Exhibit 96.1

Technical Report Summary Berwind Complex Prepared for Ramaco Resources, Inc.

Notice

Weir International, Inc. (WEIR) was retained by Ramaco Resources, Inc. (Ramaco) to prepare this Technical Report Summary (TRS) related to Ramaco’s Berwind Complex. This report provides a statement of Ramaco’s coal reserves and resources at its Berwind Complex, and has been prepared in accordance with the United States Securities and Exchange Commission (SEC), Regulation S-K 1300 for Mining Property Disclosure (S-K 1300) and 17 Code of Federal Regulations (CFR) § 229.601(b)(96)(iii)(B) reporting requirements. This report was prepared for the sole use of Ramaco, and its affiliates and is effective as of December 31, 2022.

This report was prepared by full-time WEIR personnel who meet the SEC’s definition of Qualified Persons (QPs) with sufficient experience in the relevant type of mineralization and deposit under consideration in this report.

In preparing this report, WEIR relied upon data, written reports and statements provided by Ramaco. WEIR has taken all appropriate steps, in its professional opinion, to ensure information provided by Ramaco is reasonable and reliable for use in this report.

The accuracy of reserve and resource estimates are, in part, a function of the quality and quantity of available data at the time this report was prepared. Estimates presented herein are considered reasonable. However, they should be accepted with the understanding that with additional data and analysis available subsequent to the date of this report, the estimates may necessitate revision which may be material. Certain information set forth in this report contains “forward-looking information”, including production, productivity, operating costs, capital costs, sales prices, and other assumptions. These statements are not guarantees of future performance and undue reliance should not be placed on them. The assumptions used to develop the forward-looking information and the risks that could cause the actual results to differ materially are detailed in the body of this report.

WEIR and its personnel are not affiliates of Ramaco or any other entity with ownership, royalty or other interest in the subject property of this report.

Weir International, Inc. hereby consents to the use of Ramaco’s Berwind Complex coal reserve and resource estimates as of December 31, 2022.

Technical Report Summary Berwind Complex Prepared for Ramaco Resources, Inc.

TABLE OF CONTENTS

Technical Report Summary Berwind Complex Prepared for Ramaco Resources, Inc.

Technical Report Summary Berwind Complex Prepared for Ramaco Resources, Inc.

Technical Report Summary Berwind Complex Prepared for Ramaco Resources, Inc.

 

		Page
18.0	Capital and Operating Costs	95
18.1	Capital Expenditures	95
18.2	Operating Costs and Risks	96
19.0	Economic Analysis	101
19.1	Assumptions, Parameters, and Methods	101
19.2	Economic Analysis and Annual Cash Flow Forecast	104
19.3	Sensitivity Analysis	105
20.0	Adjacent Properties	107
21.0	Other Relevant Data and Information	108
22.0	Interpretations and Conclusions	109
22.1	Summary of Interpretations and Conclusions	109
22.2	Significant Risks and Uncertainties	109
23.0	Recommendations	112
24.0	References	113
25.0	Reliance on Information Provided by the Registrant	114

Technical Report Summary Berwind Complex Prepared for Ramaco Resources, Inc.

Technical Report Summary Berwind Complex Prepared for Ramaco Resources, Inc.

APPENDIX A - EXHIBITS

Technical Report Summary Berwind Complex Prepared for Ramaco Resources, Inc.

WEIR was retained by Ramaco Resources, Inc. (Ramaco) to prepare a Technical Report Summary (TRS) related to Ramaco’s Berwind Complex coal holdings. This report has been prepared in accordance with the United States Securities and Exchange Commission (SEC), Regulation S-K 1300 for Mining Property Disclosure (S-K 1300) and 17 Code of Federal Regulations (CFR) § 229.601(b)(96)(iii)(B) reporting requirements.

The Berwind Complex is located approximately 80 miles south of Charleston, West Virginia; 100 miles west of Roanoke, Virginia; 60 miles northeast of Kingsport, Tennessee; and 160 miles east/southeast of Lexington, Kentucky in the vicinity of 37.22 degrees North Latitude and 81.67 degrees West Longitude on the World Geodetic System (WGS 84) reference coordinate system. The complex includes areas in Buchanan and Tazewell Counties, Virginia and McDowell County, West Virginia. The Berwind Complex is within the Southwest Virginia and Southern West Virginia coal fields of the Central Appalachia Coal Producing (CAPP) Region of the United States (see Figure 1.1-1). As can be seen on Figure 1.1-1, the acquisition of the Amonate Property in late 2021 added significant acreage to the Berwind Complex.

