Table of Contents

​

​

​

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, D.C. 20549

FORM 10-K

​

​

For the fiscal year ended December 31, 2021

​

​

For the transition period from ______to _______

Commission File Number: 001-35737

NORTHWEST BIOTHERAPEUTICS, INC.

(Exact name of registrant as specified in its charter)

​

​

4800 Montgomery Lane, Suite 800, Bethesda, MD 20814

(Address of principal executive offices) (Zip Code)

(240) 497-9024

(Registrant’s telephone number)

N/A

(Former Name, Former Address and Former Fiscal Year, if changed since last report)

Securities registered pursuant to Section 12(b) of the Act:

​

Securities registered pursuant to Section 12(g) of the Act: None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes   ☐   No    ☒

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes   ☐   No    ☒

Indicate by check mark whether the registrant: (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 (the “Exchange Act”) during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes    ☒     No   ☐

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes    ☒    No   ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company, or an emerging growth company. See definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company” and “emerging growth company” in Rule 12b-2 of the Exchange Act.:

​

​

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

Indicate by check mark whether the registrant has filed a report on and attestation to its management's assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report. ☒

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes ☐  No ☒

The aggregate market value of the voting and non-voting common equity held by non-affiliates of the registrant was approximately $1,212,762,000 on June 30, 2021.

As of February 25, 2022, the registrant had 960,022,117 shares of common stock outstanding.

​

DOCUMENTS INCORPORATED BY REFERENCE

The information required by Part III of this Report, to the extent not set forth herein, is incorporated herein by reference from the registrant’s definitive proxy statement relating to the Annual Meeting of Stockholders to be held in 2022.

​

​

Table of Contents

NORTHWEST BIOTHERAPEUTICS, INC.

FORM 10-K

TABLE OF CONTENTS

​

​

​

2

Table of Contents

Table of Contents

On August 28, 2020, we acquired Flaskworks, LLC (“Flaskworks”), a company that has developed a system designed to close and automate the manufacturing of cell therapy products such as DCVax®. We acquired 100% of the ownership, and Flaskworks became a wholly-owned subsidiary of the Company. Flaskworks was previously owned by its technical founders and Corning Inc. The technical team from Flaskworks joined us as part of the Acquisition. It is anticipated that the Flaskworks system will enable substantial scale-up of production volumes of DCVax products and substantial reduction of production costs. Our buildout of the Sawston, UK facility has been designed to proceed in phases, as modules, both for efficiency in the timing of capital costs and to allow flexibility in operations and usage. We anticipate that implementation of the Flaskworks system will enable certain phases of the buildout to be simplified and streamlined.  For further details on the financial aspects of the acquisition, please see Item 8 Note 5 below.

Our second product, DCVax®-Direct, is designed to treat inoperable solid tumors. A 40-patient Phase I trial has been completed, and included treatment of a diverse range of more than a dozen types of cancers. We plan to work on preparations for Phase II trials of DCVax-Direct as resources permit.

The DCVax Technology

Our platform technology, DCVax, is a personalized immune therapy that uses a patient’s own dendritic cells, or DCs, the master cells of the immune system, as the therapeutic agent. The patient’s DCs are obtained through a blood draw, or leukapheresis. The DCs are then activated and loaded with biomarkers (“antigens”) from the patient’s own tumor. For DCVax-L, the antigen loading process takes place during the manufacturing of the product. For DCVax-Direct, the antigen loading process takes place in situ in the tumor after the product is directly injected into the patient’s inoperable tumor. The loading of antigens into the DCs “educates” the DCs about what the immune system needs to target.

Manufacturing of DCVax

We use a batch manufacturing technology for our DCVax products, and we believe this manufacturing approach is a key part of the practicality of our product and its economic feasibility. Generally, we are able to produce enough doses for the patient’s treatment regimen through just one manufacturing process. When a batch of DCVax product has been made, we then cryopreserve it.

Both of these technologies, the personalized batch manufacturing for each patient and the cryopreservation, are essential elements of our manufacturing model and product economics. Together, they enable us to usually incur the high costs of manufacturing just one time for each patient, and then store the multi-year or multi-dose quantity of product, frozen, in single doses. This makes DCVax effectively an “off the shelf” product for the patient after the initial manufacturing, even though it is personalized, and we anticipate that this will enable the pricing of DCVax to be in line with other new cancer drugs. We also believe that both economies of scale and automation will further enhance the product economics. The manufacturing process today is also rapid: about 8 days for DCVax-L, and 7 days for DCVax-Direct, followed by quality control and release testing (including a sterility test that may take a couple of weeks).

