RISK FACTORS

Investment in our Common Stock involves a high degree of risk. You should carefully consider the following risk factors before making an investment decision. If any of the following risks and uncertainties actually occurs, our business, financial condition, and results of operations could be negatively impacted and you could lose all or part of your investment.

Risks Related to our Business

There is substantial doubt about our ability to continue as a going concern.

We are a development stage company with no commercial products. Our primary product candidate is in the process of being developed, and will require significant additional clinical development and investment before it could potentially be commercialized. As a result, we have not generated any revenue from operations since inception, and we have incurred substantial net losses to date. Moreover, our cash position is vastly inadequate to support our business plans and substantial additional funding will be needed in order to pursue those plans, which include research and development of our primary product candidate, seeking regulatory approval for that product candidate, and pursuing its commercialization in the U.S., Europe and other markets. Those circumstances raise substantial doubt about our ability to continue as a going concern. In particular and as discussed in greater detail below under the risk factor entitled “ We will need substantial additional funding and may be unable to raise capital when needed, which would force us to delay, reduce or eliminate our product development programs or commercialization efforts and could cause our business to fail ,” we believe that our current cash and cash equivalents on hand will only be sufficient to meet our anticipated cash requirements through May 2016.

We have incurred significant losses since inception. We expect to continue to incur losses for the foreseeable future, and we may never generate revenue or achieve or maintain profitability.

As noted above under the risk factor entitled “ There is substantial doubt about our ability to continue as a going concern , ” w e are a development stage company with no commercial products. Consequently, we have incurred losses in each year since our inception and we expect that losses will continue to be incurred in the foreseeable future in the operation of our business. To date, we have financed our operations entirely through equity and debt investments by founders, other investors and third parties, and we expect to continue to rely on these sources of funding, to the extent available in the foreseeable future. Losses from operations have resulted principally from costs incurred in research and development programs and from general and administrative expenses, including significant costs associated with establishing and maintaining intellectual property rights, significant legal and accounting costs incurred in connection with both the closing of the Merger and complying with public company reporting and control obligations, and personnel expenses. We have devoted substantially all of our time, money and efforts to date to the advancement of our technology and raising capital to support our business, and expect to continue to devote significant time, money and efforts to such activities going forward.

We expect to continue to incur significant expenses and we anticipate that those expenses and losses may increase in the foreseeable future as we seek to:

To become and remain profitable, we must succeed in developing and eventually commercializing product candidates with significant market potential. This will require us to be successful in a number of challenging activities, including successfully completing preclinical testing and clinical trials of product candidates, obtaining regulatory approval for our product candidates and manufacturing, marketing and selling any products for which we may obtain regulatory approval. We are only in the preliminary stages of many of those activities. We may never succeed in those activities and may never generate operating revenues or achieve profitability. Even if we do generate operating revenues sufficient to achieve profitability, we may not be able to sustain or increase profitability. Our failure to generate operating revenues or become and remain profitable would impair our ability to raise capital, expand our business or continue our operations, all of which would depress the price of our Common Stock. A further decline or lack of increase in the prices of our Common Stock could cause our stockholders to lose all or a part of their investment in the Company.

We will need substantial additional funding and may be unable to raise capital when needed, which would force us to delay, reduce or eliminate our product development programs or commercialization efforts and could cause our business to fail.

Based on our current operating expenses and working capital requirements, we believe that our current cash and cash equivalents on hand will only be sufficient to meet our anticipated cash requirements through May 2016. In addition to the funds raised from our previous equity and convertible debt financings and borrowings under the Life Sciences Accelerator Funding Agreement (the “ MLSC Loan Agreement ”) that we entered into with MLSC, we will need to obtain additional financing on or prior to May 2016 to continue operations and fund our planned future operations, including the continuation of our ongoing research and development efforts, the licensing or acquisition of new assets, and researching and developing any potential patents, the related compounds and any further intellectual property that we may acquire. In addition, our plans may change and/or we may use our capital resources more rapidly than we currently anticipate. We presently expect that our expenses will increase in connection with our ongoing activities, particularly as we commence preclinical and clinical development for our lead product candidate, AC5. In particular, we currently estimate that we will require up to $10,000,000 to $14,000,000 and potentially more in additional capital to obtain regulatory approval of AC5 in the U.S. and Europe. Our future capital requirements will depend on many factors, including:

We intend to obtain additional financing for our business through public or private securities offerings, the incurrence of additional indebtedness, or some combination of those sources. We have sought funding through collaborative arrangements, such as the Project Agreement that we entered into with the National University of Ireland Galway (“ NUIG ”) on May 28, 2015, and we may continue to seek funding through additional collaborative arrangements with strategic partners if we determine them to be necessary or appropriate, although these arrangements could require us to relinquish rights to our technology or product candidates and could result in our receipt of only a portion of any revenues associated with the partnered product. We cannot provide any assurance that additional financing from these sources will be available on favorable terms, if at all. In addition, we are bound by certain contractual terms and obligations that may limit or otherwise impact our ability to raise additional funding in the near-term, including restrictions in the MLSC Loan Agreement on our ability to incur certain types of additional indebtedness. These restrictions and provisions could make it more challenging for us to raise capital through the incurrence of additional debt or through future equity issuances. Further, if we do raise capital through the sale of equity, or securities convertible into equity, the ownership of our then existing stockholders would be diluted, which dilution could be significant depending on the price at which we may be able to sell our securities. Also, if we raise additional capital through the incurrence of indebtedness, we may become subject to additional covenants restricting our business activities, and the holders of debt instruments may have rights and privileges senior to those of our equity investors. Finally, servicing the interest and principal repayment obligations under our debt facilities and the Convertible Notes that we issued in the Notes Offering could divert funds that would otherwise be available to support research and development, clinical or commercialization activities.

If we are unable to obtain adequate financing on a timely basis or on acceptable terms in the future, we would likely be required to delay, reduce or eliminate one or more of our product development activities, which could cause our business to fail.

Our current and any future debt facilities or instruments may require us to use our limited capital to repay amounts owed and may impose limitations on our operations, which could negatively affect our business plans.

On the Closing of the Notes Offering on March 13, 2015, we issued to each Convertible Notes Investor a Convertible Note in the principal amount of $250,000. Unless converted on or prior to March 13, 2016 into shares of our Common Stock, we will be obligated to repay the $750,000 in principal borrowed under and up to an aggregate of $60,000 in interest incurred in connection with the Convertible Notes on that date, which we may not have or be able to obtain; provided, however , that in the event that the repayment of the indebtedness accrued under the Convertible Notes is not permitted under the Subordination Agreements, (1) the term of the Convertible Notes and the holders’ rights to convert such Convertible Notes into shares of Common Stock will automatically be extended until repayment is permitted under the Subordination Agreements; and (2) interest will continue to accrue at a rate equal to eight percent (8.0%) (computed on the basis of the actual number of days elapsed in a 360-day year) per annum.

