Item 1. Business

       Honeywell International Inc. (Honeywell) is a diversified technology and manufacturing company, serving customers worldwide with aerospace products and services, control, sensing and security technologies for buildings, homes and industry, turbochargers, automotive products, specialty chemicals, electronic and advanced materials, and process technology for refining and petrochemicals. Honeywell was incorporated in Delaware in 1985.

       We maintain an internet website at http://www.honeywell.com. Our Annual Report on Form 10-K, Quarterly Reports on Form 10-Q, Current Reports on Form 8-K and any amendments to those reports, are available free of charge on our website under the heading “Investor Relations” (see “SEC Filings & Reports”) immediately after they are filed with, or furnished to, the Securities and Exchange Commission (SEC). In addition, in this Form 10-K, the Company incorporates by reference certain information from parts of its proxy statement for the 2007 Annual Meeting of Stockholders, which we expect to file with the SEC on or about March 12, 2007, and which will also be available free of charge at our website.

       Information relating to corporate governance at Honeywell, including Honeywell's Code of Business Conduct, Corporate Governance Guidelines and Charters of the Committees of the Board of Directors are also available, free of charge, on our website under the heading “Investor Relations” (see “Corporate Governance”), or by writing to Honeywell, 101 Columbia Road, Morris Township, New Jersey 07962, c/o Vice President and Corporate Secretary. Honeywell's Code of Business Conduct applies to all Honeywell directors, officers (including the Chief Executive Officer, Chief Financial Officer and Controller) and employees.

       The certifications of our Chief Executive Officer and Chief Financial Officer pursuant to Section 302 and Section 906 of the Sarbanes-Oxley Act of 2002 about the disclosure contained in this Annual Report on Form 10-K are included as Exhibits 31.1, 31.2, 32.1 and 32.2 to this Annual Report and are available free of charge on our website under the heading “Investor Relations” (see “SEC Filings & Reports”). Our Chief Executive Officer certified to the New York Stock Exchange (NYSE) on May 23, 2006, pursuant to Section 303A.12 of the NYSE's listing standards, that he was not aware of any violation by Honeywell of the NYSE's corporate governance listing standards as of that date.

Major Businesses

       We globally manage our business operations through four businesses that are reported as operating segments: Aerospace, Automation and Control Solutions, Specialty Materials and Transportation Systems. Financial information related to our operating segments is included in Note 23 of Notes to Financial Statements in “Item 8. Financial Statements and Supplementary Data.”

       The major products/services, customers/uses and key competitors of each of our operating segments follows:

1

Product/Service Classes		Major Products/Services		Major Customers/Uses		Key Competitors
Auxiliary power units (APUs)		Airborne auxiliary power units Jet fuel starters Secondary power systems Ground power units Repair, overhaul and spare parts		Commercial, regional, business and military aircraft Ground power		United Technologies
Environmental control systems		Air management systems: Air conditioning Bleed air Cabin pressure control Air purification and treatment Gas Processing Heat Exchangers Turbo Systems Repair, overhaul and spare parts		Commercial, regional and general aviation aircraft Military aircraft Ground vehicles Spacecraft		Auxilec Barber Colman Dukes Eaton-Vickers Goodrich Liebherr Pacific Scientific Parker Hannifin Smiths TAT United Technologies
Electric power systems		Generators Power distribution & control Power conditioning Repair, overhaul and spare parts		Commercial, regional, business and military aircraft		Goodrich Safran Smiths United Technologies
Engine systems and accessories		Electronic and hydromechanical fuel controls Engine start systems Electronic engine controls Sensors Valves Electric and pneumatic power generation systems Thrust reverser actuation, pneumatic and electric		Commercial, regional and general aviation aircraft Military aircraft		BAE Controls Goodrich Parker Hannifin United Technologies
Aircraft hardware distribution		Fasteners, including nuts, bolts, rivets, clamps and pins Bearings, including ball, roller, spherical, needle and ceramic Electrical hardware, including connectors, components, lighting products, terminals, and wire and wiring accessories Seals, including seals, o-rings, gaskets and packings Value-added services, repair and overhaul kitting and point-of-use replenishment		Commercial, regional, business and military aviation aircraft		Anixter Arrow Pemco Avnet BE Aerospace (M&M Aerospace) Fairchild Direct Satair Wencor Wesco Aircraft
Avionics systems		Flight safety systems: Enhanced Ground Proximity Warning Systems (EGPWS) Traffic Alert and Collision Avoidance Systems (TCAS) Windshear detection systems Flight data and cockpit voice recorders Weather radar Communication, navigation and surveillance systems: Navigation &   communication   radios Global positioning systems Satellite systems Integrated systems		Commercial, business and general aviation aircraft Government aviation		BAE Boeing/Jeppesen Garmin Goodrich Kaiser L3 Lockheed Martin Northrop Grumman Rockwell Collins Smiths Thales Trimble/Terra Universal Avionics Universal Weather

