SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
F O R M 6-K
REPORT OF FOREIGN PRIVATE ISSUER PURSUANT
TO RULE 13a-16 OR 15d-16
UNDER THE SECURITIES EXCHANGE ACT OF 1934
For the month of
November 2020
Commission File Number 1-32135
SEABRIDGE GOLD INC.
(Name of Registrant)
106 Front Street East, Suite 400, Toronto, Ontario, Canada M5A 1E1
(Address of Principal Executive Office)
Indicate by check mark whether the registrant files or will file annual reports under cover of Form 20-F or Form 40-F.
Form 20-F ☐ Form 40-F ☒
Indicate by check mark if the registrant is submitting the Form 6-K in paper as permitted by Regulation S-T Rule 101(b)(1): ☐
Indicate by check mark if the registrant is submitting the Form 6-K in paper as permitted by Regulation S-T Rule 101(b)(7): ☐
Indicate by check mark whether by furnishing the information contained in this Form, the registrant is also thereby furnishing the information to the Commission pursuant to Rule 12g3-2(b) under the Securities Exchange Act of 1934.
Yes ☐ No ☒
If “Yes” is marked, indicate below the file number assigned to the registrant in connection with Rule 12g3-2(b): 82- _______
SEABRIDGE GOLD INC.
(the “Company”)
See the Exhibit Index hereto for a list of the documents filed herewith and forming a part of this Form 6-K.
Exhibit 99.2 hereto is incorporated by reference (as exhibit) to the Company’s registration statements on Form F-10 (File No. 333-229373) and Form S-8 (File No. 333-211331), as may be amended and supplemented.
Seabridge Gold Inc. (the “Company”) filed a technical report titled “NI 43-101” Technical Report with the securities regulatory authorities in Canada. The Technical Report is hereby being furnished to the Securities and Exchange Commission (“SEC”) as Exhibit 99.1 to this current report on Form 6-K. The Technical Report was prepared in accordance with National Instrument 43-101 of the Canadian Securities Administrators (“NI 43-101”).
All mineral resources in the Technical Report have been estimated in accordance with the definition standards on mineral resources and mineral reserves of the Canadian Institute of Mining, Metallurgy and Petroleum referred to in NI 43-101. U.S. reporting requirements for disclosure of mineral properties are governed by the SEC Industry Guide 7 (“Guide 7”). NI 43-101 and Guide 7 standards are substantially different. The terms “mineral reserve”, “proven mineral reserve” and “probable mineral reserve” are Canadian mining terms as defined in accordance with NI 43-101. These definitions differ from the definitions in Guide 7. Under Guide 7 standards, a “final” or “bankable” feasibility study is required to report reserves, the three-year historical average price is used in any reserve or cash flow analysis to designate reserves and the primary environmental analysis or report must be filed with the appropriate governmental authority.
The Technical Report uses the terms “mineral resource,” “measured mineral resource,” “indicated mineral resource” and “inferred mineral resource”. These terms are defined in and required to be disclosed by NI 43-101; however, these terms are not defined terms under Guide 7 and are normally not permitted to be used in reports and registration statements filed with the SEC. Investors are cautioned not to assume that any part or all of mineral deposits in these categories will ever be converted into reserves. “Inferred mineral resources” have a great amount of uncertainty as to their existence, and great uncertainty as to their economic and legal feasibility. It cannot be assumed that all or any part of an inferred mineral resource will ever be upgraded to a higher category. Under Canadian rules, estimates of inferred mineral resources may not form the basis of feasibility or pre-feasibility studies, except in rare cases. Investors are cautioned not to assume that all or any part of an inferred mineral resource exists or is economically or legally mineable. Disclosure of “contained pounds” in a resource is permitted disclosure under Canadian regulations; however, the SEC normally only permits issuers to report mineralization that does not constitute “reserves” by SEC standards as in place tonnage and grade without reference to unit measures.
The SEC has adopted amendments to its disclosure rules to modernize its mineral property disclosure requirements, with compliance required for the first fiscal year beginning on or after January 2, 2021. When effective, the new rules will replace the currently effective rules.
The controlling and binding version of the “NI 43-101” Technical Report is as filed on www.sedar.com and the furnishing of the Report “as is” in this Form 6-K is only for convenience of the Company’s investors.
1
SIGNATURE
Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.
Seabridge Gold Inc. | ||
(Registrant) | ||
By: | /s/ Chris Reynolds | |
Name: | Chris Reynolds | |
Title: | VP Finance and CFO |
Date: November 18, 2020
2
EXHIBIT INDEX
3
Exhibit 99.1
Report to: |
Seabridge Gold Inc.
Northwestern British Columbia, Canada |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Effective Date: April 30, 2020
|
Prepared by: |
William E. Threlkeld, P.Geo, P.G., Seabridge Gold Inc.
Hassan Ghaffari, P.Eng., Tetra Tech, Inc. Jianhui (John) Huang, Ph.D., P.Eng., Tetra Tech, Inc. James H. Gray, P.Eng., Moose Mountain Technical Services Ross Hammett, Ph.D., P.Eng., Golder Associates Ltd. Brendon Masson, P.Eng., McElhanney Consulting Services Ltd. Derrek Kinakin, M.Sc., P.Geo., P.G., BGC Engineering Inc. Michael J. Lechner, P.Geo., RPG, CPG, Resource Modeling Inc. J. Graham Parkinson, P.Geo., Klohn Crippen Berger Ltd. Rolf Schmidt, P. Geo., ERM Consultants Canada Ltd. Neil Brazier, P.Eng., WN Brazier Associates Inc. Kirk Hanson, P.E., Wood Canada Ltd. |
|
Important NOtice
This report was prepared as National Instrument 43-101 Technical Report for Seabridge Gold Inc. (Seabridge) by Tetra Tech, Inc., Moose Mountain Technical Services, Golder Associates Ltd., BGC Engineering Inc., Resource Modeling Inc., McElhanney Consulting Services Ltd., Klohn Crippen Berger Ltd, ERM Consultants Canada Ltd, WN Brazier Associates Inc., and Wood Canada Limited, collectively the Report Authors. The quality of information, conclusions, and estimates contained herein is consistent with the level of effort involved in the Report Authors’ services, based on i) information available at the time of preparation, ii) data supplied by outside sources, and iii) the assumptions, conditions, and qualifications set forth in this report. This report is intended for use by Seabridge subject to the respective terms and conditions of its contracts with the individual Report Authors. Those contracts permit Seabridge to file this report as a Technical Report with Canadian Securities Regulatory Authorities pursuant to provincial and territorial securities law. Except for the purposes legislated under Canadian provincial and territorial securities law, any other use of this report by any third party is at that party’s sole risk.
Seabridge Gold Inc. | ii | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Table of Contents
1.0 | Summary | 1-1 | ||
1.1 | Introduction | 1-1 | ||
1.2 | Key Study Outcomes | 1-2 | ||
1.3 | Property Description and Location | 1-3 | ||
1.4 | Accessibility, Climate, Local Resources, Physiography and Infrastructure | 1-5 | ||
1.5 | Geological Setting And Mineralization | 1-5 | ||
1.6 | History | 1-9 | ||
1.7 | Mineral Resources | 1-9 | ||
1.8 | 2016 PFS Data Verification | 1-12 | ||
1.9 | Mining Methods | 1-12 | ||
1.9.1 | Mineral Reserve Estimate | 1-12 | ||
1.9.2 | Mine Production Plan | 1-13 | ||
1.10 | Mineral Processing And Metallurgical Testing | 1-16 | ||
1.11 | 2016 Recovery Methods | 1-16 | ||
1.12 | 2016 Project Infrastructure | 1-18 | ||
1.12.1 | Geohazards | 1-18 | ||
1.12.2 | Tailings Management | 1-18 | ||
1.12.3 | Mine Site Water Management | 1-19 | ||
1.12.4 | Permanent Access Roads | 1-20 | ||
1.12.5 | Winter Access Road | 1-20 | ||
1.12.6 | Off-Site Infrastructure | 1-20 | ||
1.12.7 | Tunneling | 1-20 | ||
1.12.8 | Power Supply and Distribution | 1-21 | ||
1.13 | Environmental Studies, Permitting, and Social or Community Impact | 1-21 | ||
1.13.1 | Benefit Agreement | 1-22 | ||
1.13.2 | Closure and Reclamation | 1-22 | ||
1.14 | 2016 Capital Cost Estimate | 1-22 | ||
1.15 | 2016 Operating Cost Estimate | 1-24 | ||
1.16 | 2016 Economic Evaluation | 1-25 | ||
1.16.1 | Sensitivity Analysis | 1-27 | ||
1.17 | Recommendations | 1-29 | ||
1.17.1 | 2016 PFS Recommendations | 1-29 | ||
2.0 | Introduction | 2-1 | ||
2.1 | Overview | 2-1 | ||
2.2 | Terms of Reference | 2-1 | ||
2.2.1 | 2016 Prefeasibility Study Mineral Resource Estimate Update | 2-1 | ||
2.2.2 | 2016 Prefeasibility Study Data Verification | 2-1 |
Seabridge Gold Inc. | iii | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
2.3 | Sources of Information | 2-2 | ||
2.4 | Effective Dates | 2-2 | ||
2.5 | Qualified Persons | 2-2 | ||
2.6 | Site Visits | 2-2 | ||
3.0 | Reliance on Other Experts | 3-1 | ||
4.0 | Property Description and Location | 4-1 | ||
5.0 | Accessibility, Climate, Infrastructure, Local Resources and Physiography | 5-1 | ||
6.0 | History | 6-1 | ||
6.1 | Exploration History | 6-1 | ||
6.2 | Historical Resource Estimates | 6-4 | ||
6.3 | History of Production | 6-4 | ||
7.0 | GEOLOGICAL SETTING AND MINERALIZATION | 7-1 | ||
7.1 | Geological Setting | 7-1 | ||
7.2 | Mineralization | 7-3 | ||
7.2.1 | Kerr Zone | 7-3 | ||
7.2.2 | Sulphurets Zone | 7-8 | ||
7.2.3 | Mitchell Zone | 7-13 | ||
7.2.4 | Iron Cap Zone | 7-18 | ||
8.0 | DEPOSIT TYPES | 8-1 | ||
9.0 | exploration | 9-1 | ||
9.1 | 2011 Geophysical Exploration Program | 9-1 | ||
9.1.1 | Results of 2011 Geophysical Program | 9-1 | ||
9.2 | 2013 Geophysical Exploration Program | 9-1 | ||
9.2.1 | Results of 2013 Geophysical Program | 9-2 | ||
9.3 | 2014 Geophysical Exploration Program | 9-3 | ||
9.3.1 | Results of 2014 Geophysical Programs | 9-3 | ||
9.4 | 2015 Geophysical Exploration Program | 9-3 | ||
9.5 | 2019 Geophysical Program | 9-4 | ||
10.0 | Drilling | 10-1 | ||
10.1 | Introduction | 10-1 | ||
10.2 | Type and Extent of drilling | 10-4 | ||
10.3 | Drilling Procedures | 10-10 | ||
10.4 | QP Comments Regarding Drilling and Sampling Factors | 10-13 | ||
11.0 | Sample Preparation, Analysis and Security | 11-1 | ||
11.1 | Introduction | 11-1 | ||
11.2 | KSM Sample Preparation Methods and Procedures | 11-1 | ||
11.2.1 | Statement on Sample Preparation Personnel | 11-1 | ||
11.2.2 | Sample Preparation and Dispatch | 11-1 |
Seabridge Gold Inc. | iv | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
11.2.3 | Pre-2012 Analytical Procedures | 11-2 | ||
11.2.4 | Post-2012 Analytical Procedures | 11-3 | ||
11.3 | Summary of the Nature, Extent, and Results of Quality Control Procedures | 11-4 | ||
11.3.1 | Pre-2012 Quality Control Procedures | 11-9 | ||
11.3.2 | Post-2012 Quality Control Procedures | 11-10 | ||
11.4 | QP’s Opinion | 11-10 | ||
12.0 | Data Verification | 12-1 | ||
12.1 | Drill Hole Data Verification | 12-1 | ||
12.1.1 | Assay Verification | 12-1 | ||
12.1.2 | Drill Hole Logs | 12-2 | ||
12.1.3 | Drill Hole Collar Locations | 12-2 | ||
12.1.4 | Down-hole Surveys | 12-3 | ||
12.1.5 | Quality Assurance/Quality Control | 12-3 | ||
12.1.6 | Topographic Data | 12-3 | ||
12.1.7 | Bulk Density Data | 12-4 | ||
12.2 | Post Model Drilling Results | 12-4 | ||
12.3 | Verification that 2016 Prefeasibility Study Remains Current | 12-5 | ||
12.3.1 | Verification Checks on the PFS Mine Quantities | 12-5 | ||
12.3.2 | Verification Checks on Financial Analysis and Cost Estimates | 12-7 | ||
12.4 | QP’s Opinion | 12-8 | ||
12.4.1 | Drill Hole Data Verification | 12-8 | ||
12.4.2 | 2016 Prefeasibility Study Data Verification | 12-8 | ||
13.0 | Mineral Processing and Metallurgical Testing | 13-1 | ||
13.1 | Introduction | 13-1 | ||
13.2 | Summary of Metallurgical Test Programs | 13-3 | ||
13.3 | Summary of Initial Test Work 1989–1991 | 13-5 | ||
13.4 | Summary of Test Work 2007–2016 | 13-5 | ||
13.4.1 | Test Programs | 13-5 | ||
13.4.2 | Baseline Test Process Flowsheet and Conditions | 13-6 | ||
13.4.3 | Mitchell Zone Major Metallurgical Test Results | 13-6 | ||
13.4.4 | Sulphurets Zone Major Metallurgical Test Results | 13-19 | ||
13.4.5 | Upper Kerr Zone Metallurgical Test Results | 13-22 | ||
13.4.6 | Deep Kerr Zone Major Metallurgical Test Results | 13-24 | ||
13.4.7 | Iron Cap Zone Major Metallurgical Test Results | 13-28 | ||
13.5 | Recent Test Work 2017–2020 | 13-34 | ||
13.5.1 | Deep Kerr Zone Metallurgical Test Work (2016/2017) | 13-34 | ||
13.5.2 | Iron Cap Zone Metallurgical Test Work (2017–2020) | 13-43 | ||
13.5.3 | Flotation Concentrate Assay (2007–2020) | 13-53 | ||
13.5.4 | Ancillary Tests | 13-55 | ||
13.6 | Conclusions | 13-60 | ||
13.7 | Metallurgical Performance Projection | 13-61 | ||
13.7.1 | Metallurgical Performance Projection – Mitchell, Sulphurets, Upper Kerr, and Upper Iron Cap | 13-62 | ||
13.7.2 | Metallurgical Performance Projection – Deep Kerr and Lower Iron Cap | 13-65 |
Seabridge Gold Inc. | v | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
14.0 | Mineral Resource Estimates | 14-1 | ||
14.1 | Kerr Deposit | 14-2 | ||
14.1.1 | Grade Distribution – Kerr Deposit | 14-2 | ||
14.1.2 | Assay Grade Capping – Kerr Deposit | 14-4 | ||
14.1.3 | Drill Hole Compositing – Kerr Deposit | 14-6 | ||
14.1.4 | Geologic Constraints - Kerr Deposit | 14-6 | ||
14.1.5 | Variography – Kerr Deposit | 14-6 | ||
14.1.6 | Grade Estimation Parameters – Kerr Deposit | 14-9 | ||
14.1.7 | Grade Model Verification - Kerr Deposit | 14-9 | ||
14.1.8 | Resource Classification – Kerr Deposit | 14-15 | ||
14.2 | Sulphurets Deposit | 14-15 | ||
14.2.1 | Grade Distribution – Sulphurets Deposit | 14-15 | ||
14.2.2 | Assay Grade Capping – Sulphurets Deposit | 14-17 | ||
14.2.3 | Drill Hole Compositing – Sulphurets Deposit | 14-19 | ||
14.2.4 | Geologic Constraints – Sulphurets Deposit | 14-19 | ||
14.2.5 | Variography – Sulphurets Deposit | 14-19 | ||
14.2.6 | Grade Estimation Parameters – Sulphurets Deposit | 14-22 | ||
14.2.7 | Model Validation – Sulphurets Deposit | 14-22 | ||
14.2.8 | Resource Classification – Sulphurets Deposit | 14-28 | ||
14.3 | Mitchell Deposit | 14-28 | ||
14.3.1 | Metal Distribution – Mitchell Deposit | 14-28 | ||
14.3.2 | Assay Grade Capping – Mitchell Deposit | 14-30 | ||
14.3.3 | Drill Hole Compositing – Mitchell Deposit | 14-32 | ||
14.3.4 | Variography – Mitchell Deposit | 14-32 | ||
14.3.5 | Grade Estimation Parameters – Mitchell Deposit | 14-35 | ||
14.3.6 | Grade Model Validation – Mitchell Deposit | 14-35 | ||
14.3.7 | Resource Classification – Mitchell Deposit | 14-41 | ||
14.4 | Iron Cap Deposit | 14-41 | ||
14.4.1 | Grade Distribution – Iron Cap Deposit | 14-41 | ||
14.4.2 | Assay Grade Capping – Iron Cap Deposit | 14-43 | ||
14.4.3 | Drill Hole Compositing – Iron Cap Deposit | 14-45 | ||
14.4.4 | Geologic Constraints – Iron Cap Deposit | 14-45 | ||
14.4.5 | Variography – Iron Cap Deposit | 14-45 | ||
14.4.6 | Grade Estimation Parameters – Iron Cap Deposit | 14-47 | ||
14.4.7 | Grade Model Verification – Iron Cap Deposit | 14-48 | ||
14.4.8 | Resource Classification – Iron Cap Deposit | 14-54 | ||
14.5 | Bulk Density | 14-54 | ||
14.6 | Resource Criteria | 14-54 | ||
14.7 | Summary of KSM Mineral Resources | 14-55 | ||
14.8 | General Discussion | 14-56 | ||
15.0 | Mineral Reserve Estimates | 15-1 | ||
15.1 | Introduction | 15-1 | ||
15.2 | Open Pit Reserve Parameters | 15-1 | ||
15.3 | Underground Mining Reserve Parameters | 15-2 | ||
15.4 | Mineral Reserves | 15-3 |
Seabridge Gold Inc. | vi | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
15.5 | Factors that could affect the mineral reserve estimate | 15-4 | ||
16.0 | Mining Methods | 16-1 | ||
16.1 | Introduction | 16-1 | ||
16.1.1 | Production Rate Consideration | 16-1 | ||
16.2 | Open Pit Mining Operations | 16-1 | ||
16.2.1 | Introduction | 16-1 | ||
16.2.2 | Mining Datum | 16-1 | ||
16.2.3 | Open Pit Production Rate Considerations | 16-2 | ||
16.2.4 | Open Pit Mine Planning 3D Block Model | 16-2 | ||
16.2.5 | Pit Slope Design Angles | 16-4 | ||
16.2.6 | Economic Pit Limits, Pit Designs | 16-9 | ||
16.2.7 | Detailed Pit Designs | 16-14 | ||
16.2.8 | Open Pit Mine Plan | 16-18 | ||
16.2.9 | Open Pit Production | 16-22 | ||
16.2.10 | Open Pit Mine Operations | 16-27 | ||
16.2.11 | Mine Closure and Reclamation | 16-30 | ||
16.2.12 | Open Pit Mine Equipment | 16-30 | ||
16.3 | Underground Mining Operations | 16-35 | ||
16.3.1 | Underground Mine Design Inputs | 16-36 | ||
16.3.2 | Mitchell Underground | 16-38 | ||
16.3.3 | Iron Cap Underground | 16-41 | ||
16.4 | Mine Production Schedule | 16-45 | ||
17.0 | Recovery Methods | 17-1 | ||
17.1 | Introduction | 17-1 | ||
17.2 | Major Process Design Criteria | 17-5 | ||
17.3 | Process Plant Description | 17-7 | ||
17.3.1 | Primary Crushing | 17-7 | ||
17.3.2 | Coarse Ore Transport From Mitchell Site to Treaty Site | 17-8 | ||
17.3.3 | Coarse Material Handling | 17-8 | ||
17.3.4 | Secondary Crushing | 17-9 | ||
17.3.5 | Tertiary Crushing Material Conveyance/Storage | 17-9 | ||
17.3.6 | Tertiary Crushing | 17-9 | ||
17.3.7 | Primary Grinding | 17-10 | ||
17.3.8 | Copper, Gold and Molybdenum Flotation | 17-10 | ||
17.3.9 | Concentrate Dewatering | 17-12 | ||
17.3.10 | Gold Recovery From Gold-bearing Pyrite Products | 17-12 | ||
17.3.11 | Treatment of Leach Residues | 17-14 | ||
17.3.12 | Tailing Management | 17-15 | ||
17.3.13 | Reagents Handling | 17-16 | ||
17.3.14 | Water Supply | 17-17 | ||
17.3.15 | Air Supply | 17-18 | ||
17.3.16 | Assay and Metallurgical Laboratory | 17-18 | ||
17.3.17 | Process Control and Instrumentation | 17-19 | ||
17.4 | Yearly Production Projection | 17-20 |
Seabridge Gold Inc. | vii | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Seabridge Gold Inc. | viii | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Seabridge Gold Inc. | ix | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
20.7.3 | Closure and Reclamation Planning | 20-19 | ||
21.0 | Capital and Operating Cost Estimates | 21-1 | ||
21.1 | Initial Capital Costs | 21-1 | ||
21.1.1 | Exclusions | 21-3 | ||
21.1.2 | Direct Costs | 21-3 | ||
21.1.3 | Indirect Costs | 21-5 | ||
21.1.4 | Owner’s Costs | 21-6 | ||
21.1.5 | Contingency | 21-6 | ||
21.2 | Sustaining Capital Costs | 21-6 | ||
21.2.1 | Mine Site | 21-7 | ||
21.2.2 | Open Pit Mining | 21-7 | ||
21.2.3 | Underground Mining (Block Caves) | 21-7 | ||
21.2.4 | Mine Site Water Treatment | 21-8 | ||
21.2.5 | Process | 21-8 | ||
21.2.6 | Northwest Transmission Line Contribution | 21-9 | ||
21.2.7 | McTagg Diversion Tunnel Mini Hydro Generation Station | 21-9 | ||
21.2.8 | Tailing Management Facility | 21-9 | ||
21.2.9 | Other Sustaining Capital Costs | 21-10 | ||
21.3 | Operating Costs | 21-10 | ||
21.3.1 | Open Pit Mine Operating Costs | 21-12 | ||
21.3.2 | Underground Mining Operating Costs | 21-13 | ||
21.3.3 | Process Operating Costs | 21-14 | ||
21.3.4 | TMF Dam Management Operating Costs | 21-17 | ||
21.3.5 | Mine Site Water Management Costs | 21-17 | ||
21.3.6 | General and Administrative | 21-17 | ||
21.3.7 | Site Services | 21-18 | ||
22.0 | Economic Analysis | 22-1 | ||
22.1 | Introduction | 22-1 | ||
22.2 | Forward-looking Statements | 22-2 | ||
22.3 | Pre-Tax Model | 22-2 | ||
22.3.1 | Financial Evaluations: NPV and IRR | 22-3 | ||
22.3.2 | Metal Price Scenarios | 22-4 | ||
22.4 | Sensitivity Analysis | 22-5 | ||
22.5 | Post-tax Financial Evaluations | 22-7 | ||
22.5.1 | Canadian Federal and BC Provincial Income Tax Regime | 22-7 | ||
22.5.2 | BC Mineral Tax Regime | 22-8 | ||
22.5.3 | Taxes and Post-tax Financial Results | 22-9 | ||
22.6 | Royalties | 22-11 | ||
22.7 | Smelter Terms | 22-11 | ||
22.8 | Miscellaneous Costs and Charges | 22-11 | ||
23.0 | Adjacent Properties | 23-1 | ||
24.0 | Other Relevant Data and Information | 24-1 |
Seabridge Gold Inc. | x | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Seabridge Gold Inc. | xi | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
List of Tables
Table 1.1 | KSM Mineral Resources | 1-11 |
Table 1.2 | Summary of the 2016 PFS Verification Checks | 1-12 |
Table 1.3 | KSM Proven and Probable Reserves as of July 31, 2016 | 1-13 |
Table 1.4 | 2016 PFS Initial Capital Cost Summary | 1-23 |
Table 1.5 | 2016 PFS Average Operating Cost Summary | 1-24 |
Table 1.6 | 2016 PFS Metal Production | 1-26 |
Table 1.7 | 2016 PFS Summary of the Pre- and Post-tax Economic Evaluations | 1-26 |
Table 4.1 | KSM Mineral Claims and Leases | 4-5 |
Table 4.2 | KSM Placer Claims | 4-6 |
Table 4.3 | Seabee/Tina KSM Claims | 4-7 |
Table 6.1 | Exploration Summary of the Kerr Zone | 6-2 |
Table 6.2 | Exploration Summary of the Sulphurets, Mitchell, Iron Cap Zones, and other Exploration Targets | 6-3 |
Table 10.1 | KSM Historic Drilling Through 2019 | 10-2 |
Table 10.2 | Historic Drilling by Company Through 2018 | 10-2 |
Table 10.3 | KSM Drill Hole Summary by Area and Company Through 2018 | 10-3 |
Table 11.1 | ICP Detection Limits – Pre-2012 Data | 11-3 |
Table 11.2 | ICP Detection Limits – Post 2012 | 11-4 |
Table 11.3 | Summary of KSM Control Samples Submitted Thru Time | 11-5 |
Table 11.4 | ¼ Core Duplicate Sample Statistics (2007-2018) | 11-5 |
Table 12.1 | Reserve Assessment Variance Check from 2016 PFS to 2020 Information | 12-6 |
Table 12.2 | Summary of the 2016 PFS Verification Checks | 12-7 |
Table 13.1 | Typical Mineralogical Characteristics and Average Copper-to-Gold Grade Ratios in Planned Mill Feed | 13-1 |
Table 13.2 | Average Ball Mill Grindability and Abrasion Index | 13-2 |
Table 13.3 | Locked Cycle Flotation Test Result Summary | 13-2 |
Table 13.4 | Metallurgical Test Work Programs | 13-3 |
Table 13.5 | Test Samples – Mitchell (2007–2012) | 13-7 |
Table 13.6 | JK SimMet Simulation Results (60,000 t/d SABC Circuit, 2008) | 13-8 |
Table 13.7 | Locked Cycle Test Results – Mitchell | 13-13 |
Table 13.8 | Locked Cycle Test Results – Blended Samples (Mitchell and Other Deposits) | 13-14 |
Table 13.9 | Cu-Mo Separation LCT Results, 2010 | 13-15 |
Table 13.10 | Cyanidation Test Results on LCT Products – Mitchell | 13-16 |
Table 13.11 | Metal Contents of Leach Test Head Samples – Mitchell, 2017 (ALS KM5367) | 13-17 |
Table 13.12 | Metal Contents of Leach Test Head Samples – Mitchell, 2018 (ALS KM5367) | 13-17 |
Table 13.13 | Optimization Cyanidation Test Results – Mitchell 2017 (ALS) | 13-18 |
Table 13.14 | Test Samples – Sulphurets (2009-2012) | 13-20 |
Table 13.15 | LCT Results – Sulphurets | 13-21 |
Table 13.16 | Cyanidation Test Results – Flotation LCT Products, Sulphurets, 2009–2011 | 13-22 |
Table 13.17 | Metal Contents of Composites – Upper Kerr, 2010 (G&T) | 13-23 |
Table 13.18 | LCT Results – Upper Kerr (G&T) | 13-24 |
Table 13.19 | Cyanidation Test Results on LCT Products – Upper Kerr (G&T) | 13-24 |
Table 13.20 | Individual Test Samples – Deep Kerr (2012–2016) | 13-25 |
Table 13.21 | Master Test Samples – Deep Kerr (2012–2016) | 13-25 |
Table 13.22 | Flotation LCT Results – Deep Kerr | 13-27 |
Table 13.23 | Preliminary Cyanidation Test Results – Deep Kerr | 13-28 |
Seabridge Gold Inc. | xii | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Seabridge Gold Inc. | xiii | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Table 16.1 | Major Smelter Terms Used in the NSR Calculation | 16-3 |
Table 16.2 | Metal Prices for Reserve NSR Calculation | 16-3 |
Table 16.3 | Estimated NSP by Mining Area | 16-3 |
Table 16.4 | LG Pit Limit Primary Assumptions | 16-9 |
Table 16.5 | Production Schedule Assumptions | 16-20 |
Table 16.6 | Blasting Assumptions | 16-29 |
Table 16.7 | Major Equipment Requirements | 16-31 |
Table 16.8 | Open Pit Production Drilling Assumptions | 16-31 |
Table 16.9 | Mine Support Equipment Fleet | 16-32 |
Table 16.10 | Open Pit Ancillary Equipment Fleet | 16-33 |
Table 16.11 | Mitchell Block Cave Mineral Reserves ($15/t NSR Shut-off) | 16-38 |
Table 16.12 | Iron Cap Block Cave Reserves ($16/t NSR Shut-off) | 16-42 |
Table 16.13 | Summarized Production Schedule – Open Pit and Underground | 16-46 |
Table 17.1 | Major Design Criteria | 17-5 |
Table 17.2 | Projected Metallurgical Performance | 17-21 |
Table 17.3 | Projected Copper Concentrate Quality | 17-22 |
Table 18.1 | Climate Data for the Mine Site (Sulphurets Creek Climate Station) | 18-8 |
Table 18.2 | Climate Data for the TMF (Teigen Creek Climate Station)1 | 18-11 |
Table 18.3 | Temporary Water Treatment Plant Locations | 18-19 |
Table 18.4 | Annual Reagent Consumption for the HDS WTP | 18-20 |
Table 18.5 | Tailing Dam Summary | 18-24 |
Table 18.6 | KSM Pre-Production Tunnels Summary | 18-32 |
Table 18.7 | KSM Operational Phase Tunnels Summary | 18-33 |
Table 18.8 | Mini Hydro and Energy Recovery Power Generation | 18-54 |
Table 18.9 | Owner’s Key Activities by Year | 18-77 |
Table 19.1 | Benchmark Smelting Terms | 19-2 |
Table 21.1 | Initial Capital Cost Summary | 21-2 |
Table 21.2 | Mine Site Capital Costs | 21-4 |
Table 21.3 | Process-Treaty OPC Capital Cost Estimate | 21-4 |
Table 21.4 | Indirect Capital Costs | 21-5 |
Table 21.5 | Sustaining Capital Costs | 21-6 |
Table 21.6 | Mine Site Sustaining Capital Costs | 21-7 |
Table 21.7 | Operating Cost Summary | 21-11 |
Table 21.8 | Summary of Process Operating Costs by Deposit | 21-15 |
Table 21.9 | Operating Costs per Area of Operation by Deposit | 21-16 |
Table 22.1 | Metal Production from the KSM Mine | 22-2 |
Table 22.2 | Summary of the Pre-tax Economic Evaluations | 22-4 |
Table 22.3 | Component of the Various Taxes for all Scenarios | 22-9 |
Table 22.4 | Summary of Post-tax Financial Results | 22-9 |
Table 22.5 | 2016 PFS Annual Cash Flow for Pre-production Period, Years 1 to 7 and LOM | 22-10 |
Table 23.1 | Pretium Snowfield Mineral Resources Using a 0.30 g/t Cut-off | 23-1 |
Table 25.1 | Summary of Major Pre- and Post-tax Results by Metal Price Scenario | 25-6 |
Seabridge Gold Inc. | xiv | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
List of Figures
Figure 1.1 | Panoramic View of KSM Deposits (Looking East) | 1-1 |
Figure 1.2 | General Location Map | 1-4 |
Figure 1.3 | Geology of the KSM District | 1-6 |
Figure 1.4 | Mitchell Zone Cross Section | 1-8 |
Figure 1.5 | 2016 PFS Mill Feed Production Schedule | 1-14 |
Figure 1.6 | 2016 PFS Open Pit LOM | 1-15 |
Figure 1.7 | 2016 PFS Simplified Process Flow Sheet | 1-17 |
Figure 1.8 | 2016 PFS Sensitivity Analysis of Pre-tax NPV at a 5% Discount Rate | 1-28 |
Figure 1.9 | 2016 PFS Sensitivity Analysis of Pre-tax IRR | 1-28 |
Figure 1.10 | 2016 PFS Sensitivity Analysis of Pre-tax Payback Period | 1-29 |
Figure 4.1 | KSM Mineral Claim Map | 4-3 |
Figure 4.2 | KSM Placer Claim Map | 4-4 |
Figure 7.1 | Geology of the KSM District | 7-2 |
Figure 7.2 | Geological Map of the Kerr Deposit | 7-5 |
Figure 7.3 | Vertical E-W Section through the Kerr Deposit, at 6,258,650N | 7-6 |
Figure 7.4 | Vertical E-W Section through the Kerr Deposit, at 6,259,650N | 7-7 |
Figure 7.5 | Map of the Sulphurets Deposit | 7-10 |
Figure 7.6 | Vertical Cross-Section through the Sulphurets Deposit, Looking ENE | 7-11 |
Figure 7.7 | Vertical Cross-Section through the Sulphurets Deposit, Looking NNE | 7-12 |
Figure 7.8 | Geology Map of the Mitchell Deposit | 7-15 |
Figure 7.9 | Vertical Section through the Mitchell Deposit | 7-16 |
Figure 7.10 | Plan View of the Mitchell Deposit at 500 masl | 7-17 |
Figure 7.11 | Iron Cap Geology Map | 7-20 |
Figure 7.12 | Vertical Cross-Section through the Iron Cap Deposit, Looking NNE | 7-21 |
Figure 7.13 | Plan View Through the Iron Cap Deposit at 1200 m Elevation | 7-22 |
Figure 10.1 | KSM Drill Hole Locations | 10-5 |
Figure 10.2 | Drill Hole Locations – Kerr Deposit | 10-6 |
Figure 10.3 | Drill Hole Locations – Sulphurets Deposit | 10-7 |
Figure 10.4 | Drill Hole Locations – Mitchell Deposit | 10-8 |
Figure 10.5 | Drill Hole Locations – Iron Cap Deposit | 10-9 |
Figure 11.1 | Duplicate Sample Box Plots | 11-6 |
Figure 11.2 | Gold Duplicate Sample Graphs | 11-7 |
Figure 11.3 | Copper Duplicate Sample Graphs | 11-8 |
Figure 13.1 | Copper and Gold Open Cycle Flotation Variability Test Results (KM2153) | 13-9 |
Figure 13.2 | Copper Open Cycle Flotation Performance vs Copper Head Grade at a Concentrate Grade of 25% Copper (KM2153) | 13-10 |
Figure 13.3 | Flotation Performance – Open Circuit Flotation Tests, Mitchell (KM2153) | 13-11 |
Figure 13.4 | Copper Recovery vs. Copper Feed – Open Cleaner Circuit Tests (KM2153) | 13-11 |
Figure 13.5 | Leaching Test Results – Mitchell 2017 and 2018 (ALS KM5455) | 13-19 |
Figure 13.6 | Variability Test Results – Copper – Iron Cap, 2015 (ALS) – KM4672 | 13-31 |
Figure 13.7 | Variability Test Results – Gold – Iron Cap, 2015 (ALS) – KM4672 | 13-31 |
Figure 13.8 | Copper Recovery vs. Rougher Mass Recovery and Grind Size – Iron Cap, 2015 (ALS) – KM4672 | 13-32 |
Figure 13.9 | Gold Recovery vs. Rougher Mass Recovery and Grind Size – Iron Cap, 2015 (ALS) – KM4672 | 13-32 |
Figure 13.10 | KM5063 Copper Sulphides Liberation – Mitchell and Deep Kerr 2017 (ALS) | 13-37 |
Figure 13.11 | KM5266 Copper Sulphides Liberation – Deep Kerr 2017 (ALS) | 13-38 |
Seabridge Gold Inc. | xv | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 13.12 | KM5063 and KM5266 Open Circuit Flotation Flowsheet –Deep Kerr 2016/2017 (ALS) | 13-39 |
Figure 13.13 | KM5063 and KM5266 LCT Flotation Flowsheet – Deep Kerr 2016/2017 (ALS) | 13-40 |
Figure 13.14 | Effect of Slurry Solid Density and Primary Grind Size _ Rougher Flotation _ Copper – KM6004 | 13-47 |
Figure 13.15 | Effect of Slurry Solid Density and Primary Grind Size _ Rougher Flotation _ Gold – KM6004 | 13-48 |
Figure 13.16 | LCT Flotation Flowsheet – Iron Cap (2017 – 2020 ALS) | 13-48 |
Figure 13.17 | Gold Recovery Flowsheet | 13-51 |
Figure 14.1 | Gold-Copper Probability Plots – Kerr Deposit | 14-5 |
Figure 14.2 | Down-hole Grade Correlograms – Kerr Deposit | 14-7 |
Figure 14.3 | Directional Grade Correlograms – Kerr Deposit | 14-8 |
Figure 14.4 | Kerr Cross Section 6,259,650 N. – Gold | 14-10 |
Figure 14.5 | Kerr Cross Section 6,259,650 N. – Copper | 14-11 |
Figure 14.6 | Kerr 850 m Level Plan – Gold | 14-12 |
Figure 14.7 | Kerr 850 m Level Plan - Copper | 14-13 |
Figure 14.8 | Kerr Gold-Copper Swath Plots by Elevation | 14-14 |
Figure 14.9 | Gold-Copper Probability Plots – Sulphurets Deposit | 14-18 |
Figure 14.10 | Down-hole Grade Correlograms – Sulphurets Deposit | 14-20 |
Figure 14.11 | Directional Grade Correlograms – Sulphurets Deposit | 14-21 |
Figure 14.12 | Sulphurets Cross Section 20 - Gold | 14-23 |
Figure 14.13 | Sulphurets Cross Section 20 – Copper | 14-24 |
Figure 14.14 | Sulphurets 1135m Level Plan - Gold | 14-25 |
Figure 14.15 | Sulpurets 1135 m Level Plan – Copper | 14-26 |
Figure 14.16 | Sulphurets Gold-Copper Swath Plots by Elevation | 14-27 |
Figure 14.17 | Gold-Copper Cumulative Probability Plots – Mitchell Deposit | 14-31 |
Figure 14.18 | Down-hole Grade Correlograms – Mitchell Deposit | 14-33 |
Figure 14.19 | Directional Grade Correlograms – Mitchell Deposit | 14-34 |
Figure 14.20 | Mitchell Cross Section 11 - Gold | 14-36 |
Figure 14.21 | Mitchell Cross Section 11 - Copper | 14-37 |
Figure 14.22 | Mitchell760 m Level Plan - Gold | 14-38 |
Figure 14.23 | Mitchell 760 m Level Plan - Copper | 14-39 |
Figure 14.24 | Mitchell Swath Plots by Elevation | 14-40 |
Figure 14.25 | Gold-Copper Cumulative Probability Plots – Iron Cap Deposit | 14-44 |
Figure 14.26 | Down-hole Grade Correlograms – Iron Cap Deposit | 14-46 |
Figure 14.27 | Directional Grade Correlograms – Iron Cap Deposit | 14-47 |
Figure 14.28 | Iron Cap Cross Section 12 – Gold | 14-49 |
Figure 14.29 | Iron Cap Cross Section 12 – Copper | 14-50 |
Figure 14.30 | Iron Cap 1200 m Level Plan – Gold | 14-51 |
Figure 14.31 | Iron Cap 1200 m Level Plan – Copper | 14-52 |
Figure 14.32 | Iron Cap Gold-Copper Swath Plots by Elevation | 14-53 |
Figure 16.1 | Mitchell Sensitivity of Ore Tonnes to Pit Size | 16-10 |
Figure 16.2 | Sulphurets Sensitivity of Ore Tonnes to Pit Size | 16-11 |
Figure 16.3 | Kerr Sensitivity of Ore Tonnes to Pit Slope and Pit Size | 16-11 |
Figure 16.4 | Plan View of the KSM LG Pit Limits | 16-12 |
Figure 16.5 | Mitchell Open/Underground Pit and Economic Pit Limit – North-South Section at East 422950, Viewed from the East | 16-13 |
Figure 16.6 | Sulphurets Economic Pit Limit – North-South Section at East 421725, Viewed from the East | 16-13 |
Figure 16.7 | Kerr Economic Pit Limit – East-West Section at North 6258800, Viewed from the South | 16-14 |
Seabridge Gold Inc. | xvi | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 16.8 | Plan View of Mitchell Pit Phases | 16-16 |
Figure 16.9 | Plan View of Sulphurets Pit Phases | 16-17 |
Figure 16.10 | Plan View of Kerr Pit Phases | 16-18 |
Figure 16.11 | End of Pre-production (Year -1) | 16-24 |
Figure 16.12 | End of Year 5 | 16-25 |
Figure 16.13 | Open Pit Life of Mine | 16-26 |
Figure 16.14 | Plan View of the Mitchell and Iron Cap Block Cave Mines | 16-35 |
Figure 16.15 | Section View of the Mitchell and Iron Cap Block Cave Mines (Looking North) | 16-36 |
Figure 16.16 | Section View of the Mitchell Block Cave Mine Design (Looking South) | 16-39 |
Figure 16.17 | Mitchell Block Cave Mine Development and Production Schedules | 16-41 |
Figure 16.18 | Section Looking East of the Iron Cap block Cave Mine Design | 16-43 |
Figure 16.19 | Iron Cap Block Cave Mine Development and Production Schedules | 16-45 |
Figure 16.20 | KSM Mill Feed Production Schedule | 16-47 |
Figure 17.1 | Simplified Process Flowsheet | 17-2 |
Figure 17.2 | Treaty Process Plant Layout | 17-6 |
Figure 18.1 | Mine Site Layout after Initial Construction | 18-2 |
Figure 18.2 | Ultimate TMF Layout | 18-3 |
Figure 18.3 | Mine Site Mapped Geology | 18-6 |
Figure 18.4 | Mine Site Ultimate Water Management Facilities | 18-13 |
Figure 18.5 | Mine Site Monthly Water Treatment Rate | 18-15 |
Figure 18.6 | Water Storage Dam Sections | 18-17 |
Figure 18.7 | TMF Staging Plan | 18-22 |
Figure 18.8 | North Tailing Dam | 18-25 |
Figure 18.9 | Saddle and Splitter Tailing Dams | 18-26 |
Figure 18.10 | Southeast Tailing Dam | 18-27 |
Figure 18.11 | Schematic TMF Water Cycle | 18-29 |
Figure 18.12 | Ultimate TMF with Catchments and Diversion Channels | 18-31 |
Figure 18.13 | MTT Dual Track Plan View (Distances in Metres) | 18-37 |
Figure 18.14 | MTT Train Transport Drift Section (Dimensions in Millimeters) | 18-38 |
Figure 18.15 | Treaty Personnel, Freight, and Fuel Staging and Marshalling | 18-40 |
Figure 18.16 | Mitchell Personnel, Freight, and Fuel Staging and Marshalling | 18-41 |
Figure 18.17 | Mine Site Roads | 18-42 |
Figure 18.18 | NTL Route Map | 18-47 |
Figure 18.19 | Proposed Access Roads Network | 18-58 |
Figure 18.20 | Proposed Winter Glacier Access Route | 18-62 |
Figure 18.21 | Construction Schedule Summary (Level 1) | 18-71 |
Figure 18.22 | EPCM Organizational Chart | 18-73 |
Figure 20.1 | KSM Mine Site Water Management Schematic | 20-12 |
Figure 21.1 | Operating Cost Distribution | 21-11 |
Figure 21.2 | LOM Average Unit Operating Cost for Open Pit Mining (US$/t Material Mined) | 21-13 |
Figure 22.1 | Pre-tax Undiscounted Annual and Cumulative Cash Flow | 22-4 |
Figure 22.2 | Sensitivity Analysis of Pre-tax NPV at a 5% Discount Rate | 22-6 |
Figure 22.3 | Sensitivity Analysis of Pre-tax IRR | 22-6 |
Figure 22.4 | Sensitivity Analysis of Pre-tax Payback Period | 22-7 |
Seabridge Gold Inc. | xvii | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Glossary
Units of Measure
ampere | A |
annum (year) | a |
bank cubic metres | bcm |
billion tonnes | Bt |
billion | B |
centimetre | cm |
Coefficients of Variation | CVs |
cubic centimetre | cm3 |
cubic kilometre | km3 |
cubic metre | m3 |
day | d |
days per week | d/wk |
days per annum (year) | d/a |
dead weight tonnes | DWT |
degree | ° |
degrees Celsius | °C |
diameter | ø |
dollar (American) | US$ |
dollar (Canadian) | Cdn$ |
dry metric tonne | dmt |
foot | ft |
gallon | gal |
gallons per minute (US) | gpm |
gigawatt hours | Gwh |
gigawatt | GW |
gram | g |
grams per cubic centimetre | g/cc |
grams per litre | g/L |
grams per tonne | g/t |
gravitational constant | g |
greater than | > |
hectare | ha |
hertz | Hz |
horsepower | hp |
hour | h |
hours per day | h/d |
Seabridge Gold Inc. | xviii | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
hours per week | h/wk |
hours per annum (year) | h/a |
inch | in |
kilo (thousand) | k |
kilogram | kg |
kilograms per cubic metre | kg/m3 |
kilograms per day | kg/d |
kilograms per hour | kg/h |
kilograms per square metre | kg/m2 |
kilometre | km |
kilometres per hour | km/h |
kilonewton | kN |
kilopascal | kPa |
kilotonne | kt |
kilovolt | kV |
kilowatt hour | kWh |
kilowatt hours per tonne | kWh/t |
kilowatt hours per annum (year) | kWh/a |
kilowatt | kW |
less than | < |
litre | L |
litres per hour | L/h |
litres per second | L/s |
megaannum (million years) | Ma |
megavolt-ampere | MVA |
megawatt | MW |
metre | m |
metres above sea level | masl |
metres per second | m/s |
metres per annum (year) | m/a |
microns | µm |
milligram | mg |
milligrams per litre | mg/L |
millilitre | mL |
millimetre | mm |
million | M |
million tonnes | Mt |
minute (plane angle) | ' |
minute (time) | min |
month | mo |
Ohm-metre | Wm |
ounce | oz |
Seabridge Gold Inc. | xix | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
ounce per tonne | oz/t |
parts per billion | ppb |
parts per million | ppm |
pascal | Pa |
percent | % |
pound(s) | lb |
pound(s) per square inch | psi |
revolutions per minute | rpm |
second (plane angle) | " |
second (time) | s |
specific gravity | SG |
square centimetre | cm2 |
square kilometre | km2 |
square metre | m2 |
square millimetre | mm2 |
three-dimensional | 3D |
tonne (1,000 kg) (metric ton) | t |
tonnes per day | t/d |
tonnes per hour | t/h |
tonnes per annum (year) | t/a |
troy ounce | troy oz |
volt | V |
week | wk |
weight/weight | w/w |
wet metric ton | wmt |
Abbreviations and Acronyms | |
AACE® International | AACE® |
abrasion index | Ai |
acid rock drainage | ARD |
Acid-base accounting | ABA |
acidification, volatilization of hydrogen cyanide gas, and re-neutralization | AVR |
Acoustic Televiewer | ATV |
Application Information Requirements | AIR |
ALS Canada Ltd. | ALS |
alternating current | AC |
aluminum oxide | Al2O3 |
American Institute of Professional Geologists | AIPG |
American National Standards Institute | ANSI |
ammonium nitrate-fuel oil | ANFO |
antimony | Sb |
Seabridge Gold Inc. | xx | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Aquatic Effects Monitoring Program | AEMP |
arsenic | As |
atomic absorption spectrometry | AAS |
atomic absorption | AA |
atomic emission spectroscopy | AES |
audio magneto telluric | AMT |
ball mill work index | BMWi |
Barrick Gold Corp. | Barrick |
Basal Shear Fault | BSF |
Basal Shear Zone | BSZ |
BC Environmental Assessment Act | BCEAA |
BC Mineral Inventory | Minfile |
best applicable practices | BAP |
best available technology | BAT |
best available tailings technology | BATT |
BGC Engineering Inc. | BGC |
Biogeoclimatic Ecosystem Classification | BEC |
BioteQ Environmental Technologies Inc. | BioteQ |
bismuth | Bi |
British Columbia | BC |
British Columbia Environmental Assessment Office | BCEAO |
British Columbia Utilities Commission | BCUC |
Bulk Mineral Analysis with Liberation | BMAL |
bulk mineral analysis | BMA |
cadmium | Cd |
calcium oxide | CaO |
California Air Resources Board | CARB |
Canadian Dam Association | CDA |
Canadian Development Expense | CDE |
Canadian Environmental Assessment | CEA |
Canadian Environmental Assessment Act | CEAA |
Canadian Exploration Expense | CEE |
Canadian Institute of Mining, Metallurgy and Petroleum | CIM |
Canadian National Railroad | CNR |
Capital Cost Allowance | CCA |
carbon-in-leach | CIL |
carboxymethyl cellulose | CMC |
Caro’s acid | H2SO5 |
CDN Resource Laboratories Ltd. | CDN Resource |
chalcopyrite | Cp |
chlorine | Cl |
closed-circuit television | CCTV |
Seabridge Gold Inc. | xxi | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
coarse ore stockpile | COS |
cobalt | Co |
common voltage reference | CVR |
comparative work index | CWi |
Construction Diversion Tunnel | CDT |
conventional counter-current decantation | CCD |
copper | Cu |
copper sulphate | CuSO4 |
cost breakdown structure | CBS |
Cost, Insurance and Freight – Free Out | CIF-FO |
Coulter Creek Access Road | CCAR |
counter current decantation | CCD |
cross-linked polyethylene | XLPE |
Cumulative Tax Credit Account | CTCA |
Deep Kerr | DK |
Delegation of Authority Guideline | DOAG |
Demand Side Management | DSM |
direct current | DC |
direct cyanide leaching | DCN |
discounted cash flow | DCF |
Distributed Control System | DCS |
east | E |
EBC Inc. | EBC |
economic, social, and cultural impact assessment | ESCIA |
effective grinding length | EGL |
Electricity Supply Agreement | ESA |
electromagnetic | EM |
emergency medical technician | EMT |
engineering, procurement, construction management | EPCM |
environmental assessment | EA |
Environmental Design Flood | EDF |
Environmental Effects Monitoring | EEM |
environmental impact statement | EIS |
Environmental Management System | EMS |
ERM Consultants Canada Inc. | ERM |
Esso Minerals Canada Ltd | Esso Minerals |
Factor of Safety | FOS |
Feasibility Study | FS |
Fisheries and Oceans Canada | DFO |
fluorine | F |
Footprint Finder | FF |
Free Carrier | FCA |
Seabridge Gold Inc. | xxii | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
front-end loader | FEL |
G&T Metallurgical Services Ltd. | G&T |
galena | Gn |
gas insulated | GIS |
general and administrative | G&A |
general mine expense | GME |
Global Climatic Models | GCMs |
global positioning system | GPS |
gold | Au |
gold equivalent | AuEQ |
Golder Associates Ltd. | Golder |
Goods and Services Tax | GST |
Granduc Mines Ltd. | Granduc |
Granmac Services Ltd. | Granmac |
greenhouse gas | GHG |
gross vehicle weight | GVW |
Ground Penetrating Radar | GPR |
harmful alteration, disruption or destruction | HADD |
Harmonized Sales Tax | HST |
Hazelton Volcanics | HV |
Hazen Research Inc. | Hazen |
health, safety and security | HS&S |
heating, ventilation, and air conditioning | HVAC |
height of draw | HOD |
hematite | He |
high-density polyethylene | HDPE |
high-density sludge | HDS |
high-pressure grinding roll | HPGR |
hydrochloric acid | HCl |
hydrogen peroxide | H2O2 |
Impact Benefits Agreement | IBA |
Independent Geotechnical Review Board | IGRB |
Independent Power Producer | IPP |
induced polarization | IP |
inductively coupled plasma | ICP |
Inflow Design Flood | IDF |
Input Tax Credit | ITC |
internal rate of return | IRR |
International Electrotechnical Commission | IEC |
International Organization for Standardization | ISO |
inter-ramp angle | IRA |
inter-ramp height | IRH |
Seabridge Gold Inc. | xxiii | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
inverse distance weighting | IDW |
Iron Cap Fault | ICF |
iron | Fe |
Joint Health and Safety Committee | JHSC |
joint venture | JV |
Kerr-Sulphurets-Mitchell | KSM |
KSM Mining ULC | KSM Mining |
Klohn Crippen Berger Ltd. | KCB |
Köeppern Machinery Australia Pty Ltd. | Köeppern |
Lambert Civil Consulting Ltd. | LCC |
Land Resource Management Plan | LRMP |
lead | Pb |
Lerchs-Grossmann | LG |
life-of-mine | LOM |
Light Detection and Ranging | LIDAR |
Lilburn & Associates LLC | Lilburn |
linear low-density polyethylene | LLDPE |
liquefied natural gas | LNG |
liquefied petroleum gas | LPG |
load factor | LF |
load-haul-dump | LHD |
local study area | LSA |
locked cycle tests | LCT |
magnesium oxide | MgO |
magnetite | Ma |
magneto telluric | MT |
maintenance and repair contracts | MARC |
manganese oxide | MnO |
material take-off | MTO |
McElhanney Consulting Services Inc. | McElhanney |
McTagg Diversion Tunnels | MTDT |
mercury | Hg |
metabisulphite | MBS |
Metal and Diamond Mining Effluent Regulations | MDMER |
metal leaching | ML |
Metal Mining Effluent Regulations | MMER |
Methyl isobutyl carbinol | MIBC |
Metso Minerals Industries Inc. | Metso |
mineral titles online. | MTO |
Mining Rock Mass Rating | MRMR |
Ministry of Energy and Mines | MEM |
Ministry of Energy, Mines and Natural Gas | MEMNG |
Ministry of Energy, Mines and Petroleum Resources | MEMPR |
Seabridge Gold Inc. | xxiv | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Ministry of Environment | MOE |
Ministry of Forests | MOF |
Ministry of Forests, Lands and Natural Resource Operations | MFLNRO |
Ministry of Forests, Lands and Natural Resource Operations Road Division | MFLNRORD |
Ministry of Transportation and Infrastructure | MOTI |
Mitchell Diversion Tunnel | MDT |
Mitchell Thrust Fault | MTF |
Mitchell Valley Drainage Tunnel | MVDT |
Mitchell-Treaty Twinned Tunnels | MTT |
molybdenum | Mo |
Moose Mountain Technical Services | MMTS |
motor control centre | MCC |
Multiple Accounts Analysis | MAA |
Multiple Pulse in Air | MPiA |
Municipal Wastewater Regulation | MWR |
Nass Timber Supply Area | Nass TSA |
Nass Wildlife Area | NWA |
National Ambient Air Quality Objectives | NAAQOs |
National Instrument 43-101 | NI 43-101 |
nearest neighbor | NN |
Neil S. Seldon & Associates Ltd. | NSA |
net cash flow | NCF |
net present value | NPV |
net smelter price | NSP |
net smelter return | NSR |
Newhawk Gold Mines Ltd. | Newhawk |
Newmont Exploration of Canada Ltd. | Newmont |
nickel | Ni |
Nisga’a Final Agreement | NFA |
Nisga’a Lisims Government | NLG |
no net loss | NNL |
non-potentially acid generating | NPAG |
Nordic Minesteel Technologies Inc. | NMT |
North American Datum | NAD |
North Pit Wall Dewatering Adit | NPWDA |
North Treaty Access Road | NTAR |
north | N |
Northwest Fault | NWF |
Northwest Transmission Line | NTL |
Operator Interface Stations | OIS |
Ore Control System | OCS |
Ore Preparation Complex | OPC |
Seabridge Gold Inc. | xxv | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
peak ground acceleration | PGA |
personal protective equipment | PPE |
Phelps Dodge Corp. | Phelps Dodge |
phosphorus | P |
pit slope angle | PSA |
Placer Dome | Placer |
Pocock Industrial Inc. | Pocock |
point of delivery | POD |
potassium amyl xanthate | PAX |
potentially acid generating | PAG |
Prefeasibility Study | PFS |
Preliminary Economic Assessment | PEA |
Pretium Resources Inc. | Pretium |
PricewaterhouseCoopers | PwC |
prilled ammonium | AN Prill |
probable maximum flood | PMF |
Probable Maximum Precipitation | PMP |
Process Control System | PCS |
Process Tailing and Management Area | PTMA |
programmable logic controller | PLC |
Provincial Sales Tax | PST |
pyrite | Py |
Qualified Person | QP |
quality assurance | QA |
quality control | QC |
quantile-quantile | |
Quantitative Evaluation of Minerals by Scanning | QEMSCAN® |
quartz vein fragments | QABX |
Raewyn Copper | RC |
Raewyn fault | RF |
Rate Design Application | RDA |
real-time kinematic | RTK |
regional study area | RSA |
regulation | Reg. |
request for information | RFI |
Resource Management Zone | RMZ |
Resource Modelling Inc. | RMI |
reverse osmosis | RO |
Revised Statutes of British Columbia | RSBC |
rhenium | Re |
rock quality designation | RQD |
Rock Storage Facility | RSF |
rotations per minute | RPM |
Seabridge Gold Inc. | xxvi | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Seabridge Gold Inc. | xxvii | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
time domain electromagnetic | TDEM |
total sulphur | ST |
total suspended sediments | TSS |
treatment charge/refining charge | TC/RC |
Treaty Creek Access Road | TCAR |
tunnel support classes | TSC |
ultra-high frequency | UHF |
undercut | UC |
Uniform Hazard Response Spectra | UHRS |
Universal Transverse Mercator | UTM |
University of British Columbia | UBC |
Unlimited Liability Corporation | ULC |
valued component | VC |
Voice over Internet Protocol | VoIP |
Water Storage Dam | WSD |
Water Storage Facility | WSF |
Water Treatment Plant | WTP |
weak acid dissociable | WAD |
west | W |
WN Brazier Associates Inc. | Brazier |
Wood Canada Ltd. | Wood |
work breakdown structure | WBS |
work index | Wi |
x-ray fluorescence | XRF |
Z-Axis Tipper Electromagnetic | ZTEM |
zinc | Zn |
Seabridge Gold Inc. | xxviii | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
1.0 | Summary |
1.1 | Introduction |
Seabridge Gold Inc.’s (Seabridge) Kerr-Sulphurets-Mitchell (KSM) Property (the Property) involves the development of major gold-copper deposits located in northwest British Columbia (BC) off Highway 37, approximately 65 km by air north-northwest of the ice free Port of Stewart, BC. The Property is situated within the coastal mountains of BC, approximately 30 km topographically upgradient of the Alaska-BC border. KSM is one of the few undeveloped projects in the world that has received its environmental approvals, these having been granted by both the Government of Canada and the Government of BC. KSM includes four major mineralized zones, identified as the Mitchell, Kerr, Sulphurets, and Iron Cap deposits. The deposits contain significant gold, copper, silver, and molybdenum mineralization. Figure 1.1 is a panoramic view looking east towards the aforementioned deposits.
Figure 1.1 Panoramic View of KSM Deposits (Looking East)
In conjunction with the environmental approvals, Seabridge also received early-stage construction permits for KSM from the Province of BC in September 2014. The permits issued include:
● | authority to construct and use roadways along Coulter Creek and Treaty Creek |
● | rights-of-way for the proposed Mitchell-Treaty Twinned Tunnel (MTT) alignment connecting KSM facilities |
● | permits for constructing and operating various camps required to support construction activities |
● | permits authorizing early-stage construction activities at the mine site and Tailings Management Facility (TMF). |
Seabridge also received permits from the BC Government in October 2016, which allows the construction of an exploration adit to explore mineralization associated with the Deep Kerr deposit.
Seabridge Gold Inc. | 1-1 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
The results of the economic analyses for the 2016 PFS represent forward-looking information that is subject to a number of known and unknown risks, uncertainties and other factors that may cause actual results to differ materially from those presented in this Report. Forward-looking statements in this report include, but are not limited to, statements with respect to future metal prices, the estimation of Mineral Resources and Mineral Reserves, the estimated mine production and metals recovered, the estimated capital and operating costs, and the estimated cash flows generated from the planned mine production for the different development options. The material factors or assumptions used to develop the forward-looking information are identified in the relevant sections of this Report.
1.2 | Key Study Outcomes |
The results of the 2016 PFS remain valid and represent a viable option for developing KSM; however should not be considered a preferred development option. Additional technical work will be done before KSM arrives at its preferred development option. This 2016 PFS was prepared under the direction of Tetra Tech, Inc. (Tetra Tech), for Seabridge in 2016. The Qualified Persons (QPs) of this Report have verified that the 2016 PFS remains current and is suitable to be included unchanged in this Report. The 2016 PFS consists of work produced by Tetra Tech and the following independent consultants:
● | Moose Mountain Technical Services (MMTS) |
● | Golder Associates Ltd. (Golder) |
● | McElhanney Consulting Services Ltd. (McElhanney) |
● | BGC Engineering Inc. (BGC) |
● | Resource Modeling Inc. (RMI) |
● | Klohn Crippen Berger Ltd. (KCB) |
● | ERM Consultants Canada Ltd. (ERM) |
● | WN Brazier Associates Inc. (Brazier). |
The 2016 PFS envisaged a combined open pit/underground block caving mining operation that is scheduled to operate for 53 years. During the initial 33 years of mine life, the majority of ore would be derived from open pit mines, with the tail end of this period supplemented by the initial development of underground block cave mines. Ore delivery to the mill during Year 2 to Year 35 is designed to be maintained at an average of 130,000 t/d. After depletion of the open pits, the mill processing rate would be reduced to just over 95,000 t/d for 10 additional years before ramping down to just over 60,000 t/d for the remaining few years of stockpile reclaim at the end of the mine life. Over the entire 53-year mine life, ore would be fed to a flotation and gold extraction mill. The flotation plant would produce a gold/copper/silver concentrate for transport by truck to the nearby sea port for shipment to Pacific Rim smelters. Extensive metallurgical testing confirms that KSM can produce a clean concentrate with an average copper grade of 25% with a high gold and silver content, making it readily saleable. A separate molybdenum concentrate and gold-silver doré would also be produced at the KSM processing facility.
Seabridge Gold Inc. | 1-2 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
All dollar figures presented in this report are stated in US dollars, unless otherwise specified. The 2016 PFS concluded:
● | the estimated Proven and Probable Mineral Reserves as of July 31, 2016 are 38.8 Moz of gold and 10.2 Blb of copper (2.2 Bt at an average grade of 0.55 g/t gold and 0.21% copper per tonne). |
● | projected initial capital costs are US$5.0 billion and sustaining capital costs are US$5.5 billion estimated to a +25%/-10% level of accuracy and incorporate substantial enhancements to meet environmental improvements that were committed to in the environmental assessment (EA) review process |
● | the 2016 Base Case after-tax NPV at a 5% discount rate is US$1.5 billion with an IRR of 8% and payback period is approximately 6.8 years of a 53-year operating mine life, using three-year average price assumptions of US$1,230.00/oz gold, US$2.75/lb copper, US$17.75/oz silver, US$8.49/lb molybdenum and a foreign exchange rate of US$0.80 per Cdn$1.00 |
● | overall, the 2016 PFS confirmed that KSM is an economic project with an unusually long life in a low-risk jurisdiction. |
1.3 | Property Description and Location |
The Property is located in the coastal mountains of northwest BC at a latitude and longitude of approximately 56.50° north (N) and 130.30° west (W), respectively. The Property is situated approximately 950 km northwest of Vancouver, BC; 65 km by air north-northwest of Stewart, BC; and 21 km south-southeast of the former Eskay Creek Mine. The proposed pit areas lie within the headwaters of Sulphurets Creek, which is a tributary of the Unuk River, which flows into the Pacific Ocean through Alaska. The proposed TMF will be located within the tributaries of Teigen and Treaty creeks. The Teigen and Treaty creeks are tributaries of the Bell-Irving River, which is itself a major tributary of the Nass River. The Nass River also flows to the Pacific Ocean through the northwestern portion of British Columbia, entirely within Canadian jurisdiction. Figure 1.2 is a general location map of the Property.
The Property comprises four discrete claim blocks. The claim blocks are referred to as:
● | the KSM claims |
● | the Seabee claims |
● | the Tina claims |
● | the Treaty Creek Switching Station claims |
The four KSM claim blocks include 79 mineral claims (cell and legacy) and 2 mining leases with a combined area of 40,784.97 ha. There are also 17 KSM placer claims held by KSM Mining ULC covering part of the KSM claims. The placer claims secure rights in a historically designated placer district. The Claim Group Inc. (TCG) acts as agent on behalf of Seabridge with respect to maintaining all pertinent records associated with the Property tenures. All claims and leases are in good standing under the Mining Tenure Act of BC and are recorded as owned 100% by KSM Mining ULC, a wholly owned subsidiary of Seabridge.
Annual holding costs for all leases and claims vary by year depending on whether the fees are paid in cash or the value of work completed on developing the claims is used in lieu of a cash payment. Over the next five years, the annual cash holding costs to keep the claims and leases valid range between Cdn$450,000 to Cdn$970,000. Those estimated costs can be reduced significantly if work expenditures are applied in lieu of cash fees. No additional permits are required to address the recommendations in this report; part of the expenditures for that work can be applied in lieu of cash fees. Seabridge believes they have addressed all issues to secure access, mineral title, and ability to perform work on the property and are not aware of any risks, other than those identified in this Report, that could materially affect proposed work plans.
Seabridge Gold Inc. | 1-3 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 1.2 General Location Map
Source: ERM (2012)
Seabridge Gold Inc. | 1-4 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
1.4 | Accessibility, Climate, Local Resources, Physiography and Infrastructure |
The Property lies within the rugged coastal mountains of northwestern BC, with elevations ranging from 520 m in Sulphurets Creek Valley, to over 2,300 m at the highest peaks.
There are multiple deep-water loading facilities for shipping bulk mineral concentrates located in the ice free Port of Stewart, BC. Those port facilities are currently used by the Red Chris Mine. The nearest railway is the Canadian National Railroad (CNR) Yellowhead route, which is located approximately 220 km southeast of the Property. This line runs east-west, and can deliver concentrate to deep water ports near Prince Rupert and Vancouver, BC.
The Property and its access routes are on Crown land; therefore, surface and access rights are granted under, and subject to compliance with, the Mineral Tenure Act or the Land Act or, at the discretion of the Crown, under the Mining Right of Way Act.
The closest power transmission lines, the Northwest Transmission Line (NTL), run along the Highway 37 corridor up to the Red Chris Mine. The Red Chris Mine is approximately 120 km north of KSM, whereas the NTL is less than 15 km east of KSM or approximately 30 km away from the Treaty OPC by way of the proposed Treaty Creek Access Road (TCAR).
1.5 | Geological Setting And Mineralization |
The Property lies within “Stikinia”, a long-lived volcanic island-arc terrane that was accreted onto the Paleozoic basement of the North American continental margin in the Middle Jurassic.
Early Jurassic sub-volcanic intrusive complexes are common in the Stikinia terrane, and several host well-known precious- and base-metal-rich hydrothermal systems. These include copper-gold porphyry zones such as Galore Creek, Red Chris, Kemess, Mt. Milligan, and KSM. The geology of the KSM District is shown in Figure 1.3.
Seabridge Gold Inc. | 1-5 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 1.3 Geology of the KSM District
Source: Seabridge (2019)
Seabridge Gold Inc. | 1-6 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
The Kerr deposit is centered on an Early Jurassic, north-south trending, steep westerly dipping tabular intrusive complex. Drilling demonstrates that the recognized mineralized system has an overall strike extent of 2,400 m, a width of approximately 800 m, and a vertical extent of at least 2,200 m. Deep drilling since 2012 has identified two sub-parallel, north-south trending, steep west-dipping mineralized zones approximately 1,700 m long that appear to coalesce near the topographic surface. The west limb is up to 500 m thick, while the east limb is up to 300 m thick. After significant deep drilling was completed at the Kerr deposit, an updated geological interpretation and subsequent updated Mineral Resource model were completed. That new model forms the basis for the 2019 Mineral Resources and Mineral Reserves. Approximately 223 diamond core holes totaling about 85,000 m of drilling data were used to construct the Kerr block model used for this Report.
Sulphurets is a structurally complex deposit intersected by numerous east-vergent faults associated with the mid-Cretaceous Skeena fold and thrust belt. The deposit is composed of stacked thrust fault panels made up of Upper Triassic Stuhini Group and Lower Jurassic Hazelton Group volcano-sedimentary strata that are intruded by a number of dykes and stocks. The majority of mineralization occurs in the “Lower Panel”, that was historically divided into several discrete mineralized zones, including, from southwest to northeast: the Canyon zone, Breccia Gold zone, and Raewyn Copper-Gold zone. The main body of the Sulphurets deposit has a lensoidal geometry, dipping approximately 30 degrees to the northwest with a horizontal extent of 2,200m, down dip extent of 550 m, and a true thickness of up to 330 m. Approximately 139 core holes totaling about 45,000 m were used to construct the Sulphurets block model used for this Report.
The Mitchell Zone (Figure 1.4) is underlain by foliated, schistose, intrusive, volcanic, and clastic rocks that are exposed in an erosional window below the shallow north dipping Mitchell Thrust Fault (MTF). Mineralization at the Mitchell deposit is genetically and spatially related to the Early Jurassic Mitchell intrusive complex, which is composed of Sulphurets (Texas Creek) suite diorite, monzodiorite, and granodiorite stocks and dykes. The intrusive complex cuts sedimentary and volcanic rocks of the Upper Triassic Stuhini Group and sandstones, conglomerates, and andesitic rocks of the Lower Jurassic Jack Formation (basal Hazelton Group). The Mitchell complex has been subdivided into three major intrusive phases. The successive intrusive phases were accompanied by the development of different hydrothermal assemblages, veining and mineralization. The Mitchell deposit features many characteristics typical of gold-enriched calc-alkaline porphyry copper deposits. Metals, chiefly gold and copper are generally at low concentrations, finely disseminated, stockwork or sheeted veinlet controlled and pervasively dispersed over hundreds of metres. Grades diminish slowly over large distances, distinct from the Sulphurets and Kerr zones. The basis for Mitchell Mineral Resources is the block model that was used in the 2016 PFS (Tetra Tech, 2016). That model was constructed using drilling data collected through 2011. Since that model was completed, 23 holes were drilled within the Mitchell resource area, although only 8 holes intersected estimated Mineral Resources based on the end-of-year 2011 block model. Grade comparisons between the 8 new holes and the end-of-year 2011 Mitchell block model showed no material differences between the new holes and the estimated block grades.
Seabridge Gold Inc. | 1-7 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 1.4 Mitchell Zone Cross Section
(Source: Seabridge, 2019) Notes: The vertical section through the Mitchell deposit is shown as A-A’ (Seabridge, 2019). The traces of the Mitchell thrust fault (MTF) and Mitchell basal shear zone (BSZ) are shown on each panel. a) Simplified geology of the Mitchell deposit, showing undifferentiated wallrock (gray), the Phase 1 diorite porphyry (pink), the sheeted vein body (red), Phase 2 granodiorite porphyry dikes (darker pink), and post-mineral dolerite dikes (dark green). The traces of drill holes occurring within ± 50 m of the section are shown as black lines. b) Simplified diagram of hydrothermal alteration zoning within the Mitchell deposit, illustrating the extent of potassic alteration, moderate and strong sericitic alteration (see text), as well as the occurrence of hydrothermal anhydrite; c) contours of logged volume percent of total quartz veins within Mitchell drill core; d) Au grades from the Mitchell block model, showing clear concentric zoning; e) block model Cu grades, showing a concentric zoning pattern similar to that of Au; and f) block model Mo grades, showing a zoning pattern with highest Mo grades rimming the central zone of high Au and Cu.
Seabridge Gold Inc. | 1-8 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
The Iron Cap deposit is the northernmost porphyry gold-copper-molybdenum deposit in the KSM district, and occurs structurally above the Mitchell deposit, in a panel of rocks located between the Mitchell Thrust Fault and Sulphurets Trust Fault. The deposit is hosted by an Early Jurassic intrusive complex that is roughly contemporaneous with intrusions located at the Mitchell and Kerr zones. The intrusive complex is composed of multiple intrusion and breccia phases, the earliest of which is a pre-mineral diorite. A second dioritic phase located in the northwestern portion of the deposit is thought to be syn-mineral and is spatially associated with some of the highest gold and copper grades observed at Iron Cap. Mineralized hydrothermal breccias are significantly more abundant and voluminous at Iron Cap than at Mitchell, Sulphurets, and Kerr. The Iron Cap mineralized zone forms a tabular body striking roughly north-south, dipping approximately -60 degrees to the west. The deposit has dimensions of approximately 1,500 m along strike, 1,500 m down dip, and up to 800 m in thickness. Mineralization remains open down dip. The Iron Cap grade model was updated following the completion of the 2018 drilling campaign. A total of 99 diamond core holes totaling about 62,000 m were used in the update.
1.6 | History |
The modern exploration history of the property began in the 1960s, with brief programs conducted by Newmont Mining Corp. (Newmont), Granduc, Phelps Dodge, and the Meridian Syndicate. All of these programs were focused towards gold exploration. Various explorers were attracted to this area due to the numerous large, prominent pyritic gossans that are exposed in alpine areas. There is evidence that prospectors were active in the area prior to 1935. Several short hole, reconnaissance level drilling programs were undertaken between 1969 and 1991. The Sulphurets Zone was first drilled by Esso Minerals in 1969, Kerr was first drilled by Brinco Ltd. in 1985, Mitchell Creek by Newhawk in 1991, and Iron Cap by Esso Minerals in 1980.
In 1989, Placer Dome acquired a 100% interest in the Kerr deposit from Western Canadian Mines; in the following year, they acquired the adjacent Sulphurets Property from Newhawk. The Sulphurets Property also hosts the Mitchell Creek deposit and other mineral occurrences. In 2000, Seabridge acquired a 100% interest from Placer Dome in both the Kerr and Sulphurets properties, subject to capped royalties.
There is no recorded mineral production, nor evidence of it, from the Property. Immediately west of the Property, small-scale placer gold mining has occurred in the Sulphurets and Mitchell creeks.
There is no recorded mineral production, nor evidence of it, from the Property. Immediately west of the Property, small-scale placer gold mining has occurred downstream in Sulphurets Creek.
1.7 | Mineral Resources |
The 2019 Mineral Resource estimate is the current and only Mineral Resource estimate used in this Report.
Seabridge Gold Inc. | 1-9 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Mineral Resources were estimated for the Property by Resource Modeling Inc. (RMI). The four mineralized zones, Kerr, Sulphurets, Mitchell and Iron Cap, were modeled within a single block model using 25m x 25m x 15m blocks. As more understanding was gained after each annual drilling campaign, individual block models were created for each area. Grade interpolation parameters have also evolved over time, reflecting changes required for modeling deeper mineralization intersected below the Kerr and Iron Cap deposits. A variety of basic descriptive statistics and spatial analyses were completed for each area upon the completion of annual drilling campaigns. These investigations include the generation of grade distribution tables, grade histograms, cumulative probability plots, grade box plots, grade contact plots, down-hole variograms, and directional variograms. In addition, new drill hole results were typically compared against the previous grade model to assess model performance.
RMI established the Mineral Resources for the various KSM mineralized zones using constraining conceptual open pit and block cave shapes which were used to establish reasonable prospects for eventual economic extraction as outlined in the CIM Definition Standards for Mineral Resources and Mineral Reserves (CIM, 2014). The following gold, copper, silver, and molybdenum metal prices were used for determining block NSR values, US$1,300/oz, US $3.00/lb, US $20.00/oz, and US $9.70/lb, respectively. Open pit and underground mining costs of Cdn$1.80/tonne and Cdn$6.00 to Cdn$7.00/tonne were used to establish conceptual open pit and underground resource shapes, along with a processing and G&A cost of Cdn$9.00/tonne.
The conceptual open pit and underground mining shapes were generated for each resource area based on calculated block model NSR values. The NSR values were generated for each deposit. MMTS generated conceptual pits for the Kerr, Sulphurets, and Mitchell deposits using MineSight® software and Lerchs-Grossmann algorithms. Golder developed conceptual block cave footprints using the block NSR values and Geovia’s PCBC™ Footprint Finder software. The footprint polygons were extruded vertically based on guidance from Golder.
The draw point extraction elevations were extruded vertically to create 3D solids that were used for resource tabulation. Conceptual caves were clipped against surface topography (Iron Cap) or conceptual resource pits (Kerr and Mitchell). Mineral Resources are determined, at Cdn$9 and Cdn$16 NSR cutoffs for open-pit constrained and underground mining constrained resources, respectively.
Table 1.1 summarizes the estimated Measured, Indicated, and Inferred Mineral Resources for each zone.
Seabridge Gold Inc. | 1-10 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Table 1.1 KSM Mineral Resources
Notes: Mineral Resources have an effective date of December 31, 2019. The 2019 Sulphurets drill holes were not used in the construction of the resource model but were used to validate the interpretations of the model. Mineral Resources that are not Mineral Reserves do not have demonstrated economic viability. It is reasonably expected that the majority of Inferred Mineral Resources could be upgraded to Indicated Mineral Resources with continued exploration. The Mineral Resources tabulated in Table 1.1 are inclusive of those Mineral Resources that have been converted to Mineral Reserves. Numbers may not add due to precision and roundoff of tonnes and grade. Details regarding key assumptions, parameters, and methods used in estimating the Mineral Resources are included in Section 14 of this Report.
Seabridge Gold Inc. | 1-11 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
1.8 | 2016 PFS Data Verification |
The 2016 Prefeasibility Study has been reviewed to determine whether it remains current and is suitable to be carried forward unchanged and included in the 2020 Technical Report on the KSM Property as part of the data verification process. The QPs reviewed information on the KSM Property generated since the effective date of the 2016 PFS to confirm there has been no material change to the 2016 PFS and that the Mineral Reserves and economic outcomes from the 2016 PFS remain current.
The data verification checks used updated resource models with updated process recoveries and escalated cost assumptions and estimated that variances in total mill feed would be limited to +1.3% on mill feed tonnes, no change on gold grade, and +2.4% on copper grade. These overall differences are not material to the 2016 PFS Mineral Reserves. The financial results using the 2016 PFS mine plan with updates to capital and operating costs, 3-year average metal prices and tax code revisions are also not materially different from the 2016 PFS financial results. Specifically, IRR, NPV and payback variances would be different by less than 0.2%, US$333M and 0.2 years, respectively, on a pre-tax basis. Results are summarized in Table 1.2.
Table 1.2 Summary of the 2016 PFS Verification Checks
Item | Unit | 2016 PFS (Base Case) | 2020 Verification Check | Variance |
NPV5 | US$M | 3,263 | 3,596 | 333 |
IRR | % | 10.4 | 10.6 | 0.2 |
Payback | years | 6 | 5.8 | -0.2 |
1.9 | Mining Methods |
The 2016 PFS uses conventional large-scale open pit and block cave underground mining methods. Pit phases at the Mitchell, Kerr, and Sulphurets deposits have been engineered based on the results of economic pit limit analysis. Starter pits have been selected in higher-grade areas. Underground mining has been proposed for the Iron Cap deposit and below the Mitchell open pit to limit the volume of waste generated from the potential open pits.
1.9.1 | Mineral Reserve Estimate |
In the 2016 PFS, the waste to ore open pit cut-offs and underground shut-offs, including process recovery, were determined using metal prices of US$1,200.00/oz of gold, US$2.70/lb of copper, US$17.50/oz of silver, and US$9.70/lb of molybdenum and a foreign exchange rate of US$0.83 per Cdn$1.00 for NSR calculations.
The open pit Mineral Reserves are repeated from the 2016 PFS pit designs and the 2016 PFS Mineral Resource models. These estimations include mining loss and dilution that varies by pit ranging from 2.2% to 5.3% for loss, and 0.8% to 3.9% for dilution. A variable cut-off grade strategy has been applied with a minimum NSR of Cdn$9.00/t.
Seabridge Gold Inc. | 1-12 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
The mining NSR shut-off is Cdn$15.00/t for the Mitchell underground mine and Cdn$16.00/t for the Iron Cap underground mine. The Mitchell Mineral Reserves include 59 Mt of non-mineralized dilution at zero grade (13%) and 7 Mt of mineralized dilution (2%). The Iron Cap Mineral Reserves include 20 Mt of dilution at zero grade (9%) and 25 Mt of mineralized dilution (11%).
Proven and Probable Mineral Reserves for the KSM mineral deposits with an effective date of July 31, 2016 are stated in Table 1.3.
Table 1.3 KSM Proven and Probable Reserves as of July 31, 2016
Zone |
Mining
Method |
Reserve
Category |
Tonnes
(Mt) |
Average Grades | Contained Metal | ||||||
Au
(g/t) |
Cu
(%) |
Ag
(g/t) |
Mo
(ppm) |
Au
(Moz |
Cu
(Mlb) |
Ag
(Moz) |
Mo
(Mlb) |
||||
Mitchell | Open Pit | Proven | 460 | 0.68 | 0.17 | 3.1 | 59 | 10.1 | 1,767 | 45 | 60 |
Probable | 481 | 0.63 | 0.16 | 2.9 | 66 | 9.7 | 1,677 | 44 | 70 | ||
Block Cave | Probable | 453 | 0.53 | 0.17 | 3.5 | 34 | 7.7 | 1,648 | 51 | 34 | |
Iron Cap | Block Cave | Probable | 224 | 0.49 | 0.20 | 3.6 | 13 | 3.5 | 983 | 26 | 6 |
Sulphurets | Open Pit | Probable | 304 | 0.59 | 0.22 | 0.8 | 52 | 5.8 | 1,495 | 8 | 35 |
Kerr | Open Pit | Probable | 276 | 0.22 | 0.43 | 1.0 | 3 | 2.0 | 2,586 | 9 | 2 |
Totals | Proven | 460 | 0.68 | 0.17 | 3.1 | 59 | 10.1 | 1,767 | 45 | 60 | |
Probable | 1,738 | 0.51 | 0.22 | 2.5 | 38 | 28.7 | 8,388 | 138 | 147 | ||
Total | 2,198 | 0.55 | 0.21 | 2.6 | 43 | 38.8 | 10,155 | 183 | 207 |
Note: All Mineral Reserves stated in Table 1.3 account for mining loss and dilution.
1.9.2 | Mine Production Plan |
During the initial 33 years of mine life, the majority of ore is derived from open pits, with the tail end of this period supplemented by the initial development of underground block cave mines. After Year 1 ramp up, ore delivery to the mill from Year 2 to Year 35 is designed to be maintained at an average of 130,000 t/d. After depletion of the open pits, the mill processing rate will be reduced to about 96,000 t/d for 10 additional years, before ramping down to just over 61,000 t/d. The change in throughput matches the production levels from the block cave with appropriate ramp ups and ramp downs applied. The remaining few years use stockpile reclaim to supplement the declining production from the block caves at the end of the mine life.
LOM production is summarized in Figure 1.5.
The topographic relief in the areas of the open pits, block cave mines, and the Rock Storage Facilities (RSFs) requires specific geotechnical consideration. Conservative designs, alternative/mitigating scenarios, and extra data and analyses have been included in the mine designs.
Potential geohazards have been identified in the area of the proposed open pits, block cave mine, RSFs, roads, and other infrastructure; designs include the mitigation of geohazards such as avalanche control, provision of avalanche run-out routes, barriers, and avalanche area and slope hazard avoidance as appropriate.
Seabridge Gold Inc. | 1-13 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
The mining progression is designed to build RSFs in lifts (bottom-up construction) to consolidate the foundations and reduce downslope risks. Final RSF configurations are designed with terraces at “as dumped” angle of repose, with flat benches between terraces. The overall slope angle is between 26° and 30° to provide the ability for re-sloping to accommodate the end land use and reclamation plan.
Figure 1.5 2016 PFS Mill Feed Production Schedule
Source: MMTS
Ore is mined from Mitchell open pit from Years 1 to 24. Mitchell transitions to block cave mining as the Mitchell pit is mined out. Ore is mined from Sulphurets open pit from Years 1 to 17. Kerr open pit supplements block cave mining from Year 25 to Year 34, and during these years, ore will be transported by an overland conveyor and rope conveyor system starting at the Kerr pit. Mitchell block cave is estimated to have a production ramp-up period of six years, steady state production at 20 Mt/a for 17 years, and then ramp-down production for another 7 years. Iron Cap is estimated to have a production ramp-up period of four years, steady state production at 15 Mt/a for 10 years, and then ramp-down production for another 9 years. The underground pre-production period would be six years, with first underground ore production from Mitchell and Iron Cap in Years 23 and 32, respectively. Figure 1.6 shows the 2016 PFS Open Pit LOM general arrangement.
Seabridge Gold Inc. | 1-14 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 1.6 2016 PFS Open Pit LOM
Source: MMTS
Seabridge Gold Inc. | 1-15 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
1.10 | Mineral Processing And Metallurgical Testing |
Several wide-ranging metallurgical test programs have been carried out since 2007 to assess the metallurgical responses of the mineral samples from the KSM deposits, especially the samples from the Mitchell deposit.
The test results indicate that the mineral samples from the four separate mineralized deposits are amenable to the flotation-cyanidation combined process. The process consists of:
● | copper-gold-molybdenum bulk rougher flotation followed by gold-bearing pyrite flotation |
● | regrinding the bulk rougher concentrate followed by three stages of cleaner flotation to produce a copper-gold-molybdenum bulk cleaner flotation concentrate |
● | molybdenum separation of the bulk cleaner flotation concentrate to produce a molybdenum concentrate and a copper/gold concentrate containing associated silver |
● | cyanide leaching of the gold-bearing pyrite flotation concentrate and the scavenger cleaner tailing- to further recover gold and silver values as doré bullion. |
The testing programs from 2017 to 2020, as described in Section 13, show the following:
● | a finer primary grind size can improve the copper and gold metallurgical performance, especially for copper from the Iron Cap and Deep Kerr samples. |
● | rougher flotation at a low slurry solid density can improve copper and gold metallurgical performance, especially for the mineralization with more clay-type minerals |
● | the test results suggest that the gold-bearing sulphide products (first cleaner scavenger tailing and pyrite concentrate) from Deep Kerr and Iron Cap zones did not seem to respond well to the gold recovery by the established cyanide leaching treatment. |
1.11 | 2016 PFS Recovery Methods |
The mill feed from the Mitchell, Sulphurets, Kerr, and Iron Cap deposits will be processed at an average rate of 130,000 t/d. The mill feed will come from open pit mines (upper Mitchell Zone, Sulphurets and upper Kerr Zone) and underground block caving operations (lower Mitchell Zone and Iron Cap deposits). The Mitchell deposit will be the dominant source of mill feed for the process plant and will be processed through the entire mine life, excluding Years 24 and 25. The ore from the Sulphurets deposit will be fed to the plant together with the ore from the Mitchell pit from Years 1 to 17, excluding Years 4, 5, 12, and 13 and with ore from the other deposits during the last four years. Ore from the Kerr deposit, together with ore from the other deposits, will be introduced to the plant during Years 24 to 34, and Year 53, while the Iron Cap ore will be fed to the process plant during Year 32 to the end of mine life.
The 23 km MTT tunnel system has been designed to connect the Mitchell OPC and the Treaty OPC. The crushed ore will be transported through the tunnels by train. This tunnel will also be used for electrical power transmission sourced from the Northwest Transmission Line and for the transport of personnel and supplies for mine operating and water management activities.
The proposed process flow sheet is shown in Figure 1.7.
Seabridge Gold Inc. | 1-16 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 1.7 2016 PFS Simplified Process Flow Sheet
Source: Tetra Tech
Note: ROM – run-of-mine
Seabridge Gold Inc. | 1-17 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
1.12 | 2016 PFS Project Infrastructure |
1.12.1 | Geohazards |
Geohazard and risk assessments were completed for the proposed facilities within the KSM footprint. As expected for a mountainous, high-relief project site, snow avalanche and landslide hazards exist, with the potential to affect mine construction, operations, and closure.
Geohazard scenarios were identified for the mine facilities considered. Using unmitigated geohazard levels as a baseline, these scenarios were assessed in terms of risk to human safety, economic loss, environmental loss, and reputation loss. Geohazard risk levels were assigned to each scenario with ratings ranging from very low to very high.
Mitigation strategies have been identified to reduce the high and very high risk scenarios to a target residual risk not exceeding moderate. Further risk reduction will be achieved where practical and cost-efficient.
1.12.2 | Tailings Management |
The TMF for the 2016 PFS will be constructed in three cells: the North and South cells for flotation tailings, and a lined Central Cell for CIL residue tailings. The cells are confined between four dams (North, Splitter, Saddle, and Southeast dams) located within the Teigen-Treaty creek cross-valley. Design criteria for the dams are based on the Canadian Dam Association (CDA) guidelines. The area is moderately seismic and the dams are designed to resist earthquake loads. A site-specific seismic hazard assessment indicates peak ground acceleration (PGA) at 10,000-year return period of 0.14 g. The TMF cells are designed to store the 30-day probable maximum flood (PMF) with snowmelt, although an operational phase discharge pipeline and closure spillways are also provided to route the critical duration PMF.
De-pyritized flotation tailings will be stored in the North and South cells. The pyrite bearing CIL residue tailings will be stored in the lined Central Cell. In total, the TMF will have a capacity of 2.3 Bt.
The North and Central cells will be constructed and operated first; they will store tailings produced in the first 25 years. The North Cell will then be reclaimed while the Central and South cells are in operation.
The North, Splitter, and Saddle earth-fill starter dams will be constructed over a two-year period, in advance of the start of milling, to form the North and Central cells and will provide start-up tailings storage for two years. Cyclone sand dams will be progressively raised above the starter dams over the operating LOM. The North Starter Dam will be constructed with a low-permeability glacial till core and raised with compacted cyclone sand shells, using the centerline geometry method. The Splitter and Saddle starter dams will form the CIL pond. These dams will also subsequently be raised with cyclone sand shells, with the CIL pond and the Splitter and Saddle dams incorporating high-density polyethylene (HDPE) and linear low-density polyethylene (LLDPE) liners in the core and basin floor in order to surround the CIL tailings within a completely lined impoundment.
Seabridge Gold Inc. | 1-18 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
An Independent Geotechnical Review Board (IGRB) was established in January 2015 to independently review and to provide expert oversight, opinion, and advice to Seabridge on the design, construction, operational management, and ultimate closure of the TMF and Water Storage Dam (WSD). The IGRB will review the TMF and WSD on an ongoing basis to ensure that these structures meet internationally accepted standards and practices which effectively minimize risks to employees, lands, and communities.
Seabridge commissioned KCB to undertake the Best Available Tailings Technology (BATT) review in August 2015 in response to the Independent Expert Engineering Investigation and Review Panel report on the breach of the Mount Polley tailings storage facility. The Review Panel concluded that future projects require not only an improved adoption of best applicable practices (BAP), but also a migration to best available technology (BAT). The KCB report (KCB 2016a) also meets the new BC Mining Code requirement that new mines must provide an alternate assessment of BAT in their provincial permit applications.
The BATT study confirmed that the existing TMF design, consisting of centerline dams constructed with double cyclone sand and a till core in association with wet tailings deposition, is the best available technology for tailings deposition, and the most environmentally responsible design to minimize long-term risks associated with the proposed TMF. This conclusion confirms the findings from KSM’s IGRB that the TMF’s design is robust and appropriate for KSM’s site-specific characteristics.
The BATT study also confirmed that the TMF design that was included in the overall project design, that received provincial and federal EA approval, is the best possible design for eliminating risks associated with operation and closure. The study specifically determined that filtered tailings options are impractical for KSM and would result in greater environmental impacts and risks, contrary to the assertions of many environmental groups who have advocated that only filtered tailings disposal technologies should be implemented.
1.12.3 | Mine Site Water Management |
The overall site water management strategy for the 2016 PFS, including the discharge from the WSF via the High-density Sludge (HDS) water treatment plant (WTP) was the strategy that was reviewed and approved during the EA review process.
Diversion Tunnels and Surface Diversion
Two main diversion tunnel routes will be required to route glacial melt water and non-contact valley runoff from the Mitchell and McTagg valleys around the mine site.
Lined surface diversion channels will be constructed progressively during operations, along the contact of the RSF and the hillside, to divert surface flows.
Seabridge Gold Inc. | 1-19 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Water Storage Facility
All contact water from the mine site areas (open pits, RSFs, roads, infrastructure) will be directed to the WSF, located in the lower Mitchell Creek area. The WSF will be formed with a 165 m high rock fill asphalt core dam built to full height by Year -1 and is sized to store annual freshet flows and volumes resulting from a 200-year wet year. The core zones of the WSF dam will be founded on competent sedimentary rock foundations. Seepage will be controlled by the asphalt core in the dam and the dam foundation will be grouted. A seepage collection pond will return seepage water to the WSF.
Water Treatment
Mine area contact water will be treated with a HDS lime water treatment, of which the discharge from the plant was approved as a component of the environmental assessment review process. A Selenium WTP will be constructed and operational by Year 5 to treat up to 500 L/s of seepage principally from the RSF and select point sources within Mitchell Valley with selenium loading waters, compared to lower concentrations within the WSF.
The HDS WTP and the WSF will be operational before mill start-up to allow pre-production activity in the Mitchell Valley and Mitchell pit area.
1.12.4 | Permanent Access Roads |
There will be two primary permanent access roads to the mine site and PTMA, the Coulter Creek Access Road (CCAR) and the TCAR, respectively. The CCAR will be primarily a single lane road starting from the former Eskay Creek mine and ending near the HDS WTP at the western extent of mine site disturbance. The TCAR will be a two lane road coming off of Highway 37 that provides access to both the PTMA and the Saddle construction area.
Additional roads will also be required at mine start-up to facilitate maintenance access and construction of the proposed uphill cut-off drainage ditch.
1.12.5 | Winter Access Road |
A winter access road will be constructed during the first construction year to provide the initial access to the KSM mine site for logistics support.
1.12.6 | Off-Site Infrastructure |
Copper concentrates produced at the Treaty OPC will be filtered at the processing plant and transported by contract trucking firms via Highway 37 and 37A to one of the port vendors in Stewart, BC.
1.12.7 | Tunneling |
A total of nine major tunnels will be excavated during the pre-production period and during operations. These tunnels will be classified as either infrastructure tunnels or water tunnels. This does not include development work for the block caves.
Seabridge Gold Inc. | 1-20 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Engineering for the major components of the MTT has been developed by two experienced tunnel contractors and have been adapted to form the advance rate and cost estimates for the infrastructure and water tunnels.
The tunnels will be driven in accordance with the BC Mines Act and Regulations using mechanized drill and blast techniques and will follow the conditions contained within the License of Occupation.
The detailed contractor tunneling estimate for the MTT has been adapted to estimate the excavation costs and advance rates for the other associated excavations in the MTT, as mentioned above. They have also been used for the other infrastructure and water tunnels.
1.12.8 | Power Supply and Distribution |
Power supply for KSM will be from BC Hydro’s existing NTL transmission line. Interconnection to the site will be via a new 30 km long, 287 kV, spur transmission line to be constructed from the Treaty OPC to a new BC Hydro switching station on the NTL, to be located beside Highway 37 at a point near the intersection of the Treaty Creek Access Road and the highway. Refer to Section 18.10 herein.
The power supply will be supplemented by several energy recovery plants. Refer to Section 18.10.12.
1.13 | Environmental Studies, Permitting, and Social or Community Impact |
The KSM mine development is subject to the BC Environmental Assessment Act, the Canadian Environmental Assessment Act, and Chapter 10 of the Nisga’a Final Agreement (NFA).
As of January 2020, KSM has successfully gone through the provincial and federal environmental assessment review processes, and the appropriate certificates/approvals have been obtained. Additionally, permits for early-stage construction activities, continuation of exploration, and certain permit and project approval renewals have also been obtained. Seabridge continues to advance permitting to allow for the construction of the Property, as well as to expand exploration activities. Details of the provincial, federal, and NFA processes and current statuses, as well as the current permitting status of KSM, are included in Section 20.0.
KSM underwent a harmonized EA process with the provincial and federal governments, in accordance with the principles of the Canada-BC Agreement on Environmental Assessment Cooperation (Cooperation Agreement 2004). The process included a working group comprising federal and provincial officials, the Nisga’a Lisims Government (NLG), Aboriginal groups, and local government agencies. Representatives of the US federal and Alaska state agencies were extensively involved in the EA review processes, as a matter of courtesy at the insistence of Seabridge, given that the mineral deposits are located on a tributary of the Unuk River, a transboundary river, 30 km upstream of the US/Canada border. Authorizations are not required from any US federal or state regulatory agency for KSM to proceed into construction and operation.
Seabridge Gold Inc. | 1-21 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
1.13.1 | Benefit Agreements |
Tahltan Nation
On June 10, 2019 the Tahltan Nation and Seabridge Gold Inc. announced that the parties reached agreement on the terms of a Co-operation and Benefits Agreement in connection with KSM. Tahltan Nation voted 77.8% in favour of the KSM Project Impact Benefits Agreement (IBA). The IBA provides a thorough and co-operative framework for the parties to continue building the social licence of KSM through commitments to economic benefits and environmental management of the land.
Nisga’a Nation
On June 17, 2014, Seabridge Gold entered into a comprehensive Benefits Agreement with the Nisga’a Nation in respect of Seabridge Gold’s KSM Property located in northwest British Columbia. The Benefits Agreement established a long-term co-operative relationship between Seabridge and the Nisga’a Nation under which the Nisga’a Nation will support development of KSM, participate in economic benefits from KSM and provide ongoing advice. The Agreement includes commitments by Seabridge regarding jobs and contracting opportunities at KSM, education and training, financial payments and a framework for working together on ongoing development matters. This comprehensive agreement also addresses concerns expressed by the Nisga’a Nation around the potential environmental and social impacts of KSM.
1.13.2 | Closure and Reclamation |
In the 2016 PFS, the KSM Mine will be closed in accordance with the closure plan outlined in Section 20.7, and in further detail in the Application/EIS (Rescan 2013).
The closure and reclamation plan has three objectives that provide assurance to the province that the site will be left in a condition that will limit any future liability to the people of BC:
● | to provide stable landforms |
● | to re-establish productive land use |
● | to protect terrestrial and aquatic resources. |
1.14 | 2016 PFS Capital Cost Estimate |
An initial capital of US$5.005 billion is estimated for the 2016 PFS. All currencies in are expressed in US dollars, unless otherwise stated. Costs have been converted using a fixed currency exchange rate of US$0.80 to Cdn$1.00. The expected accuracy range of the capital cost estimate is +25%/-10%.
Seabridge Gold Inc. | 1-22 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
This capital cost estimate includes only initial capital, which is defined as all capital expenditures that are required to produce concentrate and doré. A summary of the capital costs is shown in Table 1.4.
Table 1.4 | 2016 PFS Initial Capital Cost Summary |
Major
Area No. |
Major Area Description |
Cost
(US$ M) |
1 – Direct Costs | ||
1.1 | Mine Site | 1,218 |
1.2 | Process | 1,336 |
1.3 | TMF | 441 |
1.4 | Environmental | 15 |
1.5 | On-site Infrastructure | 23 |
1.6 | Off-site Infrastructure | 120 |
1.7 | Permanent Electrical Power Supply and Energy Recovery | 159 |
Total Direct Costs | 3,312 | |
2 – Indirect Costs | ||
2.91 | Construction Indirect Costs | 449 |
2.92 | Spares | 34 |
2.93 | Initial Fills | 20 |
2.94 | Freight and Logistics | 99 |
2.95 | Commissioning and Start-up | 6 |
2.96 | EPCM | 231 |
2.97 | Vendor’s Assistance | 23 |
Total Indirect Costs | 862 | |
3 – Owner’s Costs | ||
3.98 | Owner’s Costs | 160 |
4 – Contingency | ||
4.99 | Contingency | 671 |
2016 PFS Capital Cost Total | 5,005 |
Notes: Costs have been rounded to the nearest million dollars.
Capital costs exclude reclamation and closure costs that are accounted for separately in the economic analysis. Sustaining capital costs were also estimated leveraging the same basis of information applied to the initial capital estimate with respect to vendor quotations, labour, and material costs. The sustaining capital costs total US$5.503 billion and consist of:
● | open pit mine development, principally mobile fleet replacement |
● | underground mine development at Mitchell and Iron Cap block cave mines |
● | process improvements principally at Mitchell and Treaty OPC, and SMCT |
● | TMF expansions, mainly comprising dam raises and CIL basin expansions |
● | permanent electrical power supply and energy recovery systems |
● | indirect costs, including construction indirects, spares, freight and logistics, EPCM, vendor assistance, and contingency. |
Seabridge Gold Inc. | 1-23 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
1.15 | 2016 PFS Operating Cost Estimate |
The average operating cost for the 2016 PFS is estimated at US$12.03/t milled at the nominal process rate of 130,000 t/d or US$12.33/t for the LOM average as shown in Table 1.5.
The cost estimates in this section are based upon budget prices in Q1/Q2 2016 or based on the data from the database of the consulting firms involved in the cost estimates. When required, costs in this report have been converted using a three-year average currency exchange rate of US$0.80 to Cdn$1.00. The expected accuracy range of the operating cost estimate is +25%/-10%.
The estimates do not include energy recovery credit (approximately US$0.12/t milled LOM) from mini hydropower stations and the cost (approximately US$0.15/t milled LOM) related to Provincial Sales Tax (PST).
Table 1.5 2016 PFS Average Operating Cost Summary
At the Nominal Feed
Rate of 130,000 t/d* |
LOM
Average (US$/t milled) |
||
(US$ M/a) | (US$/t milled) | ||
Mine | |||
Mining Costs – Mill Feed | 190.2 | 4.59 | 4.59 |
Open Pit – Mill Feed | - | 4.40 | 4.40 |
Block Caving – Mill Feed | - | 4.99 | 4.99 |
Mill | |||
Process | 251.1 | 5.29 | 5.34 |
G&A and Site Service | |||
G&A | 43.3 | 0.91 | 1.03 |
Site Service | 18.9 | 0.40 | 0.44 |
TMF and SWM | |||
TMF Dam Management | 6.1 | 0.13 | 0.13 |
Selenium Water Treatment | 9.4 | 0.20 | 0.21 |
HDS Water Treatment | 22.0 | 0.46 | 0.53 |
Mine Site Water Pumping | 2.5 | 0.05 | 0.06 |
Total Operating Cost | 543.5 | 12.03 | 12.33 |
Notes: | *The nominal feed rate estimate excludes mine operating costs and is based on a mill feed rate of 130,000 t/d; the costs do not reflect higher unit costs late in the mine life when the mill feed rates are lower. Costs have been rounded to the nearest hundred thousands of dollars. |
Seabridge Gold Inc. | 1-24 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
The operating costs are defined as the direct operating costs including mining, processing, tailings storage, water treatment, and G&A. The hydropower credit from recovered hydro-energy during mining operations is not accounted for directly against operating cost estimate, but is included in the economic analysis. Sustaining capital costs including all capital expenditures after the process plant has first been put into production are excluded from the operating cost estimate.
1.16 | 2016 PFS Economic Evaluation |
Tetra Tech prepared an economic evaluation for the 2016 PFS based on a pre-tax financial model. For the 53-year mine life and 2,198 Mt Mineral Reserve, the following pre-tax financial parameters were calculated using the 2016 Base Case metal prices:
● | 10.4% IRR |
● | 6.0-year payback on US$5.005 billion capital |
● | US$3.263 billion NPV at a 5% discount rate. |
The tax component of the financial model used for the post-tax economic evaluation was prepared and reviewed by other consultants (see Section 22.0 for further details).
Based on the tax analysis and review, the following post-tax financial results were calculated:
● | 8.0% IRR |
● | 6.8-year payback on US$5.005 billion capital |
● | US$1.539 billion NPV at a 5% discount rate. |
The 2016 Base Case results incorporate historical three-year trailing averages for metal prices as of July 31, 2016 as follows:
● | gold – US$1,230/oz |
● | copper – US$2.75/lb |
● | silver – US$17.75/oz |
● | molybdenum – US$8.49/lb |
● | exchange rate –US$0.80 to Cdn$1.00. |
Metal revenues projected in the KSM cash flow models were based on the average metal values indicated in Table 1.6.
Seabridge Gold Inc. | 1-25 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Table 1.6 2016 PFS Metal Production
Years 1 to 7 | LOM | |
Total Tonnes to Mill (000s) | 323,000 | 2,199,000 |
Annual Tonnes to Mill (000s) | 46,100 | 41,500 |
Average Grades | ||
Gold (g/t) | 0.82 | 0.55 |
Copper (%) | 0.24 | 0.21 |
Silver (g/t) | 2.8 | 2.6 |
Molybdenum (ppm) | 48 | 43 |
Total Production | ||
Gold (’000 oz) | 6,530 | 28,600 |
Copper (’000 lb) | 1,435,000 | 8,270,000 |
Silver (’000 oz) | 18,200 | 114,700 |
Molybdenum (’000 lb) | 11,200 | 62,100 |
Average Annual Production | ||
Gold (’000 oz) | 933 | 540 |
Copper (’000 lb) | 205,000 | 156,000 |
Silver (’000 oz) | 2,600 | 2,160 |
Molybdenum (’000 lb) | 1,590 | 1,170 |
In addition to the 2016 Base Case, three metal price/exchange rate scenarios were also developed: the first uses the metal prices and exchange rate used in mine optimization and design (2016 Design Case); the second uses the spot metal prices and closing exchange rate on July 1, 2016 (2016 Spot Case); the third uses higher metal prices to indicate upside potential (2016 Alternate Case). The input parameters and pre- and post-tax results of all scenarios can be found in Table 1.7.
Table 1.7 2016 PFS Summary of the Pre- and Post-tax Economic Evaluations
Unit |
2016
Base Case |
2016
Design Case |
2016
Spot Case |
2016
Alternate Case |
|
Metal Price | |||||
Gold | US$/oz | 1,230.00 | 1,200.00 | 1,350.00 | 1,500.00 |
Copper | US$/lb | 2.75 | 2.70 | 2.20 | 3.00 |
Silver | US$/oz | 17.75 | 17.50 | 20.00 | 25.00 |
Molybdenum | US$/lb | 8.49 | 9.70 | 7.00 | 10.00 |
Exchange Rate | US$:Cdn$ | 0.80 | 0.83 | 0.77 | 0.80 |
table continues… | |||||
Seabridge Gold Inc. | 1-26 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Note: *Net of by-product
1.16.1 | Sensitivity Analysis |
Sensitivity analyses were carried out on the pre-tax 2016 Base Case for the following parameters:
● | gold, copper, silver, and molybdenum metal prices |
● | exchange rate |
● | capital expenditure |
● | operating costs. |
The 2016 PFS NPV is most sensitive to gold price and exchange rate followed by operating costs, copper price and capital costs. The NPV, IRR, and payback sensitivities can be seen in Figure 1.8, Figure 1.9, and Figure 1.10.
Seabridge Gold Inc. | 1-27 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 1.8 2016 PFS Sensitivity Analysis of Pre-tax NPV at a 5% Discount Rate
Source: Tetra Tech, 2016
Figure 1.9 2016 PFS Sensitivity Analysis of Pre-tax IRR
Source: Tetra Tech, 2016
Seabridge Gold Inc. | 1-28 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 1.10 2016 PFS Sensitivity Analysis of Pre-tax Payback Period
Source: Tetra Tech, 2016
1.17 | Recommendations |
Based on the work carried out in the 2016 PFS and the resultant economic evaluations, the next phase of KSM development should comprise more advanced studies in order to further assess the technical and economic viability of KSM. Specific recommendations made by Qualified Persons (QPs) are detailed in Section 26.0 and are briefly summarized in the following subsections.
1.17.1 | 2016 PFS Recommendations |
The key recommendations for advanced studies emanating from the 2016 PFS focus on improving both open pit and underground mine design through additional drilling and testing; water related topics to further refine the inputs and results of site wide water balance analyses from the construction period through closure; and tunnels to develop more design-specific information to assist in reducing construction and operational risks and associated capital and operating costs. Other recommendations address data collection needs for RSFs, ore transportation, TMF, metallurgical testing, and process engineering. The estimated total cost to implement the 2016 PFS recommendations in Section 26 ranges between US$35 to US$45 million.
Seabridge Gold Inc. | 1-29 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
2.0 | Introduction |
2.1 | Overview |
The KSM Property is currently 100%-owned by Seabridge. Description and location of the KSM Property is presented in Section 4.0 of this report.
2.2 | Terms of Reference |
This report was prepared for Seabridge to summarize the updated Mineral Resource estimate on the Property and results of the data verification conducted on the 2016 PFS, and that remains current and relevant. This Report was also prepared to remove the preliminary economic assessment in respect of the KSM Property that appeared in the previous Technical Report on the KSM Property dated and effective April 30, 2020.
This 2016 KSM PFS data verification has been prepared for Seabridge based on work performed by the following independent consultants:
● | Tetra Tech |
● | Wood |
● | MMTS |
● | Golder |
● | McElhanney |
● | BGC |
● | RMI |
● | KCB |
● | Brazier |
● | ERM. |
2.2.1 | Mineral Resource Estimate Update |
The Mineral Resource estimate has been updated in 2019 and is presented in Section 14.0 of this report.
2.2.2 | 2016 Prefeasibility Study Data Verification |
The 2019 Mineral Resource estimate is the current and only Mineral Resource estimate used in this Report. To assess whether the updated 2019 information to date would materially change the 2016 PFS results, several verification checks have been made to confirm the validity of the 2016 PFS. Details and results of the checks are presented in Section 12.0 of this report.
Seabridge Gold Inc. | 2-1 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Removal of 2020 Preliminary Economic Assessment Update
This Technical Report updates the previously prepared Technical Report on the KSM Property dated and effective April 30, 2020. All information in respect of the preliminary economic assessment of the KSM Property appearing in that Report has been removed from this Technical Report.
2.3 | Sources of Information |
The key information sources for the Report were:
● | previously filed technical report titled 2016 KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study Update and Preliminary Economic Assessment, effective date Oct 06, 2016 |
● | documents referenced in Section 3.0 (Reliance on Other Experts) |
● | documents referenced in Section 27.0 (References) of this Report |
● | additional information provided by Seabridge personnel where required. |
2.4 | Effective Dates |
The Report has a number of effective dates as follows:
● | KSM Mineral Resource estimate: December 31, 2019 |
● | KSM Mineral Reserve estimate: July 31, 2016 |
● | Latest information on mineral tenure, surface rights and Property ownership: February 25, 2020 |
The overall effective date of the Report is April 30, 2020.
2.5 | Qualified Persons |
The name of the QPs of this report and their QP certificates are included at the end of the report.