On September 30, 2013, we entered into the MLSC Loan Agreement with MLSC pursuant to which MLSC has provided us an unsecured subordinated loan in principal amount of $1,000,000 (such loan, the “ MLSC Loan ”). The MLSC Loan bears interest at a rate of 10% per annum, and will become fully due and payable on the earlier of (i) September 30, 2018; (ii) the occurrence of an event of default under the MLSC Loan Agreement; or (iii) the completion of a sale of substantially all of our assets, a change-of-control transaction or one or more financing transactions in which we receive from third parties other than our then existing shareholders net proceeds of $5,000,000 or more in a 12-month period. We will need substantial amounts of cash in order to repay the principal and interest owed under MLSC Loan, as it becomes due, which we may not have or be able to obtain. Any failure to make payments as required under the MLSC Loan Agreement would constitute an event of default, and could result in, among other things, MLSC’s acceleration of all amounts due thereunder.

Further, the MLSC Loan Agreement restricts our use of the proceeds of the MLSC Loan to funding working capital requirements and/or the purchase of capital assets in the life sciences field, and we are expressly prohibited from using any such proceeds for any severance payment, investment in certain securities or payment for goods or services to a related party of the Company. Additionally, the MLSC Loan Agreement provides that, for so long as any of the MLSC Loan remains outstanding, our headquarters and at least a majority of our employees must be located in Massachusetts and we must not take certain actions without obtaining MLSC’s prior consent, including without limitation paying dividends on our capital stock, redeeming any of our outstanding securities, and completing a sale of substantially all of our assets or a change-of-control transaction. Further, our failure to remain a “certified life sciences company” under the Massachusetts General Law would constitute an event of default under the MLSC Loan Agreement. Our ability to pursue our business plans during the term of the MLSC Loan may be severely limited as a result of those restrictions, which could cause our operations and financial condition to suffer.

In addition, the MLSC Loan Agreement restricts our ability, without the prior written consent of MLSC, to incur certain types and amounts of additional indebtedness, including indebtedness senior or, in certain circumstances, equal to the MLSC Loan and any indebtedness to any of our stockholders or employees that is subject to a security interest and not expressly subordinated to the MLSC Loan. Our ability to finance our operations could be limited if, while the MLSC Loan is outstanding, the only source of capital available to us is prohibited by the restrictions set forth in the MLSC Loan Agreement, in which case we may be forced to curtail or eliminate some or all of our operations.

Our short operating history may hinder our ability to successfully meet our objectives.

We are a development stage company subject to the risks, uncertainties and difficulties frequently encountered by early-stage companies in evolving markets. Our operations to date have been primarily limited to organizing and staffing, developing and securing our technology and undertaking or funding preclinical studies of our lead product candidate. We have not demonstrated our ability to successfully complete large-scale, pivotal clinical trials, obtain regulatory approvals, manufacture a commercial scale product or arrange for a third party to do so on our behalf, or conduct sales and marketing activities necessary for successful product commercialization.

Because of our limited operating history, we have limited insight into trends that may emerge and affect our business, and errors may be made in developing an approach to address those trends and the other challenges faced by development stage companies. Failure to adequately respond to such trends and challenges could cause our business, results of operations and financial condition to suffer or fail. Further, our limited operating history may make it difficult for our stockholders to make any predictions about our likelihood of future success or viability.

If we are not able to attract and retain qualified management and scientific personnel, we may fail to develop our technologies and product candidates.

Our future success depends to a significant degree on the skills, experience and efforts of the principal members of our scientific and management personnel. These members include Terrence Norchi, MD, our President and Chief Executive Officer. The loss of Dr. Norchi or any of our other key personnel could harm our business and might significantly delay or prevent the achievement of research, development or business objectives. Further, our operation as a public company will require that we attract additional personnel to support the establishment of appropriate financial reporting and internal controls systems. Competition for personnel is intense. We may not be able to attract, retain and/or successfully integrate qualified scientific, financial and other management personnel, which could materially harm our business.

If we fail to properly manage any growth we may experience, our business could be adversely affected.

We anticipate increasing the scale of our operations as we seek to develop our product candidates, including hiring and training additional personnel and establishing appropriate systems for a company with larger operations. The management of any growth we may experience will depend, among other things, upon our ability to develop and improve our operational, financial and management controls, reporting systems and procedures. If we are unable to manage any growth effectively, our operations and financial condition could be adversely affected.

We have identified material weaknesses in our internal control over financial reporting, which could, if not remediated, result in material misstatements in our financial results.

Our management is responsible for establishing and maintaining adequate internal control over our financial reporting, as defined in Rules 13a-15(f) and 15d-15(f) under the Securities Exchange Act of 1934, as amended (the “ Exchange Act ”). As disclosed in Item 9A of Part II of our Annual Report filed December 12, 2014 and in Item 4 of Part I of our Quarterly Reports on Form 10-Q that we filed on February 9, 2015, May 7, 2015 and August 7, 2015, management has identified material weaknesses in our disclosure controls and procedures and our internal control over financial reporting as of September 30, 2014. A material weakness in internal control over financial reporting is defined as a deficiency, or combination of deficiencies, in internal control over financial reporting, such that there is a reasonable possibility that a material misstatement of our consolidated financial statements will not be prevented or detected on a timely basis. As a result of these material weaknesses, our management concluded in our latest annual assessment that our internal control over financial reporting was not effective as of September 30, 2014, based on criteria set forth by the Committee of Sponsoring Organizations of the Treadway Commission in Internal Control—Integrated Framework.

During the quarter ended September 30, 2014, we took steps to remediate certain material weaknesses we have identified in our internal control over financial reporting. On July 7, 2014, we hired a new Chief Financial Officer who serves on a full-time basis. He has, working with the CEO and the Board of Directors, implemented increased segregation of responsibilities, improved policies and procedures relating to purchases of materials and supplies, and developed increased checks and balances as they relate to financial reporting and control policies and procedures. If our remedial measures are insufficient to address the material weaknesses we have identified, or if additional material weaknesses or significant deficiencies in our internal control are discovered or occur in the future, there may be an increased likelihood that our consolidated financial statements contain material misstatements. A restatement of our financial results could result in substantial costs to us for accounting and legal fees and could lead to litigation against us. In addition, even if we are successful in strengthening our controls and procedures, those controls and procedures may not be adequate to prevent or identify irregularities or errors or to facilitate the fair presentation of our consolidated financial statements. If we fail to achieve and maintain the adequacy of our internal controls in accordance with applicable standards, we would be unable to conclude that we have effective internal controls over financial reporting. If we cannot produce reliable financial reports, our business and financial condition could be harmed, investors could lose confidence in our reported financial information, and the market price of our stock could decline significantly. Moreover, our reputation with lenders, investors, securities analysts and others may be adversely affected.

  We rely significantly on information technology and any failure, inadequacy, interruption or security lapse of that technology, including any cybersecurity incidents, could harm our ability to operate our business effectively.

We maintain sensitive data pertaining to our Company on our computer networks, including information about our research and development activities, our intellectual property and other proprietary business information. Our internal computer systems and those of third parties with which we contract may be vulnerable to damage from cyber-attacks, computer viruses, unauthorized access, natural disasters, terrorism, war and telecommunication and electrical failures, despite the implementation of security measures. System failures, accidents or security breaches could cause interruptions to our operations, including material disruption of our research and development activities, result in significant data losses or theft of our intellectual property or proprietary business information, and could require substantial expenditures to remedy. To the extent that any disruption or security breach were to result in a loss of, or damage to, our data or applications or inappropriate disclosure of confidential or proprietary information, we could incur liability and our research and development programs could be delayed, any of which would harm our business and operations.

