UNITED STATES SECURITIES AND EXCHANGE COMMISSION
WASHINGTON, D.C. 20549
FORM 10-Q
| X |
QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE
SECURITIES EXCHANGE ACT OF 1934 |
|
| For the quarterly period ended June 30, 2003 |
or
| TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE | ||
| SECURITIES EXCHANGE ACT OF 1934 | ||
| For the transition period from to |
Commission File Number: 1-14303
AMERICAN AXLE & MANUFACTURING HOLDINGS, INC.
(313) 974-2000
(Exact name of registrant as specified in its charter)
Delaware
(State or other jurisdiction of
36-3161171
(I.R.S. Employer
incorporation or organization)
Identification No.)
1840 Holbrook Avenue, Detroit, Michigan
48212-3488
(Address of principal executive offices)
(Zip Code)
including area code)
Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes X No
Indicate by check mark whether the registrant is an accelerated filer (as defined in Rule 12b-2 of the Exchange Act). Yes X No
As of July 28, 2003, the latest practicable date, the number of shares of the registrant’s Common Stock, par value $0.01 per share, outstanding was 51,648,247 shares.
Website Access to Reports
American Axle & Manufacturing Holdings, Inc.’s internet website is www.aam.com . Our annual reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Exchange Act as well as beneficial ownership reports filed under Section 16(a) of the Exchange Act are available free of charge through our website as soon as reasonably practicable after they are electronically filed with, or furnished to, the Securities and Exchange Commission.
CAUTIONARY STATEMENTS
Certain statements in this Quarterly Report on Form 10-Q (“Quarterly Report”) are forward-looking in nature and relate to trends and events that may affect our future financial position and operating results. Such statements are made pursuant to the safe harbor provisions of the Private Securities Litigation Reform Act of 1995. The terms “will,” “expect,” “anticipate,” “intend,” “project” and similar words or expressions are intended to identify forward-looking statements. These statements speak only as of the date of this Quarterly Report. The statements are based on our current expectations, are inherently uncertain, are subject to risks and should be viewed with caution. Actual results and experience may differ materially from the forward-looking statements as a result of many factors, including, but not limited to:
| • | adverse changes in the economic conditions or political stability of our principal markets (particularly North America, Europe and South America); | ||
| • | reduced demand for our customers’ products, particularly light trucks and sport-utility vehicles (“SUVs”) produced by General Motors Corporation (“GM”) and DaimlerChrysler AG’s (“DaimlerChrysler”) heavy-duty Dodge Ram full-size pickup trucks (“Dodge Ram program”); | ||
| • | reduced purchases of our products by GM, DaimlerChrysler or other customers; | ||
| • | our ability and our customers’ ability to successfully launch new product programs; | ||
| • | our ability to respond to changes in technology or increased competition; | ||
| • | supply shortages or price fluctuations in raw materials, utilities or other operating supplies; | ||
| • | our ability to attract and retain key associates; | ||
| • | our ability to maintain satisfactory labor relations and avoid work stoppages; | ||
| • | our customers’ ability to maintain satisfactory labor relations and avoid work stoppages; | ||
| • | risks of noncompliance with environmental regulations; | ||
| • | liabilities arising from legal proceedings to which we are or may become a party or claims against us or our products; | ||
| • | availability of financing for working capital, capital expenditures, research and development or other general corporate purposes; | ||
| • | adverse changes in laws, government regulations or market conditions affecting our products or our customers’ products (including the Corporate Average Fuel Economy regulations); and | ||
| • | other unanticipated events and conditions that may hinder our ability to compete. |
It is not possible to foresee or identify all such factors and we make no commitment to update any forward-looking statement or to disclose any facts, events or circumstances after the date hereof that may affect the accuracy of any forward-looking statement.
1
PART I. FINANCIAL INFORMATION
Item 1. Financial Statements
AMERICAN AXLE & MANUFACTURING HOLDINGS, INC.
See accompanying notes to condensed consolidated financial statements.
2
AMERICAN AXLE & MANUFACTURING HOLDINGS, INC.
See accompanying notes to condensed consolidated financial statements.
3
AMERICAN AXLE & MANUFACTURING HOLDINGS, INC.
See accompanying notes to condensed consolidated financial statements.
4
AMERICAN AXLE & MANUFACTURING HOLDINGS, INC.
1. Organization, Basis of Presentation and Use of Estimates
Organization.
American Axle & Manufacturing Holdings, Inc. (“Holdings”)
and its subsidiaries (collectively, “we,” “our,” “us” or “AAM”), is a premier
Tier I supplier to the automotive industry and a worldwide leader in the
manufacture, engineering, design and validation of driveline systems and
related powertrain components and modules for light trucks, SUVs and passenger
cars. Driveline systems include components that transfer power from the
transmission and deliver it to the drive wheels. Our driveline and related
powertrain products include axles, modules, driveshafts, chassis and steering
components, driving heads, crankshafts, transmission parts and forged products.
In addition to our 14 locations in the United States (“U.S.”) (in Michigan,
New York and Ohio), we have offices and facilities in Brazil, England, Germany,
Japan, Mexico and Scotland.
Basis of Presentation.
We have prepared the accompanying interim
condensed consolidated financial statements in accordance with the instructions
to Form 10-Q under the Securities Exchange Act of 1934, as amended. These
condensed consolidated financial statements are unaudited but include all
adjustments which we consider necessary for a fair presentation of the
information set forth herein. Results of operations for the periods presented
are not necessarily indicative of the results for the full fiscal year.
The balance sheet at December 31, 2002 has been derived from the audited
consolidated financial statements at that date but does not include all of the
information and footnotes required by accounting principles generally accepted
in the United States of America for complete consolidated financial statements.
Use of estimates.
In order to prepare the accompanying interim condensed
consolidated financial statements, we are required to make estimates and
assumptions that affect the reported amounts and disclosures in our interim
condensed consolidated financial statements. Actual results could differ from
those estimates.
For further information, refer to the audited consolidated financial
statements and notes thereto included in our Annual Report on Form 10-K for the
year ended December 31, 2002 (“Annual Report”).
2. Inventories
We state our inventories at the lower of cost or market. The cost of our
U.S. inventories is determined principally using the last-in, first-out method
(“LIFO”). The cost of our foreign inventories and all of our indirect
inventories is determined principally using the first-in, first-out method
(“FIFO”). We classify indirect inventories, which include perishable tooling,
repair parts and other materials consumed in the manufacturing process but not
incorporated into our finished products, as raw materials.
5
AMERICAN AXLE & MANUFACTURING HOLDINGS, INC.
Inventories consist of the following:
3. Long-Term Debt
Long-term debt consists of the following:
The weighted average interest rate of our long-term debt outstanding was
5.5% at June 30, 2003 as compared to 5.8% at December 31, 2002.
The 9.75% Notes are unsecured senior subordinated obligations of American
Axle & Manufacturing, Inc. (“AAM Inc.”) and are fully and unconditionally
guaranteed by Holdings. Holdings is the survivor of a migratory merger with
American Axle & Manufacturing of Michigan, Inc. (“AAMM”) and has no significant
assets other than its 100% ownership of AAM Inc.
Holdings has no other subsidiaries other than AAM Inc. Holdings is restricted
from obtaining funds from AAM Inc. by dividend or loan pursuant to the terms of
the indenture relating to the 9.75% Notes.