2

Product/Service Classes		Major Products/Services		Major Customers/Uses		Key Competitors
Avionics systems (continued)		Flight management systems Cockpit display systems Data management and aircraft performance monitoring systems Aircraft information systems Network file servers Wireless network transceivers Weather information network Navigation database information Cabin management systems Vibration detection and monitoring Mission management systems Tactical data management systems
Aircraft and Obstruction lighting		Inset lights Regulators Tower and obstruction lights Interior and exterior aircraft lighting		Commercial, regional, business, helicopter and military aviation aircraft (operators, OEMs, parts distributors and MRO service providers) General contractors (building and tower manufacturers), cell phone companies		Bruce Hella/Goodrich LSI Luminator Siemens Whelen
Inertial sensor		Inertial sensor systems for guidance, stabilization, navigation and control Gyroscopes, accelerometers, inertial measurement units and thermal switches		Military and commercial vehicles Commercial spacecraft and launch vehicles Commercial, regional, business and military aircraft Transportation Missiles Munitions		Astronautics-Kearfott BAE Ball GEC L3 Com KVH Northrop Grumman Rockwell Smiths
Control products		Radar altimeters Pressure products Air data products Thermal switches Magnetic sensors		Military aircraft Missiles, UAVs Commercial applications		Ball Brothers BAE Druck Goodrich NavCom Northrop Grumman Rosemount Solarton
Space products and subsystems		Guidance subsystems Control subsystems Processing subsystems Radiation hardened electronics and integrated circuits GPS-based range safety systems		Commercial and military-spacecraft DoD FAA NASA		BAE Ithaco L3 Northrop Grumman Raytheon
Management and technical services		Maintenance/operation and provision of space systems, services and facilities Systems engineering and integration Information technology services Logistics and sustainment		U.S. government space (NASA) DoD (logistics and information services) FAA DoE Local governments Commercial space ground segment systems and services		Bechtel Boeing Computer Sciences Dyncorp ITT Lockheed Martin Raytheon SAIC The Washington Group United Space Alliance

3

Product/Service Classes		Major Products/Services		Major Customers/Uses		Key Competitors
Landing systems		Wheels and brakes Wheel and brake repair and overhaul services		Commercial airline, regional, business and military aircraft High performance commercial vehicles USAF, DoD, DoE Boeing, Airbus, Lockheed Martin		Dunlop Standard Aerospace Goodrich K&F Industries Messier-Bugatti NASCO
Automation and Control Solutions
Environmental combustion controls; sensing controls		Heating, ventilating and air conditioning controls and components for homes and buildings Indoor air quality products including zoning, air cleaners, humidification, heat and energy recovery ventilators Controls plus integrated electronic systems for burners, boilers and furnaces Consumer household products including humidifiers and thermostats Electrical devices and switches Water controls Sensors, measurement, control and industrial components		Original equipment manufacturers (OEMs) Distributors Contractors Retailers System integrators Commercial customers and homeowners served by the distributor, wholesaler, contractor, retail and utility channels Package and materials handling operations Appliance manufacturers Automotive companies Aviation companies Food and beverage processors Medical equipment Heat treat processors Computer and business equipment manufacturers		Bosch Cherry Danfoss Eaton Emerson Endress & Hauser Holmes Invensys Johnson Controls Motorola Schneider Siemens United Technologies Yamatake
Security and life safety products and services		Security products and systems Fire products and systems Access controls and closed circuit television Home health monitoring and nurse call systems Gas detection products and systems Emergency lighting		OEMs Retailers Distributors Commercial customers and homeowners served by the distributor, wholesaler, contractor, retail and utility channels Health care organizations Security monitoring service providers		Bosch Draeger GE Mine Safety Appliances Pelco Phillips Riken Keiki Siemens SPX Tyco United Technologies
Process automation products and solutions		Advanced control software and industrial automation systems for control and monitoring of continuous, batch and hybrid operations Production management software Communications systems for Industrial Control equipment and systems Consulting, networking engineering and installation Process control instrumentation Field instrumentation Analytical instrumentation Recorders Controllers Critical environment control solutions and services Aftermarket maintenance, repair and upgrade		Refining and petrochemical companies Chemical manufacturers Oil and gas producers Food and beverage processors Pharmaceutical companies Utilities Film and coated producers Pulp and paper industry Continuous web producers in the paper, plastics, metals, rubber, non-wovens and printing industries Mining and mineral industries		ABB AspenTech Emerson Invensys Siemens Yokogawa

