ITEM 1A. RISK FACTORS.

Our business faces many risks. Any of the risks discussed below, or elsewhere in this report or in our other filings with the Securities and Exchange Commission (“SEC”), could have a material impact on our business, financial condition, or results of operations.

Risks Related to Our Business

We continue to sustain losses and our revenues are not sufficient to sustain our operations.

Even though we ceased being a “development stage” company in April 2006, we are still subject to all of the risks associated with having a limited operating history and pursuing the development of new products. Our cash flows may be insufficient to meet expenses relating to our operations and the development of our business, and may be insufficient to allow us to develop new products. We currently conduct research and development using our proprietary platform technologies to develop oral controlled release and other delivery products. We do not know whether we will be successful in the development of such products. We have an accumulated deficit of approximately $16,102 thousand since our inception in 2003 through December 31, 2013. To date, these losses have been financed principally through sales of equity securities. Our revenues for the past five years ended December 31, 2013, December 31, 2012, December 31, 2011, December 31, 2010 and December 31, 2009 were $948 thousand, $1,198 thousand, $440 thousand, $1,337 thousand, and $1,279 thousand respectively. Our revenues in 2013 consisted primarily of royalty income and the amortization of deferred revenue related to the commercialization of Forfivo XL®, our first FDA-approved product, which was commercialized in October 2012, and milestone payments related to the development of our anti-migraine and opioid dependence VersaFilm™ products. Revenue generated to date has not been sufficient to sustain our operations. In order to achieve profitability, our revenue streams will have to increase and there is no assurance that revenues will increase to such a level.

11

We may incur losses associated with foreign currency fluctuations.

The majority of our expenses are paid in Canadian dollars, while a significant portion of our revenues are in U.S. dollars. Our financial results are subject to the impact of currency exchange rate fluctuations. Adverse movements in exchange rates could have a material adverse effect on our financial condition and results of operations.

We may need additional capital to fulfill our business strategies. We may also incur unforeseen costs. Failure to obtain such capital would adversely affect our business.

We will need to expend significant capital in order to continue with our research and development by hiring additional research staff and acquiring additional equipment. If our cash flows from operations are insufficient to fund our expected capital needs, or our needs are greater than anticipated, we may be required to raise additional funds in the future through private or public sales of equity securities or the incurrence of indebtedness. Additional funding may not be available on favorable terms, or at all. If we borrow additional funds, we likely will be obligated to make periodic interest or other debt service payments and may be subject to additional restrictive covenants. If we fail to obtain sufficient additional capital in the future, we could be forced to curtail our growth strategy by reducing or delaying capital expenditures, selling assets or downsizing or restructuring our operations. If we raise additional funds through public or private sales of equity securities, the sales may be at prices below the market price of our stock and our shareholders may suffer significant dilution.

The loss of the services of key personnel would adversely affect our business.

Our future success depends to a significant degree on the skills, experience and efforts of our executive officers and senior management staff. The loss of the services of existing personnel would be detrimental to our research and development programs and to our overall business.

We are dependent on business partners to conduct clinical trials of, obtain regulatory approvals for, and manufacture, market, and sell our controlled release products.

We depend heavily on our pharmaceutical partners to pay for part or all of the research and development expenses associated with developing a new product and to obtain approval from regulatory bodies such as the FDA to commercialize these products. We also depend on our partners to distribute these products after receiving regulatory approval. Our revenues from research and development fees, milestone payments and royalty fees are derived from our partners. Our inability to find pharmaceutical partners who are willing to pay us these fees in order to develop new products would negatively impact our business and our cash flows.

We have limited experience in manufacturing, marketing and selling pharmaceutical products. Accordingly, if we cannot maintain our existing partnerships or establish new partnerships with respect to our other products in development, we will have to establish our own capabilities or discontinue the commercialization of the affected product. Developing our own capabilities would be expensive and time consuming and could delay the commercialization of the affected product. There can be no assurance that we would be able to develop these capabilities.

Our existing agreements with pharmaceutical industry partners are generally subject to termination by the counterparty on short notice upon the occurrence of certain circumstances, including, but not limited to, the following: a determination that the product in development is not likely to be successfully developed or not likely to receive regulatory approval; our failure to satisfy our obligations under the agreement, or the occurrence of a bankruptcy event. If any of our partnerships are terminated, we may be required to devote additional resources to the product, seek a new partner on short notice, or abandon the product development efforts. The terms of any additional partnerships or other arrangements that we establish may not be favorable to us.