The Berwind Complex consists of approximately 62,500 acres of owned and leased coal holdings. Approximately 52 percent of this acreage is in West Virginia and 48 percent is in Virginia. Currently, there are currently three active mines within the complex. The Berwind No. 1 Deep Mine is not currently operating, but is expected to resume production in April 2023.

Active Mines:

Evaluation of other prospective mining sites within the Berwind Complex is an on-going activity for Ramaco, as there are many opportunities to add additional mining operations.

Technical Report Summary Berwind Complex Prepared for Ramaco Resources, Inc.

Figure 1.1-1 General Location Map

Technical Report Summary Berwind Complex Prepared for Ramaco Resources, Inc.

The upper coal seams of interest within the Berwind Complex belong to the Norton Formation in Virginia of Early Pennsylvanian Age, which is stratigraphically equivalent to the Lower Kanawha and New River formations in southwestern West Virginia. The lower coal seams of interest belong to the Pocahontas Formation of the Pottsville Group (Lower Pennsylvanian). The depositional setting for these seams is complex and thought to be upper delta plain, with subsidence controlling the sedimentation rate. The Lower Pennsylvania (Pottsville) sedimentary strata of the coal-bearing rocks of the Pocahontas Formation rest uncomformably on the Mississippian Bluestone Formation of the Mauch Chunk Group.

Drilling has served as the primary form of exploration on the Berwind Complex. In addition to coal-specific exploration drillholes, data from degasification, coal bed methane, and water wells were also implemented to build the geological model. This model was built using a total of 4,188 exploration drillholes and covers the Berwind Complex, as well as the Knox Creek Complex. Approximately 1,900 of these drillholes are within the Berwind Complex.

In addition to exploration drillholes, coal seam outcrop measurements, in-mine measurements, and survey points taken from mine maps of previous operations were considered. A total of 194 seam outcrop measurements, 356 mine measurements, and 887 survey points were used in the geological model, as a supplement to the exploration drillholes.

It is WEIR’s opinion that the adequacy of sample preparation, security, and analytical procedures for holes that were drilled by Ramaco after acquiring the property are acceptable and that these analytical procedures meet typical industry standards.

The adequacy of sample preparation, security, and analytical procedures are generally unknown for holes that were drilled prior to Ramaco acquiring the initial leases in 2011. However, the geologist’s logs for these holes contain sampling descriptions and lithologic descriptions that are sufficiently detailed to ascertain that an experienced geologist supervised the drilling and sampling. It is unknown if all coal quality analyses were performed to ASTM standards by qualified laboratories, as detailed in Section 8.0, however, this legacy drillhole information was included as the samples matched the coal seam intervals and reported quality data that was consistent between the different data sources. Model verifications further support WEIR’s high level of confidence that a representative, valid, and accurate drillhole database and geological model have been generated for the Berwind Complex that can be relied upon to accurately estimate coal resources and reserves.

Technical Report Summary Berwind Complex Prepared for Ramaco Resources, Inc.

The Berwind Complex currently has three active mines. The three active mines consist of one surface mine with a highwall miner, and two underground room and pillar mines, which use continuous miners for coal production. Ramaco began production of metallurgical coal at the complex in 2017. A majority of the underground mines will implement retreat mining, which typically results in mining recovery of 50 to 80 percent. Contour mining has an average mining recovery of approximately 90 percent, and the highwall mine has an average mining recovery of approximately 40 percent.

The Berwind Complex is mining several seams and seam splits, including the Pocahontas 6, Pocahontas 5, Pocahontas 4, and Pocahontas 3 (in descending order).

Historical coal production from the Berwind Complex, in accordance with the Mine Safety and Health Administration (MSHA) statistics, is summarized in Table 1.4-1 as follows:

The current Berwind Complex Life-of-Mine (LOM) Plan projects mining through 2049, an expected mine life for the complex of 27 years. Ramaco projects total annual production to be approximately 0.9 million clean tons until a second super-section is started in the Berwind No. 1 Deep Mine in 2027. After 2027, average annual production is projected to be 1.2 million clean tons through 2040 when the Berwind No. 1 Deep Mine is nearing end of mine life. After this, the single-section Laurel Fork Deep Mine is currently planned to operate into 2049, at an average annual rate of approximately 307 thousand clean tons per year. However, it is likely future mines will be planned and scheduled as necessary, from resource areas within the complex, to meet internal Ramaco production goals aligned with market conditions.