4

Product/Service Classes		Major Products/Services		Major Customers/Uses		Key Competitors
Building solutions and services		HVAC and building control solutions and services Energy management solutions and services Security and asset management solutions and services Enterprise building integration solutions Building information services Airport lighting and systems, visual docking guidance systems		Building managers and owners Contractors, architects and developers Consulting engineers Security directors Plant managers Utilities Large global corporations Public school systems Universities Local governments Public housing agencies Airports		Ameresco GroupMac Ingersoll Rand Invensys Johnson Controls Local contractors and utilities Safegate Schneider Siemens Trane Thorn United Technologies
Specialty Materials
Resins & chemicals		Nylon polymer Caprolactam Ammonium sulfate Cyclohexanone Cyclophexanol (KA Oil)		Nylon for carpet fibers, engineered resins and packaging Fertilizer ingredients Specialty chemicals		BASF DSM
Hydrofluoric acid (HF)		Anhydrous and aqueous hydrofluoric acid		Fluorocarbons Steel Oil refining Chemical intermediates		Ashland E. Merck Hashimoto Norfluor Quimica Fluor
Fluorocarbons		Genetron ® refrigerants, aerosol and insulation foam blowing agents Genesolv ® solvents Oxyfume sterilant gases Ennovate 3000 blowing agent for refrigeration insulation		Refrigeration Air conditioning Polyurethane foam Precision cleaning Optical Appliances Hospitals Medical equipment manufacturers		Arkema Dupont Solvay-Solexis Ineos
Fluorine specialties		Sulfur hexafluoride (SF 6 ) Iodine pentafluoride (IF 5 ) Antimony pentafluoride (SbF 5 )		Electric utilities Magnesium gear manufacturers		Air Products Asahi Glass Solvay-Solexis
Nuclear services		UF 6 conversion services		Nuclear fuel Electric utilities		Cameco Comurhex Rosatom
Research and fine chemicals		Oxime-based fine chemicals Fluoroaromatics High-purity solvents		Agrichemicals Biotech		Avecia Degussa DSM E. Merck Thermo Fisher Scientific Lonza Sigma-Aldrich
Performance chemicals Imaging chemicals Chemical processing Sealants		HF derivatives Fluoroaromatics Catalysts Oxime-silanes		Diverse by product type		Atotech BASF DSM
Advanced fibers & composites		High modulus polyethylene fiber and shield composites Aramid shield composites		Bullet resistant vests, helmets and other armor applications Cut-resistant gloves Rope & cordage		DuPont DSM Teijin
Specialty films		Cast nylon film Bi-axially oriented nylon film Fluoropolymer film		Food and pharmaceutical packaging		American Biaxis CFP Daikin Kolon Unitika
Specialty additives		Polyethylene waxes Paraffin waxes and blends PVC lubricant systems Processing aids Luminescent pigments		Coatings and inks PVC pipe, siding & profiles Plastics Reflective coatings Safety & security applications		BASF Clariant Eastman

5

Product/Service Classes		Major Products/Services		Major Customers/Uses		Key Competitors
Electronic chemicals		Ultra high-purity HF Inorganic acids Hi-purity solvents		Semiconductors		Air Products Arch E. Merck
Semiconductor materials and services		Interconnect-dielectrics Interconnect-metals Semiconductor packaging materials Advanced polymers Sapphire substrates Anti-reflective coatings Thermo-couples		Semiconductors Microelectronics Telecommunications		BASF Brewer Dow Corning Foxconn Japan Energy Kyocera Shinko
Catalysts, adsorbents and specialties		Catalysts Molecular sieves Adsorbents Customer catalyst manufacturing		Petroleum, refining, petrochemical, and manufacturing industries		Akzo Nobel Axens BASF Davison Grace Haldor Shell/Criterion Sud Chemie
Process technology and equipment		Design of process units and systems Engineered products Proprietary equipment Technical personnel and training development		Petroleum refining, petrochemical, and gas processing		ABB Lummus Axens Exxon-Mobil Haldor Koch Glitch Phillips Shell/Criterion Stratco
Transportation Systems
Charge-air systems		Turbochargers for gasoline and diesel engines		Passenger car, truck and off-highway OEMs Engine manufacturers Aftermarket distributors and dealers		Borg-Warner Holset IHI MHI
Thermal systems		Exhaust gas coolers Charge-air coolers Aluminum radiators Aluminum cooling modules		Passenger car, truck and off-highway OEMs Engine manufacturers Aftermarket distributors and dealers		Behr Modine Valeo
Aftermarket filters, spark plugs, electronic components and car care products		Oil, air, fuel, transmission and coolant filters PCV valves Spark plugs Wire and cable Antifreeze/coolant Windshield washer fluids Waxes, washes and specialty cleaners		Automotive and heavy vehicle aftermarket channels, OEMs and Original Equipment Service Providers (OES) Auto supply retailers Specialty installers Mass merchandisers		AC Delco Bosch Champion Mann & Hummel NGK Peak/Old World Industries Purolator STP/ArmorAll Turtle Wax Zerex/Valvoline
Brake hard parts and other friction materials		Disc brake pads and shoes Drum brake linings Brake blocks Disc and drum brake components Brake hydraulic components Brake fluid Aircraft brake linings Railway linings		Automotive and heavy vehicle OEMs, OES, brake manufacturers and aftermarket channels Mass merchandisers Installers Railway and commercial/ military aircraft OEMs and brake manufacturers		Akebono Federal-Mogul ITT Galfer JBI TMD

Aerospace Sales

       Our sales to aerospace customers were 35 percent of our total sales in 2006 and 38 percent of our total sales in each of 2005 and 2004. Our sales to commercial aerospace original equipment manufacturers were 10, 9 and 8 percent of our total sales in 2006, 2005 and 2004, respectively. In addition, our sales to commercial aftermarket customers of aerospace products and services were 11, 15 and 16 percent of our total sales in 2006, 2005 and 2004, respectively. Our Aerospace results of operations can be impacted by various industry and economic conditions. See “Item 1A. Risk Factors.”

