PART I

FORWARD-LOOKING STATEMENTS

This report contains “forward-looking statements”. In some cases, you can identify forward-looking statements by terms such as “may,” “intend,” “might,” “will,” “should,” “could,” “would,” “expect,” “believe,” “estimate,” “predict,” “potential,” or the negative of these terms and similar expressions intended to identify forward-looking statements. These statements reflect the Company’s current views with respect to future events and are based on assumptions and subject to risks and uncertainties. The Company discusses many of these risks and uncertainties in greater detail in Part I, Item 1 of this 10-K under the heading “Risk Factors.” These risks and uncertainties may cause the Company’s actual results, performance, or achievements to be materially different from any future results, performance, or achievements expressed or implied by the forward-looking statements. You should not place undue reliance on these forward-looking statements. Also, these forward-looking statements represent the Company’s estimates and assumptions as of the date of this report. The Company is under no duty to update any of the forward-looking statements after the date of this report to conform such statements to actual results or to changes in our expectations.

The following discussion should be read in conjunction with mPhase Technologies’ financial statements and related notes included elsewhere in this report.

General Description of the Business

mPhase Technologies, Inc., is a publicly-held New Jersey company founded in 1996 with over 19,000 shareholders and approximately 870 million shares of common stock outstanding as of June 30, 2009. The Company’s common stock is traded on the Over the Counter Bulletin Board under the ticker symbol XDSL. The Company has offices in Little Falls and Newark, New Jersey as well as Norwalk, Connecticut.

mPhase is a development-stage company specializing in microfluidics, microelectromechanical systems (MEMS) and nanotechnology. The Company develops nanotechnology-enabled products for commercial and military applications. The Company’s flagship product is its Smart NanoBattery providing Power On Command™. The new well-patented battery technology, based on the phenomenon of electrowetting, offers a unique way to store energy and manage power.. Features of the Smart NanoBattery include: potentially infinite shelf life, environmentally friendly design, fast ramp to power, programmable control, and direct integration with microelectronic devices. The platform technology behind the Smart NanoBattery is a porous nanostructured material used to repel and precisely control the flow of liquids. The material has a Smart Surface that can potentially be designed for other innovative products such as self-cleaning applications, water purification/desalination, liquid filtration/separation, and environmental cleanup.

mPhase has been awarded a Phase II Small Business Technology Transfer Program (STTR) grant, part of the Small Business Innovation Research (SBIR) program, from the U.S. Army for continued development of its Smart NanoBattery as a reserve battery for a critical computer memory application.

In a separate effort, mPhase has also developed a mechanically activated reserve battery. As a result of a unique combination of battery and mechanical engineering, such reserve battery also has a potentially infinite shelf-life. The battery is part of the Company’s new Emergency Flashlight product line that is currently being designed by and co-branded with Porsche Design Studio a premiere world-class company specializing in high-end accessory products for the luxury automotive manufacturer.

3

Description of Operations

Microfluidics, MEMS, and Nanotechnology

In February of 2004, mPhase entered the business of developing new products based on materials whose properties and behavior are controlled at the micrometer and nanometer scales. (For reference, a micrometer or micron is equal one millionth (10 ^-6 ) of a meter and a nanometer is one billionth (10 ^-9 ) of a meter – the scale of atoms and molecules. A human hair is approximately 50 microns in diameter, or 50,000 nanometers thick.)

The Company has expertise and capabilities in microfluidics, microelectromechanical systems (MEMS), and nanotechnology. Microfluidics refers to the behavior, precise control and manipulation of fluids that are geometrically constrained to a small, typically micrometer scale. MEMS is the integration of mechanical elements, sensors, actuators, and electronics on a common silicon substrate through microfabrication technology. Nanotechnology is the creation of functional materials, devices and systems through control of matter (atoms and molecules) on the nanometer length scale (1-100 nanometers), and exploitation of novel phenomena and properties (physical, chemical, biological, mechanical, electrical) at that length scale.

In its Smart NanoBattery, mPhase exploits the physical phenomenon of electrowetting by which a voltage is used to change the wetting properties of a liquid/solid interface at the nanometer scale. Consider water as the liquid. Through electrowetting, mPhase can change a surface from what is referred to as a hydrophobic (“water fearing”) state to a hydrophilic (“water loving”) state. In the hydrophobic state, the water beads up or is repelled by the surface. In the hydrophillc state, the water spreads out or is absorbed by the surface. The ability to electronically control the wetting characteristics of a surface at the nanometer scale forms the basis of mPhase’s nanotechnology operations and intellectual property portfolio.

In the Smart NanoBattery application, mPhase uses electrowetting as a new technique to s activate or literally “turn on” a battery once it is ready to be used for the first time.. At the heart of the Smart NanoBattery is a porous, nanostructured superhydrophic or superlyophobic membrane designed and fabricated by mPhase. The so-called superhydrophobic membrane applies to water and the superlyophobic membrane applies to nonaqueous or organic liquids such as ethanol or mineral oil. The difference between the two membrane types lies in the nanoscale architecture at the surface. By virtue of its superhydrophobic or superlyophobic character, the membrane, although porous, is able to physically separate the liquid electrolyte from the solid electrodes so that the battery remains dormant or inactive, thus providing no voltage, or current until called upon. This electrolyte-electrode separation gives the battery the feature of potentially unlimited shelf life and the benefit of being always ready when needed, which is not necessarily the case for conventional batteries. Electrowetting alters the liquid/membrane interface so that the liquid is now able to flow over the membrane’s surface and rapidly move through the pores where it is able to contact the solid electrode materials located on the other side of the membrane.

mPhase uses MEMS, to precisely control the machining of silicon-based materials at the micrometer and nanometer scales. This ability has led to the Company’s proprietary membrane design that controls the wetting and movement of liquids on a solid surface. mPhase uses microfluidics to control the flow of liquid electrolyte through the porous membrane and is also the basis for other possible applications such as self-cleaning surfaces, filtration and separation and liquid delivery systems.

mPhase has also developed a manually-activated lithium reserve battery using an innovative industrial and mechanically-engineered design. The battery is activated by a unique triggering mechanism that rapidly releases and distributes the liquid electrolyte inside the battery. The electrolyte immediately contacts the battery’s solid electrodes to produce electric power. Unlike conventional batteries that have relatively short shelf lives prior to initial use of the flashlight, the mPhase reserve battery has a shelf life of over 20 years.

4

History of Nanotechnology Operations

Smart NanoBattery

mPhase Technologies along with Bell Labs, jointly conducted research from February 2004 through April of 2007 that demonstrated control and manipulation of fluids on superhydrophobic and superlyophobic surfaces to create a new type of battery or energy storage device with power management features obtained by controlling the wetting behavior of a liquid electrolyte on a solid surface. The scientific research conducted set the ground work for continued development of the Smart NanoBattery and formed a path to commercialization of the technology for a broad range of market opportunities. During 2005 and 2006, the battery team tested modifications and enhancements to the internal design of the battery to optimize its power and energy density characteristics, as well as making engineering improvements that were essential in moving the battery from a zinc-based chemistry to a commercial lithium-based chemistry that can be manufactured on a large scale. The Company began its efforts by entering into a $1.2 million 12 month Development Agreement with the Bell Labs division of Alcatel/Lucent for exploratory research of control and manipulation of fluids on superhydrophobic surfaces to create power cells ( batteries) by controlling wetting behavior of an electrolyte on nanostructured electrode surfaces. The goal was to develop a major breakthrough in battery technology creating batteries with longer shelf lives as the result of no direct electrode contact (meaning no power drain prior to activation). The Company extended its development effort twice for an additional 2 year ending in March of 2007 and for two additional periods thereafter through July 31, 2007. During this time, the technical focus shifted from trying to separate the liquid electrolyte from nanostructured electrodes to developing a nanostructured membrane that could physically separate the liquid electrolyte from the solid electrodes.

mPhase also began working with the Rutgers University Energy Storage Research Group (ESRG) in July of 2005 to conduct contract research in advanced battery chemistries involving lithium. This work involved characterizing and testing materials that could be used in the mPhase battery. In July of 2007, the relationship shifted to a collaboration focused on developing a memory backup battery needed by the U.S. Army. The work was funded through a Phase I Small Business Technology Transfer Program (STTR) grant.

Also in July of 2007, mPhase formed a new wholly-owned subsidiary, Always Ready, Inc., to focus on the development of its nanotechnology products. The Company has used this subsidiary as a division of the Company in order to develop increasing brand recognition of its battery products. The Company decided in September of 2007 to transfer its development work out of Bell Labs (Alcatel/Lucent) in order to ace;erate and broaden its nanotechnology product commercialization efforts. Bell Labs had engaged in its battery research and development for the Company for zinc-based batteries and was limited since it did not have facilities capable of handling lithium chemistry. mPhase has continued to work with Rutgers ESRG which has facilities capable of handling lithium based batteries and has also engaged in work with foundries and other companies to supply essential components, fabricate prototypes, and plan manufacturing approaches. These companies currently include Silex, a well-respected silicon foundry in Sweden and Eagle Picher, a well known battery designer and manufacturer that focuses on high-end batteries for military applications located in Joplin, Missouri.