As previously reported, we have been developing a manufacturing facility in Sawston, U.K. To date, our production of dendritic cell vaccine products in the UK has been taking place in a GMP (clean room) facility in London, with a capacity of about 4 - 6 patients per month. The Sawston facility contains a total of 88,345 square feet on two floors. The initial production capacity comprises two manufacturing suites, occupying approximately 4,400 square feet on the ground floor. These two suites, together with some additional support and storage space, have anticipated potential capacity to produce dendritic cell vaccines for about 40 to 45 patients per month, or approximately 450 to 500 patients annually. The buildout of Phase 1A of the facility was completed in Q4 2020.

During 2021, work continued for technology transfer from the London facility to the Sawston facility, recruitment of contract technical personnel for Sawston, development of some 1,000 regulatory documents for operations in the Sawston facility, and applications to both the Human Tissue Authority (HTA) and the MHRA for inspections of the Sawston facility and its operations, and issuance of licenses for manufacturing in the facility. These applications and inspections were successfully completed.  The HTA license was issued in October 2021 and the MHRA license was issued in December 2021. Following some required validation work after the licenses were issued, production of DCVax-L began this month.

4

Table of Contents

The initial production capacity will occupy only a small fraction of the total space in the Sawston facility. In light of this, and in light of our obligation in connection with the buildout loan from the Cambridge development authority to make the Sawston facility benefit the regional business ecosystem and not just us, on December 31, 2021 we entered into a sub-lease for a small portion of the space to our contract manufacturer, Advent BioServices.  For further details, please see Note 10 below. It is anticipated that, as and when feasible, the subleased space may enable some production of third party cell therapy products Such production of other products will fulfill the loan-related commitment to the Cambridge authority, will help support the capital-intensive Sawston facility costs and, in light of the growing demand for cell therapy manufacturing capacity, could substantially increase the asset value of the Sawston facility.

All of the development activities for the Sawston facility have been carried out or managed by Advent BioServices, who is also the contract operator of the facility.

Intellectual Property and Orphan Drug Designation

We have an integrated strategy for protection of our technology through both patents and other mechanisms, such as Orphan Drug status. As of December 31, 2021, we have 204 issued patents and 59 pending patent applications worldwide, grouped into 11 patent families. Of these, 200 issued patents and 47 pending patent applications directly relate to our DCVax products. In the United States and Europe, some of our patents and applications relate to compositions and the use of products, while other patents and applications relate to other aspects such as manufacturing and quality control. For example, in the United States, we have seven issued and five pending patent applications that relate to the composition and/or use of our DCVax products. We also have other U.S patents and applications that cover, among other things, quality control for DCVax and an automated system which we believe will help enable the scale-up of production for large numbers of patients on a cost-effective basis. Similarly, in Europe, we have seven patents issued by and eight pending patent applications with the European Patent Office ("EPO") that cover our DCVax products, and other patents and applications that cover aspects such as manufacturing and quality control, and the automated system. In Japan, we have nine issued patents and three pending patent applications relating to our DCVax products, as well as manufacturing related patents. Patents have been granted or are pending in other foreign jurisdictions which may be potential future markets for our DCVax products.

During 2021, seven new patents were issued to us as part of our worldwide patent portfolio. The newly issued patents cover methods for manufacturing dendritic cells related to our DCVax products, as well as encompassing certain methods of use and compositions that may be potential future markets for related DCVax products.

Additionally, with the acquisition of Flaskworks, we gained ownership of a portfolio of patents and patent applications which include those held by Flaskworks as well as patents and patent applications exclusively licensed by Flaskworks from Northeastern University. The portfolio includes a total of thirteen patent families, with issued patents and pending applications worldwide. Collectively these patents and patent applications cover key aspects of the design and function of automated cell culture systems.

During 2020, three new patents were issued to us as part of our worldwide patent portfolio. The newly issued patents cover methods for manufacturing dendritic cells related to our DCVax products, as well as encompassing certain methods of use and compositions that may be potential future markets for related DCVax products.

The expiration dates of the issued U.S. patents involved in our current business range from 2022 to 2036, and pending applications may involve longer time periods. The expiration dates of the issued European patents involved in our current business range from 2022 to 2024, and pending applications may involve longer time periods. For some of the earlier dates, we plan to seek extensions of the patent life, and believe we have reasonable grounds for doing so.

