UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549

FORM 8-K

CURRENT REPORT

Pursuant to Section 13 OR 15(d) of the Securities Exchange Act of 1934

Date of Report (Date of earliest event reported) May 14, 2016

LEXARIA BIOSCIENCE CORP.
(Exact name of registrant as specified in its charter)

Nevada 000-52138 20-2000871
(State or other jurisdiction of (Commission File Number) (IRS Employer
incorporation)   Identification No.)

#950 – 1130 West Pender Street, Vancouver, BC Canada V6E 4A4
(Address of principal executive offices) (Zip Code)
   
Registrant’s telephone number, including area code (604) 602-1675

LEXARIA CORP.
(Former name or former address, if changed since last report.)

Check the appropriate box below if the Form 8-K filing is intended to simultaneously satisfy the filing obligation of the registrant under any of the following provisions:

[   ]  Written communications pursuant to Rule 425 under the Securities Act (17 CFR 230.425)
[   ]  Soliciting material pursuant to Rule 14a-12 under the Exchange Act (17 CFR 240.14a -12)
[   ]  Pre-commencement communications pursuant to Rule 14d-2(b) under the Exchange Act (17 CFR 240.14d -2(b))
[   ]  Pre-commencement communications pursuant to Rule 13e-4(c) under the Exchange Act (17 CFR 240.13e -4(c))

Item 1.01        Entry into a Material Definitive Agreement

On May 14, 2016, our company entered into the definitive licensing agreement to license its patent pending technology for the purpose of entering the U.S. regulated medical and adult use cannabis edibles marketplace. Under the terms of the licensing agreement, the licensee will pay a minimum of USD$122,000 in pre-defined staged payments to our company over the initial two-year term, which will commence in the state of Colorado.

The licensing agreement also contemplates opportunities to expand, both in scope of products offered in Colorado as well as to other states such as California, Washington, and Oregon. Pursuant to the Agreement, if the licensee were to introduce certain product lines utilizing our technology in each of the four states contemplated, then our company could receive a maximum of $1,064,000 over approximately three and a half years, and the licensee would have semi-exclusivity to introduce its products in each of those states.


- 2 -

Item 7.01        Regulation FD Disclosure

A copy of the news release announcing our licensing agreement is filed as exhibit 99.1 to this current report and is hereby incorporated by reference.

Item 9.01        Financial Statements and Exhibits

10.1* Licensing Agreement of Lexaria Bioscience Corp. dated May 14, 2016.*
   
99.1 Press Release dated May 20, 2016

* Certain parts of this document has not been disclosed and have been filed separately with the Secretary, Securities and Exchange Commission, and are subject to a confidential treatment request pursuant to Rule 406 of the Securities Exchange Act of 1933.

SIGNATURES

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned hereunto duly authorized.

LEXARIA BIOSCIENCE CORP.

 

/s/Chris Bunka  
Chris Bunka  
CEO, Principal Executive Officer  

Date:        May 20, 2016



Legend:

Certain parts of this document have not been disclosed and have been filed separately with the Secretary of the Securities and Exchange Commission, and are subject to a confidential treatment request pursuant to Rule 406 of the Securities Exchange Act of 1933. These sections have been marked with asterisks (ie. “********”). For following information has been removed:

  Terms or Type of Term(s) Section:
1. Identifying information of a party to the Licensing Agreement Page 1 – 1 st paragraph

Page 1 – Recitals

Page 10 – Section 14

Page 11 – Section 20

Page 14 – Signature
2. Subject matter of Licensing Agreement Page 1 – Recitals

Page 2 – Section 1(b) and 1(c)

Page 3 – Section 2(a)

Exhibit B

Exhibit C – Section (b)(i)
3. Terms regarding exclusivity and duration of license and License Option Page 3 – Section 2(a)(i) and (ii)

Page 3 – Section 2(c)
4. Rights to improvements on license and/or intellectual property Page 4 – Section 3(c)(ii) and (iii)

Page 5 – Section 3(e)(i) and (ii)
5. Material compensation terms of the Licensing Agreement Page 7 – Section 4(d)

Page 7 – Section 5(a) and (b)

Exhibit C – Section (a) and (b)


INTELLECTUAL PROPERTY LICENSE AGREEMENT

This Intellectual Property License Agreement (this “ Agreement ”) dated as of May 14, 2016 (the “ Effective Date ”) is made by and between Lexaria Bioscience Corp., a Nevada corporation with offices at 950, 1130 W. Pender Street, Vancouver, British Columbia, V6E 4A4, Canada (“ Licensor ”), and ******* (“ Licensee ”). LICENSOR and LICENSEE are sometimes referred to individually herein as a “ Party ” and collectively as the “ Parties ”.

RECITALS

WHEREAS, LICENSEE is directly or indirectly through a Partner, as further defined in section 1(a), engaged in the business of developing, manufacturing, and selling marijuana-infused products pursuant to licenses issued by the State of Colorado Department of Revenue Marijuana Enforcement Division (“ MED ”), pursuant to regulations promulgated under C.R.S. § 12-43.4 -101 et seq , and the City of *******  pursuant to regulations promulgated thereby;

WHEREAS, LICENSOR owns and holds certain intellectual property and technology related to, including but not limited to, the development, testing, and manufacturing process for marijuana-infused products (“ Technology ”), which Technology is more specifically described in Exhibit A and detailed batch records and formulation calculation spreadsheets provided by email on March 23, 2016, by LICENSOR to LICENSEE;

WHEREAS, LICENSEE wishes to utilize the Technology from LICENSOR, and LICENSOR desires for LICENSEE to utilize the Technology, to create, test, manufacture and sell marijuana-infused ******* products with or without the addition of hemp or products using derivatives of either the marijuana or hemp plants to create consumable and/or topical products that will always contain some ******* ( “End Products” ) subject to the terms and conditions set forth herein. Such End Products shall only be distributed and/or sold by LICENSEE or Partner as defined in Section 1.a below to the following permitted locations ( “Permitted Locations” ): properly licensed medical marijuana dispensaries, retail marijuana stores, and marijuana delivery services that are in compliance with all local and state licensing requirements applicable to the marijuana industry within the State of Colorado or in any other state in which LICENSEE is permitted by this Agreement or an addendum to the same to sell or distribute the End Products further, the End Products are specifically prohibited from sale by LICENSEE to or through any pharmacies, convenience stores, grocery stores, fitness clubs and other similar traditional retail and wholesale locations. The End Products will be classified into Product Lines (“ Product Lines ”) as further defined in Section 1.