Risks Related to the Development and Commercialization of our Product Candidates

Our current business plan is dependent on the success of one product candidate.

Our business is currently focused almost entirely on the development and commercialization of one product candidate, AC5. Our reliance on one primary product candidate means that, if we are not able to obtain regulatory approvals and market acceptance of that product, our chances for success will be significantly reduced. We are also less likely to withstand competitive pressures if any of our competitors develops and obtains regulatory approval or certification for a similar product faster than we can or that is otherwise more attractive to the market than AC5. Our current dependence on one product candidate increases the risk that our business will fail if our development efforts for that product candidate experience delays or other obstacles or are otherwise not successful.

The Chemistry, Manufacturing and Control (“CMC”) process may be challenging.

Because of the complexity of our lead product candidate, the CMC process, including product scale-up activities, may be difficult to complete successfully within the parameters required by the FDA or its foreign counterparts. Peptide formulation optimization is particularly challenging, and any delays could negatively impact our anticipated clinical trial and subsequent commercialization timeline. Furthermore, we have, and the third parties with whom we may establish relationships may also have, limited experience with attempting to commercialize a self-assembling peptide as a medical device, which increases the risks associated with completing the CMC process successfully, on time, or within the projected budget. Failure to complete the CMC process successfully would impact our ability to start a clinical trial and could severely limit the long-term viability of our business.

Our principal product candidate is inherently risky because it is based on novel technologies.

We are subject to the risks of failure inherent in the development of products based on new technologies. The novel nature of AC5 creates significant challenges with respect to product development and optimization, engineering, manufacturing, scale-up, quality systems, pre-clinical  in vitro  and  in vivo  testing, government regulation and approval, third-party reimbursement and market acceptance. Our failure to overcome any one of those challenges could harm our operations, ability to commence and/or complete a clinical trial, and overall chances for success.

The manufacturing, production, and sterilization methods that we intend to be utilized are detailed and complex and are a difficult process to manage.

We intend to utilize third party manufacturers to manufacture and sterilize our products. We believe that our proposed manufacturing methods make our choice of manufacturer and sterilizer critical, as they must possess sufficient expertise in synthetic organic chemistry and device manufacturing. If such manufacturers are unable to properly manufacture to product specifications or sterilize our products adequately, that could severely limit our ability to market our products.

Compliance with governmental regulations regarding the treatment of animals used in research could increase our operating costs, which would adversely affect the commercialization of our technology.

The Animal Welfare Act (“ AWA ”) is the federal law that covers the treatment of certain animals used in research. Currently, the AWA imposes a wide variety of specific regulations that govern the humane handling, care, treatment and transportation of certain animals by producers and users of research animals, most notably relating to personnel, facilities, sanitation, cage size, and feeding, watering and shipping conditions. Third parties with whom we contract are subject to registration, inspections and reporting requirements under the AWA. Furthermore, some states have their own regulations, including general anti-cruelty legislation, which establish certain standards in handling animals. Comparable rules, regulations, and or obligations exist in many foreign jurisdictions. If our contractors or we fail to comply with regulations concerning the treatment of animals used in research, we may be subject to fines and penalties and adverse publicity, and our operations could be adversely affected.

If the FDA or similar foreign agencies or intermediaries impose requirements or an alternative product classification more onerous than we anticipate, our business could be adversely affected.

The development plan for our lead product candidate is based on our anticipation of pursuing the medical device regulatory pathway, and in February 2015 we received confirmation from The British Standards Institution (“ BSI ”), a Notified Body (which is a private commercial entity designated by the national government of an European Union (“ EU ”) member state as being competent to make independent judgments about whether a medical device complies with applicable regulatory requirements) in the EU, that AC5 fulfills the definition of a medical device within the EU and will be classified as such in consideration for CE mark designation. However, the FDA and other applicable foreign agencies, including European Competent Authorities, will have authority to finally determine the regulatory route for our product candidates in their jurisdictions. If the FDA or similar foreign agencies or intermediaries deem our product to be a member of a category other than a medical device, such as a drug or biologic, or impose additional requirements on our pre-clinical and clinical development than we presently anticipate, financing needs would increase, the timeline for product approval would lengthen, the program complexity and resource requirements world increase, and the probability of successfully commercializing a product would decrease. Any or all of those circumstances would materially adversely affect our business.

If we are not able to secure and maintain relationships with third parties that are capable of conducting clinical trials on our product candidates and support our regulatory submissions, our product development efforts, and subsequent regulatory approvals could be adversely impacted.

Our management has limited experience in conducting preclinical development activities and clinical trials. As a result, we have relied and will need to continue to rely on third party research institutions, organizations and clinical investigators to conduct our preclinical and clinical trials and support our regulatory submissions. If we are unable to reach agreement with qualified research institutions, organizations and clinical investigators on acceptable terms, or if any resulting agreement is terminated prior to the completion of our clinical trials, then our product development efforts could be materially delayed or otherwise harmed. Further, our reliance on third parties to conduct our clinical trials and support our regulatory submissions will provide us with less control over the timing and cost of those trials, the ability to recruit suitable subjects to participate in the trials, and the timing, cost, and probability of success for the regulatory submissions. Moreover, the FDA and other regulatory authorities require that we comply with standards, commonly referred to as good clinical practices (“ GCP ”), for conducting, recording and reporting the results of our preclinical development activities and our clinical trials, to assure that data and reported results are credible and accurate and that the rights, safety and confidentiality of trial participants are protected. Additionally, both we and any third party contractor performing preclinical and clinical studies are subject to regulations governing the treatment of human and animal subjects in performing those studies. Our reliance on third parties that we do not control does not relieve us of those responsibilities and requirements. If those third parties do not successfully carry out their contractual duties, meet expected deadlines or conduct our preclinical development activities or clinical trials in accordance with regulatory requirements or stated protocols, we may not be able to obtain, or may be delayed in obtaining, regulatory approvals for our product candidates and will not be able to, or may be delayed in our efforts to, successfully commercialize our product candidates. Any of those circumstances would materially harm our business and prospects.

Any clinical trials that are planned or are conducted on our product candidates may not start or may fail.

Clinical trials are lengthy, complex and extremely expensive processes with uncertain expenditures and results and frequent failures. While we believe that the first clinical trial for AC5 will be initiated during the fourth quarter of calendar year 2015, clinical trials that are planned or which commence for any of our product candidates could be delayed, limited or fail for a number of reasons, including if:

Any delay or failure of one or more of our clinical trials may occur at any stage of testing. Any such delay could cause our development costs to materially increase, and any such failure could significantly impair our business plans, which would materially harm our financial condition and operations.

We cannot market and sell any product candidate in the U.S. or in any other country or region if we fail to obtain the necessary regulatory approvals or certifications from applicable government agencies.

