ROCKWELL AUTOMATION INC (Form: 10-Q, Received: 07/29/2008 12:27:55)

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-Q

QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d)

OF THE SECURITIES EXCHANGE ACT OF 1934


For the Quarterly Period Ended		June 30, 2008

Commission file number		1-12383

Rockwell Automation, Inc.

(Exact name of registrant as specified in its charter)

Delaware

25-1797617

(State or other jurisdiction

of incorporation or organization)

(I.R.S. Employer

Identification No.)

1201 South Second Street, Milwaukee, Wisconsin 53204

(Address of principal executive offices) (Zip Code)


Registrant’s telephone number,
including area code		(414) 382-2000

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes þ No ¨

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer or a non-accelerated filer. See definition of “accelerated filer and large accelerated filer” in Rule 12b-2 of the Exchange Act. (Check one):

Large Accelerated Filer þ Accelerated Filer ¨ Non-accelerated Filer ¨

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes ¨ No þ

145,590,124 shares of registrant’s Common Stock, $1.00 par value, were outstanding on June 30, 2008.

ROCKWELL AUTOMATION, INC.

INDEX


		Page No.

PART I. FINANCIAL INFORMATION

Item 1.	Condensed Consolidated Financial Statements:

	Condensed Consolidated Balance Sheet— June 30, 2008 and September 30, 2007	2

	Condensed Consolidated Statement of Operations— Three and Nine Months Ended June 30, 2008 and 2007	3

	Condensed Consolidated Statement of Cash Flows— Nine Months Ended June 30, 2008 and 2007	4

	Notes to Condensed Consolidated Financial Statements	5

	Report of Independent Registered Public Accounting Firm	19

Item 2.	Management’s Discussion and Analysis of Financial Condition and Results of Operations	20

Item 3.	Quantitative and Qualitative Disclosures About Market Risk	37

Item 4.	Controls and Procedures	37

PART II. OTHER INFORMATION

Item 1.	Legal Proceedings	38

Item 1A.	Risk Factors	40

Item 2.	Unregistered Sales of Equity Securities and Use of Proceeds	40

Item 6.	Exhibits	41

Signatures		42

PART I. FINANCIAL INFORMATION

Item 1.

Condensed Consolidated Financial Statements

ROCKWELL AUTOMATION, INC.

CONDENSED CONSOLIDATED BALANCE SHEET

(Unaudited)

(in millions)


	June 30, 2008			September 30, 2007
ASSETS
Current assets:
Cash and cash equivalents	$	805.9		$	624.2
Receivables		990.3			927.7
Inventories		602.2			504.7
Deferred income taxes		197.5			170.2
Other current assets		145.0			155.2

Total current assets		2,740.9			2,382.0

Property, net		535.6			510.3
Goodwill		946.2			858.5
Other intangible assets, net		263.6			243.4
Deferred income taxes		26.0			25.3
Prepaid pension		419.8			384.3
Other assets		179.2			142.0

TOTAL	$	5,111.3		$	4,545.8

LIABILITIES AND SHAREOWNERS’ EQUITY
Current liabilities:
Short-term debt	$	334.1		$	173.2
Current portion of long-term debt		—			348.2
Accounts payable		490.7			498.5
Compensation and benefits		203.2			198.4
Income taxes payable		40.7			79.8
Other current liabilities		512.9			446.4

Total current liabilities		1,581.6			1,744.5

Long-term debt		904.2			405.7
Retirement benefits		416.6			401.4
Other liabilities		312.3			251.4

Commitments and contingent liabilities (Note 12)

Shareowners’ equity:
Common stock (shares issued: 216.4)		216.4			216.4
Additional paid-in capital		1,271.6			1,247.5
Retained earnings		4,363.0			4,098.1
Accumulated other comprehensive loss		(79.4	)		(169.7	)
Common stock in treasury, at cost (shares held: June 30, 2008, 70.8; September 30, 2007, 67.0)		(3,875.0	)		(3,649.5	)

Total shareowners’ equity		1,896.6			1,742.8

TOTAL	$	5,111.3		$	4,545.8

See Notes to Condensed Consolidated Financial Statements.

ROCKWELL AUTOMATION, INC.

CONDENSED CONSOLIDATED STATEMENT OF OPERATIONS

(Unaudited)

(in millions, except per share amounts)


	Three Months Ended June 30,						Nine Months Ended June 30,
	2008			2007			2008			2007
Sales
Products and solutions	$	1,335.7		$	1,164.0		$	3,817.3		$	3,295.6
Services		139.3			116.6			396.2			337.8

		1,475.0			1,280.6			4,213.5			3,633.4
Cost of Sales
Products and solutions		(771.3	)		(650.6	)		(2,188.0	)		(1,873.4	)
Services		(98.1	)		(78.9	)		(273.1	)		(236.8	)

		(869.4	)		(729.5	)		(2,461.1	)		(2,110.2	)

Gross profit		605.6			551.1			1,752.4			1,523.2

Selling, general and administrative expenses		(377.6	)		(319.7	)		(1,084.5	)		(938.4	)
Other income		2.1			9.5			16.4			21.1
Interest expense		(16.6	)		(13.8	)		(52.1	)		(48.5	)

Income from continuing operations before income taxes		213.5			227.1			632.2			557.4
Income tax provision		(60.9	)		(59.6	)		(180.2	)		(151.9	)


Income from continuing operations		152.6			167.5			452.0			405.5

Income from discontinued operations
Income from discontinued operating activities of Power Systems		—			—			—			42.3
Gain on sale of Power Systems (Note 13 and 14)		—			(0.7	)		—			866.5
Other		—			(2.6	)		—			8.3

Income from discontinued operations		—			(3.3	)		—			917.1

Net income	$	152.6		$	164.2		$	452.0		$	1,322.6

Basic earnings per share:
Continuing operations	$	1.04		$	1.09		$	3.07		$	2.51
Discontinued operations		—			(0.02	)		—			5.69

Net income	$	1.04		$	1.07		$	3.07		$	8.20

Diluted earnings per share:
Continuing operations	$	1.03		$	1.07		$	3.03		$	2.47
Discontinued operations		—			(0.02	)		—			5.60

Net income	$	1.03		$	1.05		$	3.03		$	8.07

Cash dividends per share	$	0.58		$	0.58		$	1.16		$	1.16

Weighted average outstanding shares:
Basic		146.3			154.0			147.3			161.3

Diluted		148.1			156.5			149.3			163.9

See Notes to Condensed Consolidated Financial Statements.

ROCKWELL AUTOMATION, INC.

CONDENSED CONSOLIDATED STATEMENT OF CASH FLOWS

(Unaudited)

(in millions)


	Nine Months Ended June 30,
	2008			2007
Continuing Operations:
Operating Activities:
Net income	$	452.0		$	1,322.6
Income from discontinued operations		—			917.1

Income from continuing operations		452.0			405.5

Adjustments to arrive at cash provided by operating activities:
Depreciation		74.1			69.5
Amortization of intangible assets		26.8			16.6
Share-based compensation expense		24.6			22.6
Retirement benefits expense		33.5			44.7
Pension trust contributions		(31.6	)		(26.0	)
Net (gain) loss on disposition of securities and property		(5.8	)		0.4
Income tax benefit from the exercise of stock options		0.2			1.1
Excess income tax benefit from the exercise of stock options		(3.9	)		(21.4	)
Changes in assets and liabilities, excluding effects of foreign currency adjustments:
Receivables		(21.7	)		(85.9	)
Inventories		(86.3	)		(52.2	)
Accounts payable		(42.0	)		5.0
Compensation and benefits		(2.0	)		(19.6	)
Income taxes		(30.4	)		(164.1	)
Other assets and liabilities		(35.2	)		68.0

Cash Provided by Operating Activities		352.3			264.2

Investing Activities:
Capital expenditures		(102.8	)		(82.1	)
Acquisition of businesses, net of cash acquired		(112.4	)		(44.6	)
Proceeds from sales of available for sale securities		36.3			—
Proceeds from sale of property and business		6.9			1,744.6
Other investing activities		(2.9	)		(3.2	)

Cash (Used for) Provided by Investing Activities		(174.9	)		1,614.7

Financing Activities:
Net issuance (repayments) of short-term debt		160.9			(170.0	)
Issuance of long-term debt		493.5			—
Repayments of long-term debt		(351.3	)		—
Cash dividends		(128.4	)		(140.8	)
Purchases of treasury stock		(226.9	)		(1,263.8	)
Proceeds from the exercise of stock options		12.2			51.8
Excess income tax benefit from the exercise of stock options		3.9			21.4
Other financing activities		(0.3	)		(0.4	)

Cash Used for Financing Activities		(36.4	)		(1,501.8	)

Effect of exchange rate changes on cash		46.8			18.3

Cash Provided by Continuing Operations		187.8			395.4


Discontinued Operations:
Cash Used for Discontinued Operating Activities		(6.1	)		(1.9	)
Cash Used for Discontinued Investing Activities		—			(6.5	)
Cash Used for Discontinued Financing Activities		—			(0.8	)

Cash Used for Discontinued Operations		(6.1	)		(9.2	)

Increase in Cash and Cash Equivalents		181.7			386.2
Cash and Cash Equivalents at Beginning of Period		624.2			408.1

Cash and Cash Equivalents at End of Period	$	805.9		$	794.3

See Notes to Condensed Consolidated Financial Statements.

ROCKWELL AUTOMATION, INC.

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS

(Unaudited)

1.	Basis of Presentation and Accounting Policies

In the opinion of management of Rockwell Automation, Inc. (the Company or Rockwell Automation), the unaudited Condensed Consolidated Financial Statements contain all adjustments, consisting solely of adjustments of a normal recurring nature, necessary to present fairly the financial position, results of operations, and cash flows for the periods presented. These statements should be read in conjunction with our Annual Report on Form 10-K for the fiscal year ended September 30, 2007. The results of operations for the three and nine month periods ended June 30, 2008 are not necessarily indicative of the results for the full year. All date references to years and quarters herein refer to our fiscal year and fiscal quarter unless otherwise stated.

Revenue

Product and solution revenues consist of industrial automation power, control, information and custom-engineered hardware and software products and systems. Service revenues include multi-vendor customer technical support and repair, asset management and optimization consulting and training.

Cash and Cash Equivalents

Cash and cash equivalents include time deposits and certificates of deposit with original maturities of three months or less at the time of purchase.

Receivables

Receivables are stated net of allowances for doubtful accounts of $16.0 million at June 30, 2008 and $12.4 million at September 30, 2007. In addition, receivables are stated net of an allowance for certain customer returns, rebates and incentives of $9.8 million at June 30, 2008 and $8.1 million at September 30, 2007.

Income Taxes

At the end of each interim reporting period, we estimate a base effective tax rate, which is the effective tax rate that we expect for the full fiscal year based on our most recent forecast of pretax income, permanent book and tax differences and global tax planning strategies. We use this base rate to provide for income taxes on a year-to-date basis, excluding the effect of significant unusual or extraordinary items or items that are reported net of their related tax effects. We recognize the tax effect of significant unusual or extraordinary items or items that are reported net of their tax effects in the period in which they are realizable. Financial Accounting Standards Board (FASB) Interpretation No. 48, Accounting for Uncertainty in Income Taxes (FIN 48) became effective for us on October 1, 2007. See Note 14 for further details regarding income taxes.

Earnings Per Share

We present basic and diluted earnings per share (EPS) amounts. Basic EPS is calculated by dividing net income by the weighted average number of common shares outstanding during the applicable period. Diluted EPS amounts are based upon the weighted average number of common and common equivalent shares outstanding during the applicable period. The difference between basic and diluted EPS is attributable to share-based compensation awards. We use the treasury stock method to calculate the effect of outstanding share-based compensation awards, which requires us to compute total employee proceeds as the sum of (a) the amount the employee must pay upon exercise of the award, (b) the amount of unearned share-based compensation costs attributed to future services and (c) the amount of tax benefits, if any, that would be credited to additional paid-in capital assuming exercise of the award. Share-based compensation awards for which the total employee proceeds exceed the average market price over the applicable period have an antidilutive effect on EPS, and accordingly, we exclude them from the calculation of diluted EPS. For the three and nine months ended June 30, 2008, share-based compensation awards of 2.8 million and 2.5 million shares, respectively, were excluded from the diluted EPS calculation because they were antidilutive. For the three and nine months ended June 30, 2007, share-based compensation awards of 1.3 million and 1.6 million shares, respectively, were excluded from the diluted EPS calculation because they were antidilutive.

ROCKWELL AUTOMATION, INC.

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS

(Unaudited)

1.	Basis of Presentation and Accounting Policies—(Continued)

The following table reconciles basic weighted average outstanding shares to diluted weighted average outstanding shares (in millions):


	Three Months Ended June 30,		Nine Months Ended June 30,
	2008	2007	2008	2007
Weighted average outstanding shares
Basic weighted average outstanding shares	146.3	154.0	147.3	161.3
Effect of dilutive securities
Stock options	1.7	2.4	1.9	2.5
Restricted stock	0.1	0.1	0.1	0.1

Diluted weighted average outstanding shares	148.1	156.5	149.3	163.9

Non-Cash Financing Activities

In June 2008, we repurchased 740,000 shares of our common stock for $32.3 million that did not settle until July 2008. In June 2007, we repurchased 75,000 shares of our common stock for $5.1 million that did not settle until July 2007. These outstanding purchases were recorded in accounts payable at June 30, 2008 and 2007.

Recent Accounting Pronouncements

Statement of Financial Accounting Standard (SFAS) No. 158, Employers’ Accounting for Defined Benefit Pension and Other Postretirement Plans, an amendment of FASB Statements No. 87, 88, 106 and 132(R) (SFAS 158), became effective for us as of September 30, 2007. SFAS 158 required us to recognize an asset or liability in our consolidated balance sheet reflecting the funded status of our pension and other postretirement benefit plans, with current-year changes in the funded status recognized in shareowners’ equity. SFAS 158 did not change the existing criteria for measuring periodic benefit costs, plan assets or benefit obligations. Additionally, SFAS 158 will require us to measure the funded status on the date of our annual audited Consolidated Balance Sheet as of September 30, 2009.

In April 2008, the FASB issued FASB Staff Position (FSP) 142-3, Determination of the Useful Life of Intangible Assets (FSP 142-3). FSP 142-3 intends to improve the consistency between the useful life of a recognized intangible asset under SFAS 142, Goodwill and Other Intangible Assets and the period of expected cash flows used to measure the fair value of the asset under SFAS 141 (Revised 2007), Business Combinations (SFAS 141R) and other accounting principles generally accepted in the United States. FSP 142-3 will apply to us beginning in 2010. We are evaluating FSP 142-3 to determine the effect on our financial statements and related disclosures.

In March 2008, the FASB issued SFAS No. 161, Disclosures about Derivative Instruments and Hedging Activities – an amendment of FASB Statement No. 133 (SFAS 161). SFAS 161 amends and expands the disclosures required by SFAS 133 so that they provide an enhanced understanding of how and why a company uses derivative instruments, how derivative instruments and related hedged items are accounted for under SFAS 133 and its related interpretations, and how derivative instruments affect an entity’s financial position, financial performance and cash flows. SFAS 161 will apply to us beginning in the second quarter of 2009. We do not believe SFAS 161 will have a material effect on our financial statements; we will expand our disclosures in accordance with the requirements of SFAS 161 upon adoption.

ROCKWELL AUTOMATION, INC.