In February of 2008, the Company announced that a prototype of its Smart NanoBattery was successfully deployed in a gun-fired test at the Aberdeen Proving Ground at Maryland. The test was conducted by the U.S. Army Armament Research and Development and Engineering Center (ARDEC) of Picatinny, New Jersey. The battery not only survived the harsh conditions of deployment at a gravitational force in excess of 45,000 g, but was also flawlessly activated in the process.

5

In March of 2008, mPhase announced that it had been invited to submit a proposal for a Phase II STTR grant based upon the successful work it had performed on the Phase I grant to develop a version of the Smart NnaoBattey referred to as the multi-cell, micro-array reserve battery for a critical U.S. Army memory backup application The Phase II grant in the gross amount of $750,000 (net $500,000) was granted to the Company in the middle of September of 2008. In March of 2008, the Company also announced the successful transfer to a commercial foundry of certain processes critical to the manufacturing of its Smart NanoBattery. This will enable fabrication of the porous membranes for the multi-cell, micro-array reserve battery mentioned above.. The Company successfully manufactured nanostructured membranes at the foundry that are essential to commercial production of the battery. By achieving a series of delayed activations, the shelf-life and continuous run-time of such battery is increased to a period of time in excess of twenty years. In April of 2008, the Company announced that it had successfully activated it first Smart NanoBattery prototype by electrowetting using a hard-wired configuration and a remotely-activated device. Remote activation plays a key role in providing power to wireless sensors systems and RFID tags.

Also, in April of 2008, the Company announced that it had successfully produced its first lithium-based reserve battery with a soft or pouch package and breakable separator (in place of the electrowettable membrane) that relies on mechanical rather electrical activation to provide Power On Command™. The Company believes that it is a significant milestone in moving from a low energy density zinc-based battery to a higher energy density lithium-based battery towards proving that this mechanically-activated reserve battery will eventually be economically and commercially viable.

During the fiscal year ended June 30, 2008 the Company has continued to refine and improve prototypes of its manually-activated reserve battery as well as made significant progress in its Smart NanoBattery development in connection with meeting the specifications and requirements of the Phase II grant received from the U.S. Army. Such grant was renewed for a second year by the Army on August 27, 2009

Emergency Flashlight

On December 5, 2008 mPhase Technologies, Inc. signed a contract with Porsche Design Gesellschaft m.b.H., Flugplatzstrasse 29, A,S700 Zell am see. Austrla [“Porsche Design’ Studio”], to design a premium version of the AlwaysReady Emergency Flashlight. The flashlight will contain mPhase’s proprietary mechanically-activated lithium reserve battery. The battery contains a breakable barrier that separates the solid electrodes from the liquid electrolyte until the battery is manually activated. Unlike traditional batteries, the mPhase battery remains in an inert state with no leakage or self-discharge until activation. The mPhase battery is designed to have an almost infinite shelf life making it ideal for emergency lighting applications. The premium flashlight will be marketed as an accessory for automobile roadside emergency kits.

On January 29, 2009, the Company announced that it has contracted with EaglePicher Technologies to design and manufacture in small quantiites its mechanically-acitvated battery that will be used in the its new Emergency Flashlight. EaglePicher was selected for the project because of their experience in custom and standardized power solutions for the extreme environments of aerospace and military applications as well as medical and commercial applications.

The reserve battery is a manually activated lithium cell designed to provide Power On Command. The battery remains dormant until “turned on” by the user. It will be built to the highest standards with a minimum storage life of 20 years. Once activated, the reserve battery is expected to deliver the electrical performance of a standard primary CR123 battery used in many portable electronic applications today.

6

EaglePicher Technologies, LLC (EPT), and EaglePicher company, is a world leader in custom and standardized power solutions for the extreme environments of aerospace and military applications as well as medical and commercial applications. The company specializes in design and manufacture of battery cells, battery packaging, battery management systems (BMS), analysis, environmental testing, and energetic devices. Active in battery development and testing since 1922, EPT has the most experience and broadest capability in battery electrochemistry of any battery supplier.

Magnetometer

In March of 2005, the Company entered into a second Development Agreement for 12 months at a cost of $1.2 million with the Bell Labs to develop MEMS-based ultrasensitive magnetic sensor devices, also known as magnetometers, that could be used in military and commercial electronics ( e.g., cell phones) for determining location, as well as in portable security and metal detection applications. The agreement was renewed in April of 2006 for another 12 months. Although proven to work in the lab, the magnetometer technology could not be scaled up as quickly and as cost effectively as the battery. The project was suspended in September 2007 so that all technical resources could be allocated to the battery project. The Company is entitled to certain royalties from the Magnetometer if Alcatel/Lucent ultimately generates revenues from the product.

IPTV

Historically, the Company since its inception has focused upon developing innovative solutions for the delivery of Broadcast Television as part of a “triple play” of services that includes voice and high-speed internet for telephone service providers globally. Beginning in fiscal year 2004, the Company began developing Broadcast television delivery solutions through software/middleware designed to enable telephone service providers to deliver video data using internet protocol. The Company’s middleware/software is highly scalable, potentially saving telephone service providers significant hardware deployment costs for routers and servers required for the carrier class delivery of broadcast television using internet protocol. Such solution potentially expands the content of available information from the internet into broadcast quality television. The Company’s middleware is capable of delivering over copper, fiber, coax or any infrastructure representing a combination of the foregoing that is used by a telecommunications service provider. The Company has not to date been able to derive any significant revenue from our TV+ solution.

Because the roll-out of broadcast television using internet protocol has been a lengthy process for major service providers in the United States, the Company has suspended development of new features for its TV+ solution in order to conserve financial resources pending further development in the U.S. market. All inventory has been written off and all strategic alternatives relative to this business segment including the valuation and sale of assets or licensing of the technology are being evaluated.

Nanotechnology Products

Platform Technology

The surface is an important part of virtually every physical object and often plays an overriding role in many processes, beyond just connectivity and structural support, but more deeply into areas involving chemical and biological interactions. In some instances, the surface provides an easy entry into the chemical or biological systems, in others it protects the internal elements of the object, surrounded by the surfaces.

mPhase’s platform technology is the Smart Surface . By being able to control the surface properties of materials down to the nanometer scale, new and improved devices can be designed and built that may lead to compelling business opportunities. One type of smart surface of particular interest allows the properties to be changed in response to an external stimulus.

7

Initially, mPhase’s development focused on MEMS devices by manipulating the surface of silicon materials – the same material used to make microelectronic materials and devices. Using physical and chemical processes, the surface of the silicon is modified to make solid porous structures known as membranes. This is where microfluidics comes into play. These membranes can be used to selectively control the flw of liquids through the pores or openings at the micrometer length scale.

Surfaces may be characterized as hydrophilic or hydrophobic depending on whether or not they attract or repel water (or other liquids). A hydrophilic surface can be wet and adsorbs water. A hydrophobic surface, on the other hand, cannot be wet. Hydrophilic and hydrophobic surfaces are abundant in nature and in synthetic materials, both organic and inorganic in chemical composition. A familiar example of a hydrophilic surface is a sponge that readily soaks up water. By contrast, many plant leaves and flower petals are hydrophobic, as are insect parts and bird feathers. Synthetic hydrophobic surfaces include Scotchgard™ treated fabric, Teflon® coated metal, or Rain-X® coated glass. On a hydrophobic surface, water beads up and can move around without being absorbed by the solid material that it is resting on.

So-called superhydrophobic surfaces are also found in nature and can now be replicated in the lab. The lotus leaf and rose petal, for example, exhibit superhydrophobicity. Here water droplets form almost perfect spheres with hardly any contact with the underlying solid surface. This makes the liquid even easier to move and manipulate.

The synthesis of superhydrophobic surfaces has recently been made possible by advances in nanotechnology and mPhase is leading the way to better understand and create materials and devices incorporating these unique surface properties.

As mPhase’s research and development efforts evolve, in addition to silicon materials, the ability to control the surface properties of materials can be extended to other substances such as polymers, ceramics, metals and fibers as examples, providing opportunities for our platform technology to be used in a range of potential applications such as energy storage and power management for portable electronics and microelectronics, self-cleaning surfaces, filters for water purification or desalination systems, materials for environmental remediation that separate liquids or solvents, and other situations where the control of the interaction of a solid surface exposed to a liquid is vitally important.