We cannot sell our product candidates in any country until regulatory agencies grant marketing approval or other required certifications. The process of obtaining such approval is lengthy, expensive and uncertain. If we are able to obtain such approvals for our lead product candidate or any other product candidate we may pursue, which we may never be able to do, it would likely be a process that takes many years to achieve.

To obtain marketing approvals in the U.S. for our product candidates, we believe that we must, among other requirements, complete carefully controlled and well-designed clinical trials sufficient to demonstrate to the FDA that the product candidate is safe and effective for each indication for which we seek approval. As described above, many factors could cause those trials to be delayed or to fail.

We believe that the pathway to marketing approval in the U.S. for our lead product candidate will likely require the process of FDA Premarket Approval (“ PMA ”) for the product, which is based on novel technologies and likely will be classified as a Class III medical device. This approval pathway can be lengthy and expensive, and is estimated to take from one to three years or longer from the time the PMA application is submitted to the FDA until approval is obtained, if approval can be obtained at all.

Similarly, to obtain approval to market our product candidates outside of the U.S., we will need to submit clinical data concerning our product candidates to and receive marketing approval or other required certifications from governmental or other agencies in those countries, which in certain countries includes approval of the price we intend to charge for a product. For instance, in order to obtain the certification needed to market our lead product candidate in the EU, we believe that we will need to obtain a CE mark for the product, which entails scrutiny by applicable regulatory agencies and bears some similarity to the PMA process, including completion of one or more successful clinical trials.

We may encounter delays or rejections if changes occur in regulatory agency policies, if difficulties arise within regulatory or related agencies such as, for instance, any delays in their review time, or if reports from preclinical and clinical testing on similar technology or products raise safety and/or efficacy concerns during the period in which we develop a product candidate or during the period required for review of any application for marketing approval or certification.

Any difficulties we encounter during the approval or certification process for any of our product candidates would have a substantial adverse impact on our operations and financial condition and could cause our business to fail.

We cannot guarantee that we will be able to effectively market our product candidates.

A significant part of our success depends on the various marketing strategies we plan to implement. Our business model has historically focused solely on product development, and we have never attempted to commercialize any product. There can be no assurance as to the success of any such marketing strategy that we develop or that we will be able to build a successful sales and marketing organization. If we cannot effectively market those products we seek to commercialize directly, such products’ prospects will be harmed.

Any product for which we obtain required regulatory approvals could be subject to post-approval regulation, and we may be subject to penalties if we fail to comply with such post-approval requirements.

Any product for which we are able to obtain marketing approval or other required certifications, and for which we are able to obtain approval of the manufacturing processes, post-approval clinical data, labeling, advertising and promotional activities for such product, will be subject to continual requirements of and review by the FDA and comparable foreign regulatory authorities, including through periodic inspections. These requirements include, without limitation, submissions of safety and other post-marketing information and reports, registration requirements, cGMP requirements relating to quality control, quality assurance and corresponding maintenance of records and documents. Maintaining compliance with any such regulations that may be applicable to us or our product candidates in the future would require significant time, attention and expense. Even if marketing approval of a product is granted, the approval may be subject to limitations on the indicated uses for which the product may be marketed or other conditions of approval, or may contain requirements for costly and time consuming post-marketing approval testing and surveillance to monitor the safety or efficacy of the product. Discovery after approval of previously unknown problems with any approved product candidate or related manufacturing processes, or failure to comply with regulatory requirements, may result in consequences to us such as:

If any of our product candidates achieves required regulatory marketing approvals or certifications in the future, the subsequent occurrence of any such post-approval consequences would materially adversely affect our business and operations.

Current or future legislation may make it more difficult and costly for us to obtain marketing approval or other certifications of our product candidates.

In 2007, the Food and Drug Administration Amendments Act of 2007 (the “ FDAAA ”) was adopted. This legislation grants significant powers to the FDA, many of which are aimed at assuring the safety of medical products after approval. For example, the FDAAA grants the FDA authority to impose post-approval clinical study requirements, require safety-related changes to product labeling and require the adoption of complex risk management plans. Pursuant to the FDAAA, the FDA may require that a new product be used only by physicians with specialized training, only in specified health care settings, or only in conjunction with special patient testing and monitoring. The legislation also includes requirements for disclosing clinical study results to the public through a clinical study registry, and renewed requirements for conducting clinical studies to generate information on the use of products in pediatric patients. Under the FDAAA, companies that violate these laws are subject to substantial civil monetary penalties. The requirements and changes imposed by the FDAAA, or any other new legislation, regulations or policies that grant the FDA or other regulatory agencies additional authority that further complicates the process for obtaining marketing approval and/or further restricts or regulates post-marketing approval activities, could make it more difficult and more costly for us to obtain and maintain approval of any of our product candidates.

Public perception of ethical and social issues may limit or discourage the type of research we conduct.

Our clinical trials will involve human subjects, and third parties with whom we contract also conduct research involving animal subjects. Governmental authorities could, for public health or other purposes, limit the use of human or animal research or prohibit the practice of our technology. Further, ethical and other concerns about our or our third party contractors’ methods, particularly the use of human subjects in clinical trials or the use of animal testing, could delay our research and preclinical and clinical trials, which would adversely affect our business and financial condition.

Use of third parties to manufacture our product candidates may increase the risk that preclinical development, clinical development and potential commercialization of our product candidates could be delayed, prevented or impaired.

We have limited personnel with experience in medical device development and manufacturing, do not own or operate manufacturing facilities, and generally lack the resources and the capabilities to manufacture any of our product candidates on a clinical or commercial scale. We currently intend to outsource all or most of the clinical and commercial manufacturing and packaging of our product candidates to third parties. However, we have not established long-term agreements with any third party manufacturers for the supply of any of our product candidates. There are a limited number of manufacturers that operate under cGMP regulations and that are capable of and willing to manufacture our lead product candidate utilizing the manufacturing methods that are required to produce that product candidate, and our product candidates will compete with other product candidates for access to qualified manufacturing facilities. If we have difficulty locating third party manufacturers to develop our product candidates for preclinical and clinical work, then our product development programs will experience delays and otherwise suffer. We may also be unable to enter into agreements for the commercial supply of products with third party manufacturers in the future, or may be unable to do so when needed or on acceptable terms. Any such events could materially harm our business.

Reliance on third party manufacturers entails risks to our business, including without limitation:

The failure of any of our contract manufacturers to maintain high manufacturing standards could result in harm to clinical trial participants or patients using the products. Such failure could also result in product liability claims, product recalls, product seizures or withdrawals, delays or failures in testing or delivery, cost overruns or other problems that could seriously harm our business or profitability. Further, our contract manufacturers will be required to adhere to FDA and other applicable regulations relating to manufacturing practices. Those regulations cover all aspects of the manufacturing, testing, quality control and recordkeeping relating to our product candidates and any products that we may commercialize in the future. The failure of our third party manufacturers to comply with applicable regulations could result in sanctions being imposed on us, including fines, injunctions, civil penalties, failure of regulatory authorities to grant marketing approval or other required certifications of our product candidates, delays, suspension or withdrawal of approvals, license revocation, seizures or recalls of product candidates, operating restrictions and criminal prosecutions, any of which could significantly and adversely affect our business, financial condition and operations.