We are also at risk that these partnerships or other arrangements may not be successful. Factors that may affect the success of our partnerships include the following:

• Our partners may incur financial and cash-flow difficulties that force them to limit or reduce their participation in our joint projects;

12

• Our partners may be pursuing alternative technologies or developing alternative products that are competitive to our product, either on their own or in partnership with others;

• Our partners may reduce marketing or sales efforts, or discontinue marketing or sales of our products, which may reduce our revenues received on the products;

• Our partners may have difficulty obtaining the raw materials to manufacture our products in a timely and cost effective manner or experience delays in production, which could affect the sales of our products and our royalty revenues earned;

• Our partners may terminate their partnerships with us. This could make it difficult for us to attract new partners or adversely affect perception of us in the business and financial communities;

• Our partners may pursue higher priority programs or change the focus of their development programs, which could affect the partner’s commitment to us. Pharmaceutical and biotechnology companies historically have re-evaluated their priorities from time to time, including following mergers and consolidations, a common occurrence in recent years; and

• Our partners may become the target of litigation for purported patent or intellectual property infringement, which could delay or prohibit commercialization of our products and which would reduce our revenue from such products.

We face competition in our industry, and many of our competitors have substantially greater experience and resources than we do.

We compete with other companies within the drug delivery industry, many of which have more capital, more extensive research and development capabilities and greater human resources than we do. Some of these drug delivery competitors include Monosol Rx, Tesa-Labtec GmbH, BioDelivery Sciences International, Inc. and LTS Lohmann Therapy Systems Corp. Our competitors may develop new or enhanced products or processes that may be more effective, less expensive, safer or more readily available than any products or processes that we develop, or they may develop proprietary positions that prevent us from being able to successfully commercialize new products or processes that we develop. As a result, our products or processes may not compete successfully, and research and development by others may render our products or processes obsolete or uneconomical. Competition may increase as technological advances are made and commercial applications broaden.

We rely upon third-party manufacturers, which puts us at risk for supplier business interruptions.

We have entered into agreements with third party manufacturers to manufacture certain of our products once we complete development and after we receive regulatory approval. If our third-party manufacturers fail to perform, our ability to market products and to generate revenue would be adversely affected. Our failure to deliver products in a timely manner could lead to the dissatisfaction of our distribution partners and damage our reputation, causing our distribution partners to cancel existing agreements with us and to stop doing business with us.

The third-party manufacturers that we depend on to manufacture our products are required to adhere to FDA regulations regarding cGMP, which include testing, control and documentation requirements. Ongoing compliance with cGMP and other regulatory requirements is monitored by periodic inspection by the FDA and comparable agencies in other countries. Failure by our third-party manufacturers to comply with cGMP and other regulatory requirements could result in actions against them by regulatory agencies and jeopardize our ability to obtain products on a timely basis.

We are subject to extensive government regulation including the requirement of approval before our products may be marketed. Even if we obtain marketing approval, our products will be subject to ongoing regulatory review.

We, our partners, our products, and our product candidates are subject to extensive regulation by governmental authorities in the United States and other countries. Failure to comply with applicable requirements could result in warning letters, fines and other civil penalties, delays in approving or refusal to approve a product candidate, product recall or seizure, withdrawal of product approvals, interruption of manufacturing or clinical trials, operating restrictions, injunctions, and criminal prosecution.

Our products cannot be marketed in the United States without FDA approval. Obtaining FDA approval requires substantial time, effort, and financial resources, and there can be no assurance that any approval will be granted on a timely basis, if at all. We rely on our partners for the preparation of applications and for obtaining regulatory approvals. If the FDA does not approve our product candidates in a timely fashion, or does not approve them at all, our business and financial condition may be adversely affected. Further, the terms of approval of any marketing application, including the labeling content, may be more restrictive than we desire and could affect the marketability of our or our partner`s products. Subsequent discovery of problems with an approved product may result in restrictions on the product or its withdrawal from the market. In addition, both before and after regulatory approval, we, our partners, our products, and our product candidates are subject to numerous FDA requirements covering testing, manufacturing, quality control, cGMP, adverse event reporting, labeling, advertising, promotion, distribution, and export. Our partners and we are subject to surveillance and periodic inspections to ascertain compliance with these regulations. Further, the relevant law and regulations may change in ways that could affect us, our partners, our products, and our product candidates. Failure to comply with regulatory requirements could have a material adverse impact on our business.

