The selected consolidated financial data for the fiscal years set forth in the table below have been derived from our consolidated financial statements and notes thereto. The selected consolidated statement of operations data for fiscal years 2014 and 2013, and the selected consolidated balance sheet data at December 31, 2014 and 2013, have been derived from our audited consolidated financial statements and notes thereto set forth elsewhere in this Form 20-F. The selected financial data should be read in conjunction with our consolidated financial statements, and are qualified entirely by reference to such consolidated financial statements.

(in thousands except net loss per share data)

(in thousands)

The following table sets forth our capitalization as of June 30, 2015. You should read this information together with our financial statements and the related notes and with “Item 5. Operating and Financial Review and Prospects” appearing elsewhere in this registration statement on Form 20-F.

Not applicable.

You should carefully consider the risks described below, together with all of the other information in this registration statement on Form 20-F. The risks described below are not the only risks facing us. Additional risks and uncertainties not currently known to us or that we currently deem to be immaterial may also materially and adversely affect our business operations. If any of these risks actually occurs, our business and financial condition could suffer and the price of our ADSs could decline.

Risks Related to Our Business and Industry

Our future success depends in part on our ability to retain our executive officers and to attract, retain and motivate other qualified personnel.

We are highly dependent on Amit Dror, our Chief Executive Officer, Simon Anthony-Fried, our Chief Marketing Officer, Sharon Fima, our Chief Technology Officer and Dagi Shahar Ben-Noon, our Chief Operating Officer. The loss of their services without a proper replacement may adversely impact the achievement of our objectives. Messrs. Dror, Fried, Ben-Noon and Fima may leave our employment at any time subject to contractual notice periods, as applicable. Recruiting and retaining other qualified employees, consultants, and advisors for our business, including scientific and technical personnel, will also be critical to our success. There is currently a shortage of skilled personnel in our industry, which is likely to continue. As a result, competition for skilled personnel is intense and the turnover rate can be high. We may not be able to attract and retain personnel on acceptable terms given the competition in the industry in which we operate. The inability to recruit and retain qualified personnel, or the loss of the services of our executive officers, without proper replacement, may impede the progress of our development and commercialization objectives.

We depend entirely on the success of our current products in development, and we may not be able to successfully introduce these products and commercialize them.

We have invested almost all of our efforts and financial resources in the research and development of our products in development. As a result, our business is entirely dependent on our ability to complete the development of, and to successfully commercialize, our Dragonfly 3D printer and ink products. The process to the development and commercialization is long, complex, costly and uncertain of outcome.

We may not be able to introduce products acceptable to customers and we may not be able to improve the technology used in our current systems in response to changing technology and end-user needs.

The markets in which we operate are subject to rapid and substantial innovation and technological change, mainly driven by technological advances and end-user requirements and preferences, as well as the emergence of new standards and practices. Even if we are able to complete the development of our Dragonfly 3D printer, our ability to compete in the 3D printing and PCB markets will depend, in large part, on our future success in enhancing our existing products and developing new 3D printing systems that will address the increasingly sophisticated and varied needs of prospective end-users, and respond to technological advances and industry standards and practices on a cost-effective and timely basis or otherwise gain market acceptance.

Even if we successfully introduce our existing products in development, it is likely that new systems and technologies that we develop will eventually supplant our existing systems or that our competitors will create systems that will replace our systems. As a result, any of our products may be rendered obsolete or uneconomical by our or others’ technological advances.

We rely on highly-skilled technical personnel and if we are unable to attract, retain or motivate key personnel or hire qualified personnel, we may not be able to grow or our business may contract, which would have a material adverse effect on our results of operations and financial condition.

Our performance is largely dependent on the talents and efforts of highly-skilled individuals, particularly our printing-system engineers, nanotech chemists, electrical engineers, software engineers, mechanical engineers and computer professionals. Our future success depends on our continuing ability to identify, hire, develop, motivate and retain highly-skilled personnel and, if we are unable to hire and train a sufficient number of qualified employees for any reason, we may not be able to implement our current initiatives or grow, or our business may contract and we may lose market share. Moreover, certain of our competitors or other technology businesses may seek to hire our employees. There is no assurance that any equity or other incentives that we grant to our employees will be adequate to attract, retain and motivate employees in the future. If we do not succeed in attracting, retaining and motivating highly qualified personnel, our business will suffer.

We may not be able to successfully manage our planned growth and expansion.

We expect to continue to make investments in our Dragonfly 3D printer in development and our related ink products. We expect that our annual operating expenses will continue to increase as we invest in sales and marketing, research and development, manufacturing and production infrastructure, and develop customer service and support resources for future customers. Our failure to expand operational and financial systems timely or efficiently could result in operating inefficiencies, which could increase our costs and expenses more than we had planned and prevent us from successfully executing our business plan. We may not be able to offset the costs of operation expansion by leveraging the economies of scale from our growth in negotiations with our suppliers and contract manufacturers. Additionally, if we increase our operating expenses in anticipation of the growth of our business and this growth does not meet our expectations, our financial results will be negatively impacted.

If our business grows, we will have to manage additional product design projects, materials procurement processes, and sales efforts and marketing for an increasing number of products, as well as expand the number and scope of our relationships with suppliers, distributors and end customers. If we fail to manage these additional responsibilities and relationships successfully, we may incur significant costs, which may negatively impact our operating results. Additionally, in our efforts to be first to market with new products with innovative functionality and features, we may devote significant research and development resources to products and product features for which a market does not develop quickly, or at all. If we are not able to predict market trends accurately, we may not benefit from such research and development activities, and our results of operations may suffer.

As our future development and commercialization plans and strategies develop, we expect to need additional managerial, operational, sales, marketing, financial and legal personnel. Our management may need to divert a disproportionate amount of its attention away from our day-to-day activities and devote a substantial amount of time to managing these growth activities. We may not be able to effectively manage the expansion of our operations, which may result in weaknesses in our infrastructure, operational mistakes, loss of business opportunities, loss of employees, and reduced productivity among remaining employees. Our expected growth could require significant capital expenditures and may divert financial resources from other projects, such as the development of additional new products. If our management is unable to effectively manage our growth, our expenses may increase more than expected, our ability to generate and/or grow revenue could be reduced, and we may not be able to implement our business strategy.