6

U.S. Government Sales

       Sales to the U.S. Government (principally by our Aerospace segment), acting through its various departments and agencies and through prime contractors, amounted to $3,688, $3,719 and $3,464 million in 2006, 2005 and 2004, respectively, which included sales to the U.S. Department of Defense, as a prime contractor and subcontractor, of $3,052, $2,939 and $2,808 million in 2006, 2005 and 2004, respectively. U.S. defense spending increased in 2006 and is also expected to increase in 2007. We do not expect to be significantly affected by any proposed changes in 2007 federal spending due principally to the varied mix of the government programs which impact us (OEM production, engineering development programs, aftermarket spares and repairs and overhaul programs). Our contracts with the U.S. Government are subject to audits, investigations, and termination by the government. See “Item 1A. Risk Factors.”

Backlog

       Our total backlog at December 31, 2006 and 2005 was $10,674 and $9,327 million, respectively. We anticipate that approximately $8,162 million of the 2006 backlog will be filled in 2007. We believe that backlog is not necessarily a reliable indicator of our future sales because a substantial portion of the orders constituting this backlog may be canceled at the customer's option.

Competition

       We are subject to active competition in substantially all product and service areas. Competition is expected to continue in all geographic regions. Competitive conditions vary widely among the thousands of products and services provided by us, and vary country by country. Depending on the particular customer or market involved, our businesses compete on a variety of factors, such as price, quality, reliability, delivery, customer service, performance, applied technology, product innovation and product recognition. Brand identity, service to customers and quality are generally important competitive factors for our products and services, and there is considerable price competition. Other competitive factors for certain products include breadth of product line, research and development efforts and technical and managerial capability. While our competitive position varies among our products and services, we believe we are a significant competitor in each of our major product and service classes. However, a number of our products and services are sold in competition with those of a large number of other companies, some of which have substantial financial resources and significant technological capabilities. In addition, some of our products compete with the captive component divisions of original equipment manufacturers.

International Operations

       We are engaged in manufacturing, sales, service and research and development mainly in the United States, Europe, Canada, Asia and Latin America. U.S. exports and foreign manufactured products are significant to our operations. U.S. exports comprised 11, 10 and 9 percent of our total sales in 2006, 2005 and 2004, respectively. Foreign manufactured products and services, mainly in Europe, were 37, 35 and 35 percent of our total sales in 2006, 2005 and 2004, respectively.

       Approximately 19 percent of total 2006 sales of Aerospace-related products and services were exports of U.S. manufactured products and systems and performance of services such as aircraft repair and overhaul. Exports were principally made to Europe, Canada, Asia and Latin America. Foreign manufactured products and systems and performance of services comprised approximately 14 percent of total 2006 Aerospace sales. The principal manufacturing facilities outside the U.S. are in Europe, with less significant operations in Canada and Asia.

       Approximately 2 percent of total 2006 sales of Automation and Control Solutions products were exports of U.S. manufactured products. Foreign manufactured products and performance of services accounted for 55 percent of total 2006 sales of Automation and Control Solutions. The principal manufacturing facilities outside the U.S. are in Europe with less significant operations in Asia, Canada and Latin America.

       Approximately 25 percent of total 2006 sales of Specialty Materials products were exports of U.S. manufactured products. Exports were principally made to Asia, Europe, Latin America and Canada.

7

Foreign manufactured products comprised 22 percent of total 2006 sales of Specialty Materials. The principal manufacturing facilities outside the U.S. are in Europe, with less significant operations in Asia and Canada.

Exports of U.S. manufactured products comprised 1 percent of total 2006 sales of Transportation Systems products. Foreign manufactured products accounted for 63 percent of total 2006 sales of Transportation Systems. The principal manufacturing facilities outside the U.S. are in Europe, with less significant operations in Asia, Latin America and Canada.

Financial information including net sales and long-lived assets related to geographic areas is included in Note 24 of Notes to Financial Statements in “Item 8. Financial Statements and Supplementary Data”. Information regarding the economic, political, regulatory and other risks associated with international operations is included in “Item 1A. Risk Factors.”

Raw Materials

       The principal raw materials used in our operations are generally readily available. We experienced no significant or unusual problems in the purchase of key raw materials and commodities in 2006. We are not dependent on any one supplier for a material amount of our raw materials, except related to phenol, a raw material used in our Specialty Materials segment. We purchase phenol under a supply agreement with one supplier. We have no reason to believe there is any material risk to this supply.

       We are highly dependent on our suppliers and subcontractors in order to meet commitments to our customers. In addition, many major components and product equipment items are procured or subcontracted on a sole-source basis with a number of domestic and foreign companies. We maintain a qualification and performance surveillance process to control risk associated with such reliance on third parties. While we believe that sources of supply for raw materials and components are generally adequate, it is difficult to predict what effects shortages or price increases may have in the future.