Smart NanoBattery

Battery technology has changed little in its fundamentals over the past 150 years. As a result, ordinary batteries begin dissipating energy as soon as they are assembled and therefore have limited shelf life. Chemistries are fixed inside the package so the user cannot interact with the contents to program functionality. The size and form of batteries have not kept pace with the miniaturization of electrical components, microprocessors and integrated circuits. As a result, the optimal implementation of an electronic device is not always achieved. Some batteries contain chemicals that are not considered safe or environmentally friendly (“green”). This makes disposal a potential issue.

mPhase is challenging this convention by using their proprietary superhydrophobic porous silicon membrane technology as the basis to build the Smart NanoBattery providing Power On Command™.

Superhydrophobicity initially keeps the liquid electrolyte physically separated from the solid electrodes of the battery, thus preventing the chemical reactions from occurring that cause the battery to provide power. This gives the Smart NanoBattery the benefit of potentially infinite shelf life.

8

A conventional battery loses some capacity while sitting on the shelf in its package or stored in an electronic or electrical device, even before being used for the first time. On the other hand, the Smart NanoBattery is built so that it is inactive and remains that way indefinitely until it is turned on. No power is lost to self-discharge or leakage current prior to activation. When needed, the Smart NanoBattery can be activated on command via the phenomenon of electrowetting. The surface properties of the porous silicon membrane are selectively controlled to shift instantly from a superhydrophobic to hydrophilic state. In other words, electrowetting acts as the triggering mechanism.

mPhase has successfully fabricated and demonstrated its first 3-volt lithium-based Smart NanoBattery, based on a design allowing either manual or remote activation by the user, the feature known as Power on Command™.

By incorporating the phenomenon of electrowetting on nanostructured surfaces into a revolutionary way of storing energy, the Smart NanoBattery provides power to portable electronic and microelectronic devices exactly when and where it is needed. It is an alternative and an augmentation to conventional batteries, still converting stored chemical energy into usable electrical energy, but in a way that is potentially more reliable, more versatile, more environmentally friendly, and less expensive than the industry norm.

Applications

mPhase is exploring military and commercial applications of smart surfaces in which the properties can be accurately and precisely controlled down to the nanometer scale. Electrowetting allows the switching from a hydrophobic to hydrophilic state as a result of an electronic stimulus.

The Smart NanoBattery, mPhase’s first smart surface product, has a unique architecture that enables a shelf life of decades, remote activation, programmable control, scalable manufacturing, and adaptability to multiple configurations. The value proposition to the end user is to have a source of energy or power that is literally always ready - reliable, convenient, low cost - a battery guaranteed to work at full capacity when and where you need it.

The Smart NanoBattery can conceivably supply power “ on command” to a wide variety of portable electronic and microelectronic devices used in military, medical, industrial, and consumer applications.

mPhase has already proven that the battery works in lab tests as well as in a significant field test conducted for the U.S. Army as part of a guided munitions project. The relationship with the Army also includes a $850,000 funded project to develop a battery for a mission critical computer memory backup application. The target is a small footprint, 3-volt lithium battery with a minimum shelf life of 20 years and uninterruptible power output during this time period. No other battery technology available today can deliver the long-term performance requirements specified by the U.S. Army for this application.

The Smart NanoBattery can potentially be designed to accommodate a variety of sophisticated portable electronic and microelectronic devices including next-generation cell phones and PDAs, handheld gaming devices, wireless sensor systems, RFID tags, high-tech flashlights and beacons, health alert alarms, and non-implantable and implantable medical devices such as pacemakers.

Initial applications will address the need to supply emergency and backup power to a range of products for defense and security, with future applications in the commercial and consumer arenas.

Other Products

As its first commercial product, mPhase is developing an emergency flashlight using a mechanically-activated lithium reserve battery with a patent-pending breakable separator in place of the electrowettable membrane used in the Company’s Smart NanoBattery. The emergency flashlight is envisioned as a compact device that would be activated with a simple push-button switch to provide Power On Command™ in the event of an emergency. The device would be kept in the glove compartment of a car, on boats, trains or planes, coupled with fire extinguishers, packed with safety, first aid and survival kits.

9

Business Development, Organization, and Acquisition Activities

mPhase was incorporated in New Jersey in 1979 under the name Tecma Laboratory, Inc. In 1987, the Company changed its name to Tecma Laboratories, Inc. As Tecma Laboratories, Inc., the Company was primarily engaged in the research, development and exploration of products in the skin care field. On February 17, 1997, the Company acquired Lightpaths, Inc., a Delaware corporation, which was engaged in the development of telecommunications products incorporating DSL technology, and the Company changed its name to Lightpaths TP Technologies, Inc.

On January 29, 1997, the Company formed another wholly-owned subsidiary called TLI Industries, Inc. The shares of TLI were spun off to its stockholders on March 31,1997 after the Company transferred the assets and liabilities, including primarily fixed assets, patents and shareholder loans related to the prior business of Tecma Laboratories. As a consequence of these transactions, the Company became the holding company of its wholly-owned subsidiary, Lightpaths, Inc. on February 17, 1997.

On May 5, 1997, the Company completed a reverse merger with Lightpaths TP Technologies, Inc. and thereafter changed its name to mPhase Technologies, Inc. on June 2, 1997.

On March 26, 1998, the Company entered into a Licensing Agreement with Georgia Tech Research Corporation (“GTRC”) in which mPhase became the exclusive licensee of all patents received by GTRC in connection with development of the legacy Traverser DVDDS. GTRC is entitled to receive a royalty equal to 5% of gross sales of the Traverser DVDDS and 30% of any “lump sum payments” received in connection with revenues received by mPhase from the Traverser DVDDS product under the terms of its license, as amended. The Traverser DVDDS has been replaced by the Company’s IPTV solution.

On June 25, 1998, mPhase acquired Microphase Telecommunications, Inc., a Delaware corporation, from Microphase Corporation by issuing 2,500,000 shares of its common stock. Microphase Telecommunications’ principal assets were patents and patent applications utilized in the development of its proprietary Traverser technology.

In March 2000, mPhase entered into a joint venture with AlphaStar International, Inc. to form an entity called mPhaseTelevision.Net, Inc. in which the Company held a 50% interest. On May 1, 2000, the Company acquired an additional 6.5% interest in mPhaseTelevision.Net, Inc. and made it one of its consolidated subsidiaries.

On March 14, 2000, mPhase entered into an agreement with BMW Manufacturing Corp., located in South Carolina. Under the agreement, the Company installed its legacy Traverser DVDDS product for BMW’s telephone transmission network at an automotive manufacturing plant to enable video broadcast of information to its employees. Such system was replaced with a competitor’s network during fiscal year 2007.

In December of 2001, Hart Telephone company located in Hartwell, Georgia completed the building and development of its digital headend enabling Hart to test the Company’s legacy Traverser DVDDS product with approximately 20 customers receiving about 80 channels of television services utilizing such platform.

In May of 2002, mPhase initiated discussion for development of a cost-reduced set top box (INI) with the Bell Laboratories division of Lucent Technologies, Inc.

10

Effective December 1, 2002, mPhase entered into a Development Agreement with the Bell Laboratories division of Lucent Technologies, Inc. for the development of mPhase’s broadcast television switch as an integrated platform with the Lucent Stinger DSL Access Concentrator.

On December 9, 2002, pursuant to a Statement of Work, Lucent commenced development of the Broadcast Television Switch for mPhase. On December 15, 2002, mPhase engaged Lucent for the cost reduction of its Traverser INI set top box.

On January 21, 2003 mPhase entered into a Co-Branding Agreement with Lucent Technologies under which mPhase’s INI set top box would be co-branded with the Lucent Technologies name and logo.

On April 4, 2003, mPhase entered into a Systems Integration Agreement with Lucent Technologies. Under the terms of such an agreement mPhase has been given the exclusive rights to sell worldwide as a ‘bundled’ solution the Stinger in connection with mPhases’s BTS.

Effective September 15, 2003, mPhase entered into a Development Agreement with the Bell Laboratories division of Lucent Technologies, Inc. that has been extended through December of 2005 pursuant to additional Statements of Work under such Development Agreement for development of its IPTV solution.

Effective February 3, 2004, mPhase entered into a Development Agreement with the Bell Laboratories division of Lucent Technologies, Inc. for the development of micro power source arrays fabricated using nanotextured superhydorphobic materials.

On November 28, 2004, mPhase entered into a Software License Agreement with Espial Group, Inc to be used in the set top box of its TV+ solution. Espial Group, Inc. is a leader in system operating software for set top boxes used to receive IPTV.

On January 3, 2005, mPhase entered into a work order with Magpie Telecom Insiders, Inc. pursuant to the terms of a Software Development Agreement dated September 2, 2004 for purposes of adding video on demand to its TV+ solution.