Technical Report Summary Berwind Complex Prepared for Ramaco Resources, Inc.

All Run-of-Mine (ROM) coal is washed at the Berwind Preparation Plant. The Berwind Preparation Plant was initially built in 1955 and commissioned in 1957. Ramaco refurbished the preparation plant in 2021 and 2022 based on a design by Ramsey Industrial, with current ROM processing capacity of 600 tons per hour.

The Berwind Complex produces high quality, mid and low volatile metallurgical coal. Historically, the market for metallurgical coal from the Berwind Complex has been for both domestic metallurgical coal consumers and the global seaborne metallurgical coal market.

The Berwind Complex coal resources, as of December 31, 2022, are reported as in-place resources and are exclusive of reported coal reserve tons. Resources are reported in categories of Measured, Indicated and Inferred tonnage, in accordance with Regulation S-K Item 1302(d), summarized in Table 1.5-1 as follows:

Table 1.5-1 In-Place Coal Resource Tonnage and Quality Estimate,

as of December 31, 2022

Notes:

The conversion of resources to reserves at the Berwind Complex considers the design of a mine plan accommodating the planned mining equipment and executed in accordance with the MSHA rules and regulations, projected dilution and loss of product coal quality, projected coal sales prices, operating costs, and mineral control to determine if the saleable coal product will be economically mineable.

Technical Report Summary Berwind Complex Prepared for Ramaco Resources, Inc.

The coal reserves representing the economically viable tonnage controlled by Ramaco, and estimated in accordance with Regulation S-K Item 1302(e), is summarized in Table 1.5-2 as follows:

Table 1.5-2 Clean Recoverable Coal Reserve Tonnage and Quality Estimate, 

as of December 31, 2022

Notes:

WEIR prepared a Preliminary Feasibility Study financial model in order to assess the economic viability of the Berwind Complex LOM Plan. Specifically, plans were evaluated using discounted cash flow analysis, incorporating annual revenue projections for the Berwind LOM Plan. Cash outflows such as capital, including preproduction costs, sustaining capital, operating costs, transportation costs, royalties, and taxes are subtracted from cash inflows, resulting in annual cash flow projections. No adjustments are made for inflation and all cash flows are in 2022 United States dollars. WEIR’s study was conducted on an un-levered basis, excluding costs associated with any debt servicing requirements. In its assessment of the Discounted Cash Flow Net Present Value (DCF-NPV), WEIR utilized a discount rate of 10 percent.

Technical Report Summary Berwind Complex Prepared for Ramaco Resources, Inc.

The Preliminary Feasibility Study financial model developed for use in this TRS was meant to evaluate the prospects of economic extraction of coal within the Berwind Complex resource area. This economic evaluation is not meant to represent a project valuation. Furthermore, optimization of the LOM Plan was outside of the scope of this engagement.

The results of WEIR’s Preliminary Feasibility Study demonstrated an after-tax DCF-NPV of $405.7 million for the Berwind Complex LOM Plan. Key operational statistics for the LOM Plan, on an after-tax basis, are summarized in Table 1.6-1 as follows:

A sensitivity analysis was undertaken to examine the influence of changes to coal sales prices, production, operating cost, capital expenditures, and the discount rate on the base case after-tax NPV. The sensitivity analysis range (+/- 25 percent) was designed to capture the bounds of reasonable variability for each element analyzed.

The Berwind Complex NPV is most sensitive to changes in coal sales prices and operating costs. It is less sensitive to changes in production and least sensitive to changes in discount rate and capital expenditures.

Technical Report Summary Berwind Complex Prepared for Ramaco Resources, Inc.

As part of the permitting process required by the Virginia Department of Energy (VDE) and West Virginia Department of Environmental Protection (WVDEP), numerous baseline studies or impact assessments were undertaken by Ramaco. These baseline studies or impact assessments included in the permit are summarized as follows, with pertinent text from the permit replicated below:

Based on water samples from adjacent mining and the baseline surface water sampling, acid or toxic mine drainage is not expected or anticipated. All of the Ramaco existing and proposed mines are well above any significantly producing aquifers. Probable Hydrologic Consequence (PHC) studies showed no significant ground or surface water resource is likely to be contaminated, diminished, or interrupted, providing that the approved drainage control and revegetation plans are adhered to throughout existing and planned mining activities.