       The costs of certain key raw materials, including natural gas, benzene (the key component in phenol) and fluorspar in our Specialty Materials' business, steel and nickel in our Transportation Systems business, and nickel, titanium and other metals in our Aerospace business, were at historically high levels in 2006 and are expected to remain at high price levels. In addition, in 2006 certain large long-term fixed supplier price agreements expired, primarily relating to components used by our Aerospace business, which in the aggregate, subjected us to higher volatility in certain component costs. We will continue to attempt to offset raw material cost increases with formula price agreements, price increases and hedging activities where feasible. We have no reason to believe a shortage of raw materials will cause any material adverse impact during 2007. See “Item 1A. Risk Factors” for further discussion.

Patents, Trademarks, Licenses and Distribution Rights

       Our reportable segments are not dependent upon any single patent or related group of patents, or any licenses or distribution rights. We own, or are licensed under, a large number of patents, patent applications and trademarks acquired over a period of many years, which relate to many of our products or improvements to those products and which are of importance to our business. From time to time, new patents and trademarks are obtained, and patent and trademark licenses and rights are acquired from others. We also have distribution rights of varying terms for a number of products and services produced by other companies. In our judgment, those rights are adequate for the conduct of our business. We believe that, in the aggregate, the rights under our patents, trademarks and licenses are generally important to our operations, but we do not consider any patent, trademark or related group of patents, or any licensing or distribution rights related to a specific process or product, to be of material importance in relation to our total business. See “Item 1A. Risk Factors” for further discussion.

       We have registered trademarks for a number of our products and services, including Honeywell, UOP, Prestone, FRAM, Autolite, Bendix, Jurid, Holts, Garrett, Ademco, Fire-Lite, Notifier, System Sensor, MK, Novar, Genetron, Enovate, Spectra, Aclar, Simoniz and Redex.

8

Research and Development

       Our research activities are directed toward the discovery and development of new products, technologies and processes and the development of new uses for existing products. The Company has research and development activities in the U.S., Europe, India and China.

       Research and development (R&D) expense totaled $1,411, $1,072 and $917 million in 2006, 2005 and 2004, respectively. The increase in R&D expense in 2006 compared to 2005 of 32 percent was primarily due to the impact of additional R&D expense for UOP in Specialty Materials as well as product, design and development costs in Aerospace and Automation and Control Solutions. The increase in research and development expense in 2005 compared with 2004 of 17 percent resulted primarily from design and developments costs associated with new aircraft platforms in Aerospace and new product development costs in Automation and Control Solutions. Customer-sponsored (principally the U.S. Government) R&D activities amounted to an additional $777, $694 and $593 million in 2006, 2005 and 2004, respectively.

Environment

       We are subject to various federal, state, local and foreign government requirements regulating the discharge of materials into the environment or otherwise relating to the protection of the environment. It is our policy to comply with these requirements, and we believe that, as a general matter, our policies, practices and procedures are properly designed to prevent unreasonable risk of environmental damage, and of resulting financial liability, in connection with our business. Some risk of environmental damage is, however, inherent in some of our operations and products, as it is with other companies engaged in similar businesses.

       We are and have been engaged in the handling, manufacture, use and disposal of many substances classified as hazardous or toxic by one or more regulatory agencies. We believe that, as a general matter, our policies, practices and procedures are properly designed to prevent unreasonable risk of environmental damage and personal injury, and that our handling, manufacture, use and disposal of these substances are in accord with environmental and safety laws and regulations. It is possible, however, that future knowledge or other developments, such as improved capability to detect substances in the environment or increasingly strict environmental laws and standards and enforcement policies, could bring into question our current or past handling, manufacture, use or disposal of these substances.

       Among other environmental requirements, we are subject to the federal superfund and similar state and foreign laws and regulations, under which we have been designated as a potentially responsible party that may be liable for cleanup costs associated with current and former operating sites and various hazardous waste sites, some of which are on the U.S. Environmental Protection Agency's superfund priority list. Although, under some court interpretations of these laws, there is a possibility that a responsible party might have to bear more than its proportional share of the cleanup costs if it is unable to obtain appropriate contribution from other responsible parties, we have not had to bear significantly more than our proportional share in multi-party situations taken as a whole.

       Further information, including the current status of significant environmental matters and the financial impact incurred for remediation of such environmental matters, if any, is included in “Item 7. Management's Discussion and Analysis of Financial Condition and Results of Operations,” in Note 21 of Notes to Financial Statements in “Item 8. Financial Statements and Supplementary Data,” and in “Item 1A. Risk Factors.”

Employees

       We have approximately 118,000 employees at December 31, 2006, of which approximately 56,000 were located in the United States.

9

Item 1A. Risk Factors

Cautionary Statement about Forward-Looking Statements

       We have described many of the trends and other factors that drive our business and future results in “Item 7. Management's Discussion and Analysis of Financial Condition and Results of Operations”, including the discussion of economic and other factors and areas of focus for 2007 for the Company and/or each of our segments. These sections and other parts of this report (including this Item 1A) contain “forward-looking statements” within the meaning of Section 21E of the Securities Exchange Act of 1934.