In addition to our patent portfolio, we have obtained Orphan Drug designation for our lead product, DCVax-L for glioma brain cancers. Such designation brings with it a variety of benefits, including potential market exclusivity for seven years in the U.S. and ten years in Europe if our product is the first of its type to reach the market.

This market exclusivity applies regardless of patents (i.e., even if the company that developed it has no patent coverage on the product). In addition, the time period for such market exclusivity does not begin to run until product sales begin. In contrast, the time period of a patent begins when the patent is filed and runs down during the years while the product is going through development and clinical trials.

5

Table of Contents

Competition

The biotechnology and biopharmaceutical industries are characterized by rapidly advancing technologies, intense competition and a strong emphasis on proprietary products. A large and growing number of companies are actively involved in the research and development of immune therapies or cell-based therapies for cancer (including Juno, Kite, Bellicum, Agenus, Asterias, Immunicum, Sotio, AiVita and many others). In addition, many big pharma companies (including BMS, Merck, Pfizer, Astra Zeneca, Roche and others) are rapidly commercializing checkpoint inhibitor drugs to “take the brakes off” patients’ immune responses to cancer. Other novel technologies for cancer are also under development or have recently been approved, such as the Optune electro-therapy device developed by NovoCure, various biologics that Medicenna is developing, and various oncolytic virus therapies and gene therapies. Additionally, many companies are actively involved in the research and development of monoclonal antibody-based and bi-specific or tri-specific antibody-based cancer therapies. Currently, a substantial number of antibody-based drugs are approved for commercial sale for cancer therapy, and a large number of additional ones are under development. Many other third parties compete with us in developing alternative therapies to treat cancer, including: biopharmaceutical companies; biotechnology companies; pharmaceutical companies; academic institutions; and other research organizations, as well as some medical device companies.

We face extensive competition from companies developing new treatments for brain cancer. These include a variety of immune therapies, as mentioned above, as well as a variety of small molecule drugs and biologics. There are also a number of existing drugs used for the treatment of brain cancer that may compete with our product, including, Avastin® (Roche Holding AG), Gliadel® (Eisai Co. Ltd.), and Temodar® (Merck & Co., Inc.), as well as the Optune electro-therapy device (Novocure) and oncolytic viruses. Both checkpoint inhibitor drugs and T cell-based therapies are pursuing clinical trials for solid tumors, including brain cancer, as well.

Most of our competitors have significantly greater financial resources and expertise in research and development, manufacturing, pre-clinical testing, conducting clinical trials, obtaining regulatory approvals and marketing and sales than we do. Smaller or early-stage companies may also prove to be significant competitors, particularly if they enter into collaborative arrangements with large and established companies. These third parties compete with us in recruiting and retaining qualified scientific and management personnel and collaborators, as well as in acquiring technologies complementary to our programs, and in obtaining sites for our clinical trials and enrolling patients.

Corporate Information

We were formed in 1996 and incorporated in Delaware in July 1998. Our principal executive offices are located in Bethesda, Maryland, and our telephone number is (240) 497-9024. Our website address is www.nwbio.com. The information on our website is not part of this report. We have included our website address as a factual reference and do not intend it to be an active link to our website.

Available Information

Our website address is www.nwbio.com. We make available, free of charge through our website, our annual report on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K and all amendments to those reports as soon as is reasonably practicable after such material is electronically filed with or furnished to the Securities and Exchange Commission (the “SEC”), but other information on our website is not incorporated into this report. The SEC maintains an Internet site that contains these reports at www.sec.gov.

Human Capital

The Company continues to operate with a lean staff, supplementing its full time employees with consultants with various expertise. The Company began the year with 19 full-time employees (FTEs) and ended the year on December 31, 2021 with 20 FTEs. With the acquisition of Flaskworks during FY2020, the Company gained additional experienced technical scientific management (1) and scientists (2). The Company's internal workforce is approximately gender equal. As in the past, the Company relied upon specialists in the areas of manufacturing, construction and construction management, clinical trial management, data validation and analysis, scientific advisory, regulatory advisory, legal, financial accounting and tax, and Information Technology. At the Company's international operations in the UK, the Company relies on a contracted workforce. To attract and retain talent, the Company offers a competitive pay and benefits package.

​

6

Table of Contents

Table of Contents

As a company with a novel technology and unproven business strategy, an evaluation of our business and prospects is difficult.