13

Regulations regarding the manufacture and sale of our future products are subject to change. We cannot predict what impact, if any, such changes may have on our business, financial condition or results of operations. Failure to comply with applicable regulatory requirements could have a material adverse effect on our business, financial condition and results of operations.

Additionally, the time required for obtaining regulatory approval is uncertain. We may encounter delays or product rejections based upon changes in FDA policies, including cGMP, during periods of product development. We may encounter similar delays in countries outside of the United States. We may not be able to obtain these regulatory acceptances on a timely basis, or at all.

The failure to obtain timely regulatory acceptance of our products, any product marketing limitations, or any product withdrawals would have a material adverse effect on our business, financial condition and results of operations. In addition, before it grants approvals, the FDA or any foreign regulatory authority may impose numerous other requirements with which we must comply. Regulatory acceptance, if granted, may include significant limitations on the indicated uses for which the product may be marketed. FDA enforcement policy strictly prohibits the marketing of accepted products for unapproved uses. Product acceptance could be withdrawn or civil and/or criminal sanctions could be imposed for our failure to comply with regulatory standards or the occurrence of unforeseen problems following initial marketing.

We may not be able to expand or enhance our existing product lines with new products limiting our ability to grow.

If we are not successful in the development and introduction of new products, our ability to grow will be impeded. We may not be able to identify products to enhance or expand our product lines. Even if we can identify potential products, our investment in research and development might be significant before we could bring the products to market. Moreover, even if we identify a potential product and expend significant dollars on development, we may never be able to bring the product to market or achieve market acceptance for such product. As a result, we may never recover our expenses.

The market may not be receptive to products incorporating our drug delivery technologies.

The commercial success of any of our products that are approved for marketing by the FDA and other regulatory authorities will depend upon their acceptance by the medical community and third party payers as clinically useful, cost-effective and safe. To date, only two products based upon our technologies have been marketed in the United States, which limits our ability to provide guidance or assurance as to market acceptance.

Factors that we believe could materially affect market acceptance of these products include:

• The timing of the receipt of marketing approvals and the countries in which such approvals are obtained;

• The safety and efficacy of the product as compared to competitive products;

• The relative convenience and ease of administration as compared to competitive products;

• The strength of marketing distribution support; and

• The cost-effectiveness of the product and the ability to receive third party reimbursement.

We are subject to environmental regulations and any failure to comply may result in substantial fines and sanctions.

Our operations are subject to Canadian and international environmental laws and regulations governing, among other things, emissions to air, discharges to waters and the generation, handling, storage, transportation, treatment and disposal of raw materials, waste and other materials. Many of these laws and regulations provide for substantial fines and criminal sanctions for violations. We believe that we are and have been operating our business and facility in a manner that complies in all material respects with environmental, health and safety laws and regulations; however, we may incur material costs or liabilities if we fail to operate in full compliance. We do not maintain environmental damage insurance coverage with respect to the products which we manufacture.

14

We may have to make significant expenditures in the future to comply with evolving environmental, health and safety requirements, including new requirements that may be adopted or imposed in the future. To meet changing licensing and regulatory standards, we may have to make significant additional site or operational modifications that could involve substantial expenditures or reduction or suspension of some of our operations. We cannot be certain that we have identified all environmental and health and safety matters affecting our activities and in the future our environmental, health and safety problems, and the costs to remediate them, may be materially greater than we expect.

Risks Related to Our Intellectual Property

If we are not able to adequately protect our intellectual property, we may not be able to compete effectively.

Our success depends, to a significant degree, upon the protection of our proprietary technologies. While we currently own four U.S. patents and have applied for five U.S. patents, we will need to pursue additional protection for our intellectual property as we develop new products and enhance existing products. We may not be able to obtain appropriate protection for our intellectual property in a timely manner, or at all. Our inability to obtain appropriate protections for our intellectual property may allow competitors to enter our markets and produce or sell the same or similar products.

If we are forced to resort to legal proceedings to enforce our intellectual property rights, the proceedings could be burdensome and expensive. In addition, our proprietary rights could be at risk if we are unsuccessful in, or cannot afford to pursue, those proceedings.

We also rely on trade secrets and contract law to protect some of our proprietary technology. We have entered into confidentiality and invention agreements with our employees and consultants. Nevertheless, these agreements may not be honored and they may not effectively protect our right to our un-patented trade secrets and know-how. Moreover, others may independently develop substantially equivalent proprietary information and techniques or otherwise gain access to our trade secrets and know-how.

