As filed with the Securities and Exchange Commission on March 15, 2018

 

 

 

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, DC 20549

 

FORM 20-F

 

ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

 

For the fiscal year ended December 31, 2017

 

Commission File No.:  001-37600

 

NANO DIMENSION LTD.

(Exact name of registrant as specified in its charter)

 

Translation of registrant’s name into English: Not applicable

 

State of Israel  

2 Ilan Ramon

Ness Ziona

7403635 Israel

(Jurisdiction of incorporation or organization)   (Address of principal executive offices)

 

Amit Dror

Chief Executive Officer

+972-073-7509142

amit@nano-di.com

2 Ilan Ramon

Ness Ziona

7403635 Israel

(Name, Telephone, E-mail and/or Facsimile number and Address of Company Contact Person)

 

Securities registered or to be registered pursuant to Section 12(b) of the Act:

 

Title of each class:

American Depository Shares each representing 5

Ordinary Shares, par value NIS 0.10 per share(1)

Ordinary Shares, par value NIS 0.10 per share(2)

 

Name of each exchange on which registered or to be registered:

Nasdaq Capital Market

 

(1) Evidenced by American Depositary Receipts.
   
(2) Not for trading, but only in connection with the listing of the American Depositary Shares.

 

Securities registered or to be registered pursuant to Section 12(g) of the Act: None

 

Securities for which there is a reporting obligation pursuant to Section 15(d) of the Act: None

 

Indicate the number of outstanding shares of each of the issuer’s classes of capital or common stock as of the close of the period covered by the annual report.

 

62,511,208 Ordinary Shares, par value NIS 0.10 per share, as of December 31, 2017.

 

 

 

 

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.

 

Yes ☐                   No ☒

 

If this report is an annual or transition report, indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or 15(d) of the Exchange Act of 1934.

 

Yes ☐                   No ☒

 

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Exchange Act during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.

 

Yes ☒                   No ☐

 

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate website, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T during the preceding 12 months.

 

Yes ☒                   No ☐

 

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or an emerging growth company. See definition of “large accelerated filer, “accelerated filer,” and emerging growth company” in Rule 12b-2 of the Exchange Act.

 

Large accelerated filer Accelerated filer Non-accelerated filer
    Emerging growth company ☒

 

If an emerging growth company that prepares its financial statements in accordance with U.S. GAAP, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards † provided pursuant to Section 13(a) of the Exchange Act. ☐

 

†The term “new or revised financial accounting standard” refers to any update issued by the Financial Accounting Standards Board to its Accounting Standards Codification after April 5, 2012. 

 

Indicate by check mark which basis of accounting the registrant has used to prepare the financial statements included in this filing.

 

U.S. GAAP ☐

 

International Financial Reporting Standards as issued by the International Accounting Standards Board  ☒

 

Other ☐

 

If “Other” has been checked in response to the previous question, indicate by check mark which financial statement item the registrant has elected to follow.

 

☐ Item 17                 ☐ Item 18

 

If this is an annual report, indicate by check mark whether the registrant is a shell company.

 

Yes ☐                   No ☒

 

 

 

 

 

 

TABLE OF CONTENTS

 

    Page
INTRODUCTION 1
CAUTIONARY NOTE REGARDING FORWARD-LOOKING STATEMENTS 1
     
PART I
     
ITEM 1. IDENTITY OF DIRECTORS, SENIOR MANAGEMENT AND ADVISERS. 3
ITEM 2. OFFER STATISTICS AND EXPECTED TIMETABLE. 3
ITEM 3. KEY INFORMATION. 3
A. Selected Financial Data. 3
B. Capitalization and Indebtedness. 5
C. Reasons for the Offer and Use of Proceeds. 5
D. Risk Factors. 5
ITEM 4. INFORMATION ON THE COMPANY. 23
A. History and Development of the Company. 23
B. Business Overview. 24
C. Organizational Structure. 34
D. Property, Plants and Equipment. 34
ITEM 4A. UNRESOLVED STAFF COMMENTS. 35
ITEM 5. OPERATING AND FINANCIAL REVIEW AND PROSPECTS. 35
A. Operating Results. 35
B. Liquidity and Capital Resources. 40
E. Off-Balance Sheet Arrangements. 43
F. Tabular Disclosure of Contractual Obligations. 43
ITEM 6. DIRECTORS, SENIOR MANAGEMENT AND EMPLOYEES. 44
A. Directors and Senior Management. 44
B. Compensation. 47
C. Board Practices. 48
D. Employees. 58
E. Share Ownership. 58
ITEM 7. MAJOR SHAREHOLDERS AND RELATED PARTY TRANSACTIONS. 60
A. Major Shareholders. 60
B. Related Party Transactions. 61
C. Interests of Experts and Counsel. 63
ITEM 8. FINANCIAL INFORMATION. 63
A. Consolidated Statements and Other Financial Information. 63
B. Significant Changes. 64

 

 

 

 

ITEM 9. THE OFFER AND LISTING. 64
A. Offer and Listing Details. 64
B. Plan of Distribution. 65
C. Markets. 65
D. Selling Shareholders. 65
E. Dilution. 65
F. Expenses of the Issue. 65
ITEM 10. ADDITIONAL INFORMATION. 66
A. Share Capital. 66
B. Articles of Association. 66
C. Material Contracts. 69
D. Exchange Controls. 69
E. Taxation. 70
F. Dividends and Paying Agents. 78
G. Statement by Experts. 78
H. Documents on Display. 78
I. Subsidiary Information. 79
ITEM 11. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK. 79
ITEM 12. DESCRIPTION OF SECURITIES OTHER THAN EQUITY SECURITIES. 80
A. Debt Securities. 80
B. Warrants and rights. 80
C. Other Securities. 80
D. American Depositary Shares. 80
     
PART II
 
ITEM 13. DEFAULTS, DIVIDEND ARREARAGES AND DELINQUENCIES. 81
ITEM 14. MATERIAL MODIFICATIONS TO THE RIGHTS OF SECURITY HOLDERS AND USE OF PROCEEDS. 81
ITEM 15. CONTROLS AND PROCEDURES. 81
ITEM 16A. AUDIT COMMITTEE FINANCIAL EXPERT. 82
ITEM 16B. CODE OF ETHICS. 82
ITEM 16C. PRINCIPAL ACCOUNTANT FEES AND SERVICES. 82
ITEM 16D. EXEMPTIONS FROM THE LISTING STANDARDS FOR AUDIT COMMITTEES. 83
ITEM 16E. PURCHASES OF EQUITY SECURITIES BY THE ISSUER AND AFFILIATED PURCHASERS. 83
ITEM 16F. CHANGE IN REGISTRANT’S CERTIFYING ACCOUNTANT. 83
ITEM 16G. CORPORATE GOVERNANCE. 83
ITEM 16H. MINE SAFETY DISCLOSURE. 85
     
PART III
 
ITEM 17. FINANCIAL STATEMENTS. 86
ITEM 18. FINANCIAL STATEMENTS. 86
ITEM 19. EXHIBITS. 86
SIGNATURES 87

 

 

 

 

 

INTRODUCTION

 

We are an additive manufacturing company that is disrupting, reshaping, and defining the future of how electronics are made. With our unique three-dimensional (3D) printing technologies, we are targeting the growing demand for electronic devices that require increasingly sophisticated features and rely on printed circuit boards (PCBs). Demand for circuitry, including sensors, antennas and PCBs - which are the heart of every electronic device - covers a diverse range of industries, including consumer electronics, medical devices, defense, aerospace, automotive, internet of things (IoT) and telecom. These sectors can all benefit greatly from our 3D printed electronics solutions for rapid prototyping and short-run manufacturing.

 

We are developing, manufacturing and selling 3D printers and ink materials and products based on nano-technology. Our Dragonfly 2020 Pro 3D printer uses our proprietary ink and integrated software to quickly create sensors, antennas and PCB prototypes. Our 3D printer builds objects by depositing multiple layers of “ink” material, one on top of another. We enhance the ability of electrical engineers, designers and manufacturers to conceptualize, test and develop encapsulated sensors, 3D antennas and PCBs in a shortened development cycle bypassing common prototyping bottlenecks.

 

We were incorporated under the laws of the State of Israel in December 1960. .Our Ordinary Shares, or Ordinary Shares, are listed on the Tel Aviv Stock Exchange, or TASE, under the symbol “NNDM.” On March 7, 2016, our American Depositary Shares, or ADSs, each representing five of our Ordinary Shares, commenced trading on the Nasdaq Capital Market under the symbol “NNDM.”

 

Unless otherwise indicated, all references to the “Company,” “we,” “our” and “Nano Dimension” refer to Nano Dimension Ltd. and its subsidiaries, Nano Dimension Technologies Ltd., or Nano Technologies, an Israeli corporation, and Nano Dimension USA Inc., or Nano USA, a Delaware corporation.

 

References to “U.S. dollars” and “$” are to currency of the United States of America, and references to “NIS” are to New Israeli Shekels. References to “Ordinary Shares” are to our Ordinary Shares, par value of NIS 0.1 per share. We report financial information under International Financial Reporting Standards, or IFRS, as issued by the International Accounting Standards Board, or IASB, and none of the financial statements were prepared in accordance with generally accepted accounting principles in the United States. Unless otherwise indicated, U.S. dollar convenience translations of NIS amounts presented in this annual report on Form 20-F for the year ended on December 31, 2017 are translated using the rate of NIS 3.467 to $1.00, the exchange rate reported by the Bank of Israel on December 31, 2017, U.S. dollar convenience translations of NIS amounts presented in this annual report on Form 20-F for the year ended on December 31, 2016 are translated using the rate of NIS 3.845 to $1.00, the exchange rate reported by the Bank of Israel on December 31, 2016, and U.S. dollar convenience translations of NIS amounts presented in this annual report on Form 20-F for the year ended on December 31, 2015 are translated using the rate of NIS 3.902 to $1.00, the exchange rate reported by the Bank of Israel on December 31, 2015.

 

CAUTIONARY NOTE REGARDING FORWARD-LOOKING STATEMENTS

 

Certain information included or incorporated by reference in this annual report on Form 20-F may be deemed to be “forward-looking statements” within the meaning of the Private Securities Litigation Reform Act of 1995 and other securities laws. Forward-looking statements are often characterized by the use of forward-looking terminology such as “may,” “will,” “expect,” “anticipate,” “estimate,” “continue,” “believe,” “should,” “intend,” “project” or other similar words, but are not the only way these statements are identified.

 

These forward-looking statements may include, but are not limited to, statements relating to our objectives, plans and strategies, statements that contain projections of results of operations or of financial condition, expected capital needs and expenses, statements relating to the research, development, completion and use of our products, and all statements (other than statements of historical facts) that address activities, events or developments that we intend, expect, project, believe or anticipate will or may occur in the future.

 

  1  

 

 

Forward-looking statements are not guarantees of future performance and are subject to risks and uncertainties. We have based these forward-looking statements on assumptions and assessments made by our management in light of their experience and their perception of historical trends, current conditions, expected future developments and other factors they believe to be appropriate.

 

Important factors that could cause actual results, developments and business decisions to differ materially from those anticipated in these forward-looking statements include, among other things:

 

  the overall global economic environment;
     
  the impact of competition and new technologies;
     
  general market, political and economic conditions in the countries in which we operate;
     
  projected capital expenditures and liquidity;
     
  changes in our strategy;
     
  litigation; and
     
  those factors referred to in “Item 3. Key Information – D. Risk Factors,” “Item 4. Information on the Company,” and “Item 5. Operating and Financial Review and Prospects”, as well as in this annual report on Form 20-F generally.

 

Readers are urged to carefully review and consider the various disclosures made throughout this annual report on Form 20-F which are designed to advise interested parties of the risks and factors that may affect our business, financial condition, results of operations and prospects.

 

You should not put undue reliance on any forward-looking statements. Any forward-looking statements in this annual report on Form 20-F are made as of the date hereof, and we undertake no obligation to publicly update or revise any forward-looking statements, whether as a result of new information, future events or otherwise, except as required by law.

 

In addition, the section of this annual report on Form 20-F entitled “Item 4. Information on the Company” contains information obtained from independent industry sources and other sources that we have not independently verified.

 

  2  

 

 

PART I

 

ITEM 1. IDENTITY OF DIRECTORS, SENIOR MANAGEMENT AND ADVISERS

 

Not applicable.

 

ITEM 2. OFFER STATISTICS AND EXPECTED TIMETABLE

 

Not applicable.

 

ITEM 3. KEY INFORMATION

 

A. Selected Financial Data

 

The selected consolidated financial data for the fiscal years set forth in the table below have been derived from our consolidated financial statements and notes thereto. We derived the selected data under the captions “Consolidated Statement of Profit or Loss and Other Comprehensive Income Data” for the years ended December 31, 2017, 2016 and 2015, and “Consolidated Statement of Financial Position Data” as of December 31, 2017 and 2016 from the audited consolidated financial statements included elsewhere in this Annual Report. We derived the selected data under the captions “Consolidated Statement of Profit or Loss and Other Comprehensive Income Data” for the years ended December 31, 2014 and 2013 and “Consolidated Statement of Financial Position Data” as of December 31, 2015, 2014 and 2013 from audited financial statements that are not included in this Annual Report on Form 20-F. The selected financial data should be read in conjunction with our consolidated financial statements, and are qualified entirely by reference to such consolidated financial statements. Other financial and operating data contains unaudited information that is not derived from our financial statements. The information presented below under the caption "Other financial and operating data" contains unaudited information which is not derived from our financial statements.

 

(in thousands except per share data)   Year Ended December 31,     Year Ended
December 31,
 
    2013     2014     2015     2016     2017     2017  
    NIS     U.S. dollars -Convenience
Translation
 
Consolidated Statements of Profit or Loss and Other Comprehensive Income Data:                                    
Revenues     -       -       -       175       2,984       861  
Cost of revenues     -       -       -       72       1,471       424  
Cost of revenues- amortization of intangible     -       -       -       668       2,676       772  
Gross loss     -       -       -       565       1,163       335  
Research and development expenses, net     806       3,339       11,089 *     15,525 *     38,947       11,233  
General and administrative expenses     94 *     1,364 *     9,371 *     14,660 *     12,101       3,491  
Sales and marketing expenses                     1,916 *     3,864 *     7,859       2,267  
Operating loss     900       4,703       22,376       34,614       60,070       17,326  
Listing expenses     -       9,358       -       -       -       -  
Finance expenses (income), net     34       117       (1,384 )     (144 )     2,935       847 )
Total Comprehensive loss     934       14,178       20,992       34,470       63,005       18,173  
                                                 
Basic and diluted loss per Ordinary Share     0.25       1.11       0.78       0.85       1.11       0.32  
Weighted average of number of Ordinary Shares used in the calculation of the basic and diluted loss per Ordinary Share     3,684       12,754       26,819       40,760       56,540          

 

* Reclassified - In the fourth quarter of 2017, we decided to present our sales and marketing expenses separate from other operating expenses. Thus, for comparison we have reclassified the expenses in the previous years.

 

  3  

 

 

(in thousands except per share data)   As of December 31,     As of
December 31,
 
    2013     2014     2015     2016     2017     2017  
    NIS     U.S. dollars - Convenience
Translation
 
Consolidated Statement of Financial Position Data:                                    
Cash     5       806       33,811       47,599       21,159       6,103  
Total assets     51       2,420       51,538       85,459       74,524       21,496  
Total non-current liabilities     -       370       993       3,675       3,931       1,135  
Accumulated loss     964       15,142       36,134       70,604       133,609       38,537  
Total equity (deficit)     (188 )     663       47,004       74,218       62,982       18,166  
Number of shares outstanding     6,018,503       19,070,931       34,321,056       50,142,804       62,511,208          

 

Other financial and operating data:

 

(in thousands)   Year Ended December 31,  
    2017     2017  
    NIS     U.S. dollars - Convenience Translation  
EBITDA     (55,352 )     (15,965 )
Adjusted EBITDA     (49,036 )     (14,144 )

 

EBITDA is a non-IFRS measure and is defined as earnings before financial expense (income), income tax, depreciation and amortization, disposal of property plant and equipment, and other income (expenses), net. We believe that EBITDA, as described above, should be considered in evaluating the company’s operations. EBITDA facilitates operating performance comparisons from period to period and company to company by backing out potential differences caused by variations in capital structures (affecting financial expenses (income), net), and the age and depreciation charges and amortization of fixed and intangible assets, respectively (affecting relative depreciation and amortization expense, respectively) and EBITDA is useful to an investor in evaluating our operating performance because they are widely used by investors, securities analysts and other interested parties to measure a company’s operating performance without regard to one-time costs associated with non-recurring events and without regard to non-cash items.

 

Adjusted EBITDA is a non-IFRS measure and is defined as earnings before financial expense (income), income tax, depreciation and amortization, disposal of property plant and equipment, other income (expenses), net and share based payments. We believe that Adjusted EBITDA, as described above, should be considered in evaluating the company’s operations. Adjusted EBITDA facilitates operating performance comparisons from period to period and company to company by backing out potential differences caused by variations in capital structures (affecting financial expenses (income), net), and the age and depreciation charges and amortization of fixed and intangible assets, respectively (affecting relative depreciation and amortization expense, respectively) and Adjusted EBITDA is useful to an investor in evaluating our operating performance because they are widely used by investors, securities analysts and other interested parties to measure a company’s operating performance without regard to one-time costs associated with non-recurring events and without regard to non-cash items, such as expenses related to share based payments.

 

The following is a reconciliation of net loss to EBITDA and adjusted EBITDA:

 

(in thousands)   Year Ended December 31,  
    2017     2017  
    NIS     U.S. dollars - Convenience Translation  
Net loss     (63,005 )     (18,173 )
Financing expense, net     2,935       847  
Depreciation, amortization and disposal of property plant and equipment     4,718       1,361  
EBITDA     (55,352 )     (15,965 )
Share based payments     6,316       1,821  
Adjusted EBITDA     (49,036 )     (14,144 )

 

  4  

 

 

EXCHANGE RATE INFORMATION

 

The following table sets forth information regarding the exchange rates of U.S. dollars per NIS for the periods indicated. Average rates are calculated by using the daily representative rates as reported by the Bank of Israel on the last day of each month during the periods presented.

 

    NIS per U.S. dollars  
Year Ended December 31,   High     Low     Average     Period End  
2017     3.860       3.467       3.600       3.467  
2016     3.983       3.746       3.840       3.845  
2015     4.053       3.761       3.884       3.902  
2014     3.994       3.402       3.577       3.889  
2013     3.791       3.471       3.609       3.471  

 

The following table sets forth the high and low daily representative rates for the NIS as reported by the Bank of Israel for each of the prior six months.

 

    NIS per U.S. dollars  
Month   High     Low     Average     Period End  
February 2018     3.535       3.427       3.494       3.485  
January 2018     3.460       3.388       3.423       3.405  
December 2017     3.550       3.467       3.503       3.467  
November 2017     3.544       3.499       3.517       3.499  
October 2017     3.542       3.491       3.512       3.521  
September 2017     3.584       3.504       3.537       3.529  

 

B. Capitalization and Indebtedness

 

Not applicable.

 

C. Reasons for the Offer and Use of Proceeds

 

Not applicable.

 

D. Risk Factors

 

You should carefully consider the risks described below, together with all of the other information in this annual report on Form 20-F. The risks described below are not the only risks facing us. Additional risks and uncertainties not currently known to us or that we currently deem to be immaterial may also materially and adversely affect our business operations. If any of these risks actually occurs, our business and financial condition could suffer and the price of our ADSs could decline.

  

Risks Related to Our Financial Condition and Capital Requirements

 

We are a development-stage company and have a limited operating history on which to assess the prospects for our business, have incurred significant losses since the date of inception of Nano Dimension Technologies Ltd., and anticipate that we will continue to incur significant losses until we are able to successfully commercialize our products.

 

  5  

 

 

From March 7, 2014, until August 25, 2014, we were a “shell corporation” and did not have any business activity, excluding administrative management. On August 25, 2014, we closed a merger transaction, or the Merger, with Nano Dimension Technologies Ltd., or the Subsidiary, whereby we acquired 100% of the share capital of the Subsidiary. Since the date of the Merger, we have been operating as a development-stage company and have a limited operating history on which to assess the prospects for our business, have incurred significant losses, and anticipate that we will continue to incur significant losses for the foreseeable future.

 

Since the date of inception of the Subsidiary, and as of December 31, 2017, we have incurred net losses of approximately NIS 134 million (approximately $39 million).

 

Since the date of the Merger, we have devoted substantially all of our financial resources to develop our products. To date, we have generated insignificant revenues from the sale and lease of our products. Since the Merger, we have financed our operations primarily through the issuance of equity securities. The amount of our future net losses and our ability to finance our operations will depend, in part, on completing the development of our products, the rate of our future expenditures, our ability to generate significant revenues from the sales of our products and our ability to obtain funding through the issuance of our securities, strategic collaborations or grants. We expect to continue to incur significant losses until we are able to generate significant revenues from the sales of our products. We anticipate that our expenses will increase substantially if and as we:

 

  continue the development of our products;

 

  establish a sales, marketing, and distribution infrastructure to successfully commercialize our products;

 

  seek to identify, assess, acquire, license, and/or develop other products and subsequent generations of our current products;

 

  seek to maintain, protect, and expand our intellectual property portfolio;

 

  seek to attract and retain skilled personnel; and

 

  create additional infrastructure to support our operations as a public company and our product development and planned future commercialization efforts.

 

We have generated insignificant revenues from the sale of our current products and may never be profitable.

 

We have only recently begun commercializing our products and have generated insignificant revenues since the date of the Merger. Our ability to generate significant revenues and achieve profitability depends on our ability to successfully complete the development of, and to commercialize, our products. Our ability to generate future revenue from product sales depends heavily on our success in many areas, including but not limited to:

 

  completing development of our products;

 

  establishing and maintaining supply and manufacturing relationships with third parties that can provide adequate (in amount and quality) products to support market demand for our products;

 

  launching and commercializing products, either directly or with a collaborator or distributor;

 

  addressing any competing technological and market developments;

 

  identifying, assessing, acquiring and/or developing new products;

 

  negotiating favorable terms in any collaboration, licensing or other arrangements into which we may enter;

 

  maintaining, protecting and expanding our portfolio of intellectual property rights, including patents, trade secrets and know-how; and

 

  attracting, hiring and retaining qualified personnel.

 

  6  

 

 

We expect that we will need to raise substantial additional funding before we can expect to become profitable from sales of our products. This additional financing may not be available on acceptable terms, or at all. Failure to obtain this necessary capital when needed may force us to delay, limit or terminate our product development efforts or other operations.

 

We expect that we will require additional capital to successfully commercialize our products. In addition, our operating plans may change as a result of many factors that may currently be unknown to us, and we may need to seek additional funds sooner than planned. Our future funding requirements will depend on many factors, including but not limited to:

 

  the scope, rate of progress, results and cost of product development, and other related activities;

 

  the cost of manufacturing  and establishing commercial supplies, of our products;

 

  the cost and timing of establishing sales, marketing, and distribution capabilities; and

 

  the terms and timing of any collaborative, licensing, and other arrangements that we may establish.

 

Any additional fundraising efforts may divert our management from their day-to-day activities, which may adversely affect our ability to develop and successfully commercialize our products. In addition, we cannot guarantee that future financing will be available in sufficient amounts or on terms acceptable to us, if at all. Moreover, the terms of any financing may adversely affect the holdings or the rights of our stockholders and the issuance of additional securities, whether equity or debt, by us, or the possibility of such issuance, may cause the market price of our Ordinary Shares or ADSs to decline. The incurrence of indebtedness could result in increased fixed payment obligations, and we may be required to agree to certain restrictive covenants, such as limitations on our ability to incur additional debt, limitations on our ability to acquire, sell or license intellectual property rights and other operating restrictions that could adversely impact our ability to conduct our business. We could also be required to seek funds through arrangements with collaborative partners or otherwise at an earlier stage than otherwise would be desirable, and we may be required to relinquish rights to some of our technologies or products or otherwise agree to terms unfavorable to us, any of which may have a material adverse effect on our business, operating results and prospects. Even if we believe that we have sufficient funds for our current or future operating plans, we may seek additional capital if market conditions are favorable or if we have specific strategic considerations.

 

If we are unable to obtain funding on a timely basis, we may be required to significantly curtail, delay or discontinue one or more of our research or development programs or the commercialization of any products or be unable to expand our operations or otherwise capitalize on our business opportunities, as desired, which could materially affect our business, financial condition and results of operations.

 

Raising additional capital would cause dilution to our existing shareholders, and may affect the rights of existing shareholders.

 

We may seek additional capital through a combination of private and public equity offerings, debt financings and collaborations and strategic and licensing arrangements. To the extent that we raise additional capital through the issuance of equity or convertible debt securities, your ownership interest will be diluted, and the terms may include liquidation or other preferences that adversely affect your rights as a holder of our ADSs.

 

  7  

 

 

Risks Related to Our Business and Industry

 

Our future success depends in part on our ability to retain our executive officers and to attract, retain and motivate other qualified personnel.

 

We are highly dependent on Amit Dror, our Chief Executive Officer, and Simon Anthony-Fried, President of our wholly-owned subsidiary, Nano Dimension USA. The loss of their services without a proper replacement may adversely impact the achievement of our objectives. Messrs. Dror and Fried may leave our employment at any time subject to contractual notice periods, as applicable. Recruiting and retaining other qualified employees, consultants, and advisors for our business, including scientific and technical personnel, will also be critical to our success. There is currently a shortage of skilled personnel in our industry, which is likely to continue. As a result, competition for skilled personnel is intense and the turnover rate can be high. We may not be able to attract and retain personnel on acceptable terms given the competition in the industry in which we operate. The inability to recruit and retain qualified personnel, or the loss of the services of our executive officers, without proper replacement, may impede the progress of our development and commercialization objectives.

 

We depend entirely on the commercial success of our 3D printer and ink products, and we may not be able to successfully introduce these products and commercialize them.

 

We have invested almost all of our efforts and financial resources in the research and development of our products. As a result, our business is entirely dependent on our ability to successfully commercialize our Dragonfly 2020 Pro 3D printer and ink products. We only recently initiated commercial sales of our 3D printer. We cannot assure you that our commercialization efforts will lead to meaningful sales of our products.

 

We may not be able to introduce products acceptable to customers and we may not be able to improve the technology used in our current systems in response to changing technology and end-user needs.

 

The markets in which we operate are subject to rapid and substantial innovation and technological change, mainly driven by technological advances and end-user requirements and preferences, as well as the emergence of new standards and practices. Our ability to compete in the 3D printing and PCB markets will depend, in large part, on our future success in enhancing our existing products and developing new 3D printing systems that will address the increasingly sophisticated and varied needs of prospective end-users, and respond to technological advances and industry standards and practices on a cost-effective and timely basis or otherwise gain market acceptance.

 

It is likely that new systems and technologies that we develop will eventually supplant our existing systems or that our competitors will create systems that will replace our systems. As a result, any of our products may be rendered obsolete or uneconomical by our or others’ technological advances.

 

We rely on highly-skilled technical personnel and if we are unable to attract, retain or motivate key personnel or hire qualified personnel, we may not be able to grow or our business may contract, which would have a material adverse effect on our results of operations and financial condition.

 

Our performance is largely dependent on the talents and efforts of highly-skilled individuals, particularly our printing-system engineers, nanotech chemists, electrical engineers, software engineers, mechanical engineers and computer professionals. Our future success depends on our continuing ability to identify, hire, develop, motivate and retain highly-skilled personnel and, if we are unable to hire and train a sufficient number of qualified employees for any reason, we may not be able to implement our current initiatives or grow, or our business may contract and we may lose market share. Moreover, certain of our competitors or other technology businesses may seek to hire our employees. There is no assurance that any equity or other incentives that we grant to our employees will be adequate to attract, retain and motivate employees in the future. If we do not succeed in attracting, retaining and motivating highly qualified personnel, our business will suffer. 

 

  8  

 

 

We may not be able to successfully manage our planned growth and expansion.

 

We expect to continue to make investments in our Dragonfly 2020 Pro 3D printer and our related ink products. We expect that our annual operating expenses will continue to increase as we invest in sales and marketing, research and development, manufacturing and production infrastructure, and develop customer service and support resources for future customers. Our failure to expand operational and financial systems timely or efficiently could result in operating inefficiencies, which could increase our costs and expenses more than we had planned and prevent us from successfully executing our business plan. We may not be able to offset the costs of operation expansion by leveraging the economies of scale from our growth in negotiations with our suppliers and contract manufacturers. Additionally, if we increase our operating expenses in anticipation of the growth of our business and this growth does not meet our expectations, our financial results will be negatively impacted.

 

If our business grows, we will have to manage additional product design projects, materials procurement processes, and sales efforts and marketing for an increasing number of products, as well as expand the number and scope of our relationships with suppliers, distributors and end customers. If we fail to manage these additional responsibilities and relationships successfully, we may incur significant costs, which may negatively impact our operating results. Additionally, in our efforts to be first to market with new products with innovative functionality and features, we may devote significant research and development resources to products and product features for which a market does not develop quickly, or at all. If we are not able to predict market trends accurately, we may not benefit from such research and development activities, and our results of operations may suffer.

 

As our future development and commercialization plans and strategies develop, we expect to need additional managerial, operational, sales, marketing, financial and legal personnel. Our management may need to divert a disproportionate amount of its attention away from our day-to-day activities and devote a substantial amount of time to managing these growth activities. We may not be able to effectively manage the expansion of our operations, which may result in weaknesses in our infrastructure, operational mistakes, loss of business opportunities, failure to deliver and timely deliver our products to customers, loss of employees and reduced productivity among remaining employees. Our expected growth could require significant capital expenditures and may divert financial resources from other projects, such as the development of additional new products. If our management is unable to effectively manage our growth, our expenses may increase more than expected, our ability to generate and/or grow revenue could be reduced, and we may not be able to implement our business strategy. 

 

Our operating results and financial condition may fluctuate.

 

Even if we are successful in introducing our products to the market, the operating results and financial condition of our company may fluctuate from quarter to quarter and year to year and are likely to continue to vary due to a number of factors, many of which will not be within our control. If our operating results do not meet the guidance that we provide to the market place or the expectations of securities analysts or investors, the market price of our Ordinary Shares will likely decline. Fluctuations in our operating results and financial condition may be due to a number of factors, including those listed below and those identified throughout this “Risk Factors” section:

 

  the degree of market acceptance of our products and services;

 

  the mix of products and services that we sell during any period;

 

  long sales cycles;

 

  changes in the amount that that we spend to develop, acquire or license new products, consumables, technologies or businesses;

 

  changes in the amounts that we spend to promote our products and services;

 

  9  

 

 

  changes in the cost of satisfying our warranty obligations and servicing our installed base of systems;

 

  delays between our expenditures to develop and market new or enhanced systems and consumables and the generation of sales from those products;

 

  development of new competitive products and services by others;

 

  difficulty in predicting sales patterns and reorder rates that may result from a multi-tier distribution strategy associated with new product categories;

 

  litigation or threats of litigation, including intellectual property claims by third parties;

 

  changes in accounting rules and tax laws;

 

  the geographic distribution of our sales;

 

  our responses to price competition;

 

  general economic and industry conditions that affect end-user demand and end-user levels of product design and manufacturing;

 

  changes in interest rates that affect returns on our cash balances and short-term investments;

 

  changes in dollar-shekel exchange rates that affect the value of our net assets, future revenues and expenditures from and/or relating to our activities carried out in those currencies; and

 

  the level of research and development activities by our company.

 

Due to all of the foregoing factors, and the other risks discussed in this annual report on Form 20-F, you should not rely on quarter-to-quarter comparisons of our operating results as an indicator of our future performance.

  

The markets in which we participate are competitive. Our failure to compete successfully could cause any future revenues and the demand for our products not to materialize or to decline over time.

 

We aim to compete for customers with a wide variety of manufacturers that create PCBs. Our principal current competition consists of companies that produce prototype PCBs by traditional reductive manufacturing means, which include etching, pressing and drilling. Many of these companies have extensive track records and relationships within the electronics industry. While we are not aware of any other company that currently offers an in-house 3D printer that is capable of printing multilayer PCBs, there are a large number of companies engaged in additive manufacturing and 3D printing solutions.

 

Many of our current and potential competitors have longer operating histories and more extensive name recognition than we have and may also have greater financial, marketing, manufacturing, distribution and other resources than we have. Current and future competitors may be able to respond more quickly to new or emerging technologies and changes in end-user demands and to devote greater resources to the development, promotion and sale of their products than we can. Our current and potential competitors may develop and market new technologies that render our existing or future products obsolete, unmarketable or less competitive (whether from a price perspective or otherwise). We cannot assure you that we will be able to maintain a competitive position or to compete successfully against current and future sources of competition.

 

  10  

 

 

Defects in products could give rise to product returns or product liability, warranty or other claims that could result in material expenses, diversion of management time and attention, and damage to our reputation.

 

Even if we are successful in introducing our products to the market, our products may contain undetected defects or errors that, despite testing, are not discovered until after a product has been used. This could result in delayed market acceptance of those products, claims from distributors, end-users or others, increased end-user service and support costs and warranty claims, damage to our reputation and business, or significant costs to correct the defect or error. We may from time to time become subject to warranty or product liability claims that could lead to significant expenses as we need to compensate affected end-users for costs incurred related to product quality issues.

 

This risk of product liability claims may also be greater due to the use of certain hazardous chemicals used in the manufacture of certain of our products. In addition, we may be subject to claims that our 3D printers have been, or may be, used to create parts that are not in compliance with legal requirements.

 

Any claim brought against us, regardless of its merit, could result in material expense, diversion of management time and attention, and damage to our reputation, and could cause us to fail to retain or attract customers. Currently, we maintain minimal product liability insurance. Our product liability insurance is subject to significant deductibles and there is no guarantee that such insurance will be available or adequate to protect against all such claims. Costs or payments made in connection with warranty and product liability claims and product recalls or other claims could materially affect our financial condition and results of operations.

 

If our relationships with suppliers for our products and services, especially with single source suppliers of components of our products, were to terminate or our manufacturing arrangements were to be disrupted, our business could be interrupted.

 

We purchase component parts and raw materials that are used in our Dragonfly 2020 Pro 3D printer and ink products from third-party suppliers, some of whom may compete with us. While there are several potential suppliers of most of these component parts and raw materials that we use, we currently choose to use only one or a limited number of suppliers for several of these components and materials. Our reliance on a single or limited number of vendors involves a number of risks, including:

 

  potential shortages of some key components;

 

  product performance shortfalls, if traceable to particular product components, since the supplier of the faulty component cannot readily be replaced;

 

  discontinuation of a product on which we rely;

 

  potential insolvency of these vendors; and

 

  reduced control over delivery schedules, manufacturing capabilities, quality and costs.

 

In addition, we require any new supplier to become “qualified” pursuant to our internal procedures. The qualification process involves evaluations of varying durations, which may cause production delays if we were required to qualify a new supplier unexpectedly. We generally assemble our systems and parts based on our internal forecasts and the availability of raw materials, assemblies, components and finished goods that are supplied to us by third parties, which are subject to various lead times. If certain suppliers were to decide to discontinue production of an assembly, component or raw material that we use, the unanticipated change in the availability of supplies, or unanticipated supply limitations, could cause delays in, or loss of, sales, increased production or related costs and consequently reduced margins, and damage to our reputation. If we were unable to find a suitable supplier for a particular component, material or compound, we could be required to modify our existing products or the end-parts that we offer to accommodate substitute components, material or compounds.

 

  11  

 

 

Discontinuation of operations at our manufacturing sites could prevent us from timely filling customer orders and could lead to unforeseen costs for us.

 

We plan to assemble and test the systems that we sell, and produce consumables for our systems, at single facilities in various locations that are specifically dedicated to separate categories of systems and consumables. Because of our reliance on all of these production facilities, a disruption at any of those facilities could materially damage our ability to supply 3D printers, other systems or consumable materials to the marketplace in a timely manner. Depending on the cause of the disruption, we could also incur significant costs to remedy the disruption and resume product shipments. Such disruptions may be caused by, among other factors, earthquakes, fire, flood and other natural disasters. Accordingly, any such disruption could result in a material adverse effect on our revenue, results of operations and earnings, and could also potentially damage our reputation.

 

Our planned international operations will expose us to additional market and operational risks, and failure to manage these risks may adversely affect our business and operating results.

 

We expect to derive a substantial percentage of our sales from international markets. Accordingly, we will face significant operational risks from doing business internationally, including:

 

  fluctuations in foreign currency exchange rates;

 

  potentially longer sales and payment cycles;

 

  potentially greater difficulties in collecting accounts receivable;

 

  potentially adverse tax consequences;

 

  reduced protection of intellectual property rights in certain countries, particularly in Asia and South America;

 

  difficulties in staffing and managing foreign operations;

 

  laws and business practices favoring local competition;

 

  costs and difficulties of customizing products for foreign countries;

 

  compliance with a wide variety of complex foreign laws, treaties and regulations;

 

  tariffs, trade barriers and other regulatory or contractual limitations on our ability to sell or develop our products in certain foreign markets; and

 

  being subject to the laws, regulations and the court systems of many jurisdictions.

 

Our failure to manage the market and operational risks associated with our international operations effectively could limit the future growth of our business and adversely affect our operating results.

 

Significant disruptions of our information technology systems or breaches of our data security could adversely affect our business.

 

A significant invasion, interruption, destruction or breakdown of our information technology systems and/or infrastructure by persons with authorized or unauthorized access could negatively impact our business and operations. We could also experience business interruption, information theft and/or reputational damage from cyber-attacks, which may compromise our systems and lead to data leakage either internally or at our third party providers. Our systems have been, and are expected to continue to be, the target of malware and other cyber-attacks. Although we have invested in measures to reduce these risks, we cannot assure you that these measures will be successful in preventing compromise and/or disruption of our information technology systems and related data.

 

  12  

 

 

Under applicable employment laws, we may not be able to enforce covenants not to compete and therefore may be unable to prevent our competitors from benefiting from the expertise of some of our former employees.

 

We generally enter into non-competition agreements with our employees. These agreements prohibit our employees from competing directly with us or working for our competitors or clients for a limited period after they cease working for us. We may be unable to enforce these agreements under the laws of the jurisdictions in which our employees work and it may be difficult for us to restrict our competitors from benefiting from the expertise that our former employees or consultants developed while working for us. For example, Israeli courts have required employers seeking to enforce non-compete undertakings of a former employee to demonstrate that the competitive activities of the former employee will harm one of a limited number of material interests of the employer that have been recognized by the courts, such as the secrecy of a company’s confidential commercial information or the protection of its intellectual property. If we cannot demonstrate that such interests will be harmed, we may be unable to prevent our competitors from benefiting from the expertise of our former employees or consultants and our ability to remain competitive may be diminished.

 

We are subject to environmental laws due to the import and export of our products, which could subject us to compliance costs and/or potential liability in the event of non-compliance.

 

The export of our products internationally from our production facilities subjects us to environmental laws and regulations concerning the import and export of chemicals and hazardous substances such as the U.S. Toxic Substances Control Act, or TSCA, and the Registration, Evaluation, Authorization and Restriction of Chemical Substances, or REACH. These laws and regulations require the testing and registration of some chemicals that we ship along with, or that form a part of, our systems and other products. If we fail to comply with these or similar laws and regulations, we may be required to make significant expenditures to reformulate the chemicals that we use in our products and materials or incur costs to register such chemicals to gain and/or regain compliance. Additionally, we could be subject to significant fines or other civil and criminal penalties should we not achieve such compliance.

 

Risks Related to Our Intellectual Property

 

If we are unable to obtain and maintain effective patent rights for our products, we may not be able to compete effectively in our markets. If we are unable to protect the confidentiality of our trade secrets or know-how, such proprietary information may be used by others to compete against us.

 

Since October 2014, we have sought patent protection for certain of our products, systems, designs and methods. Our success depends in large part on our ability to obtain, maintain, monitor and enforce patent and other intellectual property protection in the United States and in other countries with respect to our proprietary technology and new products.

 

We have sought to protect our proprietary position by filing patent applications in the United States and in other countries, with respect to our novel technologies and products, which are important to our business. Patent prosecution is uncertain, expensive and time consuming, and we may not be able to file and prosecute all necessary or desirable patent applications at a reasonable cost or in a timely manner. It is also possible that we will fail to identify patentable aspects of our research and development output before it is too late to obtain patent protection.

 

We have a growing portfolio of eighteen provisional and non-provisional pending patent applications with the U.S. Patent and Trademark Office, or USPTO, the World Intellectual Property Organization, or WIPO, and various patent offices around the world, such as China, Japan, Europe, South Korea, filed through the Paris Convention Treaty, or PCT, and four for which we have issued U.S. patents. We cannot offer any assurances about which, if any, pending patent applications will issue, the breadth of any such patent or whether any issued patents will be found invalid and unenforceable or will be threatened by third parties. Any successful opposition to these patents or any other patents owned by or licensed to us after patent issuance could deprive us of rights necessary for the successful commercialization of any new products that we may develop.

 

  13  

 

 

We have three patents and their continuations and foreign counterparts licensed exclusively from the Hebrew University covering some of our underlying core technology. To the extent the licensed patents are found to be invalid or unenforceable, we may be limited in our ability to compete and market our products. The terms of our license with Hebrew University leave full control of any and all enforcement of the licensed patents with Hebrew University. If Hebrew University elects to not enforce any or all of the licensed patents it could significantly undercut the value of any of our products, which would materially adversely affect our future revenue, financial condition and results of operations. Moreover, fluctuating currency rates may create inconsistencies in the royalty payments we have under the license.

 

Further, there is no assurance that all potentially relevant prior art relating to our patent applications has been found, which can invalidate a patent or prevent a patent from issuing from a pending patent application. Even if patents do successfully issue, and even if such patents cover our products, third parties may challenge their validity, enforceability, or scope, which may result in such patents being narrowed, found unenforceable or invalidated. Furthermore, even if they are unchallenged, our patent applications and any future patents may not adequately protect our intellectual property, provide exclusivity for our new products, or prevent others from designing around our claims. Any of these outcomes could impair our ability to prevent competition from third parties, which may have an adverse impact on our business.

 

If we cannot obtain and maintain effective patent rights for our products, we may not be able to compete effectively, and our business and results of operations would be harmed.

 

If we are unable to maintain effective proprietary rights for our products, we may not be able to compete effectively in our markets.