NOW, THEREFORE, in consideration of the promises and the respective covenants and agreements of the parties contained in this Agreement, the Parties hereto agree as follows:

AGREEMENT

  1.

License of Technology. Subject to the terms and conditions of this Agreement, LICENSOR hereby grants to LICENSEE an exclusive and/or semi-exclusive (depending on the type of Product Line), non-transferable, non-sub-licensable license, for the Technology to develop, test, make, sell, offer for sale and distribute the End Products consisting of the Product Lines as identified in Exhibit B during the Term of this Agreement. LICENSOR has the right to update Exhibit A as necessary in relation to the listed patent applications as may be required by the patent and trademark offices during the course of prosecution.



  a)

Non-transferable: The license granted by this Section 1 may not be transferred or sublicensed by LICENSEE without LICENSOR’s written consent. However, LICENSEE has the right to name one (1) individual sublicense partner in each Territory (“ Partner ”) to facilitate its rights and obligations under this Agreement. LICENSEE shall designate in writing to LICENSOR the Partner for LICENSOR’s confirmation, which shall not be unreasonably withheld or delayed. Provided, however, that the Partner agrees in writing to all obligations of LICENSEE hereunder, including those relating to confidentiality and non-use regarding both Parties’ Confidential Information. In the event that LICENSEE performs one or more of its obligations under this Agreement through any such Partner, then LICENSEE shall at all times be responsible for the performance by such Partner of LICENSEE’s obligations hereunder, including, but not limited to, LICENSEE’S obligations under Sections 11, 12 and 13.

     
  b)

Product Lines: The Parties agree to the meaning of “Product Lines” based on the following list of examples: all products that are generally recognized as ******* shall constitute one product line (the ******* all other ******* constitute one product line (the “ ******* ”); and all constitute one product line (the “ ******* ”). The Parties agree that LICENSEE is not limited to production of the End Products as identified in Schedule B to this Agreement, but that LICENSEE may create, test, produce, and sell additional new End Products on a non-exclusive basis that are derived from or otherwise incorporate the Technology and such new End Products must always contain some ******* with the caveat that all such additional End Products are only to be distributed and/or sold to Permitted Locations as defined in Section 1. Such new End Products are subject to Section 3(b) below.

     
  c)

Active Substances: Nothing in this Agreement infers applicability of the Technology by LICENSEE for enabling active substance incorporation and potentiation in LICENSEE’s End Products, other than derived from marijuana with or without hemp. LICENSEE is prohibited from developing, manufacturing or selling, whether directly or indirectly, including through its Partner, in each Territory, any Product Lines that are marketed as the following types of products: (i) a fat soluble vitamin product for vitamins A, D, E, and/or K, whether in their natural or synthetic forms; (ii) a Non-Steroidal Anti Inflammatory (NSAID) product including, but not limited to, acetaminophen, ibuprofen, acetylsalicylic acid, diclofenac, indomethacin, and piroxicam; or (iii) a nicotine product. LICENSEE is permitted to incorporate other active substances within their Product Lines and the Parties agree that the End Products as defined will always ******* and shall only be distributed and/or sold in the Permitted Locations; and the Parties further agree that any such End Products that incorporate active substances beyond those derived from marijuana and/or hemp shall still fall under one of the Product Line classifications as defined in Section 1 with all associated obligations by the LICENSEE; and the Parties further agree there is no requirement to pay more than one set of fees as described in Exhibit C regardless of whether more than a single active substance is utilized in any given product.


  2)

Exclusivity and Semi-exclusivity Licenses and License Option. LICENSEE will have the following rights to produce and sell the End Products in the state of Colorado excluding any native lands therein ( “Territory” ) using the Technology licensed pursuant to this Agreement.




  a)

******* Product Line:

    ************************************************************************************
       
  b)

Other Product Lines: LICENSEE will also have Semi-exclusive rights, as defined above in Section 2(a)(ii), for the term of this Agreement as per Section 4 to launch the other Product Lines within the Territory.

       
  c)

License Option: Furthermore, until ******* LICENSOR will reserve one license in each of these three named states – Washington, Oregon, and California excluding any native lands therein – for the benefit of LICENSEE (“ License Option ”), to be ******* and Non-exclusive in the case of the other Product Lines, to distribute and/or sell End Products into Permitted Locations as defined above. If and only at such time as LICENSEE sells or causes to sell directly or through its Partner, as described in Section 1(a) (“ Exercise of License Option ”), any End Products utilizing the Technology in any or all of these additional states, then LICENSEE does hereby agree to a license of the Technology for each state into which it has exercised the License Option that is identical to this Agreement, including that LICENSEE agrees to the identical fee structure and payment terms, for each individual state, as agreed to in this Agreement (“ Subsequent License Agreement ”). Each Subsequent License Agreement shall have a term of two (2) years from the date of signing the Subsequent Agreement, except in California where the two (2) year term of the Subsequent License Agreement in that state shall begin at a later date than the effective date of License Option in that state, ******* All such Subsequent License Agreements shall follow the same terms of this Agreement except with respect to the exclusivity benefits as described above. Subsequent License Agreements shall be considered “entered into by the parties” and effective by both parties executing a written addendum to this Agreement acknowledging that the parties have entered into any such Subsequent License Agreement.

       
  d)

LICENSOR’s Products: LICENSOR shall not be prohibited from (i) licensing or similar arrangements with respect to the Technology outside of the Territory, subject to the License Option set forth above; or (ii) licensing its Technology on the semi-exclusive basis provided for herein, at all times and in all locations, subject to the terms of this Agreement, including the exclusivity provisions and License Options. LICENSOR is expressly permitted to license its Technology on any basis it chooses, at any time, for producing and commercializing its own products, provided, however, that LICENSOR would be considered as one of the three (3) permitted licensees in any of the territories where LICENSEE retains semi-exclusive rights.

       
  e)

Severance Fee: LICENSEE may elect to end sales of a Product Line at its sole discretion with a severance fee (“ Severance Fee”) set forth in Exhibit C. If LICENSEE elects to end sales of any Product Line, then any other licensing provision benefits with respect to that Product Line also end at that time.