2.6 | Site Visits |
The following QPs conducted a site visit of the Property:
● | Derek Kinakin (M.Sc., P.Geo., P.G.) of BGC visited the Property from August 13 to 17, 2018 and from August 19 to 21, 2013. The site visit involved a general review of the site conditions for the Mitchell and Sulphurets deposits, and detailed inspection and qualitative geotechnical assessment of the core from many of the holes that had been drilled up to that time. |
Seabridge Gold Inc. | 2-2 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
● | Hassan Ghaffari (P.Eng.) of Tetra Tech visited the Property on September 20, 2014 and conducted a general site overview in the proposed PTMA area. |
● | James H. Gray (P.Eng.) of MMTS visited the Property from June 21 to 22, 2017, and also during 2008, 2009 and 2010. The 2008, 2009 and 2017 visits were general site overview of the potential open pit and rock storage sites and water management structures. Site access alternatives and the route of the MTT were also viewed. The 2010 visit was specifically to inspect the open pit mining areas before the winter snowpack receded. |
● | Michael J. Lechner (P. Geo., RPG, CPG) of RMI last visited the Property from October 5 to October 7, 2019. During the site visit, the geologic models were reviewed with Seabridge’s geologic staff, drill core examined and mineralized outcrops at the Mitchell deposit were inspected. |
● | Jianhui (John) Huang (Ph.D., P.Eng.) of Tetra Tech visited the Property from June 21 to 22, 2017, from April 27 to 28, 2017 and on September 16, 2008 and conducted an overview of the proposed general project and process plant sites and inspected the drill cores. |
● | Neil Brazier (P.Eng.) of Brazier visited the Property from September 12 to 16, 2011, July 20 to 25, 2012 and from September 1 to 4, 2013 and inspected transmission line routes, the plant-site area and locations of energy recovery projects. |
● | J. Graham Parkinson (P.Geo.) of KCB visited the Property on June 7th, 2020 as well as during 2007, 2008, 2009, 2012, 2014, 2016 and 2018. The purposes of these site visits included geotechnical site investigations and infrastructure planning. |
● | Rolf Schmitt (P.Geo.) of ERM visited the property on July 12, 2019, via helicopter access accompanied by Jessy Chaplin, Seabridge Director, Permitting. The visit entailed a fly-over of the PTMA area, including Treaty Creek access road and powerline route from Bell-Irving River. The site visit also included fly-over of Iron Cap Exploration adit area and ground visit in upper Mitchell Creek valley at the glacier terminus, Camp 9, and the KSM exploration camp at Sulphurets Lake to examine geochemical kinetic field tests and examples of drill core from ICEA adit area. |
● | Ross D. Hammett (Ph.D., P.Eng.) of Golder visited the Property from September 12 to 15, 2017 and from August 8 to 10, 2010 and from October 18 and 19, 2011. The 2017 site visit involved a general inspection of the site conditions, with a specific focus on the stability of the mountain slopes where portals are proposed to be constructed, and all aspects of surface water management related to the proposed mining. It also involved visits to the drill rigs where core was being logged, and detailed inspection and qualitative geotechnical assessment of the core from many of the holes that had been drilled since 2012. The 2010 and 2011 site visits involved a general review of the site conditions for the Mitchell, Iron Cap, and Sulphurets deposits, and detailed inspection and qualitative geotechnical assessment of the core from many of the holes that had been drilled up to that time. |
● | Brendon Masson (P.Eng.) of McElhanney visited the Property on September 13, 2012 and conducted an aerial reconnaissance over the existing and proposed site access road alignments. |
Seabridge Gold Inc. | 2-3 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
3.0 | Reliance on Other Experts |
Mr. Hassan Ghaffari, P.Eng. relied on:
● | Seabridge management concerning private royalties applicable to the PFS and applied in Section 22.0. |
● | Lilburn & Associates LLC (Lilburn) concerning tax matters relevant to this PFS and detailed in Section 22.0. The reliance is based on a letter from Lilburn to Seabridge titled “Assistance with the tax portion of the economic analysis prepared by Tetra Tech Canada Inc. (“Tetra Tech”), dated September 13, 2016, in connection with the 2016 KSM (Kerr-Sulphurets-Mitchell) PFS, NI 43-101 Technical Report. |
● | PricewaterhouseCoopers (PwC) concerning tax matters relevant to the PFS and detailed in Section 22.0. This reliance is based on a letter from PwC to Seabridge titled “Assistance with the review of income and mining tax portions of the economic analysis prepared by Seabridge Gold Inc. (“SGI”), dated September 14, 2016, in connection with the 2016 KSM (Kerr-Sulphurets-Mitchell) PFS, NI 43-101 Technical Report. |
Dr. John Huang, Ph.D., P.Eng. relied on:
● | Mr. Neil Seldon of Neil S. Seldon & Associates Ltd. (NSA) for matters relating to the smelting terms, refining terms, saleability, and sales terms for copper concentrate and molybdenite concentrate. These terms are summarized in Section 19.0 and applied in Section 22.0. |
Mr. William E. Threlkeld, P.Geo., PG relied on:
● | Mr. John Brassard, President of The Claim Group Inc., for matters relating to mineral and placer claims status and ownership. The reliance is based on a letter from TGC to Seabridge titled “Seabridge Gold Inc., Title Review-KSM Property, Province of British Columbia”, dated February 25, 2020. Mr. William E. Threlkeld, who is responsible for the information in Section 4.0, has relied entirely on the information provided by Mr. Brassard regarding the claims which comprise the KSM property, their ownership, and their status in Section 4.0. |
Seabridge Gold Inc. | 3-1 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
4.0 | Property Description and Location |
The KSM Property is in northwest BC at an approximate latitude of 56.50 N and a longitude of 130.30 W. The Mineral Resources that are the subject of this report are located relative to the North American Datum (NAD)83 Universal Transverse Mercator (UTM) coordinate system. The Property is approximately 950 km northwest of Vancouver, 65 km north-northwest of Stewart, and 21 km south-southeast of the Eskay Creek Mine (production ceased in 2009). Figure 1.2 is a general location map.
The KSM Property comprises four discrete claim blocks and a group of placer claims. Placer claims are on only part of the westernmost claim block of the KSM Property. Claim blocks of the KSM Property are referred to as:
● | the KSM claims |
● | the Seabee claims |
● | the Tina claims |
● | the Treaty Creek Switching Station claims |
The four KSM claim blocks include 79 mineral claims (cell and legacy) and 2 mining leases with a combined area of 40,784.97 ha. There are also 17 KSM placer claims held by KSM Mining ULC covering part of the KSM claims. The placer claims secure rights in a historically designated placer district. The Claim Group Inc. (TCG) acts as Agent on behalf of Seabridge with respect to maintaining all pertinent records associated with the KSM Property tenures. All claims and leases are in good standing under the Mining Tenure Act of BC and are recorded as owned 100% by KSM Mining ULC, a wholly owned subsidiary of Seabridge.
The Seabee and Tina claim blocks are located about 19 km northeast of the Kerr-Sulphurets-Mitchell-Iron Cap mineralized zones. These claim blocks are currently being considered for proposed infrastructure siting. The Treaty Creek Switching Station claims, adjacent to the NTL and east of the Seabee claims, are also being considered for power infrastructure siting.
The initial group of KSM mineral claims were purchased by Seabridge from Placer Dome in 2001. The mineral claims were converted from legacy claims to BC’s new Mineral Titles Online (MTO) system in 2005. In the MTO system, claims are located digitally using a fixed grid on lines of latitude and longitude with cells measuring 15 seconds north-south and 22.5 seconds east-west (approximately 460 m by 380 m). The legacy claims were located by previous owners by placing tagged posts along the boundaries; however, the survey method employed in locating the legacy claims is not known. The MTO system, where no markings are required on the ground, eliminates the potential for gaps and/or overlapping claims inherent in the old system.
Seabridge Gold Inc. | 4-1 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
There is no record or evidence of any significant historical mining on the Property other than minimal placer mining. There are no known environmental liabilities to which the Property is subject apart from current exploration activity that is fully permitted. The BC Mineral Inventory (Minfile) contains 25 mineral occurrences associated with previous work in this area (mostly copper and gold).
The original KSM claim group consisted of two contiguous claim blocks known as the Kerr and Sulphurets (or Sulphside) properties. The claims are 100% owned by KSM Mining ULC, a wholly-owned subsidiary of Seabridge. Placer Dome retained a 1% net smelter returns royalty that is capped at Cdn$4.5 million, which is now owned by Newmont. Two of the pre-converted claims (Xray 2 and 6) are subject to a 2% net smelter returns royalty obligation capped at US$650,000, and Seabridge has been paying, annually, minimum advance royalty payments that may be credited against future royalties. The lands covered by these claims are now contained within mining lease No. 1031440.
Since it acquired the original KSM claim group, Seabridge has expanded its property holdings around the original KSM claims through staking and purchase of several claim groups. These groups include the Seabee group, acquired by staking, the Tina and BJ groups purchased in 2009, the New BJ group purchased in 2011, and the Treaty Creek Switching Station claims purchased in 2018. The Seabee, Tina, and Treaty Creek Switching Station claims are together referred to as the Seabee Property, and the original KSM group, BJ, and New BJ groups are referred to as the KSM Property (Figure 4.1). In 2014, most of the original KSM claims and the BJ claims acquired in 2009 were converted into two mining leases. The 17 KSM placer claims are shown in Figure 4.2.
Annual holding costs for all leases and claims vary by year depending on whether the fees are paid in cash or the value of work completed on developing the claims is used in lieu of a cash payment. Over the next five years, the annual cash holding costs to keep the claims and leases valid range between Cdn$450,000 to Cdn$970,000. Those estimated costs can be reduced significantly if work expenditures are applied in lieu of cash fees. No additional permits are required to address the recommendations in this report; part of the expenditures for that work can be applied in lieu of cash fees. Seabridge believes they have addressed all issues to secure access, mineral title, and ability to perform work on the property and are not aware of any risks, other than those identified in this Report, that could materially affect proposed work plans.
Mr. Threlkeld has relied on information with respect to all mining claim matters as provided by TCG in a letter titled “Title Review – KSM Property”, by John Brassard, dated February 25, 2020
Seabridge’s mineral claim blocks including the KSM, Seabee, Tina, and Treaty Creek Switching Station groups are shown in Table 4.1 and Table 4.3. The location of the four mineralized zones (Kerr, Sulphurets, Mitchell, and Iron Cap) is depicted in the southwestern portion of Figure 4.1. Table 4.2 shows Seabridge’s placer claims.
Seabridge Gold Inc. | 4-2 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 4.1 KSM Mineral Claim Map
Seabridge Gold Inc. | 4-3 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 4.2 KSM Placer Claim Map
Seabridge Gold Inc. | 4-4 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Table 4.1 KSM Mineral Claims and Leases
Claim
No. |
Claim
Name |
Area
(ha) |
Good To
Date |
Map
Number |
Mineral Claims (20) | ||||
394780 | BJ 5 | 100.0000 | 25-Nov-2024 | 104B059 |
394781 | BJ 6 | 100.0000 | 25-Nov-2024 | 104B059 |
394786 | BJ 11 | 500.0000 | 25-Nov-2024 | 104B059 |
394787 | BJ 12 | 500.0000 | 25-Nov-2024 | 104B059 |
394788 | BJ 13 | 100.0000 | 25-Nov-2024 | 104B059 |
394789 | BJ 13A | 25.0000 | 25-Nov-2024 | 104B059 |
394790 | BJ 14 | 100.0000 | 25-Nov-2024 | 104B059 |
394791 | BJ 15 | 250.0000 | 25-Nov-2024 | 104B059 |
394794 | BJ 18 | 300.0000 | 25-Nov-2024 | 104B059 |
394808 | BJ 31A | 375.0000 | 25-Nov-2024 | 104B049 |
394809 | BJ 32 | 150.0000 | 25-Nov-2024 | 104B049 |
394810 | BJ 33 | 450.0000 | 25-Nov-2024 | 104B049 |
394811 | BJ 34 | 150.0000 | 25-Nov-2024 | 104B049 |
394812 | BJ 35 | 450.0000 | 25-Nov-2024 | 104B049 |
683463 | - | 1,246.5185 | 25-Nov-2024 | 104B |
683483 | - | 837.5991 | 25-Nov-2024 | 104B |
705591 | BJ GAP1 | 231.6166 | 05-Feb-2024 | 104B |
705592 | BJ GAP2 | 160.4624 | 05-Feb-2024 | 104B |
1036269 | KSM 1 | 53.4100 | 21-May-2020 | 104B |
1036270 | KSM 2 | 17.8100 | 21-May-2020 | 104B |
Totals | - | 6,097.4166 | - | - |
Mineral Leases (2) | ||||
1031440 | - | 6,085.0000 | 06-Oct-2020 | - |
1031441 | - | 5,162.0000 | 06-Oct-2020 | - |
Totals | - | 11,247.0000 | - | - |
Seabridge Gold Inc. | 4-5 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Table 4.2 KSM Placer Claims
Seabridge Gold Inc. | 4-6 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Table 4.3 Seabee/Tina KSM Claims
Claim
No. |
Claim
Name |
Area
(ha) |
Good To
Date |
Map
Number |
SEABEE Property Mineral Claims (46) | ||||
566467 | BRIDGE1 | 445.8258 | 08-Apr-2022 | 104A |
566468 | BRIDGE2 | 445.5733 | 08-Apr-2022 | 104A |
566469 | BRIDGE3 | 427.7919 | 08-Apr-2022 | 104A |
566470 | BRIDGE4 | 427.9770 | 08-Apr-2022 | 104A |
566471 | BRIDGE5 | 445.7336 | 08-Apr-2022 | 104A |
566472 | BRIDGE6 | 445.5766 | 08-Apr-2022 | 104A |
566473 | BRIDGE7 | 427.9217 | 08-Apr-2022 | 104A |
566474 | BRIDGE8 | 427.7599 | 08-Apr-2022 | 104A |
566475 | BRIDGE9 | 427.6131 | 08-Apr-2022 | 104A |
566476 | BRIDGE10 | 445.5312 | 08-Apr-2022 | 104A |
566477 | BRIDGE11 | 302.8823 | 08-Apr-2022 | 104A |
566478 | BRIDGE12 | 427.4311 | 08-Apr-2022 | 104A |
566479 | BRIDGE13 | 445.1533 | 08-Apr-2022 | 104A |
566481 | BRIDGE14 | 445.0611 | 08-Apr-2022 | 104A |
566482 | BRIDGE15 | 444.8427 | 08-Apr-2022 | 104A |
566484 | BRIDGE16 | 444.5621 | 08-Apr-2022 | 104A |
566485 | BRIDGE17 | 426.7283 | 08-Apr-2022 | 104A |
566487 | BRIDGE18 | 444.7114 | 08-Apr-2022 | 104A |
566488 | BRIDGE19 | 444.8346 | 08-Apr-2022 | 104A |
566489 | BRIDGE20 | 444.9690 | 08-Apr-2022 | 104A |
566490 | BRIDGE21 | 427.2642 | 08-Apr-2022 | 104A |
566491 | BRIDGE22 | 445.1671 | 08-Apr-2022 | 104A |
566492 | BRIDGE23 | 427.3078 | 08-Apr-2022 | 104A |
566493 | BRIDGE24 | 427.9239 | 08-Apr-2022 | 104A |
566494 | BRIDGE25 | 427.9246 | 08-Apr-2022 | 104A |
566495 | BRIDGE26 | 444.8785 | 08-Apr-2022 | 104A |
566496 | BRIDGE27 | 391.3145 | 08-Apr-2022 | 104B |
566497 | BRIDGE28 | 444.4573 | 08-Apr-2022 | 104A |
566567 | BRIDGE29 | 427.4572 | 08-Apr-2022 | 104A |
571582 | SEABEE1 | 408.8286 | 08-Apr-2022 | 104A |
571583 | SEABEE2 | 373.1368 | 08-Apr-2022 | 104A |
571584 | SEABEE3 | 444.0680 | 08-Apr-2022 | 104A |
571585 | SEABEE4 | 426.0832 | 08-Apr-2022 | 104A |
571586 | SEABEE5 | 372.6392 | 08-Apr-2022 | 104A |
571587 | SEABEE6 | 159.6419 | 08-Apr-2022 | 104A |
573813 | SEABEE7 | 213.2634 | 08-Apr-2022 | 104A |
575633 | SEA 1 | 445.1987 | 08-Apr-2022 | 104A |
575635 | SEA 2 | 445.3012 | 08-Apr-2022 | 104A |
575636 | SEA 3 | 445.4096 | 08-Apr-2022 | 104A |
575638 | SEA 4 | 445.4484 | 08-Apr-2022 | 104A |
table continues… |
Seabridge Gold Inc. | 4-7 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Claim
No. |
Claim
Name |
Area
(ha) |
Good To
Date |
Map
Number |
Seabridge Gold Inc. | 4-8 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
5.0 | Accessibility, Climate, Infrastructure, Local Resources and Physiography |
The following section was taken from RMI’s April 6, 2007 NI 43-101 report entitled “Mitchell Creek Technical Report, Northern British Columbia” (Lechner, 2007), remains largely unchanged, and has only been updated for consistency in abbreviations and grammar.
The Property lies in the rugged Coastal Mountains of northwestern BC, with elevations ranging from 520 m in Sulphurets Creek valley to over 2,300 m at the highest peaks. Valley glaciers fill the upper portions of the larger valleys from just below the tree line and upwards. The glaciers have been retreating for at least the last several decades. Aerial photos indicate the Mitchell Glacier has retreated more than 1 km laterally and perhaps several hundred metres vertically since 1991.
The Property is drained by Sulphurets and Mitchell Creek watersheds that empty into the Unuk River, which flows westward to the Pacific Ocean through Alaska. The tree line lies at about 1,240 masl, below which a mature forest of mostly hemlock and balsam fir abruptly develops. Fish are not known to inhabit the Sulphurets and Mitchell watersheds. Large wildlife such as deer, moose, and caribou are rare due to the rugged topography and restricted access; however, bears and mountain goats are common.
The climate is generally that of a temperate or northern coastal rainforest, with sub-arctic conditions at high elevations. Precipitation is high with annual rainfall and snowfall totals estimated to be somewhere between the historical averages for the Eskay Creek Mine and Stewart, BC. These range from 801 mm to 1,295 mm of rain and 572 cm to 1,098 cm of snow, respectively (data to 2005). The length of the snow-free season varies from about May through November at lower elevations and from July through September at higher elevations. Exploration activities have typically been carried out from late May into November. It is envisioned that operations would be conducted throughout the year with assets required for snow removal.
Access to the Property is via helicopter. Three staging areas for mobilizing crews and equipment were used. These are:
1. | An area located at kilometre 54 on the private Eskay Creek Mine Road, which is about 25 km to the north-northwest of the Property. |
2. | Along the public Granduc Road, which is located about 35 km to the south-southeast of the Property, which in turn is about 40 km north of the town of Stewart, BC. A section of this road passes through Alaska and the town of Hyder. This area has not been utilized since 2011. |
3. | The Bell II Lodge, on Highway 37, 40 km east-northeast. |
Stewart, a town of approximately 400 inhabitants, is the closest population center to the Property. It is connected to the provincial highway system via paved, all weather Highway 37A. The larger population centers of Prince Rupert, Terrace, Kitimat, and Smithers, with a total population of about 36,000, are located approximately 270 km to the southeast.
Seabridge Gold Inc. | 5-1 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Multiple deep-water loading facilities for bulk shipping mineral concentrates and freight handling exist in Stewart, one of which is currently utilized by the Red Chris Mine. Historically, they have been used by several other mines in northern, BC. The nearest railway is the CNR Yellowhead route, which is located approximately 220 km southeast of the Property. This line runs east-west, and can deliver concentrate to deep-water ports near Prince Rupert and Vancouver, BC.
The Property lies on Crown land; therefore, all surface and access rights are granted by the Mineral Tenure Act, the Mining Right of Way Act, and the Mining Rights Amendment Act. There are no settlements or privately owned land in this area; there is limited commercial recreational activity in the form of helicopter skiing and guided fishing adventures. The closest power transmission lines run along the Highway 37, 40 km east of the Property, and along the 37A corridor to Stewart, approximately 50 km southeast.
Pretium is currently mining their high-grade underground Brucejack deposit that is located about 5 km east of the Property. The Brucejack mine site is accessible via a year-round, all weather road branching from Highway 37.
Additional details on availability of power, water, waste rock and tailings storage areas and surface rights to support mine operations are discussed in the relevant sections of this Report.
Seabridge Gold Inc. | 5-2 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
6.0 | History |
6.1 | Exploration History |
The modern exploration history of the Property began in the 1960s, with brief programs conducted by Newmont Exploration of Canada Ltd. (Newmont), Granduc, Phelps Dodge, and the Meridian Syndicate. All of these programs were focused towards gold exploration. Various explorers were attracted to this area due to the numerous large, prominent pyritic gossans that are exposed in alpine areas. There is evidence that prospectors were active in the area prior to 1935. Several short hole, reconnaissance level drilling programs were undertaken between 1969 and 1991. The Sulphurets Zone was first drilled by Granduc Mines in 1968, Kerr by Brinco Ltd. in 1985, Mitchell Creek by Newhawk Gold Mines Ltd. (Newhawk) in 1991, and Iron Cap by Esso Minerals in 1980.
In 1989, Placer Dome (Placer) acquired a 100% interest in the Kerr deposit from Western Canadian Mines; in the following year, they acquired the adjacent Sulphurets Property from Newhawk. The Sulphurets Property also hosts the Mitchell Creek deposit and other mineral occurrences. In 2000, Seabridge acquired a 100% interest from Placer in both the Kerr and Sulphurets properties, subject to capped royalties.
There is no recorded mineral production, nor evidence of it, from the Property. Immediately west of the Property, small-scale placer gold mining has occurred in the Sulphurets and Mitchell creeks.
Table 6.1 summarizes the more recent exploration history of the Property.
Seabridge Gold Inc. | 6-1 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Table 6.1 Exploration Summary of the Kerr Zone
Table 6.2 summarizes the exploration history of the Sulphurets, Mitchell, and Iron Cap zones.
Seabridge Gold Inc. | 6-2 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Table 6.2 Exploration Summary of the Sulphurets, Mitchell, Iron Cap Zones, and other Exploration Targets
Year | Activity |
1880-1933 | Limited placer gold exploration and mining |
1935-1959 | Placer gold prospecting and staking of mining claims |
1959-1960 | Newmont and Granduc conducted surveys including airborne mag. Sulphurets and Iron Cap Au zones discovered. D. Ross, S. Bishop and W. Dawson prospected and stake claims in area |
1961-1968 | Granduc Mines conducted geologic/geochem surveys, drilled 9 holes into Sulphurets zone. Ross-Bishop-Dawson claims were optioned by Phelps Dodge in 1962, Meridian Syndicate in 1965, and Granduc in 1968 |
1963 | R. Kirkham completed a M.Sc. thesis on the geology of Mitchell and Sulphurets areas |
1981 | T. Simpson completed a M.Sc. thesis on the geology of the Sulphurets gold zone |
1971-1977 | Granduc Mines conducted additional exploration surveys targeting molybdenum and drilled 6 holes into Snowfield zone (Bruceside) |
1979-1984 | Esso Minerals optioned Sulphurets property and completed early stage exploration including drilling 14 holes (2,275 m) |
1985-1991 | Granduc optioned Sulphurets to Lacana (later Corona) and Newhawk. Lacana-Newhawk JV spends about Cdn$21M developing West Zone and other smaller precious metal veins on Bruceside property. Drilled 11 holes at Sulphurets. Homestake undertook exploration after acquiring Corona |
1991 | Arbee prospect was optioned by Newhawk from D. Ross |
1992 | Arbee prospect was optioned by Placer from Newhawk |
1991-1992 | Newhawk commissioned AB geophysical survey over Sulphurets. Newhawk subdivided Sulphurets property into Sulphside and Bruceside. Placer acquired Sulphside (Sulphurets, Mitchell, Iron Cap, and other prospects) |
1992 | Placer undertook delineation drilling of Sulphurets deposit at 50 meter centers (23 holes) |
1993 | J. Margolis completed a PhD thesis on the Sulphurets district. Newhawk-Corona drilled 3 holes in the Snowfields and Josephine zones east of Sulphurets |
1992-1996 | Placer completed geologic modeling, resource estimation (pre NI 43-101), preliminary met testwork, and scoping studies |
1999 | Silver Standard Resources acquired Newhawk. |
1996-2000 | Sulphurets project was dormant |
2000 | Seabridge acquired a 100% interest in the Sulphurets/Mitchell properties from Placer. |
2002 | Noranda Inc. acquired an option to earn up to 65% from Seabridge |
2003-2004 | Noranda Inc. undertook various exploration surveys |
2005 | Falconbridge Ltd. (formerly Noranda) completed 4,092 m of diamond drilling in 16 holes |
2006 | Seabridge purchased Falconbridge’s option and drilled 29 holes totaling about 9,129 m at the Sulphurets and Mitchell zones |
2007 | Seabridge purchased Arbee prospect from D. Ross and drilled 37 holes totaling 15,650 m |
table continues… |
Seabridge Gold Inc. | 6-3 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Year | Activity |
2008 | Seabridge purchased Arbee prospect from D. Ross, drilled 40 holes totaling 17,328 m, started metallurgical testing, obtained new topographic data, and initiated permit related activities |
2009 | Seabridge drilled 44 holes totalling 11,844 m (resource definition, geotechnical and water monitoring), conducted metallurgical testing, and intensified permit data collection |
2010 | Seabridge drilled 86 holes totaling 26,756 m (resource definition and geotechnical), conducted metallurgical testing, and intensified permit data collection |
2011 | Seabridge drilled 54 resource definition holes totalling 18,087 m, continued prefeasibility work, and completed magneto-telluring geophysical surveys |
2012 | Seabridge drilled 40 holes totalling 18,015 m including 15 holes from other nearby targets (e.g. Camp Zone and Icefield) |
2013 | Seabridge drilled 11 holes totalling 8,857 m and completed induced polarization and down-hole geophysical surveys |
2014 | Seabridge drilled 13 holes totalling 13,605 m and completed magneto-telluring and gravity geophysical surveys |
2015 | Seabridge drilled 3 holes totalling 4,395 m and completed airborne magnetic geophysical surveys |
2016 | Seabridge drilled one resource definition hole totalling 1,038 m |
2017 | Seabridge drilled 12 resource definition holes totalling 11,077 m |
2018 | Seabridge drilled 42 holes totalling 25,848 m |
2019 | Seabridge drilled 26 resource definition holes totalling 6,121 m and completed airborne ZTEM and 3D induced polarization surveys |
6.2 | Historical Resource Estimates |
RMI is unaware of any publicly disclosed historical Mineral Resource estimates for the KSM deposits prior to Seabridge’s entry into the district. RMI has prepared Mineral Resources consistent with the standards in NI 43-101 for the Kerr, Sulphurets, Mitchell, and Iron Cap zones (Lechner, 2007; Lechner 2008a; Lechner, 2008b; Lechner, 2009; Lechner, 2010; Lechner, 2011; Lechner, 2014: Lechner, 2016). Those Mineral Resources have been replaced and updated with this Report as discussed in Section 14.0.
6.3 | History of Production |
There is no known production from the Kerr, Sulphurets, Mitchell, or Iron Cap deposits.
Seabridge Gold Inc. | 6-4 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
7.0 | GEOLOGICAL SETTING AND MINERALIZATION |
7.1 | Geological Setting |
The KSM porphyry Au-Cu-Mo district is located in northwestern British Columbia, within the Intermontane belt of the Canadian Cordillera. Encompassing portions of British Columbia, the Yukon, and Alaska, the Canadian Cordillera is a highly fertile metallogenetic domain that features a suite of ore bodies ranging in age from 1.6 billion to less than 20 million years old (Nelson and Colpron, 2007). The district lies within “Stikinia”, a long-lived volcanic island-arc terrane that was accreted onto the Paleozoic basement of the North American continental margin in the Middle Jurassic. Stikinia is the largest of several fault bounded, allochthonous terranes within the Intermontane belt, which lies between the post-accretionary. Tertiary intrusives of the Coast belt and continental margin sedimentary prisms of the Foreland (Rocky Mountain) belt. In the KSM area, Stikinia is dominated by variably deformed, oceanic island arc complexes of the Triassic Stuhini and Jurassic Hazelton groups (Alldrick and Britton, 1988; Kirkham and Margolis, 1995). Back-arc basins formed eastward of the KSM Property in the Late Jurassic and Cretaceous were filled with thick accumulations of fine black clastic sediments of the Bowser Group. Folding and thrusting due to sinistral transpression in the mid-Cretaceous, related to the development of the Skeena fold and thrust belt, followed by extensional conditions generated the area’s current structural features (Febbo et al., 2015). The mid-Cretaceous deformation generated two of the most important structures in the district: the north-northeast striking, moderately west-northwest dipping Sulphurets thrust fault (STF) and Mitchell thrust fault (MTF). Remnants of Quaternary basaltic eruptions occur throughout the region.
Early Jurassic sub-volcanic intrusive complexes are common in the Stikinia terrane, and several host well-known precious- and base-metal-rich hydrothermal systems. These include copper-gold porphyry zones such as Galore Creek, Red Chris, Kemess, Mt. Milligan, and KSM. In addition, there are a number of related polymetallic zones including skarns at Premier, epithermal veins, subaqueous vein, and replacement sulphide zones at Eskay Creek, Snip, Brucejack, and Granduc. At KSM, Triassic rocks include marine sediments and intermediate volcanics of the Stuhini Group. The lowermost Stuhini Group is dominated by turbiditic argillite and sandstone, which are overlain by volcanic pillowed flows and breccias. The upper portion consists of turbidites and graded sandstones similar to the base strata. The Stuhini Group is separated by an erosional unconformity from the overlying Jurassic sediments and volcanics of the Jack Formation and Hazelton Group. The Jack Formation is comprised of fossiliferous, limey sediments, mudstones, and sandstones. The base is marked by a granodiorite and limestone cobble bearing conglomerate. Overlying the Jack Formation is the Hazelton Group, dominated by andesitic flows and breccias zoned in a volcanic chain with high paleotopographic relief. Distinct felsic welded tuff horizons of the Mount Dilworth Formation are an important stratigraphic marker in the Hazelton Group, as they are closely associated with the Eskay Creek Zone.
A variety of dykes, sills, and plugs of diorite, monzodiorite, granodiorite, monzonite, syenite, and granite are found in the area. U-Pb zircon radiometric dating indicates that the vast majority of the intrusions in the district are of Early Jurassic age (~190 – 197 ± 2 Ma; Kirkham and Margolis, 1995; MacDonald, 1993; Bridge, 1993; Febbo et al., 2019a), coinciding with the age of ore formation. Small volumes of thin post-mineral dykes, including mid-Cretaceous diabase dykes and Eocene lamprophyre dykes, are also observed within the Property. The Early Jurassic intrusions in the district are categorized into two regional suites: the calc-alkaline Texas Creek suite and the alkaline Premier suite. Texas Creek suite are intimately related to porphyry Au-Cu-Mo ore formation at the Kerr, Sulphurets, Mitchell and Iron Cap deposits, and are locally referred to as the “Sulphurets suite intrusions.” The Premier suite intrusions are most abundant in the hanging wall of the STF in the district, and comprise sills and plugs of typically coarse-grained porphyritic monzonite to syenite. Figure 7.1 is a generalized geologic map of the KSM district showing lithology, major structures, and mineralized zones. Drill hole locations are shown for all KSM deposits in Section 10.
Seabridge Gold Inc. | 7-1 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 7.1 Geology of the KSM District (Seabridge, 2019)
Seabridge Gold Inc. | 7-2 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
7.2 | Mineralization |
7.2.1 | Kerr Zone |
The Kerr Zone is centered on an Early Jurassic, north-south trending, steep westerly dipping, tabular intrusive complex. Drilling demonstrates that the Kerr Zone has an extent of 2,400 m along strike, a width of roughly 800 m, and a vertical extent of at least 2,200 m. The flattened and elongated modern morphology of Kerr is highly unusual for porphyry copper-gold deposits, which typically display roughly cylindrical morphologies. The flattened morphology and relatively elevated copper:gold ratio of the Kerr Zone distinguishes Kerr from the other deposits in the district. The surface expression of the Kerr deposit is a large and elongated, northerly trending, pyritic gossan, primarily exposed in a cirque on the northern flank of Kerr peak.
The Kerr intrusive complex is composed of a suite of northerly-striking and steeply west-dipping dykes and intrusions emplaced into a sequence of rhythmically bedded siltstones, sandstones, conglomerates, and debris flows belonging to the Lower Jurassic Hazelton Group. Wall rocks adjacent to the intrusions have been hornfelsed and hydrothermally altered, but generally contain marginal metal grades. The complex is composed of an east and west limb separated by a thin wedge of intensely altered sedimentary wall rock. The west limb is up to 500 m thick, and the east limb is up to 300 m thick.
Mineralization at Kerr was associated with the sequential emplacement of numerous syn-mineral plagioclase-hornblende-(biotite-K-feldspar-apatite)-phyric diorite to monzodiorite dykes, which display a porphyritic texture with 30-40 vol.% phenocrysts up to 5 mm in length. Dykes are typically several meters to several tens of meters wide. Three distinct phases of these intrusions are recognized based upon typical metal content, quartz vein abundance, degree of hydrothermal alteration, and presence of xenoliths of earlier phases. The earliest syn-mineral phase (“P1”) is characterized by strong gold and copper mineralization and a high abundance (50-90 vol.%) of quartz veins. The second phase of syn-mineral diorite intrusions (“P2”) make up the bulk of the Kerr intrusive complex and feature variable mineralization and quartz vein abundance. The P2 intrusions envelop and truncate portions of the P1 intrusions, and are observed to contain occasional P1 xenoliths. Finally, late syn-mineral to post-mineral dykes (“P3”), with weak to no mineralization, cut the earlier phases. Volumetrically minor post-mineral dykes, with true thicknesses typically on the order of a meter, are also observed at the Kerr deposit. These include a set of unmineralized, K-feldspar megacrystic, plagioclase-hornblende-phyric porphyritic dykes, aphanitic diabase dykes, and amygdaloidal lamprophyre dykes. Current geochronological data for the Kerr deposit includes a U-Pb zircon age of 197 ± 3 Ma for a syn-mineral “syenodiorite” intrusion, as well as a slightly younger U-Pb zircon age of 195 ± 1.5 Ma for a late syn-mineral K-feldspar megacrystic porphyry dyke (Bridge, 1993).
Small volumes of syn-mineral hydrothermal breccias are also found at Kerr, with subangular to angular clasts of local intrusions or wall rock and rock flour matrices. Hydrothermal breccias with abundant anhydrite and quartz vein fragments (“QABX”) are also observed; these QABX zones are commonly overprinted with strong sericitic alteration and a high-sulphidation bornite – pyrite ± enargite mineral assemblage, and can contain strong copper mineralization. The “Bornite Breccia” zone at Mitchell is analogous to the QABX zones at Kerr.
Seabridge Gold Inc. | 7-3 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Hydrothermal alteration at the Kerr deposit is consistent with that described for many calc-alkaline porphyry deposits, with zones of propylitic, potassic, sericite-chlorite, and sericitic alteration, as well as small zones of remnant advanced argillic alteration.
Post-mineral deformation and faulting, mainly related to the mid-Cretaceous development of the Skeena fold and thrust belt, has significantly impacted the Kerr deposit. Efforts to thoroughly document and reconstruct the geology of the Kerr deposit are hindered by intense hydrothermal alteration and extensive post-mineralization deformation. Large portions of Kerr are affected by texturally destructive sericitic alteration that contains a pervasive foliation, rendering protolith identification difficult, and the occurrence of numerous post-mineral faults further obscure the original spatial relationships within the deposit.
Pervasive foliation and vein deformation resulting from mid-Cretaceous deformation is observed throughout the Kerr deposit. However, as noted at the Mitchell deposit (e.g., Febbo et al., 2015), foliation is strongest in rocks characterized by alteration assemblages with low rock strengths, such as zones with strong sericitic alteration. East-west shortening related to mid-Cretaceous deformation likely contributed to the unusually flattened morphology of the Kerr deposit. Furthermore, the strongest sericitic alteration occurs at the northern end of Kerr, at a lower elevation than the south side of Kerr. Sericitic alteration is typically formed at relatively shallow depths in porphyry copper systems, atop deep potassic alteration. The current emplacement of alteration assemblages suggests tilting or complex structural modification of the system.
The dominant copper mineral is chalcopyrite, which typically occurs as isolated grains about 0.2 mm to 2 mm across, disseminated and clustered in quartz veins, fractures, and surrounding haloes. Bornite is present almost exclusively in the north half of the east leg, within a QABX zone containing >50% crackled quartz veins, and is accompanied by coarse grained chalcopyrite and minor tennantite. Tennantite-tetrahedrite is rare, but widely distributed in late quartz-carbonate veins, mostly in wall rocks, along with minor sphalerite, rare galena, and arsenopyrite. Dark, arseniferous pyrite is associated with these minerals. Molybdenite is a very minor constituent, and Kerr contains significantly lower overall Mo grades than the other deposits in the district. Visible gold has not been observed except under microscopic examinations, where it is observed as less than 100 µm inclusions within sulphides, mainly chalcopyrite, and sulphide grain boundaries. High-grade mineralization at Kerr is primarily associated with early potassic alteration and “A-type” and “B-type” quartz veins (using the terminology of Gustafson and Hunt, 1975). At shallower levels in the system, both copper and gold grades are highly correlated with the density of A- and B-type veining. At depth, however, mineralization does not correlate as strongly with quartz vein density, and is of a more disseminated style.
Seabridge Gold Inc. | 7-4 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
A lithological map of the Kerr deposit is shown in Figure 7.2. Representative cross sections through the south and the north of the Kerr deposit, showing lithological units, quartz vein abundance, gold grade, and copper grade, are shown in Figure 7.3 and Figure 7.4, respectively.
Figure 7.2 Geological Map of the Kerr Deposit. (Seabridge, 2019) Thin dykes are not displayed.
Seabridge Gold Inc. | 7-5 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 7.3 Four panels of the same vertical E-W section through the Kerr deposit, at 6,258,650N, showing different properties of the deposit. (Seabridge, 2019)
Notes: Location of section is shown on Figure 7.3: a) Simplified lithology, with important intrusive phases (P1, P2, P3, P4, P6), hydrothermal breccia with anhydrite and quartz vein clasts (QABX), hydrothermal breccias alongside P2 intrusions (IBX), and undifferentiated wall rock (WR) shown. Drill hole traces, within ±100 m of the section, are displayed as black lines. Units are described in the text. The intrusion labels refer to early intrusions with high quartz vein densities (50-90 vol.%; P1), syn-mineral plagioclase-hornblende-phyric intrusions (P2), post-mineral plagioclase-hornblende-phyric dykes (P3), post-mineral K-feldspar megacrystic dykes (P4), and post-mineral lamprophyre dykes (P6). b) Isolines of total volume percent quartz vein abundance as logged in drill core. c) Gold grade, from the Seabridge Gold EOY 2016 block model of Kerr. d) Copper grade, from the EOY 2016 block model of Kerr.
Seabridge Gold Inc. | 7-6 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 7.4 Four panels of the same vertical E-W section through the Kerr deposit, at 6,259,650N, showing different properties of the deposit. (Seabridge, 2019)
Notes: Location of section is shown on Figure 7.4: a) Simplified lithology, with important intrusive phases (P1, P2, P3, P4, P6), hydrothermal breccia with anhydrite and quartz vein clasts (QABX), and undifferentiated wall rock (WR) shown. Drill hole traces, within ±100 m of the section, are displayed as black lines. Units are described in the text. The intrusion labels refer to early intrusions with high quartz vein densities (50-90 vol.%; P1), syn-mineral plagioclase-hornblende-phyric intrusions (P2), post-mineral plagioclase-hornblende-phyric dykes (P3), post-mineral K-feldspar megacrystic dykes (P4), and post-mineral lamprophyre dykes (P6). b) Isolines of total volume percent quartz vein abundance as logged in drill core. c) Gold grade, from the Seabridge Gold EOY 2016 block model of Kerr. d) Copper grade, from the EOY 2016 block model of Kerr.
Seabridge Gold Inc. | 7-7 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
7.2.2 | Sulphurets Zone |
The Sulphurets Zone is situated between the Kerr and Mitchell deposits, immediately to the north of the valley hosting Sulphurets Lake. Sulphurets was historically subdivided into several adjacent mineralized zones, including the Raewyn Copper-Gold, Breccia Gold, Main Copper, and Canyon zones. As defined by the resource cut-off (NSR Cdn$9.00), the main body of the Sulphurets deposit has a lensoidal geometry, dipping approximately 30 degrees northwest. It has a horizontal extent of 2,200 m, down dip extent of 550 m, and true thickness of up to 330 m. Copper and gold grades gradually diminish towards the limits of the known resource area, but the extent of anomalous copper and gold grades has not been completely delineated down dip or in the southwest direction.
Sulphurets is a structurally complex deposit, intersected by numerous east-vergent faults associated with the mid-Cretaceous Skeena fold and thrust belt. The deposit is composed of stacked thrust fault panels made up of Upper Triassic Stuhini Group and Lower Jurassic Hazelton Group volcano-sedimentary strata intruded by a number of dykes and stocks. The thrust faults and most dykes and intrusions within the Sulphurets Zone strike southwest-northeast and dip at shallow to moderate angles towards the northwest. Three main fault panels make up the deposit, each featuring a distinct set of intrusions and style of mineralization.
The uppermost fault panel (“Upper Panel”) is located in the hanging wall of the STF. The most voluminous plutonic rocks in the Upper Panel are Premier suite monzonites and syenites, including a large intrusive body, dipping at roughly 40° – 50° degrees towards the northwest, as well as several thinner dykes. The Premier suite intrusions are typically pinkish to reddish K-feldspar-plagioclase-phyric porphyries with abundant coarse, tabular K-feldspar phenocrysts, commonly displaying concentric zoning. A U-Pb zircon radiometric age of 191.8 +6.5/-1.0 Ma was obtained for a Premier “feldspar porphyry” from the Upper Panel (MacDonald, 1993). Most of the Premier intrusions in the Upper Panel display potassic alteration and reddish hematite dusting, but are nearly barren of sulphides. Hydrothermal breccias and strongly altered wall rocks peripheral to the intrusions host the bulk of mineralization in the Upper Panel. First discovered in the 1930s, this mineralized zone was originally referred to as the Main Copper Zone. Alteration in the breccias and wall rock ranges from a dark purplish-brown proximal potassic assemblage with hydrothermal K-feldspar, fine-grained biotite, magnetite, and a relatively high chalcopyrite:pyrite ratio, to a chlorite – pyrite-dominant alteration, to a distal chlorite – epidote – calcite ± magnetite ± hematite propylitic assemblage.
The Upper Panel structurally overlies the thin “Middle Panel,” which is bounded by the STF and the Raewyn fault (RF), a minor thrust fault that terminates against the STF on the northeastern side of the deposit. The Middle Panel features Texas Creek (“Sulphurets”) suite plagioclase-hornblende-phyric diorite intrusions and small volumes of hydrothermal breccias, and hosts very little of the mineralization at Sulphurets. Hydrothermal alteration assemblages are limited to chlorite-dominant alteration in the diorite intrusions, and to weak hornfels ± chlorite in the sedimentary wall rocks and hydrothermal breccias that occur along the margins of diorite intrusions.
Finally, the “Lower Panel,” which occurs beneath the Middle Panel, hosts the bulk of the mineralization at Sulphurets. The Lower Panel is thought to be bounded at depth by the MTF, though the MTF is only intercepted at depth in a handful of deep drill holes. This panel was historically divided into several discrete mineralized zones, including, from southwest to northeast: the Canyon zone, the Breccia Gold zone, and the Raewyn Copper-Gold zone (Fowler and Wells, 1995). The majority of the gold and copper mineralization in the Lower Panel is found in the Breccia Gold and Raewyn Copper-Gold zones. The Raewyn Copper-Gold zone is primarily hosted in crackled and hornfelsed sedimentary wall rock partially affected by distinctive dark brown, biotite-rich potassic alteration. It has an apparent north-northeast strike and dips about 45° to the northwest, with approximate true dimensions of 1,000 m in strike, 550 m down dip, and up to 250 m in thickness. The Raewyn Copper-Gold zone remains open down dip and along strike to the northeast at depth. The Breccia Gold zone has a pipe-like geometry, approximately 100 m in diameter, and plunging ~50° to the west-northwest. It is thought to be hydrothermal in original, and features tourmaline-rich alteration, strong gold grades, and abundant pyrite and tennantite, but relatively low copper grades. Sedimentary wall rock from the Lower Panel features silica addition as well as potassic alteration, as evidenced through whole rock geochemistry results comparing wall rock from the Lower Panel and the comparatively weakly altered sedimentary wall rock of the Middle Panel.
Seabridge Gold Inc. | 7-8 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
The Lower Panel features two main types of Texas Creek suite intrusions: subporphyritic plagioclase-hornblende-phyric diorite intrusions, and porphyritic plagioclase-hornblende-K-feldspar-phyric monzodiorite dykes. The diorites typically feature 30-40 vol.% tabular plagioclase and hornblende phenocrysts, up to ~4 mm in length, in a fine-grained groundmass. Similar diorite intrusions are found at the Kerr, Mitchell, Snowfield, and Iron Cap deposits, where they are intimately associated with porphyry mineralization. However, the diorites at Sulphurets lack abundant porphyry style quartz vein stockworks, have lower pyrite contents, potassic and sericitic alteration facies are subordinate to chlorite-pyrite alteration, and their associated Cu-Au resources are much smaller. A significant proportion of the mineralization at Mitchell, Kerr, and Iron Cap is hosted within syn-mineral diorite intrusions, whereas at Sulphurets, mineralization typically occurs in the wall rocks immediately adjacent to, above and between the fingers of diorite.
Late, discontinuous veins, breccias, shear fillings, and patchy replacements similar to those in the Upper Panel occur throughout the Lower Panel fault block. A higher density of these late mineralized structures is reflected in average arsenic, lead, antimony and zinc concentrations being roughly two to three times those of the Upper Panel. Scattered, sub-meter to centimeter scale quartz and sulphide veins, breccia veins, shear fillings, patchy discontinuous clots or replacements and disseminations occur in all rock types except late dykes, but are most abundant in brecciated and crackled zones. They include coarse pyrite, carbonate, chlorite, quartz, occasionally with minor chalcopyrite, sphalerite, arsenopyrite or galena, and traces of tennantite. Native gold is rare but has been observed as sub-millimeter blebs and stringers in quartz-carbonate-sulphide veins, and chlorite-pyrite-carbonate breccia matrix fillings.
A small number of very thin, volumetrically insignificant post-mineral dykes with meter-scale widths cut all other lithologies at Sulphurets. These include northwesterly-dipping, fine-grained diabase dykes with aphanitic chilled margins and pervasive chlorite alteration, and two fine-grained, unaltered, black lamprophyre dykes dipping west-northwest. Similar post-mineral dyke sets are observed in the Kerr, Mitchell, and Iron Cap zones.
Brittle fracturing is widespread at Sulphurets, and multiple fault sets, ranging from shallow- to steeply-dipping, are found throughout the deposit. In addition to the east-vergent thrust faults, numerous small, north to northeasterly striking, steeply westerly dipping faults, fracture zones and shears cut through the district. Subvertical penetrative cleavage is found throughout much of the district, and is especially well developed in alteration facies rich in phyllosilicates and clays (Kirkham, 1963; Margolis, 1993; Febbo et al., 1995). At Sulphurets, the absence of significant rheologically weak sericitic alteration facies has resulted in the absence of the strong penetrative cleavage present at the Kerr, Mitchell, and Snowfield deposits. At Sulphurets, a northeasterly-striking, steeply dipping foliation is only observed in discrete areas with sericitic alteration (e.g., Fowler and Wells, 1995).
A geological map of the Sulphurets deposit, which also displays the extent of near-surface gold and copper mineralized zones, is found in Figure 7.5. Representative cross sections through the southwest and the centre of the Sulphurets deposit, showing lithological units, alteration assemblages, gold grade, copper grade, molybdenum grade, and silver grade are shown in Figure 7.6 and Figure 7.7, respectively.
Seabridge Gold Inc. | 7-9 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 7.5 Map of the Sulphurets deposit (Seabridge, 2019)
Notes: a) Geology map, showing principal intrusions, dykes, and hydrothermal breccias. Labeled faults include the Sulphurets Thrust Fault (STF), Raewyn Fault (RF), and the approximate trace of the Mitchell Thrust Fault (MTF). b) Map of the principal gold and copper mineralized zones within the Sulphurets deposit, along with the historical names of these zones. The locations of the major fault panels discussed in the text – the Upper, Middle, and Lower Panels – are also indicated.
Seabridge Gold Inc. | 7-10 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 7.6 Vertical cross-section through the Sulphurets deposit, looking ENE (Seabridge, 2019)
Notes: The traces of the Sulphurets Thrust Fault (STF), Raewyn Fault (RF), and Mitchell Thrust Fault (MTF) are shown. a) Simplified geology of the Sulphurets deposit, showing undifferentiated sedimentary wall rock (WR) and principal intrusions and breccias: diorite (DR), monzodiorite intrusions (MZD), hydrothermal breccia (BX), and diabase dyke (DB). See text for unit descriptions. The traces of drill holes occurring within ± 100 m of the section are shown as black lines. b) Simplified diagram of hydrothermal alteration zoning within the Sulphurets deposit, illustrating the extent of pervasive chlorite (CHL), propylitic (PRO), hornfels (HF), and hornfels with tourmaline (TO) alteration zones, as well as areas with quartz-sericite-pyrite overprint (SER). c) Ag grades from the Seabridge Gold EOY 2018 block model; d) Au grades from the EOY 2018 block model; e) Cu grades from the EOY 2018 block model; f) Mo grades from the EOY 2018 block model.
Seabridge Gold Inc. | 7-11 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 7.7 Vertical cross-section through the Sulphurets deposit, looking NNE (Seabridge, 2019)
Notes: The traces of the Sulphurets Thrust Fault (STF), Raewyn Fault (RF), and Mitchell Thrust Fault (MTF) are shown. a) Simplified geology of the Sulphurets deposit, showing undifferentiated sedimentary wall rock (WR) and principal intrusions and breccias: diorite (DR), monzonite (MZ), hydrothermal breccia of Middle Panel (BX1), Sulphurets Gold Breccia (BX2), brecciated margin of monzonite intrusions (BX3), and lamprophyre dyke (LM). See text for unit descriptions. The traces of drill holes occurring within ±100 m of the section are shown as black lines. b) Simplified diagram of hydrothermal alteration zoning within the Sulphurets deposit, illustrating the extent of pervasive chlorite (CHL), propylitic (PRO), hornfels (HF), hornfels with tourmaline (TO), hornfels with biotite (BI), potassic (POT; hydrothermal K-feldspar ± biotite ± magnetite), and mixed potassic (POTM) alteration zones. c) Ag grades from the Seabridge Gold EOY 2018 block model; d) Au grades from the EOY 2018 block model; e) Cu grades from the EOY 2018 block model; f) Mo grades from the EOY 2018 block model.
Seabridge Gold Inc. | 7-12 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
7.2.3 | Mitchell Zone |
The Mitchell Zone crops out in Mitchell Valley, through an erosional window exposing the footwall of the MTF. The zone is a roughly cylindrical gold-copper-molybdenum deposit, dipping ~60° to the northwest, with approximate true dimensions of 1,600 m in strike, 1,500 m down dip, and up to 850 m in thickness. It remains open down dip and along strike to the northeast at depth.
Recent glacial melt back has provided exceptional surface exposure of a gold-copper-molybdenum porphyry system. A zone of intense quartz and sulphide veining (“Sheeted Quartz Vein Zone”) forms resistant bluffs in Mitchell Valley. However, the higher-grade core area is mostly covered by talus and moraine west of the bluffs. Active oxidation and leaching of sulphides has produced prominent gossans and extensive copper sulphate precipitates at the surface.
Mineralization at the Mitchell deposit is genetically and spatially linked to the Early Jurassic Mitchell intrusive complex, which is composed of Sulphurets (Texas Creek) suite diorite, monzodiorite, and granodiorite stocks and dykes. The intrusive complex cuts sedimentary and volcanic rocks of the Upper Triassic Stuhini Group and sandstones, conglomerates, and andesitic rocks of the Lower Jurassic Jack Formation (basal Hazelton Group). The Mitchell complex has been subdivided into three major intrusive phases. “Phase 1” includes voluminous pre- to early-mineral plagioclase-hornblende diorite porphyry intrusions (196 ± 2.9 Ma and 189 ± 2.8 Ma; U-Pb zircon, Febbo et al., 2019) and a suite of westerly-striking and northerly-dipping monzodiorite dykes. “Phase 2” includes a syn-mineral granodiorite plug within the centre of the deposit (192 ± 2.8 Ma; U-Pb zircon, Febbo et al., 2019), which features abundant xenoliths of quartz veins and Phase 1 intrusions, as well as multiple westerly-striking and northerly-dipping granodiorite dykes in the centre and western half of the complex. Following Phase 2 magmatism, a suite of late-mineral breccia dykes was emplaced. Finally, “Phase 3” is made up of a small diorite plug, measuring 50 m by 125 m, which cuts the breccia dykes.
The successive intrusive phases were accompanied by the development of different hydrothermal alteration assemblages, veining and mineralization within the Mitchell deposit. Hosted by Phase 1 plutons, Stage 1 sheeted quartz – chalcopyrite – pyrite ± magnetite ± K-feldspar ± chlorite veins and stockworks contain most of the copper-gold mineralization, and are accompanied by proximal potassic to calc-potassic alteration and peripheral propylitic alteration. Stage 2 quartz – pyrite – chalcopyrite – molybdenite veining produced a molybdenum-enriched halo around the centre of the deposit (190.3 ±0.8 Ma; Re-Os molybdenite). The molybdenum halo is associated with sericite-pyrite alteration and is temporally related to a Phase 2 stock that outcrops central to the halo. Stage 3 consists of anhydrite veining, poorly mineralized massive pyrite veins, and shallow quartz – pyrophyllite advanced argillic alteration. Whereas the predominant copper-bearing mineral at Mitchell is chalcopyrite, a discrete bornite-bearing zone is found near the centre of the Mitchell Zone towards the hanging wall side. This “Bornite Breccia” was only intersected in three holes (including one interval of 86 m with 1.42% copper and 0.23 g/t gold), and the interpreted dimensions are about 400 m long down dip, 60 m thick, and 250 m along strike. Its geometry roughly aligns with the northwest plunging trend of the Mitchell deposit. The breccia is composed of a chaotic, swirly mix of crackled and milled light grey quartz, anhydrite and clay, with disseminated and interstitial pyrite, chalcopyrite, bornite, and minor tennantite and molybdenite. In deeper intersects the breccia transitions to a mostly quartz, anhydrite, pyrite, and chalcopyrite hosting structure with only traces of bornite. The breccia body is interpreted to be related to structurally controlled, late advanced argillic alteration. A similar breccia zone, with both bornite and abundant anhydrite, is found in the Kerr deposit.
Seabridge Gold Inc. | 7-13 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
The Mitchell deposit features many characteristics typical of gold-enriched calc-alkaline porphyry copper deposits: calc-alkaline syn-mineral intrusions; hydrothermal alteration assemblages that include deep potassic, peripheral propylitic, and extensive shallow sericitic alteration; and abundant quartz veining. Metals, chiefly gold and copper (in terms of economic value), are generally at low concentrations, finely disseminated, stockwork or sheeted veinlet controlled, and pervasively dispersed over dimensions of hundreds of metres. Grades diminish slowly over large distances; sub-economic grades are encountered at distances of several hundreds of metres beyond the interpreted centre of the system. This is distinct from the Sulphurets and Kerr zones, where there are more abrupt breaks in grade due to higher structural complexity and juxtaposition of weak and moderate grade domains by faulting, both syn-mineral structures controlling breccia contacts, and post-mineral faulting and displacements.
A small portion of the Mitchell Resource (less than 2%) is found in the hanging wall of the MTF, where disseminated and veinlet chalcopyrite occur in hydrothermal breccias, intrusion breccias, magnetite skarn and hornfels altered sediments and volcanics adjacent to non-mineralized Premier suite porphyritic monzonite to syenite intrusions 193.9 ± 0.5 Ma (Kirkham and Margolis, 1995). This portion of the deposit is more typical of alkalic porphyry deposits, with sodic-potassic alteration, relatively low quartz veining, and K-feldspar – magnetite – albite – pyrite – chalcopyrite – specularite veins. This style of mineralization is similar to that observed in the hanging wall of the STF at the Sulphurets deposit (Main Copper Zone).
The deposit was deformed during development of the mid-Cretaceous Skeena fold and thrust belt (SFTB), transforming portions of the deposit into intensely foliated, mylonitic zones, with deformed and flattened quartz veinlets. The main foliation generally strikes to the east-southeast, and dips moderately to the north. The intensity of the foliation and shortening varies within the boundaries of the Mitchell Zone, and is directly related to hydrothermal alteration assemblages. Sections of the deposit featuring rheologically weak rocks, such as strong sericitic alteration, exhibit the most shortening and deformation (Febbo et al., 2015). Furthermore, during SFTB development, Mitchell was severed along the MTF. This offset portion now lies approximately 1,600 m to the east-southeast in the hanging wall of the MTF (Snowfield Zone; Febbo, et al., 2015). Deep drill holes have also indicated the presence of a roughly 50 m thick, banded, mylonitic shear zone that may offset the base of the Mitchell deposit, termed the Basal Shear Zone (BSZ). The BSZ dips to the northwest and appears to parallel the MTF. As the Bornite Breccia and BSZ may have structurally offset portions of the Mitchell Zone, potential remains for additional mineralization to be discovered.
Seabridge Gold Inc. | 7-14 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
A geological map of the deposit is presented in Figure 7.8. A representative cross section and 500 masl level plan of the Mitchell deposit, showing lithological units, alteration assemblages, quartz vein abundance contours, gold grade, copper grade, and molybdenum grade, are shown in Figure 7.9 and Figure 7.10, respectively.
Figure 7.8 Geology Map of the Mitchell Deposit (Seabridge, 2019)
Source: (Seabridge, 2019)
Seabridge Gold Inc. | 7-15 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 7.9 Vertical section through the Mitchell deposit (Seabridge, 2019)
Notes: Location is shown as A-A’ Figure 7.9. The traces of the Mitchell thrust fault (MTF) and Mitchell basal shear zone (BSZ) are shown on each panel. a) Simplified geology of the Mitchell deposit, showing undifferentiated wall rock (gray), the Phase 1 diorite porphyry (pink), the sheeted vein body (red), Phase 2 granodiorite porphyry dykes (darker pink), and post-mineral dolerite dykes (dark green). The traces of drill holes occurring within ± 50 m of the section are shown as black lines. b) Simplified diagram of hydrothermal alteration zoning within the Mitchell deposit, illustrating the extent of potassic alteration, moderate and strong sericitic alteration (see text), as well as the occurrence of hydrothermal anhydrite; c) contours of logged volume percent of total quartz veins within Mitchell drill core; d) Au grades from the Mitchell block model, showing clear concentric zoning; e) block model Cu grades, showing a concentric zoning pattern similar to that of Au; and f) block model Mo grades, showing a zoning pattern with highest Mo grades rimming the central zone of high Au and Cu.
Seabridge Gold Inc. | 7-16 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 7.10 Plan view of the Mitchell deposit at 500 masl (Seabridge, 2019)
Notes: Location is shown as A-A’ Figure 7.10: a) simplified geology of the Mitchell deposit, showing undifferentiated wall rock (brown), the Phase 1 diorite porphyry (pink), the sheeted vein body (red), Phase 2 granodiorite porphyry dykes (darker pink), quartz-anhydrite-bornite hydrothermal breccia zone (orange), post-mineral dolerite dykes (dark green); drill hole traces in a 50 m envelope are also shown as black lines; b) simplified diagram of hydrothermal alteration zoning within the Mitchell deposit, illustrating the extent of potassic alteration, moderate and strong sericitic alteration, as well as the occurrence of hydrothermal anhydrite; c) contours of logged volume percent of total quartz veins within Mitchell drill core; d) Au grades from the Mitchell block model, showing clear concentric zoning; e) block model Cu grades, showing a concentric zoning pattern similar to that of Au; and f) block model Mo grades, showing a zoning pattern with highest Mo grades rimming the central zone of high Au and Cu.
Seabridge Gold Inc. | 7-17 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
7.2.4 | Iron Cap Zone |
The Iron Cap deposit is the northernmost porphyry gold-copper-molybdenum deposit in the KSM district, and occurs structurally above the Mitchell deposit, in the panel of rocks between the MTF and STF. It is now known to be hosted by an Early Jurassic intrusive complex that is roughly contemporaneous with those in the Mitchell and Kerr zones. The Iron Cap mineralized zone forms a tabular body striking roughly north-south and dipping ~60° to the west, with approximate true dimensions of 1,500 m in strike, 1,500 m down dip, and up to 800 m in thickness. Mineralization remains open down dip.
Only the southern and eastern margins of the Iron Cap deposit outcrop at surface, where weak to moderate gold + copper ± molybdenum mineralization is primarily hosted in sedimentary strata of the Hazelton Group. It is now known that Iron Cap glacier covers the central and northern portions of the deposit, and that the western side of the deposit is concealed beneath the largely barren hanging wall of the STF. Drilling campaigns during the 2016, 2017, and 2018 field seasons, which included drill holes that collared on the glacier and on the ridge to the west of Iron Cap, significantly expanded the known resource at Iron Cap.
The Early Jurassic Iron Cap intrusive complex is composed of multiple intrusion and breccia phases. One of the earliest phases is a pre-mineral, medium-grained plagioclase-hornblende-phyric diorite with porphyritic texture found on the southeast side of the complex (“P2 East”). A second plagioclase-hornblende-phyric diorite phase, finer-grained than the pre-mineral diorite, is located in the northwest of the complex (“P2 West”). The P2 West phase is thought to be syn-mineral, as it hosts significant volumes of early quartz-sulphide veins (A-type and B-type veins, based on the vein classification scheme of Gustafson and Hunt, 1975), and because this diorite phase is spatially associated with some of the highest gold and copper grades observed at Iron Cap. Syn-mineral, plagioclase-K-feldspar-hornblende(-quartz)-phyric monzonite intrusions (“P3 East”) occur in the central to eastern parts of the Iron Cap intrusive complex. The P3 East monzonites are typically medium-grained, with seriate texture, and include a number of thin dykes as well as a ~100 m thick tabular intrusion striking roughly north through the centre of the Iron Cap deposit, and dipping ~60° west. As with the syn-mineral diorite, portions of the P3 East monzonite host significant volumes of early quartz-sulphide A-type and B-type veins and strong gold-copper mineralization. Finally, a suite of weakly-mineralized monzonite dykes and intrusions, coarser-grained than the central syn-mineral monzonite, occurs on the western side of the intrusive complex (“P3 West”). A radiometric U-Pb zircon age of 195.4 ± 2.1 Ma was obtained for the P3 East monzonite, which is in line with the other radiometric ages obtained for porphyry emplacement and mineralization within the Sulphurets district (190.3 ± 0.8 Ma to 197 ± 3 Ma; Bridge, 1993; Margolis, 1993; Febbo et al., 2019a; Febbo et al., 2019b). Unfortunately, U-Pb zircon age dating is not possible for the diorite intrusive phases at Iron Cap, as they do not contain zircon as an accessory mineral. The relative ages of the P2 West, P3 East, and P3 West intrusions are also unclear, due to the lack of cross-cutting relationships, but they are assumed to be roughly contemporaneous.
Seabridge Gold Inc. | 7-18 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Mineralized hydrothermal breccias are significantly more abundant and voluminous at Iron Cap than at the Mitchell, Sulphurets, or Kerr deposits. Tabular, steeply dipping and northerly striking mineralized hydrothermal breccia bodies, ranging from ~10 m to ~250 m wide, occur within central Iron Cap. The breccias are matrix-supported and contain poorly-sorted subangular clasts. The clasts within the breccias are commonly too altered to permit protolith identification, but clasts of P3 monzonite are sometimes observed. Jigsaw hydrothermal breccias are also common along the margins of the P2 East intrusion, with subangular to angular monomict clasts of the P2 East intrusion in a hydrothermally-altered rock flour matrix.
Post-mineral intrusions in the Iron Cap intrusive complex are limited to a small number of volumetrically insignificant dykes. K-feldpar-phyric monzodiorite dykes have been identified in the northern half of Iron Cap. These plagioclase-K-feldspar-hornblende-phyric dykes contain plagioclase and hornblende phenocrysts up to 8 mm and K-feldspar phenocrysts up to 2 cm, and closely resemble the post-mineral K-feldspar megacrystic dykes observed at the Kerr deposit. In the Sulphurets district, these dykes are thought to represent the last pulse of the Early Jurassic porphyry magmatic system. Rare aphanitic, mafic to ultramafic, dark green to blackish post-mineral dykes with meter-scale thicknesses also occur. These dykes are common throughout the rest of the Sulphurets district and may have been emplaced during Cretaceous deformation.
The Iron Cap deposit features hydrothermal alteration assemblages typical of porphyry Cu-Au deposits, including deep, central potassic alteration with an assemblage of K-feldspar – magnetite ± biotite (now chloritized), weak peripheral propylitic alteration with an assemblage of chlorite – epidote – carbonate ± hematite ± magnetite, and sericitic alteration. Potassic alteration is most commonly observed in the P2 West, P3 East and P3 West intrusions, as well as the deep hydrothermal breccias. Sericitic alteration zones, featuring an assemblage of fine-grained muscovite or illite – quartz – pyrite, are concentrated in the upper half of the deposit as well as within the hydrothermal breccias. The intensity of the sericitic alteration varies from the replacement of felsic minerals, to the partial replacement of mafic minerals, to the complete and texturally destructive replacement of all primary felsic and mafic phenocrysts. Strong sericitic alteration obliterates most original textures, making protolith identification difficult in places. Though present in overall minor quantities, the greatest abundances of galena, sphalerite, and silver or arsenic sulphosalts are found in the upper half of the Iron Cap Zone, and may be a consequence of telescoping or downward migration of the hydrothermal system. Hydrothermal anhydrite, which occurs abundantly in certain parts of the Kerr and Mitchell deposits, is conspicuously absent at Iron Cap.
Total quartz vein abundances at Iron Cap typically range from <1 vol.% to ~5 vol.%. However, a handful of discrete, narrow zones at Iron Cap feature notably high (>10 vol.%) abundances of sheeted A-veins, which correspond to zones of particularly elevated gold and copper grades. Such zones are notably observed within the P3 East and P2 West intrusive phase. The vein types present at Iron Cap include: early quartz – chalcopyrite ± magnetite “A-veins”, magnetite ± chalcopyrite veins with selvedges of pink hydrothermal K-feldspar ± magnetite; quartz – chalcopyrite ± molybdenite ± pyrite “B-veins,” with a distinctive sulphide-bearing central suture surrounded by quartz; gray quartz veinlets with a variable sulphide-sulphosalt assemblage of pyrite ± tennantite ± tetrahedrite ± chalcopyrite ± sphalerite, which crosscut the earlier A-veins and B-veins; pyritic “D-veins” with sericite-pyrite selvedges; and post-mineral quartz – carbonate ± chlorite ± sphalerite ± galena ± chalcopyrite ± tennantite ± tetrahedrite veins, which are thought to be associated with mid-Cretaceous deformation. High silver values are generally associated with presence of galena and sphalerite.
Seabridge Gold Inc. | 7-19 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Microscopic examinations of polished thin sections confirm that Iron Cap was also subjected to post-mineral deformation, as evidenced by widespread mylonitic textures.
The Iron Cap Zone terminates at the south along the north-dipping Iron Cap Fault (ICF). South of the fault, hornfelsed sediments are mineralized with marginal gold and copper grades similar to intervals above the MTF at Mitchell. A few holes through this area contain higher than average molybdenum grades, including in interval of 133 m with 0.10% molybdenum.
A geological map of the deposit is presented in Figure 7.11. A representative cross section and 1200 masl level plan of the Iron Cap deposit, showing lithological units, alteration assemblages, quartz vein abundance contours, gold grade, copper grade, and molybdenum grade, are shown in Figure 7.12 and Figure 7.13, respectively.
Figure 7.11 Iron Cap geology map. The traces of the Sulphurets Thrust Fault (STF), Johnstone Fault (JF), and Iron Cap Fault (ICF) are shown. (Seabridge, 2019)
Seabridge Gold Inc. | 7-20 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 7.12 Vertical cross-section through the Iron Cap deposit, looking NNE (Seabridge, 2019)
Notes: Location of section is shown on Figure 7.12. The traces of the Sulphurets Thrust Fault (STF) and the Iron Cap Fault (ICF) are shown. a) Simplified geology of the deposit, showing undifferentiated wall rock (WR) and the principal intrusions and breccias of the Iron Cap intrusive complex: P2 East (P2E), P3 West (P3W), P3 East (P3E), and hydrothermal breccias (BX). See text for unit descriptions. The traces of drill holes occurring within ±100 m of the section are shown as black lines. b) Hydrothermal alteration zoning illustrating the extent of potassic (POT.), moderate sericitic (MOD. SER.) and strong sericitic (STR. SER.) alteration assemblages (see text), as well as the extent of arsenic concentrations >50 ppm; c) contours of logged volume percent of total quartz veins within drill core; d) Au grades from the Seabridge Gold EOY 2018 block model; e) Cu grades from the Seabridge Gold EOY 2018 block model; and f) Mo grades from the Seabridge Gold EOY 2018 block model.
Seabridge Gold Inc. | 7-21 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 7.13 Plan view through the Iron Cap deposit at 1200 m elevation (Seabridge, 2019)
Notes: The traces of the Sulphurets Thrust Fault (STF), Johnstone Fault (JF), and Iron Cap Fault (ICF) are shown. a) Simplified geology of the deposit, showing undifferentiated wall rock (WR) and the principal intrusions and breccias of the Iron Cap intrusive complex: P2 East (P2E), P2 West (P2W), P3 West (P3W), P3 East (P3E), hydrothermal breccias (BX) and post-mineral K-feldspar megacrystic dykes (P4). See text for unit descriptions. The traces of drill holes occurring within ±100 m of the section are shown as black lines. b) Hydrothermal alteration zoning illustrating the extent of potassic (POT.), moderate sericitic (MOD. SER.) and strong sericitic (STR. SER.) alteration assemblages (see text), as well as the extent of arsenic concentrations >50 ppm; c) contours of logged volume percent of total quartz veins within drill core; d) Au grades from the Seabridge Gold EOY 2018 block model; e) Cu grades from the Seabridge Gold EOY 2018 block model; and f) Mo grades from the Seabridge Gold EOY 2018 block model.
Seabridge Gold Inc. | 7-22 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
8.0 | DEPOSIT TYPES |
Porphyry copper ± gold ± molybdenum systems are defined as large volumes (~10 km3 – 100 km3) of mineralized and hydrothermally altered rocks centered on porphyry intrusions (Sillitoe, 2010). Porphyry systems are generated at convergent plate margins and along magmatic arcs above subduction zones. These systems typically span the uppermost ~4 km of the crust (Singer et al., 2008), with their stocks and dykes connecting downwards to deeper parental magma chambers that double as the source of high-temperature, high-pressure metalliferous fluids for the system (e.g., Cloos, 2001). The parental magmas are water-rich, highly oxidized, and exceptionally sulphur-enriched, and range in composition from granite to diorite to monzonite (e.g., Sillitoe, 2010). A metal-rich aqueous phase is released from cupolas atop the parental chambers during cooling and fractionation, and is episodically transported upward along with porphyry dykes. As they rise, the magmas and fluids undergo drastic temperature, pressure, and chemical changes that result in the precipitation of metals and formation of distinctive hydrothermal mineral assemblages in an upward and outwardly zoned pattern.
The KSM deposits display many diagnostic features of porphyry Cu ± Au ± Mo systems. The deposits are centered on intrusive complexes composed of Early Jurassic, Texas Creek suite porphyry stocks and dykes, like the Kerr, Mitchell, and Iron Cap Zones which display the typical lateral and vertical zoning sequence of alteration assemblages observed in many porphyry systems: deep central potassic alteration, peripheral propylitic alteration, and shallow sericitic alteration. Mineralization is associated with quartz veinlet stockworks and sheeted quartz veinlet arrays, with vein density decreasing in later phases. Host rocks may be mineralized for up to several hundred meters from the intrusions. The Kerr and Mitchell zones also feature small remnants of advanced argillic alteration. The structurally complex Sulphurets deposit does not feature the same clear alteration zoning patterns observed at the other three deposits, due to its dismembered and fragmental nature. However, the Lower Panel fault block at Sulphurets, which hosts the bulk of the mineralization, features potassic alteration and mineralization typical of porphyry Cu ± Au ± Mo systems.
Other large gold-enriched porphyry copper deposits, comparable to those in the KSM district, include Pebble (Alaska), Bingham (Utah), Grasberg (Indonesia), and Galore Creek (British Columbia). The KSM district porphyry Au-Cu-Mo deposits feature large volumes of plagioclase-hornblende-phyric diorite that is intimately associated with mineralization and smaller volumes of more evolved magmas, including granodiorite and monzodiorite dykes. Diorite is at the mafic end of the compositional spectrum of magmas commonly associated with porphyry Cu ± Au ± Mo formation. Another example of a gold-enriched porphyry copper deposit with syn-mineral diorite intrusions is Cerro Casale, Chile (e.g., Palacios et al., 2001).
Seabridge Gold Inc. | 8-1 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Porphyry Cu ± Au ± Mo systems are subdivided into two categories: calc-alkaline and alkaline Cu ± Au ± Mo deposits. The KSM district deposits mainly display features that are characteristic of calc-alkaline porphyry Cu ± Au ± Mo deposits: high quartz vein volumes, strong pyrite mineralization, strong sericitic alteration, and an association with calc-alkaline intrusions. However, discrete zones within the district, restricted to fault panels that have been thrust over the main deposits, display characteristics consistent with alkalic style porphyry mineralization. These zones include the hanging wall of the MTF above the main Mitchell deposit, as well as the Upper Panel fault block of the Sulphurets deposit in the hanging wall of the STF. These alkalic-style zones contain largely barren porphyritic monzonite to syenite intrusions with potassic alteration and reddish hematite dusting, surrounded by volcano-sedimentary wall rock and hydrothermal breccias that contain weak to moderate copper-gold mineralization. The alkalic-style mineralized zones represent only a very minor portion of the total district resource.
The principal sulphides observed in the KSM deposits are pyrite and chalcopyrite, with minor molybdenite, and trace amounts of sphalerite, galena, tennantite-tetrahedrite, bornite, enargite, and arsenopyrite. Magnetite and hematitized magnetite are common, especially in deeper parts of the deposits, and hydrothermal anhydrite is common in certain areas of the Kerr and Mitchell deposits. Native gold is rarely observed macroscopically, and primarily occurs as microscopic clusters at sulphide grain boundaries or as inclusions. All mineralization is hypogene, except for a small remnant of preserved supergene mineralization at the upper limits of the Kerr deposit where chalcocite coatings on pyrite and chalcopyrite have been observed, and at the Main Copper (Sulphurets) occurrence where a remnant of leached capping and partial oxide mineralization is preserved at the highest elevations.
Seabridge Gold Inc. | 8-2 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
9.0 | exploration |
This section summarizes Seabridge’s 2011 through 2019 non-drilling exploration programs at KSM. Since 2006, the majority of Seabridge’s exploration activities have been focused on various drilling programs that were designed to test recognized mineralized zones as well as several exploration targets. The following sections summarize by year various non-drilling exploration activities that Seabridge has completed.
9.1 | 2011 Geophysical Exploration Program |
A Spartan MT (magneto telluric) survey was carried out by Quantec Geoscience Limited, over a period of 37 days from July 21, 2011 to August 26, 2011. A total of 175 MT Logger sites at an average spacing of 500 m were completed covering the KSM property from Kerr to Iron Cap zones and tunnel route north of the KSM grid. The data were collected over a frequency range of 320 Hz to 0.001 Hz with variable site spacing. The exploration objectives of the Spartan MT survey at the KSM Property were to detect mineralization and/or associated alteration zones, establish an understanding of the geological system and fluid pathways to great depth, and generate a 3D geophysical model by MT data to integrate with KSM geological model.
9.1.1 | Results of 2011 Geophysical Program |
The 3D inversion results indicate that the subsurface resistivity, from the surface to a depth of approximately 2 km, varies over a range of 100 Ωm to 5000 Ωm. The southern half of the KSM property reveals a large conductive body with a thickness of more than 2 km, interpreted to be a large magmatic intrusion and favourable for porphyry system. The central and northern parts of the KSM Property show relatively shallow conductive zones with thickness of approximately 500 m and are associated with alteration zones, which are the results of large scale thrust faulting in the area. The resistivity model also helped to map a number of sub-parallel faults and lineaments.
9.2 | 2013 Geophysical Exploration Program |
SJ Geophysics Ltd. was contracted to acquire geophysical data in several boreholes at KSM for Seabridge. Borehole total magnetic field, induced polarization (IP), and time domain electromagnetic (TDEM) techniques utilizing SJ Geophysics’ borehole Volterra-EM system were conducted on five drill holes at the Kerr, McQuillan, and Iron Cap zones. The objectives were to determine if the known deposit zones have an electromagnetic and/or magnetic signature and to identify if there is a relation between quantities of magnetite and gold-copper mineralization.
Seabridge Gold Inc. | 9-1 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
9.2.1 | Results of 2013 Geophysical Program |
The EM data did not identify any strong conductors in the holes surveyed. Based on the current holes surveyed, there does not appear to be an EM response to the deposit. In borehole K-13-24, a weak off-hole EM anomaly was identified that is believed to correlate with a low resistivity zone. Unfortunately, IP data were not collected in this hole, so this cannot be verified. In drill hole K-13-25, chargeability was found to increase with depth, and more chargeable rocks are located towards the east of the drill hole.
In borehole MQ-13-06, the total field magnetic data show three major magnetic units are present. Two off-hole EM anomalies were identified, with the larger one being located at approximately 850 m and to the southeast of the drill hole, mostly likely within 50 m to 100 m. Again, this conductor was poorly coupled. It may be better to use smaller, more focused loops in the future.
In the Iron Cap zone, boreholes IC-13-48 and IC-13-49 showed very good agreement between each other. From the magnetic data, the boundaries of a relatively constant magnetic unit were identified. This unit correlates with a low resistivity and high chargeability unit based on the IP data. It is believed that this may be a mineralized zone. The IP data from IC-13-48 indicates that more chargeable rocks are located towards the east and south of the drill hole.
S.J.V. Consultants Ltd. (SJV) was retained to review and interpret all historical geophysical data with the intention of identifying characteristic signatures that might be related to observed mineralization and geology. The IP data were reviewed and input to the UBC 2D resistivity and IP inversion algorithms, with the aim of improving the available models by using more modern algorithms as well as a finer cell size. The output models show some significant differences from the previous results and also have significantly better resolution of features at depth, as a result of the finer cell size.
The Kerr deposit overlies a resistive body but is itself hosted within a moderately conductive zone, close to the background level. There are no available IP or magnetic data for this area. The Sulphurets deposit also sits on the margins of a resistive body. The more detailed IP resistivity identified a narrow, dipping conductive zone that correlates very well with the actual mineralization. The magnetic susceptibility in this area is moderate. The Mitchell deposit is located along a conductive feature that correlates well with Mitchell creek. This is interpreted to represent a fault zone that may have provided a pathway for mineralizing fluids and/or intrusions. Mitchell sits within a clear magnetic low, which is interpreted to represent magnetite-destructive alteration. The Iron Cap deposit is located within an area of high chargeability, but was not well defined on either the MT or IP resistivity data. The mineralization sits on the boundary of a large magnetic high that has significant roots in the 3D inversion.
The most direct correlation between the geophysics and the mineralization occurred at the Mitchell deposit, which is hosted by a prominent magnetic low, interpreted to be a result of magnetite-destructive alteration. Other magnetic lows within the property are therefore considered high priority targets. The 2D IP provides better resolution of the resistivity at relatively shallow depths than the MT survey, which is focused on deep exploration. Interpretation of the IP was somewhat limited as the survey covers only the northern portions of the KSM area and the lines are spaced too far apart to allow good correlation of features between lines. The relationship of the mineralization to the IP resistivity and chargeability was variable and complicated. Low resistivity features within high chargeability zones could be correlated to the mineralization at the Sulphurets deposit and are therefore recommended as possible future targets.
Seabridge Gold Inc. | 9-2 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
9.3 | 2014 Geophysical Exploration Program |
Quantec Geoscience Ltd. was contracted to perform Spartan MT and AMT (audio magneto telluric), gravity, and IP surveys over the Property. The MT/AMT survey was designed to expand coverage of the 2011 survey and selectively infill areas at a higher resolution with readings at approximately 250 m spacings. Gravity readings were collected at the same survey sites. Two east-west lines of IP surveying were made, one in Sulphurets valley and one in Mitchell valley.
9.3.1 | Results of 2014 Geophysical Programs |
The gravity survey utilized a L&R Model G743 Base station, and the Geosoft Reduction processing platform with density of 2.65 g/cc. Corrections were made for latitude, terrain (regional and local), free-air anomaly calculation, and bouguer anomaly calculation. There were a total of 154 readings unevenly distributed over an area of about 75 skm2. The strong correlation between high readings and high topography suggests the topography is too extreme and the model too coarse to resolve and interpret the data correctly.
The Spartan MT survey utilized the same equipment and parameters as the survey done in 2011. A total of 49 readings produced acceptable results, and 23 readings were rejected due to excessive “noise”. Attempts to obtain readings on permanent snow and ice were unsuccessful, so the area covered was not expanded significantly from 2011.
IP surveying was performed on east-west lines of about 5 km each in the bottom of Sulphurets and Mitchell valleys, to reach the minimum elevation penetration of the survey. In Sulphurets valley, a strong chargeability response occurs east of the trace of the Sulphurets thrust fault and reflects continuity of pyritic alteration between Kerr and Sulphurets deposit. Similarly, in Mitchell valley high chargeability responses occur east of the STF trace.
9.4 | 2015 Geophysical Exploration Program |
Precision Geosurveys Inc. was contracted to run a helicopter supported magnetic and radiometric survey covering almost all of the KSM claims, to improve resolution of the subsurface geological model in undrilled areas. The magnetic sensors are flown in a non-magnetic and non-conductive nose stinger configuration with 3D compensation, which allows the survey to be safely flown at reduced terrain clearance to minimize noise, improve resolution, and reduce the need for complex corrections to the data. The survey covered an area of about 1,600 km2. at a flight line spacing of 100 m. KSM mineralized areas are reflected by low susceptibilities where overprinting phyllic alteration has converted magnetite to pyrite, and high susceptibilities where potassic alteration with magnetite is still preserved.
Seabridge Gold Inc. | 9-3 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
9.5 | 2019 Geophysical Program |
During 2019, Geotech Ltd. carried out a helicopter-borne geophysical survey which included a caesium Z-axis tipper magnetometer, which is known as a Z-Axis Tipper Electromagnetic (ZTEM) system, a GPS navigation system and a radar altimeter. In a ZTEM survey, a single vertical-dipole air-core receiver coil is flown over the survey area in a grid pattern, similar to regional airborne EM surveys. Two orthogonal, ferrite-core horizontal sensors are placed close to the survey site to measure the horizontal EM reference fields. Data from the three sensors are used to obtain the Tzx and Tzy tipper components at six frequencies in the 30 Hz to 720 Hz band. The ZTEM is useful in mapping geology using resistivity contrasts and magnetometer data provides additional information on geology using magnetic susceptibility contrasts. The survey covered an area of 190 km2. with a total of 1,000 line km flown at a 200 m spacing in an east-west direction. The survey was carried out between July 25 to September 8, with 23 days lost to weather, 10 due to equipment malfunctions, and 9 survey days flown.
In July and August, Dias Geophysical Ltd. was contracted to perform an IP survey over part of the Sulphurets zone area extending westward, to assist in mapping sulphide distributions and orientations in the area of drill testing, covering 3 km2. The survey utilized a continuously rolling distributed array pole-dipole using the common voltage reference (CVR) method, using a 200 m line spacing and a receiver spacing of 100 m. This approach has inherent flexibility in calculating multi-scale dipoles from the acquired data. The survey data can be processed in the conventional fashion, in which 50 m dipoles are calculated for the entire survey. If the signal to noise ratio is found to be too low the data can be reprocessed to increase the dipole separation to 200 m or 400 m to increase the ratio. The southeast corner of the survey covered a portion of the Sulphurets zone beneath the STF, and high chargeability features correlate very well with the modelled sulphide distribution previously determined from drilling. The exploration area targeted in 2019 above the STF displayed more limited and discontinuous high chargeability areas, which drilling confirmed were due to high concentrations of pyrite with minor chalcopyrite in veins, disseminations and patchy replacements associated with skarn alteration near intrusive/wall rock contact zones.
Mira Geoscience was contracted to undertake a regional district scale integrated model and targeting exercise for KSM, including the compilation of all digital exploration data and construction of an integrated 3D geological and structural model, as a basis for constrained inversion of magnetics, MT and IP surveys data. Modelling is based on available historical data, literature, geology, structures, geochemistry and geophysics datasets provided by Seabridge. The integrated 3D model was used to produce a set of targets based on a porphyry deposit concept involving both knowledge driven, and data driven (machine learning) analysis of the data and model.
Deep penetrating geophysical techniques were employed to improve resolution on targets and generate discrete zones for testing in the future. New ZTEM surveys and 3D IP surveys were completed. Data was integrated into a digital 3D earth model by Mira Geoscience. These results are now being integrated with historical MT surveys, airborne high-resolution magnetic survey, bore hole geophysical surveys and geological mapping. Geophysical profiles indicate that these targets can be tested from surface but would likely be evaluated as bulk underground opportunities.
Seabridge Gold Inc. | 9-4 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
10.0 | Drilling |
10.1 | Introduction |
Drilling methods, procedures, extent of drilling, and relevant results for the Property were described in previous NI 43-101 Technical Reports prepared by the QP responsible for this section of this Report (Lechner 2007; 2008a; 2008b; 2009; 2010; 2011; 2012; 2014, and 2016). Plan maps and representative drill hole cross sections through the mineral deposits are shown in Figures 7.2, 7.5, 7.8, 7.11, 14.4 to 14.7, 14.12 to 14.15, 14.20 to 14.23, and 14.28 to 14.31 to illustrate a summary and interpretation of the drilling results.
The majority of KSM drilling information that is stored in the end-of-year 2019 AcQuire database was collected by Seabridge (86%). Seabridge has conducted annual drilling campaigns at KSM beginning in 2006. The remaining 14% of the drilling data were collected by Placer (8%) and Falconbridge/Noranda (about 1%), with the remainder collected by six other companies (5%). The 2005 Falconbridge drill campaign was conducted as a joint venture with Seabridge. A summary of all KSM drill hole data organized by year is shown in Table 10.1. The majority of the 742 core holes shown in Table 10.1 were used to estimate Mineral Resources disclosed in this Report, but some of the data tested several non-resource targets in the KSM Property. Table 10.2 summarizes drilling data by company through 2018. The companies listed in Table 10.2 have been arranged in approximate chronological order starting with Esso Minerals in the 1960s. Minor core drilling was completed at KSM by several companies in the early 1980s, but ramped up significantly in the late 1980s and early 1990s by Placer Dome. Seabridge systematically added to the KSM drill hole data after their entry into the district in 2000, with annual drill campaigns beginning in 2005.
Seabridge Gold Inc. | 10-1 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Table 10.1 KSM Historic Drilling Through 2019
Table 10.2 Historic Drilling by Company Through 2018
Seabridge Gold Inc. | 10-2 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Table 10.3 summarizes drilling at KSM by deposit and company through 2018. The data shown in Table 10.3 are the drill holes that were used to estimate Mineral Resources that are the subject of this Report.
Table 10.3 KSM Drill Hole Summary by Area and Company Through 2018
Seabridge Gold Inc. | 10-3 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
10.2 | Type and Extent of Drilling |
Seabridge contracted Boart Longyear to complete the initial 2006 core drilling program. Since then, Hy-Tech Drilling Ltd. from Smithers, BC has completed all of Seabridge’s Mineral Resource definition core drilling at KSM through 2018 using their own manufactured Tech-5000 Fly Rigs. Drilling was completed using either HQ or NQ tools. Helicopter support for Seabridge’s KSM exploration programs has been provided by Lakelse Air Ltd. from Terrace, BC since 2007. This long-standing relationship with local drilling and air support contractors has allowed for a continually growing understanding about local drilling conditions. The drilling operations were conducted from the Sulphurets Creek camp which is located northwest of the Kerr deposit.
In 2019 Seabridge contracted with Driftwood Diamond Drilling out of Smithers, BC to complete a 26-hole diamond core drilling program at the Sulphurets deposit. Those holes were not used to estimate Mineral Resources that are the subject of this Report because the results were not available at the time this report was written.
Figure 10.1 is a drill hole location map for the entire KSM district, showing all of the drilling data that were available to estimate Mineral Resources that are the subject of this Report (drilling through 2018). The drill holes are colour coded (blue represents non-Seabridge and red represents Seabridge drilling). Detailed drill hole location maps are presented in Figures 10.2 to 10.5 for the Kerr, Sulphurets, Mitchell, and Iron Cap deposits, respectively. Figures 10.2 to 10.5 also show the outline of conceptual resource pits and resource block cave that define the Mineral Resources for the Property.
Seabridge Gold Inc. | 10-4 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 10.1 KSM Drill Hole Locations
Source: (RMI, 2019)
Seabridge Gold Inc. | 10-5 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 10.2 Drill Hole Locations – Kerr Deposit
Source: (RMI, 2019)
Seabridge Gold Inc. | 10-6 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Drilling at the Kerr deposit has identified a mineralized area measuring roughly 2,400 m north-south by 800 m east-west, and about 2,200 m vertically. The drill hole spacing in the upper open pit resource area is approximately 50 m to 75 m. Drill hole spacing through the block cave resource, which has been classified as nearly all Inferred material, ranges between 100 m to 200 m. Representative drill hole cross sections and level maps through the Kerr deposit are shown in Figures 14.4 to 14.7.
Figure 10.3 Drill Hole Locations – Sulphurets Deposit
Source: (RMI, 2019)
Drilling at the Sulphurets deposit has identified a mineralized area measuring roughly 2,200 m northeast-southwest by 550 m northwest-southeast, and about 330 m vertically. The drill hole spacing in the open pit resource area ranges between 50 m to 75 m. Figures 14.12 to 14.15 show representative drill hole cross sections and level maps through the Sulphurets deposit.
Seabridge Gold Inc. | 10-7 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 10.4 Drill Hole Locations – Mitchell Deposit
Source: (RMI, 2019)
Seabridge Gold Inc. | 10-8 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Drilling at the Mitchell deposit has identified a mineralized area measuring roughly 1,600 m east-west by 1,500 m down-dip, and 850 m thick. The drill hole spacing in the upper open pit resource area is approximately 75 m to 100 m. Drill hole spacing through the block cave resource, which has been classified predominantly as Inferred material, ranges between 100 m to 200 m. Representative drill hole cross sections and level maps are shown in Figures 14.20 to 14.23.
Figure 10.5 Drill Hole Locations – Iron Cap Deposit
Source: (RMI, 2019)
Seabridge Gold Inc. | 10-9 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Drilling at the Iron Cap deposit has identified a mineralized area measuring roughly 1,500 m northeast-southwest, by 1,500 m northwest-southeast, and about 850 m thick. The drill hole spacing in the upper block cave resource shapes ranges from 70 m to 75 m. Drill hole spacing through the lower block cave resource, which has been classified predominantly as Inferred material, ranges from 100 m o 200 m. Representative drill hole cross sections and level maps through the Iron Cap deposit are shown in Figures 14.28 to 14.31.
10.3 | Drilling Procedures |
As mentioned in Section 10.1, all of the drilling data collected between 2007 and 2018 was completed by one drill contractor, Hy-Tech Drilling Ltd. located in Smithers, BC. The drilling was completed using Hy-Tech’s Tech-5000 Fly Rigs utilizing HQ, NQ, BQ, and AQ rods. Nearly all of the helicopter support was provided by Lakelse Air Ltd. using Eurocopter A-Star machines. Drilling operations were conducted from the Sulphurets Creek camp, which is located northwest of the Kerr deposit.
Seabridge used directional drilling and conventional wedging methods for a portion of some of their deeper drilling programs at Kerr, Iron Cap, and Mitchell. Tech Directional Services Inc. from Ontario, Canada were contracted to provide directional drilling services using DeviDrill equipment. DeviDrill uses a steerable wireline core barrel that allows a “daughter” hole to be wedged off of a “mother” hole and vectored towards a target zone with reasonable accuracy. Small diameter core (AQ) was retrieved during the crucial turn away from the mother hole so minimal data was lost. Bearing and inclination data were collected using a miniature electronic single-shot survey tool (DeviTool PeeWee) that is designed to pass through the DeviDrill bit. Information regarding this drilling method can be found at http://www.techdirectional.com/. Drill holes with a letter designation after the hole number represent wedged drill holes that utilized the directional drilling method. A total of 34 daughter holes were wedged off mother holes totalling approximately 25,253 m.
Drill core was placed into wooden core boxes by the drill contractor at the rig and delivered twice daily by helicopter from the rigs to Seabridge’s Sulphurets Creek camp. An inventory of the core was completed by Seabridge geologists, which included a review of core condition, a check of run block depths, and generation of a quick down-hole lithologic log.
The drill core was typically scanned for various base metal quantities using a Niton hand held x-ray fluorescence (XRF) analyzer prior to cleaning the core. Seabridge has determined that a factor of 2.0 to 2.2 times the Niton copper reading closely approximates the assayed copper content percentage. The Niton readings are primarily used to alert/train the logging geologist about apparent mineralized intersections. That data was written on the core with wax markers and are visible on core photos. Magnetic susceptibility was also recorded for each drill hole using a handheld device. The mag readings were exported from the device as .csv files, but the data is not currently being used.
After cleaning, the core was logged for lithology, alteration, structure, and oxidation state onto paper logs by Seabridge geologists. That information was later entered into Microsoft Excel® spreadsheets by each logger. Separate paper logs were used to capture geotechnical information like core recovery, rock quality designation (RQD), and fracture count. The geotechnical logs are based on data between core run blocks.
Seabridge Gold Inc. | 10-10 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Assay samples were laid out by the logging geologist. Samples were primarily laid out in 2-m lengths, but were broken at distinct lithologic, alteration, or mineralization contacts. Likewise, samples were broken at core diameter changes. The sample data were hand recorded onto paper logs with hole name, from depth, to depth, and various sulphide mineral estimates.
Pieces of drill core (14 cm to 20 cm long) were marked for bulk density determination about every 100 m down-the-hole by the logging geologist by labelling the wooden core box with “SG”. Those small pieces were not cut for assay sample. Periodically a contract employee weighed the core pieces in air and water so that a bulk density could be calculated.
Prior to sawing, the drill core was photographed. Two close-up photographs were taken for each core box and the two photos were “stitched” together to create a detailed photograph. After all logging procedures were complete the core boxes were moved to the core cutting facilities located adjacent to the core logging tents.
After integrating results from all available drilling, the following observations were made for the Kerr deposit:
● | The Kerr deposit is centered on a north-south trending, steep westerly dipping tabular intrusive complex, |
● | Drilling has demonstrated that the mineralized system has a strike length of 2,400 m and down-dip extents of 2,200 m, |
● | Deep mineralization is characterized by two north-south west dipping limbs that appear to coalesce near the surface. The west limb is about 500 m thick and the east limb is about 300 m thick, |
● | There are several intrusive phases present, with the earliest phase being a fine-grained diorite with 5% to 60% quartz-sulphide vein stockworks. This intrusive phase appears to contain the majority of economically interesting mineralization. Later, coarser grained intrusive phases envelop and sometimes invade the earlier phase. |
A summary of the interpretation of the Kerr drilling results are illustrated in Figures 7.3 to 7.4 and 14.4 to 14.7.
Based on a review of available drilling data, the following observations were made for the Sulphurets deposit:
● | The Sulphurets deposit has a lensoidal geometry, striking to the northeast and dipping to the northwest, |
● | Drilling has defined a mineralized system with a strike length of 2,200 m and down-dip extents of 550 m, |
Seabridge Gold Inc. | 10-11 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
● | Most of the gold and copper mineralization occurs in a structural block (“lower panel”) that is bounded by the upper Raewyn fault and the lower Mitchell thrust fault, |
● | Drilling has shown that most of the mineralization in the lower panel is associated with veins, breccias, shear fillings, and patchy replacements. |
A summary of the interpretation of the Sulphurets drilling results are illustrated in Figures 7.6 to 7.7 and 14.12 to 14.15.
Based on a review of available drilling data, the following observations were made for the Mitchell deposit:
● | The Mitchell deposit is genetically and spatially related to Early Jurassic intrusions, |
● | Drilling and outcrop mapping have defined a mineralized zone measuring approximately 1,600 m by 1,500 m by 850 m, |
● | The majority of mineralization is hosted by sheeted veins and intense stockworks within potassic and propylitically altered intrusives, |
● | The Mitchell deposit has many similarities with other gold-enriched calc-alkaline porphyry copper deposits (e.g. syn-mineral intrusions and various hydrothermal alteration assemblages like deep potassic, peripheral propylic, extensive shallow sericite alteration and abundant quartz veining). |
A summary of the interpretation of the Mitchell drilling results are illustrated in Figures 7.9 to 7.10 and 14.20 to 14.23.
Based on a review of available drilling data, the following observations were made for the Iron Cap deposit:
● | The Iron Cap deposit is hosted by Early Jurassic intrusions which are bounded by the upper Sulphurets thrust fault and lower Mitchell thrust fault, |
● | Drilling has defined a tabular body that strikes north-south and dips about 60 degrees to the west and measures about 1,500 m by 1,500 m by 850 m although the deposit remains open down-dip, |
● | Pre and syn-mineralized dioritic intrusions are characterized by tabular, steeply dipping hydrothermal breccias, |
● | Post mineral intrusions are limited to volumetrically insignificant thin dykes. |
A summary of the interpretation of the Iron Cap drilling results are illustrated in Figures 7.12 to 7.13 and 14.28 to 14.31.
Seabridge Gold Inc. | 10-12 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
10.4 | Qp Comments Regarding Drilling And Sampling Factors |
In general, core recovery for the various KSM drilling campaigns was excellent, averaging approximately 97%. RQD and core recovery were affected in some of the pre-2012 drilling in the upper portions of the Kerr deposit due to a rubble zone created by the dissolution of anhydrite veinlets in various lithologic units. Core recovery in the 2013 to 2016 drilling campaigns at Kerr was excellent at depth within the modeled anhydrite veinlet population where no dissolution has occurred.
No material drilling, sampling, or recovery issues were encountered within the mineralized portions of the other deposits within the KSM Property that were drill tested during the 2006 to 2019 campaigns. Difficulties were encountered while drilling through the Sulphurets fault zone (SFZ) at the Iron Cap deposit. Nearly all of the mineralization at Iron Cap is located beneath the SFZ. Once beneath the SFZ, core recovery improved dramatically.
In the opinion of the Qualified Person responsible for this section of this Report, there are no drilling or sampling factors that could materially impact the accuracy and reliability of the assay results associated with the 2006 to 2019 KSM drilling. Furthermore, the QP responsible for this section of this Report believes that the assays associated with the various KSM drilling campaigns are suitable to be used to estimate Mineral Resources.
Seabridge Gold Inc. | 10-13 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
11.0 | Sample Preparation, Analysis and Security |
11.1 | Introduction |
This section summarizes sample preparation, analyses, and security of KSM drill samples through the 2018 drilling campaign. Prior Technical Reports provided sampling details and quality control results from various annual drilling programs. In this Technical Report, a summary of sampling and assaying over the past 12 years is provided. In general, Seabridge has employed relatively consistent sampling methods over the years with minor modifications over the past five years regarding some assaying protocols. Initially, Seabridge used Eco Tech as their primary assay laboratory from 2006 to 2011 when Eco Tech was bought out by ALS Chemex, who has acted as Seabridge’s primary assay laboratory since that time to the present. Over the years, Seabridge’s quality control protocols have included the submission of certified standard reference materials (SRMs or “standards”) blanks, and duplicate field samples. Typically, 5 % to 10 % of the assay pulps from the primary laboratory were submitted to a secondary accredited assay laboratory for check assay comparison purposes. The following sections will summarize key aspects of sample preparation, analyses, etc. covering two time periods, pre-2012 and post-2012, primarily to account for the change of primary laboratory in 2011.
11.2 | KSM Sample Preparation Methods and Procedures |
11.2.1 | Statement on Sample Preparation Personnel |
Labourers contracted from Tahltan Native Development Corporation conducted all initial sample preparation (sawing and bagging) and were trained by, and under the direct supervision of, geologists employed by Seabridge. Drill core and quality control samples were shipped to the primary assay laboratory’s preparation facility (either to Eco Tech’s preparation facility located in Stewart, BC or ALS Canada’s preparation facility located in Terrace, BC). The prepared samples were then shipped to the primary assay laboratory’s analytical facility (i.e. either Eco Tech’s laboratory located in Kamloops, BC or ALS Canada’s laboratory located in North Vancouver, BC).
11.2.2 | Sample Preparation and Dispatch |
Drill core, placed in wooden core boxes by the drilling contractor, was loaded into metal baskets and delivered twice daily by helicopter from each drill rig, to Seabridge’s Sulphurets Creek camp facilities. After the core was delivered to the core logging tents, Seabridge geologists took an inventory of the core (a review of core condition, a check of run block depths, and a quick down-hole lithologic log was prepared). After the drill core had been completely logged, the sample starting/ending points were then laid out. A numbered sample tag was stapled to the wooden core box at the beginning of the sample run and the core was photographed. Core boxes were then moved to the core cutting facilities located adjacent to the core logging tents. Two Weatherhaven tents containing four saws with 14-inch diamond impregnated blades designed for rock cutting were utilized for sawing the core longitudinally. The saws were mounted on secure wooden stands at waist height. The saw blades were cooled, cleaned, and lubricated with fresh, non-recirculated water during cutting. The saw operator placed uncut core boxes on tables adjacent to the saws and cut each piece of core sequentially within each marked sample interval. The assay half of the sample was placed in a heavy-duty polythene bag along with the sample number tag. The outside of the polythene bags was marked with the sample number and then stapled shut. The remaining half of the drill core was carefully put back into the wooden core boxes as soon as cutting was complete.
Seabridge Gold Inc. | 11-1 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
The polythene sample bags were inventoried and then approximately three polythene sample bags containing HQ diameter core (or six bags with NQ core) were placed into large polyweave (rice) shipping bags. Approximately 30 rice bags were placed into wooden crates (“totes”) for shipment. The totes were flown by helicopter to a landing pad near km 54 on the Eskay Creek Mine Road located behind a locked gate. The totes were then placed into a locked steel sea-going container that can hold approximately eight totes. Once or twice a week, Granmac Services from Stewart, BC, picked up the totes and delivered them to an ALS receiving facility located in either Stewart, BC (pre-2013) or Terrace, BC where the samples were logged into ALS’s system. From the ALS preparation laboratory, the samples were delivered to the ALS assay laboratory located in North Vancouver, BC by either ALS personnel or other commercial carriers.
11.2.3 | Pre-2012 Analytical Procedures |
At the Eco Tech facilities in Stewart, samples were sorted and dried (if necessary), crushed through a jaw crusher and cone or roll crusher to –10 mesh, then split through a Jones riffle until a –250 g sub-sample was achieved. The sub-sample was pulverized in a ring and puck pulverizer so that 95% of the material passed a –140 mesh screen, then rolled to homogenize. The resulting pulp sample was placed in a numbered paper envelope and securely packed in cardboard boxes. These boxes were shipped via Greyhound freight services to the Eco Tech facilities located in Kamloops, BC.
At the Eco Tech’s laboratory in Kamloops, a 30 g sample size was split out from the pulp envelope and then fire assayed using appropriate fluxes. The resultant doré bead was parted and then digested with aqua regia followed by an atomic absorption (AA) finish using a Perkin Elmer AA instrument. The lower limit of detection for gold is 0.03 g/t or 0.001 oz/t. For other metals, a multi-element inductively coupled plasma (ICP) analysis was completed. For this procedure, a 0.5 g sample was digested with 3 mL mixture of hydrogen chloride, nitric acid, and water at a ratio of 3:1:2 that contained beryllium, which acts as an internal standard, for 90 minutes in a water bath at 95°C. The sample was then diluted with 10 mL of water and analyzed on a Jarrell Ash ICP unit. Eco Tech’s ICP detection limits (lower and upper) are summarized in Table 11.1.
Assay results were then collated by computer and were printed along with accompanying internal quality control data (repeats and standards). Results were printed on a laser printer and were faxed and/or mailed to appropriate Seabridge personnel. Appropriate standards and repeat samples were included on the data sheet.
Seabridge Gold Inc. | 11-2 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Table 11.1 ICP Detection Limits – Pre-2012 Data
Element | Lower | Upper | Element | Lower | Upper | |
Ag | 0.2 ppm | 100.0 ppm | Mo | 1 ppm | 10,000 ppm | |
Al | 0.01% | 10.00% | Na | 0.01% | 10.00% | |
As | 5 ppm | 10,000 ppm | Ni | 1 ppm | 10,000 ppm | |
Ba | 5 ppm | 10,000 ppm | P | 10 ppm | 10,000 ppm | |
Bi | 5 ppm | 10,000 ppm | Pb | 2 ppm | 10,000 ppm | |
Ca | 0.01% | 10.00% | Sb | 5 ppm | 10,000 ppm | |
Cd | 1 ppm | 10,000 ppm | Sn | 20 ppm | 10,000 ppm | |
Co | 1 ppm | 10,000 ppm | Sr | 1 ppm | 10,000 ppm | |
Cr | 1 ppm | 10,000 ppm | Ti | 0.01% | 10.00% | |
Cu | 1 ppm | 10,000 ppm | U | 10 ppm | 10,000 ppm | |
Fe | 0.01% | 10.00% | V | 1 ppm | 10,000 ppm | |
La | 10 ppm | 10,000 ppm | Y | 1 ppm | 10,000 ppm | |
Mg | 0.01% | 10.00% | Zn | 1 ppm | 10,000 ppm | |
Mn | 1 ppm | 10,000 ppm |
11.2.4 | Post-2012 Analytical Procedures |
ALS served as Seabridge’s primary assay laboratory. ALS is a leading provider of assaying and analytical testing services for mining and mineral exploration companies and has no association or affiliation with Seabridge. All of ALS’s locations are International Organization for Standardization (ISO) 9001:2000 certified.
AcmeLabs served as a check assay laboratory for Seabridge. AcmeLabs is a leading geochemical and assaying facility and has no association or affiliation with Seabridge. In October 2011, AcmeLabs’ Vancouver, BC facility received ISO/International Electrotechnical Commission (IEC) 17025:2005 accreditations from the Standards Council of Canada.
At the ALS preparation facility located in Terrace, BC, samples were sorted and dried (if necessary), crushed through a jaw crusher and cone or roll crusher to 70% –2 mm using ALS protocol CRU-31. The crushed sample was then split using ALS protocol SPL-21 using a riffle splitter. A portion of the crushed sample was replaced into the polythene bag (coarse reject) and stored temporarily at the ALS facility. A portion of the crushed sample was then pulverized using ALS protocol PUL-31 using a ring and puck pulverizer, until approximately a 250 g sub-sample (pulp) was achieved with 85% passing 75 µm or better. The resulting pulp sample was placed in a numbered paper envelope and securely packed in cardboard boxes. These boxes were shipped by ALS to their assay facility located in North Vancouver, BC.
Seabridge Gold Inc. | 11-3 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
At the ALS analytical laboratory located in North Vancouver, a 30 g sample was split out from the pulp envelope and then fire assayed using ALS protocol Au-AA23 using appropriate fluxes. The resultant doré bead was parted and then digested with aqua regia followed by an AA finish using an Agilent AA 240 Series instrument. The lower limit of detection for gold is 0.005 g/t.
For other metals, a multi-element ICP-atomic emission spectroscopy (AES) analysis was completed using ALS protocol ME-ICP41. For this procedure, an approximately 0.5 g sample was digested with aqua regia in a graphite heating block. After cooling, the resulting solution was diluted to 12.5 mL with de-ionized water, mixed and analyzed by ICP-AES using an Agilent ICP 720/730-ES Series instrument. The analytical results were corrected for inter-element spectral interferences. ALS’s ME-ICP41 lower and upper detection limits are summarized in Table 11.2 for the elements that Seabridge requested.
Table 11.2 ICP Detection Limits – Post 2012
Element | Units | Lower | Upper | Element | Units | Lower | Upper | |
Ag | ppm | 0.2 | 100 | Mo | ppm | 1 | 10,000 | |
Al | % | 0.01 | 25 | Na | % | 0.01 | 10 | |
As | ppm | 2 | 10,000 | Ni | ppm | 1 | 1,000 | |
B | ppm | 10 | 10,000 | P | ppm | 10 | 1,000 | |
Ba | ppm | 10 | 10,000 | Pb | ppm | 2 | 1,000 | |
Be | ppm | 0.5 | 1,000 | S | % | 0.01 | 10 | |
Bi | ppm | 2 | 10,000 | Sb | ppm | 2 | 1,000 | |
Ca | % | 0.01 | 25 | Sc | ppm | 1 | 1,000 | |
Cd | ppm | 0.5 | 1,000 | Se | ppm | 10 | 10,000 | |
Co | ppm | 1 | 10,000 | Sn | ppm | 10 | 10,000 | |
Cr | ppm | 1 | 10,000 | Sr | ppm | 1 | 1,000 | |
Cu | ppm | 1 | 10,000 | Th | ppm | 20 | 1,000 | |
Fe | % | 0.01 | 50 | Ti | % | 0.01 | 10 | |
Ga | ppm | 10 | 10,000 | U | ppm | 10 | 1,000 | |
K | % | 0.01 | 10 | V | ppm | 1 | 1,000 | |
La | ppm | 10 | 10,000 | W | ppm | 10 | 1,000 | |
Mg | % | 0.01 | 25 | Zn | ppm | 2 | 1,000 | |
Mn | ppm | 5 | 50,000 |
11.3 | Summary of the Nature, Extent, and Results of Quality Control Procedures |
Since 2006, Seabridge has routinely submitted certified standard reference materials (“standards”) and barren (“blanks”) with their sawn drill core samples at a frequency rate of approximately 1 standard and 1 blank for every 32 to 33 regular samples. At the conclusion of each drilling campaign, about 5% to 10% of the pulps from the primary laboratory were sent to a secondary accredited assay facility providing an independent check of the original pulps. Starting in 2007, field duplicate drill core (sawn ¼ core) samples were collected and sent to the primary assay laboratory at a frequency of about one duplicate sample for every 54 regular samples. Table 11.3 summarizes the number of control samples that were submitted by Seabridge on an annual basis.
Seabridge Gold Inc. | 11-4 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Table 11.3 Summary of KSM Control Samples Submitted Thru Time
In general, very few control samples assayed between 2007 and 2018 failed (i.e. were outside of +/- 3 standard deviation units of the expected value). Many of the failures were attributed to sample labeling errors (e.g. wrong standard listed in drill log). In the early years, some of the river gravel blanks had anomalous traces of copper and/or gold. The ¼ core duplicate sample results provide some insight into sample reproducibility. Table 11.4 summarizes basic statistics associated with original and ¼ duplicate samples collected at KSM between 2007 and 2018.
Table 11.4 ¼ Core Duplicate Sample Statistics (2007-2018)
Figure 11.1 show two box plots (gold on the left and copper on the right) that compare the original ¼ sample with the duplicate ¼ sample.
Seabridge Gold Inc. | 11-5 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 11.1 Duplicate Sample Box Plots
Source: (RMI, 2019)
Figures 11.2 and 11.3 show a number of graphical comparisons between the original and duplicate ¼ samples collected at KSM from 2007 to 2018 for gold and copper, respectively.
Seabridge Gold Inc. | 11-6 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 11.2 Gold Duplicate Sample Graphs
Source: (RMI, 2019)
Seabridge Gold Inc. | 11-7 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 11.3 Copper Duplicate Sample Graphs
Source: (RMI, 2019)
Seabridge Gold Inc. | 11-8 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
11.3.1 | Pre-2012 Quality Control Procedures |
Seabridge developed quality control procedures for their 2006 drilling campaign that remain similar to their current protocols. The quality control procedures included the insertion of certified standard reference materials (SRMs), blanks, and field duplicates into the regular drill core sample stream. During the first two drill campaigns (2006 to 2007), “barren” river gravels collected near Stewart, BC were used as blank material. In subsequent years, commercially available landscaping materials (crushed marble and granite) were used as blanks. Blanks were inserted into the sample stream at a rate of about one blank for every 33 regular samples. Rare anomalous blank assays for copper and/or gold were attributed to the uncontrolled nature of the blank material.
Pre-packaged certified standards, primarily from CDN Resource Laboratories Ltd. (CDN Resource), were submitted at a rate of about one standard per 33 regular core samples. These standards were selected based on the expected gold and copper grades and sample matrix makeup. In 2011, Seabridge had two custom standards prepared and certified by CDN Resource using material from the Mitchell deposit (SEA-KSM) and felsic gold bearing material from a Seabridge deposit located in the Northwest Territories (SEA-CL). Seabridge attempted to ensure that their quality control measures included the insertion of at least one sample blank and one standard within each Eco Tech laboratory batch of approximately 35 samples. The blank and pulp standards were numbered using the same number sequence that was used for the core samples and inserted into each batch shipment randomly by the geologist during the sample layout process.
Duplicate field samples consisted of ¼ core samples were collected at a frequency of about one duplicate sample for every 50 regular samples. The HQ and/or NQ core was initially sawn in half and then the original and duplicate sample were created by sawing a specific interval of the half core. The ¼ core pieces were then submitted as original and duplicate samples.
At the conclusion of the drilling/assaying season, Seabridge’s geologic staff selected about 5% to 10% of the primary laboratory assay pulps, which were then sent to an accredited secondary laboratory for “check assay” purposes.
Seabridge tried to ensure that they had at least two control samples per the primary laboratory’s fire assay batches, which typically was 33 samples (the laboratory reserved slots for their own control samples). If more than one control standard (SRM or blank) was outside of three standard deviation units of the expected value, the entire batch was deemed suspect and an order was given to the laboratory to re-assay that entire batch. If a single control sample failed and all of the regular samples were unmineralized then no action was taken. If a single standard failed and the batch contained some mineralized intervals, the control sample plus three to five samples above and below the control sample were re-analyzed. Very few batches were re-run during the period 2006 to 2011.
Seabridge Gold Inc. | 11-9 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
11.3.2 | Post-2012 Quality Control Procedures |
Seabridge’s post-2012 quality control procedures were essentially the same as those described for the pre-2012 data and have also been described in previous Technical Reports (Lechner, 2014; Tetra Tech, 2016). Standards, blanks, and field duplicates were submitted at similar frequencies as prior years. Control sample results were monitored by Seabridge personnel during each annual drilling campaign. In rare cases where more than one control sample failed, sample batches or three to five samples on either side of the failed control sample were re-run.
11.4 | QP’s Opinion |
In the opinion of the QP responsible for this section of the Technical Report, sample security, sample preparation, analytical procedures, and QA/QC protocols/results associated with Seabridge’s 2006 to 2018 KSM drilling campaigns were adequate and consistent with standard industry practices. The QP also believes that the assays are suitable to be used to estimate Mineral Resources.
Seabridge Gold Inc. | 11-10 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
12.0 | Data Verification |
The QPs have taken steps to verify the data are adequate for the purposes used in the Report.