 

In addition to the protection afforded by any patents currently owned and that may be granted, historically, we have relied on trade secret protection and confidentiality agreements to protect proprietary know-how that is not patentable or that we elect not to patent, processes that are not easily known, knowable or easily ascertainable, and for which patent infringement is difficult to monitor and enforce and any other elements of our product candidate discovery and development processes that involve proprietary know-how, information or technology that is not covered by patents. However, trade secrets can be difficult to protect. We seek to protect our proprietary technology and processes, in part, by entering into confidentiality agreements with our employees, consultants, scientific advisors, and contractors. We also seek to preserve the integrity and confidentiality of our data, trade secrets and intellectual property by maintaining physical security of our premises and physical and electronic security of our information technology systems. Agreements or security measures may be breached, and we may not have adequate remedies for any breach. In addition, our trade secrets and intellectual property may otherwise become known or be independently discovered by competitors.

 

We cannot provide any assurances that our trade secrets and other confidential proprietary information will not be disclosed in violation of our confidentiality agreements or that competitors will not otherwise gain access to our trade secrets or independently develop substantially equivalent information and techniques. Also, misappropriation or unauthorized and unavoidable disclosure of our trade secrets and intellectual property could impair our competitive position and may have a material adverse effect on our business. Additionally, if the steps taken to maintain our trade secrets and intellectual property are deemed inadequate, we may have insufficient recourse against third parties for misappropriating any trade secret.

 

Intellectual property rights of third parties could adversely affect our ability to successfully commercialize our products, and we might be required to litigate or obtain licenses from third parties in order to develop or market our product candidates. Such litigation or licenses could be costly or not available on commercially reasonable terms.

 

It is inherently difficult to conclusively assess our freedom to operate without infringing on third party rights. Our competitive position may be adversely affected if existing patents or patents resulting from patent applications issued to third parties or other third party intellectual property rights are held to cover our products or elements thereof, or our manufacturing or uses relevant to our development plans. In such cases, we may not be in a position to develop or commercialize products or our product candidates unless we successfully pursue litigation to nullify or invalidate the third party intellectual property right concerned, or enter into a license agreement with the intellectual property right holder, if available on commercially reasonable terms. There may also be pending patent applications that if they result in issued patents, could be alleged to be infringed by our new products. If such an infringement claim should be brought and be successful, we may be required to pay substantial damages, be forced to abandon our new products or seek a license from any patent holders. No assurances can be given that a license will be available on commercially reasonable terms, if at all.

 

  14  

 

 

It is also possible that we have failed to identify relevant third party patents or applications. For example, U.S. patent applications filed before November 29, 2000 and certain U.S. patent applications filed after that date that will not be filed outside the United States remain confidential until patents issue. Patent applications in the United States and elsewhere are published approximately 18 months after the earliest filing for which priority is claimed, with such earliest filing date being commonly referred to as the priority date. Therefore, patent applications covering our new products or platform technology could have been filed by others without our knowledge. Additionally, pending patent applications which have been published can, subject to certain limitations, be later amended in a manner that could cover our platform technologies, our new products or the use of our new products. Third party intellectual property right holders may also actively bring infringement claims against us. We cannot guarantee that we will be able to successfully settle or otherwise resolve such infringement claims. If we are unable to successfully settle future claims on terms acceptable to us, we may be required to engage in or continue costly, unpredictable and time-consuming litigation and may be prevented from or experience substantial delays in pursuing the development of and/or marketing our new products. If we fail in any such dispute, in addition to being forced to pay damages, we may be temporarily or permanently prohibited from commercializing our new products that are held to be infringing. We might, if possible, also be forced to redesign our new products so that we no longer infringe the third party intellectual property rights. Any of these events, even if we were ultimately to prevail, could require us to divert substantial financial and management resources that we would otherwise be able to devote to our business.

 

Third-party claims of intellectual property infringement may prevent or delay our development and commercialization efforts.

 

Our commercial success depends in part on our avoiding infringement of the patents and proprietary rights of third parties. Numerous U.S. and foreign issued patents and pending patent applications, which are owned by third parties, exist in the fields in which we are developing new products. As our industries expand and more patents are issued, the risk increases that our products may be subject to claims of infringement of the patent rights of third parties.

 

Third parties may assert that we are employing their proprietary technology without authorization. There may be third-party patents or patent applications with claims to materials, designs or methods of manufacture related to the use or manufacture of our products. There may be currently pending patent applications that may later result in issued patents that our products may infringe. In addition, third parties may obtain patents in the future and claim that use of our technologies infringes upon these patents. 

 

If any third-party patents were held by a court of competent jurisdiction to cover aspects of our formulations, processes for designs, or methods of use, the holders of any such patents may be able to block our ability to develop and commercialize the applicable product candidate unless we obtain a license or until such patent expires or is finally determined to be invalid or unenforceable. In either case, such a license may not be available on commercially reasonable terms or at all.

 

Parties making claims against us may obtain injunctive or other equitable relief, which could effectively block our ability to further develop and commercialize one or more of our products. Defense of these claims, regardless of their merit, would involve substantial litigation expense and would be a substantial diversion of employee resources from our business. In the event of a successful claim of infringement against us, we may have to pay substantial damages, including treble damages and attorneys’ fees for willful infringement, pay royalties, redesign our infringing products or obtain one or more licenses from third parties, which may be impossible or require substantial time and monetary expenditure.

 

  15  

 

 

Patent policy and rule changes could increase the uncertainties and costs surrounding the prosecution of our patent applications and the enforcement or defense of any issued patents.

 

Changes in either the patent laws or interpretation of the patent laws in the United States and other countries may diminish the value of any patents that may issue from our patent applications, or narrow the scope of our patent protection. The laws of foreign countries may not protect our rights to the same extent as the laws of the United States. Publications of discoveries in the scientific literature often lag behind the actual discoveries, and patent applications in the United States and other jurisdictions are typically not published until 18 months after filing, or in some cases not at all. We therefore cannot be certain that we were the first to file the invention claimed in our owned and licensed patent or pending applications, or that we or our licensor were the first to file for patent protection of such inventions. Assuming all other requirements for patentability are met, in the United States prior to March 15, 2013, the first to make the claimed invention without undue delay in filing, is entitled to the patent, while outside the United States, the first to file a patent application is entitled to the patent. After March 15, 2013, under the Leahy-Smith America Invents Act, or the Leahy-Smith Act, enacted on September 16, 2011, the United States has moved to a first to file system. The Leahy-Smith Act also includes a number of significant changes that affect the way patent applications will be prosecuted and may also affect patent litigation. In general, the Leahy-Smith Act and its implementation could increase the uncertainties and costs surrounding the prosecution of our patent applications and the enforcement or defense of any issued patents, all of which could have a material adverse effect on our business and financial condition.

 

We may be involved in lawsuits to protect or enforce our intellectual property, which could be expensive, time consuming, and unsuccessful.

 

Competitors may infringe our intellectual property. If we were to initiate legal proceedings against a third party to enforce a patent covering one of our new products, the defendant could counterclaim that the patent covering our product candidate is invalid and/or unenforceable. In patent litigation in the United States, defendant counterclaims alleging invalidity and/or unenforceability are commonplace. Grounds for a validity challenge could be an alleged failure to meet any of several statutory requirements, including lack of novelty, obviousness, or non-enablement. Grounds for an unenforceability assertion could be an allegation that someone connected with prosecution of the patent withheld relevant information from the USPTO, or made a misleading statement, during prosecution. Under the Leahy-Smith Act, the validity of U.S. patents may also be challenged in post-grant proceedings before the USPTO. The outcome following legal assertions of invalidity and unenforceability is unpredictable.

 

Derivation proceedings initiated by third parties or brought by us may be necessary to determine the priority of inventions and/or their scope with respect to our patent or patent applications or those of our licensors. An unfavorable outcome could require us to cease using the related technology or to attempt to license rights to it from the prevailing party. Our business could be harmed if the prevailing party does not offer us a license on commercially reasonable terms. Our defense of litigation or interference proceedings may fail and, even if successful, may result in substantial costs and distract our management and other employees. In addition, the uncertainties associated with litigation could have a material adverse effect on our ability to raise the funds necessary to continue our clinical trials, continue our research programs, license necessary technology from third parties, or enter into development partnerships that would help us bring our new products to market. 

 

Furthermore, because of the substantial amount of discovery required in connection with intellectual property litigation, there is a risk that some of our confidential information could be compromised by disclosure during this type of litigation. There could also be public announcements of the results of hearings, motions, or other interim proceedings or developments. If securities analysts or investors perceive these results to be negative, it could have a material adverse effect on the price of our Ordinary Shares.

 

  16  

 

 

We have been subject, and may in the future be subject to further claims that our employees, consultants, or independent contractors have wrongfully or unavoidably used or disclosed confidential information of third parties or that our employees have wrongfully used or disclosed alleged trade secrets of their former employers.

 

In the past, we have been subject to litigation disputes involving the ownership of our intellectual property. In 2015 a claim was filed in the District Court in Tel-Aviv Jaffa alleging that certain of our officers and employees misappropriated commercial secrets and technology while employed at a previous employer. While this claim was settled without material effects to our business, we continue to employ individuals who were previously employed at our competitors or potential competitors. We try to ensure that our employees, consultants, and independent contractors do not use the proprietary information or know-how of others in their work for us, but we may nevertheless be subject to claims that we or our employees, consultants, or independent contractors have inadvertently or otherwise used or disclosed intellectual property, including trade secrets or other proprietary information, of any of our employees’ former employers or other third parties. Litigation may result and be necessary to defend against these claims. If we fail in defending any such claims, in addition to paying monetary damages, we may lose valuable intellectual property rights or personnel, which could adversely impact our business. Even if we are successful in defending against such claims, litigation could result in substantial costs and be a distraction to management and other employees.

 

We may be subject to claims challenging the inventorship of our intellectual property.

 

We may be subject to claims that former employees, collaborators or other third parties have an interest in, or right to compensation, with respect to our current patent and patent applications, future patents or other intellectual property as an inventor or co-inventor. For example, we may have inventorship disputes arise from conflicting obligations of consultants or others who are involved in developing our products. Litigation may be necessary to defend against these and other claims challenging inventorship or claiming the right to compensation. If we fail in defending any such claims, in addition to paying monetary damages, we may lose valuable intellectual property rights, such as exclusive ownership of, or right to use, valuable intellectual property. Such an outcome could have a material adverse effect on our business. Even if we are successful in defending against such claims, litigation could result in substantial costs and be a distraction to management and other employees.

 

We may not be able to protect our intellectual property rights throughout the world.

 

Filing, prosecuting, and defending patents on products, as well as monitoring their infringement in all countries throughout the world would be prohibitively expensive, and our intellectual property rights in some countries can be less extensive than those in the United States. In addition, the laws of some foreign countries do not protect intellectual property rights to the same extent as federal and state laws in the United States. 

 

Competitors may use our technologies in jurisdictions where we have not obtained patent protection to develop their own products and may also export otherwise infringing products to territories where we have patent protection, but enforcement is not as strong as that in the United States. These products may compete with our products. Future patents or other intellectual property rights may not be effective or sufficient to prevent them from competing.

 

  17  

 

 

Many companies have encountered significant problems in protecting and defending intellectual property rights in foreign jurisdictions. The legal systems of certain countries, particularly certain developing countries, do not favor the enforcement of patents, trade secrets, and other intellectual property protection, which could make it difficult for us to stop the marketing of competing products in violation of our proprietary rights generally. Proceedings to enforce our patent rights in foreign jurisdictions, whether or not successful, could result in substantial costs and divert our efforts and attention from other aspects of our business, could put our future patents at risk of being invalidated or interpreted narrowly and our patent applications at risk of not issuing and could provoke third parties to assert claims against us. We may not prevail in any lawsuits that we initiate and the damages or other remedies awarded, if any, may not be commercially meaningful. Accordingly, our efforts to monitor and enforce our intellectual property rights around the world may be inadequate to obtain a significant commercial advantage from the intellectual property that we develop or license.

 

Risks Related to the Ownership of Our ADSs or Ordinary Shares

 

Sales of a substantial number of our ADSs or Ordinary Shares in the public market by our existing shareholders could cause our share price to fall.

 

Sales of a substantial number of our ADSs or Ordinary Shares in the public market, or the perception that these sales might occur, could depress the market price of our ADSs or Ordinary Shares and could impair our ability to raise capital through the sale of additional equity securities. We are unable to predict the effect that sales may have on the prevailing market price of our ADSs or Ordinary Shares.

 

Our principal shareholders, officers and directors beneficially own over 14% of our outstanding Ordinary Shares. They will therefore be able to exert significant control over matters submitted to our shareholders for approval. 

 

As of March 14, 2018, our principal shareholders, officers and directors beneficially own approximately 14.7% of our Ordinary Shares. This significant concentration of share ownership may adversely affect the trading price for our Ordinary Shares because investors often perceive disadvantages in owning shares in companies with controlling shareholders. As a result, these shareholders, if they acted together, could significantly influence or even unilaterally approve matters requiring approval by our shareholders, including the election of directors and the approval of mergers or other business combination transactions. The interests of these shareholders may not always coincide with our interests or the interests of other shareholders.

 

The JOBS Act will allow us to postpone the date by which we must comply with some of the laws and regulations intended to protect investors and to reduce the amount of information we provide in our reports filed with the SEC, which could undermine investor confidence in our company and adversely affect the market price of our ADSs or Ordinary Shares.

 

For so long as we remain an “emerging growth company” as defined in the Jumpstart Our Business Startups Act of 2012, or the JOBS Act, we intend to take advantage of certain exemptions from various requirements that are applicable to public companies that are not “emerging growth companies” including:

 

  the provisions of the Sarbanes-Oxley Act requiring that our independent registered public accounting firm provide an attestation report on the effectiveness of our internal control over financial reporting;

 

  Section 107 of the JOBS Act, which provides that an “emerging growth company” can take advantage of the extended transition period provided in Section 7(a)(2)(B) of the Securities Act of 1933, as amended, or the Securities Act, for complying with new or revised accounting standards. This means that an “emerging growth company” can delay the adoption of certain accounting standards until those standards would otherwise apply to private companies. We may elect to delay such adoption of new or revised accounting standards. As a result of this adoption, our financial statements may not be comparable to companies that comply with the public company effective date; and

 

  any rules that may be adopted by the Public Company Accounting Oversight Board requiring mandatory audit firm rotation or a supplement to the auditor’s report on the financial statements.

 

  18  

 

 

We intend to take advantage of these exemptions until we are no longer an “emerging growth company.” We will remain an emerging growth company until the earlier of (1) the last day of the fiscal year (a) following the fifth anniversary of the date of our first sale of common equity securities pursuant to an effective registration statement under the Securities Act, (b) in which we have total annual gross revenue of at least $1.07 billion, or (c) in which we are deemed to be a large accelerated filer, which means the market value of our Ordinary Shares that is held by non-affiliates exceeds $700 million as of the prior June 30, and (2) the date on which we have issued more than $1.0 billion in non-convertible debt during the prior three-year period.

 

We cannot predict if investors will find our ADSs or Ordinary Shares less attractive because we may rely on these exemptions. If some investors find our ADSs or Ordinary Shares less attractive as a result, there may be a less active trading market for our ADSs or Ordinary Shares, and our market prices may be more volatile and may decline.

 

As a “foreign private issuer” we are permitted, and intend, to follow certain home country corporate governance practices instead of otherwise applicable SEC and Nasdaq requirements, which may result in less protection than is accorded to investors under rules applicable to domestic U.S. issuers.

 

Our status as a foreign private issuer also exempts us from compliance with certain SEC laws and regulations and certain regulations of the Nasdaq Stock Market, including the proxy rules, the short-swing profits recapture rules, and certain governance requirements such as independent director oversight of the nomination of directors and executive compensation. In addition, we will not be required under the Exchange Act of 1934, as amended, or the Exchange Act, to file current reports and financial statements with the SEC as frequently or as promptly as U.S. domestic companies whose securities are registered under the Exchange Act and we will generally be exempt from filing quarterly reports with the SEC. Also, although a recent amendment to the Israeli Companies Law, or the Companies Law, will require us to disclose the annual compensation of our five most highly compensated senior officers on an individual basis (rather than on an aggregate basis, as was permitted under the Companies Law for Israeli public companies listed overseas, such as in the United States, prior to such amendment), this disclosure will not be as extensive as that required of a U.S. domestic issuer. For example, it currently appears as if the disclosure required under Israeli law would be limited to compensation paid in the immediately preceding year without any requirement to disclose option exercises and vested stock options, pension benefits or potential payments upon termination or a change of control. Furthermore, as a foreign private issuer, we are also not subject to the requirements of Regulation FD (Fair Disclosure) promulgated under the Exchange Act.

 

These exemptions and leniencies will reduce the frequency and scope of information and protections to which you are entitled as an investor. 

 

We may be a “passive foreign investment company”, or PFIC, for U.S. federal income tax purposes in the current taxable year or may become one in any subsequent taxable year. There generally would be negative tax consequences for U.S. taxpayers that are holders of our ADSs or Ordinary Shares if we are or were to become a PFIC.

 

Based on the projected composition of our income and valuation of our assets, we do not expect to be a PFIC for 2017, and we do not expect to become a PFIC in the future, although there can be no assurance in this regard. The determination of whether we are a PFIC is made on an annual basis and will depend on the composition of our income and assets from time to time. We will be treated as a PFIC for U.S. federal income tax purposes in any taxable year in which either (1) at least 75% of our gross income is “passive income” or (2) on average at least 50% of our assets by value produce passive income or are held for the production of passive income. Passive income for this purpose generally includes, among other things, certain dividends, interest, royalties, rents and gains from commodities and securities transactions and from the sale or exchange of property that gives rise to passive income. Passive income also includes amounts derived by reason of the temporary investment of funds, including those raised in a public offering. In determining whether a non-U.S. corporation is a PFIC, a proportionate share of the income and assets of each corporation in which it owns, directly or indirectly, at least a 25% interest (by value) is taken into account. The tests for determining PFIC status are applied annually, and it is difficult to make accurate projections of future income and assets which are relevant to this determination. In addition, our PFIC status may depend in part on the market value of our ADSs or Ordinary Shares. Accordingly, there can be no assurance that we currently are not or will not become a PFIC in the future. If we are a PFIC in any taxable year during which a U.S. taxpayer holds our ADSs or Ordinary Shares, such U.S. taxpayer would be subject to certain adverse U.S. federal income tax rules. In particular, if the U.S. taxpayer did not make an election to treat us as a “qualified electing fund,” or QEF, or make a “mark-to-market” election, then “excess distributions” to the U.S. taxpayer, and any gain realized on the sale or other disposition of our ADSs or Ordinary Shares by the U.S. taxpayer: (1) would be allocated ratably over the U.S. taxpayer’s holding period for the ADSs or Ordinary Shares; (2) the amount allocated to the current taxable year and any period prior to the first day of the first taxable year in which we were a PFIC would be taxed as ordinary income; and (3) the amount allocated to each of the other taxable years would be subject to tax at the highest rate of tax in effect for the applicable class of taxpayer for that year, and an interest charge for the deemed deferral benefit would be imposed with respect to the resulting tax attributable to each such other taxable year. In addition, if the U.S. Internal Revenue Service, or the IRS, determines that we are a PFIC for a year with respect to which we have determined that we were not a PFIC, it may be too late for a U.S. taxpayer to make a timely QEF or mark-to-market election. U.S. taxpayers that have held our ADSs or Ordinary Shares during a period when we were a PFIC will be subject to the foregoing rules, even if we cease to be a PFIC in subsequent years, subject to exceptions for U.S. taxpayer who made a timely QEF or mark-to-market election. A U.S. taxpayer can make a QEF election by completing the relevant portions of and filing IRS Form 8621 in accordance with the instructions thereto. We do not intend to notify U.S. taxpayers that hold our ADSs or Ordinary Shares if we believe we will be treated as a PFIC for any taxable year in order to enable U.S. taxpayers to consider whether to make a QEF election. In addition, we do not intend to furnish such U.S. taxpayers annually with information needed in order to complete IRS Form 8621 and to make and maintain a valid QEF election for any year in which we or any of our subsidiaries are a PFIC. U.S. taxpayers that hold our ADSs or Ordinary Shares are strongly urged to consult their tax advisors about the PFIC rules, including tax return filing requirements and the eligibility, manner, and consequences to them of making a QEF or mark-to-market election with respect to our ADSs or Ordinary Shares in the event that we are a PFIC. See “Item 10.E. Taxation — U.S. Federal Income Tax Considerations — Passive Foreign Investment Companies” for additional information.

 

  19  

 

 

We may be subject to securities litigation, which is expensive and could divert management attention.

 

In the past, companies that have experienced volatility in the market price of their stock have been subject to securities class action litigation. We may be the target of this type of litigation in the future. Litigation of this type could result in substantial costs and diversion of management’s attention and resources, which could seriously hurt our business. Any adverse determination in litigation could also subject us to significant liabilities.

 

If securities or industry analysts do not publish or cease publishing research or reports about us, our business or our market, or if they adversely change their recommendations or publish negative reports regarding our business or our shares, our share price and trading volume could decline .

 

The trading market for our ADSs or Ordinary Shares will be influenced by the research and reports that industry or securities analysts may publish about us, our business, our market or our competitors. We do not have any control over these analysts and we cannot provide any assurance that analysts will cover us or provide favorable coverage. If any of the analysts who may cover us adversely change their recommendation regarding our shares, or provide more favorable relative recommendations about our competitors, our share price would likely decline. If any analyst who may cover us were to cease coverage of our company or fail to regularly publish reports on us, we could lose visibility in the financial markets, which in turn could cause our share price or trading volume to decline. 

 

Risks Related to Israeli Law and Our Operations in Israel

 

Our operations are subject to currency and interest rate fluctuations.

 

We incur expenses in U.S. dollars and NIS, but our financial statements are denominated in NIS and presented in NIS and have a convenience translation to U.S. dollars. NIS is our functional currency. The NIS is the currency that represents the principal economic environment in which we operate. As a result, we are affected by foreign currency exchange fluctuations through both translation risk and transaction risk. As a result, we are exposed to the risk that the NIS may appreciate relative to the dollar, or, if the NIS instead devalues relative to the dollar, that the inflation rate in Israel may exceed such rate of devaluation of the NIS, or that the timing of such devaluation may lag behind inflation in Israel. In any such event, the dollar cost of our operations in Israel would increase and our dollar-denominated results of operations would be adversely affected.

 

  20  

 

 

Provisions of Israeli law and our amended and restated articles of association may delay, prevent or otherwise impede a merger with, or an acquisition of, our company, which could prevent a change of control, even when the terms of such a transaction are favorable to us and our shareholders.

 

Israeli corporate law regulates mergers, requires tender offers for acquisitions of shares above specified thresholds, requires special approvals for transactions involving directors, officers or significant shareholders and regulates other matters that may be relevant to such types of transactions. For example, a merger may not be consummated unless at least 50 days have passed from the date on which a merger proposal is filed by each merging company with the Israel Registrar of Companies and at least 30 days have passed from the date on which the shareholders of both merging companies have approved the merger. In addition, a majority of each class of securities of the target company must approve a merger. Moreover, a tender offer for all of a company’s issued and outstanding shares can only be completed if the acquirer receives positive responses from the holders of at least 95% of the issued share capital. Completion of the tender offer also requires approval of a majority of the offerees that do not have a personal interest in the tender offer, unless, following consummation of the tender offer, the acquirer would hold at least 98% of the company’s outstanding shares. Furthermore, the shareholders, including those who indicated their acceptance of the tender offer, may, at any time within six months following the completion of the tender offer, claim that the consideration for the acquisition of the shares does not reflect their fair market value, and petition an Israeli court to alter the consideration for the acquisition accordingly, unless the acquirer stipulated in its tender offer that a shareholder that accepts the offer may not seek such appraisal rights, and the acquirer or the company published all required information with respect to the tender offer prior to the tender offer’s response date.

 

Israeli tax considerations also may make potential transactions unappealing to us or to our shareholders whose country of residence does not have a tax treaty with Israel exempting such shareholders from Israeli tax. See “Item 10.E. Taxation — Israeli Tax Considerations and Government Programs” for additional information.

 

Our amended and restated articles of association also contain provisions that could delay or prevent changes in control or changes in our management without the consent of our board of directors. These provisions include the following:

 

  no cumulative voting in the election of directors, which limits the ability of minority shareholders to elect director candidates; and

 

  the exclusive right of our board of directors to elect a director to fill a vacancy created by the expansion of the board of directors or the resignation, death or removal of a director, which prevents shareholders from being able to fill vacancies on our board of directors.

 

It may be difficult to enforce a judgment of a United States court against us and our officers and directors and the Israeli experts named in this prospectus in Israel or the United States, to assert United States securities laws claims in Israel or to serve process on our officers and directors and these experts.

 

We were incorporated in Israel. Most of our executive officers and directors reside outside of the United States, and all of our assets and most of the assets of these persons are located outside of the United States. Therefore, a judgment obtained against us, or any of these persons, including a judgment based on the civil liability provisions of the U.S. federal securities laws, may not be collectible in the United States and may not necessarily be enforced by an Israeli court. It also may be difficult to affect service of process on these persons in the United States or to assert U.S. securities law claims in original actions instituted in Israel. Additionally, it may be difficult for an investor, or any other person or entity, to initiate an action with respect to United States securities laws in Israel. Israeli courts may refuse to hear a claim based on an alleged violation of United States securities laws reasoning that Israel is not the most appropriate forum in which to bring such a claim. In addition, even if an Israeli court agrees to hear a claim, it may determine that Israeli law and not United States law is applicable to the claim. If United States law is found to be applicable, the content of applicable United States law must be proven as a fact by expert witnesses, which can be a time consuming and costly process. Certain matters of procedure will also be governed by Israeli law. There is little binding case law in Israel that addresses the matters described above. As a result of the difficulty associated with enforcing a judgment against us in Israel, you may not be able to collect any damages awarded by either a United States or foreign court.

 

  21  

 

 

Our headquarters and other significant operations are located in Israel, and, therefore, our results may be adversely affected by political, economic and military instability in Israel.

 

Our executive offices are located in Israel. In addition, most of our officers and directors are residents of Israel. Accordingly, political, economic and military conditions in Israel may directly affect our business. Since the establishment of the State of Israel in 1948, a number of armed conflicts have taken place between Israel and its neighboring Arab countries, the Hamas (an Islamist militia and political group that has historically controlled the Gaza strip) and the Hezbollah (an Islamist militia and political group based in Lebanon). Any hostilities involving Israel or the interruption or curtailment of trade between Israel and its trading partners could adversely affect our operations and results of operations. Ongoing and revived hostilities or other Israeli political or economic factors, such as, an interruption of operations at the Tel Aviv airport, could prevent or delay shipments of our components or products. If continued or resumed, these hostilities may negatively affect business conditions in Israel in general and our business in particular. In the event that hostilities disrupt the ongoing operation of our facilities or the airports and seaports on which we depend to import and export our supplies and product candidates, our operations may be materially adversely affected. 

 

In addition, instability in the region may lead to deterioration in the political and trade relationships that exist between the State of Israel and certain other countries. Any armed conflicts, terrorist activities or political instability in the region could adversely affect business conditions, could harm our results of operations and could make it more difficult for us to raise capital. Parties with whom we do business may sometimes decline to travel to Israel during periods of heightened unrest or tension, forcing us to make alternative arrangements when necessary in order to meet our business partners face to face. Several countries, principally in the Middle East, still restrict doing business with Israel and Israeli companies, and additional countries may impose restrictions on doing business with Israel and Israeli companies if hostilities in Israel or political instability in the region continues or increases. Similarly, Israeli companies are limited in conducting business with entities from several countries. For instance, in 2008, the Israeli legislature passed a law forbidding any investments in entities that transact business with Iran. In addition, the political and security situation in Israel may result in parties with whom we have agreements involving performance in Israel claiming that they are not obligated to perform their commitments under those agreements pursuant to force majeure provisions in such agreements.

 

Our commercial insurance does not cover losses that may occur as a result of an event associated with the security situation in the Middle East. Although the Israeli government has in the past covered the reinstatement value of certain damages that were caused by terrorist attacks or acts of war, we cannot assure you that this government coverage will be maintained or, if maintained, will be sufficient to compensate us fully for damages incurred. Any losses or damages incurred by us could have a material adverse effect on our business. Any armed conflicts or political instability in the region would likely negatively affect business conditions generally and could harm our results of operations.

 

Further, in the past, the State of Israel and Israeli companies have been subjected to economic boycotts. Several countries still restrict business with the State of Israel and with Israeli companies. These restrictive laws and policies may have an adverse impact on our operating results, financial conditions or the expansion of our business. 

 

Your rights and responsibilities as a shareholder will be governed by Israeli law, which differs in some material respects from the rights and responsibilities of shareholders of U.S. companies.

 

The rights and responsibilities of the holders of our ADSs or Ordinary Shares are governed by our amended and restated articles of association and by Israeli law. These rights and responsibilities differ in some material respects from the rights and responsibilities of shareholders in typical U.S.-based corporations. In particular, a shareholder of an Israeli company has certain duties to act in good faith and fairness toward the company and other shareholders and to refrain from abusing its power in the company. See “Item 6.C. Board Practices — Duties of Shareholders” for additional information. There is limited case law available to assist us in understanding the nature of this duty or the implications of these provisions. These provisions may be interpreted to impose additional obligations on holders of our ADSs or Ordinary Shares that are not typically imposed on shareholders of U.S. corporations.

 

  22  

 

 

We received Israeli government grants for certain of our research and development activities. The terms of those grants may require us to pay royalties and to satisfy specified conditions in order to manufacture products and transfer technologies outside of Israel. We may be required to pay penalties in addition to repayment of the grants.

 

Our research and development efforts have been financed in part through royalty-bearing grants in an aggregate amount of approximately NIS 5,901,000 (approximately $1,702,000) that we received from Israel’s Innovation Authority (formerly known as the Office of the Chief Scientist), or the IIA, as of December 31, 2017. With respect to the royalty-bearing grants we are committed to pay royalties at a rate of 3% to 5% on sales proceeds from our products that were developed under IIA programs up to the total amount of grants received, linked to the U.S. dollar and bearing interest at an annual rate of London Interbank Offered Rate, or LIBOR applicable to U.S. dollar deposits. Regardless of any royalty payment, we are further required to comply with the requirements of the Israeli Encouragement of Industrial Research and Development Law, 5744-1984, as amended, and related regulations, or the Research Law, with respect to those past grants. When a company develops know-how, technology or products using IIA grants, the terms of these grants and the Research Law restrict the transfer of such know-how, and the transfer of manufacturing or manufacturing rights of such products, technologies or know-how outside of Israel, without the prior approval of the IIA. Therefore, the discretionary approval of an IIA committee would be required for any transfer to third parties inside or outside of Israel of know-how or manufacturing or manufacturing rights related to those aspects of such technologies. We may not receive those approvals. Furthermore, the IIA may impose certain conditions on any arrangement under which it permits us to transfer technology or development out of Israel.

 

The transfer of IIA-supported technology or know-how outside of Israel may involve the payment of significant amounts, depending upon the value of the transferred technology or know-how, our research and development expenses, the amount of IIA support, the time of completion of the IIA-supported research project and other factors. These restrictions and requirements for payment may impair our ability to sell or otherwise transfer our technology assets outside of Israel or to outsource or transfer development or manufacturing activities with respect to any product or technology outside of Israel. Furthermore, the consideration available to our shareholders in a transaction involving the transfer outside of Israel of technology or know-how developed with IIA funding (such as a merger or similar transaction) may be reduced by any amounts that we are required to pay to the IIA. 

 

Our operations may be disrupted as a result of the obligation of management or key personnel to perform military service.

 

Our employees and consultants in Israel, including members of our senior management, may be obligated to perform one month, and in some cases longer periods, of military reserve duty until they reach the age of 40 (or older, for citizens who hold certain positions in the Israeli armed forces reserves) and, in the event of a military conflict, may be called to active duty. In response to increases in terrorist activity, there have been periods of significant call-ups of military reservists. It is possible that there will be similar large-scale military reserve duty call-ups in the future. Our operations could be disrupted by the absence of a significant number of our officers, directors, employees and consultants. Such disruption could materially adversely affect our business and operations.

 

ITEM 4. INFORMATION ON THE COMPANY

 

A. History and Development of the Company

 

Our legal and commercial name is Nano Dimension Ltd. We were incorporated in the State of Israel in December 1960, and are subject to the Companies Law. We were incorporated under the name Polgat Woolen Industries Kiryat Gat Ltd. On December 30, 1981, our name was changed to Polgat Industries Ltd. On January 1, 1995, our name was changed to Polgat Ltd., and on October 28, 2007, our name was changed to ZBI Ltd. In 1977, we became a public company in Israel and our shares were listed for trade on the TASE, and on October 29, 2014, we changed our name to Nano Dimension Ltd. Our Ordinary Shares are currently traded on the TASE under the symbol NNDM. Our ADSs representing our Ordinary Shares currently trade in the United States on the Nasdaq Capital Market under the symbol “NNDM”.

 

  23  

 

 

From March 7, 2014, until August 25, 2014, we were a “shell corporation” and did not have any business activity, excluding administrative management. On August 25, 2014, we closed the Merger with the Subsidiary, whereby we acquired 100% of the share capital of the Subsidiary. The Subsidiary was incorporated in the State of Israel in July 2012. The Merger resulted in a change of control whereby the management of the Company was replaced by the management of the Subsidiary. Furthermore, as a result of the Merger, the four shareholders of the Subsidiary received an aggregate amount of approximately 37.4% of the issued Ordinary Shares of the Company, as of the date thereof.

 

Our registered office and principal place of business is located at 2 Ilan Ramon St., Ness Ziona 7403635, Israel. Our telephone number in Israel is +972 -73-7509142.

 

Our website address is www.nano-di.com. The information contained on our website or available through our website is not incorporated by reference into and should not be considered a part of this annual report on Form 20-F, and the reference to our website in this annual report on Form 20-F is an inactive textual reference only. Zysman, Aharoni, Gayer and Sullivan & Worcester LLP is our agent in the United States, and its address is 1633 Broadway, New York, NY 10019.

 

We are an emerging growth company, as defined in Section 2(a) of the Securities Act, as implemented under the JOBS Act. As such, we are eligible to, and intend to, take advantage of certain exemptions from various reporting requirements applicable to other public companies that are not emerging growth companies including but not limited to not being required to comply with the auditor attestation requirements of the SEC rules under Section 404 of the Sarbanes-Oxley Act. We could remain an emerging growth company until the earlier of (1) the last day of the fiscal year (a) following the fifth anniversary of the date of our first sale of common equity securities pursuant to an effective registration statement under the Securities Act, (b) in which we have total annual gross revenue of at least $1.07 billion, or (c) in which we are deemed to be a large accelerated filer, which means the market value of our Ordinary Shares that is held by non-affiliates exceeds $700 million as of the prior June 30th, and (2) the date on which we have issued more than $1.0 billion in non-convertible debt during the prior three-year period.

 

We are a foreign private issuer as defined by the rules under the Securities Act and the Exchange Act. Our status as a foreign private issuer also exempts us from compliance with certain laws and regulations of the SEC and certain regulations of the Nasdaq Stock Market, including the proxy rules, the short-swing profits recapture rules, and certain governance requirements such as independent director oversight of the nomination of directors and executive compensation. In addition, we will not be required to file annual, quarterly and current reports and financial statements with the SEC as frequently or as promptly as U.S. domestic companies registered under the Exchange Act.

 

Our capital expenditures for 2017, 2016 and 2015 amounted to NIS 13,286,000 (approximately $3,832,000), NIS 17,496,000 (approximately $4,550,000) and NIS 10,078,000 (approximately $2,582,000), respectively. These expenditures were primarily for purchases of fixed assets, investment in restricted bank deposits and development expenditures capitalized as intangible assets. Our purchases of fixed assets primarily include leasehold improvements, computers, and equipment used for the development of our products, and we financed these expenditures primarily from cash on hand.

 

B. Business Overview

 

We are a leading additive electronics provider. We develop, manufacture and commercialize proprietary 3D, printers and inks. We have been actively developing our 3D printing technology since 2014, and since that time we have listed our securities on the TASE and Nasdaq, and have spent approximately $40 million to build our additive electronics company. We have established our own materials manufacturing facility, and have launched commercialization of the first and only 3D printer capable of producing sensors, conductive geometries, antennas, professional multilayer PCBs and molded connected devices for rapid prototyping and custom additive manufacturing.

 

  24  

 

 

With our unique 3D printing technology, we are targeting the growing demand for electronic devices that require increasingly sophisticated features and rely on printed circuit boards, connected products, encapsulated sensors and antennas. Additive manufacturing industry analysts predict that 3D printed electronics is likely to be the next high-growth application for product innovation, with its market size forecasted to reach $2.8 billion by 2025.

 

We began commercializing our first professional grade 3D Printer, the DragonFly 2020 Pro 3D printer, during the fourth quarter of 2017. The first of its kind 3D printer uses our proprietary inks and integrated software to quickly create functional “smart product” electronics such as sensors, conductive geometries, antennas, professional multilayer PCBs and molded connected devices for rapid prototyping and custom additive manufacturing. .

 

Traditionally, electronic circuitry is developed through a back-and-forth process that involves design, trial and error and third-party manufacturer outsourcing. We believe that the traditional process for developing complex and advanced electronics is outdated and in need of a modern technological solution. Until now, 3D printing technology has been unable to offer a solution for the electronics market, mainly because of the difficulty of printing multiple layers of electrically conductive and dielectric materials at a high resolution that is suitable for professional electronics. We are the first to develop an integrated solution that includes a 3D printer, inkjet technology and software, which together deliver groundbreaking nano-technology. Our integrated solution is redefining and shaping how connected products are designed and made.

 

Our DragonFly 2020 Pro 3D printer uses proprietary liquid nano-conductive and dielectric inks that are designed specifically to print multilayer circuitry and 3D electronics. We believe that our DragonFly 2020 Pro 3D printer will obviate the reliance on third-party manufacturers during the development, short run manufacturing and prototyping of smart products, such as sensors, conductive geometries, antennas, professional multilayer PCBs and molded connected devices for rapid prototyping and custom additive manufacturing.

 

Following the recent launch of our sales and commercialization efforts, and as a part of scaling our operations, we recently opened two Customer Experience Centers, or CECs, one in Israel and one in the United States. The new CECs are designed to accelerate the adoption of additive manufacturing for electronics development and will also serve as customer and reseller training facilities and sales support centers. In order to leverage and expedite our go to market strategy, we partner with value added resellers (VARs) around the world. The VARs provide customers with services such as sales support, demonstrations, technical support and maintenance. The VARs assign dedicated technical support experts that are trained in installing, operating and maintaining the printer and providing technical support and demonstrations for their customers. Our VARs engage actively in sales and tradeshow activities, as well as with customer carte and first response system servicing. As of the end of February 2018, we have VAR relationships in the United States, the United Kingdom, Ireland, Canada, Germany, France, Italy, Belgium, Australia, Turkey and Spain. As we continue with to expand our sales channel presence, we expect to engage with additional top tier VARs operating in the 3D printing industry and ECAD (electronic computer aided design) and MCAD (mechanical computer aided design) software solutions.

 

Industry Overview

 

Additive manufacturing of 3D Printed electronics as part of Industry 4.0

 

Additive manufacturing or 3D printing in general is a process of making a three-dimensional solid object from a digital model. 3D printing is achieved using an additive process, where successive layers of material are laid down in different shapes. 3D printing is also considered distinct from traditional machining techniques, which mostly rely on the removal of material by methods such as cutting or drilling (subtractive processes).

 

We perceive that additive manufacturing is at a defining inflection point by worldwide commitment to industry 4.0 transformation by companies large and small. To underscore the potential of additive manufacturing, during the past 24 months several fortune 500 and other tier one companies operating across a number of distinct industries have made substantial investments to decisively enter the additive manufacturing market. Examples include leading companies in aerospace and defense, dental/cosmetics and apparel and footwear. With the production world increasingly depending on additive manufacturing, we see exciting new printing technologies in metal and in liquid-polymers.

 

The industry 4.0 manufacturing revolution includes the electrification of products across multiple industries and refers to the connectivity, the sensors and electronic circuitry which are crucial in every product, from satellites to sneakers, smart cars and IoT devices. This electrification is the horizon of Nano Dimension and that is where we elevate industry 4.0 – by making additive manufacturing complete with the 3D printing of smart products made digitally. We believe that fully 3D printed smart connected products are the next phase of Industry 4.0.

 

  25  

 

 

Traditional Printed Circuit Boards (PCB)

 

 

A conventional PCB is a board containing a pattern of conducting material, such as copper, which becomes an electrical circuit when electrical components are attached to it. It is the basic platform used to interconnect electronic components and can be found in most electronic products, including computers and computer peripherals, communications equipment, cellular phones, high-end consumer electronics, automotive and aeronautical components and medical and industrial equipment. Conventional PCBs are more product-specific than other electronic components because generally they are unique for a specific electronic device or appliance. Conventional PCBs can be classified as single-sided, double-sided and multilayer boards. 

 

A multilayer electronic circuit contains two or more different conductive layers, while an older single-layer circuit contains only one layer of conductors. In the past, in inexpensive circuits, there were single or dual layer circuits. Advanced circuits, which are required for modern products (such as mobile phones, computer cards and more), contain advanced multilayer circuits with a much larger number of layers. Modern electronics have become more complex and often contain thousands of connections between various components of the same electronic circuit. In order to enable this complexity in a limited area and to prevent electronic short circuits, the connections are divided into a number of layers that are connected within the same multilayer electronic circuit. Our Dragonfly 2020 Pro 3D printer is designed to efficiently print prototype PCBs, circuits and antennas that conform to the requirements of modern complex electronics.

 

One of the main issues with the traditional process of PCB prototype development is the outsource manufacturing delay. Modern and advanced PCBs are complex and are often comprised of more than ten layers. As a general rule, the time for manufacturing depends on the complexity and number of layers that a PCB contains. Consequently the time it takes to receive an advanced PCB prototype from a third party manufacturer may reach several weeks. While the life cycle of modern products is shortening, the need for rapid prototyping increases. Our Dragonfly 2020 Pro 3D printer offers a solution to the pain of a slow time-to-market turnaround of advanced PCB prototypes, and enables developers of PCBs the freedom to innovate and painlessly employ an efficient trial-and-error process on a day to day basis.