We have sufficient availability to refinance all current maturities of
long-term debt through the Bank Credit Facilities and have, therefore,
classified such obligations as long-term debt as of June 30, 2003.
6
AMERICAN AXLE & MANUFACTURING HOLDINGS, INC.
4. Earnings Per Share (“EPS”)
The following table sets forth the computation of basic and diluted EPS:
5. Comprehensive Income
Comprehensive income consists of the following:
7
AMERICAN AXLE & MANUFACTURING HOLDINGS, INC.
6. Stock-Based Compensation
As permitted by FASB Statement No. 123,
“Accounting for Stock-Based
Compensation,”
we account for our employee stock options in accordance with APB
Opinion No. 25,
“Accounting for Stock Issued to Employees,”
and related
interpretations. Although it is our practice to grant options with no
intrinsic value, we measure compensation cost as the excess, if any, of the
market price of our common stock at the date of grant over the amount our
associates must pay to acquire the stock.
Had we determined compensation cost based upon the fair value of the
options at the grant date consistent with the alternative fair value method set
forth in FASB Statement No. 123, our net income and EPS would have been
adjusted to the pro forma amounts indicated as follows:
We estimated the fair value of our employee stock options granted in 2003
and 2002 on the date of grant using the Black-Scholes option-pricing model with
the following assumptions:
8
AMERICAN AXLE & MANUFACTURING HOLDINGS, INC.
7. Insurance Claims
On May 8, 2003, a tornado damaged a GM production facility in Oklahoma
City, Oklahoma and, as a result, GM did not maintain its production schedules
for that facility. The impact of this business interruption negatively
impacted our sales and gross margin in the second quarter of 2003 as we
continued to incur fixed charges and extra expenses subsequent to this event.
We anticipate full reimbursement from our insurance providers in 2003 for the
items mentioned above less a $2.5 million deductible and, therefore, have
recorded a receivable for costs incurred through June 30, 2003.
As explained more fully in our Annual Report, a fire occurred at our forge
operations in Detroit on July 14, 2002. There were no resulting injuries and
the fire did not affect our ability to meet customer demand. Our insurance
policies provide coverage for damage for property destroyed and incremental
costs incurred to maintain continuity of supply.
At June 30, 2003, we had $13.6 million of accounts receivable related to
these insurance claims as compared to $7.9 million at March 31, 2003 and $9.0
million at year-end 2002. The insurance settlement proceedings are ongoing as
planned and we anticipate final settlement of these claims to occur in 2003.
9
CONDENSED CONSOLIDATED STATEMENTS OF INCOME
(Unaudited)
Three months ended
Six months ended
June 30,
June 30,
2003
2002
2003
2002
(In millions, except per share data)
$
913.6
$
881.3
$
1,888.9
$
1,740.5
775.8
749.8
1,606.4
1,490.3
137.8
131.5
282.5
250.2
48.5
44.5
97.4
90.7
89.3
87.0
185.1
159.5
(12.0
)
(12.2
)
(24.5
)
(23.8
)
1.2
1.1
0.9
0.8
78.5
75.9
161.5
136.5
27.5
27.3
56.5
49.1
$
51.0
$
48.6
$
105.0
$
87.4
$
1.01
$
1.01
$
2.09
$
1.83
$
0.97
$
0.92
$
2.00
$
1.68
Table of Contents
CONDENSED CONSOLIDATED BALANCE SHEETS
June 30,
December 31,
2003
2002
(Unaudited)
(In millions)
$
33.8
$
9.4
390.8
335.7
160.2
174.6
30.8
37.3
14.9
9.1
630.5
566.1
1,591.2
1,553.5
6.2
10.9
150.2
150.2
51.9
55.0
$
2,430.0
$
2,335.7
$
332.8
$
327.5
127.7
157.2
58.3
50.5
518.8
535.2
670.3
734.1
73.7
52.0
334.7
310.8
1,597.5
1,632.1
0.5
0.5
300.6
279.0
589.3
484.3
(0.7
)
(0.7
)
(51.2
)
(51.2
)
(5.4
)
(6.8
)
(0.6
)
(1.5
)
832.5
703.6
$
2,430.0
$
2,335.7
Table of Contents
CONDENSED CONSOLIDATED STATEMENTS OF CASH FLOWS
(Unaudited)
Six months ended
June 30,
2003
2002
(In millions)
$
105.0
$
87.4
80.4
66.3
20.5
18.3
17.0
2.6
0.5
0.5
(54.8
)
(42.4
)
15.0
(3.5
)
(16.3
)
47.7
26.6
12.6
193.9
189.5
(110.4
)
(116.8
)
(3.0
)
(5.1
)
(113.4
)
(121.9
)
(39.7
)
(81.8
)
(25.6
)
(3.0
)
8.7
7.9
(56.6
)
(76.9
)
0.5
(0.5
)
24.4
(9.8
)
9.4
12.3
$
33.8
$
2.5
$
26.5
$
31.6
$
10.8
$
20.3
Table of Contents
June 30, 2003
Table of Contents
NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS (CONTINUED)
June 30,
December 31,
2003
2002
(In millions)
$
160.7
$
181.5
35.8
25.9
196.5
207.4
(10.4
)
(10.6
)
(25.9
)
(22.2
)
$
160.2
$
174.6
June 30,
December 31,
2003
2002
(In millions)
$
—
$
—
349.0
372.0
349.0
372.0
—
30.0
298.7
298.6
22.6
33.5
$
670.3
$
734.1
Table of Contents
NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS (CONTINUED)
Three months ended
Six months ended
June 30,
June 30,
2003
2002
2003
2002
(In millions, except per share data)
$
51.0
$
48.6
$
105.0
$
87.4
50.5
48.3
50.2
47.8
2.3
4.5
2.3
4.3
52.8
52.8
52.5
52.1
$
1.01
$
1.01
$
2.09
$
1.83
$
0.97
$
0.92
$
2.00
$
1.68
Three months ended
Six months ended
June 30,
June 30,
2003
2002
2003
2002
(In millions)
$
51.0
$
48.6
$
105.0
$
87.4
(0.1
)
(0.2
)
0.9
0.2
1.5
(1.1
)
1.4
(1.3
)
$
52.4
$
47.3
$
107.3
$
86.3
Table of Contents
NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS (CONTINUED)
Three months ended
Six months ended
June 30,
June 30,
2003
2002
2003
2002
(In millions, except per share data)
$
51.0
$
48.6
$
105.0
$
87.4
(3.5
)
(2.8
)
(6.8
)
(5.1
)
$
47.5
$
45.8
$
98.2
$
82.3
$
1.01
$
1.01
$
2.09
$
1.83
$
0.94
$
0.95
$
1.96
$
1.72
$
0.97
$
0.92
$
2.00
$
1.68
$
0.91
$
0.88
$
1.90
$
1.59
2003
2002
47.55
%
53.79
%
3.50
%
4.60
%
None
None
7 years
7 years
$
12.69
$
14.51
Table of Contents
NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS (CONTINUED)
Table of Contents
Item 2. Management’s Discussion and Analysis of Financial Condition and Results of Operations
This management’s discussion and analysis (“MD&A”) should be read in conjunction with the Unaudited Condensed Consolidated Financial Statements and notes thereto appearing elsewhere in this Quarterly Report and our Annual Report for the year ended December 31, 2002.