In previous KSM NI 43-101 Technical Reports, the QP responsible for Mineral Resources described various data verification measures that were undertaken for the Kerr, Sulphurets, Mitchell, and Iron Cap mineralized zones. Section 4.2(7) of Companion Policy 43-101CP allows a new technical report to include any material information documented in a previously filed technical report, to the extent that this information is still current and relevant. The 2016 PFS is considered by Seabridge and the QPs to be current and relevant, and it has been summarized into this Report by the QPs with minor changes – there have been minor changes to the Measured and Indicated Mineral Resources used in the 2016 PFS, and the text content has been summarized. As part of the data verification process, the QPs reviewed information on the Property generated since the effective date of the 2016 PFS to confirm there has been no material change to the 2016 PFS and that the Mineral Reserves and economic outcomes from the study remain current. The checks taken and the results of this data verification are presented in Section 12.3.
12.1 | Drill Hole Data Verification |
12.1.1 | Assay Verification |
The QP responsible for Mineral Resources for this Report has personally compared assay certificates against the Seabridge drill hole assay database on an annual basis after the 2006 drilling campaign. The entire 2006 gold and copper assay data have been checked with no errors found. In early 2007, the QP responsible for Mineral Resources for this Report undertook an assay verification of some of the older drilling records from the 1991 and 2005 campaigns. The only errors from this check were that the electronic database did not contain some copper values despite certified copper assays recorded on the Eco Tech certificates (2005 drilling). The Placer Dome drill core was assayed at their internal laboratory located in Vancouver BC. The QP responsible for Mineral Resources for this Report randomly selected a number of Placer drill holes and compared the assays stored in Seabridge’s electronic database with the individual drill hole logs that contained the inhouse assay results. No errors were noted. Assay intersections from five Seabridge drill holes were compared with nearby older holes drilled by Placer Dome. Those comparisons showed that in general, the Placer Dome gold and copper data compared reasonably well with the newer Seabridge data with the newer data showing slightly higher grades than the older data.
Seabridge Gold Inc. KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study Update, NI 43-101 Technical Report |
12-1 | 219221-01-RPT-002 |
Prior to 2014, at least 10% of the assay records for each annual Seabridge drilling campaign were checked. These assay comparisons typically showed error rates of about 0.1%, which is well within industry accepted standards. Since 2014, the QP responsible for Mineral Resources for this Report has conducted a 100% comparison of certified assay records against Seabridge’s electronic drill hole database. These complete checks have not revealed many errors, most of which were associated with re-run samples (e.g. over limit gold assays that were re-run). All errors were brought to Seabridge’s attention and the electronic database corrected. Details regarding various drill assay database reviews were discussed in prior Technical Reports (Lechner 2007; Lechner 2008; Lechner 2009; and Lechner 2010, Tetra Tech 2012, Lechner 2014, and Tetra Tech 2016).
Initially, most of the minor assay database errors were associated with values that had not been updated in the database (e.g. over limit re-runs, etc.) Over the years, the number of errors discovered during the assay database checks have been reduced to essentially zero because of the robustness of the AcQuire database import scripts.
12.1.2 | Drill Hole Logs |
The QP responsible for Mineral Resources for this Report has completed numerous comparisons between drill hole core and both paper and electronic drill hole logs (lithology, alteration, mineralization, etc.) during site visits conducted in 2006 through 2019. Core recovery and RQD values were randomly checked by the QP during those site visits. It is the QP’s opinion that drill hole logging was completed in a professional manner and fairly represents the geology of the KSM deposits.
12.1.3 | Drill Hole Collar Locations |
Drill hole collar coordinates at the KSM Property are expressed in terms of NAD83 units. The inherited Kerr and Sulphurets drill hole data were originally located in a local mine grid that was tied to NAD27 datum. Seabridge personnel located nine of the older Placer Dome drill hole collars and surveyed them with their handheld Trimble DGPS instrument in NAD83 units. Both coordinate sets for those nine drill holes were provided to Aero Geometrics who was able to derive a transformation of the historical KSM drill holes to NAD83 datum. Seabridge’s practice has been to survey their diamond core holes using the handheld Trimble DGPS unit. McGladrey & Associates has been used by Seabridge to provide more accurate locations for drill hole collars. Comparisons between Seabridge and McGladrey & Associates hole locations showed in general that there were only sub-metre differences in location which is not considered to be material.
The terrain in the KSM area is quite steep requiring large wooden drill platforms to be constructed. The drill contractors measure drill depths starting from the platform elevation which can be several meters higher than the actual ground level where the hole actually penetrates the ground. The final drill hole collar locations are trigonometrically calculated using the drill hole inclination and amount of drill hole “stick-up” (distance between the ground and the bottom of the drill platform).
Seabridge Gold Inc. KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study Update, NI 43-101 Technical Report |
12-2 | 219221-01-RPT-002 |
Drill hole collar locations have been compared against surface topography and in general found to fit reasonably well. It is the opinion of the QP responsible for Mineral Resources that are the subject of this Report that the drill hole collar locations are reasonable for estimating Mineral Resources.
12.1.4 | Down-hole Surveys |
The QP responsible for Mineral Resources for this Report has completed numerous comparisons between the driller’s handwritten down-hole survey records and the Seabridge electronic database. Between the 2006 and 2018 drilling seasons very few discrepancies were discovered. Those discrepancies were researched by Seabridge’s geological staff and appropriate corrections completed. A minor number of down-hole survey records were discarded each year due to suspect azimuth or inclinations versus adjacent survey stations or surveys with high magnetic susceptibility. It is the opinion of the QP responsible for Mineral Resources for this Technical Report that the down-hole surveys are reasonable and suitable for estimating Mineral Resources.
12.1.5 | Quality Assurance/Quality Control |
The QP responsible for Mineral Resources for this Report has been provided with QA/QC data for KSM since the initial 2006 Seabridge drilling program. This data has been analyzed with the results and conclusions presented in prior Reports. It is the opinion of the QP responsible for Mineral Resources for this Report that Seabridge’s QA/QC procedures have been adequate in assuring that the drill hole data are suitable for estimating Mineral Resources.
12.1.6 | Topographic Data |
In 2008, McElhanney of Vancouver, BC was contracted to perform an aerial survey, and provide Seabridge with an updated accurate topographic base map of the three deposits and surrounding area. McElhanney obtained the data by conducting a helicopter-borne LiDAR survey.
The new topographic map of the district was provided to Seabridge in the UTM NAD83 coordinate system, which is the standard system for all Government of BC and industry mapping applications. Seabridge contracted Aero Geometrics of Vancouver to translate the KSM drill hole collar locations from NAD27 to NAD83 datum. Aero Geometrics used Sierra Systems Groups Inc. MAPS 3D software to perform the transformation of all collar coordinates. MAPS 3D uses the Canadian National Transformation Versions 1.1 and 2.0 for the transformation.
The QP responsible for Mineral Resources for this Report and Seabridge noted some discrepancies in the GPS surveyed collar locations and the new LiDAR topographic surface. These differences are believed to be based on:
● | the fact that no transform of the Z-coordinate was considered by the Canadian National Transformation software |
● | the inaccuracy of the initial GPS elevation |
● | the fact that many of the holes were surveyed immediately below the drill deck and not ground level or “stick-up” differences magnified by steep terrain. |
Seabridge Gold Inc. KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study Update, NI 43-101 Technical Report |
12-3 | 219221-01-RPT-002 |
Therefore, the GPS surveyed collar elevations were used.
12.1.7 | Bulk Density Data |
As a part of their drill core logging and sampling procedures at KSM, Seabridge has routinely collected bulk density data on drill core samples by weighing the air-dried core samples in air and water and then calculating the ratio. A total of 1,865,837,910 and 501 bulk density determinations for the basis for assigning bulk density values for the Kerr, Sulphurets, Mitchell, and Iron Cap deposits, respectively. The QP responsible for Mineral Resources for this Technical Report has reviewed Seabridge’s field procedures for obtaining bulk density determinations during various site visits and checked the mathematical formulas used to determine the bulk density values. The QP responsible for Mineral Resources for this Report believes that Seabridge’s bulk density collection procedure is reasonable and suitable for estimating Mineral Resources.
12.2 | Post Model Drilling Results |
The four KSM deposits have not all been updated at the same time because annual drilling campaigns typically focused on one or two of the recognized mineralized zones each season resulting in model updates for just those areas. The current models of record which are the basis of Mineral Resources discussed in this Report are as follows: Kerr – drilling through 2016; Sulphurets – drilling through 2018; Mitchell – drilling through 2011; and Iron Cap – drilling through 2018.
Since those models were finalized, Seabridge has completed limited drilling adjacent to or in some cases through Mineral Resource blocks. Only one hole has been drilled at Kerr (2018) since the model was finalized. That shallow hole was drilled in the southern portion of the deposit in an area where primarily Placer Dome drilling exists. In general, the 2018 drill hole confirmed the geometry and location of mineralization but the drill hole gold grade was about 4% lower than the predicted model grade (0.23 versus 0.24 g/t) and the drill hole copper grade was lower than the model predicted (0.39% versus 0.44%). This comparison of 32 composites against the model is not considered to be a material issue.
Twenty-six holes have been drilled in 2019 at the Sulphurets deposit since the resource was formalized with drilling through the 2018 campaign. Some of the assays for the 2019 holes are still pending at the time of this writing. The 2019 Sulphurets drilling has been completed in the upper plate above the Sulphurets Thrust Fault which consists primarily of various metasedimentary units belonging to the Hazelton Group. None of the 2019 drilling has intersected estimated model blocks in the Sulphurets model of record. Several holes came close to narrow zones of estimated block grades in the upper plate but since they did not intersect resource blocks no statistical comparisons can be made. The 2019 drilling suggests that several zones of lower grade mineralization could possibly be modeled in the upper plate but this additional potential mineralization is not considered to be material.
Seabridge Gold Inc. KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study Update, NI 43-101 Technical Report |
12-4 | 219221-01-RPT-002 |
Since the completion of the Mitchell model which was based on using data through 2011, a total of 23 core holes have been drilled within the deposit area. In 2012, 2015, and 2018 a total of two, three, and 18 holes have been drilled, respectively. The majority of the new drilling was conducted in the hanging wall of the deposit where no block grades had been estimated. Several of those holes intersected narrow zones of primarily low-grade mineralization. Only eight of the post-model holes intersected estimated model blocks from the model of record. A total of 145 drill hole composites from the newer drilling intersected model blocks with estimated grades. The drill hole gold grade was found to be 3% lower than the predicted model grade (0.59 g/t versus 0.61 g/t). The drill hole copper grade was 4% higher than the model predicted (0.19% versus 0.18%). The estimated block silver grade was 3% lower than the new drilling. Given that much of the new drilling has been conducted in areas of un-estimated block grades that may generate some potential low-grade mineralization and that there was a reasonable comparison of new drilling that intersected the model of record, it is the opinion of the QP responsible for Mineral Resources that are subject of this Report that the new drilling at the Mitchell deposit would not result in a material change to the Mitchell Mineral Resource.
12.3 | Verification that 2016 Prefeasibility Study Remains Current |
The 2016 PFS is considered by Seabridge and the QPs to be current and relevant based on the outcome of a data verification process. As part of the data verification process, the QPs reviewed information on the KSM Property generated since the effective date of the 2016 PFS to determine whether there would be a material change to the 2016 PFS, Mineral Reserves and economic outcomes from the study, if 2016 PFS was updated with the latest information. This check is considered necessary if the 2016 PFS is to be included unchanged in the 2020 Technical Report on the KSM Property.
12.3.1 | Verification Checks on the PFS Mine Quantities |
The verification process for the 2020 Technical Report included comparisons of mine quantity inputs to the 2016 PFS to the most recent information available to determine if there would be a material difference to the outcomes of the 2016 PFS if the information was updated. The inputs that were verified include the following:
● | updated Mineral Resource models (December 2019) compared for three of the four KSM deposits. The changes that occurred with the new models were primarily with the Inferred class material which was excluded from the 2016 PFS. |
● | process recoveries for some of the KSM deposits, and |
● | updates to assumptions for operating costs, cutoff grades, and drawpoint shut-off NSR values for underground caving mining. |
The Measured and Indicated material in the updated Mineral Resource models (December 2019) was analyzed using mining shapes and mine designs in the 2016 PFS, and the resulting tonnes, diluted grades, and metal content were compared to the 2016 PFS Mineral Reserves. The results are shown in Table 12.1.
Seabridge Gold Inc. KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study Update, NI 43-101 Technical Report |
12-5 | 219221-01-RPT-002 |
Table 12.1 Reserve Assessment Variance Check from 2016 PFS to 2020 Information
Area | Diluted Grades | Contained Metal | |||
Ore | Au | Cu | Au | Cu | |
(Mt) | (g/t) | (%) | (Moz) | (Mlb) | |
Mitchell 2019 vs. PFS | 0.0% | 0.6% | 1.0% | 0.6% | 0.9% |
Kerr 2019 vs. PFS | -3.2% | 1.3% | 2.2% | -1.9% | -1.0% |
Sulphurets 2019 vs. PFS | 14.3% | 1.5% | 1.0% | 16.0% | 15.5% |
Mitchell Underground | -1.5% | -0.2% | 3.3% | -1.7% | 1.7% |
Iron Cap Underground | 0.0% | -10.4% | 10.7% | -10.4% | 10.8% |
Total Proven & Probable | 1.3% | 0.0% | 2.4% | 1.3% | 3.6% |
Comments on the Reserve variance data checks follows:
● | the gold and copper content of the 2016 Mineral Reserves make up 96% of the revenue in the 2016 PFS, so they are the only relevant revenue metals to compare in the analysis |
● | Mitchell open pit makes up the majority of the mill feed for the first 35 years of the mine life, and the percentage differences in the grade and contained metal are less than 2%, which is well within measurement error, and would not materially affect the outcome of the 2016 PFS |
● | the differences in the Iron Cap underground Au and Cu grade and metal content offset each other to some extent |
● | the overall differences indicated in Table 12.1 are relatively small, are well within expected measuring errors, and would not be considered to have a material impact on the outcome of the 2016 PFS |
● | the comparisons are based on the most recent Mineral Resource models (December 2019) and are constrained within the 2016 PFS mining shapes. Although the mine designs are not updated to reflect potential optimizations, they are technically achievable, and any reserves generated from them and used in the resultant economic analysis will reflect an achievable economic result which in turn allows a corresponding Mineral Reserves to be relied upon |
● | because the changes to the 2016 PFS Mineral Reserves are not material, no change was made to the production schedule, process plant, and supporting infrastructure for the economic analysis verification checks. |
In conclusion, the Mineral Reserves in the 2016 PFS would not be expected to materially change if the Mineral Reserves were updated using the December 2019 Mineral Resource models. Therefore the 2016 Mineral Reserves are considered current and suitable to be used in the 2016 PFS that is included in the 2020 Technical Report on the KSM Property.
Seabridge Gold Inc. KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study Update, NI 43-101 Technical Report |
12-6 | 219221-01-RPT-002 |
12.3.2 | Verification Checks on Financial Analysis and Cost Estimates |
The verification process for the 2020 Technical Report included comparisons of costs and financial inputs to the 2016 PFS to the most recent information available to determine if there would be a material difference to the outcomes of the 2016 PFS if the information was updated. The inputs that were verified include the following:
● | capital costs |
● | operating costs |
● | metal pricing, and |
● | exchange rate and tax changes since 2016. |
The results of updating the financial model with the updated cost and financial inputs is shown in comparison to the 2016 PFS in Table 12.2.
Table 12.2 Summary of the 2016 PFS Verification Checks
Item | Unit |
2016 PFS
(Base Case) |
2020 Verification Check | Variance |
NPV5 | US$M | 3,263 | 3,596 | 333 |
IRR | % | 10.4 | 10.6 | 0.2 |
Payback | years | 6 | 5.8 | -0.2 |
Comments on the cost and financial input data verification checks follows:
● | checks to the capital cost estimates showed the initial and sustaining capital costs in the 2016 PFS, if re-estimated today, would likely increase by 3.8% and 3.2% respectively, on a pre-tax basis. This expected difference is well within the precision expected from a prefeasibility mine capital cost estimate and if updated, the capital cost figures would not represent a material change to the 2016 PFS. The 2016 PFS mine capital cost estimates are considered to be current and suitable to be used unchanged in the 2016 PFS that will be summarized in the 2020 Technical Report on the KSM Property |
● | the checks on operating cost estimates show the operating costs, if re-estimated today, would be within 2.12% of the 2016 PFS estimates. These changes are well within the precision expected from a prefeasibility operating cost estimate and if updated, would not represent a material change to the 2016 PFS. Therefore, the 2016 PFS operating cost estimates are considered to be current and suitable to continue to be used unchanged in the 2016 PFS that will be summarized in the 2020 Technical Report on the KSM property |
Seabridge Gold Inc. KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study Update, NI 43-101 Technical Report |
12-7 | 219221-01-RPT-002 |
● | checks on the commodity prices and exchange rate show that any updates to these parameters would not cause a material change to the economic analysis in the 2016 PFS. The commodity prices and exchange rate used in the 2016 PFS are considered to be current and suitable to continue to be used in the 2020 Technical Report on the KSM Property. |
● | the checks on changes to the tax rates show that any update to these parameters would not cause a material change to the economic analysis in the 2016 PFS. The net tax applied to the financial model in the 2016 PFS are considered to be current and suitable to continue to be used unchanged in the 2020 Technical Report on the KSM Property. |
In conclusion, the economic analysis of the 2016 PFS would not be expected to materially change if the capital and operating costs, commodity prices and exchange rate were updated. Therefore the 2016 capital and operating costs, commodity prices and exchange rates are considered current and suitable to be used unchanged in the 2016 PFS that is to be included in the 2020 Technical Report on the KSM Property.
12.4 | QP’s Opinion |
12.4.1 | Drill Hole Data Verification |
Based on the QPs’ review of the various vintages of data that were used to estimate Mineral Resources for the KSM deposits, the drill hole assay, survey, and geologic data were found to be professionally collected and are thought to be adequate for estimating Mineral Resources.
12.4.2 | 2016 Prefeasibility Study Data Verification |
Based on the QPs’ review of the new information generated on the KSM Property since the completion of the 2016 PFS, the new information does not materially change the outcome of the 2016 PFS and therefore the 2016 PFS is considered to be current and suitable to be included unchanged in this Report.
Seabridge Gold Inc. KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study Update, NI 43-101 Technical Report |
12-8 | 219221-01-RPT-002 |
13.0 | Mineral Processing and Metallurgical Testing |
13.1 | Introduction |
The Property includes four major mineralized zones, identified as the Mitchell, Kerr (upper Kerr and Deep Kerr), Sulphurets, and Iron Cap (upper Iron Cap and lower Iron Cap) deposits. Mineralization in all of the zones includes gold, copper, silver, and molybdenum.
Principal sulphides in all the KSM zones are pyrite and chalcopyrite. Lower portions of the Kerr and Iron Cap deposits contain minor secondary copper minerals.
Extensive metallurgical test programs have been carried out to determine the metallurgical characterization of the deposits (Table 13.1) culminating in the 2016 KSM PFS and 2016 PEA (Tetra Tech, 2016)
Most of the materials in the mineralization zones have generally higher than typical pyrite-to-chalcopyrite ratios. Pyrite is a significant gold carrier, and copper-to-gold ratios vary significantly by deposit.
Table 13.1 Typical Mineralogical Characteristics and Average Copper-to-Gold Grade Ratios in Potential Mill Feed
Deposit |
Average Pyrite/Chalcopyrite
Ratio1 |
Average
Copper Grade, % |
Average
Gold Grade, g/t |
Copper/Gold Grade Ratio |
Mitchell2 | 12 | 0.17 | 0.61 | 0.27 |
Sulphurets2 | n/a | 0.22 | 0.59 | 0.38 |
Iron Cap3 | 8 | 0.35 | 0.58 | 0.61 |
Kerr4 | 5 | 0.49 | 0.31 | 1.59 |
1. Approximate figures.
2.2016 PFS average mill feed grades.
3. Includes Lower Iron Cap.
4. Deep Kerr only.
In general, the average Bond ball mill work index of the tested KSM samples range from 13.9 to 15.7 kWh/t that are of moderate hardness to ball mill grinding, excluding the Sulphurets mineralization, which is much harder, with an average Bond ball mill work index of 18.5 kWh/t. Table 13.2 shows the average Bond ball mill work index and abrasion index for the four mineralization deposits.
Seabridge Gold Inc. | 13-1 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Table 13.2 Average Ball Mill Grindability and Abrasion Index
Deposit | Average BMWi, kWh/tonne | Average Bond Abrasion Index, g |
Mitchell | 14.4 | 0.29 |
Sulphurets | 18.5 | 0.23 |
Iron Cap | 15.7 | 0.10 |
Deep Kerr | 14.3 | 0.06 |
The mineral samples from the Mitchell Zone were tested in the earliest test programs starting in 2007 to develop the process flowsheet for the KSM process design, including flotation for copper, gold, silver and molybdenum recovery and cyanide leach on the gold-bearing pyrite tailings rejected from copper and gold bulk flotation for additional gold and silver recovery to produce doré. The flowsheet had been further optimized and then tested on the mineral samples from the other zones to investigate amenability of these samples to the flowsheet, in particular the copper and gold recovery by flotation. With the verification testing of the other mineral zone sample amenability to the flowsheet developed, the developed flowsheet formed the metal recovery basis of the KSM processing plant.
Since 2016 KSM PFS and PEA, additional metallurgical test programs have been conducted on the expanded underground components of the Kerr and Iron Cap deposits. The mineral samples tested showed similar metallurgical responses to the samples tested from the other deposits and mineralization zones. The metallurgical performance projections for the Deep Kerr and Iron Cap mineralization have been updated according to the updated test results produced.
Table 13.3 summarizes the flotation locked cycle test results from various samples and test programs.
Table 13.3 Locked Cycle Flotation Test Result Summary
Mitchell | Upper Kerr (Before 2012) | Iron Cap (Before 2015) | |||||||
Min | Max | Average | Min | Max | Average | Min | Max | Average | |
Head Grade | |||||||||
- Copper, % Cu | 0.12 | 0.24 | 0.20 | 0.59 | 0.69 | 0.62 | 0.14 | 0.38 | 0.25 |
- Gold, g/t Au | 0.55 | 0.92 | 0.73 | 0.22 | 0.25 | 0.24 | 0.24 | 1.28 | 0.57 |
Cu-Au Concentrate | |||||||||
- Grade, % Cu | 20.2 | 30.1 | 24.9 | 22.3 | 30.7 | 27.8 | 22.6 | 26.7 | 24.6 |
- Recovery, % Cu | 71.5 | 89.3 | 84.5 | 80.6 | 86.3 | 83.0 | 81.4 | 88.1 | 85.1 |
- Recovery, % Au | 43.2 | 73.5 | 60.8 | 37.7 | 49.7 | 41.8 | 45.0 | 71.4 | 60.4 |
table continues… |
Seabridge Gold Inc. | 13-2 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
The gold and silver extractions by cyanide leach from the gold-bearing pyrite tailings (first cleaner scavenger tailings and pyrite concentrate) rejected from copper and gold bulk flotation varied significantly. On average, the additional gold recovered into the doré is expected to be 11 % to 17%, while the additional silver recovery to the doré is estimated to be 13% to 16%. The test results suggest that the gold and silver recovery of the gold-bearing sulphide products from the Deep Kerr and lower Iron Cap deposits did not seem to respond well to the gold recovery by the established cyanide leaching treatment, compared to the samples from Mitchell and Sulphurets deposits. Further test work is required to optimize the flowsheet for additional gold and silver recovery.
13.2 | Summary of Metallurgical Test Programs |
Since 1989, extensive metallurgical test programs have been carried out to determine the metallurgical characterization of the deposits (Table 13.4). Test work from 1989 to 2016 inclusive of all the deposits established the baseline metallurgical recovery method presented in 2016 PFS. The most recent tests between 2016 and 2020 have been conducted to assess the established metallurgical recovery method with major samples from Deep Kerr and Iron Cap deposits, including additional cyanidation tests on Mitchell samples.
The following sections summarize the test work prior to 2016 with a more detailed review on the most recent test programs.
Table 13.4 Metallurgical Test Work Programs
Report Year | Program ID | Lab | Mineralogy |
Flotation/
Cyanide Leach |
Grindability | Others |
2020 | KM6004 | ALS | ✓ | ✓ | ✓ | ✓ |
2019 | KM5806 | ALS | ✓ | ✓ | ✓ | ✓ |
2018 | KM5501 | ALS | ✓ | |||
2018 | KM5501 | ALS | ✓ | ✓ | ✓ | ✓ |
2018 | KM5455 | ALS | ✓ | |||
2017 | KM5367 | ALS | ✓ | ✓ | ||
table continues… |
Seabridge Gold Inc. | 13-3 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
ALS – ALS Metallurgy Kamloops
BMML – Brenda Mines Ltd. Metallurgical Laboratory
CRI – Coastech Research Inc.
G&T – G&T Metallurgical Services Ltd. (now ALS Metallurgy Pty Ltd.)
Köeppern – Köeppern Machinery Australia Pty Ltd.’s HPGR Pilot Plant at UBC
Metso – Metso Minerals Industries Inc.
PDRC – Placer Dome Research Centre
Pocock – Pocock Industrial Inc.
SGS – SGS Mineral Services
SSW– Surface Science Western
Seabridge Gold Inc. | 13-4 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
13.3 | Summary of Initial Test Work 1989–1991 |
The metallurgical responses of Kerr mineral samples were assessed by initial metallurgical test programs by Coastech and Placer Dome between 1989 to 1991. The copper head grade varied from 0.40% to 1.30% Cu. The associated gold and silver concentrations were 0.26 g/t and 1.21 g/t Au and 0.9 g/t to 3 g/t Ag, respectively.
The historical test work involved mineralogy, grindability and metallurgical responses to flotation concentration process; the major conclusions are listed as follows:
● | preliminary mineralogy analysis was carried out and identified sericite in 3 of the 4 tested samples |
● | indicative work index was determined by using a comparative method, which indicates that the tested samples were soft to intermediate hardness materials |
● | preliminary open circuit flotation tests produced differing metallurgical upgrading responses to the test conditions. The optimum results were obtained by Placer Dome in 1991, which produced salable copper concentrates with a certain level of gold content. However, it was reported that significant gold had been lost to the flotation tailing. |
13.4 | Summary of Test Work 2007–2016 |
The 2007 to 2016 metallurgical tests were performed on mineralized samples from Mitchell, Sulphurets, upper and Deep Kerr, and Iron Cap deposits.
13.4.1 | Test Programs |
The following test programs were performed to establish a metallurgical flowsheet and to optimize process-related parameters:
● | mineralogy, flotation, cyanidation, and grindability test work by G&T Metallurgical Services Ltd. (G&T) and SGS Minerals Services (SGS) |
● | metallurgical variability responses and copper-molybdenum separation techniques were also investigated. Flotation locked cycle tests were performed on the composite samples from all the deposits, particularly on a variety of samples from the Mitchell deposit. Cyanidation tests were conducted to further recover gold and silver from the gold-bearing sulphide streams (scavenger cleaner tailing from the copper-gold bulk flotation and pyrite concentrate) |
● | semi-autogenous grinding (SAG) mill comminution (SMC) grindability tests to determine the grinding resistance of the mineralization to SAG/ball milling by Hazen Research Inc. (Hazen) and G&T |
● | crushing resistance parameters to high-pressure grinding rolls (HPGR) crushing of the Mitchell and Sulphurets ore samples by SGS, and pilot plant scale HPGR testing on the Mitchell ore sample by Köeppern Machinery Australia Pty Ltd.’s (Köeppern) HPGR pilot plant at UBC |
● | dewatering tests by Pocock Industrial Inc. (Pocock) on various product pulp samples. |
Seabridge Gold Inc. | 13-5 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
13.4.2 | Baseline Test Process Flowsheet and Conditions |
The test results indicate that the mineral samples from the 4 separate mineralized deposits are all amenable to the flotation-cyanidation combined process. The process flowsheet consists of the following stages:
● | copper-gold-molybdenum bulk rougher flotation followed by gold-bearing pyrite flotation |
● | regrinding the bulk rougher concentrate followed by 3 stages of cleaner flotation to produce a copper-gold-molybdenum bulk cleaner flotation concentrate |
● | molybdenum separation of the bulk cleaner flotation concentrates to produce a molybdenum concentrate and a copper/gold concentrate containing associated silver if molybdenum content in the bulk concentrate is economical for the separation |
● | cyanide leaching of the gold-bearing pyrite flotation concentrate and the scavenger cleaner tailing to further recover gold and silver values as doré bullion. |
The flotation reagents used in the testing were 3418A (dithiophosphinates), A208 (dithiophosphate), and fuel oil for copper-gold-molybdenum bulk flotation, and A208 and potassium amyl xanthate (PAX) for gold-bearing pyrite flotation. The primary grind size used was 80% passing approximately 125 µm to 150 µm, and concentrate regrind size was 80% passing approximately 20 µm.
13.4.3 | Mitchell Zone Major Metallurgical Test Results |
Mitchell Zone samples were tested by G&T, SGS, Meso, and Hazen from 2007 to 2012 in various metallurgical programs. All samples were originally collected/prepared from diamond drill core samples in respective drilling campaigns.
Mitchell Samples Characteristics
Mitchell samples were examined for chemical compositions, mineralogy, and crushability/grindability associated with using HPGR, SAG mill, ball mill, tower mill, and IsaMill technologies. Comminution circuit simulations were performed to develop a baseline crushing and grinding circuit to reduce the particle size of the Mitchell mineralized materials to the target grind size.
Chemical Composition and Mineralogy
The chemical compositions of the Mitchell Zone samples are summarized in Table 13.5. The copper grade is between 0.07% and 0.71% Cu, with an average level of 0.21% Cu; the gold content varies from 0.01 g/t to 1.49 g/t Au, with an average value of 0.79 g/t Au; the silver content varies from 1 g/t to 18 g/t Ag, with an average value of 4 g/t Ag; and the molybdenum content averages approximately 0.007% Mo.
Seabridge Gold Inc. | 13-6 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Table 13.5 Test Samples – Mitchell (2007–2012)
Year/Test Program |
Sample
|
Cu
(%) |
Au
(g/t) |
Ag
(g/t) |
Mo (%) |
||||||||
Min | Max | Avg. | Min | Max | Avg. | Min | Max | Avg. | Min | Max | Avg. | ||
2007/KM1909 | 3 | 0.19 | 0.22 | 0.20 | 0.86 | 0.90 | 0.87 | 3 | 4 | 4 | n/a | n/a | n/a |
2008/KM2153 | 34 | 0.07 | 0.52 | 0.23 | 0.22 | 1.49 | 0.79 | 1 | 18 | 4 | 0.001 | 0.025 | 0.005 |
2009/KM2344 | 10 | 0.10 | 0.27 | 0.22 | 0.60 | 1.08 | 0.93 | 3 | 8 | 4 | 0.001 | 0.006 | 0.007 |
2009/KM2535 | 11 | 0.10 | 0.71 | 0.24 | 0.35 | 1.02 | 0.69 | 2 | 9 | 4 | 0.002 | 0.015 | 0.008 |
2010/KM2670 | 3 | 0.12 | 0.20 | 0.16 | 0.01 | 0.79 | 0.65 | 2 | 3 | 3 | 0.006 | 0.013 | 0.010 |
2012/KM3174 | 25 | 0.12 | 0.30 | 0.20 | 0.56 | 1.10 | 0.76 | 2 | 5 | 3 | 0.002 | 0.015 | 0.005 |
Overall | 0.07 | 0.71 | 0.21 | 0.01 | 1.49 | 0.79 | 1 | 18 | 4 | 0.001 | 0.025 | 0.007 |
The dominate copper mineral identified in the Mitchell samples is chalcopyrite; the main sulphide mineral is pyrite, which was present as approximately 6% to 8% of the sample weight. The degree of chalcopyrite liberation ranged from 46% to 56% across the samples tested at a primary grind size of 80% passing 116 µm to 136 µm.
Crushability/Grindability – Bond Ball Mill Work Index
Standard Bond ball mill work index tests were determined in several programs on the Mitchell mineralization. The results indicate that the Bond work indices range from 12.5 kWh/t to 15.5 kWh/t, averaging 14.4 kWh/t. This suggests that the Mitchell samples are of moderate hardness. The Bond abrasion index (Ai) of Composite PP1 was measured at 0.293 g.
Crushability/Grindability – SAG Mill Comminution (SMC) Index
SMC grindability tests indicate that the Mitchell samples are moderately resistant to SAG mill grinding with A x b values from 30.0 to 59.6. Based on these results, JK SimMet simulations were conducted for a comminution circuit of 120,000 t/d, 92% availability, and a feed particle size of 80% passing 150 mm. Three scenarios were simulated with different BWi and product size levels as represented in Table 13.6.
● | simulation 1: Bond ball mill work index 14.8 kWh/t, a product particle size of 80% passing 150 μm |
● | simulation 2: Bond ball mill work index 16.0 kWh/t, a product particle size of 80% passing 150 μm |
● | simulation 3: Bond ball mill work index 15.0 kWh/t, a product particle size of 80% passing 120 μm. |
Seabridge Gold Inc. | 13-7 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Table 13.6 JK SimMet Simulation Results (60,000 t/d SABC Circuit, 2008)
Simulation | 1a | 1b | 2a | 2b | 3a | 3b | |
SAG Mill |
Size, D x L (EGL)
(ft x ft) |
40 x 24 | 37.7 x 21 | 40 x 24 | 37.7 x 21 | 40 x 24 | 37.7 x 21 |
Circulation Load
(% of Feed) |
19.5 | 18.4 | 19.5 | 18.4 | 19.5 | 18.4 | |
Gross Power Draw
(kW) |
18,843 | 15,570 | 18,843 | 15,570 | 18,843 | 15,570 | |
Transfer Particle Size, µm | 2,500 | 3,035 | 2,500 | 3,035 | 2,500 | 3,035 | |
Ball Mills |
Size, D x L (EGL)
(ft x ft) |
22 x 36 | 22 x 36 | 22 x 36 | 22 x 36 | 22 x 36 | 24 x 38 |
Mill Number | 2 | 2 | 2 | 2 | 2 | 2 | |
Gross Power Draw (kW) | 15,644 | 17,293 | 16,912 | 18,695 | 19,283 | 21,017 | |
Product Size P80, µm | 150 | 150 | 150 | 150 | 120 | 120 | |
Total Power Draw (kW) | 34,487 | 32,863 | 35,755 | 34,265 | 38,126 | 36,587 | |
Cyclone Diameter (inches) | 26 | 26 | 26 | 26 | 26 | 26 |
Crushability/Grindability – HPGR
Bench scale HPGR test work was conducted by SGS on both the Michell and Sulphurets samples, followed by a pilot plant scale test at Köeppern’s HPGR pilot plant at UBC. The test results from both programs indicate the following:
● | the bench scale LABWAL tests by SGS showed that both Mitchell and Sulphurets materials are amenable to HPGR crushing. On average, the net specific energy requirement is 2.33 kWh/t for the Mitchell sample and 3.08 kWh/t for the Sulphurets sample. The Sulphurets mineralization is more resistant to HPGR crushing than the Mitchell mineralization |
● | a lower net specific energy consumption (approximately 1.94 kWh/t) was recorded from the closed circuit pilot plant tests, in comparison with 1.99 kWh/t obtained from the single pass tests. A specific pressing force of 4 N/mm2 was considered to be optimum on the basis of both size reduction and throughput performance. An increase in feed moisture is expected to result in a reduction in throughput and an increase in energy consumption. |
Crushability/Grindability – Tower Mills/Isa Mills
Metso Minerals Industries Inc. (Metso) investigated the specific energy consumption for secondary grinding, using tower mills in the jar mill tests. The mill feed particle size was 80% passing 173 µm, and the product particle size was 125 µm. From the test results, Metso projected the specific energy requirement by a stirred tower mill would be approximately 0.88 kWh/t.
SGS used the IsaMill™ procedure to determine the specific energy requirement for regrinding the gold-bearing pyrite rougher concentrate produced from the Mitchell samples. The specific energy requirement to regrind the concentrate from 80% passing 66 µm to 80% passing 16 µm was determined to be about 24.2 kWh/t. The grinding media consumption was estimated to be 6 g/kWh.
Seabridge Gold Inc. | 13-8 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Mitchell Cu-Mo Bulk Concentrate Flotation Results
Open Cycle Tests
In the 2008 testing program, 32 drill core interval composite samples were used for variability tests, excluding two samples (Met 35 and Met 36) from the Sulphurets Zone. Primary grind sizes ranged from 80% passing 115 µm to 171 µm, averaging 149 µm. The rougher concentrates from the copper circuit were reground to approximately 80% passing 18 µm prior to cleaner flotation. The variation in the copper and gold flotation performance of various Mitchell mineral samples is shown in Figure 13.1. The results indicate some variability in copper and gold metallurgical responses, generally related to head grade changes.
Figure 13.1 Copper and Gold Open Cycle Flotation Variability Test Results (KM2153)
Source: KM 2153, G & T Metallurgical Services Ltd., Kamloops, BC, Canada, September 16, 2008
As shown in Figure 13.2, G&T established the relationship between copper recovery and copper feed grade at a fixed cleaner concentrates grade of 25% copper. This figure indicates that feed grade is the main factor causing copper performance variation.
Seabridge Gold Inc. | 13-9 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 13.2 Copper Open Cycle Flotation Performance vs Copper Head Grade at a Concentrate Grade of 25% Copper (KM2153)
Source: KM 2153, G & T Metallurgical Services Ltd., Kamloops, BC, Canada, September 16, 2008
Besides the gold reporting into the final copper concentrate, as shown in Figure 13.1, additional gold recoveries to the gold-bearing pyrite concentrate from the pyrite flotation circuit averaged approximately 16%. Combined gold recoveries from both the copper-gold flotation circuit and gold-bearing pyrite flotation circuit ranged from 73% to 96%, averaging approximately 86%.
Additional open batch cleaner flotation tests were conducted on nine composite samples representing the major Mitchell Zone mineralization types projected to be mined during various operating periods of an open pit mine plan. Some of the head samples contain higher than the average planned mill feed grades, especially for gold. The tests were conducted at primary grind sizes, averaging 80% passing 119 µm and regrind sizes of 80% passing 18 µm. The test results show that the average flotation metal recovery was 84.6% for copper and 61.2% for gold from these nine Mitchell metallurgical composites. The test results are shown in Figure 13.3.
Seabridge Gold Inc. | 13-10 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 13.3 Flotation Performance – Open Circuit Flotation Tests, Mitchell (KM2153)
Source: KM 2153, G & T Metallurgical Services Ltd., Kamloops, BC, Canada, September 16, 2008
The seven composites produced concentrates higher than 25% copper except for 16.2% concentrate copper grade from the low grade IARG 0-10 composite and 24.0% concentrate copper grade from the QSP LG 0-10 composite.
The relationship between the adjusted copper recovery and copper feed grade is plotted in Figure 13.4 with a copper recovery adjustment to reflect a concentrate grade of 25% copper. The graph for the batch flotation tests indicates a good correlation of copper recovery with copper head grade.
Figure 13.4 Copper Recovery vs. Copper Feed – Open Cleaner Circuit Tests (KM2153)
Source: KM 2153, G & T Metallurgical Services Ltd., Kamloops, BC, Canada, September 16, 2008
Seabridge Gold Inc. | 13-11 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Although some metallurgical performance variation was observed, the Mitchell mineral samples responded well to the conventional flotation.
Locked Cycle Tests
Fifteen locked cycle tests (LCTs) were conducted on the various Mitchell composite samples. The test results are summarized in Table 13.7 for the Mitchell mineralization and in Table 13.8 for Mitchell mineralization samples blended with the other mineralization. The LCTs showed that:
● | a substantial variation in the concentrate grade, from 20% to 30% copper, was noticed for individual Mitchell samples. On average, the final copper concentrate contained approximately 25% copper. The average recoveries to the concentrate were 84.7% for copper, 61% for gold, 50% for silver, and 56% for molybdenum |
● | approximately 26% of the gold and 28% of the silver in the feed reported to other gold-bearing products, which can be further extracted by cyanide leaching |
● | for the blended samples, the metallurgical performance appeared comparable to that produced when treating the Mitchell material on its own. |
G&T conducted pilot tests on Mitchell samples in 2009 that produced lower metal recoveries and concentrate grades compared with the LCTs results. According to G&T, this was caused by the issues with the pilot plant control or circuit stability. The pilot test results were considered as reference data only.
Seabridge Gold Inc. | 13-12 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Table 13.7 Locked Cycle Test Results – Mitchell
Test
Program* |
Comp |
Grind
Size
(P80 µm**) |
Feed Grade | Bulk Concentrate Grade | Flotation Recovery | |||||||||
Cu
(%) |
Au (g/t) |
Ag
(g/t) |
Mo
(%) |
Cu
(%) |
Au
(g/t) |
Ag
(g/t) |
Mo
(%) |
Cu
(%) |
Au
(%) |
Ag
(%) |
Mo
(%) |
|||
G&T 2153/141 | Master | 119/16 | 0.21 | 0.89 | 4.2 | - | 20.2 | 62.8 | 273 | - | 87.8 | 63.0 | 58.5 | - |
G&T 2153/142 | Master | 119/17 | 0.21 | 0.92 | 3.7 | - | 22.0 | 64.7 | 242 | - | 87.0 | 58.5 | 52.5 | - |
G&T 2344/73 | PP Comp 1 | 103/14 | 0.24 | 0.81 | - | - | 22.3 | 55.7 | - | - | 89.3 | 66.2 | - | - |
G&T 2535/18 | PP Comp 1 | 103/16 | 28.0 | 77.8 | 260 | - | 87.2 | 67.4 | 47.0 | - | ||||
G&T 2535/20 | PP Comp 1 | 137/17 | 0.24 | 0.82 | 3.9 | - | 23.8 | 62.0 | 248 | - | 88.1 | 66.2 | 55.6 | - |
G&T 2670/12 | PP Comp 3 | 147/15 | 0.20 | 0.74 | 3.2 | 0.006 | 30.1 | 77.7 | 264 | 0.39 | 84.2 | 58.0 | 52.6 | 35.7 |
G&T 2670/18 | PP Comp 3 | 147/22 | 0.20 | 0.79 | 3.2 | 0.006 | 27.4 | 70.5 | 272 | 0.46 | 86.1 | 56.5 | 53.0 | 49.7 |
G&T 2670/22 | PP Hi Mo | 143/21 | 0.16 | 0.60 | 3.3 | 0.014 | 22.4 | 61.7 | 243 | 1.20 | 78.9 | 56.9 | 43.8 | 47.9 |
G&T 2670/26 | BS Hi Mo | 143/17 | 0.12 | 0.55 | 2.4 | 0.010 | 24.9 | 70.3 | 185 | 1.26 | 71.5 | 43.2 | 26.0 | 42.2 |
G&T 2897/01 | Comp 46 of KM2344 | 120/16 | 0.15 | 0.65 | 2.3 | 0.012 | 22.6 | 80.5 | 226 | 1.76 | 89.1 | 73.5 | 58.6 | 86.3 |
G&T 3081/93 | Mitchell 3081-M2# | 137/18 | 0.20 | 0.65 | 4.7 | 0.004 | 27.1 | 58 | 427 | 0.33 | 83.3 | 56.3 | 57.1 | 55.6 |
G&T 3081/82 | Mitchell 3081-M3# | 123/22 | 0.21 | 0.57 | 3.5 | 0.004 | 23.8 | 44.2 | 223 | 0.24 | 88.2 | 59.9 | 49.5 | 49.2 |
G&T 3081/103 | Mitchell 3081-M3# | 123/17 | 0.22 | 0.55 | 4.0 | 0.006 | 29.8 | 56 | 299 | 0.27 | 76.7 | 57.8 | 43.0 | 26.3 |
ALS 4514/30*** | Mitchell 4515-M1# | 133/15/15 | 0.21 | 0.90 | 5 | 0.006 | 26.7 | 98.2 | 431 | 0.72 | 81.6 | 68.6 | 53.5 | 70.0 |
SGS | PP Comp 1 | 129/28 | 0.21 | 0.72 | - | 0.005 | 23.1 | 53.7 | - | 0.41 | 89.0 | 59.6 | - | 65.0 |
Notes: | *Au grade in the Bulk Cleaner Tailings ranged from 1.01 g/t to 2.12 g/t Au, averaging at 1.67 g/t Au; Au grade in the pyrite concentrate ranged from 0.58 g/t to 2.26 g/t Au, averaging at 1.48 g/t Au. |
**Primary grind size/regrind size
***Including a copper flotation on the pyrite flotation concentrate
#Composite samples IDs based on the previous mine plans (planned in 2010/2011) have been relabeled: Mitchell M1 for Mitchell Yr 0-5; |
Mitchell M2 for Mitchell Yr 0-10; Mitchell M3 for Mitchell Yr 0-20;
Seabridge Gold Inc. | 13-13 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Table 13.8 Locked Cycle Test Results – Blended Samples (Mitchell and Other Deposits)
Test
Program* |
Comp |
Grind
Size
(P80 µm**) |
Head Grade | Bulk Concentrate Grade | Flotation Recovery | |||||||||
Cu
(%) |
Au
(g/t) |
Ag
(g/t) |
Mo
(%) |
Cu
(%) |
Au
(g/t) |
Ag
(g/t) |
Mo
(%) |
Cu
(%) |
Au
(%) |
Ag
(%) |
Mo
(%) |
|||
G&T 2535/19 |
Mitchell (PP Comp1)/ Kerr (52/53 Blend); 80%:20% |
127/20 | 0.31 | 0.70 | 3.5 | - | 25.3 | 40.0 | 168 | - | 87.4 | 60.4 | 51.4 | - |
G&T2670/62 | Mitchell/Sulphurets Blend; 60%:40% | 141/22 | 0.22 | 0.67 | 2.8 | 0.007 | 24.2 | 52.0 | 178 | 0.664 | 85.9 | 59.8 | 50.9 | 72.4 |
G&T 2748/18 |
Mitchell (PP Comp 1)/
Iron
Cap C1/Iron Cap
|
135/15 | 0.24 | 0.79 | - | 0.004 | 27.6 | 59.6 | - | 0.250 | 87.8 | 58.2 | - | 51.5 |
ALS 4672/32*** |
Mitchell (Mitchell M1#)/ Iron Cap (IC-2014-MC4) |
117/17/17 | 0.24 | 0.67 | 4 | 0.005 | 25.0 | 54.3 | 304 | 0.430 | 82.7 | 65.7 | 58.4 | 70.3 |
ALS 4514/31*** | Mitchell (Mitchell M1#)/ Kerr(DK-2014-MC3) | 129/17/17 | 0.37 | 0.59 | 3 | 0.006 | 24.5 | 28.3 | 150 | 0.328 | 87.9 | 62.8 | 57.2 | 75.1 |
Notes: | *Au grade in the bulk cleaner tailing ranged from 1.07 g/t to 1.89 g/t Au, averaging at 1.45 g/t Au; Au grade in the pyrite concentrate ranged from to 0.41 g/t to 1.85 g/t Au, averaging at 1.15 g/t Au. |
**Primary grind size/regrind size
***Including a copper flotation on the pyrite flotation concentrate
#Sample ID relabeled, see note in Table 13.7
Seabridge Gold Inc. | 13-14 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Mitchell Copper-Gold and molybdenum Separation Flotation Tests
Copper-gold and molybdenum separation flotation tests were performed to further recover molybdenum concentrate from copper-gold-molybdenum bulk concentrates in the 2009/2010 testing program. The results indicate that:
● | the best results were obtained from the bulk Cu-Mo concentrates produced in the 2010 pilot plant tests in an open circuit flotation test. It produced a 51% molybdenum concentrate with a molybdenum recovery of 72% |
● | the molybdenum-copper separation LCT recovered 88.5% of the molybdenum from the molybdenum-copper concentrate and produced a 41% Mo concentrate. The test results are provided in Table 13.9. |
Table 13.9 Cu-Mo Separation LCT Results, 2010
Product |
Weight
(%) |
Grade (%) | Recovery (%) | |||
Cu | Mo | C | Cu | Mo | ||
Bulk Concentrate | 100.0 | 19.3 | 1.28 | 0.63 | 100.0 | 100.0 |
Mo Concentrate | 2.8 | 2.66 | 41.2 | 5.76 | 0.4 | 88.5 |
Cu Concentrate | 97.2 | 19.8 | 0.15 | 0.48 | 99.6 | 11.5 |
Furthermore, G&T conducted preliminary leaching tests on the molybdenum concentrates to reduce the contained copper and lead concentrations. The tests used both the Brenda-leach procedure and hydrochloric acid leaching methods. The Brenda-leach method can lower the copper and lead contents from 2.06% to 0.26% for copper and from 0.14% to 0.03% for lead. The hydrochloric acid leaching method is less efficient which reduced the copper content from 1.50% to 0.81%.
The assay on the final molybdenum concentrates indicated that the concentrates contained approximately 2,200 g/t rhenium (Re).
Mitchell Cyanide Leach Tests
Cyanide leach tests on the gold-bearing products (first cleaner scavenger tailing and pyrite concentrate) generated from the flotation tests on Mitchell samples were mainly conducted during 2007 and 2016. Additional tests have been conducted after 2017, on the samples generated during the 2010 pilot plant campaigns, to evaluate cyanidation and other potential treatments.
Mitchell Cyanide Leach Tests 2007–2016
Cyanide leach tests were conducted on products from the open circuit flotation tests, locked cycle flotation tests, and pilot plant tests. The tests mainly used Carbon-In-Leach (CIL) procedure while some of the tests used Direct Cyanidation (DCN) procedure. CIL procedure was used for the cyanidation tests on the pilot flotation samples. The combined first cleaner tailing and the gold-pyrite concentrate were reground and subjected to cyanide leaching for additional gold and silver recovery.
Seabridge Gold Inc. | 13-15 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
For leaching on the open circuit flotation products, the average gold extraction rate in the 24-hour leach tests in 2008 ranged from 63% to 91%, with an approximate average of 79%. For leaching of the LCT products, the average extraction rate is 66% for gold and 56% for silver (Table 13.10). The lower gold leach extraction rate appears to be related to some difficult leach gold-bearing middling materials rejected into the first cleaner tailings and also a lower gold head grade.
Cyanide leaching tests on the pilot plant products exhibited notable variabilities between G&T and SGS. The gold extraction by G&T was from 70% to 78%, while SGS obtained a lower gold extraction of 50% to 59%. The lower gold extraction rate by SGS is possibly due to the leach testing being focused to generate leach solutions for cyanide destruction testing program.
Some of the leaching tests were conducted separately on the reground first cleaner tailing and reground pyrite concentrate. The results indicate that the first cleaner tailing produced lower gold extraction than the pyrite concentrate.
Table 13.10 Cyanidation Test Results on LCT Products – Mitchell
Testing
Program |
Sample |
Regrind
Size (P80 µm) |
Feed
(Au, g/t) |
Extraction
(Au, %) |
Feed
(Ag, g/t) |
Extraction
(Ag, %) |
G&T-2153 | Master | 15 | 1.8 | 67.6 | 9.1 | 62.1 |
G&T-2153 | Master | 15 | 2.2 | 73.2 | 10.1 | 64.4 |
G&T-2344 | PP Comp 1 | 12 | 1.6 | 68.0 | ||
G&T-2535 | PP Comp 1 | 15 | 1.7 | 69.0 | 12.6 | 54.4 |
G&T-2535 | PP Comp 1 | 15 | 1.6 | 81.1 | 10.9 | 54.7 |
G&T-2670 | PP Comp 3 | 21 | 1.6 | 61.6 | ||
G&T-2670 | PP Comp 3 | 18 | 2.0 | 66.5 | 8.1 | 55.5 |
G&T-2670 | PP Hi Mo | 19 | 1.9 | 68.0 | 8.6 | 50.6 |
G&T-2670 | BS Hi Mo | 19 | 1.7 | 68.9 | 7.6 | 48.7 |
G&T-2897 | Comp 46 | 1.1 | 63.5 | |||
G&T-3081 | Mitchell M2* | 24 | 1.5 | 51.2 | ||
G&T-3081 | Mitchell M3* | 21 | 1.2 | 50.4 | ||
SGS | PP Comp 1 | 16 | 1.1 | 69.8 | ||
Average – Mitchell | 18 | 1.6 | 66.1 | 9.6 | 55.8 |
*Sample ID relabeled, see note in Table 13.7
Mitchell Cyanide Leach Tests 2017–2020
Additional cyanidation test work has been conducted by ALS Metallurgy in 2017 (KM5367) and 2018 (KM5455) on Mitchell samples. Test KM5367 was to investigate gold, silver, and copper extractions with lower sodium cyanide concentration at varied leach time. The leach feed samples were treated in a single-stage copper flotation prior to leaching.
Seabridge Gold Inc. | 13-16 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
2017 Samples
The bulk cleaner tailing and pyrite rougher concentrate samples produced in the previous pilot plant testing of the program KM2344 and KM2670 were prepared for the leaching test. PP samples were the composited samples from Test 2670, while P7 samples were from Test 2344. Details for sample composition can be found in the Appendix I of the original test report (KM5367). Table 13.11 shows the chemical compositions of these samples.
Table 13.11 Metal Contents of Leach Test Head Samples – Mitchell, 2017 (ALS KM5367)
Leach Feed Samples | Metal Content | ||||
Cu
(%) |
S
(%) |
Au
(g/t) |
Ag
(g/t) |
Fe
(%) |
|
PP Bulk Cleaner Tailing (KM2670) | 0.14 | 25.4 | 1.45 | 5.0 | n/a |
P7 Bulk Cleaner Tailing (KM2344) | 0.16 | 39.2 | 2.09 | 7.8 | 33.5 |
PP Pyrite Rougher Concentrate (KM2670) | 0.14 | 27.7 | 2.44 | 6.1 | n/a |
P7 Pyrite Rougher Concentrate (KM2344) | 0.25 | 10.5 | 1.35 | 5.0 | 9.7 |
2018 Samples
The samples used in the 2018 cyanidation tests were the composited samples of the P7 cleaner tailing from KM2344 and PP bulk cleaner tailing from KM2670. The composite samples were ground to 80% passing 14 µm. The head assay results of the composite sample are presented in Table 13.12.
Table 13.12 Metal Contents of Leach Test Head Samples – Mitchell, 2018 (ALS KM5367)
Leach Feed Samples | Metal Content | |||
Cu
(%) |
S
(%) |
Au
(g/t) |
Ag
(g/t) |
|
Reground Mitchell Bulk Cleaner Tailing | 0.14 | 32.0 | 1.75 | 8.0 |
Cyanidation Optimization Test (KM5367)
DCN and CIL tests were conducted on bulk cleaner tailing and pyrite concentrate samples from previous tests. Sodium concentration level, leaching time, and the effects of residual copper minerals were investigated to assess the extraction of gold, silver, and copper.
The cyanidation test results are presented in Table 13.13. The following major observations are made from the leaching test results:
● | reducing the initial cyanide concentration from 1,000 ppm to 500 ppm generally led to lower extractions of gold, silver, and copper, especially for pyrite concentrate samples |
● | longer leaching time was beneficial for silver extraction. Compared with direct leaching process, silver extraction rates were improved significantly by using CIL test procedure |
● | similar to the 2007–2016 test results, lime consumption for bulk cleaner tailing was significantly higher than pyrite rougher concentrate samples. |
Seabridge Gold Inc. | 13-17 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Table 13.13 Optimization Cyanidation Test Results – Mitchell 2017 (ALS)
Test | Head Samples | Test Type |
Leach
Time (h) |
Initial NaCN Concentration
(ppm) |
Cyanide
Consumption (g/t) |
Lime
Consumption (g/t) |
Feed Grade, Calculated | Extraction | ||||
Au
(g/t) |
Ag
(g/t) |
Cu
(%) |
Au (%) |
Ag
(%) |
Cu
(%) |
|||||||
KM5367-1 | PP Bulk Cleaner Tailing | DCN | 8 | 1,000 | 2,000 | 3,100 | 1.40 | 7.7 | 0.11 | 49.4 | 55.9 | 45.2 |
KM5367-5 | 500 | 1,400 | 2,000 | 1.60 | 6.34 | 0.12 | 55.6 | 38.5 | 36.4 | |||
KM5367-2 | PP Pyrite Ro. Concentrate | DCN | 8 | 1,000 | 1,500 | 2,900 | 2.34 | 6.99 | 0.13 | 77.0 | 58.5 | 28.7 |
KM5367-6 | 500 | 1,100 | 1,800 | 2.65 | 6.03 | 0.14 | 66.4 | 48.6 | 22.4 | |||
KM5367-3 | P7 Cleaner Tailing | DCN | 8 | 1,000 | 2,200 | 10,900 | 2.22 | 8.62 | 0.14 | 52.6 | 49.0 | 41.1 |
KM5367-7 | 500 | 2,000 | 6,600 | 2.29 | 7.63 | 0.15 | 51.6 | 34.5 | 41.6 | |||
KM5367-4 | P7 Pyrite Concentrate | DCN | 8 | 1,000 | 1,800 | 4,200 | 1.43 | 6.27 | 0.25 | 79.8 | 31.5 | 20.1 |
KM5367-8 | 500 | 1,400 | 1,800 | 1.71 | 5.16 | 0.27 | 57.8 | 12.8 | 16.4 | |||
KM5367-9 | P7 Cleaner Tailing | CIL | 10 | 1,000 | 3,000 | 6,100 | 2.26 | 8.81 | 0.15 | 52.6 | 68.2 | 48.4 |
KM5367-10 | 500 | 2,300 | 6,100 | 2.23 | 8.59 | 0.15 | 51.2 | 65.1 | 43.9 | |||
KM5367-11 | P7 Pyrite Concentrate | CIL | 10 | 1,000 | 2,200 | 1,500 | 1.42 | 5.75 | 0.26 | 73.3 | 66.9 | 17.9 |
KM5367-12 | 500 | 1,600 | 1,500 | 1.53 | 5.34 | 0.26 | 62.7 | 51.3 | 15.1 | |||
KM5367-15 | Combined PP Bulk Cleaner Tails/P7 Cleaner Tailing | CIL | 10 | 1,000 | 2,400 | 3,500 | 1.82 | 7.42 | 0.13 | 47.1 | 58.2 | 41.4 |
KM5367-16 | 500 | 2,100 | 3,500 | 1.84 | 7.14 | 0.14 | 45.9 | 55.2 | 38.7 | |||
KM5367-17 | Combined PP Pyrite Ro. Concentrate/P7 Pyrite Concentrate | CIL | 10 | 1,000 | 2,100 | 1,500 | 1.89 | 6.59 | 0.20 | 68.8 | 60.5 | 19.3 |
KM5367-18 | Combined PP Pyrite Ro. Concentrate/P7 Pyrite Concentrate | CIL | 10 | 500 | 1,500 | 1,500 | 1.95 | 5.81 | 0.20 | 62.0 | 55.2 | 16.8 |
KM5367-19 |
Test 13 1st Cleaner Tailing/
Test 14 1st Cleaner Tailing*
|
CIL | 10 | 1,000 | 1,000 | 5,000 | 0.98 | 3.60 | 0.04 | 47.6 | 61.1 | 25.9 |
KM5367-20 |
Test 13 1st Cleaner Tailing/
Test 14 1st Cleaner Tailing*
|
CIL | 10 | 500 | 500 | 4,400 | 1.32 | 3.38 | 0.05 | 48.5 | 43.8 | 18.3 |
Note: *Test 13 and Test 14 cleaner tails were produced from the copper flotation of the combined PP bulk rougher concentrate/P7 pyrite concentrate.
Seabridge Gold Inc. | 13-18 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Cyanidation Optimization Test (KM5455)
In this testing program, the leach feed was also subjected to one single-stage copper flotation prior to cyanidation. The test results are shown in Figure 13.5. The following major observations were made:
● | similar to the 2017 test results, the copper flotation prior to leaching process was beneficial for reducing cyanide consumption |
● | finer grind size feed to the cyanide leaching can improve the extractions of gold, silver, and copper. The increased extractions were 68.1% Au, 73.4% Ag, and 66.2% Cu (KM5455-03) as compared with the previous results of 47.1% Au, 58.2% Ag, and 41.4% Cu (KM5367-15). However, this increase may also result from the longer leaching retention time |
● | an increase in pre-aeration from 2 hours to 16 hours had only a marginal increase of gold extraction by 1%. |
Figure 13.5 Leaching Test Results – Mitchell 2017 and 2018 (ALS KM5455)
Source: | ALS Metallurgy (2018). Metallurgical Testing of a Mitchell Bulk Cleaner Scavenger Tailings Sample (KM 5455). June 19, 2018. |
13.4.4 | Sulphurets Zone Major Metallurgical Test Results |
G&T tested the Sulphurets Zone samples in 2008 and 2011/2012. The 3 composite samples from crushed drill cores were tested to investigate the metallurgical responses of Sulphurets mineralization.
Sulphurets Samples Characteristics
Chemical Composition and Mineralogy
The chemical compositions of the Sulphurets Zone samples are summarized in Table 13.14. The copper grade is between 0.14% and 0.46% Cu with an average of 0.28% Cu. The gold content varies from 0.26 g/t to 0.81 g/t Au, averaging 0.61 g/t Au. The concentrations of silver are relatively constant with an average of 1 g/t Ag. The molybdenum content averages approximately 0.006% Mo.
Seabridge Gold Inc. | 13-19 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Table 13.14 Test Samples – Sulphurets (2009-2012)
Year/Test Program |
Sample Quantity |
Cu
(%) |
Au
(g/t) |
Ag
(g/t) |
Mo
(%) |
||||||||
Min | Max | Avg | Min | Max | Avg | Min | Max | Avg | Min | Max | Avg | ||
2009 (G&T) | 3 | 0.14 | 0.37 | 0.25 | 0.26 | 0.81 | 0.53 | 1 | 2 | 1 | 0.003 | 0.011 | 0.007 |
2011/2012(G&T) | 2 | 0.17 | 0.46 | 0.32 | 0.65 | 0.76 | 0.70 | 1 | 2 | 1 | 0.004 | 0.008 | 0.006 |
Overall | 0.14 | 0.46 | 0.28 | 0.26 | 0.81 | 0.61 | 1 | 2 | 1 | 0.003 | 0.011 | 0.006 |
Crushability/Grindability – Bond Ball Mill Work Index
The Bond ball work test results indicate that the Sulphurets samples are more resistant to ball mill grinding compared to the Mitchell samples. The average Bond ball work index is 18.5 kWh/t; the Bond Ai of the overall Sulphurets composite is 0.233 g.
Crushability/Grindability – SMC Index
The SMC grindability tests indicate that the Sulphurets samples are more resistant to SAG mill grinding than the Mitchell samples. The A x b values of the tested Sulphurets and Mitchell samples were 41.7 and 38.7, respectively.
Crushability/Grindability – HPGR
SGS conducted bench scale HPGR tests on the Sulphurets composite samples. The tests included batch open circuit tests and LCTs. The test results indicate that the Sulphurets mineralization is more resistant to HPGR crushing than the Mitchell mineralization. On average, the net specific energy requirement determined by bench tests is 3.08 kWh/t for the Sulphurets sample, compared to 2.33 kWh/t for the Mitchell sample.
The preliminary HPGR/ball mill circuit simulation results by SGS suggested that the unit power requirement for the HPGR/ball mill circuit would be approximately 14.8 kWh/t for the Sulphurets mineralization, compared to 10.4 kWh/t for the Mitchell mineralization.
Sulphurets Cu-Mo Bulk Concentrate Flotation Results
Open cycle cleaner flotation and locked cycle flotation tests were conducted on Sulphurets samples to test metallurgical responses of the samples to the process flowsheet developed for the Mitchell mineralization. The open cycle flotation tests by both G&T and SGS indicate that the Sulphurets samples show good metallurgical performance and may produce higher grade copper concentrates than the Mitchell samples.
Several LCTs have been conducted on the various Sulphurets composite samples. The test results are summarized in Table 13.15:
● | SGS test recovered 85.7% copper to the bulk concentrate graded at 22.7% Cu, while lower copper recovery but higher copper grade bulk concentrates were produced from the G&T testing program. The testing on Composite 9 produced a much lower copper recovery compared to the other tests, which could be the result of the low head grade |
● | the average gold recovery for both tests was approximately 56%, excluding the lower gold recovery of Composite 9. Silver recovery in the G&T tests averaged 30%. Molybdenum to the bulk concentrate averaged 69%. |
The locked cycle flotation test results for the metallurgical performances of the Mitchell-Sulphurets blend sample (60% Mitchell and 40% Sulphurets) are presented in Table 13.8 of the Mitchell mineralization section. Similar performance was observed between the blended samples and Mitchell samples.
Seabridge Gold Inc. | 13-20 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Table 13.15 LCT Results – Sulphurets
Test Program* | Composite |
Grind Size (P80 µm**) |
Head Grade | Bulk Conc. Grade | Flotation Recovery (%) | |||||||||
Cu
(%) |
Au
(g/t) |
Ag
(g/t) |
Mo
(%) |
Cu
(%) |
Au
(g/t) |
Ag
(g/t) |
Mo
(%) |
Cu | Au | Ag | Mo | |||
SGS | Composite | 125/20 | 0.20 | 0.66 | - | 0.007 | 22.7 | 49.1 | - | 0.630 | 85.7 | 56.1 | - | 66.6 |
G&T 2670/44 |
Master Composite
(Comp49/50/51) |
154/16 | 0.24 | 0.52 | 1.6 | 0.006 | 28.3 | 41.8 | 82.0 | 0.701 | 80.5 | 53.9 | 34.3 | 72.2 |
G&T 2897/22 |
Master Composite
(Comp49/50/51) |
113/- | 0.24 | 0.50 | 1.5 | 0.008 | 28.4 | 41.6 | 71.4 | 0.850 | 79.4 | 55.6 | 31.5 | 68.5 |
G&T 3174/8 | Composite 8 | 121/19 | 0.46 | 0.70 | 1 | 0.008 | 29.3 | 31.4 | 34 | 0.227 | 83.6 | 58.6 | 31.1 | 37.7 |
G&T 3174/9 | Composite 9 | 127/21 | 0.16 | 0.59 | 2 | 0.004 | 26.0 | 63.7 | 130 | 0.170 | 60.6 | 40.1 | 21.3 | 14.1 |
Notes: | * Au grade in the Bulk Cleaner Tailings ranged from 1.82 g/t to 3.55 g/t Au, averaging at 2.38 g/t Au; Au grade in the pyrite concentrate ranged from 0.67 g/t to 1.41 g/t Au, averaging at 1.16 g/t Au. |
** Primary grind size/regrind size
Seabridge Gold Inc. | 13-21 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Sulphurets Cyanidation Leach Results
The first cleaner tailing and the gold-pyrite concentrate from the varied flotation circuit were subjected to cyanide leaching for additional gold and silver recovery. Both G&T and SGS conducted cyanidation tests on the products from the locked cycle flotation tests.
The test results are provided in Table 13.16. In general, the Sulphurets samples produced lower gold and silver extractions, in comparison with the Mitchell samples. The best gold extraction obtained was 70.5% by SGS using the CIL leach procedure. The direct cyanide leach test produced inferior results.
Table 13.16 Cyanidation Test Results – Flotation LCT Products, Sulphurets, 2009–2011
13.4.5 | Upper Kerr Zone Metallurgical Test Results |
There are two mineralization zones in the Kerr deposit. The Deep Kerr Zone mineralization may be mined by underground block caving, while the upper Kerr Zone material will likely be mined by open pit mining.
Early test work from 2010 to 2012 completed by G&T were focused on the samples from the surface Kerr Zone. Between 2013 and 2017, 5 test programs—KM3735, KM4514, KM4029, KM5063, and part of KM5266—were completed to investigate the metallurgical performance of the mineralization from the Deep Kerr Zone.
Upper Kerr Samples Characteristics
Four composite samples from the upper Kerr were prepared for metallurgical testing from the drill core intervals. It appears that the upper zone materials may have experienced some oxidation and contained more clay minerals.
Chemical Composition
The assay data of the composites are presented in Table 13.17. The mineralization of each sample can be found in the 2016 PFS report.
Seabridge Gold Inc. | 13-22 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Table 13.17 Metal Contents of Composites – Upper Kerr, 2010 (G&T)
Composite | Mineralization Type | Metal Content | |||
Cu
(%) |
Au
(g/t) |
Mo
(%) |
Ag
(g/t) |
||
Comp 52 – 2010 | Rubble Zone | 0.59 | 0.22 | 0.004 | 2.0 |
Comp 53 – 2010 | Quartz Stockwork | 0.61 | 0.17 | 0.001 | 1.5 |
Composite 10 – 2011/2012 | CL Quartz Crackle | 0.59 | 0.26 | 0.001 | 1.0 |
Composite 11 – 2011/2012 | QSP Quartz Crackle | 0.68 | 0.29 | 0.001 | 2.0 |
Crushability/Grindability – Ball Mill
The samples from the upper Kerr Zone are more amenable to ball mill grinding when compared to the Mitchell and Sulphurets mineralization. The average Bond ball mill work index is 13.9 kWh/t.
Crushability/Grindability – SAG Mill
The 2011/2012 testing program determined the grindability of the upper Kerr samples to SAG mill milling. The test results revealed that the grindability of the upper Kerr samples to SAG mill grinding is very similar to the samples from the Mitchell deposit. The A x b values of the 2 tested samples are very close for upper Kerr and Mitchell, 46.1 and 47.0, respectively.
Upper Kerr Cu-Mo Bulk Concentrate Flotation Results
Upper Kerr samples were tested using the same flotation flowsheet developed with Mitchell and Sulphurets samples.
The open circuit batch flotation tests showed that the upper Kerr samples produced better concentrate grades than the Mitchell or Sulphurets samples. Copper recovery produced was slightly lower than the Mitchell or Sulphurets samples at the equivalent copper concentrate tenor. Gold recovery for the upper Kerr samples was lower because the gold head grades were considerably lower than the samples from the Mitchell and Sulphurets deposits.
The LCT results, as presented in Table 13.18, indicate that the metallurgical performance of the upper Kerr samples was not as good as that achieved with the Mitchell and Sulphurets samples, despite their lower copper head grades. The inferior metallurgical performance of the upper zone materials may be caused by oxidation and more clay mineral contents.
On average, the upper Kerr samples produced a 27.8% copper concentrate. The copper and gold reporting to the concentrate were 83% and 41%, respectively. Approximately 51% of the gold reported to the gold-bearing pyrite products (first cleaner tailing and gold-bearing pyrite concentrate). The 2011/2012 test program produced better metallurgical performance from the samples tested than what had been achieved previously.
The flotation LCT results for the metallurgical performance of the Mitchell-Kerr blend sample (80% Mitchell and 20% upper Kerr) are presented in Table 13.8 of the Mitchell mineralization section. Similar performance was observed between the blended samples and Mitchell samples.
Seabridge Gold Inc. | 13-23 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Table 13.18 LCT Results – Upper Kerr (G&T)
Test Program* | Comp |
Grind Size (P80 µm**) |
Head Grade | Bulk Conc. Grade | Flotation Recovery | ||||||
Cu
(%) |
Au
(g/t) |
Ag
(g/t) |
Cu
(%) |
Au
(g/t) |
Ag
(g/t) |
Cu
(%) |
Au
(%) |
Ag
(%) |
|||
G&T 2535/16 | Comp 52 | 119/15 | 0.59 | 0.22 | 1.9 | 22.3 | 4.05 | 33.5 | 81.6 | 38.8 | 37.6 |
G&T 2535/17 | Comp 53 | 122/14 | 0.62 | 0.25 | 1.4 | 29.3 | 5.58 | 31.8 | 80.6 | 37.7 | 37.9 |
G&T 3174/10 | Composite 10 | 124/18 | 0.59 | 0.24 | 2 | 30.7 | 7.2 | 49 | 86.3 | 49.7 | 39.8 |
G&T 3174/11 | Composite 11 | 130/19 | 0.69 | 0.24 | 3 | 29.0 | 5.1 | 77 | 83.4 | 41.1 | 47.4 |
Note: | *Au grade in the Bulk Cleaner Tailings ranged from 0.51 to 0.97 g/t Au, averaging at 0.70 g/t Au; Au grade in the pyrite concentrate ranged from 0.38 to 0.66 g/t Au, averaging at 0.55 g/t Au. |
**Primary grind size/regrind size
Cyanidation Leach Results
The first cleaner tailing and the gold-pyrite concentrate from the varied flotation circuit were subjected to cyanide leaching for additional gold and silver recovery. G&T conducted cyanidation tests on the products produced from the locked cycle flotation tests; CIL procedure was used for the leaching process. Test results are provided in Table 13.19.
On average, gold extraction from both the gold-bearing products was approximately 57%, slightly lower than the results obtained from the Mitchell samples. The average gold feed grade to the cyanide leach circuit was lower in comparison with the cyanide leach feeds of the Mitchell samples. The test results also indicated that the first cleaner tailing produced slightly lower gold and silver recoveries compared to the gold-bearing pyrite concentrate. The average silver extraction was 32%, which was lower than the average extraction of 56% obtained from the Mitchell samples.
Table 13.19 Cyanidation Test Results on LCT Products – Upper Kerr (G&T)
Test
Program |
Sample |
Regrind
Size (P80 µm) |
Feed
(Au g/t) |
Extraction
(Au %) |
Feed
(Ag g/t) |
Extraction
(Ag %) |
G&T 2535/G&T 2897 | Comp 52 | 17 | 1.1 | 76.0 | 5.5 | 45.8 |
G&T 2535/G&T 2897 | Comp 53 | 15 | 0.6 | 59.7 | 3.2 | 18.7 |
G&T 3174 | Composite 10 | 20 | 0.6 | 47.2 | ||
G&T 3174 | Composite 11 | 20 | 0.6 | 45.6 | ||
Average – Upper Kerr | 18 | 0.7 | 57.1 | 4.4 | 32.3 |
13.4.6 | Deep Kerr Zone Major Metallurgical Test Results |
Five test programs were completed by ALS Metallurgy from 2013 to 2017 with drill core samples from the Deep Kerr Zone. KM3735, KM4029-B, and KM4514 tests were completed between 2013 and 2015. KM5063 and KM5266 has been completed in 2017 with some of the test results reported in the 2016 PFS report, which are summarized in Table 13.20. The rest of the work will be discussed in the present test work review of this report.
Deep Kerr Samples Characteristics
Composite samples from the Deep Kerr Zone were prepared for metallurgical testing from the drill core intervals.
Chemical Composition and Mineralogy
The metal assays of the individual and master composites samples are summarized in Table 13.20 and Table 13.21. With individual samples, the copper concentration varied from 0.18% to 1.75% Cu, averaging at 0.56% Cu. The master samples presented less variations of the copper grade: between 0.25% and 0.67% Cu with an average of 0.47% Cu.
Seabridge Gold Inc. | 13-24 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Table 13.20 Individual Test Samples – Deep Kerr (2012–2016)
Year/Test Program |
Sample Quantity |
Cu
(%) |
Au
(g/t) |
Ag
(g/t) |
Mo (%) |
||||||||
Min | Max | Ave | Min | Max | Ave | Min | Max | Ave | Min | Max | Ave | ||
2012/KM3735 | 1 | 0.92 | 0.32 | 5 | 0.004 | ||||||||
2013/KM4029 | 6 | 0.41 | 1.75 | 0.89 | 0.27 | 1.04 | 0.62 | 1 | 4 | 3 | 0.004 | 0.008 | 0.006 |
2014/KM4514 | 12 | 0.25 | 0.86 | 0.52 | 0.12 | 0.76 | 0.34 | 1 | 4 | 2 | 0.002 | 0.009 | 0.005 |
2016/KM5063 | 17 | 0.18 | 0.86 | 0.51 | 0.24 | 0.58 | 0.40 | 0.3 | 4 | 2 | 0.001 | 0.005 | 0.003 |
2016/KM5266 | 6 | 0.22 | 0.67 | 0.40 | 0.25 | 0.50 | 0.42 | 2 | 4 | 3 | 0.001 | 0.003 | 0.002 |
Overall | 0.18 | 1.75 | 0.56 | 0.12 | 1.04 | 0.41 | 0.3 | 5 | 2 | 0.001 | 0.009 | 0.004 |
Table 13.21 Master Test Samples – Deep Kerr (2012–2016)
Year/Test Program |
Sample Quantity |
Cu
(%) |
Au
(g/t) |
Ag
(g/t) |
Mo (%) |
||||||||
Min | Max | Ave | Min | Max | Ave | Min | Max | Ave | Min | Max | Ave | ||
2014/KM4514 | 5 | 0.46 | 0.54 | 0.50 | 0.20 | 0.44 | 0.31 | 1 | 3 | 2 | 0.003 | 0.006 | 0.004 |
2016/KM5063 | 13 | 0.25 | 0.67 | 0.47 | 0.30 | 0.84 | 0.40 | 0.8 | 3 | 2 | 0.002 | 0.006 | 0.003 |
2016/KM5266 | 2 | 0.25 | 0.51 | 0.38 | 0.35 | 0.43 | 0.39 | 3 | 4 | 4 | 0.002 | 0.003 | 0.003 |
Overall | 0.25 | 0.67 | 0.47 | 0.20 | 0.84 | 0.37 | 1 | 4 | 2 | 0.002 | 0.006 | 0.003 |
Seabridge Gold Inc. | 13-25 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
The mineralogical composition of some of the Deep Kerr head samples indicated that the primary copper sulphide mineral was chalcopyrite with a high pyrite content between 5.5% and 10.9%.
Grindability
The Deep Kerr Zone master samples exhibited moderately soft to average hardness to ball mill grinding process. The average Bond ball mill work index is 13.9 kWh/t, ranging from 13.2 to 15.0 kWh/t.
Deep Kerr Cu-Mo Bulk Concentrate Flotation Results
Deep Kerr samples were tested using the same flotation flowsheet developed with the Mitchell, Sulphurets, and upper Kerr samples. In addition to batch open circuit cleaner flotation tests, flotation LCTs were completed, with the results shown in Table 13.22.
The LCT results show that the Deep Kerr mineralizations responded well to the tested flow sheet. The copper recovery ranged from 86% to 97%, and the gold recovery varied from 56% to 77%. The flotation copper concentrate grades were between 22.8% and 28.7%.
Seabridge Gold Inc. | 13-26 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Table 13.22 Flotation LCT Results – Deep Kerr
Test | Sample |
Grind
Size
(P80 µm**) |
Head Grade | Bulk Conc. Grade | Recovery | |||||||||
Cu
(%) |
Au
(g/t) |
Ag
(g/t) |
Mo
(%) |
Cu
(%) |
Au
(g/t) |
Ag
(g/t) |
Mo
(%) |
Cu
|
Au
|
Ag
|
Mo
|
|||
KM4029-22 | DK2013-01 | 118/15/15 | 0.59 | 0.36 | 1.9 | 0.007 | 25.3 | 11.5 | 36.5 | 0.243 | 92.7 | 69.2 | 41.0 | 78.1 |
KM4029-23 | DK2013-02 | 119/15/11 | 0.44 | 0.23 | 2.0 | 0.004 | 24.4 | 9.0 | 48.0 | 0.157 | 90.6 | 62.6 | 40.0 | 67.4 |
KM4029-18 | DK2013-03 | 121/14/10 | 0.50 | 0.94 | 4.0 | 0.007 | 23.0 | 32.9 | 136 | 0.215 | 89.7 | 68.2 | 65.3 | 59.4 |
KM4029-17 | DK2013-04 | 116/16/- | 0.86 | 0.50 | 2.0 | 0.003 | 26.3 | 9.5 | 46.0 | 0.068 | 91.2 | 55.8 | 69.9 | 58.6 |
KM4029-16 | DK2013-04 | 116/15/11 | 0.82 | 0.50 | 2.4 | 0.004 | 26.3 | 10.6 | 48.0 | 0.071 | 93.6 | 61.5 | 58.3 | 54.8 |
KM4029-26* | DK2013-05 | 127/23/10 | 1.83 | 0.93 | 3.3 | 0.002 | 28.7 | 11.2 | 43.5 | 0.010 | 96.6 | 74.7 | 80.5 | 26.4 |
KM4029-24* | DK2013-05 | 127/30/11 | 1.81 | 0.93 | 3.1 | 0.002 | 22.8 | 9.4 | 33.8 | 0.006 | 96.6 | 77.1 | 82.6 | 29.6 |
KM4029-25 | DK2013-06 | 128/15/9 | 1.44 | 0.67 | 3.4 | 0.004 | 28.4 | 9.3 | 50.0 | 0.039 | 92.7 | 65.5 | 69.2 | 50.4 |
KM4514-23 | DK-2014-MC3 | 124/16/15 | 0.52 | 0.32 | 2 | 0.004 | 23.5 | 10.2 | 55 | 0.164 | 91.4 | 65.9 | 58.5 | 76.4 |
KM4514-24 | DK-2014-MC1 | 121/16/18 | 0.55 | 0.42 | 2 | 0.003 | 24.7 | 14.8 | 36 | 0.091 | 91.3 | 72.6 | 48.7 | 62.8 |
KM4514-25 | DK-2014-MC2 | 126/16/16 | 0.51 | 0.21 | 3 | 0.005 | 26.4 | 7.3 | 74 | 0.210 | 86.1 | 56.9 | 46.3 | 67.1 |
KM4514-26 | DK-2014-MC4 | 115/16/16 | 0.57 | 0.47 | 1 | 0.003 | 27.4 | 18.6 | 34 | 0.104 | 89.5 | 73.8 | 48.4 | 67.1 |
KM4514-27 | DK-2014-MC5 | 128/16/16 | 0.50 | 0.24 | 3 | 0.006 | 26.9 | 8.8 | 99 | 0.266 | 88.5 | 59.1 | 63.9 | 74.7 |
ALS 4514/31*** | Mitchell (Mitchell M1#)/Kerr (DK-2014-MC3) | 129/17/17 | 0.37 | 0.59 | 3 | 0.006 | 24.5 | 28.3 | 150 | 0.328 | 87.9 | 62.8 | 57.2 | 75.1 |
Notes: | *Au grade in the Bulk Cleaner Tailings ranged from 0.29 to 1.07 g/t Au, averaging at 0.64 g/t Au; Au grade in the pyrite concentrate ranged from 0.11 to 0.66 g/t Au, averaging at 0.27 g/t Au. |
**Primary grind size/regrind size
***Repeat tests, the cleaner flotation for Test 26 was conducted on more diluted slurry (using a larger flotation cell)
#Sample ID relabeled, see note in Table 13.7
Seabridge Gold Inc. | 13-27 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Cyanidation Leach Results
ALS Metallurgy conducted cyanidation tests on the first cleaner tailing and the gold-bearing pyrite concentrate produced from the flotation LCTs. Test results are presented in Table 13.23. The gold extractions by cyanide leaching (CIL procedure) fluctuated from 57% to 73% for the bulk cleaner scavenger tailing and from 64% to 78% for the gold-bearing pyrite concentrates.
Table 13.23 Preliminary Cyanidation Test Results – Deep Kerr
Test | Sample | Extraction* | |
Gold (%) | Silver (%) | ||
KM4029-29 | Test 22,23 Bulk Cleaner Scavenger Tailing | 72.6 | 86.2 |
KM4029-30 | Test 22,23 Gold-Bearing Pyrite Concentrate | 77.2 | 90.8 |
KM4029-31 | Test 16,18 Bulk Cleaner Scavenger Tailing | 59.1 | 76.5 |
KM4029-32 | Test 16,18 Gold-Bearing Pyrite Concentrate | 73.9 | 91.2 |
KM4029-33 | Test 24,25 Bulk Cleaner Scavenger Tailing | 57.5 | 73.1 |
KM4029-34 | Test 24,25 Gold-Bearing Pyrite Concentrate | 72.2 | n/a |
KM4514-33 | Bulk Cleaner Scavenger Tailing | 64.2 | 82.6 |
KM4514-34 | Gold-Bearing Pyrite Concentrate | 77.8 | 70.8 |
KM4514-35 | Bulk Cleaner Scavenger Tailing | 68.1 | 56.9 |
KM4514-36 | Gold-Bearing Pyrite Concentrate | 72.9 | 78.9 |
KM4514-37 | Bulk Cleaner Scavenger Tailing | 66.3 | 78.2 |
KM4514-38 | Gold-Bearing Pyrite Concentrate | 68.4 | 54.3 |
KM4514-39 | Bulk Cleaner Scavenger Tailing | 58.2 | 75.7 |
KM4514-40 | Gold-Bearing Pyrite Concentrate | 63.7 | 72.1 |
KM4514-41 | Bulk Cleaner Scavenger Tailing** | 56.6 | 71.9 |
KM4514-42 | Gold-Bearing Pyrite Concentrate** | 67.1 | 71.8 |
Notes: |
* Cyanide concentration: 1,000 ppm; pH: 11; carbon addition:
28 g/L
** Mitchell (Mitchell Year 0-5)/ Kerr (DK-2014-MC3) |
The mineralogical study by Surface Science Western (SSW) on the leaching residues from Test KM4514-41 found that the residual gold is present in colloidal type sub-microscopic gold, mainly in pyrite, which occurs in coarse and porous types. SSW pointed out that the pre-treatment by pressure or bio-oxidation would be required to release this locked gold.
13.4.7 | Iron Cap Zone Major Metallurgical Test Results |
Previous test programs on Iron Cap were conducted in 2010 and between 2014 to 2015. The 2010 test work was based on two composite samples, while further tests in 2014 and 2015 were performed using samples from lower Iron Cap zone.
Iron Cap Samples Characteristics
Chemical Composition and Mineralogy
The assays of the head samples from the Iron Cap zone are summarized in Table 13.24 and Table 13.25. The average copper and gold grades of the individual Iron Cap samples were 0.29% Cu and 0.54 g/t Au, which is similar with the master sample results.
Seabridge Gold Inc. | 13-28 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Table 13.24 Individual Test Samples – Iron Cap (2010–2015)
Year/Test Program |
Sample Quantity |
Cu (%) | Au (g/t) | Ag (g/t) | Mo (%) | ||||||||
Min | Max | Avg | Min | Max | Avg | Min | Max | Avg | Min | Max | Avg | ||
2013/2014 | 3 | 0.22 | 0.25 | 0.24 | 0.28 | 0.59 | 0.45 | 3 | 4 | 4 | 0.003 | 0.008 | 0.006 |
2014/2015 | 15 | 0.16 | 0.47 | 0.30 | 0.11 | 1.72 | 0.56 | 1 | 10 | 4 | 0.001 | 0.007 | 0.004 |
Overall | 0.16 | 0.47 | 0.29 | 0.11 | 1.72 | 0.54 | 1 | 10 | 4 | 0.001 | 0.008 | 0.004 |
Table 13.25 Master Test Samples – Iron Cap (2010–2015)
Year/Test Program |
Sample Quantity |
Cu (%) | Au (g/t) | Ag (g/t) | Mo (%) | ||||||||
Min | Max | Avg | Min | Max | Avg | Min | Max | Avg | Min | Max | Avg | ||
2010 | 3 | 0.14 | 0.36 | 0.25 | 0.32 | 1.06 | 0.71 | 5 | 6 | 6 | 0.002 | 0.003 | 0.003 |
2014/2015 | 4 | 0.16 | 0.34 | 0.27 | 0.35 | 0.63 | 0.49 | 2 | 5 | 4 | 0.002 | 0.004 | 0.003 |
Overall | 0.14 | 0.36 | 0.26 | 0.32 | 1.06 | 0.58 | 2 | 6 | 4 | 0.002 | 0.004 | 0.003 |
Seabridge Gold Inc. | 13-29 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Preliminary mineralogy work was conducted in 2010 and 2015. The results from the two programs indicated that chalcopyrite is the major copper-bearing mineral with a portion of chalcocite, covellite, and tennantite/tetrahedrite. Pyrite is the dominant sulphide mineral. Feldspars, micas, and quartz are the main gangue minerals.
Grindability
The 2010 grindability determination tests on the two Iron Cap composite samples showed that the mineralization is of moderate hardness to ball mill grinding. The Bond ball mill work indices of both the samples are 14.9 kWh/t.
The IC-2014-MC4 master composite tested by the 2015 test work shows a slightly higher Bond ball mill work index of 16.5 kWh/t. The Ai was measured to be 0.099 g.
The program also tested the grindability of the sample to SAG mill grinding using the SMC procedure. The results show that the SMC parameters are A = 68.7, b = 0.54, and A x b = 37.1.
Iron Cap Cu-Mo Bulk Concentrate Flotation Results
Using the same metallurgical flowsheets used for the other deposits, Iron Cap samples were tested with batch open circuit flotation test procedure, including cleaner flotation tests, and locked cycle flotation test procedure.
In the 2014 testing program, a total of 15 drill core interval composite samples (assay coarse rejects), including four composite samples constructed from the 15 assay reject samples, were used for variability tests. The target primary grind sizing was 80% passing 125 μm. The pH was adjusted to 10.5 in the rougher flotation and 11.5 in the cleaner flotation with lime.
As shown in Figure 13.6 and Figure 13.7, copper recoveries to the bulk concentrates (open circuit batch tests) for the 15 Iron Cap variability samples ranged from 74% to 85% and averaged approximately 81%. The bulk concentrate grades ranged from approximately 25% to 30% copper, averaging around 27% copper. Considerable variation in gold recovery into the flotation concentrate was observed. On average, approximately 57% of the gold was recovered into the final cleaner concentrates from open circuit batch flotation.
Seabridge Gold Inc. | 13-30 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 13.6 Variability Test Results – Copper – Iron Cap, 2015 (ALS) – KM4672
Source: | ALS Canada, Ltd., ALS Metallurgy Kamloops (2015). Preliminary Metallurgical Testing – Iron Cap – KSM Project – (KM 4672). August 04, 2015. |
Figure 13.7 Variability Test Results – Gold – Iron Cap, 2015 (ALS) – KM4672
Source: | ALS Canada, Ltd., ALS Metallurgy Kamloops (2015). Preliminary Metallurgical Testing – Iron Cap – KSM Project – (KM 4672). August 04, 2015. |
The rougher flotation tests for Composite IC-2014-MC4 conducted in 2015 showed that copper and gold recoveries were improved, after the primary grind size had been reduced from 80% passing 171 µm to 80% passing 89 µm. The test results are depicted in Figure 13.8 and Figure 13.9.
Seabridge Gold Inc. | 13-31 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 13.8 Copper Recovery vs. Rougher Mass Recovery and Grind Size – Iron Cap, 2015 (ALS) – KM4672
Source: | ALS Canada, Ltd., ALS Metallurgy Kamloops (2015). Preliminary Metallurgical Testing – Iron Cap – KSM Project – (KM 4672). August 04, 2015. |
Figure 13.9 Gold Recovery vs. Rougher Mass Recovery and Grind Size – Iron Cap, 2015 (ALS) – KM4672
Source: | ALS Canada, Ltd., ALS Metallurgy Kamloops (2015). Preliminary Metallurgical Testing – Iron Cap – KSM Project – (KM 4672). August 04, 2015. |
The flotation LCT results are presented in Table 13.26. The results indicate that the copper recoveries from the Iron Cap samples were comparable to the Mitchell mineralization. The gold recoveries to the concentrates from the 2012 samples were lower than those achieved with the Mitchell mineralization; however, the 2014/2015 test work produced better gold recoveries to the flotation concentrates and the results are in line with the Mitchell mineralization. The averaged silver recovery to the flotation concentrate was slightly higher than the recovery achieved from the Mitchell mineralization. On average, approximately 61% of the molybdenum from the Iron Cap samples reported to the final bulk concentrate.
As shown in Table 13.8, the Mitchell and Iron Cap blended samples did not show detrimental effects of the blending on the metallurgical responses.
Seabridge Gold Inc. | 13-32 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Table 13.26 Locked Cycle Test Results – Iron Cap
Test Program* | Composite |
Grind Size (P80 µm**) |
Head Grade | Bulk Conc. Grade | Flotation Recovery | |||||||||
Cu
(%) |
Au
(g/t) |
Ag
(g/t) |
Mo
(%) |
Cu
(%) |
Au
(g/t) |
Ag
(g/t) |
Mo
(%) |
Cu
(%) |
Au
(%) |
Ag
(%) |
Mo
(%) |
|||
G&T 2748/11 |
Iron Cap 2010
Composite1 |
150/15 | 0.14 | 1.28 | 6 | 0.002 | 25.4 | 147 | 774 | 0.180 | 81.6 | 55.2 | 61.0 | 37.9 |
G&T 2748/12 |
Iron Cap 2010
Composite2 |
147/22 | 0.38 | 0.31 | 5 | 0.003 | 24.9 | 10 | 255 | 0.115 | 88.1 | 45.0 | 62.0 | 55.2 |
G&T 2748/17 |
50%Comp 1:
50%Comp 2 |
108/19 | 0.26 | 0.82 | - | 0.003 | 26.7 | 51.9 | - | 0.144 | 85.2 | 53.3 | - | 41.5 |
ALS 4029/19 | IC-2013-01 | 117/16/7 | 0.25 | 0.56 | 3 | 0.006 | 26.7 | 50.4 | 179 | 0.481 | 83.4 | 71.4 | 48.4 | 69.0 |
ALS 4029/20 | IC-2013-02 | 119/17/11 | 0.26 | 0.51 | 4 | 0.004 | 22.9 | 36.4 | 273 | 0.238 | 85.4 | 68.4 | 62.8 | 64.4 |
ALS 4029/21 | IC-2013-03 | 130/15/11 | 0.23 | 0.24 | 4 | 0.003 | 23.4 | 14.8 | 258 | 0.205 | 87.5 | 53.4 | 56.3 | 56.4 |
ALS 4514/30*** | IC-2014-MC1 | 125/14/14 | 0.33 | 0.69 | 4 | 0.004 | 25.4 | 41.5 | 230 | 0.238 | 87.1 | 67.8 | 60.1 | 70.3 |
ALS 4514/29*** | IC-2014-MC2 | 127/14/16 | 0.25 | 0.45 | 4 | 0.004 | 23.4 | 29.3 | 275 | 0.311 | 85.7 | 59.1 | 56.0 | 76.2 |
ALS 4514/31*** | IC-2014-MC3 | 124/16/18 | 0.16 | 0.32 | 2 | 0.002 | 22.6 | 37.6 | 139 | 0.187 | 81.4 | 67.9 | 47.4 | 62.9 |
ALS 4514/25*** | IC-2014-MC4 | 124/14/15 | 0.28 | 0.56 | 4 | 0.003 | 24.9 | 36.2 | 250 | 0.257 | 85.7 | 62.9 | 65.1 | 73.6 |
Notes: | *Au grade in the Bulk Cleaner Tailings ranged from 0.61 to 2.17 g/t Au, averaging at 1.27 g/t Au; Au grade in the pyrite concentrate ranged from 0.08 to 1.88 g/t Au, averaging at 0.52 g/t Au. |
**Primary grind size/regrind size
***Including a copper flotation on the pyrite flotation concentrate
Seabridge Gold Inc. | 13-33 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Cyanidation Leach Results
G&T conducted cyanidation tests on the first cleaner tailing and the gold-bearing pyrite concentrate produced from the flotation LCTs. Test results are provided in Table 13.27.
Table 13.27 Cyanidation Test Results on LCT Products – Iron Cap
Testing
Program |
Sample |
Regrind
Size (P80 µm) |
Feed
(Au g/t) |
Extraction
(Au %) |
Feed
(Ag g/t) |
Extraction
(Ag %) |
G&T-2748 | Iron Cap Comp1 | 14 | 1.9 | 49.7 | 9.4 | 62.8 |
G&T-2748 | Iron Cap Comp2 | 15 | 1.1 | 40.4 | 6.9 | 56.8 |
G&T-2748 | 50% Comp1/50% Comp2 | 16 | 1.5 | 48.6 | - | - |
ALS-4029 | IC-2013-01/02/03 Cl.Sc.Tls | 16 | 0.8 | 45.8 | 4.4 | 70.7 |
ALS-4029 | IC-2013-01/02/03 Py Conc | 10 | 0.2 | 54.7 | 1.6 | 87.4 |
ALS-4672 | IC-2014-MC1 Cl.Sc.Tls | 14 | 1.1 | 46.7 | 6 | 68.0 |
ALS-4672 | IC-2014-MC2 Cl.Sc.Tls | 14 | 1.2 | 29.2 | 7 | 69.7 |
ALS-4672 | IC-2014-MC4 Cl.Sc.Tls | 14 | 1.1 | 40.1 | 6 | 60.5 |
ALS-4672 | IC-2014-MC1 Py Conc | 14 | 0.4 | 50.6 | 3 | 57.2 |
ALS-4672 | IC-2014-MC2 Py Conc | 16 | 0.3 | 36.3 | 2 | 72.0 |
ALS-4672 | IC-2014-MC4 Py Conc | 15 | 0.1 | 74.9 | 5 | 73.2 |
Average – Iron Cap | 15 | 1.0 | 46.8 | 5.6 | 66.5 | |
On average, the gold extraction from both the gold-bearing products was approximately 47%. As compared with the Mitchell samples, Iron Cap samples produced lower gold recoveries, especially for leaching of the first cleaner tailing. The average silver extraction of 67% is higher than the average extraction of 56% obtained the Mitchell samples.
13.5 | Recent Test Work 2017–2020 |
Since 2017, further testing programs have been carried out on the samples from the Deep Kerr deposit and the Iron Cap deposit to investigate their metallurgical response to the previously developed process flowsheet. The respective mineralogical characteristics and ore grindability have also been determined.
13.5.1 | Deep Kerr Zone Metallurgical Test Work (2016/2017) |
In 2017, two additional metallurgical testing programs, KM5063 and KM5266, have been completed by ALS Metallurgy with the Deep Kerr deposit samples.
Deep Kerr Samples
Variability and master samples were prepared for both the test programs. The samples used in test program KM5036 included 1) the coarse assay reject materials at a size minus 6 mesh (3.4 mm) for approximately 783 kg, and 2) the fresh half core samples of approximately 262 kg. The samples used in test program KM5266 were assay reject materials less than 10 mesh (2 mm), with a total weight of approximately 662 kg.
Seabridge Gold Inc. | 13-34 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Table 13.28 displays the major chemical composition of the head samples in the test program KM5063. All the individual samples and master samples including Master Composites 215E, 215W, 280, 775, and Overall were prepared with coarse reject materials; the remaining master samples were composited using half drill cores. In addition, composite samples, DK-2014-MC3 and Mitchell M1 from other programs (KM4514 and KM3080), were also tested in KM5063.
Table 13.28 Metal Contents of Composites – Deep Kerr, 2016/2017 (ALS KM5063)
Master Samples* | Metal Content | Individual Samples | Metal Content | ||||||
Cu
(%) |
Au
(g/t) |
Mo
(%) |
Ag
(g/t) |
Cu
(%) |
Au
(g/t) |
Mo
(%) |
Ag
(g/t) |
||
DK-2015-Master-215E | 0.46 | 0.34 | 0.005 | 1.1 | DK-2015-215E-01 | 0.34 | 0.25 | 0.005 | 0.3 |
DK-2015-Master-215W | 0.51 | 0.43 | 0.002 | 2.6 | DK-2015-215E-02 | 0.52 | 0.37 | 0.005 | 0.7 |
DK-2015-Master-280 | 0.48 | 0.36 | 0.003 | 2.1 | DK-2015-215W-01 | 0.51 | 0.34 | 0.002 | 2.6 |
DK-2015-Master-775 | 0.53 | 0.31 | 0.003 | 1.8 | DK-2015-215W-02 | 0.49 | 0.49 | 0.002 | 3.2 |
DK-2015-Overall Master | 0.50 | 0.36 | 0.003 | 1.9 | DK-2015-215W-03 | 0.51 | 0.50 | 0.002 | 2.4 |
DK-2015-215E Comp 2** | 0.48 | 0.31 | 0.003 | 0.8 | DK-2015-215W-04 | 0.49 | 0.45 | 0.002 | 2.4 |
DK-2015-215W Comp 2** | 0.30 | 0.39 | 0.002 | 1.5 | DK-2015-215W-05 | 0.50 | 0.58 | 0.002 | 2.8 |
DK-2015-280 Comp 2** | 0.42 | 0.37 | 0.002 | 1.4 | DK-2015-215W-06 | 0.44 | 0.32 | 0.001 | 1.8 |
DK-2015-775 Comp 2** | 0.49 | 0.30 | 0.004 | 1.7 | DK-2015-215W-07 | 0.54 | 0.38 | 0.005 | 2.7 |
DK-2015 Comp P2A** | 0.59 | 0.39 | 0.002 | 1.0 | DK-2015-215W-08 | 0.50 | 0.52 | 0.004 | 1.8 |
DK-2015 Comp P2B** | 0.67 | 0.36 | 0.006 | 1.1 | DK-2015-215W-09 | 0.86 | 0.51 | 0.004 | 3.4 |
DK-2015 Comp SED’s WR** | 0.25 | 0.84 | 0.003 | 1.9 | DK-2015-215W-10 | 0.86 | 0.48 | 0.002 | 4.1 |
DK-2015-215W-11 | 0.18 | 0.24 | 0.001 | 1.3 | |||||
DK-2015-280-1 | 0.42 | 0.36 | 0.003 | 2.2 | |||||
DK-2015-280-2 | 0.50 | 0.43 | 0.002 | 1.5 | |||||
DK-2015-775-01 | 0.52 | 0.27 | 0.003 | 0.8 | |||||
DK-2015-775-02 | 0.49 | 0.38 | 0.003 | 2.1 | |||||
Notes | *Master composite samples were prepared to represent different proposed “block caving” zones 215 W, 215E, 775, and 280 |
**Constructed from half drill core samples
Seabridge Gold Inc. | 13-35 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Table 13.29 shows the major chemical compositions of the head samples used in the KM5266 test program involving six individual samples and two master samples.
Table 13.29 Metal Contents of Composites – Deep Kerr, 2017 (ALS KM5266)
Master Samples | Metal Content | Individual Samples | Metal Content | ||||||
Cu
(%) |
Au
(g/t) |
Mo
(%) |
Ag
(g/t) |
Cu
(%) |
Au
(g/t) |
Mo
(%) |
Ag
(g/t) |
||
Mineral Intrusive Blend | 0.51 | 0.35 | 0.002 | 3 | DK-2016-01 | 0.22 | 0.43 | 0.002 | 3 |
Wall Rock Sedimentary | 0.25 | 0.43 | 0.003 | 4 | DK-2016-02 | 0.49 | 0.39 | 0.002 | 2 |
DK-2016-03 | 0.67 | 0.50 | 0.001 | 2 | |||||
DK-2016-04 | 0.27 | 0.44 | 0.002 | 2 | |||||
DK-2016-05 | 0.50 | 0.25 | 0.003 | 2 | |||||
DK-2016-06 | 0.26 | 0.50 | 0.003 | 4 |
Grindability
A Bond ball mill work index testing has been conducted on the Deep Kerr master samples at a closing screen size of 106 µm. The measured BWi index is between 13.2 kWh/t and 15.0 kWh/t, which indicates the tested samples were moderately soft to average hardness. Table 13.30 displays the results.
Table 13.30 Bond Ball Mill Work Index Test Results – Deep Kerr, 2017 (ALS)
Samples | BWi (kWh/t) |
KM5063 | |
DK-2015 Master 215E | 13.2 |
DK-2015 Master 215W | 15.0 |
DK-2015 Master 280 | 14.6 |
DK-2015 Master 775 | 14.6 |
Average | 14.4 |
Mineralogy
The mineralogical composition of the Deep Kerr head samples has been determined in both the test programs and is summarized in Table 13.31. As with Mitchell Zone samples, the primary copper sulphide mineral has been identified as chalcopyrite. Pyrite content is high, between 5.1% and 10.9%. The resulting pyrite to chalcopyrite ratio is between 2.8:1 and 8.5:1.
Seabridge Gold Inc. | 13-36 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Table 13.31 Mineral Composition Data – Deep Kerr 2016/2017 (ALS)
Sample | Mineral Composition (%) | ||
Chalcopyrite | Pyrite | Gangue* | |
KM5063 | |||
DK-2015 Master 215E | 1.7 | 8.9 | 89.4 |
DK-2015 Master 215W | 1.4 | 5.5 | 93.1 |
DK-2015 Master 280 | 1.4 | 10.9 | 87.7 |
DK-2015 Master 775 | 1.7 | 10.0 | 88.3 |
KM5266 | |||
Mineral Intrusive Blend | 1.8 | 5.1 | 93.1 |
Wall Rock Sedimentary | 0.8 | 6.8 | 92.4 |
Note: | *Gangue minerals include iron oxides, quartz, feldspars, muscovite, chlorite, carbonates, biotite, apatite, calcium sulphate, titanium minerals, kaolinite, etc. |
As presented in Figure 13.10 and Figure 13.11, liberation rates of the copper sulphide minerals has also been estimated with a range from 56% to 66% (KM5063) and 53% to 61% (KM5266), at a primary grind size of 80% passing approximately 130 µm. Most unliberated copper sulphide particles were associated in binary form with non-sulphide gangue minerals.
Figure 13.10 KM5063 Copper Sulphides Liberation – Mitchell and Deep Kerr 2017 (ALS)
Source: ALS Metallurgy (2017). Preliminary Metallurgical Testing – Deep Kerr Zones – KSM Project (KM 5063). January 18, 2017.
Seabridge Gold Inc. | 13-37 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 13.11 KM5266 Copper Sulphides Liberation – Deep Kerr 2017 (ALS)
Source: ALS Metallurgy (2017), Preliminary Metallurgical Testing – Deep Kerr Zones – KSM Project (KM 5266), April 13, 2017.
Metallurgical and Processing Tests
The recent metallurgical testing on the Deep Kerr samples has been conducted to establish the metallurgical performance of the samples using the previous metallurgical flowsheet. The test flowsheet included conventional flotation to produce a copper-gold-molybdenum bulk concentrate, with cyanide leach testing to further recover gold and silver from the cleaner flotation tailing and the gold-bearing pyrite concentrate. A copper scavenging flotation has been added to float copper minerals from the gold-bearing pyrite concentrate prior to cyanidation.
Variability Flotation Tests
Batch open circuit cleaner flotation testing has been conducted on variability samples in both the KM5063 and KM5266 test programs. The metallurgical flowsheet is shown in Figure 13.12. In an effort to improve copper and gold recoveries, an optional flowsheet with two stages of regrinding on the bulk copper and gold rougher concentrate was tested in KM5063. The testing produced a low grade bulk copper and gold concentrate and the test results from this flowsheet are not included in the following discussions.
Seabridge Gold Inc. | 13-38 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 13.12 KM5063 and KM5266 Open Circuit Flotation Flowsheet – Deep Kerr 2016/2017 (ALS)
Source: ALS Metallurgy (2017), Preliminary Metallurgical Testing – Deep Kerr Zones – KSM Project (KM 5063) January 18, 2017 and ALS Metallurgy (2017), Preliminary Metallurgical Testing – Deep Kerr Zones – KSM Project (KM 5266) April 13, 2017.
The following observations have been made from both cleaner open cycle test programs:
● | Cleaner flotation tests in KM5063 – The coarse reject samples produced a relatively low copper recovery to the bulk concentrate, which ranged from 61% to 80%, at copper grades from 21% to 30% Cu. The test results were improved when using fresh drill core samples that produced a higher copper recovery from 81% to 90%, at copper grades from 18% to 31% Cu. The average gold recovery was similar, which was about 51% at a grade of 14 g/t Au for the coarse reject samples, and 48% and 17 g/t Au for the fresh core samples. |
● | Cleaner flotation tests in KM5266 – The fine reject samples produced copper recoveries ranged from 72% to 86% at grades from 18% to 28% Cu. The two master samples produced similar copper grades of the bulk concentrate between 25% and 26% Cu; the copper recovery was 81% for the Mineral Intrusive Blend composite master sample and 77% for the Wall Rock Sedimentary composite master sample. A similar gold recovery for the two master samples occurred between 50% and 51%; however, a higher gold grade of 29 g/t Au was produced from the Wall Rock Sedimentary sample, while the other was graded at 12 g/t Au. |
Locked Cycle Flotation Tests
The locked cycle flotation tests in the testing program KM5063 and KM5266 have been completed using the flowsheet from the previous tests (Figure 13.13) on the master samples.
Seabridge Gold Inc. | 13-39 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 13.13 KM5063 and KM5266 LCT Flotation Flowsheet – Deep Kerr 2016/2017 (ALS)
Source: ALS Metallurgy (2017), Preliminary Metallurgical Testing – Deep Kerr Zones – KSM Project (KM 5063) January 18, 2017 and ALS Metallurgy (2017), Preliminary Metallurgical Testing – Deep Kerr Zones – KSM Project (KM 5266) April 13, 2017.
The test results and the grind size information are presented in Table 13.32. The following major observations were made from these two sets of LCTs:
● | Locked cycle flotation tests in KM5063 – The coarse reject samples responded well to the applied flowsheet. Copper recovery to the bulk concentrates ranged from 81% to 88% and gold recovery varied from 55% to 77%. The bulk concentrate grades were 22% to 26% Cu and 11 g/t to 16 g/t Au. However, molybdenum grades in the bulk concentrates were low and between 0.09% and 0.24% Mo. |
As shown Table 13.32, the LCTs on the fresh drill core samples produced higher copper recoveries to the bulk concentrate ranged from 89% to 93%, grading at 25% and 27% Cu. Gold recoveries to the bulk concentrates were between 51% and 60%, with grades from 7.7 g/t to 42 g/t Au. This suggests that the assay reject samples might have undergone some degree surface oxidation.
● | Locked cycle flotation tests in KM5266 – For the Mineral Intrusive Blend master sample, approximately 90% copper was recovered to the bulk concentrate graded at 25% Cu; gold recovery was 61% at a grade of 12 g/t Au. For the Wall Rock Sedimentary master sample, copper recovery was about 85% at a grade of 21% Cu; the gold recovery was 62% graded at 28 g/t Au. Similarly, molybdenum grades of the bulk concentrate were low and between 0.04% and 0.11% Mo. |
Seabridge Gold Inc. | 13-40 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Table 13.32 Flotation Locked Cycle Test Results – Deep Kerr 2016/2017
Test* | Sample |
Grind Size
(P80 µm**) |
Feed Grade | Bulk Conc. Grade | Recovery | |||||||||
Cu
(%) |
Au
(g/t) |
Ag
(g/t) |
Mo
(%) |
Cu
(%) |
Au
(g/t) |
Ag
(g/t) |
Mo
(%) |
Cu
(%) |
Au
(% |
Ag
(%) |
Mo
(%) |
|||
KM5063-10 | DK2015-Overall Master | 121/15/14 | 0.50 | 0.36 | 3 | 0.003 | 25.7 | 12.8 | 81 | 0.15 | 84.1 | 57.4 | 49.1 | 70.9 |
KM5063-11 | DK2015-Master 215E | 115/16/15 | 0.47 | 0.33 | 2 | 0.005 | 23.2 | 12.7 | 51 | 0.24 | 87.1 | 67.6 | 51.2 | 81.4 |
KM5063-12 | DK2015-Master 215W | 120/14/14 | 0.51 | 0.45 | 3 | 0.003 | 25.8 | 15.6 | 103 | 0.091 | 87.5 | 59.6 | 53.3 | 61.3 |
KM5063-13 | DK2015-Master 280 | 134/16/15 | 0.48 | 0.38 | 2 | 0.003 | 21.6 | 11.3 | 63 | 0.093 | 84.0 | 56.6 | 53.0 | 53.6 |
KM5063-14 | DK2015-Master 775 | 133/16/15 | 0.54 | 0.34 | 2 | 0.003 | 24.5 | 10.6 | 68 | 0.13 | 81.5 | 56.7 | 52.6 | 71.3 |
KM5063-64 | DK2015-Fresh 775 | 125/17/17 | 0.51 | 0.26 | 2 | 0.004 | 25.1 | 7.7 | 56 | 0.11 | 91.5 | 55.6 | 52.6 | 48.6 |
KM5063-65 | DK2015-Fresh 280 | 130/16/19 | 0.43 | 0.34 | 2 | 0.002 | 26.3 | 12.2 | 79 | 0.068 | 90.4 | 53.1 | 51.5 | 44.1 |
KM5063-66 | DK2015-Fresh 215W | 122/14/17 | 0.33 | 0.38 | 3 | 0.002 | 27.4 | 18.1 | 166 | 0.043 | 90.1 | 50.5 | 56.8 | 23.0 |
KM5063-67 | DK2015-Fresh 215E | 120/18/19 | 0.49 | 0.28 | 1 | 0.003 | 25.9 | 9.4 | 38 | 0.078 | 93.1 | 60.3 | 47.0 | 42.6 |
KM5063-78 | DK2015-Fresh SEDS WR | 128/15/20 | 0.26 | 0.74 | 3 | 0.003 | 24.7 | 42.0 | 144 | 0.14 | 88.8 | 53.4 | 54.1 | 39.5 |
KM5266-09 | Mineral Intrusive Blend Master | 127/12/14 | 0.56 | 0.39 | 3 | 0.002 | 24.8 | 11.7 | 73 | 0.038 | 89.8 | 60.9 | 54.8 | 38.6 |
KM5266-10 | Wall Rock Sedimentary Master | 134/14/15 | 0.27 | 0.48 | 3 | 0.002 | 21.0 | 27.7 | 192 | 0.105 | 85.0 | 61.6 | 61.9 | 46.0 |
Notes: | *Au grade in the Bulk Cleaner Tailings ranged from 0.47 to 1.50 g/t Au, averaging at 0.76 g/t Au; Au grade in the pyrite concentrate ranged from 0.07 to 0.62 g/t Au, averaging at 0.24 g/t Au. |
**Grind Size includes primary grind size/bulk concentrate regrind size/pyrite concentrate regrind size.
Seabridge Gold Inc. | 13-41 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Leach Tests
DCN leach tests have been conducted by ALS Metallurgy in 2016/2017 on the bulk cleaner scavenger tailing and copper first cleaner tailing (pyrite concentrate) produced from the locked cycle testing programs KM5063 and KM5266. The direct leaching procedure for both programs are identical, including a 16-hour pre-aeration and a 24-hour cyanide leaching. Additional CIL tests were conducted in the test program KM5063.