 

Another issue with the traditional process of PCB prototyping is confidentiality. The usage of outsource services in order to produce a PCB prototype forces the developer to share the PCB design files of a future product months before the product is expected to reach the market. Our Dragonfly 2020 Pro 3D printer is intended to be an in-house solution to this issue.

 

Market Opportunity

 

The future of the 3D printed electronics market looks promising with opportunities in IoT connected products, communication, computer/peripheral, and defense, automotive industries and in aerospace. We estimate market potential by looking at several market references including the 3D printed electronics market, the total PCB market, and PCB software design market.

 

Technavio’s market research analysts predict that the total PCB market will grow at a CAGR of more than 6% by 2021. Other analysts estimate that the PCB market will reach an estimated $72.6 billion by 2022.

 

Within the total PCB market is the more specific market of PCB design software. We believe that many users of design software would benefit from the use of an in-house 3D electronics printer. Future Market Insights forecasts the global PCB design software market to increase at 12.9% CAGR during 2016-2026, and reach $4.75 billion in revenues by the end of 2026.  

 

  26  

 

 

Additive manufacturing industry analysts predict that 3D printed electronics is likely to be the next high-growth application for product innovation, with its market size forecasted to reach $2.8 billion by 2025. Many industry leaders expect the 3D printed electronics industry to expand quickly as manufacturing companies and consumer industries discover new methods and applications for 3D printed electronic technology. The chart below gives an indication of the size of the 3D printed electronics market, and illustrates that it is both large and growing.

 

 

Source: SmarTech Publishing, 2016

 

Strategy

 

Our strategic objective is to commercialize products, services and technologies to enable additive manufacturing and 3D printing of electronics in production. We are implementing our strategy by selling a 3D printer for electronics and related ink products and by providing on-demand 3D printing services.

 

By creating our own installed-base of printers that require our own dedicated inks – we wish to establish a "Razor and Blades" business model in which our customers buy the printer first and then continue to purchase the dedicated inks over time.

 

We started marketing our products and services worldwide, primarily to companies that develop products with electronic components, including companies in the defense, automotive, consumer electronics, semiconductor, aerospace, and medical industries and to research institutes.

 

  27  

 

 

We intend to further advance our breakthrough technologies and commercialization efforts. To achieve these objectives, we plan to:

 

  Increase our sales of the Dragonfly 2020 Pro 3D printer and advance our commercialization efforts and infrastructure . We believe that our 3D printer has significant and potentially disruptive market potential. As a part of scaling our sales operations, we have recently opened two CECs, one in Israel and one in the United States. The new CECs are designed to accelerate the adoption of additive manufacturing for electronics development and will also serve as customer and reseller training facilities and sales support centers.
     
  Recruiting value-added resellers globally . We intend to increase the number and use of our resellers in order to increase sales and provide technical services to our customers. We aim to double our resellers network in 2018.
     
  Forming alliances with industry leaders. We plan to collaborate with companies in the fields of design and manufacturing in order to expedite the adoption of our technology by the market.
     
  Increasing service bureau activity. We opened an on-demand 3D Printed electronics service bureau and we plan to increase its scale in order to provide access to our new technology by a wide audience and by that we believe we can demonstrate the advantage of our technology, provide an example for other service bureaus and monetize on the service.
     
  Capitalize on our nano-conductive technology products . We plan to exploit our conductive nano-silver ink as a supplemental product to our 3D printers and as a stand-alone product for other purposes that may require silver ink with suitable qualities for advanced printing.
     
  Market and explore other uses for our nano-epoxy ink . We plan to exploit our nano-epoxy dielectric ink as a supplemental product to our 3D printers (as a dielectric material). We are also exploring the potential of our nano-epoxy dielectric ink as a unique stand-alone product that provides mechanical strength, adhesiveness and high thermal resistance with a wide range of applicability.
     

 

Products

 

Nano Dimension’s products currently consist of two main product lines – our Dragonfly 2020 Pro 3D printer and proprietary ink products.

 

Dragonfly 2020 Pro 3D PCB Printer

 

 

  28  

 

 

Our Dragonfly 2020 Pro can print sensors, conductive geometries, antennas, professional multilayer PCBs, and molded connected devices for rapid prototyping and custom additive manufacturing.

 

Our Dragonfly 2020 Pro 3D printer is the first 3D printer that we are aware of that is customized specifically to print multilayer PCBs for advanced electronics. The Dragonfly is designed to allow users the ability to print ready-to-use electronics and smart products in-house, within hours. Possible applications of our products include aerospace, smart cars, IoT-connected products and encapsulated sensors for military applications.

 

Our 3D printer is designed to print electronic conductors and dielectric (non-conductive) layers based on a user’s specific design plan. Our Dragonfly 2020 Pro 3D printer uses at least two types of ink (i.e., conductive and dielectric) in order to lay down successive layers that literally build a ready-to-use electronics. The printer receives digital files as input and converts them into print jobs in order to build the multilayer PCB, antenna or circuit. No cutting or drilling is required in the process of 3D printing of a multilayer PCB with our Dragonfly 2020 Pro 3D Printer.

 

Our Dragonfly 2020 Pro 3D printer includes our dedicated and proprietary print-job editing software, which enables smooth and seamless usage for our customers. Our software is not intended to be a replacement for PCB or computer aided design (CAD) design software, but rather conveniently allows our customers to continue to design their smart parts with their preferred PCB/CAD design software. After the user has concluded the design, the files are simply sent to the 3D printer in Gerber (.gbr) or stereolithographic (STL) format with a user-friendly interface, similar to the usage of commonplace inkjet and laser printers. Our proprietary software employs traditional methods of 3D printing by virtually converting print jobs (the PCB) into a large number of thin slices, which are then printed one on top of the other.

 

  29  

 

 

In July 2016, we completed the development of the initial version of our software package, which is integrated in our DragonFly 2020 Pro 3D printer. The software package, called ‘Switch,’ enables preparation of production files of printed electronic circuits using the DragonFly 2020 Pro 3D printer. The software supports customary formats in the electronics industry such as Gerber files, as well as vertical interconnect access (VIA) and DRILL files. The ‘Switch’ software presents a unique interface that displays Gerber files and an accurate and detailed description of the PCB’s structure, which facilitates a highly precise conversion to a 3D file format.

 

Additionally, and depending on the sales channel employed, we will offer different levels of product warranty and after-sales service. We anticipate that channel partners, such as established distributors will typically be key to providing support and warranty services to the wider market. In instances where deeper and more strategic relationships are at stake, we intend to provide dedicated account management, both in terms of support and servicing, which may be fee or subscription-based. We plan to support and train a select number of experienced channel partners with the capabilities to ensure that end customers are satisfied with our products and any after-sales service and support that we may offer in the future.

 

Prior to the commercial launch of our DragonFly 2020 Pro 3D printer, and starting in the second half of 2016, we began leasing a previous version of our 3D printer to beta customers as a part of our beta plan. In June 2017, we announced that we had successfully completed recruiting new applicants to our beta program. The feedback received in the beta program has been used to upgrade and refine the technology, printing capabilities, and the work processes of our 3D printer. Following the positive feedback that we received from our customers, we decided that the targets of our beta program were achieved, allowing us to move on to the next stage, targeting early access commercial sales. During the beta program, we provided leading companies and partners worldwide the opportunity to lease the company’s DragonFly 2020 3D printer. The companies and partners in the beta program spanned a variety of industries such as defense, consumer goods, medical devices, and financial services. A total of 16 customers participated in our beta program, and have been using our 3D printers. In the second half of 2017 we initiated early access commercial sales of our DragonFly 2020 Pro 3D printer.

 

Our Dragonfly 2020 Pro 3D printer has multiple advantages, including:

 

  In-house prototypes and low volume production. Our Dragonfly 2020 Pro 3D printer offers its users an efficient, quick, available, accessible and immediate solution for prototype production of smart products such as encapsulated sensors, antennas, multilayer PCBs and free-form geometry 3D Circuits. Currently, electronics companies and others engaged in the development of products based on PCBs are forced to rely on service suppliers that manufacture PCBs through a complex and inefficient process.

 

Turn-around of multilayer advanced smart parts can often take weeks and involves significant costs. Also, for electronics in development, several cycles of prototyping are often necessary until the specs of the final electronic part are created. This means that a developer of a new electronic product may have to repeat the process of going through a service supplier several times during lab testing – which may increase cost and slow the momentum of product development.

 

Our Dragonfly 2020 Pro 3D printer obviates the reliance on external service suppliers and provides electronics companies and others the luxury of an office-friendly 3D printer in their in-house research laboratory with the ability to print prototypes of PCBs as required for electronic device development – all during a relatively short period of time.

 

  Information security and professional secrecy . Contracting with external service suppliers (outsourcing) in order to create prototypes of PCBs during early stages of the development process of novel electronic devices may unnecessarily compromise the security of sensitive and confidential information. Currently, however, there is hardly a practical solution. Our Dragonfly 2020 Pro 3D printer is the ideal answer.

 

  Industry first . We believe that we are a pioneer and a leader in our industry. We are not aware of any other company in the global electronics market that currently offers a 3D inkjet printer that prints professional grade smart parts.

 

  30  

 

 

Supplementary Products

 

Conductive Ink

 

We have developed a uniquely formulated nano-conductive ink for use in our 3D printers. Using advanced nano-technology, we have developed a liquid ink that contains nano-particles of conductive materials such as silver and copper. Nano-particles are particles between 1 and 100 nanometers in size. By employing this technology, we were able to create a liquid ink that maintains its transport properties and electric conductivity. The liquid properties of our nano-conductive ink allow us to take advantage of inkjet printing technology for fast and efficient 3D printing of PCBs.

 

Our wet-chemistry approach to making silver nano-particles starts with a raw material compound containing silver which may be acquired from a number of chemical suppliers. The patented process, licensed from the Hebrew University, is highly efficient and very clean. We can reliably extract 10 to 100 nano-meter sized particles of pure silver. We are able to control the size, shape and dispersion of the silver nano-particles in accordance with specific printing requirements. We can also formulate inks for a variety of substrates and printing profiles.

 

In addition, in July 2016, we filed a patent application with the USPTO for the development of a new nano-metric conductive ink, which is based on a unique synthesis. The new nano-particle synthesis further minimizes the size of the silver nano-particles particles in our ink products. The new process achieves silver nano-particles as small as 4 nano-meters. We believe that accurate control of nano-particles’ size and surface properties will allow for improved performance of our DragonFly 2020 Pro 3D printer. The innovative ink enables lower melting temperatures and more complete sintering (fusing of particles into solid conductive trace), leading to an even higher level of conductivity. The innovative ink has the potential to accelerate printing speeds and save ink for the 3D printing of electronics.

 

Dielectric Ink

 

Our proprietary dielectric ink is a unique ink that contains dielectric and dielectric materials that are not electrically conductive. The use of non-conductive ink is crucial in the production of multilayer circuit boards, as the conducting layers that are placed on top of each other must be separated by dielectric layers. Our internally developed, proprietary dielectric ink is a unique one-part-epoxy material. The dielectric ink can withstand high temperature (e.g., five hundred degrees Fahrenheit and more) without distorting its shape, which is a necessary requirement for professional PCBs.

 

Both our nano-conductive and dielectric ink products have completed development stages and we have begun to manufacture these products in-house. We plan to commercialize these ink products as a supplementary product to our 3D printers and as separate and independent products. Based on our proprietary technology, our ink products may be adjusted specifically for additional uses.

 

Intellectual Property

 

We seek patent protection as well as other effective intellectual property rights for our products and technologies in the United States and internationally. Our policy is to pursue, maintain and defend intellectual property rights developed internally and to protect the technology, inventions and improvements that are commercially important to the development of our business.

 

We have a growing portfolio of four issued U.S. patents and eighteen provisional and non-provisional patent applications with the USPTO, WIPO filed through the PCT, and with the respective patent offices of China, Europe, South Korea and Japan. A provisional patent application is a preliminary application that can be filed less formally than a non-provisional application, and establishes a priority date for the patenting process for the invention disclosed therein.

 

  31  

 

 

Our growing patent portfolio can be divided into four main areas:

 

1.               Mechanical : covering printer components and peripherals with three granted U.S. patents (9,227,444, 9,259,933, and 9,878,549), as well as several patent applications, directed to components and systems varying from, print head calibration systems, to stirring containers for inks.

 

2.               Chemical : covering ink compositions and related nanoparticles, both dielectric and conducting.

 

3.               Applications : covering 3D printing applications and computer applications. The 3D printing applications are directed to various methods of printing PCBs, flexible printed circuits (FPCs) and high density interconnects (HDIs) circuits with embedded components.

 

4.               Industrial Design/Design : covering the ornamental aspects of the printer and various printer components, with one granted U.S. patent (D543,612).

 

In addition to patent applications, in September 2014, we entered into an exclusive license agreement with the Research and Development Company of the Hebrew University of Jerusalem, Ltd., or “Yissum”, for two patents that cover the unique method of manufacturing our consumable nano-conductive ink for the 3D printing of electronic circuits. The agreement was amended and restated in April 2015. Pursuant to the license agreement, we will be required to pay Yissum low to mid-single digit percentage royalties on sales of our conductive ink. The exclusive license agreement is in effect for the longer of remaining usable life of the patents and patent applications, or 15 years from the first commercial sale of a product relating to the licensed technology in such country.

 

Competition

 

Many companies providing 3D printing services concentrate their efforts on printing prototypes in resin polymers or other plastics. We differentiate ourselves from these companies by focusing on the niche market of in-house PCB printing using a combination of nano-conductive and dielectric inks, and to that extent we consider ourselves a pioneer in our industry. However, it may be possible for more developed 3D printing companies to adapt their products to print PCBs. Accordingly, our competitors may include other companies providing 3D printing services with substantial customer bases and working history. Older, well-established companies providing 3D printing and rapid prototyping services with records of success currently attract customers. There can be no assurance that we can maintain a competitive position against current or future competitors, particularly those with greater financial, marketing, service, technical and other resources. Our failure to maintain a competitive position within the market could have a material adverse effect on our business, financial condition and results of operations.

 

We also compete with companies that use traditional prototype development of PCBs and customized manufacturing technologies, and expect future competition to arise from the development of new technologies or techniques.

 

To the best of our knowledge, our 3D inkjet printer is the first and only one of its kind, and as of the date of this annual report on Form 20-F, there are no three-dimensional ink injection printers that print multilayer electronic circuits for the purposes of in-house PCB prototype development. However, there are many companies worldwide that manufacture PCBs.

 

In the United States and globally, we face many competitors that specialize in contract electronic manufacturing, and specifically the manufacturing of prototype PCBs. We estimate that there are approximately 1,800 companies in the United States that manufacture or provide PCBs on a per-order basis.

 

Research and Development

 

As of the date hereof, we have completed the development of our proprietary nano-conductive ink products and have commenced manufacturing in our in-house laboratory.

 

Also, we have completed the development of the alpha version of our 3D printer, and on April 14, 2015, we introduced the alpha version publicly. In August 2015, we introduced our beta 3D printer to a number of customers, and in the second half of 2016, we initiated our beta plan and delivered printers to customers. In the second half of 2017 we commenced commercial sales.

 

  32  

 

 

From time to time we may also explore the application of our technology to additional areas within 3D printing and other industries.

 

In September 2016, we conducted a successful test for 3D printing of conductive traces onto a treated fabric in collaboration with a leading European functional textiles company. The test was carried out using our unique silver nanoparticle conductive ink and our DragonFly 2020 3D Printer platform. During the test, conductors were printed in several patterns in order to perform functionality tests, including conductivity, elasticity, rubbing, etc. The results demonstrated that the printed silver conductors had high enough elasticity to match the properties of the fabric.

 

In January 2017, we successfully 3D printed a series of multilayer rigid PCBs, connected through printed flexible conductive connections. This process provides a solution to traditional production limitations in the electronics industry, such as continuous transfer of conductors between circuits, loose contacts, size of connections between the circuits as well as fabrication of multilayer flexible material.

 

In January 2017, we successfully 3D printed electrical circuits, in which we embedded electrical components, through placement, as an integral part of the printing process. We filed a patent application with the USPTO for this unique development.

 

In February 2017, we received a budget from MEIMAD committee of the IIA which will be used to finance a project to develop 3D printing of advanced ceramic materials in inkjet technology. The total approved budget for this project is NIS 1.4 million (approximately $372,000), of which the IIA will finance 50%. The terms of the grant provide that we will be required to pay royalties on future sales of any funded technology up to the full grant amount.

 

For the years ended December 31, 2017, 2016, 2015 and 2014, we incurred NIS 38,947,000 (approximately $11,233,000), NIS 15,525,000 (approximately $4,038,000), NIS 11,089,000 (approximately $2,842,000) and NIS 3,339,000 (approximately $858,000), respectively, of research and development expenses. Our research and development expenses for the year ended December 31, 2016 do not include expenses in an amount of NIS 16,273,000 (approximately $4,232,000) that were capitalized as an intangible asset.

 

  33  

 

 

Grants from Israel’s Innovation Authority

 

Our research and development efforts are financed in part through royalty-bearing grants from the IIA. As of December 31, 2017, we have received the aggregate amount of NIS 5,901,000 (approximately $1,702,000) from the IIA for the development of our 3D printer and nano-inks. With respect to such grants we are committed to pay certain royalties up to the total grant amount. Regardless of any royalty payment, we are further required to comply with the requirements of the Research Law, with respect to those past grants. When a company develops know-how, technology or products using IIA grants, the terms of these grants and the Research Law restrict the transfer of such know-how, and the transfer of manufacturing or manufacturing rights of such products, technologies or know-how outside of Israel, without the prior approval of the IIA. We do not believe that these requirements will materially restrict us in any way.

 

Production and Manufacturing

 

We purchase the raw materials required for the production of our products, including components of 3D printers and materials to produce our nano-inks products. To date, all of our printers, including our DragonFly2020 Pro, are manufactured in-house. We have entered into a non-exclusive agreement with a global manufacturer that would serve as our primary manufacturer and supplier for our commercial 3D printers when we are required to scale up our production further or expand it to additional global geographies. Pursuant to the agreement, we are not obligated to make any minimum purchases and prices will be agreed upon between us from time to time and based on specific purchase orders. The extent of this and any other engagement with third party manufacturers will be managed to match production volumes.

 

With respect to our ink products, we intend to keep full control of the value chain, from research and development through self-manufacturing and global sales. In September 2016, we initiated a production facility to support the commercialization and production of our proprietary nano-conductive ink and dielectric ink. In October 2017 we announced the opening of our nano-particle ink production facility to support the commercialization and production of our proprietary nano-conductive ink and dielectric ink for our DragonFly 2020 Pro 3D printer. We believe that the size and capacity of this facility, located in the same building as our offices, will be sufficient to support our future commercialization activities. In January 2018 we achieved certification for two international standards- the OHSAS 18001:2007 for occupational health and safety within the workplace and the ISO 14001:2015 Standard – EMS (Environmental Management System).

 

Sales and Marketing

 

We began commercializing our first professional grade 3D Printer, the DragonFly 2020 Pro 3D printer, during the fourth quarter of 2017. As a part of scaling our operations, we recently opened two CECs, one in Israel and one in the United States. The new CECs are designed to accelerate the adoption of additive manufacturing for electronics development and will also serve as customer and reseller training facilities and sales support centers. In order to leverage and expedite our go to market strategy, we partner with VARs around the world. The VARs provide customers with services such as sales support, demonstrations, technical support and maintenance. The VARs assign dedicated technical support experts that are trained in installing, operating and maintaining the printer and providing technical support and demonstrations for their customers. Our VARs engage actively in sales and tradeshow activities, as well as with customer carte and first response system servicing. As of the end of February 2018, we have VAR relationships in the United States, the United Kingdom, Ireland, Canada, Germany, France, Italy, Belgium, Australia, Turkey and Spain. As we continue with to expand our sales channel presence, we expect to engage with additional top tier 3D printer VARs.

 

C. Organizational Structure

 

We currently have two wholly owned subsidiaries: Nano Dimension Technologies Ltd., which was incorporated in 2012 in the State of Israel, and Nano Dimension USA Inc., which was incorporated in 2017 in Delaware.

 

D. Property, Plant and Equipment

 

Our offices, research and development facility and in-house laboratory are located at our headquarters at 2 Ilan Ramon, Ness Ziona 74036, Israel, where we currently occupy approximately 36,791 square feet. Following a recent expansion, we lease our headquarters under three separate leases. The first lease, which accounts for about 42% of our office space, ends on August 31, 2018, the second lease, which accounts for about 35% of our office space, ends on December 31, 2023, with an exit point at the end of 2018, and the third lease, which accounts for about 23% of our office space, ends on August 31, 2021. The total monthly rent payment is currently NIS 170,023 (approximately $49,040). As of March 2018, we also have offices in Santa Clara, California, where we occupy approximately 1,915 square feet.

 

  34  

 

 

We consider that our current office space is sufficient to meet our anticipated needs for the foreseeable future and is suitable for the conduct of our business.

 

ITEM 4A. UNRESOLVED STAFF COMMENTS

 

None.

 

ITEM 5. OPERATING AND FINANCIAL REVIEW AND PROSPECTS

 

MANAGEMENT’S DISCUSSION AND ANALYSIS OF
FINANCIAL CONDITION AND RESULTS OF OPERATIONS

 

The following discussion and analysis should be read in conjunction with our financial statements and related notes included elsewhere in this annual report on Form 20-F. This discussion and other parts of this annual report on Form 20-F contain forward-looking statements based upon current expectations that involve risks and uncertainties. Our actual results and the timing of selected events could differ materially from those anticipated in these forward-looking statements as a result of several factors, including those set forth under “Risk Factors” and elsewhere in this annual report in Form 20-F. We report financial information under IFRS as issued by the IASB and none of the financial statements were prepared in accordance with generally accepted accounting principles in the United States. Unless otherwise indicated, U.S. dollar convenience translations of NIS amounts presented in this annual report on Form 20-F for the period ended on December 31, 2017 are translated using the rate of NIS 3.467 to $1.00, the exchange rate reported by the Bank of Israel on December 31, 2017, and U.S. dollar convenience translations of NIS amounts presented in this annual report on Form 20-F for the period ended on December 31, 2016 are translated using the rate of NIS 3.845 to $1.00, the exchange rate reported by the Bank of Israel on December 31, 2016, and U.S. dollar convenience translations of NIS amounts presented in this annual report on Form 20-F for the period ended on December 31, 2015 are translated using the rate of NIS 3.902 to $1.00, the exchange rate reported by the Bank of Israel on December 31, 2015.

 

Overview

 

To date, we have generated insignificant revenues from the sale and lease of our products. We have only recently begun commercializing our products and our ability to generate significant revenues and achieve profitability depends on our ability to successfully complete the development of, and to commercialize, our products. As of December 31, 2017, we had an accumulated deficit of NIS 133,609,000 (approximately $38,537,000). Our financing activities are described below under “Liquidity and Capital Resources.” We currently estimate that we have the necessary capital in order to finalize the development of our 3D printer and to establish our commercial infrastructure.

 

5.A Operating Results

 

Operating Expenses

 

Our current operating expenses consist of three components – research and development expenses, sales and marketing expenses, and general and administrative expenses.

 

In the fourth quarter of 2017 we decided to present our sales and marketing expenses separate from other operating expenses. Thus, for comparison we have reclassified the expenses in the previous years.

 

Research and Development Expenses, net

 

Our research and development expenses consist primarily of salaries and related personnel expenses, subcontractor expenses, patent registration fees, rental fees, materials, and other related research and development expenses. 

 

  35  

 

 

The following table discloses the breakdown of research and development expenses:

 

    Year ended December 31,  
    2015     2016     2017     2017  
(in thousands)   NIS     U.S. dollars -
Convenience
Translation
 
                         
Payroll     11,268       21,589       26,711       7,704  
Subcontractors     7,696       1,179       542       156  
Patent registration     238       130       206       59  
Materials     2,299       6,119       6,637       1,915  
Rental fees and maintenance     814       1,485       2,967       856  
Depreciation     242       683       1,591       459  
Other expenses     378       1,453       875       252  
Development expenses recognized as Intangible Assets     (11,463 )     (16,273 )     -       -  
Grants     (383 )     (840 )     (582 )     (168 )
      11,089       15,525       38,947       11,233  

 

Subcontractor expenses include expenses for development consultants and service providers, which are not employees. The services provided by these consultants and service providers include, but are not limited to, chemistry consulting, software and electronics subcontractors and consulting and chip processing consulting.

 

Our development expenses are presented net of government grants and net of development expenses that were capitalized as intangible assets.

 

Sales and Marketing Expenses

 

Sales and marketing expenses consist primarily of salaries, marketing and advertising services, depreciation, rental fees, and travel.

 

The following table discloses the breakdown of sales and marketing expenses:

 

    Year ended December 31,  
    2015     2016     2017     2017  
(in thousands)   NIS     U.S. dollar -  Convenience Translation  
                         
Payroll     1,458       2,873       5,387       1,554  
Marketing and advertising     386       737       1,377       397  
Depreciation     -       -       36       10  

Travel abroad

    8       174       845       244  
Rental fees and maintenance     64       80       214       62  
Total     1,916       3,864       7,859       2,267  

 

General and Administrative Expenses

 

General and administrative expenses consist primarily of salaries, professional service fees, director fees, office expenses, taxes and fees, and other general and administrative expenses.

 

The following table discloses the breakdown of general and administrative expenses:

 

    Year ended December 31,  
    2015     2016     2017     2017  
(in thousands)   NIS     U.S. dollars -  Convenience Translation  
                         
Payroll     1,750       3,156       2,741       791  
Professional services     4,139       6,183       5,255       1,516  
Director pay     2,643       2,850       1,773       511  
Office expense     315       887       1,014       292  
Fees     108       174       245       71  
Travel abroad     253       568       308       89  
Rental fees and maintenance     -       -       301       87  
Other expenses     163       842       464       134  
Total     9,371       14,660       12,101       3,491  

 

  36  

 

 

Comparison of the year ended December 31, 2017 to the year ended December 31, 2016 to the year ended December 31, 2015

 

Results of Operations

 

    December 31,     December 31,  
    2015     2016     2017     2015     2016     2017  
(in thousands)   NIS     U.S. dollars - Convenience Translation  
Revenues     -       175       2,984       -       46       861  
Cost of revenues     -       72       1,471       -       19       424  
Cost of revenues- amortization of intangible     -       668       2,676       -       174       772  
Gross loss     -       565       1,163       -       147       335  
Research and development expenses, net     11,089       15,525       38,947       2,842       4,038       11,233  
General and administrative expenses     9,371       14,660       12,101       2,402       3,813       3,491  
Sales and marketing expenses     1,916       3,864       7,859       491       1,005       2,267  
Operating loss     22,376       34,614       60,070       5,735       9,003       17,326  
Finance expense (income), net     (1,384 )     (144 )     2,935       (355 )     (38 )     847  
Total comprehensive loss     20,992       34,470       63,005       5,380       8,965       18,173  
Loss attributable to holders of Ordinary Shares     20,992       34,470       63,005       5,380       8,965       18,173  

 

Revenues

 

Our revenues for the year ended December 31, 2017 amounted to NIS 2,984,000 (approximately $861,000), representing an increase of NIS 2,809,000 (approximately $815,000) or 1,605%, compared to NIS 175,000 (approximately $46,000) for the year ended December 31, 2016. The increase is due to additional leases and sales of our products during 2017. Our revenues are derived from sales of our printers to certain customers, lease of our printers to beta customers, and from ink deliveries to those clients.

 

Our revenues for the year ended December 31, 2016 amounted to NIS 175,000 (approximately $46,000). Our revenues were derived from lease of our printers to beta customers, and from ink deliveries to those clients. We did not have revenues prior to 2016.

 

Cost of Revenues

 

Our cost of revenues for the year ended December 31, 2017 amounted to NIS 4,147,000 (approximately $1,196,000), representing an increase of NIS 3,407,000 (approximately $1,003,000) or 460%, compared to NIS 740,000 (approximately $193,000), for the year ended December 31, 2016. Cost of revenues consists of NIS 1,471,000 (approximately $424,000) and an additional NIS 2,676,000 (approximately $772,000) in respect of amortization of intangible assets, representing an increase of NIS 1,399,000 (approximately $405,000) or 1,943%, compared to NIS 72,000 (approximately $19,000) and an additional increase of NIS 2,008,000 (approximately $598,000), compared to NIS 668,000 (approximately $174,000) in respect of amortization of intangible assets.

 

We did not have cost of revenues prior to 2016. In the fourth quarter of 2016, we began to amortize the intangible asset arising from capitalization of development expenses. The estimated useful lives of the capitalized development costs is 10 years.

 

Gross Loss

 

Our gross loss for the year ended December 31, 2017 amounted to NIS 1,163,000 (approximately $335,000), compared to NIS 565,000 (approximately $147,000) for the year ended December 31, 2016. We did not have gross loss prior to 2016.

 

Research and Development Expenses, net

 

Our research and development expenses for the year ended December 31, 2017 amounted to NIS 38,947,000 (approximately $11,233,000), representing an increase of NIS 23,422,000 (approximately $7,195,000) or 151%, compared to NIS 15,525,000 (approximately $4,038,000) for the year ended December 31, 2016. The increase is mainly a result of the cessation of the capitalization of development cost in the fourth quarter of 2016.

 

  37  

 

 

Our research and development expenses for the year ended December 31, 2017 are presented net of government grants in the amount of NIS 582,000 (approximately $168,000).

 

Our research and development expenses for the year ended December 31, 2016, amounted to NIS 15,525,000 (approximately $4,038,000), representing an increase of NIS 4,436,000 (approximately $1,196,000) or 40%, compared to NIS 11,089,000 (approximately $2,842,000), for the year ended December 31, 2015. The increase was primarily attributable to an increase of NIS 10,321,000 (approximately $2,684,000) in salaries and related personnel expenses, reflecting an increase in the number of employees (as of the year ended 2015, we had 34 research and development employees, and as of the year ended 2016, we had 75 research and development employees), and an increase of NIS 3,820,000 (approximately $993,000) in materials expenses, due to accelerating our research and development activities.

 

Our research and development expenses for the year ended December 31, 2016, are presented net of government grants in the amount of NIS 840,000 (approximately $218,000) and net of development expenses recognized as intangible assets in the amount of NIS 16,273,000 (approximately $4,232,000).

 

Sales and marketing Expenses

 

Our sales and marketing expenses totaled NIS 7,859,000 (approximately $2,267,000) for the year ended December 31, 2017, an increase of NIS 3,995,000 (approximately $1,262,000), or 103%, compared to NIS 3,864,000 (approximately $1,005,000) for the year ended December 31, 2016. The increase resulted primarily from an increase of NIS 2,514,000 (approximately $725,000) in salaries and related personnel expenses, reflecting an increase in the number of sales and marketing employees, and an increase of NIS 671,000 (approximately $194,000) in travel expenses.

 

Our sales and marketing expenses totaled NIS 3,864,000 (approximately $1,005,000) for the year ended December 31, 2016, an increase of NIS 1,948,000 (approximately ($514,000), or 101.7%, compared to NIS 1,916,000 (approximately $491,000) for the year ended December 31, 2015. The increase resulted primarily from an increase of NIS 1,415,000 (approximately $368,000) in salaries and related personnel expenses, reflecting an increase in the number of sales and marketing employees.

 

General and Administrative Expenses

 

Our general and administrative expenses totaled NIS 12,101,000 (approximately $3,491,000) for the year ended December 31, 2017, a decrease of NIS 2,559,000 (approximately $322,000), or 17%, compared to NIS 14,660,000 (approximately $3,813,000) for the year ended December 31, 2016. The decrease resulted primarily from a decrease of NIS 415,000 (approximately $120,000) in salaries and related personnel expenses, reflecting a decrease in options expenses, and a decrease of NIS 928,000 (approximately $268,000) in professional services expenses for accounting, legal, and other general and administrative activities.

 

Our general and administrative expenses totaled NIS 14,660,000 (approximately $3,813,000) for the year ended December 31, 2016, an increase of NIS 5,289,000 (approximately ($1,411,000), or 56%, compared to NIS 9,371,000 (approximately $2,402,000) for the year ended December 31, 2015. The increase resulted primarily from an increase of NIS 1,406,000 (approximately $366,000) in salaries and related personnel expenses, reflecting an increase in the number of general and administrative employees, and an increase of NIS 2,044,000 (approximately $532,000) in professional services expenses for accounting, legal, and other general and administrative activities.

 

Operating Loss

 

As a result of the foregoing, our operating loss for the year ended December 31, 2017 was NIS 60,070,000 (approximately $17,326,000), as compared to an operating loss of NIS 34,614,000 (approximately $9,003,000) for the year ended December 31, 2016, an increase of NIS 25,456,000 (approximately $8,323,000), or 74%.

 

As a result of the foregoing, our operating loss for the year ended December 31, 2016, was NIS 34,614,000 (approximately $9,003,000), as compared to an operating loss of NIS 22,376,000 (approximately $5,735,000) for the year ended December 31, 2015, an increase of NIS 12,238,000 (approximately $3,183,000), or 54.7%.

   

Finance Expense and Income

 

Finance expense and income mainly consist of bank fees and other transactional costs, changes in the fair value of certain price adjustment mechanisms that were provided to investors who participated in certain fund raising rounds, and exchange rate differences.

 

  38  

 

 

We recognized net financial expense of NIS 2,935,000 (approximately $847,000) for the year ended December 31, 2017, compared to net financial income of NIS 144,000 (approximately $38,000) for the year ended December 31, 2016. The increase is primarily due to an increase in finance expense related to exchange rate differences.

 

We recognized net financial income of NIS 144,000 (approximately $38,000) for the year ended December 31, 2016, compared to net financial expense of NIS 1,384,000 (approximately $355,000) for the year ended December 31, 2015. The decrease is primarily due to a decrease in finance income related to revaluation of derivative instruments, resulting from changes during 2015 in the fair value of certain price adjustment mechanisms that were provided to investors who participated in certain fund raising rounds.

  

Total Comprehensive Loss

 

As a result of the foregoing, our loss for the year ended December 31, 2017 was NIS 63,005,000 (approximately $18,173,000), as compared to NIS 34,470,000 (approximately $8,965,000) for the year ended December 31, 2016 an increase of NIS 28,535,000 (approximately $9,208,000), or 83%.

 

As a result of the foregoing, our loss for the year ended December 31, 2016, was NIS 34,470,000 (approximately $8,965,000), as compared to NIS 20,992,000 (approximately $5,380,000) for the year ended December 31, 2015, an increase of NIS 13,478,000 (approximately $3,505,000), or 64.2%.

   

Critical Accounting Policies and Estimate

 

We describe our significant accounting policies more fully in Note 2 to our financial statements for the year ended December 31, 2017, included elsewhere in this annual report on Form 20-F. We believe that the accounting policies below are critical in order to fully understand and evaluate our financial condition and results of operations.

 

We prepare our financial statements in accordance with IFRS as issued by the IASB. At the time of the preparation of the financial statements, our management is required to use estimates, evaluations, and assumptions which affect the application of the accounting policy and the amounts reported for assets, obligations, income, and expenses. Any estimates and assumptions are continually reviewed. The changes to the accounting estimates are credited during the period in which the change to the estimate is made.

 

Revenue Recognition

 

We early adopted IFRS 15, Revenue from Contracts with Customers, which provides new guidance on revenue recognition as from January 1, 2017 on a retrospective basis. Based on the examination of the guidance of the standard, no adjustments have been required to be made to the revenue previously recognized, as in 2016 the Company's main revenues were from leases transactions accounted for under International Accounting Standard, or IAS, 17. Accordingly, comparative figures have not been restated to reflect the impact of the retrospective implementation of the standard. The Company recognizes revenue when the customer obtains control over the promised goods or services. The revenue is measured according to the amount of the consideration to which the Company expects to be entitled in exchange for the goods or services promised to the customer, other than amounts collected for third parties. On the contract’s inception date the Company assesses the goods or services promised in the contract with the customer and identifies as a performance obligation any promise to transfer to the customer goods or services (or a bundle of goods or services) that are distinct. The Company identifies goods or services promised to the customer as being distinct when the customer can benefit from the goods or services on their own or in conjunction with other readily available resources and the Company’s promise to transfer the goods or services to the customer is separately identifiable from other promises in the contract.

 

Intangible Assets

 

In August 2015, we started recognizing intangible assets arising from internal development. The capitalization is the outcome of meeting all the criteria in IAS 38 Intangible Assets , which are (i) development costs can be measured reliably, (ii) the product or process is technically and commercially feasible, (iii) future economic benefits are probable, and (iv) we have the intention and sufficient resources to complete development and to use or sell the asset. Development expenses in the period until August 1, 2015 were expensed as incurred. During the fourth quarter of 2016, we started delivering our products to beta customers and as such, we started to amortize the intangible assets arising from capitalization of development expenses. In subsequent periods, capitalized development expenditure is measured at cost less accumulated amortization and accumulated impairment losses. The estimated useful lives of the capitalized development costs is 10 years.

 

Stock-Based Compensation

 

Employees and other service providers of the Company may receive benefits by way of share-based compensation settled with company options and warrants exercised for Ordinary Shares. The cost of transactions with employees settled with capital instruments is measured based on the fair value of the capital instruments on the granting date. The fair value is determined using an accepted options pricing model. The model is based on share price, grant date and on assumptions regarding expected volatility, expected lifespan, expected dividend, and a no risk interest rate.

 

  39  

 

 

The cost of the transactions settled with capital instruments is recognized in profit or loss together with a corresponding increase in the equity over the period in which the performance and/or service takes place, and ending on the date on which the relevant employees are entitled to the benefits, or the Vesting Period. The aggregate expense recognized for transactions settled with capital instruments at the end of each reporting date and until the Vesting Period reflects the degree to which the Vesting Period has expired and our best estimate regarding the number of warrants that have ultimately vested. The expense or income in profit or loss reflects the change of the aggregate expense recognized as of the end of the reported period.

 

We selected the Black-Scholes-Merton (Black-Scholes), and the binomial model, as our option pricing models to estimate the fair value of our options awards. The option-pricing model requires a number of assumptions:

 

Expected dividend yield - The expected dividend yield assumption is based on our historical experience and expectation of no future dividend payouts. We have historically not paid cash dividends and have no foreseeable plans to pay cash dividends in the future.

 

Volatility - Since the Company’s shares started trading on a stock exchange market only in August 2014 (before that date the Company was under a different name and was involved in a different activity), quoted prices data of our Ordinary Shares is limited. In case of insufficient historical data for a company, the expected volatility is based on similar companies’ stock volatility.

 

Risk free interest rate - The risk free interest rate is based on the yield of governmental bonds with equivalent terms.

 

Estimated term - An option’s estimated term is the estimated amount of time the holder will hold the option before the exercise, based on the expiration date of the option and, in some cases, such as for employees, an assumption regarding exercise before the expiration date.

 

Share price - The share price is determined according to the last known closing price of our Ordinary Shares at the grant date.

 

5.B Liquidity and Capital Resources

 

Overview

 

Since our inception through December 31, 2017, we have funded our operations principally with NIS 150,828,000 (approximately $40,481,000) from the issuance of Ordinary Shares and warrants. As of December 31 2017, we had NIS 21,159,000 (approximately $6,103,000) in cash.

 

The table below presents our cash flows:

 

    Year ended December 31,  
    2015     2016     2017     2015     2016     2017  
(in thousands)   NIS     U.S. dollars - Convenience Translation  
Operating activities     (12,989 )     (22,737 )     (56,886 )     (3,330 )     (5,914 )     (16,408 )
                                                 
Investing activities     (10,078 )     (17,496 )     (13,286 )     (2,582 )     (4,550 )     (3,832 )
                                                 
Financing activities     56,364       53,475       46,928       14,445       13,908       13,536  
                                                 
Net increase (decrease) in cash     33,297       13,242       (23,244 )     8,533       3,444       (6,704 )

 

  40  

 

 

Operating Activities

 

Net cash used in operating activities of NIS 56,886,000 (approximately $16,408,000) during the year ended December 31, 2017 was primarily used for payment of NIS 26,314,000 (approximately $7,590,000) in salaries and related personnel expenses. The remaining amount was for other expenses. 

 

Net cash used in operating activities of NIS 22,737,000 (approximately $5,914,000) during the year ended December 31, 2016 was primarily used for payment of NIS 20,556,000 (approximately $5,346,000) in salaries and related personnel expenses. The remaining amount was for other expenses. 

 

Net cash used in operating activities of NIS 12,989,000 (approximately $3,330,000) during the year ended December 31, 2015 was primarily used for payment of NIS 7,152,000 (approximately $1,833,000) in salaries and related personnel expenses. The remaining amount was for other expenses.

 

Investing Activities

 

Net cash used in investing activities of NIS 13,286,000 (approximately $3,832,000) during 2017 primarily used for investments of our cash in fixed assets.

 

Net cash used in investing activities of NIS 17,496,000 (approximately $4,550,000) during 2016 primarily reflects development expenditure capitalized as intangible assets and investments of our cash in fixed assets.

 

Net cash used in investing activities of NIS 10,078,000 (approximately $2,582,000) during 2015 primarily reflects development expenditure capitalized as intangible assets and investments of our cash in fixed assets.

   

Financing Activities

 

Net cash provided by financing activities in the year ended December 31, 2017 consisted of NIS 46,928,000 (approximately $13,536,000) of net proceeds, mainly from the issuance of Ordinary Shares.

 

Net cash provided by financing activities in the year ended December 31, 2016 consisted of NIS 53,475,000 (approximately $13,908,000) of net proceeds, mainly from the issuance of Ordinary Shares and warrants.

 

Net cash provided by financing activities in the year ended December 31, 2015 consisted of NIS 56,364,000 (approximately $14,445,000) of net proceeds, mainly from the issuance of Ordinary Shares and warrants.

 

  41  

 

 

In January 2015, we issued an aggregate of 1,508,572 Ordinary Shares pursuant to a private placement, at a price of NIS 1.40 (approximately $0.3539) per share. In addition, we issued warrants to purchase up to 1,508,572 Ordinary Shares, 50% of which have an exercise price of NIS 1.75 (approximately $0.4424) per share, and 50% of which have an exercise price of NIS 2.25 (approximately $0.5688) per share. These warrants will expire as follows: (i) warrants to purchase 754,286 Ordinary Shares will expire 18 months from the date of issuance, and (ii) warrants to purchase 754,286 Ordinary Shares will expire 36 months from the date of issuance.