Our operating results and financial condition may fluctuate.

Even if we are successful in introducing our products to the market, the operating results and financial condition of our company may fluctuate from quarter to quarter and year to year and are likely to continue to vary due to a number of factors, many of which will not be within our control. If our operating results do not meet the guidance that we provide to the market place or the expectations of securities analysts or investors, the market price of our Ordinary Shares will likely decline. Fluctuations in our operating results and financial condition may be due to a number of factors, including those listed below and those identified throughout this “Risk Factors” section:

Due to all of the foregoing factors, and the other risks discussed in this registration statement on Form 20-F, you should not rely on quarter-to-quarter comparisons of our operating results as an indicator of our future performance.

The markets in which we participate are competitive. Even if we are successful in completing the development of our Dragonfly 3D printer, our failure to compete successfully could cause any future revenues and the demand for our products not to materialize or to decline over time.

We aim to compete for customers with a wide variety of manufacturers that create PCBs. Our principal current competition consists of companies that produce prototype PCBs by traditional reductive manufacturing means, which include etching, pressing and drilling. Many of these companies have extensive track records and relationships within the electronics industry. While we are not aware of any other company that currently offers an in-house 3D printer that is capable of printing multi-layer PCBs, there are a large number of companies engaged in additive manufacturing and 3D printing solutions.

Many of our current and potential competitors have longer operating histories and more extensive name recognition than we have and may also have greater financial, marketing, manufacturing, distribution and other resources than we have. Current and future competitors may be able to respond more quickly to new or emerging technologies and changes in end-user demands and to devote greater resources to the development, promotion and sale of their products than we can. Our current and potential competitors may develop and market new technologies that render our existing or future products obsolete, unmarketable or less competitive (whether from a price perspective or otherwise). We cannot assure you that we will be able to maintain a competitive position or to compete successfully against current and future sources of competition.

Defects in products could give rise to product returns or product liability, warranty or other claims that could result in material expenses, diversion of management time and attention, and damage to our reputation.

Even if we are successful in introducing our products to the market, our products may contain undetected defects or errors that, despite testing, are not discovered until after a product has been used. This could result in delayed market acceptance of those products, claims from distributors, end-users or others, increased end-user service and support costs and warranty claims, damage to our reputation and business, or significant costs to correct the defect or error. We may from time to time become subject to warranty or product liability claims that could lead to significant expenses as we need to compensate affected end-users for costs incurred related to product quality issues.

This risk of product liability claims may also be greater due to the use of certain hazardous chemicals used in the manufacture of certain of our products. In addition, we may be subject to claims that our 3D printers have been, or may be, used to create parts that are not in compliance with legal requirements.

Any claim brought against us, regardless of its merit, could result in material expense, diversion of management time and attention, and damage to our reputation, and could cause us to fail to retain or attract customers. Currently, we do not maintain product liability insurance, which will be necessary prior to the commercialization of our products. It is likely that any product liability insurance that we will have in the future, will be subject to significant deductibles and there is no guarantee that such insurance will be available or adequate to protect against all such claims, or we may elect to self-insure with respect to certain matters. Costs or payments made in connection with warranty and product liability claims and product recalls or other claims could materially affect our financial condition and results of operations.

If our relationships with suppliers for our products and services, especially with single source suppliers of components of our products, were to terminate or our manufacturing arrangements were to be disrupted, our business could be interrupted.

We purchase component parts and raw materials that are used in our Dragonfly 3D printer and ink products from third-party suppliers, some of whom may compete with us. While there are several potential suppliers of most of these component parts and raw materials that we use, we currently choose to use only one or a limited number of suppliers for several of these components and materials. Our reliance on a single or limited number of vendors involves a number of risks, including:

In addition, we require any new supplier to become “qualified” pursuant to our internal procedures. The qualification process involves evaluations of varying durations, which may cause production delays if we were required to qualify a new supplier unexpectedly. We generally assemble our systems and parts based on our internal forecasts and the availability of raw materials, assemblies, components and finished goods that are supplied to us by third parties, which are subject to various lead times. If certain suppliers were to decide to discontinue production of an assembly, component or raw material that we use, the unanticipated change in the availability of supplies, or unanticipated supply limitations, could cause delays in, or loss of, sales, increased production or related costs and consequently reduced margins, and damage to our reputation. If we were unable to find a suitable supplier for a particular component, material or compound, we could be required to modify our existing products or the end-parts that we offer to accommodate substitute components, material or compounds.

Discontinuation of operations at our manufacturing sites could prevent us from timely filling customer orders and could lead to unforeseen costs for us.

We plan to assemble and test the systems that we sell, and produce consumables for our systems, at single facilities in various locations that are specifically dedicated to separate categories of systems and consumables. Because of our reliance on all of these production facilities, a disruption at any of those facilities could materially damage our ability to supply 3D printers, other systems or consumable materials to the marketplace in a timely manner. Depending on the cause of the disruption, we could also incur significant costs to remedy the disruption and resume product shipments. Such disruptions may be caused by, among other factors, earthquakes, fire, flood and other natural disasters. Accordingly, any such disruption could result in a material adverse effect on our revenue, results of operations and earnings, and could also potentially damage our reputation.

Our planned international operations will expose us to additional market and operational risks, and failure to manage these risks may adversely affect our business and operating results.

We expect to derive a substantial percentage of our sales from international markets. Accordingly, we will face significant operational risks from doing business internationally, including:

Our failure to manage the market and operational risks associated with our international operations effectively could limit the future growth of our business and adversely affect our operating results.

Significant disruptions of our information technology systems or breaches of our data security could adversely affect our business.