We are still in the process of developing our product candidates through clinical trials. Our technology is novel and involves mobilizing the immune system to fight a patient’s cancer. Immune therapies have been pursued by many parties for decades, and have experienced many failures. In addition, our technology involves personalized treatment products, a new approach to medical products that involves new product economics and business strategies, which have not yet been shown to be commercially feasible or successful. We have not yet gone through scale-up of our operations to commercial scale. The novelty of our technology, product economics, and business strategy, and the limited scale of our operations to date, makes it difficult to assess our prospects for generating revenues commercially in the future.

We will need to expand our management and technical personnel as our operations progress, and we may not be able to recruit such additional personnel and/or retain existing personnel.

As of December 31, 2021, we had a total of 20 full time employees: 18 full-time employees in the US, and one full-time employee in Europe, and one full-time employee in Canada. Of this group, only four employees are considered Management. Additional personnel are retained on a consulting or contractor basis. Many biotech companies would typically have a larger number of employees by the time they reach late stage clinical trials. Such trials and other programs require extensive management capabilities, activities and skill sets, including scientific, medical, regulatory (for FDA and foreign regulatory counterparts), manufacturing, distribution and logistics, site management, reimbursement, business, financial, legal, public relations outreach to both the patient community and physician community, intellectual property, administrative, regulatory (SEC), investor relations and other.

In order to fully perform all these diverse functions, at many sites across the U.S. and in Europe, we may need to expand our management, technical and other personnel. However, with respect to management and technical personal, the pool of such personnel with expertise and experience with living cell products, such as our DCVax immune cell product, is very limited. In addition, we are a small company with limited resources, our business prospects are uncertain and our stock price is volatile. For some or all of such reasons, we may not be able to recruit all the management, technical and other personnel we need, and/or we may not be able to retain all of our existing personnel. In such event, we may have to continue our operations with a small team of personnel, and our business and financial results may suffer.

We rely at present on third-party contract manufacturers. As a result, we may be at risk for issues with manufacturing agreements, capacity limitations and/or supply disruptions, and/or issues with product equivalency.

We rely upon specialized contract manufacturers, operating in specialized GMP (clean room) manufacturing facilities, to produce all of our DCVax products. We have worked with several such manufacturers, in several different locations, during various periods of our clinical trials and our compassionate treatment programs, including Advent BioServices, Cognate BioServices and the Fraunhofer Institute.

We will need to enter into new contractual agreements for manufacturing at our Sawston, U.K. facility and new agreements for commercial production in any locations. We may encounter difficulties reaching such agreements, or the terms of such agreements may not be favorable. Following negotiations, if it is necessary or desirable to change our facility design and development arrangements or our manufacturing arrangements, that could involve increased facility costs and/or increased costs related to manufacturing of our products, and could result in delays in our programs or applications for various regulatory approvals. In addition, after such contracts are in place, the third party contractors may have capacity limitations and/or supply disruptions, and as a client we may not be able to prevent such limitations or disruptions, and not be able to control or mitigate the impact on our programs.

We have been in breach of the services agreements with our contract manufacturers on numerous occasions, primarily for untimely payment or non-payment. Our breaches of the services agreements may not be tolerated in the future as they have been in the past, and if we continue to breach the services agreements, for non-payment or otherwise, the contract manufacturers could cease providing services and/or terminate these agreements.

Our intention is for the Sawston, U.K. facility to manufacture DCVax products for both the UK and other regions. However, this may not turn out to be feasible, for regulatory, operational and/or logistical reasons. It is also unclear whether or how Brexit will affect or interfere with these plans in regard to Europe.

8

Table of Contents

Problems with the manufacturing facilities, processes or operations of our contract manufacturer(s) could result in a failure to produce, or a delay in producing adequate supplies of our DCVax product candidates. A number of factors could cause interruptions or delays, including the inability of a supplier to provide raw materials, equipment malfunctions or failures, damage to a facility due to natural disasters or otherwise, changes in FDA, U.K. or European regulatory requirements or standards that require modifications to our manufacturing processes, action by the FDA, U.K. or European regulators, or by us that results in the halting or slowdown of production of components or finished products due to regulatory issues, our manufacturers going out of business or failing to produce product as contractually required, insufficient technical personnel and/or specialized facilities to produce sufficient products, and/or other factors. A number of factors could also cause possible issues about the equivalency of DCVax product produced in different facilities or locations, which could make it necessary for us to perform additional studies and incur additional costs and delays. Because manufacturing processes for our DCVax product candidates are highly complex, require specialized facilities (dedicated exclusively to DCVax production) and personnel that are not widely available in the industry, involve equipment and training with long lead times, and are subject to lengthy regulatory approval processes, alternative qualified production capacity may not be available on a timely basis or at all. Also, as noted above, our contract manufacturer(s) could choose to terminate their agreements with us if we are in breach, or if we undergo a change of control. Difficulties, delays or interruptions in the manufacturing and supply and delivery of our DCVax product candidates could require us to stop enrolling new patients into clinical trials, and/or require us to stop the trials or other programs, stop the treatment of patients in the trials or other programs, increase our costs, damage our reputation and, if our product candidates are approved for sale, cause us to lose revenue or market share if our manufacturers are unable to timely meet market demands.