All the leach test results are presented in Table 13.33. The average gold extraction rates from both the tailing samples are higher than previous results.
Table 13.33 Preliminary Cyanidation Test Results – Deep Kerr
Test | Head Samples |
Test
Procedure* |
Extraction (%) | |
Au | Ag | |||
Bulk Cleaner Scavenger Tailing Cyanidation | ||||
KM5063-15 | DK-2015-Overall Master | CIL | 62.2 | 83.6 |
KM5063-16 | DK-2015-Master 215E | CIL | 65.7 | 71.7 |
KM5063-17 | DK-2015-Master 215W | CIL | 61.0 | 55.5 |
KM5063-18 | DK-2015-Master 280 | CIL | 52.9 | 77.5 |
KM5063-19 | DK-2015-Master 775 | CIL | 54.6 | 82.2 |
KM5063-69 | DK-2015-Seds-WR | CIL | 58.1 | 74.8 |
KM5063-70 | DK-2015-775 Comp 2 | CIL | 61.5 | 69.6 |
KM5063-71 | DK-2015-280 Comp 2 | CIL | 48.2 | 72.7 |
KM5063-72 | DK-2015-215W Comp 2 | CIL | 57.1 | 79.8 |
KM5063-73 | DK-2015-215E Comp 2 | CIL | 60.8 | 73.5 |
KM5063-25 | DK-2015-Overall Master | DCN | 70.7 | 55.5 |
KM5063-40** | DK-2015-Overall Master | DCN | 64.2 | 42.6 |
KM5063-41** | DK-2015-Overall Master | DCN | 65.8 | 43.3 |
KM5063-74 | DK-2015-775 Comp 2 | DCN | 68.1 | 52.8 |
KM5063-75 | DK-2015-280 Comp 2 | DCN | 52.3 | 67.8 |
KM5063-76 | DK-2015-215W Comp 2 | DCN | 53.2 | 68.4 |
KM5063-77 | DK-2015-215E Comp 2 | DCN | 63.9 | 46.5 |
KM5063-79 | DK-2015-Seds-WR | DCN | 67.4 | 82.7 |
KM5266-11 | Mineral Intrusive Blend Master | DCN | 70.3 | 93.4 |
KM5266-12 | Wall Rock Sedimentary Master | DCN | 72.9 | 78.9 |
Copper First Cleaner Tailing Cyanidation (Au-Pyrite Concentrate) | ||||
KM5063-20 | DK-2015-Overall Master | CIL | 83.5 | 71.8 |
KM5063-21 | DK-2015-Master 215E | CIL | 91.5 | 58.3 |
KM5063-22 | DK-2015-Master 215W | CIL | 70.2 | 73.1 |
KM5063-23 | DK-2015-Master 280 | CIL | 71.9 | 58.2 |
KM5063-24 | DK-2015-Master 775 | CIL | 82.3 | 66.6 |
KM5266-13 | Mineral Intrusive Blend Master | DCN | 87.9 | 94.3 |
KM5266-14 | Wall Rock Sedimentary Master | DCN | 71.2 | 96.5 |
Notes: | *Cyanide concentration: 1,000 ppm; pH: 11; carbon addition: 28 g/L |
**Cyanidation was performed on a finer feed particle size
Seabridge Gold Inc. | 13-42 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
For the bulk cleaner scavenger tailing containing approximately 0.6 g/t to 1.6 g/t gold and 1.8 g/t to 6.3 g/t silver, the extractions fluctuated widely from 48% to 73% for gold, averaging 61.5%, and from 42% to 93% for silver, averaging 68.6%.
For the gold-bearing pyrite concentrates grading at 0.17 g/t to 0.49 g/t gold and 0.9 g/t to 2.0 g/t silver, the extractions also varied significantly, ranging from 70% to 92% for gold, averaging 79.8%, and from 58% to 97% for silver, averaging 74.1%. The gold and silver extractions varies substantially and did not exhibit correlations with the leach feed grades including gold and copper, as well as the regrind size which was maintained at 80% passing 14-15 µm.
The CIL test results also show that a significant amount of copper was leached out together with the precious metals. It appears that the copper dissolution had a significant impact on the gold adsorption onto the activated carbon but no obvious effect on the silver adsorption. On average, only approximately 66% of the extracted gold was captured onto the carbon.
In 2016, ALS Metallurgy also completed a metallurgical test program (KM5087) to generate materials for gold and silver extraction testing. The samples generated were the first cleaner scavenger tailings and pyrite concentrates from a blended master composite made up of both the Mitchell and Deep Kerr zone samples. ALS Metallurgy conducted preliminary cyanide leach tests after the samples had been treated by various pre-aeration methods. On average, approximately 64% of the gold was extracted. The average silver extraction was approximately 90%, while the copper extraction averaged at approximately 29%.
13.5.2 | Iron Cap Zone Metallurgical Test Work (2017–2020) |
Four additional metallurgical test programs, KM5248, KM5501, KM5806, and KM6004, have been performed by ALS Metallurgy on samples from Iron Cap zone through 2017 to 2020.
Iron Cap Samples
Coarse assay rejects and drill core samples have been used to construct the metallurgical composite samples in the four testing programs. Table 13.34 shows the major chemical analysis results of these samples. The copper content is between 0.01% and 0.86% Cu, while gold and silver grades are 0.17 g/t to 2.91 g/t Au and 1 g/t to 6 g/t Ag. The IC-2017-08 composite sample is from the area close to the surface (out of the potential upper panel caves), contains high gold and low copper (approximately 0.01% Cu), and has significantly different mineralogical characteristics. The sample contained elevated arsenic.
Seabridge Gold Inc. | 13-43 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Table 13.34 Metal Contents of Composites – Iron Cap, 2017/2018 (ALS KM5248/5501)
Test
Program |
Head Samples |
Cu
(%) |
Au
(g/t) |
Ag
(g/t) |
Mo
(%) |
Fe (%) |
S (%) |
Hg (g/t) |
As (%) |
KM5248 | IC-2016-01 | 0.86 | 0.97 | 5 | 0.003 | 3.8 | 3.26 | 0.60 | 0.01 |
IC-2016-02 | 0.37 | 0.42 | 6 | 0.007 | 3.1 | 3.18 | 0.28 | <0.01 | |
IC-2016-03 | 0.24 | 1.30 | 5 | 0.002 | 2.7 | 1.92 | 0.09 | <0.01 | |
IC-2016-04 | 0.18 | 0.78 | 4 | 0.002 | 3.6 | 1.56 | 0.05 | <0.01 | |
IC-2016-01/02 | 0.60 | 0.76 | 4 | 0.004 | 3.3 | 3.24 | n/a | n/a | |
IC-2016-003/04 | 0.21 | 1.00 | 3 | 0.001 | 3.1 | 1.66 | n/a | n/a | |
KM5501 | IC-2017-01 | 0.40 | 0.47 | 2 | 0.003 | 2.66 | 1.93 | 0.43 | <0.01 |
IC-2017-02 | 0.72 | 0.98 | 4 | 0.005 | 3.48 | 2.97 | 0.51 | <0.01 | |
IC-2017-03 | 0.25 | 0.50 | 3 | 0.003 | 0.24 | 2.47 | 0.21 | <0.01 | |
IC-2017-04 | 0.36 | 0.62 | 2 | 0.003 | 2.82 | 1.50 | 0.10 | <0.01 | |
IC-2017-05 | 0.39 | 0.63 | 4 | 0.004 | 3.17 | 3.27 | 0.14 | <0.01 | |
IC-2017-06 | 0.55 | 0.17 | 5 | 0.016 | 3.40 | 4.20 | 1.61 | 0.03 | |
IC-2017-07 | 0.25 | 0.69 | 1 | 0.002 | 3.43 | 1.80 | 0.07 | <0.01 | |
IC-2017-08 | 0.01 | 2.91 | <1 | <0.001 | 5.40 | 2.65 | 0.08 | 0.31 | |
IC-MC-A | 0.31 | 0.62 | 2 | 0.003 | 3.29 | 2.36 | 0.10 | <0.01 | |
IC-MC-B | 0.58 | 0.53 | 1 | 0.008 | 3.27 | 3.21 | 0.88 | <0.01 | |
IC-MC-C | 0.43 | 0.57 | 1 | 0.005 | 3.24 | 2.85 | 0.45 | <0.01 | |
KM5806 | IC-2018-01 | 0.18 | 0.19 | 2 | 0.006 | 3.3 | 2.08 | 0.27 | <0.01 |
IC-2018-02 | 0.36 | 0.37 | 2 | 0.003 | 3.9 | 1.99 | 0.42 | <0.01 | |
IC-2018-03 | 0.42 | 0.74 | 2 | 0.002 | 2.5 | 1.98 | 0.13 | <0.01 | |
IC-2018-04 | 0.28 | 0.35 | 2 | 0.005 | 3.6 | 1.44 | 0.10 | <0.01 | |
IC-2018-05 | 0.49 | 0.74 | 3 | 0.002 | 3.0 | 1.91 | 0.22 | <0.01 | |
IC-2018-06 | 0.34 | 0.57 | 4 | 0.007 | 5.6 | 6.40 | 3.04 | 0.11 | |
KM6004 | IC-2018-07 | 0.32 | 0.64 | 4 | 0.004 | 3.8 | 3.54 | 0.50 | 0.01 |
IC-2018-08 | 0.33 | 0.46 | 1 | 0.002 | 3.9 | 1.82 | 0.32 | <0.01 | |
IC-2018-09 | 0.38 | 0.36 | 2 | 0.001 | 2.4 | 1.72 | 0.20 | <0.01 | |
IC-2018-10 | 0.55 | 1.03 | 4 | 0.004 | 3.9 | 2.95 | 0.28 | <0.01 | |
IC-2018-11 | 0.38 | 0.53 | 2 | 0.002 | 3.1 | 2.46 | 0.51 | <0.01 | |
IC-2018-12 | 0.20 | 0.28 | 1 | 0.002 | 2.9 | 1.75 | 0.12 | <0.01 | |
IC-2018-13 | 0.47 | 0.39 | 4 | 0.005 | 3.3 | 3.81 | 0.85 | 0.02 | |
IC-2018-14 | 0.41 | 0.61 | 2 | 0.003 | 3.1 | 2.34 | 0.14 | <0.01 | |
IC-2018-15 | 0.32 | 0.51 | 2 | 0.003 | 3.3 | 1.91 | 0.14 | <0.01 | |
IC-2018-16 | 0.28 | 0.88 | 2 | 0.002 | 2.5 | 1.40 | 0.18 | <0.01 | |
IC-2018-17 | 0.37 | 0.47 | 2 | 0.002 | 2.6 | 2.39 | 0.20 | <0.01 | |
IC-2018-18 | 0.36 | 0.48 | 2 | 0.003 | 3.1 | 2.42 | 0.34 | <0.01 |
Seabridge Gold Inc. | 13-44 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Grindability
Bond ball mill work index tests were conducted as part of metallurgical programs KM5501, KM5806, and KM6004. The overall results are presented in Table 13.35, which shows that the work index ranges from 13.4 kWh/t to 17.4 kWh/t. The measured index indicates a moderate hardness to ball mill grinding for the tested Iron Cap samples. The measured abrasion index fluctuates between 0.094 g and 0.200 g, with an average level of 0.155 g.
In addition, SMC testing on the composite sample in the program KM5806 produced an A x b value of approximately 41 with a SAG Circuit Specific Energy value of 9.8 kWh/t.
Table 13.35 Bond Ball Mill Work Index Test Results – Deep Kerr, 2018 (ALS)
Samples |
Wi
(kWh/t) |
Samples |
Wi
(kWh/t) |
Samples |
Wi
(kWh/t) |
Abrasion Index (g) |
KM5501 | KM5806 | KM6004 | ||||
IC-2017-01 | 15.9 | IC-2018-01 | 17.4 | IC-2018-13 | 15.2 | 0.094 |
IC-2017-02 | 16.1 | IC-2018-02 | 15.8 | IC-2018-14 | 15.8 | 0.130 |
IC-2017-05 | 15.6 | IC-2018-03 | 15.6 | IC-2018-15 | 15.9 | 0.143 |
IC-2017-07 | 16.6 | IC-2018-04 | 15.9 | IC-2018-16 | 15.6 | 0.186 |
IC-2014-MC1 | 16.3 | IC-2018-05 | 15.6 | IC-2018-17 | 15.1 | 0.200 |
IC-2014-MC2 | 15.9 | IC-2018-06 | 13.4 | IC-2018-18 | 15.7 | 0.175 |
IC-2014-MC3 | 16.7 | |||||
IC-2016-01/02 | 17.4 | |||||
IC-2016-03/04 | 16.0 | |||||
IC-MC-A | 16.0 | |||||
IC-MC-B | 15.9 | |||||
KM5501 Average | 16.2 | KM5806 Average | 15.6 | KM6604 Average | 15.6 | 0.155 |
Overall Wi Average, kWh/t | 15.9 | |||||
Mineralogy
The mineralogical composition and liberations of the composite samples have been included in all the testing programs. Table 13.36 shows the major results. As with the Mitchell and Deep Kerr zone samples, the primary copper sulphide mineral identified is chalcopyrite. However, tennantite and enargite have been identified as secondary dominate copper minerals in the sample IC-2018-06.
The pyrite content is between 2.1 and 9.2. The pyrite-to-chalcopyrite ratio fluctuates between 1.8:1 and 23:1.
Seabridge Gold Inc. | 13-45 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Table 13.36 Mineral Composition Data – Iron Cap 2017-2020 (ALS)
Sample | Mineral Composition (%) |
Sizing
(µm) |
Liberation
(%) |
||||
Chalcopyrite |
Tennantite/
Enargite |
Other Cu
Minerals* |
Pyrite | Gangue | P80 |
Copper
Sulphide |
|
KM5248 | |||||||
IC-2016-01 | 2.4 | 0.1 | <.01 | 4.4 | 93.1 | 116 | 65 |
IC-2016-02 | 1.0 | <0.1 | <.01 | 5.5 | 93.5 | 127 | 53 |
IC-2016-03 | 0.6 | <0.1 | <0.1 | 2.6 | 96.8 | 121 | 54 |
KM5501 | |||||||
IC-2017-08 | <0.1 | <0.1 | <0.1 | 4.6 | 95.4 | 80 | 56 |
IC-MC-A | 0.7 | <0.1 | <0.1 | 3.8 | 95.5 | 123 | 46 |
IC-MC-B | 1.5 | 0.1 | <0.1 | 4.6 | 93.8 | 111 | 52 |
IC-2014-MC1 | 0.9 | <0.1 | <0.1 | 4.6 | 94.5 | n/a | n/a |
IC-2014-MC2 | 0.6 | <0.1 | 0.0 | 4.0 | 95.4 | n/a | n/a |
IC-2014-MC3 | 0.4 | - | <0.1 | 3.0 | 96.6 | n/a | n/a |
IC-2016-04 | 0.5 | - | <0.1 | 3.0 | 96.5 | n/a | n/a |
KM5806 | |||||||
IC-2018-01 | 0.4 | 0.0 | 0.0 | 3.8 | 95.8 | 82 | 41 |
IC-2018-02 | 0.8 | <0.1 | <0.1 | 3.3 | 95.9 | 95 | 40 |
IC-2018-03 | 1.2 | <0.1 | 0.0 | 3.6 | 95.2 | 86 | 46 |
IC-2018-04 | 0.8 | - | 0.0 | 2.2 | 97.0 | 85 | 52 |
IC-2018-05 | 1.2 | <0.1 | 0.0 | 2.1 | 96.7 | 85 | 44 |
IC-2018-06 | 0.4 | 0.5 | <0.1 | 9.2 | 89.9 | 80 | 51 |
KM6604 | |||||||
IC-2018-13 | 1.3 | 0.2 | <0.1 | 6.2 | 92.3 | 114 | 51 |
IC-2018-14 | 1.3 | <0.1 | <0.1 | 3.9 | 94.8 | 128 | 47 |
IC-2018-15 | 1.1 | <0.1 | <0.1 | 3.2 | 95.7 | 124 | 50 |
IC-2018-16 | 0.9 | <0.1 | <0.1 | 2.1 | 97.0 | 124 | 50 |
IC-2018-17 | 1.0 | <0.1 | <0.1 | 4.1 | 94.9 | 128 | 45 |
IC-2018-18 | 1.0 | <0.1 | <0.1 | 4.6 | 94.4 | 122 | 45 |
Note: | *Other copper minerals refer to bornite and chalcocite/covellite. |
Liberation of the copper sulphide minerals at the specified grind size were reported in a range of 53% to 65% (KM5248), 46% to 56% (KM5501), 40% to 52% (KM5806), and 45% to 51% (KM6004). Liberation of less than 50%, based on ALS Metallurgy, is not sufficient to efficiently recover copper minerals at the rougher flotation stage.
Metallurgical and Processing Tests
The Iron Cap deposit is porphyry copper mineralization associated with significant gold and silver contents, excluding a gold-only mineralization (Composite IC-2017-08) which was tested in the KM5501 test program. The metallurgical and processing test work are summarized in the following sections.
Seabridge Gold Inc. | 13-46 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Flotation Tests on Copper Sulphide Mineralization Samples
The test flowsheet used for the recent metallurgical tests on the copper sulphide mineralization samples is similar to the previous metallurgical tests. The flotation test work focused on the effect of the primary grind size on the copper and gold metallurgical performance. The initial open circuit batch flotation tests conducted in 2010 indicated that the upper Iron Cap mineralization was not sensitive to the primary grind sizes ranging from 80% passing 120 µm to 170 µm. However, the later test results show that a finer primary grind size would improve copper and gold recoveries. In addition, the recent KM6004 Iron Cap test work (2019) indicates that a lower rougher flotation pulp density (approximately 22% w/w) would improve the overall copper and gold metallurgical performance on some samples, compared to a “standard” slurry pulp density of approximately 35% to 40% w/w.
KM6004 in 2019 further tested the effect of the primary grind size on copper and gold flotation. The effect of slurry density on the target metal recovery was also investigated. The test results for copper and gold metallurgical performance are summarized in Figure 13.14 and Figure 13.15 respectively.
The test results indicate that a finer primary grind size would produce better copper and gold recoveries. The rougher flotation copper and gold recovery metallurgical performance was better in a diluted flotation slurry density (% solids) of approximately 22% w/w, compared to a standard rougher flotation slurry density of approximately 35%. This may be due to high amounts of mica and alteration products of potassium feldspar, such as sericite in some of the Iron Cap samples. These mineral components impact flotation pulp viscosities and modify froth cleaning abilities, thereby producing poor flotation separations and lower concentrate grades. The change to lower rougher flotation slurry densities resulted in a 30% to 40% reduction in rougher flotation weight.
Figure 13.14 Effect of Slurry Solid Density and Primary Grind Size – Rougher Flotation – Copper – KM6004
Source: ALS Metallurgy (2020). Preliminary Metallurgical Testing – Iron Cap Zones – Composites IC-2018-13 to IC-2018-18 – KSM Project (KM6004). January 8, 2020.
Seabridge Gold Inc. | 13-47 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 13.15 Effect of Slurry Solid Density and Primary Grind Size – Rougher Flotation – Gold – KM6004
Source: ALS Metallurgy (2020), Preliminary Metallurgical Testing – Iron Cap Zones – Composites IC-2018-13 to IC-2018-18 – KSM Project (KM6004), January 8, 2020.
It should be noted that Composite IC-2018-06 from the Mylonite zone, which was tested in 2018 (KM5806), shows significantly inferior metallurgical performance compared to the other samples. As indicated by Seabridge geological team, the sample represents a very small portion of the deposit (a geologically distinct unit located in the upper portion of the deposit as a veneer near the intersection of the Sulphurets and North Iron Cap faults). Therefore, no detailed testing, including process condition optimization testing, has been conducted on this sample.
Following the parameters established from the batch open circuit flotation metallurgical testing, more LCTs were carried out in all the additional testing programs (KM5248, KM5501, KM5806, and KM6604). Figure 13.16 shows the flowsheet used by these test programs.
Figure 13.16 LCT Flotation Flowsheet – Iron Cap (2017 – 2020 ALS)
Source: ALS, 2017-2020
Seabridge Gold Inc. | 13-48 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
The locked cycle flotation test results are summarized in Table 13.37. Two tests were repeated in test program KM5806 in order to improve the copper grade in the bulk concentrates. In the test program KM6004, the initial LCTs (KM6004-21 to KM6004-23) were conducted at a normal solid content of 35% w/w; while the remaining LCTs were performed approximately 22% by weight to improve the metallurgical performance. Some of the Iron Cap samples contained high amounts of mica and alteration products of potassium feldspar, such as sericite. These clay-related mineral components caused an increase in flotation pulp viscosity and a reduction in froth cleaning ability. In addition, a high solid density resulted in poor flotation separation efficiencies and lower concentrate grades. The change to lower rougher flotation slurry densities resulted in a 30% to 40% reduction in rougher flotation weight. The mass pull reduction is expected to reduce the amount of energy required for fine regrinding of rougher concentrates prior to the flotation cleaning stages.
Major observations of the results from the 21 LCTs are as follows:
● | the tested head samples contain varied contents of copper, gold, and silver, which range between 0.18% and 0.59% Cu, 0.20 g/t and 1.03 g/t Au, and 1 g/t and 6 g/t Ag, respectively |
● | on average, approximately 90% copper has been recovered to the bulk concentrate product grading at 24.7% Cu. Approximately, 62% gold and 55% silver have been recovered into the flotation concentrate |
● | the bulk cleaner scavenger tailing still contain significant gold and silver contents which, on average, represent 23% gold at a grade of 1.06 g/t Au and 21% silver at a grade of 4 g/t Ag. Additional cyanidation leaching tests have been conducted to further recover the contained gold and silver and are discussed in the following section |
● | on average, the gold-pyrite concentrate and copper first cleaner tailing contain approximately 4.2% gold at 0.43 g/t Au and 3.7% silver at 2 g/t Ag, respectively. Similarly, the metallurgical response of the product to cyanidation leaching is discussed in the following section. |
Seabridge Gold Inc. | 13-49 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Table 13.37 Flotation Locked Cycle Test Results – Iron Cap 2017 -2020 (KM5248/KM5501/KM5806/KM6004)
Test* | Sample |
Grind Size
(P80 µm**) |
Head Grade | Bulk Conc. Grade | Recovery | |||||||||
Cu
(%) |
Au
(g/t) |
Ag
(g/t) |
Mo
(%) |
Cu
(%) |
Au
(g/t) |
Ag
(g/t) |
Mo
(%) |
Cu
(%) |
Au
(%) |
Ag
(%) |
Mo
(%) |
|||
KM5248-10 | IC2016-02 | 87/13/13 | 0.37 | 0.45 | 6 | 0.006 | 24.0 | 20.9 | 245 | 0.300 | 86.9 | 63.1 | 59.8 | 66.6 |
KM5248-11 | IC2016-03/04 | 88/13/12 | 0.20 | 1.03 | 3 | 0.002 | 22.2 | 85.5 | 264 | 0.113 | 82.0 | 61.6 | 61.1 | 54.6 |
KM5501-16 | IC-MC-A | 123/19/18 | 0.32 | 0.68 | 3 | 0.002 | 22.9 | 34.4 | 151 | 0.094 | 88.3 | 62.3 | 67.3 | 56.5 |
KM5501-17 | IC-MC-B | 111/17/16 | 0.59 | 0.58 | 4 | 0.007 | 26.8 | 18.9 | 137 | 0.193 | 92.2 | 66.8 | 77.1 | 54.3 |
KM5501-19 | IC-MC-C | 116/16/17 | 0.43 | 0.64 | 3 | 0.004 | 27.0 | 28.5 | 156 | 0.132 | 90.0 | 64.2 | 68.2 | 43.6 |
KM5806-18 | IC-2018-01 | 100/22/19 | 0.18 | 0.20 | 1 | 0.006 | 21.6 | 13.9 | 86 | 0.590 | 88.4 | 51.8 | 42.4 | 74.2 |
KM5806-19 | IC-2018-02 | 95/16/14 | 0.35 | 0.33 | 2 | 0.003 | 23.1 | 14.0 | 60 | 0.125 | 90.8 | 59.1 | 52.4 | 60.5 |
KM5806-20 | IC-2018-03 | 108/20/17 | 0.42 | 0.69 | 2 | 0.003 | 23.9 | 28.3 | 67 | 0.105 | 92.0 | 67.1 | 59.7 | 63.5 |
KM5806-21 | IC-2018-04 | 100/15/14 | 0.27 | 0.35 | 1 | 0.005 | 25.5 | 26.5 | 67 | 0.386 | 92.1 | 74.8 | 50.1 | 83.2 |
KM5806-22 | IC-2018-05 | 108/19/21 | 0.50 | 0.75 | 2 | 0.002 | 25.2 | 27.0 | 64 | 0.074 | 92.4 | 65.7 | 48.7 | 55.5 |
KM5806-23 | IC-2018-02 | 95/17/16 | 0.35 | 0.31 | 2 | 0.003 | 23.9 | 13.2 | 66 | 0.135 | 90.3 | 56.3 | 51.9 | 60.0 |
KM5806-24 | IC-2018-03 | 108/19/22 | 0.43 | 0.69 | 2 | 0.002 | 25.1 | 28.8 | 68 | 0.107 | 90.7 | 64.7 | 61.5 | 76.2 |
KM6004-21 | IC-2018-13 | 90/16/16 | 0.46 | 0.46 | 5 | 0.005 | 22.7 | 11.4 | 150 | 0.19 | 92.7 | 46.8 | 57.1 | 70.2 |
KM6004-22 | IC-2018-14 | 93/19/16 | 0.40 | 0.63 | 3 | 0.003 | 19.2 | 21.7 | 72 | 0.12 | 91.0 | 65.5 | 47.2 | 69.8 |
KM6004-23 | IC-2018-15 | 94/17/16 | 0.32 | 0.51 | 2 | 0.003 | 24.4 | 26.4 | 75 | 0.16 | 93.6 | 64.0 | 58.2 | 63.6 |
KM6004-34 | IC-2018-14 | 93/18/20 | 0.40 | 0.64 | 2 | 0.004 | 24.3 | 27.6 | 84 | 0.14 | 90.3 | 63.4 | 52.6 | 57.8 |
KM6004-35 | IC-2018-16 | 89/15/16 | 0.027 | 0.70 | 2 | 0.002 | 26.2 | 52.5 | 116 | 0.03 | 90.5 | 70.6 | 50.9 | 20.0 |
KM6004-44 | IC-2018-17 | 86/18/20 | 0.36 | 0.45 | 2 | 0.002 | 28.4 | 23.0 | 90 | 0.070 | 91.9 | 59.2 | 52.4 | 37.8 |
KM6004-45 | IC-2018-18 | 89/16/17 | 0.35 | 0.53 | 2 | 0.003 | 27.6 | 26.1 | 109 | 0.127 | 91.3 | 57.4 | 56.5 | 59.0 |
KM6004-58 | IC-2018-14 | 152/16/16 | 0.40 | 0.60 | 3 | 0.004 | 27.6 | 29.7 | 102 | 0.16 | 86.7 | 63.0 | 50.8 | 50.4 |
KM6004-59 | IC-2018-15 | 152/16/16 | 0.32 | 0.46 | 2 | 0.003 | 28.5 | 30.8 | 85 | 0.12 | 88.0 | 65.9 | 47.5 | 37.4 |
Notes: | *Au grade in the Bulk Cleaner Tailings ranged from 0.53 to 1.80 g/t Au, averaging at 1.05 g/t Au; Au grade in the pyrite concentrate ranged from 0.05 to 0.80 g/t Au, averaging at 0.42 g/t Au. |
**Primary grind size/regrind size
Seabridge Gold Inc. | 13-50 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Gravity and Flotation Tests on Mylonite Samples
A series of gravity concentration and flotation tests has been carried out on the Mylonite sample (Composite IC-2017-08), whose sample was from the area close to the surface (out of the potential upper panel caves). It contained high gold and low copper (approximately 0.01% Cu) contents. The sample had significantly different mineralogical characteristics. The gold recovery flowsheet is shown in Figure 13.17, including gravity concentration by centrifugal concentration followed by panning. The tests have been carried out at two primary grind sizes: 80% passing 80 µm and 149 µm. The gold recoveries to the panned concentrates were 18.4% and 24.5%. The gold grades of the gravity concentrates were low, only at 87.4 g/t and 64.7 g/t Au. This may imply that most of the gold in the mineralization might have not occurred in coarse free gold forms. The subsequent flotation tests on the gravity tailing have been performed on the gravity tailing produced from the head sample with a grind size of 80% passing 149 µm. The test results show a poor metallurgical response to the flotation concentration.
Figure 13.17 Gold Recovery Flowsheet
Source: ALS, 2017
Leach Tests
Leaching Tests on Main Copper Sulphide Mineralization Samples
Cyanidation leach tests including DCN leaching and CIL tests have been conducted by ALS Metallurgy during 2017 and 2020. The bulk cleaner scavenger tailing and copper first cleaner tailings produced from the locked cycle testing programs of KM5248, KM5501, KM5806, and KM6004 have been tested.
Similar to the leaching conditions of the Deep Kerr leach test, the direct leaching procedure involves 16-hour pre-aeration and 24-hour cyanide leaching stages. Sodium cyanide was added to maintain an initial concentration of 1,000 ppm for test programs KM5248, KM5501, and KM5806, which was increased to 2,000 ppm in the latest test program KM6004. With the CIL tests, activated carbon was added after the first 6-hour leaching for the three earlier programs; in the test program KM6004, activated carbon was added following the pre-aeration stage.
Seabridge Gold Inc. | 13-51 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
All the cyanide leach test results are provided in Table 13.38. The following conclusions could be made based on the leach test results:
● | gold extractions from the bulk cleaner scavenger tailing were 35% to 70% with an average of 51%. On average, about 1.9 kg/t of sodium cyanide and 3.4 kg/t of lime were consumed in the leaching process |
● | gold extractions to the leach feed from the copper first cleaner tailing were 40% to 73% with an average of 53%. On average, about 1.6 kg/t of sodium cyanide and 2.6 kg/t of lime were consumed |
● | the average silver extraction rates were approximately 65% for the bulk cleaner scavenger tailing and 66% for the copper first cleaner tailing |
● | for the composite samples constructed from both the tailing products, gold extraction rates were slightly lower, ranging between 40 and 44% |
● | the CIL tests show that, on average, less than 80% of the gold extracted was adsorbed onto the activated carbon, ranging from 42% to 98%. The low gold adsorption onto the activated carbon might be due to significant copper dissolution in the leach treatment, which might have been caused the inferior gold adsorption onto the activated carbon. |
Table 13.38 Preliminary Cyanidation Test Results – Iron Cap (ALS 2017)
Test | Test Type |
Cyanide Consumption (g/t) |
Lime Consumption (g/t) |
Feed Grade, Calculated | Extraction | ||||
Au
(g/t) |
Ag
(g/t) |
Cu
(%) |
Au
(%) |
Ag (%)
|
Cu
(%) |
||||
Bulk Cleaner Scavenger Tailing Cyanidation | |||||||||
KM5248-12 | DCN | 2,800 | 3,900 | 0.91 | 11.45 | 0.17 | 70.3 | 57.2 | 55.8 |
KM5248-13 | DCN | 2,600 | 3,700 | 1.99 | 8.50 | 0.18 | 50.8 | 49.4 | 54.6 |
KM5501-21 | CIL | 1,900 | 3,000 | 1.43 | 4.78 | 0.07 | 51.9 | 60.3 | 21.9 |
KM5501-22 | CIL | 2,700 | 4,000 | 1.30 | 4.06 | 0.06 | 51.7 | 58.1 | 40.5 |
KM5501-23 | CIL | 2,300 | 4,100 | 1.45 | 4.22 | 0.08 | 57.9 | 66.8 | 37.3 |
KM5806-18 | DCN | 1,100 | 5,400 | 1.2 | 4.0 | 0.05 | 60.8 | 64.7 | 29.8 |
KM5806-19 | DCN | 900 | 4,900 | 1.1 | 3.5 | 0.06 | 48.6 | 62.9 | 25.2 |
KM5806-20 | DCN | 800 | 2,800 | 1.2 | 3.3 | 0.06 | 43.2 | 63.8 | 26.5 |
KM5806-21 | DCN | 1,100 | 3,100 | 0.9 | 2.3 | 0.06 | 63.3 | 65.7 | 34.3 |
KM5806-22 | DCN | 900 | 3,700 | 1.4 | 3.7 | 0.07 | 43.5 | 70.1 | 29.0 |
KM6004-36 | CIL | 2,000 | 3,600 | 1.17 | 5 | 0.07 | 34.6 | 57.0 | 40.1 |
KM6004-37 | CIL | 1,300 | 2,400 | 1.07 | 3 | 0.08 | 40.0 | 68.5 | 20.1 |
KM6004-39 | CIL | 2,500 | 2,700 | 1.29 | 4 | 0.11 | 45.1 | 73.2 | 39.5 |
KM6004-38 | CIL | 1,500 | 2,400 | 0.76 | 2 | 0.05 | 43.4 | 74.3 | 32.1 |
KM6004-52 | CIL | 2,500 | 2,300 | 1.21 | 3 | 0.08 | 54.5 | 65.7 | 43.2 |
KM6004-53 | CIL | 2,600 | 3,100 | 1.09 | 5 | 0.09 | 58.2 | 76.8 | 43.4 |
KM6004-54 | CIL | 3,100 | 3,200 | 1.03 | 4 | 0.09 | 42.0 | 70.6 | 49.1 |
table continues…
Seabridge Gold Inc. | 13-52 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Test | Test Type |
Cyanide Consumption (g/t) |
Lime Consumption (g/t) |
Feed Grade, Calculated | Extraction | ||||
Au
(g/t) |
Ag
(g/t) |
Cu
(%) |
Au
(%) |
Ag (%)
|
Cu
(%) |
||||
Copper First Cleaner Tailing Cyanidation (Au-Pyrite Concentrate) | |||||||||
KM5248-14 | DCN | 1,800 | 2,000 | 0.29 | 2.60 | 0.10 | 72.5 | 73.1 | 64.6 |
KM5248-15 | DCN | 1,700 | 2,200 | 0.73 | 3.28 | 0.08 | 53.2 | 60.3 | 68.3 |
KM5501-24 | CIL | 1,600 | 1,200 | 0.46 | 1.43 | 0.03 | 56.9 | 65.1 | 22.4 |
KM5501-25 | CIL | 2,300 | 1,300 | 0.48 | 1.18 | 0.05 | 57.0 | 74.6 | 45.3 |
KM5501-26 | CIL | 2,000 | 1,300 | 0.52 | 1.64 | 0.05 | 54.2 | 69.4 | 43.8 |
KM5806-18 | DCN | 1,200 | 4,800 | 0.87 | 3.0 | 0.04 | 63.8 | 63.6 | 33.6 |
KM5806-19 | DCN | 1,000 | 4,400 | 0.77 | 2.0 | 0.04 | 51.9 | 60.0 | 36.7 |
KM5806-20 | DCN | 1,000 | 4,600 | 0.84 | 2.1 | 0.04 | 49.9 | 62.5 | 39.9 |
KM5806-21 | DCN | 800 | 4,400 | 0.42 | 1.0 | 0.03 | 60.5 | 71.2 | 43.5 |
KM5806-22 | DCN | 1,100 | 3,700 | 0.82 | 2.3 | 0.04 | 40.0 | 60.7 | 37.6 |
KM6004-40 | CIL | 1,000 | 2,200 | 0.26 | 2 | 0.03 | 65.8 | 70.0 | 37.5 |
KM6004-41 | CIL | 900 | 2,200 | 0.32 | 2 | 0.02 | 51.3 | 44.4 | 38.5 |
KM6004-43 | CIL | 1,700 | 2,600 | 0.50 | 2 | 0.03 | 56.9 | 68.0 | 69.5 |
KM6004-42 | CIL | 1,100 | 2,200 | 0.38 | 2 | 0.04 | 45.7 | 75.3 | 30.6 |
KM6004-55 | CIL | 2,400 | 1,800 | 0.46 | 1 | 0.04 | 54.7 | 71.5 | 53.2 |
KM6004-56 | CIL | 2,100 | 2,100 | 0.54 | 2 | 0.05 | 54.4 | 66.4 | 40.9 |
KM6004-57 | CIL | 2,200 | 2,500 | 0.55 | 2 | 0.04 | 42.0 | 78.2 | 52.0 |
Combined Tailing Cyanidation (Selected Bulk Cleaner Scavenger Tailing+ Copper First Cleaner Tailing) | |||||||||
KM5501-32 | DCN | 1,200 | 2,300 | 0.98 | 4.0 | 0.06 | 40.0 | 62.7 | 37.4 |
KM6004-67 | CIL | 2,600 | 2,000 | 0.74 | 3 | 0.07 | 43.6 | 58.4 | 42.0 |
KM6004-68 | CIL | 1,900 | 2,000 | 0.72 | 3 | 0.07 | 40.4 | 56.4 | 39.8 |
Leaching Tests on Mylonite Samples
To recover the gold from the Mylonite samples (Composite IC-2017-08), both whole ore cyanidation and cyanidation on flotation concentrate treatments have been tested.
The whole ore cyanidation leach tests show that with a 24-hour cyanide leaching, less than 5% of the gold was extracted at the two cyanide concentrations of 1,000 ppm and 2,000 ppm. Roasting was then conducted on the leaching residues, followed by additional cyanide leaching. The overall gold extraction was improved to 75%. This indicates that a significant portion of gold in the composite sample was refractory.
The cyanidation leach tests on the rougher concentrates were conducted for 48 hours, after ultra fine regrinding treatment to a grind size of 80% passing 5 µm. Only 26% of the gold in the concentrate was extracted with very high cyanide and lime consumptions. The silver and copper extractions were higher: 57% Ag and 63% Cu. The test results further indicate the refectory gold cyanidation properties of the tested samples.
A diagnostic leach of the scavenger rougher tailing from the flotation test (KM5501-18) shows that only approximately 3% of the gold in the tailing samples was cyanide leachable and approximately 83% of the gold was associated with the hydrochloric and nitric acid soluble minerals.
13.5.3 | Flotation Concentrate Assay (2007–2020) |
The multi-element assay data are presented in Table 13.39 and Table 13.40 for the concentrates from various deposits. On average, the impurities in the copper-gold concentrates produced from the Mitchell, Sulphurets, Iron Cap, and Kerr deposits should not incur smelting penalties as set out by most smelters.
However, arsenic, antimony, and mercury contents in some of the concentrates from the Iron Cap deposit and the Kerr samples may incur smelting penalties. Also, the lead content of the concentrate from the Iron Cap Composite 1 may be higher than the penalty thresholds. Fluorine levels in some of the concentrates may be also higher than the penalty thresholds. It is anticipated that the mill feeds will be supplied from different deposits and mineralization zones. Impurity contents in the copper concentrates produced from these blended mill feeds should be lower than the penalty thresholds set by most of the smelters. Further review with respect to smelting penalties should be conducted.
Seabridge Gold Inc. | 13-53 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Table 13.39 Flotation Concentrate Assay from Different Deposit Samples
Element | Unit | Mitchell | Sulphurets | Kerr | Iron Cap | ||||||||
Min | Max | Avg | Min | Max | Avg | Min | Max | Avg | Min | Max | Avg | ||
Copper (Cu) | % | 22.0 | 28.0 | 25.0 | 26.0 | 29.3 | 27.9 | 21.0 | 30.7 | 25.6 | 21.7 | 27.0 | 24.4 |
Gold (Au) | g/t | 44.2 | 98.2 | 65.1 | 31.4 | 63.7 | 45.6 | 4.1 | 32.9 | 12.1 | 10.9 | 146.8 | 35.9 |
Silver (Ag) | g/t | 223 | 431 | 303 | 34 | 130 | 82 | 32 | 192 | 69 | 59 | 774 | 180 |
Molybdenum (Mo) | % | 0.12 | 0.72 | 0.35 | 0.17 | 0.70 | 0.37 | 0.01 | 0.27 | 0.11 | 0.07 | 0.59 | 0.20 |
Iron (Fe) | % | 26.8 | 32.7 | 30.0 | 27.2 | 29.6 | 28.7 | 23.7 | 32.3 | 29.3 | 25.4 | 30.0 | 28.0 |
Zinc (Zn) | % | 0.23 | 0.43 | 0.33 | 0.18 | 0.54 | 0.34 | 0.01 | 0.94 | 0.30 | 0.02 | 2.67 | 0.78 |
Arsenic (As) | ppm | 690 | 2,080 | 1,181 | 205 | 1,768 | 732 | 143 | 3,276 | 1,575 | 91 | 6,140 | 1,716 |
Selenium (Se) | ppm | 59 | 102 | 75 | 118 | 118 | 118 | 109 | 247 | 205 | 108 | 400 | 255 |
Antimony (Sb) | ppm | 210 | 1,182 | 647 | 370 | 2,100 | 972 | 24 | 2,710 | 801.8 | 22 | 4,500 | 1,653 |
Mercury (Hg) | ppm | 0.6 | 6.8 | 2.8 | 2.0 | 2.0 | 2.0 | 3.4 | 88.0 | 25.5 | <1 | 25.0 | 6.2 |
Lead (Pb) | % | 0.12 | 0.92 | 0.30 | 0.19 | 0.72 | 0.39 | 0.02 | 1.33 | 0.12 | 0.06 | 1.31 | 0.43 |
Bismuth (Bi) | ppm | <10 | 150.0 | 76.0 | <10 | <10 | <10 | 3.1 | 105.0 | 21.5 | 5.9 | 205.0 | 47.4 |
Fluoride (F) | ppm | 69 | 346 | 168 | 155 | 155 | 155 | 20 | 264 | 179 | 162 | 494 | 347 |
Sulphur (S) | % | 31.1 | 38.1 | 34.4 | 32.4 | 34.4 | 33.5 | 27.1 | 38.4 | 35.4 | 32.3 | 36.0 | 34.2 |
Chloride (Cl) | % | <0.01 | <0.01 | <0.01 | <0.01 | <0.01 | <0.01 | <0.01 | <0.01 | <0.01 | <0.01 | <0.01 | <0.01 |
Seabridge Gold Inc. | 13-54 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Table 13.40 Flotation Concentrate Assay from Blended Head Samples
Element | Unit |
Mitchell/
Sulphurets |
Mitchell/
Upper Kerr |
Mitchell/
Deep Kerr |
Mitchell/Iron Cap | ||
Min | Max | Avg | |||||
Copper (Cu) | % | 24.2 | 25.3 | 24.5 | 25.0 | 25.3 | 25.2 |
Gold (Au) | g/t | 52.0 | 40.0 | 28.3 | 40.0 | 54.3 | 47.2 |
Silver (Ag) | g/t | 178 | 168 | 150 | 168 | 332 | 250 |
Molybdenum (Mo) | % | 0.66 | 0.06 | 0.33 | 0.06 | 0.45 | 0.26 |
Iron (Fe) | % | 30.0 | 29.3 | 29.6 | 29.3 | 30.8 | 30.1 |
Zinc (Zn) | % | 0.92 | 0.42 | 0.24 | 0.4 | 0.7 | 0.6 |
Arsenic (As) | ppm | 969 | 1,369 | 1,404 | 1,369 | 1,970 | 1,670 |
Selenium (Se) | ppm | 89 | 76 | - | 76 | 76 | 76 |
Antimony (Sb) | ppm | 500 | 492 | 814 | 492 | 2,116 | 1,304 |
Mercury (Hg) | ppm | 1.0 | 2.4 | 23.0 | 2.4 | 7.0 | 4.7 |
Lead (Pb) | % | 0.26 | 0.15 | 0.12 | 0.2 | 0.5 | 0.3 |
Bismuth (Bi) | ppm | <10 | 121.0 | 12.2 | 39.7 | 121.0 | 80.4 |
Fluoride (F) | ppm | 174 | 116 | 264 | 116 | 265 | 191 |
Sulphur (S) | % | 34.9 | 35.0 | 34.6 | 35.0 | 35.5 | 35.3 |
Chloride (Cl) | % | <0.01 | - | <0.01 | - | - | - |
ALS Environmental has conducted additional selenium testing on Iron Cap samples for selenium deportment and distributions on the flotation products, as well as for the effects of cyanidation of selenium extraction. The selenium analysis results are summarized as follows:
● | about 21% selenium was present in the bulk concentrate at a grade of 114 g/t Se; very little selenium (<1 ppm) was dissolved into the process water of the rougher and cleaner tailings |
● | a low percentage (about 3%) of selenium in the leach feed was extracted during the cyanidation leach. During the destruction of the cyanide, the residual selenium concentration was 0.186 mg/L as compared with 0.221 g/t Se in the non-treated cyanide leaching residue. The selenium content can be effectively removed by using reverse osmosis (RO) methods. |
13.5.4 | Ancillary Tests |
During test programs, various environment-related tests have been conducted to determine engineering-related parameters. The key tests are as follows:
● | leach residue cyanide destruction, including sulphur dioxide/air, Caro’s acid (H2SO5), and hydrogen peroxide (H2O2) |
● | cyanide recovery from barren solutions, including acidification, volatilization of hydrogen cyanide gas, and re-neutralization (AVR); and sulphidization, acidification, recycling, and thickening of precipitate (SART) |
Seabridge Gold Inc. | 13-55 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
● | static and dynamic thickening tests for conventional thickener sizing and for high rate thickener sizing for primary grinding product, first cleaner tailing together with gold-bearing pyrite concentrate, cyanidation residues, and rougher/scavenger flotation tailing |
● | filtration testing, including vacuum filtration and pressure filtration for bulk flotation concentrate. |
Cyanide Recovery Tests & Cyanide Destruction Tests – 2009/2010 (SGS)
A large-scale, agitated bulk cyanide leach test was conducted by SGS on a 20 kg combined sample of first cleaner tailing and pyrite rougher concentrate. The sample was sourced from material generated from the flotation pilot plant testing at G&T.
The key chemical analysis of the solution for cyanide recovery and the washed leach pulp for the cyanide destruction are shown in Table 13.41.
Table 13.41 Chemical Analysis of Cyanide Recovery Test Solution and Cyanide Destruction Pulp
Sample |
CNT
(mg/L) |
CNWAD
(mg/L) |
CNF
(mg/L) |
Cu
(mg/L) |
Fe
(mg/L) |
CNS
(mg/L) |
Leach Solution | 853 | 850 | 280 | 562 | 1.6 | 700 |
Washed Pulp | 94 | 90 | - | 90.4 | 1.08 | 220 |
Note: CNT—total cyanide; CNWAD—weak acid dissociable cyanide; CNF—free cyanide; CNS—thiocyanate
Exploratory AVR tests were conducted to investigate the effect of pH on the recovery of cyanide from the barren leach solution. The scrubbing retention time was 4 hours. The collected cyanide, acid consumption, and lime consumption are summarized in Table 13.42.
Table 13.42 Cyanide Recovery Test Results – AVR
pH |
Recovered
CNWAD (%) |
Sulphuric Acid
Addition (g/L) |
Hydrated Lime
Addition (g/L) |
2 | 77 | 3.18 | 0.78 |
3 | 72 | 2.01 | 0.24 |
4 | 35 | 1.14 | 0.16 |
Exploratory SART tests were also conducted on the barren leach solution to investigate the effects of pH and sodium hydrosulphide (NaHS) dosage on recovering cyanide and copper from CNWAD and copper cyanide complexes. The test results are as follows:
● | at a sodium hydrosulphide dosage of 100% stoichiometric requirement, 83% to 94% of the copper was precipitated when reducing the pH level from 5 to 3 |
● | at pH 3, an increase of sodium hydrosulphide dosage to 120% of the stoichiometric requirement resulted in near complete removal of copper from the solution and regeneration of all the weak acid dissociable cyanide as free cyanide |
● | the sulphuric acid addition was approximately 1.9 g/L of feed solution, and the hydrated lime requirement for re-neutralization of the SART-treated solution was 1.3 g/L of feed solution. |
Further optimization of the SART conditions could improve these results, if SART was considered for recovery of cyanide into low-concentration cyanide solutions. These SART-generated cyanide solutions might also be considered for feed to further AVR processing to generate higher grade cyanide solutions for recycle to the leaching circuits.
Cyanide Destruction Tests – 2009/2010 (SGS)
Three different cyanide destruction methods — sulphur dioxide/air, Caro’s acid, and hydrogen peroxide — were tested for oxidation of cyanide and detoxification of the washed pulp. The objective of the test work was to produce treated effluent containing less than 2 mg/L CNWAD. The results of the cyanide destruction test results are summarized in Table 13.43.
Seabridge Gold Inc. | 13-56 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Table 13.43 Cyanide Destruction Test Results – 2009/2010 (SGS)
Test | Method |
Oxidant
Dosage Stoich (%) |
Cumulative
Retention Time (~h) |
Composition (Solution Phase) | Cumulative Reagent Addition* (g/g CNWAD) | |||||||
pH |
CNT
mg/L |
CNWAD
mg/L |
SO2
Equivalent |
Lime | Cu |
H2SO5
100% |
H2O2
100% |
Cu mg/L
Solution |
||||
Cyanidation Washed Pulp | 10.7 | 94 | 90 | - | - | - | - | - | - | |||
CND 6&7 | SO2/Air | 160-200 | 1 | 9.6 | 2-4 | <1 | 4-5 | - | 0.14 | - | - | 12 |
C-1 | Caro’s Acid | 500 | 1.5** | 9.0 | 2.8 | 1.7 | - | 37 | - | 21.9 | - | - |
H-1 | H2O2 | 500 | 1.5** | 10.1 | 12 | 11 | - | - | - | - | 6.5 | - |
SO2/Air Partially Treated Pulp | 10.0 | 10 | 10 | - | - | - | - | - | ||||
C-2 | Caro’s Acid | 500 | 1.5** | 9.0 | 2.8 | 1.7 | - | - | - | 21.6 | - | - |
H-7 | H2O2 | 1,000 | 0.5 | 10.0 | 2.3 | 0.3 | - | - | 1.5 | - | 13 | 15 |
SO2/Air Partially Treated Solution | 10.0 | 10 | 10 | - | - | - | - | - | - | |||
H-4 | H2O2 | 500 | 1 | 8.7 | 1.6 | 0.4 | - | - | - | - | 6.5 | - |
Notes: | *Copper was added as CuSO4 5H2O; SO2 was added as Na2S2O5 |
**Reagent was added in three 30-min stages
Seabridge Gold Inc. | 13-57 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
The results indicated that the residual CNWAD in the washed pulp was reduced to less than 1 mg/L after the pulp had been treated with 4 g to 5 g equivalent sulphur dioxide and 0.14 g copper (added as copper sulphate) per gram of CNWAD in the pulp. The reaction time for this process was one hour at the natural pH. The sulphur dioxide/air-treated pulp contained small amounts of CNT in the form of ferrocyanide complex.
An exploratory test indicated that the residual CNWAD in the solution phase of the washed pulp was reduced to less than 2 mg/L level by using Caro’s acid treatment. The reagent consumption was 0.74 g/L H2SO5 (250% of the stoichiometric amount) and 0.6 g/L hydrated lime of the feed to the cyanide destruction.
The tests also indicated that the hydrogen peroxide process is not very efficient for cyanide destruction. The residue CNWAD was only reduced from 90 mg/L to 11 mg/L after adding 500% of the stoichiometrically required hydrogen peroxide.
Two-stage cyanide destruction involving sulphur dioxide/air treatment followed by a polishing treatment with Caro’s acid or hydrogen peroxide was investigated on the pulp and also on a tailing filtrate solution. The sulphur dioxide/air-treated pulp was adjusted with sodium cyanide to 10 mg/L CNWAD for the polishing tests. The results are as follows:
● | the polishing test using Caro’s acid was unsuccessful. The final product still contained 3.2 mg/CNWAD after adding 500% of the stoichiometric Caro’s acid |
● | the hydrogen peroxide polishing treatment produced less than 2 mg/L residual CNWAD. The hydrogen peroxide dosage was 10 times of the stoichiometric requirement and the copper addition was 0.011 g/L pulp |
● | the solution phase (filtrate) of the sulphur dioxide/air partially treated pulp responded well to the hydrogen peroxide polishing treatment. The solution contained less than 1 mg/L residual CNWAD after being treated with five times the stoichiometric hydrogen peroxide requirement (0.065 g/L solution). Copper sulphate was not used in the treatment of this solution. |
Cyanide Recovery Tests & Cyanide Destruction Tests – 2017 (BQE Water)
Six leaching residue samples from the test program KM5367 on the Mitchell zone have been tested for cyanide destruction and copper removal using sulphur dioxide/air method. The copper removal was completed after the cyanide destruction to achieve the effluent copper concentration target of 0.5 mg/L.
The results confirmed that the cyanide destruction was successful by reducing the WAD cyanide concentration in the effluent to a level between 0.005 mg/L and 0.075 mg/L, as compared with the target limit of 0.5 ppm CNWAD.
Settling Tests
Preliminary settling tests were conducted on pyrite rougher flotation tailing in the 2008 testing program. As reported by G&T, the tests on the tailing slurry failed to generate normal settling curves. The tests were subsequently carried out on the re-pulped sample from dried tailing.
Seabridge Gold Inc. | 13-58 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
The test data reveal that the settling area required for pyrite rougher flotation tailing was 0.73 m2/t/d without adding flocculant and 0.30 m2/t/d with the addition of 10 g/t of flocculant.
In 2009, Pocock conducted solids liquid separation (SLS) tests on five flotation products generated by G&T from the bench scale tests and pilot plant tests. The materials tested included flotation feed, copper concentrate, first cleaner tails and gold-bearing pyrite concentrate, cyanidation residues, and rougher/scavenger flotation tailing. The dewatering tests included:
● | flocculant screening tests |
● | static and dynamic thickening tests for conventional thickener sizing and for high rate thickener sizing |
● | viscosity (rheological properties) tests for rake mechanism and underflow pipeline sizing |
● | vacuum filtration tests |
● | pressure filtration tests. |
Hychem AF 303 (a medium to high molecular weight, 7% charge density, anionic polyacrylamide) was selected for thickening tests from preliminary screening of a series of flocculants.
The key test results are summarized in Table 13.44 and Table 13.45.
Table 13.44 Recommended Conventional Thickener Operating Parameters – 2009 (Pocock)
Tested Material |
Feed
(% Solids) |
Flocculant
(g/t) |
Underflow
(% Solids) |
Unit Area
(m2/t/d) |
Flotation Feed Composite | 20-25 | 10-15 | 60-65 | 0.125 |
Coarse Grind Flotation Feed | 25-30 | 10-15 | 70-74 | 0.125 |
Final Copper Concentrate | 25-30 | 5-10 | 70-72 | 0.125 |
Rougher Tailing | 15-20 | 10-15 | 60-62 | 0.125 |
Au-Pyrite Concentrate and Cu Cleaner Tailing | 15-20 | 20-25 | 55-58 | 0.275-0.307 |
Cyanide Leach Reside | 10-15 | 20-25 | 50-53 | 0.284-0.312 |
Notes: |
–All tests were performed at 20°C
and as received pH.
–Hydraulic loading or rise rate (m3/m2/h) includes a 0.5 scale-up factor. –Unit area includes a 1.25 scale-up factor; the range of unit areas provided corresponds to the range of underflow densities. –Coarse grind flotation feed: at a particle size of P80 170 µm; simulating stage one primary grind size. |
Table 13.45 Recommended High Rate Thickener Operating Parameters – 2009 (Pocock)
Tested Material |
Feed
(% Solids) |
Flocculant
(g/t) |
Underflow
(% Solids) |
Net Feed Loading
(m3/m2h) |
Flotation Feed Composite | 15-20 | 15-20 | 60-65 | 4.8-6.1 |
Coarse Grind Flotation Feed | 20-25 | 10-15 | 70-74 | 4.8-6.1 |
Rougher Flotation Tailing | 15-20 | ~20 | 57-62 | 3.7-4.8 |
Seabridge Gold Inc. | 13-59 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Filtration Tests
The 2009 Pocock testing program also determined the filtration rates of the copper concentrates produced from G&T pilot plant tests. Both vacuum filtration and pressure filtration methods were tested. The test results are summarized in Table 13.46.
Table 13.46 Filtration Test Results – 2009 (Pocock)
Filtration
Method |
Bulk Cake
Density (dry kg/m3) |
Cake
Thickness (mm) |
Cake
Moisture (%) |
Filtration
Rate (dry kg/m2h) |
Dry Cake
Weight (dry kg/m2) |
Vacuum | 1,785 | 15 | 19 | 265* | - |
Pressure | 2,511 | 51 | 8 | - | 117.8** |
Notes: *Includes scale-up
factors at vacuum of 67.7 kPa.
**Feed pressure 552 kPa at 51 mm thickness.
Magnetic Separation Tests
In the 2008 test program, Davis Tube magnetic separation was used in an effort to recover the metal contents lost in the coarser than 74 µm fraction of the pyrite flotation tailing from Tests 10, 11, and 25. Test results indicate that less than 3% of the coarse tailing weight was recovered into a magnetic fraction assaying approximately 23% iron. No copper or gold assay data was reported.
13.6 | Conclusions |
Extensive metallurgical testing programs were conducted on the samples representing the four deposits of the Property in 1989-1991 and 2007-2020.
The substantial test results indicate that the mineral samples from the four separate deposits are amenable to conventional flotation. In general, the Mitchell, Sulphurets, and parts of the Kerr and Iron Cap mineralization responds well to additional gold and silver recovery from the gold-bearing sulphide products by cyanidation. However, the test results show that the gold-bearing sulphide products (first cleaner scavenger tailing and pyrite concentrate) from the Deep Kerr and lower Iron Cap zones did not seem to respond well to gold recovery by using the tested cyanide leaching treatment. Further test work is required to optimize the process conditions, or alternative treatment methods should be used for the gold and silver recovery. The flotation and cyanidation combined process consists of:
● | copper-gold-molybdenum bulk rougher flotation followed by gold-bearing pyrite flotation |
● | regrinding of the resulting bulk rougher concentrate followed by three stages of cleaner flotation to produce a copper-gold-molybdenum bulk cleaner flotation concentrate |
● | molybdenum separation of the bulk cleaner flotation concentrate to produce a molybdenum concentrate and a copper/gold concentrate containing associated silver, if the molybdenum grade is sufficiently high |
Seabridge Gold Inc. | 13-60 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
● | cyanide leaching of the gold-bearing pyrite flotation concentrate and the scavenger cleaner tailing to further recover gold and silver values as doré, mainly for Mitchell and Sulphurets mineralization and parts of Iron Cap and Kerr mineralization. |
The testing programs from 2017 to 2020 show the following:
● | a finer primary grind size can improve the copper and gold metallurgical performance, especially for copper |
● | rougher flotation at a low slurry solid density can improve copper and gold metallurgical performance, especially for the mineralization with more clay-type minerals |
● | the test results suggest that the gold-bearing sulphide products (first cleaner scavenger tailing and pyrite concentrate) from the Deep Kerr and lower Iron Cap zones did not seem to respond well to the gold recovery by the established cyanide leaching treatment. |
On average, the impurities in the copper-gold concentrates produced from the Mitchell, Sulphurets, and Kerr deposits should not incur smelting penalties as set out by most smelters.
However, arsenic, antimony, and mercury contents in some of the concentrates from the Iron Cap deposit and the Kerr samples may incur smelting penalties. It is anticipated that the mill will be supplied with blended feeds from different deposits. Impurity contents in the copper concentrates produced from these blended mill feeds should be lower than the penalty thresholds set by most of the smelters. Further review with respect to smelting penalties should be conducted.
The samples from all the deposits are moderately hard for ball mill and SAG mill grinding, excluding the samples from the Sulphurets deposit, which show much resistance to both ball mill and SAG mill grinding. Also the samples tested are amenable to particle size reduction by HPGR procedure.
13.7 | Metallurgical Performance Projection |
The metallurgical test results obtained from the various test programs were used to predict the plant metallurgical performance parameters for copper, gold, silver, and molybdenum. Gold and silver recoveries are based on the combined process of flotation to produce a salable concentrate, followed by cyanidation of combined cleaner tailings and pyrite flotation concentrate. The flotation process will produce a copper concentrate containing approximately 25% copper with variable precious metal contents and a molybdenum concentrate with 50% molybdenum. The gold cyanidation process applied to gold-bearing pyrite products will produce gold-silver doré. This process further recovers gold and silver from the mineralization, in addition to the gold and silver recovered by the flotation process.
Seabridge Gold Inc. | 13-61 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
The LCT results from the various test programs were used to project flotation metallurgical performance. All of the metal recoveries to the concentrates from the LCTs were adjusted to the target copper grade of the final concentrate. The gold and silver recoveries to the final doré were estimated based on the cyanidation test results including metal losses, which were expected to occur during downstream acid washing, desorption and smelting processing in industrial operation. Due to some variations in metallurgical responses among the mineralized deposits, the projections for their metallurgical performance were on deposit basis.
13.7.1 | Metallurgical Performance Projection – Mitchell, Sulphurets, Upper Kerr, and Upper Iron Cap |
The results show that the Mitchell mineralization produced better metallurgical performance, compared to the Sulphurets, Kerr, and Iron Cap mineralization. The metallurgical performance projections of the different types of KSM mineralization are summarized in Table 13.47 to Table 13.50. The estimates are based on a primary grind size of 80% passing approximately 125 µm to 150 µm and a regrind size of 80% passing approximately 20 µm.
Table 13.47 Cu-Au Flotation Concentrate Grade Versus Cu Head Grade
Cu Head Grade
(%) |
Cu Concentrate Grade
(%) |
>0.80 | 28 |
0.40-0.80 | 26 |
0.15-0.40 | 25 |
0.10-0.15 | 23 |
0.05-0.10 | 17 |
<0.05 | 5 |
Seabridge Gold Inc. | 13-62 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Table 13.48 Cu-Au Flotation Concentrate – Metal Recovery Projections
Deposit | Description | Head Grade | Recovery |
Mitchell | Copper Recovery | >1.0% Cu | = 95% |
0.8 – 1.0% Cu | = 92% | ||
0.234 – 0.8% Cu | = 90.86 x (Cu Head, %) 0.027 | ||
0.05 – 0.234% Cu | = 18.02 x ln(Cu Head, %) + 113.5 | ||
0.02 – 0.05% Cu | = 20% | ||
<0.02% | = 3% | ||
Gold Recovery | n/a | = 0.0967 x (Cu Recovery, %) 1.4465 | |
Silver Recovery | n/a | = 1.427 x (Cu Recovery, %) – 70.11 | |
Sulphurets | Copper Recovery | >1.0% Cu | = 93% |
0.8 – 1.0% Cu | = 90% | ||
0.234 – 0.8% Cu | = 90.86 x (Cu Head, %) 0.027 – 3.5 | ||
0.05 – 0.234% Cu | = 18.02 x ln(Cu Head, %) + 110 | ||
0.02 – 0.05% Cu | = 20% | ||
<0.02% | = 3% | ||
Gold Recovery | n/a | = 52.07 x ln(Cu Recovery, %) – 174.1 | |
Silver Recovery | n/a | = 1.065 x (Cu Recovery, %) – 44.80; if copper recovery < 50%, use 5% | |
Kerr | Copper Recovery | >1.0% Cu | = 88% |
0.8 – 1.0% Cu | = 85% | ||
0.234 – 0.8% Cu | = 90.86 x (Cu Head, %) 0.027 – 7 | ||
0.05 – 0.234% Cu | = 18.02 x ln(Cu Head, %) + 106.5 | ||
0.02 – 0.05% Cu | = 20% | ||
<0.02% Cu | = 3% | ||
Gold Recovery | n/a | = 171.8 x ln(Cu Recovery, %) – 718; if copper recovery < 70%, use 5% | |
Silver Recovery | n/a | = 132.48 x ln(Cu Recovery, %) - 542.9; if copper recovery < 70%, use 5% | |
Iron Cap | Copper Recovery | >1.0% Cu | = 95% |
0.8 - 1.0% Cu | = 92% | ||
0.49 - 0.8% Cu | = 90% | ||
0.10 - 0.49% Cu | = 90.786 x (Cu Head, %) 0.089 | ||
0.05 - 0.10% Cu | = 30% | ||
<0.05% Cu | = 3% | ||
Gold Recovery | >2.0 g/t Au | = 80% | |
0.75 – 2.0 g/t Au | = 72.5% | ||
0.05 – 0.75 g/t Au | = 78.128 x (Au Head, g/t) 0.3012 | ||
<0.05 g/t Au | = 20 | ||
Silver Recovery | >20 g/t Ag | = 83% | |
10 – 20 g/t Ag | = 78% | ||
0.5 – 10 g/t Ag | = 39.945 x (Ag Head, g/t) 0.2602 | ||
<0.5 g/t Ag | = 5% |
Seabridge Gold Inc. | 13-63 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Table 13.49 Au-Ag Doré – Cyanide Leach Metal Recovery Projections
Deposit | Head Grade | Recovery |
Mitchell | Gold | |
>10 g/t Au | = (98 – ( 0.096 x (Cu Recovery, %) 1.446)) x 80% x 98% | |
5 – 10 g/t Au | = (95 – ( 0.096 x (Cu Recovery, %) 1.446)) x 75% x 98% | |
0.1 – 5 g/t Au | = (87.491 x (Au Head, g/t)0.051 – ( 0.096 x (Cu Recovery, %) 1.446)) x 66% x 98% | |
<0.1 g/t Au | = 0% | |
Silver | ||
>15 g/t Ag | = 88 – (1.427 x (Cu Recovery, %) – 70.11) | |
8- 15 g/t Ag | = 86 – (1.427 x (Cu Recovery, %) - 70.11) | |
1 - 8 g/t Ag | = (42.74 x (Ag Head, g/t) 0.336 ) - ( 1.427 x (Cu Recovery, %) - 70.11) ; if <0, use 0% | |
<1 g/t Ag | = 0% | |
Sulphurets | Gold | |
>10 g/t Au | = (98 – (52.07 x ln(Cu Recovery, %) – 174.1)) x 70% x 98% | |
5 - 10 g/t Au | = (95 – ( 52.07 x ln(Cu Recovery, %) – 174.1)) x 60% x 98% | |
0.1 - 5 g/t Au | = ((87.491 x (Au Head, g/t)0.051 +3)- (52.07 x ln(Cu Recovery, %) - 174.1)) x 49% x 98% | |
<0.1 g/t Au | = 0% | |
Silver | ||
>15 g/t Ag | = 52.7% | |
8- 15 g/t Ag | = 50.7% | |
1 – 8 g/t Ag | = (42.74 x (Ag Head, g/t) 0.336) - (1.065 x (Cu Recovery, %) - 44.80); if <0, use 0% | |
<1 g/t Ag | = 0% | |
Kerr | Gold | |
>10 g/t Au | = (98 – (171.8 x ln(Cu Recovery, %) – 718)) x 75% x 98% | |
5 - 10 g/t Au | = (95 – (171.8 x ln(Cu Recovery, %) – 718)) x 65% x 98% | |
0.1 - 5 g/t Au | = ((87.491 x (Au Head, g/t)0.051 + 8)- (171.8 x ln(Cu Recovery, %) - 718))) x 57% x 98% | |
<0.1 g/t Au | = 0% | |
Silver | ||
>15 g/t Ag | = (88 – (132.48 x ln(Cu Recovery, %) – 542.9))/100; Cap at 88% | |
8- 15 g/t Ag | = (86 – (132.48 x ln(Cu Recovery, %) – 542.9))/100; Cap at 86% | |
1 - 8 g/t Ag | = (21.59 x ln(Ag Head, g/t) + 40.14) - (132.48 x ln(Cu Recovery, %) - 542.9) ; if <0, use 0% | |
<1 g/t Ag | = 0% | |
Iron Cap | Gold | |
>2 g/t Au | = 8% | |
0.05 - 2 g/t Au | = 10% | |
<0.05 g/t Au | = 5% | |
Silver | ||
>20 g/t Ag | = 8% | |
10 – 20 g/t Ag | = 11% | |
0.5 – 10 g/t Ag | = 16% | |
<0.5 g/t Ag | = 5% |
Note: the doré recoveries are in addition to flotation gold and silver recoveries.
Seabridge Gold Inc. | 13-64 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Table 13.50 Mo Flotation Concentrate Metal Recovery and Grade (Molybdenum Concentrate Grade = 50%)
Mo Head Grade
(%) |
Mo Recovery
(%) |
>0.010 | 47 |
0.005-0.010 | 35 |
0.0025-0.005 | 25 |
<0.0025 | 0 |
13.7.2 | Metallurgical Performance Projection – Deep Kerr and Lower Iron Cap |
After 2016, further metallurgical test work has been conducted, mainly on the mineral samples generated from the Deep Kerr and Iron Cap zones. According to the data obtained from the test programs, the copper, gold, and silver recovery performance projections for the lower zones of the Kerr and Iron Cap deposits have been updated and are summarized in Table 13.51, Table 13.52 and Table 13.53.
The similar copper grade for the copper-gold concentrate is assumed for the lower zone mineralization, compared to the other mineralization shown in Table 13.47.
The average primary grind size used for the metallurgical performances for both the lower Iron Cap and the Deep Kerr lower mineralization is 80% passing approximately 125 µm. For the lower Iron Cap zone mineralization, a diluted slurry solid density of approximately 25% is also considered in the metallurgical performance projections.
Table 13.51 Cu-Au Flotation Concentrate –Metal Recovery Projections
Deposit | Description | Head Grade | Recovery |
Deep Kerr | Copper Recovery | > 1.5% Cu | = 96.5 |
0.455 – 1.5% Cu | = 5.5138 x ln (Cu Head, %) + 93.548 | ||
0.20 – 0.455% Cu | = 95.434 x (Cu Head, %) 0.0856 | ||
0.10 – 0.20% Cu | = 78 | ||
< 0.10% Cu | = 30 | ||
Gold Recovery | n/a | = 0.9812 x (Copper Recovery, %) – 26.327 | |
Silver Recovery | n/a | = 0.9773 x (Copper Recovery, %) – 33.149; If silver recovery < 0, use 0 | |
Lower Iron Cap | Copper Recovery | > 1.0% Cu | = 95 |
0.5 – 1.0% Cu | = 93 | ||
0.2 – 0.5% Cu | = 97.915 x (Cu Head, %) 0.0849 | ||
0.1 - 0.2% Cu | = 106.39 x (Cu Head, %) 0.1371 | ||
0.05 - 0.1% Cu | = 30 | ||
< 0.05% Cu | = 3 | ||
Gold Recovery | > 2.0 g/t Au | = 73 | |
0.8 – 2.0 g/t Au | = 70 | ||
0.15 – 0.8 g/t Au | = 64.543 x (Au Head, g/t) 0.021 | ||
< 0.15 g/t Au | = 40 | ||
Silver Recovery | >20 g/t Ag | = 80 | |
11 – 20 g/t Ag | = 78 | ||
0.5 – 11 g/t Ag | = 46.094 x (Ag Head, %)0.206 | ||
<0.5 g/t Ag | = 20 |
Seabridge Gold Inc. | 13-65 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Table 13.52 Au-Ag Doré – Cyanide Leach Metal Recovery Projections
Notes: | 1) The doré recoveries are in addition to flotation gold and silver recoveries. |
2) Gold and silver recoveries to doré from the flotation products of the first cleaner flotation tailings and the pyrite concentrate are projected based on test work in which the cyanide leaching conditions were not optimized. Whether it is economic to run the cyanide leach circuit on the gold-bearing flotation tailings to recover the additional gold and silver depends on leach circuit feed grades, metal prices, and operating costs. Further test work is recommended to improve metallurgical performances and reduce reagent consumption.
The molybdenum metallurgical performance projection is same as shown in Table 13.53 for the lower Iron Cap mineralization; the molybdenum metallurgical performance for the Deep Kerr mineralization is summarized in Table 13.53.
Table 13.53 Mo Flotation Concentrate Metal Recovery and Grade (Molybdenum Concentrate Grade = 50%)
Mo Head
(%) |
Mo Recovery
(%) |
> 0.010; Mo/Cu > 0.006 | = 45 |
0.0050-0.010; Mo/Cu > 0.006 | = 35 |
0.0025-0.0050; Mo/Cu > 0.006 | = 25 |
<0.0025 | = 0 |
Seabridge Gold Inc. | 13-66 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
14.0 | Mineral Resource Estimates |
Mineral Resources were estimated for the KSM Property by Mr. Michael J. Lechner, President of Resource Modeling Inc. (RMI). Mr. Lechner is a P.Geo. (Province of British Columbia), a Registered Professional Geologist in the State of Arizona, a Certified Professional Geologist with the American Institute of Professional Geologists (AIPG), and a registered member of the Society for Mining, Metallurgy, and Exploration (SME). These professional registrations together with Mr. Lechner’s education, professional background and work experience allow him to be the QP for the sections of this report that he is responsible for preparing, as per the requirements set out by NI 43-101. Neither Mr. Lechner nor RMI have any vested interest in Seabridge securities or the Property that is the subject of this Technical Report. Mr. Lechner and RMI have worked as an independent consultant for Seabridge since 2001.
The Qualified Person responsible for Mineral Resources has prepared a number of previous filed NI 43-101 Technical Reports regarding Mineral Resource estimates of the various deposits within the KSM property (Lechner, 2007, Lechner, 2008a, Lechner, 2008b, Lechner, 2009, Lechner, 2010, Lechner, 2011, and Lechner, 2014). In addition, Mineral Resource estimates were prepared by the Qualified Person responsible for resources in the 2012 and 2016 PFS Technical Reports (Tetra Tech, 2012, and Tetra Tech, 2016).
Previously, the four mineralized zones were modeled within a single block model using 25m x 25m x 15m blocks. As more understanding was gained after each annual drilling campaign, individual block models were created for each area. Grade interpolation parameters have also evolved over time, reflecting changes required for modeling deeper mineralization intersected below the Kerr and Iron Cap deposits. Table 14.1 compares and contrasts some of the basic modeling parameters associated with the four KSM resource areas.
Table 14.1 Summary of KSM Block Model Parameters by Deposit
Seabridge Gold Inc. | 14-1 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
A variety of basic descriptive statistics and spatial analyses were completed for each area upon the completion of annual drilling campaigns. These investigations include the generation of grade distribution tables, grade histograms, cumulative probability plots, grade box plots, grade contact plots, down-hole variograms, and directional variograms. In addition, new drill hole results were typically compared against the previous grade model to assess model performance.
The following sections summarize the key assumptions, parameters and methods that were used to estimate resources for each of the four mineralized areas for which Mineral Resources have been established.
14.1 | Kerr Deposit |
The Kerr resource estimate was last updated using drilling data that had been collected through 2016. The block model was informed by 223 diamond core holes totaling about 84,770 m of assayed drilling data. Approximately 75% of that drill data was collected by Seabridge. Placer Dome drilled over 80 relatively shallow holes in 1992 while exploring for an open pit copper-gold deposit.
14.1.1 | Grade Distribution – Kerr Deposit |
The distribution of gold and copper grades within the Kerr deposit were compared with logged lithology and alteration to determine if those attributes could be used for grade estimation purposes. Grade was often seen to cross-cut various lithologic and/or alteration boundaries. For that reason, grade wireframes were designed to constrain the estimate of block grades. Five gold grade wireframes and six copper wireframes were designed by Seabridge’s geologic staff.
The distribution of gold based on uncapped, uncomposited assay data is summarized at four different cutoff grades by five gold grade wireframes. The data in Table 14.2 shows an average gold grade of 0.21 g/t for all data and a coefficient of variance of 3.1. Table 14.3 summarizes uncapped copper assay statistics for six copper grade wireframes. The average copper grade for all data is seen to be 0.24% with a coefficient of variance of 1.4.
Seabridge Gold Inc. | 14-2 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Table 14.2 Distribution of Gold by AUZON – Kerr Deposit
Seabridge Gold Inc. | 14-3 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Table 14.3 Distribution of Copper by CUZON – Kerr Deposit
14.1.2 | Assay Grade Capping – Kerr Deposit |
High-grade outlier values were identified using cumulative probability plots for gold, copper, silver, and molybdenum assays. This analysis was completed on the raw assay data prior to compositing for each metal by grade domains. Figure 14.1 shows an example of gold (upper) and copper (lower) cumulative probability plots. Assays from higher grade gold (+ 0.20 g/t) and copper (+0.2%) were used to generate the two probability plots. The circles indicate interpreted capping levels for each metal.
Seabridge Gold Inc. | 14-4 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 14.1 Gold-Copper Probability Plots – Kerr Deposit
Source: (RMI, 2019)
Based on the interpretation of the cumulative probability plots, assays were “cut” or capped at specified thresholds for each metal by grade wireframe domain. 53 gold assays were capped using 1.75 g/t for the lower grade wireframes and 10.0 g/t for the higher grade wireframes. 23 copper assays were capped at 2% for the lower grade domains and 4% for higher grade domains.
Seabridge Gold Inc. | 14-5 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
14.1.3 | Drill Hole Compositing – Kerr Deposit |
The capped drill hole assays were composited into 15 m long composites starting from the drill hole collar keying off of the grade wireframes to start/stop the compositing at wireframe contacts. Two sets of composites were generated, one for precious metals and another for base metals. The precious metal composites keyed off of the gold grade wireframes and the base metal composites keyed off of the copper grade wireframes. Most of the original assay data were in the range of 1.5 to 3.0 m long, with the majority being 2 m long. Based on the scale of the deposit, 15 m long composites were deemed to be an appropriate length for estimating Mineral Resources.
The assays were composited using MineSight® software. Various geologic data were assigned to the 15 m long composites using the majority rule method.
14.1.4 | Geologic Constraints - Kerr Deposit |
Lithologic, alteration, structural domains, and metal grade envelopes were constructed for the Kerr deposit by Seabridge and the Qualified Person responsible for this section of this Technical Report. Initially these various wireframes were interpreted onto cross sections, which were then reconciled in bench plan prior to building the final wireframe. Leapfrog software has been used in recent years as a method for generating wireframes for various attributes. The Leapfrog wireframes were typically modified to account for structural and lithologic criteria.
14.1.5 | Variography – Kerr Deposit |
Spatial continuity was investigated by generating both grade and indicator correlograms using Sage2001 software. Down-hole correlograms were used to establish nugget effects using 2 m long drill hole composites. Directional correlograms were generated using 15 m long drill hole composites in 30-degree vectors in plan and section. The autofit function in Sage2001 was used to model the 37 directional correlograms.
Figure 14.2 shows a gold (upper) and copper (lower) down-hole correlogram. Figure 14.3 shows three pertinent directional correlograms for gold (left panel) and copper (right panel) based on correlograms generated from 15 m composites.
Seabridge Gold Inc. | 14-6 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 14.2 Down-hole Grade Correlograms – Kerr Deposit
Source: (RMI, 2019)
Seabridge Gold Inc. | 14-7 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 14.3 Directional Grade Correlograms – Kerr Deposit
Source: (RMI, 2019)
Seabridge Gold Inc. | 14-8 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
14.1.6 | Grade Estimation Parameters – Kerr Deposit |
The Kerr deposit was modeled using MineSight®, a widely recognized commercial mine engineering software package. The non-rotated model uses NAD83 UTM coordinates with 15 m x 15 m x 15m blocks. Block gold, silver, copper, and molybdenum grades were estimated by two methods: inverse distance weighting (IDW), and nearest neighbour (NN). Trend planes were used to select eligible drill hole composites for the inverse distance grade models in lieu of traditional search ellipses. Four structural domain wireframes were developed to reflect different mineralized strike/dip regimes which allowed for specific trends to be applied tor each area. Two-pass strategy was used for estimating block gold, silver, copper, and molybdenum grades. A minimum of three composites, a maximum of six composites with no more than two composites per drill hole were used in the grade estimate process. The first estimation pass used a very narrow search in the direction perpendicular to the plunge of mineralization (400m x 400m x 20m). All blocks estimated by the first pass were flagged and not overwritten by the second estimation pass which used a 400m x 400m x 80m search relative to the specified trend plane. Grade envelopes were used as the primary constraint for selecting eligible drill hole composites. Gold wireframes were used in the estimate of gold and silver. Copper wireframes were used in the estimate of copper and molybdenum. The gold grade wireframes were not used as hard boundaries in the estimation process. Drill hole composites from an adjacent lower grade domain were potentially allowed to inform model blocks, provided the composites were located within the trend plane search parameters. For example, a model block within the 0.20 g/t domain could use composites from either the 0.20 g/t domain or the adjacent 0.10 g/t. The highest-grade copper domain (+ 1%) was treated as a hard contact in the estimation process based on visual observations of drill core.
14.1.7 | Grade Model Verification - Kerr Deposit |
Estimated block grades were verified by visual and statistical methods. Block grades (gold, silver, copper, and molybdenum) were visually compared with drill hole composite grades in cross section and level plan views. Figure 14.4 and Figure 14.5 are east-west cross sections through the Kerr block model showing gold and copper grades, respectively. For reference, the location of the Kerr cross sections is illustrated in Figure 10.2, a drill hole plan map for the Kerr deposit. Figure 14.6 and Figure 14.7 are block model level maps drawn at the 850 m elevation through the Kerr block model showing estimated block/composite gold and copper grades, respectively.
NN models were prepared for gold, copper, silver, and molybdenum in order to check for potential global biases in the estimated block grades. Swath plots were generated by block column (easting), block row (northing), and block level (elevation) comparing the NN grade with the IDW grade. Figure 14.8 shows two grade swath plots for gold (upper) and copper (lower) that compare the IDW grades in red versus the NN grades in blue by elevation. The results show that the inverse models compare very well with the NN grades on a local basis.
Seabridge Gold Inc. | 14-9 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 14.4 Kerr Cross Section 6,259,650 N. – Gold
Source: (RMI, 2019)
Seabridge Gold Inc. | 14-10 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 14.5 Kerr Cross Section 6,259,650 N. – Copper
Source: (RMI, 2019)
Seabridge Gold Inc. | 14-11 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 14.6 Kerr 850 m Level Plan – Gold
Source: (RMI, 2019)
Seabridge Gold Inc. | 14-12 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 14.7 Kerr 850 m Level Plan - Copper
Source: (RMI, 2019)
Seabridge Gold Inc. | 14-13 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 14.8 Kerr Gold-Copper Swath Plots by Elevation
Source: (RMI, 2019)
Seabridge Gold Inc. | 14-14 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
14.1.8 | Resource Classification – Kerr Deposit |
Mineral Resources were defined by drill hole spacing and mineralized continuity. Both Indicated and Inferred wireframes were constructed in cross section and level plan keying on distribution of drilling, mineralized trends, and post mineral structures.
Indicated Mineral Resources were restricted to the upper portion of the deposit where the density of drilling is much higher than the deeper mineralization. The Inferred Mineral Resource shape was generated to envelope the Indicated shape and to follow the two steep west dipping mineralized limbs of the deposit. In general, the drill hole spacing for Indicated Resources is about 50 m while the spacing for Inferred Resources varies between 125 m and 150 m, with wider spacing with depth.
14.2 | Sulphurets Deposit |
The Sulphurets geologic and grade models were updated in mid 2019 using data through the 2018 drilling campaign. Eleven new drill holes were completed within the Sulphurets mineralized zone since the last model update (EOY2011). After the Sulphurets model was updated, additional drill holes were completed in late 2019 to the west and east of the currently recognized mineralized system. The 2019 drill holes were compared against the EOY2018 model and were found to confirm the geologic interpretations and were consistent with the grade model in the area of the 2019 drilling.
14.2.1 | Grade Distribution – Sulphurets Deposit |
The distribution of gold and copper grades within the Sulphurets deposit were compared with logged lithology and alteration to determine if those attributes could be used for grade estimation purposes. Grade was often seen to cross-cut various lithologic and/or alteration boundaries or cut off by structures that form discrete blocks or panels of mineralization. Four gold and copper grade wireframes were designed by Seabridge’s geologic staff by structural block. In addition to the grade wireframes, three post-mineral dikes and a distinct monzonite intrusive unit were combined with the grade domains as an aid in constraining the estimate of block grades.
The distribution of gold based on uncapped, uncomposited assay data is summarized at four different cutoff grades by gold grade and lithologic wireframes. The data in Table 14.4 shows an average uncapped gold grade of 0.44 g/t for all data. The high coefficient of variation shown for all data and for the 0.125 g/t gold envelope were highly skewed by a single gold assay grade of 1,580 g/t from drill hole S-18-81. This highly anomalous sample was capped at 2.0 g/t which lowered the coefficient of variation from 23.4 to 1.6. Table 14.5 summarizes uncapped copper assay statistics by copper grade domain. The average copper grade for all data is seen to be 0.12% with a coefficient of variation of 1.49. The two higher grade domains (0.20% and 0.50%) show coefficients of variation that are less than 1.0, reflecting the role of grade domaining in reducing variability.
Seabridge Gold Inc. | 14-15 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Table 14.4 Distribution of Gold by AUZON – Sulphurets Deposit
Seabridge Gold Inc. | 14-16 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Table 14.5 Distribution of Copper by CUZON – Sulphurets Deposit
14.2.2 | Assay Grade Capping – Sulphurets Deposit |
High-grade outlier values were identified using cumulative probability plots for gold, copper, silver, and molybdenum assays. This analysis was completed on the raw assay data prior to compositing for each metal by grade domains. Figure 14.9 shows examples of gold (upper) and copper (lower) cumulative probability plots for all Sulphurets assays.
Based on the interpretation of the cumulative probability plots, assays were “cut” or capped at specified thresholds for each metal by grade wireframe domain. A total of 112 gold assay samples were capped. The lower grade gold domains, post mineral dikes, and monzonite were capped at 1 g/t. The upper grade gold domains (0.25 to 0.50 and + 0.50 g/t domains) were capped at 5.0 and 10.0 g/t, respectively. 137 copper assays were capped at 0.60% and 1.00% for the lower grade domains and 2% for high-grade domain (e.g. + 0.5%). The gold and copper limits applied to the end-of-year 2018 Sulphurets model were similar to the previous end-of-year 2011 model.
Seabridge Gold Inc. | 14-17 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 14.9 Gold-Copper Probability Plots – Sulphurets Deposit
Source: (RMI, 2019)
Seabridge Gold Inc. | 14-18 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
14.2.3 | Drill Hole Compositing – Sulphurets Deposit |
The capped drill hole assays were composited into 10 m long composites starting from the drill hole collar keying off of the grade wireframes to start/stop the compositing at wireframe contacts using MineSight® software. Various geologic data were assigned to the drill hole composites using the majority rule method. Four sets of composites were generated, one for each of the estimated metals (i.e. gold, silver, copper, and molybdenum). Most of the original assay data were in the range of 1.5 to 3.0 m long, with the majority being 2 m long. Based on the scale of the deposit and model block dimensions, 10 m long composites were deemed to be an appropriate length for estimating Mineral Resources.
14.2.4 | Geologic Constraints – Sulphurets Deposit |
Lithologic, alteration, structural domains, and metal grade envelopes were constructed for the Sulphurets deposit by Seabridge and the Qualified Person responsible for this section of this Technical Report. Leapfrog software was used to generate preliminary wireframes that were further modified to account for various structural and lithologic criteria.
After reviewing gold and copper distribution by lithology and alteration it was determined that independently constructed grade wireframes would be more appropriate for estimating block grades. Five structural domain wireframes were also used in the interpolation plan as hard boundaries along post mineral structures that locally juxtapose well mineralized material against poorly mineralized rock.
14.2.5 | Variography – Sulphurets Deposit |
Spatial continuity was investigated by generating both grade and indicator correlograms using Sage2001 software. Down-hole correlograms were used to establish nugget effects using 2 m long drill hole composites. Directional correlograms were generated using 10 m long drill hole composites in 30-degree vectors in plan and section. The autofit function in Sage2001 was used to model the 37 directional correlograms.
Figure 14.10 shows a gold (upper) and copper (lower) down-hole correlogram. Figure 14.11 shows three pertinent directional correlograms for gold (left panel) and copper (right panel) based on Sage2001 correlograms.
Seabridge Gold Inc. | 14-19 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 14.10 Down-hole Grade Correlograms – Sulphurets Deposit
Source: (RMI, 2019)
Seabridge Gold Inc. | 14-20 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 14.11 Directional Grade Correlograms – Sulphurets Deposit
Source: (RMI, 2019)
Seabridge Gold Inc. | 14-21 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
14.2.6 | Grade Estimation Parameters – Sulphurets Deposit |
The Sulphurets deposit was modeled using MineSight®, a widely recognized commercial mine engineering software package. The non-rotated model uses NAD83 UTM coordinates with 12.5 m x 12.5 m x 15m blocks.
Block gold, copper, silver and molybdenum grades were estimated by three primary methods: IDW, OK, NN. The OK model was selected for resource declaration after comparing that model with the IDW model.
Independently constructed gold, copper, silver, and molybdenum wireframes provided the principal constraint in the grade estimation plan. In addition to the grade envelopes, five structural domain wireframes were developed to reflect different mineralized strike/dip regimes which allowed for specific search ellipses to be incorporated for each structural block. The gradeshells were treated as soft contacts in the grade estimation plan where lower grade samples were allowed to inform the next highest grade shell but the higher grade samples were not allowed to inform adjacent lower grade zones.
A two-pass strategy was used for estimating block gold, silver, copper, and molybdenum grades for both the IDW and OK models. The first estimation pass used a 275 m x 275 m x 55 m search ellipse that required a minimum of five drill hole composites, a maximum of nine composites with no more than three composites per drill hole. That criteria resulted in blocks being estimated at least two drill holes. All blocks estimated by the first pass were flagged and not overwritten by the second estimation pass which used a 125 m x 125 m x 25 m search that required a minimum of two drill hole composites, a maximum of nine composites with no more than three composites per drill hole. That criteria resulted in blocks that could have been estimated by one or more drill holes.
Narrow, post-mineral dike wireframes were developed for the end-of-year 2018 Sulphurets geologic model. The volume percentage of these narrow dikes was stored in the block model. Two grades were estimated for blocks that contained less than 50% dike material. One grade was based on dike-only samples, and the other block grade was estimated with samples that matched the grade shell code of the remaining majority percentage of the block. A final weighted block grade was calculated using the two block proportions and their associated grades. Blocks that contained more than 50% dike were considered to be 100% dike material.
14.2.7 | Model Validation – Sulphurets Deposit |
Estimated block grades (gold, silver, copper, and molybdenum) were compared to drill hole composite grades in cross section and level plan views. Figure 14.12 and Figure 14.13 are northwest-southeast cross sections drawn through the Sulphurets block model (refer to Figure 10.3 for the location of Section 20). Figure 14.14 and Figure 14.15 are block model level maps drawn at the 1135 m elevation through the Sulphurets block model showing estimated block grades and drill hole composite for gold and copper, respectively.
Seabridge Gold Inc. | 14-22 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 14.12 Sulphurets Cross Section 20 - Gold
Source: (RMI, 2019)
Seabridge Gold Inc. | 14-23 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 14.13 Sulphurets Cross Section 20 – Copper
Source: (RMI, 2019)
Seabridge Gold Inc. | 14-24 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 14.14 Sulphurets 1135m Level Plan - Gold
Source: (RMI, 2019)
Seabridge Gold Inc. | 14-25 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 14.15 Sulphurets 1135 m Level Plan – Copper
Source: (RMI, 2019)
Seabridge Gold Inc. | 14-26 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
The grade models were also validated by comparing the OK block grades against NN models that were generated for gold, copper, silver, and molybdenum.
Grade swath plots were generated for rows (east-west), columns (north-south) and levels (elevations) through the block model comparing the OK and NN models at a zero cutoff grade. Figure 14.16 shows swath plots for gold (upper) and copper (lower) by elevation. These swath plots show Indicated and Inferred Resource grades.
Figure 14.16 Sulphurets Gold-Copper Swath Plots by Elevation
Source: (RMI, 2019)
Seabridge Gold Inc. | 14-27 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
14.2.8 | Resource Classification – Sulphurets Deposit |
Mineral Resources were assigned to the estimated blocks by constructing 3D solids for Indicated and Inferred Resources. These shapes were based on mineralized continuity as defined by exploration drill hole results. The Indicated Mineral Resource shape was locally extended 25 m to 100 m deeper than the shape used for the 2016 PFS Mineral Resource based on drilling results obtained in 2013 through 2018 with an average drill hole spacing of approximately 60 m to 75 m. The average drill hole spacing for Indicated and Inferred blocks is approximately 50 m to 75 m and 75 m to 125 m, respectively.
14.3 | Mitchell Deposit |
The basis for Mitchell Mineral Resources is the block model that was used in the 2016 PFS (Tetra Tech, 2016). That model was constructed using drilling data collected through 2011. Since that model was completed, 23 holes were drilled within the Mitchell resource area, although only 8 holes intersected estimated Mineral Resources based on the end-of-year 2011 block model. Grade comparisons between the 8 new holes and the Mitchell block model were presented in Section 12.2.
14.3.1 | Metal Distribution – Mitchell Deposit |
Basic descriptive statistics were generated by various logged attributes like lithology and alteration. The interpretation of those results did not identify any single or combined attributes that adequately defined the principal controls of mineralization. Independently generated gold, copper, and molybdenum wireframes were developed by Seabridge’s geologic staff. Table 14.6 summarizes uncapped gold assay distributions at four cutoff grades for seven of the gold wireframe domains. Included with the gold grade shell domains are a structurally controlled bornite copper zone and an associated leach breccia zone. Table 14.7 summarizes uncapped copper assay distributions at four cutoff grades plus the two aforementioned copper zones (bornite and leach).
Seabridge Gold Inc. | 14-28 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Table 14.6 Distribution of Gold by AUZON – Mitchell Deposit
Seabridge Gold Inc. | 14-29 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Table 14.7 Distribution of Copper by CUZON – Mitchell Deposit
14.3.2 | Assay Grade Capping – Mitchell Deposit |
Cumulative probability plots were used to identify high-grade outliers for gold, copper, silver, and molybdenum based on the original assay samples. The assays were initially examined with respect to logged lithology and alteration types however the final analysis of high-grade outliers was completed using the grade wireframes that were used to interpolate block grades. Figure 14.17 shows gold (upper) and copper (lower) cumulative probability plots that define the distribution of assays.
Seabridge Gold Inc. | 14-30 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 14.17 Gold-Copper Cumulative Probability Plots – Mitchell Deposit
Source: (RMI, 2019)
Seabridge Gold Inc. | 14-31 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
14.3.3 | Drill Hole Compositing – Mitchell Deposit |
Drill hole assay data (both uncapped and capped intervals) were composited into 15 m long composites starting from the drill hole collar. Most of the original assay data were in the range of 1.5 m to 3.0 m long, with the majority being 2 m long. Based on the scale of the deposit, 15 m long composites were deemed to be an appropriate length for estimating Mineral Resources. Prior to creating the drill hole composites, the drill hole intervals were coded with the same grade wireframes that were used to constrain the estimate of block grades.
After compositing, block model attributes like lithology, alteration, fault block, and grade envelopes were backtagged from the model to the drill hole composites.
14.3.4 | Variography – Mitchell Deposit |
A variety of grade and indicator variograms were generated for the Mitchell deposit using MineSight® and Sage2001 software. Figure 14.18 shows gold (upper) and copper (lower) down-hole correlograms based on 2 m long drill hole composites.
Figure 14.19 shows key directional correlograms for gold (left panel) and copper (right panel) based on 15 m drill hole composites. Nested spherical models were used in modeling the Mitchell gold and copper correlograms. The gold and particularly the copper directional correlograms show relatively long ranges.
Seabridge Gold Inc. | 14-32 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 14.18 Down-hole Grade Correlograms – Mitchell Deposit
Source: (RMI, 2019)
Seabridge Gold Inc. | 14-33 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 14.19 Directional Grade Correlograms – Mitchell Deposit
Source: (RMI, 2019)
Seabridge Gold Inc. | 14-34 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
14.3.5 | Grade Estimation Parameters – Mitchell Deposit |
Gold, copper, silver, and molybdenum block grades were estimated for the Mitchell deposit using a multi-pass inverse distance squared (IDW) method. Grades were estimated using 15 m long drill hole composites. The gold grade wireframes were used as the primary constraint in estimating gold and silver grades. Independently developed copper and molybdenum wireframes provided the primary constraint for copper and molybdenum estimation, respectively. In addition to the grade shell domains, two structural domains were defined by the Mitchell thrust fault which was treated as a hard contact in the estimation plan.
For the key gold grade wireframe zones, both gold and silver grades were estimated using four passes featuring increasingly larger search ellipses. Once estimated blocks were flagged as final and were not overwritten by subsequent estimation passes. For the first three passes, a minimum of three, a maximum of eight composites were required with no more than two composites per drill hole. This requirement resulted in blocks that were estimated by at least two different drill holes. The first pass used an ellipse measuring 125 m x 125 m x 30 m. The second pass was doubled to 250 m x 250 m x 60 m. The third pass ellipse dimension was tripled to 375 m x 375 m x 90 m. The fourth pass was treated as a cleanup run to provide a local estimate around isolated drill holes.
The number of composites, drill holes, average distance of drill holes used, and distance to the closest drill hole used were stored during the estimation process. These attributes were used in conjunction with wireframes in defining Mineral Resource categories.
Similar to gold, copper grades were estimated by a multi-pass inverse distance squared method. Copper grade envelopes and the two aforementioned structural domains were used as the primary constraint in the estimation plan. A three-pass strategy was used where increasingly larger search ellipses were used. The first pass ellipse measured 150 m x 150 m x 30 m and required a minimum of three, a maximum of eight composites and no more than two composites from each drill hole. The second estimation pass ellipse dimensions were doubled (i.e. 250 m x 250 m x 60 m) with the same drill hole composite criteria. The final estimation pass was extended to 500 m x 500 m x 120 m. The last copper estimation pass was used to provide an estimate for blocks that were not informed by at least two drill holes. Like gold, the number of copper composites, drill holes and distances to data were stored in the model.
Molybdenum block grades were estimated using a two-pass inverse distance squared estimation method. The first pass used a spherical search ellipse measuring 300 m and only required a minimum of one drill hole. The second pass ellipse was allowed to overwrite results from the first pass provided at least two drill holes were found within a 250 m x 250 m x 50 m ellipse that required a minimum of three, a maximum of eight composites with no more than two per drill hole.
Nearest neighbor grade models were generated simultaneously with the inverse distance models using the same constraint requirements (i.e. grade shell and structural block criteria). Results from the nearest neighbor models were used in verifying that the grade model was globally unbiased.
14.3.6 | Grade Model Validation – Mitchell Deposit |
Estimated block grades (gold, silver, copper, and molybdenum) were compared to drill hole composite grades in cross section and level plan views. Figure 14.20 and Figure 14.21 are north-south cross sections drawn through the Mitchell block model. The location of Mitchell Section 11 shown in Figures 14.20 and 14.21 is illustrated in Figure 10.4. Figure 14.22 and Figure 14.23 are block model level maps drawn at the 760 m elevation through the Mitchell block model showing estimated block grades and drill hole composite grades for gold and copper, respectively. The constraining Mineral Resource pit and block cave shape are shown on the block model cross sections.
Seabridge Gold Inc. | 14-35 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 14.20 Mitchell Cross Section 11 - Gold
Source: (RMI, 2019)
Seabridge Gold Inc. | 14-36 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 14.21 Mitchell Cross Section 11 - Copper
Source: (RMI, 2019)
Seabridge Gold Inc. | 14-37 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 14.22 Mitchell760 m Level Plan - Gold
Source: (RMI, 2019)
Seabridge Gold Inc. | 14-38 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 14.23 Mitchell 760 m Level Plan - Copper
Source: (RMI, 2019)
Seabridge Gold Inc. | 14-39 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
The grade models were also validated by comparing the IDW block grades against NN models that were generated for gold, copper, silver, and molybdenum.
Grade swath plots were generated for rows (east-west), columns (north-south) and levels (elevations) through the block model comparing the IDW and NN models at a zero cutoff grade. Figure 14.24 shows grade swath plots by elevation for gold (upper panel) and copper (lower panel). These swath plots show results from all resource blocks.
Figure 14.24 Mitchell Swath Plots by Elevation
Source: (RMI, 2019)
Seabridge Gold Inc. | 14-40 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
14.3.7 | Resource Classification – Mitchell Deposit |
Mineral Resources were assigned to the estimated blocks through a combination of coding blocks with a wireframe representing Indicated Resources and the number of drill holes and distance to drilling. The Indicated Resource wireframe was constructed by generating a gold equivalent probability model. Blocks with an estimated probability in excess of 50% for a 0.50 g/t gold equivalent cutoff grade were used as a guideline in drawing shapes in cross section that were reconciled in plan view for creation of the final wireframe solid. Blocks inside of the Indicated shape were then coded as Measured Resources if the blocks were estimated by two or more holes with one of the holes located within 50 m of the block or one drill hole within 17 m of the block. Blocks not coded as Measured or Indicated were then flagged as Inferred Resources based on distance to drilling and the number of holes used. Blocks were flagged as Inferred if they were estimated by one hole within 75 m or two holes within 175 m of the block. In general, the drill hole spacing for Measured and Indicated Resources is about 75 to 100 meters while the spacing for Inferred Resources varies between 100 and 150 meters, with wider spacing with depth.
14.4 | Iron Cap Deposit |
The Iron Cap grade model was updated following the completion of the 2018 drilling campaign. A total of 99 diamond core holes totaling about 66,740 m were used in the update. Previous Iron Cap models used trend plane searches and inverse distance estimation methods. The end-of-year 2018 model which is the basis for Mineral Resources that are the subject of this Technical Report is based on OK methods that used conventional search ellipses.
14.4.1 | Grade Distribution – Iron Cap Deposit |
Basic descriptive statistics were generated for various logged attributes like lithology and alteration. The interpretation of those results did not identify any single or combined attributes that adequately defined the principal controls of mineralization. Independently generated gold, copper, and molybdenum wireframes were developed by Seabridge’s geologic staff. Table 14.8 summarizes uncapped gold assay distributions at four cutoff grades for five gold wireframe domains. Table 14.9 summarizes uncapped copper assay distributions at five cutoff grades.
Seabridge Gold Inc. | 14-41 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Table 14.8 Distribution of Gold by AUZON – Iron Cap Deposit
Seabridge Gold Inc. | 14-42 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Table 14.9 Distribution of Copper by CUZON – Iron Cap Deposit
14.4.2 | Assay Grade Capping – Iron Cap Deposit |
Cumulative probability plots were used to identify high-grade outliers for gold, copper, silver, and molybdenum based on the original assay samples. The assays were initially examined with respect to logged lithology and alteration types. However, the final analysis of high-grade outliers was completed using the grade wireframes that were used to interpolate block grades. Figure 14.25 shows gold (upper) and copper (lower) cumulative probability plots that define the distribution of assays.
Seabridge Gold Inc. | 14-43 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 14.25 Gold-Copper Cumulative Probability Plots – Iron Cap Deposit
Source: (RMI, 2019)
Seabridge Gold Inc. | 14-44 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
14.4.3 | Drill Hole Compositing – Iron Cap Deposit |
The capped drill hole assays were composited into 10 m long composites starting from the drill hole collar keying off of the grade wireframes to start/stop the compositing at wireframe contacts using MineSight® software. Various geologic data were assigned to the drill hole composites using the majority rule method. Two sets of composites were generated, one for precious metals (gold and silver) and one for base metals (copper and molybdenum). Most of the original assay data were in the range of 1.5 to 3.0 m long, with the majority being 2 m long. Based on the scale of the deposit and model block dimensions, 10 m long composites were deemed to be an appropriate length for estimating Mineral Resources.
14.4.4 | Geologic Constraints – Iron Cap Deposit |
Lithologic, alteration, structural domains, and metal grade envelopes were constructed for the Sulphurets deposit by Seabridge and the Qualified Person responsible for this section of this Technical Report. Leapfrog software was used to generate preliminary wireframes that were further modified to account for various structural and lithologic criteria.
After reviewing gold and copper distribution by lithology and alteration it was determined that independently constructed grade wireframes would be more appropriate for estimating block grades. Three structural domains were also used in the interpolation plan as hard boundaries.
14.4.5 | Variography – Iron Cap Deposit |
Spatial continuity was investigated by generating both grade and indicator correlograms using Sage2001 software. Down-hole correlograms were used to establish nugget effects using 2 m long drill hole composites. Directional correlograms were generated using 10 m long drill hole composites in 30-degree vectors in plan and section. The autofit function in Sage2001 was used to model the 37 directional correlograms.
Figure 14.26 shows gold (upper) and copper (lower) down-hole correlograms. Figure 14.27 shows three pertinent directional correlograms for gold (left panel) and copper (right panel) based on Sage2001 correlogram.
Seabridge Gold Inc. | 14-45 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 14.26 Down-hole Grade Correlograms – Iron Cap Deposit
Source: (RMI, 2019)
Seabridge Gold Inc. | 14-46 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 14.27 Directional Grade Correlograms – Iron Cap Deposit
Source: (RMI, 2019)
14.4.6 | Grade Estimation Parameters – Iron Cap Deposit |
The Iron Cap deposit was modeled using MineSight® software, a widely recognized commercial mine engineering software package. The non-rotated model uses NAD83 UTM coordinates with 15 m x 15 m x 15 m blocks.
Block gold, copper, silver and molybdenum grades were estimated by three primary methods: IDW, OK, and NN. The OK model was selected for resource declaration after comparing that model with the IDW model and NN models.
Seabridge Gold Inc. | 14-47 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Independently constructed gold, copper, silver, and molybdenum wireframes provided the principal constraint in the grade estimation plan. In addition to the grade envelopes, three structural domain wireframes were developed to reflect different mineralized strike/dip regimes which allowed for specific search ellipses to be incorporated tor each structural block. The gradeshells were treated as soft contacts in the grade estimation plan where lower grade samples were allowed to inform the next highest grade shell but the higher grade samples were not allowed to inform adjacent lower grade zones.
A four-pass strategy was used for estimating block gold, silver, copper, and molybdenum grades for both the IDW and OK models. The first estimation pass used a 175 m x 175 m x 35 m search ellipse that required a minimum of five drill hole composites, a maximum of nine composites with no more than three composites per drill hole. That criteria resulted in blocks being estimated with at least two drill holes. All blocks estimated by the first pass were flagged and not overwritten by the subsequent estimation passes. The second pass used a 350 m x 350 m x 70 m search that required a minimum of five drill hole composites, a maximum of nine composites with no more than three composites per drill hole. The third estimation pass used a 500 m x 500 m x 100 m search ellipse and the same number of composites as pass one and two. A final cleanup pass used the same search ellipse as the third pass but only required a minimum of one drill hole.
NN models were generated for each metal at the same time the ordinary kriged grade was estimated. The NN models were used to access potential global biases in the grade estimates.
The number of composites and drill holes used to estimate each block along with distances to data (average and closest) were stored and used to help in the determination of Mineral Resource categories.
14.4.7 | Grade Model Verification – Iron Cap Deposit |
Estimated block grades (gold, silver, copper, and molybdenum) were compared to drill hole composite grades in cross section and level plan views. Figure 14.28 and Figure 14.29 are northwest-southeast cross sections drawn through the Iron Cap block model (refer to Figure 10.5 for the location of cross section 12). Figure 14.30 and Figure 14.31 are block model level maps drawn at the 1200 m elevation through the Iron Cap block model showing estimated block grades and drill hole composite for gold and copper, respectively.
Seabridge Gold Inc. | 14-48 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 14.28 Iron Cap Cross Section 12 – Gold
Source: (RMI, 2019)
Seabridge Gold Inc. | 14-49 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 14.29 Iron Cap Cross Section 12 – Copper
Source: (RMI, 2019)
Seabridge Gold Inc. | 14-50 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 14.30 Iron Cap 1200 m Level Plan – Gold
Source: (RMI, 2019)
Seabridge Gold Inc. | 14-51 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 14.31 Iron Cap 1200 m Level Plan – Copper
Source: (RMI, 2019)
Seabridge Gold Inc. | 14-52 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Grade swath plots were generated for rows (east-west), columns (north-south) and levels (elevations) through the block model comparing the OK and NN models at a zero cutoff grade. Figure 14.32 shows swath plots for gold (upper) and copper (lower) by elevation. These swath plots show Indicated and Inferred Resource grades.
Figure 14.32 Iron Cap Gold-Copper Swath Plots by Elevation
Source: (RMI, 2019)
Seabridge Gold Inc. | 14-53 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
14.4.8 | Resource Classification – Iron Cap Deposit |
Mineral Resources were assigned to the estimated blocks by constructing 3D solids for Indicated and Inferred Resources. These shapes were based on mineralized continuity as defined by exploration drill hole results. The average drill hole spacing for Indicated and Inferred blocks is approximately 75 m and 125 to 150 m, respectively. The drill hole spacing is wider at depth for Inferred Resources.
14.5 | Bulk Density |
Bulk density values were assigned to each deposit based on an analysis of available specific gravity analyses that were performed on drill core during the core logging process. Bulk density determinations were routinely performed on core samples at a frequency of one sample per 100 m of drilling. While rare, apparent anomalously high or low determinations were excluded for analysis. Most of bulk density data were assigned to each deposit by average densities by modeled lithology or alteration. Overburden and ice were assigned densities of 2.0 g/cm3 and 0.9 g/cm3. Bulk density values ranging between 2.7 g/cm3 and 2.8 g/cm3 were assigned to the four mineralized deposits.
14.6 | Resource Criteria |
Based on calculated block NSR values, conceptual resource open pits and block cave underground shapes were generated for each model. Metal prices, costs (mining, processing and G&A), slope angles, and NSR cutoff grades are summarized in Table 14.10.
Table 14.10 Key Mineral Resource Parameters
Seabridge Gold Inc. | 14-54 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
14.7 | Summary of KSM Mineral Resources |
Mineral Resources were established for the various KSM mineralized zones using conceptual open pit and block cave shapes which were used to establish reasonable prospects for eventual economic extraction as outlined in the CIM Definition Standards for Mineral Resources and Mineral Reserves (CIM, 2014).
The conceptual open pit and underground mining shapes were generated for each resource area based on calculated block model NSR values. The NSR values were generated for each deposit by and reviewed by MMTS. The Qualified Person responsible for this section of this Technical Report generated conceptual pits for the Kerr, Sulphurets, and Mitchell deposits using MineSight® software and Lerchs-Grossmann algorithms. Golder Associates developed conceptual block cave footprints using the block NSR values and Geovia’s PCBC Footprint Finder software. The footprint polygons were extruded vertically based on guidance from Golder Associates.
Conceptual open pit shells were generated for the KSM deposits using the parameters summarized in Table 14.10 using MineSight®. Conceptual block cave shapes were defined for the Kerr, Mitchell, and Iron Cap deposits by Golder Associates using the parameters summarized in Table 14.10. Golder used PCBC software to define hypothetical draw point elevations at a Cdn$16 shutoff. The draw point extraction elevations were extruded vertically to create 3D solids that were used for resource tabulation. Conceptual caves were clipped against surface topography (Iron Cap) or conceptual resource pits (Kerr and Mitchell). Mineral Resources are summarized by resource category and mineralized zone in Table 14.11 at Cdn$9 and Cdn$16 NSR cutoffs for surface and underground resources, respectively.
Seabridge Gold Inc. | 14-55 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Table 14.11 KSM Mineral Resources
Notes: Mineral Resources have an effective date of December 31, 2019. The 2019 Sulphurets drill holes were not used in the construction of the resource model but were used to validate the interpretations of the model. Mineral Resources that are not Mineral Reserves do not have demonstrated economic viability. It is reasonably expected that the majority of Inferred Mineral Resources could be upgraded to Indicated Mineral Resources with continued exploration. The Mineral Resources tabulated in Table 14.11 are inclusive of Mineral Reserves. Numbers may not add due to precision and roundoff of tonnes and grade.
14.8 | General Discussion |
The QP responsible for this section of this Technical Report is not aware of any specific environmental, permitting, legal, taxation, socio-economic, marketing, political or other relevant factors, other than what is identified in this Technical Report, that could materially affect the Mineral Resource estimates that are the subject of this section.
Seabridge Gold Inc. | 14-56 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
15.0 | Mineral Reserve Estimates |
15.1 | Introduction |
Mineral Reserves are based on modifying factors applied to Measured and Indicated Mineral Resources within a PFS mining study.
15.2 | Open Pit Reserve Parameters |
Open pit Mineral Reserves use whole block grades. Open pit mining loss and dilution assumptions are shown in Table 15.1 and Table 15.2. The derivation of loss and dilution assumptions are described in Section 16.0.
Table 15.1 Pit Mining Loss and Dilution
Pit |
Total
Loss (%) |
Dilution
(%) |
Mitchell | 2.2 | 0.8 |
Sulphurets | 5.3 | 3.9 |
Kerr | 4.5 | 3.2 |
The dilution tonnes are added as a percentage of ore tonnes from Table 15.1 at the average grade of mineralized material within the pits that is below cut-off as presented in Table 15.2.