A significant invasion, interruption, destruction or breakdown of our information technology systems and/or infrastructure by persons with authorized or unauthorized access could negatively impact our business and operations. We could also experience business interruption, information theft and/or reputational damage from cyber-attacks, which may compromise our systems and lead to data leakage either internally or at our third party providers. Our systems have been, and are expected to continue to be, the target of malware and other cyber-attacks. Although we have invested in measures to reduce these risks, we cannot assure you that these measures will be successful in preventing compromise and/or disruption of our information technology systems and related data.

Under applicable employment laws, we may not be able to enforce covenants not to compete and therefore may be unable to prevent our competitors from benefiting from the expertise of some of our former employees.

We generally enter into non-competition agreements with our employees. These agreements prohibit our employees from competing directly with us or working for our competitors or clients for a limited period after they cease working for us. We may be unable to enforce these agreements under the laws of the jurisdictions in which our employees work and it may be difficult for us to restrict our competitors from benefiting from the expertise that our former employees or consultants developed while working for us. For example, Israeli courts have required employers seeking to enforce non-compete undertakings of a former employee to demonstrate that the competitive activities of the former employee will harm one of a limited number of material interests of the employer that have been recognized by the courts, such as the secrecy of a company’s confidential commercial information or the protection of its intellectual property. If we cannot demonstrate that such interests will be harmed, we may be unable to prevent our competitors from benefiting from the expertise of our former employees or consultants and our ability to remain competitive may be diminished.

We are subject to environmental laws due to the import and export of our products, which could subject us to compliance costs and/or potential liability in the event of non-compliance.

The export of our products internationally from our production facilities subjects us to environmental laws and regulations concerning the import and export of chemicals and hazardous substances such as the U.S. Toxic Substances Control Act, or TSCA, and the Registration, Evaluation, Authorization and Restriction of Chemical Substances, or REACH. These laws and regulations require the testing and registration of some chemicals that we ship along with, or that form a part of, our systems and other products. If we fail to comply with these or similar laws and regulations, we may be required to make significant expenditures to reformulate the chemicals that we use in our products and materials or incur costs to register such chemicals to gain and/or regain compliance. Additionally, we could be subject to significant fines or other civil and criminal penalties should we not achieve such compliance.

Risks Related to Our Intellectual Property

If we are unable to obtain and maintain effective patent rights for our products, we may not be able to compete effectively in our markets. If we are unable to protect the confidentiality of our trade secrets or know-how, such proprietary information may be used by others to compete against us.

Historically, we have relied on trade secret protection and confidentiality agreements to protect the intellectual property related to our technologies and products. Since October 2014, we have also sought patent protection for certain of our products. Our success depends in large part on our ability to obtain and maintain patent and other intellectual property protection in the United States and in other countries with respect to our proprietary technology and new products.

We have sought to protect our proprietary position by filing patent applications in the United States and in other countries, with respect to our novel technologies and products, which are important to our business. Patent prosecution is expensive and time consuming, and we may not be able to file and prosecute all necessary or desirable patent applications at a reasonable cost or in a timely manner. It is also possible that we will fail to identify patentable aspects of our research and development output before it is too late to obtain patent protection.

We have a limited portfolio of six provisional and two non-provisional patent applications with the U.S. Patent and Trademark Office, or the USPTO, and for one of which, we have a received a notice of allowance. We cannot offer any assurances about which, if any, patent applications will issue, the breadth of any such patent or whether any issued patents will be found invalid and unenforceable or will be threatened by third parties. Any successful opposition to these patents or any other patents owned by or licensed to us after patent issuance could deprive us of rights necessary for the successful commercialization of any new products that we may develop.

We have three patents and their continuations and foreign counterparts licensed exclusively from the Hebrew University covering some of our underlying core technology. To the extent the licensed patents are found to be invalid or unenforceable, we may be limited in our ability to compete and market our products. The terms of our license with Hebrew University leave full control of any and all enforcement of the licensed patents with Hebrew University. If Hebrew University elects to not enforce any or all of the licensed patents it could significantly undercut the value of any of our products, which would materially adversely affect our future revenue, financial condition and results of operations. Moreover, fluctuating currency rates may create inconsistencies in the royalty payments we have under the license.

Further, there is no assurance that all potentially relevant prior art relating to our patent applications has been found, which can invalidate a patent or prevent a patent from issuing from a pending patent application. Even if patents do successfully issue, and even if such patents cover our products, third parties may challenge their validity, enforceability, or scope, which may result in such patents being narrowed, found unenforceable or invalidated. Furthermore, even if they are unchallenged, our patent applications and any future patents may not adequately protect our intellectual property, provide exclusivity for our new products, or prevent others from designing around our claims. Any of these outcomes could impair our ability to prevent competition from third parties, which may have an adverse impact on our business.

If we cannot obtain and maintain effective patent rights for our products, we may not be able to compete effectively, and our business and results of operations would be harmed.

If we are unable to maintain effective proprietary rights for our products, we may not be able to compete effectively in our markets.

In addition to the protection afforded by any patents currently owned and that may be granted, historically, we have relied on trade secret protection and confidentiality agreements to protect proprietary know-how that is not patentable or that we elect not to patent, processes that are not easily known, knowable or easily ascertainable, and for which patent infringement is difficult to monitor and enforce and any other elements of our product candidate discovery and development processes that involve proprietary know-how, information or technology that is not covered by patents. However, trade secrets can be difficult to protect. We seek to protect our proprietary technology and processes, in part, by entering into confidentiality agreements with our employees, consultants, scientific advisors, and contractors. We also seek to preserve the integrity and confidentiality of our data, trade secrets and intellectual property by maintaining physical security of our premises and physical and electronic security of our information technology systems. Agreements or security measures may be breached, and we may not have adequate remedies for any breach. In addition, our trade secrets and intellectual property may otherwise become known or be independently discovered by competitors.

We cannot provide any assurances that our trade secrets and other confidential proprietary information will not be disclosed in violation of our confidentiality agreements or that competitors will not otherwise gain access to our trade secrets or independently develop substantially equivalent information and techniques. Also, misappropriation or unauthorized and unavoidable disclosure of our trade secrets and intellectual property could impair our competitive position and may have a material adverse effect on our business. Additionally, if the steps taken to maintain our trade secrets and intellectual property are deemed inadequate, we may have insufficient recourse against third parties for misappropriating any trade secret.