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS

(Unaudited)

1.	Basis of Presentation and Accounting Policies—(Continued)

In December 2007, the FASB issued SFAS No. 141R. SFAS 141R requires an acquirer to recognize the assets acquired, the liabilities assumed, and any noncontrolling interest in the acquiree at the acquisition date, measured at their fair values as of that date. SFAS 141R also requires the acquirer to recognize and measure the goodwill acquired in a business combination or a gain from a bargain purchase and prescribes how to evaluate the nature and financial effects of the business combination. It also provides guidance for the accounting of pre-acquisition gain and loss contingencies and acquisition-related transaction costs. SFAS 141R will apply to us beginning in 2010. We are evaluating the statement to determine the effect on our financial statements and related disclosures.

In December 2007, the FASB issued SFAS No. 160, Noncontrolling Interests in Consolidated Financial Statements-an amendment of ARB No. 51 (SFAS 160). SFAS 160 amends ARB 51 to establish accounting and reporting standards for the noncontrolling (minority) interest in a subsidiary and for the deconsolidation of a subsidiary. It clarifies that a noncontrolling interest in a subsidiary is an ownership interest in the consolidated entity that should be reported as equity in the consolidated financial statements and establishes a single method of accounting for changes in a parent’s ownership interest in a subsidiary that does not result in deconsolidation. SFAS 160 will apply to us beginning in 2010. We are evaluating the statement to determine the effect on our financial statements and related disclosures.

In June 2007, the FASB ratified Emerging Issues Task Force Issue No. 06-11, Accounting for Income Tax Benefits of Dividends on Share-Based Payment Awards (EITF 06-11). EITF 06-11 specifies how companies should recognize the income tax benefit received on dividends that are (a) paid to employees holding equity-classified nonvested shares, equity-classified nonvested share units, or equity-classified outstanding share options and (b) charged to retained earnings under SFAS 123(R). EITF 06-11 will apply to us beginning in 2009. We do not believe EITF 06-11 will have a material effect on our financial statements and related disclosures.

In February 2007, the FASB issued SFAS No. 159, The Fair Value Option for Financial Assets and Financial Liabilities (SFAS 159). SFAS 159 permits companies to choose to measure at fair value many financial instruments and certain other items that are not currently required to be measured at fair value. SFAS 159 will apply to us beginning in 2009. We do not believe SFAS 159 will have a material effect on our financial statements and related disclosures.

In September 2006, the FASB issued SFAS No. 157, Fair Value Measurements (SFAS 157). SFAS 157 defines fair value, establishes a framework for measuring fair value and expands disclosures about fair value measurements. It also establishes a fair value hierarchy that prioritizes information used in developing assumptions when pricing an asset or liability. SFAS 157 will apply to us beginning in fiscal 2009 for financial assets and liabilities and fiscal 2010 for non-financial assets and liabilities. We are evaluating the statement to determine the effect on our financial statements and related disclosures.

ROCKWELL AUTOMATION, INC.

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS

(Unaudited)

2.	Share-Based Compensation

We recognized $8.7 million and $24.6 million in share-based compensation expense in income from continuing operations before income taxes during the three and nine months ended June 30, 2008, respectively. We recognized $7.9 million and $22.6 million in share-based compensation expense in income from continuing operations before income taxes during the three and nine months ended June 30, 2007, respectively.

Our annual grant of share-based compensation takes place during the first quarter of each fiscal year. The number of shares granted to all employees and directors and the weighted average fair value per share during the periods presented was (in thousands except per share amounts):


	Nine Months Ended June 30,
	2008			2007
	Grants	Wtd. Avg. Share Fair Value		Grants	Wtd. Avg. Share Fair Value
Stock options	1,578	$	17.58	1,163	$	20.01
Performance shares	121		70.32	99		72.24
Restricted stock awards	71		66.67	61		63.34

Total shares granted	1,770		23.15	1,323		25.93

3.	Acquisitions and Divestitures

Acquisitions

During the nine months ended June 30, 2008, our Architecture & Software segment acquired CEDES Safety & Automation AG (CEDES), Incuity Software, Inc. (Incuity), and Pavilion Technologies, Inc. (Pavilion). The aggregate purchase price of these three acquisitions was $114.4 million.

We acquired CEDES in May 2008. Swiss-based CEDES is a supplier of safety and measuring light curtains, as well as other safety and non-safety optoelectronics, control units and related accessories for industrial applications. We expect to complete the final purchase price allocation for this acquisition during fiscal 2009 when we finalize the valuation of the intangible assets acquired.

We also acquired Incuity, which is a supplier of Enterprise Manufacturing Intelligence (EMI) software, in May 2008. Incuity’s software provides real-time intelligence for business decision support to improve operations and reduce production waste by providing valuable management insight into a company’s operations. We expect to complete the final purchase price allocation for this acquisition during fiscal 2009 when we finalize the valuation of the intangible assets acquired.

We acquired Pavilion, a company that is a recognized leader in advanced process control, production optimization and environmental compliance solutions for process and hybrid industries, in November 2007. We expect to complete the final purchase price allocation for this acquisition by the end of fiscal 2008 when we finalize the valuation of the intangible assets acquired.

We recorded intangible assets of $41.9 million and goodwill of $70.5 million resulting from the preliminary purchase price allocations of the CEDES, Incuity and Pavilion acquisitions, which are pending the finalization of the intangible asset valuations and other matters. We allocated all preliminary intangible assets to the other intangible asset category. We assigned the full amount of goodwill to our Architecture & Software segment. None of the goodwill recorded is expected to be deductible for local tax purposes.

In fiscal 2007, our Control Products & Solutions segment acquired Industrial Control Services Group Limited, which does business as ICS Triplex, and ProsCon Holdings Ltd. (ProsCon). The aggregate purchase price of these two acquisitions was approximately $268.8 million in cash.

ICS Triplex, headquartered in the United Kingdom and acquired in July 2007, is a leading global supplier of critical control and safety solutions to process industries. It develops, delivers and maintains advanced products and solutions for high availability, fault-tolerant applications in process industry segments worldwide. It serves primarily the oil and gas, chemicals and power generation industries.

ROCKWELL AUTOMATION, INC.

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS

(Unaudited)

3.	Acquisitions and Divestitures—(Continued)

ProsCon is a process solutions systems integrator headquartered in Ireland that we acquired in February 2007. Its areas of expertise include process technology and control systems and information technology, and it serves customers primarily in the pharmaceutical and biotechnology industries.

We recorded intangible assets of $121.7 million resulting from the final purchase price allocations of the ICS Triplex and ProsCon acquisitions. Intangible assets assigned include $49.5 million to customer relationships (12-year weighted average useful life), $28.3 million to technology (10-year weighted average useful life), $14.4 million to other intangible assets (7-year weighted average useful life) and $29.5 million to intangible assets not subject to amortization (related to the ICS Triplex™ trademark). We recorded a charge of $1.3 million during the fourth quarter of 2007 for in-process research and development in cost of sales related to the acquisition of ICS Triplex. We recognized goodwill of $142.0 million related to these transactions, none of which is expected to be deductible for local tax purposes. We assigned the full amount of goodwill to our Control Products & Solutions segment.

The results of operations of the acquired businesses have been included in our Condensed Consolidated Statement of Operations since the dates of acquisition. Pro forma financial information and allocation of the purchase price is not presented as the individual effects of these acquisitions are not material to our results of operations and financial position.

Divestitures

On January 31, 2007, we divested our Dodge mechanical and Reliance Electric motors and motor repair services businesses to Baldor Electric Company (Baldor). These were the principal businesses of our former Power Systems operating segment. See Note 13 for more information.

4.	Inventories

Inventories consist of (in millions):


	June 30, 2008		September 30, 2007
Finished goods	$	239.5	$	184.9
Work in process		134.2		130.4
Raw materials, parts, and supplies		228.5		189.4

Inventories	$	602.2	$	504.7

We report inventories net of the allowance for excess and obsolete inventory of $41.8 million at June 30, 2008 and $36.3 million at September 30, 2007.

5.	Property

Property consists of (in millions):


	June 30, 2008			September 30, 2007
Land	$	5.2		$	7.5
Buildings and improvements		269.3			255.6
Machinery and equipment		1,105.3			1,097.3
Internal use software		286.9			241.7
Construction in progress		56.4			63.0

Total		1,723.1			1,665.1
Less accumulated depreciation		(1,187.5	)		(1,154.8	)

Property, net	$	535.6		$	510.3

ROCKWELL AUTOMATION, INC.

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS

(Unaudited)

6.	Goodwill and Other Intangible Assets

Changes in the carrying amount of goodwill for the nine months ended June 30, 2008 are (in millions):


	Architecture & Software			Control Products & Solutions		Total
Balance as of September 30, 2007	$	335.1		$	523.4	$	858.5
Acquisition of businesses		70.5			—		70.5
Translation and other		(0.8	)		18.0		17.2

Balance as of June 30, 2008	$	404.8		$	541.4	$	946.2

Other intangible assets consist of (in millions):


	June 30, 2008
	Carrying Amount		Accumulated Amortization			Net
Amortized intangible assets:
Computer software products	$	122.7	$	(73.8	)	$	48.9
Customer relationships		54.9		(4.9	)		50.0
Technology		54.7		(21.4	)		33.3
Other		86.0		(27.3	)		58.7

Total amortized intangible assets		318.3		(127.4	)		190.9
Intangible assets not subject to amortization		72.7		—			72.7

Total	$	391.0	$	(127.4	)	$	263.6


	September 30, 2007
	Carrying Amount		Accumulated Amortization			Net
Amortized intangible assets:
Computer software products		111.2		(63.5	)		47.7
Customer relationships		58.0		(2.1	)		55.9
Technology		65.4		(25.0	)		40.4
Other		52.6		(26.9	)		25.7

Total amortized intangible assets		287.2		(117.5	)		169.7
Intangible assets not subject to amortization		73.7		—			73.7

Total	$	360.9	$	(117.5	)	$	243.4

The increase in other intangible assets is primarily due to our preliminary purchase price allocations associated with our acquisitions of CEDES, Incuity and Pavilion.

The Allen-Bradley ^® and ICS Triplex ^TM trademarks have been determined to have an indefinite life, and therefore are not subject to amortization.

Estimated amortization expense is $36.2 million in 2008, $29.8 million in 2009, $22.2 million in 2010, $18.9 million in 2011 and $17.1 million in 2012.

We performed the annual evaluation of our goodwill and indefinite life intangible assets for impairment as required by SFAS No. 142, Goodwill and Other Intangible Assets , during the second quarter of 2008 and concluded that no impairments exist.

ROCKWELL AUTOMATION, INC.

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS

(Unaudited)

7.	Other Current Liabilities

Other current liabilities consist of (in millions):


	June 30, 2008		September 30, 2007
Advance payments from customers and deferred revenue	$	146.0	$	121.5
Customer returns, rebates and incentives		119.2		120.5
Unrealized losses on foreign exchange contracts		43.3		38.2
Product warranty obligations		34.4		34.9
Taxes other than income taxes		38.4		42.2
Dividends payable		42.2		—
Accrued interest		15.3		10.2
Special charges		20.1		19.6
Other		54.0		59.3

Other current liabilities	$	512.9	$	446.4

8.	Product Warranty Obligations

We record a liability for product warranty obligations at the time of sale to a customer based upon historical warranty experience. Most of our products are covered under a warranty period that runs for twelve months from either the date of sale or from installation to an end-user or OEM customer. We also record a liability for specific warranty matters when they become probable and reasonably estimable. Our product warranty obligations are included in other current liabilities in the Condensed Consolidated Balance Sheet.

Changes in the product warranty obligations for the nine months ended June 30, 2008 and 2007 are (in millions):


	Nine Months Ended June 30,
	2008			2007
Balance at beginning of period	$	34.9		$	37.1
Warranties recorded at time of sale		30.7			33.2
Adjustments to pre-existing warranties		—			(2.9	)
Settlement of warranty claims		(31.2	)		(30.9	)

Balance at end of period	$	34.4		$	36.5

ROCKWELL AUTOMATION, INC.

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS

(Unaudited)

9.	Long-term and Short-term Debt

Long-term debt consists of (in millions):


	June 30, 2008			September 30, 2007
6.15% notes, payable in 2008	$	—		$	348.2
5.65% notes, payable in 2017		250.0			—
6.70% debentures, payable in 2028		250.0			250.0
6.25% debentures, payable in 2037		250.0			—
5.20% debentures, payable in 2098		200.0			200.0
Unamortized discount and other		(45.8	)		(44.3	)

Total		904.2			753.9
Less current portion		—			(348.2	)

Long-term debt	$	904.2		$	405.7

In December 2007, we issued an aggregate of $500 million principal amount of our 5.65% notes due 2017 and 6.25% debentures due 2037. The debt offering yielded approximately $493.5 million of proceeds, which were used to repay at maturity our 6.15% notes due January 15, 2008 and for general corporate purposes.

We issued an aggregate of $800 million principal amount of our 6.15% notes, 6.70% debentures and 5.20% debentures in January 1998. The debt offering yielded approximately $750.0 million of proceeds. We issued the 5.20% debentures at a discount, and the 6.15% notes and 6.70% debentures at par.

In September 2002, we entered into an interest rate swap contract (the Swap) that effectively converted our $350.0 million aggregate principal amount of 6.15% notes, payable in 2008, to floating rate debt based on six-month LIBOR. The floating rate was 7.8 percent at September 30, 2007. As permitted by SFAS No. 133, Accounting for Derivative Instruments and Hedging Activities (SFAS 133), as amended, we designated the Swap as a fair value hedge. Accordingly, the fair value of the Swap was recorded in other liabilities in the Condensed Consolidated Balance Sheet with a corresponding adjustment to the carrying value of the underlying debt at September 30, 2007. The fair value of the Swap, based upon quoted market prices for contracts with similar maturities, was a liability of $1.8 million at September 30, 2007. The swap matured on January 15, 2008.

On October 26, 2004, we entered into a five-year $600.0 million unsecured revolving credit facility. Our $600.0 million credit facility remains in effect and we have not drawn down under it at June 30, 2008 or September 30, 2007. Borrowings under our credit facility bear interest based on short-term money market rates in effect during the period the borrowings are outstanding. The terms of our credit facility contain covenants under which we would be in default if our debt-to-total-capital ratio was to exceed 60 percent. We were in compliance with all covenants under our credit facility at June 30, 2008 and September 30, 2007. In addition to our $600.0 million credit facility, short-term unsecured credit facilities of approximately $196.2 million at June 30, 2008 were available to foreign subsidiaries. There were no significant commitment fees or compensating balance requirements under any of our credit facilities. Borrowings under our credit facilities during the three and nine months ended June 30, 2008 and 2007 were not significant.

Our short-term debt obligations primarily relate to commercial paper borrowings. Commercial paper borrowings outstanding were $334.0 million at June 30, 2008 and $173.0 million at September 30, 2007. At June 30, 2008, the weighted average interest rate and maturity period of the commercial paper outstanding were 2.3 percent and four days, respectively. At September 30, 2007, the weighted average interest rate and maturity period of the commercial paper outstanding were 5.1 percent and three days, respectively.

ROCKWELL AUTOMATION, INC.

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS

(Unaudited)

10.