 

As an extension to this private placement, in April 2015, we issued an aggregate of 285,715 Ordinary Shares to Eli Yoresh, one of our directors, and Itschak Shrem, our Chairman, at a price per share of NIS 1.40 (approximately $0.3539). In addition, we issued warrants to purchase up to 285,715 Ordinary Shares, 50% of which at an exercise price of NIS 1.75 (approximately $0.4424) per share, and 50% of which at an exercise price of NIS 2.25 (approximately $0.5688) per share. These warrants will expire as follows: (i) warrants to purchase 142,858 of our Ordinary Shares will expire 18 months from the date of issuance, and (ii) warrants to purchase 142,857 of our Ordinary Shares will expire 36 months from the date of issuance.

 

In March 2015, we issued an aggregate of 3,956,545 Ordinary Shares pursuant to a private placement, at a price of NIS 1.65 (approximately $0.4075) per share.

 

In July 2015, we issued an aggregate of 7,671,089 Ordinary Shares pursuant to a private placement, at a price of NIS 5.50 (approximately $1.4451) per share. In addition, we issued warrants to purchase up to 3,835,546 Ordinary Shares with an exercise price of NIS 9.00 (approximately $2.3647) per share. These warrants will expire 24 months from the date of issuance.

 

In December 2015, we issued, as an extension to the issuance in July 2015, an aggregate of 1,552,877 Ordinary Shares pursuant to a private placement, at a price of NIS 5.50 (approximately $1.4451) per share. In addition, we issued warrants to purchase up to 776,440 Ordinary Shares with an exercise price of NIS 9.00 (approximately $2.3647) per share. These warrants will expire 24 months from the date of issuance.

 

In September 2016, we completed a public offering of 2,125,275 ADSs (representing 10,626,375 Ordinary Shares) at a price of $6.50 per ADS, and net proceeds to us from the sale of the shares was approximately $12,055,000.

 

In May and June 2017, we issued an aggregate of 11,552,809 Ordinary Shares pursuant to a private placement, at a price of NIS 4.20 (approximately $1.17) per share, and net proceeds to us from the sale of the shares was approximately NIS 44,228,000 million (approximately $12,393,000).

 

Current Outlook

 

We have financed our operations to date primarily through proceeds from issuance of our Ordinary Shares. We have incurred losses and generated negative cash flows from operations since 2012. To date, we have generated insignificant revenues from the sale and lease of our products.

 

We expect that our existing cash will be sufficient to fund our current operations until at least the end of 2018; however, we expect that we will require additional capital to support the mass production of our products.

 

In addition, our operating plans may change as a result of many factors that may currently be unknown to us, and we may need to seek additional funds sooner than planned. Our future capital requirements will depend on many factors, including:

 

  the progress and costs of our research and development activities;
     
  the progress in the launch of the commercial DragonFly 2020 Pro 3D printer;

 

  42  

 

 

  the costs of manufacturing our 3D printer and ink products;
     
  the costs of filing, prosecuting, enforcing and defending patent claims and other intellectual property rights;
     
  the potential costs of contracting with third parties to provide marketing and distribution services for us or for building such capacities internally; and
     
  the magnitude of our general and administrative expenses.

 

Until we can generate significant recurring revenues, we expect to satisfy our future cash needs through debt or equity financing. We cannot be certain that additional funding will be available to us on acceptable terms, if at all. If funds are not available, we may be required to delay, reduce the scope of, or eliminate research or development plans for, or commercialization efforts with respect to our products. This may raise substantial doubts about our ability to continue as a going concern.

 

5.E Off-Balance Sheet Arrangements

 

We currently do not have any off-balance sheet arrangements.

 

5.E Tabular Disclosure of Contractual Obligations

 

The following table summarizes our significant contractual obligations at December 31, 2017:

 

    Total     Less than
1 year
    1-3 years     3-5 years     More than
5 years
 
    (in thousands of U.S. dollars - Convenience Translation)  
Facility   $ 980       575       304       101          
Motor vehicles     227       134       93                  
Suppliers and service providers     1,570       920       100       550          
Liability in respect of government grants (*)     1,172       339       833                  

   

(*) The contractual obligation in respect of government grants presented above is based on our estimation regarding expected revenues, thus there is no certainty that the liability will be settled in 1-3 years as stated above.

 

  43  

 

 

ITEM 6. DIRECTORS, SENIOR MANAGEMENT AND EMPLOYEES

 

A. Directors and Senior Management

 

The following table sets forth information regarding our executive officers, key employees and directors as of March 14, 2018:

 

Name   Age   Position
         
Itschak Shrem   71   Co-Chairman of the Board of Directors
         
Avi Reichental   61   Co-Chairman of the Board of Directors
         
Amit Dror   42   Chief Executive Officer, Director
         
Yael Sandler   31   Chief Financial Officer
         
Simon Anthony-Fried   44   President of Nano Dimension USA, Director
         
Ofir Baharav (3)   49   Director
         
Irit Ben-Ami (1) (2) (3)   57   Director
         
Roni Kleinfeld (1) (2) (3)   61   Director
         
Abraham Nahmias (3)   63   Director
         
Eli Yoresh (1) (2) (3)   48   Director

 

(1) Member of our Audit Committee.
(2) Member of our Compensation Committee.
(3) Indicates independent director under Nasdaq Stock Market rules.

  

Itschak Shrem, Co-Chairman of the Board of Directors

 

Mr. Itschak Shrem  has served on our board of directors as Chairman since April 2014. Mr. Shrem has more than 40 years of experience in financial markets and venture capital. He has been the Managing Director of Yaad Consulting 1995 Ltd. since 1995. In 1993, Mr. Shrem founded Pitango Venture Capital Fund (formerly, Polaris) and served as a Partner of Pitango Funds I, II and III. In 1991, Mr. Shrem founded Dovrat Shrem Ltd, an investment banking, management and technology company. Prior to that, he spent 15 years at Clal Israel Ltd., where he served in various capacities, including Chief Operating Officer and was responsible for capital markets and insurance businesses. Mr. Shrem has been the Chairman of the Board of BreedIT Corp. since December 31, 2013. He has been a Director of Eden Spring Ltd. since October 2010. Mr. Shrem served as a Director of Globe Oil Exploration Limited until 2016. He served on the boards of a number of high-profile public institutions, including the Tel-Aviv Sourasky Medical Center, and the Weizman Institute. From 1991 to 2010, Mr. Shrem served as the Chairman of Leader Holdings and Investments Ltd. and Polar Communications Ltd., both TASE-listed companies engaged in investment banking and venture capital. Since 2004, Mr. Shrem has served as the Chairman of Sphera Funds Management Ltd. He served as a Director of Ormat Industries Ltd. from 2012 to 2015. He served as a Director of Retalix Ltd. from January 2008 to 2012. Mr. Shrem holds a B.A in Economics and Accounting from Bar-Ilan University and an M.B.A. from Tel-Aviv University, Israel.

 

  44  

 

 

Avi Reichental, Co-Chairman of the Board of Directors

 

Mr. Avi Reichental has served on our board of directors since April 2017, and as our co-Chairman since December 2017. Mr. Reichental has served as a general partner at OurCrowd First since August 2016. In 2015, Mr. Reichental founded XponentialWorks, Inc., and has served as its chairman and chief executive officer since that time. Prior to that, and from 2003 to 2015, Mr. Reichental served as the president, chief executive officer and director of 3D Systems Corp. (NYSE:DDD). From 1981 to 2003, Mr. Reichental held senior executive leadership positions with Sealed Air Corp. (NYSE:SEE). Since 2015, Mr. Reichental has served as a director of Harman International Industries Inc. (NYSE: HAR). Mr. Reichental is also founder and chairman of Centaur, ElasticMedia, and Nexa3D. Mr. Reichental is part of Singularity University’s core faculty, serves as a Trustee of Cooper-Hewitt Smithsonian’s Design Museum and is a member of the XPRIZE Innovation Board. Mr. Reichental served on the board of Harman until its successful sale to Samsung. Mr. Reichental is an active inventor and has co-invented 35 patents. Mr. Reichental is also a Vice Chairman of Techniplas.

 

Amit Dror, Chief Executive Officer, Director

 

Mr. Amit Dror  has served as our Chief Executive Officer and director since August 2014. Mr. Dror co-founded Eternegy Ltd. in 2010 and served as its Chief Executive Officer and a director from 2010 to 2013. Mr. Dror also co-founded the Milk & Honey Distillery Ltd. in 2012. He developed vast experience in project, account and sales management across a range of roles at ECI Telecom Ltd., Comverse Technology, Inc., Eternegy Ltd. and Milk & Honey Distillery Ltd. Mr. Dror has a background that covers technology management, software, business development, fundraising and complex project execution. Mr. Dror is a Merage Institute Graduate. 

 

Yael Sandler, Chief Financial Officer

 

Ms. Yael Sandler has served as our Chief Financial Officer since June 2015. From 2014 until 2015, Ms. Sandler served as the Group Controller of RealMatch Ltd. From 2011 through December 2014, Ms. Sandler held various positions at Somekh-Chaikin (KPMG Israel), where she gained valuable experience working with public companies and companies pursuing initial public offerings. Ms. Sandler completed the professional course of the Israeli Navy in 2005 and served as a submarine simulator instructor and commander until 2007. Ms. Sandler is a Certified Public Accountant in Israel. Ms. Sandler earned a B.A. with honors in Accounting and Economics from the Hebrew University of Jerusalem and a M.B.T with honors from the College of Management in Rishon LeZion.

 

Simon Anthony-Fried, President of Nano Dimension USA, Director

 

Mr. Simon Fried  has served as our Chief Business Officer and director since August 2014. In January 2018 Mr. Fried relocated to California, and was appointed as the President of our wholly-owned subsidiary, Nano Dimension USA Inc. Mr. Fried was a co-founder of Diesse Solutions Ltd., a project management, risk and marketing consultancy, and served as its Chief Executive Officer from 2004 to 2014. He has worked as a risk management and corporate governance consultant to the Financial Services Authority in the United Kingdom and as a senior strategy consultant at Monitor Company, a Boston based boutique strategy consulting firm. Mr. Fried has a background that covers marketing and sales strategy, management, business development, financial services regulation, fundraising and c-suite consulting. Mr. Fried has worked extensively on global projects in both the B2B and B2C markets driving significant strategic change to global marketing organizations. He also currently serves as a director of the Milk & Honey Distillery Ltd. Mr. Fried holds a B.Sc. in Experimental Psychology from University College London, an M.Sc. in Judgment and Risk from Oxford University and an M.B.A. from SDA Bocconi in Milan. 

 

Ofir Baharav, Director

 

Mr. Ofir Baharav  has served on our board of directors since November 2015. Mr. Baharav is currently a partner in Stratus Venture Group. Mr. Baharav is a seasoned global executive with extensive experience in the United States, Israel, Japan, Europe and China. He has held executive and board level management positions in private and public high-tech companies that operate Internet, semiconductors, 3D printing and security businesses.  Mr. Baharav was the Vice President, Products of Stratasys from 2014 to 2015, the Founder and Chief Executive Officer of XJet Solar from 2007 to 2014, Executive Vice President, Products of Credence among other roles, (Nasdaq: CMOS) from 2003 to 2007, President of Optonics 2001 to 2003 (sold to Credence), and Founder and President of RelayHealth Corporation (acquired by McKesson (Nasdaq: MCK)) from 1998 to 2001. Mr. Baharav serves on the boards of RealConnex, NRG Innovations and Breezer Cooling. Mr. Baharav holds an M.B.A from Warwick Business School UK.

 

  45  

 

 

Irit Ben-Ami, Director

 

Ms. Irit Ben-Ami has served on our board of directors since November 2012. Ms. Ben-Ami is a member of the Institute of Certified Public Accountants in Israel as well as of the Israel Bar Association. Ms. Ben-Ami founded the law office of Pitaro-Ben Ami in 2007 and was a partner there until 2009. Ms. Ben-Ami currently serves as member of the board of directors of several public companies, including Medivie Therapeutic Ltd. (TASE: MDVI) since 2014, and Together Startup Network Ltd. (TASE: TGTR) since 2016. Ms. Ben-Ami holds a Bachelor’s degree (cum laude) in Law (LL.B.) from Sha’arei Mishpat College, a B.A. (with honors) in Economics and Accounting from Haifa University and an M.A. in Health Systems Management (M.H.A.) from Ben Gurion University, and was engaged in the past in academic aspects of labor law and corporate law as a practitioner at Bar Ilan University, Ben Gurion University and at the Sha’arei Mishpat College.

 

Roni Kleinfeld, Director

 

Mr. Roni Kleinfeld has served on our board of directors since November 2012. He has over 25 year experience as a chief executive officer in public and private companies. He was the CEO of Maariv Holdings Ltd. from 1993 to 2002, the CEO of Hed Artzi Records Ltd. from 2002 to 2007, the CEO of Maariv- Modiin Publishing House Ltd. from 2007 to 2010, and the CEO of OMI Ltd. from 2010 to 2011. Mr. Kleinfeld has also served as director of many companies over the past ten years, including: Excite Ltd. from April 2007 to April 2011, Makpel Ltd. from July 2007 to March 2010, Elbit Imaging Ltd. (Nasdaq: EMITF) since May 2010, Elran Ltd. from July 2010 to November 2016, Dancher Ltd. from April 2012 to January 2014, Mendelson Ltd. from 2012 to December 2016, White Smoke Ltd. since June 2012, Edri – El Ltd. since July 2015 and Cofix Group Ltd. since April 2015, and Luzon Group since January 2017. Mr. Kleinfeld has a B.A. in economics from the Hebrew University in Jerusalem.

 

Abraham Nahmias, Director

 

Mr. Abraham Nahmias  has served on our board of directors since August 2014. Mr. Nahmias has been a managing partner of the Nahmias-Grinberg C.P.A (Isr.) since 1985. Mr. Nahmias currently serves as a director in the following companies: Threecopper Ltd. (since 2010), Orad Ltd. (since 2012), Allium Medical Solutions Ltd. (since 2014), Eviation aircraft Ltd. (since 2016), Trueleaf Ltd. (since 2016), Allevetix Ltd. (since 2016), and Cellect Biomed Ltd. (since July 2014). Mr. Nahmias has a B.A. in Economy and Accountancy from the Tel Aviv University, and is a certified public accountant in Israel.

 

  46  

 

 

Eli Yoresh, Director

 

Mr. Eli Yoresh  has served on our board of directors since April 2014. Mr. Yoresh is a seasoned executive with over 15 years of executive and financial management experience, mainly, with companies from the financial, technology and industrial sectors. Since October 2010, Mr. Yoresh has served as a director and Chief Financial Officer at Foresight Autonomous Holdings Ltd. (TASE: FRST). Mr. Yoresh served as the Chief Executive Officer of Tomcar Global Holdings Ltd., a global manufacturer of off-road vehicles, from 2005 to 2008. Mr. Yoresh served as a director at Greenstone Industries Ltd. (TASE: GRTN) from January 2013 to June 2015, and as the Chairman of both Gefen Biomed investments Ltd. (TASE: GEFEN) from April 2013 to July 2015 and Zmicha Investment House Ltd. (TASE: TZMI-M) from February 2013 to July 2015. Mr. Yoresh holds a B.A. in Business Administration from the College of Management in Israel and an M.A. in Law from Bar-Ilan University in Israel. Mr. Yoresh is a Certified Public Accountant in Israel.

 

Family Relationships

 

There are no family relationships between any members of our executive management and our directors.

 

Arrangements for Election of Directors and Members of Management

 

With the exception of our director, Abraham Nahmias, who was appointed by Michael Ilan, one of our shareholders, there are no arrangements or understandings with major shareholders, customers, suppliers or others pursuant to which any of our executive management or our directors were selected. See “Item 7.B. Related Party Transactions” for additional information.

 

B. Compensation

 

Compensation

 

The following table presents in the aggregate all compensation we paid to all of our directors and senior management as a group for the year ended December 31, 2017. The table does not include any amounts we paid to reimburse any of such persons for costs incurred in providing us with services during this period.

 

All amounts reported in the tables below reflect the cost to the Company, in thousands of U.S. dollars, for the year ended December 31, 2017. Amounts paid in NIS are translated into U.S. dollars at the rate of NIS 3.467 = U.S.$1.00, based on the average representative rate of exchange between the NIS and the U.S. dollar as reported by the Bank of Israel in the year ended December 31, 2017.

 

   

Salary and

Related

Benefits, including Pension,

Retirement

and Other

Similar

Benefits

    Share
Based
Compensation
 
All directors and senior management as a group, consisting of 10 persons   $ 715,000     $ 459,000  

 

In accordance with the Companies Law, the table below reflects the compensation granted to our five most highly compensated officers during or with respect to the year ended December 31, 2017.

 

  47  

 

 

Annual Compensation- in thousands of U.S. dollars - Convenience Translation

 

Executive Officer  

Salary and
Related
Benefits, including Pension,

Retirement

and Other

Similar

Benefits

    Share
Based
Compensation
    Total  
                   
Amit Dror   $ 198     $ 66     $ 264  
                         
Simon Anthony-Fried   $ 197     $ 66     $ 263  
                         
Sharon Fima (1)   $ 195     $ 66     $ 261  
                         
Yael Sandler   $ 165     $ 32     $ 197  
                         
Itschak Shrem   $ 104     $ 66     $ 170  

 

 

(1) On November 20, 2017, Mr. Fima resigned from his role as Chief Technology Officer and as a member of the board of directors.

 

Employment Agreements with Executive Officers

 

We have entered into written employment agreements with each of our executive officers. All of these agreements contain customary provisions regarding noncompetition, confidentiality of information and assignment of inventions. However, the enforceability of the noncompetition provisions may be limited under applicable law. In addition, we have entered into agreements with each executive officer and director pursuant to which we have agreed to indemnify each of them up to a certain amount and to the extent that these liabilities are not covered by directors and officers insurance. Members of our senior management are eligible for bonuses each year. The bonuses are payable upon meeting objectives and targets that are set by our chief executive officer and approved annually by our board of directors that also set the bonus targets for our chief executive officer.

 

For a description of the terms of our options and option plans, see “Item 6.E. Share Ownership below.

 

Directors’ Service Contracts

 

Other than with respect to our directors that are also executive officers, we do not have written agreements with any director providing for benefits upon the termination of his employment with our company.

 

C. Board Practices

 

Introduction

 

Our board of directors presently consists of nine members. We believe that Ms. Ben-Ami and Messrs. Baharav, Kleinfeld, Nahmias, and Yoresh are “independent” for purposes of Nasdaq Stock Market rules. Our amended and restated articles of association provides that the number of board of directors’ members shall be set by the general meeting of the shareholders provided that it will consist of not less than three and not more than twelve members. Pursuant to the Companies Law, the management of our business is vested in our board of directors. Our board of directors may exercise all powers and may take all actions that are not specifically granted to our shareholders or to management. Our executive officers are responsible for our day-to-day management and have individual responsibilities established by our board of directors. Our Chief Executive Officer is appointed by, and serves at the discretion of, our board of directors, subject to the employment agreement that we have entered into with him. All other executive officers are appointed by our Chief Executive Officer. Their terms of employment are subject to the approval of the board of directors’ compensation committee and of the board of directors, and if such terms of employment are not consistent with our compensation policy, then such terms require the approval of our shareholders, and are subject to the terms of any applicable employment agreements that we may enter into with them.

 

  48  

 

 

Each director, will hold office until the annual general meeting of our shareholders for the year in which his or her term expires, unless he or she is removed by a majority vote of our shareholders at a general meeting of our shareholders or upon the occurrence of certain events, in accordance with the Companies Law and our amended and restated articles of association.

 

In addition, our amended and restated articles of association allow our board of directors to appoint directors to fill vacancies on our board of directors or in addition to the acting directors (subject to the limitation on the number of directors), until the next annual general meeting or special general meeting in which directors may be appointed or terminated.

 

Under the Companies Law, nominations for directors may be made by any shareholder holding at least one percent of our outstanding voting power. However, any such shareholder may make such a nomination only if a written notice of such shareholder’s intent to make such nomination has been given to our board of directors. Any such notice must include certain information, the consent of the proposed director nominee(s) to serve as our director(s) if elected and a declaration signed by the nominee(s) declaring that there is no limitation under the Companies Law preventing their election and that all of the information that is required to be provided to us in connection with such election under the Companies Law has been provided.

 

Under the Companies Law, our board of directors must determine the minimum number of directors who are required to have accounting and financial expertise. In determining the number of directors required to have such expertise, our board of directors must consider, among other things, the type and size of the company and the scope and complexity of its operations. Our board of directors has determined that the minimum number of directors of our company who are required to have accounting and financial expertise is two.

 

The board of directors may elect one director to serve as the chairman of the board of directors to preside at the meetings of the board of directors, and may also remove that director as chairman. Pursuant to the Companies Law, neither the chief executive officer nor any of his or her relatives is permitted to serve as the chairman of the board of directors, and a company may not vest the chairman or any of his or her relatives with the chief executive officer’s authorities. In addition, a person who reports, directly or indirectly, to the chief executive officer may not serve as the chairman of the board of directors; the chairman may not be vested with authorities of a person who reports, directly or indirectly, to the chief executive officer; and the chairman may not serve in any other position in the company or a controlled company, but he or she may serve as a director or chairman of a controlled company. However, the Companies Law permits a company’s shareholders to determine, for a period not exceeding three years from each such determination, that the chairman or his or her relative may serve as chief executive officer or be vested with the chief executive officer’s authorities, and that the chief executive officer or his or her relative may serve as chairman or be vested with the chairman’s authorities. Such determination of a company’s shareholders requires either: (1) the approval of at least two-thirds of the shares of those shareholders present and voting on the matter (other than controlling shareholders and those having a personal interest in the determination); or (2) that the total number of shares opposing such determination does not exceed 2% of the total voting power in the company. Currently, we have a separate chairman and chief executive officer.

 

The board of directors may, subject to the provisions of the Companies Law, delegate any or all of its powers to committees of the board, and it may, from time to time, revoke such delegation or alter the composition of any such committees, subject to certain limitations. Unless otherwise expressly provided by the board of directors, the committees shall not be empowered to further delegate such powers. The composition and duties of our audit committee, financial statement examination committee and compensation committee are described below.

 

The board of directors oversees how management monitors compliance with our risk management policies and procedures, and reviews the adequacy of the risk management framework in relation to the risks faced by us. The board of directors is assisted in its oversight role by an internal auditor. The internal auditor undertakes both regular and ad hoc reviews of risk management controls and procedures, the results of which are reported to our audit committee.

 

  49  

 

 

External Directors

 

Under the Companies Law, except as provided below, companies incorporated under the laws of the State of Israel that are publicly traded, including Israeli companies with shares listed on the Nasdaq, are required to appoint at least two external directors who meet the qualification requirements set forth in the Companies Law. The definitions of an external director under the Companies Law and independent director under Nasdaq Stock Market rules are similar such that it would generally be expected that our two external directors will also comply with the independence requirement under Nasdaq Stock Market rules.

 

Pursuant to regulations under the Companies Law, the board of directors of a company such as us is not required to have external directors if: (i) the company does not have a controlling shareholder (as such term is defined in the Companies Law); (ii) a majority of the directors serving on the board of directors are “independent,” as defined under Nasdaq Rule 5605(a)(2); and (iii) the company follows Nasdaq Rule 5605(e)(1), which requires that the nomination of directors be made, or recommended to the board of directors, by a Nominating Committee of the board of directors consisting solely of independent directors, or by a majority of independent directors. The Company meets all these requirements. On November 20, 2017, our board of directors resolved to adopt the corporate governance exemption set forth above, and accordingly we no longer have external directors as members of our board of directors.

 

Fiduciary Duties of Office Holders

 

The Companies Law imposes a duty of care and a duty of loyalty on all office holders of a company.

 

The duty of care requires an office holder to act with the level of skill with which a reasonable office holder in the same position would have acted under the same circumstances. The duty of care of an office holder includes a duty to use reasonable means to obtain:

 

  information on the advisability of a given action brought for his approval or performed by him by virtue of his position; and
     
  all other important information pertaining to these actions.

 

The duty of loyalty of an office holder requires an office holder to act in good faith and for the benefit of the company, and includes a duty to:

 

  refrain from any conflict of interest between the performance of his duties in the company and his performance of his other duties or personal affairs;
     
  refrain from any action that constitutes competition with the company’s business;
     
  refrain from exploiting any business opportunity of the company to receive a personal gain for himself or others; and
     
  disclose to the company any information or documents relating to the company’s affairs which the office holder has received due to his position as an office holder.

 

  50  

 

 

Approval of Related Party Transactions under Israeli Law

 

General

 

Under the Companies Law, we may approve an action by an office holder from which the office holder would otherwise have to refrain, as described above, if:

 

  the office holder acts in good faith and the act or its approval does not cause harm to the company; and
     
  the office holder disclosed the nature of his or her interest in the transaction (including any significant fact or document) to the company at a reasonable time before the company’s approval of such matter.

 

Disclosure of Personal Interests of an Office Holder

 

The Companies Law requires that an office holder disclose to the company, promptly, and, in any event, not later than the board meeting at which the transaction is first discussed, any direct or indirect personal interest that he or she may have and all related material information known to him or her relating to any existing or proposed transaction by the company. If the transaction is an extraordinary transaction, the office holder must also disclose any personal interest held by:

 

  the office holder’s relatives; or
     
  any corporation in which the office holder or his or her relatives holds 5% or more of the shares or voting rights, serves as a director or general manager or has the right to appoint at least one director or the general manager.

 

Under the Companies Law, an extraordinary transaction is a transaction:

 

  not in the ordinary course of business;
     
  not on market terms; or
     
  that is likely to have a material effect on the company’s profitability, assets or liabilities.

 

The Companies Law does not specify to whom within us nor the manner in which required disclosures are to be made. We require our office holders to make such disclosures to our board of directors.

 

Under the Companies Law, once an office holder complies with the above disclosure requirement, the board of directors may approve a transaction between the company and an office holder, or a third party in which an office holder has a personal interest, unless the articles of association provide otherwise and provided that the transaction is not detrimental to the company’s interest. If the transaction is an extraordinary transaction, first the audit committee and then the board of directors, in that order, must approve the transaction. Under specific circumstances, shareholder approval may also be required. A director who has a personal interest in an extraordinary transaction, which is considered at a meeting of the board of directors or the audit committee, may not be present at this meeting or vote on this matter, unless a majority of the board of directors or the audit committee, as the case may be, has a personal interest. If a majority of the board of directors has a personal interest, then shareholder approval is generally also required.

 

Under the Companies Law, all arrangements as to compensation of office holders require approval of the compensation committee and board of directors, and compensation of office holders who are directors must be also approved, subject to certain exceptions, by the shareholders, in that order.

 

  51  

 

 

Disclosure of Personal Interests of a Controlling Shareholder

 

Under the Companies Law, the disclosure requirements that apply to an office holder also apply to a controlling shareholder of a public company. Extraordinary transactions with a controlling shareholder or in which a controlling shareholder has a personal interest, including a private placement in which a controlling shareholder has a personal interest, as well as transactions for the provision of services whether directly or indirectly by a controlling shareholder or his or her relative, or a company such controlling shareholder controls, and transactions concerning the terms of engagement of a controlling shareholder or a controlling shareholder’s relative, whether as an office holder or an employee, require the approval of the audit committee or the compensation committee, as the case may be, the board of directors and a majority of the shares voted by the shareholders of the company participating and voting on the matter in a shareholders’ meeting. In addition, the shareholder approval must fulfill one of the following requirements:

 

  at least a majority of the shares held by shareholders who have no personal interest in the transaction and are voting at the meeting must be voted in favor of approving the transaction, excluding abstentions; or
     
  the shares voted by shareholders who have no personal interest in the transaction who vote against the transaction represent no more than 2% of the voting rights in the company.

 

In addition, any extraordinary transaction with a controlling shareholder or in which a controlling shareholder has a personal interest with a term of more than three years requires the abovementioned approval every three years; however, such transactions not involving the receipt of services or compensation can be approved for a longer term, provided that the audit committee determines that such longer term is reasonable under the circumstances.

 

The Companies Law requires that every shareholder that participates, in person, by proxy or by voting instrument, in a vote regarding a transaction with a controlling shareholder, must indicate in advance or in the ballot whether or not that shareholder has a personal interest in the vote in question. Failure to so indicate will result in the invalidation of that shareholder’s vote.

 

The term “controlling shareholder” is defined in the Companies Law as a shareholder with the ability to direct the activities of the company, other than by virtue of being an office holder. A shareholder is presumed to be a controlling shareholder if the shareholder holds 50% or more of the voting rights in a company or has the right to appoint the majority of the directors of the company or its general manager.

 

Duties of Shareholders

 

Under the Companies Law, a shareholder has a duty to refrain from abusing its power in the company and to act in good faith and in an acceptable manner in exercising its rights and performing its obligations to the company and other shareholders, including, among other things, voting at general meetings of shareholders on the following matters:

 

  amendment of the articles of association;
     
  increase in the company’s authorized share capital;
     
  merger; and
     
  the approval of related party transactions and acts of office holders that require shareholder approval.

 

A shareholder also has a general duty to refrain from oppressing other shareholders.

 

The remedies generally available upon a breach of contract will also apply to a breach of the above mentioned duties, and in the event of oppression of other shareholders, additional remedies are available to the injured shareholder.

 

In addition, any controlling shareholder, any shareholder that knows that its vote can determine the outcome of a shareholder vote and any shareholder that, under a company’s articles of association, has the power to appoint or prevent the appointment of an office holder, or has another power with respect to a company, is under a duty to act with fairness towards the company. The Companies Law does not describe the substance of this duty except to state that the remedies generally available upon a breach of contract will also apply in the event of a breach of the duty to act with fairness, taking the shareholder’s position in the company into account.

 

  52  

 

 

Committees of the Board of Directors

 

Our board of directors has established three standing committees, the audit committee, the compensation committee and the Financial Statement Examination Committee.

 

Audit Committee

 

Under the Companies Law, we are required to appoint an audit committee. Our audit committee, acting pursuant to a written charter, is comprised of Mr. Roni Kleinfeld, Ms. Irit Ben-Ami, and Mr. Eli Yoresh.

 

Our audit committee acts as a committee for review of our financial statements as required under the Companies Law, and in such capacity oversees and monitors our accounting; financial reporting processes and controls; audits of the financial statements; compliance with legal and regulatory requirements as they relate to financial statements or accounting matters; the independent registered public accounting firm’s qualifications, independence and performance; and provides the board of directors with reports on the foregoing.

 

Under the Companies Law, our audit committee is responsible for:

 

(i) determining whether there are deficiencies in the business management practices of our company, and making recommendations to the board of directors to improve such practices;
   
(iv) determining whether to approve certain related party transactions (including transactions in which an office holder has a personal interest and whether such transaction is extraordinary or material under Companies Law) (see “Item 7.B. Approval of Related Party Transactions under Israeli law”);
   
(vii) examining our internal controls and internal auditor’s performance, including whether the internal auditor has sufficient resources and tools to dispose of its responsibilities;
   
(viii) examining the scope of our auditor’s work and compensation and submitting a recommendation with respect thereto to our board of directors or shareholders, depending on which of them is considering the appointment of our auditor; and
   
(ix) establishing procedures for the handling of employees’ complaints as to the management of our business and the protection to be provided to such employees.

 

Our audit committee may not conduct any discussions or approve any actions requiring its approval (see “Item 7.B. Approval of Related Party Transactions under Israeli law”), unless at the time of the approval a majority of the committee’s members are present.

 

  53  

 

 

Nasdaq Stock Market Requirements for Audit Committee

 

Under the Nasdaq Stock Market rules, we are required to maintain an audit committee consisting of at least three members, all of whom are independent and are financially literate and one of whom has accounting or related financial management expertise.

 

As noted above, the members of our audit committee include Mr. Roni Kleinfeld, Ms. Irit Ben-Ami, and Mr. Eli Yoresh, each of whom is “independent,” as such term is defined in under Nasdaq Stock Market rules. Mr. Kleinfeld serves as the chairman of our audit committee. All members of our audit committee meet the requirements for financial literacy under the Nasdaq Stock Market rules. Our board of directors has determined that each member of our audit committee is an audit committee financial expert as defined by the SEC rules and has the requisite financial experience as defined by the Nasdaq Stock Market rules.

 

Financial Statement Examination Committee

 

Under the Companies Law, the board of directors of a public company in Israel must appoint a financial statement examination committee, which consists of members with accounting and financial expertise or the ability to read and understand financial statements. According to a resolution of our board of directors, the audit committee has been assigned the responsibilities and duties of a financial statements examination committee, as permitted under relevant regulations promulgated under the Companies Law. From time to time as necessary and required to approve our financial statements, the audit committee holds separate meetings, prior to the scheduled meetings of the entire board of directors regarding financial statement approval. The function of a financial statements examination committee is to discuss and provide recommendations to its board of directors (including the report of any deficiency found) with respect to the following issues: (1) estimations and assessments made in connection with the preparation of financial statements; (2) internal controls related to the financial statements; (3) completeness and propriety of the disclosure in the financial statements; (4) the accounting policies adopted and the accounting treatments implemented in material matters of the company; and (5) value evaluations, including the assumptions and assessments on which evaluations are based and the supporting data in the financial statements. Our independent registered public accounting firm and our internal auditor are invited to attend all meetings of the audit committee when it is acting in the role of the financial statements examination committee.

 

Compensation Committee

 

Under the Companies Law, the board of directors of any public company must establish a compensation committee. Under the Nasdaq rules, we are required to maintain a Compensation Committee consisting entirely of independent directors (or the determination of such compensation solely by the independent members of our board of directors).

 

Our compensation committee is acting pursuant to a written charter, and consists of Mr. Roni Kleinfeld, Ms. Irit Ben-Ami and Mr. Eli Yoresh, each of whom is “independent,” as such term is defined under Nasdaq rules. Our compensation committee complies with the provisions of the Companies Law, the regulations promulgated thereunder, and our amended and restated articles of association. Our compensation committee also complies with committee membership and charter requirements prescribed under the Nasdaq Stock Market rules.

 

Our compensation committee reviews and recommends to our board of directors: (1) the annual base compensation of our executive officers and directors; (2) annual incentive bonus, including the specific goals and amount; (3) equity compensation; (4) employment agreements, severance arrangements, and change in control agreements/provisions; (5) retirement grants and/or retirement bonuses; and (6) any other benefits, compensation, compensation policies or arrangements.

 

  54  

 

 

The duties of the compensation committee include the recommendation to the company’s board of directors of a policy regarding the terms of engagement of office holders, to which we refer as a compensation policy. That policy must be adopted by the company’s board of directors, after considering the recommendations of the compensation committee. The compensation policy is then brought for approval by our shareholders. On July 8, 2015, our shareholders approved our compensation policy.

 

The compensation policy must serve as the basis for decisions concerning the financial terms of employment or engagement of executive officers and directors, including exculpation, insurance, indemnification or any monetary payment or obligation of payment in respect of employment or engagement. The compensation policy must relate to certain factors, including advancement of the company’s objectives, the company’s business and its long-term strategy, and creation of appropriate incentives for executives. It must also consider, among other things, the company’s risk management, size and the nature of its operations. The compensation policy must furthermore consider the following additional factors:

 

  the knowledge, skills, expertise and accomplishments of the relevant director or executive;
     
  the director’s or executive’s roles and responsibilities and prior compensation agreements with him or her;
     
  the relationship between the terms offered and the average and median compensation of the other employees of the company, including those employed through manpower companies;
     
  the impact of disparities in salary upon work relationships in the company;
     
  the possibility of reducing variable compensation at the discretion of the board of directors; and the possibility of setting a limit on the exercise value of non-cash variable compensation; and
     
  as to severance compensation, the period of service of the director or executive, the terms of his or her compensation during such service period, the company’s performance during that period of service, the person’s contribution towards the company’s achievement of its goals and the maximization of its profits, and the circumstances under which the person is leaving the company.

 

The compensation policy must also include the following principles:

 

  the link between variable compensation and long-term performance and measurable criteria;
     
  the relationship between variable and fixed compensation, and the ceiling for the value of variable compensation;
     
  the conditions under which a director or executive would be required to repay compensation paid to him or her if it was later shown that the data upon which such compensation was based was inaccurate and was required to be restated in the company’s financial statements;
     
  the minimum holding or vesting period for variable, equity-based compensation; and
     
  maximum limits for severance compensation.

 

The compensation policy must also consider appropriate incentives from a long-term perspective and maximum limits for severance compensation.

 

  55  

 

 

The compensation committee is responsible for (1) recommending the compensation policy to a company’s board of directors for its approval (and subsequent approval by our shareholders) and (2) duties related to the compensation policy and to the compensation of a company’s office holders as well as functions previously fulfilled by a company’s audit committee with respect to matters related to approval of the terms of engagement of office holders, including:

 

  recommending whether a compensation policy should continue in effect, if the then-current policy has a term of greater than three years (approval of either a new compensation policy or the continuation of an existing compensation policy must in any case occur every three years);

 

  recommending to the board of directors periodic updates to the compensation policy;

 

  assessing implementation of the compensation policy; and

 

  determining whether the compensation terms of the chief executive officer of the company need not be brought to approval of the shareholders.

 

Nasdaq Stock Market Requirements for Compensation Committee

 

Under Nasdaq rules, we are required to maintain a compensation committee consisting of at least two members, all of whom are independent. In addition, in affirmatively determining the independence of any director who will serve on the compensation committee of a board of directors, the board of directors must consider all factors specifically relevant to determining whether a director has a relationship to the company which is material to that director’s ability to be independent from management in connection with the duties of a compensation committee member.

 

As noted above, the members of our compensation committee include Mr. Roni Kleinfeld, Ms. Irit Ben-Ami and Mr. Eli Yoresh, each of whom is “independent,” as such term is defined under Nasdaq rules. Mr. Roni Kleinfeld serves as the chairman of our compensation committee.

 

Internal Auditor

 

Under the Companies Law, the board of directors must also appoint an internal auditor nominated by the audit committee. Our internal auditor is Daniel Spira. The role of the internal auditor is to examine whether a company’s actions comply with the law and proper business procedure. The internal auditor may not be an interested party or office holder, or a relative of any interested party or office holder, and may not be a member of the company’s independent accounting firm or its representative. The Companies Law defines an interested party as a holder of 5% or more of the shares or voting rights of a company, any person or entity that has the right to nominate or appoint at least one director or the general manager of the company or any person who serves as a director or as the general manager of a company. Our internal auditor is not our employee, but the managing partner of a firm which specializes in internal auditing.

 

Remuneration of Directors

 

Under the Companies Law, remuneration of directors is subject to the approval of the compensation committee (until recently of the audit committee), thereafter by the board of directors and thereafter by the general meeting of the shareholders. In case the remuneration of the directors is in accordance with regulation applicable to remuneration of the external directors then such remuneration shall be exempt from the approval of the general meeting.

 

Insurance

 

Under the Companies Law, a company may obtain insurance for any of its office holders for:

 

  a breach of his or her duty of care to the company or to another person;
     
  a breach of his or her duty of loyalty to the company, provided that the office holder acted in good faith and had reasonable cause to assume that his or her act would not prejudice the company’s interests; and
     
  a financial liability imposed upon him or her in favor of another person concerning an act performed by such office holder in his or her capacity as an officer holder.

 

We currently have directors’ and officers’ liability insurance, providing total coverage of $15,000,000 for the benefit of all of our directors and officers, in respect of which we paid a twelve-month premium of approximately $75,000, which expires on October 3, 2018.

 

  56  

 

 

On November 3, and November 7, 2016, respectively, our compensation committee and board of directors approved our purchase of a professional liability insurance policy for our current and future directors and officers, who may be appointed from time to time. As required by the Companies Law, this matter was submitted to a vote, and approved by our shareholders on December 26, 2016. The approved terms allow us to obtain insurance with an annual premium that may not exceed a total of $100,000, and maximum coverage up to $30 million.

 

Indemnification

 

The Companies Law provides that a company may indemnify an office holder against:

 

  a financial liability imposed on him or her in favor of another person by any judgment concerning an act performed in his or her capacity as an office holder;

 

  reasonable litigation expenses, including attorneys’ fees, expended by the office holder as a result of an investigation or proceeding instituted against him or her by an authority authorized to conduct such investigation or proceeding, provided that (1) no indictment (as defined in the Companies Law) was filed against such office holder as a result of such investigation or proceeding; and (2) no financial liability as a substitute for the criminal proceeding (as defined in the Companies Law) was imposed upon him or her as a result of such investigation or proceeding, or, if such financial liability was imposed, it was imposed with respect to an offense that does not require proof of criminal intent; and

 

  reasonable litigation expenses, including attorneys’ fees, expended by the office holder or charged to him or her by a court relating to an act performed in his or her capacity as an office holder, in connection with: (1) proceedings that the company institutes, or that another person institutes on the company’s behalf, against him or her; (2) a criminal charge of which he or she was acquitted; or (3) a criminal charge for which he or she was convicted for a criminal offense that does not require proof of criminal thought.

 

Our amended and restated articles of association allow us to indemnify our office holders up to a certain amount. The Companies Law also permits a company to undertake in advance to indemnify an office holder, provided that if such indemnification relates to financial liability imposed on him or her, as described above, then the undertaking should be limited:

 

  to categories of events that the board of directors determines are likely to occur in light of the operations of the company at the time that the undertaking to indemnify is made; and
     
  in amount or criterion determined by the board of directors, at the time of the giving of such undertaking to indemnify, to be reasonable under the circumstances.

 

We have entered into indemnification agreements with all of our directors and with certain members of our senior management. Each such indemnification agreement provides the office holder with indemnification permitted under applicable law and up to a certain amount, and to the extent that these liabilities are not covered by directors and officers insurance.

 

Exculpation

 

Under the Companies Law, an Israeli company may not exculpate an office holder from liability for a breach of his or her duty of loyalty, but may exculpate in advance an office holder from his or her liability to the company, in whole or in part, for a breach of his or her duty of care (other than in relation to distributions). Our amended and restated articles of association provide that we may exculpate any office holder from liability to us to the fullest extent permitted by law. Under the indemnification agreements, we exculpate and release our office holders from any and all liability to us related to any breach by them of their duty of care to us to the fullest extent permitted by law.