Intellectual property rights of third parties could adversely affect our ability to commercialize our products, and we might be required to litigate or obtain licenses from third parties in order to develop or market our product candidates. Such litigation or licenses could be costly or not available on commercially reasonable terms.

It is inherently difficult to conclusively assess our freedom to operate without infringing on third party rights. Our competitive position may be adversely affected if existing patents or patents resulting from patent applications issued to third parties or other third party intellectual property rights are held to cover our products or elements thereof, or our manufacturing or uses relevant to our development plans. In such cases, we may not be in a position to develop or commercialize products or our product candidates unless we successfully pursue litigation to nullify or invalidate the third party intellectual property right concerned, or enter into a license agreement with the intellectual property right holder, if available on commercially reasonable terms. There may also be pending patent applications that if they result in issued patents, could be alleged to be infringed by our new products. If such an infringement claim should be brought and be successful, we may be required to pay substantial damages, be forced to abandon our new products or seek a license from any patent holders. No assurances can be given that a license will be available on commercially reasonable terms, if at all.

It is also possible that we have failed to identify relevant third party patents or applications. For example, U.S. patent applications filed before November 29, 2000 and certain U.S. patent applications filed after that date that will not be filed outside the United States remain confidential until patents issue. Patent applications in the United States and elsewhere are published approximately 18 months after the earliest filing for which priority is claimed, with such earliest filing date being commonly referred to as the priority date. Therefore, patent applications covering our new products or platform technology could have been filed by others without our knowledge. Additionally, pending patent applications which have been published can, subject to certain limitations, be later amended in a manner that could cover our platform technologies, our new products or the use of our new products. Third party intellectual property right holders may also actively bring infringement claims against us. We cannot guarantee that we will be able to successfully settle or otherwise resolve such infringement claims. If we are unable to successfully settle future claims on terms acceptable to us, we may be required to engage in or continue costly, unpredictable and time-consuming litigation and may be prevented from or experience substantial delays in pursuing the development of and/or marketing our new products. If we fail in any such dispute, in addition to being forced to pay damages, we may be temporarily or permanently prohibited from commercializing our new products that are held to be infringing. We might, if possible, also be forced to redesign our new products so that we no longer infringe the third party intellectual property rights. Any of these events, even if we were ultimately to prevail, could require us to divert substantial financial and management resources that we would otherwise be able to devote to our business.

Third-party claims of intellectual property infringement may prevent or delay our development and commercialization efforts.

Our commercial success depends in part on our avoiding infringement of the patents and proprietary rights of third parties. Numerous U.S. and foreign issued patents and pending patent applications, which are owned by third parties, exist in the fields in which we are developing new products. As our industries expand and more patents are issued, the risk increases that our products may be subject to claims of infringement of the patent rights of third parties.

Third parties may assert that we are employing their proprietary technology without authorization. There may be third-party patents or patent applications with claims to materials, designs or methods of manufacture related to the use or manufacture of our products. There may be currently pending patent applications that may later result in issued patents that our products may infringe. In addition, third parties may obtain patents in the future and claim that use of our technologies infringes upon these patents.

If any third-party patents were held by a court of competent jurisdiction to cover aspects of our formulations, processes for designs, or methods of use, the holders of any such patents may be able to block our ability to develop and commercialize the applicable product candidate unless we obtain a license or until such patent expires or is finally determined to be invalid or unenforceable. In either case, such a license may not be available on commercially reasonable terms or at all.

Parties making claims against us may obtain injunctive or other equitable relief, which could effectively block our ability to further develop and commercialize one or more of our products. Defense of these claims, regardless of their merit, would involve substantial litigation expense and would be a substantial diversion of employee resources from our business. In the event of a successful claim of infringement against us, we may have to pay substantial damages, including treble damages and attorneys’ fees for willful infringement, pay royalties, redesign our infringing products or obtain one or more licenses from third parties, which may be impossible or require substantial time and monetary expenditure.

Patent policy and rule changes could increase the uncertainties and costs surrounding the prosecution of our patent applications and the enforcement or defense of any issued patents.

Changes in either the patent laws or interpretation of the patent laws in the United States and other countries may diminish the value of any patents that may issue from our patent applications, or narrow the scope of our patent protection. The laws of foreign countries may not protect our rights to the same extent as the laws of the United States. Publications of discoveries in the scientific literature often lag behind the actual discoveries, and patent applications in the United States and other jurisdictions are typically not published until 18 months after filing, or in some cases not at all. We therefore cannot be certain that we were the first to file the invention claimed in our owned and licensed patent or pending applications, or that we or our licensor were the first to file for patent protection of such inventions. Assuming all other requirements for patentability are met, in the United States prior to March 15, 2013, the first to make the claimed invention without undue delay in filing, is entitled to the patent, while outside the United States, the first to file a patent application is entitled to the patent. After March 15, 2013, under the Leahy-Smith America Invents Act, or the Leahy-Smith Act, enacted on September 16, 2011, the United States has moved to a first to file system. The Leahy-Smith Act also includes a number of significant changes that affect the way patent applications will be prosecuted and may also affect patent litigation. In general, the Leahy-Smith Act and its implementation could increase the uncertainties and costs surrounding the prosecution of our patent applications and the enforcement or defense of any issued patents, all of which could have a material adverse effect on our business and financial condition.

We may be involved in lawsuits to protect or enforce our intellectual property, which could be expensive, time consuming, and unsuccessful.