Effective March 5, 2005, mPhase extended its Development Agreement with Bell Labs for an additional 12 months for the development of micro power source power arrays.

Effective March 10, 2005, mPhase entered into a Development Agreement with the Bell Laboratories division of Lucent Technologies Inc. for the development of a new generation of magnetic field sensors using the science of nanotechnology.

In April of 2006, mPhase renewed each of the nanotechnology agreements with Bell Labs dated March 5, 2005 and March 10, 2005, respectively, for an additional 12 months at the cost of $100,000 per month each.

In May of 2006, the Development Agreement with the Bell Labs division of Lucent Technologies, Inc. covering the Company’s TV+ solution was not renewed by the Company and Velankani, a software designer headquartered in India, assumed responsibilities for development of the system management software object code and system integration of the Company’s TV+ solution. The Company has been working with Velankani for system integration testing since January of 2006.

11

On June 27, 2006, the Company entered into Amendment No. 4 to a Software License Agreement with Espial Group, Inc. which extended the term of its original development agreement through 2008 for Software development and support of the TV+ software in connection with multiple set top boxes of various vendors.

On September 13, 2006, the Company announced its first test of it IPTV solution with Comstar/Odessa, a major telecommunications service provider in the Ukraine for a trial deployment of our IPTV solution. Upon successful completion of such trial, it is anticipated that a 6,000 subscriber deployment would follow generating the Company’s first revenues with respect to its IPTV solution.

As of November 14, 2006, the Company entered into a Common Amendment to its Statement of Work with Velankani Systems Technologies, Inc. rescheduling certain payments due for software integration services for the Company’s IPTV solution performed by Velankani for mPhase including a conversion of a portion of the outstanding payable to mPhase common stock at $.17 per share.

On December 13, 2006, the Company entered into a Non-Exclusive Distribution Agreement with Netdialogue, a reseller and service integrator of IPTV middleware for telecommunications service providers located in Russia.

On January 4, 2007, the Company entered into a Cooperative Research and Development Agreement for Novel Reserve Cell Technologies and High Sensitivity Magnetometer Technology with the U.S. Army Armament Research Center located in Picatinny, New Jersey.

On January 23, 2007, the Company entered into a Memorandum of Understanding with Latens Systems Limited under which Latens grants to mPhase a license to use its conditional access software (encoding and encryption for IPTV delivery).

On February 3, 2007, the Company entered into Amendment No. 4 to a Development Agreement effective February 3, 2004, with Lucent Technologies, Inc. extending research and development through April 27, 2007, relating to micro-power source arrays fabricated using nano-textured superhydrophobic materials.

On February 17, 2007, the Company extended a Cooperative Research Agreement through December 31, 2007, originally entered into on July 15, 2005 with Rutgers, The State University of New Jersey governing cooperative research on a Lithium nanostructured reserve battery.

On February 22, 2007, the Company entered into a new Statement of Work with Espial Group, Inc for Integration of its EVO software to the Bitband Server for two set top boxes manufactured by Amino and Tilgin respectively in connection with mPhase’s IPTV solution. The Company simultaneously entered into a Payment Agreement with Espial Group, Inc rescheduling certain payments owed by the Company for services performed in connection with software development of its IPTV solution.

On March 28, 2007, the Company entered into a Reseller Agreement with Steeleye Technology, Inc. for software utilized for high use rollover redundancy for IPTV.

On April 17, 2007, the Company announced that it had formed AlwaysReady, Inc., a New Jersey Corporation, as a new wholly-owned subsidiary. The Company plans to transfer all of its nanotechnology assets and appropriate liabilities to such company as a first step in the separation of its nanotechnology product line from its IPTV product. The Company plans to staff AlwaysReady, Inc with a new management team experienced in the nanotechnology area in order to unlock and maximize overall shareholder value. On May 29, 2007, AlwaysReady, Inc announced the hiring of Source Capital Group, an investment banking firm specializing in the raising of private equity, to raise a minimum of $1.5 million in a Private Placement in which the Company would sell up to a 10% interest in AlwaysReady, Inc. to institutional and accredited investors. In addition the Company announced that it planned to eventually transform AlwaysReady, Inc. into a publicly traded company. mPhase plans to retain a 90% interest in Always Ready, Inc. and the shares of common stock of Always Ready, Inc. will be registered on appropriate filings with the SEC under the Securities Act of 1933, as amended, as well as the Securities Exchange Act of 1934, as amended, and listed for trading on the over the counter bulletin board.

12

On April 28, 2007, the Company extended its Development Agreement with Lucent Technologies relating to micro-power source arrays fabricated using nano-textured superhydrophobic materials originally entered into in February of 2004 with Amendment #5 through July 31, 2007.

On May 10, 2007, the Company entered into a Consulting Agreement with CT NanoBusiness Alliance to produce a report and assist the Company with respect to its strategy for development and marketing of its nano power cell product.

On May 11, 2007, the Company entered into an Escrow Agreement with Bitband Technologies, Inc. governing certain payments to be made by the Company to Bitband in connection with certain servers provided and services rendered for the Company’s IPTV product testing.

On June 20, 2007, the Company announced that it is forming a new subsidiary, Granita Media, Inc. (“Granita”), a Delaware corporation, that will provide targeted advertising to users of the TV+ middleware solution. Through the use of specific viewer demographics such as age, gender and defined consumer preferences, the Company believes that a new form of broadcast television advertising could develop that is more powerful and focused than is currently being used by broadcasters. It is believed that targeted advertising software to be developed by Granita will enhance mPhase’s middleware by offering a source of additional revenues for a telephone service provider deploying IPTV. mPhase planed to fund the new company initially through up to $500,000 of equity to be provided by employees and additional outside institutional financing which will involve the sale of up to 10% of the common stock of Granita with mPhase retaining 90% of the stock of Granita. The financing of the new company was unsuccessful and its employees were terminated or resigned between October and December of 2007.

On July 6, 2007, the Company announced that it has executed with Double U. Master Fund, L.P., a limited partnership organized under the laws of the British Virgin Islands, a Private Equity Credit Agreement for an aggregate of up to $6 million in financing through the sale, from time to time, of the common stock of the Company at a 14% discount to its market value (determined as set forth in detail in the Private Equity Credit Agreement). The terms of the Agreement provide that mPhase will have the option to “PUT” up to $300,000 of its common stock to the Partnership per month upon the effectiveness of a Form S-1 Registration Statement covering such shares of common stock. Under the terms of the Agreement, the Company is not obligated to draw any minimum amount of money under the Private Equity Credit Line

On July 18, 2007, the Company announced the award of a Phase I US Army Small Business Technology Transfer (STTR) Program Grant. This award is a Phase I six month research effort to develop a 30 plus year shelf life, low power, green battery (coin cell or similar) that will continuously power a static random access memory circuit for a computer device. SRAM is a common type of digital memory chip used in a wide variety of electronic systems for data storage. During the six month research period, the team will characterize the design, conduct capacity and stability measurements of a reserve style power cell based on Lithium chemistry. Long term stability and shelf life is achieved by initially separating the active materials of the power cell during storage, and controlling the activation of the cell until needed to provide power. This research program extends the design of the company’s smart battery to support the use of non-water based electrolytes that are commonly used in lithium based batteries. Lithium batteries are favored for powering many different types of electronic devices due to their higher voltage and power requirements that can be supplied by more common alkaline batteries. The Phase I grant, valued at $100,000, will enable the Company to competitively compete for a Phase II award as an avenue used by U.S. government defense agencies to adopt advanced technology for commercialization and use. Rutgers University will support the Company and its newly formed subsidiary AlwaysReady, Inc. during the award period as a subcontractor under the award guidelines.

13

On August 21, 2007, the Company announced the acquisition of a 10% stock ownership position in Sovereign Tracking Systems LLC, a company located in New Jersey with a patent covering active, real-time, tracking systems that use radio frequency identification tags to secure high-end personnel tracking and monitoring systems. The Company believes that, although such company faces severe financial challenges, such patent could potentially compliment and enhance the Company’s smart battery application being developed through AlwaysReady, Inc. a wholly-owned subsidiary.

On September 5, 2007, the Company announced that it had made significant progress, pursuant to the requirements of the STTR grant, in developing a prototype of a lithium manganese dioxide prototype of its SmartBattery product.