Unless the context otherwise requires, references to “we,” “our,” “us” or “AAM” shall mean collectively (i) American Axle & Manufacturing Holdings, Inc. (“Holdings”), a Delaware corporation, and (ii) American Axle & Manufacturing, Inc. (“AAM Inc.”), a Delaware corporation, and its direct and indirect subsidiaries. Holdings has no other subsidiaries other than AAM Inc.
COMPANY OVERVIEW
We are a premier Tier I supplier to the automotive industry and a worldwide leader in the manufacture, engineering, design and validation of driveline systems and related powertrain components and modules for light trucks, SUVs and passenger cars. Driveline systems include components that transfer power from the transmission and deliver it to the drive wheels. Our driveline and related powertrain products include axles, modules, driveshafts, chassis and steering components, driving heads, crankshafts, transmission parts and forged products. In addition to our 14 locations in the U.S. (in Michigan, New York and Ohio), we have offices and facilities in Brazil, England, Germany, Japan, Mexico and Scotland.
We are the principal supplier of driveline components to GM for its rear-wheel drive (“RWD”) light trucks and SUVs manufactured in North America, supplying substantially all of GM’s rear axle and front four-wheel drive/all-wheel drive (“4WD/AWD”) axle requirements for these vehicle platforms in the second quarter of 2003. As a result of our Component Supply Agreement (“CSA”) and Lifetime Program Contracts (“LPCs”) with GM, we are the sole-source supplier to GM for certain axles and other driveline products for the life of each GM vehicle program covered by a LPC.
We sell most of our products under long-term contracts with prices established at the time the contracts were executed. Some of our contracts require us to reduce our prices in subsequent years and most of our contracts allow us to negotiate price increases for engineering changes. Price reductions under long-term contracts are a common practice in the automotive industry. We do not believe that price reductions offered to our customers will have a material adverse impact on our future operating results because we intend to offset such price reductions through purchased material cost reductions and other productivity improvements.
Substantially all of our sales to GM are made pursuant to the LPCs. The LPCs have terms equal to the lives of the relevant vehicle programs or their respective derivatives, which typically run 6 to 12 years, and require us to remain competitive with respect to technology, design and quality. We will compete for future GM business upon the termination of the LPCs or the CSA. In the second quarter of 2003, we executed a LPC for the GMT-900 program, which is the successor to the GMT-800 program. The GMT-900 program is expected to run through 2012.
10
Sales to GM increased less than 1% to $1,553.7 million for the six months ended June 30, 2003 (“first half of 2003”) as compared to $1,551.0 million for the six months ended June 30, 2002 (“first half of 2002”). Sales to GM represented approximately 82% of our total net sales in the first half of 2003 as compared to 89% in the first half of 2002 and 86% for the full year 2002.
We also supply driveline systems and other related components to DaimlerChrysler, Ford Motor Company, The Volvo Group, PACCAR Inc. and other original equipment manufacturers (“OEMs”) and Tier I supplier companies such as Delphi Corporation, Dana Corporation, New Venture Gear, Inc. and The Timken Company. Our sales to customers other than GM increased approximately 77% to $335.2 million in the first half of 2003 as compared to $189.5 million in the first half of 2002. This significant growth in sales to customers other than GM was primarily due to our successful launch in the second half of 2002 of new driveline system products to support the Dodge Ram program partially offset by a reduction in sales to Visteon Corporation. As a result of the Dodge Ram program, we expect our sales to DaimlerChrylser to be approximately 10% of our total net sales in 2003 as compared to approximately 4% in 2002 and less than 1% in 2001 and all previous years.
RESULTS OF OPERATIONS — THREE MONTHS ENDED JUNE 30, 2003 COMPARED TO THREE
MONTHS ENDED JUNE 30, 2002
Net Sales . Net sales increased to $913.6 million in the second quarter of 2003 as compared to $881.3 million in the second quarter of 2002. This 3.7% increase in sales in the second quarter of 2003 compares to an estimated 9% decrease in North American light vehicle production and nearly a 4% decrease in GM light truck production. Sales were positively impacted by the launch of the HUMMER H2 in the third quarter of 2002 offset by the end of our supply contract related to certain products supporting GM’s full-size van platform and the discontinuance of the Pontiac Firebird/Chevrolet Camaro program. A 76% increase in sales to customers other than GM also positively impacted our sales growth in the second quarter of 2003 primarily due to our new driveline system products supporting the Dodge Ram program.
Our content-per-vehicle (as measured for our products supporting GM’s North American light truck platforms and the DaimlerChrysler Dodge Ram platform) increased approximately 7% to $1,174 in the second quarter of 2003 as compared to $1,101 in the second quarter of 2002. The penetration rate of our 4WD/AWD systems increased to 61.0% in the second quarter of 2003 as compared to 55.3% in the second quarter of 2002. We benefit from increased 4WD/AWD penetration because we are able to sell two axles on a 4WD/AWD vehicle versus one on a traditional light truck or SUV. These gains were primarily a result of our new driveline system products supporting the Dodge Ram program and the HUMMER H2.
Gross Profit. Gross profit increased approximately 5% to $137.8 million in the second quarter of 2003 as compared to $131.5 million in the second quarter of 2002. Gross margin increased to 15.1% of sales in the second quarter of 2003 as compared to 14.9% in the second quarter of 2002. The increases in gross profit and gross margin were primarily due to the impact of higher production volumes, productivity gains and tight cost controls, including reductions in purchased material costs. These productivity gains were partially offset by a $5.1 million charge for an early retirement program accepted by approximately 150 associates in the second quarter of 2003.
11
On May 8, 2003, a tornado damaged a GM production facility in Oklahoma City, Oklahoma and, as a result, GM did not maintain its production schedules for that facility. The impact of this business interruption negatively impacted our sales and gross margin in the second quarter of 2003 as we continued to incur fixed charges and extra expenses subsequent to this event. We anticipate full reimbursement from our insurance providers in 2003 for the items mentioned above less a $2.5 million deductible and, therefore, have recorded a receivable for costs incurred through June 30, 2003.
Selling, General and Administrative Expenses (“SG&A”). SG&A (including research and development (“R&D”)) increased to $48.5 million or 5.3% of net sales in the second quarter of 2003 as compared to $44.5 million or 5.0% of net sales in the second quarter of 2002. The increase in SG&A was a result of increased R&D and higher profit-sharing accruals resulting from our increased profitability as compared to the second quarter of 2002.
R&D increased approximately 12% to $15.0 million in the second quarter of 2003 as compared to $13.4 million in the second quarter of 2002. The focus of this increasing investment continues to be our R&D initiatives in fuel economy, customer satisfaction and meeting marketplace needs. Through these initiatives, the development of new product, process and systems technologies to improve the efficiency and flexibility of our operations allows us to continue to deliver innovative new products, modules and integrated driveline systems to our customers. Examples of such new products include our family of power transfer units developed for AWD passenger cars and the growing crossover vehicle segment, our torque biasing differentials, which operate mechanically or electronically, and our chassis modules, which represent the latest in OEM assembly plant efficiency by utilizing just four bolts to install the pre-assembled chassis module (consisting of the driveline components, the suspension components and the sub frame or cradle) in the vehicle without changes to the vehicle frame. As a result of our commitment to these types of R&D initiatives, we generated nearly 80% of our total sales in the second quarter of 2003 from new axle and related powertrain system components introduced by us since July 1998.