Table 15.2 Grade of Dilution Material by Pit Area
Mitchell | Kerr | Sulphurets | |
Au (g/t) | 0.21 | 0.12 | 0.26 |
Cu (%) | 0.04 | 0.08 | 0.04 |
Ag (g/t) | 1.52 | 0.64 | 0.70 |
Mo (ppm) | 52.0 | 2.5 | 16.0 |
NSR (Cdn$/t) | 6.70 | 4.70 | 6.20 |
Seabridge Gold Inc. | 15-1 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
The open pit minimum NSR cut-off grade is based on an estimated process operating cost of Cdn$9.00/t. Process operating costs include plant processing (including crushing/conveying costs where applicable), G&A, surface service, tailing construction, and water treatment costs. The NSR grade used for mine planning is described in Section 16.0. A variable cut-off grade strategy has been used; a higher cut-off grade of Cdn$20.00/t is used until the end of Year 5 to maximize the NPV. During this time material between Cdn$9.00/t and Cdn$20.00/t is stockpiled and some of it is reclaimed through the mine life at the average grade of the stockpile. The premium cut-off grade in the early years of the mine schedule assists in minimizing the initial capital payback time. The cut-off grade by mine area is as follows:
● | Mitchell Open Pit NSR Cut-off Grade – Cdn$9.00/t to Cdn$20.00/t |
● | Sulphurets Open Pit NSR Cut-off Grade – Cdn$9.00/t to Cdn$20.00/t |
● | Kerr Open Pit NSR Cut-off Grade – Cdn$9.00/t. |
15.3 | Underground Mining Reserve Parameters |
The underground Mineral Reserves have been determined using block grades from the Mineral Resource model with mining dilution and losses being determined as an integral part of the caving mining analysis undertaken using GEOVIA’s PCBC™ software. The NSR grade used to determine value of the mineralized rock mucked from the drawpoints is described in Section 16.0. The site operating costs (mining and process) used in the analysis are presented in Table 15.3. The first part of the analysis determined the elevation of the production level and the shape of the production footprint at which the net value (NSR less site operating cost) of the mineralized rock to be mucked was a maximum.
Table 15.3 Site Operating Cost – Drawpoint Shut-off
Mitchell
(Cdn$/t) |
Iron Cap
(Cdn$/t) |
|
Underground Mining | 6.00 | 7.00 |
Process | 9.00 | 9.00 |
Total | 15.00 | 16.00 |
The
second part of the analysis determined a production and grade schedule based on mineralized rock mucked at the drawpoints that
had a net positive value. If the net value during the mucking process is negative at any stage of the mining process, it is “shut-off”.
Both the first and second parts of the analysis incorporate rock that is mucked as diluted, and the shutting-off of uneconomic
drawpoints results in losses of resources. Dilution includes Mineral Resources that have grade but are sub-economic (less than
drawpoint shut-off). Inferred Mineral Resources and non-mineralized rock are assumed to have zero grade. Underground mining dilution
estimates from the PCBC™ assessments for the Mitchell and Iron Cap deposits are shown in Table 15.4.
Seabridge Gold Inc. | 15-2 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Table 15.4 Underground Mining Dilution
Deposit |
Sub-economic
Dilution (%) |
Zero Grade
Dilution (%) |
Total
(%) |
Mitchell | 2 | 13 | 15 |
Iron Cap | 11 | 9 | 20 |
Drawpoint shut-offs (where the material being mucked becomes uneconomic) use the site operating cost (mining and process) shown in Table 15.3.
Process operating costs presented in Table 15.3 include plant processing (including crushing/conveying costs where applicable), G&A, surface service, tailing construction, and water treatment costs.
15.4 | Mineral Reserves |
Proven and Probable Mineral Reserves are summarized in Table 15.5 and match the production plan described in Section 16.0. The Qualified Persons are not aware of any other risks, other than those identified in this Report, that could materially affect the Mineral Reserve estimates.
Table 15.5 Proven and Probable Reserves
Ore
(Mt) |
Diluted Grades | Contained Metal | ||||||||
Au
(g/t) |
Cu
(%) |
Ag
(g/t) |
Mo
(ppm) |
Au
(Moz) |
Cu
(Mlb) |
Ag
(Moz) |
Mo
(Mlb) |
|||
Proven | Mitchell Open Pit | 460 | 0.68 | 0.17 | 3.1 | 59 | 10.1 | 1,767 | 45 | 60 |
Kerr Open Pit | 0 | 0.00 | 0.00 | 0.0 | 0 | 0.0 | 0 | 0 | 0 | |
Sulphurets Open Pit | 0 | 0.00 | 0.00 | 0.0 | 0 | 0.0 | 0 | 0 | 0 | |
Mitchell Underground | 0 | 0.00 | 0.00 | 0.0 | 0 | 0.0 | 0 | 0 | 0 | |
Iron Cap Underground | 0 | 0.00 | 0.00 | 0.0 | 0 | 0.0 | 0 | 0 | 0 | |
Total Proven | 460 | 0.68 | 0.17 | 3.1 | 59 | 10.1 | 1,767 | 45 | 60 | |
Probable | Mitchell Open Pit | 481 | 0.63 | 0.16 | 2.9 | 66 | 9.7 | 1,677 | 44 | 70 |
Kerr Open Pit | 276 | 0.22 | 0.43 | 1.0 | 3 | 2.0 | 2,586 | 9 | 2 | |
Sulphurets Open Pit | 304 | 0.59 | 0.22 | 0.8 | 52 | 5.8 | 1,495 | 8 | 35 | |
Mitchell Underground | 453 | 0.53 | 0.17 | 3.5 | 34 | 7.7 | 1,648 | 51 | 34 | |
Iron Cap Underground | 224 | 0.49 | 0.20 | 3.6 | 13 | 3.5 | 983 | 26 | 6 | |
Total Probable | 1,738 | 0.51 | 0.22 | 2.5 | 38 | 28.7 | 8,388 | 138 | 147 | |
Proven + Probable | Mitchell Open Pit | 941 | 0.65 | 0.17 | 3.0 | 63 | 19.8 | 3,444 | 89 | 130 |
Kerr Open Pit | 276 | 0.22 | 0.43 | 1.0 | 3 | 2.0 | 2,586 | 9 | 2 | |
Sulphurets Open Pit | 304 | 0.59 | 0.22 | 0.8 | 52 | 5.8 | 1,495 | 8 | 35 | |
Mitchell Underground | 453 | 0.53 | 0.17 | 3.5 | 34 | 7.7 | 1,648 | 51 | 34 | |
Iron Cap Underground | 224 | 0.49 | 0.20 | 3.6 | 13 | 3.5 | 983 | 26 | 6 | |
Total Proven + Probable | 2,198 | 0.55 | 0.21 | 2.6 | 43 | 38.8 | 10,155 | 183 | 207 |
Note: All Mineral Reserves stated above account for mining loss and dilution.
Seabridge Gold Inc. | 15-3 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
15.5 | Factors that could affect the mineral reserve estimate |
Mineral Reserves are based on the engineering and economic analysis described in Sections 16 to 22 of this Report. Changes in the following factors and assumptions could affect the Mineral Reserve estimate:
● | assumptions on weather and climate |
● | effects of climate change |
● | metal prices |
● | interpretations of mineralization geometry and continuity of mineralization zones |
● | interpolation assumptions |
● | geotechnical and hydrogeological assumptions |
● | block caving geomechanical assumptions |
● | operating cost assumptions |
● | process plant and mining recoveries |
● | ability to meet and maintain permitting and environmental license conditions |
● | ability to maintain the social license to operate. |
Seabridge Gold Inc. | 15-4 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
16.0 | Mining Methods |
16.1 | Introduction |
The Mining Methods section of the 2016 PFS has been reproduced and summarized in this Technical Report without change to the mine design. A PFS-level production schedule, based on an annualized average 130,000 t/d mill feed rate, has been developed for the PFS based on a combined open pit and underground mine plan. Pit phases at Mitchell, Kerr, and Sulphurets deposits are engineered based on an economic pit limit analysis. Underground mining has been adopted at Iron Cap and below the Mitchell open pit to reduce the volume of waste generated from the mine.
16.1.1 | Production Rate Consideration |
The 2016 PFS is based on the open pit and underground mine plans, to combine to an annual throughput of 130,000 t/d. This throughput was assessed and approved during the EA review process completed in 2015. Studies indicate there is an opportunity for improving the PFS NPV by increasing the mill throughput above 130,000 t/d early in the mine life.
The entire open pit and underground mining operation results in a mine life based on the 2016 PFS of approximately 53 years.
16.2 | Open Pit Mining Operations |
16.2.1 | Introduction |
The open pit mine planning work for this study is based on previous work including design criteria from the Application/EIS (Rescan 2013).
In addition to the geological information used for the block model, other data used for mine planning include the base economic parameters (metal prices, etc.), mining cost data derived from supplier estimates and data from other projects in the local area, recommended prefeasibility pit slope angles (PSAs), projected metallurgical recoveries, plant costs, and throughput rates.
16.2.2 | Mining Datum |
The 2016 PFS design work is based on NAD83 coordinates. Historical drill hole information is based on various surveys with different sets of control that have been converted to NAD83. Topography is described in Section 12.1.6.
Seabridge Gold Inc. | 16-1 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
16.2.3 | Open Pit Production Rate Considerations |
The ore production rate is maintained at 130,000 t/d up to Year 35. At the introduction of underground mining at Mitchell in Year 23 and continuing through Iron Cap ore production commencing in Year 32, the open pit production is adjusted so that the combined open pit and underground production matches the maximum mill throughput. The underground mine plans are described in detail in Section 16.3.
After Year 35, the underground production becomes the base production plan with reduced mill throughput to conform to the release of ore from the block caves. The open pit mine plan is further adjusted to provide a uniform feed tonnage at the reduced rates.
16.2.4 | Open Pit Mine Planning 3D Block Model |
Three of the four MineSight 3DBMs as described in Section 14.0 of this PFS were updated since the 2016 PFS was issued. Only the Mitchell block model remains unchanged. The effect of those updates has been verified to not be material with respect to open pit designs and associated reserve tonnes and grades that were reported in 2016. As such, the open pit designs and reserves of the 2016 PFS can now be deemed as being based on the Resource Model described in Section 14.0 of this PFS.
The block heights represent a suitable bench height for large-scale mining shovels, and the block dimension are suitably sized for long-range planning.
Net Smelter Return
NSR per tonne (net of off-site concentrate treatment and smelter charges and including on-site mill recovery) is estimated for each block and is used as a cut-off item for break-even ore/waste selection, as well as for the grade bins used to optimize cash flow in the open pit production scheduling. It is also used for the underground mine planning as described in Section 16.3.
NSR is estimated using net smelter price (NSP) and process recovery as shown in the equation below. The NSP is based on base case metal prices; US dollar exchange rate; and typical off-site losses, transportation, smelting, and refining charges. The terms of a final smelter schedule will be negotiated during the course of the mine development. The major smelter terms used to estimate NSP are specified in Table 16.1, not including minor terms for deductions/losses, payables, price participation, etc.
Where:
– | Cu = copper grade (%) from the CUIDW 3DBM item | |
– | Au = gold grade (g/t) from the AUIDW 3DBM item | |
– | Mo = molybdenum grade (ppm) from the MOIDW 3DBM item | |
– | Ag = silver grade (g/t) from the AGIDW 3DBM item | |
– | RecCu = copper recovery (%) |
Seabridge Gold Inc. | 16-2 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
– | RecAu = gold recovery (%) | |
– | RecMo = molybdenum recovery (%) | |
– | RecAg = silver recovery (%) | |
– | NSPCu = net smelter price for copper (Cdn$/lb) | |
– | NSPAu = net smelter price for gold (Cdn$/g) | |
– | NSPMo = net smelter price for molybdenum (Cdn$/lb) | |
– | NSPAg = net smelter price for silver (Cdn$/g) |
Table 16.1 Major Smelter Terms Used in the NSR Calculation
Amount | Unit | |
Copper Concentrate | ||
Smelting | 75 | US$/dmt |
Au Refining | 8.00 | US$/oz |
Ag Refining | 0.50 | US$/oz |
Off-site Costs | 236 | Cdn$/wmt |
Moly Concentrate | ||
Roasting | 2.00 | US$/lb |
Other Off-site Costs | 5,298 | Cdn$/wmt |
Gold Dore | ||
Au Refining + Transport | 2.00 | US$/oz |
Copper-to-gold ratio in mill feed and estimated concentrate grades varies by KSM mining area. Off-site costs and NSPs are therefore different for each mining area. The metal prices and resultant NSPs used at this early stage of the study are shown by pit area in Table 16.2 and Table 16.3.
Table 16.2 Metal Prices for Reserve NSR Calculation
Metal Price
(US$) |
|
Cu | 2.70/lb |
Au | 1,200/oz |
Ag | 17.50/oz |
Mo | 9.70/lb |
Exchange Rate (US$:Cdn$) | 0.83 |
Table 16.3 Estimated NSP by Mining Area
Cu NSP
(Cdn$/lb) |
Au NSP
(Cdn$/g) |
Ag NSP
(Cdn$/g) |
Mo NSP
(Cdn$/lb) |
|
Mitchell | 2.82 | 41.6 | 0.551 | 6.5 |
Kerr | 2.68 | 40.7 | 0.529 | 6.5 |
Iron Cap | 2.82 | 41.6 | 0.551 | 6.5 |
Sulphurets | 2.82 | 41.6 | 0.551 | 6.5 |
Seabridge Gold Inc. | 16-3 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Metallurgical recoveries used for the NSR calculation are based on test work conducted by G&T and evaluated by Tetra Tech and are described in Section 13.0.
Mining Loss and Dilution
The 2016 PFS involves a large gold-copper porphyry deposit and the orebody occurs relatively continuously within the cut-off grade shells. The pits will be mined with large shovels and trucks at an ore mining rate of 130,000 t/d. As is typical of large porphyries, blast hole assays will be used to determine the waste/ore boundaries for material designations on the pit bench for daily operations.
The Mineral Reserves used for scheduling are calculated from grades in the 3DBM using detailed pit designs with the appropriate mining recoveries and dilutions applied. The recoveries and dilutions convert the in situ ore tonnages into ROM delivered tonnage to the mill. The ROM delivered tonnage (i.e., what the mill will actually “see”) is used to determine the appropriate production schedule.
There are three main parts to recovery and dilution:
● | dilution of waste into ore where separate ore and waste blasts are not possible |
● | loss of ore into waste where separate ore and waste blasts are not possible |
● | general mining losses and dilution due to handling (haul back in truck boxes, stockpile floor losses, etc.) |
In addition to the whole block dilution and the general mining losses and dilution, allowance is made for the contacts between ore and waste on the mining bench as defined by the NSR cut-off. This is affected by the size of the ore areas on the bench and the relative amount of edges. On a block-by-block basis, this is determined by the number of waste neighbours an ore block has or vice versa for waste. For this 2016 PFS, the Mitchell area has more massive ore zones on a bench than the other areas; therefore, contact dilution for this area is less. For this 2016 PFS, MMTS has estimated a mining loss and dilution factor that varies by pit area. Mining loss and dilution assumptions by pit area are provided in Section 15.0.
Since the dilution material on the contact edge of the blocks described above is mineralized, it will have some grade value. The dilution grades are estimated by determining the grades of the envelope of waste in contact with ore blocks inside the pit delineated area. These dilution grades are estimated by statistical analysis of grades in blocks with NSR less than the cut-off NSR. The dilution grades are shown in Section 15.0.
16.2.5 | Pit Slope Design Angles |
Overview
BGC has provided open pit slope design parameters for the three proposed open pits of the KSM 2016 PFS: Kerr, Sulphurets, and Mitchell. The design parameters are based on geotechnical site investigations, available local and regional geological data, and well-established geotechnical design methods used to estimate the 2016 PFS design pit slope angles.
Seabridge Gold Inc. | 16-4 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
BGC has identified geotechnical rock mass units associated with the primary rock and alteration types, based on the results of the site investigation and geological interpretations by Seabridge. Major geological structures (faults and foliation) have been included in the geotechnical slope stability analyses for each pit. Slope stability analyses were conducted using industry standard limit-equilibrium software, finite element analysis software, and in-house proprietary BGC tools.
BGC completed hydrogeological studies for each of the proposed pits, and numerical simulations of pit dewatering/depressurization have been carried out. BGC interpreted hydrostratigraphic units, estimated hydraulic conductivity and storage parameter values, and formulated a conceptual hydrogeologic model for the study area. The conceptual model was used as the basis for developing a numerical hydrogeologic model. The calibrated numerical model was used to evaluate the effort required to depressurize the open pit slopes to satisfy geotechnical constraints identified in the open pit slope designs. Preliminary dewatering/depressurization plans, including the number of vertical wells, horizontal drains, and the extraction rates required to achieve sufficient depressurization of the rock mass were developed to support the costing study. In addition, the need for a dewatering adit and associated drainage gallery was identified and simulated to achieve the depressurization targets of the upper north slope of the Mitchell pit.
BGC reviewed the proposed pit areas and surrounding terrain for potential geohazards, including the identification of snow avalanche paths and potential landslides, utilizing aerial photographs and satellite imagery. BGC completed ground-truthing of potential geohazards; the preliminary design of mitigation structures were completed by those responsible for the various 2016 PFS facilities at risk from the identified geohazards.
Mitchell Pit Design
The proposed Mitchell pit will be located within a glacially modified valley and targets a mineral deposit located in the valley floor, resulting in 1,200 m high ultimate slopes. This scale of the Mitchell pit north and south slope heights will rival some currently operating, very mature pits elsewhere in the Americas.
A multi-component site investigation program was completed to provide data for the Mitchell pit design work. Approximately 4,100 m of geotechnical drilling was completed, distributed over 10 core holes. BGC geotechnically logged the holes. Optical and acoustic televiewer surveys were completed in each hole to provide geological discontinuity orientations for rock slope design. Packer testing was undertaken in each hole, and vibrating wire piezometers were installed. Photogrammetric mapping of sections of the north and south valley walls was completed to provide additional data on the rock mass fabric of the study area.
Seabridge Gold Inc. | 16-5 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
A laboratory testing program was completed, consisting of the following tests:
● | uniaxial compressive strength (16 tests) |
● | Brazilian tensile strength (31 tests) |
● | small scale direct shear testing (8 tests) |
● | grain size and index testing (4 tests) |
● | specific gravity (44 tests). |
An appropriate quantity of quality data was collected to characterize the geological units of the study area and support PFS-level slope designs.
The structural geology of the Mitchell study area is defined by faults, foliation, and rock mass fabric (joints, etc.). In the Mitchell area the major faults are the Mitchell and Sulphurets thrust faults and the Brucejack fault. The proposed Mitchell pit has been divided into four geotechnical domains, based on the different structural geology fabrics in the area; discontinuity sets and geotechnical units for each domain are identified for use in the slope designs. Design sectors are based on the anticipated main orientations of the proposed pit walls, as determined from previous pit optimization studies.
Recommended inter-ramp slope angles vary from 34° to 54° based on wall orientation, overall wall height, geotechnical domain, and controls on slope stability. Inter-ramp slope heights are limited to 150 m, after which a geotechnical berm (or ramp) with a minimum width of 20 m is required. The inter-ramp height limits and geotechnical berms provide flexibility in the mine plan to mitigate potential slope instability; access for slope monitoring installations; and working space for in-pit wells, drains, and other water management infrastructure. All final pit slopes are assumed to be excavated using controlled blasting. Depressurization of the proposed pit slopes requires a combination of vertical wells, horizontal drains, and a dewatering adit with drainage galleries. The east and west overall slopes of the proposed Mitchell pit are within the range of slope heights that have been achieved in other porphyry metal mines in the world.
Sulphurets Pit Design
The proposed Sulphurets pit will be located on a glacially modified ridge between the Mitchell and Sulphurets valleys. The proposed mine plan would result in ultimate pit slopes with maximum heights of approximately 650 m, and a footprint of approximately 2 km x 1 km, with the long axis of the pit trending parallel to the strike of the STF.
A site investigation program including geotechnical drilling and hydrogeological testing was completed in 2010. Data from five geotechnical drill holes (consisting of approximately 1,950 m of drilling) was used to divide the Sulphurets Zone into three geotechnical domains: the hanging wall of the STF, the footwall of the STF, and an altered (crackled) zone associated with and defined by the STF. Additional joint and bedding sets have also been identified.
Seabridge Gold Inc. | 16-6 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Laboratory testing of core samples from the completed geotechnical drilling included:
● | uniaxial compressive strength (13 tests) |
● | Brazilian tensile strength (20 tests) |
● | small scale direct shear tests of natural discontinuities (5 tests) |
● | index testing of discontinuity infilling material (3 tests). |
The rocks of the Sulphurets Zone are typically moderately strong when weathered and strong when fresh. The RQD of the rocks of the Sulphurets Zone varies from fair to good, generally increasing in quality with depth below surface or distance from the STF.
The slope designs assume final walls will be excavated using controlled blasting, consistent with the approach proposed for the Mitchell pit. The recommended inter-ramp slope angles vary from 36° to 50° based on wall orientation, overall wall height, rock mass quality, and structural controls on slope stability. Inter-ramp slope heights are limited to 150 m after which a geotechnical berm (or ramp) with a minimum width of 20 m is required. Depressurization of the pit slopes is required and should be achievable with a combination of vertical wells and horizontal drains.
Kerr Pit Design
The proposed Kerr open pit is located on the south side of the Sulphurets Valley near the height of land and above the Sulphurets Glacier. The proposed mine plan will result in ultimate pit slopes approximately 600 m high, with a proposed pit footprint of approximately 2 km x 0.5 km.
A site investigation program including four geotechnical drill holes (consisting of approximately 1,500 m of drilling) and hydrogeological testing was completed in 2010. Data from the site investigation was used to divide the Kerr Zone into two geotechnical domains: a central altered zone and a surrounding unaltered zone; both are composed primarily of volcanic rocks. The structural geology of the Kerr Zone includes sets of west and east dipping normal faults (dipping greater than 60°) as well as bedding and joints.
Laboratory testing of core samples from the geotechnical drilling included:
● | uniaxial compressive strength (10 tests) |
● | Brazilian tensile strength (14 tests) |
● | small scale direct shear tests of natural discontinuities (4 tests) |
● | index testing of discontinuity infilling material (3 tests). |
The rocks of the altered zone are typically medium-strong but are highly fractured with poor RQD values. The rocks of the unaltered zone are strong to very strong, with good to excellent RQD values.
The slope designs assume that final walls will be excavated using controlled blasting. The recommended inter-ramp slope angles vary from 34° to 50°; based on overall wall height, wall azimuth, rock mass quality, and geological structures. Inter-ramp slope heights are limited to 150 m after which a geotechnical berm (or ramp) with a minimum width of 20 m is required. Depressurization of the pit slopes is required and should be achievable with a combination of vertical wells and horizontal drains.
Seabridge Gold Inc. | 16-7 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Slope Design Implementation
Achieving the proposed design criteria will require depressurization of the pit walls through the use of vertical wells and horizontal drains. Geological structures may affect bench and inter-ramp scale slope stability, and therefore, depressurization of these structures will be required.
Based on groundwater modelling results, approximately 76 in-pit wells will be required over the life of mine for the Mitchell pit. The total drilling length for the vertical wells is estimated to be approximately 15,200 m. In addition, a 3.5 km adit and drainage gallery will be required for the Mitchell pit north wall, and approximately 876 km of horizontal drains will be required to aid in depressurization of the pit slopes over the mine life. The average annual groundwater extraction rate for Mitchell pit depressurization measures is estimated to be approximately 12,600 m3/d throughout the life of the pit.
The average annual groundwater extraction rate for the Kerr pit depressurization measures is estimated to be approximately 1,300 m3/d. Approximately 36 vertical wells with a total drilling length of 7,200 m will be required throughout the life of the pit. In addition, it is estimated that approximately 110 km of horizontal drains will be required to aid in depressurization of the pit slopes over the life of the pit.
The average annual groundwater extraction rate for the Sulphurets pit depressurization measures is estimated to be 1,100 m3/d. Approximately 34 vertical wells with a total drilling length of 6,800 m will be required throughout the life of the pit. In addition, it is estimated that approximately 187 km of horizontal drains will be required to aid in depressurization of the pit slopes over the life of the pit.
Further characterization of the hydraulic properties of the bedrock at the feasibility stage and dewatering and depressurization response must be monitored throughout mining operations to determine if targets are being met.
Monitoring of pit slope displacements at various scales will be required. Inter-ramp and overall scale slopes should be monitored for deformations. The slope deformation monitoring system designed for the Mitchell pit will meet or exceed the size and complexity of those systems currently in operation at other large open pits elsewhere. The monitoring system should include multiple robotic-theodolites and survey prisms, mobile slope stability radar units, slope inclinometers, piezometers, and extensometers. The system would be computerized and use radio telemetry or a similar technology to provide real-time data to on-site geotechnical and mining staff. Similar monitoring systems would also be required for the Sulphurets and Kerr pits; the requirements of those systems would be scaled according to the proposed wall heights for those pits.
It will be important to manage geological hazards during mining operations. Additional engineered structures adjacent to the pit, or modifications to the pit slope geometry, may be required to mitigate the risk of snow avalanches. In addition, the 2016 PFS area has been recently de-glaciated and large-scale slope deformation features have been identified in the Mitchell and Sulphurets valleys.
Seabridge Gold Inc. | 16-8 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Nine large landslides in the study area will require management during construction and operations. Conceptual management plans detailing monitoring and mitigation measures were prepared as part of the 2016 PFS. Of particular note with respect to the open pits are: the Snowfield Landslide situated on the south slope of the Mitchell Valley and east of the Mitchell open pit, and the Kerr landslide situated on the south slope of the Sulphurets Valley and below the elevation of the proposed Kerr open pit.
The overall landslide management plan for the 2016 PFS uses a risk-based approach to determine the level of monitoring required for each landslide. The management plan for the Snowfield Landslide is comprehensive due to its proximity to the Mitchell open pit. The plan includes surface and subsurface deformation monitoring, surface water management, pumping wells, and a depressurization adit.
16.2.6 | Economic Pit Limits, Pit Designs |
Pit Optimization Method
The economic pit limit is selected after evaluating Lerchs-Grossmann (LG) pit cases.
The assessment is carried out by generating sets of LG pit shells by varying revenue assumptions to test the deposit’s geometric/topographic and pit slope sensitivity.
The ultimate pit limit is typically determined by estimating the pit size where an incremental increase in-pit size does not significantly increase the pit resource. The selected pit limit is chosen where the economic return starts to significantly drop off. Economics of the selected pit limits are also tested to determine that they are economically viable.
LG Pit Assumptions
Inputs to the updated LG pit limit assessment shown in Table 16.4 are based on the previous PFS studies as a starting point for the 2016 design work.
Table 16.4 LG Pit Limit Primary Assumptions
Assumption | Value |
Mining Cost | Cdn$1.90/t |
Process, G&A, Site Services, Water Treatment | Cdn$9.00/t |
Process Recoveries | See Section 17.0 |
Pit Slope Angle | Variable See Section 16.2.5 |
Metal Prices | See Table 16.2 |
LG pits are generated by varying prices in the range from 30% to 150% of the base NSR.
LG Economic Pit Limits
Pit shell cases are created by varying the input LG prices. Figure 16.1 to Figure 16.3 summarize the revenue sensitivity cases for the Mitchell, Sulphurets, and Kerr pits, respectively.
Seabridge Gold Inc. | 16-9 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
The potential economic pit limits are shown for each mining area where inflection points occur, where an incremental increase in-pit size does not significantly increase the pit resource, signifying where an incremental increase in the pit resource will only result in marginal economic return.
In the Sulphurets pit area, the inflection point represents the significant potential economic pit limits and is selected.
The selected economic pit limits for Mitchell and Kerr are smaller than the potential pit limit for the following reasons.
Seabridge’s objective to reduce open pit waste mined has been achieved by selecting for Mitchell, a pit limit with 40% less mill feed than the potential economic pit limit. Waste mined in the selected pit limit is 3.0 Bt less than the potential economic pit limit leaving the lower material for inclusion in the underground mine plan below the pit.
Figure 16.1 Mitchell Sensitivity of Ore Tonnes to Pit Size
Source: MMTS, 2016
Seabridge Gold Inc. | 16-10 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 16.2 Sulphurets Sensitivity of Ore Tonnes to Pit Size
Source: MMTS, 2016
Figure 16.3 Kerr Sensitivity of Ore Tonnes to Pit Slope and Pit Size
Source: MMTS, 2016
Seabridge Gold Inc. | 16-11 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
For Kerr the pit limit has been selected for a pit size to ensure that waste placement backfilled into Sulphurets pit does not exceed the available capacity as described in Rescan (2013).
The selected open pit limits are summarized below:
● | Mitchell – open pit/underground: 60% Price Case |
● | Sulphurets – inflection pit case: 90% Price Case |
● | Kerr – inflection pit case: 75% Price Case. |
A plan view and north-south section views of the LG pits for the open pit mining areas are shown in Figure 16.4 through Figure 16.7.
Figure 16.4 Plan View of the KSM LG Pit Limits
Source: MMTS, 2016
Seabridge Gold Inc. | 16-12 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 16.5 Mitchell Open/Underground Pit and Economic Pit Limit – North-South Section at East 422950, Viewed from the East
Note: NSR values are in Cdn$ per tonne
Figure 16.6 Sulphurets Economic Pit Limit – North-South Section at East 421725, Viewed from the East
Note: NSR values are in Cdn$ per tonne
Seabridge Gold Inc. | 16-13 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 16.7 Kerr Economic Pit Limit – East-West Section at North 6258800, Viewed from the South
Note: NSR values are in Cdn$ per tonne.
16.2.7 | Detailed Pit Designs |
PFS-level pit designs demonstrate the viability of accessing and open pit mining the Measured and Indicated Mineral Resources at the KSM site. Pit designs use the selected LG pit limits as guides for estimated geotechnical parameters, suitable road widths, and minimum mining widths based on efficient operation for the size of mining equipment chosen for the 2016 PFS.
Haul Road Widths
Haul road widths are designed to provide safe, efficient haulage and to comply with the BC Mines Regulations’ minimum width specifications and safe operating practice.
Design Standards
Detailed design parameters for pits and RSFs are provided by BGC and KCB, respectively, according to their geotechnical testing and evaluations (Sections 16.2.5 and 18.2).
Minimum Mining Width
A minimum mining width between pit phases is allocated to maintain a suitable mining platform for efficient mining operations. This is established based on equipment size and operating characteristics. For this study, the minimum mining width generally conforms to 50 m, which provides sufficient room for 2-sided truck loading but, due to the configuration of merging pits, it is sometimes less.
Seabridge Gold Inc. | 16-14 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Access Considerations
As stated in the design criteria summary, haul road widths are dictated by equipment size. One-way haul roads must have a travel surface more than twice the width of the widest haul vehicle. Two-way roads require a running surface more than three times the width of the widest vehicle planned to use the road. All roads have a maximum grade of 8% suitable for mines with winter conditions.
Variable Berm Width
Pit designs for KSM are designed honouring overall PSAs, a nominal bench face angle (60° to 70°) and variable safety berm widths with a minimum 8 m width. Due to the low overall PSAs and double benching between berms, berm widths are generally greater than 15 m. Where haul roads intersect designed safety benches, the haul road width is counted towards the safety berm width for the purpose of calculating the maximum overall PSA.
Bench Height
The KSM pit designs are based on the digging reach of the large shovels (15 m operating bench) with double benching between high wall berms; therefore, the berms are separated vertically by 30 m. Single benching will be employed, if required, to maximize ore recovery and maintain the safety berm sequence as warranted.
LG Phase Selection
The LG selected pit cases discussed previously are used to evaluate alternatives for determining the economic pit limit and the optimal push-backs or phases before commencing detailed design work. LG pits provide a geometrical guide to detailed pit designs. Among the details to be added are roads and bench access, the removal of impractical mining areas with a width less than the minimum, and to ensure the pit slopes meet the detailed geotechnical recommendations.
There are smaller pit shells within the economic pit limits that have higher economic margins, due to their lower strip ratios or better grades than the full economic pit limit. Mining these pits as phases from higher to lower margins maximizes revenue and minimizes mining cost at the start of mining operations.
The description of the detailed pit designs and phases in this section uses the following naming conventions:
● | The letters M, S, and K signify Mitchell, Sulphurets, and Kerr, respectively. |
● | The digit signifies the pit phase number. |
● | A suffix of ‘i’ indicates that the reserve tonnage for the phase is incremental from the previous phase. If there is no ‘i’ specified, it is cumulative within the pit, up to the phase indicated. |
Seabridge Gold Inc. | 16-15 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Mitchell Pits
For Mitchell pit, the LG “selected” pit limit as described above has been used as the economic pit limit guide for the detailed design. Mitchell pit has five incremental phases. Pit phase M1 enables the mine to have sufficient exposed ore with a six month pre-strip period. Phases M2i and M3i mine south and north respectively to provide low strip ratio ore to the mill during the pay-back period. The final two pit phases, M4i and M5i, are high strip ratio that mine to the ultimate pit limit in the south and then in the north.
The Mitchell pit phases have been designed to mine vertically through the Snowfield Landslide on the southeast side of the pit and not undermine it.
A plan view of the Mitchell pit phases is shown in Figure 16.8.
Figure 16.8 Plan View of Mitchell Pit Phases
Sulphurets Pits
The mine plan for the Sulphurets area includes 4 mining phases, which are designed using the LG “potential” economic pit limit as the ultimate pit limit guide.
S1 is a quarry that provides non-potentially acid generating (NPAG) monzonite for construction of the WSD during the pre-production period. Some of the S1 pit is outside the LG shell pit limit guide in order to provide sufficient NPAG for construction rock. S2i and S3i are low strip ratio starter pits at Sulphurets. S4i is the final Sulphurets pushback.
A plan view of the Sulphurets pit phases is shown in Figure 16.9.
Seabridge Gold Inc. | 16-16 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 16.9 Plan View of Sulphurets Pit Phases
Kerr Pit
The Kerr deposit is mined within the LG selected pit limit, as described above, with two pit phases: a starter pit K1 and an ultimate pit K2. All ore and waste is hauled to a primary crusher on the east side of the pit and conveyed to the Mitchell Valley using a rope conveyor, across Sulphurets valley and then onto a tunnel conveyor through the Sulphurets ridge (SMCT) to the OPC.
Initial access to the Kerr pit is established with a service road built from the bottom of Sulphurets Valley to the east side of the Kerr pit (where the crusher will be located) at the 1,460 m elevation. Access to the highest benches of Kerr will be established with a small service road, and the upper benches will be dozed down to approximately 1,800 m where haul truck access can be established to the crusher. A plan view of the Kerr pit phases is shown in Figure 16.10.
Seabridge Gold Inc. | 16-17 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 16.10 Plan View of Kerr Pit Phases
16.2.8 | Open Pit Mine Plan |
LOM Open Pit Production Schedule
The open pit mine production schedule is developed with MS-SP, a comprehensive long-range schedule optimization tool for open pit mines used to produce a LOM schedule that increases the NPV of the PFS.
The open pit sequence is scheduled to optimize revenues and open pit development costs. The underground mining production schedule discussed in Section 16.3 is generated based on the development requirements for each mining area, the size, and capacity of the individual Mitchell and Iron Cap block caves and then integrated into the total property production schedule. The ore production from each of the open pit and underground mining components are inserted where they provide the best contribution to the PFS economics. After inserting the underground ore production into the LOM sequence, the open pit ore targets are then adjusted to meet the mill capacity.
At start-up, all production comes from open pit sources, producing higher grades from lower cost areas (both operating and capital). In the later years of the schedule, the base ore production is from the underground, from Mitchell first and then Iron Cap is phased in. After Year 35, the mill throughput rate is reduced to match the switch to continuous underground production, and the open pits are mined to supplement the ore tonnes produced from the block caves to meet the mill requirements and to improve overall head grades. In the final years of the production schedule, the stockpile accumulated during the open pit operations is used to augment the underground production. The combined LOM schedule, including open pit, underground, and stockpile reclaim, is presented in Section 16.4. The following describes the open pit sequencing to match the combined open pit underground mine plan.
Seabridge Gold Inc. | 16-18 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
In the open pit mine schedule, “Time 0” refers to the mill start date; full mill feed production capacity is expected in Year 2. The production schedule specifies:
● | pioneering: Year -6, -5, -4 |
● | pre-production: Year -3, -2, -1 |
● | first year of operations: Year 1 |
● | LOM operations: at full capacity Year 2 onward. |
Open Pit Mine Load and Haul Fleet Selection
The mine load and haul fleet are selected prior to production scheduling. Previous studies and similar projects in the area have shown that the lowest cost per tonne fleet of cable shovels and haul trucks that are currently being used for large hard rock open pit mines are the 100 t bucket class shovel matched with the 360 t truck. These unit sizes are proven in operating mines around the world. Diesel hydraulic shovels (85 t bucket class) are added to the fleet when a more mobile loading unit is needed. Suitable drill sizes (311 mm hole size) are chosen to match this size of truck/shovel fleet. The following performance and costs are estimated based on the use of these large-scale mining equipment.
Productivities of the selected equipment include shovel loading times and truck haul cycle estimates for multiple pit-to-destination combinations.
Schedule Criteria
In order to optimize the PFS NPV, grade bins have been specified (based on NSR block values); the MS-SP optimizer develops a cut-off grade strategy to increase the PFS NPV. This increases mill head grades, and therefore revenues, early in the production schedule. Pit/phase precedencies are specified based on the logical progression of phase geometry (no undermining) but also determined by the timing of water diversions, bench access issues, and RSF phase sequencing. Early Sulphurets waste production is initially based on WSD construction requirements and later based on RSF rock drain requirements. Kerr pit is mined after Sulphurets pit so that Kerr waste can be backfilled to the mined out Sulphurets pit.
Because of these complexities, each pit area is scheduled in MS-SP independently and then combined in a master LOM schedule.
The primary program objective in each period is to maximize the NPV. The MS-SP NPV calculation is guided by estimated operating and capital costs, process recoveries, and metal prices. Key production schedule assumptions are shown in Table 16.5.
Seabridge Gold Inc. | 16-19 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Table 16.5 Production Schedule Assumptions
Assumption | Value |
Operating Days Per Year | 355 |
Hours Per Day | 21 |
Daily Mill Throughput | 130,000 t/d |
Haul Truck Speed Limit | 50 km/h |
Haul Truck Operator Efficiency | 90% |
Haul Truck Operating Efficiency | 85% |
Dump and Manoeuvre Time | 1.5 min |
Shovel Loading Time | 35 s/pass |
Shovel Spot and Wait Time | 10 s |
Shovel Operator Efficiency | 84% |
Shovel Operating Efficiency | 85% |
Allowance has been made for the severe snowstorms or when poor visibility requires the mine to partially or completely shut down. The cumulative lost production hours are applied as lost days in the schedule.
Cut-off Grade Optimization
The pit phase designs and sequencing are typically from higher grades to lower, to mine the higher mill feed grades early in the schedule and thereby increase the PFS revenues in the earlier years. This can be further enhanced by stockpiling low and mid-grade. The stockpiled material is then milled at the end of the production schedule. However, stockpiling also results in increased mining cost per tonne milled. Additionally, oxidation can cause significant metallurgical recovery loss in the stockpile. At some point, the cost of mining more material and the recovery loss will exceed the incremental benefit from the higher grade milled. A variable cut-off grade strategy has been applied for the KSM production schedule to improve the project economics by mining the best grade ore first, varying the stockpiling, and smoothing out the haul fleet to optimize the NPV.
Rock Storage Facilities
The RSFs are located as close to the mining areas as possible. Mitchell and Sulphurets waste is placed in Mitchell and McTagg RSFs. Kerr waste rock is backfilled into Sulphurets pit.
Further details on the RSF design are available in Section 18.0.
Construction Methods
Several different construction methods will be used for waste placement: top-down, bottom-up, and wraparounds. Top-down platform heights are limited to a maximum height of 300 m. Bottom-up lifts are 30 m to 50 m high, or less if geotechnically required. Wraparounds are built onto the face of an existing RSF, creating a series of terraces to facilitate intermediate haul roads and lower the overall slope angle of high dumps, which will reduce the end of mine closure costs.
Seabridge Gold Inc. | 16-20 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Foundation Preparation
Design work for RSF foundation preparation will be performed as required at the feasibility-level design stage. Prior to mine development, soil will be salvaged from the footprint area where soil is suitable for reclamation purposes. Soils will generally not be salvaged on slopes steeper than 26° due to practical limitations on equipment access and operator safety. Soils salvaged from the RSF footprints will be stockpiled in the Ted Morris Valley.
The waste in the valley bottoms will be placed in low height lifts to confine and consolidate weaker foundation material. If required, loose tills and clays will be removed. Once the foundation is prepared, the basal drain is placed on top at the required lift height. The basal drain requirements are described in Rescan (2013).
RSF Monitoring and Planning
The long-term operation of the RSFs will be similar to that of the large, steep-terrain RSFs that have been in operation for many years in southeast BC Rocky Mountain coal mines. These operations involve high-relief RSF phases with clear dumping in single lifts of up to 400 m. Clear dumping is a technique whereby truck loads are dumped directly over the crest of the dump face; the load is not dumped short and then pushed over the edge. The clear dumping technique maintains a stable dump platform but requires well-established monitoring and operating practices. Foundation preparation also needs to be assured.
RSF Access Roads
Pioneering access to each pit and subsequent phases use roads with a maximum 15% grade; these are constructed using balanced cut and fill wherever possible. Pioneering roads are 10 m wide and enable major mining equipment to reach the top benches of each pit phase and start mining. These are built for pit access and not for hauling. After the pioneering road is established to the top benches of each pit phase, bench waste from the upper portions of each pit phase is used to fill full-width haul roads at a maximum gradient of 8% at the 38 m double lane width, to connect with permanent surface roads and high wall roads in the long-term road network. This road network connects the mining areas with the primary crusher and stockpile areas for ore and the RSF areas for waste.
As described earlier, the terraced RSFs on the south side of the Mitchell Valley provide level access to the south Mitchell Valley RSF platforms.
Final RSF Configuration
The RSFs for the PFS will have overall slope angles of 26° to 30°. The final post-closure configuration will be adapted in accordance with the closure plan as identified within Rescan (2013) and described in Section 20.7. Costs for this work are included during the later years of the operation, when the waste strip ratio drops to low levels and ancillary equipment then becomes available for other duties.
Seabridge Gold Inc. | 16-21 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Low-grade ROM Stockpile
Lower-grade ore is stockpiled throughout the mining schedule to follow the cut-off grade strategy, and then is reclaimed in later years. This increases the grade of the ore feed to the plant in the early years of the schedule but also is used to even out the waste mining requirements as required during periods of high pre-stripping for some of the pit phases. The low-grade ore stockpile is placed to the west of the Mitchell OPC. Provision has been made for an HDPE pipeline diversion around the surface of the stockpile, which can be moved as required.
Open Pit Mine Pre-production Detail
Development and pre-production activities include the following:
● | expose sufficient ore for start-up |
● | establish mining areas that will support the equipment required to achieve ore production and annual mill feed requirements on a sustainable basis |
● | provide material required for construction in the mine area |
● | in early development, the mining fleet will excavate colluvium from a borrow source in the Mitchell Valley to provide construction fill for the Mitchell OPC |
● | during pre-production, Mitchell pit phase M1 is mined to 885 m and M2 is mined to 1,290 m in the Mitchell Valley; and Sulphurets pit phase S3 is mined to an elevation of 1,485 m |
● | development and pre-production must be completed by the end of Year -1. This will expose sufficient ore for commissioning and to sustain full mill production rate of 130,000 t/d of mill feed after that. The mine layout at the end of pre-production is shown in Figure 16.11. |
16.2.9 | Open Pit Production |
Year 1 to 20 – Open Pit Mining
The following is a summary of mining activity in Years 1 to 5:
● | Mining in Year 1 to 5 focuses on delivering the grade required to payback initial capital |
● | All Mitchell waste and Sulphurets waste material is placed in the Mitchell RSF |
● | Sulphurets construction rock (NPAG monzonite) waste is hauled to be used for the basal and selenium drains beneath the Mitchell/McTagg RSF |
● | Mitchell and Sulphurets ore is hauled directly to the Mitchell primary crushers. From Year 2, the Sulphurets ore is hauled to the Sulphurets crusher and crushed ore is then conveyed to the OPC through a tunnel |
● | An ROM ore stockpile is built in the area to west of the Mitchell OPC |
● | The Mitchell RSF is built in lifts at an overall slope of 2:1 with an access road in the final face. |
Seabridge Gold Inc. | 16-22 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
The open pit mine layout at the end of Year 5 is presented in Figure 16.12.
The following is a summary of mining activity in Years 6 to 20:
● | By Year 6, the M3 and S3 phases are mined out and mining begins on the higher strip ratio phases of Mitchell and Sulphurets |
● | Stockpile material is reclaimed to supplement mill feed during periods where mining is limited by the large volume of waste pre-stripping or vertical advance rate |
● | By Year 10, the Mitchell RSF is full and waste placement begins in the McTagg RSF |
● | Mitchell and Sulphurets pits are mined out by the end of Year 20. All waste is placed on the McTagg RSF. |
Year 20 to 30 – Open Pit Production and Transition to Mitchell Underground Mining
The open pit mine production sequence is adjusted to meet plant feed requirements as the Mitchell block cave mine is brought online. As discussed in more detail in Section 16.3, the Mitchell block cave mine is ramped up to full production in this time interval.
Kerr open pit is mined out by Year 30. Waste from Kerr pit is conveyed to Sulphurets and backfilled into the mined out Sulphurets pit. Ore from Kerr is conveyed to the OPC.
Direct mining from the open pits is completed by the end of Year 30.
Year 30 to 53 – Stockpile Reclaim to Supplement Underground Mining
Open pit mining after Year 30 is limited to stockpile reclaim for supplementing Mitchell and Iron Cap block cave production (see Section 16.3).
Once the stockpile is removed, a closure channel is established around the Mitchell RSF by placing moraine material and NPAG riprap on berms along the north and west toes of the Mitchell RSF. The open pit mine layout at LOM is shown in Figure 16.13.
Seabridge Gold Inc. | 16-23 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 16.11 End of Pre-production (Year -1)
Source: MMTS (2016)
Seabridge Gold Inc. | 16-24 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 16.12 End of Year 5
Source: MMTS (2016)
Seabridge Gold Inc. | 16-25 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 16.13 Open Pit Life of Mine
Source: MMTS (2016)
Seabridge Gold Inc. | 16-26 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
16.2.10 | Open Pit Mine Operations |
The open pit and underground operations are considered as separate operations in this study, with their own facilities and management, technical, and operating personnel. Future detailed planning should be able to reduce costs by integrating some of the support services, staff and facilities. The following description is for the open pit operations. Underground operations details are provided in Section 16.3.
KSM open pit mining operations will employ bulk mining methods and large capacity equipment. Services and support are well established in BC and in the local area for this kind of operation.
The use of large-scale equipment will minimize unit operating costs, reduce the on-site labour requirement of a remote site, and dilute the fixed overhead costs for the open pit operations.
Organization
Mine operations is organized into three areas: direct mining, mine maintenance, and general mine expense (GME).
In this study, direct mining and mine maintenance are planned as an owner-operated fleet with the equipment ownership and labour being directly under operations. It may be possible to contract out some of the direct mining activities under typical mine stripping contracts, and maintenance and repair contracts (MARC). For this study the mine will employ the blasting crew but, the supply and onsite manufacturing of blasting materials will be contracted out. All infrastructure required for the blasting supply contractor will be provided by the operations.
Direct Mining Activities – Open Pit
The direct mining area accounts for the drilling, blasting, loading, hauling, and pit maintenance activities in the mine.
Drilling
Areas will be prepared on the bench floor blast patterns in the in situ rock. Drill ramps will be dozed on original mountain side surfaces, between benches.
Blasthole drills will be fitted with GPS navigation and drill control systems to optimize drilling.
Diesel hydraulic and electric rotary drills (311 mm bit size) will be used for production drilling, both in ore and waste.
Diesel hydraulic percussive drills with a hole size of 6.5 inches (165 mm) will operate production benches for controlled blasting techniques on high wall rows, pioneering drilling during pre-production, and development of initial upper benches.
Seabridge Gold Inc. | 16-27 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Blasting
Powder Factor
An appropriate powder factor has been used to provide adequate fragmentation and digging conditions for the shovels. Similar large open pit projects in the KSM area use a powder factor of 0.32 kg/t for competent rock. Based on a blasting study by Orica, a power factor of 0.35 kg/t is being used. Future Feasibility Study planning can investigate further mine to mill performance with respect to blasting.
Explosives
A contract explosives supplier will provide blasting materials and technology. Due to the remote nature of the operation, an explosives manufacturing plant will be built on site when emulsion is required. For this study, the owner provides a serviced site and all facilities to the explosives contractor who manufactures and delivers the prescribed explosives to the blast holes and supplies all blasting accessories.
It is anticipated that production up to and including Year 1 will not require emulsion. After Year 1 it is assumed that half of the holes will use a 70/30 emulsion/ammonium nitrate-fuel oil (ANFO) mix explosive (“wet” product) and half of the holes will use a 35/65 emulsion/ANFO mix (“dry” product). Higher use of ANFO, and possible use of borehole liners to keep the ANFO dry, can be investigated in future studies to reduce blasting costs.
Blasting accessories will be stored in magazines adjacent to the mining areas suitably located to meet federal and provincial regulations and to avoid potential geohazards.
Explosives Loading
Loading of the explosives will be done with bulk explosives loading trucks provided by the explosives supplier. The trucks should be equipped with GPS guidance and should be able to receive automatic loading instructions for each hole from the engineering office. The GPS guidance will be a necessity to be compatible with stakeless drilling.
A smaller “goat” truck is needed for small development areas as well as for squaring-off blast patterns when the mine roads have been closed due to excessive snow fall. “Goat” trucks are similar to a logging skidder with high manoeuvrability and are a specific adaptation for open pit operations in mountainous and high snow fall areas.
Blast holes will be stemmed to avoid fly-rock and excessive air blasts. Crushed rock will be provided for stemming material and will be dumped adjacent to the blast pattern. A loader with a side dump bucket is included in the mine fleet to tram and dump the crush into the hole.
Blasting Operations
The blasting crew will comprise mine employees and will be on day shift only. The blasting crew will coordinate drilling and blasting activities to ensure a minimum of two weeks of broken material inventory is maintained for each shovel. Blasters will require hand-held GPS to identify holes for pattern tie-in as blast patterns will not be staked. A detonation system will be used that consists of electric cap initiation, detonating cord, surface delay connectors, non-electric single-delay caps, and boosters.
Seabridge Gold Inc. | 16-28 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Blasting assumptions are summarized in Table 16.6. These parameters are typical for other mines in the Western Canada and will be re-evaluated in the future with a detailed blasting study, using site-specific rock strength parameters.
Table 16.6 Blasting Assumptions
Blasting Pattern – Ore and Waste | Specifications |
Spacing | 8.5 m |
Burden | 8.5 m |
Hole Size | 12¼ inches |
311 mm | |
Explosive In-Hole Density | 1.25 g/cc |
Explosive Average Downhole Loading | 95.0 kg/m |
Bench Height | 15 m |
Collar | 6 m |
Loaded Column | 11 m |
Sub-drill | 2 m |
Charge per Hole | 1,046 kg/hole |
Rock SG | 2.77 t/m3 |
Yield per Hole | 3,002 t/hole |
Powder Factor | 0.35 kg/t |
Loading
Ore and waste will be defined in the blasted muck pile by the OCS. A fleet management system will assist in optimizing deployment and utilization of the mine fleet
Three 85 t dipper diesel hydraulic shovels and three 100-t dipper electric cable shovels have been selected as the primary digging units. The diesel hydraulic shovels are selected for flexibility and mobility in accessing the narrow top pit benches.
Minimum bench widths of 50 m are designed to ensure sufficient operating for double-sided loading of trucks at the shovels. Where single-sided loading will be necessary and reduced productivity for the shovel will be encountered, such as the upper benches of the pit phases ancillary equipment will be deployed to prepare the digging areas for higher shovel productivity. This can entail dozing small benches down slope to the next bench, trap dozing, and other dozing activities.
Hauling
Ore and waste will be hauled by 360 t off-highway haul trucks. Haul productivities have been estimated from pit centroids at each bench to designated dumping points for each time period.
Seabridge Gold Inc. | 16-29 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Pit Maintenance
Pit maintenance services include haul road maintenance, open pit mine dewatering, transporting operating supplies, relocating equipment, and snow removal.
Haul road maintenance is paramount to low haulage costs; dozer and grader hours have been allocated to maintain the haul road network throughout the LOM production schedule.
A fleet of ancillary service vehicles are allocated to install and service the in-pit sump pumps and the high wall horizontal drains. This includes connecting these pumps to the pit dewatering pipeline system. This crew will also service and supply mobile light plants.
A fleet of service equipment is allocated for summer season construction and will be used in winter for snow clearing and spreading crushed rock for traction control. This includes scrapers and loaders. The snow fleet will be manned by mine operations staff in normal winter conditions with operators taken from reduced activities such as dust control and summer field programs. During severe storms, personnel to operate the standby snow fleet will be drawn from truck and shovel operations as the long-haul fleets shut down. This will ensure priority fleets remain operating.
A rock crusher for road grading material is included.
Open Pit General Mine Expense Area
The GME area accounts for the supervision, safety, environment, and training for the direct mining activities as well as technical support from mine engineering and geology functions. Open pit mine operation supervision will extend down to the shift foreman level and trainers.
GME costs also include engineering consulting on an ongoing basis for specialty items, such as geotechnical and geo-hydrology expertise, and third-party reviews in the open pit mine area.
16.2.11 | Mine Closure and Reclamation |
Details on mine closure and reclamation are available in Section 20.7
16.2.12 | Open Pit Mine Equipment |
Mining equipment descriptions in this section provide general specifications so that dimensions and capacities can be determined from vendor specification documents.
Major Equipment
The production requirements for the major mining equipment over the LOM are summarized in Table 16.7. The current production schedule requires a maximum haulage fleet of 60 trucks over the LOM.
Seabridge Gold Inc. | 16-30 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Table 16.7 Major Equipment Requirements
Pre-
production |
Year
5 |
Year
10 |
Year
20 |
Maximum | |
Drilling | |||||
Primary Drill – 311 mm Electric Drill | 0 | 4 | 5 | 5 | 5 |
Primary Drill – 311 mm Diesel Hydraulic Drill | 2 | 3 | 3 | 1 | 3 |
High Wall Drill – 150 mm Diesel Hydraulic Drill | 4 | 4 | 4 | 4 | 4 |
Loading | |||||
Primary Shovel – 40 m3 Diesel Hydraulic Shovel | 1 | 2 | 3 | 3 | 3 |
Primary Shovel – 56 m3 Electric Cable Shovel | 0 | 3 | 3 | 3 | 3 |
Construction Shovel – 12 m3 | 2 | 0 | 0 | 0 | 2 |
Hauling | |||||
Haul Truck – 360 t | 15 | 37 | 60 | 58 | 60 |
Construction Haul Truck – 90 t | 14 | 0 | 0 | 0 | 14 |
Drilling Equipment
The primary production drilling will be carried out in ore and waste with electric rotary drills with a 311 mm hole size. The production drills will be fitted with GPS navigation and drill control systems to optimize drilling. Production drilling assumptions are listed in Table 16.8.
Table 16.8 Open Pit Production Drilling Assumptions
Production Drill –
Mineralized Material & Waste |
Electric
Rotary |
Diesel
Rotary |
Bench Height | 15 m | 15 m |
Subgrade | 2.0 m | 2.0 m |
Hole Size | 311 mm | 311 mm |
Penetration Rate | 40.0 m/h | 40.0 m/h |
Hole Depth | 18 m | 18 m |
Over Drill | 1.0m | 1.0 m |
Setup Time | 2.0 min | 2.0 min |
Drill Time | 27.0 min | 27.0 min |
Move Time | 2.0 min | 2.0 min |
Total Cycle Time | 31.0 min | 31.0 min |
Holes per Hour | 1.94 | 1.94 |
Re-drills | 6% | 6% |
A 150 mm diesel percussive drill is also specified for controlled blasting techniques on high wall rows in all pit phases, pioneering drilling during pre-production, and development of initial upper benches.
A detailed drill study is recommended for more advanced project studies to better determine the penetration rate that can be expected for the selected drills and the specific rock types that exist within the pit areas.
Seabridge Gold Inc. | 16-31 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Blasting Equipment and Facilities
A blast hole stemming unit will be required to load cuttings into the hole and stem the unloaded portion of the hole. This unit will be provided by the KSM operation. Blasting activities are detailed in Section 16.2.10.
Open Pit Loading and Hauling Equipment
The shovel-truck fleet selected for KSM is the 56 m3 dipper class of electric shovel, and the 360 t payload class of truck. A 40 m3 dipper class diesel hydraulic shovel is also required for difficult to access development benches and enables pre-production mining before power is established to the mine site. Loading and hauling is discussed in Section 16.2.10.
Open Pit Dewatering Equipment
The dewatering activities will include the following:
● | horizontal drain holes in bench faces |
● | sloped pit floors as required |
● | in-pit sumps |
● | vertical dewatering wells |
● | a dewatering tunnel behind the north high wall |
● | water collection system |
Pit water will be collected and transported to the WSF.
Open Pit Support Equipment
The mine support equipment fleet requirements are summarized in Table 16.9. The fleet size in Year 5 and Year 10 is shown as representative of the LOM requirement.
Table 16.9 Mine Support Equipment Fleet
Fleet | Function | Year 5 | Year 10 |
Hole Stemmer – 3 t | Blast Hole Stemmer | 2 | 2 |
Track Dozer – 430 kW | Shovel Support | 5 | 6 |
Rubber Tired Dozer – 350 kW | Pit Clean Up | 2 | 3 |
Fuel/Lube Truck | Shovel and Drill Fueling and Lube | 2 | 3 |
Wheel Loader Multipurpose – 14 t | Pit Clean Up | 2 | 3 |
Water Truck – 20,000 gal | Haul Roads Water Truck | 2 | 2 |
Track Dozer – 430 kW | Dump Maintenance | 3 | 3 |
Motor Grader – 400 kW | Road Grading | 4 | 4 |
Tire Manipulator | Tire Changes | 3 | 3 |
Seabridge Gold Inc. | 16-32 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Open Pit Ancillary Equipment
The mine ancillary equipment fleet is listed in Table 16.10. The fleet sizes in Year 5 and Year 10 are shown as representative of the LOM requirement.
Table 16.10 Open Pit Ancillary Equipment Fleet
Fleet | Function | Year 5 | Year 10 |
Track Dozer – 430 kW | Pit Support | 2 | 2 |
Float Tractor/Trailer – 189 t | Float Tractor and Trailer | 1 | 1 |
Hydraulic Excavator – 6 t | Utility Excavator | 2 | 2 |
Sump Pump – 1,400 gal/min | Pit Sump Dewatering | 6 | 6 |
Light Plant | Lighting Plant | 6 | 8 |
250 t Crane | Utility Crane | 2 | 2 |
Crew Cab | Supervision and Crew Transportation | 18 | 18 |
Ambulance | Ambulance | 1 | 1 |
Hydraulic Excavator – 4 t | Utility Excavator | 4 | 3 |
Mine Rescue Truck | Rescue Truck | 1 | 1 |
Crew Bus | Crew Bus | 5 | 5 |
Maintenance Truck – 1 t | Maintenance Truck | 5 | 5 |
Fire Truck | Fire Truck | 1 | 1 |
Screening & Crushing Plant – 12” max. | Road Crush and Stemmings | 1 | 1 |
Picker Truck | Maintenance + Overhauls | 2 | 2 |
Scraper – 37 t | Crush Haul for Winter Roads etc. | 5 | 5 |
Crane 40 t Hydraulic Extendable | Utility Crane | 2 | 2 |
Wheel Loader – 14 t | Crusher (Road Crush) Loader | 1 | 1 |
Snowcat | Winter Off Road Crew Transport | 6 | 6 |
40 t Crane | Utility Crane | 2 | 2 |
Forklift – 30 t | Forklift | 1 | 1 |
Forklift – 10 t | Forklift | 2 | 2 |
Service Truck | Service Truck | 5 | 5 |
Welding Truck | Welding Truck | 4 | 4 |
Powerline Truck | Powerline Maintenance | 2 | 2 |
Snow Fleet
All of the following snow fleet equipment is chosen to start operating during pre-production and continue to the end of mine life, unless otherwise noted.
● | Five scrapers with the ability to haul 37 t are included in the fleet. The scrapers are required to haul and spread crushed rock for traction control and remove snow from the haul roads and mine working areas as necessary. The scrapers are also used on occasion for small earthmoving jobs and reclamation projects outside of the snow season. |
● | One wheel loader with an approximately 14 t bucket to clear snow from the plant area and truck shop, as well as ancillary routes within the mine. The wheel loader is also used to load the cone crusher at the crushing and screening plant. |
● | Six snowcats to transport operators to equipment in a location that is inaccessible to the crew bus or vans because of heavy snowfall. |
Seabridge Gold Inc. | 16-33 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
The snow fleet has a low utilization as it is only required in winter. Other than the use of the scraper for summer construction projects and stockpiling road crush, operating the snow fleet equipment outside winter is not currently scheduled.
Open Pit Ancillary Facilities
Shops and Offices
In addition to providing an area for maintenance bays, tire shops, and a wash bay, the maintenance shop will also house:
● | a welding bay |
● | an electrical shop |
● | an ambulance |
● | a first aid room |
● | a first aid office |
● | a machine shop area |
● | a mine dry |
● | a warehouse |
● | offices for administration, mine supervision, and engineering/geology staff |
● | a lunchroom and foreman’s office. |
The recommended shop sizing for the open pit operations includes eight service bays, one welding bay, and three wash bays. This will accommodate the fleet for the LOM PFS production plan. The mine maintenance facility will also include a machine shop area, tool storage area, mine muster area, warehouse, and office complex. A separate tire bay facility will be required with an exterior heated pad to accommodate at least two trucks and a tire manipulator.
Seabridge Gold Inc. | 16-34 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
16.3 | Underground Mining Operations |
The Mitchell and Iron Cap block caves are located within the Mitchell Valley and are accessed by the MTT. Figure 16.14 shows a plan view of the block cave area and the relationship between the block caves, the MTT, and the North Pit Wall Depressurization Tunnel. A section view shows the same elements in Figure 16.15.
Figure 16.14 Plan View of the Mitchell and Iron Cap Block Cave Mines
Source: Golder, 2016
Seabridge Gold Inc. | 16-35 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 16.15 Section View of the Mitchell and Iron Cap Block Cave Mines (Looking North)
Source: Golder, 2016
16.3.1 | Underground Mine Design Inputs |
This subsection summarizes the block cave mine design inputs that are similar for both Mitchell and Iron Cap and includes a geotechnical review and caving analysis.
The quality of the rock mass at the Mitchell deposit is rated as good. No major structural features are identified that might influence the caving mechanism and the progression of the cave in any significant manner.
The Iron Cap deposit appears to be composed of strong, moderately fractured rock. Rock quality variations are most commonly attributed to variations in fracture frequency, as the strength of the rock mass does not vary significantly within the deposit. The fracture frequency is higher for Iron Cap than for the Mitchell deposit, resulting in a corresponding lower predicted median in situ block size of 2.5 m3, as compared to the Mitchell deposit. Several gaps in data are identified in the Iron Cap geotechnical and hydrogeological studies. These gaps will need to be addressed as part of future feasibility-level studies.
Caveability assessments for both the Iron Cap and Mitchell deposits have been completed using Laubscher’s and Mathews’ methods, which involve assessing caveability based on experience at other mining operations with similar rock quality. These methods indicate that the size (area) of a footprint required to initiate and propagate caving is between approximately 110 m and 220 m for both deposits. These dimensions are significantly smaller than the size of the deposit footprints that can potentially be mined economically by caving. This fact, together with the general large 3D shape of the deposits, suggests that both the Iron Cap and Mitchell deposits are amenable to block cave mining.
In situ stresses have been estimated at the Mitchell deposit using hydraulic fracturing tests. Based on high-induced stresses in the cave back, as predicted by numerical modelling, it is expected that stress-induced fracturing of the rock mass will contribute to caving. More sophisticated numerical analyses to confirm and quantify stress-related impacts are recommended as part of future studies.
Seabridge Gold Inc. | 16-36 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
There have been no fracture propagation assessments applicable to preconditioning designs or in situ stress interpretations developed for the Iron Cap deposit. Measurements carried out in the Mitchell deposit may not accurately reflect the fracture propagation and stress environment at Iron Cap because of the effects of surface topography. Future drilling programs should include hydraulic fracturing tests.
A significant proportion of the rock at the Mitchell deposit is predicted to have block sizes greater than 6 m3. At Iron Cap, block sizes are predicted to be 2.5 m3. Without adopting some remediation measure, such large blocks will require significant secondary blasting, and a significant adverse impact on production and damage to the drawpoints that will require ongoing rehabilitation is likely. The cost estimates for the designs presented herein have considered remediation measures to accommodate large fragmentation.
The primary measure to accommodate the large fragmentation is to precondition the rock mass. The costs and scheduling to do this have been incorporated into this study for both cave mines. However, there are a number of uncertainties associated with preconditioning due to the limited number of caving mines where it has been applied and tested. The results from those mines employing preconditioning are encouraging, and there is sufficient experience in the industry to indicate that such fragmentation concerns do not represent a fatal flaw at either mine.
The uncertainty in the effectiveness of preconditioning to enhance fragmentation was addressed via production and cost risk mitigation measures. The average draw rate per column during steady state production is approximately half of maximum (165 mm/d), meaning there are roughly two drawpoints available for production for every one required to meet production targets. In addition, a fleet of mobile rock breakers and remote blockholers are included in the designs and costs to increase the time a drawpoint is producing, by decreasing the time it is blocked with oversize.
It is very difficult to quantify the effect of attrition as the rock is brought down within the cave except that experience has indicated that in caving mines operating under similar rock conditions to those at Iron Cap and Mitchell, fragmentation of rock drawn down more than approximately 100 m is generally good. For this study, it is assumed that fragmentation of the initial 100 m of draw height is approximately equal to the estimated in situ block size and, above this, only limited secondary blasting will be required.
The expected coarse fragmentation at Mitchell and Iron Cap will result in relatively large isolated drawcone diameters of 13 m or more, for a loading width of 5 m. The present experience in other operating mines is that a 15 m by 15 m drawpoint spacing performs well under these coarse fragmentation conditions. Some caving mines operating in good quality rock have successfully expanded the layout to 17 m by 17 m or 18 m by 15 m, but it was considered prudent at this stage of study to adopt the slightly more conservative 15 m by 15 m spacing.
Seabridge Gold Inc. | 16-37 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
16.3.2 | Mitchell Underground |
The Mitchell deposit extends approximately 1,500 m east-west (along strike) and 400 m to 1,400 m north-south and is between approximately 300 m and 900 m in the vertical dimension. The deposit is massive, reasonably continuous, and, in general, geometrically suitable to mine by block caving. The potential of mining the Mitchell deposit by a combination of open pit and underground methods was investigated previously (Golder 2011, Golder 2012) and these studies concluded that it is possible to mine the upper portions of the Mitchell deposit by open pit methods and the deeper portions by block caving.
Mitchell Underground Mineral Reserves
The Mineral Resource block model used for the study contains gold, copper, silver, and molybdenum grades, as presented in Section 14.0, as well as the NSR values which are described in Section 16.2.4. The model contains Measured, Indicated, and Inferred grades, but the Inferred grades were set to zero and are not included in this PFS assessment. The Mineral Resources were constrained by the PFS pit and then evaluated using GEOVIA’s PCBC™ software, to determine the Mineral Reserves for a block cave mine. Footprints at elevations of 180 m and 235 m produced the most value. Considering the footprint elevation of 235 m from the 2012 PFS (Tetra Tech, 2012) and the similar geometries of the 2012 and 2016 footprints at this elevation, it was decided to maintain the footprint elevation at 235 m. This resulted in 454 Mt of block cave Mineral Reserves, as shown in Table 16.11.
Table 16.11 Mitchell Block Cave Mineral Reserves (Cdn$15/t NSR Shut-off)
Category |
Tonnes
(million) |
Au
(g/t) |
Cu
(%) |
Ag
(g/t) |
Mo
(ppm) |
Probable1 | 454 | 0.53 | 0.17 | 3.5 | 34 |
Notes: | 1Includes 10 Mt of mineralized dilution (the portion of Measured and Indicated material that is Cdn$0 < NSR < Cdn$16) and 59 Mt of non-mineralized dilution (material at zero NSR including the Inferred material set to zero grade). |
The Mineral Reserves contain dilution that include Mineral Resources that have grade, but are sub-economic (less than drawpoint shut-off), Inferred Mineral Resources that are set to zero grade, and non-mineralized material that is zero grade rock. Dilution estimates for the Mitchell block cave are 2% of sub-economic material (10 Mt) and 13% of zero grade dilution (59 Mt), for a total of 15% (69 Mt).
Mitchell Underground Mine Design
The underground mine design is based on modelling using GEOVIA’s PCBC™ software and Footprint Finder module. Footprint Finder modelling indicates that the optimum footprint for the Mitchell deposit is approximately 728 m wide in the north-south direction, 1,022 m wide in the east-west direction, and 860 m vertically, with the footprint elevation established at 235 m. PCBC modelling indicates that the block cave could produce 20 Mt/a (55,000 t/d), requiring the development of 120 new drawpoints per year. The final mine design includes approximately 218 km of drifts and raises, including a 25% design allowance to account for the excavation of infrastructure, such as service bays, fueling stations, wash bays, sumps, and electrical substations, and to account for overbreak.
Seabridge Gold Inc. | 16-38 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
The mine design comprises six main levels: preconditioning, undercutting, extraction, secondary breakage, haulage, and conveying (Figure 16.16). In addition, the design includes a service ramp to surface to provide access for personnel, equipment and materials, and a conveyor ramp to the MTT ore bin for excavated material to be loaded on the MTT train to the mill. The floors of the extraction drifts and drawpoints are designed to be concreted, which will increase the speed and productivity of the load-haul-dump (LHD) vehicles, as well as reduce equipment maintenance. The six levels of the mine design will be accessed through internal ramps beginning on the extraction level. These ramps will be strategically positioned to maintain access to the levels during caving and to meet ventilation requirements.
Figure 16.16 Section View of the Mitchell Block Cave Mine Design (Looking South)
Source: Golder, 2016
There are 34 extraction drifts on the extraction level, and each drift is designed with three ore passes. This will reduce the average LHD haul distance to approximately 100 m and improve productivity. The ore passes from neighbouring extraction drifts will feed a stationary rockbreaker on the secondary breaking level, which will reduce the size of the material further, and feed it to the haulage level via passes with chutes. A train on the haulage level will haul the material to centrally located gyratory crushers, where it will be crushed and conveyed to the surface.
In 2012, BGC evaluated the surface disturbance and ground deformation caused by block caving the Mitchell deposit (BGC 2012), and the analysis is still applicable to this study. It was found that the MTT and Mitchell OPC are outside the zone of disturbance resulting from caving mining.
Mitchell Underground Equipment and Major Infrastructure
The proposed mobile diesel equipment is typical of that used in underground mines and will comprise units directly related to moving ore to the crushers (7 m3 LHDs, secondary rockbreakers, and the train), development equipment (4.6 m3 LHDs and 18 m3 trucks), as well as ANFO loaders and ground support machines. In addition, service equipment is included for construction, supervision, engineering, and mine maintenance activities. At peak production, Mitchell will require a fleet of approximately 55 units of mobile underground equipment.
Seabridge Gold Inc. | 16-39 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
The mine workforce includes both staff and labour positions and the size varies according to the stage of the mine life, with a peak quantity of 379 personnel in Year 30 (in PFS years). Groundwater inflows are very small compared to surface runoff and will be readily handled by the proposed dewatering system.
The majority of the main ventilation infrastructure will be located on the extraction level. It will consist of two fresh air raises, two fresh air drifts, a fresh air ring drift, multiple internal ventilation raises, a return air drift, and two exhaust raises. An airflow of 860 m3/s is required for the Mitchell mine to achieve a production rate of 55,000 t/d, based upon the diesel equipment utilized, air velocity considerations, and an allowance of 20% per level for items such air loss around regulators, poorly installed or damaged ducting, and ventilating any inactive headings in the active mining areas. Heating the mine air in the winter months is included in the design and cost estimates. It is estimated that the Mitchell mine will require approximately 25.1 MWh of electricity at peak operation. The main contributors to this are the crushers, conveyor belts, ventilation fans, and dewatering pumps.
The mine dewatering system will require an average of 3.9 MWh, with a maximum of 29 MWh during a peak storm event, which is greater than that required to operate the entire mine under normal conditions. The strategy will be to shut down or reduce operations in the underground mine, along with other site facilities, during flooding events when the high-powered pumps are required. This will allow power to be diverted from normal operations to power the pumps.
The hydrological characterization of the site indicates that a 200-year runoff event could lead to a maximum one-day inflow of approximately 773,000 m3 of water, even with the construction of diversion ditches beyond the crest of the pit. To accommodate this inflow, the dewatering plan includes significant pumping and storage capacity underground. Two, 6.0 km long, 7.5 m x 7.5 m dewatering tunnels have been designed to convey water from the mining area to beneath the water treatment plant where eight multi-stage centrifugal pumps will lift the water and transport it to the WSD. The system is designed to handle flows at variable combined rates up to 4 m3/s.
Mitchell Underground Schedules
The mine development schedule is separated into three phases; an initial pre-production phase, which develops the primary access ramp and conveyor drifts; a second ore production phase that creates sufficient openings to start and ramp-up production from the cave; and the final phase once the mine has reached steady-state production and the development fleet is only required to create sufficient openings to maintain production. The average length of required annual development is approximately 4,000 m, with peak development occurring during the second phase, when approximately 15,000 m/a is required. The pre-production development phase for Mitchell block cave is six years.
Seabridge Gold Inc. | 16-40 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
The mine production schedule was developed using GEOVIA PCBC™ software. It is assumed that sloughing of peripheral waste rock will occur into the crater above the cave and cover the upper surface of the material being drawn down. This was modeled in PCBC by adding an infinite supply of waste material on top of the mineralized material. As material is drawn from the drawpoints, the waste will mix with mineralized material as dilution with zero grade, and the combined material will report to the drawpoint. Due to the large fragmentation that is estimated to report to the drawpoints at Mitchell, particularly during the early stages of mining, a draw rate of 200 mm/d was chosen as a maximum draw rate in the PCBC analysis. However, an average draw rate of only 108 mm/d is required to achieve production targets (the maximum draw rate modelled never exceeds 165 mm/d, so there are roughly twice as many drawpoints available as are required to meet production targets). Initially, it is assumed that a drawpoint can produce at 60 mm/d and that this will steadily increase until 50% of a column is mined. Then, the drawpoint will produce up to the set maximum of 200 mm/d. Mitchell is estimated to have a production ramp-up period of six years, steady state production at 20 Mt/a for 14 years, and then ramp-down production for another 7 years. Figure 16.17 presents the lateral development, rehabilitation, and production schedules in PFS years.
Figure 16.17 Mitchell Block Cave Mine Development and Production Schedules
Source: Golder, 2016
16.3.3 | Iron Cap Underground |
The Iron Cap deposit extends approximately 1,200 m east-west (along strike), 700 m north-south, and 800 m in the vertical direction. It is understood that the deposit remains open at depth. Open pit mining methods were used to evaluate the mining potential of this deposit as part of an update to a PFS published in 2011. Similar to Mitchell, the location, dimensions, and dip of the mineralized material at Iron Cap indicates that it is a suitable candidate for block caving.
Iron Cap Underground Reserves
The Mineral Resource block model used for the study contains gold, copper, silver, and molybdenum grades as presented in Section 14.0, as well as NSR values described in Section 16.2.4. The model contains Measured, Indicated, and Inferred grades, but the Inferred grades were set to zero and are not included in this 2016 PFS. The Mineral Resources were evaluated using GEOVIA’s PCBC™ software to determine the Mineral Reserves for a block cave mine. A footprint at an elevation of 1,035 m produced the most value and resulted in 224.6 Mt of block cave Mineral Reserves as shown in Table 16.12.
Seabridge Gold Inc. | 16-41 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Table 16.12 Iron Cap Block Cave Reserves (Cdn$16/t NSR Shut-off)
Category |
Tonnes
(million) |
Au
(g/t) |
Cu
(%) |
Ag
(g/t) |
Mo
(ppm) |
Probable1 | 224.6 | 0.49 | 0.20 | 3.6 | 13.0 |
Notes: | 1Includes 25 Mt of mineralized dilution (the portion of Measured and Indicated material that is Cdn$0 < NSR < Cdn$16) and 20.2 Mt of non-mineralized dilution (material at zero NSR including the Inferred material set to zero grade). |
The Mineral Reserves contain dilution that includes Mineral Resources that have grade but are sub-economic (less than drawpoint shut-off), Inferred Mineral Resources that are set to zero grade, and non-mineralized material that is zero grade rock. Dilution estimates for the Iron Cap block cave are 11% of sub-economic material (25 Mt) and 9% of zero grade dilution (20.2 Mt), for a total of 20% (45.2 Mt).
Iron Cap Underground Mine Design
The underground mine design is based on modelling using GEOVIA’s PCBC™ software Footprint Finder module. Footprint Finder modelling indicates that the optimum footprint for the Iron Cap deposit is at an elevation of 1,035 m and is approximately 600 m wide in the north-south direction and 400 m wide in the east-west direction. PCBC modelling indicates that the block cave could produce 15 Mt/a (average of 40,000 t/d), requiring development of 120 new drawpoints per year. The mine design requires approximately 87 km of drifts and raises, including a 25% design allowance to account for the excavation of infrastructure such as service bays, wash bays, fueling station, refuge stations, sumps and electrical substations, and to account for over break.
The Iron Cap mine design includes four main levels: preconditioning, undercutting, extraction, and conveying (Figure 16.18). The design also includes a return air drift located between the conveying and extraction levels. The floors of the extraction drifts and drawpoints are designed to be concreted, which will increase the speed and productivity of the LHD vehicles as well as reduce equipment maintenance.
Seabridge Gold Inc. | 16-42 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 16.18 Section Looking East of the Iron Cap block Cave Mine Design
Source: Golder, 2016
Personnel, material, and supplies will access the Iron Cap mine through a drift driven from the Mitchell underground access ramp. Two fresh air portals and one exhaust portal are planned on the north slope of the Mitchell valley. These tunnels may act as an emergency egress. The fresh air tunnels will connect to surface and a perimeter drift will be constructed around the mine footprint to provide fresh air to the mine workings.
Excavated material will be hauled directly from the drawpoints to one of four gyratory crushers installed on the extraction level perimeter drift. The crushed material will be transported by one of two conveyor belts, which both feed a third conveyor that will transport the production material to a surge bin located above the Iron Cap MTT train tunnel.
Iron Cap Underground Equipment and Major Infrastructure
The proposed mobile diesel equipment is typical of that used in underground mines and will comprise equipment related to moving ore to the crushers (7 m3 LHDs and secondary rock breakers), development equipment (4.6 m3 LHDs and 18 m3 trucks), as well as the ANFO loaders and ground support machines. In addition, service equipment is included for construction, supervision, engineering and mine maintenance activities. At peak operation, Iron Cap will require a fleet of approximately 51 units of mobile underground equipment.
The Iron Cap mine workforce includes both staff and labour positions and the size varies according to the stage of the mine life with a peak quantity of 350 personnel in Year 38 (KSM production years).
The required airflow for the Iron Cap mine is 548 m3/s based upon the total diesel equipment used on each mining level, including a 20% design allowance for items such air loss around regulators, poorly installed or ripped ducting, and ventilating unused headings in active sections of the mine. It is estimated that the Iron Cap mine will require 9.1 MWh of electricity at peak operation.
Seabridge Gold Inc. | 16-43 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
The hydrological characterization of the Iron Cap site indicates that a 200-year runoff event could lead to a maximum one-day inflow of approximately 292,000 m3 of water. The underground water management system at Iron Cap is currently designed to handle 4 m3/s. This caters for the estimated groundwater inflow and ice melt. The surface inflows will report to the drawpoints and will be managed in a similar manner to the groundwater inflows. To provide for drainage, the underground drifts will be graded so that water will naturally drain towards the MTT. Any flood water will be directed through the return airway drift and into the Mitchell NPWDA by a series of raises connecting the two tunnels. Pumps are not required to dewater Iron Cap.
Iron Cap Underground Mine Schedule
The mine development schedule is separated into three phases: an initial pre-production phase, which develops the primary access ramp and conveyor drifts; a second ore production phase that creates sufficient openings to start and ramp-up production from the cave; and a final phase once the mine has reached steady-state production and the development fleet is only required to create sufficient openings to maintain full production. The length of development required during the peak development period is approximately 10,000 m/a. The pre-production development period for Iron Cap is six years.
The mine production schedule was developed using GEOVIA’s PCBC™ software. It is assumed that sloughing of peripheral waste rock will occur into the crater and cover the upper surface of the material being drawn down. This was modeled in PCBC by assuming that an infinite supply of waste material is present on top of the mineralized material. As material is drawn from the drawpoints, the waste rock will mix with mineralized material as dilution with zero grade, and the combined material will report to the drawpoint.
The draw rates used in the PCBC modelling of Iron Cap are similar to those used at Mitchell, for similar reasons. During the early stages of mining, a draw rate of 200 mm/d was chosen as a maximum draw rate in the PCBC analysis. However, an average draw rate of only 110 mm/d is required to achieve production targets, so there are roughly twice as many drawpoints available as are required to meet production targets (the maximum draw rate modeled never exceeds 180 mm/d). Iron Cap is estimated to have a production ramp-up period of four years, steady state production at 15 Mt/a for 10 years, and then ramp-down production for another 9 years. Figure 16.19 presents the lateral development and production schedules in PFS years.
Seabridge Gold Inc. | 16-44 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 16.19 Iron Cap Block Cave Mine Development and Production Schedules
Source: Golder, 2016
16.4 | Mine Production Schedule |
The summarized production schedule results are shown in Table 16.13 and Figure 16.20, including both open pit and underground mining. The mine production plan starts in lower capital cost open pit areas using conventional large-scale equipment before transitioning into block cave underground bulk mining later in the mine life. Starting pits have been selected in higher grade lower strip ratio areas and cut-off grade strategy is used to enhance revenues for a minimum capital payback period. The cut-off strategy stockpiles lower grade open pit material early in the mine life. The Mitchell and Iron Cap underground block caves are brought into a development and production sequence to provide continuous mill feed during the LOM, while evening out the mine’s sustaining capital requirements. The open pit sequencing is then adjusted to augment the underground ore production to meet the full mill throughput requirements. The Mitchell underground block cave starts ore production in Year 23 and ramps up to full production by Year 29. Iron Cap block cave ore production starts in Year 32 and reaches full production by Year 36. At this point onward, all ore is supplied by the Mitchell and Iron Cap underground block caves (a total of 96,000 t/d). As the Mitchell block cave production starts to ramp down (starting in Year 46), the mill feed is further reduced to 62,000 t/d. In the final years of production (Year 49 and onwards), the underground ore is supplemented with material stockpiled from the open pits to maintain 62,000 t/d of mill feed.
Details of the production schedule can be found in the 2016 MMTS KSM PFS Engineering Report (MMTS, 2016).
Seabridge Gold Inc. | 16-45 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Table 16.13 Summarized Production Schedule – Open Pit and Underground
Note: |
1Waste mined in the production schedule in Figure
16.20 includes re-handled waste and waste mined from borrow pit sources for construction purposes.
2The mill feed specified in Table 16.13 only includes ore from the Proven and Probable open pit and underground Mineral Reserves and does not include any Inferred Mineral Resources. |
Seabridge Gold Inc. | 16-46 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 16.20 KSM Mill Feed Production Schedule
Source: MMTS, 2016
Seabridge Gold Inc. | 16-47 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
17.0 | Recovery Methods |
17.1 | Introduction |
The proposed KSM plant for the 2016 PFS will have an average process rate of 130,000 t/d. The process plant will receive ore from the Mitchell, Kerr, Sulphurets, and Iron Cap deposits. The planned mill life is approximately 53 years, excluding the production development stage and closure stage. The Mitchell deposit will be the dominant resource of mill feed for the process plant and will supply mill feed throughout the projected LOM. The ore from the Sulphurets deposit will be fed to the plant together with the ore from the Mitchell pit from Years 1 to 17, excluding Years 4, 5, 12 and 13, and with the ores from the other deposits during the last 4 years. The ore from the Kerr deposit, together with the ores from the other deposits, will be introduced to the plant during Years 24 to 34 and 53, while Iron Cap ore will be fed to the process plant from Year 32 to the end of mine life.
A combination of conventional flotation and cyanidation processes are proposed for the PFS. The processing flowsheet was developed based on the test results discussed in Section 13. In general, the mineralization from the Mitchell, Sulphurets, Iron and Kerr deposits are amenable to the combined flotation and cyanidation process. HPGR is proposed for the PFS design because of its energy efficient comminution process. The process plant will consist of three separate facilities:
● | an ore primary crushing and handling facility at the mine site |
● | an ore transportation system by trains through the MTT |
● | a main process facility in the Treaty OPC area at the Plant Site, including secondary/tertiary crushing, primary grinding, flotation, regrinding, leaching/recovery, and concentrate dewatering. |
These processes are shown in the simplified flowsheet in Figure 17.1 and are detailed in the following sections.
Seabridge Gold Inc. | 17-1 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 17.1 Simplified Process Flowsheet
Source: Tetra Tech
Seabridge Gold Inc. | 17-2 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
The ores from the Sulphurets and Kerr deposits and the upper zone of the Mitchell deposit will be extracted by open pit mining, while the ores from the Iron Cap deposit and the lower Mitchell deposit will be mined by underground block caving. The primary crushing facilities located at the Mitchell mine site will reduce the ROM particle size to approximately 80% passing 150 mm by gyratory crushers. Ores from the Sulphurets and Kerr deposits will be crushed at their respective sites, excluding the Sulphurets ore produced in Year 1, which will be hauled to and crushed at the Mitchell site. The ores from the lower Mitchell Zone and the Iron Cap deposit will be mined by block caving and be crushed in the underground mine. The crushed materials will then be transported by conveyors, or by a combination of conveyors and trains, to the MTT and loaded onto the MTT ore transport trains. The crushing circuit at the Mitchell surface site will include:
● | primary crushing by two 60 inch by 89 inch gyratory crushers |
● | crushed ore transport conveyors. |
The crushed ore will be transported by a train transport system through the MTT to the main process plant located at the Treaty OPC site, approximately 23 km northeast of the mine site. The main process plant will consist of the following process facilities:
● | secondary crushing by cone crushers in closed circuit with screens |
● | tertiary crushing by HPGR in closed circuit with screens |
● | primary grinding by ball mills |
● | copper-gold/molybdenum bulk flotation with regrinding of bulk concentrate |
● | copper-gold/molybdenum separation depending on molybdenum grade of mill feed |
● | copper-gold concentrate and molybdenum concentrate dewatering |
● | gold CIL cyanide leaching of scavenger cleaner tailing and pyrite rougher concentrate |
● | gold recovery by carbon elution and production of gold doré |
● | cyanide recovery, and then cyanide destruction of washed CIL residue prior to disposal of the residue in the lined pond within the TMF. |
The TMF, located southeast of the main process plant, is designed to store flotation tailing and CIL tailing, which will be stored in the lined tailing pond of the TMF.
The mill feed produced from the Mitchell crushing facility or from the block caving sites will be transported via the MTT train system to the coarse ore stockpile at the Treaty OPC site. The stockpile will be located at the exit portal of the MTT tunnel and will have a live capacity of 60,000 t. The coarse ore will be reclaimed and be further crushed by five cone crushers (four in operation and one on standby) and then four HPGRs in closed circuit with vibrating screens.
Seabridge Gold Inc. | 17-3 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
The screen undersized material from the HPGR circuit will be fed to four ball mills in a closed circuit with hydrocyclones. Ore solids will be reduced to a particle size of 80% passing 125 µm to 150 µm.
The products from the primary grinding circuits will be fed into copper-gold/molybdenum rougher/scavenger flotation circuits, consisting of two operation circuits in parallel. The copper rougher flotation concentrates from the flotation circuits will be reground to a particle size of 80% passing, approximately 20 µm in the tower mills.
The reground rougher concentrate will then be upgraded in a cleaner flotation circuit with three stages of copper cleaner flotation, producing a copper-gold or copper-gold/molybdenum concentrate with an average grade of 25% Cu. Depending on the molybdenum content in the copper-gold/molybdenum concentrate, the bulk concentrate may be treated by flotation to produce a molybdenum concentrate and a copper-gold concentrate. The molybdenum concentrate will be leached using the Brenda Mines procedure to reduce copper and lead contents.
The final copper concentrate(s) will be dewatered by a combination of thickening and pressure filtration to approximately 9% moisture before being transported to the Stewart port site for ship loading and delivery to copper smelters, while the molybdenum concentrate will be further dried prior to being shipped in bags to the port at Prince Rupert for delivery to molybdenum smelters.
The copper-gold/molybdenum rougher scavenger flotation tailing will be subjected to further flotation, producing a gold-bearing pyrite concentrate. The final pyrite flotation tailing will be sent to the TMF for storage. The pyrite concentrate will be reground in tower mills to a particle size of 80% passing approximately 20 µm.
The reground gold-pyrite concentrate and the first copper cleaner tailing from the copper-gold/molybdenum cleaner flotation circuit will be separately leached in a CIL cyanidation plant to recover the contained gold. The sulphide pulp will be pre-oxidized by aeration prior to cyanidation. Dissolved gold will be adsorbed onto activated carbon in the CIL circuit.
The loaded carbon from the two streams will be combined and gold will be stripped from the carbon by a conventional Zadra pressure stripping process; the gold in the pregnant solution will be recovered in the subsequent electrowinning process. The barren solution from the elution circuit will be circulated back to the leach circuit. The gold sludge produced from the electrowinning circuit will be smelted using a conventional pyrometallurgical technique to produce gold-silver doré bullion.
The residues from the leach circuit will be pumped to a conventional counter-current decantation (CCD) washing circuit. The solution from the circuit will be sent to a cyanide recovery circuit using a combination of a SART process and an AVR process. The AVR process will recover the free cyanide from the solution by acidifying and stripping the solution and then absorbing the stripped hydrogen cyanide gas by a sodium hydroxide solution to recover the cyanide for reuse.
Seabridge Gold Inc. | 17-4 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
The washed residues will be treated by an sulphur dioxide/air cyanide destruction process to destroy the residual weak acid dissociable (WAD) cyanide. The leach residues will then be further treated by carbon adsorption to remove dissolved copper. The copper will be stripped off from the activated carbon and precipitated by sodium sulphide as copper sulphide which will be blended into copper concentrates for sale.
The treated residues will then be transported by pipeline to the lined CIL pond of the TMF. The sulphide leach residues will be stored under water at all times to prevent the oxidation of sulphides.
The Treaty process plant layout and the primary grinding and flotation facilities are depicted in Figure 17.2.
17.2 | Major Process Design Criteria |
The concentrator is designed to process an average of 130,000 t/d. The major criteria used in the design are shown in Table 17.1.
Table 17.1 Major Design Criteria
Criteria | Unit | Value |
Average Daily Process Rate | t/d | 130,000 |
Operating Year | d | 365 |
Primary/Secondary Crushing | ||
Availability – Primary Crushing | % | 70 |
Availability – Secondary Crushing | % | 85 |
Primary Crushing Product Particle Size, P80 | mm | 150 |
Secondary Crushing Product Particle Size, P80 | mm | 45 |
HPGR/Grind/Flotation/Leach | ||
Availability | % | 94 |
Milling and Flotation Process Rate | t/h | 5,762 |
Mill Feed Size, P80 | mm | 2.0 |
Primary Grind Size, P80 | µm | 125-150 |
Bond Ball Mill Work Index - Design | kWh/t | 16 |
Bond Abrasion Index | g | 0.293 |
Concentrate Regrind Size, 80% Passing | ||
Cu/Au Rougher/Scavenger Concentrate | µm | 20 |
Au-Pyrite Concentrate | µm | 20 |
Gold-bearing Materials Leach Method | - | CIL |
Feed Mass to CIL Circuit | t/d | 14,600 |
Seabridge Gold Inc. | 17-5 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 17.2 Treaty Process Plant Layout
Seabridge Gold Inc. | 17-6 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
17.3 | Process Plant Description |
17.3.1 | Primary Crushing |
There will be five primary crushing sites throughout the plant operation life at the Mitchell, Kerr, and Sulphurets sites, as well as in the underground block caving mines. The proposed mill feed rates from these deposits are shown in Section 16.4.
At the Mitchell OPC site, primary crushing will mainly consist of two 60 inch by 89 inch gyratory crushers, two apron feeders, and one train load surge bin feed conveyor. The ROM material feeding to the gyratory crushers will be from the Mitchell pit and the first year Sulphurets pit, and will be approximately 80% passing 1,200 mm. The oversize materials will be fragmented by a rock breaker. The gyratory crushers will reduce the ROM material to a particle size of 80% passing 150 mm or less. The products from each gyratory crusher will be fed to one 1.83 m wide by 37 m long conveyor via one 2.13 m wide by 10 m long apron feeder. The crushed ore from the two conveyors will be fed to a 2.13 m wide by 450 m long train load surge bin feed conveyor, which will be located inside of the Mitchell surge bin feed conveyor tunnel. The surge bin is designed to have a live capacity of 30,000 t (two pockets, each 15,000 t). The ore from the Mitchell open pit will feed to the mill during Years 1 to 22, 34, 35, 48, and 49.
For the underground block cave operation, the ore from the lower Mitchell zone will be mined by block caving and crushed on site to 80% passing 150 mm or finer. The crushed ore will be conveyed to the 30,000-t surge bin where the crushed ore will be blended with the materials from the Mitchell and Sulphurets pits and then loaded from the surge bin into the train cars and transported to the end of the MTT at the Treaty site. The ore will be fed to the mill during Years 19 to 49.
The Sulphurets ore will supplement the mill feed from Years 1 to 17, excluding Years 4, 5, 12 and 13, and with the ores from the other deposits during the last four years. The ROM ore from the Sulphurets pit will be trucked to the Mitchell site and crushed at the Mitchell crushing facility in Year 1. Starting from Year 2, the ore produced will be crushed by a 60 inch by 89 inch gyratory crusher at the Sulphurets mine site. The crushed ore will be conveyed to the Mitchell site via the 3.0 km SMCT to a 10,000-t Sulphurets/Kerr coarse ore stockpile. The stockpiled ore will then be reclaimed and trucked to the Mitchell crusher dumping pockets, where the ore will pass through the crushers and be sent to the 30,000-t surge bin together with the crushed Mitchell ore.
The ore from the Kerr deposit, together with the ores from the other deposits, will be introduced to the plant during Years 24 to 34 and 53, the ROM ore and waste rock from the Kerr pit will be crushed by two 60 inch by 89 inch gyratory crushers at the Kerr mine site. The crushed ore will then be conveyed to Mitchell through a 2,480 m cross valley rope conveyor to the Sulphurets site, followed by the 3.0 km overland conveyor through the SMCT to the Sulphurets/Kerr coarse ore stockpile at the Mitchell site. The ore from the stockpile will be trucked to the Mitchell crushing facility or to the 10-Mt surge stockpile for later reclaiming and delivery to the Mitchell crushing facility. Similarly, the reclaimed ore will be trucked to the Mitchell crusher dumping pockets, where the ore will pass through the crushers and be sent to the 30,000-t surge bin together with the crushed Mitchell ore.
Seabridge Gold Inc. | 17-7 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Waste rock from the Kerr mine will be conveyed from the Kerr to the Sulphurets pit via the rope conveyor. The waste rock will then be backfilled into the mined Sulphurets pit for storage.
The Iron Cap ore will be mined by block caving and crushed on site to 80% passing 150 mm or finer. The crushed ore will be conveyed to a surge bin located at the end of the Iron Cap and MTT connection tunnel. The ore will supplement the mill feed from Year 32 to the end of mine life.
17.3.2 | Coarse Ore Transport From Mitchell Site to Treaty Site |
The crushed ore will be reclaimed by two automatic train loading systems from the two coarse ore surge bins at the Mitchell site and transported to the plant site by a train transport system through the MTT. The ore from the Iron Cap site will be loaded into the train cars at the Iron Cap underground site from the Iron Cap surge bin and transported to the Treaty site via an Iron Cap and MTT connection tunnel and then through the MTT. Loading chutes under the ore surge bins will feed ores into awaiting trains that will transport the ores to an unloading station at the Treaty end of the MTT. Because the loading and unloading systems, including surge bins are located underground, the arrangement would mitigate potential freezing issues. The train cars will dump ore into a live underground unloading bin. Two apron feeders will unload the bin onto a conveyor to transport the ore to the top of the Treaty coarse ore stockpile. Loading chutes will be controlled remotely, and unloading chutes will operate autonomously. No onboard operators will be required within the tunnels during train system operation.
Each train will consist of one, 140-t electric locomotive and sixteen 42-m3 belly dump ore cars that will have the capacity to deliver 800 t/h from Mitchell to Treaty based on 90-minute cycle times. On average, eight trains will deliver approximately 130,000 t/d of ore to meet the process plant requirements. An additional four trains will be on standby to provide for mechanical availability or to handle an increase in plant feed of up to 10,000 t/h. The transport system is detailed in Section 18.4. Dust collecting systems will be installed at the loading and unloading points to collect fugitive dust.
17.3.3 | Coarse Material Handling |
The crushed ore from the trains will be continuously and automatically unloaded from the bottom discharge ore cars into the bin underneath, with each car taking an average of nine seconds to unload. The train will be driven via traction drives across the unloading station at a maximum speed of 2.5 km/h.
At the bottom of the surge bin, the ore will be reclaimed by two apron feeders and then onto a conveyor belt that will transport the ore to the surface and feed the Treaty coarse ore stockpile with a live capacity of 60,000 t at the Treaty OPC site. Apart from the conveyor tunnel, a vertical escape tunnel that joins the unloading station and the surface will be constructed for emergency egress.
Seabridge Gold Inc. | 17-8 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
The ore will be reclaimed from the stockpile by six, 1.8 m wide by 8.5 m long apron feeders and conveyed in two lines to the secondary crushing circuit. A dust collecting system will be installed at each of the transfer points to collect fugitive dust. The reclaim tunnel will be heated to prevent potential freezing during operation in winter.
17.3.4 | Secondary Crushing |
The reclaimed coarse ore will be conveyed to the secondary crushing facility and fed to four vibrating screens. Each screen oversize will feed a secondary cone crusher. Each secondary crusher is in closed circuit with a screen. The cone crusher product will return to the screen feed conveyor. A spare cone crusher is provided in the circuit for when any of the other four cone crushers require maintenance.
Screen undersize product that is finer than 50 mm will be delivered by conveying to an enclosed surge stockpile with a 60,000 t live capacity. The circuit will consist of the following key equipment:
● | five cone crushers, each with an approximately 2.4 m diameter mantle and driven by a 750-kW motor or equivalent |
● | five 3.7 m wide by 7.3 m long double deck vibrating screens (one unit on standby). |
17.3.5 | Tertiary Crushing Material Conveyance/Storage |
The crushed ore from secondary crushing will be reclaimed from the 60,000 t stockpile by six 1.5 m by 7.6 m reclaim apron feeders and fed into two 1.37 m-wide HPGR feed conveyors. These conveyors will deliver the ore to two tertiary crusher HPGR feed surge bins, each with a live capacity of 400 t. Similarly, the stockpile reclaim tunnel will be heated to prevent potential freezing during winter operation.
17.3.6 | Tertiary Crushing |
The reclaimed ore will be further crushed by four HPGR crushers. Four belt feeders will withdraw the reclaimed ore from the two HPGR feed surge bins and feed each of the four HPGR crushers separately. Each HPGR crusher is in a closed circuit with a 4.0 m wide by 8.0 m long double deck vibrating screen. Discharge from the HPGR crushers will be wet-screened at a cut size of 6 mm. The screen oversize will return to the feed conveyor of the HPGR feed bin while the screen undersize will leave the crushing circuit and report to the ball mill grinding circuits. The four HPGR crushing lines will have a total process capacity of 5,762 t/h. The key equipment is as follows:
● | four HPGR crushers, each equipped with two 2,900 kW motors |
● | four 4.0 m wide by 8.0 m long vibrating screens |
● | four 1.5 m wide by 10.0 m long belt feeders. |
Seabridge Gold Inc. | 17-9 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
17.3.7 | Primary Grinding |
The grinding circuit will employ conventional ball mills to grind the HPGR product to a particle size of 80% passing 125 to 150 µm. All the primary grinding circuits are designed to have a nominal processing rate of 5,762 t/h.
The primary grinding circuit will include four milling circuits, which are made up of the following equipment:
● | four 7.6 m diameter by 11.9 m long (25 ft by 39 ft) ball mills, each mill driven by two 7.0 MW synchronous motors |
● | six 700 mm by 650 mm centrifugal slurry pumps (4 in operation and 2 on standby), each equipped with a 1,650 kW variable speed drive |
● | four hydrocyclone clusters, each with twelve 710 mm diameter hydrocyclones. |
Each ball mill will be in a closed circuit with a cluster of twelve 710 mm diameter hydrocyclones. The hydrocyclone underflow will gravity-flow to the ball mill feed chute, while the overflow of each hydrocyclone cluster with a solid density of 37% weight/weight (w/w) will gravity-flow to one of the four copper-gold-molybdenum rougher flotation trains.
Lime will be added to each mill as required. Flotation collectors will be added to the hydrocyclone feed sumps or to the hydrocyclone overflow collecting sumps.
17.3.8 | Copper, Gold and Molybdenum Flotation |
Copper-Gold/Molybdenum Bulk Rougher/Scavenger Flotation
There will be two copper-gold-molybdenum bulk rougher flotation circuits. The overflow from two of the four hydrocyclone clusters from the primary grinding circuits will separately feed the two flotation trains, each consisting of six 300 m3 flotation cells. The flotation reagents used will include lime, A208, 3418A, fuel oil, and MIBC. A bulk copper-gold/molybdenum rougher flotation concentrate, approximately 6% of the flotation feed by weight, will be reground. The flotation tailing will be sent to the pyrite flotation circuit.
Copper-Gold/Molybdenum Bulk Concentrate Regrinding
The copper-gold/molybdenum bulk concentrate will be reground to a particle size of 80% passing 20 µm in a regrind circuit consisting of three tower mills, each with an installed power of 2,240 kW, and a 250 mm diameter hydrocyclone cluster. The overflow of the hydrocyclones will gravity-flow to the bulk copper-gold/molybdenum cleaner circuit, while the underflow of the hydrocyclones will return to the regrinding mills by gravity flow.
Copper-Gold/Molybdenum Bulk Concentrate Cleaner Flotation
The hydrocyclone overflow will be cleaned in three stages. In the first stage of cleaner flotation, six 100 m3 tank cells will be used; for the second and third stages, three 50 m3 tank cells and two 50 m3 tanks will be used separately. First cleaner flotation tailing will be further floated in two cleaner scavenger flotation cells, each with 100 m3 capacity. The concentrate product from the cleaner scavenger flotation will be sent to the first cleaner cells and the tailing will report to the gold leaching circuit. The tailing from the second and third cleaner flotation stages will be returned to the head of the preceding cleaner flotation circuit. Final copper-gold/molybdenum bulk concentrate will be sent to copper-gold/molybdenum bulk concentrate thickener.
The same reagents used in the rougher flotation circuit will be employed in the cleaner flotation circuits.
Seabridge Gold Inc. | 17-10 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Copper-Gold and Molybdenum Separation
Depending on molybdenum content, the final copper-gold/molybdenum concentrate may be further processed to produce a copper-gold concentrate and a molybdenum concentrate. The separation will employ a conventional process, which will include copper suppression by sodium sulphide and four stages of molybdenum cleaner flotation and regrinding. The circuit will include the following key equipment:
● | one 15 m diameter high rate thickener |
● | six 30 m3 conventional mechanical flotation cells |
● | one 1.5 m diameter by 4.5 m high column cell |
● | one 1.1 m diameter by 4 m high column cell |
● | two 1.0 m diameter by 4 m high column cells |
● | one nitrogen gas generator |
● | one regrinding stirred mill. |
The copper-gold/molybdenum bulk concentrate will be thickened prior to the copper-gold/molybdenum separation. The thickener underflow will be diluted and conditioned with sodium sulphide and gravity flow into the molybdenum rougher flotation cells. The rougher flotation tailing will be scavenged by flotation and the scavenger concentrate will return to the rougher flotation head while the tailing will be the final copper-gold concentrate reporting to the copper-gold concentrate dewatering circuit.
The resulting rougher molybdenum concentrate will be classified by a hydrocyclone. The hydrocyclone underflow will be reground by a stirred mill and joined with the hydrocyclone overflow reporting to the molybdenum cleaner flotation circuit. Four stages of cleaner flotation were designed to upgrade the molybdenum rougher flotation concentrate to marketable grade. The tailing of each cleaner flotation will be returned to the head of the preceding molybdenum cleaner flotation circuit while the first cleaner tailing will be sent to the molybdenum rougher flotation conditioning tank. To reduce sodium hydrosulphide consumption, the molybdenum flotation cells will be aerated by nitrogen gas, which will be generated on site by a nitrogen generator.
The final cleaner flotation concentrate will be leached to reduce the copper content, if it is higher than 0.2%. The leached product will be dewatered in a molybdenum concentrate dewatering facility.
Seabridge Gold Inc. | 17-11 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
17.3.9 | Concentrate Dewatering |
The upgraded copper-gold concentrate will be thickened in a 15 m diameter high rate thickener. The thickener underflow will be directed to the copper-gold concentrate pressure filter to further reduce the water content to 9% moisture. The copper-gold concentrate will be stockpiled on site and then transported by trucks to a port facilities at Stewart, where the concentrate will be stored and loaded into ships for ocean transport to overseas smelters.
The average copper concentrate produced is estimated to be approximately 940 t/d or 344,000 t/a.
The molybdenum concentrate will be dewatered using a similar process to the copper-gold concentrate. The filtered concentrate will be further dewatered by a dryer to 5% moisture content, before being bagged and transported to the processors. The key equipment used in the dewatering processes will include:
● | copper-gold concentrate dewatering: |
- | one 15 m diameter high rate thickener |
- | one 8 m diameter by 7 m high concentrate stock tank |
- | two 160 m2 pressure filters. |
● | molybdenum concentrate dewatering: |
- | one 2 m diameter high rate thickener |
- | one molybdenum concentrate leaching system |
- | one 4 m2 pressure filter |
- | one 2.5 t/h dryer. |
17.3.10 | Gold Recovery From Gold-bearing Pyrite Products |
Gold-bearing Pyrite Flotation
The tailing of the copper-gold/molybdenum rougher flotation circuits will be further floated in a pyrite flotation circuit. The pyrite rougher flotation will consist of two parallel lines, each line with six 300 m3 pyrite rougher flotation cells.
Tailing from the pyrite rougher flotation will gravity-flow, or be pumped to the TMF located southeast of the main process plant.
Gold-bearing Pyrite Concentrate Regrinding
The pyrite concentrate will be reground to a particle size of 80% passing approximately 20 µm in three 2,240 kW tower mills. A hydrocyclone cluster consisting of twenty-six 250 mm diameter hydrocyclones will be incorporated with the mills in a closed circuit. The hydrocyclone overflow will report to the gold leach circuit or the copper-pyrite separation circuit.
Depending on copper content, the reground materials may be subjected to a flotation process to separate copper minerals from the other minerals. The copper concentrate will be sent to the copper-gold/molybdenum cleaner flotation circuit, while the flotation tailing will report to the gold leach circuit.
Seabridge Gold Inc. | 17-12 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Gold Leach
The reground gold-bearing pyrite product and the first cleaner scavenger tailing from the copper-gold/molybdenum bulk flotation circuit will be separately thickened to a solids density of 65% in two 35 m diameter high rate thickeners.
The underflow of each thickener will be pumped to two separate cyanide leaching lines. Each line will consist of two pre-treatment tanks and five cyanide leaching tanks. In the pre-treatment tanks, the thickener underflow will be diluted with barren solution to approximately 45% w/w and aerated. Lime will be added to increase the slurry pH to approximately 11.
The pre-treated slurry will be leached by sodium cyanide to recover gold in a conventional CIL circuit. The leach circuit will consist of five agitated tanks, which are 15 m diameter by 15 m high. The tanks will be equipped with in-tank carbon transferring pumps and screens to advance the loaded carbon to the preceding leach tank.
The loaded carbon leaving the first CIL tanks of the two leaching lines will be transferred to the carbon stripping circuit, while the leach residue will be blended and sent to subsequent processes including residue washing, cyanide recovery, and cyanide destruction circuits.
The key equipment in the leach circuit will include:
● | two 35 m high rate thickeners |
● | four 9 m diameter by 10 m high aeration tanks |
● | ten 15 m diameter by 15 m high CIL leach tanks equipped with in-tank carbon transferring pumps and screens |
● | one 3 m wide by 4 m long carbon safety screen. |
Compressed air will be provided for the leaching process from four dedicated oil-free air compressors.
Carbon Stripping and Reactivation
The loaded carbon will be treated by acid washing and the Zadra pressure stripping process for gold desorption.
The loaded carbon will be acid washed prior to being transferred to two elution vessels. The stripping process will include the circulation of the barren solution through a heat recovery heat exchanger and a solution heater. The heated solution will then flow up through the bed of the loaded carbon and overflow near the top of the stripping vessels. The pregnant solution will flow through a back pressure control valve and then be cooled by exchanging heat with the barren solution prior to reporting to the pregnant solution holding tank for subsequent gold recovery by electrowinning. The barren solution from the electrowinning circuit will then return to the barren solution tank for recycling.
Seabridge Gold Inc. | 17-13 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
The stripping process will include barren and pregnant solution tanks, two 3 t acid wash vessels, two 3 t stripping vessels, four heat exchangers, and two solution heaters and associated pumps.
Prior to reactivation, the stripped carbon will be screened and dewatered. The reactivation will be carried out in an electrically heated rotary kiln at a temperature of 700°C. The activated carbon will be circulated back to the CIL circuit after abrasion treatment and screen washing.
The carbon reactivation process will include a reactivation kiln, a carbon quench tank, and a carbon abrasion tank equipped with an attrition agitator, a reactivated carbon sizing screen, a carbon storage bin, and fine carbon handling associated equipment.
Gold Electrowinning and Refining
The pregnant solution from the elution system will be pumped from the pregnant solution stock tank through electrowinning cells where the gold and silver will be deposited on stainless steel cathodes. The depleted solution will be subsequently reheated and returned to the stripping vessel. The electrowinning circuit will have a capacity to process 80 kg/d of gold-silver doré bullion and will include two 3.5 m3 electrowinning cells, direct current rectifiers, cathodes, anodes, and a pressure filter.
Periodically, the stainless steel cathodes will need to be cleaned to remove precious metal residues by pressure washing. The cell mud will fall into the bottom of the electrowinning cells and pumped through a pressure filter for dewatering on a batch basis. The filter cake will be transferred to the gold room for drying and smelting after it is mixed with melting flux. A 125 kW induction furnace will be used for gold-silver refining. The area will be monitored by a security surveillance system.
17.3.11 | Treatment of Leach Residues |
Leach Residue Washing
The residues from the CIL circuit will be pumped to a two stage conventional CCD washing circuit. The CCD circuit will consist of two 40 m diameter high rate thickeners. The thickener overflow from the first stage washing will be pumped to the cyanide recovery system. The underflow (washed residues) of the second thickener will be sent to the cyanide destruction circuit prior to being pumped to the TMF.
Cyanide Recovery
The overflow of the first leach residues washing thickener will be sent to a cyanide recovery circuit where the copper will be removed and the cyanide will be recovered from the solution by a SART/AVR process.
The SART/AVR cyanide recovery process will be carried out in a negative pressure system generated by a vacuum system.
Seabridge Gold Inc. | 17-14 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
The CCD overflow will be acidified by sulphuric acid. Sodium hydrosulphide will be added to precipitate the heavy metals in the solution, especially the copper. The precipitates will be blended with the copper-gold concentrate for sale. The solution will then be pumped to two volatilization towers in series. The solution together with pressurized air will be sprayed in the towers to provide a high liquid surface area to promote volatilization.
The gas phase will be directed through an absorption tank, in which a caustic solution is circulated counter-current to the gas to absorb hydrogen cyanide. The regenerated cyanide solution will be returned to the leach circuit.
The cyanide-depleted solution from the volatilization tower will be settled in a 10 m diameter clarifier. The metal species will precipitate in the clarifier, while the clarified solution will be circulated to the leach residues washing circuit and the leach circuit after the solution is treated with lime to a pH above 9.5. The precipitates will be blended with the copper-gold concentrate for sale.
Cyanide Destruction
The remaining cyanide in the washed leach residues from the second washing thickener will be decomposed by a sulphur dioxide (SO2)/air oxidation cyanide destruction process. Sodium metabisulphite will be used as the sulphur dioxide source. The equipment will include a 6 m diameter by 6 m high pre-aeration agitation tank, three 11 m diameter by 12 m high sulphur dioxide oxidation tanks, and a wet alkaline scrubbing system. Compressed air will be provided for the oxidation process. The treated residues will be sent to the copper removal treatment circuit.
