Check the appropriate box below if the Form 8-K filing is intended to simultaneously satisfy the filing obligation of the registrant under any of the following provisions (see General Instruction A.2. below):
[ ] Written communications pursuant to Rule 425 under the Securities Act (17 CFR 230.425)
[ ] Soliciting material pursuant to Rule 14a-12 under the Merger Act (17 CFR 240.14a-12)
[ ] Pre-commencement communications pursuant to Rule 14d-2(b) under the Merger Act (17 CFR 240.14d-2(b))
[ ] Pre-commencement communications pursuant to Rule 13e-4(c) under the Merger Act (17 CFR 240.13e-4(c))
Item 1.01 Entry into a Material Definitive Agreement
On November 8, 2010, Klever Marketing, Inc. (the Company) issued a press release communicating that the Company had entered into two major software development contracts to further the development of its proprietary software applications. The press release issued and the related agreements entered into are hereby incorporated by reference into this Item 1.01. A full copy of this press release is included as Exhibit 99.1 to this 8-K. The agreements referred to in the press release are included as Exhibits 10.6 and 10.7 to this 8-K.
Item 9.01 Financial Statements and Exhibits
(d) Exhibits:
Exhibit No. Document
10.6 Software Development Works Agreement between Klever Marketing, Inc. and Qualzoom Inc. dated August 15, 2010
10.7 Software Development Agreement between Klever Marketing, Inc. and Briabe Media Inc. dated September 22, 2010
99.1 Press release dated November 8, 2010 announcing Klever Marketing, Inc. entering into software development agreements with Qualzoom Inc. and Briabe Media, Inc.
SIGNATURES |
Pursuant to the requirements of the Securities Exchange Act of 1934, the Registrant has duly caused this report to be signed on its behalf by the undersigned hereunto duly authorized.
Date: November 19, 2010
Klever Marketing, Inc. |
/S/ Paul G. Begum |
Paul G. Begum |
Chairman and CEO |
EXHIBIT INDEX |
10.6 Software Development Works Agreement between Klever Marketing, Inc. and Qualzoom Inc. dated August 15, 2010
10.7 Software Development Agreement between Klever Marketing, Inc. and Briabe Media Inc. dated September 22, 2010
99.1 Press release dated November 8, 2010 announcing Klever Marketing, Inc. entering into software development agreements with Qualzoom Inc. and Briabe Media, Inc.
Software Development Works Agreement |
Statement of Work |
This Statement of Work ("SOW") adopts and incorporates by reference the terms and conditions of the Software Development Works Agree ment (Agreement)
BETWEEN |
Qualzoom Inc., whose registered office is at 5350 Avenida Maravillas / Box 7031, RSF, CA 92067 USA (Qualzoom/Supplier)
AND |
Klever Marketing (Klever/Buyer), whose registered office is at
This SOW is effective upon signature date of this SOW and will remain in effect until the end of the Warranty Period. Transactions performed under this SOW will be conducted in accordance with and be subject to the terms and conditions of this SOW, the Base Agreement, and any applicable Work Authorizations.
The following is incorporated in and made part of this SOW:
· Appendix A Project Change Control Procedure
· Appendix B: Quality Requirements For Commercially Available Software
1 Scope of Work
This Statement of Work defines the effort to develop, test, and support a mobile application solution (mobile client and server) for Klever Medias Giving Cart technology.
The work consists of developing, porting test/integration, deploying and supporting a complete end-to-end mobile application system including client application and backend web application + database development as outlined in Klever Mobile Application Requirement v1.0 (Requirement Spec).
The work will be carried out by Qualzoom personnel, with qualification of software developers and system/UI tester and seniority that ranges from Senior to Expert.
The scope of work includes software testing and commercial support. Completion criteria are the successful execution of the test cases during Acceptance Testing.