Retirement Benefits

The components of net periodic benefit cost in income from continuing operations are (in millions):


	Pension Benefits
	Three Months Ended June 30,						Nine Months Ended June 30,
	2008			2007			2008			2007
Service cost	$	14.5		$	15.3		$	43.4		$	41.9
Interest cost		37.6			33.3			112.4			91.3
Expected return on plan assets		(48.6	)		(41.7	)		(145.3	)		(115.5	)
Amortization:
Prior service cost		(1.1	)		(1.2	)		(3.4	)		(3.6	)
Net transition obligation		0.1			—			0.3			—
Net actuarial loss		4.8			9.9			14.5			21.7

Net periodic benefit cost	$	7.3		$	15.6		$	21.9		$	35.8


	Other Postretirement Benefits
	Three Months Ended June 30,						Nine Months Ended June 30,
	2008			2007			2008			2007
Service cost	$	1.0		$	1.4		$	2.9		$	3.0
Interest cost		3.4			4.7			10.3			9.5
Amortization:
Prior service cost		(3.7	)		(4.1	)		(11.0	)		(12.3	)
Net actuarial loss		3.2			4.7			9.4			8.7

Net periodic benefit cost	$	3.9		$	6.7		$	11.6		$	8.9

Excluded from these net periodic benefit cost tables but included in income from discontinued operations in the Condensed Consolidated Statement of Operations is pre-tax pension benefit cost of $3.3 million and pre-tax other postretirement benefit cost of $4.7 million for the nine months ended June 30, 2007. Also in the nine months ended June 30, 2007, we recognized a pension curtailment loss of $0.4 million, an other postretirement benefits curtailment gain of $45.2 million and an additional other postretirement benefits settlement gain of $11.4 million. These costs, loss and gains are related to our Dodge mechanical and Reliance Electric motors and motor repair services businesses and the sale thereof and are reflected in income from discontinued operations in the Condensed Consolidated Statement of Operations. In connection with the sale of our Dodge mechanical and Reliance Electric motors and motor repair services businesses, we retained the pension liability related to eligible Power Systems participants in our U.S. Plan and Canada Salary Plan and the other postretirement benefit liability for eligible U.S. non-union and Canada Salary retirees as of the date of the sale, which will result in ongoing net periodic benefit cost for us. Pension liabilities for our Canada Hourly Plan and Mexico Dodge Plan, as well as other postretirement liabilities, including for U.S. union active and retiree participants, have been transferred with these businesses.

In the first nine months of 2007, we made a voluntary contribution of $8.0 million to our U.S. qualified pension plan trust, which increased our prepaid pension asset in the Condensed Consolidated Balance Sheet.

ROCKWELL AUTOMATION, INC.

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS

(Unaudited)

11.

Comprehensive Income

Comprehensive income consists of (in millions):


	Three Months Ended June 30,						Nine Months Ended June 30,
	2008			2007			2008			2007
Net income	$	152.6		$	164.2		$	452.0		$	1,322.6
Other comprehensive income:
Unrecognized pension and postretirement benefit plan liabilities		1.6			—			4.8			—
Currency translation adjustments		(12.9	)		29.9			95.3			56.1
Net unrealized gains (losses) on cash flow hedges		6.3			(0.4	)		(7.7	)		(6.8	)
Unrealized (realized) gains on investment securities		—			10.3			(2.6	)		13.9
Other		—			(0.5	)		0.5			(1.9	)

Other comprehensive income		(5.0	)		39.3			90.3			61.3

Comprehensive income	$	147.6		$	203.5		$	542.3		$	1,383.9

12.

Commitments and Contingent Liabilities

Various lawsuits, claims and proceedings have been or may be instituted or asserted against us relating to the conduct of our business, including those pertaining to product liability, safety and health, intellectual property, employment and contract matters. Although the outcome of litigation cannot be predicted with certainty and some lawsuits, claims or proceedings may be disposed of unfavorably to us, we believe the disposition of matters that are pending or have been asserted will not have a material adverse effect on our business or financial condition.

We (including our subsidiaries) have been named as a defendant in lawsuits alleging personal injury as a result of exposure to asbestos that was used in certain components of our products many years ago. Currently there are thousands of claimants in lawsuits that name us as defendants, together with hundreds of other companies. In some cases, the claims involve products from divested businesses, and we are indemnified for most of the costs. However, we have agreed to defend and indemnify asbestos claims associated with products manufactured or sold by our Dodge mechanical and Reliance Electric motors and motor repair services businesses prior to their divestiture by us, which occurred on January 31, 2007. We are also responsible for half of the costs and liabilities associated with asbestos cases against Rockwell International Corporation’s (RIC’s) divested measurement and flow control business. But in all cases, for those claimants who do show that they worked with our products or products of divested businesses for which we are responsible, we nevertheless believe we have meritorious defenses, in substantial part due to the integrity of the products, the encapsulated nature of any asbestos-containing components, and the lack of any impairing medical condition on the part of many claimants. We defend those cases vigorously. Historically, we have been dismissed from the vast majority of these claims with no payment to claimants.

We have maintained insurance coverage that we believe covers indemnity and defense costs, over and above self-insured retentions, for claims arising from our former Allen-Bradley subsidiary. Following litigation against Nationwide Indemnity Company and Kemper Insurance, the insurance carriers that provided liability insurance coverage to Allen-Bradley, we entered into separate agreements on April 1, 2008 with both insurance carriers to further resolve responsibility for ongoing and future coverage of Allen-Bradley asbestos claims. In exchange for a lump sum payment, Kemper bought out its remaining liability and has been released from further insurance obligations to Allen-Bradley. Nationwide will receive and administer the Kemper buyout funds and has entered into a cost share agreement to pay the substantial majority of future defense and indemnity costs for Allen-Bradley asbestos claims once the Kemper buy-out funds are depleted. We believe that these arrangements will continue to provide coverage for Allen-Bradley asbestos claims throughout the remaining life of the asbestos liability.

ROCKWELL AUTOMATION, INC.

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS

(Unaudited)

12.

Commitments and Contingent Liabilities—(Continued)

The uncertainties of asbestos claim litigation make it difficult to predict accurately the ultimate outcome of asbestos claims. That uncertainty is increased by the possibility of adverse rulings or new legislation affecting asbestos claim litigation or the settlement process. Subject to these uncertainties and based on our experience defending asbestos claims, we do not believe these lawsuits will have a material adverse effect on our financial condition.

We have, from time to time, divested certain of our businesses. In connection with such divestitures, lawsuits, claims and proceedings may be instituted or asserted against us related to the period that we owned the businesses.

In connection with the divestiture of our former aerospace and defense businesses (the A&D Business) to The Boeing Company (Boeing), we agreed to indemnify Boeing for certain matters related to operations of the A&D Business for periods prior to the divestiture. In connection with the spin-offs of our former automotive component systems business, semiconductor systems business and Rockwell Collins avionics and communications business, the spun-off companies have agreed to indemnify us for substantially all contingent liabilities related to the respective businesses, including environmental and intellectual property matters.

In connection with the sale of our Dodge mechanical and Reliance Electric motors and motor repair services businesses, we agreed to indemnify Baldor for damages related to certain legal, legacy environmental and asbestos matters of these businesses arising prior to January 31, 2007, for which the maximum exposure would be capped at the purchase price.

The former RIC operated the Rocky Flats Plant (the Plant), Golden, Colorado, from 1975 through 1989 for the Department of Energy (DOE). Incident to Boeing’s acquisition of RIC in 1996, we agreed to indemnify RIC and Boeing for any liability arising out of RIC’s activities at the Plant to the extent such liability is not assumed or indemnified by the U.S. government.

On January 30, 1990, a class action was filed in the United States District Court for the District of Colorado against RIC and another former operator of the Plant. The action alleges the improper production, handling and disposal of radioactive and other hazardous substances, constituting, among other things, violations of various environmental, health and safety laws and regulations, and misrepresentation and concealment of the facts relating thereto. On October 8, 1993, the court certified separate medical monitoring and property value classes. Effective August 1, 1996, the DOE assumed control of the defense of the contractor defendants, including RIC, in the action and has either reimbursed or paid directly the costs of RIC’s defense. On February 14, 2006, a jury empanelled to try certain of the class action plaintiffs’ property damage claims found the contractor defendants liable for trespass and nuisance, and awarded $176 million in compensatory damages and $200 million in punitive damages against the two defendants. The jury also found RIC to be 10% responsible for the trespass and 70% responsible for the nuisance. On June 2, 2008, the district court entered judgment against RIC in the amount of $598 million, including prejudgment interest. RIC has appealed the judgment, at the direction of the DOE. Execution of the judgment is currently stayed. By letter dated June 5, 2008, the DOE confirmed its obligation to indemnify RIC for any judgment or settlement arising out of this action and attorney’s fees and other costs associated with this action. The DOE’s letter acknowledges that the ultimate financial responsibility for this action lies with the U.S. government. Accordingly, we do not believe that the action will have a material adverse effect on our financial condition.

In many countries we provide a limited intellectual property indemnity as part of our terms and conditions of sale. We also at times provide limited intellectual property indemnities in other contracts with third parties, such as contracts concerning: the development and manufacture of our products; the divestiture of businesses; and the licensing of intellectual property. Due to the number of agreements containing such provisions, we are unable to estimate the maximum potential future payments. However, we believe that future payments, if any, would not be material to our business or financial condition.

ROCKWELL AUTOMATION, INC.

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS

(Unaudited)

13.

Discontinued Operations

The following is a summary of the composition of income from discontinued operations included in the Condensed Consolidated Statement of Operations (in millions):


	Three Months Ended June 30,					Nine Months Ended June 30,
	2008		2007			2008		2007
Power Systems net income from operations	$	—	$	—		$	—	$	42.3
Gain on sale of Power Systems (net of tax expense of $194.4 million)		—		(0.7	)		—		866.5
Other		—		(2.6	)		—		8.3

(Loss) income from discontinued operations	$	—	$	(3.3	)	$	—	$	917.1

Power Systems

On January 31, 2007, we divested our Dodge mechanical and Reliance Electric motors and motor repair services businesses to Baldor. These businesses are reported as a discontinued operation in the Condensed Consolidated Financial Statements for all periods presented.

Summarized results of Power Systems net income from operations are (in millions):


	Nine Months Ended June 30, 2007
Sales	$	340.7

Income before income taxes		69.6
Income tax expense		(27.3	)

Net income	$	42.3

Other

During the nine months ended June 30, 2007, we recorded a change in estimate of a contingent liability related to a divested business, resulting in income of $9.0 million with no income tax effect. We also recorded a net charge of $1.2 million ($0.7 million after tax) related to resolutions of certain claims and professional service fees related to discontinued operations matters, offset by a benefit related to legal matters associated with the former RIC’s operation of the Rocky Flats facility for the DOE.

ROCKWELL AUTOMATION, INC.

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS

(Unaudited)

14.

Income Taxes

We adopted the provisions of FIN 48 as of October 1, 2007. As a result, we recognized a $6.7 million decrease in shareowners’ equity. As of October 1, 2007, the gross liability for unrecognized tax benefits recorded on adoption of FIN 48 and reported in other liabilities in the Condensed Consolidated Balance Sheet was $135.3 million. Of this amount, $83.7 million would reduce our effective tax rate if recognized.

We recognize interest and penalties related to unrecognized tax benefits in tax expense. As of October 1, 2007, accrued interest of $16.8 million and penalties of $2.0 million were included in the $135.3 million liability.

There was no material change in the amount of unrecognized tax benefits in the first nine months of 2008. We believe it is reasonably possible that the amount of unrecognized tax benefits related to the resolution of federal, state and foreign tax matters could be reduced by $5-10 million during the next 12 months as audits close and statutes expire.

We conduct business globally and are routinely audited by the various tax jurisdictions in which we operate. Our U.S. federal tax returns for 2006 and 2007, Wisconsin tax returns for 2003 through 2007, and tax returns for other major states and foreign jurisdictions for 1998 through 2007 remain subject to examination by taxing authorities.

The base tax rate determined as provided under Income Taxes in Note 1 for the full year is estimated to be in a range of 28 to 29 percent, subject to quarterly variability, based on our current forecast of pretax income, permanent book and tax differences and global tax planning strategies for our continuing operations. The effective tax rate for the third quarter of 2008 was 28.5 percent.

The tax rate applied to our discontinued operations for the nine months ended June 30, 2007 was approximately 39 percent. This rate reflects that most of the taxable income from discontinued operations is generated in higher tax jurisdictions. The income tax benefit of $264.0 million recognized in the first quarter of 2007 represents recognition of a deferred tax asset on the difference between our tax basis in the stock of the Power Systems subsidiaries that were sold and the book value of their net assets as well as the reversal of the deferred tax liabilities that will not be realized due to the stock sale. In accordance with the FASB Emerging Issues Task Force Issue 93-17, Recognition of Deferred Tax Assets for a Parent Company’s Excess Tax Basis in the Stock of a Subsidiary that Is Accounted for as a Discontinued Operation , the tax benefit is recognized upon classification of the subsidiaries as a discontinued operation, which occurred in our first quarter of 2007.

ROCKWELL AUTOMATION, INC.

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS

(Unaudited)

15.

Special Charges

During the second quarter of 2007, we recorded special charges of $43.5 million ($27.7 million after tax or $0.17 per diluted share) related to various restructuring actions designed to execute on our cost productivity initiatives and to advance our globalization strategy. Actions include workforce reductions, realignment of administrative functions, and rationalization and consolidation of global operations. We paid $12.8 million related to these charges during the nine months ended June 30, 2008.

16.

Segment Information

The following tables reflect the sales and operating results of our reportable segments (in millions):


	Three Months Ended June 30,						Nine Months Ended June 30,
	2008			2007			2008			2007
Sales
Architecture & Software	$	625.7		$	582.5		$	1,802.6		$	1,651.8
Control Products & Solutions		849.3			698.1			2,410.9			1,981.6

Total	$	1,475.0		$	1,280.6		$	4,213.5		$	3,633.4

Segment Operating Earnings
Architecture & Software	$	154.7		$	164.7		$	443.1		$	442.4
Control Products & Solutions		103.6			97.6			313.0			267.1


Total		258.3			262.3			756.1			709.5
Purchase accounting depreciation and amortization		(6.3	)		(3.8	)		(19.1	)		(9.5	)
General corporate – net		(21.9	)		(17.6	)		(52.7	)		(50.6	)
Special charges		—			—			—			(43.5	)
Interest expense		(16.6	)		(13.8	)		(52.1	)		(48.5	)
Income tax provision		(60.9	)		(59.6	)		(180.2	)		(151.9	)

Income from continuing operations	$	152.6		$	167.5		$	452.0		$	405.5

Among other considerations, we evaluate performance and allocate resources based upon segment operating earnings before income taxes, interest expense, costs related to corporate offices, certain nonrecurring corporate initiatives, gains and losses from the disposition of businesses and incremental acquisition related expenses resulting from purchase accounting adjustments such as intangible asset amortization, depreciation, inventory and purchased research and development charges. Depending on the product, intersegment sales that are within a single legal entity are either at cost or cost plus a mark-up, which does not necessarily represent a market price. Sales between legal entities are at an appropriate transfer price. We allocate costs related to shared segment operating activities to the segments using a methodology consistent with the expected benefit.

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the Board of Directors and Shareowners of

Rockwell Automation, Inc.

Milwaukee, Wisconsin:

We have reviewed the accompanying condensed consolidated balance sheet of Rockwell Automation, Inc. and subsidiaries (the “Company”) as of June 30, 2008, and the related condensed consolidated statements of operations for the three-month and nine-month periods ended June 30, 2008 and 2007, and cash flows for the nine-month periods ended June 30, 2008 and 2007. These condensed consolidated interim financial statements are the responsibility of the Company’s management.

We conducted our reviews in accordance with the standards of the Public Company Accounting Oversight Board (United States). A review of interim financial information consists principally of applying analytical procedures and making inquiries of persons responsible for financial and accounting matters. It is substantially less in scope than an audit conducted in accordance with the standards of the Public Company Accounting Oversight Board (United States), the objective of which is the expression of an opinion regarding the financial statements taken as a whole. Accordingly, we do not express such an opinion.

Based on our reviews, we are not aware of any material modifications that should be made to such condensed consolidated interim financial statements for them to be in conformity with accounting principles generally accepted in the United States of America.