On October 19, 2007, the Company announced that in connection with the settlement and dismissal of a civil law suit originally filed on November 16, 2005 by the Securities and Exchange Commission in the Federal District Court in the District of Connecticut, the SEC issued a Cease and Desist Order and certain remedial sanctions against two officers of mPhase Technologies, Inc. (the “Company”). The civil suit was filed against Packport.com, Inc. a Nevada corporation, Microphase Corporation, a Connecticut corporation, a company that provides administrative services to the Company and shares common management with the Company, and others. The two officers of the Company were Mr. Ronald A. Durando, President and Chief Executive Officer and Mr. Gustave T. Dotoli, the Chief Operating Officer. The Civil suit by the SEC named as respondents Mr. Durando, Mr. Dotoli and others in connection with their activities as officers and directors of Packetport.com. The cease and desist order from the SEC found that (1) All parties had violated Section 5 of the Securities Act of 1933, as making unregistered offers or sales of Packetport.com common stock. (2) Mr. Durando and Mr. Dotoli had violated Section 16(a) of the Securities Exchange Act of 1934, as amended, and Rule 16(a) thereunder by failing to timely disclose the acquisition of their holdings on Form 3’s and (3) Mr. Durando had violated Section 13(d) of the Securities Exchange Act of 1934, as amended, for failing to disclose the acquisition of more than five percent of the stock of Packetport.com. Under the order Mr. Durando was required to disgorge $150,000 and Mr. Dotoli was required to disgorge $100,000. The Company was not named as a party to the civil suit. More information regarding the detailed terms of the settlement can be found in SEC release No 8858 dated October 18, 2007 promulgated under the Securities Act of 1933 and SEC Release No. 56672 dated October 18,2007 promulgated pursuant to the Securities Exchange Act of 1934. Mr. Durando and Mr. Dotoli have continued to serve as officers and directors of the Company. Mr Durando and Mr. Dotoli together with Microphase corporation and others, without admitting or denying the findings of the SEC, except as to jurisdiction and subject matter, have consented to the entry of the Order Instituting Cease and Desist Proceedings, Making findings and Imposing a Cease and Desist Order and Remedial Sanctions pursuant to Section 8A of the Securities Exchange Act of 1933 and Section 21C of the Securities Exchange Act of 1934.

On October 30, 2007, together with its subsidiary Granita Media, Inc, jointly announced that Comstar/Odessa, a major provider to telecommunications services in the Ukraine, had terminated the trial of the Company’s TV+ solution.

On November 2, 2007, the Company announced the retirement of Mr. Necdet F. Egrul at the age of 84 from the Company’s Board of Directors.

On February 20, 2008, the Company announced that a prototype of its smart reserve nanobattery was successfully deployed and activated by the resulting g force in a gun-fired test at the Aberdeen Proving Grounds in Maryland. The test was conducted by the U.S. Army Armament Research, Development, and Engineering Center (ARDEC) of Picatinny New Jersey. In this test, the AlwaysReady battery delivered power to the test load inside the standard military anti-tank round (M830A1 or HEAT-High Explosive Anti Tank) and demonstrated extreme resiliency, surviving the harsh environment as well as the high acceleration at a g-Force in excess of 45,000 (One “g” is equal to the pull of gravity at sea level). The gun-fired test was part of a prototype evaluation process that the U.S. Army is conducting as part of its CRADA (Cooperative Research and Development Agreement). The Company’s Engineers collaborated with those at Picatinny involved in the development of precision guidance components to successfully package this reserve electrochemical storage system to operate during the gun-firing and flight environment of a very high “g” round. The developmental qualification work, prior to the live test firing, was performed using Picatinny’s air gun test facilities by subjecting battery prototypes to various launch accelerations and various design iterations. The test validated the performance of the AlwaysReady battery with a current armament used by the Army. The Company has stated that its goal is to potentially incorporate this battery technology into smart, gun-fired munitions programs being developed by Picatinny.

14

On May 2, 2008, the Company announced that it had produced its first lithium-based battery that can be manually activated by providing power on command with a significantly longer shelf life prior to initial activation than those found in other batteries. The battery can be activated by command wirelessly from a remote location by a radio frequency signal giving it added mobility for sensor and similar applications.

On September 9, 2008, the Company announced that it had been awarded a Phase II Small Business Technology Transfer Program (STTR) grant, part of the Small Business Innovation Research (SBIR) program, from the U.S. Army for continued development of a reserve Smart NanoBattery for a critical computer memory application.

On September 17, 2008 the Company announced that its breakthrough research in microfluidics on understanding how micro- and nanostructured surfaces could be engineered to have properties for repelling water and other types of liquids potentially used in consumer applications to enable self-cleaning surfaces such as shower doors or windows and other materials used in self-cleaning systems.

On September 23, 2008,the Company announced that it had produced compact reserve lithium battery prototypes with a manually activated breakable separator capable of powering a high-intensity emergency flashlight for more than two hours continuously at full brightness. The work was done in conjunction with Eagle Picher a respected battery design and development firm located in Joplin, Missouri. mPhase stated that it is pursuing the concept of using a reserve battery with a breakable separator in a high-intensity emergency flashlight either as the primary power supply or as a reliable source of backup power. Cylindrical and planar battery and flashlight designs are possible. These flashlights may be equipped with either a krypton bulb or light emitting diode (LED), the choice depending on the required brightness and runtime characteristics. A manually activated breakable separator technology has been created that is analogous to that of the AlwaysReady Smart NanoBattery with the patented electrowettable membrane, both of which keep the liquid electrolyte separate from the solid electrodes until the battery is actually needed. This provides a battery with potentially infinite shelf-life that will not lose power while sitting on the shelf or in storage. Whereas the electrowettable membrane is activated by applying a voltage at the interface between the liquid and membrane surface, the breakable separator is manually activated through a well-defined physical force. The result in both cases is that the liquid electrolyte mixes with the solid electrodes thus releasing the stored energy and 3 volts of power when lithium chemistry is employed.

On December 5, 2008 the Company announced that it had signed a contract with Porsche Design Gesellschaft m.b.H., Flugplatzstrasse 29, A,S700 Zell am see. Austria [“Porsche Design’ Studio”], to design a premium version of the AlwaysReady Emergency Flashlight. The flashlight will use mPhase’s proprietary lithium reserve battery. The battery contains a breakable barrier that separates the solid electrodes from the liquid electrolyte until the battery is manually activated. Unlike traditional batteries, the mPhase battery remains in an inert state with no leakage or self-discharge until activation. The mPhase battery is designed to have an almost infinite shelf life making it ideal for emergency lighting applications. The premium flashlight will be marketed as an accessory for automobile roadside emergency kits.

On January 15, 2009 the Company announced that its SmartNanoBattery being developed pursuant to a Phase II Army Grant for a critical mission computer backup reserve battery may also have wider application for unattended electronic ground sensors that provide mission critical information for military operatives.

15

On January 29, 2009 the Company announced that it had contracted EaglePicher Technologies to manufacture the reserve battery that will be used in its emergency flashlight. EaglePicher was selected for the project because of their experience in custom and standardized power solutions for the extreme environments of aerospace and military applications as well as medical and commercial applications.

On March 9, 2009,in reaction to the new Economic Stimulus Plan, the Company announced that it will pursue funding opportunities arising from the $2 billion allocated for advanced battery technology. The mPhase/AlwaysReady Smart NanoBattery has the potential to impact new energy efficient vehicle applications. Eligibility for the $2 billion in competitive grants to support manufacturing advanced vehicle batteries and components is to be determined by the Department of Energy, with a final decision made by the Office of Energy Efficiency and Renewable Energy. Under the Economic Stimulus Plan the Department of Energy must provide facility funding awards to manufacturers of advanced battery systems and vehicle batteries produced in the United States, including advanced lithium ion batteries, hybrid electrical systems, component manufacturers, and software designers. The Company believes that a rechargeable version of the Smart NanoBattery can be designed with lithium ion chemistry for a wide range of energy-efficient applications.

On March 17, 2009 the Company announced that, effective March 13, 2009, it entered into a Settlement Agreement with Magpie Telecom Insiders, Inc. (“Magpie”) of a lawsuit filed by Magpie against the Company in November 2007 in the Federal District Court for the District of Colorado. Neither party made any admission of liability in connection with the settlement. As a result of the settlement the Company will remove from its liabilities $175,000 in Accounts Payable and cancel 1,926,470 shares of its common stock issued to Magpie and returned under the settlement to the Company. The terms of the settlement otherwise resulted in no material change in circumstances to the Company.

On March 18, 2009, the Company announced that it had received the first working model for the Emergency Flashlight from the Porsche Design Studio in Zell am See, Austria representing a major step forward as the Company prepares for the initial product launch.

On June 23, 2009, the Company announced that it had achieved a major milestone in the development of its Smart NanoBattery Technology. mPhase reported that it has successfully manufactured a six-inch silicon-based wafer containing its key membrane (separator) technology. This separator is responsible for keeping the Smart NanoBattery’s chemicals separated until activated. The membrane’s unique surface and structure allows for control of a liquid on a nanostructured surface.