  3)

Rights and Obligations Related to the Technology. Except as expressly provided in this section or elsewhere in this Agreement, neither Party will be deemed by this Agreement to have been granted any license or other rights to the other Party’s products, information or other intellectual property rights, either expressly or by implication, estoppel or otherwise.



  a)

LICENSOR Intellectual Property: LICENSOR retains full, absolute, and complete rights to all processes covered or described in all of its patent applications filed prior to the date of this Agreement, and any future continuations, continuations in part or divisional applications filed thereto, including but not limited to the US Provisional patent applications, US Utility patent application, and the International patent application, that comprise the Technology (“ Licensor IP ”), unless LICENSOR allows these applications to abandon or lapse, or otherwise fails to protect the Technology . Except as expressly provided for in Section 2, nothing in this Agreement or in the conduct of the Parties shall be interpreted as preventing LICENSOR from granting to any other person a license for use of the Technology or from using the Technology in any manner whatsoever.

     
  b)

LICENSEE Intellectual Property : Any intellectual property resulting from LICENSEE’s work, know-how, or development that does not include or rely upon the Technology, Licensor IP or jointly owned intellectual property, as described in this Agreement, shall be owned by LICENSEE (“ Licensee IP ”).

     
  c)

Improvements :


  i)

LICENSOR Improvements: The entire right and title to the Technology, whether or not patentable, and any patent applications or patents based thereon, which directly relate to and are not severable from LICENSOR IP and which are improvements thereto by LICENSOR, its employees or others acting solely on LICENSOR’s behalf shall be owned solely by LICENSOR (“Licensor Improvements”). *******

     
  iv)

Improvements; Assignment. LICENSEE and LICENSOR hereby represent that all Partners, employees and other persons acting on its behalf in performing its obligations under this Agreement shall be obligated under a binding written agreement to assign, or as it shall direct, all Joint Improvements that include or rely on the Technology conceived or reduced to practice by such Partners, employees or other persons acting on its behalf in accordance with this Agreement to the benefit of LICENSOR and LICENSEE.




  v)

Improvements; Confidential Information . All Improvements shall constitute Confidential Information and shall be subject to the confidentiality provisions set forth in this Agreement.


  d)

Inventions; Reporting :


  i)

Upon making any invention that does NOT include or rely upon the Technology LICENSEE has no obligation to share such information of invention with LICENSOR nor inform LICENSOR of said invention, and LICENSEE retains unrestricted rights and ability to use, assign, license, seek patent and other forms of intellectual property protection related to said invention. For the avoidance of doubt, any such new invention, development, technology, and/or intellectual property belongs solely to LICENSEE. Upon making any invention that does or does NOT include or rely upon the Technology, LICENSOR has no obligation to share such information of invention with LICENSEE nor inform LICENSEE of said invention, and LICENSOR retains unrestricted rights and ability to use, assign, license, seek patent and other forms of intellectual property protection related to said invention.


  e)

Jointly Owned Intellectual Property : If any patent applications are filed seeking to protect any Joint Improvements (“ Jointly Owned IP ”), each Party shall be named as joint inventors. *******

       
  f)

No Challenge . LICENSEE expressly acknowledges and agrees that all rights in and to the Technology shall remain vested in LICENSOR, and LICENSEE shall not assert any rights to the Technology except as otherwise provided in this Section 3.

       
  g)

Notice Requirements . To the extent required by applicable rules and regulations, including those of the MED related to packaging, LICENSEE agrees that it will include such patent notices and other proprietary notices on all End Products or related materials that contain any Technology as may be reasonably required by MED or other regulators in order to give appropriate notice of all intellectual property rights therein or pertaining thereto.

       
  h)

Quality Control .


  i)

LICENSEE agrees to maintain and preserve the quality of the Technology, and to use the Technology in good faith and in a manner consistent with the uses approved herein.

     
  ii)

LICENSEE shall (a) ensure that all End Products and related materials under the Technology are developed, tested, promoted, manufactured and distributed in a professional manner in compliance with all generally accepted industry standards, and (b) comply in all material respects with any and all laws, rules and regulations that are applicable to the development, testing, promotion, manufacture and distribution of the End Products and such related materials.




  i)

Prosecution and Maintenance . LICENSOR shall be solely responsible for, and have control of, preparing, filing, prosecuting, obtaining, and maintaining the Technology (including Provisional Patent Applications and, if any, issued Patents). LICENSOR shall take such actions as it shall deem to be appropriate in its discretion in connection therewith, and shall pay all costs and expenses incurred by it in connection with the foregoing activities.

     
  j)

Infringement . If LICENSEE learns of any activity by a third party that might constitute an infringement of LICENSOR’s rights in any of the Technology, or if any third party asserts that LICENSEE’s use of the Technology constitutes unauthorized use or infringement, LICENSEE shall so notify LICENSOR.

     
  k)

Enforcement . LICENSOR has the right, but not the obligation, to enforce its rights against any third party infringement and to defend LICENSEE’s right to use the Technology. If LICENSOR prosecutes any alleged infringement of the Technology, or defends LICENSEE’s right to use the Technology, LICENSOR shall control such litigation and shall bear the expense of such actions. LICENSEE shall make all reasonable efforts to assist LICENSOR therewith, including joining such action as a party plaintiff or providing such evidence and expert assistance as LICENSEE may have within its control, with all costs for such cooperation to be borne by LICENSOR. LICENSOR shall retain the award of any damages in this case. If LICENSOR chooses to not enforce against an alleged infringement, LICENSEE may itself enforce LICENSOR’s rights (and its own rights as a Licensee) in the Technology, with all costs to be borne by LICENSEE. LICENSEE shall retain the award of any damages in this case.