Materials necessary to manufacture our product candidates may not be available on commercially reasonable terms, or at all, which may delay or otherwise hinder the development and commercialization of those product candidates.

We will rely on the manufacturers of our product candidates to purchase from third party suppliers the materials necessary to produce the compounds for preclinical and clinical studies, and may continue to rely on those suppliers for commercial distribution if we obtain marketing approval or other required certifications for any of our product candidates. The materials to produce our products may not be available when needed or on commercially reasonable terms, and the prices for such materials may be susceptible to fluctuations. We do not have any control over the process or timing of the acquisition of these materials by our manufacturers. Moreover, we currently do not have any agreements relating to the commercial production of any of these materials. If these materials cannot be obtained for our preclinical and clinical studies, product testing and potential regulatory approval of our product candidates would be delayed, which would significantly impact our ability to develop our product candidates and materially adversely affect our ability to meet our objectives and obtain operations success.

We may not be successful in maintaining or establishing collaborations, which could adversely affect our ability to develop and, if required regulatory approvals are obtained, commercialize our product candidates.

As demonstrated by the Project Agreement that we entered into with NUIG on May 28, 2015, we intend to collaborate with physicians, patient advocacy groups, foundations, government agencies, and/or other third parties to assist with the development of our product candidates. If required regulatory approvals are obtained for any of our product candidates, then we may consider entering into additional collaboration arrangements with medical technology, pharmaceutical or biotechnology companies and/or seek to establish strategic relationships with marketing partners for the development, sale, marketing and/or distribution of our products within or outside of the U.S. If we elect to expand our current relationship with NUIG and/or seek additional collaborators in the future but are unable to reach agreements with NUIG and/or such other collaborators, as applicable, then we may fail to meet our business objectives for the affected product or program. Moreover, collaboration arrangements are complex and time consuming to negotiate, document and implement, and we may not be successful in our efforts, if any, to establish and implement additional collaborations or other alternative arrangements. The terms of any collaboration or other arrangements that we establish may not be favorable to us, and the success of any such collaboration will depend heavily on the efforts and activities of our collaborators. Any failure to engage successful collaborators could cause delays in our product development and/or commercialization efforts, which could harm our financial condition and operational results.

We compete with other pharmaceutical and medical device companies, including companies that may develop products that make our product candidates less attractive or obsolete.

The medical device, pharmaceutical and biotechnology industries are highly competitive. If our product candidates become available for commercial sale, we will compete in that competitive marketplace. There are several products on the market or in development that could be competitors with our lead product candidate. Further, most of our competitors have greater resources or capabilities and greater experience in the development, approval and commercialization of medical devices or other products than we do. We may not be able to compete successfully against them. We also compete for funding with other companies in our industry that are focused on discovering and developing novel improvements in surgical bleeding prevention.

We anticipate that competition in our industry will increase. In addition, the healthcare industry is characterized by rapid technological change, resulting in new product introductions and other technological advancements. Our competitors may develop and market products that render our lead product candidate or any future product candidate we may seek to develop non-competitive or otherwise obsolete. Any such circumstances could cause our operations to suffer.

  If we fail to generate market acceptance of our product candidates and establish programs to educate and train surgeons as to the distinctive characteristics of our product candidates, we will not be able to generate revenues on our product candidates.

Acceptance in the marketplace of our lead product candidate depends in part on our and our third party contractors’ ability to establish programs for the training of surgeons in the proper usage of that product candidate, which will require significant expenditure of resources. Convincing surgeons to dedicate the time and energy necessary to properly train to use new products and techniques is challenging, and we may not be successful in those efforts. If surgeons are not properly trained, they may ineffectively use our product candidates. Such misuse could result in unsatisfactory patient outcomes, patient injury, negative publicity or lawsuits against us. Accordingly, even if our product candidates are superior to alternative treatments, our success will depend on our ability to gain and maintain market acceptance for those product candidates among certain select groups of the population and develop programs to effectively train them to use those products. If we fail to do so, we will not be able to generate revenue from product sales and our business, financial condition and results of operations will be adversely affected.

We face uncertainty related to pricing, reimbursement and healthcare reform, which could reduce our potential revenues.

If our product candidates are approved for commercialization, any sales will depend in part on the availability of coverage and reimbursement from third-party payers such as government insurance programs, including Medicare and Medicaid, private health insurers, health maintenance organizations and other healthcare related organizations. If our product candidates obtain marketing approval, pricing and reimbursement may be uncertain. Both the federal and state governments in the U.S. and foreign governments continue to propose and pass new legislation affecting coverage and reimbursement policies, which are designed to contain or reduce the cost of healthcare. Further, federal, state and foreign healthcare proposals and reforms could limit the prices that can be charged for the product candidates that we may develop, which may limit our commercial opportunity. Adoption of our product candidates by the medical community may be limited if doctors and hospitals do not receive adequate partial or full reimbursement for use of our products, if any are commercialized. In some foreign jurisdictions, marketing approval or allowance could be dependent upon pre-marketing price negotiations. As a result, any denial of private or government payer coverage or inadequate reimbursement for procedures performed using our products, before or upon commercialization, could harm our business and reduce our prospects for generating revenue. 

In addition, the U.S. Congress recently adopted legislation regarding health insurance. As a result of this new legislation, substantial changes could be made to the current system for paying for healthcare in the U.S., including modifications to the existing system of private payers and government programs, such as Medicare, Medicaid and State Children’s Health Insurance Program, creation of a government-sponsored healthcare insurance source, or some combination of those, as well as other changes. Restructuring the coverage of medical care in the U.S. could impact reimbursement for medical devices such as our product candidates. If reimbursement for our approved product candidates, if any, is substantially less than we expect, or rebate obligations associated with them are substantially increased, our business could be materially and adversely impacted.

The use of our product candidates in human subjects may expose us to product liability claims, and we may not be able to obtain adequate insurance or otherwise defend against any such claims.

We face an inherent risk of product liability claims and do not currently have product liability insurance coverage. We will need to obtain insurance coverage if and when we begin clinical trials and commercialization of any of our product candidates. We may not be able to obtain or maintain product liability insurance on acceptable terms with adequate coverage. If claims against us exceed any applicable insurance coverage we may obtain, then our business could be adversely impacted. Regardless of whether we would be ultimately successful in any product liability litigation, such litigation could consume substantial amounts of our financial and managerial resources, which could significantly harm our business.

Risks Related to our Intellectual Property

If we are unable to obtain and maintain protection for our intellectual property rights, the value of our technology and products will be adversely affected.

Our success will depend in large part on our ability to obtain and maintain protection in the U.S. and other countries for the intellectual property rights covering or incorporated into our technology and products. The ability to obtain patents covering technology in the field of medical devices generally is highly uncertain and involves complex legal, technical, scientific and factual questions. We may not be able to obtain and maintain patent protection relating to our technology or products. Even if issued, patents issued or licensed to us may be challenged, narrowed, invalidated, held to be unenforceable or circumvented, or determined not to cover our product candidates or our competitors’ products, which could limit our ability to stop competitors from marketing identical or similar products. One of our licensed MIT European patents has been opposed in an administrative hearing. Further, we cannot be certain that we were the first to make the inventions claimed in the patents we own or license, or that protection of the inventions set forth in those patents was the first to be filed in the U.S. Third parties that have filed patents or patent applications covering similar technologies or processes may challenge our claim of sole right to use the intellectual property covered by the patents we own or exclusively license. Moreover, changes in applicable intellectual property laws or interpretations thereof in the U.S. and other countries may diminish the value of our intellectual property rights or narrow the scope of our patent protection. Any failure to obtain or maintain adequate protection for our intellectual property would materially harm our business, product development programs and prospects.