2 Documentation
Referred documents:
# Title | Version |
[1] Klever Mobile Application Requirements | 1.0 |
[2] | |
[3] Other product documentation will be defined during the work |
3 Solution description
The Mobile Client application will feature the following characteristics:
Platform developing environment | iPhone OS, Android |
Tailored for the following handset | iPhone 3GS, iPhone4 |
models | Android Platform based mobile handsets (tbd) |
Supported Localization | English |
Over the Air Upgrade | Possible updates will be performed over the air. |
The content server will be hosted by Klevernet |
3.1 Features from User Prospective
The Mobile Client will support the features specified in document [1].
Concerning UI loo k and feel, document [1] Klever Mobile Application Requirements provides a high level reference framework.
During the work, the user experience of Mobile Client will be jointly agreed with Klever.
3.2 Quality Target for the application
The quality target of the Mobile Client application software is listed in the following table.
Perceived quality parameters | Coverage |
Power Management | Addressed, limited to the capability of the OS in |
the mobile handset | |
Usability and MMI interface | Addressed |
Phone application integration | Addressed |
SIM and address book integration | Addressed |
Standards and Protocols | |
Standard Compliance and | To achieve interoperability with external system |
interoperability | and network APIs |
Software related parameters | |
Exception Handling | Covering most network faults or conditions |
Optimization | Addressing optimal usage of the network |
connections | |
Engineering mode and service mode | Not addressed |
3.3 Support
Support during Warranty will be as per the following Service Level Objectives
4 Qualzoom Responsibilities
4.1 General Description
Qualzoom will design, develop, test, and support the deployment of the Klever Mobile Client application and server software. The following tasks are to be completed for application deployment:
Task 1 - Qualzoom Project Management
The purpose of this task is to manage the Qualzoom resources, tasks, and issues. This task consists of the following subtasks:
· Prepare the Project Plan identifying the activities, estimates, resource assignments, and dependencies required to design, port, test, and support the Mobile application.
· Conduct weekly status meetings with Klever. Items to cover:
- Accomplishments of the period
- Plans for next period
- Issues
- Development Status (summary percentage of developed code and other software metrics)
· Serve as the single point of contact for development
This task is on-going through the term of this SOW and will be complete when the Mobile Application has successfully passed Acceptance Testing.
Task 2 - Software Release development
The purpose of this task is to develop the software releases of the Klever Mobile Application solutions.
The development will go through various Beta Releases, Release Candidate for Acceptance and the Final Release.
The Beta releases will provide all the application functions in an incremental fashion. Such releases will be given by the development team to the testing team for verification purposes. The purpose is to verify usability, UI design, Web/DB Server design and compliance with the Klevernet requirement specification.
The final Beta release, referred as the Release Candidate for Acceptance, will be used for Acceptance procedure.
This task will be completed when the Klever Mobile Application Release Candidate meets the expected results defined in the Acceptance Test Case Document.
The Release Candidate will be then name as the Final Release to be used for deployment purposes.
Task 3 - IOT and Regression Testing
The purpose of this task is to support the IOT (Inter-Operability Testing) and Regression Testing of the Klever Mobile application solution, including mobile and Web/DB Server components on live network.
This task consists in performing test in real case scenarios on Beta Release of the Mobile application. The corresponding results will be document on IOT/Regression Test Reports.
Task 4 - Development during Support phase
The purpose of this task is to provide development support in case defects (as per Table 1 Service Level Objective) are found during the deployment phase for the duration of the Warranty.
Maintenance releases will be developed to solve defects found during live operation. Each maintenance release will be given to Klever and made available to existing customer base through OTA Upgrade.
Task 5 - Verification and Regression Testing during Support phase
The purpose of this task is to provide Verification and Regression Testing support in case defects are found during the deployment phase for the duration of the Warranty.
Each maintenance release will be tested to verify that it fixs the found defects. Such release will also be regression tested to verify that additional bugs have not been added.