In 1995, the U.S. Patent and Trademark Office adopted changes to the U.S. patent law that made the term of issued patents 20 years from the date of filing rather than 17 years from the date of issuance, subject to specified transition periods. Beginning in June 1995, the patent term became 20 years from the earliest effective filing date of the underlying patent application. These changes may reduce the effective term of protection for patents that are pending for more than three years. While we cannot predict the effect that these changes will have on our business, they could have a material adverse effect on our ability to protect our proprietary information. Furthermore, the possibility of extensive delays in the patent issuance process could effectively reduce the term during which a marketed product is protected by patents.

We may need to obtain licenses to patents or other proprietary rights from third parties. We may not be able to obtain the licenses required under any patents or proprietary rights or they may not be available on acceptable terms. If we do not obtain required licenses, we may encounter delays in product development or find that the development, manufacture or sale of products requiring licenses could be foreclosed. We may, from time to time, support and collaborate in research conducted by universities and governmental research organizations. We may not be able to acquire exclusive rights to the inventions or technical information derived from these collaborations, and disputes may arise over rights in derivative or related research programs conducted by us or our partners.

If we infringe on the rights of third parties, we may not be able to sell our products, and we may have to defend against litigation and pay damages.

If a competitor were to assert that our products infringe on its patent or other intellectual property rights, we could incur substantial litigation costs and be forced to pay substantial damages. Such litigation costs could be as a result of direct litigation against us, or as a result of litigation against one or more of our partners to whom we have contractually agreed to indemnify in the event that our intellectual property is the cause of a successful litigious action against our partner. Third-party infringement claims, regardless of their outcome, would not only consume significant financial resources, but would also divert our management’s time and attention. Such claims could also cause our customers or potential customers to purchase competitors’ products or defer or limit their purchase or use of our affected products until resolution of the claim. If any of our products are found to violate third-party intellectual property rights, we may have to re-engineer one or more of our products, or we may have to obtain licenses from third parties to continue offering our products without substantial re-engineering. Our efforts to re-engineer or obtain licenses could require significant expenditures and may not be successful.

15

Our controlled release products that are generic versions of branded controlled release products that are covered by one or more patents may be subject to litigation, which could delay FDA approval and commercial launch of our products.

We expect to file or have our partners file NDAs or ANDAs for our controlled release products under development that are covered by one or more patents of the branded product. It is likely that the owners of the patents covering the brand name product or the sponsors of the NDA with respect to the branded product will sue or undertake regulatory initiatives to preserve marketing exclusivity. Any significant delay in obtaining FDA approval to market our products as a result of litigation, as well as the expense of such litigation, whether or not we or our partners are successful, could have a materially adverse effect on our business, financial condition and results of operations.

Risks Related to Our Securities:

The price of our common stock could be subject to significant fluctuations.

Any of the following factors could affect the market price of our common stock:

• Our failure to achieve and maintain profitability;

• Changes in earnings estimates and recommendations by financial analysts;

• Actual or anticipated variations in our quarterly results of operations;

• Changes in market valuations of similar companies;

• Announcements by us or our competitors of significant contracts, new products, acquisitions, commercial relationships, joint ventures or capital commitments;

• The loss of major customers or product or component suppliers;

• The loss of significant partnering relationships; and

• General market, political and economic conditions.

We have a significant number of convertible securities outstanding that could be exercised in the future. Subsequent resale of these and other shares could cause our stock price to decline. This could also make it more difficult to raise funds at acceptable levels pursuant to future securities offerings.

We have a concentration of stock ownership and control, and a small number of shareholders have the ability to exert significant control in matters requiring shareholder vote and may have interests that conflict with yours.

Directors and Officers hold 17.6% of our common stock. See “Security Ownership of Certain Beneficial Owners and Management” on page 29. As a result, such shareholders, acting together, may have the ability to control matters requiring shareholder approval, including the election of directors and approval of mergers and other significant corporate transactions. This concentration of ownership may have the effect of delaying, preventing or deterring a change in control of our company. It may also deprive our shareholders of an opportunity to receive a premium for their shares as part of a sale of our company and may affect the market price of our common stock. In deciding how to vote on such matters, those shareholders’ interests may conflict with yours.

Changes in the independence of our directors could result in governance risks.

Currently, we have a majority of independent directors, but in the future we cannot guarantee that our Board of Directors (the “Board”) will always have a majority of independent directors. In the absence of a majority of independent directors, our chief executive officer, who is also a principal shareholder and director, could establish policies and enter into transactions without independent review and approval. This could present the potential for a conflict of interest between us and our shareholders generally and the controlling officers, stockholders or directors.