 

  57  

 

 

Limitations

 

The Companies Law provides that we may not exculpate or indemnify an office holder nor enter into an insurance contract that would provide coverage for any liability incurred as a result of any of the following: (1) a breach by the office holder of his or her duty of loyalty unless (in the case of indemnity or insurance only, but not exculpation) the office holder acted in good faith and had a reasonable basis to believe that the act would not prejudice us; (2) a breach by the office holder of his or her duty of care if the breach was carried out intentionally or recklessly (as opposed to merely negligently); (3) any action taken with the intent to derive an illegal personal benefit; or (4) any fine levied against the office holder.

 

The foregoing descriptions summarize the material aspects and practices of our board of directors. For additional details, we also refer you to the full text of the Companies Law, as well as of our amended and restated articles of association, which are exhibits to this annual report on Form 20-F and are incorporated herein by reference.

 

There are no service contracts between us or our subsidiaries, on the one hand, and our directors in their capacity as directors, on the other hand, providing for benefits upon termination of service.

 

D. Employees.

 

As of December 31, 2017, we have three senior management, full-time employees, two of whom also serve as directors in our Company. In addition, we have 89 full-time employees and 2 part-time employees. One employee is located in the United States and the rest are located in Israel.

 

E. Share Ownership.

 

The following table lists as of March 14, 2018, the number of our shares beneficially owned by each of our directors, our executive officers and our directors and executive officers as a group:

 

   

Number of

Ordinary

Shares

Beneficially

Owned (1)

    Percent of Class (2)  
Executive Officers and Directors            
             
Itschak Shrem     2,404,545 (3)     2.5 %
                 
Avi Reichental     435,417 (10)     *  
                 
Amit Dror     2,622,421 (4)     2.7 %
                 
Simon Anthony-Fried     2,575,334 (5)     2.7 %
                 
Yael Sandler     140,833 (6)     *  
                 
Additional Directors                
                 
Irit Ben-Ami     100,000 (7)     *  
                 
Ofir Baharav     187,500 (8)     *  
                 
Roni Kleinfeld     100,000 (7)     *  
                 
Abraham Nahmias     110,000 (9)     *  
                 
Eli Yoresh     380,797 (11)     *  
                 
All directors and executive officers as a group (10 persons)     9,056,847       9.2 %

 

* Less than 1%.

 

  58  

 

 

(1) Beneficial ownership is determined in accordance with the rules of the SEC and generally includes voting or investment power with respect to securities. Ordinary Shares relating to options currently exercisable or exercisable within 60 days of the date of this table are deemed outstanding for computing the percentage of the person holding such securities but are not deemed outstanding for computing the percentage of any other person. Except as indicated by footnote, and subject to community property laws where applicable, the persons named in the table above have sole voting and investment power with respect to all shares shown as beneficially owned by them.
(2) The percentages shown are based on 96,541,207 Ordinary Shares issued and outstanding as of March 14, 2018 plus Ordinary Shares relating to options currently exercisable or exercisable within 60 days of the date of this table, which are deemed outstanding for computing the percentage of the person holding such securities but are not deemed outstanding for computing the percentage of any other person.
(3) Includes warrants currently exercisable to purchase 107,143 Ordinary Shares at an exercise price of NIS 2.25 per share. In addition, options to purchase 389,584 Ordinary Shares at an exercise price of NIS 5.50 per share.
(4) Includes options to purchase 389,584 Ordinary Shares at an exercise price of NIS 5.50 per share.
(5) Includes options to purchase 387,500 Ordinary Shares at an exercise price of NIS 5.50 per share.
(6) Includes options to purchase 120,000 Ordinary Shares at an exercise price of NIS 1.65 per share and options to purchase 20,833 Ordinary Shares at an exercise price of NIS 5.50 per share.
(7) Includes options to purchase 100,000 Ordinary Shares at an exercise price of NIS 5.50 per share.
(8) Includes options to purchase 187,500 Ordinary Shares at an exercise price of NIS 6.75 per share.
(9) Includes options to purchase 110,000 Ordinary Shares at an exercise price of NIS 5.50 per share.
(10) Includes options to purchase 83,333 Ordinary Shares at an exercise price of NIS 6.50 per share and options to purchase 2,083 Ordinary Shares at an exercise price of NIS 5.50 per share.
(11) Includes warrants to purchase 35,715 Ordinary Shares at an exercise price of NIS 2.25 per share. In addition, includes options to purchase 110,000 Ordinary Shares at an exercise price of NIS 5.50 per share.

 

Stock Option Plans

 

2015 Stock Option Plan

 

We maintain one equity incentive plan – our 2015 Stock Option Plan, or the 2015 Plan. As of March 14, 2018, the number of Ordinary Shares reserved for the exercise of options granted under the plan was 433,744. In addition, options to purchase 7,566,256 Ordinary Shares were issued and outstanding. Of such outstanding options, options to purchase 4,346,564 Ordinary Shares were vested as of that date, 1,886,978 with an exercise price of NIS 1.65 (approximately $0.48) per share, 1,924,169 with an exercise price of NIS 5.50 (approximately $1.59) per share, 68,750 with an exercise price of NIS 6.50 (approximately $1.87) per share, 166,667 with an exercise price of NIS 6.75 (approximately $1.95) per share , 200,000 with an exercise price of NIS 7.50 (approximately $2.16) per share, and 100,000 with an exercise price of NIS 9.00 (approximately $2.60) per share.

 

  59  

 

 

Our 2015 Plan was adopted by our board of directors in February 2015, and expires on February 2025. Our employees, directors, officer, consultants, advisors, suppliers and any other person or entity whose services are considered valuable to us are eligible to participate in this plan.

 

Our 2015 Plan is administered by our board of directors, regarding the granting of options and the terms of option grants, including exercise price, method of payment, vesting schedule, acceleration of vesting and the other matters necessary in the administration of these plan. Eligible Israeli employees, officers and directors, would qualify for provisions of Section 102(b)(2) of the Israeli Income Tax Ordinance, or the Tax Ordinance. Pursuant to such Section 102(b)(2), qualifying options and shares issued upon exercise of such options are held in trust and registered in the name of a trustee selected by the board of directors. The trustee may not release these options or shares to the holders thereof for two years from the date of the registration of the options in the name of the trustee. Under Section 102, any tax payable by an employee from the grant or exercise of the options is deferred until the transfer of the options or ordinary shares by the trustee to the employee or upon the sale of the options or ordinary shares, and gains may qualify to be taxed as capital gains at a rate equal to 25%, subject to compliance with specified conditions. Our Israeli non-employee service providers and controlling shareholders may only be granted options under Section 3(9) of the Tax Ordinance, which does not provide for similar tax benefits. The 2015 Plan also permits the grant to Israeli grantees of options that do not qualify under Section 102(b)(2).

 

Upon termination of employment for any other reason, other than in the event of death, disability, all unvested options will expire and all vested options will generally be exercisable for 6 months following termination, or such other period as determined by the plan administrator, subject to the terms of the 2015 Plan and the governing option agreement.

 

Upon termination of employment due to death or disability, all the vested options at the time of termination will be exercisable for 12 months, or such other period as determined by the plan administrator, subject to the terms of the 2015 Plan and the governing option agreement.

 

On February 13, 2018, our board of directors adopted an appendix to the 2015 Plan for U.S. residents. Under this appendix, the 2015 Plan provides for the granting of options to U.S. residents in compliance with the U.S. Internal Revenue Code of 1986, as amended. At our next shareholders meeting, we intend to bring the 2015 Plan together with the appendix to the vote of our shareholders.

 

ITEM 7. MAJOR SHAREHOLDERS AND RELATED PARTY TRANSACTIONS

 

A. Major Shareholders

 

The following table presents as of March 14, 2018 (unless otherwise noted below), the beneficial ownership of our Ordinary Shares by each person who is known by us to be the beneficial owner of 5% or more of our outstanding Ordinary Shares (to whom we refer as our Major Shareholders). The data presented is based on information provided to us by the Major Shareholders or disclosed in public regulatory filings.

 

  60  

 

 

Except where otherwise indicated, and except pursuant to community property laws, we believe, based on information furnished by such owners, that the beneficial owners of the shares listed below have sole investment and voting power with respect to, and the sole right to receive the economic benefit of ownership of, such shares. The shareholders listed below do not have any different voting rights from any of our other shareholders. We know of no arrangements that would, at a subsequent date, result in a change of control of our Company.

 

Name  

Number of

Ordinary Shares Beneficially Owned(1)

    Percent of Class(2)  
             
Hapheonix Group     5,371,934      

5.6

%
                 

(1) Beneficial ownership is determined in accordance with the rules of the SEC and generally includes voting or investment power with respect to securities. Ordinary Shares relating to options currently exercisable or exercisable within 60 days of the date of this table are deemed outstanding for computing the percentage of the person holding such securities but are not deemed outstanding for computing the percentage of any other person.
(2) The percentages shown are based on 96,541,207 Ordinary Shares issued and outstanding as of March 14, 2018.

 

Changes in Percentage Ownership by Major Shareholders

 

On August 25, 2014, we entered into the Merger with the Subsidiary, whereby we acquired 100% of the share capital of the Subsidiary. As a result of the Merger, the four shareholders of the Subsidiary received an aggregate amount of approximately 37.4% our issued and outstanding Ordinary Shares, as of the date thereof.

 

For a detailed description of the Merger, see “Item 7.B. Related Party Transactions – Merger Agreement and Private Placement Agreements.”

 

Record Holders

 

Based upon a review of the information provided to us by our transfer agent and custodian bank in the United States, as of March 14, 2018, there were a total of 4 holders of record of our shares, of which 1 record holder holding 4 shares, or approximately 0.000004% of our outstanding shares had a registered address in the United States, and the remaining 3 holders had registered addresses in Israel. These numbers are not representative of the number of beneficial holders of our shares nor is it representative of where such beneficial holders reside, since many of these shares were held of record by brokers or other nominees.

 

The Company is not controlled by another corporation, by any foreign government or by any natural or legal persons except as set forth herein, and here are no arrangements known to the Company which would result in a change in control of the Company at a subsequent date. See “Item 7.B. Related Party Transactions – Shareholders Agreement” for information regarding a voting agreement among certain of our shareholders.

 

B. Related Party Transactions

 

Employment Agreements

 

We have entered into written employment agreements with each of our executive officers. All of these agreements contain customary provisions regarding noncompetition, confidentiality of information and assignment of inventions. However, the enforceability of the noncompetition provisions may be limited under applicable law. In addition, we have entered into agreements with each executive officer and director pursuant to which we have agreed to indemnify each of them up to a certain amount and to the extent that these liabilities are not covered by directors and officers insurance.

 

  61  

 

 

Options

 

Since our inception we have granted options to purchase our Ordinary Shares to our officers and certain of our directors. Such option agreements may contain acceleration provisions upon certain merger, acquisition, or change of control transactions. We describe our option plans under “Share Ownership—Stock Option Plans.” If the relationship between us and an executive officer or a director is terminated, except for cause (as defined in the various option plan agreements), options that are vested will generally remain exercisable for 90 days after such termination.

 

Private Placement of Ordinary Shares

 

On January 13, 2015, we issued an aggregate of 1,508,572 Ordinary Shares pursuant to a private placement, at a price per share of NIS 1.40 (approximately $0.35). In addition, we issued warrants to purchase up to 1,508,572 Ordinary Shares, 50% of which at an exercise price of NIS 1.75 (approximately $0.44) per share, and 50% of which at an exercise price of NIS 2.25 (approximately $0.57) per share. These warrants will expire as follows: (i) warrants to purchase 754,286 of our Ordinary Shares will expire 18 months from the date of issuance, and (ii) warrants to purchase 754,286 of our Ordinary Shares will expire 36 months from the date of issuance.

 

As an extension to this private placement, on April 15, 2015, we issued an aggregate of 285,715 Ordinary Shares to Eli Yoresh, one of the Company’s directors, and Itschak Shrem, the Company’s Chairman, at a price per share of NIS 1.40 (approximately $0.35). In addition, we issued warrants to purchase up to 285,715 Ordinary Shares, 50% of which at an exercise price of NIS 1.75 (approximately $0.44) per share, and 50% of which at an exercise price of NIS 2.25 (approximately $0.57) per share. These warrants will expire as follows: (i) warrants to purchase 142,858 of our Ordinary Shares will expire 18 months from the date of issuance, and (ii) warrants to purchase 142,857 of our Ordinary Shares will expire 36 months from the date of issuance.

 

  62  

 

 

Public Offering of Securities

 

In September 2016, we entered into an underwriting agreement with National Securities Corporation, as representative of the underwriters named therein, for a firm commitment public offering of ADSs. The price to the public was $6.50 per ADS and aggregate gross proceeds of the offering were approximately $13.8 million. Itschak Shrem, the Chairman of our board of directors purchased approximately $200,000 of ADSs in the offering from the underwriters at the public offering price. The underwriters received the same underwriting discounts and commissions on the ADSs purchased by Mr. Shrem as they did on the other ADSs sold in the offering.

 

In February 2018, we entered into an underwriting agreement with National Securities Corporation, as representative of the underwriters named therein, for a firm commitment public offering of ADSs. The price to the public was $2.00 per ADS and aggregate gross proceeds of the offering were approximately $13.8 million. Itschak Shrem and Avi Reichental, the Co-Chairmen of our board of directors purchased an aggregated amount of approximately $280,000 of ADSs in the offering from the underwriters at the public offering price. The underwriters received the same underwriting discounts and commissions on the ADSs purchased by Mr. Shrem and Mr. Reichental as they did on the other ADSs sold in the offering.

 

Professional Services Agreement

 

In December 2017, Nano USA entered into a professional services agreement with XponentialWorks Inc., or XponentialWorks, a company controlled by our Co-Chairman, Mr. Avi Reichental. Pursuant to the agreement, XponentialWorks will provide Nano USA with a showroom in Venture, CA to be used for reseller recruiting and training activities as well as a key customer acquisition demo room and benchmark production center, and relevant maintenance services. In addition, XponentialWorks will provide additional services as follows: (i) part time services of a senior manager and an application engineer; (ii) integrate Nano USA into its curated marketing events; and (iii) services of senior material scientist and associated tools and facilities for case studies, publication and digital marketing services. In consideration of such services we pay XponentialWorks a monthly fee of $8,000.

 

Open Innovation Services Agreement

 

In December 2017, Nano USA entered into an open innovation services agreement with XponentialWorks, including on behalf of Techniplas Digital and Techniplas Inc. Pursuant to the agreement, XponentialWorks will provide Nano USA with the following: (i) full membership in the Techniplas additive manufacturing innovation center; (ii) include Nano USA in XponentialWorks’ and Techniplas’ websites as a partner; (iii) prepare at least six automotive centric case studies for our marketing and sales use and publication on an annual basis; (iv) provide Nano USA with end-user customer testimonials; and (iii) produce videos that convey XponentialWorks’ strong endorsement of Nano USA’s brand and capabilities. In consideration of such services, we will grant XponentialWorks access to one DragonFly 2020 Pro 3D printer with associated materials for the entire term of the agreement.

 

C. Interests of Experts and Counsel

 

Not applicable.

 

ITEM 8. FINANCIAL INFORMATION.

 

A. Consolidated Statements and Other Financial Information.

 

See “Item 18. Financial Statements.”

 

Legal Proceedings

 

From time to time, we are involved in various routine legal proceedings incidental to the ordinary course of our business. We do not believe that the outcomes of these legal proceedings have had in the recent past, or will have (with respect to any pending proceedings), significant effects on our financial position or profitability.

 

  63  

 

 

Dividends

 

We have never declared or paid any cash dividends on our Ordinary Shares and do not anticipate paying any cash dividends in the foreseeable future. Payment of cash dividends, if any, in the future will be at the discretion of our board of directors and will depend on then-existing conditions, including our financial condition, operating results, contractual restrictions, capital requirements, business prospects and other factors our board of directors may deem relevant.

 

Payment of dividends may be subject to Israeli withholding taxes. See “Item 10.E. Taxation”, for additional information.

 

B. Significant Changes

 

No significant change, other than as otherwise described in this annual report on Form 20-F, has occurred in our operations since the date of our consolidated financial statements included in this annual report on Form 20-F.

 

ITEM 9. THE OFFER AND LISTING

 

A. Offer and Listing Details

 

Our Ordinary Shares have been trading on the TASE under the symbol “NNDM” since 1977. Our ADSs commenced trading on the OTCQB and OTCQX under the symbol “NNDMY” on July 29, 2015, and September 17, 2015, respectively. On March 7, 2016, our ADSs, each of which represents five of our Ordinary Shares, commenced trading on the Nasdaq Capital Market under the symbol “NNDM.”

 

The following table sets forth, for the periods indicated, the reported high and low closing sale prices of our Ordinary Shares on the TASE in NIS and U.S. dollars. U.S. dollar per Ordinary Share amounts are calculated using the U.S. dollar representative rate of exchange on the date to which the high or low market price is applicable, as reported by the Bank of Israel.

 

    NIS           U.S.$        
    Price Per           Price Per        
    Ordinary           Ordinary        
    Share           Share        
    High     Low     High     Low  
                         
Annual:                        
2017     5.33       2.07       1.47       0.59  
2016     6.52       4.47       1.70       1.16  
2015     7.99       1.51       2.07       0.39  
2014     5.05       0.81       1.45       0.23  
2013     1.26       0.81       0.34       0.23  
2012     1.36       0.88       0.35       0.23  
                                 
Quarterly:                                
First Quarter 2018 (through March 14, 2018)     2.60       1.48       0.76       0.43  
Fourth Quarter 2017     4.05       2.07       1.16       0.59  
Third Quarter 2017     4.42       3.02       1.26       0.84  
Second Quarter 2017     5.06       4.24       1.38       1.21  
First Quarter 2017     5.33       4.25       1.47       1.12  
Fourth Quarter 2016     5.64       4.47       1.49       1.16  
Third Quarter 2016     6.39       5.08       1.69       1.31  
Second Quarter 2016     6.24       4.98       1.64       1.29  
First Quarter 2016     6.52       4.49       1.70       1.16  
                                 
Most Recent Six Months:                                
February 2018     2.24       1.58       0.65       0.45  
January 2018     2.60       2.16       0.76       0.63  
December 2017     2.64       2.07       0.76       0.59  
November 2017     3.23       2.75       0.91       0.78  
October 2017     4.05       3.29       1.16       0.93  
September 2017     3.69       3.43       1.05       0.98  

 

  64  

 

 

The following table sets forth, for the periods indicated, the reported high and low closing sale prices of our ADSs on the Nasdaq Capital Market, OTCQX and OTCQB, as applicable, in U.S. dollars.

  

    U.S.$        
    Price Per        
    ADS        
    High     Low  
Annual:            
2017     7.19       2.95  
2016     8.89       5.77  
Quarterly:                
First Quarter 2018 (through March 14, 2018)     3.73      

2.11

 
Fourth Quarter 2017     5.72       2.95  
Third Quarter 2017     6.23       4.22  
Second Quarter 2017     6.92       6.00  
First Quarter 2017     7.19       5.64  
Fourth Quarter 2016     7.43       5.89  
Third Quarter 2016     8.61       6.69  
Most Recent Six Months:                
February 2018     3.29       2.13  
January 2018     3.73       3.20  
December 2017     3.94       2.95  
November 2017     4.66       3.90  
October 2017     5.72       4.61  
September 2017     5.23       4.90  

  

B. Plan of Distribution

 

Not applicable.

 

C. Markets

 

Our Ordinary Shares are listed on the TASE. Our ADSs are listed on the Nasdaq Capital Market.

 

D. Selling Shareholders

 

Not applicable.

 

E. Dilution

 

Not applicable.

 

F. Expenses of the Issue

 

Not applicable.

 

  65  

 

 

ITEM 10. ADDITIONAL INFORMATION

 

A. Share Capital

 

Not applicable.

 

B. Memorandum and Articles of Association

 

Our registration number with the Israeli Registrar of Companies is 52-002910-9.

 

Purposes and Objects of the Company

 

Our purpose is set forth in Section 8 of our amended and restated articles of association and includes every lawful purpose.

 

The Powers of the Directors

 

Our board of directors shall direct our policy and shall supervise the performance of our chief executive officer and his actions. Our board of directors may exercise all powers that are not required under the Companies Law or under our amended and restated articles of association to be exercised or taken by our shareholders .

 

Rights Attached to Shares

 

Our Ordinary Shares shall confer upon the holders thereof:

 

  equal right to attend and to vote at all of our general meetings, whether regular or special, with each Ordinary Share entitling the holder thereof, which attend the meeting and participate at the voting, either in person or by a proxy or by a written ballot, to one vote;

 

  equal right to participate in distribution of dividends, if any, whether payable in cash or in bonus shares, in distribution of assets or in any other distribution, on a per share pro rata basis; and

 

  equal right to participate, upon our dissolution, in the distribution of our assets legally available for distribution, on a per share pro rata basis.

 

Election of Directors

 

Pursuant to our amended and restated articles of association, our directors are elected at an annual general meeting and/or a special meeting of our shareholders and serve on the board of directors until the next annual general meeting or until they resign or until they cease to act as board members pursuant to the provisions of our amended and restated articles of association or any applicable law, upon the earlier. In addition, our amended and restated articles of association allow our board of directors to appoint directors to fill vacancies and/or as an addition to the board of directors (subject to the maximum number of directors) to serve until the next annual general meeting or earlier if required by our amended and restated articles of association or applicable law, upon the earlier.

 

Annual and Special Meetings

 

Under the Israeli law, we are required to hold an annual general meeting of our shareholders once every calendar year, at such time and place which shall be determined by our board of directors, which must be no later than 15 months after the date of the previous annual general meeting. All meetings other than the annual general meeting of shareholders are referred to as special general meetings. Our board of directors may call special meetings whenever it sees fit and upon the written request of: (a) any two of our directors or such number of directors equal to one quarter of the directors present at such a meeting; and/or (b) one or more shareholders holding, in the aggregate, 5% of our outstanding voting power.

 

  66  

 

 

Resolutions regarding the following matters must be passed at a general meeting of our shareholders:

 

  amendments to our amended and restated articles of association;

 

  the exercise of our board of director’s powers if our board of directors is unable to exercise its powers;

 

  appointment or termination of our auditors;

 

  appointment of directors;

 

  approval of acts and transactions requiring general meeting approval pursuant to the provisions of the Companies Law and any other applicable law;

 

  increases or reductions of our authorized share capital; and

 

  a merger (as such term is defined in the Companies Law).

 

Notices

 

The Companies Law requires that a notice of any annual or special shareholders meeting be provided at least 21 days prior to the meeting, and if the agenda of the meeting includes the appointment or removal of directors, the approval of transactions with office holders or interested or related parties, or an approval of a merger, notice must be provided at least 35 days prior to the meeting.

 

Quorum

 

As permitted under the Companies Law, the quorum required for our general meetings consists of at least two shareholders present in person, by proxy or written ballot, who hold or represent between them at least 25% of the total outstanding voting rights (instead of 33 1/3% of the issued share capital required under the Nasdaq Stock Market Rules). If within half an hour of the time appointed for the general meeting a quorum is not present, the general meeting shall stand adjourned the same day of the following week, at the same hour and in the same place, or to such other date, time and place as prescribed in the notice to the shareholders and in such adjourned meeting, if no quorum is present within half an hour of the time arranged, any number of shareholders participating in the meeting, shall constitute a quorum.

 

If a general meeting was summoned following the request of a shareholder, then a quorum required in an adjourned general meeting, shall consist of at least one or more shareholders, which holds and represents at least 5% of the company’s issued and outstanding share capital and at least 1% of the company voting rights, or one or more shareholder, which holds at least 5% of the Company’s voting rights.

 

Adoption of Resolutions

 

Our amended and restated articles of association provide that all resolutions of our shareholders require a simple majority vote, unless otherwise required under the Companies Law or our amended and restated articles of association. A shareholder may vote in a general meeting in person, by proxy or by a written ballot.

 

Changing Rights Attached to Shares

 

Unless otherwise provided by the terms of the shares and subject to any applicable law, in order to change the rights attached to any class of shares, such change must be adopted by the board of directors and at a general meeting of the affected class or by a written consent of all the shareholders of the affected class.

 

  67  

 

 

The enlargement of an existing class of shares or the issuance of additional shares thereof, shall not be deemed to modify the rights attached to the previously issued shares of such class or of any other class, unless otherwise provided by the terms of the shares.

 

Limitations on the Right to Own Securities in Our Company

 

There are no limitations on the right to own our securities.

 

Provisions Restricting Change in Control of Our Company

 

There are no specific provisions of our amended and restated articles of association that would have an effect of delaying, deferring or preventing a change in control of the Company or that would operate only with respect to a merger, acquisition or corporate restructuring involving us (or our Subsidiaries). However, as described below, certain provisions of the Companies Law may have such effect.

 

The Companies Law includes provisions that allow a merger transaction and requires that each company that is a party to the merger have the transaction approved by its board of directors and a vote of the majority of its shares. For purposes of the shareholder vote of each party, unless a court rules otherwise, the merger will not be deemed approved if shares representing a majority of the voting power present at the shareholders meeting and which are not held by the other party to the merger (or by any person who holds 25% or more of the voting power or the right to appoint 25% or more of the directors of the other party) vote against the merger. Upon the request of a creditor of either party to the proposed merger, the court may delay or prevent the merger if it concludes that there exists a reasonable concern that as a result of the merger the surviving company will be unable to satisfy the obligations of any of the parties to the merger. In addition, a merger may not be completed unless at least (1) 50 days have passed from the time that the requisite proposals for approval of the merger were filed with the Israeli Registrar of Companies by each merging company and (2) 30 days have passed since the merger was approved by the shareholders of each merging company.

 

The Companies Law also provides that an acquisition of shares in a public company must be made by means of a “special” tender offer if as a result of the acquisition (1) the purchaser would become a 25% or greater shareholder of the company, unless there is already another 25% or greater shareholder of the company or (2) the purchaser would become a 45% or greater shareholder of the company, unless there is already a 45% or greater shareholder of the company. These requirements do not apply if, in general, the acquisition (1) was made in a private placement that received shareholder approval, (2) was from a 25% or greater shareholder of the company which resulted in the acquirer becoming a 25% or greater shareholder of the company, or (3) was from a 45% or greater shareholder of the company which resulted in the acquirer becoming a 45% or greater shareholder of the company. A “special” tender offer must be extended to all shareholders, but the offeror is not required to purchase more than 5% of the company’s outstanding shares, regardless of how many shares are tendered by shareholders. In general, the tender offer may be consummated only if (1) at least 5% of the company’s outstanding shares will be acquired by the offeror and (2) the number of shares tendered in the offer exceeds the number of shares whose holders objected to the offer.

 

If, as a result of an acquisition of shares, the acquirer will hold more than 90% of a company’s outstanding shares, the acquisition must be made by means of a tender offer for all of the outstanding shares. In general, if less than 5% of the outstanding shares are not tendered in the tender offer and more than half of the offerees who have no personal interest in the offer tendered their shares, all the shares that the acquirer offered to purchase will be transferred to it. Shareholders may request appraisal rights in connection with a full tender offer for a period of six months following the consummation of the tender offer, but the acquirer is entitled to stipulate that tendering shareholders will forfeit such appraisal rights.

 

Lastly, Israeli tax law treats some acquisitions, such as stock-for-stock exchanges between an Israeli company and a foreign company, less favorably than U.S. tax laws. For example, Israeli tax law may, under certain circumstances, subject a shareholder who exchanges his Ordinary Shares for shares in another corporation to taxation prior to the sale of the shares received in such stock-for-stock swap.

 

  68  

 

 

Changes in Our Capital

 

The general meeting may, by a simple majority vote of the shareholders attending the general meeting:

 

  increase our registered share capital by the creation of new shares from the existing class or a new class, as determined by the general meeting;

 

  cancel any registered share capital which have not been taken or agreed to be taken by any person;

 

  consolidate and divide all or any of our share capital into shares of larger nominal value than our existing shares;

 

  subdivide our existing shares or any of them, our share capital or any of it, into shares of smaller nominal value than is fixed;

 

  reduce our share capital and any fund reserved for capital redemption in any manner, and with and subject to any incident authorized, and consent required, by the Companies Law; and

 

  reduce shares from our issued and outstanding share capital, in such manner that those shares shall be cancelled and the nominal par value paid for those shares will be registered on our books as capital fund, which shall be deemed as a premium paid on those shares which shall remain in our issued and outstanding share capital.

 

C. Material Contracts

 

Except as set forth below, we have not entered into any material contract within the two years prior to the date of this annual report on Form 20-F, other than contracts entered into in the ordinary course of business, or as otherwise described herein in “Item 4.A. History and Development of the Company” above, “Item 4.B. Business Overview” above, or “Item 7.A. Major Shareholders” above.

 

D. Exchange Controls

 

There are currently no Israeli currency control restrictions on payments of dividends or other distributions with respect to our Ordinary Shares or the proceeds from the sale of the shares, except for the obligation of Israeli residents to file reports with the Bank of Israel regarding certain transactions. However, legislation remains in effect pursuant to which currency controls can be imposed by administrative action at any time.

 

The ownership or voting of our Ordinary Shares by non-residents of Israel, except with respect to citizens of countries that are in a state of war with Israel, is not restricted in any way by our memorandum of association or amended and restated articles of association or by the laws of the State of Israel.

 

  69  

 

 

E. Taxation.

 

Israeli Tax Considerations and Government Programs

 

The following is a description of the material Israeli income tax consequences of the ownership of our Ordinary Shares. The following also contains a description of material relevant provisions of the current Israeli income tax structure applicable to companies in Israel, with reference to its effect on us. To the extent that the discussion is based on new tax legislation which has not been subject to judicial or administrative interpretation, there can be no assurance that the tax authorities will accept the views expressed in the discussion in question. The discussion is not intended, and should not be taken, as legal or professional tax advice and is not exhaustive of all possible tax considerations.

 

The following description is not intended to constitute a complete analysis of all tax consequences relating to the ownership or disposition of our Ordinary Shares and ADSs. Shareholders should consult their own tax advisors concerning the tax consequences of their particular situation, as well as any tax consequences that may arise under the laws of any state, local, foreign or other taxing jurisdiction.

 

General Corporate Tax Structure in Israel

 

Israeli companies are generally subject to corporate tax. As of January 2016, the corporate tax rate was 25%. As of January 1, 2017, the corporate tax rate was reduced to 24% and as of January 1, 2018, the corporate tax rate will be further reduced to 23%. However, the effective tax rate payable by a company that derives income from a Preferred Enterprise (as discussed below) may be considerably less. Capital gains derived by an Israeli company are generally subject to the prevailing corporate tax rate.

 

Law for the Encouragement of Industry (Taxes), 5729-1969

 

The Law for the Encouragement of Industry (Taxes), 5729-1969, generally referred to as the Industry Encouragement Law, provides several tax benefits for “Industrial Companies.”

 

The Industry Encouragement Law defines an “Industrial Company” as an Israeli resident-company, of which 90% or more of its income in any tax year, other than income from defense loans, is derived from an “Industrial Enterprise” owned by it. An “Industrial Enterprise” is defined as an enterprise whose principal activity in a given tax year is industrial production.

 

The following corporate tax benefits, among others, are available to Industrial Companies:

 

  amortization of the cost of purchased a patent, rights to use a patent, and know-how, which are used for the development or advancement of the company, over an eight-year period, commencing on the year in which such rights were first exercised;

 

  under limited conditions, an election to file consolidated tax returns with related Israeli Industrial Companies; and

 

  expenses related to a public offering are deductible in equal amounts over three years.

 

Eligibility for benefits under the Industry Encouragement Law is not contingent upon approval of any governmental authority.

 

Tax Benefits and Grants for Research and Development

 

Under the Israeli research and development Law, or R&D Law, programs which meet specified criteria and are approved by the IIA are eligible for grants of up to 50% of the project’s expenditure, as determined by the research committee, in exchange for the payment of royalties from the revenues generated from the sale of products and related services developed, in whole or in part pursuant to, or as a result of, a research and development program funded by the IIA. The royalties are generally at a range of 3.0% to 5.0% of revenues until the entire IIA grant is repaid, together with an annual interest generally equal to the 12 month LIBOR applicable to dollar deposits that is published on the first business day of each calendar year.

 

  70  

 

 

The terms of the R&D Law also require that the manufacture of products developed with government grants be performed in Israel. The transfer of manufacturing activity outside Israel may be subject to the prior approval of the IIA. Under the regulations of the R&D Law, assuming we receive approval from the IIA to manufacture our IIA funded products outside Israel, we may be required to pay increased royalties. The increase in royalties depends upon the manufacturing volume that is performed outside of Israel as follows:

 

Manufacturing Volume Outside of Israel   Royalties
to the Chief
Scientist as
a Percentage
of Grant
 
       
Up to 50%     120 %
between 50% and 90%     150 %
90% and more     300 %

 

If the manufacturing is performed outside of Israel by us, the rate of royalties payable by us on revenues from the sale of products manufactured outside of Israel will increase by 1% over the regular rates. If the manufacturing is performed outside of Israel by a third party, the rate of royalties payable by us on those revenues will be equal to the ratio obtained by dividing the amount of the grants received from the Office of the Chief Scientist and our total investment in the project that was funded by these grants. The transfer of no more than 10% of the manufacturing capacity in the aggregate outside of Israel is exempt under the R&D Law from obtaining the prior approval of the IIA. A company requesting funds from the IIA also has the option of declaring in its IIA grant application an intention to perform part of its manufacturing outside Israel, thus avoiding the need to obtain additional approval. On January 6, 2011, the R&D Law was amended to clarify that the potential increased royalties specified in the table above will apply even in those cases where the IIA approval for transfer of manufacturing outside of Israel is not required, namely when the volume of the transferred manufacturing capacity is less than 10% of total capacity or when the company received an advance approval to manufacture abroad in the framework of its IIA grant application.

 

The know-how developed within the framework of the Chief Scientist plan may not be transferred to third parties outside Israel without the prior approval of a governmental committee charted under the R&D Law. The approval, however, is not required for the export of any products developed using grants received from the Chief Scientist. The IIA approval to transfer know-how created, in whole or in part, in connection with an IIA-funded project to third party outside Israel where the transferring company remains an operating Israeli entity is subject to payment of a redemption fee to the IIA calculated according to a formula provided under the R&D Law that is based, in general, on the ratio between the aggregate IIA grants to the company’s aggregate investments in the project that was funded by these IIA grants, multiplied by the transaction consideration. The transfer of such know-how to a party outside Israel where the transferring company ceases to exist as an Israeli entity is subject to a redemption fee formula that is based, in general, on the ratio between the aggregate IIA grants to the total financial investments in the company, multiplied by the transaction consideration. According to the January 2011 amendment, the redemption fee in case of transfer of know-how to a party outside Israel will be based on the ratio between the aggregate IIA grants received by the company and the company’s aggregate R&D expenses, multiplied by the transaction consideration. According to regulations promulgated following the 2011 amendment, the maximum amount payable to the IIA in case of transfer of know how outside Israel shall not exceed 6 times the value of the grants received plus interest, and in the event that the receiver of the grants ceases to be an Israeli corporation such payment shall not exceed 6 times the value of the grants received plus interest, with a possibility to reduce such payment to up to 3 times the value of the grants received plus interest if the R&D activity remains in Israel for a period of three years after payment to the IIA.

 

  71  

 

 

Transfer of know-how within Israel is subject to an undertaking of the recipient Israeli entity to comply with the provisions of the R&D Law and related regulations, including the restrictions on the transfer of know-how and the obligation to pay royalties, as further described in the R&D Law and related regulations.

 

These restrictions may impair our ability to outsource manufacturing, engage in change of control transactions or otherwise transfer our know-how outside Israel and may require us to obtain the approval or the IIA for certain actions and transactions and pay additional royalties to the IIA. In particular, any change of control and any change of ownership of our Ordinary Shares that would make a non-Israeli citizen or resident an “interested party,” as defined in the R&D Law, requires a prior written notice to the IIA in addition to any payment that may be required of us for transfer of manufacturing or know-how outside Israel. If we fail to comply with the R&D Law, we may be subject to criminal charges.

 

Tax Benefits for Research and Development

 

Israeli tax law allows, under certain conditions, a tax deduction for expenditures, including capital expenditures, for the year in which they are incurred. Expenditures are deemed related to scientific research and development projects, if:

 

  The expenditures are approved by the relevant Israeli government ministry, determined by the field of research;

 

  The research and development must be for the promotion of the company; and

 

  The research and development is carried out by or on behalf of the company seeking such tax deduction.

 

The amount of such deductible expenses is reduced by the sum of any funds received through government grants for the finance of such scientific research and development projects. No deduction under these research and development deduction rules is allowed if such deduction is related to an expense invested in an asset depreciable under the general depreciation rules of the income Tax Ordinance, 1961. Expenditures not so approved are deductible in equal amounts over three years.

 

From time to time we may apply the Office of the Chief Scientist for approval to allow a tax deduction for all research and development expenses during the year incurred. There can be no assurance that such application will be accepted.

 

Law for the Encouragement of Capital Investments, 5719-1959

 

The Law for the Encouragement of Capital Investments, 5719-1959, generally referred to as the Investment Law, provides certain incentives for capital investments in production facilities (or other eligible assets).

 

Tax Benefits

 

The Investment Law grants tax benefits for income generated by a “Preferred Company” through its “Preferred Enterprise” (as such terms are defined in the Investment Law) The definition of a Preferred Company includes a company incorporated in Israel that is not fully owned by a governmental entity, and that has, among other things, Preferred Enterprise status and is controlled and managed from Israel. A Preferred Company is entitled to a reduced corporate tax rate of 16% with respect to its income derived by its Preferred Enterprise, unless the Preferred Enterprise is located in a specified development zone, in which case the rate will be 7.5% as of January 1, 2017.

 

Dividends paid out of income attributed to a Preferred Enterprise are generally subject to withholding tax at source at the rate of 20% or such lower rate as may be provided in an applicable tax treaty. However, if such dividends are paid to an Israeli company, no tax is required to be withheld.

 

  72  

 

 

Taxation of our Shareholders

 

Capital Gains Taxes Applicable to Non-Israeli Resident Shareholders. A non-Israeli resident who derives capital gains from the sale of shares in an Israeli resident company will be exempt from Israeli tax so long as the shares were not held through a permanent establishment that the non-resident maintains in Israel. However, non-Israeli corporations will not be entitled to the foregoing exemption if Israeli residents: (i) have a controlling interest of 25% or more in such non-Israeli corporation or (ii) are the beneficiaries of, or are entitled to, 25% or more of the revenues or profits of such non-Israeli corporation, whether directly or indirectly.

 

Additionally, a sale of securities by a non-Israeli resident may be exempt from Israeli capital gains tax under the provisions of an applicable tax treaty. For example, under Convention Between the Government of the United States of America and the Government of the State of Israel with respect to Taxes on Income, as amended (the “United States-Israel Tax Treaty), the sale, exchange or other disposition of shares by a shareholder who is a United States resident (for purposes of the treaty) holding the shares as a capital asset and is entitled to claim the benefits afforded to such a resident by the U.S.-Israel Tax Treaty (a “Treaty U.S. Resident”) is generally exempt from Israeli capital gains tax unless: (i) the capital gain arising from such sale, exchange or disposition is attributed to real estate located in Israel; (ii) the capital gain arising from such sale, exchange or disposition is attributed to royalties; (iii) the capital gain arising from the such sale, exchange or disposition is attributed to a permanent establishment in Israel, under certain terms; (iv) such Treaty U.S. Resident holds, directly or indirectly, shares representing 10% or more of the voting capital during any part of the 12-month period preceding the disposition, subject to certain conditions; or (v) such Treaty U.S. Resident is an individual and was present in Israel for 183 days or more during the relevant taxable year.

 

In some instances where our shareholders may be liable for Israeli tax on the sale of their ordinary shares, the payment of the consideration may be subject to the withholding of Israeli tax at source. Shareholders may be required to demonstrate that they are exempt from tax on their capital gains in order to avoid withholding at source at the time of sale.

 

Taxation of Non-Israeli Shareholders on Receipt of Dividends. Non-Israeli residents are generally subject to Israeli income tax on the receipt of dividends paid on our Ordinary Shares at the rate of 25%, which tax will be withheld at source, unless relief is provided in a treaty between Israel and the shareholder’s country of residence. With respect to a person who is a “substantial shareholder” at the time of receiving the dividend or on any time during the preceding twelve months, the applicable tax rate is 30%. A “substantial shareholder” is generally a person who alone or together with such person’s relative or another person who collaborates with such person on a permanent basis, holds, directly or indirectly, at least 10% of any of the “means of control” of the corporation. “Means of control” generally include the right to vote, receive profits, nominate a director or an executive officer, receive assets upon liquidation, or order someone who holds any of the aforesaid rights how to act, regardless of the source of such right. However, a distribution of dividends to non-Israeli residents is subject to withholding tax at source at a rate of 20% if the dividend is distributed from income attributed to a Preferred Enterprise, unless a reduced tax rate is provided under an applicable tax treaty. For example, under the United States-Israel Tax Treaty, the maximum rate of tax withheld at source in Israel on dividends paid to a holder of our Ordinary Shares who is a Treaty U.S. Resident is 25%. However, generally, the maximum rate of withholding tax on dividends, not generated by a Preferred Enterprise, that are paid to a United States corporation holding 10% or more of the outstanding voting capital throughout the tax year in which the dividend is distributed as well as during the previous tax year, is 12.5%, provided that not more than 25% of the gross income for such preceding year consists of certain types of dividends and interest. Notwithstanding the foregoing, dividends distributed from income attributed to an Preferred Enterprise are not entitled to such reduction under the tax treaty but are subject to a withholding tax rate of 15% for a shareholder that is a U.S. corporation, provided that the condition related to our gross income for the previous year (as set forth in the previous sentence) is met. If the dividend is attributable partly to income derived from a Preferred Enterprise, and partly to other sources of income, the withholding rate will be a blended rate reflecting the relative portions of the two types of income. We cannot assure you that we will designate the profits that we may distribute in a way that will reduce shareholders’ tax liability.