       Forward-looking statements are those that address activities, events or developments that management intends, expects, projects, believes or anticipates will or may occur in the future. They are based on management's assumptions and assessments in light of past experience and trends, current conditions, expected future developments and other relevant factors. They are not guarantees of future performance, and actual results, developments and business decisions may differ significantly from those envisaged by our forward-looking statements. We do not undertake to update or revise any of our forward-looking statements. Our forward-looking statements are also subject to risks and uncertainties that can affect our performance in both the near-and long-term. These forward-looking statements should be considered in light of the information included in this Form 10-K, including, in particular, the factors discussed below.

Risk Factors

       Our business, operating results, cash flows and financial condition are subject to various risks and uncertainties, including, without limitation, those set forth below, any one of which could cause our actual results to vary materially from recent results or from our anticipated future results.

Industry and economic conditions may adversely affect the market and operating conditions of our customers, which in turn can affect demand for our products and services and our results of operations.

       The operating results of our segments are impacted by general industry and economic conditions that can cause changes in spending and capital investment patterns, demand for our products and services and the level of our manufacturing costs. The operating results of our Aerospace segment, which generated 35 percent of our consolidated revenues in 2006, are directly tied to cyclical industry and economic conditions, including global demand for air travel as reflected in new aircraft production and/or the retirement of older aircraft, global flying hours, and business and general aviation aircraft utilization rates, as well as the level and mix of U.S. Government appropriations for defense and space programs (as further discussed in other risk factors below). The challenging operating environment faced by the commercial airline industry is expected to continue and may be influenced by a wide variety of factors including aircraft fuel prices, labor issues, airline consolidation, airline insolvencies, terrorism and safety concerns, and changes in regulations. Future terrorist actions or pandemic health issues could dramatically reduce both the demand for air travel and our Aerospace aftermarket sales and margins. The operating results of our Automation and Control Solutions (ACS) segment, which generated 35 percent of our consolidated revenues in 2006, are impacted by the level of global residential and commercial construction (including retrofits and upgrades), capital spending on building and process automation, industrial plant capacity utilization and expansion, and material price inflation. Specialty Materials' operating results, which generated 15 percent of our consolidated revenues in 2006, are impacted by global gross domestic product and capacity utilization for chemical, industrial, refining and petrochemical plants. Transportation Systems' operating results, which generated 15 percent of our consolidated revenues in 2006, are impacted by global production and demand for automobiles and trucks equipped with turbochargers, regulatory changes regarding automobile and truck emissions and consumer spending for automotive aftermarket and car care products.

10

Raw material price fluctuations and the ability of key suppliers to meet quality and delivery requirements can increase the cost of our products and services and impact our ability to meet commitments to customers.

       The cost of raw materials is a key element in the cost of our products, particularly in our Specialty Materials (fluorspar, benzene (the key component in phenol) and natural gas), Transportation Systems (nickel and steel) and Aerospace (nickel, titanium and other metals) segments. Our inability to offset material price inflation through increased prices to customers, long-term fixed price contracts with suppliers, productivity actions or through commodity hedges could adversely affect our results of operations.

       Our manufacturing operations are also highly dependent upon the delivery of materials by outside suppliers and their assembly of major components and subsystems used in our products in a timely manner and in full compliance with purchase order terms and conditions, quality standards, and applicable laws and regulations. We also depend in limited instances on sole source suppliers. Our suppliers may fail to perform according to specifications as and when required and we may be unable to identify alternate suppliers or to otherwise mitigate the consequences of their non-performance. The supply chains for our businesses could also be disrupted by external events such as natural disasters, pandemic health issues, terrorist actions, labor disputes or governmental actions. Our inability to fill our supply needs would jeopardize our ability to fulfill obligations under commercial and government contracts, which could, in turn, result in reduced sales and profits, contract penalties or terminations, and damage to customer relationships.

Our future growth is largely dependent upon our ability to develop new technologies that achieve market acceptance with acceptable margins.

       Our businesses operate in global markets that are characterized by rapidly changing technologies and evolving industry standards. Accordingly, our future growth rate depends upon a number of factors, including our ability to (i) identify emerging technological trends in our target end-markets, (ii) develop and maintain competitive products, (iii) enhance our products by adding innovative features that differentiate our products from those of our competitors, and (iv) develop, manufacture and bring products to market quickly and cost-effectively.

       Our ability to develop new products based on technological innovation can affect our competitive position and requires the investment of significant resources. These development efforts divert resources from other potential investments in our businesses, and they may not lead to the development of new technologies or products on a timely basis or that meet the needs of our customers as fully as competitive offerings. In addition, the markets for our products may not develop or grow as we currently anticipate. The failure of our technologies or products to gain market acceptance due to more attractive offerings by our competitors could significantly reduce our revenues and adversely affect our competitive standing and prospects.

       Protecting our intellectual property is critical to our innovation efforts. We own or are licensed under a large number of U.S. and foreign patents and patent applications, trademarks and copyrights. Our intellectual property rights may be challenged, invalidated or infringed upon by third parties or we may be unable to maintain, renew or enter into new licenses of third party proprietary intellectual property on commercially reasonable terms. In some non-U.S. countries, laws affecting intellectual property are uncertain in their application, which can affect the scope or enforceability of our patents and other intellectual property rights. Any of these events or factors could diminish or cause us to lose the competitive advantages associated with our intellectual property, subject us to judgments, penalties and significant litigation costs, and/or temporarily or permanently disrupt our sales and marketing of the affected products or services.