The manufacturing of our product candidates will have to be greatly scaled up for commercialization, and neither we nor our contract manufacturers have experience with such scale-up.

As is the case with any clinical trial, our Phase III clinical trial of DCVax-L for GBM involves a number of patients that is a small fraction of the number of potential patients for whom DCVax-L may be applicable in the commercial market. The same will be true of our other clinical programs with DCVax-L or other DCVax product candidates. If our DCVax-L and/or other DCVax product candidates are approved for commercial sale, it will be necessary to greatly scale up the volume of manufacturing, far above the level needed for clinical trials. Neither we nor our contract manufacturers have experience with such scale-up. In addition, there are likely only a few consultants or advisors in the industry who have such experience and can provide guidance or assistance, because active immune therapies such as DCVax are a fundamentally new category of product in two major ways: these active immune therapy products consist of living cells, not chemical or biologic compounds, and the products are personalized. To our knowledge, very few such products have successfully completed the necessary scale-up for commercialization. For example, Dendreon Corporation encountered substantial difficulties trying to scale up the manufacturing of its Provenge® product for commercialization. To our knowledge, even the CAR-T products which are being commercialized have so far only scaled up to moderate product volumes.

The necessary specialized facilities, equipment and personnel may not be available or obtainable for the scale-up of manufacturing of our product candidates.

The manufacture of living cells requires specialized facilities, equipment and personnel which are entirely different than what is required for the manufacturing of chemical or biologic compounds. Scaling up the manufacturing of living cell products to volume levels required for commercialization will require enormous amounts of these specialized facilities, equipment and personnel - especially where, as in the case of our DCVax product candidates, the product is personalized and must be made for each patient individually. Since living cell products are so new, and have barely begun to reach commercialization, the supply of the specialized facilities and personnel needed for them is not widely available and therefore is in the process of being developed. However, there has been a sharp increase in the demand for these specialized facilities and personnel, as large numbers of companies seek to develop T cell and other immune cell products. It may not be possible for us or our manufacturers to obtain all of the specialized facilities and personnel needed for commercialization of our DCVax product candidates, or even for further sizeable trials. This could delay or halt our commercialization and/or further substantial trials.

We are anticipating that the production systems developed by Flaskworks may play an important role in enabling scale-up of production and reducing the number of GMP (clean room) suites and personnel needed for scale-up.  However, the Flaskworks systems are still undergoing development and optimization, and have not been operated at commercial scale to date.  It could turn out that the Flaskworks systems are not capable of or suitable for substantial scale-up, or not acceptable to regulatory authorities for such scale-up.  It could also turn out that deployment the Flaskworks system does not reduce the number of GMP suites and personnel needed for DCVax production as anticipated.

9

Table of Contents

Our technology is novel, involves complex immune system elements, and may not prove to be effective.

Data already obtained, or in the future obtained, from pre-clinical studies and clinical trials do not necessarily predict the results that will be obtained from later pre-clinical studies and clinical trials. Over the course of several decades, there have been many different immune therapy product designs - and many product failures and company failures. To our knowledge, to date, only a couple of active immune therapies have been approved by the FDA, including one dendritic cell therapy and a couple of CAR-T cell therapies. The human immune system is complex, with many diverse elements, and the state of scientific understanding of the immune system is still limited. Some immune therapies previously developed by other parties showed surprising and unexpected toxicity in clinical trials. Other immune therapies developed by other parties delivered promising results in early clinical trials, but failed in later stage clinical trials.

Although we believe the results from the small early stage clinical trials of DCVax-L for newly diagnosed GBM were quite positive, those results may not be achieved in our later stage clinical trials, such as the 331-patient Phase III trial for GBM that is nearing completion, and our product candidates may not ultimately be found to be effective. Similarly, although we believe the interim blinded data from the Phase III trial that we have collected and reported to date are encouraging, the results of this trial when the data are unblinded may not be as encouraging or may not be positive at all. Further, although the safety profile of our DCVax-L product was excellent in the early stage clinical trials, toxicity may be seen as we treat larger numbers of patients in late stage clinical trials. If such toxicity occurs, it could limit, delay or stop further clinical development or commercialization of our DCVax-L product.