We have previously audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the consolidated balance sheet of Rockwell Automation, Inc. and subsidiaries as of September 30, 2007, and the related consolidated statements of operations, shareowners’ equity, cash flows and comprehensive equity for the year then ended (not presented herein); and in our report dated November 15, 2007, we expressed an unqualified opinion on those consolidated financial statements, and such report expresses an unqualified opinion and includes an explanatory paragraph relating to the adoption of Statement of Financial Accounting Standard No. 123R, Share Based Payments on October 1, 2005, FASB Interpretation No. 47, Accounting for Conditional Asset Retirement Obligations on September 30, 2006 and Financial Accounting Standard No. 158, Employers’ Accounting for Defined Benefit Pension and Other Postretirement Plans – An Amendment of FASB Statements No. 87, 88, 106, and 132R on September 30, 2007. In our opinion, the information set forth in the accompanying condensed consolidated balance sheet as of September 30, 2007 is fairly stated, in all material respects, in relation to the consolidated balance sheet from which it has been derived.

As described in Note 14 to the Condensed Consolidated Financial Statements, on October 1, 2007, the Company adopted Financial Accounting Standards Board Interpretation No. 48, Accounting for Uncertainty in Income Taxes.

/s/ DELOITTE & TOUCHE LLP

Milwaukee, Wisconsin

July 29, 2008

ROCKWELL AUTOMATION, INC.

Item 2.

Management’s Discussion and Analysis of Financial Condition and Results of Operations.

Results of Operations

Forward-Looking Statement

This Quarterly Report contains statements (including certain projections and business trends) that are “forward-looking statements” as defined in the Private Securities Litigation Reform Act of 1995. Words such as “believe”, “estimate”, “expect”, “project”, “plan”, “anticipate”, “will”, “intend” and other similar expressions may identify forward-looking statements. Actual results may differ materially from those projected as a result of certain risks and uncertainties, many of which are beyond our control, including but not limited to:

•

economic and political changes in global markets where we compete, such as currency exchange rates, inflation rates, interest rates, recession, policies of foreign governments and other external factors we cannot control, and U.S. and local laws affecting our activities abroad and compliance therewith;

•

successful development of advanced technologies and demand for and market acceptance of new and existing products;

•

general global and regional economic, business or industry conditions, including levels of capital spending in industrial markets;

•

the availability, effectiveness and security of our information technology systems;

•

competitive product and pricing pressures;

•

disruption of our operations due to natural disasters, acts of war, strikes, terrorism, or other causes;

•

intellectual property infringement claims by others and the ability to protect our intellectual property;

•

our ability to successfully address claims by taxing authorities in the various jurisdictions where we do business;

•

our ability to attract and retain qualified personnel;

•

the uncertainties of litigation;

•

disruption of our North American distribution channel;

•

the availability and price of components and materials;

•

successful execution of our cost productivity and globalization initiatives;

•

our ability to execute strategic actions, including acquisitions and integration of acquired businesses; and

•

other risks and uncertainties, including but not limited to those detailed from time to time in our Securities and Exchange Commission filings.

These forward-looking statements reflect our beliefs as of the date of filing this report. We undertake no obligation to update or revise any forward-looking statement, whether as a result of new information, future events or otherwise.

Non-GAAP Measures

The following discussion includes organic sales and free cash flow, which are non-GAAP measures. See Supplemental Sales Information for a reconciliation of reported sales to organic sales and a discussion of why we believe this non-GAAP measure is useful to investors. See Financial Condition for a reconciliation of cash flows from operating activities to free cash flow and a discussion of why we believe this non-GAAP measure is useful to investors.

ROCKWELL AUTOMATION, INC.

Overview

We are a leading global provider of industrial automation power, control and information solutions that help manufacturers achieve a competitive advantage in their businesses. Overall demand for our products is driven by:

•

investments in manufacturing capacity, including upgrades, modifications, and expansions of existing manufacturing facilities, and the creation of new manufacturing facilities;

•

our customers’ needs for greater productivity, sustainable production (cleaner, safer and more energy efficient), cost reduction, quality, and overall global competitiveness;

•

industry factors that include our customers’ new product introductions, trends in the actual and forecasted demand for our customers’ products or services, and the regulatory and competitive environments in which our customers operate;

•

levels of global industrial production;

•

regional factors that include local political, social, regulatory and economic circumstances; and

•

the seasonal capital spending patterns of our customers due to their annual capital budgeting processes and their working schedules.

Key Objectives

The following is a summary of our key objectives for 2008:

•

continue to grow profitably and diversify our business, by aggressively pursuing growth in an expanded addressable market and enhancing our market access both organically and through synergistic acquisitions;

•

execute our cost productivity initiatives;

•

expand our global business footprint with a focus on production efficiencies and enhanced customer experience;

•

continue to implement our ERP system across the globe with minimal disruption to our business and customers; and

•

sustain the growth of our integrated control and information architecture by accelerating the proliferation and adoption rate and enhancing features and functionality.

Long-term Strategy

Our long-term growth and performance strategy is characterized by the careful balance of sustained organic growth and profitability. This strategy seeks to:

•

deploy human and financial resources in order to strengthen our technology leadership and allow us to capture a larger share of our customers’ spending;

•

enhance our market access by increasing our solutions and service capabilities, advancing our global presence and delivering our products and solutions to a wider range of targeted industries;

•

expand our served market by increasing our ability to meet our customers’ needs in the areas of process control, safety control and information software; and

•

foster a robust productivity culture.

We continue to transform our business model into one that is based less on tangible assets and more on intellectual capital. As we execute our long-term growth and performance strategy, we expect to provide value for our shareowners through revenue and earnings growth, free cash flow generation and superior returns.

ROCKWELL AUTOMATION, INC.

Technological Advancement and Domain Expertise

We seek to maintain a technology leadership position in all facets of plant-wide control. We believe our core technologies are the foundation for long-term sustainable growth at a multiple of global Gross Domestic Product (GDP) growth.

Our customers face increasingly complex and volatile customer demand patterns, which are driving the need for flexible manufacturing. Our investments in new technology and domain expertise have expanded our served market well beyond discrete control into process, safety and information. Our value proposition is to help our customers gain the benefits of faster time to market, lower total cost of ownership, better asset utilization and reduced business risks.

We believe that process automation is the largest growth opportunity for our company. Our Logix architecture enables us to compete effectively with traditional DCS control solutions for process applications.

We have one of the most comprehensive safety offerings in the industry and we see significant potential in the growing safety market. We successfully integrated safety into the Logix platform with our launch of GuardLogix ^® safety controllers. Our safety products are designed to bring a dual benefit to our customers: a safe environment for their employees and productivity in their operations.

Through internal investment and acquisitions, we have built our expanded capability in the area of plant-wide information. This opportunity involves software and solutions that link the plant floor to the enterprise business systems.

We augment our product portfolio with solutions and service excellence to achieve greater customer intimacy. The combination of our leading technologies, such as integrated architecture, with the industry-specific domain expertise of our people, enables us to deliver these solutions.

Global Expansion and Enhanced Market Access

As the manufacturing world continues to globalize, we must be capable of meeting our customers’ needs in emerging markets. We continue to add delivery resources and expand our sales force in emerging markets. We currently have greater than 50 percent of our employees outside the U.S., and achieved our goal of about 50 percent of our revenues outside of the U.S. in the first nine months of 2008.

As we enter markets with considerable growth potential and expand our global footprint, we will seek to continue to broaden the portfolio of products, services and solutions that we provide to our customers in these regions. We have made significant investments to globalize our manufacturing and customer facing resources in order to be closer to our customers throughout the world. We see growth opportunities in the Latin America region, especially in resource-based industries. We also continue to pursue attractive opportunities in fast growing countries of the Asia Pacific region.

Original Equipment Manufacturers (OEMs) represent another market opportunity for us. The large OEM market is under tremendous cost pressure and must reduce time to market to remain competitive as it introduces new products. OEMs benefit from our Logix technology combined with motion and safety products. We have a significant opportunity in the OEM market globally, especially in Europe, where OEMs are integral to our strategy.

ROCKWELL AUTOMATION, INC.

Industry Views

We apply our knowledge of manufacturing applications to help customers solve their business challenges. We serve customers in a wide range of industries, including consumer, resource-based and transportation.

Our consumer industry customers are engaged in the food and beverage, home and personal care, and life sciences industries. These customers’ needs include global expansion, incremental capacity from existing facilities, an increasingly flexible manufacturing environment and regulatory compliance. In addition, these customers operate in an environment where product innovation and time to market are critical factors. Consumer products customers’ capital investments generally provide for more consistent rates of growth over time.

Our customers in resource-based industries, including oil and gas, mining, aggregates, cement, metals, water/wastewater and forest products, all benefit from higher commodity prices and higher global demand for basic materials, both of which encourage investment in capacity and productivity in these industries. Higher energy prices have historically caused customers across all industries to invest in more energy-efficient manufacturing processes and technologies, such as intelligent motor controls.

In transportation, factors such as capacity utilization, geographic expansion, investment in new model introductions and more flexible manufacturing technologies are drivers of demand for our products, services and solutions.

Productivity

Productivity and continuous improvements are important components of our culture. We have programs in place that drive ongoing process improvement, functional streamlining, material cost savings and manufacturing productivity. These are designed to result in improved profitability that can be used to fund investment in growth and technology and to offset inflation and dilution from acquisitions. Our ongoing cost productivity initiatives include improved asset utilization and in some instances may require special charges for actions such as workforce reductions and facility rationalization.

Acquisitions

We recently acquired CEDES, Incuity, Pavilion and ICS Triplex. We believe the acquired companies will help us expand our market share and deliver value to our customers.

With our acquisition of CEDES, we have expanded our comprehensive machine safety solutions for our customers worldwide. CEDES is a supplier of safety and measuring light curtains, a leading product offering in the machine safety market.

Our acquisition of Incuity positions us for continued growth in the information solutions market. Incuity’s enterprise manufacturing intelligence offerings will enable us to accelerate specific aspects of our plant-wide information strategy and extend the capabilities of our integrated architecture.

We believe that Pavilion’s expertise in advanced process control, production optimization and environmental compliance solutions paired with our Logix architecture will help our customers create a more agile, efficient and productive environment. It will also benefit, in particular, our process growth initiative.

ICS Triplex is a leading global supplier in the critical control and safety market, which has allowed us to expand our presence in this market. The ICS Triplex acquisition is creating new customer opportunities, most significantly in the oil and gas industry. We are also benefiting from ICS Triplex’s strong presence in European and the Middle Eastern markets.

We continue to look for potential acquisitions that serve as catalysts to organic growth and add complementary technology, expand our served market, increase our domain expertise and/or continue our geographic diversification.

ROCKWELL AUTOMATION, INC.

U.S. Industrial Economic Trends

The various indicators we use to gauge the direction and momentum of our U.S. served markets include:

•

Industrial Equipment Spending, which is an economic statistic compiled by the Bureau of Economic Analysis (BEA). This statistic provides insight into spending trends in the broad U.S. industrial economy and is utilized, along with other economic indicators, to forecast industrial equipment spending. This measure over the longer term has proven to have reasonable predictive value as a directional indicator of our domestic growth.

•

Capacity Utilization (Total Industry), which is an indication of plant operating activity published by the Federal Reserve. Historically there has been a meaningful correlation between Capacity Utilization and the level of capital investment made by our U.S. customers in their manufacturing base.

•

The Manufacturing Purchasing Managers’ Index (PMI), published by the Institute for Supply Management (ISM), which is an indication of the current and near-term state of manufacturing activity in the U.S. According to the ISM, a PMI measure above 50 indicates that the U.S. manufacturing economy is generally expanding while a measure below 50 indicates that it is generally contracting.

The table below shows a sequential increase in the U.S. Industrial Equipment Spending from December 2007 to March 2008; this metric has also increased on a year over year basis compared to March 2007. Capacity utilization dropped just slightly below 80 in June 2008, but is still generally in line with recent quarters. In the month of June, the PMI rebounded above 50, which exceeds the 12-month average for the index.


	Industry Equipment Spending (in billions)		Capacity Utilization (percent)	PMI
Fiscal 2008
June 2008	$	^(A)	79.9	50.2
March 2008		178.8	80.5	48.6
December 2007		175.7	81.0	48.4

Fiscal 2007
September 2007		180.6	81.3	50.5
June 2007		176.0	81.0	53.4
March 2007		168.1	80.7	50.7
December 2006		167.5	80.9	51.5

Fiscal 2006
September 2006		169.2	80.9	51.9

^(A)	Economic indicator, as published by the U.S. Department of Commerce Bureau of Economic Analysis, not available at time of filing.

Note: Economic indicators are subject to revisions by the issuing organizations.

Non-U.S. Regional Trends

Outside the U.S., demand is principally driven by the strength of the industrial economy in each region and by our customers’ ability and propensity to invest in their manufacturing assets. These customers include both multinational companies with expanding global presence and indigenous companies. Recent strength in demand has, in part, been driven by investments in infrastructure in developing economies, and in basic materials production capacity in response to higher end-product pricing and in expanding consumer markets.

We use GDP growth rates as one indication of the growth opportunities in each region where we do business. Recent GDP growth rates in Asia Pacific have been robust, especially in China and India, but consensus forecasts currently call for a slowing in overall growth for the region. GDP growth rates in Latin America have slowed compared to one year ago, but remain relatively strong. The GDP growth rates in the United States and Europe, Middle East and Africa (EMEA) have been less favorable, in general exhibiting slower growth than prior year. Additionally, the GDP growth in Canada has continued to decline. Overall, we expect global GDP growth rates to moderate in all regions during the remainder of 2008; however, we still expect reasonably attractive GDP growth rates in the Asia Pacific and Latin America regions.

ROCKWELL AUTOMATION, INC.

Revenue by Geographic Region

In the third quarter of 2008, sales to non-U.S. customers accounted for approximately 50 percent of our total sales. The table below presents our sales for the quarter ended June 30, 2008 by geographic region and the change in sales from the quarter ended June 30, 2007 (in millions, except percentages):


	Three Months Ended June 30, 2008(1)		Change vs. Three Months Ended June 30, 2007	Change in Sales Excluding Effect of Currency vs. Three Months Ended June 30, 2007(2)	Change in Organic Sales vs. Three Months Ended June 30, 2007(2)
United States	$	731.7	5.8%	5.6%	3.7%
Canada		104.5	18.9%	9.0%	7.8%
Europe, Middle East and Africa		338.4	27.8%	12.7%	2.1%
Asia-Pacific		189.5	25.2%	20.0%	17.1%
Latin America		110.9	30.2%	18.5%	18.5%

Total Sales	$	1,475.0	15.2%	9.9%	6.2%

In the first nine months of 2008, sales to non-U.S. customers accounted for approximately 50 percent of our total sales. The table below presents our sales for the nine months ended June 30, 2008 by geographic region and the change in sales from the nine months ended June 30, 2007 (in millions, except percentages):


	Nine Months Ended June 30, 2008(1)		Change vs. Nine Months Ended June 30, 2007	Change in Sales Excluding Effect of Currency vs. Nine Months Ended June 30, 2007(2)	Change in Organic Sales vs. Nine Months Ended June 30, 2007(2)
United States	$	2,120.1	7.2%	6.8%	4.9%
Canada		296.6	21.2%	6.9%	5.7%
Europe, Middle East and Africa		980.8	28.7%	14.8%	3.6%
Asia-Pacific		518.4	23.2%	16.0%	13.7%
Latin America		297.6	30.0%	19.4%	19.4%

Total Sales	$	4,213.5	16.0%	10.4%	6.6%

(1)	We attribute sales to the geographic regions based upon country of destination.

(2)	Organic sales and sales excluding effect of currency are non-GAAP measures. See Supplemental Information for information on these non-GAAP measures.

ROCKWELL AUTOMATION, INC.