  4)

Term and Termination.


  a)

Term. This Agreement shall take effect upon signing by both Parties, and shall remain in effect for the shorter of either two (2) years; or, such circumstances as described in Section 4.c. After the conclusion of the initial Term, this Agreement may be renewed, by written agreement by both Parties, or renegotiated at the end of this Term to reflect the then-current economic conditions of the marketplace and the Parties. If LICENSOR abandons all patent applications or fails to exercise its right to file an application for the provisional patents, LICENSOR shall immediately notify LICENSEE. In the event of such actions by LICENSOR, and where LICENSOR fails to protect the Technology through some means other than a patent, LICENSEE shall retain the right to immediately terminate the Agreement.

     
  b)

Termination. This Agreement and the licenses granted hereunder may be terminated prior to the expiration of the initial term or any renewal term of this Agreement as follows:


  i)

This Agreement may be terminated by LICENSOR by written notice to LICENSEE upon the occurrence of any of the following: (i) failure of LICENSEE to pay any license fees for more than sixty (60) days after they become due; (ii) LICENSEE’s violation of the provisions of Sections 7 and 8 or LICENSEE’s material breach of any other term of this Agreement, which breach is not cured within sixty (60) days after written notice of such breach from LICENSOR; (iii) failure of LICENSEE to maintain all required licenses and governmental authorizations required for the conduct of its business or to comply in all material respects with applicable state and local laws; or (iv)LICENSEE ceases operations, makes a general assignment for the benefit of creditors, or is the subject of a voluntary or involuntary bankruptcy, insolvency or similar proceeding.




  ii)

This Agreement may be terminated by LICENSEE by written notice to LICENSOR in the event of material breach by LICENSOR of its obligations or representations and warranties under this Agreement, which breach is not cured within sixty (60) days after written notice of such breach from LICENSEE.


  c)

This Agreement may be terminated by LICENSEE if LICENSOR allows abandonment or lapse of all pending patent applications listed in Exhibit A or if a judgment or decree is entered in any U.S. court proceeding holding any claim of any patent, upon which the licensed field of use of the Technology hereunder relies, invalid or unenforceable, which judgment or decree is not further reviewable by a superior tribunal.

     
  d)

Effect of Termination . ******* If the Agreement expires without any renewal thereof, and either LICENSOR has been granted patents for the Technology or has not received a final refusal of patent registration, then LICENSEE must cease and desist all utilization of the Technology. In any event, upon the natural future expiration of all pending and issued patents as applicable related to the Technology described herein, or at any time if the patents covering the Technology are finally refused by the U.S. Patent Office or if LICENSOR fails to protect the Technology, the License Agreement shall expire and LICENSEE shall have no further payment obligations to LICENSOR.


  5)

Compensation and Payment.


  a)

In consideration for the license granted to LICENSEE under this Agreement, LICENSEE shall pay LICENSOR certain license fees set forth in Exhibit D (collectively, the “ License Fee ”). The License Fee for a period shall be paid by LICENSEE to LICENSOR no later than the first day of each calendar month during the Term, in U.S. funds, by check or wire transfer of immediately available funds pursuant to the bank account identified by LICENSOR in advance of such payment. ******* expenses when due will be a material breach of this Agreement by LICENSEE. If any payment due to LICENSOR under this Agreement is not paid within thirty (30) days following such Party’s written demand therefore, then such payment shall bear interest at the rate of one and one-half percent (1.5%) per month from the date such payment was originally due.

     
  b)

*******


  6)

Obligations.


  a)

Obligations of LICENSEE. LICENSEE shall be solely responsible for all costs of producing the End Products, including raw materials and labor. LICENSEE acknowledges and agrees that it is solely responsible for (i) procurement of marijuana extraction machinery, marijuana, marijuana oils, hemp, hemp oils, and other raw materials; (ii) compliance with all state and local laws relating to production and sale of marijuana products; and (iii) procurement and maintenance of all required licensing and permits and/or operating authorities, including proper zoning of production and distribution facilities.




  b)

Obligations of LICENSOR.


  i)

Upon execution of this Agreement, LICENSOR shall make the Technology and any additional documents or materials not yet provided as described in Section 1 otherwise necessary to effectuate the license of the Technology contemplated herein available for LICENSEE.

     
  ii)

LICENSOR shall provide LICENSEE with support in connection with LICENSEE's use of the Technology during the term of this Agreement, with reasonable travel expenses paid for by LICENSEE. Any such travel expenses must be approved in advance by LICENSEE. LICENSOR shall not charge any management or professional hourly or daily fee for such support.


  7)

Representations and Warranties.


  a)

Representations and Warranties of LICENSEE. LICENSEE represents and warrants to LICENSOR as follows: (i) LICENSEE is a limited liability company duly organized and in good standing under the laws of the State of Delaware; (ii) the execution, delivery and performance of this Agreement by LICENSEE has been duly authorized by all necessary action on the part of LICENSEE’s managers and/or members and does not violate, conflict with, or require the consent or approval of any third party pursuant to, any contract or legally binding obligation to which LICENSEE is subject; (iii) this Agreement constitutes the valid and binding obligation of LICENSEE enforceable against LICENSEE in accordance with its terms; and (iv) LICENSEE possesses all required licenses, permits or operating authorities necessary for its operations and the manufacture and sale of the End Products as marijuana products and is in compliance with all applicable state and local laws and regulations.

     
  b)

Representations and Warranties of LICENSOR. LICENSOR represents and warrants to LICENSEE as follows: (i) LICENSOR is a corporation duly organized and in good standing under the laws of the State of Nevada; (ii) the execution, delivery and performance of this Agreement by LICENSOR has been duly authorized by all necessary action on the part of LICENSOR’s directors and officers and does not violate, conflict with, or require the consent or approval of any third party pursuant to, any state or local law or regulation applicable to LICENSOR or any contract or legally binding obligation to which LICENSOR is subject; (iii) this Agreement constitutes the valid and binding obligation of LICENSOR enforceable against LICENSOR in accordance with its terms; and (iv) the Technology and Licensed Patents do not infringe any third-party rights.


  8)

Confidentiality. In addition to the Confidentiality Agreement entered into by the Parties on September 8, 2016, at all times during the term of this Agreement (including any renewal term) and thereafter, LICENSEE will not use or disclose and will otherwise keep confidential any trade secrets or proprietary information, including, but not limited to the Technology and other intellectual property of LICENSOR (collectively, the “ Confidential Information ”) except to the extent required to perform its obligations under this Agreement. Without limitation of the foregoing, LICENSEE will hold the Confidential Information in confidence and will (a) exercise the same degree of care, but no less than a reasonable degree of care, to prevent its disclosure as LICENSEE would take to safeguard its own confidential or proprietary information, and (b) limit disclosure of Confidential Information, including any notes, extracts, analyses or materials that would disclose Confidential Information, solely to those of its employees who need to know the information for purposes of performing its obligations under this Agreement and who agree to keep such information confidential. Upon termination of this Agreement, LICENSEE shall immediately return all Confidential Information to LICENSOR and LICENSOR shall have the right to conduct an on-site audit of the LICENSEE within three (3) business days of termination to ensure compliance with the terms of this Agreement, at LICENSOR’S expense.