Competitors may infringe our intellectual property. If we were to initiate legal proceedings against a third party to enforce a patent covering one of our new products, the defendant could counterclaim that the patent covering our product candidate is invalid and/or unenforceable. In patent litigation in the United States, defendant counterclaims alleging invalidity and/or unenforceability are commonplace. Grounds for a validity challenge could be an alleged failure to meet any of several statutory requirements, including lack of novelty, obviousness, or non-enablement. Grounds for an unenforceability assertion could be an allegation that someone connected with prosecution of the patent withheld relevant information from the USPTO, or made a misleading statement, during prosecution. Under the Leahy-Smith Act, the validity of U.S. patents may also be challenged in post-grant proceedings before the USPTO. The outcome following legal assertions of invalidity and unenforceability is unpredictable.

Derivation proceedings initiated by third parties or brought by us may be necessary to determine the priority of inventions and/or their scope with respect to our patent or patent applications or those of our licensors. An unfavorable outcome could require us to cease using the related technology or to attempt to license rights to it from the prevailing party. Our business could be harmed if the prevailing party does not offer us a license on commercially reasonable terms. Our defense of litigation or interference proceedings may fail and, even if successful, may result in substantial costs and distract our management and other employees. In addition, the uncertainties associated with litigation could have a material adverse effect on our ability to raise the funds necessary to continue our clinical trials, continue our research programs, license necessary technology from third parties, or enter into development partnerships that would help us bring our new products to market.

Furthermore, because of the substantial amount of discovery required in connection with intellectual property litigation, there is a risk that some of our confidential information could be compromised by disclosure during this type of litigation. There could also be public announcements of the results of hearings, motions, or other interim proceedings or developments. If securities analysts or investors perceive these results to be negative, it could have a material adverse effect on the price of our Ordinary Shares.

We have been subject, and may in the future be subject to further claims that our employees, consultants, or independent contractors have wrongfully or unavoidably used or disclosed confidential information of third parties or that our employees have wrongfully used or disclosed alleged trade secrets of their former employers.

On March 19, 2015, XJet Ltd., or XJet, filed a lawsuit in the District Court in Tel Aviv-Jaffa, against us, our officers, directors, shareholders several employees and our subsidiary company. XJet has alleged that one or more of our officers and/or employees previously employed by XJet stole trade secrets and proprietary technology relating to inkjet printing and 3D printing. XJet is seeking NIS 20 million in damages and an injunction on the use of such trade secrets and proprietary technology.

In addition, we employ individuals who were previously employed at our competitors or potential competitors. We try to ensure that our employees, consultants, and independent contractors do not use the proprietary information or know-how of others in their work for us, but we may nevertheless be subject to claims that we or our employees, consultants, or independent contractors have inadvertently or otherwise used or disclosed intellectual property, including trade secrets or other proprietary information, of any of our employees’ former employers or other third parties. Litigation may result and be necessary to defend against these claims. If we fail in defending any such claims, in addition to paying monetary damages, we may lose valuable intellectual property rights or personnel, which could adversely impact our business. Even if we are successful in defending against such claims, litigation could result in substantial costs and be a distraction to management and other employees.

We may be subject to claims challenging the inventorship of our intellectual property.

We may be subject to claims that former employees, collaborators or other third parties have an interest in, or right to compensation, with respect to our current patent and patent applications, future patents or other intellectual property as an inventor or co-inventor. For example, we may have inventorship disputes arise from conflicting obligations of consultants or others who are involved in developing our products. Litigation may be necessary to defend against these and other claims challenging inventorship or claiming the right to compensation. If we fail in defending any such claims, in addition to paying monetary damages, we may lose valuable intellectual property rights, such as exclusive ownership of, or right to use, valuable intellectual property. Such an outcome could have a material adverse effect on our business. Even if we are successful in defending against such claims, litigation could result in substantial costs and be a distraction to management and other employees.

We may not be able to protect our intellectual property rights throughout the world.

Filing, prosecuting, and defending patents on products, as well as monitoring their infringement in all countries throughout the world would be prohibitively expensive, and our intellectual property rights in some countries can be less extensive than those in the United States. In addition, the laws of some foreign countries do not protect intellectual property rights to the same extent as federal and state laws in the United States.

Competitors may use our technologies in jurisdictions where we have not obtained patent protection to develop their own products and may also export otherwise infringing products to territories where we have patent protection, but enforcement is not as strong as that in the United States. These products may compete with our products. Future patents or other intellectual property rights may not be effective or sufficient to prevent them from competing.

Many companies have encountered significant problems in protecting and defending intellectual property rights in foreign jurisdictions. The legal systems of certain countries, particularly certain developing countries, do not favor the enforcement of patents, trade secrets, and other intellectual property protection, which could make it difficult for us to stop the marketing of competing products in violation of our proprietary rights generally. Proceedings to enforce our patent rights in foreign jurisdictions, whether or not successful, could result in substantial costs and divert our efforts and attention from other aspects of our business, could put our future patents at risk of being invalidated or interpreted narrowly and our patent applications at risk of not issuing and could provoke third parties to assert claims against us. We may not prevail in any lawsuits that we initiate and the damages or other remedies awarded, if any, may not be commercially meaningful. Accordingly, our efforts to monitor and enforce our intellectual property rights around the world may be inadequate to obtain a significant commercial advantage from the intellectual property that we develop or license.

Risks Related to the Ownership of Our ADSs or Ordinary Shares

Sales of a substantial number of our ADSs or Ordinary Shares or ADSs in the public market by our existing shareholders could cause our share price to fall.

Sales of a substantial number of our ADSs or Ordinary Shares in the public market, or the perception that these sales might occur, could depress the market price of our ADSs or Ordinary Shares and could impair our ability to raise capital through the sale of additional equity securities. We are unable to predict the effect that sales may have on the prevailing market price of our ADSs or Ordinary Shares.

Our principal shareholders, officers and directors currently own over 48% of our outstanding Ordinary Shares. They will therefore be able to exert significant control over matters submitted to our shareholders for approval.

As of September 30, 2015, our principal shareholders, officers and directors beneficially own approximately 48% of our ADSs or Ordinary Shares. This significant concentration of share ownership may adversely affect the trading price for our Ordinary Shares because investors often perceive disadvantages in owning shares in companies with controlling shareholders. As a result, these shareholders, if they acted together, could significantly influence or even unilaterally approve matters requiring approval by our shareholders, including the election of directors and the approval of mergers or other business combination transactions. The interests of these shareholders may not always coincide with our interests or the interests of other shareholders.