Operating Income. Operating income increased approximately 3% to $89.3 million in the second quarter of 2003 as compared to $87.0 million in the second quarter of 2002. Operating margin decreased to 9.8% in the second quarter of 2003 as compared to 9.9% in the second quarter of 2002. The increase in operating income was primarily due to the factors discussed above relating to the increase in gross profit, offset by higher SG&A expenses.
Net Interest Expense. Net interest expense was $12.0 million in the second quarter of 2003 as compared to $12.2 million in the second quarter of 2002. Gross interest expense decreased as a result of lower average interest rates in effect during the second quarter 2003 and lower average outstanding borrowings. However, capitalized interest was $1.3 million less in the second quarter of 2003 as compared to the second quarter of 2002 due to the impact of lower construction in process. The net impact of these factors resulted in lower net interest expense in the second quarter of 2003.
Income Tax Expense. Income tax expense was $27.5 million in the second quarter of 2003 as compared to $27.3 million in the second quarter of 2002. Our effective income tax rate was 35.0% in the second quarter of 2003, 36.0% in the second quarter of 2002 and 35.7% for the full-year 2002. The decrease in our effective tax rate from year-end 2002 was primarily due to realization of state tax credits offset by a reduction in Federal tax credits.
12
Net Income and Earnings Per Share. Net income increased approximately 5% to $51.0 million in the second quarter of 2003 as compared to $48.6 million in the second quarter of 2002. Diluted earnings per share increased to $0.97 in the second quarter of 2003 as compared to $0.92 in the second quarter of 2002.
Earnings Before Interest Expense, Income Taxes, Depreciation and Amortization (“EBITDA”). EBITDA increased approximately 7% to $131.1 million in the second quarter of 2003 as compared to $122.4 million in the second quarter of 2002. EBITDA margin increased to 14.3% in the second quarter of 2003 as compared to 13.9% in the second quarter of 2002. The increases in EBITDA and EBITDA margin were primarily due to the factors discussed above relating to the increase in gross profit, partly offset by higher SG&A expenses.
The following table summarizes the calculation of EBITDA:
Three months ended
June 30,
2003
2002
(In millions)
$
51.0
$
48.6
12.2
12.3
27.5
27.3
40.4
34.2
$
131.1
$
122.4
| (1) | We believe that EBITDA is a meaningful measure of performance as it is commonly utilized in our industry to analyze operating performance, liquidity and entity valuation. EBITDA should not be construed as income from operations, net income or cash flow from operating activities as determined by accounting principles generally accepted in the United States of America. Other companies may calculate EBITDA differently. |
RESULTS OF OPERATIONS — SIX MONTHS ENDED JUNE 30, 2003 COMPARED TO SIX MONTHS
ENDED JUNE 30, 2002
Net Sales . Net sales increased to $1,888.9 million in the first half of 2003 as compared to $1,740.5 million in the first half of 2002. This 8.5% increase in sales in the first half of 2003 compares to an estimated 4% decrease in North American light vehicle production and a 4% increase in GM light truck production. Sales were positively impacted by the launch of the HUMMER H2 in the third quarter of 2002 offset by a reduction in sales to Visteon Corporation, the end of our supply contract related to certain products supporting GM’s full-size van platform and the discontinuance of the Pontiac Firebird/Chevrolet Camaro program. A 77% increase in sales to customers other than GM also positively impacted our sales growth in the first half of 2003 primarily due to our new driveline system products supporting the Dodge Ram program.
Our content-per-vehicle increased approximately 5% to $1,169 in the first half of 2003 as compared to $1,118 in the first half of 2002. The penetration rate of our 4WD/AWD systems increased to 61.2% in the first half of 2003 as compared to 57.3% in the first half of 2002. These gains were primarily a result of our new driveline system products supporting the Dodge Ram program and the HUMMER H2.
13
Gross Profit. Gross profit increased approximately 13% to $282.5 million in the first half of 2003 as compared to $250.2 million in the first half of 2002. Gross margin increased to 15.0% of sales in the first half of 2003 as compared to 14.4% in the first half of 2002. The increases in gross profit and gross margin were primarily due to the impact of higher production volumes, productivity gains and tight cost controls, including reductions in purchased material costs. These productivity gains were partially offset by $8.6 million in charges for an early retirement program accepted by approximately 250 associates in the first half of 2003.
On May 8, 2003, a tornado damaged a GM production facility in Oklahoma City, Oklahoma and, as a result, GM did not maintain its production schedules for that facility. The impact of this business interruption negatively impacted our sales and gross margin in the second half of 2003 as we continued to incur fixed charges and extra expenses subsequent to this event. We anticipate full reimbursement from our insurance providers in 2003 for the items mentioned above less a $2.5 million deductible and, therefore, have recorded a receivable for costs incurred through June 30, 2003.
Selling, General and Administrative Expenses. SG&A (including R&D) increased to $97.4 million or 5.2% of net sales in the first half of 2003 as compared to $90.7 million or 5.2% of net sales in the first half of 2002. The increase in SG&A was a result of increased R&D and higher profit-sharing accruals resulting from our increased profitability as compared to the first half of 2002.
R&D increased approximately 12% to $30.4 million in the first half of 2003 as compared to $27.1 million in the first half of 2002. The increase in our R&D in the first half of 2003 as compared to the first half of 2002 was primarily due to the factors previously discussed relating to the increase in R&D in the second quarter of 2003. We generated nearly 80% of our total sales in the first half of 2003 from new axle and related powertrain system components introduced by us since July 1998.
Operating Income. Operating income increased approximately 16% to $185.1 million in the first half of 2003 as compared to $159.5 million in the first half of 2002. Operating margin increased to 9.8% in the first half of 2003 as compared to 9.2% in the first half of 2002. The increases in operating income and operating margin were primarily due to the factors discussed above relating to the increase in gross profit and gross margin, partly offset by higher SG&A expenses.
Net Interest Expense. Net interest expense was $24.5 million in the first half of 2003 as compared to $23.8 million in the first half of 2002. Gross interest expense increased as a result of lower average interest rates in effect during the first half of 2003 and lower average outstanding borrowings. However, capitalized interest was $3.4 million less in the first half of 2003 as compared to the first half of 2002 due to the impact of lower construction in process. The net impact of these factors resulted in higher net interest expense in the first half of 2003.
Income Tax Expense. Income tax expense was $56.5 million in the first half of 2003 as compared to $49.1 million in the first half of 2002. Our effective income tax rate was 35.0% in the first half of 2003, 36.0% in the first half of 2002 and 35.7% for the full-year 2002. The decrease in our effective tax rate from year-end 2002 was primarily due to realization of state tax credits offset by a reduction in Federal tax credits.
14
Net Income and Earnings Per Share. Net income increased approximately 20% to $105.0 million in the first half of 2003 as compared to $87.4 million in the first half of 2002. Diluted earnings per share increased to $2.00 in the first half of 2003 as compared to $1.68 in the first half of 2002.