  a)

Limitations. This section does not apply to any information that: (a) is already lawfully in the receiving Party's possession (unless received pursuant to a nondisclosure agreement); (b) is or becomes generally available to the public through no fault of the receiving Party; (c) is disclosed to the receiving Party by a third party who may transfer or disclose such information without restriction; (d) is required to be disclosed by the receiving Party as a matter of law (provided that the receiving Party will use all reasonable efforts to provide the disclosing Party with prior notice of such disclosure and to obtain a protective order therefor, with all costs to be borne by the disclosing Party); (e) is disclosed by the receiving Party with the disclosing Party's approval; or (f) is independently developed by the receiving Party without any use of confidential information. In all cases, the receiving Party will use all reasonable efforts to give the disclosing Party ten (10) days' prior written notice of any disclosure of information under this Agreement. The Parties will maintain the confidentiality of all confidential and proprietary information learned pursuant to this Agreement for a period of ten (10) years from the date of termination of this Agreement.

     
  b)

Saving Provision . The Parties agree and stipulate that the agreements contained in this Section are fair and reasonable in light of all of the facts and circumstances of their relationship; however, the Parties are aware that in certain circumstances courts have refused to enforce certain agreements. Therefore, in furtherance of and not in derogation of the provisions of the preceding paragraph the parties agree that in the event a court should decline to enforce the provisions of the preceding paragraph, that paragraph shall be deemed to be modified to restrict non-enforcing Party’s rights under this Agreement to the maximum extent, in both time and geography, which the court shall find enforceable.


  9)

Injunctive Relief. The Parties agree that any breach of this Agreement by LICENSEE shall cause LICENSOR immeasurable and irreparable harm and LICENSOR shall be entitled to seek immediate injunctive relief from any court of competent jurisdiction, in addition to any other remedies that LICENSOR may have at law or in equity.

     
  10)

Indemnification.


  a)

LICENSEE agrees to indemnify LICENSOR and hold LICENSOR harmless from and against any and all liabilities, losses and expenses arising from (i) LICENSEE’s unauthorized use of the Technology; (ii) LICENSEE’s failure to comply with applicable laws or to maintain all required licenses and governmental authorizations; (iii) any breach of LICENSEE’s representations and warranties set forth herein; and (iv) any liability to third parties as a result of LICENSEE’s production, distribution and/or sale of End Products, except as to any liability arising out of the proper use of the Technology.

     
  b)

LICENSOR agrees to indemnify LICENSEE and hold LICENSEE harmless from and against any and all liabilities, losses and expenses arising from (i) any breach of LICENSOR’s representations and warranties set forth herein; and (ii) any claims of infringement raised by third parties as to the Technology or Licensed Patents.


  11)

Limitation of Liability. EXCEPT TO THE EXTENT OTHERWISE EXPRESSLY AGREED TO IN THIS AGREEMENT, NEITHER PARTY SHALL BE LIABLE TO THE OTHER PARTY FOR LOST PROFITS OR FOR ANY DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, SPECIAL, PUNITIVE OR EXEMPLARY DAMAGES IN CONNECTION WITH THIS AGREEMENT OR THE TRANSACTIONS CONTEMPLATED BY THIS AGREEMENT, HOWEVER CAUSED, UNDER ANY THEORY OF LIABILITY. THE FOREGOING SHALL NOT LIMIT LICENSEE’S LIABILITY FOR UNAUTHORIZED USE BY LICENSEE OF LICENSOR’S TECHNOLOGY.




12)

No Warranties. OTHER THAN THE EXPRESS WARRANTIES PROVIDED HEREIN, LICENSOR MAKES NO EXPRESS WARRANTIES OF MERCHANTABILITY OR FITNESS OR EFFICACY FOR A PARTICULAR PURPOSE OF THE TECHNOLOGY AND/OR ANY END PRODUCTS PRODUCED FROM SAID TECHNOLOGY AND SHALL NOT BE HELD LIABLE FOR PROFITABILITY OF TECHNOLOGY AND/OR END PRODUCTS OR HELD LIABLE UNDER ANY OTHER THEORY OF LIABILITY.

     
  13)

Insurance. For the period of time required to cover its obligations hereunder, each Party will maintain third party provided insurance in types and amounts customary for the type of business it conducts, and in any event reasonably adequate to cover any liabilities arising out of its obligations hereunder . Further, LICENSEE will maintain product liability insurance reasonably adequate to cover any liabilities arising out of the sale and distribution of End Products. Upon a Party’s request, the other Party will provide to the requesting Party a certificate of insurance showing that such insurance is in place, which certificate shall demonstrate the amounts, exclusions and deductibles of such insurance coverage. Each Party shall notify the other Party in writing no less than thirty (30) days prior to the cancellation, termination or modification of the insurance coverage(s) described in the notifying Party’s insurance certificate(s). Nothing in this Section shall in any way be construed to limit the liability of a Party under this Agreement.


  14)

Compliance with Laws. In connection with this Agreement, LICENSEE agrees to comply with all applicable laws, statutes and ordinances of any governmental authority, including, but not limited to, the MED and the City of ******* , that may be applicable to LICENSEE, its activities under this Agreement or the End Products.

     
  15)

Conformance with Regulations. The Parties acknowledge and agree that this Agreement, and the licensing of the Technology, is neither intended to convey any ownership interest in LICENSEE to LICENSOR nor grant LICENSOR any control over LICENSEE. In the event that the MED indicates otherwise with regards to this Agreement or any portion thereof, then the Parties shall promptly negotiate in good faith for a period of forty-five (45) days to modify this Agreement in order to conform with any guidance proffered by the MED. In the event the Parties cannot reach an agreement within forty-five (45) days’ notice by the MED or the City that this Agreement must be reformed, this Agreement shall terminate pursuant to Section 5 above, and the Parties shall thereafter have no further obligation to each other hereunder.

     
  16)

Employees; Agents; Representatives. Employees, agents and/or representatives, if any, of either Party, including LICENSEE’s Partner, who perform services for either Party pursuant to this Agreement shall also be bound by the provisions of this Agreement.