A Regression and Verification Testing Summary Report reports the testing result as soon as the maintenance release passes the functional and regression tests criteria.
4.2 Developed Works
The following deliverables are considered Developed Works for the purposes of this SOW. These deliverables were defined in the Responsibilities section and are due in accordance with the estimated schedule in Section 7.
Deliverables of Task 1 -Qualzoom Project Management
·
Project Plan
Deliverables of Task 2 -Software Release development
·
Release Candidate for Acceptance
·
Final Release
Deliverables of Task 3 -IOT and Regression Testing
·
IOT/Regression Test Report
Deliverables of Task 4 -Development during Support phase
·
Maintenance Release (if any)
Deliverables of Task 5 -Verification and Regression Testing during Support phase
·
Verification Testing Summary Report
4.3 Licensed Works
Supplier grants Buyer a fully paid up, exclusive, worldwide, perpetual, irrevocable license to use, execute, install, and deploy the Mobile Application software (Software).
4.4 Supplier Restrictions
The license granted herein shall be exclusive to Klever and Qualzoom shall not grant any license, or grant any interest whatsoever in, sell, offer for sale to other vendors.
5 Klever responsibilities
Task 6 - Klever Project Management
The objective of this task is to provide a single point of contact to Qualzoom for development of the Mobile Application software. This task consists of the following subtasks:
· Participate in weekly status meeting with Qualzoom .
· Provide Qualzoom with the Klever products, prototypes, accessories, documentation and software identified as dependencies for the development.
Additional requests will be given during the weekly status meetings.
· Provide reviews and approvals on Qualzoom deliverables in accordance with agreed-to timeframes in the Project Plan
· Serve as the single point of contact for Problem Reporting during the UI Testing and Acceptance Testing
This task will be complete when the Acceptance Testing has been successfully completed.
Task 7 - Conduct Acceptance Testing
· Support and attend Acceptance Testing activities
· Finalize the Acceptance Testing Report based on results of the Acceptance Testing procedure
This task completes when the Mobile Application Release Candidate meets the expected results defined in the Acceptance Test Case Document.
5.1 Deliverables
The following deliverables were defined in the previous section and are due in accordance with the estimated schedule in Section 7.
Deliverables of Task 6 -Klever Project Management
·
Supporting docs, Required SW licenses, HW, accessories as required
Deliverables of Task 7 -Conduct Acceptance Testing
·
Acceptance Testing Report
6 External Dependencies
Ext 1 - According to section 6 External interface requirements and section 8 Open Issues of document [1] Klever Mobile Application Requirements.
7 Major Milestones and Overall Schedules
A detailed Project Plan will be developed as part of this agreement by Qualzoom. The following table lists summary of major deliverables. The nature of the work is collaborative, and both Qualzoom and Klever will team up to complete the work with the target dates.
Items | Milestones & Deliverables | Responsible | Involved |
M1 | Signing of the Development Agreement | Joint | Joint |
M2 | Definition & Approval of all functional requirements | Klever | Review |
M3 | Design of backed web application & database | Qualzoom | Review |
M4 | Core mobile client application design | Qualzoom | Review |
M5 | User Interface Design & Definition | Qualzoom | Review |
M6 | Test & Integration Plan | Qualzoom | Review |
M7 | Backend web & database development | Qualzoom | Review |
M8 | Core mobile client application development | Qualzoom | Review |
M9 | iPhone implementation | Qualzoom | Review |
M10 | CPG/Retail coordination and access for data | Joint | Joint |
migration into backend web system | |||
M11 | iPhone usability tuning | Qualzoom | Review |
M12 | System integration & testing | Qualzoom | Review |
M13 | Beta Release | Qualzoom | Review |
M14 | Android platform implementation | Qualzoom | Review |
M15 | Android usability tuning | Qualzoom | Review |
M16 | Complete system integration | Qualzoom | Review |
M17 | Deployment | Joint | Joint |
The following schedule provides overall schedule for activities listed above. These es timates may be superseded by schedule s developed as part of detailed pr o ject plan.