Earnings Before Interest Expense, Income Taxes, Depreciation and Amortization. EBITDA increased approximately 18% to $266.8 million in the first half of 2003 as compared to $226.9 million in the first half of 2002. EBITDA margin increased to 14.1% in the first half of 2003 as compared to 13.0% in the first half of 2002. The increases in EBITDA and EBITDA margin were primarily due to the factors discussed above relating to the increase in gross profit and gross margin, partly offset by higher SG&A expenses.
The following table summarizes the calculation of EBITDA:
Six months ended
June 30,
2003
2002
(In millions)
$
105.0
$
87.4
24.9
24.1
56.5
49.1
80.4
66.3
$
266.8
$
226.9
| (1) | We believe that EBITDA is a meaningful measure of performance as it is commonly utilized in our industry to analyze operating performance, liquidity and entity valuation. EBITDA should not be construed as income from operations, net income or cash flow from operating activities as determined by accounting principles generally accepted in the United States of America. Other companies may calculate EBITDA differently. |
LIQUIDITY AND CAPITAL RESOURCES
Our primary liquidity needs are to fund capital expenditures, service debt and support working capital requirements in our business. We rely principally upon operating cash flow and borrowings under our primary bank credit facilities to meet these needs. We believe that cash flow available from these sources will be sufficient to meet our projected capital expenditures, debt service obligations and working capital requirements in the foreseeable future.
Cash Flow from Operations . Net cash provided by operating activities was $193.9 million in the first half of 2003 as compared to $189.5 million in the first half of 2002. Our operating cash flow before changes in operating assets and liabilities generated $48.3 million of additional operating cash flow in the first half of 2003 as compared to the first half of 2002.
The net cash impact associated with our pension and postretirement benefit plans increased to a source of cash of $17.0 million in the first half of 2003 as compared to $2.6 million in the first half of 2002. This increase in cash flow primarily reflects an increase in our noncash book expense in 2003, partially offset by an increase in the funding of our pension liabilities of $32.0 million in the first half of 2003. We contributed $25.0 million to our pension plans in the first half of 2002.
15
Accounts receivable increased $55.1 million at June 30, 2003 as compared to year-end 2002. This increase was primarily due to increased sales activity in the second quarter of 2003 as compared to the fourth quarter of 2002. Our accounts receivable allowances were $4.3 million at June 30, 2003 as compared to $5.4 million at year-end 2002. These allowances were reduced in the second quarter of 2003 to recognize the settlement of various customer balances that were specifically reserved at year-end 2002.
Inventories at June 30, 2003 reflect decreases as compared to year-end 2002 levels primarily due to a more efficient use of our raw materials. There were no significant changes in our inventory valuation allowances affecting our operating results in the first half of 2003.
The net cash impact associated with our current liabilities was a use of cash of $16.3 million in the first half of 2003 as compared to a source of cash of $47.7 million in the first half of 2002. The most significant factor contributing to our increased funding of our current liabilities was higher profit sharing payouts in the first half of 2003 due to our increased profitability in 2002. Other factors affecting our increased funding of our current liabilities in the first half of 2003 were lower inventory purchases and reduced supplier holdbacks on construction in process.
Our cash flow from operating activities also benefited in the first half of 2003 from accelerated tax depreciation, the collection of certain state tax credits and the utilization of federal tax credits.
Investing Activities . Capital expenditures were $110.4 million in the first half of 2003 as compared to $116.8 million in the first half of 2002. We expect our capital spending to be between $225 million and $250 million in 2003, which is a normalized level of capital investment for us because we have substantially completed the process of rebuilding our facilities to support our long-term production requirements.
Our largest capital projects in 2003 include expenditures to support the model year 2004 launch of the all-new GM mid-sized pickup trucks (Chevrolet Colorado and GMC Canyon), construction of our new world headquarters in Detroit, Michigan and the expansion of our Technical Center in Rochester Hills, Michigan. In 2003, we will also make our initial investments for equipment to support the launch of an all-new 2005 model year SUV, continue to support new production programs and facility expansion projects at AAM do Brasil and to increase capacity and fund productivity programs in Detroit and Guanajuato Gear & Axle in support of both GM and DaimlerChrysler.
Financing Activities . Net cash used in financing activities was $56.6 million in the first half of 2003 as compared to $76.9 million in the first half of 2002. Total long-term debt outstanding decreased $63.8 million in the first half of 2003 to $670.3 million as compared to $734.1 million at year-end 2002. The primary driver for this decrease is our improved operating cash flow.
We continue to project free cash flow in excess of $200 million for the full-year 2003 to reduce outstanding borrowings. Free cash flow is defined as net cash flow provided by operating activities less capital expenditures. We believe free cash flow is a meaningful measure of our ability to repay debt. Other companies may calculate free cash flow differently.
16
Under the terms of the Bank Credit Facilities, we are subject to mandatory prepayment terms if our annual operating cash flows exceed what is required to meet our current debt service and capital expenditure obligations. Based on the applicable covenant formula specified in the Bank Credit Facilities, we made a mandatory, forward-order prepayment of $23.0 million on March 31, 2003. After reflecting this prepayment, $349.0 million was outstanding under the Bank Credit Facilities at June 30, 2003, all of which was drawn on the Term Loan, and we had additional borrowing capacity of $378.8 million under the Revolver.
At June 30, 2003, $153.0 million was available to us under the Receivables Facility which expires in the fourth quarter of 2003. We are currently evaluating options available to us to replace this facility.
At June 30, 2003, $34.0 million was available under our uncommitted money market lines of credit.
The weighted average interest rate of our long-term debt outstanding was 5.5% at June 30, 2003 as compared to 5.8% at December 31, 2002.
As market conditions warrant and in conjunction with our debt management strategy, we may, from time to time, purchase a portion of our debt securities in privately negotiated or open market transactions.
Off-Balance Sheet Financing and Contractual Obligations. Our off-balance sheet financing relates principally to operating leases for certain facilities and manufacturing machinery and equipment. Pursuant to these operating leases, most of which were initiated prior to year-end 1999, we have the opportunity to purchase underlying machinery and equipment at specified buy-out dates. We exercised our purchase options for $3.0 million of such lease buy-outs in the first half of 2003 as compared to $5.1 million in the first half of 2002 and $45.2 million for the full-year 2002. The manufacturing equipment purchased in these transactions in 2003 was originally sold under sale-leaseback agreements in 1996. Remaining lease renewal or repurchase options are approximately $106 million in 2006.
The following table summarizes our payments due on our contractual
obligations
(1)
:
Long-term debt and
capital lease
Purchase
Total contractual
obligations
Operating leases
commitments
obligations
(In millions)
$
2.7
$
19.0
$
82.3
$
104.0
0.3
26.5
—
26.8
174.1
28.2
—
202.3
191.6
29.0
—
220.6
—
28.9
—
28.9
0.1
29.7
—
29.8
301.5
38.7
—
340.2
$
670.3
$
200.0
$
82.3
$
952.6
| (1) | This table excludes the options to purchase equipment under operating leases at the end of the contractual lease terms. | |
| (2) | 2003 represents our contractual obligations from July 1, 2003 to December 31, 2003. |
17
INSURANCE CLAIMS
On May 8, 2003, a tornado damaged a GM production facility in Oklahoma City, Oklahoma and, as a result, GM did not maintain its production schedules for that facility. The impact of this business interruption negatively impacted our sales and gross margin in the second quarter of 2003 as we continued to incur fixed charges and extra expenses subsequent to this event. We anticipate full reimbursement from our insurance providers in 2003 for the items mentioned above less a $2.5 million deductible and, therefore, have recorded a receivable for costs incurred through June 30, 2003.