     
  17)

Relationship of Parties. The legal relationship of the Parties is exclusively that of licensor and licensee and no employer-employee, principal-agent, partnership, franchise, agency, joint venture or other legal relationship is created by this Agreement. Neither Party shall have the authority to enter into any contracts on behalf of the other Party.




  18)

Successors; Assignment; Binding Agreement. Except as otherwise provided in this Agreement, LICENSEE may not assign or transfer its rights or delegate its obligations under this Agreement without LICENSOR’S prior written consent. LICENSOR may freely assign this Agreement or any rights under this Agreement, or delegate any duties under this Agreement without LICENSEE’s consent. This Agreement inures to the benefit of, and shall be binding upon, the successors and assigns of the parties to this Agreement. This Agreement and all of its provisions and conditions are for the sole and exclusive benefit of the Parties and their respective successors and permitted assigns.

     
  19)

Modifications and Waivers. This Agreement may be amended only by a written agreement signed by both Parties. With regard to any power, remedy or right provided in this Agreement, no waiver or extension of time shall be effective unless expressly contained in a writing signed by the waiving Party, no alteration, modification or impairment shall be implied by reason of any previous waiver, extension of time, delay or omission in exercise or other indulgence, and waiver by any Party of the time for performance of any act or condition hereunder does not constitute a waiver of the act or condition itself.

     
  20)

Notice. Except as otherwise provided in this Agreement, notices required to be given pursuant to this Agreement shall be effective when received, and shall be sufficient if given in writing, hand- delivered, sent by facsimile with confirmation of receipt, sent by First Class Mail, return receipt requested (for all types of correspondence), postage prepaid, or sent by overnight courier service and addressed as set forth below, or as amended by either Party, respectively, from time to time:


*******
*******
*******
*******
*******

If to LICENSOR:
Lexaria Bioscience Corp.
950, 1130 W. Pender Street
Vancouver, British Columbia
V6E 4A4
Canada
Attn: Chris Bunka

No objection may be made to the manner of delivery of any notice or other communication in writing actually received by a Party.

  21)

Entire Agreement. This Agreement, including the attached exhibits, constitutes the entire agreement of the Parties hereto relating to the subject matter hereof and there are no written or oral terms or representations made by either Party other than those contained herein.

     
  22)

Publicity. Without the prior written consent of the other Party, neither Party shall disclose the terms and conditions of this Agreement, except disclosure may be made as is reasonably necessary to the disclosing Party's bankers, attorneys, or accountants or except as may be required by law. The Parties understand and agree that LICENSOR may be compelled by Federal or State regulators to publicly disclose the signing of said License Agreement naming both Parties. If LICENSOR is compelled by Federal or State regulators to publicly disclose the signing of said License Agreement, LICENSOR will share its planned announcement with LICENSEE beforehand for LICENSEE’s review and approval, not to be unreasonably withheld or delayed, and it will also ensure that no compromise of the LICENSEE’s existing secret processes or intellectual property, nor of LICENSEE`S personal or private information occurs through this announcement.




  23)

Expenses. Each Party to this Agreement shall bear all of its own expenses in connection with the execution, delivery and performance of this Agreement and the transactions contemplated hereby, including without limitation all fees and expenses of its agents, representatives, counsel and accountants.

     
  24)

Governing Law; Jurisdiction. The validity, interpretation, construction, performance and enforcement of this Agreement shall be governed by the laws of the State of Colorado, regardless of the choice of law provisions of Colorado or any other jurisdiction.

     
  25)

Dispute Resolution.


  a)

Mandatory Procedures . The Parties agree that any dispute arising out of or relating to this Agreement shall be resolved solely by means of the procedures set forth in this Section and that such procedures constitute legally binding obligations that are an essential provision of this Agreement. If either Party fails to observe the procedures of this Section, as may be modified by their written agreement, the other Party may bring an action for specific performance of these procedures in any court in the State of Colorado.

     
  b)

Equitable Remedies . Although the procedures specified in this Section are the sole and exclusive procedures for the resolution of disputes arising out of or relating to this Agreement, either Party may seek a preliminary injunction or other provisional equitable relief if, in its reasonable judgment, such action is necessary to avoid irreparable harm to itself or to preserve its rights under this Agreement.

     
  c)

Dispute Resolution Procedures .


  i)

Mediation . In the event any dispute arising out of or relating to this Agreement remains unresolved within sixty (60) days from the date the affected party informed the other party of such dispute, either party may initiate mediation upon written notice to the other party (“Notice Date”), whereupon both parties shall be obligated to engage in a mediation proceeding under the then current Center for Public Resources (“CPR”) Model Procedure for Mediation of Business Disputes (www.cpradr.org), except that specific provisions of this Article shall override inconsistent provisions of the CPR Model Procedure. The mediator will be selected from the CPR Panels of Neutrals. If the parties cannot agree upon the selection of a mediator within fifteen (15) business days after the Notice Date, then upon the request of either party, the CPR shall appoint the mediator. The parties shall attempt to resolve the dispute through mediation until the first of the following occurs: (i) the parties reach a written settlement, (ii) the mediator notifies the parties in writing that they have reached an impasse, (iii) the parties agree in writing that they have reached an impasse, or (iv) the parties have not reached a settlement within sixty (60) days after the Notice Date.

     
  ii)

If the Parties fail to resolve the dispute through mediation, or if neither Party elects to initiate mediation, each Party shall have the right to pursue any other remedies legally available to resolve the dispute.


  d)

Performance to Continue . Each Party shall continue to perform its undisputed obligations under this Agreement pending final resolution of any dispute arising out of or relating to this Agreement; provided, however, that a Party may suspend performance of its undisputed obligations during any period in which the other Party fails or refuses to perform its undisputed obligations. Nothing in this Section is intended to relieve LICENSEE from its obligation to make undisputed payments pursuant to Section 5 of this Agreement.




  e)

Statute of Limitations . The Parties agree that all applicable statutes of limitation and time-based defenses (such as estoppel and laches) shall be tolled while the procedures set forth in this Section are pending. The Parties shall cooperate in taking any actions necessary to achieve this result.


  26)

Attorneys’ Fees. In the event of any dispute between the parties arising out of this Agreement, the prevailing Party shall be entitled, in addition to any other rights and remedies it may have, to recover its reasonable attorneys’ fees and costs.