Copper Removal
A copper removal circuit is proposed to remove the dissolved copper from the treated residue slurry if the copper level in the slurry from the sulphur dioxide/air cyanide destruction circuit is higher than the requirement. Activated carbon will be added to the residue slurry after the slurry is treated by cyanide destruction. The copper removal treatment will be carried in two stages in two reactors. The loaded carbon will be removed from the first stage of the copper removal reactor, while the fresh carbon will be added into the section stage of the copper removal reactor. The copper loaded carbon will be stripped by acid washing and the copper in the washing solution will be precipitated by sodium sulphide. The precipitate produced will be blended with the copper-gold concentrate for sale. The treated residues will be sent to the lined CIL residue storage pond in the TMF.
17.3.12 | Tailing Management |
The flotation tailing and the treated CIL residues will separately gravity-flow or be pumped to the TMF located southeast of the main process plant. The flotation tailing and CIL residue will be stored in separate areas within the TMF.
Seabridge Gold Inc. | 17-15 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
The CIL residue will be deposited in a lined CIL residue storage pond. The residue will be covered with the supernatant to prevent oxidation of the sulphide minerals. The residue will be eventually covered by the flotation tailing. The supernatant from the CIL residue pond will be reclaimed by pumping to the CIL circuit for reuse. The excess water will be sent to a hydrogen peroxide (H2O2) water treatment plant to further remove impurities before it is sent to the north or south tailing ponds.
There will be two flotation tailing pipelines directing the flotation tailing to the TMF. The flotation tailing from one of the tailing pipelines will be classified to produce coarse tailing sands by two stages of hydrocyclone classification. The coarse fraction will be used to construct the tailing dam and the fines will directly report to the TMF together with the tailing from the other line. The supernatant from the tailing impoundment area will be reclaimed by a reclaim water barge and sent to the process water tank by two stages of pumping. The reclaimed water will be used as process water for flotation circuits.
One energy recovery system will be installed on one of the rougher flotation tailing lines, which will deliver the tailing to the north dam, to generate electricity.
A separate barge equipped with reclaim water pumps will be installed in the flotation tailing storage pond to reclaim water from the TMF supernatant for the tailing classification operations (to provide dilution water for hydrocycloning) and for the excess water discharge via the Treaty Creek diffuser. Discharge will occur during a five month window, beginning during spring runoff when the creek flows are highest. A floating skimmer will be installed. If required, flocculant will be added from the floating skimmer to improve the settlement of any suspended solids before the excess water is discharged.
17.3.13 | Reagents Handling |
The reagents used in the process will include:
● | Flotation: PAX, 3418A, A208, fuel oil, MIBC, lime (CaO), NaHS, and sodium silicate (Na2SiO3) |
● | CIL and Gold Recovery: lime, sodium cyanide (NaCN), activated carbon, sodium hydroxide (NaOH), hydrochloric acid (HCl) and flux |
● | Cyanide Recovery and Destruction Reagents: metabisulphite (MBS), copper sulphate (CuSO4), sulphuric acid (H2SO4), lime, NaOH, activated carbon, sodium hydrosulphide (NaHS) |
● | Others: flocculant, antiscalant, H2O2. |
All the reagents will be prepared in a separate reagent preparation and storage facility in a containment area. The reagent storage tanks will be equipped with level indicators and instrumentation to ensure that spills do not occur during operation. Appropriate ventilation and fire and safety protection will be provided at the facility.
The liquid reagents (including fuel oil, A208, 3418A, MIBC, HCl, H2SO4, H2O2 and antiscalant) will be added in the undiluted form to various process circuits via individual metering pumps.
Seabridge Gold Inc. | 17-16 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
All the solid type reagents (including PAX, NaHS, Na2SiO3 if required, NaOH, NaCN, CuSO4, and MBS) will be mixed with fresh water to 10% to 25% solution strength in the respective mixing tank, and stored in separate holding tanks before being added to various addition points by metering pumps.
Lime will be slaked, diluted into 15% solid milk of lime, and then distributed to various addition points through a closed and pressurized loop.
Flocculant will be dissolved, diluted to less than 0.5% strength, and then added to various thickener feed wells by metering pumps.
Flux will be added directly in solid form.
17.3.14 | Water Supply |
Three separate water supply systems will be provided to support the operation; a fresh water system, a process water system for grinding/flotation circuits and a process water system for CIL/gold recovery circuits.
On average, based on the preliminary water requirement and water balance estimates, approximately 39,400 m3/day of process make-up water and 1,300 m3/day of fresh water will be required for the processing plant.
Fresh Water Supply System
Fresh and potable water will be supplied to two 12 m diameter by 9 m high storage tanks from nearby wells and local drainage runoff areas. One tank will be located at the Plant Site and the other at mine site. Fresh water will be used primarily for the following:
● | fire water for emergency use |
● | cooling water for mill motors and mill lubrication systems |
● | potable water supply |
● | reagent preparation. |
By design, the fresh water tanks will be full at all times and will provide at least 2 h of firewater in an emergency. The minimum fresh water requirement for process mill cooling and reagent preparation is, on average, estimated to be approximately 250 m3/h.
The potable water from the fresh water source will be treated (by chlorination and filtration) and stored in a covered tank prior to delivery to various service points.
Process Water Supply System
Two process water systems will supply the process water for the process plant. The water for each circuit will be from different sources, as follows:
● | water for Grinding/Flotation Circuits: reclaimed water from the flotation tailing pond, copper-gold/molybdenum concentrate thickener overflow and the CIL feed thickener overflow, as well as fresh water. The dominant process water will be the supernatant fluid from the flotation tailing impoundment area |
Seabridge Gold Inc. | 17-17 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
● | water for CIL Leaching/Gold Recovery Circuits: reclaimed water from the CIL storage pond, barren solution and fresh water. As required, the water reclaimed from the flotation tailing pond may also be used in these circuits. |
The water reclaimed from the flotation tailing impoundment area will be sent to a 25 m diameter by 15 m high process water surge tank by two stages of pumping systems, while the bulk concentrate thickener overflow will be directed to the primary grinding circuits. The process water tank will be located approximately 25 m higher than the process plant base elevation. The water will flow to the various service points by gravity. A booster pump station is provided at the Plant Site to pump water to the various distribution points where high pressure water is required.
The water from the CIL residue storage pond will be pumped to an 8 m diameter by 8 m high process water surge tank located at the Plant Site. The water will service the CIL leach/gold recovery circuits. Any excess water from the CIL residue storage pond will be treated at the H2O2 WTP located at the Plant Site. The treated water will be sent to the north or south tailing ponds.
The overall site water management is detailed in Section 18.2.
17.3.15 | Air Supply |
Plant air service systems will supply air to the following areas:
● | flotation circuits – low pressure air for flotation cells by air blowers |
● | leach circuits – high pressure air by dedicated air compressors |
● | cyanide recovery and destruction circuits – high pressure air by dedicated air compressors |
● | filtration circuit – high pressure air for filter pressing and drying of concentrate by dedicated air compressors |
● | crushing circuit – high pressure air for the dust suppression (fogging) system and other services by an air compressor |
● | plant service air – high pressure air for various services by two dedicated air compressors |
● | instrumentation – instrument air at mine site and Plant Site will come from the local air compressors and will be dried and stored in dedicated air receivers. |
17.3.16 | Assay and Metallurgical Laboratory |
The assay laboratory will be equipped with necessary analytical instruments to provide routine assays for the mine, process, and environmental departments.
The metallurgical laboratory, with laboratory equipment and instruments, will undertake all necessary test work to monitor metallurgical performance and to improve the plant production and metallurgical results.
Seabridge Gold Inc. | 17-18 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
17.3.17 | Process Control and Instrumentation |
The plant control system will consist of a Distributed Control System (DCS) with PC-based Operator Interface Stations (OIS) located in the following three control rooms:
● | Mitchell site primary crusher control room |
● | MTT train transport control room |
● | Treaty plant site control room. |
The plant control rooms will be staffed by trained personnel 24 h/d.
A crushing control room at the Sulphurets pit will be added in Year 2. The Sulphurets pit crushing control room will be relocated to the Kerr pit crushing plant in Year 20.
In addition to the plant control system, a closed-circuit television (CCTV) system will be installed at various locations throughout the plant including the crushing facility, the stockpile conveyor discharge point, the slurry pumping tunnel, the tailing facility, the concentrate handling building, and the gold recovery facilities. CCTVs in these areas will be monitored from the local control room and the central control room.
An automated train dispatching system will be utilized to achieve a safe and efficient flow of trains through the system, with no on-board operators. The system employing full radio-based train spacing and speed supervision on the whole railway system will be supervised from a control room located in the train maintenance shop. The train control system will operate using a wireless communications system (Wi-Fi) that must be in place for the entire track. While wireless communications are the current state of the art technology for train control communications, it is recognized that more efficient and reliable communications may be developed in the future.
Process control will be enhanced with the installation of an automatic sampling system. The system will collect samples from various streams for on-line analysis and the daily metallurgical balance.
To protect operating staff, cyanide monitoring/alarm systems will be installed in the cyanide leaching area as well as at the cyanide recovery area and destruction area. A sulphur dioxide monitor/alarm system will monitor the cyanide destruction area as well.
Seabridge Gold Inc. | 17-19 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
17.4 | Yearly Production Projection |
In general, the mineral processing is designed to use conventional flowsheet and mature technologies for the process plant. The flowsheet proposed is relatively simple and mining will start with conventional open pit operation with an exposed ore body on the surface. HPGRs will be used for comminution circuit, which is expected to have fewer potential rock hardness issues. Cerro Verde mine used a similar comminution and flotation plant initially for its approximately 120,000 t/d plant, which has since been successfully expanded to 360,000 t/d. They leveraged experience from the existing operation and ramped up to approximately 95% of the name plate rate in approximately 6 months. Also notable is that larger cone crushers and HPGRs greater than those which KSM will employ have been in operation.
It is estimated that the plant may take approximately twelve months to reach design capacity after the plant is wet commissioned.
According to the metallurgical projections described in Section 13.7 and the current mine schedule, metal recovery and concentrate grades for the plant operation life are projected on a yearly basis, as indicated in Table 17.2.
As shown by the test results, it is anticipated that on average the impurity contents in the copper concentrates would be below the penalty limits as outlined for most of the smelters, although in short periods the impurity content may slightly exceed the penalty limits as outlined for some of the smelters. The projected copper concentrate quality is shown in Table 17.3.
In general, the molybdenum concentrate separated from copper and molybdenum bulk concentrate will be leached on site to remove copper, lead and other impurities. The anticipated molybdenum content is approximately 50%. The main impurities such as copper and lead are estimated to be lower than 0.2% and 0.3%, respectively.
Seabridge Gold Inc. | 17-20 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Table 17.2 Projected Metallurgical Performance
Seabridge Gold Inc. | 17-21 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Table 17.3 Projected Copper Concentrate Quality
Element | Unit | Content | ||
Range |
Years
1 to 10
Average |
LOM
Average |
||
Cu | % | 23 – 28 | 25 | 25 |
Au | g/t | 28 – 109 | 61 | 43 |
Ag | g/t | 123 – 505 | 174 | 190 |
Mo | % | 0.03 – 0.21 | 0.15 | 0.10 |
ST | % | 28 – 41 | 34 | 34 |
S-2 | % | 26 - 36 | 32 | 32 |
Fe | % | 24 – 35 | 29 | 29 |
Sb | ppm | 199 – 1,966 | 993 | 1,008 |
As | ppm | 460 – 2,760 | 1,769 | 1,403 |
Co | ppm | 42 – 97 | 47 | 61 |
Cd | ppm | 33 - 172 | 88 | 92 |
Bi | ppm | 15 – 156 | 27 | 48 |
Hg | ppm | 1.2 – 10 | 2.8 | 3.6 |
Ni | ppm | 49 – 233 | 76 | 91 |
F | ppm | 75 - 399 | 241 | 193 |
Cl | % | 0.01 – 0.02 | 0.01 | 0.01 |
Se | ppm | 62 – 148 | 74 | 95 |
P | ppm | 67 – 536 | 156 | 194 |
Pb | % | 0.1 – 1.0 | 0.5 | 0.4 |
Zn | % | 0.2 – 0.9 | 0.4 | 0.5 |
SiO2 | % | 2.3 – 11 | 6.4 | 5.7 |
CaO | % | 0.2 – 0.8 | 0.5 | 0.5 |
Al2O3 | % | 0.5 – 3.9 | 2.1 | 1.7 |
MgO | % | 0.1 – 0.5 | 0.3 | 0.3 |
MnO | % | 0.01 – 0.04 | 0.01 | 0.02 |
InSol | % | 3.1 – 12 | - | - |
Seabridge Gold Inc. | 17-22 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
18.0 | Project Infrastructure |
18.1 | Site Layout |
There will be two separate areas of infrastructure associated with the 2016 PFS: the Mine Site and the PTMA. The Mine Site is the centre of mining activity and includes the primary crushing facilities (Mitchell OPC). Process facilities will be located at the Treaty OPC in the PTMA, approximately 23 km northeast of the Mine Site. Twinned tunnels (the MTT) will be constructed from the north side of the Mine Site into the upper reaches of the Treaty OPC. Along the MTT route, a topographical low (valley) is designated as the Saddle Area, approximately 17 km from the Mitchell portal, where the MTT will be accessed via a construction adit. The TMF is located in a valley comprising the upper catchments of North Treaty and South Teigen creeks, southeast of, and adjacent to the Treaty OPC.
The Mine Site layout at the end of construction is shown in Figure 18.1.
The Treaty OPC area is shown in Figure 17.2 and the TMF area is shown in Figure 18.2.
Seabridge Gold Inc. | 18-1 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 18.1 Mine Site Layout after Initial Construction
Seabridge Gold Inc. | 18-2 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 18.2 Ultimate TMF Layout
Seabridge Gold Inc. | 18-3 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
18.2 | Tailings, Mine Rock, and Water Management |
18.2.1 | Introduction |
This section addresses the geotechnical designs for tailings and mine rock management, as well as for site-wide water management. Designs were updated in 2016 to incorporate incremental improvements and changes to water management structures in the Mine Site and TMF areas, in response to commitments made during the EA process review.
The 2016 PFS design updates in the TMF area included:
● | addition of a discharge pipeline system and a diffuser located in Treaty Creek to route operational-period discharges to Treaty Creek |
● | addition of the North Cell Closure Spillway |
● | addition of three energy dissipation dams to facilitate road crossings and to contain potential debris flows at significant stream crossings along the South Diversion Channel (this channel follows the TCAR to the Treaty OPC) |
● | relocation of the TMF seepage collection dams downstream to more effectively intercept seepage. |
The 2016 PFS design updates at the Mine Site included:
● | relocation of MDT Inlets upstream to improve diverted water quality, and improved inlet design |
● | a shift of the WSF CDT outlet 200 m upstream to avoid an avalanche area, and design of a closure gate and permanent tunnel plug for the WSF CDT |
● | modification of discharge from the WSF to use pumped discharge in lieu of discharge pipes passing under the WSD |
● | expansion of the water treatment plant to a maximum capacity of 7.5 m3/s treatment capacity once the HDS WTP is fully built |
● | improved water treatment discharge strategy designed to mimic natural flows within the Sulphurets drainage basin |
● | addition of a Selenium WTP |
● | placement of the Kerr waste rock in the Sulphurets Pit |
● | expanding the contact water management systems to handle a 200-year flood |
● | the inclusion of the MVDT |
● | design updates for the Sludge Storage Facility and Water Treatment Sludge Storage Building. |
Seabridge Gold Inc. | 18-4 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
KCB re-assessed additional site climate and hydrology data recorded through 2015. These analyses determined similar values to those adopted for the 2012 PFS (KCB, 2012; KCB, 2013a; Tetra Tech, 2012) for an average year. As a result, the water management design basis remained unchanged from 2012.
Details of TMF, RSF, and SWM prefeasibility design for the 2016 PFS are provided in the following 2016 KCB reports:
● | Mine Area Water Management Addendum Report |
● | Tailings Management Facility Design Addendum Report |
● | Rock Storage Facility Addendum Report |
● | Tunnels and Temporary Water Treatment Addendum Report. |
18.2.2 | Mine Site Characterization |
No additional geotechnical site investigations have been completed for the WSD or RSF areas since the 2012 PFS (Tetra Tech, 2012). The 2012 PFS provides a results summary of KCB Mine Site geotechnical site investigations completed up to 2012 (KCB, 2009; 2010; 2011; and 2012).
Seabridge has completed regional geological mapping that resulted in a Mine Site geology map, presented in Figure 18.3.
Seabridge Gold Inc. | 18-5 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 18.3 Mine Site Mapped Geology
Mine Site Climate
Much of the annual precipitation in Mine Site and PTMA occurs as snowfall between October and May, while peak rainfall is associated with storms coming in from the Pacific between August and October. Major elevation variations and numerous glaciers help create diverse climatic conditions across the site.
Two climatic regions are present within the site development areas: the western region in the Sulphurets watershed (Mine Site) and the eastern region in the Treaty-Teigen watersheds (PTMA). The two regions are 23 km apart and have differing climates. The two areas are separated by the Johnstone Icefield (ranging from 1,800 m to 2,200 m in elevation).
Significant orographic and rain shadow effects were recorded in the KSM area as part of the 2012 baseline study. In 2012, KCB and ERM performed extensive analysis of climate variations in Mine Site and PTMA for engineering design and EA purposes (Rescan, 2013). Algorithms were developed based on the UBC watershed model to estimate effects of variation in precipitation with altitude, and to adjust glacier and snow melt rates in response to climatic variations.
Seabridge Gold Inc. | 18-6 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
In 2016, metrological and hydrological data collected since 2012 was reviewed by KCB (KCB, 2016a; KCB, 2016b). The result is that no significant trends have been observed in the additional data for average site parameters, as compared to the data prior to 2012.
Mine Site Temperature
Weather data recorded at the Sulphurets weather station between 2007 and 2015 indicate the following:
● | mean annual temperature is approximately 0°C |
● | mean monthly temperatures range from -13°C in December to 14°C in July |
● | temperature extremes range from -31°C to 30°C |
● | mean daily temperatures are above freezing from May to October and below freezing from October to May. |
Mine Site Precipitation and Hydrology
The estimated mean annual precipitation is 1,652 mm at Sulphurets weather station (elevation of 880 masl). Annual lake evaporation is estimated at 400 mm. Runoff at the Mine Site is influenced by the effects of both seasonal snowmelt and glacial melt. Mitchell and McTagg glaciers are losing significant ice mass on an annual basis. Runoff from glacier-influenced catchments is therefore larger than the annual precipitation over these catchments. Effects of glacial meltwaters are included in the analysis of flows and extreme events. Monthly precipitation, evaporation, and runoff distribution for the Mine Site, as well as the runoff distributions for the glacier catchments, is provided in Table 18.1.
Precipitation listed in Table 18.1 is representative of the Sulphurets weather station at 880 masl and is derived from site data between 2008 and 2011. Additional site data recorded since 2012 has not changed the values adopted for design. Assessment of tipping bucket rain gauge data indicates that precipitation increases at higher elevations within the Mine Site at a nominal rate of +5% per 100 m.
The 2012 and 2016 KCB design reports present detailed analyses of climate and hydrology data for the Mine Site (KCB, 2012a; KCB, 2016b) and PTMA (KCB, 2012; KCB 2016a).
Seabridge Gold Inc. | 18-7 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Table 18.1 Climate Data for the Mine Site (Sulphurets Creek Climate Station)
Data Area | Jan | Feb | Mar | Apr | May | Jun | Jul | Aug | Sep | Oct | Nov | Dec | Total |
Precipitation (mm) 1 | 215 | 50 | 50 | 66 | 99 | 83 | 115 | 149 | 264 | 297 | 132 | 132 | 1,652 |
Pond Evaporation (mm)2 | 0 | 0 | 0 | 0 | 86 | 93 | 99 | 80 | 43 | 0 | 0 | 0 | 400 |
Site Runoff Distribution (%) | 0 | 0 | 1 | 1 | 4 | 14 | 35 | 17 | 17 | 7 | 3 | 1 | 100 |
Mitchell Glacier Runoff (mm) | 37 | 37 | 73 | 73 | 110 | 404 | 1,248 | 917 | 514 | 183 | 37 | 37 | 3,670 |
McTagg Glacier Runoff (mm) | 66 | 33 | 33 | 33 | 197 | 625 | 954 | 526 | 461 | 197 | 99 | 66 | 3,290 |
Notes: |
1Weather
station at 880 masl elevation.
2Estimated pond evaporation based on pan evaporation data. |
Source: KCB
Seabridge Gold Inc. | 18-8 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Mitchell Glacier Recession
Seabridge has been monitoring the recession of site glaciers by analyzing historical air photos, Light Detection and Ranging (LIDAR) data, ongoing global positioning system (GPS) and remote sensing measurements of the glacier extents. Glaciers in the Mine Site area continue to recede; recession rates for the Mitchell Glacier toe area recession since 2008 have reached as much as 65 m/a and total recession has exceeded 2012 estimates. As a result, the Mitchell pit area is now ice free. The locations of the initial stage proposed surface contact water inlets in the toe area of Mitchell Glacier are now also free of ice.
18.2.3 | TMF Site Characterization |
TMF Site Investigations
No additional site investigations have been conducted at the TMF since the effective date of the 2016 PFS, with the exception of mapping and sampling for till borrow material (KCB, 2019a).
Tailings Characterization and Laboratory Testing
No additional tailings testing has been conducted for TMF design purposes since 2012. The Treaty process plant will produce two tailings streams: the bulk rougher flotation tailings1 representing about 90% of the ore (by dry weight) and a fine, sulphide-rich cleaner tailings comprising 10% of the ore. The sulphide stream will be cyanide leached using the CIL method and then processed for gold recovery. A two-stage cyanide destruction circuit is proposed, using the Inco sulphur dioxide process, followed by hydrogen peroxide treatment2.
The flotation tailings is classified as NPAG and will be cycloned to produce sand fill for construction of the tailings dams during the summer months. The fine cyclone overflow tailings will be discharged along the upstream crest of the tailings dams. The entire flotation tailings stream will be discharged along the dam crests during the winter months.
The CIL residue tailings is a high-sulphide concentration material and is classified as PAG. This material will be deposited under water in the CIL Residue Storage Cell in the centre of the TMF and kept saturated to mitigate the onset of acid generation.
TMF Area Climate
Additional climate and hydrological data collected since 2012 was reviewed (KCB, 2016a) and the conclusion is that no significant trends in average parameters are apparent. As a result, the climate and hydrology parameters used for design of the TMF in 2012 have been retained.
1 Referred to as “Flotation Tailings” in this report.
2This stream is referred to as “CIL Tailings” in this report.
Seabridge Gold Inc. | 18-9 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
TMF Area Temperature
Weather data recorded at the TMF area from the Teigen Creek weather station between 2009 and 2011, with additional data now available through 2015, shows the following:
● | mean annual temperature is approximately 0°C |
● | mean monthly temperatures range from -8°C from December to February, to 11°C in July |
● | temperature extremes range from -27°C to 29°C |
● | mean daily temperatures are above freezing from May to October and below freezing from October to May. |
The monthly precipitation and runoff distribution are provided in Table 18.2.
Seabridge Gold Inc. | 18-10 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Table 18.2 Climate Data for the TMF (Teigen Creek Climate Station)1
Data Area | Jan | Feb | Mar | Apr | May | Jun | Jul | Aug | Sep | Oct | Nov | Dec | Total |
Precipitation (mm) | 151 | 110 | 123 | 82 | 55 | 69 | 82 | 82 | 165 | 206 | 164 | 82 | 1,371 |
Pond Evaporation (mm)2 | 0 | 0 | 0 | 0 | 75 | 81 | 86 | 70 | 38 | 0 | 0 | 0 | 350 |
Site Runoff Distribution (%) | 1 | 1 | 1 | 3 | 16 | 32 | 19 | 8 | 9 | 7 | 2 | 1 | 100 |
Note: |
1Weather
station at elevation 1,085 masl.
2Estimated pond evaporation based on pan evaporation data. |
Source: KCB
Seabridge Gold Inc. | 18-11 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
18.2.4 | Rock Storage Facilities |
A rendering of the ultimate mine site layout, including the McTagg and Mitchell RSFs is provided in Figure 16.13. Design of the RSFs has not changed since the 2016 PFS.
At the PFS level, there are three primary RSF design considerations:
● | foundation conditions |
● | maximum lift height |
● | closure slope criteria. |
Conservative RSF designs were developed in collaboration with MMTS to address the aforementioned design considerations using existing data. MMTS designed the RSF layouts, with geotechnical guidance on slope stability and geotechnical recommendations from KCB.
The RSFs will be built in progressive lifts (bottom-up construction) to initially confine toe areas and consolidate foundations to improve stability and reduce downslope risks.
18.2.5 | Mine Site Water Management |
Figure 18.4 illustrates ultimate water management structures as existing at the end of mine life showing diversion tunnel routes and operational phase surface diversions. Catchment boundaries are indicated with blue dashed lines.
Seabridge Gold Inc. | 18-12 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 18.4 Mine Site Ultimate Water Management Facilities
Source: KCB
Seabridge Gold Inc. | 18-13 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
After mining is complete, perimeter closure channels will be constructed at the top and margins of the RSFs, and the channels widened for closure along the toes of the RSFs. Operational phase channels are shown on Figure 18.4; closure routings are similar, fresh (non-contact) water routings are in blue and the routing of contact water is in green.
Diversion Tunnels and Surface Diversions
The MDT Inlets were shifted approximately 500 m upstream since the 2012 PFS (Tetra Tech, 2012) as a result of the Application/EIS (Rescan, 2013) to improve water quality of the diverted water. The open pit phase non-contact water MDT was enlarged to allow a single tunnel to carry design diversion flows. Upon commencement of underground mining, the open pit phase tunnel will be twinned with a second tunnel of the same dimensions to increase diversion capacity. There have been no changes to the design of the MTDTs or the Mine Site surface diversions since the 2012 PFS (Tetra Tech, 2012).
Contact Water Collection Systems
The MVDT is a 5 km long, 5 m by 6 m tunnel that drains to the WSF and provides routing of contact water around the Mitchel RSF. The tunnel connects to the NPWDA, which will be added in Year 5, to accept pit wall drainage and local drainage of contact water from upstream of Mitchell pit and from the Snowfields area.
The Mitchell and McTagg RSFs include a Selenium Seepage Collection System that is designed to collect up to 500 L/s of seepage and convey this flow to the Selenium WTP. Water from other sources will be treated when seepage collected from the RSFs is less than 500 L/s. The collection and treatment of seepage from these RSFs, and other high selenium loading waters, will enable selective removal of selenium from flows with higher selenium concentrations, compared to lower concentrations within the WSF. The Selenium Seepage Collection System will be operational by Year 5.
The Selenium WTP will discharge to the WSF to allow further treatment for metals removal.
Water Storage Facility
Seepage from the Mitchell RSF, McTagg RSF, and Sulphurets Pit Backfill RSF requiring treatment for the removal of metals by the HDS process will be collected in the lower Mine Site by the WSD. The WSD is an asphalt core rock fill dam that will create the WSF pond, and will be large enough to handle seasonal freshet flows as well as volume accumulated from a 200-year wet year.
Figure 18.5 shows monthly average water treatment rates for flows from the WSF as blue bars plotted over the LOM. The installed ultimate HDS water treatment capacity of 7.5 m3/s is greater than the annual average or monthly peak flows to allow the treatment rate to vary seasonally with stream flow rates.
Seabridge Gold Inc. | 18-14 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 18.5 Mine Site Monthly Water Treatment Rate
Source: KCB
The WSD design was updated after 2012 PFS (Tetra Tech, 2012) that included dam slope and internal zonation revisions (KCB, 2012d). The slopes and zonation of the dam are shown in section view in Figure 18.6.
The WSD will be located in the lower Mitchell Creek area and founded on competent rock. The WSD crest elevation is also unchanged from the ultimate dam height in the 2016 PFS and will be established at the full height of 716 masl (165 m height) before Year 1. An emergency spillway will be cut into rock on the southeast side of the dam. There will be appropriate freeboard for avalanche wave mitigation and flood routing.
Water in the WSF is predicted to be acidic, similar to existing seeps situated in the upper Mine Site. An asphalt core will be included in the dam to control seepage. Asphalt is inert with respect to acidic water. To control seepage, the WSD and WSF Seepage Dam foundations will be grouted. The depth of the WSD grout curtain is designed to vary from 25 m at the west abutment to as deep as 150 m at the east abutment if required. Grout hole spacing will be 2.5 m.
Fill for dam zones is specified such that critical zones of the dam (e.g., sections in contact with the core) and drain zones will be constructed with materials that have low potential to react with acidic water.
Seabridge Gold Inc. | 18-15 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
During the Application/EIS (Rescan, 2013) review process, additional mitigations were developed to minimize seepage from the WSD. These design enhancements are included in the 2016 PFS. Changes include six seepage interception tunnels that lower groundwater levels between the WSD and the WSF Seepage Dam to reduce the driving force on seepage. The seepage collection tunnels will also facilitate foundation grouting both during construction and for remedial grouting after completion of the WSD, if required.
An asphalt-core seepage collection dam will be located downstream of the WSF. Water collected in this dam will be sent to the WTP via an HDPE pipeline.
Seabridge Gold Inc. | 18-16 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 18.6 Water Storage Dam Sections
Source: KCB
Seabridge Gold Inc. | 18-17 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
The WSD CDT routes Mitchell Creek around the dam footprint during construction. The diversion tunnel size is designed as 4.4 m by 5.0 m and is sized to pass flows from a 50-year storm event. To reduce exposure to avalanche hazards, the downstream portal was moved upstream from where shown in the EA resulting in a total tunnel length of 900 m.
Hydroelectric Potential of Diversions
Diverting Mitchell and McTagg creeks into tunnels creates an opportunity for hydroelectric power generation. Generated power can be used during mine operations or sold to the grid via the power lines through the MTT. During operations, the hydroelectric plants will reduce the power requirements of the mine. Upon mine closure, the hydroelectric plants will continue operating and will generate income and offset water treatment costs.
The later stages of the MTDTs include hydroelectric generation that comes into operation in Phase 2 (Year 10) with an installed capacity of 8.0 MW. In Phase 2 of the RSF layouts the tunnels will be raised to have inlets above the expansion of the McTagg RSF; during Phase 3 (Year 15) the inlets will be raised again once the RSF reaches its ultimate extent.
Characteristics of hydroelectric plants installed on the diversions are similar to run-of-the-river installations, in that they provide peak power during freshet flows.
18.2.6 | Water Treatment |
Temporary Mine Area Construction Period Water Treatment
Temporary water treatment facilities and settling ponds are designed to meet current guidelines for mine sediment control and settling ponds.
During the construction period, six TWTPs for TSS and metal removal will be provided in the proposed mine area. Additional TWTPs will be located in the Saddle Area, and at the Treaty portal of the MTT. The TWTPs are intended to deal with drainage from existing mineralized zones, PAG cuts, tunnel portals, and runoff from PAG tunnel muck piles during the period before the permanent WTP is in operation.
The WSF and WTP will be in operation during the six-month pre-production period to capture sediment and runoff from mine area stripping and from fill placement during Mitchell OPC and haul road construction.
A total of eight TWTPs and associated collection ponds will operate during the construction period to manage potential metals, TSS, and ammonia in drainage from tunnel portals and from temporary stockpiles of tunnel muck near the portals and other flows of contact water (Table 18.3).
Seabridge Gold Inc. | 18-18 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Table 18.3 Temporary Water Treatment Plant Locations
TWTP | Location |
TWTP #1 | WSD/HDS WTP Area |
TWTP #2 | MTDT Outlet |
TWTP #3 | MDT Outlet |
TWTP #4 | Saddle MTT Portal Tunnel |
TWTP #5 | MDT Inlet |
TWTP #6 | MTT – Mitchell Portals |
TWTP #7 | WSD CDT Inlet |
TWTP #8 | Treaty MTT Portals |
Source: ERM
High density Sludge Water Treatment Plant
The HDS WTP is designed to treat water that comes in contact with areas of disturbance from mining operations and natural seeps in the area. Design of the WTP is unchanged since the 2016 PFS.
Water will be collected in the WSF. Drainage from the Mitchell pit and Mitchell/McTagg RSFs will be directed by gravity to the WSF and contact water from the Sulphurets and Kerr pit areas will be routed to the WSF by gravity pipeline. The water from the WSF will be pumped over the WSD to the HDS WTP. The HDS WTP is designed with variable discharge rates in order to stage discharge to match the natural hydrograph, to ensure sufficient dilution capacity to minimize any effects on the receiving environment.
The HDS WTP maximum throughput capacity will be 7.5 m3/s; however, the maximum rate is only anticipated to be required for a three-month period in the summer. Water pumped from the WSF will pass through hydroelectric generators installed at the Energy Recovery Power Plant, immediately upstream of the HDS WTP.
The HDS WTP installed generation capacity will be 9 MW and the two installed turbines will be capable of passing a flow of up to 7.5 m3/s.
The site selection for the HDS WTP is based on a 50+ year mine life and post-closure treatment for 200 years. The HDS WTP will be located at an elevation of 520 m on a flat benched terrain above the flood plain near the confluence of Mitchell and Sulphurets creeks.
During operation, the sludge will be transported year-round by truck to the Mitchell OPC and onto the ore trains within the MTT, where it will be transported with the ore to the stockpile located at the Treaty OPC, fed through the Treaty process plant, and deposited with the tailings in the TMF.
The three principal reagents for the HDS WTP will be quick lime, dry flocculant, and sulphuric acid for pH adjustment to 7.5. Table 18.4 provides an estimate of annual reagent consumption based on an annual average of 71 Mm3 of water treated. The predicted total annual volume of water will vary from 63 Mm3 to 79 Mm3. After closure, the predicted long-term volume of water for treatment will be 64 Mm3/a.
Seabridge Gold Inc. | 18-19 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Table 18.4 Annual Reagent Consumption for the HDS WTP
Reagent | Feed Rate |
Average
Annual
Water Treated (Mm3/a) |
Total
Annual
Reagent Consumption |
Quick lime to pH 10.5 | 0.83 kg/m3 | 71 | 59,000 t |
Magnafloc 10 | 3 g/m3 | 71 | 215 t |
H2SO4 to pH 7.5 | 11 mL/m3 of 36.8N H2SO4 | 71 | 780,000 L |
Source: ERM
Selenium Treatment Plant
Design of the Selenium Water Treatment Plant (Selenium WTP) is unchanged since the 2016 PFS. BioteQ Environmental Technologies Inc. (BioteQ) demonstrated selenium removal of spiked Mitchell Creek feed water during a pilot-scale ion exchange water treatment study (BioteQ, 2015).
The pilot study demonstrated reduction of selenium concentrations from 120 ppb and 320 ppb feed water to less than 1 ppb (BioteQ, 2015). The Selen-IX™ Ion Exchange Circuit is designed to selectively remove selenate from the feed water with a high efficiency in order to obtain the 1 ppb discharge limit, while concentrating the selenium into a small volume of brine solution that is directed to the eluate treatment circuit. The eluate treatment circuit removes selenium from the spent regenerant (or eluate) solution produced by the ion exchange circuit with an electro-reduction process using iron and fixes the selenium into an iron-selenium solid that is easily separated from solution. The solution discharged from the eluate treatment circuit is largely free of selenium and can be recycled back to the ion exchange circuit for re-use in resin regeneration.
As the Selenium WTP is only designed to remove selenium, effluent from the Selenium WTP will report to the WSF for further treatment at the HDS WTP, prior to discharge to the receiving environment.
18.2.7 | Tailings Management Facility Design |
The general layout of the TMF is shown in Figure 18.2. The TMF will be located within a cross-valley between Teigen and Treaty creeks. Three cells will be constructed: the North Cell and the South Cell will store flotation tailings, and the CIL Residue Cell (fully lined with a geomembrane) will contain PAG CIL residue tailings.
The cyclone sand dams will be constructed over earth fill starter dams using the centerline construction method with compacted cyclone sand shells and low-permeability glacial till cores. The Saddle and Splitter dam cores incorporate geomembranes to limit seepage from the CIL residue tailings. The dams will be progressively raised over their operating life to an ultimate elevation of 1,068 m.
Seabridge Gold Inc. | 18-20 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Seepage from the impoundment will be controlled with low-permeability zones in the tailings dams and dam foundation treatment. Seepage and runoff from the tailings dams will be collected downstream at seepage collection dams and pumped back to the TMF. The ponds behind the collection dams will also be used to settle solids eroded by runoff from the dam and fines from cyclone sand construction drain-down water.
Tailings Staging Plan
Tailings flows will be initially routed by gravity in slurry pipelines from the plant to the North Cell and CIL Residue Cell. Energy will be recovered during early years of operation of each cell from discharge of the tailings into the impoundment. Tailings will be pumped to the CIL Residue and South Cell when required during later stages of the operation.
Tailings will be retained by four cyclone sand tailings dams: the North Dam, Splitter Dam, Saddle Dam, and Southeast Dam. During operation, elevations of annual dam crest raises will be set to provide 12 months of tailings storage and to store the PMF with 1 m of freeboard.
Figure 18.7 illustrates the staging of the TMF. The North Cell will be constructed first and will store flotation tailings production for 25 years. During operation of the North Cell, floods will be routed south. A pipeline and surface channel will divert environmental maintenance flows of up to 2 m3/s from the East Catchment around the TMF into Teigen Creek. The North Cell will be closed after 25 years of operation and reclaimed over a five-year period. The CIL Residue Cell will be constructed and operated in parallel with the North Cell, and will be filled to about half its capacity with PAG CIL residue tailings. At Year 25, the South Cell goes into operation, providing flotation tailings storage for the remaining mine life. During this time, the East Catchment Tunnel will route East Catchment flood flows away from the South Cell. The CIL Residue Cell will be filled to ultimate capacity. The South Cell and CIL Residue Cell will then be closed and reclaimed over a five-year period.
Based on the mill ramp-up schedule, and the assumed density ranges possible at start up, the starter dams can store between 18 and 24 months of tailings. The earth fill starter dams at the North, Splitter and Saddle dam sites will be constructed to store a minimum of 8.4 Mm3 of water for mill start-up. The design operating PMF ranges from 42 Mm3 at start-up to 91 Mm3 at the ultimate dam elevation. The dams will then be raised annually by cycloning tailings sand. The beach will be built up to separate the reclaim pond from the dams by at least 700 m, increasing to 1,200 m at the ultimate dam elevation. The separation between the tailings dam and pond created by the beach increases the margin of safety against overtopping of the tailings dam, and reduces seepage through the tailings dam and underlying foundation.
A starter dam, at elevation 930 m, will be completed by Year 25 to allow deposition to begin in the South Cell. Between Year 25 and closure, the Southeast Dam will be raised to its ultimate elevation.
Seabridge Gold Inc. | 18-21 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 18.7 TMF Staging Plan
Note: Raising of cyclone dams within each stage is not shown on these diagrams.
Source: KCB
Seabridge Gold Inc. | 18-22 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
TMF Dam Structures
Over an initial two-year construction period, three earth fill starter dams will be constructed at the North Cell and CIL Residue Cell (North, Splitter and Saddle) to provide start-up flotation and CIL residue tailings storage. These dams will be progressively raised over their operating life to an ultimate elevation, providing storage capacity of 2.3 Bt. A summary of the tailings dams is provided in Table 18.5.
TMF Starter Dams
Starter dams will be earth fill embankments, with shells of compacted random fill supporting the central glacial till cores. The glacial till cores will be keyed into the underlying foundations to cut off seepage through weathered near-surface soils and any pervious strata. A blanket drain is provided to lower the phreatic levels in the downstream shell. Riprap erosion protection will not be placed on the upstream slope due to the temporary exposure of the dam to the pond water. Figure 18.8, Figure 18.9 and Figure 18.10 show typical sections of the starter dams.
Main Tailings Dams
The North, Splitter, Saddle, and Southeast dams will be compacted cyclone sand dams with glacial till cores constructed by the centerline method. Dimensions of the dams are summarized in Table 18.5. Details of the North, Splitter, Saddle, and Southeast dam designs are shown in Figure 18.8, Figure 18.9, and Figure 18.10.
A system of finger drains will be installed at the base of the downstream shells of the North, Saddle and Southeast dams to keep water levels in the dam depressed. Main drains in the centre of the valley floor will collect and convey seepage to the toe of the dam. Smaller secondary drains will convey water laterally into the main drains.
Seabridge Gold Inc. | 18-23 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Table 18.5 Tailings Dam Summary
Dam | Starter Dam | Ultimate Dam | ||||||||
Crest
Elevation (masl) |
Maximum
Height* (m) |
Crest
Length (m) |
Random Fill
Volume (Mm3) |
Core
Volume (Mm3) |
Crest
Elevation (masl) |
Maximum
Height* (m) |
Ultimate
Crest Length (m) |
Cyclone Sand
Volume (Mm3) |
Core Volume
above Starter (Mm3) |
|
North Dam | 930 | 80 | 680 | 3.59 | 0.95 | 1,068 | 218 | 1,900 | 47.16 | 3.42 |
Splitter Dam | 935 | 61 | 890 | 3.74 | 1.08 | 1,068 | 194 | 1,930 | 31.31 | 3.75 |
Saddle Dam | 935 | 35 | 780 | 2.09 | 0.75 | 1,068 | 168 | 1,600 | 22.99 | 3.39 |
Southeast Dam | 930 | 101 | 890 | 12.32 | 1.72 | 1,068 | 239 | 1,400 | 60.45 | 3.20 |
Totals | - | - | 3,240 | 21.73 | 4.50 | - | - | 6,830 | 161.91 | 13.77 |
Note: *maximum height measured at dam crestline
Source: KCB
Seabridge Gold Inc. | 18-24 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 18.8 North Tailings Dam
Source: KCB
Seabridge Gold Inc. | 18-25 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 18.9 Saddle and Splitter Tailings Dams
Source: KCB
Seabridge Gold Inc. | 18-26 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 18.10 Southeast Tailings Dam
Source: KCB
Seabridge Gold Inc. | 18-27 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
TMF Dam Construction
Table 18.5 summarizes fill requirements for the dams. For construction of the starter dams, general fill and core material will be excavated by a contractor fleet from local borrow sources (less than 2 km haul distance) that were identified at each dam site. The cyclone sand TMF dams will be raised using a fleet of dedicated mine equipment.
TMF Seepage Recovery Dams
Seepage recovery dams will be constructed of compacted glacial till in a similar manner as for the tailings starter dams, but with flatter 3H:1V upstream and downstream slopes.
TMF Area Water Management
Figure 18.11 shows the schematic water balance with water inputs and outputs from the impoundment.
Seabridge Gold Inc. | 18-28 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 18.11 Schematic TMF Water Cycle
Source: KCB
Seabridge Gold Inc. | 18-29 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
TMF Diversion Channels
Two main diversion channels, the Northeast Diversion and the South Diversion, will be constructed around the TMF North Cell with additional diversions around the Treaty OPC to divert non-contact runoff water into a tributary of Teigen Creek at the north end of the TMF.
Diversion channels are shown on Figure 18.12.
TMF Area Extreme Flood Routing and Storage
The TMF cells are designed to be able to store extreme flood events without discharge. Specifically, the PMF can be stored, which is a flood resulting from a 30-day Probable Maximum Precipitation (PMP) storm, combined with a 100-year 30-day snow melt. The perimeter diversions are assumed to be inoperative during this extreme flood event.
During operations, water will be reclaimed from the ponds and routed back to the Treaty OPC, where it will be treated as part of the mineral separation process. Surplus water from the TMF will be discharged seasonally via the Treaty Creek Diffuser. Discharge will occur during an approximate period extending from May to mid-November, when the creek flows are highest.
Seabridge Gold Inc. | 18-30 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 18.12 Ultimate TMF with Catchments and Diversion Channels
Source: KCB
Seabridge Gold Inc. | 18-31 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
18.3 | Tunnels |
A number of tunnels will be excavated during both the pre-production period and the operating period. These tunnels will be classified as either infrastructure tunnels or water tunnels. Table 18.6 summarizes tunnels constructed in pre-production and Table 18.7 summarizes tunnels constructed in the operational phase. Tunnels associated specifically with block cave mining, are presented in Section 16.3.
The infrastructure tunnels provide for the transportation of ore, personnel, and supplies between the Mitchell, Sulphurets, and Kerr mining areas and the Treaty OPC. The principal infrastructure tunnel is the MTT, which transports all mined ore from the Mitchell OPC to the Treaty OPC, and personnel and freight between the PTMA and the Mine Site, via the train haulage system. Other infrastructure tunnels include load out, unloading, and freight sidings in the MTT, a spur off the MTT to Iron Cap, and an ore conveyor tunnel from the Sulphurets pit to the Mitchell OPC.
The water tunnels include the diversion tunnels as described in the SWM Plan and the slope drainage tunnels for the Mitchell high wall and the Snowfields landslide.
This section includes a description of the construction method, sequencing, and cost basis for the tunnels as applied to the PFS schedule and capital estimate. The MTT design cross section has been modified since the EA to accommodate the change to train haulage from the previous ore conveyor system; however the alignment remains the same.
Table 18.6 KSM Pre-Production Tunnels Summary
Tunnel | Description |
Total
Length (m) |
Excavation
Volume (m3) |
Infrastructure Tunnels | |||
MTT | Principal Alignment | 49,406 | 1,266,770 |
Treaty Ore Handling | 514 | 27,174 | |
Mitchell Ore Handling | 943 | 43,784 | |
Mitchell Freight and Fuel | 576 | 28,898 | |
MTT Subtotal | 51,439 | 1,366,626 | |
Water Tunnels | |||
MDT – Open Pit Phase | Diversion Tunnel Inlets | 1,241 | 32,899 |
Access Tunnels | 870 | 20,402 | |
Main Diversion Tunnel | 7,000 | 185,570 | |
MDT Subtotal | 9,111 | 238,871 | |
MTDT | Stage I | 8,020 | 253,038 |
MVDT and Mitchell OPC Decline | - | 5,424 | 182,787 |
CDT at WSD | Construction Diversion Tunnel | 900 | 18,360 |
SCT at WSD | Seepage Collection Tunnels | 1,780 | 19,402 |
Pre-production Tunnels Total | - | 76,674 | 2,079,084 |
Note: | Tunnel volumes are based on construction volumes and account for drill hole “look out” contractor tolerance and up to 200 mm of shotcrete as required. |
Source: KCB
Seabridge Gold Inc. | 18-32 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Table 18.7 KSM Operational Phase Tunnels Summary
Tunnel | Description |
Total
Length (m) |
Excavation
Volume (m3) |
Infrastructure Tunnels | |||
Iron Cap Connection | - | 972 | 35,983 |
SMCT | - | 3,025 | 108,419 |
Water Tunnels | |||
MDT | |||
MDT – Underground Phase | Diversion Tunnel Inlets | 1,095 | 29,028 |
Access Tunnels | 812 | 29,516 | |
Main Diversion Tunnel | 7,000 | 185,570 | |
MDT Subtotal | 8,907 | 244,114 | |
MTDT | Stage II | 6,742 | 136,469 |
Stage III | 7,940 | 125,135 | |
MTDT Subtotal | 14,682 | 261,604 | |
NPWDA and SSDA | Main NPWDA | 3,000 | 100,260 |
Access Tunnels | 600 | 12,834 | |
Inlet Tunnels | 589 | 26,855 | |
SSDA | 1,104 | 22,345 | |
NPWDA and SSDA Subtotal | 5,293 | 162,294 | |
East Catchment Tunnel | at TMF | 4,000 | 67,733 |
Mitchell Block Cave Dewatering Tunnels | Underground Phase | 12,000 | 675,000 |
Operation Phase Tunnels Total | - | 48,879 | 1,555,147 |
Note: | Tunnel volumes are based on construction volumes and account for drill hole “look out” contractor tolerance and up to 200 mm of shotcrete as required. |
Source: KCB
18.3.1 | Mitchell-Treaty Tunnels |
The MTT is an electric rail-based twinned haulage system to handle all ore from the Mitchell mining areas to the Treaty OPC as well as personnel transport, supplies, and services between the two operating areas. Personnel transport includes mine side shift exchange as well as daily personnel interchange. Supplies and services include rail-based fuel tanks, explosives, mine operating supplies, maintenance parts and supplies, and an electric power line.
MTT Design
Primary crushing of ore from the Kerr, Sulphurets, and Mitchell open pits will be done proximal to each open pit. The crushed ore will be transported through the MTT to the crushed ore stockpile located at the Treaty OPC, approximately 23 km to the east. Future underground ore from the Mitchell and Iron Cap block cave mines will connect with the Mitchell-Treaty ore transport system. The twinned configuration provides higher capacity with the haulage loop and rail cross-overs allow sections of the tunnel to be isolated for periodic tunnel maintenance. Under normal operations, the North Tunnel will be designated for westbound travel and the South Tunnel will be designated for eastbound travel.
Seabridge Gold Inc. | 18-33 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
The MTT will comprise the following excavations:
● | two, 22,715 m long tunnels |
● | 75, 30 m long cross-cuts, linking the two tunnels |
- | 36 of these will be equipped with refuge stations |
● | nine track cross-overs to allow for flexibility and tunnel maintenance during operations |
● | Saddle Adit – a 265 m long decline at 15% complete with waste transfer chamber (for use during construction) |
● | various other excavations for ore bins, conveyor tunnels, escape raises, train unloading and freight/fuel handling areas. |
MTT Tunnel Support and Advance Rates
The length of the tunnel has been broken into 4 general ground support classes to account for the different rock types encountered based on field investigations comprising mapping drilling and testing. These support class segments are accounted for the tunnel advance rates, and costs per meter for costing and scheduling.
MTT Mining Method
The tunnels will be constructed in accordance with BC Mines Act and Health, Safety and Reclamation Code for Mines in BC using conventional drill and blast techniques, and will follow the conditions contained within the License of Occupation for the MTT issued in September 2013 by the Government of BC.
The MTT will be excavated by a contractor using conventional drill and blast with rail haulage to the portals. Electrical mining equipment will be used, reducing ventilation requirements. Excavated rock will be temporarily stored at the portals in managed facilities and relocated to permanent rock disposal sites when the permanent waste management plan is in operation.
Towards the end of the MTT construction period, the contractor will lay the track and install the electrical supply and distribution system for the ore trains.
Water Management
Both MTT tunnels will be driven with a ditch in the floor and excavated in the corner that will contain a perforated pipe for the collection of tunnel water during the operations period; the pipe will be buried under the track ballast. The nominal grade of the MTT is 1.2% down from the Treaty portals to the Mitchell portals; therefore, in operation the water in the tunnels will flow to the Mitchell portal where it will be routed to the WSF.
Seabridge Gold Inc. | 18-34 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
During construction, tunnel water will be collected and treated by temporary water treatment plants located near the portals.
MTT Mining Sequence
The MTT is on the construction critical path and has therefore been broken into two segments to allow for concurrent development workplaces resulting in a shorter total tunnel construction period. This preliminary sequence will be accomplished using the Saddle, which is a transverse valley along the tunnel alignment, located approximately 6.1 km from the Treaty Portal of the MTT and 16.6 km from the Mitchell portal. An adit will be driven at a negative grade from the Saddle and access both the north and south MTT tunnels. It will allow the Mitchell-Saddle segment of the MTT to be driven from two headings from either end of the segment, with four independent crews at one time. Additionally, two crews will be advancing the Treaty-Saddle segments from the Treaty portals, one in the North Tunnel and one in the South Tunnel.
Crews from the shorter Saddle to Treaty segment of the MTT will finish early and will then be used to develop the other excavations. The North and South tunnels will advance together both from the Mitchell and Saddle headings. As the twin headings advance, cross-cuts will be developed every 300 m joining the two tunnels. The cross-cut closest to the face will be used for remucking, the next closest cross-cut will be used for the ventilation cross-over and the cross-cut before that will be sealed and equipped with a refuge station.
Ventilation During Construction
Since there are three sets of two headings advancing together, there will be three primary ventilation circuits. The primary circuit will be established by installing two fans in a bulkhead just inside the portal in the South Tunnel (and near the entrance to the Saddle adit), to provide fresh air under positive pressure through the South Tunnel, and through the ventilation cross-cut with exhaust out the North Tunnel. The secondary circuits will be established to intercept fresh air from the primary circuits in order to ventilate the advancing faces. This will be done by two auxiliary fans with flexible vent ducting installed in the South Tunnel on the fresh air side of the active ventilation cross-cut and blowing air to the advancing headings in each of the South and North tunnels. The air from the South Tunnel will exhaust via the ventilation cross-cut where it will meet with the exhaust air from the North Tunnel. This exhaust air stream will then flow out the portal. As the tunnel faces advance, a new remuck cross-cut will be established and the previous remuck cross-cut will now act as the new ventilation cross-cut. The previous ventilation cross-cut will be sealed and equipped with the advancing refuge station.
Ventilation During Operations
During normal operations air will be moved through the tunnel by the piston effect of the trains. Thus, ventilation in the North Tunnel will generally be from east to west and ventilation in the South Tunnel will generally be from west to east.
To allow for segments of the MTT to be isolated for maintenance, sets of ventilation doors with axial vane fans will be installed at the portals and at the track cross-overs. In this way fresh air will be supplied to the isolated sections of track where the crews will be working. Energizing or de-energizing of fans will be coordinated with train traffic so that the fans will not move air against each other or against closed vent doors.
Seabridge Gold Inc. | 18-35 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
18.4 | Mine To Mill Ore Transport System |
At the Mitchell OPC, ore will be crushed and conveyed through a tunnel to two live underground bins within the MTT. Loading chutes under the bins will feed into trains that will transport the ore to an unloading station at the Treaty end of the MTT. The train cars will dump into a live underground unloading bin. Apron feeders will unload the bin onto a conveyor to transport the ore to the top of the Treaty COS.
Each train will consist of a 140 t electric locomotive and 16 x 42 m3 belly dump ore cars that have the capacity to deliver 800 t/h from Mitchell to Treaty based on 90-minute cycle times. On average, eight trains will be in operation to meet the process plant requirements with an additional four trains on standby to provide for mechanical availability or to handle an increase in plant feed of up to 10,000 t/h, when required to meet the process plant feed of 130,000 t/d. The transport system capacity was confirmed at PFS level by using a high-level train routing simulation that incorporates static modelling of the rail system and average cycle times between Mitchell and Treaty for delivery of ore, materials, and personnel.
The trains will travel on a conventional ballasted track structure with timber ties and operate via an electrical overhead catenary system. Trains will be controlled by an automated train control system managed from a remote control room. Loading chutes will also be controlled remotely and unloading chutes will operate autonomously. No onboard operators will be required within the tunnels during train system operation.
Figure 18.13 shows a plan view of the approximately 23 km long MTT dual track transport system. The South Tunnel will be primarily utilized for loaded trains travelling to Treaty OPC, and the North Tunnel will be utilized for empty trains travelling back to Mitchell OPC. The tunnels will run uphill from Mitchell OPC to Treaty OPC at a nominal 1.2% incline, such that tunnel drainage will flow to the Mine Site. Cross-overs are planned at both end points of the tunnel, as well as in two intermediate points to split the route into three sections. One section of the tunnel can be isolated when maintenance is required, and one-way traffic can be implemented and safely controlled by the train automation system. A simulation verified that these traffic flow restrictions will not compromise average daily train production requirements.
Seabridge Gold Inc. | 18-36 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 18.13 MTT Dual Track Plan View (Distances in Metres)
Source: MMTS
Seabridge Gold Inc. | 18-37 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
The numerical demarcations in Figure 18.13 show the distance, in meters, along the MTT tunnel of noted features from Mitchell to Treaty. The Golder Alignment refers to the planned access from a location near the Mitchell portal to the underground block cave operations.
Figure 18.14 shows a typical cross-section through both of the MTT train tunnels.
Figure 18.14 MTT Train Transport Drift Section (Dimensions in Millimeters)
Source: MMTS
The 140 t locomotives are powered by an electrical overhead 25 kV alternating current (AC) catenary system that includes:
● | two, 25 kV medium voltage substations |
● | three low-voltage substations equipped with a transformer 25 kV/0.6 kV/208 V, and 600 V/208 V control panel |
● | 12 rectifiers, 6 in the North Tunnel and 6 in the South Tunnel |
● | a Siemens SCAT SR aluminum overhead conductor rail system. |
Seabridge Gold Inc. | 18-38 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Loaded trains will travel on an uphill slope, requiring a tractive force of approximately 275 kN. At a speed of 30 km/h, power consumption of 2,400 kW per train is expected and will require a current draw of 1,600 A from the catenary at an operational voltage of 1,500 V. Empty trains travelling downhill at 50 km/h will feed approximately 400 kW of energy back into the grid.
The locomotives, as well as the loading and unloading chutes, will carry their own fire suppression systems, and will not require a fixed system within the tunnel.
An automated train dispatching system will be utilized to achieve a safe and efficient flow of trains through the tunnels,
As shown in Figure 18.13, two parallel underground spur lines coming off of the main tunnel will be used for train loading at the Mitchell end of the MTT.
Trains will be continuously loaded without the need to stop between cars. Each 42 m3 car can be loaded in an average of 36 seconds. The mine ore cars adopted for this PFS are end-hinged cars with an overlapping apron between the cars.
From the bottom of the bin, ore will discharge into two apron feeders and onto a conveyor belt that will transport the ore to the surface and feed to the Treaty COS.
18.4.1 | MTT Freight and Personnel Transport |
The train system will also be used for transportation of personnel and freight between the Treaty and Mitchell areas via the MTT. Freight and personnel transport will be scheduled on a daily basis, and the transport trains will be controlled by the automated train control system. Specially configured personnel and freight trains will transport personnel, freight, and fuel through the MTT, with marshalling and unloading areas at each end, separate from the ongoing ore transportation facilities. Personnel, freight, and fuel handling will only be scheduled during the day shift operations.
The train control system will ensure there is no haulage of fuel or explosives when personnel are being transported in the tunnels. In the event of an emergency, the personnel cars will be equipped with personal protective equipment (PPE) kits including self-rescuers. The twin tunnel configuration and cross-cuts provide alternate egress and rescue stations will be installed through the length of the MTT.
Treaty Staging Areas
Staging areas on surface, near the Treaty portal will be used to load personnel, freight, and fuel onto the specialty train cars. These staging areas will be road accessible and include a laydown area for all freight that is for transport through the MTT.
The personnel marshalling will be out of the North Tunnel and will include a structure to protect waiting passengers from the elements.
A train maintenance shop will be located in the freight marshalling area. The workshop facilities are enclosed in a building on the south side of the pad, located outside the Treaty portal. It also includes the control room for train system operations (see Figure 18.15).
Seabridge Gold Inc. | 18-39 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 18.15 Treaty Personnel, Freight, and Fuel Staging and Marshalling
Source: MMTS
Mitchell Staging Areas
Three separate, enclosed, underground staging areas near the Mitchell portal will be used to offload passengers, freight, and fuel, respectively (shown in Figure 18.16). Loaded fuel tanks and other hazardous freight will be shuttled out of the tunnel as soon as possible.
Personnel will exit the Mitchell portal by bus or other light vehicles.
Freight and fuel staging areas will include gantry cranes to offload the train payloads onto awaiting flatbed tractor-trailer units. Freight will be driven out to its ultimate destination at the Mine Site.
Seabridge Gold Inc. | 18-40 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 18.16 Mitchell Personnel, Freight, and Fuel Staging and Marshalling
Source: MMTS
18.5 | Site Roads |
Currently, the KSM Site can only be accessed by helicopter. Helicopter support will augment the road pioneering work and construction camps set up.
Avalanche protection will be constructed where appropriate so that work can be safely carried out at the tunnel portals. Rock storage landforms will be developed adjacent to the Mitchell pit.
The Mine Site roads are outlined in the Figure 18.17, with the starter pits outlines shown in blue.
Seabridge Gold Inc. | 18-41 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 18.17 Mine Site Roads
Source: MMTS
18.5.1 | Road Width |
Haul road widths were designed to comply with the following BC Mines Regulations:
● | for dual lane traffic, a travel width of not less than three times the width of the widest haul vehicle used on the road |
● | for single lane traffic, a travel width of not less than two times the width of the widest haul vehicle used on the road |
● | a berm height of at least three-quarters the height of the largest tire on any vehicle hauling along the road, where a drop-off of greater than 3 m exists. |
Ditches are included within the travel width allowance.
Seabridge Gold Inc. | 18-42 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
18.6 | Ancillary Buildings |
Ancillary building construction considered for the PFS will be pre-engineered, stick-built, or modular structures, as applicable. The HVAC for these buildings will be designed to industrial standards. The following ancillary buildings and infrastructure are included in the PFS:
● | Treaty OPC: |
- | fuel storage facility |
- | fuel distribution station |
- | administration building |
- | assay and metallurgical laboratories |
- | warehouse and maintenance building |
- | concentrate storage/load-out building |
- | cold storage/reagent storage building |
- | first-aid building |
- | ore train storage yard, maintenance shop and loading/unloading facilities |
- | permanent operations camp |
- | potable water treatment plant |
- | sewage treatment plant |
- | incinerator |
- | substation and auxiliary power supply facilities |
- | construction laydown areas |
- | pre-construction fuel storage |
● | EPCM and contractors’ offices, concrete batch plant, temporary construction camps, TWTPs, and numerous other construction related facilities |
● | Mitchell OPC and lower Mine Site areas: |
- | truck shop including first aid facilities |
- | HDS WTP with sludge storage facilities |
- | Selenium WTP (operational by Year 5) |
- | diesel fuel storage and dispensing |
- | permanent operations camp |
- | temporary construction camps |
- | sewage treatment plants |
- | incinerator |
● | off-site facility: |
- | new concentrate storage and loadout at the Stewart port facility. |
Seabridge Gold Inc. | 18-43 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
18.6.1 | Treaty OPC |
Fuel Storage and Distribution (Permanent and Construction)
The main fuel storage tanks at the Treaty OPC are sized to store 2,500,000 L, which accounts for 6 days of fuel demand. All fuel storage areas will be lined with containment berms and approved double-wall type tanks. Additional fuel stations will be located near the Mitchell OPC, truck shop, and at the Sulphurets and Kerr pits. Gasoline will also be similarly stored where required.
The majority of the fuel requirement is for mining activities at Mitchell; however, some fuel will be distributed to all Treaty OPC facilities via pipelines from the Treaty Fuel Storage Tank to the required facilities.
A pipeline from the Treaty fuel storage tank to the train marshalling area will be installed, with hook-ups for fast fuel transfer directly to the ISO fuel tanks at the marshalling area. Wherever possible, the ISO fuel tanks will not be removed from the train cars on the Treaty end.
Administration Building
The pre-engineered administration building will be approximately 1,000 m2 in plan area.
Assay, Metallurgical, Acid-base Accounting, and Geotechnical Laboratory
The pre-engineered laboratory will be a 815 m2 single-storey structure located in a separate building near the process plant at the Treaty OPC.
First Aid Buildings
The first aid buildings will be pre-engineered structures, located at both the Mine Site and Treaty OPC, equipped with first aid facilities and provide emergency vehicle storage.
Concentrate Storage
The on-site concentrate storage facility will be a pre-engineered structure, approximately 2,000 m2 in area. It will have a five-day storage capacity equating to approximately 4,600 t of concentrate.
Cold Storage/Reagent Storage Building
The cold storage/reagent storage building will be located at the Treaty OPC and will be approximately 1,200 m2 in area.
Permanent Camp
The Treaty operations camp will be located at the PTMA, approximately 600m southwest from the process plant. The camp components will include accommodation, office/recreation complex, kitchen/diner, parking, sanitary sewer, potable water treatment, wastewater treatment and disposal field.
Warehouse and Maintenance Building
An 800 m2 warehouse and maintenance pre-engineered building will be constructed at the Treaty OPC. It will be located adjacent to the cold storage facility.
Seabridge Gold Inc. | 18-44 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
18.6.2 | Mine Site |
Truck Shop
The Mine Site truck shop will be a pre-engineered building, approximately 9,500 m2 in area. The truck shop/mine dry will comprise eight maintenance bays, two light vehicle repair bays, a truck lube bay, a truck wash bay, a welding and machine shop, an electrical and instrument shop, a storage warehouse and a dry area.
Acid-base Accounting and Geotechnical Laboratory
The pre-engineered laboratory will be a 815 m2 single-storey structure located in a separate building near the truck shop.
Permanent Camp
The Mitchell operations camp will be located between Sulphurets and Gingras creeks, just north of the CCAR. Like the Treaty operating camp, the Mitchell operating camp is planned to be used for most of the construction period and the entire life of mine.
The camp components will include a helipad, sleeping dorms, parking, fuel storage and loading area, recreation facility, sewage treatment, fire/fresh water tanks, an emergency generator, laundry, and kitchen/diner.
Landfills
Two landfills are proposed to be permitted and developed, one for the Mine Site and one for the PTMA.
The Mine Site landfill, which will occupy approximately 6.5 ha, will be located within the Sulphurets laydown area.
The PTMA landfill, occupying approximately 8.4 ha, will be located near the Treaty operating camp.
Each landfill will include a land farm. The land farms will accept contaminated soils from spill clean-ups and leaks, while the landfill will be used to dispose of non-inert, dry industrial, and forestry waste.
18.7 | Sewage |
The wastewater treatment system installed at the construction and operation camps in both Mine Site and PTMA will treat the anticipated maximum daily flow through a variety of processes to meet a secondary level of treatment as defined in the Municipal Wastewater Regulation (MWR) (BC Reg. 87/2012) of the Environmental Management Act (2003).
For temporary construction camps off site with occupancy less than 100, Type 3 effluent quality as defined in the Public Health Act (2008) sewerage guidelines will be applicable to the sewage requirements for these camps.
Seabridge Gold Inc. | 18-45 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
18.8 | Communications System |
Permanent communications utilizing fibre optic cables will be installed over the existing NTL, and the new 30 km spur transmission line to the Treaty OPC. Installation of fibre-optic cable on site will also allow for the installation of dedicated cellular service.
A fibre optic communication system will be installed in conjunction with the power distribution system in both the Treaty OPC and the Mine Site. A fibre-optic cable has been included in the MTT to provide communications between Treaty OPC and the Mine Site.
An ultra-high frequency (UHF) radio system will be used for mobile communications in both the PTMA and the Mine Site. Base stations and repeaters will be installed as necessary on ground and inside tunnels.
Treaty OPC wired telephone service will be provided by a Voice over Internet Protocol (VoIP) system. A local cell phone system is also planned, as is satellite television for the camps.
In addition, uninterruptible power supplies will be used to provide backup power to communication systems and critical control systems to facilitate orderly shutdown of process equipment and to back up computers and control systems.
18.9 | Fresh and Potable Water Supply |
Fresh and potable water for the Treaty OPC will be supplied from nearby wells to an elevated storage tank approximately 12 m in diameter and 9 m in height. Fresh water will be used primarily as:
● | fire water for emergencies |
● | cooling water for mill motors, mill lubrication systems and reagent preparation |
● | the potable water supply. |
18.10 | Power Supply and Primary Distribution |
Power generation and transmission utilities in BC are regulated by the British Columbia Utilities Commission (BCUC), acting under the Utilities Commission Act. BC Hydro generates the majority of power in BC, although there are an increasing number of private Independent Power Producers (IPPs). BC Hydro owns and operates the major transmission and distribution system in BC and is the electric utility that would serve the KSM Mine via the recently constructed NTL.
The utility interconnection capital cost for the KSM Mine will be as set out in the facilities agreement, an arrangement approved by the BCUC in January 1991, pursuant to Order G-4-91 that sets out the rights and obligations of BC Hydro and the customer for construction, ownership, and operation of the facilities necessary for electric service.
Seabridge Gold Inc. | 18-46 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
18.10.1 | Northwest Transmission Line |
The 344 km long, 287 kV NTL runs from the Skeena substation near Terrace, BC, to a new substation near Bob Quinn Lake (Figure 18.18). This new transmission line was commissioned in the summer of 2014 and currently serves the AltaGas Forrest Kerr Hydroelectric Facility and the Red Chris Mine. A tap from this transmission line will service the KSM Mine.
Due to an overrun in the construction cost of the NTL, BC Hydro Tariff Supplement TS37, as approved by the BCUC, was put in place requiring NTL customers to share in the overrun cost. In accordance with TS37, based on a KSM contract (peak) demand of 200 MVA, the required contribution will be just over Cdn$209 million. This amount is separate from system reinforcement and is a required cash contribution. Payment of the tariff is not due until the start of commercial production, and BC Hydro offers the option of spreading the payments out over five years, with an applicable finance charge. This required cost contribution is included in the 2016 PFS sustaining capital costs.
Figure 18.18 NTL Route Map
Source: BC Hydro
Seabridge Gold Inc. | 18-47 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
18.10.2 | Treaty Creek Switching Station |
BC Hydro is responsible to deliver power from the transmission system to a customer at the point of delivery (POD). The customer is responsible to bring power from the POD to their site. For KSM, the POD will be the Treaty Creek Switching Station. The KSM site will take electrical service via a 30 km long, 287 kV line extension from the Treaty Creek Switching Station, to be located on the NTL adjacent to Highway 37, approximately 18 km south of Bell II. This installation will also be in the vicinity of the Treaty Creek Access Road junction with Highway 37. Metering will also be located at this point. The Treaty Creek Switching Station will form part of the BC Hydro system and will be constructed, owned, and operated by BC Hydro. BC Hydro has completed site selection and preliminary design.
Seabridge previously reimbursed BC Hydro for the cost of installing transmission line dead end structures when the NTL was constructed, as required to facilitate the connection of the of the proposed Treaty Creek Switching Station into the grid.
The power supply facility infrastructure will include BC Hydro System Reinforcement and the Basic Line Extension, which is the circuit breaker and metering at the POD. It is not the transmission line to the KSM site. Construction of the Treaty Creek Switching Station, as per the BC Hydro Facilities Study, will require a direct cash payment from the developer of KSM to cover a large part of the cost of the installation that is classified as the Basic Line Extension. This cost is included in the 2016 PFS capital cost estimate. The remaining station cost is classified as System Reinforcement and is not a KSM development capital cost. However, Tariff Supplement (TS) No. 6 (TS 6) Clause 5 (c) “Offset” requires that the customer provide bonding for up to seven years, such that BC Hydro is assured of receiving enough revenue from the KSM operation to justify the capital expenditure. Security is required in the form specified in TS 6 Clause 13 and in the amount as per Clause 5(b). The foregoing bonding and charges are set out under the tariffs and are not negotiable. BC Hydro will return part of the security each year as the offset, based on power billing, reduces the required bonding. The amount of the bonding is not included under the direct capital cost budget, but is otherwise accounted for in the 2016 PFS economics. An important point to note is that as per the tariffs, the customer must pay the actual final cost of construction, not the amount estimated by BC Hydro in a Facilities Study.
BC Hydro is responsible for obtaining all approvals and permits for the Treaty Creek Switching Station. A formal environmental assessment of the Treaty Creek Switching Station under BC’s environmental assessment process for reviewing major projects is not required.
18.10.3 | Transmission Line Extension To KSM |
The voltage selection for the proposed 287 kV transmission line extension for KSM was based on the 287 kV transmission voltage selected for the NTL. A review of the technical requirements to serve a load larger than 150 MVA confirmed that stepping the voltage down to a lower level is not technically acceptable nor economic.
The developer/operator of KSM Mine will be responsible for the construction and operation of the transmission line extension, in accordance with the established BC Hydro tariff requirements. Line construction will utilize steel monopoles, such that the line can be generally run in the TCAR right-of-way, beside the road, thus largely eliminating the requirement for a separate access route.
Seabridge Gold Inc. | 18-48 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
The 287 kV transmission line from the BC Hydro Treaty Creek Switching Station will cross Highway 37 and the Bell-Irving River, then closely follow the mine access road along the north side of Treaty Creek for approximately 12 km to a deviation point where the line transitions from following the TCAR, to following the South Diversion Cut-off Ditch, up to Substation No. 1 at the Treaty OPC. Steel monopoles are ideal for use where a transmission line is to be constructed next to a road and in areas of high snow fall. To protect against avalanche damage, several structures will be mounted on concrete piers, to raise the pole bases above the avalanche flow.
The environmental assessment for the 30 km section of transmission line from Treaty Creek to Substation No. 1 was included in the EA; therefore, approval is in place. Land tenure has been obtained for the transmission line right-of-way, from the Treaty Creek Switching Station to Substation No. 1 at the Treaty OPC.
The transmission line includes a fibre optic cable connection to the BC Hydro NTL fibre-optic cable system as required by the utility. This fibre connection will also carry the general communications to site for the permanent operations phase.
The transmission line land tenure has been obtained. No additional (specific) permits will be required other than the general mine permitting. The cost of right-of-way clearing is included in the road clearing budget.
18.10.4 | System Studies |
BC Hydro performs studies to determine the cost, method, and timing of transmission system customer interconnections. Seabridge first commissioned a BC Hydro System Impact Study (SIS) for KSM in 2009 to confirm the technical viability of the interconnection. Subsequently, several updates were commissioned to account for the construction of the NTL and several design changes, including changes to the KSM Site access route from Highway 37.
System load flow studies have been performed by PFS consultants using system analysis software to confirm process plant and mine power system voltage control from no load to full load. System voltage stabilization is based on switched reactors to control light load over voltages due to 287 kV transmission line and 138 kV cable capacitance, and also assumes power transformers have automatic tap changers and that there is automatic control of the process plant synchronous ball mill drive motor excitation systems for instantaneous voltage control, as requested by BC Hydro. Substation No. 1 also includes a ±20 MVA static var compensator, as identified by the BC Hydro SIS as required, to ensure system transient stability.
Service from the Skeena Substation to the KSM Site via the NTL will be delivered over a single-circuit line. BC Hydro service studies indicate very high reliability for single-circuit high-voltage transmission lines, with few outage-hours in a year. Occasional service interruptions and planned maintenance outages can be expected and are considered normal for mining projects.
Seabridge Gold Inc. | 18-49 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
18.10.5 | Electric Utility Requirements, Tariffs, And Cost of Electric Power |
The electric service to the KSM Site (including all terms and conditions such as rates and metering requirements, connection charges, and many aspects of the KSM connecting transmission line) will be in accordance with the latest edition of BC Hydro Electric Tariffs, in particular:
● | Rate Schedule 1823 – Transmission Service – Stepped Rate |
● | Rate Schedule 1901 – Deferral Account Rate Rider |
● | BC Hydro Electric Tariff Supplement No. 5 (TS5) Agreement for Customers Taking Electricity under 1821 (1821 is now 1823) (TS5 is a template for the Electricity Supply Agreement with the format set as per the tariffs and is not subject to change) |
● | BC Hydro Electric Tariff Supplement No. 6 (TS6) Agreement for Transmission Service Customers (TS6 is a fill in the blanks template for the Facilities Agreement with the format set as per the tariffs and is not subject to change) |
● | BC Hydro Electric Tariff Supplement No. 37 (TS37) covering the required NTL “overrun” Contribution |
● | BC Hydro Electric Tariff Supplement No. 74 (TS74) Customer Baseline Load Determination Guidelines. |
BC Hydro Rate Schedule 1823 is a two-tier schedule, nominally with 90% of the Customer Baseline Load charged at economical Tier 1 energy rates, and the last 10%, plus all power above the Customer Baseline Load, charged at costly Tier 2 rates. This system is designed to encourage energy conservation, as consumption reductions due to energy conservation measures are applied against costly Tier 2 power. BC Hydro, under their Power Smart program for demand side load control, offer incentives to transmission customers to reduce energy consumption, and for new customers incentives are given for energy-efficient plant design.
The calculated cost is below regular rates due to a large reduction or elimination of costly Tier 2 energy in accordance with an efficient plant design as accepted by BC Hydro’s “Power Smart” program. Thus, HPGR energy savings have an impact far greater than just the energy savings in the grinding area. A separate report to BC Hydro has confirmed that the use of HPGRs for KSM qualifies for these incentives.
TS6 currently requires potentially large non-refundable 500 kV transmission and generation system reinforcement charges for operations with a Contract Demand of over 150 MVA. This would apply to KSM and the required capital contribution would apply to the entire load, not just the load that exceeds 150 MVA. The Contract Demand (peak load) for KSM is currently estimated to be well above 150 MVA, even considering that energy conservation measures will be implemented. Seabridge currently has an application before BC Hydro for an increase in the Contract Demand from 150 MVA to 200 MVA, with the expectation that the generation reinforcement charges will be set at zero and 500 kV system reinforcement charges will only apply to the additional 50 MVA of Contract Demand, not the entire load, reflecting the state of the current system. However, as this is uncertain, and a determination will not be made until after publication of this PFS, a combustion turbine has been allotted for in the estimates for peaking purposes, as this is far more economical than the application of the currently applicable reinforcement charges (TS6).
Seabridge Gold Inc. | 18-50 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
The cost of power for KSM, delivered to the 25 kV bus bars of the Treaty OPC, has been estimated as Cdn$0.062/kWh, including applicable taxes and energy cost savings due to BC Hydro’s Power Smart program. The KSM power cost includes the transmission line losses from the metering point at the Treaty Creek Switching Station, plus Substations No. 1 and No. 2 transformer losses and peaking power cost.
The KSM power cost calculation takes into account reduced rates due to BC Hydro Demand Side Management (DSM) and associated Power Smart initiatives for energy conservation measures designed into new plants (such as using HPGR grinding in lieu of SAG milling). Such measures, as may be certified by BC Hydro, serve to reduce the standard 10% of energy under the two-tier 1823 Rate Schedule that would fall under the costlier Tier 2 category. If HPGR grinding and similar energy conservation measures were not to be implemented, there would not only be greater energy consumption, but the cost of electric power for the entire KSM operation would increase.
Each year on April 1 (the start of their fiscal year), BC Hydro sets new rates that are applied in accordance with the tariffs, subject to BCUC approval.
18.10.6 | Treaty Plant Main Substation No. 1 |
The KSM 287 kV step-down Substation No. 1 will be located at the Treaty OPC and will be constructed and owned by Seabridge in accordance with BC Hydro policy, which is also the most economical solution. This substation is a critical installation for KSM. The substation equipment has been sized based on the latest PFS load list. Redundant transformer capacity was included in the design. The substation will be a GIS switchgear) design, utilizing 138 kV and 287 kV gas insulated circuit breakers and bus bars, allowing a compact design contained in a building adjacent to the Treaty process plant. The circuit breakers will use point-on-wave switching as required by BC Hydro. Connections to transformers will use high-voltage solid dielectric cables.
The substation will include:
● | three transformers, each of the three winding type oil filled 75/100/125 MVA, ONAN/ONAF1/ONAF2 step down power transformers, with automatic on-line tap changers |
● | six 287 kV GIS circuit breakers |
● | seven 138 kV GIS circuit breakers |
● | one 287 kV switched reactor for compensation of the incoming 287 kV line, to limit Ferranti effect over voltages |
Seabridge Gold Inc. | 18-51 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
● | two 138 kV switched reactors at the OPC end of the 24 km long, 138 kV cable to compensate for cable capacitance, thus controlling bus voltage |
● | 25 kV grounding transformers and resistors. |
The three transformers included in Substation No.1 will be installed in a concrete vault. They will provide redundancy, allowing one transformer to be out of service. Shipping restrictions to the site were taken into account when sizing the transformers. The 138 kV tertiary windings will be connected to the 24 km long tunnel cables feeding the Mitchell (open pit mine) area Substation No. 2. Space has been allocated for a future fourth power transformer.
Substation No. 1 will also include a line-up of 25 kV metalclad or GIS switchgear, including all 25 kV circuit breakers required for power distribution to the process plant and around the Treaty OPC. The secondary distribution voltage for the Treaty OPC will be 25 kV.
Substation No. 1 does not include harmonic filters. If these are required by harmonic generating plant loads, they would be best located at the process plant near the harmonic sources.
18.10.7 | 138 kV Cable |
Substation
No. 1 will be interconnected with Substation No. 2 by three, 138 kV, single-core, 300 mm2, cross-linked polyethylene
(XLPE) solid dielectric power cables suspended from the back (roof) in one of the MTT that will run between the two plant sites.
The 300 mm2 (600 kcmils) conductor size quoted is the minimum physical size that vendors typically manufacture
at 138 kV (due to the electric field gradient at the conductor). This is a more than adequate capacity to
carry any anticipated load, including allowance for the cable charging current. In order to limit induced sheath currents, the
cable sheaths will be “cross bonded”, which is the normal design for high-voltage, high-current, single-core cable
installations. Adequate (significant) space must be allowed in one of the train tunnels for these cables.
18.10.8 | Mitchell Substation No. 2 |
The 138 to 69 kV - 25 kV Substation No. 2 is also a critical infrastructure for KSM. As an alternative to a standard 138 kV air-insulated outdoor substation, Substation No. 2 is planned to be a GIS installation. This is a very compact design, requiring only a fraction of the space of a conventional air insulated high voltage substation and allows for the total installation to be included in a reinforced concrete building that provides a high degree of protection against geo-hazards such as avalanches. It also eliminates hazardous high-voltage overhead lines in the vicinity of the Mitchell OPC and requires much less plant area. The substation includes:
● | two 138 - 69 - 25 kV, 55/73/90 MVA ONAN/ONAF1/ONAF2, oil filled power transformers with automatic on-line tap changers (two, 3 phase units are provided for redundant capacity, with space provided for a third unit to cater to future load growth) |
Seabridge Gold Inc. | 18-52 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
● | six 138 kV GIS circuit breakers and associated bus work |
● | two switched 138 kV reactors to compensate 138 kV cable capacitance |
● | six 69 kV GIS circuit breakers connecting to site 69 kV power distribution system to the facilities more remote from the No. 2 Mitchell Substation site |
● | grounding transformers and resistors |
● | a line-up of 25 kV metalclad or GIS switchgear for site local power distribution including 25 kV circuit breakers for all local power distribution. |
18.10.9 | Site Power Distribution |
Site power distribution in the mine area from Substation No. 2 will be by 25 kV cables and overhead pole lines locally and by 69 kV overhead pole lines to feed large loads at more distant facilities where modular substations will step the 69 kV down to the local distribution voltage. The relatively long distances and high initial and future pumping loads require 69 kV distribution to transmit the power and limit voltage drop.
18.10.10 | Mine Power |
Power to the Mitchell open pit itself will be provided by local 25 kV overhead distribution lines. The required pit 25-7.2 kV portable substations (also serving as pit switch-houses), and trailing cables for the 7.2 kV pit mobile electric shovels and drills, are included in the electrical power budget. 7.2 kV to 600 V portable substations are also included for pit dewatering. Similar installations are included in sustaining capital or the Sulphurets and Kerr open pits.
18.10.11 | Construction and Standby Power |
Modular diesel generator sets will be provided to supply construction power for tunnel driving, camps, temporary water treatment plants, plant construction sites, and other initial construction-related facilities. The capital and operating costs of these facilities plus local distribution including step-down transformers and overhead pole lines have been included in construction indirect costs. Fuel and operating costs for construction power are also accounted for in the construction indirect costs. The power distribution costs for supply and installation of cable and electric panel boards within the various tunnels are included in tunnelling costs.
Any additional costs for moving equipment and fuel to site during the early stages of the KSM construction, either by helicopter or by a glacier road, are included elsewhere in the capital cost estimate and are not in the construction power budget.
The construction generating stations are modular, complete with switchgear, and designed for PLC automatic unattended operation. Environmentally approved double-walled fuel storage tanks and associated piping are included for each power station.
Several of the construction gensets will be retained after initial construction is complete and reconfigured to serve as future standby/emergency generation for the mine, process plant, and accommodation centres. The cost to refurbish construction gensets and reconnect this equipment for standby service in the permanent plant was included in the process plant electrical budget.
The estimates include the purchase rather than rental of construction gensets. The relatively very long KSM construction period will make construction genset rental uneconomic.
Seabridge Gold Inc. | 18-53 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
18.10.12 | Energy Recovery and Self Generation |
There are several opportunities for energy recovery from process flows, as well as power generation from mini-hydro plants, taking advantage of water flows that must otherwise be diverted around the mining operations. As these energy recovery and mini hydro schemes, to a large extent, make use of facilities otherwise required for KSM, they are generally economically attractive and will also reduce the total energy consumption of the KSM operation. The value of the generated power would be at the BC Hydro rate schedule 1823 Tier 2 energy (set at BC Hydro’s marginal cost of generation).
All of the listed energy recovery plants will be located within the KSM mining lease. The energy recovery plants recover energy from process plant flows.
All of the generating plants, similar to small IPP hydroelectric plants, will operate unattended and will be automatically controlled by PLC systems. The locally generated power will be fed into the 25 kV mine distribution power lines.
The generation facilities included in this PFS are summarized in Table 18.8.
Table 18.8 Mini Hydro and Energy Recovery Power Generation
Name | Type |
Installed
Capacity (kW) |
Net
Annual
Generation (kWh) |
Machines |
WTP* | Energy Recovery | 9,000 | 23,773,000 | Pelton Turbines |
Tailings | Energy Recovery | 1,194 | 7,794,060 | Pumps as Turbines |
Mitchell Diversion* | Mini Hydro | 7,500 | 17,638,000 | Pelton Turbine |
McTagg Stage 2 Diversion (Years 10 to 15) | Mini Hydro | 8,000 | 32,981,000 | Pelton Turbine |
McTagg Stage 3 Diversion* and **(Year 15 onwards) | Mini Hydro | 12,000 | 45,242,000 | Pelton Turbine |
Notes: |
*Operation
continues after mine closure.
**McTagg Stage 3 replaces Stage 2. |
Seabridge Gold Inc. | 18-54 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
18.11 | Treaty OPC and Mine Site Secondary Electrical Power Distribution And Utilization |
18.11.1 | Mine And Plant Power Consumption |
The total mine and process plant annual energy consumption is estimated to be 1,333 GWh based on the Tetra Tech (HPGR) load list for a 130,000 t/d operation valid on average for Years 1 to 5, based on the currently proposed blending of ore. This equates to an average annual load of 152 MW. With a load factor (LF) in the range of 0.85 as typical for a property such as KSM, the peak load (30-minute demand) is estimated as 179 MW. The plant running (normal every day) load is estimated to be 167 MW, again based on norms for this type of mine and milling operation.
The required utility supply will be reduced in the summer and fall by self-generation from energy recovery and mini-hydro plants. During the winter low stream flow conditions, the average self-generation will be almost zero. To prevent the KSM operational demand from exceeding the 150 MW trigger point for generation reinforcement, the proposed peaking combustion turbine, located in at the Treaty OPC, will be operated.
18.11.2 | Power Distribution – Treaty Plant Main Substation No. 1 |
For a discussion of power distribution refer to Clause 18.10.6 Treaty Plant Main Substation No. 1.
Ball Mills
The ball mills as planned were integrated into BC Hydro’s SIS and any changes to these drives will require a new BC Hydro SIS and potentially a new Facilities study.
The Treaty process plant ball mills are major power consumers. Each of the four ball mills (rated 14,000 kW each) will be fed via dedicated 25 kV feeders and step-down transformers to 13.8 kV. The mills will each be equipped with two, 10,000 hp, low-speed “Quadratorque” fixed speed synchronous motors, directly driving mill dual pinions via air clutches, as has been used in the industry for many years.
Step-down to 4.16 kV
The ball mills will be fed at 13.8 kV. Other large fixed speed motors (generally those rated 250 hp and greater) and large variable speed drives (generally those rated over 400 hp) will be fed at 4,160 V. The 4,160 V supply will be derived from 25 kV to 4,160 V outdoor liquid filled step-down transformers. Redundancy will be provided by utilizing sets of two transformers, each feeding a 4,160 V metal clad switchgear line-up with the two line-ups connected by a tire breaker that may be closed if one of the transformers fails or must be taken out of service.
Step-down to 600 V
Motors and other loads below 250 hp will be fed from one of several 600 V systems. Generally, these systems will consist of liquid insulated 25 kV to 600 V step-down transformers, feeding two line-ups of 600 V power distribution centres (with tie breaker), which in turn feed a series of 600 V motor control centres (MCCs). General power and lighting will also be fed from the 600 V system.
Seabridge Gold Inc. | 18-55 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Remote Loads
Remote Treaty OPC loads will be served by 25 kV overhead lines. Examples of remote loads include, fresh water pumping, the TMF return water and seepage pumps and ancillary buildings.
18.11.3 | Mitchell Substation No. 2 |
For a discussion of power distribution refer to Clause 18.10.8, Mitchell Substation No.2.
Power Feed to Pits and Primary Crusher
The Mitchell primary crusher will be fed from the substation by a 25 kV cable. The Mitchell pit overhead power line will be fed from a section cable leading into the substation.
The mining electric shovels and drills will be served at 7.2 kV via portable 25 to 7.2 kV step-down substations fed from the perimeter pit pole line. The estimates include appropriate lengths of trailing cable and couplers. 7.2 kV to 600 V portable step-down substations and trailing cables are also included for pit dewatering.
A 69 kV GIS circuit breaker and cable will feed an overhead pole line supplying remote loads including the truck shop, WTP, Selenium WTP, WSD pumping, explosives facility, permanent camp, and also connecting to the mini hydro and energy recovery power plants. There will be local substations stepping down from 69 kV to the local distribution voltage.
Seabridge Gold Inc. | 18-56 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
18.12 | Permanent and Construction Access Roads |
The Mine Site and PTMA construction will require a combination of permanent and temporary access roads. Preliminary design work was performed pre-2009 utilizing remote sensing data (LiDAR) and was groundtruthed between 2009 and 2012. Primary access to the mine during construction will be via the CCAR and TCAR, with a winter access road being utilized during the initial construction phase. In total, 9 roads are proposed with varying design criteria that match that anticipated traffic volumes generated at the Mine Site and PTMA during construction and operation. A map outlining the proposed roads is shown in Figure 18.19.
Current proposed permanent access roads include the existing 59 km long resource access route from Highway 37 to the former Eskay Creek Mine and camp facilities. The proposed 35 km long CCAR will commence near the southern limit of this existing road, and extend south then west to the proposed Mine Site.
The Treaty Creek Valley road network provides access to the Treaty OPC, the TMF, and the MTT Saddle Area. It will include a 30 km two-lane access route from Highway 37 to the Treaty OPC, TMF, and east portal of the MTT, and include portions of the TCAR and NTAR.
The current proposed access roads include the:
● | Eskay Creek Mine Route |
● | CCAR |
● | TCAR |
● | Lower NTAR (early mine life) |
● | Upper NTAR (early and mid-mine life) |
● | Cut-off Ditch Access Road |
● | TMF Service Roads |
● | Frank Mackie Winter Access Road (design by Tetra Tech). |
Seabridge Gold Inc. | 18-57 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 18.19 Proposed Access Roads Network
Seabridge Gold Inc. | 18-58 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
18.12.1 | Route Descriptions |
The current updated route descriptions, including relocations of the road alignments, are provided in the following sections.
Eskay Creek Mine Access Route
Seabridge plans to use portions of the existing Eskay Creek Mine Access Road, linking Highway 37 to the proposed CCAR.
This road was constructed in 1993 to provide access to Homestake Canada Inc. Eskay Creek Mine. In 2002 the mine was assumed by Barrick Gold until its closure in 2008. The property is now under option with Skeena Resources Ltd. The road commences at Highway 37, south of the Bob Quinn Forest Service Road, and follows the Iskut River Valley west for approximately 38 km to the crossing of Volcano Creek. The road was originally designed as a single lane, 5 m wide gravel road, with a nominal design speed of 60 km/h. Substantial portions are built to a nominal 8 m wide (double-lane standard), providing ample passing opportunities.
An overview evaluation of the road condition and its suitability for Seabridge’s requirements was conducted; findings are summarized in McElhanney (2013).
Coulter Creek Access Road
The CCAR will be constructed as a single lane (6 m surface), radio-assisted road with pullouts.
Heading southwest from near the end of the existing Eskay Creek Mine Access road (approximately 59 km off of Highway 37), this road will follow an existing mine access road for approximately three or more kilometres towards Tom MacKay Lake. It will then descend out of the alpine meadows, along the height of land between Coulter Creek and the Unuk River.
The proposed three-span bridge crossing of the Unuk River will be 88 m in length. The Unuk River is a major crossing and will need to meet the requirements of the Navigable Waters Protection Act. Beyond the Unuk River, the route traverses a short section of low-lying wet and swampy areas and then starts to climb steeply through a series of switchbacks into the Sulphurets Valley and canyon. The alignment extends to the HDS WTP where McElhanney’s road design (and Special Use Permit [SUP] boundary) ends. Beyond this point, the road design is determined by the mine development, and is the responsibility of MMTS.
Treaty Creek Access Road (HWY 37 to KM 17.9)
The TCAR will leave Highway 37 approximately 19 km south of Bell II, and head west. It will be constructed as a two lane (8 m surface) all-season road to the junction of the Treaty Creek and North Treaty Upper road at km 17.9.
Meetings were held between McElhanney, Seabridge, and the provincial Ministry of Transportation and Infrastructure (MOTI) to discuss and establish a set of design criteria for the proposed intersection at the Highway 37/TCAR location. Functional design work has been completed based on the criteria.
Seabridge Gold Inc. | 18-59 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Initially, the TCAR will follow a former forestry access road. A three-span 119 m long bridge is proposed for the crossing of the Bell-Irving River. This is a major river and will need to meet the requirements of the Navigable Waters Protection Act. The proposed road follows the north side of the Treaty Creek Valley. It will generally be located between the flatter riparian zone below and the steeper avalanche-prone terrain on the north slope. The TCAR will continue as a double-lane road further west to a future intersection with NTAR. Heading west from there, the TCAR will transition into a single-lane road leading to the MTT saddle area.
Treaty Creek Access Road (KM 17.9 To Tunnel Saddle Access Portal)
Beyond km 17.9 road intersection and heading west up the Treaty Creek Valley, the TCAR will provide construction period access.
North Treaty Creek Access Roads
There are currently three permanent access road alignments proposed within the North Treaty/Teigen Creek valley. They shall be referred to as the lower NTAR, the upper NTAR, and the Cut-off Ditch Access Road.
Lower NTAR
Earlier access can be obtained by constructing the lower NTAR. This will leave the TCAR at approximately km 16.9 and follow the lower valley. The lower NTAR will be quicker to build. It will result in a slightly shorter haul distance between Highway 37 and the Treaty OPC and TMF, and with generally flatter grades. This road would be used for approximately the first half of the mine life, until such time as it is necessary to construct the southeast tailings dam. The primary purpose of the NTAR is to provide early access to the lower valley for the construction of the tailings dam(s). Eventually, the north section of this road would be buried by the southeast tailings dam.
Upper NTAR
The upper NTAR will leave the TCAR at approximately km 17.9. It will traverse approximately 12 km north from the TCAR to the Treaty OPC and TMF. The road would then parallel the proposed drainage cut-off ditch, which will divert drainage off the west slope of the valley, north to the Teigen Creek Valley.
Cut-off Ditch Access Road
The proposed cut-off ditch access road is to provide construction and maintenance access only. The power transmission line to the process plant will follow this route.
Seabridge Gold Inc. | 18-60 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
North Treaty/Teigen TMF Service Roads
Access to the Tailings Management Facility will be provided by approximately 28.4 km of 6 m wide service roads (with pullouts). These roads will provide access to the east side of the North Treaty and Teigen Creek valleys, including a water well. The TMF service roads include the following segments:
● | South Teigen Road 11 (5.5 km) |
● | South Teigen Road 11a (3.15 km) |
● | South Teigen Road 12 (9.1 km) |
● | South Teigen Road 12a (0.3 km) |
● | Upper Dam Road 12b (1.2 km) |
● | South Teigen Road 15 (3.7 km) |
● | South Teigen Road 15a (2.7 km) |
● | Water Well Access Road (2.7 km). |
18.12.2 | Winter Access Road |
A Winter Access Road is proposed from a laydown area near the former Granduc Mine to the KSM Site. The approximate alignment for the proposed Winter Access Road is depicted in Figure 18.20. An evaluation of the route was completed by Tetra Tech (Tetra Tech, 2012).
The suggested route will be approximately 38.4 km long. It appears that as much as 32.8 km of the road will be constructed on the glaciers. Although the topographic data is not very precise, the bulk of the route appears to have grades of 4% to 6%. Steeper grades upwards of 30% exist at the toe of the Berendon Glacier and on the small side glacier that allows access onto the Frank Mackie Glacier from the Berendon Glacier. There are also steep sections with grades of up to 15% near the crest of the Frank Mackie Glacier. The total vertical variation is roughly 1,020 m (3,350 ft) between the Granduc Mine area and the crest of the Frank Mackie Glacier.
Seabridge Gold Inc. | 18-61 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 18.20 Proposed Winter Glacier Access Route
Seabridge Gold Inc. | 18-62 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
18.12.3 | Road Design Requirements |
The KSM Site access roads are classified as resource development roads.
The Eskay Creek Mine Road and CCAR will be maintained for the life of the mine to support the mine development, transport of oversize loads, and to provide alternate emergency access. However, these roads will only be used seasonally, and not used during winter months.
The CCAR will be a single-lane (6 m surface) radio-assisted road with turnouts and widenings to allow the largest vehicles and loads access to the Mine Site. The CCAR would have some sections with sustained maximum grades of 12%. Design speeds vary greatly, in large part controlled by the terrain.
The proposed TCAR to km 17.9, and the connecting upper and lower NTARs, will be required for permanent access to the Treaty OPC and TMF, and to the Mine Site via the MTT tunnels. These will be two-lane roads (8 m finished surface), capable of carrying highway legal axle loading year-round. The roads will provide access for supplies, equipment, and crew transport, and be used for hauling concentrate to Highway 37.
Alignment controls such as maximum 10% sustained grades (11% short pitch), and minimum 100+ m radius horizontal curves are utilized for the higher-traffic volumes anticipated on this route. Appropriate vertical profile crest and sag curve “K” values are applied. Except for a few control sections, the nominal minimum design speeds for these sections of road is 50 km/h, and maximum 60 km/h where feasible.
All bridges will be designed to BC Forest Service L100 loading (90,680 kg gross vehicle weight [GVW]) and minimum 1.5 m clearance above the estimated 100-year flood level (Q100). Select structures must meet additional requirements, as prescribed by the Navigable Waters Act. All bridges, including those on the TCAR, will be single lane.
Major culverts have been designed to pass the estimated 100-year flood level (Q100) with no headwater.
18.12.4 | Design Progress |
Early Design Work (Pre-2009)
Utilizing LiDAR survey data acquired in summer 2008 and fall 2011, and the resulting digital elevation models developed, the preferred preliminary access routes identified by Seabridge and McElhanney were prepared. The preliminary road alignments were subsequently located in the field using GPS, and marked with flagging. The objective was to locate and map the most appropriate road alignment for each route based on design standards established by the team. Road alignments and cross sections took into consideration the requirements for both construction and operation phases.
The routes were assessed in the field and adjusted as deemed appropriate. Often several preliminary lines were investigated in order to achieve the preferred road location. Selecting the ultimate road locations was an iterative process involving both field and office design. Based on the preliminary layout, terrain information was gathered, along with bridge and major culvert crossing information. The originally flagged centerline provided a base for follow-up environmental and geotechnical assessments.
Seabridge Gold Inc. | 18-63 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Based on the field reconnaissance, design standards, and associated surveys and preliminary assessments/input by other sub-consultants; preliminary road design plans and profiles, conceptual bridge and stream crossing structure designs, and construction cost estimates were prepared. Engineering assessments were conducted in conjunction with available geotechnical and environmental studies of all proposed routes. The field reconnaissance and bridge site surveys confirmed the accuracy of the LiDAR data.
Design Work (2009-2012)
From 2009 through 2012, consultants BGC and Rescan (now ERM) conducted further geotechnical and environmental assessments, respectively, on the proposed, and altered routes. Where appropriate, McElhanney’s QP (Mr. Bob Parolin) accompanied these consultants in the field to make joint determinations with respect to the most appropriate locations for specific sections of road. McElhanney worked with these consultants to optimize the road locations and designs.
All proposed final road locations were marked with survey flagging. Flagging was marked with survey crew and date information (black felt marker), and locations identified by real-time kinematic (RTK)-GPS survey methods. Select field station references are now indicated on the road plan/profile design drawings for cross reference.
Work included gathering of detailed information to be utilized in refining the design(s), including soils, vegetation, potential borrow/waste areas, drainage culvert requirements, and other relevant information. Stream crossing surveys were completed on “smaller” tributaries. Generally, this includes any stream with an estimated 100-year peak flow of 6.0 m3/s or greater. Details for all such structures were completed to satisfy the requirements of the BC Ministry of Forests, Lands and Natural Resource Operations (MFLNRO) for the SUP applications. Preliminary stream crossing structure designs have been completed for all sites requiring bridges or major culverts.
Design Updates (post-2012)
Additional field work was conducted in 2012 along the proposed access routes by McElhanney, BGC and ERM. New information was incorporated to optimize the road and structure designs. Horizontal and vertical alignments were modified to best meet the environmental, geotechnical and archaeological concerns and requirements. During 2012, work was completed to locate potential borrow and waste sites, at appropriate locations to accommodate road grade construction requirements along the access corridors. Provision was also made to identify areas of potential gravel sources for road construction and surfacing materials.
Log landing locations were identified for decking of timber felled during right-of-way clearing operations. Log landings were located, and spaced, as appropriate for logging/skidding operations. Timber maturities/volumes, etc. were considered in establishing proposed landing locations.
Seabridge Gold Inc. | 18-64 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
The proposed right-of-way (clearing) boundaries now defined on the design drawings are minimum 30 m wide, expanded to include proposed borrow and waste areas, and log landings as described above. The approved SUP boundary limits extend a minimum of 37.5 m either side of proposed road design centerline (total 75 m width), widened as required to incorporate additional areas as otherwise defined. The intention is that this will provide some flexibility in adjusting the design or construction methodology as may be required due to actual field conditions encountered, without requiring multiple amendment to the SUP during the construction period.
The potential for ML/ARD has been assessed for all access road rights-of-way. Additional assessments were conducted in late 2014 for km 0 to 7 of the CCAR which had been flagged by government agencies as an area of special concern.
The SUPs for road construction associated with the site access construction were granted by the Provincial MFLNRO Road Division office on September 27, 2014. There is a requirement to provide a security, payable to MFLNRO, prior to commencing construction.
Access road surveys, designs and drawings were prepared in conformance with standards provided in the then most current version of the BC government Forest Service Engineering Manual (November 29, 2012). Detailed engineering of specific slope stability measures will be subject to review by the geo-technical engineer(s), immediately in advance of, and during construction activities.
Bridge and major culvert structure site plan surveys, designs and general arrangement drawings have been prepared in accordance with MFLNRO Road Division requirements and current industry standards. General arrangement design drawings have been signed and sealed independently by a professional engineer registered to practice in BC. Detailed structure design details will need to be completed in advance of construction.
Seabridge Gold Inc. | 18-65 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
18.13 | Logistics |
The KSM Site is currently accessible by helicopter only. Helicopter support will be used initially to transport equipment, supplies, and personnel prior to completion of the access pioneering roads, and to support winter construction work ongoing as necessary on the Mine Site since CCAR is a seasonal road (closed winters) and MTT would not be operational until the end of the construction duration.
Once surface routes of TCAR, CCAR and the Winter Access Road are established, construction equipment, materials, personnel and consumables will be imported to various work fronts located across the KSM site through these routes and dependence on helicopter support will reduce significantly.
Copper concentrate will be transported from the KSM site by trucks to a deep-water port facility in Stewart, BC, and then loaded onto oceangoing vessels. Two full service ports exist at Stewart, each with roll-on/roll-off freight handling capacity and either are presently, or would by the time operations begin, be capable of concentrate storage and handling to ship loading.
The port is at the head of the Portland Canal, which is a 150 km fjord that is the northernmost ice-free port in North America. The port is accessible via truck on Highway 37A; however, there is no direct rail service. Concentrates from other northern BC mines are currently shipped from this port. In addition, there is interest from other operations in the region for concentrate handling services at the port.
For the purposes of this PFS, Tetra Tech calculated that the copper concentrates will be shipped in bulk, and that the annual output for the initial 10 years will be approximately 350,000 t copper concentrate (dry tonne).
Molybdenum concentrate will be transported in bags from the KSM site via trucks to the port of Prince Rupert. The bags will be transferred from the trucks to containers and then delivered to Fairview Terminal for ultimate loading onto an oceangoing vessel.
It was assumed that the processed molybdenum will be loaded in 1 t bags for transport purposes, and that the annual output will be approximately 1,155 t molybdenum (LOM).
Seabridge Gold Inc. | 18-66 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
18.14 | Preliminary Construction Execution Plan |
The Construction Execution Plan describes how the KSM Mine could be constructed. It is a plan in the preliminary planning stage and briefly defines the construction elements required to successfully execute construction management for KSM.
18.14.1 | Introduction |
The KSM Mine requires six years to construct. The construction scope is intended to meet the following key objectives:
● | deliver an optimized, safe, and environmentally compliant construction in accordance with the systems and procedures in place |
● | perform construction activities safely, striving for zero recordable accidents |
● | the construction is carried out in accordance with the Impact Benefit Agreements (IBA) that are in place with the First and Treaty Nations |
● | ensure that regulations, license agreements, applicable specifications, and standards are met. |
● | complete construction within the agreed schedule, not exceeding the budget, and delivering the full scope as described in the construction authorization. |
18.14.2 | Early Works Plan |
An Early Works Plan will be developed to ensure certain key infrastructure (e.g., construction camps) and support services (e.g., catering) are in place early during construction and functioning efficiently for a successful construction program.
The following planning and field construction focus areas must be addressed in the Early Works Plan:
Planning
● | permit review and renewal plan |
● | construction procedures |
● | staffing, recruiting and labour relations plan, including commitments in accordance with the IBAs that are in place with the First and Treaty Nations |
● | contracting strategy and plan, including commitments in accordance with the IBAs that are in place with the First and Treaty Nations – vetted and approved by the Owner |
● | site access plan – pioneer roads, bridges, followed by completed permanent roads |
● | health, safety and security (HS&S) management plan and manual |
● | site and camp rules and regulations plan |
● | environmental and cultural sensitivity awareness training plan |
● | health and hygiene program |
● | site safety and security orientation program |
● | geohazards and avalanche monitoring response plan |
● | logistics supply and materials management plan for early material requirements, including helicopter support |
● | employee transportation plan for early construction program; air and ground planning required |
Seabridge Gold Inc. | 18-67 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
● | environmental management plan to manage sediment control, waste, spills, fueling, etc. and wildlife management plan for early construction activities |
● | community relations plan |
● | quality management system |
● | safety and emergency response plans including content related to medical facilities and medical attention, emergency medevac, etc. Final Level IV resource loaded construction schedule |
● | Final development execution plan |
Field Construction
● | establish explosive supply storage and controls |
● | identifying and proving borrow pits |
● | sourcing road materials and aggregates; setting up crushing and screening facilities |
● | build pioneering roads along CCAR and TCAR alignments to establish road access to the Mine Site and Treaty OPC |
● | establish aggregate plant, aggregate wash plant, batch plant installation and supply of cement and aggregates |
● | install asphalt plant and supply of asphalt |
● | develop fuel supply and storage locations on site immediately upon achievement of road access build construction camps |
● | establish temporary construction power – standalone power supply systems (gensets) in containers with fuel systems; build TWTP ponds and muck pads, and install TWTP's where tunnelling is on the critical path (e.g., MTT) |
18.14.3 | Construction Scope |
The construction scope outlined in this section, summarizes the main infrastructure items constructed as permanent facilities or activities required to support permanent constructions within and surrounding the Mine Site, Mitchell OPC, MTT and PTMA:
● | Mine Site: |
- | Frank Mackie Glacier Road (Winter Access Road) |
- | upgrades to the existing Eskay Creek Mine Access Road |
- | CCAR (35 km, permanent access road) |
- | Mitchell OPC (primary crushing at a peak of 10,000 t/h) |
- | WSF (WSD crest built to elevation 716 masl) and ancillary facilities |
- | HDS WTP with five large clarifiers and sludge storage to initially process up to 5.4 m3/s |
- | six TWTPs and associated muck piles and treatment ponds |
- | surface water diversion tunnels (MDT, MTDT and MVDT) |
Seabridge Gold Inc. | 18-68 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
- | power distribution comprising construction gensets, overhead transmission lines, power distribution, and substation |
- | logging, site clearing and grubbing (overburden, soils stockpiles and large woody debris for future reclamation purposes); rough/finish grading; structural excavations and fills; foundations; steel erection; architectural, mechanical, electrical and instrumentation works |
- | Mine Site ancillary buildings and infrastructure such as camps (permanent and temporary), fuel storage yard, sludge storage building, diversion ditches and bypass pipelines, material handling, temporary truck assembly yard, energy recovery plants |
● | MTT: |
- | two 22.7 km long tunnels plus ancillary excavations |
- | train system for ore transport at a peak of 10,000 t/h |
- | two 15,000 t ore bins and associated transfer conveyor from the Mitchell OPC |
- | power distribution infrastructure |
- | train maintenance building |
- | train loading/unloading facilities |
● | PTMA and Saddle Area: |
- | TCAR (33 km, permanent access road) |
- | TMF (North Dam built to 930 masl, and Splitter and Saddle dams built to 935 masl, with a fully lined and drained basin for placement of CIL tailing) |
- | COS and transfer conveyors |
- | process plant built for 130,000 t/d average throughput, including concentrate storage and load out |
- | two TWTPs and associated muck piles and treatment ponds |
- | power distribution comprising construction gensets, overhead transmission lines, power distribution, and substations |
- | logging; site clearing and grubbing (overburden, soils stockpiles and large woody debris for future reclamation purposes); rough/finish grading; structural excavations and fills; foundations; steel erection; architectural, mechanical, electrical, and instrumentation works |
- | PTMA ancillary buildings and infrastructure such as camps (permanent and temporary), cold storage, fuel storage yard, diversion ditches and pipelines, and material handling |
● | Infrastructure (major, both on- and off-site): |
- | concentrate storage and loading at the Port of Stewart |
- | switching station at TCAR turn off from Highway 37(by BC Hydro) |
- | 287 kV overhead power line from switching station to PTMA |
- | fibre optics along power line right-of-way and tie-ins |
- | Highway 37 marshalling yard and Highway 37 turnoff, including site security infrastructure. |
Seabridge Gold Inc. | 18-69 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
18.14.4 | Construction Schedule |
The 2016 PFS construction schedule was compiled in accordance with the AACE® International (AACE®) recommended scheduling guidelines (level of detail is at Level 2), with a Class 4 definition. The construction schedule is estimated to be six years and has been designed to accommodate major seasonal and environmental constraints.
Critical path consists of pioneering roads along the alignments of the principal access arteries to the construction areas (CCAR and TCAR), MTT, and the train system that will connect the Mine Site with the PTMA. Prior to completion of the KSM site access pioneering roads, helicopter support will be utilized to support early construction activities at multiple road construction headings. The strategy is to establish site access pioneer roads as early as possible to reduce heli-support costs exclusively for Mitchell Valley construction activity during winter months. Upon completion of the access roads to full width, major equipment and materials can be transported to site via ground freight.
Major site infrastructure such as the WSF and the TMF could potentially be on the critical path should the MTT tunneling duration be shortened. A preliminary construction schedule has been developed with a start date for the construction program assumed for mid-Year -6. Contractors to begin construction on the CCAR and TCAR construction would assume to mobilize for mid-Year -6.
Mine Site pioneering begins with the development of the site access roads to the major infrastructure pads such as HDS WTP area, WSF, Mitchell OPC, MTT portals, CCAR, batch plant, TWTPs, accommodation complexes and powder storage, initially from where the Frank Mackie Glacier Road ends. Early works material and equipment will mobilize on this Winter Access Road and the major equipment, general construction materials, and heavy earth moving equipment will mobilize via the CCAR. The Treaty OPC will utilize the TCAR to transport all material and equipment for PTMA construction.
The construction duration is estimated at 66 months. The high-level schedule is shown in Figure 18.21.
Seabridge Gold Inc. | 18-70 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 18.21 Construction Schedule Summary (Level 1)
Source: Tetra Tech
18.14.5 | Engineering and Procurement |
Engineering and procurement activity will be managed by teams of professionals who will report up through the EPCM contractor's directorate. The Engineering Team will provide the required drawings, specifications, and documents to the Procurement Team in order to purchase all equipment and materials for the construction, and to allow field construction of the scope to the design intent. The EPCM contractor’s scope will include process facility and infrastructure engineering, including managing specialty contractors for major dam and tunnel designs. Mine designs will be developed and delivered by the Owner's Team.
The Procurement Team will receive the engineering documentation and obtain multiple quotations that meet engineering specifications and provide a purchase recommendation to EPCM director. After EPCM director approval, the Procurement Team will purchase equipment and materials and arrange all logistics to deliver the items to the construction site ready for installation. The Procurement Team will also be responsible for establishing service contracts for engineering and field construction services.
Both the Engineering and Procurement teams will be including commitments in accordance with the IBAs that are in place with the First and Treaty Nations.
Seabridge Gold Inc. | 18-71 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
18.14.6 | Construction Management |
The Construction Management Team will be responsible for the management of all activities related to the construction management scope that includes all construction activity in the mine, process, and infrastructure areas (on site and off site). Mining activity, environmental monitoring and reporting and community affairs, which will be the accountability of the Owner's Team.