As explained more fully in our Annual Report, a fire occurred at our forge operations in Detroit on July 14, 2002. There were no resulting injuries and the fire did not affect our ability to meet customer demand. Our insurance policies provide coverage for damage for property destroyed and incremental costs incurred to maintain continuity of supply.
At June 30, 2003, we had $13.6 million of accounts receivable related to these insurance claims as compared to $7.9 million at March 31, 2003 and $9.0 million at year-end 2002. The insurance settlement proceedings are ongoing as planned and we anticipate final settlement of these claims to occur in 2003.
CYCLICALITY AND SEASONALITY
Our operations are cyclical because they are directly related to worldwide automotive production, which is itself cyclical and dependent on general economic conditions and other factors. Our business is also moderately seasonal as our major OEM customers historically have a two-week shutdown of operations in July and an approximate one-week shutdown in December. In addition, our OEM customers have historically incurred lower production rates in the third quarter as model changes enter production. Accordingly, our third quarter and fourth quarter results may reflect these trends.
LITIGATION AND ENVIRONMENTAL REGULATIONS
We are involved in various legal proceedings incidental to our business. Although the outcome of these matters cannot be predicted with certainty, we do not believe that any of these matters, individually or in the aggregate, will have a material adverse effect on our financial condition, results of operations or cash flow.
GM has agreed to indemnify and hold us harmless from certain environmental issues identified as potential areas of environmental concern at March 1, 1994. GM has also agreed to indemnify us, under certain circumstances, for up to 10 years from such date with respect to certain pre-closing environmental conditions. Based on our assessment of costs associated with our environmental responsibilities, including recurring administrative costs, capital expenditures and other compliance costs, we do not expect such costs to have a material effect on our financial condition, results of operations, cash flow or competitive position in the foreseeable future.
18
EFFECT OF NEW ACCOUNTING STANDARDS
In May 2003, The Financial Accounting Standards Board (“FASB”) issued Statement No. 149, “ Amendment of Statement 133 on Derivative Instruments and Hedging Activities.” FASB Statement No. 149 amends and clarifies accounting for derivative instruments and hedging activities under Statement 133. The Statement is effective for contracts entered into or modified after June 30, 2003 and for hedging relationships designated after June 30, 2003 with this guidance applied prospectively. This Statement had no impact on our results of operations or financial position at June 30, 2003 and we do not expect this Statement to have a material impact on our consolidated financial statements.
In May 2003, The FASB issued Statement No. 150, “ Accounting for Certain Financial Instruments with Characteristics of Both Liabilities and Equity .” FASB Statement No. 150 affects the accounting for mandatorily redeemable shares, options and forward purchase contracts that require the issuer to repurchase shares and certain obligations that can be settled in shares. The Statement also requires disclosures about alternatives in the settlement of instruments and capital structure of the entities. The Statement is effective for all financial instruments entered into or modified after May 31, 2003 and otherwise is effective at the beginning of the first interim period after June 15, 2003. This Statement had no impact on our results of operations or financial position at June 30, 2003 and we do not expect this Statement to have a material impact on our consolidated financial statements.
19
Item 3. Quantitative and Qualitative Disclosures About Market Risk
MARKET RISK
Our business and financial results are affected by fluctuations in world financial markets, including interest rates and currency exchange rates. Our hedging policy has been developed to manage these risks to an acceptable level based on management’s judgment of the appropriate trade-off between risk, opportunity and cost. We do not hold financial instruments for trading or speculative purposes.
Currency Exchange Risk. Because most of our business is denominated in U.S. dollars, we do not currently have significant exposures relating to currency exchange risks. We had currency forward contracts with a notional amount of approximately $12.8 million outstanding at June 30, 2003. Future business operations and opportunities, including the expansion of our business outside North America, may further increase the risk that cash flows resulting from these activities may be adversely affected by changes in currency exchange rates. If and when appropriate, we intend to manage these risks by utilizing local currency funding of these expansions and various types of foreign exchange forward contracts.
Interest Rate Risk. We are exposed to variable interest rates on our Bank Credit Facilities, the Receivables Facility and a portion of our sale-leaseback financing. The pre-tax earnings and cash flow impact of a one-percentage-point increase in interest rates (approximately 16.5% of our weighted average interest rate at December 31, 2002) on our long-term debt outstanding at year-end 2002 would be approximately $3.9 million.
At year-end 2002, we had hedged a portion of our interest rate risk by entering into interest rate swaps with a notional amount of approximately $37.1 million. These interest rate swaps convert variable financing based on 3-month LIBOR rates into fixed U.S. dollar rates varying from 6.88% to 6.96%. We have designated the interest rate swaps as effective cash flow hedges of the related debt and lease obligations and, accordingly, we have reflected the net cost of such agreements as an adjustment to interest expense over the lives of the debt and lease agreements.
Item 4. Controls and Procedures
Our Chief Executive Officer and Chief Financial Officer, with the participation of our management, have evaluated the effectiveness of the design and operation of our disclosure controls and procedures, as defined in Rule 13a-15(e) under the Securities Exchange Act of 1934 (the “Exchange Act”), as of the end of the period covered by this Quarterly Report. Based upon that evaluation, our Chief Executive Officer and Chief Financial Officer have concluded that our disclosure controls and procedures are effective in timely alerting them to material information required to be included in our periodic Exchange Act filings.
There have been no significant changes to our internal controls or other factors that could significantly affect these controls subsequent to the date of their evaluation.
20
PART II. OTHER INFORMATION
Item 4. Submission of Matters to a Vote of Security Holders
Our annual meeting of stockholders was held on May 1, 2003 for the purpose
of electing directors and attending to any other business properly presented at
the meeting. Proxies for the meeting were solicited pursuant to Section 14(a)
of the Securities Exchange Act of 1934 and there was no solicitation in
opposition to management’s solicitation. Each of management’s nominees for
directors as listed in the proxy statement were elected with the number of
votes set forth below:
Number of Votes
Abstained/
In Favor
Withheld
46,096,195
1,294,532
45,982,049
1,408,678
40,457,788
6,932,939
In addition to the directors listed above, returning members of the Board of Directors include:
Class II Directors — Term Expires in 2004:
Robert L. Friedman
B.G. Mathis
Bret D. Pearlman
Chairman of the Board of Directors, Class III Director — Term Expires in 2005:
Richard E. Dauch
Class III Directors — Term Expires in 2005:
Larry W. McCurdy
John P. Reilly
Item 6. Exhibits and Reports on Form 8-K
| (a) | Exhibits | ||
| Exhibits required by Item 601 of Regulation S-K are listed in the Exhibit Index hereto. | |||
| (b) | Reports on Form 8-K | ||
| On May 2, 2003, we filed a Current Report on Form 8-K pursuant to Item 12 reporting that we issued a press release containing our financial results for the quarter ended March 31, 2003. | |||
21
SIGNATURES
Pursuant to the requirements of the Securities Exchange Act of 1934, as amended, the registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.
| AMERICAN AXLE & MANUFACTURING HOLDINGS, INC. | ||||
| (Registrant) | ||||
| Date: August 1, 2003 | By: /s/ Robin J. Adams | |||
| Robin J. Adams | ||||
| Executive Vice President — Finance & | ||||
| Chief Financial Officer | ||||
| (also in the capacity of Chief Accounting Officer) | ||||
22
EXHIBIT INDEX
(All other exhibits are not applicable.)