     
  27)

No Interpretation Against Drafter. Each Party participated in the negotiation and drafting of this Agreement, assisted by such legal and tax counsel as it desired, and contributed to its revisions. Any ambiguities with respect to any provision of this Agreement will be construed fairly as to all Parties and not in favor of or against any Party. All pronouns and any variation thereof will be construed to refer to such gender and number as the identity of the subject may require. The terms “include” and “including” indicate examples of a predicate word or clause and not a limitation on that word or clause.

     
  28)

Headings. The headings of Sections are provided for convenience only and will not affect the construction or interpretation of this Agreement.

     
  29)

Force Majeure. Neither Party shall be liable for any delay or failure to perform its obligations in this Agreement if such delay or failure to perform is due to any cause or condition reasonably beyond that Party’s control, including, but not limited to, acts of God, war, government intervention, riot, embargoes, acts of civil or military authorities, earthquakes, fire, flood, accident, strikes, inability to secure transportation, facilities, fuel, energy, labor or materials.

     
  30)

Survival. In addition to LICENSEE’s obligation to pay LICENSOR all amounts due hereunder, the Parties obligations under this Agreement shall survive expiration or termination of the Agreement only as expressly provided herein

     
  31)

Invalidity. The invalidity or unenforceability of any term or terms of this Agreement shall not invalidate, make unenforceable or otherwise affect any other term of this Agreement which shall remain in full force and effect.

     
  32)

Severability. If any terms or provisions of this Agreement shall be found to be illegal or unenforceable, notwithstanding, this Agreement shall remain in full force and effect and such terms or provisions shall be deemed stricken.

     
  33)

Further Assurances. Upon a Party’s reasonable request, the other Party shall, at requester’s sole cost and expense, execute and deliver all further documents and instruments, and take all further acts, as are reasonably necessary to give full effect to this Agreement.

     
  34)

Counterparts. The Parties may execute this Agreement in multiple counterparts, each of which will constitute an original and all of which, when taken together, will constitute one and the same agreement.



NOW, THEREFORE, in consideration of the premises and the mutual promises and conditions hereinafter set forth, and other good and valuable consideration, the receipt and sufficiency of which are hereby acknowledged, the Parties, intending to be legally bound, do hereby agree as follows:

IN WITNESS WHEREOF , the parties have executed this Agreement intending to be legally bound as of the date set forth above.

“LICENSOR” “LICENSEE”
LEXARIA BIOSCIENCE CORP. *******

By:      By:   
  John Docherty, President     ******* CEO
         
         
         
By:        
  Chris Bunka, CEO      



EXHIBIT A

TECHNOLOGY

The Technology consists of (1) the following five (5) U.S. Provisional Patent Applications and one (1) PCT International Patent Application; and (2) all technical know-how and trade secrets in regard to such named patents, including the use, manufacture or formulation thereof, that is owned or controlled by LICENSOR as of the Effective Date of this Agreement, as well as any future continuations, continuations in part or divisional applications filed pursuant to the five U.S. and one International Patent Applications. (the “ Licensed Patents ”):

U.S. Provisional Patent Application No. 62/010,601, filed June 11, 2014.

U.S. Provisional Patent Application No. 62/037,706, filed August 15, 2014.

U.S. Provisional Patent Application No. 62/153,835, filed April 28, 2015.

U.S. Provisional Patent Application No. 62/161,324, filed May 14, 2015.

U.S. Utility Patent Application No. 14/735,844, filed June 10, 2015.

PCT International Patent Application No. PCT/US15/35128, filed June 10, 2015.


EXHIBIT B

END PRODUCTS

Product Line Name Product Line Description
******* *******
******* *******
******* *******


EXHIBIT C

LICENSE FEE

Upon execution of this Agreement, LICENSEE shall pay to LICENSOR the License Fee as set forth below. The License Fee shall be paid in accordance with Section 5 of this Agreement.

  (a)

Territory License Fee. LICENSEE agrees to pay to LICENSOR a signing and exclusivity and/or semi-exclusivity (depending on the Product Lines implemented) license fee of ******* (“ Territory License Fee ”). The Territory License Fee shall be paid as follows: ******* If LICENSEE exercises a License Option pursuant to Section 2c for additional territories, LICENSEE agrees to pay a Territory License Fee for each additional territory.

       
  (b)

Usage License Fee. For each Product Line in the Territory, only for the period of time a Product Line is actively being sold, LICENSEE agrees to pay to LICENSOR a usage license fee of a total of ******* (the “ Usage License Fee ”) in ******* according to the schedule provided below in this Section. If LICENSEE exercises a License Option pursuant to Section 2c for additional territories, LICENSEE agrees to pay a Usage License Fee for each Product Line within each additional territory.

       
  (i)

For ******* Product Line: LICENSEE will agree to pay to LICENSOR a Usage License Fee of a total of ******* upon entering into this Agreement, as an ongoing ******* fee payable as follows: *******   with the understanding that if any of these quarterly payments are still remaining to be paid at the end of the two year Term of this Agreement they are due in full at that time, unless otherwise cancelled under Section 4.b. or 4.c. of this Agreement. This Usage License Fee schedule shall repeat for whichever Product Line LICENSEE launches first in each additional Territory upon LICENSEE exercising its option to enter each Territory as per Section 2;




  (ii)

For All Other Product Lines: *******


  (c)

Severance Fee, if applicable. A Usage License Fee shall be paid for each Product Line that is then in production and being sold, unless otherwise agreed to by the Parties. As provided for in Section 2(e), LICENSEE may elect to end sales of a Product Line at its sole discretion with a severance fee (“ Severance Fee”) immediately then due which is ******* but all other Usage License Fees are waived. If LICENSEE elects to end sales of any Product Line, then any other licensing provision benefits with that Product Line also end at that time.




Definitive Technology Licensing Agreement Reached

 

Kelowna, BC / May 20, 2016 / Lexaria Bioscience Corp. (OTCQB:LXRP) (CSE:LXX) (the “Company”) is very pleased to announced it has entered into the definitive agreement first announced in a Letter of Intent dated March 22, 2016, to license its patent pending technology for the purpose of entering the U.S. regulated medical and adult use cannabis edibles marketplace. This agreement marks a major milestone for the Company: the first contracted, predictable and significant revenue streams to be achieved as a direct result of Lexaria’s technological advantages in the marketplace.