Coal mines in West Virginia are required to file applications for and receive approval of mining permits issued by the WVDEP to conduct surface disturbance and mining activities. Similar filings are required in Virginia through the VDE. The Berwind Complex has been issued mining permits and associated NPDES permits by the WVDEP and the VDE as shown in Table 1.7.-1 as follows:

Technical Report Summary Berwind Complex Prepared for Ramaco Resources, Inc.

As of December 31, 2022, Ramaco estimated an ARO reclamation liability of $4.9 million for its disturbed permit acreage, which is covered with a total bond amount of $3.6 million.

Ramaco currently employs approximately 210 personnel at the Berwind Complex and is projected to have maximum employment of 257 personnel through its Berwind Complex LOM Plan. The Berwind Complex also creates substantial economic value with its third-party service and supply providers, utilities, and through payment of taxes and fees to local, state and federal governments.

Ramaco’s environmental citations issued by the WVDEP and VDE are typical of similar citations issued to other operators in southern West Virginia and Southwestern Virginia. Most of these violations or citations were quickly abated and none were significant in nature.

Based on WEIR’s review of Ramaco’s plans for environmental compliance, permit compliance and conditions, and dealings with local individuals and groups, Ramaco’s efforts are adequate and reasonable in order to obtain necessary approvals relative to its mine plans.

Ramaco has a long operating history of resource exploration, mine development, and mining operations at the Berwind Complex, with extensive exploration data including drillholes, in-mine seam thickness and elevation measurements, and in-mine channel samples supporting the determination of mineral resource and reserve estimates, and economic viability. The data has been reviewed and analyzed by WEIR and determined to be adequate in quantity and reliability to support the coal resource and coal reserve estimates in this TRS.

Ramaco basically has full mineral control through current leases for all existing and planned mines included in the Berwind Complex LOM plan. There are approximately 62 acres out of 5,877 acres of the mine plan layout that are not currently controlled by Ramaco (1 percent uncontrolled). These tracts do not threaten the overall LOM plans. As similar for most mines, such uncontrolled tracts are either negotiated in time, or plans are modified to mine around any adverse tracts.

The coal resource and coal reserve estimates and supporting Preliminary Feasibility Study were prepared in accordance with Regulation S-K 1300 requirements. There are 629.0 million in-place tons of measured and indicated coal resources, exclusive of reserves, and 23.6 million tons of proven and probable clean recoverable underground mineable coal reserves within the Berwind Complex, as of December 31, 2022. Reasonable prospects for economic extraction were established through the development of a Preliminary Feasibility Study relative to the Berwind Complex LOM Plan, considering historical mining performance, historical and projected metallurgical coal sales prices, historical and projected mine operating costs, and recognizing reasonable and sufficient capital expenditures.

Technical Report Summary Berwind Complex Prepared for Ramaco Resources, Inc.

The ability of Ramaco, or any coal company, to achieve production and financial projections is dependent on numerous factors. These factors primarily include site-specific geological conditions, the capabilities of management and mine personnel, level of success in acquiring reserves and surface properties, coal sales prices and market conditions, environmental issues, securing permits and bonds, and developing and operating mines in a safe and efficient manner. Unforeseen changes in legislation and new industry developments could substantially alter the performance of any mining company.

Coal mining is carried out in an environment where not all events are predictable. While an effective management team can identify known risks and take measures to manage and/or mitigate these risks, there is still the possibility of unexpected and unpredictable events occurring. It is not possible therefore to totally remove all risks or state with certainty that an event that may have a material impact on the operation of a coal mine will not occur.

WEIR assessed that the risks associated with the economic mineability of the Berwind Complex were low to moderate and adds that the majority of the risks can be kept low and/or mitigated with efficient and effective mine planning and mine engineering, and monitoring of the mining operations.

WEIR recommends that any future exploration work and mineral property acquisition should include what has been historically implemented related to the following:

Technical Report Summary Berwind Complex Prepared for Ramaco Resources, Inc.

WEIR was retained by Ramaco (Nasdaq: METC) to prepare a TRS related to Ramaco’s Berwind Complex coal holdings.