On August 5, 2009, the Company announced that it had completed the first functional prototype of its lithium Reserve Battery that will function in the Company’s emergency flashlight. The prototype is the first time the mPhase battery technology has come together in a “ready for production” prototype. The mPhase lithium reserve battery stores energy until it is literally “turned on.” It is manually activated by a unique triggering mechanism that rapidly releases and distributes the liquid electrolyte inside the battery. The electrolyte immediately contacts the solid electrode materials to produce 3 volts. The reserve battery is designed for backup power and emergency applications. With a shelf life of over 20 years, the mPhase lithium reserve battery will allow the its emergency flashlight to function as a reliable emergency light source in countless situations.

On August 6, 2009, the Company announced that it had completed the first fully functional prototype of its emergency flashlight. A world renowned automobile design firm created a sleek design to accompany the flashlight’s unparalleled functionality. The new illuminator features mPhase’s first reserve battery that allows for backup power to be always ready through a simple activation method.

On August 27, 2009 the Company announced that its Phase II grant from the United States Army had been renewed for a second year.

16

Products & Services

Since our inception in 1996, mPhase has been a development stage company focused on the development of intellectual property involving high technology innovative solutions and products with high-growth potential. The Company has served as an incubator for exploratory research and initial development for products that are best characterized as having a high risk/high reward profile since they involve exploratory research to achieve significant scientific breakthroughs from existing products that can have a substantial economic impact and benefit upon successful commercialization.

NanoBattery

The Smart NanoBattery is an outgrowth of the science of nanotechnology that the Company began in February of 2004 with the entering into a Project Development Agreement with the Bell Labs Division of Lucent Technologies, Inc. The Company has historically outsourced its Research and Development of new products to larger companies or institutions with significant scientific resources and experience in exploratory research. mPhase Technologies along with Alcatel/Lucent/Bell Labs, jointly conducted research from February 2004 through April of 2007 that demonstrated control and manipulation of fluids on superhydrophobic surfaces to create power cells, by controlling wetting behavior of electrolyte on nano structured electrode surfaces. This scientific research conducted set the ground work for continued exploration in the development of intelligent nanotechnology power cells (nano-batteries), and formed a path to commercialization of the technology for a broad range of market opportunities. During 2005 and 2006, the battery team tested modifications and enhancements to the internal design of the battery to optimize its power and energy density characteristics, as well as engineering improvements that were essential in moving the battery from a zinc based chemistry to design using lithium based chemistry The Company established a strategic research working relationship with the Energy Storage Research Group (ESRG), a center of excellence in Rutgers University that has lab research facilities capable of handling lithium based battery development.

mPhase’s current flagship product is its Smart NanoBattery that has a significant longer shelf life prior to initial activation than that of conventional batteries. The Smart NanoBattery has potentially significant applications for critical mission power sources that must be reliable and available upon command by the electronic device it is powering. Such applications involve, emergency flashlights and beacons, back -up power sources for computers and life support products, as well as significant military applications where critical mission backup power is essential for weapons control computers and electronic warfare equipment used in combat. Other potential military applications include power sources activated by g forces for guided munitions.

The Smart NanoBattery utilizes a proprietary technology developed over a period of 5 years. The battery design, prior to initial activation, has a membrane that separates the electrolyte and electrodes used to generate power. Conventional batteries do not provide for such separation and therefore their power begins to dissipate prior to the first time they are activated causing them to loose capacity. Conventional batteries have significant limits upon how long they can be stored prior to their first activation and in providing a reliable source of power required for critical applications requiring portable power supplies.

Emergency Flashlight

In April of 2008 mPhase successfully produced its first lithium-based breakable separator. This provided the basis of a new reserve battery product that relies on mechanical rather than electrical activation to provide Power on Command. In contrast to the Company’s SmartNanoBattery product that is being developed using the science of nanotechnology and relies on an electro wetting membrane, this reserve battery is designed for mechanical rather than electrical activation. Such reserve battery is based upon an innovative mechanical and battery engineering design involving that is activated by puncturing a soft pouch containing electrolyte. Such reserve battery has been especially designed to be used in the Company’s new emergency flashlight product. Such reserve battery is being designed for the Company by Eagle Picher, a major U.S. battery designer and the flashlight is being designed for the Company by Porsche Design Studio.

17

Magnetometer: Further Development Suspended in 2007 (See also description of operations)

In March of 2005, the Company engaged the Bell Labs division of Lucent Technologies, Inc. to develop, using the science of nanotechnology both a low and high sensitivity magnetometer for both military and commercial use.

Magnetometers can be used in a wide range of applications for the detection of magnetic fields in applications that include military surveillance, securing the retail environment, automotive sensors and actuators, industrial processing, medical imaging, scientific measurements, detection of mineral deposits and even air and space exploration. In sensor networks ultra-sensitive magnetometers can be used, for example, to detect and accurately pinpoint battlefield objects or they might also be used to study the workings of the human brain.

Magnetometers work by sensing changes in magnetic fields due to the motion of magnetic objects or changes in electrical currents generated by those objects. The magnetometer detects these objects by measuring time-varying magnetic signals that are superimposed on the combination of earths background field used to orient compasses) and static magnetic fields due to near- by magnetic objects. In March of 2007, the Company ceased development with Alcatel/Bell Labs of its Magnetometer product in order to conserve financial resources.

TV+ Solution: Further Development Suspended in 2007(See also description of operations)

As mentioned previously, the roll-out of broadcast television using internet protocol has been a lengthy process for major service providers in the United States, the Company has suspended in November of 2007 development of new features for its TV+ solution in order to conserve financial resources pending further development in the U.S. market. All inventories have been written off and all strategic alternatives relative to this business segment, including the sale or licensing of the intellectual property are being evaluated.

Competitive Business Conditions

Battery Segment

The design and functionality of the mPhase/AlwaysReady lithium Smart Nanobattery make it unique to the portable electronics battery market segment.. To the best of our knowledge, there is no existing product that directly competes with the Smart NanoBattery that combines small size with a reserve design. As a reserve battery, the Smart NanoBattery remains dormant until it is activated on command. It does not self-discharge or die prior to its first activation, thereby offering extremely long shelf life prior to use as either as a primary or backup battery in a device. Shelf life is projected to be in excess of twenty years.

There are numerous thin film batteries based on lithium metal, lithium ion and lithium polymer, as well as other chemistries, used in military devices, portable electronics, RFID tags and wireless sensor networks, that are similar in size to the Smart NanoBattery, often referred to as microbatteries. None of these designs are based on reserve battery architectures. Thin film batteries are manufactured by companies including: Cymbet Corporation, Front Edge Technology, Infinite Power Solutions, ITN Energy Systems, Johnson Research and Development Company, KSW Microtec, Lithium Technology Corporation, MPower Solutions, Oak Ridge Micro-Energy, Power Paper, Solicore, VoltaFlex Corporation. Large companies such as Energizer, Ultralife, Varta and Proctor & Gamble are also involved with developing thin film batteries. Thin film battery markets are anticipated to reach 10 billion units, $11 billion dollars by 2012. The market driving forces are those of wide expansion of portable devices in that time frame. With 3.5 billion cell phone users and 67 billion RFID tags per year anticipated in that time frame alone, it is anticipated that the volumes will be in place to create commercial demand for thin film batteries.

18

Traditional reserve batteries are quite distinct from the mPhase/AlwaysReady Smart NanoBattery in terms of size and activation mechanism. The market for reserve batteries has largely been limited to the military for supplying power to munitions and other mission-critical electronic devices. The traditional reserve battery tends to be larger and certain types are built by hand and contain mechanical parts to activate the battery. The Smart NanoBattery relies on the phenomenon of electrowetting to initiate activation or a mechanical barrier that can be broken, in the case of the breakable barrier design. Traditional reserve batteries for military applications have been supplied by companies such as EaglePicher, Yardney and Storage Battery Systems, Inc.

Flashlight Market

The Company believes that there may be a significant market for a high-end emergency flashlight containing its mechanically activated reserve battery. The need for absolute reliability in many emergency situations includes those of fire, police and other emergency service providers. In addition to providing an emergency light source, when needed, the Flashlight being developed with such lithium reserve battery will have a port capable, in the alternative to providing light, of recharging a cellular telephone produced by Porsche Design Studio as well as those of other major cellular telephone providers. Since the market for new and innovative portable electronic batteries continues to expand, especially in the field of wireless hand-held devices, the Company believes that its emergency flashlight and reserve battery may benefit significantly from such trend.