Summary of Results of Operations


	Three Months Ended June 30,						Nine Months Ended June 30,
	2008			2007			2008			2007
Sales
Architecture & Software	$	625.7		$	582.5		$	1,802.6		$	1,651.8
Control Products & Solutions		849.3			698.1			2,410.9			1,981.6

Total	$	1,475.0		$	1,280.6		$	4,213.5		$	3,633.4

Segment Operating Earnings
Architecture & Software	$	154.7		$	164.7		$	443.1		$	442.4
Control Products & Solutions		103.6			97.6			313.0			267.1
Purchase accounting depreciation and amortization		(6.3	)		(3.8	)		(19.1	)		(9.5	)
General corporate – net		(21.9	)		(17.6	)		(52.7	)		(50.6	)
Special charges		—			—			—			(43.5	)
Interest expense		(16.6	)		(13.8	)		(52.1	)		(48.5	)
Income tax provision		(60.9	)		(59.6	)		(180.2	)		(151.9	)


Income from continuing operations		152.6			167.5			452.0			405.5
Discontinued operations		—			(3.3	)		—			917.1

Net income	$	152.6		$	164.2		$	452.0		$	1,322.6

Diluted earnings per share:
Continuing operations	$	1.03		$	1.07		$	3.03		$	2.47
Discontinued operations		—			(0.02	)		—			5.60

Net income	$	1.03		$	1.05		$	3.03		$	8.07

Diluted weighted average outstanding shares		148.1			156.5			149.3			163.9

See Note 16 in the Condensed Consolidated Financial Statements for the definition of segment operating earnings.

ROCKWELL AUTOMATION, INC.

2008 Third Quarter Compared to 2007 Third Quarter


(in millions, except per share amounts)	2008		2007		Change
Sales	$	1,475.0	$	1,280.6	$	194.4
Income from continuing operations		152.6		167.5		(14.9	)
Diluted earnings per share from continuing operations		1.03		1.07		(0.04	)

Sales

Sales increased 15 percent compared to the third quarter of 2007. Organic sales increased 6 percent, as the effects of currency and acquisitions contributed 5 percent and 4 percent to the growth rate, respectively. Approximately 50 percent of our sales during the quarter were to non-U.S. customers. Above average growth in emerging markets was partially offset by sluggish growth in developed countries, particularly in the U.S. and Europe, due to difficult macro-economic conditions. Performance improved in the Asia-Pacific region with organic growth of 17 percent during the third quarter of 2008 compared to the third quarter of the prior year, with particular strength in China and India. We continued to see strong organic growth rates in Latin America of 19 percent, benefiting from strength in resource-based industries. Organic growth in Canada was 8 percent, primarily driven by a large project to a customer in the Alberta Oil Sands region. Organic sales in the U.S. and the EMEA region grew 4 percent and 2 percent, respectively, with weakening macro-economic conditions.

We continued to see above average growth in resource-based industries, particularly oil and gas, primarily due to higher commodity pricing, emerging market economic expansion and infrastructure spending. We also experienced revenue growth in our process initiative. Our sales growth in the consumer industries, including automotive and life sciences, has been less robust, due to customer project delays and reduced maintenance and repair order (MRO) spending.

Purchase Accounting Depreciation and Amortization

Purchase accounting depreciation and amortization was $6.3 million in the third quarter of 2008 compared to $3.8 million in the third quarter of 2007. The increase was due to amortization of intangibles acquired in recent acquisitions, particularly CEDES, Incuity, Pavilion and ICS Triplex.

General Corporate-Net

General corporate expenses were $21.9 million in the third quarter of 2008 compared to $17.6 million in the third quarter of 2007. The increase was primarily due to lower interest income during the quarter ended June 30, 2008 as compared to the same quarter in 2007.

ROCKWELL AUTOMATION, INC.

2008 Third Quarter Compared to 2007 Third Quarter — (Continued)

Interest Expense

Interest expense was $16.6 million in the third quarter of 2008 compared to $13.8 million in the third quarter of 2007. The increase was due to higher average outstanding debt balances, partially offset by lower interest rates than the prior year.

Income Taxes

The effective tax rate for the third quarter of 2008 was 28.5 percent compared to 26.2 percent in the third quarter of 2007. The effective tax rate was lower than the U.S. statutory tax rate of 35 percent due to lower non-U.S. tax rates and the utilization of foreign tax credits. The tax rate in the third quarter of 2008 was higher than the third quarter of 2007 due to the resolution of various federal and state matters in the prior year.

Income from Continuing Operations

Income from continuing operations decreased 9 percent to $152.6 million in the third quarter of 2008 compared to the third quarter of 2007. This decrease was primarily due to increased investment spending to support technology and growth, lower interest income, higher interest expense, higher purchase accounting depreciation and amortization and a higher income tax rate.

Discontinued Operations

The $3.3 million expense reported in discontinued operations in the third quarter of 2007 relates to certain legal matters associated with the former RIC’s operation of the Rocky Flats facility for the DOE and a working capital adjustment associated with the sales price for the principal businesses of our former Power Systems operating segment. See also Note 13 in the Condensed Consolidated Financial Statements for additional information on discontinued operations.

Architecture & Software


(in millions, except percentages)	2008		2007		Change
Sales	$	625.7	$	582.5	$	43.2
Segment operating earnings		154.7		164.7		(10.0)
Segment operating margin		24.7%		28.3%		(3.6) pts

Sales

Architecture & Software sales increased 7 percent in the third quarter of 2008 compared to the third quarter of 2007. Organic sales increased 1 percent, as the effects of currency and acquisitions contributed 5 percent and 1 percent, respectively, to the growth rate. Logix sales grew 10 percent in the third quarter of 2008 compared to the third quarter of 2007, with the highest rates of growth in the Latin America and Asia-Pacific regions. Logix growth was partially offset by a decline in our legacy processor product offerings.

Operating Margin

Operating margin decreased 3.6 points to 24.7 percent compared to the same period in the prior year. Margins were negatively impacted by the combination of increased investment spending to support technology and growth, low organic growth and the year over year impact of acquisitions.

ROCKWELL AUTOMATION, INC.

2008 Third Quarter Compared to 2007 Third Quarter – (Continued)

Control Products & Solutions


(in millions, except percentages)	2008		2007		Change
Sales	$	849.3	$	698.1	$	151.2
Segment operating earnings		103.6		97.6		6.0
Segment operating margin		12.2%		14.0%		(1.8) pts

Sales

Control Products & Solutions sales increased 22 percent in the third quarter of 2008 compared to the third quarter of 2007. Organic sales increased 11 percent, while the effects of currency and acquisitions contributed 5 percent and 6 percent to the growth rate, respectively. Year over year results benefited from strength in our solutions businesses.

Operating Margin

Operating margin decreased 1.8 points year over year to 12.2 percent primarily due to mix between our product and solutions businesses, the impact of foreign currency and increased investment spending.

Nine Months Ended June 30, 2008 Compared to Nine Months Ended June 30, 2007


(in millions, except per share amounts)	2008		2007		Change
Sales	$	4,213.5	$	3,633.4	$	580.1
Income from continuing operations		452.0		405.5		46.5
Diluted earnings per share from continuing operations		3.03		2.47		0.56

Sales

Sales increased 16 percent compared to the first nine months of 2007. Organic sales increased 7 percent, with effects of currency and acquisitions adding 5 and 4 percentage points to the growth rate, respectively. Approximately 50 percent of our sales during the nine months ended June 30, 2008 were to non-U.S. customers. Above average growth in emerging markets was partially offset by lower growth in developed countries. We demonstrated improved performance in the Asia-Pacific region, with particular strength in China and India. Asia-Pacific organic sales grew 14 percent during the first nine months of 2008 compared to the first nine months of the prior year; the growth rate in Asia-Pacific has accelerated every quarter during 2008. We continued to see strong organic growth in Latin America of 19 percent, benefiting from strength in resource-based industries. The organic growth rates in the United States and Canada were 5 percent and 6 percent, respectively. EMEA exhibited an organic growth rate of 4 percent.

In the nine months ended June 30, 2008, we achieved above average growth in resource-based industries, primarily due to higher commodity pricing, emerging market economic expansion, infrastructure spending and continued demand for oil, gas and other resources in emerging markets. Our sales growth in the consumer industries, including automotive and life sciences, has been less robust. During the third quarter of 2008, we experienced customer project delays and reduced MRO spending from some of our customers in these industries, driven by economic conditions in the U.S. and Europe. Our sales growth in the food and beverage and home and personal care industries was below our average growth rate; however, these industries tend to provide for more consistent rates of growth over time. We experienced revenue growth in our key process and OEM growth initiatives.

ROCKWELL AUTOMATION, INC.

Nine Months Ended June 30, 2008 Compared to Nine Months Ended June 30, 2007 — (Continued)

Purchase Accounting Depreciation and Amortization

Purchase accounting depreciation and amortization increased $9.6 million from $9.5 million in the first nine months of 2007 to $19.1 million in the first nine months of 2008. The increase was due to the amortization of intangibles acquired through our recent acquisitions of CEDES, Incuity, Pavilion, ICS Triplex and ProsCon.

General Corporate - Net

General corporate expenses were $52.7 million in the first nine months of 2008 compared to $50.6 million in 2007. The increase was primarily due to lower interest and dividend income in 2008 compared to 2007, offset by a gain on the sale in 2008 of the remaining shares of Baldor Electric Company (Baldor) that we received from the divestiture of the principal businesses of our former Power Systems operating segment and environmental charges taken in the second quarter of 2007.

Special Charges

For the first nine months of 2007, special charges of $43.5 million included costs related to various restructuring actions designed to execute on our cost productivity initiatives and to advance our globalization strategy. Actions included workforce reductions, realignment of administrative functions, and rationalization and consolidation of global operations. Total cash expenditures in connection with these actions are expected to approximate $39.0 million. Non-cash special charges included write-downs of certain inventory, machinery and equipment totaling $4.5 million.

Interest Expense

Interest expense was $52.1 million in the first nine months of 2008 compared to $48.5 million in the first nine months of 2007. The increase was due to higher average outstanding borrowings, partially offset by lower interest rates than the prior year.

Income Taxes

The effective tax rate for the first nine months of 2008 was 28.5 percent compared to 27.3 percent in the first nine months of 2007. The effective tax rate in 2008 was lower than the statutory tax rate of 35 percent due to lower non-U.S. tax rates and the utilization of foreign tax credits. The tax rate in 2008 was higher than 2007 due to the non-recurring tax benefits associated with special charges and the resolution of various federal and state matters in the prior year.

Income from Continuing Operations

Income from continuing operations increased 11 percent to $452.0 million, compared to the first nine months of 2007. The increase was primarily due to the special charges taken in the second quarter of 2007, strong productivity performance, higher volume, the sale of the remaining Baldor shares and pricing, partially offset by increased investment spending to support growth and technology, increased purchase accounting depreciation and amortization, inflation and a higher effective income tax rate.

Discontinued Operations

Total amounts reported for discontinued operations primarily relate to the results of our former Power Systems operating segment and the gain on sale of the principal businesses of that operating segment. Net income on operating activities of Power Systems was $42.3 million in the first nine months of 2007. We reported an after-tax gain on the sale of Power Systems of $866.5 million ($5.29 per share) for the nine months ended June 30, 2007.

We also reported after-tax income of $8.3 million during the first nine months of 2007 related to other discontinued operations activities. See also Note 13 and Note 14 in the Condensed Consolidated Financial Statements for additional information on discontinued operations.

ROCKWELL AUTOMATION, INC.

Nine Months Ended June 30, 2008 Compared to Nine Months Ended June 30, 2007 — (Continued)

Architecture & Software


(in millions, except percentages)	2008		2007		Change
Sales	$	1,802.6	$	1,651.8	$	150.8
Segment operating earnings		443.1		442.4		0.7
Segment operating margin		24.6%		26.8%		(2.2) pts

Sales

Architecture & Software sales increased 9 percent in the first nine months of 2008 compared to the first nine months of 2007. Organic sales increased 2 percent, with the effects of currency and acquisitions contributing 6 percent and 1 percent, respectively, to the growth rate. Logix sales grew 11 percent in the first nine months of 2008 compared to the first nine months of 2007, partially offset by a decline in our legacy processor product offerings.

Operating Margin

Architecture & Software segment operating margin decreased 2.2 points to 24.6 percent compared to the same period in the prior year, and was negatively impacted by increased investment spending to support technology and growth, year over year impact of acquisitions, the impact of foreign currency and inflation, partially offset by volume leverage and productivity.

Control Products & Solutions


(in millions, except percentages)	2008		2007		Change
Sales	$	2,410.9	$	1,981.6	$	429.3
Segment operating earnings		313.0		267.1		45.9
Segment operating margin		13.0%		13.5%		(0.5) pts

Sales

Control Products & Solutions sales increased 22 percent in the first nine months of 2008 compared to the first nine months of 2007. Organic sales increased 10 percent, while the effects of currency and acquisitions each added 6 percentage points to the growth rate. Year over year results benefited from the execution of our growth initiatives and strong results from our solutions businesses, especially in resource-based end markets related to high commodity prices and infrastructure spending.

Operating Margin

Control Products & Solutions segment operating margin declined by 0.5 points to 13.0 percent. The decrease was primarily due to the mix between our product and solutions businesses, the impact of foreign currency, increased investment spending and the negative impact of acquisitions, partially offset by strong productivity performance, volume leverage and price.

ROCKWELL AUTOMATION, INC.

Financial Condition

The following is a summary of our cash flows from operating, investing and financing activities, as reflected in the Condensed Consolidated Statement of Cash Flows (in millions):


	Nine Months Ended
	June 30,
	2008			2007
Cash provided by (used for):
Operating activities	$	352.3		$	264.2
Investing activities		(174.9	)		1,614.7
Financing activities		(36.4	)		(1,501.8	)
Effect of exchange rate changes on cash		46.8			18.3

Cash provided by continuing operations	$	187.8		$	395.4

The following table summarizes free cash flow (in millions):
Cash provided by continuing operating activities	$	352.3		$	264.2
Capital expenditures of continuing operations		(102.8	)		(82.1	)
Tax payments related to gain on divestiture of Power Systems		7.7			142.2
Excess income tax benefit from the exercise of stock options		3.9			21.4

Free cash flow	$	261.1		$	345.7

Our definition of free cash flow, which is a non-GAAP financial measure, takes into consideration capital investments required to maintain the operations of our businesses and execute our strategy. We account for share-based compensation under SFAS 123(R), Share-Based Payment , which requires that we report the excess income tax benefit from the exercise of stock options as a financing cash flow rather than as an operating cash flow. We have added this benefit back to our calculation of free cash flow in order to generally classify cash flows arising from income taxes as operating cash flows. In our opinion, free cash flow provides useful information to investors regarding our ability to generate cash from business operations that is available for acquisitions and other investments, service of debt principal, dividends and share repurchases. We use free cash flow, as defined, as one measure to monitor and evaluate performance. Our definition of free cash flow may be different from definitions used by other companies.

Our definition of free cash flow excludes the operating cash flows and capital expenditures related to our discontinued operations. Operating, investing and financing cash flows of our discontinued operations are presented separately in our statement of cash flows. Cash flows from the operating activities of our discontinued operations are reported in our statement of cash flows net of their separately calculated income tax effects. U.S. federal and state income taxes paid as a result of the gain on sale of the principal businesses of our former Power Systems operating segment have been classified within continuing operations consistent with the cash proceeds. These taxes paid in the nine months ended June 30, 2008 and 2007 have been excluded from free cash flow to present free cash flow that is representative of the performance of our continuing businesses.

Free cash flow was a source of $261.1 million for the nine months ended June 30, 2008 compared to a source of $345.7 million for the nine months ended June 30, 2007. This decrease in free cash flow was due to increased working capital needs and higher capital expenditures, partially offset by higher net income.