8 Overall Resource Allocation
According to the overall deliverables and timelines as described above, Qualzoom will allocate the following resources for the duration of the project:
High level tasks | Resources | Roles |
Overall Project management | Program manager | Project manager |
Mobile Client Design & | Development Engineer1 | Lead Engineer |
Development | Development Engineer2 | Engineer |
Backend Web & database | Development Engineer1 | Lead Engineer |
design & Development | Development Engineer2 | Engineer |
Test Plan & Execution | Test Engineer1 | Engineer |
9 PROJECT COMPLETION AND Klever ACCEPTANCE CRITERIA
The development of the Klever Mobile Application will be completed when the deliverables defined in Sections 4 of this SOW have been approved with written notification by the Klever Project Manager, the Beta trial evaluation period has been completed, and the reported in-scope defects (functional and load) have been successfully resolved and approved by the Klever Project Manager.
10 SCHEDULE AND PAYMENT TERMS
10.1 Fixed Fee
Subject to the conditions expressed in this Agreement and SOW, Klever shall pay Qualzoom a fixed price of $210,000 on the schedule set forth in the below for the completed work that is performed under this SOW.
Upon execution of this SOW, Klever shall provide Qualzoom with a supporting purchasing order (PO).
Any additional requirements for funding must be requested first via the Project Change Request (PCR) and finalized with an executed amendment to this SOW.
PAYMENT AND MILESTONE SCHEDULE | |
Milestone | Payment |
M1 - Upon on execution of this Agreement | $65,000 |
M13 Beta Release | $65,000 |
M17 Commercial Release | $65,000 |
10.2 Invoicing
Within thirty (30) days of receipt of a correct invoice ISSUED BY QUALZOOM, provided Klever has accepted each Deliverable identified in this SOW, Klever will pay Qualzoom the amounts listed in this SOW in accordance with the corresponding payment schedule. All payments shall mean the agreed-upon price and currency in US Dollar.
10.3 Payments
All the payments to Qualzoom, shall be made to the following bank account:
11 Confidential Disclosure Agreements
The disclosure of confidential information between Klever and Qualzoom is subject to the terms and conditions of a Confidential Disclosure Agreement and any relevant Supplements thereto. No confidential information exchange between Qualzoom and Klever shall occur until after a NDA is signed, which specifies what information is being exchanged.
12 Quality Measurements
Qualzoom represents that it has a product and service quality program that includes:
·
Performance targets;
·
Assessment of engineering, development and test processes;
· Configuration and change management processes;
· Assessment of the quality of Deliverables, Products and Services;
· Documents non-conformances; and
· Processes to correct errors or other non-conformances. Supplier will periodically, as negotiated, provide Buyer its standard product development life cycle and error metrics.
An example of the data of interest is included in the Appendix entitled Sample D ata Collection Form for Supplier.
The parties agree that the Appendix entitled "Quality Requirements for Commercially Available Software" is hereby incorporated by reference into this Agreement.
13 Communications
All communications between the parties will be carried out through the following designated coordinators:
Business Coordinators | ||
For Qualzoom | For | |
Klever | ||
Name | Name | Robert A. Campbell |
Title | Title | |
Address | Address | |
Phone | Phone | 310-628-1158 |
bccontrol@gmail.com |
14 Governing Law
This Agreement shall be governed by and construed in accordance with the laws of the State of California, the United States of America, without regard to provisions concerning conflicts of law. The United Nations Convention on Contracts for the International Sale of Goods shall not apply to this Agreement. In the event any proceeding or lawsuit is brought by either Party in connection with this Agreement, the prevailing Party in such proceeding or lawsuit shall be entitled to receive its costs for such action, including its reasonable attorneys' fees and expert witness fees.