The Berwind Complex is located approximately two miles from the town of Berwind, West Virginia, 80 miles south of Charleston, West Virginia; 100 miles west of Roanoke, Virginia; 60 miles northeast of Kingsport, Tennessee; and 160 miles east/southeast of Lexington, Kentucky. The Berwind Complex is located in McDowell County, West Virginia, and Buchanan, and Tazewell Counties, Virginia (see Figure 1.1-1).

This TRS was prepared specifically for Ramaco’s Berwind Complex. The reserves and resources at the Berwind Complex have been classified in accordance with SEC mining property disclosure rules under Subpart 1300 and Item 601 (96)(B)(iii) of Regulation S-K. Unless otherwise stated, all volumes, qualities, distances, and currencies are expressed in United States customary units.

The accuracy of reserve and resource estimates are, in part, a function of the quality and quantity of available data at the time this report was prepared. Estimates presented herein are considered reasonable, however, estimates should be accepted with the understanding that with additional data and analysis subsequent to the date of this report, the estimates may necessitate revision which may be material. Certain information set forth in this report contains “forward-looking information”, including production, productivity, operating costs, capital expenditures, coal sales prices, and other assumptions. These statements are not guarantees of future performance and undue reliance should not be placed on these statements. The assumptions used to develop the forward-looking information and the risks that could cause the actual results to differ materially are detailed in the body of this report.

For the Berwind Complex, this TRS reports both mineral reserves and resources (exclusive of reserves). Supporting the assessment of the economic mineability of reported reserves and prospects of economically feasible extraction of reported resources, this TRS includes summary detail of a Preliminary Feasibility Study conducted relative to the Berwind Complex.

Technical Report Summary Berwind Complex Prepared for Ramaco Resources, Inc.

WEIR’s evaluation of coal reserves and resources was conducted in accordance with Regulation S-K 1300 definitions for Mineral Resource, Mineral Reserve and Preliminary Feasibility Study as follows:

The primary information used in this study was obtained from the following sources:

Technical Report Summary Berwind Complex Prepared for Ramaco Resources, Inc.

A detailed list of all data received and reviewed for this study is provided in Sections 24.0 and 25.0 of this TRS.

Technical Report Summary Berwind Complex Prepared for Ramaco Resources, Inc.

WEIR personnel visited the Berwind Complex on November 30, 2021 and January 27, 2023. While on-site, WEIR personnel conducted interviews with company and mine management relative to the following key topics:

Key areas inspected by WEIR personnel at the Berwind Complex included the following:

Based on WEIR’s inspections of the Berwind Complex, the mines, preparation plant and associated infrastructure facilities, and equipment are well maintained and operated with regard for all state and federal rules and regulations related to mine safety and health standards.

This TRS is an update to the Berwind Complex TRS dated November 22, 2022. Approximately 30,000 acres of fee coal property was added to the Berwind Complex through purchase of the Coronado Global Resource Amonate Property. This purchase was completed in December 2021. The purchase also included a coal handling and preparation plant. Ramaco’s mines within the Berwind Complex will no longer utilize the Knox Creek Preparation Plant. Further, coal produced from within the Big Creek Property will continue to be processed at the Knox Creek Preparation Plant, references to references to the Big Creek Property were removed from this revised TRS and are included in a new TRS for Ramaco’s Knox Creek Complex. The changes noted above were determined by Ramaco to warrant the preparation of this updated TRS.

Technical Report Summary Berwind Complex Prepared for Ramaco Resources, Inc.

The town of Berwind, West Virginia is located approximately two miles northeast of the central area of the Berwind Complex. The Berwind Complex is generally located approximately 80 miles south of Charleston, West Virginia; 100 miles west of Roanoke, Virginia; 60 miles northeast of Kingsport, Tennessee; and 160 miles east/southeast of Lexington, Kentucky at 37.22 degrees North Latitude and 81.67 degrees West Longitude on the WGS 84 reference coordinate system. The comprised properties are fairly remote containing scattered rural residences and some small towns.

The Berwind Complex is within the Southern West Virginia and Southwest Virginia Coal Fields of the CAPP Region of the United States (see Figure 1.1-1). The USGS 7.5-minute quadrangle map sheets are Jewell Ridge, Richlands, War, Amonate, Pounding Mill, Gary, Tazewell North, and Tiptop.