The JOBS Act will allow us to postpone the date by which we must comply with some of the laws and regulations intended to protect investors and to reduce the amount of information we provide in our reports filed with the SEC, which could undermine investor confidence in our company and adversely affect the market price of our ADSs or Ordinary Shares.

For so long as we remain an “emerging growth company” as defined in the Jumpstart Our Business Startups Act of 2012, or the JOBS Act, we intend to take advantage of certain exemptions from various requirements that are applicable to public companies that are not “emerging growth companies” including:

We intend to take advantage of these exemptions until we are no longer an “emerging growth company.” We will remain an emerging growth company until the earlier of (1) the last day of the fiscal year (a) following the fifth anniversary of the date of our first sale of common equity securities pursuant to an effective registration statement under the Securities Act, (b) in which we have total annual gross revenue of at least $1.0 billion, or (c) in which we are deemed to be a large accelerated filer, which means the market value of our Ordinary Shares that is held by non-affiliates exceeds $700 million as of the prior June 30, and (2) the date on which we have issued more than $1.0 billion in non-convertible debt during the prior three-year period.

We cannot predict if investors will find our ADSs or Ordinary Shares less attractive because we may rely on these exemptions. If some investors find our ADSs or Ordinary Shares less attractive as a result, there may be a less active trading market for our ADSs or Ordinary Shares, and our market prices may be more volatile and may decline.

As a “foreign private issuer” we are permitted, and intend, to follow certain home country corporate governance practices instead of otherwise applicable SEC and NASDAQ requirements, which may result in less protection than is accorded to investors under rules applicable to domestic U.S. issuers.

Our status as a foreign private issuer also exempts us from compliance with certain SEC laws and regulations and certain regulations of the NASDAQ Stock Market, including the proxy rules, the short-swing profits recapture rules, and certain governance requirements such as independent director oversight of the nomination of directors and executive compensation. In addition, we will not be required under the Exchange Act of 1934, as amended, or the Exchange Act, to file current reports and financial statements with the SEC as frequently or as promptly as U.S. domestic companies whose securities are registered under the Exchange Act and we will generally be exempt from filing quarterly reports with the SEC. Also, although a recent amendment to the Israeli Companies Law, or the Companies Law, will require us to disclose the annual compensation of our five most highly compensated senior officers on an individual basis (rather than on an aggregate basis, as was permitted under the Companies Law for Israeli public companies listed overseas, such as in the United States, prior to such amendment), this disclosure will not be as extensive as that required of a U.S. domestic issuer. For example, it currently appears as if the disclosure required under Israeli law would be limited to compensation paid in the immediately preceding year without any requirement to disclose option exercises and vested stock options, pension benefits or potential payments upon termination or a change of control. Furthermore, as a foreign private issuer, we are also not subject to the requirements of Regulation FD (Fair Disclosure) promulgated under the Exchange Act.

These exemptions and leniencies will reduce the frequency and scope of information and protections to which you are entitled as an investor.

We may be a “passive foreign investment company”, or PFIC, for U.S. federal income tax purposes in the current taxable year or may become one in any subsequent taxable year. There generally would be negative tax consequences for U.S. taxpayers that are holders of our ADSs or Ordinary Shares if we are or were to become a PFIC.

Based on the projected composition of our income and valuation of our assets, we do not expect to be a PFIC for our current taxable year, and we do not expect to become a PFIC in the future, although there can be no assurance in this regard. The determination of whether we are a PFIC is made on an annual basis and will depend on the composition of our income and assets from time to time. We will be treated as a PFIC for U.S. federal income tax purposes in any taxable year in which either (1) at least 75% of our gross income is “passive income” or (2) on average at least 50% of our assets by value produce passive income or are held for the production of passive income. Passive income for this purpose generally includes, among other things, certain dividends, interest, royalties, rents and gains from commodities and securities transactions and from the sale or exchange of property that gives rise to passive income. Passive income also includes amounts derived by reason of the temporary investment of funds, including those raised in a public offering. In determining whether a non-U.S. corporation is a PFIC, a proportionate share of the income and assets of each corporation in which it owns, directly or indirectly, at least a 25% interest (by value) is taken into account. The tests for determining PFIC status are applied annually, and it is difficult to make accurate projections of future income and assets which are relevant to this determination. In addition, our PFIC status may depend in part on the market value of our ADSs or Ordinary Shares. Accordingly, there can be no assurance that we currently are not or will not become a PFIC in the future. If we are a PFIC in any taxable year during which a U.S. taxpayer holds our ADSs or Ordinary Shares, such U.S. taxpayer would be subject to certain adverse U.S. federal income tax rules. In particular, if the U.S. taxpayer did not make an election to treat us as a “qualified electing fund,” or QEF, or make a “mark-to-market” election, then “excess distributions” to the U.S. taxpayer, and any gain realized on the sale or other disposition of our ADSs or Ordinary Shares by the U.S. taxpayer: (1) would be allocated ratably over the U.S. taxpayer’s holding period for the ADSs or Ordinary Shares; (2) the amount allocated to the current taxable year and any period prior to the first day of the first taxable year in which we were a PFIC would be taxed as ordinary income; and (3) the amount allocated to each of the other taxable years would be subject to tax at the highest rate of tax in effect for the applicable class of taxpayer for that year, and an interest charge for the deemed deferral benefit would be imposed with respect to the resulting tax attributable to each such other taxable year. In addition, if the U.S. Internal Revenue Service, or the IRS, determines that we are a PFIC for a year with respect to which we have determined that we were not a PFIC, it may be too late for a U.S. taxpayer to make a timely QEF or mark-to-market election. U.S. taxpayers that have held our ADSs or Ordinary Shares during a period when we were a PFIC will be subject to the foregoing rules, even if we cease to be a PFIC in subsequent years, subject to exceptions for U.S. taxpayer who made a timely QEF or mark-to-market election. A U.S. taxpayer can make a QEF election by completing the relevant portions of and filing IRS Form 8621 in accordance with the instructions thereto. We do not intend to notify U.S. taxpayers that hold our ADSs or Ordinary Shares if we believe we will be treated as a PFIC for any taxable year in order to enable U.S. taxpayers to consider whether to make a QEF election. In addition, we do not intend to furnish such U.S. taxpayers annually with information needed in order to complete IRS Form 8621 and to make and maintain a valid QEF election for any year in which we or any of our subsidiaries are a PFIC. U.S. taxpayers that hold our ADSs or Ordinary Shares are strongly urged to consult their tax advisors about the PFIC rules, including tax return filing requirements and the eligibility, manner, and consequences to them of making a QEF or mark-to-market election with respect to our ADSs or Ordinary Shares in the event that we are a PFIC. See “Taxation — U.S. Federal Income Tax Considerations — Passive Foreign Investment Companies” for additional information.