Commercial paper is our principal source of short-term financing. Commercial paper borrowings outstanding at June 30, 2008 were at $334.0 million, with a weighted average interest rate of 2.3 percent. At September 30, 2007, commercial paper borrowings outstanding were $173.0 million, with a weighted average interest rate of 5.1 percent.

In January 2007, we received $1.75 billion of cash proceeds from the sale of our Dodge mechanical and Reliance Electric motors and motor repair services businesses. We used a portion of the cash proceeds to repay commercial paper borrowings of $675.1 million outstanding at January 31, 2007, which we incurred upon the repurchase of shares of our common stock to offset the dilutive effect of the divestiture, and to pay taxes on the gain on sale. We invested the remaining cash proceeds on hand at June 30, 2007 in cash equivalents, including commercial paper.

ROCKWELL AUTOMATION, INC.

Financial Condition—(Continued)

We repurchased approximately 4.3 million shares of our common stock in the first nine months of 2008. The total cost of these shares was $251.7 million, of which 740,000 shares did not settle until July 2008. This is compared to purchases of approximately 20.1 million shares at a cost of $1,248.3 million in the first nine months of 2007, of which 75,000 shares did not settle until July 2007. We anticipate continuing to repurchase stock in 2008, the amount of which will depend ultimately on business conditions, stock price, free cash flow generation and other cash requirements. At June 30, 2008, we had approximately $774.6 million remaining for stock repurchases under our existing board authorization. See Part II, Item 2, Unregistered Sales of Equity Securities and Use of Proceeds, for additional information regarding share repurchases.

We expect future uses of cash to include repayments of short-term borrowings, repurchases of common stock, dividends to shareowners, capital expenditures and acquisitions of businesses and may include additional contributions to our pension plans. We expect capital expenditures from continuing operations in 2008 to be about $145 million. We expect to fund these future uses of cash with existing cash balances, cash generated by operating activities, commercial paper borrowings, a new issue of debt or issuance of other securities.

In addition to cash generated by operating activities, we have access to existing financing sources, including the public debt markets and unsecured credit facilities with various banks. Our debt-to-total-capital ratio was 39.5 percent at June 30, 2008 and 34.7 percent at September 30, 2007.

In October 2004, we entered into a five-year $600.0 million unsecured revolving credit facility. Our credit facility remains in effect and we had not drawn down under it at June 30, 2008 or September 30, 2007. Borrowings under our credit facility bear interest based on short-term money market rates in effect during the period the borrowings are outstanding. The terms of our credit facility contain covenants under which we would be in default if our debt-to-total-capital ratio was to exceed 60 percent. We were in compliance with all covenants under our credit facility at June 30, 2008 and September 30, 2007. In addition to our $600.0 million credit facility, short-term unsecured credit facilities of approximately $196.2 million at June 30, 2008 were available to foreign subsidiaries.

The following is a summary of our credit ratings as of June 30, 2008:


	Short Term	Long Term
Credit Rating Agency	Rating	Rating	Outlook
Standard & Poor’s	A-1	A	Stable
Moody’s	P-1	A2	Stable
Fitch Ratings	F1	A	Stable

Among other uses, we can draw on our credit facility as a standby liquidity facility to repay our outstanding commercial paper as it matures. This access to funds to repay maturing commercial paper is an important factor in maintaining the ratings set forth in the table above that have been given to our commercial paper. Under our current policy with respect to these ratings, we expect to limit our other borrowings under the credit facility, if any, to amounts that would leave enough credit available under the facility so that we could borrow, if needed, to repay all of our then outstanding commercial paper as it matures.

If our access to the commercial paper market is adversely affected due to a change in market conditions or otherwise, we would expect to rely on a combination of available cash and the unsecured committed credit facility to provide short-term funding. In such event, the cost of borrowings under the unsecured committed credit facility could be higher than the cost of commercial paper borrowings.

Information with respect to our contractual cash obligations is contained in Item 7, Management’s Discussion and Analysis of Financial Condition and Results of Operations, of our Annual Report on Form 10-K for the fiscal year ended September 30, 2007. We believe that at June 30, 2008, there has been no material change to this information, except as follows: In December 2007, we issued an aggregate of $500 million principal amount of our 5.65% notes due 2017 and 6.25% debentures due 2037. The debt offering yielded approximately $493.5 million of proceeds, which were used to repay at maturity our 6.15% notes due January 15, 2008 and for general corporate purposes. Interest payable under the new debt will be $14.7 million in 2008, $29.8 million in 2009, $29.8 million in 2010, $29.8 million in 2011, $29.8 million in 2012 and $475.9 million thereafter. The Financial Accounting Standards Board (FASB) issued Interpretation No. 48, Accounting for Uncertainty in Income Taxes (FIN 48), which became effective for us on October 1, 2007. The total gross liability for unrecognized tax benefits recorded on adoption of FIN 48 was $135.3 million. We are unable to make a reasonably reliable estimate when these liabilities for unrecognized tax benefits will be settled or paid.

ROCKWELL AUTOMATION, INC.

Environmental

Information with respect to the effect on us and our manufacturing operations of compliance with environmental protection requirements and resolution of environmental claims is contained in Note 17 of the Consolidated Financial Statements in Item 8, Financial Statements and Supplementary Data, of our Annual Report on Form 10-K for the fiscal year ended September 30, 2007. We believe that at June 30, 2008, there has been no material change to this information.

Supplemental Sales Information

We translate sales of subsidiaries operating outside of the United States using exchange rates effective during the respective period. Therefore, changes in currency rates affect our reported sales. Sales by businesses we acquired also affect our reported sales. We believe that organic sales, defined as sales excluding the effects of changes in currency exchange rates and acquisitions, which is a non-GAAP financial measure, provides useful information to investors because it reflects regional performance from the activities of our businesses without the effect of changes in currency rates or acquisitions. We use organic sales as one measure to monitor and evaluate our regional performance. We determine the effect of changes in currency exchange rates by translating the respective period’s sales using the same currency exchange rates that were in effect in the prior year. We determine the effect of acquisitions by excluding sales in the current period for which there are no sales in the comparable prior period. Organic sales growth is calculated by comparing organic sales to reported sales in the prior year. We attribute sales to the geographic regions based on the country of destination.

The following is a reconciliation of our reported sales to organic sales (in millions):


	Three Months Ended June 30, 2008												Three Months Ended June 30, 2007
	Sales		Effect of Changes in Currency			Sales Excluding Changes in Currency		Effect of Acquisitions			Organic Sales		Sales
United States	$	731.7	$	(1.5	)	$	730.2	$	(13.3	)	$	716.9	$	691.5
Canada		104.5		(8.7	)		95.8		(1.0	)		94.8		87.9
Europe, Middle East and Africa		338.4		(40.1	)		298.3		(28.1	)		270.2		264.7
Asia-Pacific		189.5		(8.0	)		181.5		(4.4	)		177.1		151.3
Latin America		110.9		(9.9	)		101.0		—			101.0		85.2

Total Company Sales	$	1,475.0	$	(68.2	)	$	1,406.8	$	(46.8	)	$	1,360.0	$	1,280.6

ROCKWELL AUTOMATION, INC.

Supplemental Sales Information—(Continued)


	Nine Months Ended June 30, 2008												Nine Months Ended June 30, 2007
	Sales		Effect of Changes in Currency			Sales Excluding Changes in Currency		Effect of Acquisitions			Organic Sales		Sales
United States	$	2,120.1	$	(7.6	)	$	2,112.5	$	(38.9	)	$	2,073.6	$	1,977.1
Canada		296.6		(35.0	)		261.6		(2.9	)		258.7		244.7
Europe, Middle East and Africa		980.8		(106.3	)		874.5		(84.8	)		789.7		762.0
Asia-Pacific		518.4		(30.5	)		487.9		(9.4	)		478.5		420.7
Latin America		297.6		(24.3	)		273.3		—			273.3		228.9

Total Company Sales	$	4,213.5	$	(203.7	)	$	4,009.8	$	(136.0	)	$	3,873.8	$	3,633.4

The following is a reconciliation of our reported sales by operating segment to organic sales (in millions):


	Three Months Ended June 30, 2008												Three Months Ended June 30, 2007
	Sales		Effect of Changes in Currency			Sales Excluding Changes in Currency		Effect of Acquisitions			Organic Sales		Sales
Architecture & Software	$	625.7	$	(30.3	)	$	595.4	$	(8.8	)	$	586.6	$	582.5
Control Products & Solutions		849.3		(37.9	)		811.4		(38.0	)		773.4		698.1

Total Company Sales	$	1,475.0	$	(68.2	)	$	1,406.8	$	(46.8	)	$	1,360.0	$	1,280.6


	Nine Months Ended June 30, 2008												Nine Months Ended June 30, 2007
	Sales		Effect of Changes in Currency			Sales Excluding Changes in Currency		Effect of Acquisitions			Organic Sales		Sales
Architecture & Software	$	1,802.6	$	(91.0	)	$	1,711.6	$	(20.1	)	$	1,691.5	$	1,651.8
Control Products & Solutions		2,410.9		(112.7	)		2,298.2		(115.9	)		2,182.3		1,981.6

Total Company Sales	$	4,213.5	$	(203.7	)	$	4,009.8	$	(136.0	)	$	3,873.8	$	3,633.4

ROCKWELL AUTOMATION, INC.

Critical Accounting Policies and Estimates

We have prepared the Condensed Consolidated Financial Statements in accordance with accounting principles generally accepted in the United States, which require us to make estimates and assumptions that affect the reported amounts of assets and liabilities at the date of the Condensed Consolidated Financial Statements and revenues and expenses during the periods reported. Actual results could differ from those estimates. Information with respect to our critical accounting policies that we believe could have the most significant effect on our reported results or require subjective or complex judgments by management is contained in Item 7, Management’s Discussion and Analysis of Financial Condition and Results of Operations, of our Annual Report on Form 10-K for the fiscal year ended September 30, 2007. We believe that at June 30, 2008, there has been no material change to this information, except as follows:

Effective October 1, 2007, we adopted Financial Accounting Standards Board (FASB) Interpretation No. 48, Accounting for Uncertainty in Income Taxes (FIN 48). We have assessed our position with regard to tax exposures and uncertain tax positions under its requirements. The adoption of FIN 48 resulted in a decrease to shareowners’ equity of $6.7 million.

Recent Accounting Pronouncements

See Note 1 in the Condensed Consolidated Financial Statements regarding recent accounting pronouncements.

ROCKWELL AUTOMATION, INC.


Item 3.		*Quantitative and Qualitative Disclosures About Market Risk*

		Information with respect to our exposure to interest rate risk and foreign currency risk is contained in Item 7A, Quantitative and Qualitative Disclosures About Market Risk, of our Annual Report on Form 10-K for the fiscal year ended September 30, 2007. We believe that at June 30, 2008, there has been no material change to this information.

Item 4.		*Controls and Procedures*

		Disclosure Controls and Procedures: We, with the participation of our Chief Executive Officer and Chief Financial Officer, have evaluated the effectiveness of our disclosure controls and procedures (as such term is defined in Rules 13a-15(e) and 15d-15(e) under the Securities Exchange Act of 1934, as amended (Exchange Act)) as of the end of the fiscal quarter covered by this report. Based on that evaluation, our Chief Executive Officer and Chief Financial Officer have concluded that, as of the end of the fiscal quarter covered by this report, our disclosure controls and procedures were effective.

		Internal Control Over Financial Reporting: As previously disclosed, we are in the process of developing and implementing common global process standards and an enterprise-wide information technology system. During the third quarter of 2008, we deployed new business processes and functionality of the system to an additional location in Mexico. In doing so, we modified and enhanced our internal controls over financial reporting (as such term is defined in Exchange Act Rule 13a-15(f)) as a result of the implementation of the new processes and functionality. Additional deployments will occur at most locations of our company over a multi-year period, with additional phases scheduled throughout fiscal 2008-2012.

		There have not been any other changes in our internal control over financial reporting during the quarter ended June 30, 2008 that has materially affected, or is reasonably likely to materially affect, our internal control over financial reporting.

ROCKWELL AUTOMATION, INC.


PART II.		OTHER INFORMATION

Item 1.		*Legal Proceedings*

		Information about our legal proceedings is contained in Item 1, Legal Proceedings, of our Quarterly Report on Form 10-Q for the quarter ended December 31, 2007, as updated by the information contained in Item 1, Legal Proceedings, of our Quarterly Report on Form 10-Q for the quarter ended March 31, 2008. Such information is updated in its entirety as follows:

		*Rocky Flats Plant* . The former RIC operated the Rocky Flats Plant (the Plant), Golden, Colorado, from 1975 through December 1989 for the Department of Energy (DOE). Incident to Boeing’s acquisition of RIC in 1996, we agreed to indemnify RIC and Boeing for any liability arising out of RIC’s activities at the Plant to the extent such liability is not assumed or indemnified by the U.S. government.

		On January 30, 1990, a class action was filed in the United States District Court for the District of Colorado against RIC and another former operator of the Plant. The action alleges the improper production, handling and disposal of radioactive and other hazardous substances, constituting, among other things, violations of various environmental, health and safety laws and regulations, and misrepresentation and concealment of the facts relating thereto. On October 8, 1993, the court certified separate medical monitoring and property value classes. Effective August 1, 1996, the DOE assumed control of the defense of the contractor defendants, including RIC, in the action and has either reimbursed or paid directly the costs of RIC’s defense. On February 14, 2006, a jury empanelled to try certain of the class action plaintiffs’ property damage claims found the contractor defendants liable for trespass and nuisance, and awarded $176 million in compensatory damages and $200 million in punitive damages against the two defendants. The jury also found RIC to be 10% responsible for the trespass and 70% responsible for the nuisance. On June 2, 2008, the district court entered judgment against RIC in the amount of $598 million, including prejudgment interest. RIC has appealed the judgment, at the direction of the DOE. Execution of the judgment is currently stayed. By letter dated June 5, 2008, the DOE confirmed its obligation to indemnify RIC for any judgment or settlement arising out of this action and attorney’s fees and other costs associated with this action. The DOE’s letter acknowledges that the ultimate financial responsibility for this action lies with the U.S. government. Accordingly, we do not believe that the action will have a material adverse effect on our financial condition.

		On November 13, 1990, RIC was served with another civil action brought against it in the same court by James Stone, claiming to act in the name of the United States, alleging violations of the U.S. False Claims Act in connection with its operation of the Plant. On April 1, 1999 a jury awarded the plaintiffs approximately $1.4 million in damages. On May 18, 1999, the court entered judgment against RIC for approximately $4.2 million, trebling the jury’s award as required by the False Claims Act, and imposing a civil penalty of $15,000. We have paid this judgment to the U.S. government. One claim remains pending in the Stone action. We intend to move to dismiss that claim for lack of subject matter jurisdiction. We believe that RIC is entitled under applicable law and its contract with the DOE to be indemnified for all costs and any liability associated with this action. However, as described below, the Civilian Board of Contract Appeals has denied RIC’s claim seeking reimbursement of certain of those costs.

		On May 4, 2005, RIC filed a claim with the DOE, seeking recovery of $11.3 million in unreimbursed costs incurred in defense of the Stone suit. On September 30, 2005, the DOE Contracting Officer denied that claim and demanded repayment of $4 million in previously reimbursed Stone defense costs. On November 10, 2005, RIC appealed both aspects of the Contracting Officer’s decision regarding Stone defense costs to the Civilian Board of Contract Appeals (Board). On July 9, 2007, the Board ruled that the DOE is entitled to be repaid the previously reimbursed Stone defense costs and that RIC cannot recover its unreimbursed costs, to the extent that those costs were incurred defending the three false claims for which RIC was found liable. Further proceedings before the Board will determine whether RIC may recover or must repay to the DOE costs incurred in defending the false claims and common law claims for which RIC was found not liable. If the Board rules that RIC must reimburse the DOE, the amount will be determined in further proceedings.