The Construction Management Team will oversee the installation of all materials and equipment according to engineering and manufacturers specifications and build the facilities to satisfy the design intent and be fully operable. The Construction Management Team is also accountable for construction activity and the construction site until hand over to the Owner following dry commissioning.
18.14.7 | Construction Supervision and Contractor Management |
The objective of all site construction activities is the timely and cost-effective completion of the construction facilities in a safe manner to the design intent and required standards in accordance with schedule. Construction supervision staff, while ensuring that standards are maintained, will provide all oversight management to contractors in achieving this objective.
The Contracts Management Group, which falls under the responsibilities of the site procurement manager, will use an integrated data management system to track contractor invoicing, changes, and requests for information (RFIs). The EPCM contractor will develop a comprehensive set of procedures, in conjunction with and approved by the Owner. These procedures will outline the requirements for the execution of the administrative activities.
18.14.8 | Contracting Packaging and Strategy Overview |
The preliminary construction strategy includes dividing the construction into contract packages including commitments in accordance with the IBAs that are in place with the First and Treaty Nations. During the contractor expression of interest and pre-qualifications phase and during the advancement of detailed engineering, the contract packages will be combined to reduce the total number of contracts and form a final contracting strategy for the construction.
Seabridge Gold Inc. | 18-72 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
18.14.9 | Site Organization Structure |
The EPCM site organization structure has been developed to provide a balanced combination of senior managers, area managers, engineers, superintendents, and discipline specialists, to provide the Owner and contractors continuous support during the installation period. A high-level organizational chart is provided in Figure 18.22.
Figure 18.22 EPCM Organizational Chart
Source: Tetra Tech
The site organization and staffing plan has been designed by work type (e.g., engineering vs. cost controls) with the geographical constraints of a large construction site incorporated.
Each of the two major construction sites will have a dedicated health and safety manager and multiple health and safety representatives to assist contractors with the daily issues and training requirements.
18.14.10 | Environmental and Community Affairs |
Environmental and community affairs during construction will be managed exclusively by the Owner's Team to maintain independency from the EPCM Team. Environmental knowledge and community relationships have been developed through historical activity at the construction site and these relationships must continue to be managed appropriately in the context of regulatory permits granted and the societal expectations that have been expressed to the Owner’s Team. These activities will continue to be of paramount importance to the Owner well beyond the construction period, thus are best addressed by the mine owning entity that will have presence throughout the mine life.
The cultural awareness training program will identify and provide an overview of the various Indigenous groups who have an interest in the development, focusing on their rights as it pertains to their traditional use of the natural resources of the area. Contractual obligations negotiated between the Owner and the various groups as components of Benefit Agreements will also be reviewed at a very high level.
Seabridge Gold Inc. | 18-73 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
18.14.11 | Pre-commissioning/Commissioning |
The commissioning period starts in any specific work area after all materials and equipment have been installed to design specification and the EPCM contractor certifies installation complete and hands the area over to the commissioning team. For the purposes of this PFS update, commissioning starts after equipment or material installation for a system or work area is complete and ends when ore starts to be processed to yield a revenue stream (i.e. the battery limit between Year -1 and Year 1). In this PFS the EPCM contractor's scope includes commissioning through dry commissioning when work areas are handed over to the Owner's commissioning team. The Owner's commissioning team executes wet and process commissioning with select operating staff and professionals that are separate in reporting line and accountability from the operations staff. When these phases of commissioning are complete, they will be handed over to Owner's operations staff who will operate the facilities through ramp up in Year 1 and on to normal operation.
18.15 | Owner’s Implementation Plan |
The KSM Mine will be constructed as outlined in Section 18.14 and in the time frames indicated in the construction schedule in Section 18.14.4. It is the Owner's responsibility to attain, and renew when necessary, all environmental and operating permits allowing site access road development, mine construction, and all mine operations for KSM.
This Owner's implementation plan described herein attempts to provide a preliminary outline to the key responsibilities and actions the Owner's Team will take, including interaction with EPCM contractors during the construction stage and commitments in accordance with the IBAs that are in place with the First and Treaty Nations. It is assumed KSM will be developed as a joint venture (JV) or consortium of two or more companies that will form a partnership to build and operate the KSM Mine. A JV organization would allow KSM's partners to reduce risk and spread capital expense. The “Owner” referenced in this section is synonymous with this JV organization. It is further assumed that the structure developed will assign decision making authority to the majority stakeholder to eliminate bureaucracy and streamline development and mine production decisions. The KSM Mine will therefore have its own operating structure and reporting line through the JV partnership, maintaining its own profit and loss accountability to the JV partners. The Owner's organizational structure will have a KSM president with multiple reporting lines through a six-layer organization. Site based reporting lines to the president comprise construction, mine, and process with on-site administrative functional support as necessary to enable the Owner’s Team’s success. Additionally, off-site business and external relations functions would also report to the KSM president.
A central office in Vancouver is not anticipated. Instead, satellite offices will be located in Terrace, Smithers and Stewart, BC to facilitate support functions sufficiently close to the construction site to provide effective support. The implementation plan described in this section highlights some key tasks required for execution by the Owner's Team over the course of construction. There are two initial critical tasks for the Owner's Team, starting with the identification and hiring of the KSM president, who will initially select a team, who in turn will do the same for their respective teams. This process is expected to be repeated throughout the course of construction until the entire enterprise organization has been built, while directing and supporting construction in various roles.
Seabridge Gold Inc. | 18-74 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
The second initial critical Owner's Team task is the engagement of an EPCM contractor early in the development schedule to drive the majority of the scope that resides outside of the Owner's direct responsibility. The type of contractual arrangement between the Owner and EPCM contractor has not been established, as it relies on the strategy that will be developed after forming the JV and may be influenced heavily by the operating style of the JV partners.
The Owner will manage any early engineering work required to prepare design documents that support permit applications or renewals and compliance reports for permits issued by the Province of British Columbia and the Government of Canada. Site road access permits, construction camps approvals, and limited site development permits have been obtained. Additional permits will be required by the KSM Mine to ensure the completion of construction and the initiation of long term operations. During construction, the Owner will be responsible for:
● | mine development/construction including pre-stripping |
● | supervision of mine fleet assembly |
● | all environmental baseline monitoring, permitting and compliance |
● | operation of temporary water treatment and sewage treatment plants |
● | community and governmental relations |
● | Treaty and First Nation relations |
● | competitively bidding, adjudication and award of EPCM |
● | Owner's Team recruitment |
● | training of operating personnel for the Mitchell pre-mining phases |
● | medical support |
● | verification surveying for measurement and payment |
● | on boarding all G&A staff for both on-site and off-site positions in advance of commissioning to assist as part of the Commissioning Team and to develop process and procedures for each department/function to efficiently support operations |
● | all personnel required for ultimate mine and plant start-up and operations. |
Seabridge Gold Inc. | 18-75 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
The Owner will recruit and train technical operations and administrative staff to work in the following locations:
● | Treaty OPC Operations and Water Management – process plant and train operations, maintenance, TMF operations, security, and administrative personnel |
● | Mine Site and Water Management – operations, maintenance, security and warehousing personnel |
● | Smithers Office – proposed to be developed to service all of KSM's needs for external relations comprising governmental affairs, environmental management, permitting and compliance, public and community relations and communications, First Nations and Treaty Nation relations |
● | Terrace Office – proposed as a business centre where home office support will be based for these administrative functions: supply chain and logistics, human resources, IT, accounting functions, tax, business analysis, legal and audit. Health, safety and loss prevention may have occasional presence in this office, but will be primarily based on site to support ongoing operations as they develop |
● | Stewart Port Site – management of deliveries and security for incoming construction equipment/materials and outgoing concentrate shipments. |
A conceptual onboarding plan for specific G&A functions will be developed prior to turnover of constructed areas of the site from EPCM to the Owner's Team and is programmed to be well in advance of the turnover. This will allow sufficient time for the development of internal KSM Mine processes and procedures as a means to facilitate a smooth mine start up. The early onboarding plan is intended to cover gaps in service areas that may not have been detected in this early stage of design.
The time sequences for key Owner activities by year are outlined in Table 18.9. Note that this task list assumes that a FS has been completed or is running concurrently with the construction start and that either full or conditional/partial construction funding will be granted by the Owner ahead of the construction start.
Seabridge Gold Inc. | 18-76 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Table 18.9 Owner's Key Activities by Year
Seabridge Gold Inc. | 18-77 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Seabridge Gold Inc. | 18-78 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
19.0 | Market Studies and Contracts |
Seabridge engaged Neil Sheldon and Associates Ltd. (NSA) to provide opinion reports on marketing inputs for the 2016 PFS and review the 2019 copper-gold concentrate market and related concentrate treatment charges, excluding off-site transportation costs. The information and options in this section come from the opinion reports. No smelter contracts are currently in place or being negotiated. All currency amounts used in this section are in US dollars, unless otherwise specified.
19.1 | Copper Concentrate |
19.1.1 | Marketability |
When considering the marketability of copper concentrates, quality and quantity are determining factors. There is considerable variation in the quality of concentrates and the requirements of various smelters do vary; such variation relates to the technical abilities of the smelter and its overall concentrate feed and blend.
Ideally, smelters prefer to blend their feed with approximately 30% copper and similar amounts of iron and sulphur. In the last several years, however, the grade of some of the major high-grade suppliers has been dropping. At the same time, many new suppliers tend to blend copper-gold concentrates with copper content in the low to mid 20% range. Consequently, the market has seen the blend for most smelters drop to a copper level of 27 to 28%. Apart from the level of copper, iron, and sulphur, other key elements in determining concentrate salability include the levels of gold and silver content, as well as any impurities.
Based on the impurity levels projected by Tetra Tech (using the test results completed to date – see Table 17.3), concentrates are relatively clean. Depending on the market situation at the time of contract negotiations, penalties will likely be minimal, if at all applicable. Some smelters, such as in Japan, South Korea, and Europe, are expected to have more interest in copper concentrates with high gold content.
19.1.2 | Smelting Terms |
Copper Concentrate Smelting Market
Copper concentrates account for approximately four-fifths of total newly-mined copper production, with the balance of output coming from solvent extraction and electrowinning copper cathode and other copper-bearing by-products.
Concentrate supply started to increase over 2013 and is expected to continue to increase towards the end of this decade as a result of new developments and announced expansions of operating mines.
Seabridge Gold Inc. | 19-1 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
A significant portion of copper concentrate is processed by integrated smelters—captive plants that are vertically integrated with mines through ownership. However, an increasing annual volume of global copper concentrate is treated by custom smelters that generally are not integrated, although there is, in many cases, investment ownership in mines. Custom smelters have increased their overall smelting market share from 30% in 1980 to approximately 50% recently.
Over the last two decades there has been a significant expansion of smelting and refining capacity, particularly in India and China. The Chinese smelting industry has increased imports, as limited domestic mine capacity could not meet demand. This trend has been a key determinant in world concentrate supply/demand balances.
The copper concentrate market has seen significant structural imbalances in the recent years between mine production and smelting capacities. Recently there have been significant increases in smelter treatment charges and refining charges (TCs/RCs). The balance of supply and demand for concentrates is set by the whole of the concentrate output of the mining industry and by the availability of capacity across the smelting industry. The availability of custom concentrates, relative to smelting capacity, should, in theory, be the ultimate determinant of terms for custom treatment of concentrates.
19.1.3 | Copper Concentrates Contracts and Terms |
The concentrate market is basically split into two types of contracts. First, there are long-term off-take contracts between mines and smelters that reflect, in general, the annual concentrate supply and demand balance. Second, there is spot or short-term business primarily between mines and traders and, on a much smaller scale, between mines and smelters. By its nature, such business is much more volatile and there is considerable variation in spot TCs/RCs, not only annually, but over each year.
Current and Future Terms
NSA suggests that annual benchmark numbers are beginning to reflect a move towards sustainable long-term numbers. NSA believes that the most likely scenario is that ultimately charges have to move up towards a level that is economical for the smelting industry over the long term. The benchmark numbers for the last several years at the time of the marketing study are shown in Table 19.1
Table 19.1 Benchmark Smelting Terms
2016 | 2015 | 2014 | 2013 | 2012 | |
Copper Treatment Charges ($/dmt) | 97.500 | 107.000 | 92.000 | 70.000 | 63.500 |
Copper Refining Charges ($/lb) | 0.0975 | 0.1070 | 0.0920 | 0.0700 | 0.0635 |
For comparison, the spot market of April 2016 indicates sales into the Chinese market where the levels of TCs/RCs were between $90/dmt and $95/dmt of concentrate and $0.090/lb and $0.095/lb of copper, respectively.
Seabridge Gold Inc. | 19-2 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Over approximately 20 years (up to 2005), historical TCs/RCs averaged approximately $77/dmt and $0.077/lb (including approximately $0.01 of participation for these purposes, split between the treatment charge and the copper refining charge) at an average price of $0.93/lb of refined copper.
The general view of NSA was to not expect price participation materializing in the near future; however, it should not be ignored. Historically, when price participation first became a factor in concentrate negotiations it was only applicable at a price level higher than the price existing at the time of negotiation.
NSA suggests that the annual benchmark terms realized at the time of the study are likely to be a guide to future levels. With this in mind, and for purposes of 2016 PFS, the assumption should be a copper treatment charge of $100/dmt, with copper refining charges of $0.10/lb of copper.
TCs/RCs are not the only terms that are used in valuing copper concentrates. Payments and deductions are a matter of negotiation and will vary with many factors, including supply and demand, and custom individual markets.
The following terms are an indication of “standard” long-term smelter charges, including suggested TC/RC terms. Delivery is on the basis of Cost, Insurance and Freight – Free Out (CIF-FO) smelter ports (the mine pays all costs up to delivery port and the buyer arranges and pays for cargo discharge).
Payable Metals
Copper | Pay 96.5% with a minimum deduction of 1 unit (amount deducted has to equate to a minimum of 1% of the agreed concentrate copper assay). | |
Silver | If over 30 g/dmt pay 90%. | |
Gold | A scale is applicable with some variations of the following: |
● | less than 1 g/dmt, no payment |
● | 1 to 3 g/dmt, pay 90% |
● | 3 to 5 g/dmt, pay 93% |
● | 5 to 7 g/dmt, pay 95% |
● | 7 to 10 g/dmt, pay 96.5% |
● | 10 to 20 g/dmt, pay 97% |
● | over 20 g/dmt pay 97.5% |
● | over 30 g/dmt pay 97.75%. |
Gold and silver payments may vary between smelter locations. In China, high gold in copper concentrates is not generally desired; relating more to internal pricing issues rather than technical concerns. Technically, the more modern smelting facilities are able to accept payment formulas similar to Japan and South Korea, but for many of the older smelters in North China, this is not the case. In Europe, with grades of over 40 g/dmt of gold content, payment of 97.75% with a minimum deduction of 1 g/dmt is likely to apply.
Seabridge Gold Inc. | 19-3 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Refining Charges
Copper | $0.10/lb payable copper | |
Gold | $6.00 to $8.00/oz payable gold | |
Silver | $0.50/oz payable silver |
Treatment Charges
Treatment Charge | $100.00/dmt CIF-FO main smelter port. |
Price Participation
Not applicable at present.
Penalties
Arsenic: | $2.50 to $3.00 per 0.1% over 0.1% up to 0.5% arsenic | |
Antimony: | $3.00 to $4.00 per 0.1% over 0.1% antimony | |
Lead: | $2.00 to $3.00 per 1% over 0.5% to 1.0% lead | |
Zinc: | $2.00 to $3.00 per 1% over 2% to 3% zinc | |
Mercury: | $2.00 per each 10 ppm over 10 ppm mercury | |
Bismuth: | $3.00 to $5.00 per 0.01% over 0.03 to 0.05% bismuth | |
Selenium: | $3.00 to $5.00 per 0.01% over 0.05% selenium | |
Tellurium: | $4.00 to $5.00 per 0.01% over 0.02% to 0.03% tellurium | |
Fluorine | $1.00 to $2.00 per 100 ppm over 300 ppm fluorine | |
Chlorine | $1.00 to $3.00 per 100 ppm over 300 ppm chlorine. |
Furthermore, penalties may also vary from smelter to smelter. It should be noted that for the elements where a percentage range is used, this relates to ranges of penalty thresholds that are negotiated. The penalties noted in this section are generally in line with levels applicable over recent years, but there is a tendency towards higher levels.
Based on the anticipated impurity levels derived from the test results by Tetra Tech (as presented in Table 17.3), the concentrates from the KSM concentrate production are relatively clean, and depending on the market situation at the time of contract negotiations, penalties will likely be minimal if at all applicable. As most of the mill feeds will be the blended materials from different deposits and spatial locations, the blend should effectively mitigate penalty elements rising for the ore from some limited locations.
Seabridge Gold Inc. | 19-4 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Other Off-site Costs
Various indirect costs other than smelter charges include:
● | Losses; assumed to be 0.1% or less, due to improvements in material handling. |
● | Insurance; marine insurance is assumed to be in the range of 0.1 to 0.15% of net invoice value of the concentrate. |
● | Supervision, assaying and umpire costs; the costs for third-party supervision and assaying are assumed to be approximately US$1/dmt. |
● | Marketing; the cost of marketing varies with concentrate tonnage, location, and number of smelters to be shipped. For 2016 PFS, the estimated marketing cost is in the range of US$5 to US$10/dmt. |
● | Concentrate transportation; the transportation costs for copper concentrate are based on the following assumptions by Tetra Tech: |
- | trucking: US$38/wmt |
- | port storage and handling: US$14/wmt |
- | ocean transport to Asian port: US$26/wmt. |
19.2 | Molybdenite Concentrate |
19.2.1 | Smelting Charge |
Molybdenum concentrates of either primary production origin, or as a co-product, need to be further processed. This is initially to produce molybdenum oxide by roasting, or by use of autoclaves for upgrading. Quality is an important consideration and certain elements can be deleterious. As a rule of thumb, 50% molybdenum content is considered the minimum. Below that, buyers will begin to be a bit selective and charges will rise somewhat. One guideline, given for each 1% below 50%, would be an increase in charges of $0.05/lb of molybdenum.
Currently, the deduction for roasting is very quality dependent, with high copper content concentrates generally selling at a 10 to 15% discount. Assuming that the copper content of its molybdenum concentrates is reduced to 0.45% or less, the lower end of the range will apply to clean high-grade concentrates. In the years (2005 to 2009), discounts for high-copper molybdenum concentrates have reached 25%.
In summary, it is recommended to use a discount of 12% from the price, with a minimum of $1.00/lb and a maximum of $2.50/lb. This discount would be inclusive of all charges mine to market, such as delivery costs, irrespective of whether or not the concentrate is sold to a trader or a roaster directly.
Seabridge Gold Inc. | 19-5 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
On average, the molybdenum concentrate could contain approximately 1,000 to 2,000 ppm rhenium or higher. Given the high rhenium content, some roasters would recognize the rhenium content in the form of lower treatment charge or some payments. However, it is difficult to project the rhenium value at the current market and the level of study. This potential for additional value in the rhenium content represents a future opportunity.
19.3 | Gold and Silver Doré |
There are no gold and silver doré marketing studies conducted for this PFS. No smelter contracts are currently in place or being negotiated. The terms used for this study are based on the typical terms currently used in the markets. All currency amounts used in this section are in US dollars, unless otherwise specified. The general payment terms for gold and silver doré are assumed as below:
● | Gold: pay 99.8% of content less a refining charge of US$1.00/accountable oz. Doré transportation is assumed to be US$1.00/oz. |
● | Silver: pay 90.0% of content less a refining charge of US$1.00/accountable oz. Doré transportation is assumed to be US$ 1.00/oz. |
Insurance and assay costing is assumed to be in the range of 0.10 to 0.15% of net invoice value of the doré.
Seabridge Gold Inc. | 19-6 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
20.0 | Environmental Studies, Permitting, and Social or Community Impact |
20.1 | Licensing and Permitting |
The KSM mine development plan was subject to the BC Environmental Assessment Act (BCEAA, the Act), the Canadian Environmental Assessment Act- 1992 (CEAA), and Chapter 10 of the Nisga’a Final Agreement (NFA).
As of January 2020, mine development plans for the KSM property have successfully gone through the provincial and federal environmental assessment review processes, and the appropriate certificates/approvals have been obtained. Additionally, permits for early-stage construction activities, continuation of exploration, and certain permit and project approval renewals have also been obtained. Seabridge continues to advance permitting to allow for the construction of the KSM mine, as well as to continue exploration activities. Details of the provincial, federal, and NFA processes and current statuses, as well as the current permitting status of KSM property, are included in this section.
The KSM property underwent a harmonized EA process with the provincial and federal governments, in accordance with the principles of the Canada-BC Agreement on Environmental Assessment Cooperation (Cooperation Agreement 2004). The process included a working group comprising federal and provincial officials, the Nisga’a Lisims Government (NLG), Aboriginal groups, and local government agencies. Representatives of the US federal and Alaska state agencies were extensively involved in the EA review processes, as a matter of courtesy at the insistence of Seabridge, given that the mineral deposits are located on a tributary of the Unuk River, a transboundary river, 30 km upstream of the US/Canada border. Authorizations are not required from any US federal or state regulatory agency for mining developments on the KSM property to proceed into construction and operation.
The following major permits have been obtained for the KSM area:
● | BC MEMPR Mines Act (1996) Permits MX-1-571 (KSM), MX-1-763 (PTMA), MX-1-965 (DKEA). |
● | Mining Leases 1031440 and 1031441 were issued to Seabridge Gold Inc. on 6 October 2014. |
● | BC Ministry of Forests, Lands, Natural Resource Operations and Rural Development (BC MFLNRORD) Land Act (RSBC 1996c), Licence of Occupation for MTTs Roadway SK904033. Licence of Occupation for Treaty Transmission Line SK908555. |
Seabridge Gold Inc. | 20-1 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
● | BC MFLNRORD, Forest Practices Code of British Columbia Act Special Use Permits for Treaty Creek (S25751) and Coulter Creek Access Roads (S25750). |
● | BC MFLNRORD, Forest Act Occupant Licence to Cut L49546 (Mine Site), L49608 (CCAR), L49658 (PTMA) and L49612 (TCAR). |
● | BC ECCS, Environmental Management Act, Authorization for Effluent Discharge PE106814 (TWTP#6), PE108155 (DKEA), and PE106824 (TWTP#4). |
● | BC ENV, Environmental Management Act, Authorization PA 106826 for air emissions for five KSM camps. |
● | BC ENV, Environmental Management Act, Authorizations PR 106834 (Mine Site) and PR106835 (PTMA) for authorized landfills. |
● | BC ENV, Environmental Management Act, Registration for Municipal Wastewater Regulation Authorization PE 106836 for waste discharge to the environment for Camp 9/10 and PE106837 (Camp 6), PE106839 (Camp 5), EP106809 (Mitchell Operating Camp), PE106841 (Camp 4). |
20.1.1 | Provincial Process |
Under the BC EA process and its regulations, certain categories of larger-scale projects must undergo an EA, and an EA Certificate must be obtained before the KSM mine development can proceed. The scope, procedures, and methods used for each assessment are tailored to the specific circumstances of a proposed project. The EA must assess a project’s potential environmental, economic, social, heritage, and health effects.
Under the BCEAA Reviewable Projects Regulation, the proponent of a new mine facility, with a production capacity of greater than 75,000 t/a of mineral ore, must obtain an EA Certificate. The 2016 PFS will have an annual mill throughput of 43,800,000 t/a, which substantially exceeds this threshold.
Seabridge was accepted into the BC Environmental Review process in March 2008, following submission of a Project Description (Rescan 2013). In July 2013, Seabridge submitted an Application/EIS (Rescan 2013) under the BCEAA (2002) in accordance with the approved project Application Information Requirements (AIR) to the BC Environmental Assessment Office (BCEAO). The Application/EIS was approved and EA Certificate #M14-01 for the KSM property was issued on July 29, 2014 for a period of 5 years.
The full Application/EIS can be found on the BCEAO web site here: http://a100.gov.bc.ca/appsdata/epic/html/deploy/epic_project_doc_list_322_r_app.html
Seabridge Gold Inc. | 20-2 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
In October 2018, under Section 18(2) of the Act, KSM Mining ULC applied to the BCEAO for an extension of the deadline specified in the Certificate. On March 21, 2019, the BCEAO extended the date specified in the Certificate #M14-01 by which Seabridge must have substantially started the mine development from July 29, 2019 to July 29, 2024.
The KSM property is in full compliance with the EA Certificate #M14-01 annual compliance report submissions and conditions of the Certificate.
20.1.2 | Federal Process |
The KSM property was subject to the CEAA (1992) because it may require several statutory authorizations listed in the Law List Regulations. KSM was subject to a comprehensive study level of assessment under the CEAA (1992) because the proposed daily ore mill feed of 130,000 t/d exceeds two thresholds set out in the CEAA (1992) Comprehensive Study List Regulations; specifically, the 4,000 t/d threshold for metal mills, and the 600 t/d production threshold for gold mines. Certain dam structures proposed for KSM also exceed the 10,000,000 m3/a threshold for water diversions.
Development of the KSM property was deemed to require a “comprehensive study” in July 2009 and a “notice of commencement of an environment assessment” was submitted to Seabridge. The terms of the scope of assessment was developed and posted by CEAA for public comment in late May 2010. With the CEAA (2010) amendment, the terms of reference were subsequently re-posted for public comment by the CEA Agency in July 2010. The draft KSM (Kerr-Sulphurets-Mitchell) Project Comprehensive Study Report was subsequently issued by the CEA Agency in July 2014.
The KSM Project Comprehensive Study Report, along with filed public comments from the NLG, other Aboriginal groups, and the public, were considered by the Minister of the Environment when making her final EA decision. KSM received federal approval on December 19, 2014.
Nisga’a Final Agreement (NFA)
The NFA is a treaty signed by Nisga’a Nation, the Government of Canada, and the Government of BC in 1999. The NFA came into effect in May 2000 under the federal Constitution Act and the BC Nisga’a Final Agreement Act, and sets out Nisga’a rights over approximately 27,000 km2 of land in the Nass River system and surrounding drainages.
The NFA establishes three categories of lands with different specified Nisga’a interests-the Nisga’a Lands (approximately 2,000 km2), the Nass Wildlife Area ([NWA], more than 16,000 km2), and the Nass Area (approximately 27,000 km2)—the latter incorporating the Nisga’a Lands and the NWA within it. The NFA affords title to Nisga’a Nation within the Nisga’a Lands and defines the rights of Nisga’a Nation to self-government and law making authority in this area. The NFA also specifies Nisga’a Nation rights to access and make use of natural resources in the NWA and the Nass Area.
Seabridge proposes to develop some components of the 2916 PFS footprint within the Nass Area, including the Treaty OPC, the TMF, and the northern portion of the MTT. No components of the KSM infrastructure will physically occupy any portion of Nisga’a Lands or the NWA, both of which are located south of the potentially affected portion of the Nass Area.
Seabridge Gold Inc. | 20-3 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
The NFA makes explicit provision for Nisga’a participation in federal or provincial EAs of projects sited anywhere within the outer Nass Area boundary. Seabridge was directed by the federal and provincial governments to ensure that it conducted its EA responsibilities for KSM in compliance with all relevant Nisga’a treaty rights, including those dealing with economic, social, cultural, and environmental interests. Chapter 10 of the NFA (Environmental Protection and Assessment), paragraphs 6 to 10, provide for meaningful Nisga’a participation in the EA through effective coordination, timely notice, provisioning of information and studies to Nisga’a Nation, and a clear focus on assessment of potential adverse project effects on residents of Nisga’a Lands, the Nisga’a Lands themselves, or more generally, on Nisga’a interests as set out in the NFA.
The Government of Canada worked collaboratively with the NLG and the Government of BC to facilitate the assessment of paragraphs 8(e) and 8(f) effects as part of the comprehensive study. Seabridge conducted an economic, social, and cultural impact assessment (ESCIA) on the well-being of Nisga’a citizens (i.e., paragraph 8(f) effects) based on a work plan that was required by the joint AIR. Effects defined under paragraph 8(e) were described in the Application/EIS as part of Seabridge’s analysis of the effects KSM mine development will have on environmental valued components (VCs).
The KSM Project Comprehensive Study Report examined both paragraphs 8(e) and 8(f) effects on Nisga’a citizens, lands, and interests and provides the federal perspective on these effects. This information, along with comments received during the final public consultation and any agreements between Seabridge and the NLG concerning the effects of the KSM mine development, were used to inform the Minister of the Environment’s NFA Project Recommendation. KSM received its NFA approval in December 2014 following receipt of the Federal CEAA Approval on December 19, 2014.
20.1.3 | Provincial Permits |
The Application/EIS was accompanied by applications for eligible provincial authorizations in accordance with the BCEAA (2002) Concurrent Approvals Regulation (BC Reg. 371/2002).
This set of initial permits is referred to as the “Batch 1 Permits” and included permits for the following mine components:
● | KSM Project Mines Act and Environmental Management Act Permit Application for Limited Site Construction (May 2013) |
● | Special Use permits for the CCAR and TCAR |
● | KSM Construction Camps |
● | KSM Project Treaty Transmission Line |
● | Land Act tenure for the MTT Roadway. |
Seabridge Gold Inc. | 20-4 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
In November 2015, Seabridge submitted a Mines Act Notice of Work and an Environmental Management Act (2003) permit application to construct the Deep Kerr Exploration Adit (DKEA). Mines Act permit MX-1-965 authorizing construction of DKEA was issued September 20, 2016, and EMA permit PE-108155 was issued on August 24, 2016 authorizing the discharge of mine effluent from the DKEA project to Sulphurets Creek. The DKEA will be located near the existing temporary KSM exploration camp.
As of January 2020, it is estimated that over 100 provincial permits, licences and approvals are still required to fully develop the 2016 PFS.
20.1.4 | Federal Permits |
The Application/EIS included applications for the following federal permits and authorizations:
● | Metal and Diamond Mining Effluent Regulations (MDMER) Schedule 2 Amendment; |
● | International Rivers Improvements Act Licence |
● | Navigable Waters authorization. |
Further details are provided in the following sections.
Fisheries Act (RSC 1985, c F-14) - MDMER Schedule 2 Amendment Application
Section 36(3) of the Fisheries Act (1985) prohibits the deposition of deleterious substances into fish-bearing waterbodies; however, deposition of tailings and/or waste rock into such waterbodies may be exempted from this regulation if they are included in Schedule 2 of the MDMER of the Fisheries Act (1985). In order to permit the construction of the proposed tailings management facility in North Treaty Creek and South Teigen Creek (both fish-bearing streams), an application to amend Schedule 2 of the MDMER was submitted with the Application/EIS along with a fish habitat compensation plan designed to offset the habitat losses associated with the Schedule 2 amendment (see MMER Compensation Plan – Appendix 15Q of the Application/EIS). The waterbodies contained in the proposed KSM tailings impoundment area were gazetted and added to the Schedule 2 amendment list in July 2017.
Other Fisheries Act Permitting
Section 35 of the Fisheries Act include the fish habitat protection provisions, which prohibit the harmful alteration, disruption, or destruction (HADD) of fish habitat. In addition to the Schedule 2 Amendment to permit deposition of tailings into North Treaty and South Teigen Creeks, KSM will require an authorization under Section 35(2) of the Fisheries Act to permit fish habitat losses associated with other KSM infrastructure.
The KSM mine development plan entered the EA process prior to the 2012 changes to the Fisheries Act, which removed the habitat protection provisions (i.e., harmful alteration, disruption or destruction (HADD) of fish habitat), and limited the reach of the legislation to “commercial, recreational, or Aboriginal” fisheries. Despite these changes in 2012, the approach to fish habitat offsetting and permitting at the Property was not altered, and the habitat protection provisions were restored in the 2019 changes to the Fisheries Act. Applications for fisheries authorizations are anticipated to be submitted in early 2020.
Seabridge Gold Inc. | 20-5 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
International River Improvements Act licence
Seabridge submitted an application for a licence under the International River Improvements Act to Environment Canada on February 2015.
The application was prepared in accordance with Sections 6 and 7 of the International River Improvements Regulations (C.R.C., c982). The application is for improvements on the Unuk River, specifically within the Sulphurets Creek Watershed (which is a tributary to the Unuk River).
The licence was issued to Seabridge on October 21, 2016, and the transfer of ownership to KSM Mining ULC completed in 2018. The licenced Improvements include the Water Storage Facility and ancillary water works for 2016 PFS, representing dams, reservoirs and associated water diversion, collection and management structures for the purpose of: diverting fresh (non-contact) water around the mine site to downstream receiving waters and collecting water that has been in contact with disturbed areas from the mine site for control prior to discharge into the receiving waters.
The Licence is valid for 25 years until October 20, 2041.
Navigable Waters Application
Exemptions to the Navigation Protection Act (RSC 1985, c. N-22) were submitted as components of the Application/EIS. Further to a letter received from Transport Canada dated August 1, 2014, Transport Canada subsequently determined that the waterways of the Property were not navigable waters as defined within the Navigation Protection Act, and as a result there was no requirement to obtain an exemption to the prohibition pursuant to Section 24 of the Navigation Protection Act.
20.1.5 | BENEFITS AGREEMENT |
Tahltan Nation
On June 10, 2019 the Tahltan Nation and Seabridge Gold Inc. announced that the parties reached agreement on the terms of a Co-operation and Benefits Agreement in connection with KSM. Tahltan Nation voted 77.8% in favour of the KSM Project Impact Benefits Agreement (IBA). The IBA provides a thorough and co-operative framework for the parties to continue building the social licence of KSM mine development through commitments to economic benefits and environmental management of the land.
Nisga’a Nation
On June 17, 2014, Seabridge Gold entered into a comprehensive Benefits Agreement with the Nisga’a Nation in respect of Seabridge Gold’s KSM Property, located in northwest British Columbia. The Benefits Agreement established a long-term co-operative relationship between Seabridge and the Nisga’a Nation under which the Nisga’a Nation will support the mine development, participate in economic benefits from KSM and provide ongoing advice. The Agreement includes commitments by Seabridge regarding jobs and contracting opportunities at KSM, education and training, financial payments and a framework for working together on ongoing development matters. This comprehensive agreement also addresses concerns expressed by the Nisga’a Nation around the potential environmental and social impacts of KSM development.
Seabridge Gold Inc. | 20-6 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
20.2 | Environmental Settings and Studies |
The Property is located in the coastal mountains of northwestern BC, approximately 950 km northwest of Vancouver, 65 km northwest of Stewart, and 35 km northeast of the BC-Alaska border.
The following sections summarize the valued components of the biophysical and socio-community aspects of KSM that have been studied extensively and reported in the Application/EIS (Rescan 2013) under the BCEAA (2002) in accordance with the approved project Application Information Requirements (AIR) to the BC Environmental Assessment Office (BCEAO).
20.2.1 | Biophysical Setting |
Air Quality
The air quality in the area proposed for KSM development and elsewhere in northwestern BC is predominantly unaffected by anthropogenic sources, reflecting the region’s remoteness and the lack of, and localized nature of, sources of anthropogenic air emissions sources.
Geology and Geochemistry
The mineralized zones in the local area and more regionally, tend to be sulphide-rich. Where sulphide minerals such as pyrite are present, oxidation can create acid rock drainage (ARD), unless sufficient quantities of neutralizing minerals are available. In the event that acidic drainage is formed, low pH conditions can lead to higher rates of metal leaching (ML). Baseline surface water and groundwater quality in the vicinity of mineralized zones in the region exhibit relatively low pH and significant metal concentrations, reflecting the presence of sulphide minerals and the natural occurrence of ML/ARD processes.
Physiography
The KSM topography is very rugged. Glaciers are common in high elevations. Most steep slopes consist of exposed bedrock and accumulations of rubbly colluvium. Gentler slopes have a thin mantle of morainal material (glacial till). Thick glacial deposits are generally restricted to the margins of major valley floors and adjacent lower slopes. Avalanches and slope failures are common features at high and intermediate elevations (above 1,500 masl).
Seabridge Gold Inc. | 20-7 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Geohazards
Locally and regionally, geohazards are linked primarily to landslides and snow avalanches. Landslide hazards are abundant throughout the region. They are attributed to several factors, including the presence of unstable surficial soils and weak bedrock, repeated geologically recent glaciations, resulting in over-steepened valley sidewalls, the loss of slope buttress support following glacial recession, abundance of veneers that are shallow to bedrock, and the high precipitation environment.
Unstable lateral morainal till has been deposited on slopes at angles that exceed the angle of repose, resulting in rubbly colluvium accumulating along moderate steep slopes and valley bottoms. The unloading of the valley walls following glacial retreat has led to pressure release cracks and associated local instability on over-steepened slopes resulting in geohazards, such as rock fall, debris avalanches, and slumping of surficial materials. These geohazard processes are endemic to the local area.
Snow avalanche hazards are abundant due to high elevation, substantial snow supply and generally steeper slope gradients, and tend to be associated with terrain that is open and steep.
Hydrology/Surface Water Quantity
Regional and local surface water quantity characteristics were determined from data collected from specially installed hydrometric stations, used in conjunction with a regional analysis prepared for long-term hydrometric data from Water Survey of Canada hydrometric stations.
The monthly distribution of flow tends to be concentrated in the open water season (May to October), with less than 20% of the annual flow occurring from November to April at a majority of the regional stations.
Groundwater Quantity
Groundwater conditions correspond with the mountainous, wet environment that comprises the mine site and the PTMA. Groundwater gradients are high, driven by heavy rainfall and recharge at higher elevations in the mountains. Valley bottoms are discharge zones, with groundwater levels near or above (artesian) ground surface. Discharge zones also exist along valley walls in the mine site, where seeps of acidic water have been observed (with pH readings as low as 2.5).
Surface Water Quality
The hydrological regime affects water quality in two ways:
● | increased flows during freshet, glacial melt, and heavy rainfall events dilutes concentrations of major ions and total dissolved solids |
● | increased sediment load and transport during high-flow periods leads to increased concentrations of TSS and particle-associated metals. |
Seabridge Gold Inc. | 20-8 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Streams near the mine site and PTMA have distinct surface water quality. Metal leaching due to naturally occurring ARD is associated with total and dissolved metal concentrations in Mitchell and Sulphurets creeks that are frequently higher than levels established in BC water quality guidelines for the protection of freshwater aquatic life. The high suspended sediment load, low concentrations of bioavailable nutrients and high concentrations of total and dissolved metals identified in Mitchell and Sulphurets creeks are contributing factors to the poor productive capacity of mine site streams. The lower suspended sediment load, increased concentrations of bioavailable nutrients, and lower concentrations of total and dissolved metals identified in the Snowbank, Teigen, Treaty and Bell-Irving watersheds are contributing factors to the greater productive capacity of PTMA streams relative to the mine site.
Groundwater Quality
Groundwater quality at the mine site is heavily influenced by the sulphide ore deposits. Groundwater is acidic near, and within, the mineral deposits, with pH measurements as low as 2.5 in seeps along the valley walls of Mitchell Creek. Concentrations of certain metals are elevated in groundwater throughout the mine site, and are particularly high near and within the mineral deposits. Metals with elevated concentrations include iron, aluminum, copper, chromium, lead, manganese and zinc. Groundwater in the Mitchell Valley is not suitable for human consumption or the sustenance of fresh water aquatic life.
Wildlife Species
Mature forests, wetlands, alpine areas, and riparian forests provide high-value habitat to a diverse wildlife community. Common species or groups that occur in the RSA include ungulates (e.g., moose and mountain goat), omnivores/carnivores (e.g., grizzly bear, black bear and wolves), furbearers (e.g., fisher, marten and wolverine), hoary marmots, bats, birds (forest birds, raptors and waterfowl), and amphibians (e.g., Columbia spotted frog and western toad). Forest harvesting within the RSA has been minimal compared to many other areas in BC, due to the remoteness of the area and the relatively poor productivity of the forests, so that the wildlife habitats found in the majority of the wildlife RSA are essentially undisturbed.
20.2.2 | Economic, Social, and Cultural Setting |
Governance
There are five levels of governance in the area of northwestern BC where the 2016 PFS will be developed. Municipal, regional, provincial and federal bodies comprise the non-Indigenous forms of governance, while Indigenous communities have their own governing bodies.
The 2016 PFS is situated in the Regional District of Kitimat-Stikine, and Electoral Area A of the Bulkley Nechako Regional District. Local communities include municipalities, Nisga’a villages, Indian reserves, and unincorporated settlements. Municipal governance only exists for the District of Stewart, the City of Terrace, the Village of Hazelton, the District of New Hazelton and the Town of Smithers. The remaining communities that are not administered by Indigenous bodies (Dease Lake, South Hazelton, Bell II, Meziadin Junction and Bob Quinn Lake) are unincorporated and governed by the regional district in which they are situated.
Seabridge Gold Inc. | 20-9 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Economic Setting
Economically, the region where the Property is located has been dependent upon timber and minerals for well over 100 years. The majority of non-Indigenous communities in the region were initially established to serve natural resource activities such as the mine operations near Cassiar, Stewart, Smithers, and Bob Quinn Lake. Historically, the region’s economic and social diversity has been constrained by limited access and infrastructure, lengthy distances, remote and small communities which provide limited labour or services, and long winters. More recently government and private investment has improved road access, port development, and independent power generation, and brought provincial grid power into some parts of the region. The Red Chris and Brucejack mines recently opened, providing long-term direct and indirect employment to local communities and others within and outside of the region.
Forestry, fishing, and mining were the key economic drivers of northwestern BC through the 1950s to the 1980s. Today, the economies of local communities continue to be largely resource-based, and focus on supporting these sectors in the region.
Overall, the economy in northwestern BC is gradually becoming more diversified and now includes hydroelectric power generation. In some communities, employment levels have increased in the public service, sales and service, tourism, transportation, and mineral exploration sectors. Employment sectors in local Indigenous communities now include sales and service, mineral exploration, labour and government administration components. There are recent signs that the population decline may be reversing.
Today, the mining industry continues to provide an important source of employment in the region, supplying an estimated 30% of jobs for communities along Highway 37 in recent years.
Social Setting
Recent economic conditions in the mining sector influence population levels in regional communities. Population losses have stabilized and are now increasing with the opening of Brucejack and Red Chris mines, hydroelectric power operations, port development and a healthy mineral exploration industry.
Indigenous Groups
Several Indigenous groups may be potentially affected by the development of KSM. The PTMA is situated within the Nass Area, as defined by the NFA, which came into effect on May 11, 2000. The Tahltan First Nation (as represented by the Tahltan Central Council) asserts a claim over part of the 2016 PFS footprint. Both the Gitanyow First Nation (notably wilp Wiiltsx-Txawokw) and the Gitxsan Nation (as identified by the Gitxsan Hereditary Chiefs Office), including wilp Skii km Lax Ha, which represented itself separately in the EA process, have identified potentially affected interests within the broader region, notably downstream of the PTMA. The Skii km Lax Ha are claiming an area covering the mine site and PTMA.
Seabridge Gold Inc. | 20-10 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Land Use Setting
The Property is located in an area of northwestern BC known as the “Golden Triangle”, due to its high mineral potential and the occurrence of several gold projects in the region. For the past century, land and resource uses in the region have been largely driven by forestry, mining and mineral exploration, and this is still true today. A limited amount of commercial and non-commercial recreation also occurs in the region, including hunting, trapping, fishing, heli-skiing, hiking and camping.
Land Use Planning Context
The KSM area is subject to the provisions of two land use plans—the Cassiar Iskut-Stikine Land Resource Management Plan (LRMP) and the Nass South Sustainable Resource Management Plan (SRMP), developed in partnership with Indigenous groups, government and non-government interests.
Mineral resource activity, timber harvesting, commercial recreation and tourism, guide outfitting, hunting, fishing, trapping and cultural land uses are all allowable activities within these land use plans.
20.3 | Water Management |
20.3.1 | Overview of Water Management |
An extensive system of water management facilities will be constructed and maintained throughout the life of the KSM mine to divert fresh (non-contact) water away from disturbed areas and to collect water that has contacted disturbed areas (contact water) for treatment before release into the environment. Please refer to Section 18.2 of this PFS for details of the updated water management plans for KSM.
An overview of the Water Management Plan for operations is included in Figure 20.1.
Seabridge Gold Inc. | 20-11 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 20.1 KSM Mine Site Water Management Schematic
Seabridge Gold Inc. | 20-12 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
20.3.2 | Summary of Water Management Plan |
Objectives and Targets
The objectives of the Water Management Plan are to provide a basis for management of surface water on site including:
● | diverting non-contact water around the mine site and PTMA |
● | protecting ecologically sensitive areas and resources and avoiding harmful impacts to aquatic life and wildlife habitat |
● | providing and retaining water for mine operation |
● | defining required environmental control structures |
● | collecting and treating contact water from the mine site to meet discharge requirements prior to release to the receiving environment. |
The targets intended to optimize the Water Management Plan to achieve surface water objectives include:
● | minimizing the production of contact water by implementation of best management practices and water diversion measures |
● | collecting and treating contact water where required in order to meet applicable water quality standards |
● | implementing and maintaining an on-site monitoring and control system to regulate surface water quantity and quality. |
Legislation and Standards
The Water Management Plan has been developed in accordance with the following legislation:
● | BC Mines Act (1996) |
● | Fisheries Act (RSC 1985, c F-14) |
● | Canada Water Act (1985, c. C-11) |
● | BC Water Sustainability Act (2014) |
● | BC Water Protection Act (1996). |
Processing and Tailing Management Area
Water management in the PTMA is focused on the construction of diversion channels to control and divert water in the PTMA catchment area to either South Teigen Creek or North Treaty Creek.
Monitoring
Monitoring programs will enable KSM mine operators to measure the success of its management strategies and to identify where additional mitigation is necessary.
Seabridge Gold Inc. | 20-13 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Several management plans and monitoring programs include components that will assist in ensuring the long-term protection of the aquatic environment downstream of Property.
20.4 | Waste Management |
20.4.1 | Tailing Management Facility Management and Monitoring Plan |
Tailing produced after the mined ore has passed through a process of high pressure grinding, flotation, and leaching at the Treaty OPC will be transported by slurry pipeline to the TMF. Conventional flotation tailing will be stored in two cells, the North Cell and the South Cell. A separate tailing stream consisting of sulphide-rich CIL residue tailing, produced as a waste product in the cyanide leaching process, will be transported in a pipeline to a fully lined CIL Lined Pond located in the Centre Cell between the North and South cells, and will operate during the filling of the North and South cells. The TMF is designed to store 2.3 Bt of tailing produced over the 53-year mine life.
The TMF will ultimately consist of three storage cells retained by four compacted cyclone tailing dams: the North Dam, the Splitter Dam, the Saddle Dam, and the Southeast Dam. The tailing dams will be constructed to final heights of 218 m, 194 m, 168 m, and 239 m, respectively. Seepage from the tailing dams will be collected in seepage collection ponds constructed downstream of the tailing dams.
The tailing dams and associated seepage recovery dams proposed for the 2016 PFS fall into the category of major dams. Prior to commencing work, plans, operating and monitoring procedures, developed in concert with an Independent Tailing Review Board, must be submitted for approval by the Chief Inspector of Mines. The Code also requires supporting plans to address ML ARD, Reclamation and Closure, Emergency Preparedness and Response, and closure cost estimates for security bonding. Please refer to Table 22.5 for the cost.
KSM Mining ULC has obtained Batch 1 of permits for the initial 3 years of construction but has yet to develop and submit detailed applications for the Mines Act permit to construct, operate and close the TMF. A set of detailed mine development and reclamation plans will be submitted at a future date as part of the Mine Plan and Reclamation Program Permit application.
Monitoring
A monitoring program will be developed that will include requirements for inspection of dams and water control structures and procedures for instrumentation monitoring during the construction, operation, and closure phases. The results of the monitoring program will be reviewed on a regular basis to measure the success of the management strategies, to compare the recorded data against design criteria, and to identify where design changes or additional mitigation may be necessary.
A schedule for routine inspection and instrumentation monitoring will be developed at the time of mine permitting based on the mine construction and operation schedule. Additional inspections of the dams and water control structures will be undertaken following extreme rainfall events, significant runoff events, or significant earthquake events.
Seabridge Gold Inc. | 20-14 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
The TMF will remain in operation after the end of mining operations until such time as the quality of the water stored in the impoundment reaches an acceptable level for discharge and reclamation is completed. The dam and associated facilities will require ongoing monitoring and maintenance to ensure dam safety and to meet regulatory requirements for dam safety.
In the event of temporary mine closure, visual inspection and maintenance of the dams, diversion channels, collection ditches, and spillways will be required.
20.4.2 | Best Available Tailings Technology Assessment |
Seabridge recently completed an assessment of tailing technologies, tailing facility locations, and management practices. The assessment was an update of the tailing alternative assessment that was completed as part of the Application/EIS and the Schedule 2 Amendment process and subsequently re-completed in 2015–16 to ensure that the appropriate tailing technology for the project had been selected (see Chapter 33 and Appendix 33-B of the Application/EIS; https://ksmproject.com/bat-report/).
20.4.3 | Waste Rock Management |
The proposed management of waste rock is outlined in the Rock Storage Facilities Management and Monitoring Plan, which can be found in Volume 26 of the Application/EIS (Rescan 2013).
Waste rock from open pit and underground mining operations that is not used for construction purposes will be consigned to the Mitchell RSF located in the Mitchell Creek Valley and to the McTagg RSF located in the McTagg Creek Valley. Waste rock from the Kerr pit will be backfilled into the mined-out Sulphurets pit. All waste rock placed in the RFSs is assumed to be potentially acid generating. The total amount of mine waste rock to be removed during open pit excavations at the Mitchell pit, Sulphurets pit, and Kerr pit is approximately 3 Bt over the LOM.
NPAG mine waste rock removed from the Sulphurets pit during pre-production will be used to construct the basal drain beneath the Mitchell RSF, and it will be used as rockfill material in the construction of the WSD. A rock drain will also be constructed under the McTagg RSF.
The RSFs proposed for 2016 PFS fall into the category of a major dump as defined under Section 10.5.5 of the Code (BC MEMPR 2017).
A set of detailed mine development and reclamation plans will be submitted at a later date as part of the Mine Plan and Reclamation Program Permit application. The following sections outline the general provisions included in these documents in terms of RSF operation and monitoring.
Seabridge Gold Inc. | 20-15 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Closure
For long-term stability and reclamation purposes, the slopes of the Mitchell and McTagg RSFs will be re-contoured at closure. The modifications to the RSF areas will include:
● | re-contouring the Mitchell and McTagg RSF slopes below an elevation of 1,100 m (treeline) to an overall slope of 2H: 1V (27°) with a 50 cm soil cover and vegetated |
● | re-contouring the western face of the Mitchell RSF below an elevation of 840 m |
● | above the treeline, higher benches are proposed to be left un-vegetated to reflect existing talus slopes present in the Mitchell and McTagg Creek valleys. |
Please refer to the Application/EIS (Volume 26) (Rescan 2013) for further details.
Post-closure
The post-closure phase includes complete reclamation of the RSFs and continued treatment of water collected in the WSF until the water quality meets acceptable standards for direct discharge to the environment. At that time, all facilities will be decommissioned and flows downstream of the mine site will be restored to pre-mine conditions.
20.4.4 | Domestic and Industrial non-hazardous and hazardous Waste Management |
The proposed management of domestic and industrial waste, including hazardous and non-hazardous waste, and dangerous goods is outlined in the Domestic and Industrial Waste Management Plan and Dangerous Goods and Hazardous Materials Management Plan, (Waste Management Plans) which can be found in the Application/EIS (Volume 26) (Rescan 2013).
Landfills
Two landfills will be established, one in the Mitchell OPC and one in Treaty OPC. The landfills will be used to dispose of only solid inert, non-reactive waste such as used conveyor belts, empty dry latex paint cans, grinding balls, air filters, non-recyclable plastics, and incinerator ash. To deter wildlife attraction to the landfill, the landfill will be fenced and only solid inert waste that will not act as a wildlife attractant will be deposited there. The garbage will be periodically covered with not potentially acid generating waste rock or local till to prevent wind loss and to mitigate wildlife attraction.
Hazardous Waste
Hazardous waste will be produced in all phases. It includes materials such as waste oil, laboratory chemicals and solvents, lead-acid batteries, oil filters, and used oily rags and absorbent pads.
The Hazardous Waste Regulation (BC Reg. 63/88) under the Environmental Management Act (2003) defines “hazardous waste” (see Volume 26 of the Application/EIS for additional details). Any updates on hazardous waste management since the Application/EIS can be found in Section 18.0 of this PFS.
Seabridge Gold Inc. | 20-16 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Closure and Decommissioning
Activities during the closure phase will be similar to the activities during the construction phase. A range of materials will become available for salvage, recycling, or disposal with the dismantling and removal of buildings, surface structures, fuel tanks, etc. The Reclamation and Closure Plan will cover the closure, reclamation, and decommissioning of the mine infrastructures in detail.
Waste Management during Closure
Significant amounts of waste will be generated from the dismantling of buildings and process-related materials. The approach for waste management during closure will be to identify feasible salvage and recycling options.
Upon closure, the buildings, facilities, and process equipment will be dismantled and either disposed of at the site landfill (inert non-reactive materials only) or removed from the site for recycling and/or disposal. Any equipment or materials with market value will be removed for capital recovery.
20.5 | Air Quality Management including Greenhouse Gases |
The proposed management of air quality, including greenhouse gases, is outlined in the Air Quality Management Plan and Greenhouse Gas Management Plan, which can be found in the Application/EIS (Volume 26) (Rescan 2013).
20.6 | Environmental Management System |
Seabridge has developed a conceptual Environmental Management System (EMS) and associated Environmental Management Plans for KSM. As stated in the KSM Project AIR document approved by the British Columbia Environmental Assessment Office (BC EAO; 2011), Environmental Management Plans are essential for the EMS for any major development.
An EMS is a requirement of a Mines Act Permit for mines in BC and is the high level framework supporting each Environmental Management Plan. Environmental Management Plans are the specific and detailed goals, objectives, and procedures for the protection of worker health and safety, environmental monitoring, and operating procedures that show the regulatory agencies how legislation and regulations will be met at the mine site and the PTMA. Environmental Management Plans are managed collectively under the umbrella of the EMS.
Environmental Management Plans are to be applied during the planning, construction, operation, closure, and post-closure phases of KSM.
Seabridge Gold Inc. | 20-17 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
20.7 | Closure and Reclamation |
Closure and reclamation planning for KSM will contribute to the success of closure and reclamation during mining and at the end of mine life, which will reduce the need to restructure the infrastructure components, limit the amount of material re-handling, and reduce the environmental effects. Mine development and operation will incorporate techniques to minimize surficial disturbance and, where possible, progressively reclaim areas affected during construction and operation. Stabilizing and rehabilitating surfaces will reduce the potential for degradation of the resources due to extended exposure to climatic factors, reducing closure-related capital costs at the cessation of mining activities.
20.7.1 | Closure and Reclamation Objectives |
The conceptual closure and reclamation plan has three objectives that provide assurance to the Province that the site will be left in a condition that will limit the future liability to the people of BC:
● | to provide stable landforms |
● | to re-establish productive land use |
● | to protect terrestrial and aquatic resources. |
Provision of Stable Landforms
The design of KSM’s permanent mine-related landforms, such as the open pits, the TMF, the WSD that will impound the WSF at the mine site, seepage containment dams, and the RSFs, has been undertaken to ensure long-term stability during mine operations, after mine closure, and after reclamation works are complete.
Re-establishment of Productive Land Use
The pre-development land use and conditions form the basis for setting the end land use and capability objectives. The goal is to return the site to a use consistent with the current land uses. The current land use information has been obtained from the environmental and socio-economic baseline studies (Appendix 23-A of the Application/EIS) (Rescan 2013). These studies were undertaken in consultation with the KSM Project EA Working Group which includes provincial and federal government agencies, Nisga’a Nation, Tahltan Nation, Gitxsan Nation, Skii km Lax Ha, and the Gitanyow First Nation.
The end land use objective will be primarily to provide for wildlife habitat for the described wildlife species, including bears, mountain goats, and moose.
20.7.2 | Soil Handling Plan |
The general goal of reclamation is to restore, where possible, the equivalent land capability so that end land use objectives can be achieved. Site reclamation planning will include the conservation of soil materials suitable for reclamation purposes in areas disturbed by mining, and these areas will be re-vegetated, where feasible. The landforms resulting from KSM mine development will also be designed, where possible, and reclaimed to accommodate the desired end land use objective, involving development of appropriate and functional ecosystems, as supported by appropriate soil material handling and re-vegetation strategies.
Seabridge Gold Inc. | 20-18 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
20.7.3 | Closure and Reclamation Planning |
Mitchell Pit and Block Cave Mine Closure
In the 2016 PFS, the Mitchell deposit will be mined as an open pit from Year -2 to Year 24, with an ultimate wall height of 1,230 m, and as an underground block cave mine from Year 23 to Year 53. Closure of the Mitchell pit includes backfilling with water to form a pit lake and placing large rocks on the benches to discourage wildlife access to the pit lake. The Mitchell pit cannot be backfilled with water until underground mining is completed.
Block Cave Mine
At closure, all mobile equipment and supplies, petroleum products, explosives and hazardous materials will be removed and transported off-site.
By the time block caving is completed, the area within the pit directly above the block cave footprint will have subsided into a block cave crater as described in Section 16.3.
Mitchell Pit
The Mitchell pit will commence flooding after the Block Cave has been closed and will take five years
The Mitchell pit closure dam will be constructed on the west side of the Mitchell pit to allow for controlled discharge.
Twin 6 km long drainage tunnels (the Mitchell underground drainage tunnels) will be used to dewater the underground works during operation. At closure, each of these tunnels will be sealed with an engineered concrete plug.
Sulphurets Pit Closure
The Sulphurets pit will be backfilled with the waste rock from the Kerr pit. The Kerr waste rock is predicted to have elevated selenium concentrations, so it will be placed in the Sulphurets pit to allow for the management of selenium.
Kerr Pit Closure
The Kerr pit external haul roads will be decommissioned. The cut and fill slopes will be re-graded for stability, where required. The culverts will be removed, and cross ditches will provide drainage. The surface will be ripped to reduce surface erosion. Any available stored topsoil material will be spread on the surface and re-vegetated. The access road will be retained to permit ongoing inspection of the pit.
Sulphurets-Mitchell Conveyor Tunnel (SMCT) and Associated Overland Conveyors Closure
At closure, the 3 km long SMCT will be dismantled and all mobile equipment and supplies will be removed from the tunnel. The non-salvageable electrical cables and conveyor will be left in the tunnel. The south portal, located adjacent to the Sulphurets pit, and a north portal, located west of Mitchell pit, will both be sealed with engineered concrete plugs.
Seabridge Gold Inc. | 20-19 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Iron Cap Block Cave Mine Closure
At closure, all mobile equipment and supplies, petroleum products, explosives and hazardous materials will be removed and transported off-site. The major infrastructure, such as crushers, rock breakers, conveyors, electrical cable and piping will be left in the mine.
Mitchell OPC
Closure
At the completion of mining, the Mitchell OPC will be decommissioned. Equipment will be removed from the site. The electrical substation will remain. All other structures will be dismantled and removed. Foundations will be broken up, and the concrete rubble will be buried on site. Any soils that are contaminated with fuel will be excavated and treated at a landfarm to remediate the soil.
Reclamation
The Mitchell OPC ground surface will be ripped and covered with crushed rock and up to 50 cm of topsoil prior to re-vegetation with native species
Mitchell Diversion Tunnels Closure
These diversion tunnels will also be used to generate hydroelectric power from the Upper Sulphurets Power Plant during operations. The diversion tunnels will continue to be used for hydro-electric power generation during closure, except when the water is being diverted to the Mitchell pit. The electricity generated will be used to operate the HDS WTP.
McTagg Diversion Tunnels Closure
The McTagg Power Plant will be located east of the Gingras Creek bridge and will be maintained indefinitely to generate electricity. The electricity will be used to operate the HDS WTP, or sold for use in the provincial electricity grid.
Water Storage Facility and Water Treatment Plant
The WSF will remain in service after mine closure to continue collecting contact water that requires treatment.
The HDS WTP and support infrastructure will remain in operation during the closure and post-closure phases. The plant will operate primarily in the spring, summer, and fall months, and minimally in the winter. The lime material will be transported to the site and consumed during these warmer periods. At closure and post-closure, the filter cake (sludge) will be hauled by truck during the summer to the top of the RSFs and placed in an engineered landfill.
An ion exchange Selenium WTP located near the WSD will remain in service after mine closure.
Seabridge Gold Inc. | 20-20 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
At closure and post-closure, the tunnels will be required to provide ongoing access to the mine site because the CCAR, which serves the mine site during operation, will be decommissioned. As the HDS WTP will continue to operate post-closure, lime will be required and will be transported from the PTMA through the tunnels to the mine site. All supplies for monitoring, maintenance, and the operation of the HDS WTP will be transported through the tunnels. The train logistics system will be reconfigured and simplified to handle this much reduced traffic requirement.
Treaty Process Plant, Carbon-in-Leach Plant, and Other Structures Closure
Closure
Several structures at the PTMA that will be closed at the completion of mining including the Treaty Process Plant, the CIL Plant, the Treaty OPC waste management facilities, the Treaty OPC Batch Plant, the crusher building, and several other structures such as the warehouse and lab. All of these structures contain equipment that must be removed at closure.
Once all of the equipment has been removed, the buildings will be dismantled and the materials will be moved off-site for recycling or disposal. Any contaminated soil will be collected and placed in the landfarm. Any materials that can be incinerated will be incinerated on site. The concrete foundations of the various buildings will be broken up, buried, and used for road maintenance or as armouring in TMF reclamation. All equipment and debris will be removed from around the structures.
Reclamation
The footprint areas and the area surrounding the buildings will be deep-ripped to reduce compaction and to improve surface drainage. Approximately 30 cm of soil will be spread over the area as the surface material to improve conditions for vegetation establishment and growth of native plants.
Coarse and Fine Ore Stockpiles Closure
Closure
All of the ore in the coarse and fine stockpiles will be processed. The footprint areas will be cleaned and ripped to reduce compaction and to increase downward drainage.
Reclamation
The footprint areas will be covered with a lime mixture and topsoil, and then vegetated with native plants as described for the RSFs.
Treaty Ore Preparation Complex Batch Plant Stockpile Closure
The Treaty OPC may contain stockpiled materials left over from operations consisting of sands and gravels. Any remaining materials will be used for road maintenance or as rip-rap along the beach edges in the TMF.
Seabridge Gold Inc. | 20-21 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Structures Required Post-closure
Some structures in the PTMA will be required for on going monitoring of mine post-closure. These include:
● | the office complex |
● | the ambulance building |
● | substation 1 |
● | the operating camp incinerator |
● | the administration building |
● | the operating camp (reduced in size from the operation phase). |
As described above, the MTT will remain open because the HDS WTP will continue to operate post-closure, and reagents, including lime and personnel operating the HDS WTP, will be transported through the tunnels. A smaller camp will be required to accommodate personnel.
Tailing Management Facility Closure
Following operations, the TMF will be reclaimed to provide for wildlife and wetland habitat. The dams and beaches of the TMF will be reclaimed in stages, with the North Cell being reclaimed during operation, the South Cell during closure, and the Centre Cell during post-closure. The TMF facility will be reclaimed in accordance with the described reclamation and closure plan as follows.
The TMF North Cell will be closed approximately 5 years after tailing deposition into it ceases following expansion of the beach area and the time for water quality to improve for discharge.
The South Cell will be closed in a similar manner to the North Cell.
The Centre Cell is the last cell to be closed, which will be about 5 years following mine closure. The CIL tailing in the CIL lined pond will be covered with approximately 1 m of non-reactive tailing and submerged under 5 m of water.
Access Roads
Treaty Creek Access Road Closure
During closure and post-closure, the TCAR will provide the only remaining road access to the Property. All materials and personnel will be transported via the TCAR, which will extend to the Treaty OPC and the MTT portals, which will all remain open to allow for access to the mine site post-closure.
Coulter Creek Access Road Closure
The CCAR will be decommissioned post-closure. The bridges will be dismantled, and materials that are combustible will be burned. Concrete will be broken and used as rip-rap along the creeks, if required, to reduce potential surface erosion that could occur during the dismantling of the bridges.
Culverts will be removed to restore natural drainage patterns. Cross-ditching will provide drainage across roads and will reduce the potential for surface erosion. The surface of the road and any compacted areas will be ripped, where required, to promote surface drainage and to reduce runoff and potential road bed failure.
Seabridge Gold Inc. | 20-22 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Quarry and Borrow Sources Closure
The borrow areas will be cleared and grubbed. The quarry and borrow areas will be re-sloped and re-contoured to ensure escape routes for wildlife and to restore natural landscape.
Mini Hydro Plants and Energy Recovery
Energy recovery and mini-hydro plants are included in the KSM mine development plan. These plants generate electrical power by making use of facilities already included in the 2016 PFS, resulting in significant net energy savings. The power plants will be used to provide electricity for the mine closure requirements, or the electricity may be sold back to BC Hydro under the Standing Offer Program.
Water Treatment Plant Energy Recovery
Water pumped from the water storage pond to the HDS WTP will generate electric power. A small impulse Turgo-type turbine will be used. The output may be fed into the plant power distribution system at the HDS WTP. This facility will continue to operate after mine closure.
McTagg Diversion Hydro – McTagg Power Plant
The McTagg Power Plant will generate energy at the downstream outlet of the MTDT. The McTagg Power Plant will be constructed in Year 10, once the diversion tunnel inlets of the MTDT are raised in Phase 2. It will consist of two Pelton turbines and will feed power into the plant distribution system at the HDS WTP. This facility will continue to operate after mine closure.
Construction and Operation Camps
Closure
There will be 2 operating camps (the Mitchell Operating Camp and the Treaty Operating Camp) and 10 construction camps.
The camps will generally include portable trailers, an incinerator, materials and equipment storage areas, a helicopter pad, a helicopter fuelling area, fuel storage, a septic field, water/sewage treatment, and diesel generators. The portables will be set up so that they can be dismantled and used at the different sites, as required.
All construction and operation camp sites will be reclaimed to a slope compatible with the surrounding natural topography. The high traffic areas will be ripped in two directions to increase surface drainage and to allow for deeper root penetration.
Reclamation
Prior to construction, topsoil will have been salvaged from the camp site areas and stockpiled along the edges of the camps. At closure, this soil will be spread over the disturbed areas. These areas will then be re-vegetated with the native grasses, shrubs, and tree seedlings that were described for the RSFs.
Seabridge Gold Inc. | 20-23 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
21.0 | Capital and Operating Cost Estimates |
21.1 | Initial Capital Costs |
An initial capital of US$5.005 billion was estimated for the 2016 PFS, based on capital cost estimates developed by the following consultants:
● | MMTS: open pit mining, mine roads, ore trains, and infrastructure and water diversion tunnels |
● | Lambert Civil Consulting Ltd. (LCC): costing of water management structures and the TMF, designed by KCB |
● | EBC Inc. (EBC): costing of the WSD, designed by KCB |
● | Tetra Tech: process plant and associated infrastructure, including plant site preparation, water treatment plant, construction camps, winter access road and review of KCC and EBC cost estimates |
● | Brazier: permanent power supply, fire detection, mini hydro plant, and energy recovery systems |
● | ERM: environmental |
● | BGC: landslide management, avalanche management, and pit depressurization |
● | McElhanney: main access roads (TCAR, CCAR) |
● | Seabridge: Owner’s costs. |
All currencies in this section are expressed in US dollars, unless otherwise stated. Costs have been converted using a fixed currency exchange rate of US$0.80 to Cdn$1.00. Metal prices are based on the three-year trailing average prices from July 31, 2016 back to August 1, 2013.
The expected accuracy range of the capital cost estimate is +25/-10%.
The costs stated in Table 21.1 include only initial capital, which is defined as all costs to build the facilities that mine, transport, and process ore to produce first concentrate and doré. Costs incurred during ramp-up of the mine and process plant in Year 1, through commercial production, are included in the operating costs in Section 21.3.
This estimate was prepared with a base date of Q2 2016. The estimate does not include any escalation past this date. Budget quotations were obtained for major equipment; vendors provided equipment prices, delivery lead times, spare allowances, and freight costs to a designated marshalling yard in northern BC, with some exceptions for delivery points to different BC locales. The quotations used in this estimate were obtained in Q1 and Q2 2016, and are budgetary and non-binding.
Seabridge Gold Inc. | 21-1 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
For non-major equipment (i.e. equipment less than US$100,000), costing is based on in-house data, quotes from previous studies. No cost escalation is included. A comparison of 2016 quotes vs. 2012 quotes for the same vendor revealed no significant trend of escalation; therefore, no escalation was applied.
All equipment and material costs include Incoterms FCA. Other costs such as spares, taxes, duties, freight, and packaging are covered separately in the estimate as indirect costs.
The initial capital cost summary and its cost breakdown structure (CBS), which is based on the work breakdown structure (WBS) for the PFS, are presented in Table 21.1.
Table 21.1 Initial Capital Cost Summary
Major
Area No. |
Major Area Description |
Cost
(US$ M) |
1 – Direct Costs | ||
1.1 | Mine Site | 1,218 |
1.2 | Process | 1,336 |
1.3 | TMF | 441 |
1.4 | Environmental | 15 |
1.5 | On-site Infrastructure | 23 |
1.6 | Off-site Infrastructure | 120 |
1.7 | Permanent Electrical Power Supply and Energy Recovery | 159 |
Total Direct Costs | 3,312 | |
2 – Indirect Costs | ||
2.91 | Construction Indirect Costs | 449 |
2.92 | Spares | 34 |
2.93 | Initial Fills | 20 |
2.94 | Freight and Logistics | 99 |
2.95 | Commissioning and Start-up | 6 |
2.96 | EPCM | 231 |
2.97 | Vendor’s Assistance | 23 |
Total Indirect Costs | 862 | |
3 – Owner’s Costs | ||
3.98 | Owner’s Costs | 160 |
4 – Contingency | ||
4.99 | Contingency | 671 |
2016 PFS Capital Cost Total | 5,005 |
Notes: Costs have been rounded to the nearest million dollars.
Seabridge Gold Inc. | 21-2 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
21.1.1 | Exclusions |
The following items are not included in the capital cost estimate:
● | force majeure |
● | schedule delays, such as those caused by: |
– | major scope changes |
– | unidentified ground conditions |
– | labour disputes |
– | environmental permitting activities |
– | abnormally adverse weather conditions |
● | receipt of information beyond the control of the EPCM contractors |
● | salvage value for assets only used during construction |
● | cost of financing (including interests incurred during construction) |
● | sales taxes (PST, GST and HST) |
● | royalties or permitting costs, except as expressly defined |
● | schedule acceleration costs |
● | working capital |
● | cost of this study and future feasibility study |
● | sunk costs. |
Labour Rates
A standard labour rate has been applied to various areas of the PFS. The standard construction labour rate used is US$76.00/h (Cdn$95.00/h) and is considered fully burdened. The base labour rate of US$33.10 (Cdn$41.38) was calculated from a combination of union rates published by Mine site for BC (2015), independent contractor quotes, Christian Labour Association of Canada, and recent construction projects in BC.
21.1.2 | Direct Costs |
Mine Site
The Mine Site capital costs are US$1.2 billion and presented in Table 21.2.
Seabridge Gold Inc. | 21-3 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Table 21.2 Mine Site Capital Costs
Area
No. |
Area Description |
Cost
(US$ M) |
1.1.01 | Open Pit Mining | 436 |
1.1.02 | WSF | 285 |
1.1.03 | SWM | 222 |
1.1.04 | Water Treatment | 183 |
1.1.05 | Ancillary Buildings | 4 |
1.1.06 | Site Services and Utilities | 2 |
1.1.07 | Power Supply and Distribution | 4 |
1.1.08 | Camps | 58 |
1.1.13 | Geohazards | 24 |
Mine Site Capital Costs Total | 1,218 |
Note: Costs have been rounded to the nearest million dollars.
Open Pit Mining
Open pit capital costs were derived from a combination of supplier quotes and historical data collected by MMTS. Pre-production operating costs of the mining fleet and earth works for pioneering and construction quarries are included in the open pit mining capital.
Water Storage Facility
The WSF capital cost was estimated at US$285.6 million. The main dam structure is the largest cost at US$122.2 million.
Process
The battery limits for process are the Mitchell OPC (primary crusher), the MTT (including Saddle), trains, and the Treaty OPC (crushing, grinding, flotation and leaching equipment; the concentrator and other Treaty OPC buildings). TMF costs are separate from process costs. Process capital costs were estimated at US$1.336 billion and TMF capital costs were estimated at US$440.7 million. Details of process and OPC capital costs are presented in Table 21.3.
Table 21.3 Process-Treaty OPC Capital Cost Estimate
Area
No. |
Area Description |
Cost
(US$ M) |
1.2.01 | Primary Crushing | 52 |
1.2.02 | Ore Delivery Tunnel | 365 |
1.2.05 | MTT Material Transportation | 222 |
1.2.06 | TWTP No. 4 Water Treatment – Saddle | 4 |
1.2.07 | TWTP No. 8 Water Treatment – Treaty | 3 |
1.2.08 | Treaty OPC – Coarse Ore Stockpile | 83 |
1.2.09 | Treaty OPC – Secondary Crushing | 59 |
table continues… |
Seabridge Gold Inc. | 21-4 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Area
No. |
Area Description |
Cost
(US$ M) |
1.2.10 | Treaty OPC – Fine Ore Stockpile | 47 |
1.2.11 | Treaty OPC – Tertiary Crushing - HPGR | 70 |
1.2.12 | Process Building | 74 |
1.2.13 | Primary Grinding | 75 |
1.2.14 | Copper Flotation | 43 |
1.2.15 | Pyrite Flotation | 7 |
1.2.16 | Pyrite Concentrate Regrinding | 23 |
1.2.17 | Cyanide Leaching | 42 |
1.2.18 | Gold/Silver Refinery | 10 |
1.2.19 | Copper Concentrate Handling | 5 |
1.2.20 | Molybdenum Floatation Circuit | 4 |
1.2.21 | Molybdenum Concentrate Handling (including Leaching) | 4 |
1.2.22 | Cyanide Recovery and Destruction | 18 |
1.2.23 | Reagent Area | 5 |
1.2.24 | Plant Control System | 4 |
1.2.25 | Site Services and Utilities | 12 |
1.2.27 | Treaty OPC – Temporary Laydown Area | 1 |
1.2.30 | Treaty OPC – Ancillary Buildings | 26 |
1.2.31 | Process Plant Utilities | 7 |
1.2.32 | Treaty OPC – Mobile Equipment | 9 |
1.2.33 | Power Supply and Distribution | 6 |
1.2.34 | Treaty OPC – Roads | 1 |
1.2.35 | Treaty Operations and Construction Camps | 55 |
Process-Treaty OPC Capital Cost Total | 1,336 |
Note: Costs have been rounded to the nearest million dollars.
21.1.3 | Indirect Costs |
Indirect costs for the PFS were estimated at US$862.2 million, as shown in Table 21.4.
Table 21.4 Indirect Capital Costs
Area
No. |
Area Description |
Cost
(US$ M) |
2.91 | Construction Indirect Costs | 449 |
2.92 | Spares | 34 |
2.93 | Initial Fills | 20 |
2.94 | Freight and Logistics | 99 |
2.95 | Commissioning and Start-up | 6 |
2.96 | EPCM | 231 |
2.97 | Vendor’s Assistance | 23 |
Indirect Capital Costs Total | 862 |
Note: Costs have been rounded to the nearest million dollars.
Seabridge Gold Inc. | 21-5 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
21.1.4 | Owner’s Costs |
An estimate of US$160.2 million is included in the capital cost estimate for Owner’s costs. This cost had been calculated by Seabridge from first principals based on personnel requirements and onboarding of Owner's staff for supporting both the latter part of the commissioning effort for the construction and onboarding to fill all operations and G&A departments. In addition to labour costs, Owner's costs include off-site office staffing, off-site office facilities, travel, off-site office general expenses, recruiting and training expenses, consulting, insurance, general field expenses, and mineral lease/claims costs. Environmental department in the Owner’s costs include environmental monitoring programs, community relations, communication and public relations, wetland compensation, and permitting costs. Limited duty expenses are also included for certain large capital equipment imported from outside North America.
21.1.5 | Contingency |
A contingency allowance is included to cover additional costs that could occur as a result of more detailed design, unexpected site conditions, or unusual cost escalation. This estimate adequately covers minor changes to the current scope expected during the next phase of this PFS. The estimated contingency cost is US$671.0 million. The contingency estimate was developed on a line-item basis to account for the specific design details and information available for each area, rather than a single value applied to the sum of all direct, indirect, and Owner’s costs. The values applied range from 5 to 25%.
21.2 | Sustaining Capital Costs |
The sustaining capital costs are all capital costs required from Year 1 of operations to sustain the mining operation for the LOM. Details of the total sustaining cost of US$5.503 billion, required for the LOM, is presented in Table 21.5.
Table 21.5 Sustaining Capital Costs
Major Area
No. |
Major Area Description |
Cost
(US$ M) |
1.1 | Mine Site | 3,933 |
1.2 | Process | 355 |
1.3 | TMF | 502 |
1.5 | On-site Infrastructure | 0 |
1.6 | Off-site Infrastructure | 11 |
1.7 | Permanent Electrical Power Supply and Energy Recovery | 196 |
2.91 | Construction Indirects | 57 |
2.92 | Spares | 33 |
2.94 | Freight and Logistics | 66 |
2.96 | EPCM | 22 |
2.97 | Vendor's Assistance | 35 |
4.99 | Contingency | 293 |
Sustaining Capital Cost Total | 5,503 |
Note: Costs have been rounded to the nearest million dollars.
Seabridge Gold Inc. | 21-6 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
21.2.1 | Mine Site |
The sustaining capital for the Mine Site is US$3.9 billion presented in Table 21.6. This number covers the direct capital costs for the LOM and includes all open pit and underground mining operations, as well as the Selenium WTP and the geohazards direct capital cost.
Table 21.6 Mine Site Sustaining Capital Costs
Area
No. |
Area Description |
Cost
(US$ M) |
1.1.01 | Open Pit | 821 |
1.1.03 | SWM | 262 |
1.1.04 | Water Treatment | 113 |
1.1.05 | Ancillary Buildings | 44 |
1.1.09 | Mitchell Block Caving | 1,848 |
1.1.10 | Iron Cap Block Caving | 780 |
1.1.11 | Kerr Pit Power Supply | 5 |
1.1.12 | Sulphurets Pit Power Supply | 2 |
1.1.13 | Geohazards | 58 |
Mine Site Sustaining Capital Cost Total | 3,933 |
Note: Costs have been rounded to the nearest million dollars.
21.2.2 | Open Pit Mining |
Sustaining capital is based on both fleet expansions and unit replacements over the LOM. Major fleet expansions were planned for Years 1, 6, and 10 as the mining rate and haul distances increase. Capital replacement costs for mobile equipment were calculated based on the expected life of the equipment, the cost of the unit, and the utilization for that equipment.
21.2.3 | Underground Mining (Block Caves) |
The capital costs presented in this section are for both Iron Cap and Mitchell block cave mines, and are a combination of direct and indirect costs, and applied contingencies. The direct cost estimates have been obtained from supplier quotes for the major mobile equipment and capital infrastructure, such as conveyors, crushers, and ventilation infrastructure. Mine development, mobile equipment costs, and certain fixed and ventilation costs are the responsibility of Golder. The costs for the conveyors, secondary rock breakers (if applicable), crushers, related ancillary underground installations, and indirect costs on infrastructure are the responsibility of Tetra Tech. The underground electrical system cost estimate is the responsibility of Brazier.
Seabridge Gold Inc. | 21-7 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Mitchell Block Caving
The Mitchell block cave mine capital cost estimate includes the purchase and installation of all equipment and the excavation of all the underground excavations. The total capital costs are US$1.8 billion, which also includes a unit capital cost of US$4.50/t.
Iron Cap Block Caving
The Iron Cap block cave mine capital cost estimate includes the purchase and installation of all equipment and the excavation of all the associated underground workings. The total capital costs were estimated to be US$872 million, which also includes a unit capital cost of US$3.87/t.
21.2.4 | Mine Site Water Treatment |
HDS WTP
The sustaining water treatment cost for the Mine Site is US$113.1 million.
The water treatment capacity at the HDS WTP will increase with the addition of two more clarifiers to cater for the increased water flow that is expected.
When the HDS WTP is commissioned in Year -1, the initial maximum throughput capacity will be 5.35 m3/s.
In Year 5, the plant capacity will increase from the 5.35 m3/s initial capacity to the 7.5 m3/s final capacity. Two additional circuits will be constructed and operated in parallel to the existing five circuits.
Selenium WTP
In Year 5, a 500 L/s Selenium WTP, located adjacent to the WSF near the toe of the Mitchell/McTagg RSFs, will be constructed and become operational to treat seepage from the Sulphurets pit backfill (Kerr waste rock), seepage from the RSFs, and water pumped from the WSF.
21.2.5 | Process |
Process sustaining capital costs include the Sulphurets pit primary crusher and ore delivery tunnel installed in Year 1, and the Kerr pit primary crusher and rope conveyor installed in Year 23. New primary crushers will be installed for the Mitchell underground mine in Year 22 and for the Iron Cap underground mine in Year 31.
During operation, some process related facilities will be constructed after commissioning of the Process Plant. A 3.0 km SMCT connecting the Mitchell and Sulphurets sites, will be constructed in Year 1. An overland conveyor will be installed inside SMCT for ore conveyance.
The ore from the Kerr deposit, together with the ore from other deposits, will be introduced to the Process Plant starting from Year 24. The ore will be further conveyed through the SMCT to the Sulphurets/Kerr coarse ore stockpile at the Mine Site. The waste rock from the rope conveyor will be backfilled into the Sulphurets pit.
Seabridge Gold Inc. | 21-8 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
The Iron Cap ore and the lower Mitchell ore will be mined by block caving and crushed on their own sites to 80% passing 150 mm or finer. The crushed ores will be conveyed to the train transport system for delivery to the coarse ore stockpile at the Treaty OPC.
The estimate also includes a replacement allowance for major process equipment.
The process sustaining capital cost was estimated at US$355.4 million.
21.2.6 | Northwest Transmission Line Contribution |
The 344 km long, 287 kV NTL runs from the Skeena substation near Terrace, BC, to a new substation near Bob Quinn Lake. This new transmission line was commissioned in the summer of 2014 and currently serves the AltaGas Forrest Kerr Hydroelectric Facility and the Red Chris Mine. A tap from this transmission line will service the KSM operation.
Due to an overrun in the construction cost of the NTL, BC Hydro Tariff Supplement TS37, as approved by the BCUC, was put in place requiring NTL customers to share in the overrun cost. In accordance with TS37, based on a contract (peak) demand of 200 MVA, the required contribution will be just over US$167.7million (Cdn$209.6 million). This amount is separate from system reinforcement and is a required cash contribution. The tariff is not due until the start of commercial production, and BC Hydro offers the option of spreading the payments out over five years, with an applicable finance charge, that is applied in the 2016 PFS.
21.2.7 | McTagg Diversion Tunnel Mini Hydro Generation Station |
The MTDT mini hydro generation station installation is included in sustaining capital. The current tunnel designs show the initial available hydraulic head to be too low to allow the station to be effective if installed during initial construction. No power will be generated from the Phase 1 MTDT. A penstock tunnel and penstock will be constructed in Phase 2. To enhance hydro power generation during low-flow periods, weirs will be established in Gingras Creek just upstream of the Phase 2 and Phase 3 portals to capture base flow from Gingras Creek. The base flow will be routed to the penstock where it will be combined with the McTagg base flows to increase hydro power generation. Flows in excess of the capacity of the McTagg Power Plant will bypass the de-sanding works and exit into Gingras Creek via the portals. The base flow from the Phase 2 and Phase 3 diversions will pass through a 1 m steel penstock pipe set in a plug at the junction of the penstock tunnel with the diversion tunnel. This pipe will run out to the surface in the penstock tunnel, exiting at a portal on the slope above the McTagg Power Plant. A buried steel penstock will then run down the slope to the McTagg Power Plant. The MTDT mini-hydro generation cost was estimated at US$28.0 million.
21.2.8 | Tailing Management Facility |
The sustaining capital for the TMF is US$501.4 million.
Seabridge Gold Inc. | 21-9 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Initial capital comprises initial TMF perimeter diversions; the North Dam, Splitter Dam, and Saddle Dam; and associated seepage collection dams that form the North and Centre cells. This includes basin preparation for the starter basins for the North Cell and Centre Cell, preparing and lining the starter basins, and provision of liner drainage.
Dam raising for the North and Centre cells is accounted for in both sustaining and operating expenses. Borrow, haul, and placement of till core and expansion of basin preparation, drains and liner are considered sustaining expenses that begin in Year 1. The processing and placement of cycloned sand is considered an annual operating expense for all stages through the LOM.
The South Cell includes additional sustaining capital items occurring between Year 23 and the LOM. These include development of additional perimeter diversions for the South Cell and the Southeast Starter Dam and associated seepage dam. The expansion of the Centre Cell continues as sustaining capital until the end of mine life and the cyclone sand raising continues as an operating expense.
Ancillary expenses such as seepage pumping and monitoring are included as operating expenses throughout the LOM.
21.2.9 | Other Sustaining Capital Costs |
Other sustaining capital costs were estimated at US$713.7 million, mostly consist of permanent power supply, energy recovery plants, indirect sustaining capital costs and contingency.
21.3 | Operating Costs |
The average operating cost was estimated at US$12.03/t milled at the nominal process rate of 130,000 t/d, or US$12.33/t for the LOM average. The operating cost estimate does not include the energy recovery credits (approximately US$0.12/t milled LOM) from mini-hydro power stations and the cost relegated to PST (approximately US$0.15/t milled LOM).
The mining operating costs are LOM average unit costs calculated by dividing the total LOM operating costs by LOM milled tonnages. The costs exclude mine pre-production costs.
The cost distribution for each area is shown in Figure 21.1. All costs are expressed in US dollars, unless otherwise specified.
The operating cost estimates in this section are based on budget prices obtained in Q1/Q2 2016 and/or from databases of the consulting firms involved in preparing the operating cost estimates.
When required, certain costs in this report have been converted using a fixed currency exchange rate of Cdn$1.00 to US$0.80. The expected accuracy range of the operating cost estimate is +25/-10%. A summary of the operating costs is presented in Table 21.7.
Seabridge Gold Inc. | 21-10 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Table 21.7 Operating Cost Summary
At the Nominal Feed
Rate of 130,000 t/d* |
LOM
Average (US$/t milled) |
||
(US$ M/a) | (US$/t milled) | ||
Mine | |||
Mining Costs – Mill Feed | 190.2 | 4.59 | 4.59 |
Open Pit – Mill Feed | - | 4.40 | 4.40 |
Block Caving – Mill Feed | - | 4.99 | 4.99 |
Mill | |||
Process | 251.1 | 5.29 | 5.34 |
G&A and Site Service | |||
G&A | 43.3 | 0.91 | 1.03 |
Site Service | 18.9 | 0.40 | 0.44 |
TMF and SWM | |||
TMF Dam Management | 6.1 | 0.13 | 0.13 |
Selenium Water Treatment | 9.4 | 0.20 | 0.21 |
HDS Water Treatment | 22.0 | 0.46 | 0.53 |
Mine Site Water Pumping | 2.5 | 0.05 | 0.06 |
Total Operating Cost | 543.5 | 12.03 | 12.33 |
Notes: *The nominal feed rate estimate excludes mine operating costs and is based on a mill feed rate of 130,000 t/d; the costs do not reflect higher unit costs late in the mine life when the mill feed rates are lower. Costs have been rounded to the nearest hundred thousands of dollars.
Figure 21.1 Operating Cost Distribution
Seabridge Gold Inc. | 21-11 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
The operating costs are defined as the direct operating costs including mining, processing, tailing storage, water treatment, and G&A. The hydropower credits from the recovered hydro-energy during mining operations are not accounted for in the operating cost estimate, but is included in the PFS financial analysis. Sustaining capital costs including all capital expenditures after process plant first production are excluded from the operating cost estimate.
Mining Personnel
Salaries for the supervisory and administrative job categories, and all hourly employee labour rates, are based on an industry-focused and location-specific labour survey conducted by Seabridge. Burdens are included in the salaries and labour rates. The payments include base salaries/labour rates, holiday and vacation pay, government prescriptive benefits (e.g., Canadian Pension Plan, workman compensation insurance, etc.), discretionary employer sponsored benefits, and tool allowance costs.
Labour factors in man-hours/equipment operating hours were estimated for operations and maintenance labour for each of the equipment types. Labour costs were calculated by multiplying the labour factor by the equipment operating hours, and labour costs were allocated to the equipment where labour had been assigned. The total hours required for each job type on all the equipment were added, and any additional labour required to complete a crew was assigned to an unallocated labour category.
Process Personnel
Salary/wage rates for management, technical support and operation are based on an industry-focused and location-specific labour survey conducted by Seabridge. Burdens are included in the salaries and labour rates. The payments include base salaries/labour rates, holiday and vacation pay, government prescriptive benefits (e.g., Canadian Pension Plan, workman compensation insurance, etc.), discretionary employer sponsored benefits, and tool allowance costs.
21.3.1 | Open Pit Mine Operating Costs |
Open pit mine operating costs, including operating and maintenance salaried staff and hourly labour, equipment major component and running repairs, fuel, power, and all other consumable goods, were derived from a combination of supplier quotes and historical data collected by MMTS. The quantities of consumables required were determined for each specific open pit mining activity from vendor input and in-house experience. Labour factors for operations and maintenance of the open pit mining equipment was also estimated based on vendor input and MMTS experience. These inputs were used to build up open pit mine operating costs from first principles.
Freight costs for all consumable goods and fuel are included in the estimate as part of the budgetary quotations.
Major component replacement for larger pieces of mobile equipment were calculated based on the expected life of the major component, the cost of the component, and the fleet size for that equipment. This puts large component repair costs into future years, giving a more representative LOM cash flow.
Seabridge Gold Inc. | 21-12 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
The cost of minor parts and running repairs were estimated as an hourly operating cost for the mining equipment.
GME is a category for open pit mine operations, mine maintenance, and technical services departmental overhead costs. It consists of costs for all salaried supervisory and technical staff, a consumable and rental allowance, crane rentals, and software and fleet management systems’ licensing and maintenance. This category is a fixed cost, and does not vary by production or fleet size, with the exception of ramp-ups to full staffing.
The distribution of unit cost by mining area is shown in Figure 21.2.
Figure 21.2 LOM Average Unit Operating Cost for Open Pit Mining (US$/t Material Mined)
21.3.2 | Underground Mining Operating Costs |
The underground mining operating cost estimates are based on first principles calculations and productivity modelling. The average daily production for each mine was used in the productivity model. The operating cost estimates include direct and indirect costs, which were estimated in a similar manner to direct and indirect capital costs. The indirect labour estimate was a combination of a factor based on the amount of mobile equipment operating for supervisor and maintenance staff, and experience at large, complex mines for technical staff. There are no contingencies added to the operating costs. Golder is responsible for the block cave operating cost estimates.
Seabridge Gold Inc. | 21-13 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Mitchell Block Cave Operating Costs
The average Mitchell block cave mine operating cost was estimated to be approximately US$4.88/t, which includes the cost of equipment and labour required to move material from the drawpoint to the surface conveyor portal, and the fixed costs to operate the LHDs, secondary breakers, crushers and conveyors,
Iron Cap Block Cave Operating Costs
The average Iron Cap block cave mine operating cost was estimated to be US$5.22/t, which includes the cost of equipment and labour required to move material from the drawpoint to the MTT train tunnel and the fixed costs to run the mine. This includes operating the LHDs, crushers, conveyors, mine services, and the labour required to plan and execute the mining plan. The dewatering cost is included in the fixed operating costs because the majority of the dewatering uses gravity and the cost per tonne is relatively low compared to Mitchell.
21.3.3 | Process Operating Costs |
Summary
The LOM average annual process operating costs for the different mineralizations were estimated as:
● | Mitchell and Iron Cap mineralization: US$249 million (US$5.25/t milled) |
● | Kerr mineralization: US$250 million (US$5.27/t milled) |
● | Sulphurets mineralization: US$273 million (US$5.75/t milled). |
The process operating costs for these mineralizations are based on a process rate of 130,000 t/d and 94% plant availability. The estimated average operating cost for the Sulphurets ore is higher than the ores from the other deposits, mainly due to harder mineralization for the Sulphurets ore, as compared to the other deposits. Due to the variations in operating costs for the different deposit ores, the average operating costs were estimated based on the ratio of the different ore tonnages processed and their individual operating costs.
The estimated process operating costs are summarized in Table 21.8 and Table 21.9, which include:
● | personnel requirements, including supervision, operation and maintenance; salary/wage levels based on an industry-focused and location-specific labour survey conducted by Seabridge, the payments include base salaries/labour rates and various burdens |
● | liner and grinding media consumption estimated from the Bond ball mill work index and abrasion index equations; maintenance supplies are based on approximately 6% of major equipment capital costs |
● | reagents based on metallurgical test results |
● | other operation consumables including laboratory, filtering cloth, and service vehicles consumables |
● | power consumption for the process plant |
● | no taxes or import duties are included in the process operating cost estimate, unless specified. |
Seabridge Gold Inc. | 21-14 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Table 21.8 Summary of Process Operating Costs by Deposit
Area | Mitchell and Iron Cap | Sulphurets | Kerr | ||||||
Personnel |
Annual Cost
(US$) |
Unit Cost
(US$/t milled) |
Personnel |
Annual Cost
(US$) |
Unit Cost
(US$/t milled) |
Personnel |
Annual
Cost
(US$) |
Unit Cost
(US$/t milled) |
|
Human Power | |||||||||
Operating Staff | 39 | 3,900,000 | 0.08 | 39 | 3,900,000 | 0.08 | 39 | 3,900,000 | 0.08 |
Operating Labour | 150 | 11,500,000 | 0.24 | 158 | 12,100,000 | 0.26 | 158 | 12,100,000 | 0.26 |
Maintenance | 84 | 6,900,000 | 0.15 | 84 | 6,900,000 | 0.15 | 84 | 6,900,000 | 0.15 |
Subtotal Human Power | 273 | 22,300,000 | 0.47 | 281 | 22,900,000 | 0.49 | 281 | 22,900,000 | 0.49 |
Major Consumables and Supplies | |||||||||
Major Consumables | |||||||||
Metal Consumables | 55,100,000 | 1.16 | 68,200,000 | 1.44 | 53,900,000 | 1.14 | |||
Reagent Consumables | 91,500,000 | 1.93 | 91,500,000 | 1.93 | 91,500,000 | 1.93 | |||
Supplies | |||||||||
Maintenance Supplies | 24,400,000 | 0.51 | 25,300,000 | 0.53 | 25,800,000 | 0.55 | |||
Operating Supplies | 2,700,000 | 0.06 | 2,700,000 | 0.06 | 2,700,000 | 0.06 | |||
Subtotal Consumable and Supplies | 173,700,000 | 3.66 | 187,700,000 | 3.96 | 173,900,000 | 3.67 | |||
Power Supply | 52,900,000 | 1.11 | 62,200,000 | 1.31 | 53,200,000 | 1.12 | |||
Subtotal Power | 52,900,000 | 1.11 | 62,200,000 | 1.31 | 53,200,000 | 1.12 | |||
Process Operating Cost Total | 273 | 248,900,000 | 5.24 | 281 | 272,800,000 | 5.75 | 281 | 250,000,000 | 5.27 |
Note: Costs have been rounded to the nearest hundreds of thousands of dollars. Unit costs have been rounded to the nearest hundredth. Totals may not add up due to rounding.
Seabridge Gold Inc. | 21-15 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Table 21.9 Operating Costs per Area of Operation by Deposit
Area | Mitchell and Iron Cap | Sulphurets | Kerr | ||||||
Personnel |
Annual Cost
(US$) |
Unit Cost
(US$/t milled) |
Personnel |
Annual Cost
(US$) |
Unit Cost
(US$/t milled) |
Personnel |
Annual Cost
(US$) |
Unit Cost
(US$/t milled) |
|
Crushing, Grinding and Copper Flotation Plant | 146 | 161,400,000 | 3.40 | 154 | 184,600,000 | 3.89 | 154 | 162,700,000 | 3.43 |
Tunnel Transport | 44 | 11,500,000 | 0.24 | 44 | 11,500,000 | 0.24 | 44 | 11,500,000 | 0.24 |
Molybdenum Flotation Plant | 8 | 5,900,000 | 0.12 | 8 | 5,900,000 | 0.12 | 8 | 5,900,000 | 0.12 |
Leach Plant | 43 | 33,700,000 | 0.71 | 43 | 34,500,000 | 0.73 | 43 | 33,600,000 | 0.71 |
Cyanide Solution/Residue Handling | 8 | 29,100,000 | 0.61 | 8 | 29,100,000 | 0.61 | 8 | 29,100,000 | 0.61 |
CIL Water Treatment | 4 | 1,500,000 | 0.03 | 4 | 1,500,000 | 0.03 | 4 | 1,500,000 | 0.03 |
Tailing Pumping/Reclaim Water | 20 | 5,800,000 | 0.12 | 20 | 5,800,000 | 0.12 | 20 | 5,800,000 | 0.12 |
Total | 273 | 248,900,000 | 5.25 | 281 | 272,900,000 | 5.75 | 281 | 250,100,000 | 5.27 |
Note: Costs have been rounded to the nearest hundreds of thousands of dollars. Unit costs have been rounded to the nearest hundredth. Totals may not add up due to rounding.
Seabridge Gold Inc. | 21-16 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
21.3.4 | TMF Dam Management Operating Costs |
On average, the operating costs for ongoing tailings dam construction by cycloning sand, including seepage water pumping costs, were estimated to be approximately US$6.1 million/a, or US$0.13/t milled.
21.3.5 | Mine Site Water Management Costs |
Overall SWM at the Mine Site includes HDS site water treatment, selenium removal treatment, and site water pumping. The average annual cost for Mine Site SWM was estimated to be approximately US$34.0 million/a, or US$0.72/t milled, at a mill feed rate of 130,000 t/d. The estimated average operating cost for the HDS WTP is approximately US$0.46/t milled, at a mill feed rate of 130,000 t/d, or US$0.31/m3 water, treated at an average flow rate of approximately 70 Mm3/a. The maintenance manpower will come from the overall mine site maintenance team. The major cost for HDS water treatment is reagent consumption at US$0.33/t milled. Power consumption was estimated to be approximately 40.3 GWh/a.
The estimated LOM average operating cost for the Selenium WTP is approximately US$0.20/t milled at a mill feed rate of 130,000 t/d, or US$1.02/m3 water, treated at an average flowrate of approximately 9.3 Mm3/a. The maintenance manpower will come from the overall site services maintenance team. The major cost for selenium water treatment is US$0.15/t milled for reagent consumption and maintenance. Power consumption was estimated to be approximately 11.8 GWh/a.
21.3.6 | General and Administrative |
G&A costs are costs that do not relate directly to mining or processing operating costs. These costs include:
● | personnel: executive management, staffing in accounting, supply chain and logistics, human resources, external affairs functions, and other G&A departments |
● | expenses : including insurance, off site offices, administrative supplies, medical services, legal services, human resource related expenses, travelling, community and environmental programs, accommodation/camp costs, air/bus crew transportation, regional and property taxes, and external assay/testing. |
The G&A costs were estimated at approximately US$43.3 million/a, or US$0.91/t milled at a nominal mill feed rate of 130,000 t/d, including approximately US$0.28/t for personnel and US$0.63/t for general expenses. The major costs are accommodation and crew air transportation, estimated at about US$15.6 million/a.
Seabridge Gold Inc. | 21-17 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
21.3.7 | Site Services |
The overall site service cost was estimated at US$0.40/t milled or approximately US$18.9 million/a. The estimate is based on requirements for this remote site in northern BC and on in-house experience. The estimate includes the following:
● | personnel: general site service human power |
● | site mobile equipment and light vehicle operations |
● | potable water and waste management |
● | general maintenance including yards, roads, fences, and building maintenance |
● | off site operation expense |
● | building heating |
● | power supply |
● | avalanche control. |
Seabridge Gold Inc. | 21-18 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
22.0 | Economic Analysis |
22.1 | Introduction |
Tetra Tech prepared an economic evaluation of the 2016 PFS based on a pre-tax financial model. For the 53-year LOM and 2.199 billion tonne Mineral Reserve, the following pre-tax financial parameters were calculated using the 2016 Base Case metal prices:
● | 10.4% IRR |
● | 6.0-year payback on US$5.005 billion initial capital |
● | US$3.263 billion NPV at a 5% discount rate. |
Seabridge engaged Lilburn in Denver, Colorado to prepare the tax component of the model for the post-tax economic evaluation for this 2016 PFS with the inclusion of applicable income and mining taxes, and they engaged PwC in Toronto, Ontario to review this work. PwC is an Ontario limited liability partnership, which is a member firm of PricewaterhouseCoopers International Limited, each member firm of which is a separate legal entity.
The following post-tax financial results were calculated:
● | 8.0% IRR |
● | 6.8-year payback on US$5.005 billion initial capital |
● | US$1.539 billion NPV at a 5% discount rate. |
The 2016 Base Case results apply the following key inputs:
● | gold – US$1,230/oz |
● | copper – US$2.75/lb |
● | silver – US$17.75/oz |
● | molybdenum – US$8.49/lb |
● | exchange rate – Cdn$1.00 to US$0.80. |
Sensitivity analyses, along with multiple additional metal price scenarios, were developed to evaluate the 2016 PFS economics.
Seabridge Gold Inc. | 22-1 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
22.2 | Forward-looking Statements |
The results of the economic analysis represent forward-looking information that is subject to a number of known and unknown risks, uncertainties and other factors that may cause actual results to differ materially from those presented here.
Forward-looking statements in the 2016 PFS include, but are not limited to, statements with respect to future metal prices and concentrate sales contracts, assumed currency exchange rates, the estimation of Mineral Reserves and Mineral Resources, the realization of Mineral Reserve estimates including the achievement of the dilution and recovery assumptions, the timing and amount of estimated future production, costs of production, capital expenditures, costs and timing of the development of ore zones, permitting time lines, requirements for additional capital, government regulation of mining operations, environmental risks, unanticipated reclamation expenses and title disputes.
Additional risk can come from actual results of reclamation activities; conclusions of economic evaluations; changes in parameters as mine and process plans continue to be refined, possible variations in ore reserves, grade or recovery rates; geotechnical considerations during mining; failure of plant, equipment or processes to operate as anticipated; shipping delays and regulations; accidents, labour disputes and other risks of the mining industry; and delays in obtaining governmental approvals.
22.3 | Pre-Tax Model |
Metal revenues projected in the 2016 PFS cash flow models are based on the average metal values indicated in Table 22.1.
Table 22.1 Metal Production from the KSM Mine
Years 1 to 7 | LOM | |
Total Tonnes to Mill (million) | 322.75 | 2,199 |
Annual Average Tonnes to Mill (million) | 46.11 | 41.48 |
Average Grades | ||
Gold (g/t) | 0.82 | 0.55 |
Copper (%) | 0.24 | 0.21 |
Silver (g/t) | 2.8 | 2.6 |
Molybdenum (ppm) | 48 | 43 |
Total Production | ||
Gold ('000 oz) | 6,529 | 28,597 |
Copper (million lb) | 1,435 | 8,270 |
Silver (million oz) | 18.22 | 114.67 |
Molybdenum ('000 lb) | 11,154 | 62,080 |
Average Annual Production | ||
Gold ('000 oz) | 933 | 540 |
Copper (million lb) | 204.9 | 156.1 |
Silver ('000 oz) | 2,603 | 2,164 |
Molybdenum ('000 lb) | 1,593 | 1,171 |
Seabridge Gold Inc. | 22-2 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
22.3.1 | Financial Evaluations: Npv and Irr |
The production schedule has been incorporated into the 100% equity pre-tax financial model to develop annual recovered metal production from the relationships of tonnage processed, head grades, and recoveries.
Metal revenues, principally gold and copper, were calculated based on each scenario's prices. Operating cost for mining, processing, site services, G&A, tailing storage and handling and water treatment, energy recovery areas as well as off-site charges (smelting, refining, transportation, and royalties) were deducted from the revenues to derive annual operating cash flow.
Initial and sustaining capital costs as well as closure and reclamation costs have been incorporated on an annual basis over the mine life and deducted from the operating cash flow to determine the net cash flow before taxes. Initial capital expenditures include costs accumulated prior to first production of concentrate, including all pre-production mining costs. Sustaining capital includes expenditures for mining and processing additions, replacement of equipment, and TMF expansions.
Initial and sustaining capital costs applied in the economic analysis are US$5.005 billion and US$5.503 billion, respectively. LOM Provincial Service Tax (PST) applicable to initial and sustaining capital is estimated to be US$134 million.
Financial evaluations account for physical reclamation costs at various times in the LOM, for the development of a fund to address water treatment costs post reclamation and for special use securities associated with permanent access roads.
Working capital is estimated at two months of receivables and one month of payables and varies from year to year. The working capital is recovered at the end of the mine life.
Pre-production construction period is estimated to be six years. NPV and IRR reported in this section are estimated at the start of this six-year period.
The pre-tax undiscounted annual cash flows are illustrated in Figure 22.1.
Seabridge Gold Inc. | 22-3 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 22.1 Pre-tax Undiscounted Annual and Cumulative Cash Flow
Source: Tetra Tech, 2016
22.3.2 | Metal Price Scenarios |
The 2016 Base Case uses the three-year average metal prices as of July 2016 and a US$/Cdn$ exchange rate of 0.80. In addition to the 2016 Base Case, three metal price/exchange rate scenarios were also developed: the first uses the metal prices and exchange rate used in mine optimization and design (2016 Design Case); the second uses the spot metal prices and closing exchange rate on July 1, 2016 (2016 Spot Case); and the third uses higher metal prices to indicate upside potential (2016 Alternate Case). The input parameters and pre-tax results of all scenarios are shown in Table 22.2.
Table 22.2 Summary of the Pre-tax Economic Evaluations
Unit |
2016
Base Case |
2016
Design Case |
2016
Spot Case |
2016
Alternate Case |
|
Gold | US$/oz | 1,230.00 | 1,200.00 | 1,350.00 | 1,500.00 |
Copper | US$/lb | 2.75 | 2.70 | 2.20 | 3.00 |
Silver | US$/oz | 17.75 | 17.50 | 20.00 | 25.00 |
Molybdenum | US$/lb | 8.49 | 9.70 | 7.00 | 10.00 |
Exchange Rate | US$:Cdn$ | 0.80 | 0.83 | 0.77 | 0.80 |
Undiscounted NCF | US$ million | 15,933 | 13,727 | 16,101 | 26,319 |
NPV (at 3%) | US$ million | 6,217 | 5,128 | 6,461 | 11,138 |
NPV (at 5%) | US$ million | 3,263 | 2,510 | 3,507 | 6,541 |
NPV (at 8%) | US$ million | 960 | 475 | 1,175 | 2,928 |
table continues… |
Seabridge Gold Inc. | 22-4 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Note: Net cash flow (NCF)
22.4 | Sensitivity Analysis |
Tetra Tech investigated the sensitivity of NPV, IRR and payback period to the key variables. Using the 2016 Base Case as a reference, each of key variables was changed between -30% and +30% in 10% increments while holding the other variables constant.
Sensitivity analyses were carried out on the following key variables:
● | gold, copper, silver, and molybdenum metal prices |
● | exchange rate |
● | capital costs |
● | operating costs. |
The analyses are presented graphically as financial outcomes in terms of pre-tax NPV, IRR, and payback period. The NPV is most sensitive to gold price and exchange rate, followed by operating costs, copper price and capital costs. The IRR is most sensitive to exchange rate, capital costs and gold price, followed by operating costs and copper price. In general, sensitivity to metal price is roughly equivalent to sensitivity to metal grade. The payback period is most sensitive to gold price and exchange rate, followed by capital costs, copper price and operating costs. Since the majority of costs are in Canadian currency and the economic analysis is developed in United States of America currency, a significant increase in the exchange rate by 30% will result in a significant increase in the costs when converted to US dollars and this leads to a sharp increase in the payback period. Also, when gold price decreases by 30%, the revenue side decreases significantly and this results in sharp increase in the payback period. Financial outcomes are relatively insensitive to silver and molybdenum prices. The NPV, IRR, and payback sensitivities are shown in Figure 22.2, Figure 22.3, and Figure 22.4.
Seabridge Gold Inc. | 22-5 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 22.2 Sensitivity Analysis of Pre-tax NPV at a 5% Discount Rate
Source: Tetra Tech, 2016
Figure 22.3 Sensitivity Analysis of Pre-tax IRR
Source: Tetra Tech, 2016
Seabridge Gold Inc. | 22-6 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Figure 22.4 Sensitivity Analysis of Pre-tax Payback Period
Source: Tetra Tech, 2016
22.5 | Post-tax Financial Evaluations |
Seabridge engaged Lilburn in Denver, Colorado to prepare the tax component of the model for the post-tax economic evaluation for this 2016 PFS with the inclusion of applicable income and mining taxes. Seabridge also engaged PwC in Toronto, Ontario to review the tax component of the model prepared by Lilburn.
The following general tax regime was recognized as applicable in Q3 2016:
22.5.1 | Canadian Federal and BC Provincial Income Tax Regime |
The federal and BC provincial income taxes are calculated using the currently enacted corporate rates of 15% for federal and 11% for BC.
For both federal and provincial income tax purposes, capital expenditures are accumulated in tax pools that can be deducted against mine income at different prescribed rates, depending on the type of capital expenditures.
Historically, pre-production mining expenditures are accumulated in the Canadian Exploration Expense (CEE) pool. The CEE pool is generally amortized at 100%, to the extent of taxable income from the mine. A phase-out rule was enacted in 2013 to phase out the treatment of pre-production mine development expenses as CEE to Canadian Development Expense (CDE) from 2015 to 2017. Effective 2017, all the pre-production mine development expenses are treated as CDE.
In addition to pre-production mine development expenses (that are reclassified as CDE due to the phase-out rule), Canadian resource property acquisition costs and the costs of mine shafts, main haulage ways, and other underground workings are considered CDE and are accumulated in the CDE pool. The KSM Financial Model for the 2016 PFS treats all such expenses as CDE.
Seabridge Gold Inc. | 22-7 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Fixed assets acquired for the mine are accumulated in an undepreciated capital cost pool (Class 41) and are generally amortized at 25% on a declining balance basis. Certain fixed assets (acquired after March 20, 2013 and before 2021) may qualify to be accumulated in a Class 41.1 pool that can be amortized at an accelerated rate of up to 100%. However, as a substantive portion of the fixed assets are expected to be acquired post-2020 (after the phase out of the Class 41.1 pool), the KSM Financial Model assumes that the accelerated depreciation will not be available.
The KSM Mine is expected to incur costs related to the NTL as described in Section 21.2.6. These sustaining capital costs are expected to be incurred on a property that is not owned by the mine, the costs associated with the NTL should be treated as eligible capital expenditures for income tax purposes. Effective January 1, 2017, eligible capital expenditures are treated as a Class 14.1 asset with an amortization rate of 5%. The KSM Financial Model treats all the costs associated with the NTL overrun as a Class 14.1 asset.
22.5.2 | Bc Mineral Tax Regime |
The BC Mineral Tax regime is a two tier tax regime, with a 2% tax and a 13% tax.
The 2% tax is assessed on "net current proceeds", which is defined as gross revenue from the mine less mine operating expenditures. Hedging income and losses, royalties and financing costs are excluded from operating expenditures. The 2% tax is accumulated in a Cumulative Tax Credit Account (CTCA) and is fully creditable against the 13% tax.
All capital expenditures, both mine development costs and fixed asset purchases, and mine operating expenditures are accumulated in the Cumulative Expenditures Account, which is amortized at 100% against the 13% tax.
The 13% tax is assessed on "net revenue", which is defined as gross revenue from the mine less any accumulated Cumulative Expenditures Account balance to the extent of the gross revenue from the mine for the year.
A "new mine allowance" is available in respect of new mine or capital costs incurred in connection with expansion of an existing mine commencing production with reasonable commercial quantities. Generally, this allowance provides that 133% of capital expenditures incurred prior to commencement of production may be used to offset net revenue for BC mining tax purposes. Under current legislation, the provision for the new mine allowance expired on January 1, 2020.
A notional interest of 125% of the prevailing federal bank rate is calculated annually on any unused Cumulative Expenditures Account and CTCA and is added to the respective balances.
BC Mineral Tax is deductible for federal and provincial income tax purposes.
Seabridge Gold Inc. | 22-8 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
22.5.3 | Taxes and Post-tax Financial Results |
At the 2016 Base Case long-term metal prices and exchange rate used for this study, total estimated taxes payable on KSM profits are US$5.951 billion over the 53-year LOM. The total estimated taxes payable by the mine in all scenarios provided are shown in Table 22.3.