Number
Description of Exhibit
*10.51
Lifetime Program Contract for GMT-900 Products, between
GM and AAM, Inc.**
*12.01
Statement of Computation of Ratio of Earnings to Fixed Charges
*31.1
Certification of Richard E. Dauch, Co-Founder, Chairman of the Board
& Chief Executive Officer Pursuant to Rule 13a-14(a) of the Securities
Exchange Act
*31.2
Certification of Robin J. Adams, Executive Vice President — Finance
& Chief Financial Officer Pursuant to Rule 13a-14(a) of the Securities
Exchange Act
*32.1
Certifications of Richard E. Dauch, Co-Founder, Chairman of the Board
& Chief Executive Officer and Robin J. Adams, Executive Vice
President — Finance & Chief Financial Officer Pursuant to 18 U.S.C.
Section 1350, as
Adopted Pursuant to Section 906 of the Sarbanes-Oxley Act of 2002
| * | Filed herewith | |
| ** | Shown only in the original filed with the Securities and Exchange Commission |
23
EXHIBIT 10.51
LIFETIME PROGRAM CONTRACT
BETWEEN GENERAL MOTORS CORPORATION
NORTH AMERICAN OPERATIONS ("BUYER") AND
AMERICAN AXLE & MANUFACTURING, INC. ("SELLER")
1. Purchase of Product
Seller agrees to sell, and Buyer agrees to purchase, 100% of Buyer's production and service requirements for the following products (the "Product" or "Goods") covered by this LPC:
*GMT900/920/930 (including all derivatives of the GMT900 platform) Driveline Components and Modules
Buyer and Seller agree that the AAM/GM June 14, 2001 agreement and December 21, 2001 agreement are hereby made a part of this contract and are incorporated by reference. These referenced agreements contain the product description of components and modules included in this lifetime program contract.
2. Term
The term of this Agreement is for the "life of the Product", which is defined as the duration of the GMT 900/920/930 style (including all derivatives of the GMT900 platform) presently projected to run through June 2012.
3. Prices; Price Reduction
The per unit price of the Product is F.O.B. Seller's Plant. The price of the GMT 900 series program components shall determined per the June 14, 2001 and December 21, 2001 agreements between GM and AAM.
Except for increases or decreases in Seller's cost by reason of Seller's participation in Buyer's Steel Resale Program; Buyer's pricing adjustment policy(ies) for non-ferrous metals; permitted under the AAM/GM Purchasing Transition agreement dated 10/5/99 (including metal market adjustments described in paragraph 6), the AAM/GM Directed Buy Component Agreement dated 12/21/2000, and the AAM/GM Foreign Currency Fluctuation Adjustment Procedure dated 8/31/01; or otherwise permitted under Buyer's Purchase Order Terms and Conditions, no adjustments will be made hereunder for increases or decreases in Seller's costs for materials. Except for the increases or decreases set forth above, no other pricing adjustments (e.g. labor or overhead) will be made except by agreement between AAM and GM.
In addition, Buyer and Seller will use their best efforts to implement cost savings and productivity improvements, in order to reduce Seller's costs, with the understanding the 50 percent (50%) of jointly achieved net savings (after deduction of expenditures for development, applications, engineering tools, prototypes and financing) will be applied to reduce the price of the Product to Buyer and the balance will be for the benefit of Seller.
4. Supplier Development: Quality Control
Seller agrees to participate in Buyer's supplier quality and development program(s). In addition, Seller shall comply with all quality requirements and procedures specified by Buyer, as the same may be revised from time to time, including those applicable to Seller as set forth in Quality System Requirements QS-9000.
5. Right to Purchase from Others
5.1 Seller will assure that the Product remains competitive in terms of technology, design, and quality with similar goods available to Buyer during the term of this Agreement. If, in the reasonable opinion of Buyer, the Product does not remain competitive, Buyer, to the extent it is free to do so, will advise Seller in writing of the area(s) in which another product is more competitive with respect to technology, design or quality. If, within 150 days, Seller does not agree to immediately sell the Product with comparable technology, design or quality, Buyer may give notice of termination of this Agreement and after a period of one (1) year after such notice may purchase from another supplier without liability to Seller.
5.2 It is agreed by the parties that nothing in this Paragraph 5 shall modify or otherwise limit Buyer's right under Paragraph 12 ("Cancellation") of Buyer's Purchase Order Terms and Conditions.
6. Technical Information: Waiver of Claims
6.1 Buyer and Seller will cooperate to create, maintain, update and share technical information about the Product and its manufacture, without restriction, as needed, and in compliance with Buyer's drafting and math data standards.
6.2 In the event Buyer exercises its right to terminate or cancel this Agreement, for reasons other than those set forth in Paragraph 5 above, and then makes the Product or purchases the Product from another supplier, Seller agrees not to bring any action or claim against Buyer, its suppliers, dealers, or customers for any reason, excluding any claim for infringement of patents or other proprietary rights, arising from the manufacture, use and sale of the Product or use of the information furnished by Seller to Buyer under this Agreement. Seller will secure the necessary agreements with its employees and sub-contractors to assure compliance with this Section 6.
7. Purchase Order Terms and Conditions
Buyer's Purchase Order Terms and Conditions (1986), a copy of which is attached, are hereby incorporated into this Agreement by reference. It is understood that Paragraph 13 TERMINATION will not be applicable with respect to this contract. Any amendment to or revision of such Terms and Conditions shall also become a part hereof, provided that: (i) Buyer provides Seller with a copy of the Terms and Conditions as amended or revised; and (ii) Seller does not object to said amendment or revised Terms and Conditions within thirty (30) days after receipt. The Terms and Conditions and any amendment or revision made a part thereof shall be construed, to the extent possible, as consistent with the terms and conditions set forth herein and as cumulative; provided, however, that if such construction is unreasonable, terms and conditions set forth herein shall control.
This Agreement is effective upon its execution. The parties hereby agree that this agreement supersedes the Component Supply Agreement between them, dated February 28, 1994, as amended, as it relates to the subject matter contained herein and removes any requirement with respect to components covered hereby for GM to give notice of non-renewal under such agreement.
Seller Buyer
By /s/ Michael C. Flinn By /s/ Jonathan Gardner
------------------------------- --------------------------------
Title Director-Sales-AAM Title Global Commodity Manager
---------------------------- -----------------------------
Date 6/4/03 Date 30 May 03
----------------------------- ------------------------------
|
.
.
.
AMERICAN AXLE & MANUFACTURING HOLDINGS, INC.
