Exhibit 10.1
UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
FORM 8-K
CURRENT REPORT
Pursuant to Section 13 OR 15(d) of The Securities Exchange Act of 1934
| Date of Report (Date of earliest event reported) | April 23, 2020 |
|
ENCISION, INC. |
||
|
(Exact name of registrant as specified in its charter)
|
||
| Colorado | 001-11789 | 84-1162056 |
|
(State or other jurisdiction
of incorporation) |
(Commission
File Number) |
(I.R.S. Employer
|
| 6797 Winchester Circle, Boulder, Colorado | 80301 | |
| (Address of principal executive offices) |
(Zip Code)
|
|
| Registrant’s telephone number, including area code | (303) 444-2600 |
|
|
|
| (Former name or former address, if changed since last report.) | |
| Check the appropriate box below if the Form 8-K filing is intended to simultaneously satisfy the filing obligation of the registrant under any of the following provisions (see General Instruction A.2. below): | |
| ☐ Written communications pursuant to Rule 425 under the Securities Act (17 CFR 230.425) | |
| ☐ Soliciting material pursuant to Rule 14a-12 under the Exchange Act (17 CFR 240.14a-12) | |
| ☐ Pre-commencement communications pursuant to Rule 14d-2(b) under the Exchange Act (17 CFR 240.14d-2(b)) | |
| ☐ Pre-commencement communications pursuant to Rule 13e-4(c) under the Exchange Act (17 CFR 240.13e-4(c)) | |
Securities registered pursuant to Section 12(b) of the Act:
| Title of each class |
Trading Symbol(s) |
Name of each exchange on which registered |
||
| Common Stock, no par value | ECIA | OTC Bulletin Board |
Emerging growth company ☐
If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐
|
|
| Item 1.01 | Entry into a Material Definitive Agreement. |
On April 17, 2020, Encision, Inc. (the “Company” entered into an unsecured promissory note under the Paycheck Protection Program (the “PPP”), through Bank of America with a principal amount of $598,567. The PPP was established under the recently congressionally approved Coronavirus Aid, Relief, and Economic Security Act (the “CARES Act”) and is administered by the U.S. Small Business Administration (the “SBA”).
The term of the PPP loan is two years. The interest rate on each PPP loan is 1.0% per annum, which shall be deferred for the first six months of the term of the loan. After the initial six-month deferral period, the loan requires monthly payments of interest until maturity with respect to any portion the PPP loan which is not forgiven as described below. The Company is permitted to prepay or partially prepay the PPP loan at any time with no prepayment penalties.
Under the terms of the CARES Act, PPP loan recipients can apply for, and be granted, forgiveness for all or a portion of loans granted under the PPP. Such forgiveness will be determined, subject to limitations and ongoing rulemaking by the SBA, based on the use of loan proceeds for payroll costs and mortgage interest, rent or utility costs and the maintenance of employee and compensation levels. No assurance is provided that the Company will obtain forgiveness of the PPP loans in whole or in part.
The foregoing description of the PPP loan does not purport to be complete and is qualified in its entirety by reference to the PPP note filed as Exhibit 10.1 to this Current Report on Form 8-K and incorporated herein by reference.
| Item 2.03 | Creation of a Direct Financial Obligation or an Obligation under an Off-Balance Sheet Arrangement of a Registrant. |
The information contained in Item 1.01 of this Current Report on Form 8-K is incorporated herein by reference.
| Item 8.01 | Other Events. |
On April 23, 2020, the Company issued a press release disclosing the events set forth in this Report.
A copy of the press release is attached hereto as Exhibit 99.1 and incorporated herein by reference. The information in this Item 8.01 of this Current Report is being furnished and shall not be deemed “filed” for the purposes of Section 18 of the Securities Exchange Act of 1934 or otherwise subject to the liabilities of that Section. The information in this Item 8.01 of this Report shall not be incorporated by reference into any registration statement or other document pursuant to the Securities Act, except as shall be expressly set forth by specific reference in any such filing.
| Item 9.01 | Financial Statements and Exhibits. |
(d) Exhibits.
| 10.1 | PPP Promissory Note dated as of April 17, 2020 |
| 99.1 | Press Release issued by Encision, Inc., April 22, 2020 |
|
|
SIGNATURES
Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned hereunto duly authorized.
| ENCISION, INC. | |
| (Registrant) | |
| Date: April 23, 2020 | |
| /s/ Mala M Ray | |
| Mala M Ray | |
| Controller | |
| Principal Accounting Officer |
Exhibit 10.1
Exhibit 99.1
April 23, 2020
Encision Receives PPP Financing
Boulder, Colorado, April 23, 2020 -- Encision Inc. (PK:ECIA), a medical device company owning patented Active Electrode Monitoring (AEM®) Technology that prevents dangerous stray electrosurgical burns in minimally invasive surgery, today announced that it entered into an unsecured promissory note under the Paycheck Protection Program (the “PPP”) for a principal amount of $598,567. The PPP was established under the recently congressionally approved Coronavirus Aid, Relief, and Economic Security Act (the “CARES Act”)
The term of the PPP loan is for two years with an interest rate of 1.0% per year, which will be deferred for the first six months of the term of the loan. After the initial six-month deferral period, the loan requires monthly payments of principal and interest until maturity with respect to any portion of the PPP loan which is not forgiven. Under the terms of the CARES Act, a PPP loan recipient may apply for, and be granted, forgiveness for all or a portion of loans granted under the PPP. Such forgiveness will be determined based upon the use of loan proceeds for payroll costs, rent and utility costs, and the maintenance of employee and compensation levels.
“We’re pleased to have received this funding,” said Greg Trudel, President & CEO of Encision. “We appreciate the effort of Bank of America in facilitating us through the process. We look forward to bringing our team back to a renewed energy in manufacturing performance, engineering innovation and new AEM Technology products introduction.”
Encision Inc. designs and markets a portfolio of high-performance surgical instrumentation that delivers advances in patient safety with AEM technology, surgical performance, and value to hospitals across a broad range of minimally invasive surgical procedures. Based in Boulder, Colorado, the company pioneered the development and deployment of Active Electrode Monitoring, AEM technology, to eliminate dangerous stray energy burns during minimally invasive procedures. For additional information about all our products, please visit www.encision.com.
In accordance with the safe harbor provisions of the Private Securities Litigation Reform Act of 1995, the Company notes that statements in this press release and elsewhere that look forward in time, which include everything other than historical information, involve risks and uncertainties that may cause actual results to differ materially from those indicated by the forward-looking statements. Factors that could cause the Company's actual results to differ materially include, among others, its ability to develop new or enhanced products and have such products accepted in the market, its ability to increase net sales through the Company's distribution channels, its ability to compete successfully against other manufacturers of surgical instruments, insufficient quantity of new account conversions, insufficient cash to fund operations, delay in developing new products and receiving FDA approval for such new products and other factors discussed in the Company's filings with the Securities and Exchange Commission. Readers are encouraged to review the risk factors and other disclosures appearing in the Company’s Annual Report on Form 10-K for the year ended June 30, 2019 and subsequent filings with the Securities and Exchange Commission. We do not undertake any obligation to update publicly any forward-looking statements, whether as a result of the receipt of new information, future events, or otherwise.
CONTACT: Mala Ray, Encision Inc., 303-444-2600, mray@encision.com