We may be subject to securities litigation, which is expensive and could divert management attention.

In the past, companies that have experienced volatility in the market price of their stock have been subject to securities class action litigation. We may be the target of this type of litigation in the future. Litigation of this type could result in substantial costs and diversion of management’s attention and resources, which could seriously hurt our business. Any adverse determination in litigation could also subject us to significant liabilities.

If securities or industry analysts do not publish or cease publishing research or reports about us, our business or our market, or if they adversely change their recommendations or publish negative reports regarding our business or our shares, our share price and trading volume could decline .

The trading market for our ADSs or Ordinary Shares will be influenced by the research and reports that industry or securities analysts may publish about us, our business, our market or our competitors. We do not have any control over these analysts and we cannot provide any assurance that analysts will cover us or provide favorable coverage. If any of the analysts who may cover us adversely change their recommendation regarding our shares, or provide more favorable relative recommendations about our competitors, our share price would likely decline. If any analyst who may cover us were to cease coverage of our company or fail to regularly publish reports on us, we could lose visibility in the financial markets, which in turn could cause our share price or trading volume to decline.

Risks Related to Israeli Law and Our Operations in Israel

Our operations are subject to currency and interest rate fluctuations.

We incur expenses in U.S. dollars and NIS, but our financial statements are denominated in NIS. As a result, we are affected by foreign currency exchange fluctuations through both translation risk and transaction risk. As a result, we are exposed to the risk that the NIS may appreciate relative to the dollar, or, if the NIS instead devalues relative to the dollar, that the inflation rate in Israel may exceed such rate of devaluation of the NIS, or that the timing of such devaluation may lag behind inflation in Israel. In any such event, the dollar cost of our operations in Israel would increase and our dollar-denominated results of operations would be adversely affected.

Provisions of Israeli law and our amended and restated articles of association may delay, prevent or otherwise impede a merger with, or an acquisition of, our company, which could prevent a change of control, even when the terms of such a transaction are favorable to us and our shareholders.

Israeli corporate law regulates mergers, requires tender offers for acquisitions of shares above specified thresholds, requires special approvals for transactions involving directors, officers or significant shareholders and regulates other matters that may be relevant to such types of transactions. For example, a merger may not be consummated unless at least 50 days have passed from the date on which a merger proposal is filed by each merging company with the Israel Registrar of Companies and at least 30 days have passed from the date on which the shareholders of both merging companies have approved the merger. In addition, a majority of each class of securities of the target company must approve a merger. Moreover, a tender offer for all of a company’s issued and outstanding shares can only be completed if the acquirer receives positive responses from the holders of at least 95% of the issued share capital. Completion of the tender offer also requires approval of a majority of the offerees that do not have a personal interest in the tender offer, unless, following consummation of the tender offer, the acquirer would hold at least 98% of the company’s outstanding shares. Furthermore, the shareholders, including those who indicated their acceptance of the tender offer, may, at any time within six months following the completion of the tender offer, claim that the consideration for the acquisition of the shares does not reflect their fair market value, and petition an Israeli court to alter the consideration for the acquisition accordingly, unless the acquirer stipulated in its tender offer that a shareholder that accepts the offer may not seek such appraisal rights, and the acquirer or the company published all required information with respect to the tender offer prior to the tender offer’s response date.

Israeli tax considerations also may make potential transactions unappealing to us or to our shareholders whose country of residence does not have a tax treaty with Israel exempting such shareholders from Israeli tax. See “Taxation — Israeli Tax Considerations” for additional information.

Our amended and restated articles of association also contain provisions that could delay or prevent changes in control or changes in our management without the consent of our board of directors. These provisions include the following:

It may be difficult to enforce a judgment of a United States court against us and our officers and directors and the Israeli experts named in this prospectus in Israel or the United States, to assert United States securities laws claims in Israel or to serve process on our officers and directors and these experts.

We were incorporated in Israel. All of our executive officers and directors reside outside of the United States, and all of our assets and most of the assets of these persons are located outside of the United States. Therefore, a judgment obtained against us, or any of these persons, including a judgment based on the civil liability provisions of the U.S. federal securities laws, may not be collectible in the United States and may not necessarily be enforced by an Israeli court. It also may be difficult to affect service of process on these persons in the United States or to assert U.S. securities law claims in original actions instituted in Israel. Additionally, it may be difficult for an investor, or any other person or entity, to initiate an action with respect to United States securities laws in Israel. Israeli courts may refuse to hear a claim based on an alleged violation of United States securities laws reasoning that Israel is not the most appropriate forum in which to bring such a claim. In addition, even if an Israeli court agrees to hear a claim, it may determine that Israeli law and not United States law is applicable to the claim. If United States law is found to be applicable, the content of applicable United States law must be proven as a fact by expert witnesses, which can be a time consuming and costly process. Certain matters of procedure will also be governed by Israeli law. There is little binding case law in Israel that addresses the matters described above. As a result of the difficulty associated with enforcing a judgment against us in Israel, you may not be able to collect any damages awarded by either a United States or foreign court. See “Enforceability of Civil Liabilities” for additional information on your ability to enforce a civil claim against us and our executive officers or directors named in this prospectus.