EXHIBIT 12.01 -- COMPUTATION OF RATIO OF EARNINGS TO FIXED CHARGES
(UNAUDITED)
YEAR ENDED DECEMBER 31,
2002 2001 2000 1999 1998
-------------------------------------------------
(In millions, except for ratios)
FIXED CHARGES:
Interest expense, including amortization of debt issuance costs $ 51.0 $ 60.2 $ 65.7 $ 61.7 $ 44.8
Estimated interest portion of rents 15.8 16.6 15.0 12.0 4.7
Capitalized interest 8.2 13.2 11.9 8.5 3.8
-------------------------------------------------
Total fixed charges as defined 75.0 90.0 92.6 82.2 53.3
EARNINGS:
Income from continuing operations before income tax expense 273.8 180.9 203.4 183.4 5.6
Total fixed charges as defined 75.0 90.0 92.6 82.2 53.3
Fixed charges not deducted in the determination of income from
continuing operations before income tax expense (8.2) (13.2) (11.9) (8.5) (3.8)
-------------------------------------------------
Total earnings as defined $ 340.6 $ 257.7 $ 284.1 $ 257.1 $ 55.1
-------------------------------------------------
RATIO OF EARNINGS TO FIXED CHARGES 4.54 2.86 3.07 3.13 1.03
=================================================
|
SIX MONTHS ENDED JUNE 30, 2003
------------------------------
FIXED CHARGES:
Interest expense, including amortization of debt issuance costs $ 24.9
Estimated interest portion of rents 6.2
Capitalized interest 2.6
-------
Total fixed charges as defined $ 33.7
EARNINGS:
Income from continuing operations before income tax expense $ 161.5
Total fixed charges as defined 33.7
Fixed charges not deducted in the determination of income from
continuing operations before income tax expense (2.6)
-------
Total earnings as defined $ 192.6
-------
RATIO OF EARNINGS TO FIXED CHARGES 5.72
=======
|
EXHIBIT 31.1
CERTIFICATION PURSUANT TO RULE 13a-14(a) OF THE SECURITIES EXCHANGE ACT
I, Richard E. Dauch, Co-Founder, Chairman of the Board & Chief Executive Officer, certify that:
1. I have reviewed this Quarterly Report on Form 10-Q of American Axle & Manufacturing Holdings, Inc;
2. Based on my knowledge, this report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this report;
3. Based on my knowledge, the financial statements, and other financial information included in this report, fairly present in all material respects the financial condition, results of operations and cash flows of the registrant as of, and for, the periods presented in this report;
4. The registrant's other certifying officers and I are responsible for establishing and maintaining disclosure controls and procedures (as defined in Exchange Act Rules 13a-15(e) and 15d-15(e)) for the registrant and have:
a) Designed such disclosure controls and procedures, or caused
such disclosure controls and procedures to be designed under
our supervision, to ensure that material information relating
to the registrant, including its consolidated subsidiaries, is
made known to us by others within those entities, particularly
during the period in which this report is being prepared;
b) Evaluated the effectiveness of the registrant's disclosure
controls and procedures and presented in this report our
conclusions about the effectiveness of the disclosure controls
and procedures, as of the end of the period covered by this
report based on such evaluation; and
c) Disclosed in this report any change in the registrant's
internal control over financial reporting that occurred during
the registrant's most recent fiscal quarter that has
materially affected, or is reasonably likely to materially
affect, the registrant's internal control over financial
reporting; and
5. The registrant's other certifying officers and I have disclosed, based on our most recent evaluation of internal control over financial reporting, to the registrant's auditors and the audit committee of registrant's board of directors (or persons performing the equivalent functions):
a) All significant deficiencies and material weaknesses in the
design or operation of internal control over financial
reporting which are reasonably likely to adversely affect the
registrant's ability to record, process, summarize and report
financial information; and
b) Any fraud, whether or not material, that involves management
or other employees who have a significant role in the
registrant's internal control over financial reporting.
Date: August 1, 2003
By: /s/ Richard E. Dauch
-----------------------------
Richard E. Dauch
Co-Founder, Chairman of the Board & Chief Executive Officer
(Principal Executive Officer)
|
EXHIBIT 31.2
CERTIFICATION PURSUANT TO RULE 13a-14(a) OF THE SECURITIES EXCHANGE ACT
I, Robin J. Adams, Executive Vice President -- Finance & Chief Financial Officer, certify that:
1. I have reviewed this Quarterly Report on Form 10-Q of American Axle & Manufacturing Holdings, Inc;
2. Based on my knowledge, this report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this report;
3. Based on my knowledge, the financial statements, and other financial information included in this report, fairly present in all material respects the financial condition, results of operations and cash flows of the registrant as of, and for, the periods presented in this report;
4. The registrant's other certifying officers and I are responsible for establishing and maintaining disclosure controls and procedures (as defined in Exchange Act Rules 13a-15(e) and 15d-15(e)) for the registrant and have:
a) Designed such disclosure controls and procedures, or caused
such disclosure controls and procedures to be designed under
our supervision, to ensure that material information relating
to the registrant, including its consolidated subsidiaries, is
made known to us by others within those entities, particularly
during the period in which this report is being prepared;
b) Evaluated the effectiveness of the registrant's disclosure
controls and procedures and presented in this report our
conclusions about the effectiveness of the disclosure controls
and procedures, as of the end of the period covered by this
report based on such evaluation; and
c) Disclosed in this report any change in the registrant's
internal control over financial reporting that occurred during
the registrant's most recent fiscal quarter that has
materially affected, or is reasonably likely to materially
affect, the registrant's internal control over financial
reporting; and
5. The registrant's other certifying officers and I have disclosed, based on our most recent evaluation of internal control over financial reporting, to the registrant's auditors and the audit committee of registrant's board of directors (or persons performing the equivalent functions):
a) All significant deficiencies and material weaknesses in the
design or operation of internal control over financial
reporting which are reasonably likely to adversely affect the
registrant's ability to record, process, summarize and report
financial information; and
b) Any fraud, whether or not material, that involves management
or other employees who have a significant role in the
registrant's internal control over financial reporting.
Date: August 1, 2003
By: /s/ Robin J. Adams
-------------------------
Robin J. Adams
Executive Vice President -- Finance & Chief Financial Officer
(Principal Financial Officer)
|
EXHIBIT 32.1
CERTIFICATIONS PURSUANT TO 18 U.S.C. SECTION 1350,
AS ADOPTED PURSUANT TO SECTION 906
OF THE SARBANES-OXLEY ACT OF 2002
In connection with the Quarterly Report of American Axle & Manufacturing Holdings, Inc. (the "Issuer") on Form 10-Q for the period ending June 30, 2003 as filed with the Securities and Exchange Commission on the date hereof (the "Report"), I, Richard E. Dauch, Co-Founder, Chairman of the Board & Chief Executive Officer of the Issuer, and I, Robin J. Adams, Executive Vice President -- Finance & Chief Financial Officer, certify, pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002, that:
1) The Report fully complies with the requirements of Section 13(a) or 15(d) of the Securities Exchange Act of 1934; and
2) The information contained in the Report fairly presents, in all material respects, the financial condition and results of operations of the Issuer.
By: /s/ Richard E. Dauch By: /s/ Robin J. Adams
------------------------------- --------------------------------
Richard E. Dauch Robin J. Adams
Co-Founder, Chairman of the Board & Executive Vice President -- Finance &
Chief Executive Officer Chief Financial Officer
August 1, 2003 August 1, 2003
|