Table 22.3 Component of the Various Taxes for all Scenarios
Unit |
2016
Base Case |
2016
Design Case |
2016
Spot Case |
2016
Alternate Case |
|
Gold | US$/oz | 1230.00 | 1200.00 | 1350.00 | 1500.00 |
Copper | US$/lb | 2.75 | 2.70 | 2.20 | 3.00 |
Silver | US$/oz | 17.75 | 17.50 | 20.00 | 25.00 |
Molybdenum | US$/lb | 8.49 | 9.70 | 7.00 | 10.00 |
Exchange Rate | US$:Cdn$ | 0.80 | 0.83 | 0.77 | 0.80 |
Corporate Tax (Federal) | US$ million | 2,229 | 1,953 | 2,242 | 3,562 |
Corporate Tax (Provincial) | US$ million | 1,635 | 1,433 | 1,644 | 2,612 |
BC Mineral Tax | US$ million | 2,087 | 1,804 | 2,106 | 3,424 |
Total Taxes* | US$ million | 5,951 | 5,190 | 5,993 | 9,598 |
*Totals may not add up due to rounding.
Post-tax financial results are summarized in Table 22.4.
Table 22.4 Summary of Post-tax Financial Results
Unit |
2016
Base Case |
2016
Design Case |
2016
Spot Case |
2016
Alternate Case |
|
Gold | US$/oz | 1230.00 | 1200.00 | 1350.00 | 1500.00 |
Copper | US$/lb | 2.75 | 2.70 | 2.20 | 3.00 |
Silver | US$/oz | 17.75 | 17.50 | 20.00 | 25.00 |
Molybdenum | US$/lb | 8.49 | 9.70 | 7.00 | 10.00 |
Exchange Rate | US$:Cdn$ | 0.80 | 0.83 | 0.77 | 0.80 |
Undiscounted NCF | US$ million | 9,983 | 8,537 | 10,109 | 16,721 |
NPV (at 3%) | US$ million | 3,513 | 2,789 | 3,691 | 6,696 |
NPV (at 5%) | US$ million | 1,539 | 1,028 | 1,718 | 3,663 |
NPV (at 8%) | US$ million | -2 | -343 | 161 | 1,282 |
IRR | % | 8.0 | 7.0 | 8.5 | 11.4 |
Payback | years | 6.8 | 7.4 | 6.4 | 4.9 |
Table 22.5 summarizes the 2016 PFS annual cash flow for the pre-production period, Years 1 to 7, and the LOM, providing mine and mill production, revenue projections, operating costs and capital costs, and undiscounted cash flows both before and after taxes.
Seabridge Gold Inc. | 22-9 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Table 22.5 2016 PFS Annual Cash Flow for Pre-production Period, Years 1 to 7 and LOM
Unit |
Pre-prod.
Period |
Production Periods | ||||||||
Years -6
to -1 |
Year
1 |
Year
2 |
Year
3 |
Years
4 |
Years
5 |
Year
6 |
Year
7 |
LOM | ||
Mine and Mill Production | ||||||||||
Waste Mined | Mt | 90 | 141 | 136 | 40 | 84 | 129 | 130 | 111 | 3,003 |
Mill Feed Processed | Mt | - | 38 | 47 | 47 | 47 | 47 | 47 | 47 | 2,198 |
Grade | ||||||||||
Gold | g/t | - | 0.72 | 0.82 | 0.96 | 0.98 | 0.71 | 0.72 | 0.82 | 0.55 |
Copper | % | - | 0.25 | 0.28 | 0.30 | 0.27 | 0.18 | 0.18 | 0.21 | 0.21 |
Silver | g/t | - | 2.5 | 2.0 | 2.3 | 4.5 | 2.4 | 2.2 | 3.4 | 2.6 |
Molybdenum | ppm | - | 30 | 47 | 61 | 20 | 56 | 65 | 56 | 43 |
Metal Recovered | ||||||||||
Gold | Moz | - | 0.7 | 0.9 | 1.1 | 1.2 | 0.8 | 0.8 | 1.0 | 28.6 |
Copper | Mlb | - | 175.3 | 251.6 | 273.2 | 243.2 | 155.0 | 154.6 | 181.6 | 8,270.4 |
Silver | Moz | - | 1.9 | 1.9 | 2.1 | 4.9 | 2.0 | 1.9 | 3.4 | 114.7 |
Molybdenum | Mlb | - | 0.6 | 1.5 | 2.6 | 0.0 | 2.0 | 2.4 | 2.0 | 62.1 |
Gross Revenue | ||||||||||
Gold Revenues | US$ million | - | 810 | 1,167 | 1,385 | 1,448 | 1,015 | 1,019 | 1,187 | 35,174 |
Copper | US$ million | - | 482 | 692 | 751 | 669 | 426 | 425 | 500 | 22,744 |
Silver | US$ million | - | 35 | 34 | 38 | 87 | 36 | 34 | 60 | 2,035 |
Molybdenum | US$ million | - | 5 | 13 | 22 | - | 17 | 20 | 17 | 527 |
Gross Revenue | US$ million | - | 1,332 | 1,906 | 2,196 | 2,204 | 1,495 | 1,498 | 1,763 | 60,480 |
Total On-site and Off-site Operating Costs | US$ million | - | 662 | 774 | 739 | 745 | 692 | 753 | 775 | 33,216 |
Operating Cash Flow | US$ million | - | 670 | 1,132 | 1,457 | 1,459 | 804 | 746 | 987 | 27,264 |
Total Capital Costs | US$ million | 5,005 | 623 | 133 | 98 | 127 | 34 | 88 | 75 | 10,508 |
PST | US$ million | 64 | 6 | 1 | 1 | 2 | 2 | 1 | 0 | 134 |
Reclamation- Water Treatment Fund and SUP Costs | US$ million | 8 | 52 | - | - | - | - | - | - | 688 |
Pre-tax Undiscounted NCF | US$ million | (- 5,077) | (- 11) | 998 | 1,358 | 1,331 | 767 | 657 | 912 | 15,933 |
Corporate Tax (Provincial) | US$ million | - | - | - | - | 92 | 38 | 51 | 88 | 1,635 |
Corporate Tax (Federal) | US$ million | - | - | - | - | 126 | 51 | 69 | 120 | 2,229 |
BC Mineral Tax | US$ million | - | 14 | 24 | 31 | 31 | 17 | 17 | 22 | 2,087 |
Total Taxes | US$ million | - | 14 | 24 | 31 | 249 | 105 | 137 | 230 | 5,951 |
Post-tax Undiscounted NCF | US$ million | (- 5,077) | (- 25) | 974 | 1,327 | 1,082 | 662 | 521 | 682 | 9,983 |
Seabridge Gold Inc. | 22-10 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
22.6 | Royalties |
No royalties are included in the KSM financial models. KSM is subject to a royalty of 1% of the NSR payable to Newmont, capped at US$3.6 million, with a predetermined buyout option. The full amount of the buyout option is paid in Year 1 in the financial model.
22.7 | Smelter Terms |
The copper concentrate smelter terms and molybdenum concentrate smelter charges that have been applied in the economic analysis are presented in Section 19.1 and 19.2 of this report, respectively.
Gold and silver doré will generally include payment terms as follows:
● | Gold: pay 99.8% of content less a refining charge of US$1.00/accountable oz. |
● | Silver: pay 90.0% of content less a refining charge of US$1.00/accountable oz. |
22.8 | Miscellaneous Costs and Charges |
An assumption is being made that the customer base will be in Asia. The copper concentrate will be shipped in bulk via port facilities in Stewart, BC, and the molybdenum concentrate will be packed in concentrate bags and shipped inside sea containers via port facilities in Prince Rupert, BC. Transportation costs for the copper and molybdenum concentrate are listed below:
● | Copper concentrate: |
o | trucking: US$38.06/wmt |
o | port storage and handling: US$14.40/wmt |
o | ocean transport to Asian port: US$26.00/wmt |
o | moisture content: 9%. |
● | Molybdenum concentrate: |
o | trucking: US$73.20/wmt |
o | port storage and handling: US$12.20/wmt |
o | ocean transport to Asian port: US$88.93/wmt |
o | moisture content: 5%. |
Gold and silver doré transportation cost is assumed to be US$1.00/oz.
An insurance rate of 0.125% was applied to the provisional invoice value of the concentrates and doré to cover land-based and ocean transport from the mine site to the smelter.
A US$8.50/dmt charge was applied for marketing and services provided by the Owner’s representative. Duties would include attendance during vessel unloading at the smelter port, supervising the taking of samples for assaying, and determining moisture content.
An overall weight loss of 0.1% was applied in the economic analysis.
Seabridge Gold Inc. | 22-11 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
23.0 | Adjacent Properties |
In 2010, Pretium purchased the Snowfield and Brucejack mineral resource properties from Silver Standard Resources, Inc. In February 2011, Pretium announced an updated estimate of Mineral Resources for their Snowfield project, which abuts against the east side of Seabridge's Mitchell deposit. Table 23.1 summarizes the publicly disclosed resources of the Snowfield project, which were tabulated using a 0.30 g/t gold equivalent cut-off grade (Pretium 2011).
The QP responsible for this section of this Technical Report has not verified the Mineral Resources that were disclosed by Pretium for their Snowfield deposit. While there appears to be similarities between the Mitchell and Snowfield deposits, the Brucejack mineralization reported by Pretium is not necessarily indicative of mineralization found at the nearby Kerr, Sulphurets, Mitchell, or Iron Cap zones.
Pretium has disclosed the updated Mineral Resources and Mineral Reserves with an effective date of January 1st, 2019 for their Brucejack project (Pretium Annual Information Form for the year end December 31, 2019). The Brucejack is a high-grade underground gold and silver deposit that is located approximately 5 km east of Seabridge's Kerr deposit. The mine is currently being operated at 3,800 tpd with an expected mine life of 14 years.
The QP responsible for this section of this Technical Report has not verified the publicly disclosed Mineral Resources and Mineral Reserves associated with the Brucejack project. Furthermore, the QP does not believe that the Brucejack mineralization is necessarily indicative of the mineralization associated with the various mineralized zones at the Property.
Table 23.1 Pretium Snowfield Mineral Resources Using a 0.30 g/t Cut-off
Resource
Category |
Tonnes
(Mt) |
Au
(g/t) |
Ag
(g/t) |
Cu
(%) |
Mo
(ppm) |
Re
(ppm) |
Au
(000 oz) |
Ag
(000 oz) |
Cu
(Blb) |
Mo
(Mlb) |
Re
(Moz) |
Measured | 189.8 | 0.82 | 1.69 | 0.09 | 97.4 | 0.57 | 4,983 | 10,332 | 0.38 | 40.8 | 3.5 |
Indicated | 1,180.3 | 0.55 | 1.73 | 0.10 | 83.6 | 0.50 | 20,934 | 65,444 | 2.60 | 217.5 | 19.0 |
Measured + Indicated | 1,370.1 | 0.59 | 1.72 | 0.10 | 85.5 | 0.51 | 25,917 | 75,776 | 2.98 | 258.3 | 22.5 |
Inferred | 833.2 | 0.34 | 1.90 | 0.06 | 69.5 | 0.43 | 9,029 | 50,964 | 1.10 | 127.7 | 11.5 |
Source: Pretium website (http://www.pretivm.com)
Seabridge Gold Inc. | 23-1 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
24.0 | Other Relevant Data and Information |
There is no other relevant data or information to complete this report.
Seabridge Gold Inc. | 24-1 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
25.0 | Interpretations and Conclusions |
25.1 | Introduction |
The Qualified Persons (QPs) of this Report have verified that the 2016 PFS remains current.
KSM received its EA approvals from both the provincial and federal governments in July and December of 2014, respectively, including numerous provincial permits covering the first years of construction. Those reviews and subsequent decisions concluded that KSM would not result in significant adverse effects to the environment, identifying KSM as a responsible mine development.
The Mineral Resources were constrained within the various KSM mineralized zones using open pit shells and block cave shapes to establish reasonable prospects for eventual economic extraction as outlined in the CIM Definition Standards for Mineral Resources and Mineral Reserves (CIM, 2014). Details of the Mineral Resources are presented in Section 14.0.
The 2016 PFS maintains the alternative of KSM as a large-tonnage open pit and underground block cave mining operation, at a nominal rate of 130,000 t/d of ore fed to the processing plant capable of producing a copper/gold/silver concentrate for transport by truck to the nearby deep-water sea port at Stewart, BC. A gold-silver doré, and a separate molybdenum concentrate, will also be produced at the processing facility.
25.2 | 2016 Prefeasibility Study Conclusions |
25.2.1 | 2016 PFS Data Verification |
The QPs for the 2016 PFS concluded that the Mineral Reserves would not materially change if the mine plans were updated using the December 2019 Mineral Resource estimates, Q4 2019 capital and operating costs, and 2020 metal prices and metallurgical recoveries. Therefore the 2016 PFS Mineral Reserves are verified as being current and are suitable to be used unchanged in the 2016 PFS that is to be included in the 2020 Technical Report on the KSM Property.
The QPs verified that if the mine capital and operating cost estimates, metal prices and exchange rates were updated, any changes would not cause a material difference in the outcomes of the pre-tax and post-tax economic analyses of the 2016 PFS on the KSM property. Therefore the 2016 PFS pre-tax and post-tax economic analyses are considered current and suitable to be used unchanged in the 2020 Technical Report.
Seabridge Gold Inc. | 25-1 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
25.2.2 | Mineral Reserves |
From the section above, the stated reserves have not been changed from the 2016 PFS Technical Report even though there have been changes to the Mineral Resource model described in Section 14.0. Mineral Reserves are based on NSR values that were calculated in the block model using US$1,200.00/oz of gold, US$2.70/lb of copper, US$17.50/oz of silver, US$9.70/lb of molybdenum and a foreign exchange rate of US$0.83 per Cdn$1.00, with varying process recoveries for the different mining areas, and applicable off-site charges. The NSR values were used as a dynamic cut-off grade for defining ore and waste in the open pit, with a minimum of Cdn$9.00/t. Mining loss and dilution parameters for the open pits and underground mine plans are applied as described in Section 15.0. The estimated Proven and Probable Mineral Reserves as of July 31, 2016 are 38.8 Moz of gold and 10.2 Blb of copper (2.2 Bt at an average grade of 0.55 g/t gold, 0.21% copper, 2.6 g/t silver and 42.6 ppm molybdenum per tonne).
The methods used in this estimate comply with CIM Definition Standards, with reasonable engineering practices for a PFS-level study, and economic estimates based on the technical and economic parameters stated in this Report.
25.2.3 | Mining Methods |
25.2.3.1 Open Pit Mining
The open pit mine plan in the 2016 PFS establishes the economic mining limits of the Mitchell, Sulphurets, and Kerr Mineral Resource areas using large-tonnage mining methods capable of providing mill feed at a nominal rate of 130,000 t/d when the open pit is supplying all ore. The LOM plan accommodates the local adverse conditions comprising snow, cold, remoteness, and steep terrain. Waste and water management designs are incorporated into the mine plan, as specified in the current site plans, as reviewed and approved in the Application/EIS (Rescan 2013) review process completed in 2014.
The chosen mine equipment is well known and suitable for the expected operating conditions, and the productivity assumptions are reasonable and achievable. The resultant unit mining costs are comparable when benchmarked against other similar operating mines when considering the site operating conditions. Given the stated design parameters and assumptions, the open pit mine plan would achieve the forecast production schedule and the annual levels and costs within the expected range of accuracy of the 2016 PFS estimate.
25.2.3.2 Underground Mining
The 2016 PFS underground block cave mining plans for the Mitchell deposit, beneath the previously mined Mitchell open pit, and for the Iron Cap deposit were developed from assessments of the economic shut-off at the drawpoints using GEOVIA’s PCBC™ software. These assessments incorporate dilution associated with sub-economic and waste rock that mixes with the mineralized rock above shut-off value as it is drawn down and mucked at the drawpoint. The GEOVIA PCBC™ assessments were based on industry standard approaches of developing production and grade schedules, and incorporated benchmarked production controls for ramp-up rates, maximum draw rates, and drawpoint construction rates. The size of the block cave footprints on the production levels at Mitchell and Iron Cap are much larger than the minimum estimated area required to initiate and propagate the cave to surface, and so there are no concerns about these deposits caving.
Seabridge Gold Inc. | 25-2 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
The drawpoint layout and spacing were based on estimates of fragmentation and cave mining experience in maintaining favourable interaction between adjacent draw columns that control premature reporting of waste dilution at the drawpoints. The chosen mucking equipment, the haulage distances from drawpoints to ore passes, the handing of oversize muck by secondary blasting, and the design of the ore passes and grizzly system allow for production rates of 55,000 t/d at Mitchell and 40,000 t/d at Iron Cap. The production ramp-up periods for these operations are six years and four years, respectively, which are within the ranges that have been achieved at other block cave operations. Production from Mitchell, and subsequently from Iron Cap, allow the total KSM production to be maintained at 130,000 t/d through Year 35 as production from the open pits decrease. Production from underground then dominates mill feed for the final third of the LOM.
Based on the various factors discussed above, the block cave mine plan is expected to achieve the forecasted production schedule and the annual levels and costs within the expected range of accuracy of the 2016 PFS estimate.
25.2.4 | Recovery Methods |
Several wide-ranging metallurgical test programs have been conducted since 2007 to assess the metallurgical responses of the mineral samples from the KSM deposits, especially the samples from the Mitchell deposit. The test results indicate that the mineral samples from the four separate mineralized deposits are amenable to the flotation-cyanidation combined process.
The 2016 PFS processing plant is designed based on the flowsheet developed from the testwork results. The proposed flotation process is projected to produce a copper-gold concentrate containing approximately 25% copper. Copper and gold flotation recoveries will vary with changes in head grade and mineralogy. The average copper and gold recoveries to the concentrate are projected to be 81.6% and 55.3%, respectively, for the LOM mill feed containing 0.55 g/t gold and 0.21% copper. As projected from the testwork, the cyanidation circuit will increase the overall gold recovery to a range of 60 to 79%, depending on gold and copper head grades. Silver recovery from the flotation and leaching circuits is expected to be 62.7% on average. A separate flotation circuit will recover molybdenite from the copper-gold-molybdenum bulk concentrate when higher-grade molybdenite mineralization is processed.
The process flowsheet proposed for KSM is conventional and has been widely used in processing porphyry copper-gold ores. The equipment type and sizing selected for KSM are common in other mining projects.
In general, the copper and molybdenum concentrates produced are anticipated to be acceptable by most of the copper and molybdenum smelters. On average, the impurity contents in the copper and molybdenum concentrates should be lower than the penalty thresholds set by most of the smelters.
Seabridge Gold Inc. | 25-3 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
25.2.5 | Project Infrastructure |
25.2.5.1 MTT Transportation System
In the 2016 PFS, transportation of ore, freight, and personnel through the MTT will be achievable with a two tunnel automated train transport system, at an average rate of 130,000 t/d and a peak capacity of 10,000 t/h. The required deliveries of freight, including bulk transport of fuel and lime, mine site consumables, as well as personnel movement for periodic crew changes and daily requirements between the Mitchell OPC and Treaty OPC are also achievable using the tunnel and rail infrastructure with appropriate traffic control management systems.
The system is scalable and flexible, as it has the ability to add or remove train sets to meet higher or lower throughput requirements, and components can be taken out of operation for maintenance without compromising total system operation.
This scale of underground tunnel transport via trains has proven effective in other mines globally, utilizing equipment and infrastructure specified within the 2016 PFS. The planned train system operations can be reasonably accomplished at the 2016 PFS’s estimated productivities and costs.
25.2.5.2 Tunnelling
For 2016 PFS, the conventional drill and blast methodology for excavating infrastructure and water tunnels is a valid basis for the scheduling and costing of the long tunnels required in this PFS. Using a twinned tunnel for the MTT provides advantages in construction with three sets of advancing twin headings, enabling the use of one tunnel at each heading as a fresh airway, and the other tunnel as a return airway, which has a significant impact on ventilation and advance rates for long tunnels. Other infrastructure and water tunnels would be excavated with a single advancing heading from each portal, a well proven method in the mining industry.
Advance rates and excavation costs for the MTT have been determined by two contractors using detailed cycle time calculations for the varying ground conditions. The contractor-developed advance rates and costs have been adapted for the other tunnel excavations. The contractor’s estimates have also been benchmarked, indicating the estimates are within the accuracy of the 2016 PFS. The License of Occupation for the MTT route was issued by the BC Government in September 2014.
25.2.5.3 Infrastructure Dams
Tailings Management Facility
In 2016 PFS, the TMF will be a conventional storage facility with three main cells, using a starter dam construction with ongoing centerline dam raises using cyclone sand. The TMF layout and sequencing allows for staged construction of the facility, which optimizes both start-up and operating costs, while managing geotechnical and environmental risks. Using a three-cell system provides advantages for storage of CIL tailings, and allows progressive, staged development followed by closure of the facility to mitigate environmental and closure risks. The cell system reduces TMF discharge of excess water and also allows for progressive development of water management facilities.
Seabridge Gold Inc. | 25-4 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
A Best Available Tailings Technology (BATT) assessment (KCB, 2016a), completed at the same time as the 2016 PFS, shows that the current TMF design is the most appropriate to meet environmental, operability, and geotechnical criteria. Dry stack options were either not the most appropriate or did not meet these criteria.
Key conclusions include:
● | TMF starter dams safely store 18 to 24 months of tailings under the range of start-up assumptions assessed as established by the TMF design criteria. The storage plan allows for operational flexibility during start up, with a minimum of one winter season and potentially two winter seasons accommodated |
● | TMF dam designs (from starter dams through closure) are stable under static and pseudo-static conditions, as designed, and these designs meet all applicable regulatory criteria. |
Water Storage Facility
The WSF provides environmental containment of runoff water for the mine site. The facility includes a rock fill-asphalt core WSD to retain contact water collected from the mine site for treatment at the HDS WTP. The facility is capable of storing inflows from extreme events and is designed to minimize seepage. The WSD will be built to full height before start-up to provide 50 Mm3 of storage for a 200-year wet year runoff from the mine site catchments. Key conclusions include:
● | the rock fill-asphalt core WSD design is confirmed to be the preferred structure type to meet the KSM environmental, durability, and geotechnical design criteria. A value engineering study (KCB, 2012d) showed that this design has both low-seepage rates, as well as constructability and cost advantages over other types of dam structures analyzed for this location and purpose |
● | in 2016, a dam construction contractor provided improved reliability estimates of structure cost and construction schedule duration for completion of the WSD. |
25.2.6 | Economic Analysis |
Tetra Tech prepared an economic evaluation for the 2016 PFS based on a pre-tax financial model. The tax component of the model was prepared and reviewed by other consultants (please see Section 22.0 for further details). Based on this tax analysis, Tetra Tech prepared the post-tax economic evaluation of the 2016 PFS.
For the 53-year LOM and 2.198 Bt Mineral Reserve, Table 25.1 summarizes the economic analysis results presented in Section 22.3 and 22.5.
Seabridge Gold Inc. | 25-5 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Based on the economic results of Table 25.1, it can be concluded that the 2016 PFS:
● | has a short payback period compared to the long mine life |
● | has low cash and total costs per ounce of gold produced net of by-product credits |
● | costs include capital cost commitments resulting from the EA review process and thus represent a realistic cost basis moving forward as compared to those projects which have yet to complete an environmental review |
● | closure costs including long term water treatment costs are included in the economic evaluation |
● | based on study results herein, is considered economically viable, and thus merits additional study in the next design phase. |
Table 25.1 Summary of Major Pre- and Post-tax Results by Metal Price Scenario | ||
Notes: |
Operating and total costs per ounce of gold are after
base metal credits.
Total costs per ounce include all start-up capital, sustaining capital, and reclamation/closure costs. |
Seabridge Gold Inc. | 25-6 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
25.3 | 2016 Prefeasibility Study Risks |
There are risks that could affect the economic viability of the KSM mine development. Many of these risks are based on the current extent of sufficiently detailed information and engineering in specific project areas. These risks can be further managed as more drilling, sampling, testing, design, and engineering are completed in the next study stage.
However, several risks have been reduced through activities completed by Seabridge and its team since 2012. Specifically, the permitting risk has been addressed substantially with the receipt of environmental approvals granted by both the federal and provincial governments in 2014, and the granting of the early-stage construction permits for KSM, including the MTT License of Occupation. It can be effectively stated that Seabridge earned “the social license” for KSM through the successful completion of the environmental review process with the support of the nearby communities through the submission of letters of support and indigenous groups support. On June 17, 2014, Seabridge Gold entered into a comprehensive Benefits Agreement with the Nisga’a Nation in respect of the KSM Property. On June 10, 2019, the Tahltan Nation and Seabridge Gold Inc. announced that the parties reached agreement on the terms of a Co-operation and Benefits Agreement in connection with KSM.
One of the significant unknowns associated with KSM is related to the extent of available geotechnical data for the tunnels. Since several tunnels are on the critical path for construction, potential delays in construction could occur if unforeseen rock mass conditions or groundwater inflows are encountered that cause durations in excess of those anticipated in the preliminary construction schedule.
These risks are common to most mining projects, many of which can be mitigated with adequate engineering, planning, and pro-active management. Some external risks, such as metal prices, exchange rates, and government legislation are beyond the control of the developer and operator and are difficult to anticipate and mitigate, although in some instances measures for risk reduction have already been included in conservative design such as in selection of economic mining limits. Risk reduction measures are also included in tunnel and access road design, and through the inclusion of early scheduling for items potentially subject to risk of delay. The means to address risk for a project the size of KSM moving forward is to establish a formal risk management program during advanced study phases that continues through development and into mine operation. The KSM project team will systematically review risks and opportunities during project development and construction, and take appropriate action to minimize the impact on overall costs and scheduling.
25.3.1 | Open Pit Mining |
The Mitchell pit is a very large open pit with exceptional slope heights. The Sulphurets and Kerr pits have slope heights typical of other open pit metal mines in BC and other parts of the world. The main mining risks for the open pits relate to slope stability, safety, and production delays. Throughout the planning, design, and engineering of the open pits, the KSM project team has identified hazards and developed mitigation plans to reduce and manage risks related to the open pit slopes. Previous studies included a comprehensive risk analysis of the open pit mine design and operating issues. Geotechnical and hydrogeological drilling and test work, geohazard studies, and weather and snow studies have been completed. The results of these have been incorporated into the mine designs for the 2016 PFS.
Seabridge Gold Inc. | 25-7 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
The following issues were considered in the 2016 PFS:
● | slope deformation or rock falls from unstable slopes requiring restricted access to the pit, slope rehabilitation, and lost or reduced mine production. These risks are mitigated via geotechnical design and assessment prior to mining, a comprehensive slope monitoring and management plan during mining, the addition of extra-wide benches at regular 150 m intervals in the pit slope configurations, and standard operating procedures that include good wall control practices and mine operations planning |
● | snow avalanches at the pit crests resulting in restricted access to the pit. These risks are mitigated via an avalanche management plan coordinated with mine operations |
● | visibility or weather shutdowns resulting in reduced productivity in the open pits. These risks are mitigated via snow handling crews and equipment, planned lost days and the use of ore stockpiles |
● | slope depressurization to reduce high pore water pressures in the pit slopes that might result in pit slope instability. These risks are mitigated by an extensive slope depressurization plan that includes vertical wells, horizontal drains, and dewatering adits as a multi-layer system to achieve the design depressurization targets. |
Surface water reporting to the pits due to failure or inundation of water management structures. Excessive surface water into the pits may result in localized slope failures, reduced mine productivity or increased pumping costs. These risks have been mitigated by adjusting the mine plan to limit the exposure of haul ramps to potential erosion from surface water sources and adequate geotechnical design of the water management infrastructures.
The risks associated with the open pits of the 2016 PFS are common for many open pit mining projects with large open pits mined in areas of mountainous terrain with high precipitation. The height of the highwalls also needs consideration. To address the height of the pit walls the mining and geotechnical teams have drawn on experience from design work in similar terrain and operations in these conditions and applied it to the designs in this study to reduce the risk through design, and operating practices, and procedures integrated into the plan.
25.3.2 | Underground Mining |
A conservative approach was adopted for the design of the critical aspects of the Mitchell and Iron Cap block caves that might impact meeting the production and mill feed schedules. Examples of this include the rate at which the construction of the drawbells is accomplished, the production ramp-up curve and maximum rate of draw of individual drawpoints, the number of drawpoints available for production at any one time, and the travel distance for the LHD vehicles. Design assumptions for all of these are within demonstrated industry experience and are considered achievable. The development advance rate during the critical pre-production period, and subsequently in the production period, have been demonstrated to be industry achievable, and with the technology advances that are currently being developed, may be demonstrated to be conservative in the future. As further conservatism, technological advances with regard to automated and battery powered equipment have not been incorporated in the 2016 PFS design. The adoption of these more advanced technologies may lead to operational efficiencies and reduced costs in the future as they are studied further and adopted into the design.
Seabridge Gold Inc. | 25-8 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
In developing the production and grade schedules using GEOVIA PCBC™ software, it has been assumed that an infinite supply of zero grade waste rock is available above the columns being drawn. This and other factors controlling the estimates of ore dilution using GEOVIA PCBC™ have been chosen conservatively.
There are recognized uncertainties in predicting the fragmentation of the caved rock at the drawpoints, and the relatively low-fracture intensity of the rock mass at Mitchell, and to a lesser extent Iron Cap, led to the estimated fragmentation being assessed in some detail. Other block caving mines such as Palabora Mine have demonstrated that with careful planning and the availability of equipment to deal with oversize rock, drawpoint production rates comparable to those proposed at Mitchell and Iron Cap are achievable. Furthermore, if the ore pass and grizzly systems do not achieve the planned production rate, and the material transported to the passes is coarser than expected, mitigation measures can be introduced such as employing additional mobile breakage equipment and redesigning the undercut blasting to enhance the fragmentation during the early stages of the column draw.
As an additional measure to mitigate against possible adverse fragmentation issues at the drawpoints, the designs for Mitchell and Iron Cap incorporate pre-conditioning of the rock mass by hydraulic fracturing, which was not applied at Palabora Mine. This is expected to enhance the fragmentation of the material reporting to individual drawpoints. It also mitigates against possible concerns regarding adverse impacts from stress-induced rock bursts at Mitchell, although the proposed depth of mining and the geotechnical characteristics of the rock mass do not indicate that this will likely pose a major issue. The stress conditions at Iron Cap are estimated to be relatively benign because the deposit is located above the valley floor in a relatively stress-free zone.
The geotechnical characterization of the Mitchell deposit is based on a number of well-positioned geotechnical boreholes that have been geotechnically logged in detail and tested hydrogeologically. Some geotechnical holes have been drilled in the general vicinity of the proposed access development and these holes provide adequate indications of the quality of the rock mass to minimize major uncertainties. Further mitigation of additional uncertainties will be achieved by undertaking further geotechnical drilling in the future.
The geotechnical characterization of the Iron Cap deposit has been based on several holes that were drilled for geotechnical purposes, but reliance was also placed on comparisons of the geological, lithological, and alteration characteristics between the Mitchell and Iron Cap deposits, and developing geotechnical correlations between the two. The correlations were shown to be quite favourable, but further confirmation will be required by undertaking additional geotechnical drilling in the future.
Seabridge Gold Inc. | 25-9 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
The spacing and layout of the drawpoints of 15 m by 15 m was conservatively selected to achieve favourable interaction between draw columns, minimize early entry of waste dilution material, and to maintain good draw control. Future studies may indicate that this conservatism is more than is required, and an increased drawpoint spacing and layout can possibly be adopted with associated enhanced project economics.
Industry standard approaches have been adopted to support the drawpoints and to maintain their stability. If future analyses of abutment stresses and the interaction of the progressive advance of the undercut on the underlying drawpoints indicate more adverse stress conditions than currently estimated, this can be mitigated by installing higher capacity and more resilient support. It can also be mitigated by adopting a stress-shadowing advance undercut approach, instead of the currently proposed concurrent undercut approach.
The maximum height of draw (HOD) assumed in the design, which controls the maximum tonnage that is drawn at an individual drawpoint, has been limited to 500 m. Based on favourable experience at a number of block cave mines operating in good quality rock, the trend in the industry under these circumstances is to plan to increase the maximum HOD to beyond 500 m. However, the more conservative 500 m limit has been adopted for the Mitchell and Iron Cap designs. There is still the potential requirement for ongoing rehabilitation of drawpoints and mucking drives as a result of changing stress conditions and the adverse impact of secondary blasting. An estimate of the cost of this rehabilitation has been made and this has been included in the block cave operating costs.
The extent of surface disturbance from caving and the associated formation of the crater and more peripheral surface cracking have been estimated conservatively for the relatively good geotechnical quality of the rock mass at Mitchell and Iron Cap. Estimates have also been made of the influence of this disturbance on the stability of the walls of the Mitchell open pit and adjacent valley walls. Based on the analyses to date, all permanent infrastructure is beyond the potential impact zone. Major infrastructure that might be critically impacted has been conservatively located well beyond the potential impact zone. If further assessments and future monitoring indicate a potential impact of some of the less critical infrastructure, there is sufficient space on surface for this to be re-located at modest additional cost. The Iron Cap block cave design does not include infrastructure that might be influenced by the extent and nature of the surface disturbance, other than the surface water runoff that might enter the cave that is discussed further in this section.
The estimate of the inflow of surface runoff from rainfall and snowmelt within the catchment area formed by natural slopes, the open pit (in the case of Mitchell), and the crater and adjacent surface cracking, has been based on a 1-in-200 year event. A conservative approach has been adopted in estimating the runoff coefficient, water retention, and impeding factors which control the intensity of this runoff water reaching the production levels underground. The inflow quantities and rates reaching the underground workings are potentially very large for a 1-in-200 year event.
Seabridge Gold Inc. | 25-10 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
A water management system has been developed for Mitchell, which does not rely on any temporary storage of water in any of the mine openings otherwise required for the operation of the mine. Instead, dedicated water diversion tunnels with a large dedicated storage capacity have been included in the design, with a dedicated shaft and pumping system to extract the water to surface. If experience in the future indicates that the storage capacity is too small to prevent flooding of the operational part of the mine, the pumping rate storage volume can readily be increased or more water diversion tunnels can be added for extra storage. Also, if there is concern about the capacity and functionality of the partial diversion system beyond the rim of the pit that helps control some of the inflow water, or if there is concern that an even larger event than the 1-in-200 year event might occur, consideration can be given to diverting water underground to temporarily flood areas that are benign and do not house critical underground infrastructure, and/or to installing bulkhead doors that can be closed under extreme conditions to limit flood damage to critical underground infrastructure.
The elevation of the production level at Iron Cap is higher than the Mitchell valley floor. This provides for a much simpler water management system than at Mitchell. This is based on gravity flow of water from the entry points underground to a short shaft that connects to the North Slope Depressurization Tunnel. The water then gravity drains from this tunnel to the WSF for treatment.
The development of voids beneath the back of the active cave, and the associated concerns about hazardous conditions developing and air blasts occurring, is mitigated by maintaining good knowledge about the cave profile as cave mining progresses. This knowledge is obtained by ongoing monitoring of the geometry of the caved material using techniques such as microseismic monitoring and seismic tomography, which are important mitigation measures to maintain necessary draw control.
Experience at other block cave mines, where there is more potential for mud rushes to occur because of the increased presence of fines (naturally occurring or generated by the attrition of caved rock as it is drawn down) than those at Mitchell or Iron Cap, has shown that such concerns can be mitigated. The measures that can be adopted include monitoring of the flow of water from individual drawpoints, temporary closure of certain areas that are deemed vulnerable until water flows at drawpoints decrease sufficiently, and the adoption of remote mucking until conditions are deemed to be acceptable to return to full entry.
25.3.3 | Tunnels |
The 2016 PFS involves approximately 77km of tunneling at start up. This includes both infrastructure and water diversion tunnels to accommodate the challenges of building a mine in mountainous terrain and to reduce project risks. In later stages of the mine operation, the cumulative constructed tunnel length rises to over 100 km. Tunnels provide direct routes for ore transport from the mining areas to the Treaty OPC and divert surface water around mining areas and facilities. Tunnels were assessed as having lower operational risks than alternative surface routes. Surface routes are more susceptible to conflicts with other surface infrastructure and ongoing mine operations, and also present risks from climate and geohazards. The permit covering the MTT route was secured from the BC Government in September 2014.
Seabridge Gold Inc. | 25-11 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
The PFS level of design for the tunnels in this study is based on reasonable assumptions made from preliminary-level investigations that include geological mapping of tunnel routes, geophysical surveys, drilling, and hydrogeological/geotechnical sampling and testing. Poor ground conditions caused by unforeseen faults, areas of weaker than anticipated rock, and/or higher than assumed differential stresses are issues that could cause major disruptions to tunnel construction and operation. If not accounted for properly in design, tunnel collapse or poor performance issues causing business interruptions could result, thus tunnel design represents a significant risk for mine operations and warrants additional investigation in subsequent design phases. There are many successful tunnel projects, including comparable tunnel projects in the KSM area, such as the nearby Granduc Tunnel, that have addressed similar risks successfully. Higher speed methods for long axis tunnelling are becoming more prevalent in mining and civil applications and tunnelling technologies are developing rapidly. However, the cost of mitigation versus the impact of schedule delays must be considered in a risk analysis. Mitigations already incorporated include: the use of twinned tunnels to provide opportunities to advance alternate headings in problem areas, drilling and geophysical testing from surface, the use of probe and pilot drilling in areas of difficult ground conditions, and obtaining the now in place permitting allowing early tunnelling starts.
A Risk Analysis in future studies will lead to cost-benefit analyses of additional investigations, assessment of risk sensitivities for alternate tunnelling methods, review of available changes in designs or routings, and in some cases alternative overland systems so that costs and risks of the alternatives can be considered in any decisions.
25.3.4 | Construction Critical Path |
The construction critical path runs through early establishment of pioneering roads along the TCAR and CCAR alignments, to establish access to the MTT portals, and then four years of tunnel excavation to complete the twinned 23 km tunnels. Pioneering road construction will be performed from the middle of Year -6 through Q2 Year -5 and includes multiple headings supported by helicopters to install culverts, bridges, and construction of the pioneering road that will expand to full width before the start of the second construction winter in Year -5.
While considered feasible, the schedule is considered aggressive, and additional measures to mitigate potential impacts completion of these roads may have on the critical path is recommended for action in the next design phase. A notable mitigation to the construction critical path is the fact that road construction permits have been granted to Seabridge, allowing road construction to begin earlier in the KSM development plan.
25.3.5 | Metallurgical Performance and Process |
Lower than expected metal recoveries and copper grade of the concentrate produced is the principal process risk, particularly through the capital payback period, due to significant deviations in metallurgical performance. Unexpected inferior metallurgical performance would affect the 2016 PFS economics.
Additional testwork is required to better characterize metallurgical response of mineralization from the different ore sources. Further process condition and flowsheet optimization would improve process design to accommodate potential variations in metallurgical performance. Current recoveries and economic returns are estimated based on the process design, mainly developed from the metallurgical test results of the Mitchell samples. Samples from the Kerr, Sulphurets, and Iron Cap deposits were also subjected to metallurgical tests and responded similarly to the Mitchell mineralization.
The 2016 PFS proposes to use energy efficient HPGR as a part of the comminution process. The test results from the Mitchell and Sulphurets samples show that this mineralization is amenable to HPGR treatment, although the Sulphurets samples are more resistant to HPGR treatment as compared to the Mitchell samples. The HPGR circuit performance is more sensitive to mill feed moisture and clay contents than other portions of the comminution circuit. Lower than expected performance from the HPGR comminution circuit due to higher than expected moisture and/or clay content can result in a reduction of mill production that could have an impact on the 2016 PFS economics.
Seabridge Gold Inc. | 25-12 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
26.0 | Recommendations |
26.1 | Introduction |
This section outlines areas to investigate for improvements to the two alternative development options for the KSM Property that are presented in this Report. A high-level budgetary estimate for the completion of each recommended item is provided in US dollars.
26.2 | 2016 Prefeasibility Study Recommendations |
Should Seabridge decide to advance the 2016 PFS to the next logical phase of study, the QPs that authored the 2016 PFS have the following recommendations to support the next level of study.
26.2.1 | Open Pit Mining and Reserves |
During more advanced studies, the following optimization studies are recommended:
● | conduct a detailed blasthole drill study in conjunction with drill manufacturers to determine site-specific penetration rates for the rock types from each mining area. The 2016 PFS is based on typical values |
● | delineate overburden in more detail for pre-production and initial benches of pushbacks. Conduct a detailed haulage simulation study to refine the truck/shovel production performance in the mining schedule for pre-production and the first 5 years of mine operations. Simulations should also investigate opportunities to reduce mining costs (e.g. combine pit and dump design strategies to lower fuel consumption from increased downhill loaded hauls). This optimization could have significant efficiency and cost impacts in mountain mines |
● | analyze alternative equipment power technologies, such as liquefied natural gas (LNG), battery powered and fuel cell |
● | evaluate the RSF basal drain design(s) to reduce the volume requirements, which could lead to reduced mining costs and greater flexibility in the timing of waste rock placement |
● | design in more detail and optimize the pre-stripping plan. Conduct operability studies including short range planning on selected key areas of the proposed mine plan |
● | refine the startup pit selection and initial cutoff grades to reduce the capital payback time |
Seabridge Gold Inc. | 26-1 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
● | obtain budgetary quotes for the operating cost estimates for an optional leased truck fleet in the early years of the mine schedule (pre-production and initial years of production) |
● | future pit design work should utilize more detailed parameters such as variable slope angles with wall height. |
The total estimated cost for these optimization studies is between US$50,000 to US$75,000.
The open pit mine planning designs will need to be reworked to a feasibility-level of detail. The total estimated cost for this open pit mine planning is between US$200,000 to US$250,000.
Also, close-spaced drilling and a higher resolution Mineral Resource model is recommended for the material in the first several years of open pit operations to test for grade and metallurgical continuity. The estimated cost for the extra drilling, assaying, Mineral Resource modeling, and metallurgical testing, is between US$4 million and US$5 million.
26.2.2 | Pit Slopes |
The following geotechnical and hydrogeological work is recommended to support future assessments of the KSM open pit slopes:
● | complete a field program of large-scale hydrogeological testing via pumping wells. The results of these tests are required to increase the confidence in the design of the depressurization system for the open pit slopes of the Mitchell, Sulphurets, and Kerr zones. A total of five pumping wells and ten monitoring wells for a total meterage of approximately 3,000 m is required |
● | complete a field program of geotechnical drilling in the Kerr and Sulphurets zones to support updates to the geotechnical model and slope designs. It is estimated that 10 geotechnical holes with a total meterage of approximately 5,000 m is required between the two zones. A program of televiewer surveys of the drill holes, geotechnical logging of the core and laboratory testing should be undertaken |
● | update the hydrogeological model for the latest geological model and mine plans. This update is required to improve the reliability of the depressurization quantity estimates |
● | extend the slope design updates to the east and west walls of the Mitchell open pit. Develop a set of updated slope design recommendations for the whole zone that reflect the updates to the geotechnical model |
● | update the slope design recommendations for Kerr and Sulphurets open pits based on the results of the recommended geotechnical drilling. |
The recommended work is estimated to cost US$3.8 million to US$5.0 million. This estimate includes drilling, drill pads, field support (helicopters, camp), and engineering fees. The range of costs are based on per drilled metre expenditures for previous studies.
Seabridge Gold Inc. | 26-2 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
26.2.3 | Underground Mining and Reserves |
The following optimization studies are recommended for underground block cave mining of the Mitchell deposit, beneath the Mitchell open pit, and of the Iron Cap deposit.
Mitchell
● | undertake a detailed study of the optimum pit profile to transition from open pit to underground mining |
● | review available geotechnical logging information within the mineralized rock beneath the pit and if deemed beneficial, geotechnically log additional available core to upgrade assessments of fragmentation, drawpoint hang ups, oversize, and drawpoint layout and spacing |
● | evaluate the impact of fragmentation, oversize, and hang ups on productivity |
● | undertake a detailed cost-benefit assessment regarding fragmentation and mitigating rock stress impacts, and evaluate the associated impact on schedules of incorporating the pre-conditioning as presently designed into the overall design and mine plan to confirm it provides a net positive benefit |
● | undertake a study of the potential to increase the drawpoint layout and spacing from the currently proposed 15 m by 15 m and maintain favourable interaction between draw cones without experiencing adverse dilution and premature reporting of sub-economic rock to the drawpoints |
● | undertake additional laboratory rock strength tests on core to characterize the rock mass strength of the various lithologies and alteration types and intensities |
● | undertake computer analyses of the stress conditions controlling the extent to which stress-induced fracturing enhances primary fragmentation in the back of the cave, and the potential to experience associated rock bursting as a result of this stress-induced fracturing |
● | undertake computer analyses of the abutment and cave front stress concentrations. Assess whether an advanced undercut approach, rather than the presently proposed concurrent undercut approach, needs to be adopted to control the stress concentrations on the drawpoints and maintain adequate drawpoint stability |
● | undertake additional studies of the progressive formation of the crater and resulting destabilizing influence of this on the overlying pit and natural valley slopes. Conduct more detailed assessments of the overall surface disturbance and the possible influence of this on the surface infrastructure adjacent to the block cave operation |
● | develop and undertake a geotechnical drilling and logging program to characterize the rock that the peripheral infrastructure will be excavated in, including access ramps, ventilation shafts, water conveyance and storage tunnels, crusher stations, underground excavations to support production activities, etc. |
Seabridge Gold Inc. | 26-3 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
● | undertake a detailed review of the surface water runoff inflows and the underground water management system. Conduct optimization studies to meet conveyance and temporary storage requirements to minimize flooding of the mine and pump the water from the mine in the most cost effective manner. |
● | undertake detailed GEOVIA PCBC™ scheduling studies to optimize caving front and drawpoint sequencing and draw control requirements |
● | conduct mine productivity simulations to confirm operability and identify potential restraints and restrictions in achieving the proposed production schedules |
● | develop feasibility-level mine designs and designs of underground infrastructure including crushers, conveyor systems, shops, and ventilation |
● | assess opportunities to incorporate mine automation and battery powered equipment into the design to reduce ventilation demand and operating costs. |
Iron Cap
● | similar studies to those recommended for Mitchell are required for Iron Cap as well, although in a number of cases the results of the assessments for Mitchell can be applied to Iron Cap on a comparative basis, with the geotechnical characteristics of the Mitchell and Iron Cap rock masses being somewhat similar. Studies are not required of a transition from open pit to underground mining, and the underground water management system at Iron Cap does not require temporary storage and pumping |
● | the current production schedule includes production from Iron Cap starting in Year 32, and there are no transition restraints with other production sources in bringing Iron Cap into production. Based on this, the level of study required for Iron Cap is less than for Mitchell to undertake relevant economic assessments for a feasibility-level study |
● | notwithstanding this, the most significant gap in advancing Iron Cap to a feasibility level is that no geotechnical drilling and logging has been undertaken specifically directed to characterizing the response of the rock mass to block cave mining. In the current study, this has been done primarily by comparison and inference with the Mitchell deposit, and limited geotechnical drilling for pit stability assessments in the mineralized rock. It is recommended that a limited program of geotechnical drilling appropriate for block cave mining assessments be undertaken at Iron Cap to advance the studies to a feasibility level |
● | this feasibility-level underground work for both Mitchell and Iron Cap, including a limited geotechnical drilling program at Iron Cap, is projected to cost between US$2.5 million to US$3.0 million. |
Seabridge Gold Inc. | 26-4 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
26.2.4 | Rock Storage Facilities |
KCB recommends that a geotechnical site investigation program be carried out for further delineation and characterization of foundation soils in Mitchell Valley, within the footprint of the Mitchell RSF, with a focus on the area of a known deposit of weak soils near the MTT muck piles. The characterization would use Standard Penetration (SPT) testing and undisturbed sampling for collection of samples for laboratory strength testing. This program will include:
● | geotechnical drillholes in the area adjacent to the MTT muck piles and in the RSF toe above the WSF pond area. The holes should be advanced up to 60 m in overburden, with Shelby tube samples and SPT tests. Mobilization of a suitable rig for this program can be combined with drilling in the TMF area for borrow and foundation assessment |
● | test pits to assess surface soil conditions may be used to augment drilling (for early-stage investigations these will require helicopter supported equipment mobilization) |
● | geotechnical testing program including consolidation, triaxial, direct shear, and index testing. |
Cost of this drilling and a subsequent geotechnical laboratory program is US$600,000 to US$650,000.
A stability assessment and design review is required to assess the findings of the site investigations and to review suitability of existing designs to mitigate the presence of this known weak soil layer. Cost of the assessment and design review is US$75,000 to US$85,000.
26.2.5 | Metallurgical Testing and Process Engineering |
In order to optimize process conditions, establish design-related parameters and more accurate metallurgical performance projections for the next stage of study, further metallurgical testwork is recommended, especially the locked cycle flotation tests and cyanidation tests on various ore composite samples from the Sulphurets, Kerr, and Iron Cap deposits. Tetra Tech makes the following recommendations:
● | additional metallurgical test work and mineralogical evaluations should be conducted to optimize process conditions and to establish design-related parameters for the next stage of study. The test work should include variability testing of samples from all deposits, especially from the Sulphurets, Kerr, and Iron Cap zones. The variability tests should be a part of the geo-metallurgical testing program that is recommended for the PFS to better understand metallurgical responses of the mineralization in these resources. The testwork should further investigate the effect of low slurry solid density on copper and gold in bulk rougher flotation, especially for the Iron Cap and Kerr mineralization. The test program will provide inputs for geological modelling development and mine plan update for better mill feed control |
Seabridge Gold Inc. | 26-5 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
● | technically and economically feasible gold recovery processes from the gold bearing products rejected from copper and gold bulk flotation of the Iron Cap and Kerr mineralization, such as first cleaner scavenger tailing and pyrite concentrate, should be further investigated, The processes should include further optimizing cyanide leach conditions, improving extracted gold and silver recovery from cyanide leach solution and alternative gold and silver extraction processes, such as thiosulphate leaching, ultrafine regrinding treatment and bacterial oxidation. Additional value that may contribute from associated copper due to co-dissolution during gold and silver extraction should be investigated |
● | further study should be conducted to optimize the proposed cyanide recovery and destruction methods |
● | a metallurgical laboratory test program should be performed on ore composites representing each year of the initial seven years of open pit mine production from Mitchell and Sulphurets according to the updated mining plan |
● | further study into economical water treatment methods is recommended for water from the CIL pond. |
The estimated costs of these programs range from US$3.0 million to US$4.0 million inclusive of sample shipping and short-term storage costs. Costs for sample collection (i.e. drilling) are not included as this recommendation assumes samples would be derived from core stored on site or in off-site warehouses.
26.2.6 | Water Management |
Water Storage Facility and Mine Site Water Management
KCB recommends additional hydrogeological and geotechnical site investigations in the WSD footprint area including:
● | hydrogeological/geological data gap analysis and review of additional water level and time series piezometer data to interrogate interaction of geological model assumptions with hydrogeological model parameters |
● | additional geological mapping and geophysical surveying of the WSD footprint area. May include high resolution drone lidar to map detailed topography of the WSD canyon area |
● | additional hydrogeological/geotechnical site investigations consisting of drilling up to 2,700m across the WSD area, with packer testing, televiewer downhole imaging, and installation of multi-level piezometers equipped with data loggers. Based on the results, review locations and requirements for the drilling of 3 large diameter wells for pumping tests, with associated monitoring holes |
● | geotechnical testing is included for WSD area drill holes to characterize soils in the WSD footprint, including SPT sampling and geotechnical laboratory testing program. Complete seismic and test pit programs over the WSD footprint area to assess soil conditions |
Seabridge Gold Inc. | 26-6 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
● | installation of thermistor chains within new or existing drill holes in the WSD footprint area to obtain annual rock mass temperature variations with depth to assess effect of temperature on grouting performance |
● | in the area of the Mitchell Glacier diversion inlets, geotechnical drilling is recommended to assist in feasibility level design of sub-glacial inlets. |
Based on drilling and geophysical quotes, cost of these site investigation programs is US$4.0 million to US$4.5 million, including an allowance for drill pads, instrumentation, pumping test costs field support (helicopters, camp), and engineering fees.
The following design studies are recommended to address the IGRB recommendations:
● | review of potential for WSD gravity discharge structures |
● | commencing an ongoing assessment of effects of long term exposure of monzonite rockfill to acid water is recommended, using accelerated testing techniques |
● | assessment of options for capture of selenium seepage from RSFs and from other sources to develop an optimum strategy for control of selenium |
● | update of WSD and mine site water balance to incorporate revised hydrological and meteorological parameters including updated estimates of response to extreme events |
● | update of hydrogeological seepage models for WSD based on updated site investigations and site parameters |
● | advancement of WSD, diversion tunnel, spillway and mine site water management designs to a feasibility level of detail. |
Cost of these design studies and updates is US$2.0 million to US$2.5 million.
Water Balance
Design parameters such as the 50-year, 100-year, and 200-year storm and flood events; the 100-year dry year and 200-year wet year have been used in PFS design for the sizing of diversion ditches and tunnels and for evaluation of water quality in receiving waters. These parameters have to date been developed from several years of onsite precipitation and streamflow gauging, the nearby longer period Eskay Creek station, as well as use of Global Climatic Models (GCMs). While these analyses provide suitable design parameters for the PFS, more comprehensive analyses incorporating long-term records in the wider region surrounding the sites are required for advanced design phases. In general terms, the longer-term (20 to 100 plus years) meteorological and runoff data from regional stations provide more reliable statistical distributions that may then be extrapolated to the various areas of the site by correlating with onsite stations, some of which have now been monitored for over 12 years.
Seabridge Gold Inc. | 26-7 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
It is important for the PFS design evolution that the meteorological and runoff database is expanded and the design parameters refined by conducting a regional hydrologic evaluation incorporating precipitation and stream flow monitoring data from a larger area surrounding the mine site. Typically, the steps in such an analysis include:
● | selection of long-term meteorological and runoff stations |
● | single station frequency analyses for the parameters of interest (such as precipitation of durations ranging from hours to a year, annual maximum flood peaks, etc.) |
● | regional analyses to determine frequency curves applicable to the various areas such as the mine site and the TMF area. |
Following completion of this metrological and runoff data base review, evaluation is recommended to be undertaken to update the site-specific water balance that will be used as the basis in future design. Cost to complete this work is US$350,000 to US$450,000.
26.2.7 | TMF Area |
KCB recommends additional hydrogeological and geotechnical site investigations in the TMF footprint area consisting of:
● | hydrogeological data gap analysis and review of requirements for additional water level and time series piezometer data. Data gap analysis to refine requirements for locations of pumping tests or other investigations |
● | data gap review of geotechnical (foundation) and geochemical (characterization of borrow and diversion excavations) data requirements. |
● | seismic surveying and heli-portable auger soil sampling to further delineate borrow resources and characterize construction materials |
● | geotechnical drilling with hydrogeological testing (packer, multilevel piezometer and data logger installations) at the North, Saddle and Southeast seepage dams. Total of up to; 26 drillholes for foundation and borrow, 11 large diameter wells for pump testing and 7 Cone Penetration Tests are recommended for dam foundation assessment. Test pitting for borrow investigations may require helicopter support for equipment mobilization |
● | seep mapping, overburden characterization, and additional overburden permeability testing in the CIL Residue Cell area to further inform the next design stages for determination of drain requirements beneath the Saddle Dam and CIL Cell liner. |
Based on geophysical and drilling quotes, costs for these site investigation and laboratory testing programs is US$9.0 million to US$11.0 million including an allowance for line cutting, drill pads, instrumentation, pump testing, field support (helicopters, camp), and engineering fees.
Seabridge Gold Inc. | 26-8 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
The following design updates are recommended to address remaining IGRB TMF area recommendations:
● | update of TMF area hydrogeological and seepage models and review of required seepage mitigations based on updated site investigations |
● | updates to drainage designs for TMF dam and CIL liner footprint areas based on revised hydrogeological data and models with liner ballast assessment |
● | review of required TMF dam cross sectional designs required to meet seasonal storage, freeboard related stability, starter dams and constructability requirements relative to cycloning design optimizations, borrow availability and feasibility level design requirements |
● | review and update of volume/storage requirements for each cell, based on revised CIL Residue cell volumes |
● | review of CIL Residue Cell subaqueous deposition system, and liner and drain placement plans for constructability/operability and cost optimizations |
● | update to TMF area water balance with design updates for discharge pipeline and diffuser system |
● | advancement of TMF area water management designs to FS-level. |
Cost of these design updates is US$1.0 million to US$1.5 million.
26.2.8 | Tunnels |
Geotechnical
KCB recommends additional geological and geotechnical investigations at the portal locations, where these have not been investigated already, and also where feasible along the tunnel alignments in the PFS design. The recommended investigations consist of:
● | data gap analysis for tunnel design parameters including geological, geotechnical and geochemical aspects |
● | additional mapping and rock sampling to better characterize properties of lithological units at the portals and along the alignments for geotechnical and geochemical assessments |
● | more detailed mapping of portal areas and targeted geophysical investigations to assess locations of potential structures (e.g., faults, contacts or water bearing structures along tunnel alignments) |
● | drilling at selected locations along the permitted MTT alignment (for example, undrilled opportunities for readily accessible drilling to MTT elevation along the alignment include 200 m deep, 500 m deep, and 750 m deep locations). Drilling will provide an opportunity to obtain geotechnical and geochemical samples for laboratory testing, to assess in situ stress regimes, to perform televiewer and packer testing and to install piezometers along the route. For the next phase of MTT drilling KCB has identified 10 target locations for a total of up to 4,300 m of drilling |
● | drilling for diversion tunnels and PFS infrastructure tunnels will primarily focus on shallower holes, with focus on portal and inlet area rock mass characteristics and sampling of lithological units. Several longer holes (up to 800 m) are recommended to test regional fault systems |
● | geotechnical and geochemical laboratory testing on samples obtained from drilling and mapping programs. |
Seabridge Gold Inc. | 26-9 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
The programs will inform selection of the optimum tunnelling method, allow refinement of tunnelling risk, better identify diversion tunnel lining requirements, portal locations and portal development designs and assist with determination of appropriate contingencies. The cost of these programs is estimated to range between US$4.0 million and US$6.0 million, including drilling costs, drill pads, field support (helicopters, camp), and engineering fees.
Tunnel Design
An expert-level risk assessment of the critical tunnels is recommended following the tunnel geotechnical data gap analysis to identify aspects of tunnels with high consequence to the construction schedule. This should also be done for water diversion tunnels with high impact to future facilities. If the end results are design alternatives that cannot mitigate high-consequence risk, then significant data must be collected regarding ground conditions and geologic structure. The risk analysis, and any subsequent data collection and studies, should be done prior to FS so that the PFS can be re-evaluated before significant FS work starts. The analysis should include re-evaluation of opportunities and risks with sensitivities of other tunneling methods to unforeseen conditions. Methods reviewed should include high speed drill and blast, use of a single tunnel with an internal dividing wall, or mechanical systems such as a continuous miner.
The results of the opportunity and risk analysis will indicate where, or if the following are needed:
● | geophysical studies to identify major structures and geology to estimate possible ground conditions |
● | drilling of areas along the tunnel alignment to confirm structures and geology indicated in the geophysical survey |
● | a detailed risk study may also inform if alternate mitigations such as tunnel lining or other measures to improve tunnel stability and capacity can be considered, instead of the redundant water diversion tunnels included in the water management designs at certain times during mine life and beyond |
● | ongoing analysis of tunneling method and machines is needed, as this is a continuously advancing technology. |
Following the completion of the above risk analysis, possible data acquisition programs, and assessment of resultant alternative design concepts, advanced design updates and budgetary quotes for costing of mitigation options may be needed at an estimated cost of US$250,000.
Seabridge Gold Inc. | 26-10 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
26.2.9 | MTT Transport System |
The following optimization studies are recommended:
● | optimize the size and configuration of the trains using dynamic train movement modelling |
● | investigate alternative rail systems such as tracks, ballast and ties, and pre-manufactured systems etc. to optimize supply and construction cost and schedule impacts |
● | evaluate the construction cost and construction schedule of the MTT with respect to tunnel dimensions and alignment, in conjunction with the above optimization study of the train consists |
● | update the analysis of freight, fuel, lime and personnel transport requirements through the MTT to support the mine area operations, especially if the other design changes to the PFS affect these components |
● | define and coordinate ore transport and freight labour requirements between train, processing plant, and Mitchell OPC |
● | evaluate the effect of adjusting the tunnel grade for train start up at the loadout and stopping at the unloading station as well a tunnel alignment and revise the designs as appropriate |
● | engage the train logistics specialists to investigate the possibility of delaying the twinning of the most eastern section of the MTT without adversely affecting total train, ore, freight, and personnel requirements with the objective reducing startup expenditures |
● | engage several train system suppliers to optimize the train fleet prior to FS-level budgetary quotes. Due to the specific requirements of the system, it may be necessary to pay for these studies. |
Train system designs should be updated during more advanced studies. The train system engineering portion to FS-level detail is estimated to cost between US$250,000 to US$350,000.
Seabridge Gold Inc. | 26-11 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
27.0 | References |
1985 Fisheries Act, RSC. C. F-14. (1996a).
Alldrick, D.J., and Britton, J.M. (1988). Geology and mineral deposits of the Sulphurets area. British Columbia Ministry of Energy, Mines and Petroleum Resources, Open File Map, 4 p.
ALS Canada, Ltd., ALS Metallurgy Kamloops (2013). Preliminary Metallurgical Testing – Kerr Deep and Camp Zone KSM Project – (KM 3735). May 9, 2013.
ALS Canada, Ltd., ALS Metallurgy Kamloops (2014). Preliminary Metallurgical Testing – Deep Kerr and Iron Cap Zones – KSM Project - (KM 4029, Part A). May 16, 2014.
ALS Canada, Ltd., ALS Metallurgy Kamloops (2014). Preliminary Metallurgical Testing – Deep Kerr and Iron Cap Zones – KSM Project – (KM 4029, Part A). May 27, 2014.
ALS Canada, Ltd., ALS Metallurgy Kamloops (2015). Preliminary Metallurgical Testing – Deep Kerr – KSM Project – (KM 4514). August 05, 2015.
ALS Canada, Ltd., ALS Metallurgy Kamloops (2015). Preliminary Metallurgical Testing – Iron Cap – KSM Project – (KM 4672). August 04, 2015.
ALS Metallurgy (2015). Tailings Generation Test Work for KSM Deep Kerr and Mitchell Composites – KSM Project (KM 4811). September 3, 2015.
ALS Metallurgy (2016). Metallurgical Testing – Kerr Deep and Mitchell – KSM Project (KM 5087). September 27, 2016.
ALS Metallurgy (2017). Preliminary Metallurgical Testing – Deep Kerr Zones – KSM Project (KM 5063). January 18, 2017.
ALS Metallurgy (2017). Preliminary Metallurgical Testing – Deep Kerr Zones – KSM Project (KM 5266). April 13, 2017.
ALS Metallurgy (2017). Preliminary Metallurgical Testing – Iron Cap Zones – KSM Project (KM5248). April 13, 2017.
ALS Metallurgy (2018). Preliminary Metallurgical Testing – Iron Cap Zones – KSM Project (KM5501). April 17, 2018.
ALS Metallurgy (2018). Selenium Testing on Iron Cap Process Samples, Revision 2 (KM5501, Selenium). April 19, 2018.
Seabridge Gold Inc. | 27-1 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
ALS Metallurgy (2018). Metallurgical Testing of a Mitchell Bulk Cleaner Scavenger Tailings Sample (KM 5455). June 19, 2018.
ALS Metallurgy (2019). Preliminary Metallurgical Testing – Iron Cap Zones – KSM Project (KM5806). March 12, 2019
ALS Metallurgy (2020). Preliminary Metallurgical Testing – Iron Cap Zones – Composites IC-2018-13 to IC-2018-18 – KSM Project (KM6004). January 8, 2020.
BC MEMPG (2009). Guide to Processing a Mine Project Application under the British Columbia Mines Act. British Columbia Ministry of Energy, Mines and Petroleum Resources, January 2009. http://www.coalwatch.ca/sites/default/files/Guide-to-Processing-A-Mine-Project-Application-Under-The-British-Columbia-Mines-Act.pdf.
BC MEMPR (2008). Health, Safety and Reclamation Code for Mines in British Columbia. British Columbia Ministry of Energy, Mines, and Petroleum Resources. http://www.empr.gov.bc.ca/Mining/HealthandSafety/Documents/HSRC2008.pdf (accessed November 2010).
BC MFLNRO, 2012, Ministry of Forests, Lands, Natural Resource Operations and Rural Development Engineering Manual.
BC MOE (2013). The Effluent Permitting Process under the Environmental Management Act: An Overview for Mine Project Applicants. Ministry of Environment, April 2103. http://www.env.gov.bc.ca/epd/industrial/mining/pdf/effluent_permitting_guidance_doc_mining_proponents_apr2013.pdf
BC MOF and BC MOE (1995). Riparian Management Area Guidebook. Government of British Columbia: Victoria, BC.
BGC (2012). Preliminary Assessment of Open Pit Slope Instability Due to the Mitchell Block Cave. December 24, 2012.
BGC (2020). KSM Project – Mitchell Zone – 2019 Geotechnical Model and M1/M2 Slope Designs – Rev1. Report issued to KSM Mining ULC, February 28, 2020.
Brenda Mines Ltd. (1989). Preliminary Metallurgical Testwork on “106” Low Grade Sample. Peachland, BC. May 1989.
Bridge, D. J. (1993). The deformed Early Jurassic Kerr copper-gold porphyry deposit, Sulphurets gold camp, northwestern British Columbia. Unpublished M.Sc. thesis, Vancouver, Canada, The University of British Columbia, 303 p.
Canadian Institute if Mining, Metallurgy and Petroleum (CIM) (2014). CIM Definition Standards for Mineral Resources and Mineral Reserves. May 10, 2014.
CDA (2007). Dam Safety Guidelines. http://www.imis100ca1.ca/cda/CDA/Publications_Pages/Dam_Safety_Guidelines.aspx (accessed October 2012).
Seabridge Gold Inc. | 27-2 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Cloos, M. (2001). Bubbling magma chambers, cupolas, and porphyry copper deposits. International Geology Review, 43(4), 285-311.
Contaminated Sites Regulation, BC Reg. 375/96.
DFO (1986). Policy for the Management of Fish Habitat. DFO/4486. Fish Habitat Management Branch, Department of Fisheries and Oceans Canada: n.p.
Environmental Management Act, SBC. C. 53.
Febbo, G. E., Kennedy, L. A., Savell, M., Creaser, R. A., and Friedman, R. M. (2015). Geology of the Mitchell Au-Cu-Ag-Mo porphyry deposit, northwestern British Columbia, Canada. Geological Fieldwork 2014, British Columbia Ministry of Energy and Mines, British Columbia Geological Survey Paper 2015-1, 59-86.
Febbo, G.E., Friedman, R.M., Kennedy, L.A., and Nelson, J.L. (2019a). U-Pb geochronology of the Mitchell deposit, northwestern British Columbia. British Columbia Ministry of Energy, Mines and Petroleum Resources, British Columbia Geological Survey, GeoFile 2019-03, 8 p.
Febbo, G.E., Kennedy, L.A., Nelson, J.L., Savell, M.J., Campbell, M.E., Creaser, R.A., Friedman, R.M., van Straaten, B.I., and Stein, H.J. (2019b). The evolution and structural modification of the supergiant Mitchell Au-Cu porphyry, northwestern British Columbia. Economic Geology, 114(2), 303-324.
Fowler B., and Wells, R. (1995). The Sulphurets Gold zone, northwestern British Colombia. In Schroeter, T.G., ed., Porphyry deposits of the northwestern Cordillera of North America: Canadian Institute of Mining, Metallurgy and Petroleum, Special Volume 46, PART B - Porphyry Copper (±Au±Mo) Deposits of the Calc-Alkalic Suite, 484-492.
G&T (2007). Preliminary Assessment on Mitchell Zone Samples (KM 1909). June 2007.
G&T (2008). Pre-Feasibility Metallurgical Testing Mitchell Zone – Kerr Sulphurets (KM 2153). September 2008.
G&T (2009). Metallurgical and Pilot Plant Testing on Samples from the Kerr-Sulphurets-Mitchell (KSM) Project (KM 2344). December 2009.
G&T (2010). Ancillary Testing Kerr Sulphurets-Mitchell-KSM Project (KM 2755). December 2010.
G&T (2010). Bench Scale and Pilot Plant Testing Kerr-Sulphurets-Mitchell Project (KM 2670), August 2010.
G&T (2010). Miscellaneous Metallurgical Testing on Samples From the KSM Project (KM 2535). March 2010.
G&T (2011). Data Reports (KM 2897). February – March 2011.
Seabridge Gold Inc. | 27-3 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
G&T (2011). Flotation and Cyanidation Testing – Mitchell Composites Years 0-10/0-20 – (KM 3081). November 28, 2011.
G&T (2011). Preliminary Metallurgical Testing on Samples from the Iron Cap Zone – KSM Project (KM 2748). January 2011.
G&T (2012). Flotation and CIL Cyanidation Testing – Kerr-Sulphurets-Mitchell Project – (KM 3080). January 10, 2012.
G&T (2012). Ore Hardness and Flotation Testing – Kerr-Sulphurets-Mitchell (KSM) Project – (KM 3174). January 6, 2012.
Golder (2011). Block Cave Mine Study. Report Number REP 0516_11. Submitted May17, 2011.
Golder (2012). Pre-Feasibility Block Cave Mine Design – Mitchell Deposit. Prepared for Seabridge Gold Inc. Submitted May 2012.
Gustafson, L.B., and Hunt, J.P. (1975). The porphyry copper deposit at El Salvador, Chile. Economic Geology, v.70, 857-912.
Hazen (2008). Comminution Testing (Project # 10724). February 2008.
IGRB (2016). Review of Water Dam, Water Management, and Tailings Storage Systems, KSM Project, British Columbia, Canada. Rev C.1. April 2016.
KCB (2009). 2008 KSM Site Investigation Report.
KCB (2010). 2009 KSM Site Investigation Report.
KCB (2011). 2010 KSM Site Investigation Report.
KCB (2012), 2012 Engineering Design Update of Tailing Management Facility, December 21, 2012.
KCB (2012a). 2012 Site Investigation Report for the Mine Area.
KCB (2012b). 2012 TMF Site Investigations.
KCB (2012c). Engineering Design Update of Tailing Management Facility.
KCB (2012d). KSM Water Storage Dam - Value Engineering Study Report.
KCB (2013a). 2012 Geotechnical Design of Rock Storage Facilities and Design of Associated Water Management Facilities (Technical Report in Support of 2012 PFS), January 29, 2013.
KCB (2013b). KSM Project. Rock Storage Facilities Design Report. July 8, 2013.
Seabridge Gold Inc. | 27-4 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
KCB (2014). KSM Project Mitchell/McTagg RSF Water Collection for Selenium Treatment. March 4, 2014.
KCB (2016a). Best Available Technology (BAT) Study for Tailing Management at the KSM Project. June 22, 2016.
KCB (2016a), 2016 Pre-Feasibility Study Update, Addendum Report, Tailing Management Facility Design – Rev. 1, September 22, 2016
KCB (2016b), 2016 Pre-Feasibility Study Update, Addendum Report – Mine Area Water Management – Rev. 1, September 27, 2016
KCB (2016c), 2016 Review of Regional Climate, 2016 Pre-Feasibility Study Update Addendum Report Tailing Management Facility Design – Rev. 1, September 22, 2016
KCB (2019a), September 2018 Site Visit TMF West Till Borrow Area Sampling and Geotechnical Laboratory Testing - Rev. 1, January 23, 2019.
KCB (2019b), Evaluation of Results from Batch 1 and 2 Monzonite Geochemical and Geotechnical Laboratory Testing Programs, March 20, 2019.
KCB (2020a) KSM 2020 Preliminary Economic Assessment, Review of PEA Mine Area Catchments – Rev. 1, February 12, 2020
KCB (2020b) KSM 2020 Preliminary Economic Assessment, Water and Waste Management - Basis of Quantities – Rev. 3, March 13, 2020
KCB (2020c) KSM 2020 Preliminary Economic Assessment, Diversion Tunnel Modifications, January 28, 2020
Kirkham, R.V. (1963). The geology and mineral deposits in the vicinity of the Mitchell and Sulphurets glaciers, Northwest British Columbia. Unpublished M.Sc. thesis: Vancouver, Canada, University of British Columbia, 142 p.
Kirkham, R.V., and Margolis, J. (1995). Overview of the Sulphurets area, northwestern British Columbia. In Schroeter, T.G., ed., Porphyry deposits of the northwestern Cordillera of North America: Canadian Institute of Mining, Metallurgy and Petroleum, Special Volume 46, PART B - Porphyry Copper (±Au±Mo) Deposits of the Calc-Alkalic Suite, pp. 473-483.
Köeppern Machinery Australia Pty Ltd. (2010). High Pressure Comminution Test Work on Processing of Mitchell Zone Ore. February 2010.
Lechner, M.J. (2007). Mitchell Creek Technical Report, Northern British Columbia, NI 43-101 Technical Report prepared for Seabridge Gold.
Lechner, M.J. (2008a). Kerr-Sulphurets Technical Report, Northern British Columbia, NI 43-101 Technical Report prepared for Seabridge Gold.
Seabridge Gold Inc. | 27-5 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Lechner, M.J. (2008b). Updated Mitchell Creek Technical Report, Northern British Columbia, NI 43-101 Technical Report prepared for Seabridge Gold.
Lechner, M.J. (2009). Updated KSM Mineral Resources, NI 43-101 Technical Report prepared for Seabridge Gold.
Lechner, M.J. (2010). January 2010 Updated KSM Mineral Resources, NI 43-101 Technical Report prepared for Seabridge.
Lechner, M.J. (2011). March 2011 Updated KSM Mineral Resources, NI 43-101 Technical Report prepared for Seabridge.
Lechner, M.J. (2014). Initial Deep Kerr Resource Estimate, British Columbia, Canada, NI 43-101 Technical Report.
MacDonald, A.J. (1993). The Iskut River Area, Northwestern British Columbia, Canada: an application of research in metallogenesis to enhance exploration success. In: MDRU Iskut River Metallogeny Project – Annual Report, Year 3, 7.1-7.37.
Margolis, J. (1993). Geology and intrusion-related copper-gold mineralization, Sulphurets, British Columbia. Unpublished Ph.D. thesis, Eugene, USA, University of Oregon, 289 p.
Metal Mine Effluent Regulations, SOR/2002-222.
Mines Act, RSBC. C. 293. (1996b).
Nelson, J. and Colpron, M. (2007). Tectonics and metallogeny of the British Columbia, Yukon and Alaskan Cordillera, 1.8 Ga to the present. Mineral Deposits of Canada: A Synthesis of Major Deposit-Types, District Metallogeny, the Evolution of Geological Provinces, and Exploration Methods. Edited by W.D. Goodfellow. Geological Association of Canada, Mineral Deposits Division, Special Publication, 5, 755-791.
Nordic Minesteel Technologies, 2016, KSM – MTT Automated Rail Ore Transportation System, May 2016.
Palacios, C., Hérail, G., Townley, B., Maksaev, V., Sepúlveda, F., de Parseval, P., Rivas, P., Lahsen, A. and Parada, M.A. (2001). The composition of gold in the Cerro Casale gold-rich porphyry deposit, Maricunga belt, northern Chile. The Canadian Mineralogist, 39(3), 907-915.
Piteau Associates (1991). Mine Rock and Overburden Piles Investigation and Design Manual: Interim Guidelines. Prepared for the British Columbia Mines Waste Rock Pile Research Committee by Piteau Associates Engineering Ltd. http://www.empr.gov.bc.ca/Mining/Permitting-Reclamation/Geotech/Documents/MinedRock+OverburdenPiles/MinedRockOverburdenPile_Investigation+DesignManual.pdf (accessed January 2013).
Seabridge Gold Inc. | 27-6 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Placer Dome Inc. (1990). Metallurgical Research Centre, Kerr Project Report No.1. October 1990.
Placer Dome Inc. (1991). Metallurgical Research Centre, Kerr Project Report No.2. April 1991.
Pocock (2009). Flocculant Screening, Gravity Sedimentation, Pulp Rheology, Vacuum Filtration and Pressure Filtration Studies. December 2009.
Pretium (2011). Snowfield Resource Increase, press release dated February 23, 2011.
Rescan (2013). Application for an Environmental Assessment Certificate/Environmental Impact Statement for the KSM Project. May 2013.
SGS Minerals Services (2010). An Investigation into the Grindability and Flotation Characteristics of Two Samples From the KSM Deposit. February 2010.
SGS Minerals Services (2010). An Investigation into the Recovery of Cyanide and Detoxification of Leach Tailing From Cyanidation of KSM Project Samples. February 2010.
Sillitoe, R.H. (2010). Porphyry copper systems. Economic geology, 105(1), 3-41.
Singer, D.A., Berger, V.I., and Moring, B.C. 2008. Porphyry copper deposits of the world: Database and grade and tonnage models. U.S. Geological Survey Open-File Report 2008-1155.
Surface Science Western, the University Of Western Ontario (2010). Sub-microscopic Gold determination of Cyanide Leach Feeds. December 21, 2010.
Surface Science Western, the University Of Western Ontario (2016). Sub-microscopic Gold Determination of Leach Residues. August 30, 2016.
Tetra Tech (2012). 2012 KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study. Document No. 1252880100-REP-R0001-05. Prepared for Seabridge Gold Inc. June 22, 2012.
Tetra Tech (2014). Feasibility Study and Technical Report Update on the Brucejack Project, Stewart, BC. Document No. 1491990100-REP-R0001-01. June 19, 2014.
Tetra Tech (2016). 2016 KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study Update and Preliminary Economic Assessment. Document No. 735-1552880100-REP-R0002-02. Prepared for Seabridge Gold Inc. October 6, 2016.
Wardrop (2008). Kerr-Sulphurets-Mitchell Preliminary Economic Assessment 2008, report written for Seabridge and later filed as NI 43-101 Technical Report, December 19, 2008.
Seabridge Gold Inc. | 27-7 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
Wardrop (2011). Kerr-Sulphurets-Mitchell (KSM) Prefeasibility Study Update 2011, report written for Seabridge and later filed as NI 43-101 Technical Report, June 15, 2011.
Water Act, RSBC. C. 483. (2003).
W.N. Brazier and Associates Inc., KSM Mining ULC 2019 Report on Fuel Prices ,Rev. 1. October 17 , 2019.
W.N. Brazier and Associates Inc., KSM Mining ULC KSM Project Cost of Electric Power 170,000 TPD 2019 PEA, Rev. 0. January 12, 2020.
W.N. Brazier and Associates Inc., KSM Mining ULC KSM 2019 PFS Update Power Supply – NTL Distribution, Rev. 2. October 17, 2019.
Seabridge Gold Inc. | 27-8 | 219221-01-RPT-002 |
KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study
Update, NI 43-101 Technical Report |
28.0 Certificates of Qualified Persons
Certificate of Qualified Person
I, Hassan Ghaffari, P.Eng., do hereby certify:
● | I am a Director of Metallurgy with Tetra Tech Inc. with a business address at Suite 1000, 10th Floor, 885 Dunsmuir Street, Vancouver, BC, V6C 1N5. |
● | This certificate applies to the technical report entitled “KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study Update, NI 43-101 Technical Report”, with an effective date of April 30, 2020 (the “Technical Report”). |
● | I am a graduate of the University of Tehran (M.A.Sc., Mining Engineering, 1990) and the University of British Columbia (M.A.Sc., Mineral Process Engineering, 2004). |
● | I am a member in good standing of the Engineers and Geoscientists British Columbia (#30408). |
● | My relevant experience includes 29 years of experience in mining and mineral processing plant operation, engineering, project studies and management of various types of mineral processing, including hydrometallurgical mineral processing for porphyry mineral deposits. |
● | I am a “Qualified Person” for the purposes of National Instrument 43-101 Standards of Disclosure for Mineral Projects (NI 43-101) for those sections of the Technical Report that I am responsible for preparing. |
● | I conducted a personal inspection of the KSM property on September 20, 2014. |
● | I am responsible for Sections 1.1, 1.2, 1.12.5, 1.12.6, 1.14, 1.16, 1.17, 2.0, 3.0, 12.3.2 (financial analysis), 18.1, 18.5, 18.6, 18.7, 18.8, 18.9, 18.12.2, 18.13, 18.14, 18.15, 21.1 and 21.2 (all other capital costs except for open pit mining, underground mining, permanent electrical power supply and distribution, energy recovery, NTL contribution and MTDT mini hydro generation station costs), 22.0, 24.0, 25.1, 25.2.5, 25.2.6, 25.3.4, 26.1 and 27.0 (only references from sections for which I am responsible) of the Technical Report. |
● | I am independent of Seabridge Gold Inc. as Independence is defined by Section 1.5 of NI 43-101. |
● | I have had involvement with the KSM property that is the subject of the Technical Report, in acting as a Qualified Person for the “KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study” dated June 22, 2012, “2016 KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study Update, Preliminary Economic Assessment” dated October 6, 2016 and the “2020 KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study and Preliminary Economic Assessment Update” dated April 30, 2020. |
● | I have read NI 43-101 and the sections of the Technical Report that I am responsible for have been prepared in compliance with NI 43-101. |
● | As of the date of this certificate, to the best of my knowledge, information and belief, the section of the Technical Report that I am responsible for contain all scientific and technical information that is required to be disclosed to make the technical report not misleading. |
Signed and dated this 9th day of November, 2020
“Original document signed and sealed by
Hassan Ghaffari, P.Eng.” |
|
Hassan Ghaffari, P.Eng.
Director of Metallurgy Tetra Tech Inc. |
Certificate of Qualified Person
I, Jianhui (John) Huang, Ph.D., P.Eng., do hereby certify:
● | I am a Senior Metallurgist with Tetra Tech Inc. with a business address at Suite 1000, 10th Floor, 885 Dunsmuir Street, Vancouver, British Columbia, V6C 1N5. |
● | This certificate applies to the technical report entitled “KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study Update, NI 43-101 Technical Report”, with an effective date of April 30, 2020 (the “Technical Report”). |
● | I am a graduate of North-East University, China (B.Eng., 1982), Beijing General Research Institute for Non-ferrous Metals, China (M.Eng., 1988), and Birmingham University, United Kingdom (Ph.D., 2000). |
● | I am a member in good standing of the Engineers and Geoscientists British Columbia (#30898). |
● | My relevant experience includes over 34 years involvement in mineral processing for base metal ores, gold and silver ores, and rare metal ores, and mineral processing plant operation and engineering including hydrometallurgical mineral processing for porphyry mineral deposits. |
● | I am a “Qualified Person” for purposes of National Instrument 43-101 Standards of Disclosure for Mineral Projects (NI 43-101) for those sections of the Technical Report that I am responsible for preparing. |
● | My most recent personal inspection of the KSM property was from June 21, 2017 to June 22, 2017. |
● | I am responsible for Sections 1.10, 1.11, 1.15, 13.0, 17.0, 19.0, 21.3 (excluding open pit and underground mining costs), 25.2.4, 25.3.5, 26.2.5 and 27.0 (only references from sections for which I am responsible) of the Technical Report. |
● | I am independent of Seabridge Gold Inc. as Independence is defined by Section 1.5 of NI 43-101. |
● | I have had involvement with the KSM property that is the subject of the Technical Report, in acting as a Qualified Person for the “Kerr-Sulphurets-Mitchell Preliminary Economic Assessment 2008”, dated December 22, 2008, the “Kerr-Sulphurets-Mitchell Preliminary Economic Assessment Addendum – 2009” dated September 8, 2009, the “Kerr-Sulphurets-Mitchell (KSM) Prefeasibility Study” dated March 31, 2010, the “Kerr-Sulphurets-Mitchell (KSM) Prefeasibility Study Update” dated June 15, 2011, “2012 KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study” dated June 22, 2012, “2016 KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study Update and Preliminary Economic Assessment” dated October 6, 2016 and the “2020 KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study and Preliminary Economic Assessment Update” dated April 30, 2020. |
● | I have read NI 43-101 and the sections of the Technical Report that I am responsible for have been prepared in compliance with NI 43-101. |
● | As of the date of this certificate, to the best of my knowledge, information and belief, the section of the Technical Report that I am responsible for contain all scientific and technical information that is required to be disclosed to make the technical report not misleading. |
Signed and dated this 9th day of November, 2020
“Original document signed and sealed by
Jianhui (John) Huang, Ph.D., P.Eng.” |
|
Jianhui (John) Huang, Ph.D., P.Eng.
Senior Metallurgist Tetra Tech Inc. |
Certificate of Qualified Person
I, Michael J. Lechner, P.Geo., RPG, CPG, do hereby certify:
● | I am an independent consultant and owner of Resource Modeling Inc., an Arizona Corporation, with a business address at 124 Lazy J Drive, PO Box 295, Stites, ID, 83552. |
● | This certificate applies to the technical report entitled “KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study Update, NI 43-101 Technical Report”, with an effective date of April 30, 2020 (the “Technical Report”). |
● | I am a graduate of the University of Montana, (B.A. Geology, 1979). |
● | I am a registered professional geologist in the State of Arizona (#37753), a Certified Professional Geologist with the American Institute of Professional Geologists (#10690), a Registered Member of the Society of Mining, Metallurgy and Exploration (#4124987) and Professional Geoscientist with the Engineers and Geoscientists British Columbia (#155344). |
● | My relevant experience includes over 40 years of work as an exploration geologist, mine geologist, engineering superintendent, and resource estimator for a variety of precious metal and base metal deposits located around the world. |
● | I am a “Qualified Person” for purposes of National Instrument 43-101 Standards of Disclosure for Mineral Projects (NI 43-101) for those sections of the Technical Report that I am responsible for preparing. |
● | My most recent personal inspection of the KSM property was from October 5, 2019 to October 7, 2019. |
● | I am responsible for Sections 1.4, 1.5, 1.6, 1.7, 5.0, 6.0, 7.0, 8.0, 9.0, 10.0, 11.0, 12.1, 12.2, 12.4.1, 14.0, 23.0 and 27.0 (only references from sections for which I am responsible) of the Technical Report. |
● | I am independent of Seabridge Gold Inc. as Independence is defined by Section 1.5 of NI 43-101. |
● | I have had involvement with the KSM property that is the subject of the Technical Report, in acting as a Qualified Person for the following reports: |
– | “Mitchell Creek Technical Report, Northern British Columbia, NI 43-101 Technical Report”, April 6, 2007 |
– | “Kerr-Sulphurets Technical Report, Northern British Columbia, NI 43-101 Technical Report” February 29, 2008 |
– | “Updated Mitchell Creek Technical Report, Northern British Columbia” dated March 27, 2008. |
– | “Kerr-Sulphurets-Mitchell Preliminary Economic Assessment 2008”, dated December 22, 2008. |
– | “Kerr-Sulphurets-Mitchell Preliminary Economic Assessment Addendum – 2009” dated September 8, 2009 |
– | “January 2010 Updated KSM Mineral Resources” dated January 25, 2010 |
– | “Kerr-Sulphurets-Mitchell (KSM) Prefeasibility Study” dated March 31, 2010 |
– | “Kerr-Sulphurets-Mitchell (KSM) Prefeasibility Study Update” dated June 15, 2011 |
– | "NI 43-101 Technical Report of Initial Deep Kerr Resource, British Columbia, Canada", dated March 31, 2014. |
– | “2016 KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study Update and Preliminary Economic Assessment” dated October 6, 2016. |
– | “2020 KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study and Preliminary Economic Assessment Update” dated April 30, 2020. |
● | I have read NI 43-101 and the sections of the Technical Report that I am responsible for have been prepared in compliance with NI 43-101. |
● | As of the date of this certificate, to the best of my knowledge, information and belief, the section of the Technical Report that I am responsible for contain all scientific and technical information that is required to be disclosed to make the technical report not misleading. |
Signed and dated this 9th day of November, 2020
“Original document signed and sealed by
Michael J. Lechner, P.Geo., RPG, CPG” |
|
Michael J. Lechner, P.Geo., RPG, CPG
President Resource Modeling Inc. |
Certificate of Qualified Person
I, James H. Gray, P.Eng., do hereby certify:
● | I am a Mining Engineer with Moose Mountain Technical Services with a business address at #210 1510 2nd Street North, Cranbrook, British Columbia, V1C 3L2. |
● | This certificate applies to the technical report entitled “KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study Update, NI 43-101 Technical Report”, with an effective date of April 30, 2020 (the “Technical Report”). |
● | I am a graduate of the University of British Columbia, (Bachelor of Applied Science – Mineral Engineering, 1975). |
● | I am a member in good standing of Engineers and Geoscientists British Columbia (#11919). |
● | My relevant experience includes mine operation, supervision, and mining engineering in North America, South America, Australia, Eastern Europe, and Greenland. |
● | I am a “Qualified Person” for purposes of National Instrument 43-101 Standards of Disclosure for Mineral Projects (NI 43-101) for those sections of the Technical Report that I am responsible for preparing. |
● | My most recent personal inspection of the KSM property was from June 21 to 22, 2017. |
● | I am responsible for open pit mining for Sections 1.9, 1.12, 1.14, 1.15, 12.3, 15.0, 16.0, 18.0, 21.0, 25.0 and 26.0 as well as MTT and rail systems for Sections 18.0, 21.0, 25.0 and 26.0 and infrastructure tunnels for Sections 18.0, 21.0, 25.0 and 26.0. |
● | I am independent of Seabridge Gold Inc. as Independence is defined by Section 1.5 of NI 43-101. |
● | I have had previous involvement with the KSM property that is the subject of the Technical Report, in acting as a Qualified Person for the “Kerr-Sulphurets-Mitchell Preliminary Economic Assessment 2008”, dated December 22, 2008, the “Kerr-Sulphurets-Mitchell Preliminary Economic Assessment Addendum – 2009” dated September 8, 2009, the “Kerr-Sulphurets-Mitchell (KSM) Prefeasibility Study” dated March 31, 2010, the “Kerr-Sulphurets-Mitchell (KSM) Prefeasibility Study Update” dated June 15, 2011, the “2012 KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study” dated June 22, 2012 and amended November 11, 2014, “2016 KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study Update and Preliminary Economic Assessment” dated October 6, 2016 and the “2020 KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study and Preliminary Economic Assessment Update” dated April 30, 2020. |
● | I have read the NI 43-101 and the sections of the Technical Report that I am responsible for have been prepared in compliance with the NI 43-101. |
● | As of the date of this certificate, to the best of my knowledge, information and belief, the section of the Technical Report that I am responsible for contain all scientific and technical information that is required to be disclosed to make the technical report not misleading. |
Signed and dated this 9th day of November, 2020
“Original document signed and sealed by
James H. Gray, P.Eng.” |
|
James H. Gray, P.Eng.
Principal Mining Engineer Moose Mountain Technical Services |
Certificate of Qualified Person
I, Ross David Hammett, Ph.D., P.Eng., do hereby certify:
● | I am a Senior Engineer and Principal with Golder Associates Ltd. with a business address at Suite 200, 2920 Virtual Way, Vancouver, British Columbia, V5M 0C4. |
● | This certificate applies to the technical report entitled “KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study Update, NI 43-101 Technical Report”, with an effective date of April 30, 2020 (the “Technical Report”). |
● | I am a graduate of James Cook University of North Queensland (Ph.D., 1976; M.Eng.Sc., 1972; B.E Civil, 1970). |
● | I am a member in good standing of the Engineers and Geoscientists British Columbia (# 11020). |
● | I have 44 years of experience in mining and civil engineering. I have provided consulting services for more than 150 underground mining projects and has provided services related to mine planning, mining method selection, mine design, geotechnical studies, support designs, blasting, backfill, caving mechanics, rock stress control, geohydrology, mine dewatering, mining systems, mining automation, and environmental aspects of mining. |
● | I am a “Qualified Person” for purposes of National Instrument 43-101 Standards of Disclosure for Mineral Projects (NI 43-101) for those sections of the Technical Report that I am responsible for preparing. |
● | My most recent personal inspection of the KSM property was on September 12, 2017 to September 15, 2017. |
● | I am responsible for underground mining aspects of Sections 1.9, 12.3.1, 15.3, 15.4, 15.5, 16.1, 16.3, 16.4, 21.2 (underground mining costs), 21.3 (underground mining costs except for underground crushers and conveyors and underground electrical system), 25.2.3.2, 25.3.2, 26.2.3 and 27.0 (only references from sections for which I am responsible) of the Technical Report. |
● | I am independent of Seabridge Gold Inc. as Independence is defined by Section 1.5 of NI 43-101. |
● | I have had involvement with the KSM property that is the subject of the Technical Report, in acting as a Qualified Person for the “2016 KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study Update and Preliminary Economic Assessment” dated October 6, 2016 and the “2020 KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study and Preliminary Economic Assessment Update” dated April 30, 2020. |
● | I have read NI 43-101 and the sections of the Technical Report that I am responsible for have been prepared in compliance with NI 43-101. |
● | As of the date of this certificate, to the best of my knowledge, information and belief, the section of the Technical Report that I am responsible for contain all scientific and technical information that is required to be disclosed to make the technical report not misleading. |
Signed and dated this 9th day of November, 2020
“Original document signed and sealed by
Ross D. Hammett Ph.D, P.Eng.” |
|
Ross D. Hammett Ph.D, P.Eng
Senior Engineer & Principal Golder Associates Ltd. |
Certificate of Qualified Person
I, Derek Kinakin, P.Geo., P.G., do hereby certify:
● | I am a Senior Engineering Geologist with BGC Engineering Inc. with a business address at 234 St. Paul Street, Kamloops, British Columbia, V2C 6G4. |
● | This certificate applies to the technical report entitled “KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study Update, NI 43-101 Technical Report”, with an effective date of April 30, 2020 (the “Technical Report”). |
● | I am a graduate of Simon Fraser University (B.Sc. (Hons), 2002; M.Sc., 2005). |
● | I am a member in good standing of Engineers and Geoscientists British Columbia (#32720). |
● | My relevant experience includes 18 years of rock mechanics research, slope stability assessments, and slope designs for open pit mines in Canada, US, and Africa. |
● | I am a “Qualified Person” for purposes of National Instrument 43-101 Standards of Disclosure for Mineral Projects (NI 43-101) for those sections of the Technical Report that I am responsible for preparing. |
● | My most recent personal inspection of the KSM property was August 13, 2018 to August 17, 2018. |
● | I am responsible for Section 1.12.1, 16.2.5, 26.2.2 and 27.0 (only references from sections for which I am responsible) of the Technical Report. |
● | I am independent of Seabridge Gold Inc. as Independence is defined by Section 1.5 of NI 43-101. |
● | I have had involvement with the KSM property that is the subject of the Technical Report, in acting as a Qualified Person for the “2016 KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study Update and Preliminary Economic Assessment” dated October 6, 2016 and the “2020 KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study and Preliminary Economic Assessment Update” dated April 30, 2020. |
● | I have read NI 43-101 and the sections of the Technical Report that I am responsible for have been prepared in compliance with NI 43-101. |
● | As of the date of this certificate, to the best of my knowledge, information and belief, the section of the Technical Report that I am responsible for contain all scientific and technical information that is required to be disclosed to make the technical report not misleading. |
Signed and dated this 9th day of November, 2020
“Original document signed and sealed by
Derek Kinakin, P.Geo., P.G.” |
|
Derek Kinakin, P.Geo., P.G.
Senior Engineering Geologist BGC Engineering Inc. |
Certificate of Qualified Person
I, J. Graham Parkinson, P.Geo., do hereby certify:
● | I am a Geoscientist with Klohn Crippen Berger Ltd. with a business address at Suite 500, 2955 Virtual Way, Vancouver, British Columbia, V5M 4X6. |
● | This certificate applies to the technical report entitled “KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study Update, NI 43-101 Technical Report”, with an effective date of April 30, 2020 (the “Technical Report”). |
● | I am a graduate of the University of British Columbia, (Bachelor’s Degree – Physics, 1978), and the University of Alberta (Special Certificate – Geophysics, 1984). |
● | I am a member in good standing of the Engineers and Geoscientists British Columbia (#19008). |
● | My relevant experience includes 24 years with Klohn Crippen and Klohn Crippen Berger engaged in the evaluation and development of mine waste and water management facilities; involvement in over 20 mine waste facilities; involvement in a number of Environmental Impact Assessments, Baseline Studies, Mine Waste Facility Site Investigations, and the design of several major mine tailings dams; and 12 years of experience in engineering and exploration geophysics for the mining, engineering, and petroleum industries. |
● | I am a “Qualified Person” for purposes of National Instrument 43-101 Standards of Disclosure for Mineral Projects (NI 43-101) for those sections of the Technical Report that I am responsible for preparing. |
● | My most recent personal inspection of the KSM property was on June 7th, 2020 as well as site visits during 2007, 2008, 2009, 2012, 2014, 2016 and 2018. |
● | I am responsible for Section 1.12.2, 1.12.3, 1.12.7 (water management tunnels), 18.2, 25.2.5.3, 25.3.3, 26.2.4, 26.2.6, 26.2.7, 26.2.8 and 27.0 (only references from sections for which I am responsible) of the Technical Report. |
● | I am independent of Seabridge Gold Inc. as Independence is defined by Section 1.5 of NI 43-101. |
● | I have had involvement with the KSM property that is the subject of the Technical Report, in acting as a Qualified Person for the “Kerr-Sulphurets-Mitchell Preliminary Economic Assessment 2008”, dated December 22, 2008, the “Kerr-Sulphurets-Mitchell Preliminary Economic Assessment Addendum – 2009” dated September 8, 2009, the “Kerr-Sulphurets-Mitchell (KSM) Prefeasibility Study” dated March 31, 2010, the “Kerr-Sulphurets-Mitchell (KSM) Prefeasibility Study Update” dated June 15, 2011, the “KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study” dated June 22, 2012, the “2016 KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study Update and Preliminary Economic Assessment” dated October 6, 2016 and the “2020 KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study and Preliminary Economic Assessment Update” dated April 30, 2020. |
● | I have read NI 43-101 and the sections of the Technical Report that I am responsible for have been prepared in compliance with NI 43-101. |
● | As of the date of this certificate, to the best of my knowledge, information and belief, the section of the Technical Report that I am responsible for contain all scientific and technical information that is required to be disclosed to make the technical report not misleading. |
Signed and dated this 9th day of November, 2020
“Original document signed and sealed by
J. Graham Parkinson, P.Geo.” |
|
J. Graham Parkinson, P.Geo.
Senior Geoscientist Klohn Crippen Berger Ltd. |
Certificate of Qualified Person
I, Neil Brazier, P.Eng., do hereby certify:
● | I am a Principal with WN Brazier Associates Inc. with a business address at #8–3471 Regina Ave., Richmond, BC. V6X 2K8 |
● | This certificate applies to the technical report entitled “KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study Update, NI 43-101 Technical Report”, with an effective date of April 30, 2020 (the “Technical Report”). |
● | I am a graduate of the University of Saskatchewan (B.Sc. Electrical Engineering, 1969). |
● | I am a member in good standing of the Engineers and Geoscientists British Columbia (#8337). |
● | My relevant experience includes engineering, construction supervision, and commissioning of a large number of diesel and combustion turbine power plants, high-voltage transmission lines and substations for mining applications. |
● | I am a “Qualified Person” for purposes of National Instrument 43-101 (NI 43-101) for those sections of the Technical Report that I am responsible for preparing. |
● | My most recent personal inspection of the KSM property was September 1, 2013 to September 4, 2013. |
● | I am responsible for Sections 1.12.8, 18.10, 18.11, portions of Section 21.1 and 21.2 related to permanent electrical power supply and distribution, energy recovery, NTL contribution, and MTDT mini hydro generation station costs of the Technical Report and 27.0 (only references from sections for which I am responsible) of the Technical Report. |
● | I am independent of Seabridge Gold Inc. as Independence is defined by Section 1.5 of NI 43-101. |
● | I have had involvement with the KSM property that is the subject of the Technical Report, in acting as a Qualified Person for the “Kerr-Sulphurets-Mitchell Preliminary Economic Assessment 2008”, dated December 22, 2008, the “Kerr-Sulphurets-Mitchell Preliminary Economic Assessment Addendum – 2009” dated September 8, 2009, the “Kerr-Sulphurets-Mitchell (KSM) Prefeasibility Study” dated March 31, 2010, the “Kerr-Sulphurets-Mitchell (KSM) Prefeasibility Study Update” dated June 15, 2011, the “KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study” dated June 22, 2012, the “2016 KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study Update and Preliminary Economic Assessment” dated October 6, 2016 and the “2020 KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study and Preliminary Economic Assessment Update” dated April 30, 2020. |
● | I have read NI 43-101 Standards of Disclosure for Mineral Projects (NI 43–101) and the sections of the Technical Report that I am responsible for have been prepared in compliance with NI 43-101. |
● | As of the date of this certificate, to the best of my knowledge, information and belief, the section of the Technical Report that I am responsible for contain all scientific and technical information that is required to be disclosed to make the technical report not misleading. |
Signed and dated this 9th day of November, 2020
“Original document signed and sealed by
Neil Brazier, P.Eng.” |
|
Neil Brazier, P.Eng.
Principal WN Brazier Associates Inc. |
Certificate of Qualified Person
I, Brendon Masson, do hereby certify:
● | I am a Senior Project Engineer of Engineering with McElhanney Consulting Services Ltd. with a business address at Suite 100, 402 – 11th Ave SE, Calgary, Alberta T2G 0Y4. |
● | This certificate applies to the technical report entitled “KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study Update, NI 43-101 Technical Report”, with an effective date of April 30, 2020 (the “Technical Report”). |
● | I am a graduate of the University of University of New Brunswick (B.Sc., Civil Engineering, 2007). |
● | I am a member in good standing of the Association of Professional Engineers and Geoscientists of British Columbia (#36610). |
● | My relevant experience is 15 years of location, survey, design, and construction of roads in the Forestry, Mining, and Oil & Gas sectors. |
● | I am a “Qualified Person” for purposes of National Instrument 43-101 (NI 43-101) for those sections of the Technical Report that I am responsible for preparing. |
● | My most recent personal inspection of the KSM property was on September 13, 2012. |
● | I am responsible for Sections 1.12.4, 18.12 (except 18.12.2) and 27 (only references from sections for which I am responsible) the Technical Report. |
● | I am independent of Seabridge Gold Inc. as Independence is defined by Section 1.5 of NI 43-101. |
● | I have had involvement with the KSM property that is the subject of the Technical Report, in acting as a Qualified Person for the “2020 KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study and Preliminary Economic Assessment Update” dated April 30, 2020. |
● | I have read NI 43-101 Standards of Disclosure for Mineral Projects (NI 43–101) and the sections of the Technical Report that I am responsible for have been prepared in compliance with NI 43-101. |
● | As of the date of this certificate, to the best of my knowledge, information and belief, the section of the Technical Report that I am responsible for contain all scientific and technical information that is required to be disclosed to make the technical report not misleading. |
Signed and dated this 9th day of November, 2020
“Original document signed and sealed by
Brendon Masson, P.Eng.” |
|
Brendon Masson, P.Eng.
Senior Project Engineer McElhanney Consulting Services Ltd. |
Certificate of Qualified Person
I, Rolf Schmitt, P.Geo., do hereby certify:
● | I am a Technical Director with ERM Consultants Canada Ltd. with a business address at 1500-1111 West Hastings St., Vancouver, British Columbia, V6E 2J3. |
● | This certificate applies to the technical report entitled “KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study Update, NI 43-101 Technical Report”, with an effective date of April 30, 2020 (the “Technical Report”). |
● | I graduated with a Master of Science in Geology from the University of Ottawa in 1993. In addition, I have obtained a Master of Science, Regional Planning from the University of British Columbia, 1985, and Honours Bachelor of Science, Geology, from the University of British Columbia in 1977. |
● | I am a member in good standing of the Engineers and Geoscientists British Columbia (#19824). |
● | I have worked as a geologist, project manager, technical director and senior policy advisor for a total of 42 years since my graduation from university. Key areas of experience of relevance to the KSM project include: Senior Exploration Geologist, Kidd Creek Mines (northwest BC), Research Exploration Geochemist (Geological Survey of Canada), Senior Land Use Geologist and Mineral Policy Specialist (BC Ministry of Energy, Mines and Petroleum Resources), Technical Director and Project Manager (Rescan and ERM), delivering mine Environmental Assessment Projects in BC, permitting major mines in BC and undertaking mine ESG Due Diligence assignments across Canada and internationally as NI 43-101 QP. I have worked on multiple mine assignments through all phases of life-of-mine as part of owners’ exploration/ engineering/ environmental teams and as a senior strategic advisor. |
● | I am a “Qualified Person” for purposes of National Instrument 43-101 (NI 43-101) for those sections of the Technical Report that I am responsible for preparing. |
● | My most recent personal inspection of the KSM property was on July 12, 2019. |
● | I am responsible for Sections 1.13, 20.0, 26.2.6 (water balance, temporary water treatment plants, and geochemistry database) and 27.0 (only references from sections for which I am responsible) of the Technical Report. |
● | I am independent of Seabridge Gold Inc. as Independence is defined by Section 1.5 of NI 43-101. |
● | I have had involvement with the KSM property that is the subject of the Technical Report, in acting as a Qualified Person for the “2020 KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study and Preliminary Economic Assessment Update” dated April 30, 2020. |
● | I have read NI 43-101 Standards of Disclosure for Mineral Projects (NI 43–101) and the sections of the Technical Report that I am responsible for have been prepared in compliance with NI 43-101. |
● | As of the date of this certificate, to the best of my knowledge, information and belief, the section of the Technical Report that I am responsible for contain all scientific and technical information that is required to be disclosed to make the technical report not misleading. |
Signed and dated this 9th day of November, 2020
“Original document signed and sealed by
Rolf Schmitt, P.Geo.” |
|
Rolf Schmitt, P.Geo.
Technical Director, Regulatory and Permitting ERM Consultants Canada Ltd. |
Certificate of Qualified Person
I, Kirk Hanson, P.E. do hereby certify:
● | I, Kirk Hanson, P.E., am employed as a Technical Director Open Pit Mining with Wood Group USA Mining Consulting SLC engineering at the company office at 10876 S river Front Pkwy #250, South Jordan, UT 84095, United States. |
● | This certificate applies to the technical report entitled “KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study Update, NI 43-101 Technical Report”, with an effective date of April 30, 2020 (the “Technical Report”). |
● | I am registered as a Professional Engineer in the State of Nevada (#10640) and in the State of Alaska (#12126). I graduated with a B.Sc. degree from Montana Tech of the University of Montana, Butte, Montana in 1989 and from Boise State University, Boise, Idaho with a MBA degree in 2004. |
● | I have practiced my profession for 31 years. I was Chief Engineer at Barrick’s Goldstrike operation, where I was responsible for all aspects of open-pit mining, mine designs, mine expansions and strategic planning. After earning an MBA in 2004, I was assistant manager of operations and maintenance for the largest road department in Idaho. In 2007, I joined AMEC (now Wood) as a principal mining consultant. Over the past 13 years, I have been the mining lead for multiple scoping, pre-feasibility, and feasibility studies. I have also done financial modelling for multiple mines as part of completing the scoping, pre-feasibility and feasibility studies. |
● | As a result of my experience and qualifications, I am a Qualified Person as defined in National Instrument 43–101 Standards of Disclosure for Mineral Projects (NI 43–101) for those sections of the Technical Report that I am responsible for preparing. |
● | I have not completed a personal inspection of the KSM property. |
● | I am responsible for Section 1.8, 12.3.2 (except financial analysis), 12.4.2 and 25.2.1 of the Technical Report. |
● | I am independent of Seabridge Gold Inc. as Independence is defined by Section 1.5 of NI 43-101. |
● | I have had involvement with the KSM property that is the subject of the Technical Report, in acting as a Qualified Person for the “2020 KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study and Preliminary Economic Assessment Update” dated April 30, 2020. |
● | I have read NI 43-101 and the sections of the Technical Report that I am responsible for have been prepared in compliance with NI 43-101. |
● | As of the effective date of the Technical Report, to the best of my knowledge, information, and belief, the sections of the Technical Report that I am responsible for contain all scientific and technical information that is required to be disclosed to make the Technical Report not misleading. |
Signed and dated this 9th day of November, 2020
“Original document signed and sealed by
Kirk Hanson, P.E.” |
|
Kirk Hanson, P.E.
Technical Director, Open Pit Mining Wood Canada Limited |
Certificate of Qualified Person
I, William E. Threlkeld, P.Geo., PG, do hereby certify:
● | I am the Senior Vice President, Exploration of Seabridge Gold Inc. with a business address at Suite 400, 106 Front Street East, Toronto, Ontario M5A 1E1 |
● | This certificate applies to the technical report entitled “KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study Update, NI 43-101 Technical Report”, with an effective date of April 30, 2020 (the “Technical Report”). |
● | I am a graduate of the University of Western Ontario, (M.Sc. Economic Geology, 1982). |
● | I am a registered professional geoscientist with the Engineers and Geoscientists British Columbia (#155516) and a professional geologist in the State of Washington (#790). |
● | My relevant experience includes over 40 years of professional experience. |
● | I am a “Qualified Person” for purposes of National Instrument 43-101 Standards of Disclosure for Mineral Projects (NI 43–101) for those sections of the Technical Report that I am responsible for preparing. |
● | My most recent personal inspection of the Property was from September 3, 2019 to September 8, 2019. |
● | I am responsible for Sections 1.3 and 4.0 of the Technical Report. |
● | I am not independent of Seabridge Gold Inc. as Independence is defined by Section 1.5 of NI 43-101. |
● | I have had involvement with the KSM property that is the subject of the Technical Report, in acting as a Qualified Person for the “2020 KSM (Kerr-Sulphurets-Mitchell) Prefeasibility Study and Preliminary Economic Assessment Update” dated April 30, 2020. |
● | I have read NI 43-101 and the sections of the Technical Report that I am responsible for have been prepared in compliance with NI 43-101. |
● | As of the date of this certificate, to the best of my knowledge, information and belief, the section of the Technical Report that I am responsible for contain all scientific and technical information that is required to be disclosed to make the technical report not misleading. |
Signed and dated this 9th day of November, 2020
“Original document signed and sealed by
William E. Threlkeld, P.Geo., PG” |
|
William E. Threlkeld, P.Geo., PG
Seabridge Gold Inc |
Exhibit 99.2
News Release
Trading Symbols: TSX: SEA | For Immediate Release |
NYSE: SA | November 18, 2020 |
Seabridge Gold Refiles Technical Report
Toronto, Canada: Seabridge Gold Inc. (“Seabridge” or the “Company”) (TSX:SEA) (NYSE:SA) reported today that it has refiled its Technical Report prepared under National Instrument 43-101 (“NI 43-101”) for Seabridge’s KSM Project that was effective April 30, 2020. The refiled Technical Report restates the Pre-Feasibility Study (the “2016 PFS”) in the original Technical Report it filed earlier this year (the “Original Report”) but omits the Preliminary Economic Assessment that was disclosed by Seabridge on April 27, 2020 (the “2020 PEA”).
The 2020 PEA presented an economic analysis of an alternative conceptual development scenario for the Project, with a significantly higher percentage of underground mining, which would reduce the Project’s environmental impact. As disclosed in the 2020 PEA, the 2020 PEA included inferred mineral resources discovered after the 2016 PFS was disclosed by Seabridge, together with measured and indicated mineral resources that had also been classified as mineral reserves in the 2016 PFS.
In discussions with staff of the Ontario Securities Commission (“OSC”), OSC staff has advised Seabridge that each of the 2016 PFS and the 2020 PEA, on its own, is a valid and acceptable study under NI-43-101. However, OSC staff have concerns with the presentation of both studies at the same time because there are different development plans in each study and some of the same mineralized material is used in both plans. In OSC Staff’s view, concurrent, mutually exclusive mine development plans cannot be disclosed together as they cannot simultaneously be implemented or, in other words, the plans are inconsistent with each other. OSC staff has required Seabridge to choose whether to present the 2016 PFS or the 2020 PEA as its only current study in a revised Technical Report.
As the 2016 PFS forms the basis for Federal and Provincial environmental approvals for the KSM Project, Seabridge has chosen to present the 2016 PFS as the only current economic analysis for the Project. Seabridge has therefore refiled the Technical Report under NI 43-101 to omit the 2020 PEA. All other aspects of the Technical Report remain as originally filed, including the 2016 PFS and all mineral reserves and the 2019 mineral resource estimate currently disclosed by Seabridge under NI-43-101. Seabridge advises readers to rely only on the refiled Technical Report and the 2016 PFS it contains.
About Seabridge: Seabridge holds a 100% interest in several North American gold projects. The Company’s principal assets are the KSM and Iskut Projects located near Stewart, British Columbia, Canada and the Courageous Lake gold project located in Canada’s Northwest Territories. For a full breakdown of Seabridge’s mineral reserves and mineral resources by category, please visit the Company’s website at http://www.seabridgegold.net/resources.php.
None of the Toronto Stock Exchange, New York Stock Exchange, or their Regulation Services Providers accepts responsibility for the adequacy or accuracy of this release.
All reserve and resources reported by Seabridge were estimated in accordance with the Canadian National Instrument 43-101 and the Canadian Institute of Mining and Metallurgy Classification system. These standards differ significantly from the requirements of the U.S. Securities and Exchange Commission. Mineral resources which are not mineral reserves do not have demonstrated economic viability.
ON BEHALF OF THE BOARD | |
Rudi P. Fronk | |
Chairman & C.E.O. |
For further information, please contact:
Rudi P. Fronk, Chairman and C.E.O.
Tel: (416) 367-9292 • Fax: (416) 367-2711
Email: info@seabridgegold.net