In addition, our proprietary information, trade secrets and know-how are important components of our intellectual property rights. We seek to protect our proprietary information, trade secrets, know-how and confidential information, in part, with confidentiality agreements with our employees, corporate partners, outside scientific collaborators, sponsored researchers, consultants and other advisors. We also have invention or patent assignment agreements with our employees and certain consultants and advisors. If our employees or consultants breach those agreements, we may not have adequate remedies for any of those breaches. In addition, our proprietary information, trade secrets and know-how may otherwise become known to or be independently developed by others. Enforcing a claim that a party illegally obtained and is using our proprietary information, trade secrets and know-how is difficult, expensive and time consuming, and the outcome is unpredictable. In addition, courts outside the U.S. may be less willing to protect trade secrets. Costly and time consuming litigation could be necessary to seek to enforce and determine the scope of our intellectual property rights, and failure to obtain or maintain protection thereof could adversely affect our competitive business position and results of operations.

We do not have exclusive rights to certain intellectual property as our patent portfolio includes certain patents that are jointly owned with our collaborators and others that have been in-licensed on a non-exclusive basis.

As of December 31, 2014, we jointly owned a small number of U.S. patents, U.S. patent applications and international (PCT) patent applications with certain of our collaborators. The rights of our collaborators to these patents, patent applications and other compounds under the collaborations may in the future restrict our ability to further develop or generate revenues from those compounds except through the collaborations.

Our patent portfolio, which covers self-assembling peptides and methods of use thereof, includes 14 applications, one of which has been allowed and 13 of which are pending in a total of five jurisdictions. We have also entered into a license agreement with MIT pursuant to which we have been granted exclusive rights under one portfolio of patents and non-exclusive rights under another portfolio of patents. The portfolio exclusively licensed from MIT includes seven patents that have been either allowed, issued or granted and 15 applications that are pending in a total of 10 jurisdictions. The portfolio non-exclusively licensed from MIT includes a number of PCT applications which have now entered the national and regional phases outside of the US, including 7 issued patents in three jurisdictions that expire between 2016 and 2027 (absent patent term extension), and three pending patent applications in four jurisdictions. Because a portion of our patent portfolio has been in-licensed on a non-exclusive basis, other parties may be able to develop, manufacture, market and sell products with similar features covered by the same patent rights and technologies, which in turn could significantly undercut the value of any of our product candidates and adversely affect our business prospects.

If we lose certain intellectual property rights owned by third parties and licensed to us, our business could be materially harmed.

We have entered into certain in-license agreements with MIT and with certain other third parties, and may seek to enter into additional in-license agreements relating to other intellectual property rights in the future. To the extent we and our product candidates rely heavily on any such in-licensed intellectual property, we are subject to our and the counterparty’s compliance with the terms of such agreements in order to maintain those rights. Presently, we, our lead product candidate and our business plans are dependent on the patent and other intellectual property rights that are licensed to us under our license agreement with MIT. Although that agreement has a durational term through the life of the licensed patents, it also imposes certain diligence, capital raising, and other obligations on us, our breach of which could permit MIT to terminate the agreement. Further, we are responsible for all patent prosecution and maintenance fees under that agreement, and a failure to pay such fees on a timely basis could also entitle MIT to terminate the agreement. Any failure by us to satisfy our obligations under our license agreement with MIT or any other dispute or other issue relating to that agreement could cause us to lose some or all of our rights to use certain intellectual property that is material to our business and our lead product candidate, which would materially harm our product development efforts and could cause our business to fail.

If we infringe or are alleged to infringe the intellectual property rights of third parties, our business and financial condition could suffer.

Our research, development and commercialization activities, as well as any product candidates or products resulting from those activities, may infringe or be accused of infringing a patent or other intellectual property under which we do not hold a license or other rights. Third parties may own or control those patents or other rights in the U.S. or abroad, and could bring claims against us that would cause us to incur substantial time, expense, and diversion of management attention. If a patent or other intellectual property infringement suit were brought against us, we could be forced to stop or delay research, development, manufacturing or sales, if any, of the applicable product or product candidate that is the subject of the suit. In order to avoid or settle potential claims with respect to any of the patent or other intellectual property rights of third parties, we may choose or be required to seek a license from a third party and be required to pay license fees or royalties or both. Any such license may not be available on acceptable terms, or at all. Even if we or our future collaborators were able to obtain a license, the rights granted to us or them could be non-exclusive, which could result in our competitors gaining access to the same intellectual property rights and materially negatively affecting the commercialization potential of our planned products. Ultimately, we could be prevented from commercializing one or more product candidates, or be forced to cease some aspects of our business operations, if, as a result of actual or threatened infringement claims, we are unable to enter into licenses on acceptable terms or at all or otherwise settle such claims. Further, if any such claims were successful against us, we could be forced to pay substantial damages. Any of those results could significantly harm our business, prospects and operations.

Risks Related to Ownership of our Common Stock

There is not now, and there may not ever be, an active market for our Common Stock, which trades in the over-the-counter market in low volumes and at volatile prices.

There currently is a limited market for our Common Stock. Although our Common Stock is quoted on the OTCQB, an over-the-counter quotation system, trading of our Common Stock is extremely limited and sporadic and generally at very low volumes. Further, the price at which our Common Stock may trade is volatile and we expect that it will continue to fluctuate significantly in response to various factors, many of which are beyond our control. The stock market in general, and securities of small-cap companies driven by novel technologies in particular, has experienced extreme price and volume fluctuations in recent years. Continued market fluctuations could result in further volatility in the price at which our Common Stock may trade, which could cause its value to decline. To the extent we seek to raise capital in the future through the issuance of equity, those efforts could be limited or hindered by low and/or volatile market prices for our Common Stock.

We do not now meet the initial listing standards of the Nasdaq Stock Market or any other national securities exchange. We presently anticipate that our Common Stock will continue to be quoted on the OTCQB or another over-the-counter quotation system. In those venues, our stockholders may find it difficult to obtain accurate quotations as to the market value of their shares of our Common Stock, and may find few buyers to purchase their stock and few market makers to support its price.

A more active market for our Common Stock may never develop. As a result, investors must bear the economic risk of holding their shares of our Common Stock for an indefinite period of time.

Our Common Stock is a “penny stock.”

The SEC has adopted regulations that generally define “penny stock” as an equity security that has a market price of less than $5.00 per share, subject to specific exemptions. The market price of our Common Stock is, and is expected to continue to be in the near term, less than $5.00 per share and is therefore a “penny stock.” Brokers and dealers effecting transactions in “penny stock” must disclose certain information concerning the transaction, obtain a written agreement from the purchaser and determine that the purchaser is reasonably suitable to purchase the securities. Those rules may restrict the ability of brokers or dealers to sell our Common Stock and may affect the ability of our stockholders to sell their shares of our Common Stock. In addition, if our Common Stock continues to be quoted on the OTCQB as we expect, then our stockholders may find it difficult to obtain accurate quotations for our stock, and may find few buyers to purchase our stock and few market makers to support its price.