Appendix A |
Project Change Control Procedure |
Either party may request changes to this SOW at any time. Both the KLEVER and Qualzoom Project Managers must approve each change before implementing it. Any change to the scope of this SOW must be made by a formal Amendment to the SOW executed by the parties. Until a change is agreed in writing, both parties will continue to act in accordance with the latest agreed version of the SOW
The following describes the procedure to be used if a change to this SOW is required:
· A Project Change Request (PCR) will be the initial vehicle for communicating change. The PCR must describe the change, the rationale for the change, and the effect the change will have on the project.
· The designated Project Managers of the requesting party will review the change and determine whether to submit the request to the other party. Both Project Managers will review the proposed change and approve it for further investigation or reject it.
· Prior to amending this SOW, the PCR must signed by both parties.
APPENDIX B |
QUALITY REQUIREMENTS FOR |
COMMERCIALLY AVAILABLE SOFTWARE |
Supplier will verify the performance of the following processes in order to ensure their ability to support fielded Supplier product and respond to Buyer requirements.
1 SUPPLIERS DEVELOPMENT AND SUPPORT MANAGEMENT
Supplier will initially document and provide to Buyer the measurement of size of product, the product errata data (e.g., number of defects reported and fixed in the product, number and size of maintenance releases, etc.), and size and makeup of product management, development, and support teams. Suppliers quality assurance team will periodically measure tracking activities and review with Buyer (Buyer and Supplier will determine frequency of project management reviews, which will not be more than one per year).
2 CHANGE MANAGEMENT PROCESS ASSESSMENT
2.1 Assessment Elements
Suppliers quality assurance team will determine the status of product support activities by making appropriate periodic measurements and reviewing with Supplier project management, Supplier senior management and Buyer. An initial assessment of product support and change management processes has been made by Buyer, with presentation by Suppliers quality assurance team. Ongoing assessments, as appropriate, will be made at twelve (12) month intervals, or otherwise as agreed by Buyer and Supplier.
Assessment Elements will consist of the following, at a minimum.
a) Review of the overall change management (CM) process used by Supplier to manage change and/or enhancement requests for the base product and any Buyer specific deliverables.
b) Review of the CM plan and status of CM activities against plan for Buyer specific deliverables and base product changes and enhancements.
c) Change request summary and status for Buyer specific deliverables and base product changes and enhancements.
d) Trouble report summary and status for Buyer specific deliverables and base product changes and enhancements.
e) Completed work, expended effort and resources in CM activities for Buyer specific deliverables and base product changes and enhancements.
f) Results of configuration item baseline audits for Buyer specific deliverables and base product changes and enhancements.
g) Review of project schedules, issues, concerns, relevant technical specifications, and testing status for Buyer specific deliverables and base product changes and enhancements.
h) Buyer participation in testing process prior to release including scenarios, test plans, integration and scalability testing and beta release.
3 REVIEWS
On a periodic basis, if deemed necessary due to high defect rates experienced by Buyer in Suppliers product, Buyer or Buyers quality representative may conduct reviews at Suppliers and Suppliers sub - tier suppliers development locations. Supplier may, at
Buy ers request and at a mutually agreeable time, permit access to Buyer to Software
Development operations and inspection of interim and final change management deliverables for Buyer specific and base product deliverables, including access to the sub -tier supplier facilities. Reviews shall include review of Supplier product process control, quality inspection test data, internal audit reports, and other information related to the product being procured to verify compliance to the terms of this Software Supplier Quality Appendix (SSQA). Under normal circumstances Supplier shall be given at least a two week advance notice by Buyer representatives of their intent to visit. Supplier shall ensure access for Buyers auditors to all the s ites where work is being performed or materials being delivered to Supplier in performance of Suppliers change management work for Buyer specific and base product deliverables. A high defect rate is defined as more than two occurrences of a production out age of Suppliers product found to be due to Supplier product flaws, or two or more defects in Suppliers product which affect Buyer by requiring code fixes by Supplier to resolve in any one Supplier product release.