Our headquarters and other significant operations are located in Israel, and, therefore, our results may be adversely affected by political, economic and military instability in Israel.

Our executive offices are located in Israel. In addition, all of our officers and directors are residents of Israel. Accordingly, political, economic and military conditions in Israel may directly affect our business. Since the establishment of the State of Israel in 1948, a number of armed conflicts have taken place between Israel and its neighboring countries. Any hostilities involving Israel or the interruption or curtailment of trade between Israel and its trading partners could adversely affect our operations and results of operations. During the summer of 2006, Israel was engaged in an armed conflict with Hezbollah, a Lebanese Islamist Shiite militia group and political party, and since March 2011, there has been a civil war in Syria, Israel’s neighboring country to the north. Occasionally, violence from Syria has spilled over into Israel, and Israel has responded militarily several times since the onset of the civil war. During November 2012 and July 2014, Israel was engaged in an armed conflict with a militia group and political party which controls the Gaza Strip. These conflicts involved missile strikes against civilian targets in various parts of Israel, including areas in which our employees and some of our consultants are located, and negatively affected business conditions in Israel. Any potential future conflict could also include such missile strikes against other parts of Israel, including our offices and facilities. Any armed conflicts, terrorist activities or political instability in the region could adversely affect business conditions, could harm our results of operations and could make it more difficult for us to raise capital. Parties with whom we do business may sometimes decline to travel to Israel during periods of heightened unrest or tension, forcing us to make alternative arrangements when necessary in order to meet our business partners face to face. In addition, the political and security situation in Israel may result in parties with whom we have agreements involving performance in Israel claiming that they are not obligated to perform their commitments under those agreements pursuant to force majeure provisions in such agreements.

Our commercial insurance does not cover losses that may occur as a result of an event associated with the security situation in the Middle East. Although the Israeli government has in the past covered the reinstatement value of certain damages that were caused by terrorist attacks or acts of war, we cannot assure you that this government coverage will be maintained or, if maintained, will be sufficient to compensate us fully for damages incurred. Any losses or damages incurred by us could have a material adverse effect on our business. Any armed conflicts or political instability in the region would likely negatively affect business conditions generally and could harm our results of operations.

Further, in the past, the State of Israel and Israeli companies have been subjected to economic boycotts. Several countries still restrict business with the State of Israel and with Israeli companies. These restrictive laws and policies may have an adverse impact on our operating results, financial conditions or the expansion of our business.

Your rights and responsibilities as a shareholder will be governed by Israeli law, which differs in some material respects from the rights and responsibilities of shareholders of U.S. companies.

The rights and responsibilities of the holders of our ADSs or Ordinary Shares are governed by our amended and restated articles of association and by Israeli law. These rights and responsibilities differ in some material respects from the rights and responsibilities of shareholders in typical U.S.-based corporations. In particular, a shareholder of an Israeli company has certain duties to act in good faith and fairness toward the company and other shareholders and to refrain from abusing its power in the company. See “Duties of Shareholders” for additional information. There is limited case law available to assist us in understanding the nature of this duty or the implications of these provisions. These provisions may be interpreted to impose additional obligations on holders of our ADSs or Ordinary Shares that are not typically imposed on shareholders of U.S. corporations.

We received Israeli government grants for certain of our research and development activities. The terms of those grants may require us to pay royalties and to satisfy specified conditions in order to manufacture products and transfer technologies outside of Israel. We may be required to pay penalties in addition to repayment of the grants.

Our research and development efforts have been financed in part through royalty-bearing grants in an aggregate amount of approximately $355,000 that we received from Israel's Office of the Chief Scientist of the Ministry of Economy, or the OCS, as of September 30, 2015. With respect to the royalty-bearing grants we are committed to pay royalties at a rate of 3% to 5% on sales proceeds from our products that were developed under OCS programs up to the total amount of grants received, linked to the U.S. dollar and bearing interest at an annual rate of LIBOR applicable to U.S. dollar deposits. Regardless of any royalty payment, we are further required to comply with the requirements of the Israeli Encouragement of Industrial Research and Development Law, 5744-1984, as amended, and related regulations, or the Research Law, with respect to those past grants. When a company develops know-how, technology or products using OCS grants, the terms of these grants and the Research Law restrict the transfer of such know-how, and the transfer of manufacturing or manufacturing rights of such products, technologies or know-how outside of Israel, without the prior approval of the OCS. Therefore, the discretionary approval of an OCS committee would be required for any transfer to third parties inside or outside of Israel of know-how or manufacturing or manufacturing rights related to those aspects of such technologies. We may not receive those approvals. Furthermore, the OCS may impose certain conditions on any arrangement under which it permits us to transfer technology or development out of Israel.

The transfer of OCS-supported technology or know-how outside of Israel may involve the payment of significant amounts, depending upon the value of the transferred technology or know-how, our research and development expenses, the amount of OCS support, the time of completion of the OCS-supported research project and other factors. These restrictions and requirements for payment may impair our ability to sell or otherwise transfer our technology assets outside of Israel or to outsource or transfer development or manufacturing activities with respect to any product or technology outside of Israel. Furthermore, the consideration available to our shareholders in a transaction involving the transfer outside of Israel of technology or know-how developed with OCS funding (such as a merger or similar transaction) may be reduced by any amounts that we are required to pay to the OCS.

Our operations may be disrupted as a result of the obligation of management or key personnel to perform military service.

Our employees and consultants in Israel, including members of our senior management, may be obligated to perform one month, and in some cases longer periods, of military reserve duty until they reach the age of 40 (or older, for citizens who hold certain positions in the Israeli armed forces reserves) and, in the event of a military conflict, may be called to active duty. In response to increases in terrorist activity, there have been periods of significant call-ups of military reservists. It is possible that there will be similar large-scale military reserve duty call-ups in the future. Our operations could be disrupted by the absence of a significant number of our officers, directors, employees and consultants. Such disruption could materially adversely affect our business and operations.