If we issue additional shares in the future, including issuances of shares upon exercise of the Series D Warrants, the 2014 Warrants or conversion of our Convertible Notes, our existing stockholders will be diluted.

  Our articles of incorporation authorize the issuance of up to 300,000,000 shares of Common Stock. In connection with the 2015 Private Placement Financing that concluded on July 2, 2015, we issued an aggregate of 14,390,754 shares of our Common Stock, which equaled approximately 18% of the 78,766,487 shares of our Common Stock that were issued and outstanding immediately prior to the commencement of the 2015 Private Placement Financing. Upon the closing of the 2015 Private Placement Financing, we also issued Series D Warrants to acquire up to an additional 14,390,754 shares of our Common Stock at an initial exercise price of $0.25 per share.

Similarly, between March 11, 2015 and through March 13, 2015, we entered into substantially similar Convertible Notes Subscription Agreements with each of the Convertible Notes Investors pursuant to which we issued Convertible Notes to the Convertible Notes Investors in the aggregate principal amount of $750,000. The Convertible Notes bear interest on the unpaid principal balance at a rate equal to eight percent (8.0%) (computed on the basis of the actual number of days elapsed in a 360-day year) per annum until either (a) converted into shares of our Common Stock; or (b) the outstanding principal and accrued interest on the Convertible Notes is paid in full by us. At any time prior to March 13, 2016, the holders of the Convertible Notes have the right to convert some or all of such Convertible Notes into the number of shares of our Common Stock determined by dividing (A) the aggregate sum of the (i) principal amount of the Convertible Note to be converted; and (ii) amount of any accrued but unpaid interest with respect to such portion of the Convertible Note to be converted; and (B) the conversion price then in effect, which was $0.20 per share on the date the Notes Offering closed. Interest on the Convertible Notes becomes due and payable upon their conversion or their maturity date, March 13, 2016, and may become due and payable upon the occurrence of an event of default under the Convertible Notes, as defined in the Convertible Notes; provided, however , that in the event that the repayment of the indebtedness accrued under the Convertible Notes is not permitted under the Subordination Agreements, (1) the term of the Convertible Notes and the holders’ rights to convert such Convertible Notes into shares of Common Stock will automatically be extended until repayment is permitted under the Subordination Agreements; and (2) interest will continue to accrue at a rate equal to eight percent (8.0%) (computed on the basis of the actual number of days elapsed in a 360-day year) per annum. Assuming that the remaining principal outstanding under the Convertible Notes as of October 15, 2015 and the interest accrued thereunder is converted into shares of our Common Stock on March 13, 2016, a total of 2,516,766 shares may be issued upon the conversion of the Convertible Notes.

Upon the closing of the 2014 Private Placement Financing on February 4, 2014, we issued an aggregate of 11,400,000 shares of our Common Stock, which equaled approximately 16% of our currently issued and outstanding Common Stock on the date the 2014 Private Placement Financing closed. Upon the closing of the 2014 Private Placement Financing, we also issued three series of Warrants to acquire up to an additional 34,200,000 shares of our Common Stock at initial exercise prices ranging from $0.30 per share (the Series A Warrants), $0.35 per share (the Series B Warrants), and $0.40 per share (the Series C Warrants). On December 1, 2014, the Company entered into that certain Amendment to Series A Warrants, Series B Warrants and Series C Warrants to Purchase Common Stock, dated as of December 1, 2014, with Cranshire pursuant to which, among other things, the exercise prices of the Series B Warrants and Series C Warrants were lowered to $0.20 per share. Following the December 1, 2014 amendment, 4,000,000 shares underlying the Series B Warrants were exercised, and the remaining 7,400,000 expired unexercised on January 3, 2015 when the term of the Series B Warrants expired. As a result of the conversion price of our Convertible Notes, the closing of the Notes Offering and the subsequent issuance of the Convertible Notes triggered the anti-dilution provisions of the Series A Warrants, which in turn reduced the exercise price of the Series A Warrants to $0.20 per share and increased the aggregate number of shares issuable under the Series A Warrants by 5,700,000 shares (or fifty-percent (50%)) from 11,400,000 shares to 17,100,000 shares. As of October 15, 2015, up to 3,400,000 shares may be acquired upon the exercise of the Series C Warrants and up to 9,350,000 shares may be acquired upon the exercise of the Series A Warrants.

Additionally, pursuant to the 2013 Plan, as of October 15, 2015, we were authorized to grant equity awards to our employees, directors and consultants for up to an aggregate of 15,120,708 shares (net of 1,256,250 options already exercised and 300,000 shares of restricted stock awarded) of our Common Stock (and such authorized amount may increase by up to 3 million shares on the first business day of each following fiscal year as set forth in the 2013 Plan), and in addition to the Series D Warrants granted in connection with the 2015 Private Placement Financing, the 2014 Warrants granted in connection with the 2014 Private Placement Financing and the Convertible Notes issued in the Notes Offering, there are currently outstanding warrants to acquire up to 145,985 shares of our Common Stock. Any future grants of options, warrants or other securities exercisable or convertible into our Common Stock, or the exercise or conversion of such shares, and any sales of such shares in the market, could have an adverse effect on the market price of our Common Stock.

In addition to capital raising activities, other possible business and financial uses for our authorized Common Stock include, without limitation, future stock splits, acquiring other companies, businesses or products in exchange for shares of Common Stock, issuing shares of our Common Stock to partners in connection with strategic alliances, attracting and retaining employees by the issuance of additional securities under our various equity compensation plans, compensating consultants by issuing shares or options to purchase shares of our Common Stock, or other transactions and corporate purposes that our Board of Directors deems are in the Company’s best interest. By way of example, on August 6, 2015, we issued an aggregate of 600,000 shares of restricted stock in connection with our entrance into separate consulting agreements with two investor relations firms, Excelsior Global Advisors LLC and Acorn Management Partners, LLC, in each case in consideration of the services to be provided under and in accordance with the terms of each consulting agreement. Additionally, shares of Common Stock could be used for anti-takeover purposes or to delay or prevent changes in control or management of the Company. We cannot provide assurances that any issuances of Common Stock will be consummated on favorable terms or at all, that they will enhance stockholder value, or that they will not adversely affect our business or the trading price of our Common Stock. The issuance of any such shares will reduce the book value per share and may contribute to a reduction in the market price of the outstanding shares of our Common Stock. If we issue any such additional shares, such issuance will reduce the proportionate ownership and voting power of all current shareholders. Further, such issuance may result in a change of control of our corporation.

Future sales of our Common Stock or rights to purchase Common Stock, or the perception that such sales could occur, could cause our stock price to fall.