We have only conducted the Phase I portion of our first-in-man Phase I/II clinical trial with our DCVax Direct product, after prior early stage trials with DCVax-L and DCVax-Prostate. Although the early results have not indicated any significant toxicity, we do not yet know what efficacy or toxicity DCVax-Direct may show in a larger sample of human patients. This product may not ultimately be found to be effective, and/or it may be found to be toxic, which could limit, delay or stop clinical development or commercialization of DCVax-Direct.

Clinical trials for our product candidates are expensive and time consuming, and their outcome is uncertain.

The process of obtaining and maintaining regulatory approvals for new therapeutic products is expensive, lengthy and uncertain. Costs and timing of clinical trials may vary significantly over the life of a project owing to any or all of the following non-exclusive reasons:

10

Table of Contents

Late stage clinical trials, such as our Phase III clinical trial for GBM patients, are especially expensive, typically requiring tens or hundreds of millions of dollars, and take years to reach their outcomes. Such outcomes often fail to reproduce the results of earlier trials. It is often necessary to conduct multiple late stage trials (including multiple Phase III trials) in order to obtain sufficient results to support product approval, which further increases the expense and time involved. Sometimes trials are further complicated by changes in requirements while the trials are under way (for example, when the standard of care changes for the disease that is being studied in the trial, or when there are changes in the scientific understanding of the disease or the treatment, and/or changes in the competitive landscape.) For example, while the Company’s lead program, the Phase III clinical trial of DCVax-L for brain cancer, has been under way, there has been a very large proliferation of new treatments in various stages of development, as well as some new product approvals, for brain cancer. Any of our current or future product candidates could take a significantly longer time to gain regulatory approval than we expect, or may never gain approval, either of which could delay or stop the commercialization of our DCVax product candidates.

We have limited experience in conducting and managing clinical trials, or collecting, confirming and analyzing trial data, and we rely on third parties to conduct these activities.

We rely on third parties to assist us, on a contract services basis, in managing and monitoring all of our clinical trials as well as the collection, confirmation and analysis of the trial data. We do not have experience conducting late stage clinical trials, or collecting, validating and analyzing trial data by ourselves without third party service firms, nor do we have experience in supervising such third parties in managing late stage, multi-hundred patient clinical trials, and collecting, validating and analyzing the data, other than our current Phase III trial for GBM. Our lack of experience and/or our reliance on these third-party service firms may result in delays or failure to complete these trials and/or the data collection, validation and analyses successfully or on time. If the third parties fail to perform, we may not be able to find sufficient alternative suppliers of those services in a reasonable time period, or on commercially reasonable terms, if at all.

We may fail to comply with regulatory requirements.

Our success will be dependent upon our ability, and our collaborative partners’ abilities, to maintain compliance with regulatory requirements in multiple countries, including current good manufacturing practices, or cGMP, and safety reporting obligations. The failure to comply with applicable regulatory requirements can result in, among other things, fines, injunctions, civil penalties, total or partial suspension of regulatory approvals, refusal to approve pending applications, recalls or seizures of products, operating and production restrictions and criminal prosecutions.

11

Table of Contents

Regulatory approval of our product candidates may be withdrawn at any time.

After any regulatory approval has been obtained for medicinal products (including any early or conditional approval), the product and the manufacturer are subject to continual review, including the review of adverse experiences and clinical results that are reported after our products are made available to patients, and there can be no assurance that such approval will not be withdrawn or restricted. Regulators may also subject approvals to restrictions or conditions, or impose post-approval obligations on the holders of these approvals, and the regulatory status of such products may be jeopardized if such obligations are not fulfilled. If post-approval studies are required, such studies may involve significant time and expense.

The manufacturer and manufacturing facilities we use to make any of our products will also be subject to periodic review and inspection by the FDA, MHRA, EMA or other regulator, as applicable. The discovery of any new or previously unknown problems with the product, manufacturer or facility may result in restrictions on the product or manufacturer or facility, including withdrawal of the product from the market. We will continue to be subject to the FDA, the U.K. Medicines and Healthcare Products Regulatory Agency, or MHRA, the European Medicines Agency, or EMA, and other regulatory requirements, as applicable, governing the labeling, packaging, storage, advertising, promotion, recordkeeping, and submission of safety and other post-market information for all of our product candidates, even those that the FDA, MHRA, EMA, or other regulator, as applicable, had approved. If we fail to comply with applicable continuing regulatory requirements, we may be subject to fines, restriction, suspension or withdrawal of regulatory approval, product recalls and seizures, operating restrictions and other adverse consequences.