 

  73  

 

 

U.S. Tax Considerations

 

U.S. Federal Income Tax Considerations

 

THE FOLLOWING SUMMARY IS INCLUDED HEREIN FOR GENERAL INFORMATION AND IS NOT INTENDED TO BE, AND SHOULD NOT BE CONSIDERED TO BE, LEGAL OR TAX ADVICE. EACH U.S. HOLDER SHOULD CONSULT WITH HIS OR HER OWN TAX ADVISOR AS TO THE PARTICULAR U.S. FEDERAL INCOME TAX CONSEQUENCES OF THE PURCHASE, OWNERSHIP AND SALE OF ORDINARY SHARES AND AMERICAN DEPOSITORY SHARES, INCLUDING THE EFFECTS OF APPLICABLE STATE, LOCAL, FOREIGN OR OTHER TAX LAWS AND POSSIBLE CHANGES IN THE TAX LAWS.

 

Subject to the limitations described in the next paragraph, the following discussion summarizes the material U.S. federal income tax consequences to a “U.S. Holder” arising from the purchase, ownership and sale of the Ordinary Shares and ADSs. For this purpose, a “U.S. Holder” is a holder of Ordinary Shares or ADSs that is: (1) an individual citizen or resident of the United States, including an alien individual who is a lawful permanent resident of the United States or meets the substantial presence residency test under U.S. federal income tax laws; (2) a corporation (or entity treated as a corporation for U.S. federal income tax purposes) or a partnership (other than a partnership that is not treated as a U.S. person under any applicable U.S. Treasury regulations) created or organized under the laws of the United States or the District of Columbia or any political subdivision thereof; (3) an estate, the income of which is includable in gross income for U.S. federal income tax purposes regardless of source; (4) a trust if a court within the United States is able to exercise primary supervision over the administration of the trust and one or more U.S. persons have authority to control all substantial decisions of the trust; or (5) a trust that has a valid election in effect to be treated as a U.S. person to the extent provided in U.S. Treasury regulations.

 

This summary is for general information purposes only and does not purport to be a comprehensive description of all of the U.S. federal income tax considerations that may be relevant to a decision to purchase our Ordinary Shares or ADSs. This summary generally considers only U.S. Holders that will own our Ordinary Shares or ADSs as capital assets. Except to the limited extent discussed below, this summary does not consider the U.S. federal tax consequences to a person that is not a U.S. Holder, nor does it describe the rules applicable to determine a taxpayer’s status as a U.S. Holder. This summary is based on the provisions of the Internal Revenue Code of 1986, as amended, or the Code, final, temporary and proposed U.S. Treasury regulations promulgated thereunder, administrative and judicial interpretations thereof, and the U.S./Israel Income Tax Treaty, all as in effect as of the date hereof and all of which are subject to change, possibly on a retroactive basis, and all of which are open to differing interpretations. We will not seek a ruling from the IRS with regard to the U.S. federal income tax treatment of an investment in our Ordinary Shares or ADSs by U.S. Holders and, therefore, can provide no assurances that the IRS will agree with the conclusions set forth below.

   

This discussion does not address all of the aspects of U.S. federal income taxation that may be relevant to a particular U.S. holder based on such holder’s particular circumstances and in particular does not discuss any estate, gift, generation-skipping, transfer, state, local, excise or foreign tax considerations. In addition, this discussion does not address the U.S. federal income tax treatment of a U.S. Holder who is: (1) a bank, life insurance company, regulated investment company, or other financial institution or “financial services entity”; (2) a broker or dealer in securities or foreign currency; (3) a person who acquired our Ordinary Shares or ADSs in connection with employment or other performance of services; (4) a U.S. Holder that is subject to the U.S. alternative minimum tax; (5) a U.S. Holder that holds our Ordinary Shares or ADSs as a hedge or as part of a hedging, straddle, conversion or constructive sale transaction or other risk-reduction transaction for U.S. federal income tax purposes; (6) a tax-exempt entity; (7) real estate investment trusts or grantor trusts; (8) a U.S. Holder that expatriates out of the United States or a former long-term resident of the United States; or (9) a person having a functional currency other than the U.S. dollar. This discussion does not address the U.S. federal income tax treatment of a U.S. Holder that owns, directly or constructively, at any time, Ordinary Shares or ADSs representing 10% or more of our voting power. Additionally, the U.S. federal income tax treatment of persons who hold Ordinary Shares or ADSs through a partnership or other pass-through entity are not considered.

 

  74  

 

 

Each prospective investor is advised to consult his or her own tax adviser for the specific tax consequences to that investor of purchasing, holding or disposing of our Ordinary Shares or ADSs, including the effects of applicable state, local, foreign or other tax laws and possible changes in the tax laws.

 

Taxation of Dividends Paid on Ordinary Shares   or ADSs

 

We do not intend to pay dividends in the foreseeable future. In the event that we do pay dividends, and subject to the discussion under the heading “Passive Foreign Investment Companies” below, a U.S. Holder, other than certain U.S. Holder’s that are U.S. corporations, will be required to include in gross income as ordinary income the amount of any distribution paid on Ordinary Shares or ADSs (including the amount of any Israeli tax withheld on the date of the distribution), to the extent that such distribution does not exceed our current and accumulated earnings and profits, as determined for U.S. federal income tax purposes. The amount of a distribution which exceeds our earnings and profits will be treated first as a non-taxable return of capital, reducing the U.S. Holder’s tax basis for the Ordinary Shares to the extent thereof, and then capital gain. Corporate holders generally will not be allowed a deduction for dividends received. We do not expect to maintain calculations of our earnings and profits under U.S. federal income tax principles and, therefore, U.S. Holder’s should expect that the entire amount of any distribution generally will be reported as dividend income.

 

On December 22, 2017, President Trump signed into law the Tax Cuts and Jobs Act, or the TCJA. The TCJA provides a 100% deduction for the foreign-source portion of dividends received from “specified 10-percent owned foreign corporations” by U.S. corporate holders, subject to a one-year holding period. No foreign tax credit, including Israeli withholding tax (or deduction for foreign taxes paid with respect to qualifying dividends) would be permitted for foreign taxes paid or accrued with respect to a qualifying dividend. Deduction would be unavailable for “hybrid dividends.” The dividend received deduction enacted under the TCJA may not apply to dividends from a passive foreign investment company, as discussed below.

 

In general, preferential tax rates for “qualified dividend income” and long-term capital gains are applicable for U.S. Holders that are individuals, estates or trusts. For this purpose, “qualified dividend income” means, inter alia, dividends received from a “qualified foreign corporation.” A “qualified foreign corporation” is a corporation that is entitled to the benefits of a comprehensive tax treaty with the United States which includes an exchange of information program. The IRS has stated that the Israel/U.S. Tax Treaty satisfies this requirement and we believe we are eligible for the benefits of that treaty.

 

In addition, our dividends will be qualified dividend income if our Ordinary Shares or ADSs are readily tradable on the Nasdaq Capital Market or another established securities market in the United States. Dividends will not qualify for the preferential rate if we are treated, in the year the dividend is paid or in the prior year, as a PFIC, as described below under “Passive Foreign Investment Companies”. A U.S. Holder will not be entitled to the preferential rate: (1) if the U.S. Holder has not held our Ordinary Shares or ADSs for at least 61 days of the 121 day period beginning on the date which is 60 days before the ex-dividend date, or (2) to the extent the U.S. Holder is under an obligation to make related payments on substantially similar property. Any days during which the U.S. Holder has diminished its risk of loss on our Ordinary Shares or ADSs are not counted towards meeting the 61-day holding period. Finally, U.S. Holders who elect to treat the dividend income as “investment income” pursuant to Code section 163(d)(4) will not be eligible for the preferential rate of taxation.

  

The amount of a distribution with respect to our Ordinary Shares or ADSs will be measured by the amount of the fair market value of any property distributed, and for U.S. federal income tax purposes, the amount of any Israeli taxes withheld therefrom. Cash distributions paid by us in NIS will be included in the income of U.S. Holders at a U.S. dollar amount based upon the spot rate of exchange in effect on the date the dividend is includible in the income of the U.S. Holder, and U.S. Holders will have a tax basis in such NIS for U.S. federal income tax purposes equal to such U.S. dollar value. If the U.S. Holder subsequently converts the NIS into U.S. dollars or otherwise disposes of it, any subsequent gain or loss in respect of such NIS arising from exchange rate fluctuations will be U.S. source ordinary exchange gain or loss.

  

Distributions paid by us will generally be foreign source income for U.S. foreign tax credit purposes and will generally be considered passive category income for such purposes. Subject to the limitations set forth in the Code, and the TCJA, U.S. Holders may elect to claim a foreign tax credit against their U.S. federal income tax liability for Israeli income tax withheld from distributions received in respect of the Ordinary Shares or ADSs. The rules relating to the determination of the U.S. foreign tax credit are complex, and U.S. Holders should consult with their own tax advisors to determine whether, and to what extent, they are entitled to such credit. U.S. Holders that do not elect to claim a foreign tax credit may instead claim a deduction for Israeli income taxes withheld, provided such U.S. Holders itemize their deductions.

 

Taxation of the Disposition of Ordinary Shares or ADSs

 

Except as provided under the PFIC rules described below under “Passive Foreign Investment Companies”, upon the sale, exchange or other disposition of our Ordinary Shares or ADSs, a U.S. Holder will recognize capital gain or loss in an amount equal to the difference between such U.S. Holder’s tax basis for the Ordinary Shares or ADSs in U.S. dollars and the amount realized on the disposition in U.S. dollar (or its U.S. dollar equivalent determined by reference to the spot rate of exchange on the date of disposition, if the amount realized is denominated in a foreign currency ). The gain or loss realized on the sale, exchange or other disposition of Ordinary Shares or ADSs will be long-term capital gain or loss if the U.S. Holder has a holding period of more than one year at the time of the disposition.

 

  75  

 

 

Gain realized by a U.S. Holder on a sale, exchange or other disposition of Ordinary Shares or ADSs will generally be treated as U.S. source income for U.S. foreign tax credit purposes. A loss realized by a U.S. Holder on the sale, exchange or other disposition of Ordinary Shares or ADSs is generally allocated to U.S. source income. The deductibility of a loss realized on the sale, exchange or other disposition of Ordinary Shares or ADSs is subject to limitations. An additional 3.8% net investment income tax (described below) may apply to gains recognized upon the sale, exchange or other taxable disposition of our Ordinary Shares or ADS by certain U.S. Holders who meet certain income thresholds.

 

Passive Foreign Investment Companies

 

Special U.S. federal income tax laws apply to U.S. taxpayers who own shares of a corporation that is a PFIC. We will be treated as a PFIC for U.S. federal income tax purposes for any taxable year that either:

 

  75% or more of our gross income (including our pro rata share of gross income for any company, in which we are considered to own 25% or more of the shares by value), in a taxable year is passive; or

 

  At least 50% of our assets, averaged over the year and generally determined based upon fair market value (including our pro rata share of the assets of any company in which we are considered to own 25% or more of the shares by value) are held for the production of, or produce, passive income.

 

For this purpose, passive income generally consists of dividends, interest, rents, royalties, annuities and income from certain commodities transactions and from notional principal contracts. Cash is treated as generating passive income.

 

We believe that we will not be a PFIC for the current taxable year and do not expect to become a PFIC in the foreseeable future. The tests for determining PFIC status are applied annually, and it is difficult to make accurate projections of future income and assets which are relevant to this determination. In addition, our PFIC status may depend in part on the market value of our Ordinary Shares. Accordingly, there can be no assurance that we currently are not or will not become a PFIC.

 

If we currently are or become a PFIC, each U.S. Holder who has not elected to treat us as a QEF by making a “QEF election”, or who has not elected to mark the shares to market (as discussed below), would, upon receipt of certain distributions by us and upon disposition of our Ordinary Shares or ADSs at a gain:  (1) have such distribution or gain allocated ratably over the U.S. Holder’s holding period for the Ordinary Shares or ADSs, as the case may be; (2) the amount allocated to the current taxable year and any period prior to the first day of the first taxable year in which we were a PFIC would be taxed as ordinary income; and (3) the amount allocated to each of the other taxable years would be subject to tax at the highest rate of tax in effect for the applicable class of taxpayer for that year, and an interest charge for the deemed deferral benefit would be imposed with respect to the resulting tax attributable to each such other taxable year . In addition, when shares of a PFIC are acquired by reason of death from a decedent that was a U.S. Holder, the tax basis of such shares would not receive a step-up to fair market value as of the date of the decedent’s death, but instead would be equal to the decedent’s basis if lower, unless all gain were recognized by the decedent. Indirect investments in a PFIC may also be subject to these special U.S. federal income tax rules.

  

The PFIC rules described above would not apply to a U.S. Holder who makes a QEF election for all taxable years that such U.S. Holder has held the Ordinary Shares or ADSs while we are a PFIC, provided that we comply with specified reporting requirements. Instead, each U.S. Holder who has made such a QEF election is required for each taxable year that we are a PFIC to include in income such U.S. Holder’s pro rata share of our ordinary earnings as ordinary income and such U.S. Holder’s pro rata share of our net capital gains as long-term capital gain, regardless of whether we make any distributions of such earnings or gain. In general, a QEF election is effective only if we make available certain required information. The QEF election is made on a shareholder-by-shareholder basis and generally may be revoked only with the consent of the IRS. We do not intend to notify U.S. Holders if we believe we will be treated as a PFIC for any tax year. In addition, we do not intend to furnish U.S. Holders annually with information needed in order to complete IRS Form 8621 and to make and maintain a valid QEF election for any year in which we or any of our Subsidiaries are a PFIC. U.S. Holders should consult with their own tax advisors regarding eligibility, manner and advisability of making a QEF election if we are treated as a PFIC.

 

  76  

 

 

In addition, the PFIC rules described above would not apply if we were a PFIC and a U.S. Holder made a mark-to-market election. A U.S. Holder of our Ordinary Shares or ADSs which are regularly traded on a qualifying exchange, including the Nasdaq Capital Market, can elect to mark the Ordinary Shares or ADSs to market annually, recognizing as ordinary income or loss each year an amount equal to the difference as of the close of the taxable year between the fair market value of the Ordinary Shares or ADSs and the U.S. Holder’s adjusted tax basis in the Ordinary Shares or ADSs. Losses are allowed only to the extent of net mark-to-market gain previously included income by the U.S. Holder under the election for prior taxable years.

 

U.S. Holders who hold our Ordinary Shares or ADSs during a period when we are a PFIC will be subject to the foregoing rules, even if we cease to be a PFIC. U.S. Holders are strongly urged to consult their tax advisors about the PFIC rules, including tax return filing requirements and the eligibility , manner, and consequences to them of making a QEF or mark-to-market election with respect to our Ordinary Shares or ADSs in the event that we are a PFIC.

 

Tax on Net Investment Income

 

For taxable years beginning after December 31, 2013, U.S. Holders who are individuals, estates or trusts will generally be required to pay a 3.8% Medicare tax on their net investment income (including dividends on and gains from the sale or other disposition of our Ordinary Shares or ADSs), or in the case of estates and trusts on their net investment income that is not distributed. In each case, the 3.8% Medicare tax applies only to the extent the U.S. Holder’s total adjusted income exceeds applicable thresholds.

 

Tax Consequences for Non-U.S. Holders of Ordinary Shares or ADSs

 

Except as provided below, an individual, corporation, estate or trust that is not a U.S. Holder referred to below as a non-U.S. Holder, generally will not be subject to U.S. federal income or withholding tax on the payment of dividends on, and the proceeds from the disposition of, our Ordinary Shares or ADSs.

 

A non-U.S. Holder may be subject to U.S. federal income tax on a dividend paid on our Ordinary Shares or ADSs or gain from the disposition of our Ordinary Shares or ADSs if: (1) such item is effectively connected with the conduct by the non-U.S. Holder of a trade or business in the United States and, if required by an applicable income tax treaty is attributable to a permanent establishment or fixed place of business in the United States; (2) in the case of a disposition of our Ordinary Shares or ADSs, the individual non-U.S. Holder is present in the United States for 183 days or more in the taxable year of the disposition and other specified conditions are met.

 

In general, non-U.S. Holders will not be subject to backup withholding with respect to the payment of dividends on our Ordinary Shares or ADSs if payment is made through a paying agent, or office of a foreign broker outside the United States. However, if payment is made in the United States or by a U.S. related person, non-U.S. Holders may be subject to backup withholding, unless the non-U.S. Holder provides an applicable IRS Form W-8 (or a substantially similar form) certifying its foreign status, or otherwise establishes an exemption.

 

The amount of any backup withholding from a payment to a non-U.S. Holder will be allowed as a credit against such holder’s U.S. federal income tax liability and may entitle such holder to a refund, provided that the required information is timely furnished to the IRS.

 

Information Reporting and Withholding

 

A U.S. Holder may be subject to backup withholding at a rate of 28% with respect to cash dividends and proceeds from a disposition of Ordinary Shares or ADSs. In general, backup withholding will apply only if a U.S. Holder fails to comply with specified identification procedures. Backup withholding will not apply with respect to payments made to designated exempt recipients, such as corporations and tax-exempt organizations. Backup withholding is not an additional tax and may be claimed as a credit against the U.S. federal income tax liability of a U.S. Holder, provided that the required information is timely furnished to the IRS.

 

  77  

 

 

Pursuant to recently enacted legislation, a U.S. Holder with interests in “specified foreign financial assets” (including, among other assets, our Ordinary Shares or ADSs, unless such Ordinary Shares or ADSs are held on such U.S. Holder’s behalf through a financial institution) may be required to file an information report with the IRS if the aggregate value of all such assets exceeds $50,000 on the last day of the taxable year or $75,000 at any time during the taxable year (or such higher dollar amount as may be prescribed by applicable IRS guidance); and may be required to file a Report of Foreign Bank and Financial Accounts, or FBAR, if the aggregate value of the foreign financial accounts exceeds $10,000 at any time during the calendar year. You should consult your own tax advisor as to the possible obligation to file such information report.

 

Tax Cuts and Jobs Act

 

On December 22, 2017, President Trump signed into law the TCJA. Although this is the most extensive overhaul of the United States tax regime in over thirty years, other than for certain U.S. corporate holder’s, none of the provisions of the TCJA are expected to materially impact U.S. Holder’s with respect to such holder’s ownership of our Ordinary Shares or the ADSs.

 

F. Dividends and Paying Agents

 

Not applicable.

 

G. Statement by Experts

 

Not applicable.

 

H. Documents on Display

 

We are subject to certain information reporting requirements of the Exchange Act, applicable to foreign private issuers and under those requirements will file reports with the SEC. You may read and copy the annual report on Form 20-F, including the related exhibits and schedules, and any document we file with the SEC without charge at the SEC’s public reference room at 100 F Street, N.E., Room 1580, Washington, DC 20549. You may also obtain copies of the documents at prescribed rates by writing to the Public Reference Section of the SEC at 100 F Street, N.E., Room 1580, Washington, DC 20549. Please call the SEC at 1-800-SEC-0330 for further information on the public reference room. The SEC also maintains an Internet website that contains reports and other information regarding issuers that file electronically with the SEC. Our filings with the SEC will also available to the public through the SEC’s website at www.sec.gov.

 

  78  

 

 

As a foreign private issuer, we are exempt from the rules under the Exchange Act related to the furnishing and content of proxy statements, and our officers, directors and principal shareholders will be exempt from the reporting and short-swing profit recovery provisions contained in Section 16 of the Exchange Act. In addition, we are not required under the Exchange Act to file annual, quarterly and current reports and financial statements with the SEC as frequently or as promptly as U.S. domestic companies whose securities are registered under the Exchange Act. However, we will file with the SEC, within 120 days after the end of each fiscal year, or such applicable time as required by the SEC, an annual report on Form 20-F containing financial statements audited by an independent registered public accounting firm, and may submit to the SEC, on a Form 6-K, unaudited quarterly financial information.

 

In addition, since our Ordinary Shares are traded on the TASE, we have filed Hebrew language periodic and immediate reports with, and furnish information to, the TASE and the Israel Securities Authority, or the ISA, as required under Chapter Six of the Israel Securities Law, 1968. Copies of our filings with the ISA can be retrieved electronically through the MAGNA distribution site of the ISA (www.magna.isa.gov.il) and the TASE website (www.maya.tase.co.il).

 

We maintain a corporate website http://www.nano-di.com. Information contained on, or that can be accessed through, our website and the other websites referenced above do not constitute a part of this annual report on Form 20-F. We have included these website addresses in this annual report on Form 20-F solely as inactive textual references.

 

I. Subsidiary Information.

 

Not applicable.

 

ITEM 11. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

 

In the ordinary course of our operations, we are exposed to certain market risks, primarily changes in foreign currency exchange rates and interest rates.

 

Quantitative and Qualitative Disclosure About Market Risk

 

We are exposed to market risks in the ordinary course of our business. Market risk represents the risk of loss that may impact our financial position due to adverse changes in financial market prices and rates. Our current investment policy is to invest available cash in bank deposits with banks that have a credit rating of at least A-minus. Accordingly, a substantial majority of our cash is held in deposits that bear interest. Given the current low rates of interest we receive, we will not be adversely affected if such rates are reduced. Our market risk exposure is primarily a result of NIS/U.S. dollar exchange rates, which is discussed in detail in the following paragraph.

 

Foreign Currency Exchange Risk

 

Our results of operations and cash flow are subject to fluctuations due to changes in NIS/U.S. dollar currency exchange rates. The vast majority of our liquid assets is held in U.S. dollars, and a certain portion of our expenses is denominated in NIS. Changes of 5% and 10% in the U.S. Dollar/NIS exchange rate would increase/decrease our loss for 2017 by 0.63% and 1.26%, respectively. However, these historical figures may not be indicative of future exposure, as we expect that the percentage of our NIS denominated expenses will materially decrease in the near future, therefore reducing our exposure to exchange rate fluctuations.

 

We do not hedge our foreign currency exchange risk. In the future, we may enter into formal currency hedging transactions to decrease the risk of financial exposure from fluctuations in the exchange rates of our principal operating currencies. These measures, however, may not adequately protect us from the material adverse effects of such fluctuations.

 

  79  

 

 

ITEM 12. DESCRIPTION OF SECURITIES OTHER THAN EQUITY SECURITIES

 

A. Debt Securities.

 

Not applicable.

 

B. Warrants and rights.

 

Not applicable.

 

C. Other Securities.

 

Not applicable.

 

D. American Depositary Shares

 

Fees and Expenses

 

The following table shows the fees and expenses that a holder of our ADSs may have to pay, either directly or indirectly:

 

Persons depositing or withdrawing shares or ADS holders must pay :   For:
     
$5.00 (or less) per 100 ADSs (or portion of 100 ADSs).  

Issuance of ADSs, including issuances resulting from a distribution of shares or rights or other property.

 

Cancellation of ADSs for the purpose of withdrawal, including if the deposit agreement terminates.

 

$.05 (or less) per ADS.  

Any cash distribution to ADS holders.

 

A fee equivalent to the fee that would be payable if securities distributed to you had been shares and the shares had been deposited for issuance of ADSs.

 

  Distribution of securities distributed to holders of deposited securities (including rights) that are distributed by the depositary to ADS holders.
$.05 (or less) per ADS per calendar year.  

Depositary services.

 

Registration or transfer fees.  

Transfer and registration of shares on our share register to or from the name of the depositary or its agent when you deposit or withdraw shares.

 

Expenses of the depositary.  

Cable, telex and facsimile transmissions (when expressly provided in the deposit agreement).

 

Converting foreign currency to U.S. dollars.

 

Taxes and other governmental charges the depositary or the custodian has to pay on any ADSs or shares underlying ADSs, such as stock transfer taxes, stamp duty or withholding taxes.

 

 

As necessary.

 

Any charges incurred by the depositary or its agents for servicing the deposited securities.   As necessary.

 

The depositary collects its fees for delivery and surrender of ADSs directly from investors depositing shares or surrendering ADSs for the purpose of withdrawal or from intermediaries acting for them. The depositary collects fees for making distributions to investors by deducting those fees from the amounts distributed or by selling a portion of distributable property to pay the fees. The depositary may collect its annual fee for depositary services by deduction from cash distributions or by directly billing investors or by charging the book-entry system accounts of participants acting for them. The depositary may collect any of its fees by deduction from any cash distribution payable (or by selling a portion of securities or other property distributable) to ADS holders that are obligated to pay those fees. The depositary may generally refuse to provide fee-attracting services until its fees for those services are paid.

 

From time to time, the depositary may make payments to us to reimburse us for costs and expenses generally arising out of establishment and maintenance of the ADS program, waive fees and expenses for services provided to us by the depositary or share revenue from the fees collected from ADS holders. In performing its duties under the deposit agreement, the depositary may use brokers, dealers, foreign currency or other service providers that are owned by or affiliated with the depositary and that may earn or share fees, spreads or commissions.

 

  80  

 

 

PART II

 

ITEM 13. DEFAULTS, DIVIDEND ARREARAGES AND DELINQUENCIES

 

None.

 

ITEM 14. MATERIAL MODIFICATIONS TO THE RIGHTS OF SECURITY HOLDERS AND USE OF PROCEEDS

 

None.

 

ITEM 15. CONTROLS AND PROCEDURES

 

(a) Disclosure Controls and Procedures

 

Our management, with the participation of our Chief Executive Officer and Chief Financial Officer, has evaluated the effectiveness of our disclosure controls and procedures (as such term is defined in Rules 13a-15(e) and 15d-15(e) under the Exchange Act) as of December 31, 2017, or the Evaluation Date. Based on such evaluation, those officers have concluded that, as of the Evaluation Date, our disclosure controls and procedures are effective in recording, processing, summarizing and reporting, on a timely basis, information required to be included in periodic filings under the Exchange Act and that such information is accumulated and communicated to management, including our principal executive and financial officers, as appropriate to allow timely decisions regarding required disclosure.

 

(b) Management’s Annual Report on Internal Control over Financial Reporting

 

Our management is responsible for establishing and maintaining adequate internal control over financial reporting, as such term is defined in Rule 13a-15(f) under the Exchange Act. Under the supervision and with the participation of our management, including our Chief Executive Officer and Chief Financial Officer, we conducted an evaluation of the effectiveness of our internal control over financial reporting based principally on the framework and criteria established in Internal Control - Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission as of the end of the period covered by this report. Based on that evaluation, our management has concluded that our internal control over financial reporting was effective as of December 31, 2017 at providing reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles.

 

(c) Attestation Report of the Registered Public Accounting Firm

 

This annual report does not include an attestation report of our independent registered public accounting firm regarding internal control over financial reporting due to an exemption for emerging growth companies provided in the JOBS Act.

 

(d) Changes in Internal Control over Financial Reporting

 

During the year ended December 31, 2017, there were no changes in our internal control over financial reporting that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.

 

  81  

 

 

ITEM 16A. AUDIT COMMITTEE FINANCIAL EXPERT

 

Our board of directors has determined that each member of our audit committee is an audit committee financial expert, as defined under the rules under the Exchange Act, and is independent in accordance with applicable Exchange Act rules and Nasdaq Stock Market rules.

 

ITEM 16B. CODE OF ETHICS

 

We have adopted a written code of ethics that applies to our officers and employees, including our principal executive officer, principal financial officer, principal controller and persons performing similar functions as well as our directors. Our Code of Business Conduct and Ethics is posted on our website at www.nano-di.com. Information contained on, or that can be accessed through, our website does not constitute a part of this annual report on Form 20-F and is not incorporated by reference herein. If we make any amendment to the Code of Business Conduct and Ethics or grant any waivers, including any implicit waiver, from a provision of the code, we will disclose the nature of such amendment or waiver on our website to the extent required by the rules and regulations of the SEC including the instructions to Item 16B of Form 20-F. We have not granted any waivers under our Code of Business Conduct and Ethics.

 

ITEM 16C. PRINCIPAL ACCOUNTANT FEES AND SERVICES

 

Somekh Chaikin, a member firm of KPMG International, has served as our principal independent registered public accounting firm for each of the two years ended December 31, 2016 and 2017.

 

The following table provides information regarding fees paid by us to Somekh Chaikin and/or other member firms of KPMG International for all services, including audit services, for the years ended December 31, 2016 and 2017:

 

    Year Ended
December 31,
 
    2016     2017  
                 
Audit fees (1)   $ 143,000     $ 102,800  
Audit-related fees     -        
Tax fees     -       14,590  
All other fees     -       -  
                 
Total   $ 143,000     $ 117,390  

 

(1) Includes professional services rendered in connection with the audit of our annual financial statements, review of our interim financial statements, and fees relating to our public offering of ADSs.

 

  82  

 

 

Pre-Approval of Auditors’ Compensation

 

Our audit committee has a pre-approval policy for the engagement of our independent registered public accounting firm to perform certain audit and non-audit services. Pursuant to this policy, which is designed to assure that such engagements do not impair the independence of our auditors, the audit committee pre-approves annually a catalog of specific audit and non-audit services in the categories of audit services, audit-related services and tax services that may be performed by our independent registered public accounting firm. If a type of service, that is to be provided by our auditors, has not received such general pre-approval, it will require specific pre-approval by our audit committee. The policy prohibits retention of the independent registered public accounting firm to perform the prohibited non-audit functions defined in applicable SEC rules.

 

ITEM 16D. EXEMPTIONS FROM THE LISTING STANDARDS FOR AUDIT COMMITTEES

 

Not applicable.

 

ITEM 16E. PURCHASES OF EQUITY SECURITIES BY THE ISSUER AND AFFILIATED PURCHASERS

 

Not applicable.

 

ITEM 16F. CHANGE IN REGISTRANT’S CERTIFYING ACCOUNTANT

 

Not applicable.

 

ITEM 16G. CORPORATE GOVERNANCE

 

The Sarbanes-Oxley Act, as well as related rules subsequently implemented by the SEC, require foreign private issuers, such as us, to comply with various corporate governance practices. In addition, we are required to comply with the Nasdaq Stock Market rules. Under those rules, we may elect to follow certain corporate governance practices permitted under the Companies Law in lieu of compliance with corresponding corporate governance requirements otherwise imposed by the Nasdaq Stock Market rules for U.S. domestic issuers.

 

In accordance with Israeli law and practice and subject to the exemption set forth in Rule 5615 of the Nasdaq Stock Market rules, we have elected to follow the provisions of the Companies Law, rather than the Nasdaq Stock Market rules, with respect to the following requirements:

 

  Distribution of periodic reports to shareholders; proxy solicitation. As opposed to the Nasdaq Stock Market rules, which require listed issuers to make such reports available to shareholders in one of a number of specific manners, Israeli law does not require us to distribute periodic reports directly to shareholders, and the generally accepted business practice in Israel is not to distribute such reports to shareholders but to make such reports available through a public website. In addition to making such reports available on a public website, we currently make our audited financial statements available to our shareholders at our offices and will only mail such reports to shareholders upon request. As a foreign private issuer, we are generally exempt from the SEC’s proxy solicitation rules.

 

  83  

 

 

  Quorum . While the Nasdaq Stock Market rules require that the quorum for purposes of any meeting of the holders of a listed company’s common voting stock, as specified in the company’s bylaws, be no less than 33 1/3% of the company’s outstanding common voting stock, under Israeli law, a company is entitled to determine in its articles of association the number of shareholders and percentage of holdings required for a quorum at a shareholders meeting. Our amended and restated articles of association provide that a quorum of two or more shareholders holding at least 25% of the voting rights in person or by proxy is required for commencement of business at a general meeting. However, the quorum set forth in our amended and restated articles of association with respect to an adjourned meeting consists of any number of shareholders present in person or by proxy.

 

  Compensation of officers. Israeli law and our amended and restated articles of association do not require that the independent members of our board of directors (or a compensation committee composed solely of independent members of our board of directors) determine an executive officer’s compensation, as is generally required under the Nasdaq Stock Market rules with respect to the CEO and all other executive officers. Instead, compensation of executive officers is determined and approved by our compensation committee and our board of directors, and in certain circumstances by our shareholders, either in consistency with our office holder compensation policy or, in special circumstances in deviation therefrom, taking into account certain considerations stated in the Companies Law.

 

Shareholder approval is generally required for officer compensation in the event (i) approval by our board of directors and our compensation committee is not consistent with our office holder compensation policy, or (ii) compensation required to be approved is that of our chief executive officer who is not a director or an executive officer who is also the controlling shareholder of our company (including an affiliate thereof). Such shareholder approval shall require a majority vote of the shares present and voting at a shareholders meeting, provided either (i) such majority includes a majority of the shares held by non-controlling shareholders who do not otherwise have a personal interest in the compensation arrangement that are voted at the meeting, excluding for such purpose any abstentions disinterested majority, or (ii) the total shares held by non-controlling and disinterested shareholders voted against the arrangement does not exceed 2% of the voting rights in our company.

 

Additionally, approval of the compensation of an executive officer who is also a director requires a simple majority vote of the shares present and voting at a shareholders meeting, if consistent with our office holder compensation policy. Our compensation committee and board of directors may, in special circumstances, approve the compensation of an executive officer (other than a director, a chief executive officer or a controlling shareholder) or approve the compensation policy despite shareholders’ objection, based on specified arguments and taking shareholders’ objection into account. Our compensation committee may further exempt an engagement with a nominee for the position of chief executive officer, who meets the non-affiliation requirements set forth for an external director, from requiring shareholder approval, if such engagement is consistent with our office holder compensation policy and our compensation committee determines based on specified arguments that presentation of such engagement to shareholder approval is likely to prevent such engagement. To the extent that any such transaction with a controlling shareholder is for a period exceeding three years, approval is required once every three years.

 

A director or executive officer may not be present when the board of directors of a company discusses or votes upon a transaction in which he or she has a personal interest, except in case of ordinary transactions, unless the chairman of the board of directors determines that he or she should be present to present the transaction that is subject to approval.

 

  84  

 

 

  Shareholder approval. We will seek shareholder approval for all corporate actions requiring such approval under the requirements of the Companies Law, rather than seeking approval for corporation actions in accordance with Nasdaq Listing Rule 5635. In particular, under this Nasdaq Stock Market rule, shareholder approval is generally required for: (i) an acquisition of shares/assets of another company that involves the issuance of 20% or more of the acquirer’s shares or voting rights or if a director, officer or 5% shareholder has greater than a 5% interest in the target company or the consideration to be received; (ii) the issuance of shares leading to a change of control; (iii) adoption/amendment of equity compensation arrangements (although under the provisions of the Companies Law there is no requirement for shareholder approval for the adoption/amendment of the equity compensation plan); and (iv) issuances of 20% or more of the shares or voting rights (including securities convertible into, or exercisable for, equity) of a listed company via a private placement (and/or via sales by directors/officers/5% shareholders) if such equity is issued (or sold) at below the greater of the book or market value of shares. By contrast, under the Companies Law, shareholder approval is required for, among other things: (i) transactions with directors concerning the terms of their service or indemnification, exemption and insurance for their service (or for any other position that they may hold at a company), for which approvals of the compensation committee, board of directors and shareholders are all required, (ii) extraordinary transactions with controlling shareholders of publicly held companies, which require the special approval, and (iii) terms of employment or other engagement of the controlling shareholder of us or such controlling shareholder’s relative, which require special approval. In addition, under the Companies Law, a merger requires approval of the shareholders of each of the merging companies.

 

  Approval of Related Party Transactions . All related party transactions are approved in accordance with the requirements and procedures for approval of interested party acts and transaction as set forth in the Companies Law, which requires the approval of the audit committee, or the compensation committee, as the case may be, the board of directors and shareholders, as may be applicable, for specified transactions, rather than approval by the audit committee or other independent body of our board of directors as required under the Nasdaq Stock Market rules.

 

ITEM 16H. MINE SAFETY DISCLOSURE

 

Not applicable.

 

  85  

 

 

PART III

 

ITEM 17. FINANCIAL STATEMENTS

 

We have elected to provide financial statements and related information pursuant to Item 18.

 

ITEM 18. FINANCIAL STATEMENTS

 

The consolidated financial statements and the related notes required by this Item are included in this annual report on Form 20-F beginning on page F-1.

 

ITEM 19. EXHIBITS.

 

Exhibit   Description
     
1.1   Amended and Restated Articles of Association of Nano Dimension Ltd., filed as Exhibit 99.1 to Form 6-K filed on November 24, 2017, and incorporated herein by reference.
     
2.1   Amended and Restated Form of Depositary Agreement among Nano Dimension Ltd., The Bank of New York Mellon as Depositary, and owners and holders from time to time of ADSs issued thereunder, including the Form of American Depositary Shares, filed as Exhibit 1 to the Post Effective Amendment No. 1 to Form F-6 (File No. 333-204797) filed on February 22, 2016, and incorporated herein by reference.
     
4.1^   Amended and Restated License Agreement, dated April 2, 2015, by and between the Company and Yissum Research Development Company of The Hebrew University of Jerusalem, Ltd., filed as Exhibit 4.1 to Form 20-F/A (File No. 001-37600) filed on February 29, 2016, and incorporated herein by reference.
     
4.2   Nano Dimension Ltd. 2015 Stock Option Plan, filed as Exhibit 4.4 to Form 20-F/A (File No. 001-37600) filed on February 29, 2016, and incorporated herein by reference.
     
4.3   Employment Agreement, dated October 13, 2015, between the Company and Amit Dror, filed as Exhibit 4.5 to Form 20-F (File No. 001-37600) filed on October 20, 2015, and incorporated herein by reference.
     
4.4   Employment Agreement, dated October 13, 2015, between the Company and Simon Fried, filed as Exhibit 4.6 to Form 20-F (File No. 001-37600) filed on October 20, 2015, and incorporated herein by reference.
     
8.1   List of Subsidiaries.
     
12.1   Certification of the Chief Executive Officer pursuant to rule 13a-14(a) of the Securities Exchange Act of 1934.
     
12.2   Certification of the Principal Financial and Accounting Officer pursuant to rule 13a-14(a) of the Securities Exchange Act of 1934.
     
13.1   Certification of the Chief Executive Officer pursuant to 18 U.S.C. 1350, furnished herewith.
     
13.2   Certification of the Principal Financial and Accounting Officer pursuant to 18 U.S.C. 1350, furnished herewith.
     
15.1   Consent of Somekh Chaikin (Member firm of KPMG International).

 

^ Portions of this exhibit have been omitted pursuant to a request for confidential treatment.

 

  86  

 

 

SIGNATURES

 

The registrant hereby certifies that it meets all of the requirements for filing on Form 20-F and that it has duly caused and authorized the undersigned to sign this annual report on Form 20-F filed on its behalf.

 

  NANO DIMENSION LTD.
     
  By: /s/ Amit Dror
    Amit Dror
    Chief Executive Officer
     

Date: March 15, 2018

 

  87  

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Nano-Dimension Ltd.

 

 

Consolidated Financial Statements as of December 31, 2017

 

 

 

 

 

 

 

 

 

 

 

 

 

  F- 1  

 

 

Table of Contents

 

  Page
   
Report of Independent Registered Public Accounting Firm F-3
   
Consolidated Financial Statements as of December 31, 2017  
   
Consolidated Statements of Financial Position F-4
   
Consolidated Statements of Profit or Loss and Other Comprehensive Income F-5
   
Consolidated Statements of Changes in Equity F-6 - F-8
   
Consolidated Statements of Cash Flow F-9
   
Notes to the Consolidated Financial Statements F-10 - F-37

 

  F- 2  

 

  

Report of Independent Registered Public Accounting Firm

  

To the Shareholders and Board of Directors

Nano Dimension Ltd.

 

Opinion on the Consolidated Financial Statements

 

We have audited the accompanying consolidated statements of financial position of Nano Dimension Ltd and subsidiaries (the “Company”) as of December 31, 2017 and 2016, the related consolidated statements of profit or loss and other comprehensive income, changes in equity, and cash flows for each of the years in the three-year period ended December 31, 2017, and the related notes (collectively, the “consolidated financial statements”). In our opinion, the consolidated financial statements present fairly, in all material respects, the financial position of the Company as of December 31, 2017 and 2016, and the results of its operations and its cash flows for each of the years in the three-year period ended December 31, 2017, in conformity with International Financial Reporting Standards as issued by the International Accounting Standards Board.

 

Basis for Opinion

 

These consolidated financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on these consolidated financial statements based on our audits. We are a public accounting firm registered with the Public Company Accounting Oversight Board (United States) (PCAOB) and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

 

We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the consolidated financial statements are free of material misstatement, whether due to error or fraud. The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. As part of our audits, we are required to obtain an understanding of internal control over financial reporting but not for the purpose of expressing an opinion on the effectiveness of the Company’s internal control over financial reporting. Accordingly, we express no such opinion.

 

Our audits included performing procedures to assess the risks of material misstatement of the consolidated financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the consolidated financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the consolidated financial statements. We believe that our audits provide a reasonable basis for our opinion.

 

/s/ Somekh Chaikin
Certified Public Accountants (Isr.)
Member firm of KPMG International

 

We have served as the Company’s auditor since 2015.

 

Tel-Aviv, Israel
March 14, 2018

 

  F- 3  

 

  

Nano Dimension Ltd.

Consolidated Statements of Financial Position as at

 

        December 31,     Convenience translation into US dollars
(Note 2.T) December 31,
 
    Note   2016     2017     2017  
        Thousand
NIS
    Thousand
NIS
    Thousand
USD
 
                       
Assets                      
Cash   3.A     47,599       21,159       6,103  
Restricted deposits   3.B     500       369       107  
Trade receivables   4.A     149       325       94  
Other receivables   4.B     2,979       2,024       583  
Inventory   5     -       8,097       2,336  
Total current assets         51,227       31,974       9,223  
                             
Restricted deposits   3.B     425       1,201       346  
Property plant and equipment, net   6     7,712       17,930       5,172  
Intangible assets   7     26,095       23,419       6,755  
Total non-current assets         34,232       42,550       12,273  
Total assets         85,459       74,524       21,496  
                             
Liabilities                            
Trade payables         2,612       1,775       512  
Other payables   8     4,954       5,836       1,683  
Total current liabilities         7,566       7,611       2,195  
                             
Liability in respect of government grants   9     2,420       2,886       833  
Other long-term liabilities   10     1,255       1,045       302  
Total non-current liabilities         3,675       3,931       1,135  
Total liabilities         11,241       11,542       3,330  
                             
Equity                            
Share capital   12     5,446       6,682       1,927  
Share premium         118,820       169,325       48,839  
Treasury shares         (5,260 )     (5,260 )     (1,517 )
Warrants         4,375       203       59  
Capital reserve from transactions with controlling shareholders         1,866       1,866       538  
Capital reserve for share-based payments         19,575       23,775       6,857  
Accumulated loss         (70,604 )     (133,609 )     (38,537 )
Total equity         74,218       62,982       18,166  
Total liabilities and equity         85,459       74,524       21,496  

 

The accompanying notes are an integral part of these consolidated financial statements.