As noted above under the risk factor entitled, “ We will need substantial additional funding and may be unable to raise capital when needed, which would force us to delay, reduce or eliminate our product development programs or commercialization efforts and could cause our business to fail ,” we will need to obtain additional financing prior to or during May 2016 to continue operations and fund our planned future operations. To raise capital, we may sell Common Stock, convertible securities or other equity securities in one or more transactions at prices and in a manner we determine from time to time. Any such sales of our Common Stock by us or resale of our Common Stock by our existing stockholders could cause the market price of our Common Stock to decline.

FINRA sales practice requirements may limit a stockholder’s ability to buy and sell our stock.

In addition to the “penny stock” rules described above, FINRA has adopted rules that require that, in recommending an investment to a customer, a broker-dealer must have reasonable grounds for believing that the investment is suitable for that customer. Prior to recommending speculative low priced securities to their non-institutional customers, broker-dealers must make reasonable efforts to obtain information about the customer’s financial status, tax status, investment objectives and other information. Under interpretations of these rules, FINRA has indicated its belief that there is a high probability that speculative low priced securities will not be suitable for at least some customers. These FINRA requirements make it more difficult for broker-dealers to recommend that at least some of their customers buy our Common Stock, which may limit the ability of our stockholders to buy and sell our Common Stock and could have an adverse effect on the market for our shares.

There may be additional risks because we completed a reverse merger transaction in June 2013.

Additional risks may exist because we completed a “reverse merger” transaction in June 2013. Securities analysts of major brokerage firms may not provide coverage of the Company because there may be little incentive to brokerage firms to recommend the purchase of our Common Stock. There may also be increased scrutiny by the SEC and other government agencies and holders of our securities due to the nature of the transaction, as there has been increased focus on transactions such as the Merger in recent years. Further, since the Company existed as a “shell company” under applicable rules of the SEC up until the closing of the Merger on June 26, 2013, there will be certain restrictions and limitations on the Company going forward relating to any potential future issuances of additional securities to raise funding and compliance with applicable SEC rules and regulations.

The Company may have material liabilities that were not discovered before the closing of the Merger.

The Company may have material liabilities that were not discovered before the consummation of the Merger. We could experience losses as a result of any such unasserted liabilities that are eventually found to be incurred, which could materially harm our business and financial condition. Although the Merger Agreement contained customary representations and warranties from the Company concerning its assets, liabilities, financial condition and affairs, there may be limited or no recourse against the Company’s prior owners or principals in the event those prove to be untrue. As a result, the stockholders of the Company bear risks relating to any such unknown or unasserted liabilities.

Certain of our directors and officers own a significant percentage of our capital stock and are able to exercise significant influence over the Company.

Certain of our directors and executive officers own a significant percentage of our outstanding capital stock. As of October 15, 2015, Dr. Terrence W. Norchi, our President, Chief Executive Officer and a director, Dr. Avtar Dhillon, the Chairman of our Board of Directors, and James R. Sulat, a director, beneficially own (as determined under Section 13(d) of the Exchange Act and the rules and regulations thereunder) approximately 20% of our shares of Common Stock. Accordingly, these members of our Board of Directors and management team have substantial voting power to approve matters requiring stockholder approval, including without limitation the election of directors, and have significant influence over our affairs. This concentration of ownership could have the effect of delaying or preventing a change in control of our Company, even if such a change in control would be beneficial to our stockholders.

The elimination of monetary liability against our directors and officers under Nevada law and the existence of indemnification rights held by our directors, officers and employees may result in substantial expenditures by us and may discourage lawsuits against our directors, officers and employees.

Our articles of incorporation eliminate the personal liability of our directors and officers to our Company and our stockholders for damages for breach of fiduciary duty as a director or officer to the extent permissible under Nevada law. Further, our amended and restated bylaws provide that we are obligated to indemnify any of our directors or officers to the fullest extent authorized by Nevada law and, subject to certain conditions, advance the expenses incurred by any director or officer in defending any action, suit or proceeding prior to its final disposition. Those indemnification obligations could result in our Company incurring substantial expenditures to cover the cost of settlement or damage awards against our directors or officers, which we may be unable to recoup. These provisions and resultant costs may also discourage us from bringing a lawsuit against any of our current or former directors or officers for breaches of their fiduciary duties, and may similarly discourage the filing of derivative litigation by our stockholders against our directors and officers even if such actions, if successful, might otherwise benefit us or our stockholders.

We are subject to the   reporting requirements of federal securities laws, compliance with which involves significant time, expense and expertise.

We are a public reporting company in the U.S., and, accordingly, are subject to the information and reporting requirements of the Exchange Act and other federal securities laws, including the obligations imposed by the Sarbanes-Oxley Act. The costs associated with preparing and filing annual, quarterly and current reports, proxy statements and other information with the SEC in the ordinary course, as well as preparing and filing audited financial statements, has caused, and could continue to cause, our operational expenses to remain at higher levels or continue to increase.

Our present management team has limited experience in managing public companies. It will be time consuming, difficult and costly for our management team to acquire additional expertise and experience in operating a public company, and to develop and implement the additional internal controls and reporting procedures required by Sarbanes-Oxley and other applicable securities laws. We will need to hire additional financial reporting, internal controls, accounting and other finance staff as well as additional IT systems in order to develop and implement appropriate internal controls and reporting procedures as required by applicable securities regulations for public companies, which we may not be able to do on a timely basis or at all.  

Shares of our Common Stock that have not been registered under federal securities laws are subject to resale restrictions imposed by Rule 144. In addition, any shares of our Common Stock that are held by affiliates, including any that are registered, will be subject to the resale restrictions of Rule 144.

Rule 144 imposes requirements on us and our stockholders that must be met in order to effect a sale thereunder. As a result, it will be more difficult for us to raise funding to support our operations through the sale of debt or equity securities unless we agree to register such securities under the Securities Act, which could cause us to expend significant additional time and cash resources and which we presently have no intention to pursue. Further, it may be more difficult for us to compensate our employees and consultants with our securities instead of cash. We were a shell company prior to the closing of the Merger, and such status could also limit our use of our securities to pay for any acquisitions we may seek to pursue in the future (although none are currently planned), and could cause the value of our securities to decline. In addition, any shares held by affiliates, including shares received in any registered offering, will be subject to certain additional requirements in order to effect a sale of such shares under Rule 144.

We do not intend to pay cash dividends on our capital stock in the foreseeable future.

We have never declared or paid any dividends on our shares and do not anticipate paying any such dividends in the foreseeable future. Any future payment of cash dividends would depend on our financial condition, contractual restrictions, solvency tests imposed by applicable corporate laws, results of operations, anticipated cash requirements and other factors and will be at the discretion of our Board of Directors. In addition, under the terms of the MLSC Loan Agreement, we must obtain MLSC’s prior consent before declaring or paying any dividends during the term of the MLSC Loan Agreement. As a result, our stockholders should not expect that we will ever pay cash or other dividends on our outstanding capital stock.

We are at risk of securities class action litigation that could result in substantial   costs and divert management’s attention and resources.

In the past, securities class action litigation has been brought against companies following periods of volatility of its securities in the marketplace, particularly following a company’s initial public offering. Due to the volatility of our stock price, we could be the target of securities litigation in the future. Securities litigation could result in substantial costs and divert management’s attention and resources.