ROCKWELL AUTOMATION, INC.


		*Asbestos.* We (including our subsidiaries) have been named as a defendant in lawsuits alleging personal injury as a result of exposure to asbestos that was used in certain components of our products many years ago. Currently there are thousands of claimants in lawsuits that name us as defendants, together with hundreds of other companies. In some cases, the claims involve products from divested businesses, and we are indemnified for most of the costs. However, we have agreed to defend and indemnify asbestos claims associated with products manufactured or sold by our Dodge mechanical and Reliance Electric motors and motor repair services businesses prior to their divestiture by us, which occurred on January 31, 2007. We also are responsible for half of the costs and liabilities associated with asbestos cases against RIC’s divested measurement and flow control business. But in all cases, for those claimants who do show that they worked with our products or products of divested businesses for which we are responsible, we nevertheless believe we have meritorious defenses, in substantial part due to the integrity of the products, the encapsulated nature of any asbestos-containing components, and the lack of any impairing medical condition on the part of many claimants. We defend those cases vigorously. Historically, we have been dismissed from the vast majority of these claims with no payment to claimants.

		We have maintained insurance coverage that we believe covers indemnity and defense costs, over and above self-insured retentions, for claims arising from our former Allen-Bradley subsidiary. Following litigation against Nationwide Indemnity Company and Kemper Insurance, the insurance carriers that provided liability insurance coverage to Allen-Bradley, we entered into separate agreements on April 1, 2008 with both insurance carriers to further resolve responsibility for ongoing and future coverage of Allen-Bradley asbestos claims. In exchange for a lump sum payment, Kemper bought out its remaining liability and has been released from further insurance obligations to Allen-Bradley. Nationwide will receive and administer the Kemper buyout funds and has entered into a cost share agreement to pay the substantial majority of future defense and indemnity costs for Allen-Bradley asbestos claims once the Kemper buyout funds are depleted. We believe that these arrangements will continue to provide coverage for Allen-Bradley asbestos claims throughout the remaining life of the asbestos liability.

		The uncertainties of asbestos claim litigation make it difficult to predict accurately the ultimate outcome of asbestos claims. That uncertainty is increased by the possibility of adverse rulings or new legislation affecting asbestos claim litigation or the settlement process. Subject to these uncertainties and based on our experience defending asbestos claims, we do not believe these lawsuits will have a material adverse effect on our financial condition.

		*Foreign Corrupt Practices Act* . As a result of an internal review, we determined during the fourth quarter of 2006 that actions by a small number of employees at certain of our operations in one jurisdiction may have violated the U.S. Foreign Corrupt Practices Act (FCPA) or other applicable laws. We and some of our distributors do business in this jurisdiction with government owned enterprises or government owned enterprises that are evolving to commercial businesses. These actions involved payments for non-business travel expenses and certain other business arrangements involving potentially improper payment mechanisms for legitimate business expenses. Special outside counsel has been engaged to investigate the actions and report to the Audit Committee. Their review is ongoing.

		We voluntarily disclosed these actions to the U.S. Department of Justice (DOJ) and the Securities and Exchange Commission (SEC) beginning in September 2006. We are implementing thorough remedial measures, and are cooperating on these issues with the DOJ and SEC. We have agreed to update the DOJ and SEC periodically regarding any further developments as the investigation continues.

		If violations of the FCPA occurred, we may be subject to consequences that could include fines, penalties, other costs and business-related impacts. We could also face similar consequences from local authorities. We do not believe the consequences of this investigation, the remediation or any related penalties or business related impacts will have a material adverse effect on our business, results of operations or financial condition.

		*Other.* Various other lawsuits, claims and proceedings have been or may be instituted or asserted against us relating to the conduct of our business, including those pertaining to product liability, environmental, safety and health, intellectual property, employment and contract matters. Although the outcome of litigation cannot be predicted with certainty and some lawsuits, claims or proceedings may be disposed of unfavorably to us, we believe the disposition of matters that are pending or have been asserted will not have a material adverse effect on our business or financial condition.

ROCKWELL AUTOMATION, INC.


Item 1A.		*Risk Factors*

		Information about our most significant risk factors is contained in Item 1A of our Annual Report on Form 10-K for the fiscal year ended September 30, 2007. We believe that at June 30, 2008 there has been no material change to this information.

Item 2.		*U nregistered Sales of Equity Securities and Use of Proceeds*

		Share Repurchases

		The table below sets forth information with respect to purchases made by or on behalf of us of shares of our common stock during the three months ended June 30, 2008:


Period	Total Number of Shares Purchased	Average Price Paid Per Share ⁽¹⁾		Total Number of Shares Purchased as Part of Publicly Announced Plans or Programs	Maximum Approx. Dollar Value of Shares that may yet be Purchased Under the Plans or Programs ⁽²⁾
April 1-30, 2008	—	$	—	—	$	832,059,023
May 1-31, 2008	145,500		55.37	145,500		824,003,195
June 1-30, 2008	1,055,600		46.75	1,055,600		774,649,766

Total	1,201,100		47.80	1,201,100

(1)	Average price paid per share includes brokerage commissions.

(2)

On November 7, 2007, our Board of Directors approved a $1.0 billion share repurchase program. Our repurchase program allows management to repurchase shares at its discretion. However, during quarter-end “quiet periods,” defined as the period of time from quarter-end until two days following the filing of our quarterly earnings results with the SEC on Form 8-K, shares are repurchased at our broker’s discretion pursuant to a share repurchase plan subject to price and volume parameters.

ROCKWELL AUTOMATION, INC.

Item 6.

Exhibits


(a) Exhibits:

Exhibit 10.1*	-	Form of Stock Option Agreement under the Company’s 2008 Long- Term Incentives Plan.

Exhibit 12	-	Computation of Ratio of Earnings to Fixed Charges for the Nine Months Ended June 30, 2008.

Exhibit 15	-	Letter of Deloitte & Touche LLP regarding Unaudited Financial Information.

Exhibit 31.1	-	Certification of Periodic Report by the Chief Executive Officer pursuant to Rule 13a-14(a) of the Securities Exchange Act of 1934.

Exhibit 31.2	-	Certification of Periodic Report by the Chief Financial Officer pursuant to Rule 13a-14(a) of the Securities Exchange Act of 1934.

Exhibit 32.1	-	Certification of Periodic Report by the Chief Executive Officer pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.

Exhibit 32.2	-	Certification of Periodic Report by the Chief Financial Officer pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.

*Management

contract or compensatory plan or arrangement.

ROCKWELL AUTOMATION, INC.

SIGNATURES

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.


		ROCKWELL AUTOMATION, INC.
		(Registrant)

Date:	July 29, 2008	By	/ S / T HEODORE D. C RANDALL
			Theodore D. Crandall Senior Vice President and Chief Financial Officer (Principal Financial Officer)

Date:	July 29, 2008	By	/ S / D AVID M. D ORGAN
			David M. Dorgan Vice President and Controller (Principal Accounting Officer)

ROCKWELL AUTOMATION, INC.

INDEX TO EXHIBITS


Exhibit No.		Exhibit
10.1		Form of Stock Option Agreement under the Company’s 2008 Long-Term Incentives Plan.

12		Computation of Ratio of Earnings to Fixed Charges for the Nine Months Ended June 30, 2008.

15		Letter of Deloitte & Touche LLP regarding Unaudited Financial Information.

31.1		Certification of Periodic Report by the Chief Executive Officer pursuant to Rule 13a-14(a) of the Securities Exchange Act of 1934.

31.2		Certification of Periodic Report by the Chief Financial Officer pursuant to Rule 13a-14(a) of the Securities Exchange Act of 1934.

32.1		Certification of Periodic Report by the Chief Executive Officer pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.

32.2		Certification of Periodic Report by the Chief Financial Officer pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.

Exhibit 10.1

[Form of option agreement for grants to non-corporate officers]

April , 2008

To:

We are pleased to notify you that you have been granted the following stock options (the “Options”) under the Rockwell Automation, Inc. 2008 Long-Term Incentives Plan (the “Plan”):


Date of Grant	Type of Grant	Number of Shares	Option Price
4/ /2008	NQ		$

The Options are granted under and may be exercised only upon the terms and conditions of this Stock Option Agreement, subject in all respects to the provisions of the Plan, as it may be amended. The enclosed Stock Option Terms and Conditions are incorporated in and are part of this Stock Option Agreement.

All option holders must activate an account with our stock option administrator, Charles Schwab, in order to exercise their stock options. There is no cost to open or maintain this account. If you already have a Schwab account, you need not open another. Please note that if you fail to activate an account with Schwab, you will experience unnecessary delays in the exercise of your options. You can find account information at http://scs.schwab.com/rockwell .

In partial consideration for the grant of the Options to you, you undertake and agree by your acceptance of this Stock Option Agreement that

(a)

during your employment with the Corporation or a Subsidiary (as such terms are defined in the Plan) and for two years after the date of your retirement or other termination of such employment, you shall not (i) directly or indirectly, except with the approval of the Corporation, engage or otherwise participate in any business that is competitive with any significant line of business of the Corporation or any of its Subsidiaries (otherwise than through ownership of not more than 5% of the voting securities of any such competitive business); or (ii) solicit or induce, or cause any other person or entity to solicit, any employee of the Corporation or any of its Subsidiaries to leave his or her employment with the Corporation or any of its Subsidiaries to accept employment or other engagement with any other person or entity; and

(b)

in the event that you breach this undertaking, in addition to any and all other remedies the Corporation may have, (i) the Corporation shall have the right to determine by written notice to you that any of the Options then outstanding shall immediately lapse and cease to be exercisable; and (ii) you agree to pay the Corporation upon written demand the amount of the excess of the Fair Market Value (as defined in the Plan) of any shares of Stock (as defined in the Plan) you acquired upon exercise of any of the Options (other than Options exercised more than two years before the date of your retirement or other termination of employment) over the exercise price for such Stock.

If a Change of Control (as defined in the Plan) shall occur, however, the foregoing provisions (a) and (b) shall immediately terminate as of, and shall not limit your activities after, the date of such Change of Control.

A copy of the Plan and the Plan Prospectus are provided. Please carefully read the enclosed documents and retain them for future reference.

The Options will lapse and be of no effect if a copy of this Stock Option Agreement, properly signed by you, is not received by the Corporate Compensation Department at the following address on or before May __, 2008 , unless Rockwell Automation (in its sole discretion) elects in writing to extend that date:

Rockwell Automation, Inc.

Mail Stop: W-8S28

Corporate Compensation

1201 South Second Street

Milwaukee, WI 53204


Agreed to:	ROCKWELL AUTOMATION, INC.
Date: _________________

	By:
Employee Signature		Douglas M. Hagerman
		Senior Vice President,
		General Counsel and Secretary

Enclosures

ROCKWELL AUTOMATION, INC.

2008 LONG-TERM INCENTIVES PLAN

STOCK OPTION TERMS AND CONDITIONS

(April , 2008)

1.	Definitions

As used in these Stock Option Terms and Conditions, the following words and phrases shall have the respective meanings ascribed to them below unless the context in which any of them is used clearly indicates a contrary meaning:

(a)

Change of Control : Change of Control shall have the same meaning as such term has in the Plan.

(b)

Charles Schwab : Charles Schwab & Co., Inc., the stock option administrator whom Rockwell Automation has engaged to administer and process all Option exercises.

(c)

Corporation: Rockwell Automation and its Subsidiaries (as such term is defined in the Plan).

(d)

Customer Service Center : Charles Schwab’s Customer Service Center that is used to facilitate Option transactions. Contact Charles Schwab at (800) 654-2593.

(e)

Exercise Request and Attestation Form : The form attached as Exhibit 1 or any other form accepted by Charles Schwab in connection with the use of already-owned shares to pay all or part of the exercise price for the Option Stock to be purchased on exercise of any of the Options.

(f)

Options : The stock option or stock options listed in the first paragraph of the Stock Option Agreement dated April __, 2008 to which these Stock Option Terms and Conditions are attached.

(g)

Option Stock : The Stock issuable or transferable on exercise of the Options.

(h)

Plan : Rockwell Automation’s 2008 Long-Term Incentives Plan, as such Plan may be amended and in effect at the relevant time.

(i)

Rockwell Automation : Rockwell Automation, Inc., a Delaware corporation, and any successor thereto.

(j)

Schwab Equity Award Center ^® : Charles Schwab’s stock option management website that you can use to access your stock option account and to facilitate stock option transactions securely on the Web at http://scs.schwab.com/rockwell .

(k)

Stock : Stock shall have the same meaning as such term has in the Plan.

(l)

Stock Option Agreement : These Stock Option Terms and Conditions together with the Stock Option Agreement dated April __, 2008 to which they are attached.

2.	When Options May be Exercised

The Options may be exercised, in whole or in part (but only for a whole number of shares) and at one time or from time to time, as to one-third (rounded to the nearest whole number) of the Option Stock during the period beginning on April , 2009 and ending on April , 2018, as to an additional one-third (rounded to the nearest whole number) of the Option Stock during the period beginning on April , 2010 and ending on April , 2018 and as to the balance of the Option Stock during the period beginning on April , 2011 and ending on April , 2018, and only during those periods, provided that :

(a)

if you die while an Employee (as defined in the Plan), your estate, or any person who acquires the Options by bequest or inheritance, may exercise all the Options not theretofore exercised within (and only within) the period beginning on your date of death (even if you die before you have become entitled to exercise all or any part of the Options) and ending three years thereafter; and

(b)

if your employment by the Corporation terminates other than by death, then:

(i)

if your retirement or other termination date is before April __, 2009, the Options shall lapse on your retirement or other termination and may not be exercised at any time;

(ii)

if your employment by the Corporation is terminated for cause, as determined by the Committee (as defined in the Plan), the Options shall expire immediately upon notification of your termination and may not be exercised thereafter;

(iii)

if your employment by the Corporation terminates on or after April __, 2009 by reason of your retirement under a retirement plan of Rockwell Automation, or under a retirement plan of a subsidiary or affiliate of Rockwell Automation, and if you immediately begin either to receive pension payments under any such retirement plan or to receive retiree medical benefits, you (or if you die after your retirement date, your estate or any person who acquires the Options by bequest or inheritance) may thereafter exercise the Options within (and only within) the period starting on the date you would otherwise have become entitled to exercise the part of the Options so exercised and ending on the fifth anniversary of your retirement date; or if you retire prior to age 62, the earlier of (x) the fifth anniversary of your retirement date or (y) such earlier date as the Committee shall determine by action taken not later than 60 days after your retirement date; and

(iv)

if your employment by the Corporation terminates on or after April __, 2009 for any reason not specified in subparagraph (a) or in clauses (ii) or (iii) of this subparagraph (b), you (or if you die after your termination date, your estate or any person who acquires the Options by bequest or inheritance) may thereafter exercise the Options within (and only within) the period ending three months after your termination date but only to the extent they were exercisable on your termination date.

For purposes of this Section 2, if you are placed on salary continuation status in connection with your separation from the Corporation, you will be treated as not having terminated your employment with the Corporation until the last date on which you receive salary continuation payments from the Corporation, at which time your employment by the Corporation will be deemed terminated.

In no event shall the provisions of the foregoing subparagraphs (a) and (b) extend to a date after April __, 2018 the period during which the Options may be exercised.

Notwithstanding any other provision of this Agreement, if a Change of Control shall occur, then all Options then outstanding pursuant to this Agreement shall forthwith become fully exercisable whether or not then otherwise exercisable in accordance with their terms.