An increasing percentage of our sales and operations is in non-U.S. jurisdictions and is subject to the economic, political, regulatory and other risks of international operations.

       Our international operations, including U.S. exports, comprise a growing proportion of our operating results and our strategy calls for increasing sales to and operations in overseas markets, including developing markets such as China, India and the Middle East. In 2006, 48 percent of our total sales

11

(including products manufactured in the U.S. and in international locations) were outside of the U.S. including 28 percent in Europe and 10 percent in Asia. Risks related to international operations include exchange control regulations, wage and price controls, employment regulations, foreign investment laws, import and trade restrictions (including embargoes), changes in regulations regarding transactions with state-owned enterprises, nationalization of private enterprises, government instability and our ability to hire and maintain qualified staff in these regions. The cost of compliance with increasingly complex and often conflicting regulations worldwide can also impair our flexibility in modifying product, marketing, pricing or other strategies for growing our businesses, as well as our ability to improve productivity and maintain acceptable operating margins.

As we continue to grow our businesses internationally, our operating results could be effected by the relative strength of the European and Asian economies and the impact of exchange rate fluctuations. We do have a policy to reduce the risk of volatility through hedging activities, but such activities bear a financial cost and may not always be available to us and may not be successful in eliminating such volatility.

We may be required to recognize impairment charges for our long-lived assets.

       At December 31, 2006, the net carrying value of long-lived assets (property, plant and equipment, goodwill and other intangible assets) totaled approximately $14.5 billion. In accordance with generally accepted accounting principles, we periodically assess our long-lived assets to determine if they are impaired. Significant negative industry or economic trends, disruptions to our business, unexpected significant changes or planned changes in use of the assets, divestitures and market capitalization declines may result in impairments to goodwill and other long-lived assets. Future impairment charges could significantly affect our results of operations in the periods recognized. Impairment charges would also reduce our consolidated shareowners' equity and increase our debt-to-total-capitalization ratio, which could negatively impact our access to the public debt and equity markets.

A change in the level of U.S. Government defense and space funding or the mix of programs to which such funding is allocated could adversely impact sales of Aerospace's defense and space-related product and services.

       Sales of our defense and space-related products and services are largely dependent upon government budgets, particularly the U.S. defense budget. Sales as a prime contractor and subcontractor to the U. S. Department of Defense comprised approximately 27 and 10 percent of Aerospace and total sales, respectively, for the year ended December 31, 2006. Although U.S. defense spending increased in 2006 and is expected to increase again in 2007, we cannot predict the extent to which funding for individual programs will be included, increased or reduced as part of the 2008 and subsequent budgets ultimately approved by Congress, or be included in the scope of separate supplemental appropriations. We also cannot predict the impact of potential changes in priorities due to military transformation and planning and/or the nature of war-related activity on existing, follow-on or replacement programs. A shift in defense spending to programs in which we do not participate and/or reductions in funding for or termination of existing programs could adversely impact our results of operations.

As a supplier of military and other equipment to the U. S. Government, we are subject to unusual risks, such as the right of the U.S. Government to terminate contracts for convenience and to conduct audits and investigations of our operations and performance.

       In addition to normal business risks, companies like Honeywell that supply military and other equipment to the U.S. Government are subject to unusual risks, including dependence on Congressional appropriations and administrative allotment of funds, changes in governmental procurement legislations and regulations and other policies that reflect military and political developments, significant changes in contract scheduling, complexity of designs and the rapidity with which they become obsolete, necessity for constant design improvements, intense competition for U.S. Government business necessitating increases in time and investment for design and development, difficulty of forecasting costs and schedules when bidding on developmental and highly sophisticated technical work, and other factors characteristic of the

12

industry. Changes are customary over the life of U.S. Government contracts, particularly development contracts, and generally result in adjustments of contract prices.

Our contracts with the U.S. Government are subject to audits. Like many other government contractors, we have received audit reports that recommend downward price adjustments to certain contracts to comply with various government regulations. We have made adjustments and paid voluntary refunds in appropriate cases and may do so in the future.

U.S. Government contracts are subject to termination by the government, either for the convenience of the government or for our failure to perform under the applicable contract. In the case of a termination for convenience, we are typically entitled to reimbursement for our allowable costs incurred, plus termination costs and a reasonable profit. If a contract is terminated by the government for our failure to perform we could be liable for additional costs incurred by the government in acquiring undelivered goods or services from any other source and any other damages suffered by the government.

We are also subject to government investigations of business practices and compliance with government procurement regulations. If Honeywell or one of its businesses were charged with wrongdoing as a result of any such investigation or other government investigations (including violations of certain environmental or export laws), it could be suspended from bidding on or receiving awards of new government contracts pending the completion of legal proceedings. The U.S. Government also reserves the right to debar a contractor from receiving new government contracts for fraudulent, criminal or other egregious misconduct. Debarment generally does not exceed three years.