4 DOCUMENT CONTROL
Supplier shall ensure that all documents pertinent to its product, such as software change management specifications and designs, contracts, policies, procedures, software development process flow chart, and work instructions (including test procedures) are under configuration control and are available to all necessary personnel in the development environment. Supplier shall a have a document configuration control system for the effective updating/removal of any obsolete documentation from all development areas.
5 QUALITY RECORDS
Supplier shall establish and maintain procedures for identification, collection, indexing, filing, storage, maintenance, and disposition of all quality records.
6 QUALITY PROBLEM NOTIFICATION TO BUYER
Supplier must notify Buyer of any quality or reliability problems, using Suppliers standard procedures or those negotiated between Buyer and Supplier that may affect Buyers use of Suppliers product. These problems may have been identified by Supplier's internal testing (i.e., process control data, internal test data, quality data, etc.), by third parties who produce products on behalf of Buyer, or by another customer (see ISO 9001).
7 CHANGES
Buyers quality representative shall be notified of all software development life cycle process changes, development, test, and support location changes, or development, test, or support outsourcing decisions for Suppliers product(s) covered by this agreement, at least ninety (90) days prior to their implementation as these changes may significantly affect form, fit, function, quality, reliability or support for Suppliers product.
APPENDIX C |
Warranties |
Supplier warrants to Buyer as follows:
The Delivered Software will be free from errors, will conform to and perform in accordance with the Specifications including User documentation and will function properly.
The Delivered Software will be compatible with and operate with other software, hardware and products configured in accordance with user documentation.
The initial warranty period shall begin upon delivery of the Delivered Software and continue for one (1) year (Warranty Period).
The performance warranty shall begin upon Acceptance of the Delivered Software and continue for the period during which Buyer shall be entitled to receive maintenance.
Repaired and replacement Delivered Software shall be warranted as set forth above in this clause. THE FOREGOING WARRANTY IS IN LIEU OF AND EXCLUDES ALL OTHER EXPRESS OR IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO WARRANTY OF MERCHANTABILITY AND WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE.
Exhibit 10.7
Klever Marketing: Design Proposal |
September 22, 2010 |
The items included in this proposal including all creative concepts, program recommendations, slogans, graphical designs and other items are confidential intellectual properties of Briabe Media, Inc. The use of this information other than to establish a working relationship with Briabe or to promote our capabilities is strictly prohibited.
Introduction
As a part of a broader update of its corporate image and products, Klever Marketing is seeking assistance in defining a new corporate identification while incorporating design elements that better conveys to its major stakeholders its unique value propositions, mission and role in the mobile marketing ecosystem. As a part of these plans, Klever has contacted Briabe Media to request a proposal for major design and branding support.
We are pleased to extend Klever our proposal for design assistance with the brand elements identified herein. As an interactive agency with significant mobile marketing experience with some of the nations leading advertisers and advertising agencies, Briabe is uniquely positioned to assist Klever in developing and executing successful design strategies that will resonate with your target audiences to deliver the desired business results.
© 2010 BRIABE MEDIA INC. | Proposal | Page 2 |
All rights reserved. | Briabe Media proprietary and Confidential |
Briabes Design Proposal
© 2010 BRIABE MEDIA INC. | Proposal | Page 3 |
All rights reserved. | Briabe Media proprietary and Confidential |
Total Proposal for Design Elements: $18,740
Payment Terms
Upon completion of each milestone listed below (each a Milestone) and acceptance by Klever of all Deliverables associated with each such Milestone (and completion of all prior Milestones), Briabe Media may invoice Klever the amount listed for such Milestone below:
Item | Amount | Due Date |
Payment 1: Kickoff | $3000 | 10/1/10 |
Payment 2: Branding | $5247.67 | 10/15/10 |
Payment 3: Flash | $5247.67 | 10/30/10 |
Payment 4: Application | $5247.67 | 11/15/10 |
All payments are due on receipt.