3.	Exercise Procedure

(a)

To exercise all or any part of the Options, you (or after your death, your estate or any person who has acquired the Options by bequest or inheritance) must contact the stock option administrator, Charles Schwab, by using the Customer Service Center or Schwab Equity Award Center ^® as follows:

(i)

contact the Customer Service Center by calling (800) 654-2593, Monday through Friday 9 a.m. to 9 p.m., ET, or exercise via the Web through the Schwab Equity Award Center ^® at http://scs.schwab.com/rockwell ;

(ii)

confirm the Option transaction through the Customer Service Center or Schwab Equity Award Center ^® ;

(iii)

at any time you may speak to a Customer Service Representative for assistance by calling (800) 654-2593;

(iv)

full payment of the exercise price for the Option Stock to be purchased on exercise of the Options may be made:

•

by check (wire) to your Charles Schwab account; or

•

in already-owned Stock; or

•

in a combination of check (wire) to your Charles Schwab account and Stock; or

•

by authorizing Charles Schwab or a third party approved by Rockwell Automation to sell the Stock (or a sufficient portion of the Stock) acquired upon exercise of the Options; and

(v)

in the case of an exercise of the Options by any person other than you seeking to exercise the Options, such documents as Charles Schwab or the Secretary of Rockwell Automation shall require to establish to their satisfaction that the person seeking to exercise the Options is entitled to do so.

(b)

An exercise of the whole or any part of the Options shall be effective:

(i)

if you elect (or after your death, the person entitled to exercise the Options elects) to pay the exercise price for the Option Stock entirely by check (wire), upon (A) completion of your transaction by using the Customer Service Center or Schwab Equity Award Center ^® and full payment of the exercise price and withholding taxes (if applicable) are received by Charles Schwab within three (3) business days following the exercise; and (B) receipt of any documents required pursuant to Section 3(a)(v) herein; and

(ii)

if you elect (or after your death, the person entitled to exercise the Options elects) to pay the exercise price of the Option Stock in Stock or in a combination of Stock and check, upon (A) completion of your transaction by using the Customer Service Center or Schwab Equity Award Center ^® and full payment of the exercise price (as described in Section 3(d) herein) and withholding taxes (if applicable) are received by Charles Schwab within three (3) business days following the exercise; and (B) receipt of any documents required pursuant to Section 3(a)(v) herein.

(c)

If you choose (or after your death, the person entitled to exercise the Options chooses) to pay the exercise price for the Option Stock to be purchased on exercise of any of the Options entirely by check, payment must be made by:

•

delivering to Charles Schwab a check (wire) in the full amount of the exercise price for such Option Stock; or

•

arranging with a stockbroker, bank or other financial institution to deliver to Charles Schwab full payment, by check or (if prior arrangements are made with Charles Schwab) by wire transfer, of the exercise price of such Option Stock.

In either event, in accordance with Section 3(e) herein, full payment of the exercise price for the Option Stock purchased must be made within three (3) business days after the exercise has been completed through the Customer Service Center or Schwab Equity Award Center ^® .

(d) (i)

If you choose (or after your death, the person entitled to exercise the Options chooses) to use already-owned Stock to pay all or part of the exercise price for the Option Stock to be purchased on exercise of any of the Options, you (or after your death, the person entitled to exercise the Options) must deliver to Charles Schwab an Exercise Request and Attestation Form and cash representing one share, per grant exercised, to settle the rounding of the exercise costs. To perform such a stock swap transaction or a partial swap transaction, the Exercise Request and Attestation Form must be submitted via fax (720) 785-8884 by 4 PM ET on the date of exercise. Any questions concerning a stock swap transaction should be referred to (877) 636-7551 (Stock Option Administration Group Hotline). The Exercise Request and Attestation Form must attest to your ownership of Stock representing:

•

at least the number of shares of Stock whose value, based on their Fair Market Value (as defined in the Plan) on the day you have exercised your Options through the Customer Service Center or Schwab Equity Award Center ^® , equals the exercise price for the Option Stock; or

•

any lesser number of shares of Stock you desire (or after your death, the person entitled to exercise the Options desires) to use to pay the exercise price for such Option Stock and a check in the amount of such exercise price less the value of the Stock to which you are attesting, based on the Fair Market Value on the day you have exercised your Options through the Customer Service Center or Schwab Equity Award Center ^® .

(ii)

If you choose (or after your death, the person entitled to exercise the Options chooses) to use Stock acquired upon exercise of the Options to pay all or part of the exercise price for the remaining Option Stock to be purchased on exercise of any of the Options, you (or after your death, the person entitled to exercise the Options) must contact the Customer Service Center at (800) 654-2593.

(iii)

Charles Schwab will advise you (or any other person who, being entitled to do so, exercises the Options) of the exact number of shares of Stock, valued in accordance with Section 4(a)(ii) of the Plan at their Fair Market Value on the date of exercise, and any funds required to pay in full the exercise price for the Option Stock purchased. In accordance with Section 3(e) herein, you (or such other person) must pay, by check, in Stock or in a combination of check and Stock, any balance required to pay in full the exercise price of the Option Stock purchased within three (3) business days after the exercise has been completed through the Customer Service Center.

(iv)

Notwithstanding any other provision of this Stock Option Agreement, the Secretary of Rockwell Automation may limit the number, frequency or volume of successive exercises of any of the Options in which payment is made, in whole or in part, by delivery of Stock pursuant to this subparagraph (d) to prevent unreasonable pyramiding of such exercises.

(e)

An exercise completed through the Customer Service Center or Schwab Equity Award Center ^® , whether or not full payment of the exercise price for the Option Stock is received by Charles Schwab, shall constitute a binding contractual obligation by you (or the other person entitled to exercise the Options) to proceed with and conclude that exercise of the Options (but only so long as you continue, or the other person entitled to exercise the Options continues, to be entitled to exercise the Options on that date). By your acceptance of this Stock Option Agreement, you agree (for yourself and on behalf of any other person who becomes entitled to exercise the Options) to deliver or cause to be delivered to Charles Schwab in full the exercise price for the Option Stock, that payment being by check, wire transfer, in Stock or in a combination of check and Stock, on or before the third business day after the date on which you complete the exercise through the Customer Service Center or Schwab Equity Award Center ^® . If such payment is not made, you (for yourself and on behalf of any other person who becomes entitled to exercise the Options) authorize the Corporation, in its discretion, to set off against salary payments or other amounts due or which may become due you (or the other person entitled to exercise the Options) any balance of the exercise price for such Option Stock remaining unpaid thereafter.

(f)

An Exercise Confirmation representing the number of shares of Option Stock purchased will be issued the third business day (i) after Charles Schwab has received full payment therefor or (ii) at Rockwell Automation’s or Charles Schwab’s election in their sole discretion, after Rockwell Automation or Charles Schwab has received (x) full payment of the exercise price of such Option Stock and (y) any reimbursement in respect of withholding taxes due pursuant to Section 5 herein.

4.	Transferability

The Options are not transferable by you otherwise than by will or by the laws of descent and distribution. During your lifetime, only you are entitled to exercise the Options.

5.	Withholding

Rockwell Automation, your employer and Charles Schwab shall have the right, in connection with the exercise of the Options in whole or in part, to deduct from any payment to be made by Rockwell Automation or Charles Schwab under the Plan an amount equal to the taxes required to be withheld by law with respect to such exercise or to require you (or any other person entitled to exercise the Options) to pay to it an amount sufficient to provide for any such taxes so required to be withheld. By your acceptance of this Stock Option Agreement, you agree (for yourself and on behalf of any other person who becomes entitled to exercise the Options) that if Rockwell Automation or Charles Schwab elects to require you (or such other person) to remit an amount sufficient to pay such withholding taxes, you (or such other person) must remit that amount within three (3) business days after the completion of the Option exercise. If such payment is not made, Rockwell Automation, in its discretion, shall have the same right of set-off with respect to payment of the withholding taxes in connection with the exercise of the Option as provided under Section 3(e) herein with respect to payment of the exercise price.

6.	Headings

The section headings contained in these Stock Option Terms and Conditions are solely for the purpose of reference, are not part of the agreement of the parties and shall in no way affect the meaning or interpretation of this Stock Option Agreement.

7.	References

All references in these Stock Option Terms and Conditions to Sections, paragraphs, subparagraphs or clauses shall be deemed to be references to Sections, paragraphs, subparagraphs and clauses of these Stock Option Terms and Conditions unless otherwise specifically provided.

8.	Entire Agreement

This Stock Option Agreement and the Plan embody the entire agreement and understanding between Rockwell Automation and you with respect to the Options, and there are no representations, promises, covenants, agreements or understandings with respect to the Options other than those expressly set forth in this Stock Option Agreement and the Plan.

9.	Applicable Laws and Regulations

This Stock Option Agreement and Rockwell Automation’s obligation to issue Option Stock hereunder are subject to applicable laws and regulations, as well as Rockwell Automation’s insider trading policies.

Exhibit 1 Exercise Request and Attestation Form (for use with already-owned shares)

Exhibit 12

ROCKWELL AUTOMATION, INC.

COMPUTATION OF RATIO OF EARNINGS TO FIXED CHARGES

NINE MONTHS ENDED JUNE 30, 2008

(in millions, except ratio)


EARNINGS AVAILABLE FOR FIXED CHARGES:
Income from continuing operations before income taxes	$	632.2
Minority interest in income of subsidiaries		0.8
Undistributed earnings of affiliates		—

		633.0

Add fixed charges included in earnings:
Interest expense		52.1
Interest element of rentals		38.4

		90.5

Total earnings available for fixed charges	$	723.5

FIXED CHARGES:
Fixed charges included in earnings	$	90.5
Capitalized interest		1.4

Total fixed charges	$	91.9

RATIO OF EARNINGS TO FIXED CHARGES (1)		7.9

(1)

In computing the ratio of earnings to fixed charges, earnings are defined as income from continuing operations before income taxes, adjusted for minority interest in income or loss of subsidiaries, undistributed earnings and losses of affiliates, and fixed charges exclusive of capitalized interest. Fixed charges consist of interest on borrowings and that portion of rentals deemed representative of the interest factor.

Exhibit 15

July 29, 2008

Rockwell Automation, Inc.

1201 South Second Street

Milwaukee, Wisconsin 53204

We have reviewed, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the unaudited condensed consolidated interim financial information of Rockwell Automation, Inc. and subsidiaries for the three-month and nine-month periods ended June 30, 2008 and 2007, and have issued our report dated July 29, 2008, which includes an explanatory paragraph regarding the adoption of Financial Accounting Standards Board Interpretation No. 48, “Accounting for Uncertainty in Income Taxes”. As indicated in such report, because we did not perform an audit, we expressed no opinion on that information.

We are aware that our report referred to above, which is included in your Quarterly Report on Form 10-Q for the quarter ended June 30, 2008, is incorporated by reference in Registration Statement Nos. 333-17031, 333-17055, 333-17405, 333-89219, 333-93593, 333-38444, 333-101780, 333-113041, 333-125702, 333-149581, 333-150019 and 333-151476 on Form S-8 and Registration Statement Nos. 333-24685, 333-43071 and 333-147658 on Form S-3.

We also are aware that the aforementioned report, pursuant to Rule 436(c) under the Securities Act of 1933, is not considered a part of the Registration Statement prepared or certified by an accountant or a report prepared or certified by an accountant within the meaning of Sections 7 and 11 of that Act.

/s/ DELOITTE & TOUCHE LLP

Milwaukee, Wisconsin

Exhibit 31.1

CERTIFICATION OF CHIEF EXECUTIVE OFFICER

I, Keith D. Nosbusch, certify that:

1.	I have reviewed this quarterly report on Form 10-Q of Rockwell Automation, Inc.;

2.	Based on my knowledge, this report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this report;

3.	Based on my knowledge, the financial statements, and other financial information included in this report, fairly present in all material respects the financial condition, results of operations and cash flows of the registrant as of, and for, the periods presented in this report;

The registrant’s other certifying officer and I are responsible for establishing and maintaining disclosure controls and procedures (as defined in Exchange Act Rules 13a-15(e) and 15d-15(e)) and internal control over financial reporting (as defined in Exchange Act Rules 13a-15(f) and 15d-15(f)) for the registrant and have:

Designed such disclosure controls and procedures, or caused such disclosure controls and procedures to be designed under our supervision, to ensure that material information relating to the registrant, including its consolidated subsidiaries, is made known to us by others within those entities, particularly during the period in which this report is being prepared;

Designed such internal control over financial reporting, or caused such internal control over financial reporting to be designed under our supervision, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles;

Evaluated the effectiveness of the registrant’s disclosure controls and procedures and presented in this report our conclusions about the effectiveness of the disclosure controls and procedures, as of the end of the period covered by this report based on such evaluation; and

Disclosed in this report any change in the registrant’s internal control over financial reporting that occurred during the registrant’s most recent fiscal quarter (the registrant’s fourth fiscal quarter in the case of an annual report) that has materially affected, or is reasonably likely to materially affect, the registrant’s internal control over financial reporting; and

5.	The registrant’s other certifying officer and I have disclosed, based on our most recent evaluation of internal control over financial reporting, to the registrant’s auditors and the audit committee of the registrant’s board of directors (or persons performing the equivalent functions):

All significant deficiencies and material weaknesses in the design or operation of internal control over financial reporting which are reasonably likely to adversely affect the registrant’s ability to record, process, summarize and report financial information; and

Any fraud, whether or not material, that involves management or other employees who have a significant role in the registrant’s internal control over financial reporting.

Date: July 29, 2008

/s/ K EITH D. N OSBUSCH

Keith D. Nosbusch

Chairman, President and
Chief Executive Officer

Exhibit 31.2

CERTIFICATION OF CHIEF FINANCIAL OFFICER

I, Theodore D. Crandall, certify that:

1.	I have reviewed this quarterly report on Form 10-Q of Rockwell Automation, Inc.;

2.	Based on my knowledge, this report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this report;

3.	Based on my knowledge, the financial statements, and other financial information included in this report, fairly present in all material respects the financial condition, results of operations and cash flows of the registrant as of, and for, the periods presented in this report;

5.	The registrant’s other certifying officer and I have disclosed, based on our most recent evaluation of internal control over financial reporting, to the registrant’s auditors and the audit committee of the registrant’s board of directors (or persons performing the equivalent functions):

Any fraud, whether or not material, that involves management or other employees who have a significant role in the registrant’s internal control over financial reporting.

Date: July 29, 2008

/s/ T HEODORE D. C RANDALL

Theodore D. Crandall

Senior Vice President and

Chief Financial Officer

Exhibit 32.1

CERTIFICATION OF PERIODIC REPORT

I, Keith D. Nosbusch, Chairman, President and Chief Executive Officer of Rockwell Automation, Inc. (the “Company”), hereby certify pursuant to Section 906 of the Sarbanes-Oxley Act of 2002, 18 U.S.C. Section 1350, that:

(1) the Quarterly Report on Form 10-Q of the Company for the quarter ended June 30, 2008 (the “Report”) fully complies with the requirements of Section 13(a) of the Securities Exchange Act of 1934; and

(2) the information contained in the Report fairly presents, in all material respects, the financial condition and results of operations of the Company.

Date: July 29, 2008

/s/ K EITH D. N OSBUSCH

Keith D. Nosbusch

Chairman, President and
Chief Executive Officer

Exhibit 32.2

CERTIFICATION OF PERIODIC REPORT

I, Theodore D. Crandall, Senior Vice President and Chief Financial Officer of Rockwell Automation, Inc. (the “Company”), hereby certify pursuant to Section 906 of the Sarbanes-Oxley Act of 2002, 18 U.S.C. Section 1350, that:

(2) the information contained in the Report fairly presents, in all material respects, the financial condition and results of operations of the Company.

Date: July 29, 2008

/s/ T HEODORE D. C RANDALL

Theodore D. Crandall

Senior Vice President and
Chief Financial Officer