 

  F- 4  

 

 

Nano Dimension Ltd.

Consolidated Statements of Profit or Loss and Other Comprehensive Income  

 

        For the Year Ended
December 31,
  Convenience translation into US dollars (Note 2.T) Year ended December 31,
    Note   2015   2016   2017   2017
        Thousand
NIS
  Thousand
NIS
  Thousand
NIS
  Thousand
USD
                     
Revenues   13     -       175       2,984       861  
                                     
Cost of revenues   14     -       72       1,471       424  
                                     
Cost of revenues - amortization of intangible   7     -       668       2,676       772  
                                     
Total cost of revenues         -       740       4,147       1,196  
                                     
Gross loss         -       (565 )     (1,163 )     (335 )
                                     
Research and development expenses, net   15.A     11,089 (*)     15,525 (*)     38,947       11,233  
                                     
Sales and marketing expenses   15.B     1,916 (*)     3,864 (*)     7,859       2,267  
                                     
General and administrative expenses   15.C     9,371 (*)     14,660 (*)     12,101       3,491  
                                     
Operating loss         (22,376 )     (34,614 )     (60,070 )     (17,326 )
                                     
Finance income   15.D     1,529       695       366       105  
                                     
Finance expense   15.D     145       551       3,301       952  
                                     
Total comprehensive loss         (20,992 )     (34,470 )     (63,005 )     (18,173 )
                                     
Basic and diluted loss per share (in NIS or USD)   17     (0.78 )     (0.85 )     (1.11 )     (0.32 )

  

*Reclassified- see note 1.D.

 

The accompanying notes are an integral part of these consolidated financial statements.

 

  F- 5  

 

 

Nano Dimension Ltd.

Consolidated Statements of Changes in Equity

 

    Share
capital
    Share
premium
    Treasury
shares
    Warrants     Capital reserve
from transactions with controlling shareholders
    Capital reserve for share-
based
payments
    Accumulated loss     Total
equity
 
    Thousand
NIS
    Thousand
NIS
    Thousand
NIS
    Thousand
NIS
    Thousand
NIS
    Thousand
NIS
    Thousand
NIS
    Thousand
NIS
 
For the year ended December 31, 2017:                                                
Balance as of January 1, 2017     5,446       118,820       (5,260 )     4,375       1,866       19,575       (70,604 )     74,218  
Loss for the year     -       -       -       -       -       -       (63,005 )     (63,005 )
Issuance of Ordinary Shares, net     1,154       43,073       -       -       -       -       -       44,227  
Exercise of warrants and options     69       2,487       -       (11 )     -       (1,441 )     -       1,104  
Forfeiture of warrants and options
    -       4,422       -       (4,161 )     -       (261 )     -       -  
Share-based payments     13       523       -       -       -       5,902       -       6,438  
                                      -                          
Balance as of December 31, 2017     6,682       169,325       (5,260 )     203       1,866       23,775       (133,609 )     62,982  
                                                                 
Balance as of December 31, 2017- Convenience translation into US dollars (Note 2.T)- Thousand USD     1,927       48,839       (1,517 )     59       538       6,857       (38,537 )     18,166  

 

The accompanying notes are an integral part of these consolidated financial statements.

 

  F- 6  

 

 

Nano Dimension Ltd.

Consolidated Statements of Changes in Equity (Continued)

 

    Share
capital
    Share
premium
    Treasury
shares
    Warrants     Capital reserve from transactions with controlling shareholders     Capital reserve for share-
based
payments
    Accumulated loss     Total equity  
    Thousand
NIS
    Thousand
NIS
    Thousand
NIS
    Thousand
NIS
    Thousand
NIS
    Thousand
NIS
    Thousand
NIS
    Thousand
NIS
 
For the year ended December 31, 2016:                                                
Balance as of January 1, 2016     3,863       63,054       (5,260 )     6,934       1,866       12,681       (36,134 )     47,004  
Loss for the year     -       -       -       -       -       -       (34,470 )     (34,470 )
Issuance of Ordinary Shares and warrants, net     1,063       45,287       -       -       -       -       -       46,350  
Exercise of warrants and options     520       10,479       -       (2,559 )     -       (2,788 )     -       5,652  
Share-based payments     -       -       -       -       -       9,682       -       9,682  
                                                                 
Balance as of December 31, 2016     5,446       118,820       (5,260 )     4,375       1,866       19,575       (70,604 )     74,218  

 

The accompanying notes are an integral part of these consolidated financial statements.

 

  F- 7  

 

  

Nano Dimension Ltd.

Consolidated Statements of Changes in Equity (Continued)

 

    Share
capital
    Share
premium
    Treasury
shares
    Warrants     Capital reserve from transactions with controlling shareholders     Capital reserve for share-
based
payments
    Accumulated loss     Total equity  
    Thousand
NIS
    Thousand
NIS
    Thousand
NIS
    Thousand
NIS
    Thousand
NIS
    Thousand
NIS
    Thousand
NIS
    Thousand
NIS
 
For the year ended December 31, 2015:                                                
Balance as of January 1, 2015     2,337       14,334       (5,260 )     2,466       1,866       62       (15,142 )     663  
Loss for the year     -       -       -       -       -       -       (20,992 )     (20,992 )
Issuance of Ordinary Shares and warrants, net     1,498       48,054       -       4,532       -       -       -       54,084  
Exercise of warrants and options     28       666       -       (64 )     -       (109 )     -       521  
Share-based payments     -       -       -       -       -       12,728       -       12,728  
                                                                 
Balance as of December 31, 2015     3,863       63,054       (5,260 )     6,934       1,866       12,681       (36,134 )     47,004  

 

The accompanying notes are an integral part of these consolidated financial statements.

 

  F- 8  

 

 

Nano Dimension Ltd.

Consolidated Statements of Cash Flows

 

    For the Year Ended
December 31,
    Convenience translation into US dollars (Note 2.T) Year ended December 31,  
    2015     2016     2017     2017  
    Thousand
NIS
    Thousand
NIS
    Thousand
NIS
    Thousand USD  
Cash flow from operating activities:                        
Net loss     (20,992 )     (34,470 )     (63,005 )     (18,173 )
Adjustments:                                
Depreciation and amortization     141       1,400       4,718       1,361  
Revaluation of controlling shareholders loans     25       -       -       -  
Revaluation of liability in respect of government grants     77       438       (366 )     (105 )
Revaluation of derivative instruments     (1,434 )     -       -       -  
Financing expenses (income)     292       (543 )     3,196       922  
Loss from disposal and sale of fixed assets     206       572       289       84  
Share-based payments     7,440       7,785       6,316       1,821  
      6,747       9,652       14,153       4,083  
Changes in assets and liabilities:                                
Increase in inventory     -       -       (8,027 )     (2,315 )
Decrease (increase) in other receivables     (423 )     (1,887 )     723       209  
Increase in trade receivables     -       (149 )     (176 )     (51 )
Increase in other payables     610       2,385       353       102  
Increase (decrease) in trade payables     1,069       268       (693 )     (201 )
Increase (decrease) in other long term liabilities     -       1,464       (214 )     (62 )
      1,256       2,081       (8,034 )     (2,318 )
Net cash used in operating activities     (12,989 )     (22,737 )     (56,886 )     (16,408 )
                                 
Cash flow from investing activities:                                
Increase in restricted bank deposits     (928 )     -       (645 )     (186 )
Development expenditure capitalized as intangible assets     (5,819 )     (13,156 )     -       -  
Acquisition of property plant and equipment     (3,331 )     (4,340 )     (12,649 )     (3,648 )
Proceeds from sale of fixed assets     -       -       8       2  
Net cash used in investing activities     (10,078 )     (17,496 )     (13,286 )     (3,832 )
                                 
Cash flow from financing activities:                                
Proceeds from issuance of Ordinary Shares and warrants, net     55,518       46,350       44,227       12,757  
Exercise of warrants and options     521       5,652       1,104       318  
Amounts recognized in respect of government grants liability, net     500       1,473       1,597       461  
Payment of controlling shareholder loans     (175 )     -       -       -  
Net cash provided by financing activities     56,364       53,475       46,928       13,536  
Increase (decrease) in cash     33,297       13,242       (23,244 )     (6,704 )
Cash at beginning of the year     806       33,811       47,599       13,729  
Effect of exchange rate fluctuations on cash     (292 )     546       (3,196 )     (922 )
Cash at end of year     33,811       47,599       21,159       6,103  
                                 
Non-cash transactions:                                
Property plant and equipment acquired on credit     396       1,013       869       251  

 

The accompanying notes are an integral part of these consolidated financial statements. 

 

  F- 9  

 

 

Nano Dimension Ltd.

Notes to the Consolidated Financial Statements

 

Note 1 General

 

A. Reporting Entity

 

Nano Dimension Ltd. (the “Company”) is an Israeli resident company incorporated in Israel. The address of the Company’s registered office is 2 Ilan Ramon St., Ness Ziona, Israel. The consolidated financial statements of the Company as of December 31, 2017, comprise the Company and its subsidiaries in Israel and in the United States (together referred to as the “Group”). The Company engages, by means of the subsidiary Nano Dimension Technologies Ltd. (“Nano–Technologies”), in the development of a three-dimensional (“3D”) printer and nanotechnology based conductive and dielectric inks, which are supplementary products to the 3D printer. The Ordinary Shares of the Company are registered for trade on the Tel Aviv Stock Exchange. In addition, since March 2016, the Company’s American Depositary Shares (“ADSs”) have been trading on the Nasdaq Capital Market.

 

B. Since August 25, 2014, the Company has devoted substantially all of its financial resources to develop its products and has financed its operations primarily through the issuance of equity securities. The amount of the Company’s future net losses and the Company's ability to finance its operations will depend, in part, on completing the development of its products, the rate of its future expenditures, its ability to generate significant revenues from the sale of its products, and its ability to obtain funding through the issuance of securities, strategic collaborations or grants. To date, the Group has just begun to commercialize its products and has generated insignificant revenues, mainly from sales and operating leases of its 3D printers. The Group’s ability to generate revenue and achieve profitability depends on its ability to successfully commercialize its products. The Group was able to obtain funding thus far and believes it has sufficient resources to fund its operations at least in the next 12 months.

 

C. Definitions

 

In these financial statements –

The Group – the Company, Nano –Technologies and Nano Dimension USA Inc., a fully owned US subsidiary of Nano Dimension Ltd.

Related Party – Within its meaning in International Accounting Standards (“IAS”) 24 (2009) Related Party Disclosures .

 

The Operating Cycle

 

The operating cycle period of the Group is 12 months.

 

D. Reclassification

 

During the current year the Group changed the income statement classification and added a sales and marketing expenses section to reflect more appropriately the operation activities of the Group.

 

Comparative amounts were reclassified for consistency. This classification did not have any effect on the total comprehensive loss.

 

  F- 10  

 

 

Nano Dimension Ltd.

Notes to the Consolidated Financial Statements

 

Note 2 Summary of Significant Accounting Policies

 

The accounting policies of the Group set out below have been applied consistently for all periods presented in these consolidated financial statements, and have been applied consistently by Group entities. 

 

A. Basis for presentation of the financial statements

 

The Group’s financial statements as of December 31, 2017, and December 31, 2016 and for each of the three years in the period ended on December 31, 2017, comply with IFRS as issued by the International Accounting Standards Board (“IASB”).

 

The financial statements have been prepared under the historical cost convention.

 

The consolidated financial statements were authorized for issuance by the Company’s Board of Directors on March 14, 2018.

 

B. Changes in accounting policies

 

The Company early adopted International Financial Reporting Standard 15, Revenue from Contracts with Customers ("IFRS 15"), which provides new guidance on revenue recognition as from January 1, 2017 on a retrospective basis. See also Note 2.L below relating to revenue recognition.

 

C. Use of estimates and judgments

 

The preparation of financial statements in conformity with IFRS as issued by the IASB requires management to make judgments, estimates and assumptions that affect the application of accounting policies and the reported amounts of assets, liabilities, income and expenses. Actual results may differ from these estimates.

 

The preparation of accounting estimates used in the preparation of the Group’s financial statements requires management of the Company to make assumptions regarding circumstances and events that involve considerable uncertainty. Management of the Company prepares the estimates on the basis of past experiences, various facts, external circumstances, and reasonable assumptions according to the pertinent circumstances of each estimate. Estimates and underlying assumptions are reviewed on an ongoing basis. Revisions to accounting estimates are recognized in the period in which the estimates are revised and in any future periods affected.

 

  F- 11  

 

 

Nano Dimension Ltd.

Notes to the Consolidated Financial Statements

 

Note 2 Summary of Significant Accounting Policies (Continued) 

 

C. Use of estimates and judgments (Continued)

 

Below is information about significant assumptions made by the Group with respect to estimates and judgments:

 

  - Intangible assets

Development expenses in the period until August 1, 2015 were expensed as incurred. On August 1, 2015, the Group met all the required conditions to recognize intangible assets in accordance with IAS 38 Intangible Assets and started recognizing intangible assets arising from internal development. The capitalization is the outcome of meeting all the criteria in IAS 38, which are (i) development costs that can be measured reliably, (ii) the product or process is technically and commercially feasible, (iii) future economic benefits are probable, and (iv) the Group has the intention and sufficient resources to complete development and to use or sell the asset. In the fourth quarter of 2016, the Company ceased to capitalize development cost and began to amortize its intangible assets. The estimated useful lives of the capitalized development expenses for the current period is 10 years. See also Note 2.M and 2.N regarding research and development and amortization of intangible assets.

 

  - Share-based payments

Estimating fair value for share-based payment transactions requires determination of the most appropriate valuation model, which depends on the terms and conditions of the grant. This estimate also requires determination of the most appropriate inputs to the valuation model, including the expected life of the share option and volatility and making assumptions about them. For the measurement of the fair value of equity-settled transactions at the grant date, the Group uses a binomial model. See also note 2.P and note 18. 

 

  - Liability in respect of government grants

See note 9 regarding the discount rate that was used in evaluating the liability in respect of government grants.

 

  - Operating lease- Group as lessor

The Group has entered into leases of its 3D printers. The Group has determined, based on an evaluation of the terms and conditions of the agreements, such as the lease term not constituting a major part of the economic life of the printer and the present value of the minimum lease payments not amounting to substantially all of the fair value of the printer, that it retains all the significant risks and rewards of ownership of these properties and accounts for the contracts as operating leases.

  

  - Revenue recognition

Effective January 1, 2017, the Company early adopted IFRS 15, Revenue from Contracts with Customers, which provides new guidance on revenue recognition on a retrospective basis. The Company determines the appropriate revenue recognition for its contracts with customers by analyzing the type, terms and conditions of each contract or arrangement with a customer. As a part of the analysis, management is required to make judgments relating to whether an arrangement or contract is legally enforceable, and whether the arrangement include separate performance obligations. In addition, estimates are required in order to allocate the total transaction price to each performance obligation based on the estimated relative standalone selling prices of the promised goods or services underlying each performance obligation. 

 

D. Subsidiary

 

A subsidiary is an entity controlled by the Company. The Company controls an entity when it is exposed to, or has rights to, variable returns from its involvement with the entity and has the ability to affect those returns through its power over the entity. The financial statements of the subsidiaries are included in the consolidated financial statements from the date that control commences until the date that control is lost. The accounting policies of the subsidiaries are aligned with the policies adopted by the Group.

 

E. Functional currency and presentation currency

 

(1) Functional currency and presentation currency

 

These financial statements are presented in New Israeli Shekels (“NIS”), which is the Group’s functional currency. The figures in the tables are rounded to the nearest one thousand, unless otherwise noted. The NIS is the currency that represents the principal economic environment in which the Group operates.

 

  F- 12  

 

 

Nano Dimension Ltd.

Notes to the Consolidated Financial Statements

 

Note 2 Summary of Significant Accounting Policies (Continued) 

 

E. Functional currency and presentation currency (Continued)

 

  (2) Foreign currency transactions

 

Transactions in foreign currencies (currency other than the NIS) are translated to the functional currency of the Group at exchange rates at the dates of the transactions. Monetary assets and liabilities denominated in foreign currencies at the reporting date are translated to the functional currency at the exchange rate at that date. The foreign currency gain or loss on monetary items is the difference between amortized cost in the functional currency at the beginning of the year, adjusted for effective interest and payments during the year, and the amortized cost in foreign currency translated at the exchange rate at the end of the year.

 

Non-monetary items that are measured in terms of historical cost in a foreign currency are translated using the exchange rate at the date of the transaction.

 

Foreign currency differences arising on translation are recognized in profit or loss.

 

  (3) Index linked financial items

 

Financial assets and liabilities which according to their terms are linked to changes in the Israeli Consumer Price Index (the “Index”) are adjusted according to the relevant Index on every reporting date in accordance with the terms of the agreement. Linkage differences deriving from said adjustment are recorded to profit and loss.

 

  (4) Below are details regarding the Index and the exchange rate of the U.S. dollar (“Dollar” or “$”):

 

      Consumer Price Index     Dollar  
               
  December 31, 2017     100.4       3.467  
  December 31, 2016     100.878       3.845  
  December 31, 2015     101.184       3.902  
  Change in percentages:                
  Year ended December 31, 2017     (0.47 )     (9.83 )
  Year ended December 31, 2016     (0.3 )     (1.46 )
  Year ended December 31, 2015     (0.9 )     0.33  

 

F. Financial instruments

 

  (1) Non-derivative Financial assets

 

Initial recognition of financial assets

 

The Group initially recognizes loans and receivables and deposits on the date that they are created. Non-derivative financial instruments are comprised of trade and other receivables, cash and deposits.

 

Loans and receivables

 

Loans and receivables are non-derivative financial assets with fixed or determinable payments that are not quoted in an active market. Such assets are recognized initially at their fair value plus any directly attributable transaction costs. Subsequent to initial recognition, loans and receivables are measured at amortized cost using the effective interest method, minus any impairment losses.

 

Loans and receivables comprise cash and cash deposits and trade and other receivables.

 

  F- 13  

 

 

Nano Dimension Ltd.

Notes to the Consolidated Financial Statements

 

Note 2 Summary of Significant Accounting Policies (Continued)

 

F. Financial instruments (Continued)

 

Cash

 

Cash include cash balances available for immediate use.

 

Deposits include short-term deposits with banking corporation (with original maturities of three months or less) that are readily convertible into known amounts of cash and are exposed to insignificant risks of change in value.

 

  (2) Non derivative Financial Liabilities

 

Non-derivative financial liabilities include trade and other payables.

 

Initial recognition of financial liabilities

 

The Group initially recognizes financial liabilities on the trade date at which the Group becomes a party to the contractual provisions of the instrument.

 

Financial liabilities are recognized initially at their fair value, plus any directly attributable transaction costs. Subsequent to initial recognition, these financial liabilities are measured, at amortized cost, using the effective interest method.

 

Transaction costs directly attributable to an expected issuance of an instrument that will be classified as a financial liability are recognized as an asset in the framework of deferred expenses in the statement of financial position. These transaction costs are deducted from the financial liability upon its initial recognition, or are amortized as financing expenses in the statement of “Profit or Loss and Other Comprehensive Income” when the issuance is no longer expected to occur.

 

Derecognition of financial liabilities

 

Financial liabilities are derecognized when the obligation of the Group, as specified in the agreement, expires or when it is discharged or cancelled. 

 

  (3) Determination of fair value

 

Preparation of the financial statements requires the Group to determine the fair value of certain assets and liabilities.

 

When determining the fair value of an asset or liability, the Group uses observable market data as much as possible. There are three levels of fair value measurements in the fair value hierarchy that are based on the data used in the measurement, as follows:

 

  Level 1: quoted prices (unadjusted) in active markets for identical assets or liabilities.
     
  Level 2: inputs other than quoted prices included within Level 1 that are observable, either directly or indirectly.
     
  Level 3: inputs that are not based on observable market data (unobservable inputs).

 

Further information about fair value is included in Note 19.E on financial instruments.

 

  F- 14  

 

 

Nano Dimension Ltd.

Notes to the Consolidated Financial Statements

 

Note 2 Summary of Significant Accounting Policies (Continued)

 

G. Property plant and equipment

 

Property plant and equipment are presented according to cost, including directly attributed acquisition costs, minus accumulated depreciation and losses from accrued decrease in value. Improvements and upgrades are included in the assets’ costs whereas maintenance and repair costs are recognized in profit and loss as accrued. 

 

The cost of printers used for internal purposes, which are classified as property, plant and equipment, includes the cost of materials and direct labor, any other costs directly attributable to bringing the assets to a working condition for their intended use.

 

The depreciation is calculated in equal yearly rates during the period of the useful life span of the assets, as follows:

 

      %  
         
  Machinery and equipment (mainly 7%)    

7 – 50

 
  Computers     20 - 33  
  Office furniture and equipment     7 - 15  
  Leasehold Improvements     7 - 10  
  Printers leased to clients- See note 2.L.     25  

 

Amortization methods, useful lives and residual values are reviewed at the end of each reporting year and adjusted if appropriate.

 

H. Inventory

 

Inventories are measured at the lower of cost and net realizable value. The cost of inventories is based on the first-in first-out principle, and includes expenditure incurred in acquiring the inventories and the costs incurred in bringing them to their existing location and condition. In the case of manufactured inventories and work in progress, cost includes an appropriate share of production overheads based on normal operating capacity. Net realizable value is the estimated selling price in the ordinary course of business, less the estimated costs of completion and selling expenses.

 

I. Impairment of non-financial assets

 

The carrying amounts of the Group’s non-financial assets are reviewed at each reporting date to determine whether there is any indication of impairment. If any such indication exists, then the asset’s recoverable amount is estimated.

 

The recoverable amount of an asset is the greater of its value in use and its fair value, minus the costs of disposal. In assessing value in use, the estimated future cash flows are discounted to their present value using a pre-tax discount rate that reflects the assessments of market participants regarding the time value of money and the risks specific to the asset, for which the estimated future cash flows from the asset were not adjusted.

 

An impairment loss is recognized if the carrying amount of an asset exceeds its estimated recoverable amount. Impairment losses are recognized in profit or loss.

 

J. Provisions

 

A provision for claims is recognized if, as a result of a past event, the Group has a present legal or constructive obligation that can be estimated reliably and it is probable that an outflow of economic benefits will be required to settle the obligation. When the value of time is material, the provision is measured at its present value.

 

K. Treasury shares

 

When share capital recognized as equity is repurchased by the Group, the amount of the consideration paid, which includes directly attributable costs, net of any tax effects, is recognized as a deduction from equity. Repurchased shares are classified as treasury shares. When treasury shares are sold or reissued subsequently, the amount received is recognized as an increase in equity, and the resulting surplus on the transaction is carried to share premium, whereas a deficit on the transaction is deducted from retained earnings.

 

Ordinary shares

 

Ordinary shares are classified as equity. Incremental costs directly attributable to the issuance of ordinary shares and share options are recognized as a deduction from equity, net of any tax effects .

 

  F- 15  

 

 

Nano Dimension Ltd.

Notes to the Consolidated Financial Statements

 

Note 2 Summary of Significant Accounting Policies (Continued)

 

L. Revenue recognition

 

The Company decided to early adopt IFRS 15, which provides new guidance on revenue recognition, on a retrospective basis.

 

Based on the examination of the guidance of the standard, no adjustments have been required to be made to the revenue previously recognized, as in 2016 the Company's main revenues were from printer lease transactions accounted for under IAS 17. Accordingly, comparative figures have not been restated to reflect the impact of the retrospective implementation of the standard.

 

The Company recognizes revenue when the customer obtains control over the promised goods or services. The revenue is measured according to the amount of the consideration to which the Company expects to be entitled in exchange for the goods or services promised to the customer, other than amounts collected for third parties.

 

On the contract’s inception date the Company assesses the goods or services promised in the contract with the customer and identifies as a performance obligation any promise to transfer to the customer goods or services (or a bundle of goods or services) that are distinct.

 

The Company identifies goods or services promised to the customer as being distinct when the customer can benefit from the goods or services on their own or in conjunction with other readily available resources and the Company’s promise to transfer the goods or services to the customer is separately identifiable from other promises in the contract.

 

The Company's identified performance obligations includes: printer, ink, maintenance (which is generally provided for a period of up to one year), training and installation (unless sold to one of the Company's authorized resellers). The Company allocates the transaction price to the identified performance obligations based on the relative estimated standalone selling price of such goods and services.

 

Revenues allocated to the printers and ink is recognized when the control is passed at a point in time. Currently, the Company also sells its printers through resellers. The Company recognizes revenue to distributors at the time of sale to the distributors, assuming the Company has completed its obligations related to the sale.

 

Maintenance revenue is recognized ratably, on a straight-line basis, over the period of the services. Revenue from training and installation is recognized during the time of performance.

 

Revenues from leases transactions are recognized on a straight line basis over the term of the lease.

 

  F- 16  

 

 

Nano Dimension Ltd.

Notes to the Consolidated Financial Statements

 

Note 2 Summary of Significant Accounting Policies (Continued)

 

M. Research and development and Intangible assets

 

Expenditure on research activities, undertaken with the prospect of gaining new scientific or technical knowledge and understanding, is recognized in profit or loss when incurred.

 

Development activities involve a plan or design for the production of new or substantially improved products and processes. Development expenditure is capitalized only if development costs can be measured reliably, the product or process is technically and commercially feasible, future economic benefits are probable, and the Group has the intention and sufficient resources to complete development and to use or sell the asset.

 

The expenditure capitalized in respect of development activities includes the cost of materials, direct labor and overhead costs that are directly attributable to preparing the asset for its intended use. During 2016, the Group capitalized development expenses with regard to the internal development of its products in an amount of NIS 15,408,000 (in 2015: NIS 11,355,000). Other research and development expenditures are recognized in profit or loss as incurred.

 

In the fourth quarter of 2016 the Group ceased to capitalize development expenses and began to amortize the intangible asset arising from capitalization of development expenses, upon the initiation of its beta program. In subsequent periods, capitalized development expenditure is measured at cost minus accumulated amortization and accumulated impairment losses.

 

N. Amortization

 

Amortization is a systematic allocation of the amortizable amount of an intangible asset over its useful life. The amortizable amount is the cost of the asset, minus its residual value.

 

Amortization is recognized in profit or loss on a straight-line basis, over the estimated useful lives of the intangible assets from the date they are available for use, since these methods most closely reflect the expected pattern of consumption of the future economic benefits embodied in each asset.

 

The estimated useful lives of the capitalized development costs has been determined by the Company’s management as 10 years.

 

Amortization methods, useful lives and residual values are reviewed at the end of each reporting year and adjusted if appropriate.

 

  F- 17  

 

 

Nano Dimension Ltd.

Notes to the Consolidated Financial Statements

 

Note 2 Summary of Significant Accounting Policies (Continued)

 

O. Government grants

 

Government grants are recognized initially at fair value when there is reasonable assurance that they will be received and the Group will comply with the conditions associated with the grant.

 

Grants from the Israeli Innovation Authority (the “Innovation Authority”), previously the Israeli Office of the Chief Scientist of the Ministry of Economy (the “OCS”), with respect to research and development projects, are accounted for as forgivable loans according to IAS 20 Accounting for Government Grants and Disclosure of Government Assistance . Grants received from the Innovation Authorityare recognized as a liability according to their fair value on the date of their receipt, unless it is reasonably certain, on that date, that the amount received will not be refunded. The amount of the liability is reexamined each period, and any changes in the present value of the cash flows discounted at the original interest rate of the grant are recognized in profit or loss. The difference between the amount received and the fair value on the date of receiving the grant is recognized as a deduction of research and development expenses. Expenses related to revaluation of the liability in respect of government grants were recognized in the statements of profit or loss and other comprehensive income as finance expenses.

 

P. Share-based payment transactions

 

The grant date fair value of share-based payment awards granted to employees is recognized as salary costs, with a corresponding increase in equity, over the period that the employees become unconditionally entitled to the awards.

 

Q. Employee benefits

 

The Group’s liability for severance pay for its employees is calculated pursuant to Israeli Severance Pay Law (1963) (the “Severance Pay Law”). The Group’s liability is covered by monthly deposits with severance pay funds and insurance policies. For all of the Group’s employees, the payments to pension funds and to insurance companies exempt the Group from any obligation towards its employees, in accordance with Section 14 of the Severance Pay Law, which is accounted for as a defined contribution plan (as defined below). Accumulated amounts in pension funds and in insurance companies are not under the Group’s control or management and, accordingly, neither those amounts nor the corresponding accrual for severance pay are presented in the consolidated statements of financial position.

 

A defined contribution plan is a post-employment benefit plan under which an entity pays fixed contributions into a separate entity and has no legal or constructive obligation to pay further amounts. Obligations for contributions to defined contribution pension plans are recognized as an expense in profit or loss in the periods during which related services are rendered by employees.

 

  F- 18  

 

 

Nano Dimension Ltd.

Notes to the Consolidated Financial Statements

 

Note 2 Summary of Significant Accounting Policies (Continued)

 

R. Loss per share

 

The Group presents basic and diluted loss per share for its Ordinary Shares. Basic loss per share is calculated by dividing the loss attributable to holders of Ordinary Shares of the Company by the weighted average number of Ordinary Shares outstanding during the year, adjusted for treasury shares. Diluted loss per share is determined by adjusting the loss attributable to holders of Ordinary Shares of the Company and the weighted average number of Ordinary Shares outstanding, after adjustment for treasury shares, for the effects of all dilutive potential Ordinary Shares, which comprise share options and share options granted to employees.  

 

S . New standards and interpretations not yet adopted

 

  (1) IFRS 9 (2014) – Financial Instruments

 

IFRS 9 (2014) replaces the current guidance in IAS 39, Financial Instruments: Recognition and Measurement . IFRS 9 (2014) includes revised guidance on the classification and measurement of financial instruments, a new ‘expected credit loss’ model for calculating impairment for most financial assets, and new guidance and requirements with respect to hedge accounting. IFRS 9 (2014) is effective for annual periods beginning on or after January 1, 2018. The Group has examined the effects of applying IFRS 9 (2014), and in its opinion the effect on the financial statements will be immaterial.  

 

  (2) IFRS 16 – Leases

 

IFRS 16 replaces IAS 17, Leases and its related interpretations. For lessees, the standard presents a unified model for the accounting treatment of all leases according to which the lessee has to recognize an asset and liability in respect of the lease in its financial statements. IFRS 16 is applicable for annual periods as of January 1, 2019, with the possibility of early adoption, so long as the company has also early adopted IFRS 15, Revenue from Contracts with Customers. The Group has not yet commenced examining the effects of adopting IFRS 16 on the financial statements.

 

T . Convenience translation into U.S. dollars

 

For the convenience of the reader, the reported NIS figures as of December 31, 2017 and for the year then ended, have been presented in dollars, translated at the representative rate of exchange as of December 31, 2017 (NIS 3.467 = $1.00). The dollar amounts presented in these financial statements should not be construed as representing amounts that are receivable or payable in dollars or convertible into dollars, unless otherwise indicated.

 

  F- 19  

 

 

Nano Dimension Ltd.

Notes to the Consolidated Financial Statements

 

  Note 3.A Cash

 

      December 31,  
      2016     2017  
      Thousand NIS     Thousand NIS  
               
  Bank accounts- dominated in NIS     3,501       823  
 

Bank accounts- other (mainly USD)

    44,098       20,336  
        47,599       21,159  

 

Note 3.B Restricted deposits

 

1. The Group has restricted deposits for its credit cards in an amount of NIS 369,000. The deposits are not linked and bear an annual interest rate of 0.01%-0.05%.

 

2. The Group has a restricted deposit in the amount of NIS 1,201,000 for the lease of its offices and labs. The deposit is not linked and bears an annual interest rate of 0.01%. The Group expect to lease its offices and labs for a period of more than a year, thus the restricted deposit was classified as a non-current asset.

 

Note 4.A Trade receivables

 

      December 31,  
      2016     2017  
      Thousand NIS     Thousand NIS  
               
  Open balances     149       282  
  Income receivables     -       43  
        149       325  

 

Note 4.B Other receivables

 

      December 31,  
      2016     2017  
      Thousand NIS     Thousand NIS  
               
  Government authorities     1,289        1,197  
  Prepaid expenses     1,369       791  
  Receivables in respect of government grants     232       -  
  Others     89       36  
        2,979       2,024  

 

  F- 20  

 

 

Nano Dimension Ltd.

Notes to the Consolidated Financial Statements

 

Note 5 Inventory

 

        December 31,  
      2016     2017  
      Thousand NIS     Thousand NIS  
               
  Raw and auxiliary materials, and consumables     -        5,499  
  Work in progress         -       1,009  
  Finished goods     -       1,589  
        -       8,097  

 

Note 6 Property plant and equipment, net

 

    Machinery and equipment     Computers     Office furniture and equipment     Leasehold improvements     Printers leased to clients     Raw Materials (*)     Total  
    Thousand NIS     Thousand NIS     Thousand NIS     Thousand NIS     Thousand NIS     Thousand NIS     Thousand NIS  
Cost                                          
As of January 1, 2016     2,898       741       148       886       -       -       4,673  
Additions     1,384       473       320       45       1,328       1,480       5,030  
Disposals     (1,085 )     -       -       -       -               (1,085 )
As of December 31, 2016     3,197       1,214       468       931       1,328       1,480       8,618  
Additions     6,428       243       27       4,879       980       -       12,557  
Reclassification     2,426       -       50       -       (996 )     (1,480 )     -  
Disposals     (169 )     (14 )     (21 )     -       (270 )     -       (474 )
As of December 31, 2017     11,882       1,443       524       5,810       1,042       -       20,701  
                                                         
Depreciation accrued                                                        
As of January 1, 2016     117       119       13       10       -       -       259  
Additions     266       328       21       68       49       -       732  
Disposals     (85 )     -       -       -       -       -       (85 )
As of December 31, 2016     298       447       34       78       49       -       906  
Additions     1,088       449       47       187       271       -       2,042  
Reclassification     34       2       3       -       (39 )             -  
Disposals     (20 )     (10 )     (5 )     -       (142 )     -       (177 )
As of December 31, 2017     1,400       888       79       265       139       -       2,771  
                                                         
Carrying amount                                                        
As of December 31, 2017     10,482       555       445       5,545       903       -       17,930  
As of December 31, 2016     2,899       767       434       853       1,279       1,480       7,712  

 

(*) During the year ended December 31, 2016, the Group acquired raw materials for the building of its 3D printers, with the intention of leasing those printers to clients as a part of the Company’s beta plan. In 2017 the Company utilized the raw materials.

 

During the year ended December 31, 2017, the Group acquired property plant and equipment on credit in the amount of NIS 869,000 (During the year ended December 31, 2016: NIS 1,013,000).

 

During the year ended in December 31, 2016, the Group recognized an amount of NIS 1,328,000 as property plant and equipment in respect to printers that it leases to its clients. This amount include an amount of NIS 852,000 that was previously capitalized as an intangible asset.

 

  F- 21  

 

 

Nano Dimension Ltd.

Notes to the Consolidated Financial Statements

 

Note 7 Intangible assets

 

Intangible assets include development expenses that were capitalized. The expenditure capitalized in respect of development activities includes the cost of materials, direct labor and overhead costs that are directly attributable to preparing the asset for its intended use. See also note 2.M.

 

      December 31,  
      2016     2017  
      Thousand NIS     Thousand NIS  
               
  Balance as of January 1     11,355       26,095  
  Capitalization of development expenses     15,408       -  
  Amortization     (668)       (2,676)  
  Balance as of December 31     26,095       23,419  

 

Note 8 Other payables

 

      December 31,  
      2016     2017  
      Thousand NIS     Thousand NIS  
               
  Accrued expenses     881       595  
  Deferred revenue     369       263  
  Current portion of other long-term liability     209       205  
  Employees and related liabilities     1,804       2,329  
  Government authorities     951       1,171  
  Current maturities in respect of government grants     642       1,175  
  Others     98       98  
        4,954       5,836  

 

Note 9 Liability in respect of government grants

 

      2016     2017  
      Thousand NIS     Thousand NIS  
  Balance as of January 1     1,089       3,062  
  Amounts received during the year     2,143       1,984  
  Amounts not yet received     232       -  
  Payment of Royalties     -       (37)  
  Amounts recognized as an offset from research and development expenses     (840 )     (582)  
  Revaluation of the liability     438       (366)  
  Balance as of December 31     3,062       4,061  
                   
  Current maturities in respect of government grants     642       1,175  
                   
  Long term liability in respect of government grants     2,420       2,886  

 

  F- 22  

 

 

Nano Dimension Ltd.

Notes to the Consolidated Financial Statements

 

Note 9 Liability in respect of government grants (Continued)

 

On September 30, 2014, Nano-Technologies received an approval from the Innovation Authority, then the OCS, to finance a development project in a scope of up to NIS 3,700,000, while the Innovation Authority share of financing the aforesaid amount would be up to 50%. In consideration, Nano-Technologies undertook to pay the Innovation Authority royalties in the rate of 3% of the future sales up to the amount of the grants received. On the date on which the grants were received, the Group recognized a liability using a discount rate of 30%,

 

On December 22, 2015, Nano- Technologies received an approval from the Innovation Authority to support its development of a 3D PCB printer. The approved budget is up to NIS 4,400,000, and the contribution by the Innovation Authority to the research and development budget is 50% of expenditures. On the date on which the grants were received, the Group recognized a liability using a discount rate of 19.5%.

 

On February 2017, Nano- Technologies received an approval from the Innovation Authority to support the development of 3D printing of advanced ceramic materials with inkjet technology. The approved budget is up to NIS 1,400,000 million, and the contribution by the Innovation Authority to the research and development budget is 50% of expenditures. On the date on which the grants were received, the Group recognized a liability using a discount rate of 19%.

 

On May 2017, Nano- Technologies received an approval from the Innovation Authority to support its development of a 3D PCB printer. The approved budget is up to NIS 5,221,000 million, and the contribution by the Innovation Authority to the research and development budget is 30% of expenditures. On the date on which the grants were received, the Group recognized a liability using a discount rate of 19%.

 

Note 10 Other Long-term Liabilities

 

Other long-term liabilities represent cash and property, plant and equipment items received in respect of lease of additional office.

 

Note 11 Commitments and contingent liabilities

 

A. Licenses 

 

On September 15, 2014, Nano-Technologies engaged in a licensing agreement with Yissum – Research Development Company of the Hebrew University of Jerusalem, Ltd. (“Yissum”), whereby Nano-Technologies would be granted an exclusive right to use the patents owned by Yissum, to manufacture nano-conductive ink for printing electronic circuits with a unique method. In consideration for the said exclusive usage right, Nano-Technologies would pay Yissum royalties of approximately 3% of the total sales of the conductive ink. The terms of the licensing agreement are for the duration of the patents and patent requests. On April 2, 2015, Nano-Technologies and Yissum entered into an amended and restated agreement pursuant to which the license granted to Nano-Technologies was expanded to include exclusive rights for use of a unique method to produce silver nano-particles for the production of conductive ink for any purpose and any potential market that it defines as a target market. On May 14, 2015, in connection with the entry into the amended and restated agreement, the Company’s board of directors approved a grant of 559,097 non-tradable share options to Yissum, immediately exercisable into 559,097 Ordinary Shares, during a period of five years and in consideration for an exercise price of NIS 2.7 per share. 

 

Following management' reassessment, the cost of the license was impaired and recognized as an expense during the year ended December 31, 2015.

  

  F- 23  

 

 

Nano Dimension Ltd.

Notes to the Consolidated Financial Statements

 

Note 11 Commitments and contingent liabilities (Continued)

 

B. Contingent liabilities

 

On March 19, 2015, a claim was filed seeking damages in the amount of NIS 20,000,000 against the Company, Nano-Technologies, shareholders of the Company, officers and employees of the Group (together, the “Defendants”). The claim was filed by a third party (the “Plaintiff”) alleging that commercial secrets and technology that were developed by the Defendants in the field of 3-D printing were misappropriated, allegedly, through an officer and an additional employee of the Group that were employed by the Plaintiff in the past. In addition, the Plaintiff sought, among others, to order the Defendants, if the claim was accepted, to cease to make use of the allegedly misappropriated know-how and technology, and assign the rights to certain patents and patent applications owned by the Group to the Plaintiff.

 

On March 20, 2017, the Company announced that the Company and the Plaintiff reached a settlement agreement. As a part of the settlement agreement, the parties agreed that the legal proceedings will end, and the lawsuit against the Company will be dismissed, without any material effect on the Company’s activity. On March 19, 2017, the court approved the dismissal of the lawsuit.

 

C. Commitments

 

The Group leases its headquarters, manufacturing and research and development facility and cars under long-term non-cancelable operating leases, certain of which provide for renewal options.

 

Rental fees and maintenance expenses for the year 2017 were approximately NIS 3,563,000 (2016: NIS 1,566,000 and 2015: NIS 957,000). 

 

Future minimum lease payments for all existing long-term, non-cancelable operating leases, as well as purchase orders and other contractual obligations as of December 31, 2017 are as follows:

 

      Thousand NIS  
  2018     5,640  
  2019     905  
  2020     821  
  2021 and thereafter     2,259  
           
  Total     9,625  

 

  F- 24  

 

 

Nano Dimension Ltd.

Notes to the Consolidated Financial Statements

 

Note 12 Equity

 

A. The Company’s share capital (in thousands of Ordinary Shares)

 

      Ordinary Shares  
      2016     2017  
  Issued and paid-up share capital as at December 31     50,143       62,511  
  Authorized share capital     200,000       200,000  

 

B. Transactions with issued and paid up share capital

 

On May 18, 2014, the Company engaged with Nano-Technologies and its shareholders in a contingent agreement for a private placement (the “Agreement”), such that after the completion of the transaction, the Company will hold all of the issued and paid up capital of Nano-Technologies, and the shareholders of Nano-Technologies (the “Offerees”) will be related parties in the Company and will appoint directors on their behalf (the “Transaction” or the “Merger Transaction”). The completion of the Transaction was contingent upon the fulfillment of completion of raising capital in a total amount of $1,500,000 that will be raised from investors in consideration of the allocation of shares (“Capital Raising”). On the date of the completion of the Transaction, and subject to the completion of the Capital Raising as stated, and subject to the fulfillment of the conditions precedent set forth in the Agreement, the Offerees will transfer to the Company all of their holdings in the shares of Nano-Technologies, constituting all of the issued and paid up capital, and in consideration the Company will allocate to Offerees 6,931,303 Ordinary Shares, which constituted, after their allocation, and after the allocation of the Capital Raising shares, holdings at a rate of approximately 37.38% of the issued and paid up share capital of the Company and 4,322,329 non-tradable warrants that are exercisable into 4,322,329 Ordinary Shares, at an exercise price of NIS 0.8655 per share, provided that the Group meets the milestones set forth in the Agreement.