Our common stock is a high risk investment.

16

Our common stock was quoted on the OTC Bulletin Board under the symbol “IGXT” from January 2007 until June 2012 and, subsequent to our upgrade in June 2012, has been quoted on the OTCQX. Our common stock has also been listed on the TSX Venture Exchange under the symbol “IGX” since May 2008.

There is a limited trading market for our common stock, which may affect the ability of shareholders to sell our common stock and the prices at which they may be able to sell our common stock.

The market price of our common stock has been volatile and fluctuates widely in response to various factors which are beyond our control. The price of our common stock is not necessarily indicative of our operating performance or long term business prospects. In addition, the securities markets have from time to time experienced significant price and volume fluctuations that are unrelated to the operating performance of particular companies. These market fluctuations may also materially and adversely affect the market price of our common stock.

In the United States, our common stock is considered a “penny stock”. The SEC has adopted regulations which generally define a “penny stock” to be an equity security that has a market price of less than $5.00 per share or an exercise price of less than $5.00 per share, subject to specific exemptions. This designation requires any broker or dealer selling these securities to disclose certain information concerning the transaction, obtain a written agreement from the purchaser and determine that the purchaser is reasonably suitable to purchase the securities. These rules may restrict the ability of brokers or dealers to sell our common stock and may affect the ability of investors to sell their shares.

As a result of the foregoing, our common stock should be considered a high risk investment.

The application of the “penny stock” rules to our common stock could limit the trading and liquidity of our common stock, adversely affect the market price of our common stock and increase stockholder transaction costs to sell those shares.

As long as the trading price of our common stock is below $5.00 per share, the open market trading of our common stock will be subject to the “penny stock” rules, unless we otherwise qualify for an exemption from the “penny stock” definition. The “penny stock” rules impose additional sales practice requirements on certain broker-dealers who sell securities to persons other than established customers and accredited investors (generally those with assets in excess of $1,000,000 or annual income exceeding $200,000 or $300,000 together with their spouse). These regulations, if they apply, require the delivery, prior to any transaction involving a penny stock, of a disclosure schedule explaining the penny stock market and the associated risks. Under these regulations, certain brokers who recommend such securities to persons other than established customers or certain accredited investors must make a special written suitability determination regarding such a purchaser and receive such purchaser’s written agreement to a transaction prior to sale. These regulations may have the effect of limiting the trading activity of our common stock, reducing the liquidity of an investment in our common stock and increasing the transaction costs for sales and purchases of our common stock as compared to other securities.

We became public by means of a reverse merger, and as a result we are subject to the risks associated with the prior activities of the public company with which we merged. In addition, we may not be able to attract the attention of major brokerage firms or institutional buyers.

Additional risks may exist because we became public through a "reverse merger" with a shell corporation. Although the shell did not have recent or past operations or assets and we performed a due diligence review of the public company, there can be no assurance that we will not be exposed to undisclosed liabilities resulting from the prior operations of our company. Security analysts of major brokerage firms and securities institutions may not cover us since there are no broker-dealers who sold our stock in a public offering who would have an incentive to follow or recommend the purchase of our common stock. No assurance can be given that established brokerage firms will want to conduct any financings for us in the future.

Our limited cash resources restrict our ability to pay cash dividends.

Since our inception, we have not paid any cash dividends on our common stock. We currently intend to retain future earnings, if any, to support operations and to finance the growth and development of our business. Therefore, we do not expect to pay cash dividends in the foreseeable future. Any future determination relating to our dividend policy will be made at the discretion of our Board of Directors and will depend on a number of factors, including future earnings, capital requirements, financial conditions and future prospect and other factors that the Board of Directors may deem relevant. If we do not pay any dividends on our common stock, our shareholders will be able to profit from an investment only if the price of the stock appreciates before the shareholder sells it. Investors seeking cash dividends should not purchase our common stock.

17

If we are the subject of securities analyst reports or if any securities analyst downgrades our common stock or our sector, the price of our common stock could be negatively affected.

Securities analysts may publish reports about us or our industry containing information about us that may affect the trading price of our common stock. In addition, if a securities or industry analyst downgrades the outlook for our stock or one of our competitors’ stocks, the trading price of our common stock may also be negatively affected.

Future sales of our common stock by our existing stockholders may negatively impact the trading price of our common stock.

If a substantial number of our existing stockholders decide to sell shares of their common stock in the public market following the completion of this offering, the price at which our common stock trades could decline. Additionally, the public market’s perception that such sales might occur may also depress the price of our common stock.