registrant's other certifying officer and I have disclosed, based on our most recent evaluation of internal control over financial reporting, to the registrant's auditors and the audit committee of the registrant's board of directors (or persons performing the equivalent functions):

 
a)
 
All significant deficiencies and material weaknesses in the design or operation of internal control over financial reporting which are reasonably likely to adversely affect the registrant's ability to record, process, summarize and report financial information; and
 
 
 
 
 
b)
 
Any fraud, whether or not material, that involves management or other employees who have a significant role in the registrant's internal control over financial reporting.
 
 
 
 
Date:
August 4, 2017
 
/s/ Nadeem Moiz
 
 
 
Nadeem Moiz
 
 
 
Executive Vice President and Chief Financial Officer




EXHIBIT 32.1
CERTIFICATION PURSUANT TO
18 U.S.C. SECTION 1350,
AS ADOPTED PURSUANT TO
SECTION 906 OF THE SARBANES-OXLEY ACT OF 2002


Each of the undersigned hereby certifies, in his capacity as an officer of Superior Industries International, Inc. (the “company”), for purposes of 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002, that to the best of his knowledge:

The Quarterly Report of the company on Form 10-Q for the period ended June 25, 2017 as filed with the Securities and Exchange Commission fully complies with the requirements of Section 13(a) or Section 15(d), as applicable, of the Securities Exchange Act of 1934, as amended; and

The information contained in such report fairly presents, in all material respects, the financial condition and results of operations of the company.

 
 
 
 
 
 
 
 
Dated:
August 4, 2017
/s/ Donald J. Stebbins
 
 
 Name:
Donald J. Stebbins
 
 
 Title:
Chief Executive Officer and President
 
 
 
 
 
 
 
 
 
 
/s/ Nadeem Moiz
 
 
 Name:
Nadeem Moiz
 
 
 Title:
Executive Vice President and Chief Financial Officer