© 2010 BRIABE MEDIA INC. | Proposal | Page 4 |
All rights reserved. | Briabe Media proprietary and Confidential |
Work for Hire
Except for Briabe Media s or its partner frameworks and code libraries initially used in development or other Briabe proprietary materials, all other materials, products, and modifications developed or prepared by Briabe Media under this Agreement, includin g without limitation forms, images and text viewable on the Internet, any HTML elements relating thereto, and software, including the deliverables and any updates thereto, are the property of the customer and all right, title and interest therein shall vest in the company and s hall be deemed to be a work made for hire under Inter United States & Canada copyright laws.
Contact
For questions or to accept this proposal, please contact:
James Briggs
CEO
Briabe Media Inc.
Mobile: 310-710-2380
james.briggs@briabemedia.com
www.briabemedia.com
Agreement To Engage
The undersigned agree that this proposal submitted to Klever accurately reflects the scope of the work to which Briabe Media will deliver. Furthermore, this Consulting Service Agreement and the related work effort are mutually agreeable to both parties.
© 2010 BRIABE MEDIA INC. | Proposal | Page 5 |
All rights reserved. | Briabe Media proprietary and Confidential |
Exhibit 99.1 |
Klever Marketing Announces Two Major Software Development Contracts Now in Progress Which will Revolutionize the Shopping Experience.
LOS ANGELES, Nov. 8, 2010 /PRNewswire/ -- Following up on the Board's decision to expand the Company's grocery shopping applications onto a mobile platform connecting consumers with the brands they want, Klever Marketing, Inc. (OTC Bulletin Board: KLMK) announced the award of a software development contract to Qualzoom to develop the application and database software for the 2011 launch of Klever's Mobile Network. Qualzoom is a successful global, mobile application developer, test laboratory and a major subcontractor to Qualcomm. Qualzoom was selected not only for its programming and testing capability, but also for its ability to readily port applications onto multiple platforms which will enable Klever to reach a broad audience of mobile users more quickly. "With offices worldwide, Qualzoom has the dedicated resources to advance Klever's capabilities to propel us to the next level of mobile performance to revolutionize the grocery shopping experience," stated Paul G. Begum, CEO/Founder.
Qualzoom is developing Klever's iPhone and Android mobile application Klever SHOP, and Klever's shopper demographics and coupon processing database KleverNET. KleverSHOP will combine the attributes of mobile location-based technology together with Klever's product information, coupon and in-store services.
KleverNET hopes to become a powerful backend consumer product database, tracking consumer purchases and buying habits. There will also be a mobile management web-based platform serving the promotional needs of consumers, product manufacturers and retailers. As a cloud-based resource, KleverNET, is hoping to become a valuable resource for the targeted placement of mobile promotions and coupons. Klever's powerful search match engine and business analytics API will be available for licensing to future shopping applications.
Klever also announced the signing of a contract with a talented mobile marketing company, Briabe Media, Inc. to assist Klever with defining its mobile marketing requirements along with the visual design and graphic interface of its KleverSHOP application to help successfully guide the Klever Company into their market niche.
To further assist the Company with its ongoing financial planning and reporting Klever has hired a financial accounting consultant, DBH Consulting (Salt Lake City) experienced in mergers and acquisitions.
Klever Marketing Inc, a Delaware Corporation, has recently recapitalized and is currently seeking selective opportunities to acquire private companies in the Mobile Phone Technology as acquisition targets.
CONTACT: Paul G. Begum, 801-847-6444, pgbegum@klevermarketing.com
To subscribe directly to Klever Marketing news releases please click the following link:
http://www.klevermarketing.com/subscribe.php
SOURCE Klever Marketing, Inc.
Back to top
RELATED LINKS http://www.kleverkart.com