Our operations under early access programs may not be successful.

There is not much accumulated or available experience, information or precedents in regard to early access programs, especially for new types of treatments such as immune therapies. Establishing operations under an early access program will require us to establish and implement new operational, contractual, financial and other arrangements with physicians, hospitals, patients and others. We may not be successful in establishing and implementing such arrangements, and/or such arrangements may not be financially satisfactory or viable.

We may not be successful in negotiating reimbursement.

If our DCVax-L product obtains regulatory approval for commercialization, such commercialization will be difficult and may not be feasible unless we obtain coverage by health insurance and/or national health systems for reimbursement of our product price. Obtaining such coverage by health insurance and/or national health systems will be difficult and we do not have experience with such processes. Our DCVax-L product is a fully personalized, individual product and, as such, is expected to be expensive. In addition, our DCVax-L product involves a cost structure (with much of the costs upfront, in connection with the manufacturing of the personalized DCVax-L product for a patient) that is different than traditional drugs and may require different reimbursement arrangements. These factors may make our negotiations for reimbursement more difficult. We may not be successful in negotiating or obtaining reimbursement, or obtaining it on acceptable or viable terms.

Our product candidates will require a different distribution model than conventional therapeutic products, and this may impede commercialization of our product candidates.

Our DCVax product candidates consist of living human immune cells. Such products are entirely different from chemical or biologic drugs, and require different handling, distribution and delivery than chemical or biologic drugs. One crucial difference is that the biomaterial ingredients (immune cells and tumor tissue) from which we make DCVax products and the finished DCVax products themselves are subject to time constraints in the shipping and handling. The biomaterial ingredients come from the medical centers to the manufacturing facility fresh and not frozen, and must arrive within a certain window of time and in usable condition. Performance failures by the medical center or the courier company can result in biomaterials that are not usable, in which case it may not be possible to make DCVax product for the patient involved. The finished DCVax products are frozen, and must remain frozen throughout the process of distribution and delivery to the medical center or physician’s office, until the time of administration to the patient, and cannot be handled at room temperature until then or their viability will be lost. In addition, our DCVax product candidates are personalized and they involve ongoing treatment cycles over several years for each patient. Each product shipment for each patient must be tracked and managed individually. For all of these reasons, among others, we will not be able to simply use the distribution networks and processes that already exist for conventional drugs. It may take time for shipping companies, hospitals, pharmacies and physicians to adapt to the requirements for handling, distribution and delivery of these products, which may adversely affect our commercialization.

12

Table of Contents

Our product candidates will require different marketing and sales methods and personnel than conventional therapeutic products. Also, we lack sales and marketing experience. These factors may result in significant difficulties in commercializing our product candidates.

The commercial success of any of our product candidates will depend upon the strength of our sales and marketing efforts. We do not have a marketing or sales force and have no experience in marketing or sales of products like our lead product, DCVax-L for GBM, or our additional product, DCVax-Direct. To fully commercialize our product candidates, we will need to recruit and train marketing staff and a sales force with technical expertise and ability to manage the distribution of our DCVax-L for GBM. As an alternative, we could seek assistance from a corporate partner or a third-party services firm with a large distribution system and a large direct sales force. However, since our DCVax products are living cell, immune therapy products, and these are a fundamentally new and different type of product than are on the market today, we would still have to train such partner’s or such services firm’s personnel about our products, and would have to make changes in their distribution processes and systems to handle our products. We may be unable to recruit and train effective sales and marketing forces or our own, or of a partner or a services firm, and/or doing so may be more costly and difficult than anticipated. Such factors may result in significant difficulties in commercializing our product candidates, and we may be unable to generate significant revenues.

The availability and amount of potential reimbursement for our product candidates by government and private payers is uncertain and may be delayed and/or inadequate.