 

The milestones are based on the Company’s revenues and market capitalization in the TASE. As part of the Company’s engagement in the Merger Transaction, the Company engaged on July 3, 2014 in a private placement agreement with a third party (the “Investor”), whereby in consideration for a total of approximately NIS 2,569,000, the Company allocated to the Investor 2,967,938 Ordinary Shares. As a part of the Agreement, the Investor was given the right to appoint a director on its behalf to the Company’s board of directors and the right to join a private allocation to the current Related Parties of the Company, in the event that the Company seeks to raise additional cash capital.

 

In addition, the Company engaged in agreements with additional investors whereby in consideration for a total of approximately NIS 1,378,000, the Company will allocate to investors 1,592,143 Ordinary Shares and it was determined that as a part of raising the capital, the Company would allocate to Related Parties therein 1,375,794 Ordinary Shares in consideration for a total of approximately NIS 1,191,000.

 

On August 17, 2014, the general meeting of the Company’s shareholders approved the Merger Transaction, including the allocation of shares and non-tradable warrants to Offerees, and the allocation of shares to Investors and related parties. On August 25, 2014, the Merger Transaction, including the Capital Raising as stated was completed, and therefore, as of this date, the Company holds all of the issued and paid up capital of Nano-Technologies. This transaction was accounted for by analogy to a reverse acquisition, with the financial statements prepared as a continuation of Nano–Technologies’ financial statements, while the equity was adjusted to reflect retroactively the legal share capital of the Company.

 

  F- 25  

 

 

Nano Dimension Ltd.

Notes to the Consolidated Financial Statements

 

Note 12 Equity (Continued)

 

B. Transactions with issued and paid up share capital (Continued)

 

 In January 2015, the Company completed a round of fund raising, in which the Company issued to investors 1,508,572 Ordinary Shares, which constituted approximately 7.5% of the issued and paid up share capital of the Company at that time, and 1,508,572 non-tradable warrants, which are exercisable into 1,508,572 Ordinary Shares, according to the exercise terms determined. In addition, the Company has undertaken vis-à-vis the investors a price adjustment mechanism that will be activated if, during a period of 18 months from the issuance date, the Company performs additional fundraising, within which shares are allocated at a price that is lower than NIS 1.4 per share. The immediate consideration (gross) received as a result of the aforesaid fund raising amounted to a total of NIS 2,112,000. The immediate consideration (net) received as a result of the aforesaid fund raising amounted to a total of NIS 2,065,000. From the net issuance consideration, a total of approximately NIS 91,000 was attributed to the fair value of a financial derivative (adjustment mechanism). The remainder of the issuance consideration was attributed to equity instruments (shares and warrants), based on their relative fair value near the issuance date. Accordingly, a total of NIS 1,542,000 was attributed to Ordinary Shares and NIS 432,000 was attributed to warrants.

 

On February 16, 2015, the general meeting of the Company’s shareholders approved a private placement of 285,715 Ordinary Shares, which constituted approximately 1.4% of the issued and paid up share capital on the same date and 285,715 non-tradable warrants, which are exercisable into 285,715 Ordinary Shares, according to the exercise terms determined, to the chairman of the Company’s board of directors and an additional director of the Company. The immediate consideration (gross and net) received as a result of the aforesaid fund raising amounted to a total of NIS 400,000.

 

The shares and warrants were issued in April 2015. In addition, the Company has undertaken vis-à-vis the investors a price adjustment mechanism that will be activated if, during a period of 18 months from the issuance date, the Company performs additional fundraising, within which shares are allocated at a price that is lower than NIS 1.4 per share. The issuance consideration was allocated to equity instruments (Ordinary Shares and warrants), based on the relative fair value thereof on the issuance date. Accordingly, a total of approximately NIS 254,000 was attributed to Ordinary Shares and a total of approximately NIS 146,000 was attributed to warrants.

 

In March 2015, the Company completed additional fund raising from investors and related parties of the Company, in which the Company issued 3,956,545 Ordinary Shares, which constituted approximately 16.5% of the Company’s issued and paid up share capital at the time. In addition, the Company has undertaken vis-à-vis the investors a price adjustment mechanism that will be activated if the Company performs additional fundraising during a period of 18 months from the issuance date, within which shares are allocated at a price that is lower than NIS 1.65 per share, or if shares are allocated at a price equal to or less than NIS 2 thereafter. The immediate consideration (gross) received as a result of the aforesaid fund raising amounted to a total of approximately NIS 6,528,000. The immediate consideration (net) received as a result of the aforesaid fund raising amounted to a total of approximately NIS 6,402,000. From the net issuance consideration, a total of approximately NIS 37,000 was attributed to a financial derivative (adjustment mechanism), in accordance with a valuation calculated by the Company with the assistance of an external appraiser. The remainder of the issuance consideration in the amount of approximately NIS 6,365,000 was attributed to share capital.

 

On July 29, 2015, the Company completed additional fund raising from investors and related parties of the Company, in which the Company issued 7,671,089 Ordinary Shares, which constituted approximately 23.61% of the issued and paid up share capital of the Company on the same date and 3,835,546 non-tradable warrants, which are exercisable into 3,835,546 Ordinary Shares, according to the exercise terms determined. In addition, the Company has undertook vis-à-vis the investors a price adjustment mechanism that would be activated if the closing price of the Company’s shares at the end of 60 days after the completion of the allocation and the average closing price of a share of the Company on the five days before the 60th day was less than NIS 5.5. Under this mechanism, the investors would be entitled to an allocation of shares that will reflect the difference between the share price and the price paid by them (the “Compensation”), while the share price based on which the Compensation was calculated would not be less than NIS 4.75. In addition, the Company undertook vis-à-vis the investors an additional price adjustment mechanism that would be activated if the Company performs additional fundraising during a period of 12 months from the allocation date, within which shares would be allocated a price that is less than NIS 5.5 per share. The immediate (gross) consideration received in the issuance amounted to a total of approximately NIS 42,191,000. The net issuance consideration (after the reduction of issuance expenses) amounted to a total of approximately NIS 38,706,000. From the net issuance consideration, a total of approximately NIS 1,306,000 was attributed to a financial derivative (adjustment mechanism), in accordance with a valuation calculated by the Company with the assistance of an external appraiser. The remaining of the issuance consideration was attributed to equity instruments (Ordinary Shares and warrants), based on their relative fair value on the issuance date. Accordingly, a total of NIS 34,203,000 was attributed to shares and NIS 3,197,000 was attributed to warrants.

 

  F- 26  

 

 

Nano Dimension Ltd.

Notes to the Consolidated Financial Statements

 

Note 12 Equity (Continued)

 

B. Transactions with issued and paid up share capital (Continued)

 

On December 1, 2015, the Company issued, as an extension to the issuance on July 29, 2015, pursuant to a private placement, an aggregate of 1,552,877 Ordinary Shares. In addition, the Company issued non-tradable warrants to purchase up to 776,440 Ordinary Shares at an exercise price of NIS 9.00 per share. These warrants will expire 24 months from the date of issuance. The total (gross) consideration was approximately NIS 8,541,000. The total (net) consideration was approximately NIS 7,946,000, which was attributed to equity instruments (shares and warrants), based on their relative fair value on the issuance date. Accordingly, a total of NIS 7,188,000 was attributed to shares and NIS 758,000 was attributed to warrants. 

 

On September 29, 2016, the Company issued, pursuant to a public offering in the U.S., an aggregate of 9,250,000 Ordinary Shares. On October 11, 2016, the underwriters exercised their option to purchase an additional 1,376,375 Ordinary Shares, bringing the total gross proceeds from the offering to approximately NIS 51,872,000 ($13,800,000), before deducting underwriting discounts and commissions and other offering-related expenses. The total (net) consideration was approximately NIS 46,350,000.

 

On May 17, 2017, the Company announced that it signed a private placement agreement with Ayalim Trust Funds, an Israeli institutional investor. As a part of this transaction, the Company issued an aggregate of 3,430,000 Ordinary Shares at a price per share of NIS 4.2. The total (gross) consideration to the Company was approximately NIS 14,400,000 (approximately $4,000,000).

 

On June 1, 2017, the Company announced that it signed private placement agreements with Israeli and other non-U.S. investors. As a part of these transactions, the Company issued an aggregate of 4,044,050 Ordinary Shares at a price per share of NIS 4.2. The total (gross) consideration to the Company was approximately NIS 17,000,000 (approximately $4,700,000).

 

On June 14, 2017, the Company announced that it signed private placement agreements with several Israeli investors. As a part of these transactions, the Company issued an aggregate of 4,078,759 Ordinary Shares at a price per share of NIS 4.2. The total (gross) consideration to the Company was approximately NIS 17,130,000 (approximately $4,800,000).

 

The total (net) consideration to the Company for the abovementioned placements was approximately NIS 44,228,000 (approximately $12,393,000).

 

C. Treasury shares

 

As of December 31, 2017, the Company held 527,032 Ordinary Shares, constituting approximately 0.84% of its issued and paid up share capital.

 

Note 13 Revenues

 

      For the year ended December 31  
      2015     2016     2017  
      Thousand
NIS
    Thousand
NIS
    Thousand
NIS
 
  Printers rental     -       120       1,326  
  Consumables     -       55       663  
  Sales of printers (*)     -       -       995  
  Total revenue     -       175       2,984  

 

(*) The Company's identified performance obligations includes: Printer, maintenance, training and installation. The Company allocates the revenues to the identified performance obligations based on the relative estimated standalone selling price of such goods and services. Revenues allocated to the printers and ink are recognized when the control is passed at a point in time. Maintenance revenue is recognized ratably, on a straight-line basis, over the period of the services. Revenue from training and installation is recognized during the time of performance.

 

The trade receivables balance deriving from contracts with customers as of December 31, 2017 is NIS 231,000.

 

Note 14 Cost of revenues

 

      For the year ended December 31  
      2015     2016     2017  
      Thousand NIS     Thousand NIS     Thousand NIS  
  According to sources of revenue -                    
  Printers rental            -       49       427  
  Consumables     -       23       222  
  Sales of printers     -       -       822  
  Total     -       72       1,471  

 

  F- 27  

 

  Nano Dimension Ltd.

Notes to the Consolidated Financial Statements

   

Note 15 Further detail of profit or loss

 

      For the year ended December 31  
      2015     2016     2017  
      Thousand NIS     Thousand NIS     Thousand NIS  
  A. Research and development expenses, net                  
  Payroll     11,268       21,589       26,711  
  Materials     2,299       6,119       6,637  
  Subcontractors     7,696       1,179       542  
  Patent registration     238       130       206  
  Depreciation     242       683       1,591  
  Rental fees and maintenance     814 (*)     1,485 (*)     2,967  
  Other     378       1,453       875  
        22,935       32,638       39,529  
  Less – Development expenditure capitalized as intangible and tangible assets     (11,463 )     (16,273 )     -  
  Less – government grants     (383 )     (840 )     (582 )
        11,089       15,525       38,947  
                           
  B. Sales and marketing expenses                        
  Payroll     1,458       2,873       5,387  
  Marketing and advertising     386       737       1,377  
  Rental fees and maintenance     64       80       214  
  Travel abroad     8       174       845  
  Depreciation     -       -       36  
                           
        1,916 (*)     3,864 (*)     7,859  
                           
  C. General and administrative expenses                        
  Payroll     1,750 (*)     3,156 (*)     2,741  
  Fees     108       174       245  
  Professional services     4,139 (*)     6,183 (*)     5,255  
  Directors pay     2,643       2,850       1,773  
  Office expenses     315       887       1,014  
  Travel abroad     253 (*)     568 (*)     308  
 

Rental fees and maintenance

    -       -       301  
  Other     163 (*)     842       464  
        9,371       14,660       12,101  
                           
  D. Finance income                        
  Exchange rate differences     95       695       -  
  Revaluation of liability in respect of government grants     -       -       366  
  Revaluation of derivative instruments     1,434       -       -  
        1,529       695       366  
    Finance expense                        
  Interest on controlling shareholders loans     25       -       -  
  Exchange rate differences     -       -       3,201  
  Bank fees     43       113       100  
  Revaluation of liability in respect of government grants     77       438       -  
        145       551       3,301  

 

*Reclassified- see note 1.D.

  F- 28  

 

 

Nano Dimension Ltd.

Notes to the Consolidated Financial Statements

 

Note 16 Taxes on income

 

A. Corporate tax rate

 

Presented hereunder are the tax rates relevant to the Company in the years 2015-2017:

 

2015 – 26.5%, and

2016 – 25%

2017 – 24%

 

On January 4, 2016 the Knesset plenum passed the Law for the Amendment of the Income Tax Ordinance (Amendment 216) - 2016, by which, inter alia, the corporate tax rate would be reduced by 1.5% to a rate of 25% as from January 1, 2016.

 

Furthermore, on December 22, 2016 the Knesset plenum passed the Economic Efficiency Law (Legislative Amendments for Achieving Budget Objectives in the Years 2017 and 2018) – 2016, by which, inter alia, the corporate tax rate would be reduced from 25% to 23% in two steps. The first step will be to a rate of 24% as of January 2017 and the second step will be to a rate of 23% as of January 2018.

 

These changes had no impact on the financial statements.

 

B. Theoretical tax

 

The following presents the adjustment between the theoretical tax amount and the tax amount included in the financial statements:

 

      For the year ended December 31,  
      2015     2016     2017  
      Thousand NIS     Thousand NIS     Thousand NIS  
  Loss before taxes on income     (20,992 )     (34,470 )     (63,005 )
  Statutory tax rate     26.5 %     25 %     24 %
  Theoretical tax benefit     (5,563 )     (8,618 )     (15,121 )
  Increase in tax liability due to:                        
  Unrecognized expenses     1,598       2,449       2,264  
  Losses and benefits for tax purposes for which no deferred taxes were recorded     3,965       6,169       12,857  
  Taxes on income     -       -       -  

 

C. Tax assessments

 

The Company has final tax assessments until and including the 2012 tax year.

 

D. Accumulated losses for tax purposes and other deductible temporary differences

 

As of the reporting date, the Group has net operating loss for tax purposes in the amount of approximately NIS 107,000,000. The Israeli tax authorities may not permit the off-set of the accumulated losses that were incurred before the merger of the Company (see Note 12.B).

 

As of December 31, 2017, the Group has deductible temporary differences in the amount of approximately NIS 8,070,000, mainly relating to R&D expenses which are deductible over a period of three years for tax purpose.

 

The Group has not recognized a tax asset for the aforesaid losses and deductible temporary differences, due to the uncertainty regarding the ability to utilize those losses in the future.

 

  F- 29  

 

 

Nano Dimension Ltd.

Notes to the Consolidated Financial Statements

 

Note 17 Loss per share

 

      For the year ended December 31  
      2015     2016     2017  
  Weighted average of number of Ordinary Shares used in the calculation of the basic and diluted loss per share (in thousands)     26,819       40,760       56,540  
  Net loss used in calculation (thousand NIS)     20,992       34,470       63,005  

 

On December 31, 2017, 8,697,362 options and warrants (in 2016: 13,415,764, and 2015: 17,426,479) were excluded from the diluted weighted average number of Ordinary Shares calculation as their effect would have been anti-dilutive.

 

Note 18 Share-based payments

 

A. During 2015, the Company’s board of directors approved the grant of 609,888 non-tradable share options to an external consultant of the Company. The share options are exercisable into 609,888 Ordinary Shares. 50,824 of the share options were exercisable immediately and the remaining 559,064 share options will vest in 11 equal quarterly batches over a period of 33 months, starting 3 months from the grant date. Each stock option is exercisable during a period of three years from the vesting date, based on the amount of the financial benefit inherent in it on the exercise date (based on a cashless exercise mechanism). The exercise price of the first 304,944 Ordinary Shares is NIS 2 for each share option, and the exercise price of the remaining 304,944 Ordinary Shares is NIS 3 for each share option. The options include a cashless exercise mechanism.

 

On August 20, 2015, the Company’s board of directors approved the grant of 75,252 non-tradable share options to fundraising finders. The share options are exercisable into 75,252 Ordinary Shares during a period of 24 months, in consideration for an exercise price of NIS 9 for each share.

 

On November 5, 2015, the Company granted to employees of the Company (including the Company’s CFO), 1,512,500 share options (non-tradable), which are exercisable into 1,512,500 Ordinary Shares. One third of the share options would vest on year after the commencement of employment, and the remaining would vest in eight equal quarterly batches over a period of two years. The share options will be exercisable during the earlier of a period of four years from the vesting date, or 90 days from the end of employment date, in consideration for an exercise price of NIS 1.65 for each share option. The options include a cashless exercise mechanism.

 

On December 6, 2015, the Company issued non-tradable options to purchase 50,000 Ordinary Shares to a service provider at an exercise price of NIS 9.00 per share. The options were exercisable immediately. Such options will expire 24 months from the date of issuance.

 

On December 6, 2015, the Company issued non-tradable options to purchase 100,000 Ordinary Shares to an advisor at an exercise price of NIS 9.00 per share. Such options vest quarterly over two years and expire 48 months from the date of issuance. The options include a cashless exercise mechanism.

 

On December 13, 2015, the Company granted to employees of the Company 452,500 non-tradable share options, which are exercisable into 452,500 Ordinary Shares. One third of the share options will vest after one year from commencement of employment, and the remaining will vest in eight equal quarterly batches over a period of two years. The share options will be exercisable during the earlier of a period of four years from the vesting date, or 90 days from the end of employment date, in consideration for an exercise price of NIS 1.65 for each share option. The options include a cashless exercise mechanism.

 

  F- 30  

 

 

Nano Dimension Ltd.

Notes to the Consolidated Financial Statements

 

Note 18 Share-based payment (Continued)

 

On November 16, 2016, the Company granted to employees of the Company 976,500 share options (non-tradable), which are exercisable into 976,500 Ordinary Shares. One third of the share options will vest after one year from commencement of employment, and the remaining will vest in eight equal quarterly batches over a period of two years. The share options will be exercisable during the earlier of a period of four years from the vesting date, or 90 days from the end of employment date, in consideration for an exercise price of NIS 1.65 for each share option. The options include a cashless exercise mechanism.

 

On November 29, 2016, the Company issued non-tradable options to purchase 200,000 Ordinary Shares to four advisors (divided equally among them) at an exercise price of NIS 7.50 per share. Such options vest quarterly over one year and expire 3 years from the grant date.

 

On January 17, 2017, the Company issued 75,000 restricted Ordinary Shares (15,000 ADSs) and non-tradable options to purchase 75,000 Ordinary Shares (15,000 ADSs), to a service provider at an exercise price of USD 10.00 per ADS. The options are exercisable immediately and will expire 18 months from the grant date. The options include a cashless exercise mechanism.

 

On March 21, 2017, the Company issued 25,000 restricted Ordinary Shares (5,000 ADSs) to a service provider.

 

On May 10, 2017, the Company issued 25,000 restricted Ordinary Shares (5,000 ADSs) to a service provider.

 

On May 24, 2017, the Company granted to employees of the Company 1,107,334 share options (non-tradable), which are exercisable into 1,107,334 Ordinary Shares. One third of the share options will vest after one year from commencement of employment, and the remaining will vest in eight equal quarterly batches over a period of two years. The share options will be exercisable during the earlier of a period of four years from the vesting date, or 90 days from the end of employment date, in consideration for an exercise price of NIS 1.65 for each share option. The options include a cashless exercise mechanism.

 

On November 20, 2017, the Company granted to employees and officer of the Company 710,000 share options (non-tradable), which are exercisable into 710,000 Ordinary Shares. For 460,000 options- One third of the share options will vest after one year from commencement of employment, and the remaining will vest in eight equal quarterly batches over a period of two years. For the remaining 250,000 options- the options will vest on a quarterly basis over a period of three years. The share options will be exercisable during the earlier of a period of four years from the vesting date, or 90 days from the end of employment date. The exercise price for 460,000 options is NIS 3.43 for each share option, and for the remaining 250,000 options- the exercise price is NIS 5.50 for each share option. The options include a cashless exercise mechanism.

 

B. On February 16, 2015, the general meeting of the Company’s shareholders approved a grant of 370,878 non-tradable share options to the chairman of the board, which are exercisable into 370,878 Ordinary Shares, subject to a vesting period of 2 years and for an expiration period of 5 years from the grant date, with an exercise price of NIS 1.75 per share. The options include a cashless exercise mechanism.

 

On July 20, 2015, the general meeting of the Company’s shareholders approved a grant of 1,600,000 share options (non-tradable) to the four controlling shareholders (divided equally among them), which are exercisable into 1,600,000 Ordinary Shares. Additionally, the general meeting of the Company’s shareholders approved a grant of 760,000 share options (non-tradable) to four directors of the Company (of which 400,000 share options are granted to the chairman of the board), which are exercisable into 760,000 Ordinary Shares. The share options granted to the four controlling shareholders of the Company, the chairman of the board of directors and the three additional directors of the Company will vest in 12 equal quarterly batches over a period of three years, and be exercisable during a period of five years from the grant date, in consideration for an exercise price of NIS 5.5 for each share. The options include a cashless exercise mechanism.

 

On October 21, 2015, the general meeting of the Company’s shareholders approved a grant of 360,000 non-tradable share options for each of the two external directors and the independent director, which are exercisable into 360,000 Ordinary Shares. The share options will vest in 12 equal quarterly batches over a period of 3 years, and be exercisable during a period of 5 years from the grant date, in consideration for an exercise price of NIS 5.5 for each share option. The options include a cashless exercise mechanism.

 

On December 31, 2015, the general meeting of the Company’s shareholders approved a grant of 250,000 share options (non-tradable) to a director, which are exercisable into 250,000 Ordinary Shares. The share options will vest in 12 equal quarterly batches over a period of three years, starting from January 1, 2016, and be exercisable during a period of five years from the grant date, in consideration for an exercise price of NIS 9 for each share option. The options include a cashless exercise mechanism.

 

On April 19, 2017, the general meeting of the Company’s shareholders approved a grant of 275,000 share options (non-tradable) to a director, which are exercisable into 275,000 Ordinary Shares. The share options will vest in 12 equal quarterly batches over a period of three years, starting from April 20, 2017, and be exercisable during a period of five years from the grant date, in consideration for an exercise price of NIS 6.5 for each share option. The options include a cashless exercise mechanism.

 

C. On April 2, 2015, the Company’s board of directors approved a grant of 559,097 non-tradable share options to Yissum- see Note 11.A.

 

  F- 31  

 

 

Nano Dimension Ltd.

Notes to the Consolidated Financial Statements

 

Note 18 Share-based payment (Continued) 

 

D. The fair value of share options is measured using the Black-Scholes formula or Binomial pricing model. Measurement inputs include the share price on the measurement date, the exercise price of the instrument, expected volatility (based on the weighted average volatility of a sample of companies’ shares which are similar in characteristics and operations to the Group, over the expected term of the options), expected term of the options (based on general option holder behavior), expected dividends, and the risk-free interest rate (based on government debentures).

 

The following is the data used in determining the fair value of the share options:

 

      18.A-
Consultants
and
Employees
    18.B-
Directors
    18.C-
Yissum
 
  Number of share options granted     5,743,722       3,245,000       559,097  
  Fair value in the grant date (thousand NIS)     16,284       10,786       2,833  
  Range of share price (NIS)      1.82 – 6.99        4.68 – 7.24       7.03  
  Range of exercise price (NIS)      1.65 - 9        5.50 – 6.75       2.7  
  Range of expected share price volatility      40.3%-58.53 %      53.75%-61.27 %     57.26 %
  Range of estimated life (years)      1.5 – 9.01       4 – 5       5  
  Range of weighted average of risk-free interest rate      0.59%-1.72 %      0.88%-1.32 %     1.15 %
  Expected dividend yield     -       -       -  
  Outstanding as of December 31, 2017     4,609,634       3,145,001       223,697  
  Exercisable as of December 31, 2017     2,345,351       2,176,672       223,697  

 

E. The number of share options granted to employees and consultants, and included in Note 18.A are as follows:

 

      2016     2017  
  Outstanding at January 1     3,071,018       3,799,892  
  Granted during the year     1,176,500       1,892,334  
  Exercised during the year (*)     (378,459 )     (348,314 )
  Forfeited during the year     (69,167 )     (734,278 )
  Outstanding at December 31     3,799,892       4,609,634  
  Exercisable as of December 31     1,521,687       2,345,351  

 

The number of share options granted to directors and included in Note 18.B are as follows:

 

      2016     2017  
  Outstanding at January 1     3,090,878       3,340,878  
  Granted during the year     250,000       275,000  
  Exercised during the year     -       (370,878 )
  Forfeited during the year     -       (99,999 )
  Outstanding at December 31     3,340,878       3,145,001  
  Exercisable as of December 31     1,557,556       2,176,672  

 

The number of share options granted to Yissum and included in Note 18.C are as follows:

 

      2016     2017  
  Outstanding at January 1     559,097       223,697  
  Granted during the year     -       -  
  Exercised during the year     (335,400 )     -  
  Outstanding at December 31     223,697       223,697  
  Exercisable as of December 31     223,697       223,697  

  

(*) The weighted average exercise price at the date of exercise for share options exercised in 2017 was NIS 1.84 (in 2016 and 2015: NIS 1.65).

 

F.

The share based payments expenses in 2017 were NIS 6,316,000 (in 2016: NIS 7,785,000).

 

Expenses for share based payments in 2016 include expenses in an amount of approximately NIS 1,824,000 that were capitalized to an intangible asset - see note 2.M.

 

Expenses for share based payments in 2017 include expenses in an amount of approximately NIS 52,000 that were capitalized to property, plant and equipment and expenses in an amount of approximately NIS 71,000 that were capitalized to inventory.

 

  F- 32  

 

 

Nano Dimension Ltd.

Notes to the Consolidated Financial Statements  

 

Note 19 Financial instruments

 

A. Risk management policy

 

The actions of the Group expose it to various financial risks, such as a market risk (including a currency risk, fair value risk regarding interest rate and price risk), credit risk, liquidity risk and cash flow risk for the interest rate. The comprehensive risk-management policy of the Group focuses on actions to limit the potential negative impacts on financial performance of the Group to a minimum. The Group does not typically use derivative financial instruments in order to hedge exposures. Risk management is performed by the Group’s Chief Executive Officer in accordance with the policy approved by the board of directors. 

 

B. Credit risk

 

The Group does not have a significant concentration of credit risks.

 

The cash of the Group are deposited in Israeli and U.S. banking corporations. In the estimation of the Group’s management, the credit risk for these financial instruments is low.

 

C. Classification of financial instruments

 

The following is a classification of the financial assets and financial liabilities of the Group for groups of financial instruments in accordance with IAS 39:

 

      December 31,  
      2016     2017  
      Thousand NIS     Thousand NIS  
  Financial assets            
  Cash     47,599       21,159  
  Restricted deposits     925       1,570  
  Trade receivables     149       325  
  Other receivables     1,408       827  
        50,081       23,881  
  Financial liabilities                
  Financial liabilities measured at amortized cost     10,290       10,372  

 

D. Currency risk

 

A currency risk is the risk of fluctuations in a financial instrument, as a result of changes in the exchange rate of the foreign currency.

 

  F- 33  

 

 

Nano Dimension Ltd.

Notes to the Consolidated Financial Statements

 

Note 19 Financial instruments (Continued)

 

D. Currency risk (Continued)

 

The following is the classification and linkage terms of the financial instruments of the Group (in thousand NIS):

 

      NIS     Linked to the US dollar     Linked to the EURO and Other     Total  
  December 31, 2017                        
  Cash     823       20,332       4       21,159  
  Restricted deposits     1,501       69       -       1,570  
  Trade receivables     -       71       254       325  
  Other receivables     827       -       -       827  
        3,151       20,472       258       23,881  
  Financial liabilities at amortized cost     5,766       4,606       --       10,372  
  Total net financial assets (liabilities)     (2,615 )     15,866       258       13,509  
                                   
  December 31, 2016                                
  Cash     3,501       44,065       33       47,599  
  Restricted deposits     925       -       -       925  
  Trade receivables     -       149               149  
  Other receivables     1,408       -       -       1,408  
        5,834       44,214       33       50,081  
  Financial liabilities at amortized cost     6,651       3,586       53       10,290  
  Total net financial assets (liabilities)     (817 )     40,628       (20 )     39,791  

 

The following is a sensitivity analysis of changes in the exchange rate of the dollar as of the reporting date:

 

      Profit (loss) from the change  
      thousand NIS  
  Increase at a rate of 5%     (793 )
  Increase at a rate of 10%     (1,586 )
  Decrease at a rate of 5%     793  
  Decrease at a rate of 10%     1,586  

 

E. Fair value of financial instruments

 

The fair value of the financial instruments of the Group is similar or equal to their book value.

 

  F- 34  

 

 

Nano Dimension Ltd.

Notes to the Consolidated Financial Statements

 

Note 19 Financial instruments (Continued)

 

F. Liquidity risk

 

The table below presents the repayment dates of the Group’s financial liabilities based on the contractual terms in undiscounted amounts:

 

      First year     More than a year or undetermined     Total  
  December 31, 2017                  
  Trade payables     1,775       -       1,775  
  Other payables     5,738       98       5,836  
  Liability in respect of government grants     -       2,886       2,886  
        7,513       2,984       10,497  
  December 31, 2016                        
  Trade payables     2,612       -       2,612  
  Other payables     4,856       98       4,954  
  Liability in respect of government grants     -       2,420       2,420  
        7,468       2,518       9,986  

 

  F- 35  

 

 

Nano Dimension Ltd.

Notes to the Consolidated Financial Statements

 

Note 20 Transactions and Balances with related parties

 

A. Balances with related parties

 

      December 31,  
      2016     2017  
      Thousands NIS     Thousands NIS  
  Other payables     369       400  

 

B. Shareholders and other related parties benefits

 

      Year ended on December 31,  
      2015     2016     2017  
      Thousand NIS     Thousand NIS     Thousand NIS  
  Salaries and related expenses- related parties employed by the Group     4,192       5,764       3,944  
  Number of related parties     5       5       5  
  Compensation for directors not employed by the Group     2,643       2,838       1,778  
  Number of directors     8       8       9  

 

C. On February 16, 2015, the general meeting of the Company’s shareholders approved a private placement of 285,715 Ordinary Shares- see Note 12.B. In addition, on February 16, 2015, the Company’s general meeting of the Company’s shareholders approved the Company’s engagement in an agreement with Mr. Itschak Shrem for his services as chairman of the Company’s board of directors for a period of three years. In accordance with the terms of employment, Mr. Shrem will be entitled to a monthly salary of NIS 7,500, which will be increased to a total of NIS 10,000 if and when the Company completes fund raising of at least NIS 8,000,000, for 40% capacity employment. In addition, Mr. Shrem will be entitled, at no consideration, to a grant of 370,878 stock options- see Note 18.B.

 

  F- 36  

 

 

Nano Dimension Ltd.

Notes to the Consolidated Financial Statements

 

Note 20 Transactions and Balances with related parties (Continued)

 

D. On July 20, 2015, the general meeting of the Company’s shareholders approved the terms of employment of the four controlling shareholders of the Company, in their capacities as officers and directors of the Company, as set forth below: Mr. Amit Dror, who serves as Chief Executive Officer of the Company, Mr. Dagi Ben-Noon, who then served as Chief Operating Officer, Mr. Simon Anthony-Fried, who serves as Chief Marketing Officer, and Mr. Sharon Fima, who then served as Chief Technologies Officer. Under the approved terms of employment, each of the controlling shareholders will be entitled, during a period of three years and in consideration for a full-time position, to a monthly salary of approximately NIS 37,000, in addition to social benefits as customary. In addition, the general meeting of the Company’s shareholders approved a grant of 1,600,000 stock options (non-tradable) to the four controlling shareholders (divided equally among them), which are exercisable into 1,600,000 Ordinary Shares. Additionally, the general meeting of the Company’s shareholders approved the update to the terms of employment of Mr. Itschak Shrem, in his capacity as chairman of the Company’s board of directors for a period of three years. Mr. Shrem will be entitled to a monthly salary of NIS 30,000, for a 75% position. In addition, the general meeting of the Company’s shareholders approved a grant of 760,000 share options (non-tradable) to four directors of the Company (400,000 of which are granted to the chairman of the board), which are exercisable into 760,000 Ordinary Shares.

  

E. On December 31, 2015, the general meeting of the Company’s shareholders approved to amend the notice period of the four controlling shareholders of the Company: Mr. Amit Dror, who serves as Chief Executive Officer of the Company, Mr. Dagi Ben-Noon, who then served as Chief Operating Officer, Mr. Simon Anthony-Fried, who serves as Chief Marketing Officer, and Mr. Sharon Fima, who then served as Chief Technologies Officer, to a period of 6 months. The general meeting of the Company’s shareholders also approved to amend the Company’s compensation policy accordingly.

 

F. On December 31, 2015, the general meeting of the Company’s shareholders approved to grant Ofir Baharav, a director, 250,000 stock options (non-tradable), which are exercisable into 250,000 Ordinary Shares, at an exercise price of NIS 9 per share. On April 19, 2017, the general meeting of the Company’s shareholders approved to reduce the exercise price to NIS 6.75 per share.

 

G. On January 27, 2016, pursuant to an exercise of 3,746,161 warrants by Mr. Amit Dror, who serves as Chief Executive Officer of the Company, Mr. Dagi Ben-Noon, who serves as Chief Operating Officer, Mr. Simon Anthony-Fried, who serves as Chief Marketing Officer, and Mr. Sharon Fima, who serves as Chief Technologies Officer, and in consideration of approximately NIS 3,242 thousands, the Company issued 3,746,161 Ordinary Shares.

 

H. On April 19, 2017, the general meeting of the Company’s shareholders approved the immediate acceleration of the unvested options granted to Yoel Yogev and Zvika Yemini in 2015, and that their options shall remain exercisable for an extended period of time until November 2020, subject to their resignation from the Company’s Board of Directors.

 

I. On April 19, 2017, the general meeting of the Company’s shareholders approved to grant Avi Reichental, a director, 275,000 stock options (non-tradable), which are exercisable into 275,000 Ordinary Shares, at an exercise price of NIS 6.50 per share.

 

J. On November 20, 2017, the board of directors of the Company approved a non-exceptional transactions in which Mr. Avi Reichental, a director of the Company, has a personal interest, for an open innovation and show room agreements between Nano Dimension USA Inc. and XponentialWorks and Techniplas, whereby the Company will lease space and use sales and marketing services in favor of the customer experience center in Ventura, as well as establish a cooperation in the field of car electronics starting on December 1, 2017.

 

Note 21 Events after the reporting date

 

A. After the reporting period, in January 2018, the Company issued options to purchase 825,000 Ordinary Shares to officers of the Company at an exercise price of NIS 5.5 per share.

 

B. After the reporting period, in February 2018, the Company issued, pursuant to a public offering in the U.S., an aggregate of 30,000,000 Ordinary Shares (6,000,000 ADSs). Also, in February 2018, the underwriters exercised their option to purchase an additional 4,500,000 Ordinary Shares (900,000 ADSs), bringing the total gross proceeds from the offering to approximately $13,800,000, before deducting underwriting discounts and commissions and other offering-related expenses.

 

 

F-37

 

 

 

Exhibit 8.1

 

LIST OF SUBSIDIARIES

 

Company Name Jurisdiction of Incorporation   Jurisdiction of Incorporation

Nano Dimension Technologies Ltd.

  Israel
     
Nano Dimension USA Inc.  

Delaware

 

Exhibit 12.1

 

CERTIFICATION PURSUANT TO EXCHANGE ACT RULE 13a-14(a) or 15d-14(a)

 

I, Amit Dror, certify that:

 

1. I have reviewed this annual report on Form 20–F of Nano Dimension Ltd.;

 

2. Based on my knowledge, this annual report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this report;

 

3. Based on my knowledge, the financial statements, and other financial information included in this annual report, fairly present in all material respects the financial condition, results of operations and cash flows of the registrant as of, and for, the periods presented in this report;

 

4. The Company’s other certifying officer and I are responsible for establishing and maintaining disclosure controls and procedures (as defined in Exchange Act Rules 13a–15(e) and 15d–15(e)) and internal control over financial reporting (as defined in Exchange Act Rules 13a-15(f) and 15d-15(f)) for the Company and have:

 

a) Designed such disclosure controls and procedures, or caused such disclosure controls and procedures to be designed under our supervision, to ensure that material information relating to the Company, including its consolidated subsidiaries, is made known to us by others within those entities, particularly during the period in which this report is being prepared;

 

b) Designed such internal control over financial reporting, or caused such internal control over financial reporting to be designed under our supervision, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles;

 

c) Evaluated the effectiveness of the Company’s disclosure controls and procedures and presented in this report our conclusions about the effectiveness of the disclosure controls and procedures, as of the end of the period covered by this report based on such evaluation; and

 

d) Disclosed in this report any change in the Company’s internal control over financial reporting that occurred during the period covered by the annual report that has materially affected, or is reasonably likely to materially affect, the Company’s internal control over financial reporting; and

 

5. The Company’s other certifying officer and I have disclosed, based on our most recent evaluation of internal control over financial reporting, to the Company’s auditors and the audit committee of the Company’s board of directors (or persons performing the equivalent function):

 

a) All significant deficiencies and material weaknesses in the design or operation of internal control over financial reporting which are reasonably likely to adversely affect the Company’s ability to record, process, summarize and report financial information; and

 

b) Any fraud, whether or not material, that involves management or other employees who have a significant role in the Company’s internal control over financial reporting.

 

Date: March 15, 2018 /s/ Amit Dror
  Amit Dror
  Chief Executive Officer

 

Exhibit 12.2

 

CERTIFICATION PURSUANT TO EXCHANGE ACT RULE 13a-14(a) or 15d-14(a)

  

I, Yael Sandler, certify that:

 

1. I have reviewed this annual report on Form 20–F of Nano Dimension Ltd.;

 

2. Based on my knowledge, this annual report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this report;

 

3. Based on my knowledge, the financial statements, and other financial information included in this annual report, fairly present in all material respects the financial condition, results of operations and cash flows of the registrant as of, and for, the periods presented in this report;

 

4. The Company’s other certifying officer and I are responsible for establishing and maintaining disclosure controls and procedures (as defined in Exchange Act Rules 13a–15(e) and 15d–15(e)) and internal control over financial reporting (as defined in Exchange Act Rules 13a-15(f) and 15d-15(f)) for the Company and have:

 

a) Designed such disclosure controls and procedures, or caused such disclosure controls and procedures to be designed under our supervision, to ensure that material information relating to the Company, including its consolidated subsidiaries, is made known to us by others within those entities, particularly during the period in which this report is being prepared;

 

b) Designed such internal control over financial reporting, or caused such internal control over financial reporting to be designed under our supervision, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles;

 

c) Evaluated the effectiveness of the Company’s disclosure controls and procedures and presented in this report our conclusions about the effectiveness of the disclosure controls and procedures, as of the end of the period covered by this report based on such evaluation; and

 

d) Disclosed in this report any change in the Company’s internal control over financial reporting that occurred during the period covered by the annual report that has materially affected, or is reasonably likely to materially affect, the Company’s internal control over financial reporting; and

 

5. The Company’s other certifying officer and I have disclosed, based on our most recent evaluation of internal control over financial reporting, to the Company’s auditors and the audit committee of the Company’s board of directors (or persons performing the equivalent function):

 

a) All significant deficiencies and material weaknesses in the design or operation of internal control over financial reporting which are reasonably likely to adversely affect the Company’s ability to record, process, summarize and report financial information; and

 

b) Any fraud, whether or not material, that involves management or other employees who have a significant role in the Company’s internal control over financial reporting.

 

Date: March 15, 2018 /s/ Yael Sandler
  Yael Sandler
  Chief Financial Officer

 

Exhibit 13.1

 

CERTIFICATION PURSUANT TO

18 U.S.C. Section 1350

 

In connection with the filing of the Annual Report on Form 20-F for the period ended December 31, 2017 (the “Report”) by Nano Dimension Ltd. (the “Company”), the undersigned, as the Chief Executive Officer of the Company, hereby certifies pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002, that, to my knowledge:

 

(1)          the Report fully complies with the requirements of Section 13(a) or Section 15(d) of the Securities Exchange Act of 1934; and

 

(2)          the information contained in the Report fairly presents, in all material respects, the financial condition and results of operations of the Company.

 

Date: March 15, 2018 /s/ Amit Dror
  Amit Dror
  Chief Executive Officer

 

Exhibit 13.2

 

CERTIFICATION PURSUANT TO

18 U.S.C. Section 1350

 

In connection with the filing of the Annual Report on Form 20-F for the period ended December 31, 2017 (the “Report”) by Nano Dimension Ltd. (the "Company"), the undersigned, as Chief Financial Officer of the Company, hereby certifies pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002, that, to my knowledge:

 

(1)          the Report fully complies with the requirements of Section 13(a) or Section 15(d) of the Securities Exchange Act of 1934; and

 

(2)          the information contained in the Report fairly presents, in all material respects, the financial condition and results of operations of the Company.

 

Date: March 15, 2018 /s/ Yael Sandler
  Yael Sandler
  Chief Financial Officer

 

 

 

Exhibit 15.1

   

Consent of Independent Registered Public Accounting Firm

 

The Board of Directors

 

Nano Dimension Ltd.:

 

We consent to the incorporation by reference in the registration statement (No. 333-217173) on Form F-3, and the registration statement (No. 333-214520) on Form S-8, of Nano Dimension Ltd. of our report dated March 14, 2018, with respect to the consolidated statements of financial position of Nano Dimension Ltd. and its subsidiaries as of December 31, 2016 and 2017, and the related consolidated statements of profit or loss and other comprehensive income, changes in equity and cash flows for each of the years in the three-year period ended December 31, 2017, which report appears in the December 31, 2017 annual report on Form 20-F of Nano Dimension Ltd.

 

/s/ Somekh Chaikin  
Somekh Chaikin  
Certified Public Accountants (Israel)  
A member firm of KPMG International  
   
Tel Aviv, Israel  
March 14, 2018