Under the terms of the agreement and as earlier announced, the Licensee will pay a minimum of US$122,000 in pre-defined staged payments to Lexaria over the initial two-year term, which will commence in the state of Colorado. The agreement contemplates significant opportunities to expand, both in scope of products offered in Colorado as well as to other states such as California, Washington, and Oregon. As per the Agreement, if the Licensee were to introduce certain product lines utilizing Lexaria’s technology in each of the four states contemplated, for example, then Lexaria could expect to receive a maximum of $1,064,000 over approx 3 ½ years, and the Licensee would enjoy semi-exclusivity to introduce its quality products in each of those states.

The Licensee is preparing its outstanding products for the marketplace at this time, and Lexaria is further protecting competitive advantages by seeking to maintain the confidentiality of certain strategic information from the industry. Lexaria is not itself producing any products under the agreement, and instead is making its technology available to the Licensee and state-licensed partners.

Lexaria continues discussions with other companies also interested in licensing Lexaria’s absorption technology that provides for improved food consumption experiences and performance. Lexaria’s technology provides significant competitive advantages to its licensed partners, such as flavour enhancement without the use of large amounts of sweeteners; and of course, higher bioavailability both by total quantity of bioactive substance that is absorbed as well as enhancing how quickly this occurs. These advantages lead to higher quality experiences for consumers while delivering competitive advantages to companies utilizing the technology.

“We could not be more pleased to see our technology being utilized within new sectors,” said John Docherty, President of Lexaria. “Our technology enables superior experiences for customers as evidenced in in vitro testing conducted to date, and our partner is making a strong commitment to provide their customers with the very best that cutting edge science and technology can provide.”

Attorneys with expertise in intellectual property law and cannabis-specific practices have come together to create one of the first technology licensing agreements of its kind with application to cannabinoids. Lexaria Bioscience has received requests from companies located in North America, Europe, and the Caribbean related to applications for its technology for enhancing the delivery of other payload molecules including but not limited to cannabinoids and is actively evaluating other technology licensing opportunities which it will disclose in due course.


“We’ve been transparent with stakeholders as to the validity and application of our encapsulation technology and that we would leverage it with licensed partners for mutual benefit,” said Chris Bunka, CEO of Lexaria. “There is great complexity in defining and constructing precise and lasting agreements and these require thoughtful consideration. Our goal remains to place our technology in food products across America and internationally, not only within the cannabinoid food sector, but also with vitamins, NSAIDs and more, creating entirely new and unprecedented product categories.”

Lexaria’s unique patent pending technology allows for more efficient and effective absorption of certain molecules such as vitamins and cannabinoids, while simultaneously masking and at times even eliminating inherent strong flavours and/or odors typical of those molecules. Lexaria’s technology is extremely cost effective to implement and applicable to the widest imaginable spectrum of foods including but not limited to chocolates, candies, coffee, tea, a wide variety of other beverages, protein bars, cookies, pastas, entrees, breads, and much more.

About Lexaria
Lexaria Bioscience Corp. is a food sciences company focused on the delivery of active compounds that can behave as superfoods through its proprietary infusion technologies. Lexaria’s technology enables higher bioavailability rates for CBD; THC; NSAIDs; Nicotine and other molecules than is possible without lipophilic enhancement technology. This can allow for lower overall dosing requirements and/or higher effectiveness in active molecule delivery. Lexaria hopes to reduce other common but less healthy ingestion methods such as smoking as it embraces the benefits of public health. www.lexariaenergy.com FOR FURTHER INFORMATION PLEASE CONTACT:

Lexaria Bioscience Corp.
Chris Bunka
Chairman & CEO
(250) 765-6424


FORWARD-LOOKING STATEMENTS

This release includes forward-looking statements. Statements which are not historical facts are forward-looking statements. The Company makes forward-looking public statements concerning its expected future financial position, results of operations, cash flows, financing plans, business strategy, products and services, competitive positions, growth opportunities, plans and objectives of management for future operations, including statements that include words such as "anticipate," "if," "believe," "plan," "estimate," "expect," "intend," "may," "could," "should," "will," and other similar expressions are forward-looking statements, including but not limited to: any revenue or license fee payments that may be realized from the license agreement, the introduction of any product lines that are derived from the license agreement, that any similar license arrangements may be entered into with other companies or partners, that the Company’s technology enables higher rates of absorption of certain molecules such as vitamins and cannabinoids while simultaneously masking and at times even eliminating inherent strong flavors and/or odors typical of those molecules, or that the technology will function in a similar manner if tested with THC, nicotine, or any of the other molecules named in our patent applications. Such forward-looking statements are estimates reflecting the Company's best judgment based upon current information and involve a number of risks and uncertainties, and there can be no assurance that other factors will not affect the accuracy of such forward-looking statements. Access to capital, or lack thereof, is a major risk and there is no assurance that the Company will be able to raise required working capital. Factors which could cause actual results to differ materially from those estimated by the Company include, but are not limited to, government regulation, managing and maintaining growth, the effect of adverse publicity, litigation, competition, the patent application and approval process and other factors which may be identified from time to time in the Company's public announcements and filings. There is no assurance that the license agreement, hemp oil sector, or alternative health businesses will provide any benefit to Lexaria, or that the Company will experience any growth through participation in these sectors or as a result of the license agreement. There is no assurance that existing capital is sufficient for the Company's needs or that it will be able to raise additional capital. There is no assurance that the Company will receive all or any part of the $122,000 to $1,064,000 in payments contemplated under the definitive license agreement. There is no assurance that Lexaria will successfully complete any other contemplated or existing technology license agreements, nor that Lexaria’s technology will deliver any improvement in taste or bioavailability with any reliability nor across any product category. There is no assurance that any planned corporate activity, business venture, or initiative will be pursued, or if pursued, will be successful. There is no assurance that any hemp oil or cannabinoid-based product will promote, assist, or maintain any beneficial human health conditions whatsoever, nor that any patent application in the USA or any other nation or under any treaty will result in the award of an actual patent; nor that an award of any actual patent will protect against challenges from unknown third parties. There is no assurance that a definitive agreement will be reached to license the Company’s technology to any third party in return for compensation. There is no assurance that any of Lexaria’s postulated uses, benefits, or advantages for the patent-pending technology will in fact be realized in any manner or in any part. No statement herein has been evaluated by the Food and Drug Administration (FDA). ViPova TM products are not intended to diagnose, treat, cure or prevent any disease.

The CSE has not reviewed and does not accept responsibility for the adequacy or accuracy of this release.