Outsourcing

Research and Development

The Company practices an outsourcing model whereby it contracts with third party vendors to perform research and development rather than performing the bulk of these functions internally. For current development of its Flashlight and Reserve Battery, the Company has outsourced the majority of the work It also maintains a small core R/D staff of engineers and scientists in the fields critical for the battery development. From February of 2004 through March of 2007 the Company engaged Lucent/Bell Labs to develop, using the science of nanotechnology, micro power cell arrays creating a structure for zinc batteries that separated the chemicals or electrolytes prior to initial activation. This was done by suspending on nano grass or small spoke like pieces of silicon a liquid electrolyte taking advantage of a super hydrophobic effect that occurs as a result of the ability to manipulate materials of a very small size or less that 1/50,000 the size of a human hair. The Company has, as a result of outsourcing, been able to have access to facilities, equipment and research capabilities that the Company would not be able to develop on its own given the financial resources and time that would be required to build or acquire such research capabilities. The Company has also been able to achieve key strategic alliances with the U.S. Army to successfully test, under military combat conditions, its SmartBattery design, leading to further validation of its path to product development under a Cooperative Research and Development Agreement (CRADA). In addition the Company has formed a relationship with Energy Storage Research Group, a center of excellence at Rutgers University, in New Jersey, that has enabled the Company to expand its battery development from a zinc to a lithium battery capable of delivering significantly more power. During the period from March of 2005 to April of 2007, the Company engaged the Bell Labs division of Lucent Technologies, Inc. to develop a magnetometer or electronic sensor also using the science of nanotechnology. Although the Company has, in order to conserve financial resources, currently suspended further development of its magnetometer product line, we believe that the intellectual property developed from the research to date could be resumed to develop viable military and industrial products depending upon future financial resources of the Company and future competitive market conditions.

19

Prototype Development

As the Company has moved from development to commercialization of its Emergency Flashlight products utilizing its mechanically activated reserve battery, the Company has outsourced the creation of prototypes to Porsche Design Studio in December of 2008 and MKE, a mechanical design company in Austria that works closely with them. The reserve battery prototype development work has been outsourced to Eagle Picher in early 2009. The Company has engaged Microphase Corporation, a related party under contract for project management and testing of its new Emergency Flashlight and the Reserve Battery used in such Flashlight at a cost of $50,000 per month for 6 months beginning April 1, 2009 and ending on September 30, 2009. Such parties are currently negotiating for a renewal of such contract.

Manufacturing

mPhase subcontracts all of the manufacturing of its products to outside sources including related parties such as Microphase Corporation. During the fiscal year ended June 30, 2009, the Company did not have any contract for manufacturing its products with outside sources. From April 1, 2009 through August 31, 2009 we paid $50,000 per month to Microphase for project management services in connection with development of the Company’s flashlight with Porsche Design Studio and the concurrent development of its mechanically-activated reserve battery by Eagle Picher. The Company believes that such payments are the same as would be charged by other management services provided by non-affiliated third party providers of such services. By using contract manufacturers, mPhase avoids the substantial capital investments required for internal production.

Patents and Licenses

We have filed and intend to file United States patents, in some cases EU patents and/or copyright applications relating to some of our proposed products and technologies, either with our collaborators, strategic partners or on our own. There can be no assurance; however, that any of the patents obtained will be adequate to protect our technologies or that we will have sufficient resources to enforce our patents.

Because we may license our technology and products in foreign markets, we may also seek foreign patent protection for some specific patents. With respect to foreign patents, the patent laws of other countries may differ significantly from those of the United States, as to the patentability of our products or technology. In addition, it is possible that competitors in both the United States and foreign countries, many of which have substantially greater resources and have made substantial investments in competing technologies, may have applied for, or may in the future apply for and obtain, patents, which will have an adverse impact on our ability to make and sell our products. There can also be no assurance that competitors will not infringe on our patents or will not claim that we are infringing on their patents. Defense and prosecution of patent suits, even if successful, are both costly and time consuming. An adverse outcome in the defense of a patent suit could subject us to significant liabilities to third parties, require disputed rights to be licensed from third parties or require us to cease our operations.

The Company has intellectual property as follows:

Nano Technology, Micro Electrical Mechanical Systems (MEMS) and Battery Portfolio:

The Company has applied for seven (7) patent applications in the area of battery designs, microfludics and MEMS fabrication. In addition, the Company has two (2) joint patent applications with the Bell Labs division of Lucent Technologies, obtained during the development period, and the licensing rights for use of five (5) additional patents from Lucent after the development period.

20

Other Patents

On July 12, 2005, mPhase announced that it had been granted a U.S. patent that covers a series of techniques for splitting different voice and data signals in DSL access networks that is used in its Broadband Loop Watch product. The Company is not currently pursuing further development and marketing of this product owing to the lack of demand for loop diagnostics systems by telephone service providers.

In July of 2009, the Company filed for 3 new patents covering the unique design features of its manually-activated lithium reserve battery and emergency flashlight products.

We also rely on unpatented proprietary technology, and we can make no assurance that others may not independently develop the same or similar technology to ours or otherwise obtain access to our unpatented technology.

Government Regulation

The Federal Communication Commission, or FCC, and various state public utility and service commissions, regulate most of mPhases potential domestic customers for our TV+ product. Since our further development of our IPTV product and sales efforts have been temporarily suspended, the regulation by the FCC of providers of communications services is currently not of great significance to the Company or its overall financial condition and strategy going forward. To the best of our knowledge, there is no federal or state or local laws to which we are subject that are relevant to our TV+ product as middleware from a regulation and certification standpoint.

Changes in current or future laws or regulations, in the U.S. or elsewhere, could materially adversely affect the Company's business.

Research and Development

mPhase designed the legacy Traverser Digital Video Data Delivery System (DVDDS) product to delivery broadcast television, high-speed internet and voice to customers of telephone service providers. The digital engineering and design was developed primarily on an outsourced basis through Georgia Tech Research Corporation with analog portions of the product developed by Microphase Corporation. As of June 30, 2009, we had been billed a cumulative total of approximately $13,563,000 for research and development conducted by Georgia Tech Research Corporation.

mPhase originally contracted with the Bell Labs division of Lucent Technologies, Inc. in fiscal year 2002 to reduce the cost of its INI set top box used with the Traverse r DVDDS platform. During fiscal year 2003, the Company engaged Lucent to develop an integrated system with the Lucent Stinger DSLAM and mPhase middleware for the delivery of Television, high speed internet and voice on an open standards system to replace the proprietary Traverser product. Releases 1.0 and 2.0 of the TV+ solution were designed by Bell Labs to be ATM systems that operated exclusively with the Lucent Stinger DSLAM to enable a telecommunications service provider to deliver broadcast television, voice and high speed internet over DSL.

Release 3.0 of our TV+ system that replaced the ATM protocol that was used in prior releases of the TV+ uses internet protocol and is referred to as out IPTV solution. It was completed during May of 2006 by the Bell Labs division of Alcatel/Lucent Technologies, Inc. under a contract extended in August of 2005. We have not renewed our contract for software development of our TV+ product with Bell Labs. In the aggregate we have paid Bell Labs approximately $4.9 million our TV+ solution.

21

Since 2006 major vendors of further software development for the TV+ included Velankani Communications (the successor to Bell Labs as systems integrator of the TV+), Magpie Telecom Insiders, Inc, Espial Telecommunications, Inc. As of June 30, 2008 we have been billed a cumulative total of approximately $3.2 million for research and development for our TV+ from these vendors. During the fiscal year ended June 30, 2008 such activity was suspended. The Company is currently in disputes with several of its vendors in connection with its TV+ solution regarding the failure of such vendors of deliver certain aspects of its TV+ software that are not, in the Company’s opinion of carrie r class quality.

From March of 2005 through March of 2007, the Company had also engaged Bell Labs in under separate Development Agreements for the development of a new generation of ultra magnetic sensors (magnetometers) using the science of nanotechnology with a total cost of $2.4 million. The Company did not renew such its engagement with Bell Labs upon expiration and did not incur any costs with respect to its magnetometer in fiscal year 2008 since the Company has suspended further development of the product to conserve financial resources.

Our SmartNanoBattery and power cell technology research and development was performed by the Bell Labs division of Alcatel/Lucent from February of 2004 through March o f 2007 at an aggregate cost of $3.8 million. The Company paid Bell Labs $300,000 covering the period from April 27, 2007 through July 30,2007 at which time it determined that in order to develop a lithium battery for higher density energy than zinc, it required facilities capable of handling lithium battery research that Bell Labs does not have. The Company has engaged a number of small foundries during fiscal year ended June 30, 2008 for commercialization of its SmartNanoBattery at a cost of approximately $150,000. In fiscal year ended June 30, 2009 the Company engaged Eagle Picher at a cost of $75,000 to design and engineer a prototype of its manually-activated lithium reserve battery and Posche Design studio at a cost of $79,123 for design of its emergency flashlight product. In addition, the Company has secured a Co-Branding Agreement with Porsche Design Studio for its emergency flashlight product. During the fiscal year ended June 30, 2009, the Company engaged Silex, a silicon foundry in Sweden, at a cost of $21,200 for further development of its SmartNanoBattery.