Changes in legislation or government regulations or policies can have a significant impact on our results of operations.

       The sales and margins of each of our segments are directly impacted by government regulations. Safety and performance regulations (including mandates of the Federal Aviation Administration and other similar international regulatory bodies requiring the installation of equipment on aircraft), product certification requirements and government procurement practices can impact Aerospace sales, research and development expenditures, operating costs and profitability. The demand for and cost of providing Automation and Control Solutions products, services and solutions can be impacted by fire, security, safety, health care and energy efficiency standards and regulations. Specialty Materials' results of operations can be affected by environmental (e.g. government regulation of fluorocarbons), safety and energy efficiency standards and regulations, while emissions and energy efficiency standards and regulations can impact the demand for turbochargers in our Transportation Systems segment.

Completed acquisitions may not perform as anticipated or be integrated as planned, and divestitures may not occur as planned.

       We regularly review our portfolio of businesses and pursue growth through acquisitions and seek to divest non-core businesses. We may not be able to complete transactions on favorable terms, on a timely basis or at all. In addition, our results of operations and cash flows may be adversely impacted by (i) the failure of acquired businesses to meet or exceed expected returns, (ii) the discovery of unanticipated issues or liabilities, (iii) the failure to integrate acquired businesses into Honeywell on schedule and/or to achieve synergies within the plan and timeframe, and/or (iv) the inability to dispose of non-core assets and businesses on satisfactory terms and conditions and within the expected time frame.

We cannot predict with certainty the outcome of litigation matters, government proceedings and other contingencies and uncertainties.

       We are subject to a number of lawsuits, investigations and disputes (some of which involve substantial amounts claimed) arising out of the conduct of our business, including matters relating to commercial transactions, government contracts, product liability (including asbestos), prior acquisitions and divestitures, employment, employee benefits plans, and environmental, health and safety matters. Resolution of these matters can be prolonged and costly, and the ultimate results or judgments are uncertain due to the inherent uncertainty in litigation and other proceedings. Moreover, our potential liabilities are subject to change over time due to new developments, changes in settlement strategy or the

13

impact of evidentiary requirements, and we may be required to pay damage awards or settlements, or become subject to damage awards or settlements, that could have a material adverse effect on our results of operations, cash flows and financial condition. While we maintain insurance for certain risks, the amount of our insurance coverage may not be adequate to cover the total amount of all insured claims and liabilities. It also is not possible to obtain insurance to protect against all our operational risks and liabilities. The incurrence of significant liabilities for which there is no or insufficient insurance coverage could adversely affect our results of operations, cash flows, liquidity and financial condition.

Our operations and the prior operations of predecessor companies expose us to the risk of material environmental liabilities.

       Mainly because of past operations and operations of predecessor companies, we are subject to potentially material liabilities related to the remediation of environmental hazards and to personal injuries or property damages that may be caused by hazardous substance releases and exposures. We have incurred remedial response and voluntary clean-up costs for site contamination and are a party to lawsuits and claims associated with environmental and safety matters, including past production of products containing toxic substances. Additional lawsuits, claims and costs involving environmental matters are likely to continue to arise in the future. We are subject to various federal, state, local and foreign government requirements regulating the discharge of materials into the environment or otherwise relating to the protection of the environment. These laws and regulations can impose substantial fines and criminal sanctions for violations, and require installation of costly equipment or operational changes to limit emissions and/or decrease the likelihood of accidental hazardous substance releases. We incur, and expect to continue to incur capital and operating costs to comply with these laws and regulations. In addition, changes in laws, regulations and enforcement of policies, the discovery of previously unknown contamination or new technology or information related to individual sites, or the imposition of new clean-up requirements or remedial techniques could require us to incur costs in the future that would have a negative effect on our financial condition or results of operations.

Our expenses include significant costs related to employee health and retiree health and income benefits.

       With approximately 118,000 employees, including 56,000 in the U.S, our expenses relating to employee health and retiree health and income benefits are significant. In recent years, we have experienced significant increases in certain of these costs, largely as a result of economic factors beyond our control, in particular, ongoing increases in health care costs well in excess of the rate of inflation. Continued increasing health-care costs, and changes in other assumptions used to calculate retiree health and income benefit expenses, may affect our future profitability.

Additional tax expense or additional tax exposures could affect our future profitability

       We are subject to income taxes in both the United States and various foreign jurisdictions, and our domestic and international tax liabilities are dependent upon the distribution of income among these different jurisdictions. In 2006, our tax expense represented 25.7 percent of our income before tax, and includes estimates of additional tax which may be incurred for tax exposures and reflects various estimates and assumptions, including assessments of future earnings of the Company that could effect the valuation of our deferred tax assets. Our future results could be adversely affected by changes in the effective tax rate as a result of a change in the mix of earnings in countries with differing statutory tax rates, changes in the overall profitability of the Company, changes in tax legislation, changes in the valuation of deferred tax assets and liabilities, and continuing assessments of our tax exposures.

Item 1B. Unresolved Staff Comments

       Not Applicable