The Berwind Property consists of approximately 62,500 acres of leased coal holdings located in McDowell County, West Virginia and Buchanan and Tazewell Counties, Virginia. Ramaco obtained the initial lease for this property in 2015 and commenced mine operations in 2017.

The Berwind Property’s surface facilities are located within the Berwind Property’s permit area, near the central area of the southern boundary of the permit. The surface facilities include a mine office, bath house, and parking lot near the Berwind No. 1 Pocahontas 3 Deep Mine. The Berwind coal handling and preparation plant facility is adjacent to and east of the surface facilities.

Currently, there are three active mines on the Berwind property:

In addition to the active mines, the Berwind No. 1 Pocahontas 4 Deep Mine is idle, within plans to be reactivated in April 2023.

Technical Report Summary Berwind Complex Prepared for Ramaco Resources, Inc.

Ramaco started operations at the Berwind No. 1 Pocahontas 4 Deep Mine in 2017 and idled the mine in mid-July 2022 due to an ignition. An investigation by MSHA suggests the ignition was caused by lightning that struck a pilot hole for a new shaft. The final MSHA report on this incident has not yet been released. Ramaco currently has control of the mine, however, some regulatory steps remain before operations can be re-started.

The Triad Pocahontas 4 Deep Mine commenced operation in 2021 and depleted its reserves in 2022. There is an additional permitted mine, Squire Jim No. 1 Deep Mine, which does not yet have a scheduled startup date.

Amonate Property

In December 2021, Ramaco completed the acquisition of the Amonate Property located adjacent to its existing Berwind Property. The acquisition of this Amonate Property from Coronado Global Resources involved approximately 30,250 acres and includes approximately 401 million tons of low and mid volatile in-place resources, several permitted mining operations, and a preparation plant. The reserves within the Amonate Property acquisition are included in this TRS and are now part of the Berwind Complex.

Ramaco supplied copies of deeds and lease agreements, and property control maps to WEIR related to properties for which mineral and/or surface property are controlled by Ramaco. WEIR reviewed this information and found no property boundary disputes or other concerns that would signal concern over future mining operations or development potential.

Ramaco’s Berwind Complex coal holdings over the 62,500 acres consist of both leases and fee simple coal properties. Approximately 52 percent of the holdings are leased from the Berwind Land Company (BLC), with the original lease executed in August 2015. Fee simple coal makes up the remaining 48 percent of coal holdings. Approximately 844 acres (1.4 percent) within the Berwind Complex are uncontrolled mineral properties.

Within the Berwind Complex, leases typically apply to specific seams, or a vertical range of seams. Therefore, the seams controlled often vary from lease to lease for specific areas across the complex. Table 3.3-1 below shows the various property control contracts.

Technical Report Summary Berwind Complex Prepared for Ramaco Resources, Inc.

The Original Berwind Property mineral control is detailed in Table 3.4-1 below and has not changed from the previous TRS:

⁽¹⁾ Expiration dates on leases can be extended

For mineral control detail on the Amonate Property, refer to Figure 3.4-1 below. It should be noted that the Amonate Property Squire Jim Seam Lease, shown on Figure 3.4-1 is in addition to the coal leases described above in Table 3.4-1.

Technical Report Summary Berwind Complex Prepared for Ramaco Resources, Inc.

Figure 3.4-1 Coal Control Map

Technical Report Summary Berwind Complex Prepared for Ramaco Resources, Inc.

WEIR has not discovered any significant encumbrances for any of the tracts within the Berwind Complex.

A list of Ramaco’s permits for the Berwind Complex and permit status is shown in Table 3.5-1, with a more detailed description of the permits discussed in Section 17.3.

Given Ramaco’s controlled interests at the Berwind Complex, which relate in part to property that is held by others and leased to Ramaco, WEIR assesses that there are no significant issues affecting access to the coal interests, or Ramaco’s ability to execute its mine plans.

Technical Report Summary Berwind Complex Prepared for Ramaco Resources, Inc.

WEIR did not conduct an independent verification of property control, nor has it independently surveyed the mining locations. WEIR has relied on information compiled from maps and summaries of the owned and leased properties prepared by Ramaco. WEIR did not conduct a legal title investigation relative to Ramaco’s mineral and surface rights. Historically, property control has not posed any challenges related to Ramaco’s operations.

Within the Berwind Complex, Ramaco holds no material royalty or similar interest in property which is owned or operated by another party.