Employees

mPhase and its subsidiary companies presently have a total of 9 full-time employees and consultants, two of whom are also employed by Microphase Corporation. See the description in the section entitled Certain Relationships and Related Transactions.

22

RISK FACTORS

RISKS RELATED TO FINANCIAL ASPECTS OF OUR BUSINESS

The Company has been forced to curtail development of all products except its SmartBattery and Emergency Flashlight in order to conserve financial resources

The Company has currently been forced to focus exclusively on commercialization of only one of its products thereby eliminating product diversification. The Company’s lack of financial resources to simultaneously develop multiple products increases its overall risk profile as a development-stage company.

mPhase’s stock price has suffered significant declines during the past eight years and remains volatile.

The market price of our common stock closed at $7.88 on July 26, 2000 and closed at $.028 on August 14, 2009. During such period the number of shares outstanding of the Company increased from approximately 30 million shares to 900 million shares. Such increase was the result of periodic private placements by the Company in order to finance company operations. Stocks in micro cap companies having stock values below $1.00 per share been very volatile during such period. Our common stock is a highly speculative investment and is suitable only for such investors with financial resources that enable them to sustain the loss of their entire investment in such stock. Because the price of our common stock is less than $5.00 per share and is not traded on the NASDAQ National or NASDAQ Small Cap exchanges, it is considered to be a “penny stock” limiting the type of customers that broker/dealers can sell to. Such customers consist only of “established customers” and “Accredited Investors” (within the meaning of Rule 501 of Regulation D of the Securities Act of 1933, as amended-generally individuals and entities of substantial net worth) thereby limiting the liquidity of our common stock.

We may not be able to raise sufficient capital to meet bring our SmartNanoBattery and Emergency Flashlight and other applications of our technology to market.

We may not be able to obtain the amount of additional capital needed until the Company has established a significant and predictable sales and revenues from our technology. We have been successful in the past as a micro-cap development stage company in raising capital; however recent trends in the capital markets are likely to pose significant challenges for the Company. Factors affecting the availability of capital include:

We have reported net operating losses for each of our fiscal years from our inception in 1996 through the fiscal year ended June 30, 2009 and may not be able to operate profitability in the future.

23

We have had net losses of approximately $188 million since our inception in 1996 including approximately $15.5 million and $3.9 million for the fiscal year ended June 30, 2009 and June 30, 2008, respectively and cannot be certain when or if we will ever be profitable. We expect to continue to have net losses for the foreseeable future and have a need to raise not less than $5 million in additional cash in the next 12 months through further equity private placements and existing convertible debt arrangements to continue operations. As of June 30, 2009 we have negative working capital of approximately $3.9 million and a stockholders deficit of $5.0 million. Cumulative negative cash flow from operations since inception has amounted to approximately $82.3 million

Economic support from affiliated companies has been significant.

During the downturn in the telecommunications industry beginning in 2001, both Microphase Corporation, and Janifast Ltd. provided significant financial support to mPhase in the form of either cash infusions or conversions of related party debt. Janifast Ltd shut down its operations in March of 2009 owing to its financial condition and is currently being liquidated. Such companies, which share common management with mPhase, are under no legal obligation to and may not be able to sustain such economic support of mPhase in the future should such support be necessary.

Our independent auditor’s report expresses doubt about our ability to continue as a going concern.

The reports of the Company’s outside auditors, Rosenberg, Rich, Baker, Berman & Company and its prior auditors Arthur Andersen & Co. with respect to its latest audited 10K for each of the fiscal years commencing in the fiscal year ended June 30, 2001 through the current fiscal year ended June 30, 2009, stated that “there is substantial doubt of the Company’s ability to continue as a going concern.” Such opinion from our outside auditors makes it significantly more difficult and expensive for the Company to raise additional needed capital necessary to continue our operations.

Our common stock is subject to significant dilution upon issuance of shares we have reserved for future issuance.

As of June 30, 2009 outstanding convertible debt plus accrued interest is equal to $3,437,750 all of which has the right to convert into additional shares of our common stock at discounts of up to 25% of mPhase’s then current stock price computed on a formula basis that may adversely affect the future price of our common stock. As of June 30, 2009 we have warrants and options convertible into 286,376,646 shares of our common stock at $.05 per share or less that, upon exercise may result in significant future dilution to many of our current shareholders and may adversely affect the future price of our common stock. We may be forced to raise additional cash for operations by selling additional shares of our common stock to shareholders at depressed prices resulting in further dilution to our shareholders.

RISK FACTORS RELATED TO OUR OPERATIONS

We have been a development-stage company since our inception in 1996 and have not to date had a significant or successful deployment of any of our flagship product including our SmartBattery and our Reserve Flashlight products.

We have derived no material revenues from our SmartBattery from inception of development in February 2004 through June 30, 2009 or the Emergency Flashlight and we have been forced to discontinue further product development and marketing of both our TV+ and Magnetometer products owing to limited financial resources.

The loss of key personnel could adversely affect our business

Management and employment contracts with all of our officers have expired and no assurances can be given that such executives will remain with the Company or that the Company will be able to successfully enter into agreements with such key executives. All of our officers have made significant investments in the Company in the form of equity periodic purchases of common stock and bridge loans and been granted stock and stock options that are intended to represent a key component of their compensation. Such grants may not provide the intended incentives to such officers if our stock price declines or experiences significant volatility.

24

We may incur substantial expenditures in the future in order to protect our intellectual property.

We believe that our intellectual property with respect to our SmartNanoBattery and our proprietary rights with respect to the Company’s permeable membrane design consisting of both micro and nano scale silicon features, that are coated with a monolayer chemistry used to repel liquids is critical to our future success. We have four patents pending with respect to our SmartNanoBattery product and 3 partents pending with respect to our Emergency Flashlight and the reserve battery it utilizes in order to protect our product, however no patents have yet been granted. Our pending patent applications may never be granted for various reasons, including the existence of conflicting patents or defects in our applications. Even if a U.S. patent is ultimately granted there are significant risks regarding enforcement of patents in international markets. There are many patents being filed as the science of nanotechnology develops and the Company has limited financial resources compared to large, well established companies, in order to bring patent litigation based upon claims of patent infringement.

RISKS RELATED TO OUR TARGETED MAKETS

The sale of new high technology products often has a long lead-time and a multiplicity of risks.

Commercialization of new technology products often have very long lead time since it is not possible to predict when major companies will license such technology for sale to their customers. The Science of Nanotechnology and Microfluidics used to develop our SmartNanoBattery is in its very early stages and acceptance and demand for such products can often be a long evolutionary process. In the case of the Company’s IPTV solution the roll-out of delivery of broadcast television by telephone service providers using internet protocol has taken 10 years to develop and is still moving slowly which has resulted in the Company currently delaying any further development of such product to conserve financial resources.

The science of nanotechnology is at a very early stage as a discipline and is subject to great uncertainty and swift changes in technology.

Micro fluid dynamics and the manipulation of materials of nano size and dimensions is a very new science and the creation of new products is dependent upon new and different properties of such materials created that will result in many uncertain applications and rapid change. The evolution of nanotechnology as a new science adds greater uncertainty to new applications and new and improved product introductions is unpredictable.

We may not be able to create new products from our intellectual property using microfluidics that will be acceptable in water purification, oil separation from water and other environment markets.

The market for “green” products and solutions is characterized by: Changing regulatory standards; New and improved product introductions and Changing customer demands;

Large companies such as Exxon with great resources that are currently focusing significant monies for new solutions.

Our future success will depend upon our ability to achieve compelling technology innovations that are economic and practical to produce in large quantities. Success in new technology, products and services is a complex and uncertain process requiring high levels of innovation, highly-skilled engineering and development personnel, and the accurate anticipation of technological and market trends. We may not be able to identify, develop, market or support new or enhanced technology, products, or services on a timely basis, if at all owing to our size and limited financial resources.

25

The commercialization of many applications of our technologies will depend on our ability to establish strategic relationships with commercial partners.

We are seeking commercial partners with established lines of business and greater financial resources than our own. Such partners may not place the priority that we do on joint projects because the success or failure of such projects is not as material to other existing well developed lines of business.

Our SmartBattery and our potential applications of our technology are components of end products and therefore the products are tied to the success of such products

The compelling need for critical mission batteries and other applications of our nanotechnology will depend upon both military and commercial needs going forward and the demand for our products as components. Thus are SmartBattery and other applications of our technology success will depend upon the continuing need for the end user products over which will depend upon market demand.