The availability and extent of reimbursement by governmental and/or private payers is essential for most patients to be able to afford expensive treatments, such as cancer treatments. In the United States, the principal decisions about reimbursement for new medicines are typically made by the Centers for Medicare & Medicaid Services, or CMS, an agency within the U.S. Department of Health and Human Services, as CMS decides whether and to what extent a new medicine will be covered and reimbursed under Medicare. Private payers tend to follow CMS to a substantial degree. It is difficult to predict what CMS will decide with respect to reimbursement for fundamentally novel products such as ours, as there have been very few products similar to ours to date., We are aware of only a couple of active immune therapies that have reached the stage of reimbursement decision making processes, including one dendritic cell therapy and a couple of CAR-T cell therapies. Although CMS has approved coverage and reimbursement for a couple of these products, and private payers seem to be following suit in the US, there remain substantial questions and concerns about reimbursement for these products, especially outside the US.

Reimbursement agencies in Europe can be even more conservative than CMS in the U.S. A number of cancer drugs which have been approved for reimbursement in the U.S. have not been approved for reimbursement in certain European countries, and/or the level of reimbursement approved in Europe is lower than in the U.S. Reportedly, in Europe reimbursement for certain immune therapies was initially declined, and reportedly involved difficult negotiations. The same could happen with respect to our DCVax products.

Various factors could increase the difficulties for our DCVax products to obtain reimbursement. Costs and/or difficulties associated with the reimbursement of Provenge and/or T cell therapies could create an adverse environment for reimbursement of other immune therapies, such as our DCVax products. Approval of other competing products (drugs and/or devices) for the same disease indications could make the need for our products and the cost-benefit balance seem less compelling. The cost structure of our product is not a typical cost structure for medical products, as the majority of our costs are incurred up front, when the manufacturing of the personalized product is done. Our atypical cost structure may not be accommodated in any reimbursement for our products. If we are unable to obtain adequate levels of reimbursement, our ability to successfully market and sell our product candidates will be adversely affected.

The manner and level at which reimbursement is provided for services related to our product candidates (e.g., for administration of our product to patients) are also important. If the reimbursement for such services is inadequate, that may lead to physician resistance and adversely affect our ability to market or sell our products.

The methodology under which CMS makes coverage and reimbursement determinations is subject to change, particularly because of budgetary pressures facing the Medicare program. For example, the Medicare Prescription Drug, Improvement, and Modernization Act, or Medicare Modernization Act, enacted in 2003, provided for a change in reimbursement methodology that has reduced the Medicare reimbursement rates for many drugs, including oncology therapeutics. The Affordable Care Act may also result in changes in reimbursement arrangements that adversely affect the prospects for reimbursement of our products.

13

Table of Contents

In markets outside the U.S., the prices of medical products are subject to direct price controls and/or to reimbursement with varying price control mechanisms, as part of national health systems. In general, the prices of medicines under such systems are substantially lower than in the U.S. Some jurisdictions operate positive and/or negative list systems under which products may only be marketed once a reimbursement price has been agreed. Other countries allow companies to fix their own prices for medicines, but monitor and control company profits. The downward pressure on health care costs in general, particularly prescription drugs, has become very intense. As a result, increasingly high barriers are being erected to the entry of new products. Accordingly, in markets outside the U.S., the reimbursement for our products may be reduced compared with the U.S. and may be insufficient to generate commercially reasonable revenues and profits.

Competition in the biotechnology and biopharmaceutical industry is intense, rapidly expanding and most of our competitors have substantially greater resources than we do.

The biotechnology and biopharmaceutical industries are characterized by rapidly advancing technologies, intense competition and a strong emphasis on proprietary products. A growing number of other companies, such as Juno, Kite Bellicum, Agenus, Asterias, Dandrit, Immunicum, Sotio, AiVita and many others, are actively involved in the research and development of immune therapies or cell-based therapies for cancer. In addition, other novel technologies for cancer are under development or commercialization, such as checkpoint inhibitor drugs (which are being rapidly developed by numerous big pharma companies including BMS, Merck, Pfizer, Astra Zeneca, Roche and others) and various T cell-based therapies (which are also being rapidly developed by numerous companies with extraordinary resource backing), as well as the electro-therapy device of NovoCure. Additionally, many companies are actively involved in the research and development of monoclonal antibody-based cancer therapies. Currently, a substantial number of antibody-based products are approved for commercial sale for cancer therapy, and a large number of additional ones are under development, including late stage trials. Many other third parties compete with us in developing alternative therapies to treat cancer, including: biopharmaceutical companies; biotechnology companies; pharmaceutical companies; academic institutions; and other research organizations, as well as some medical device companies (e.g., NovoCure and MagForce Nano Technologies AG).

We face extensive competition from companies developing new treatments for brain cancer. These include a variety of immune therapies, as mentioned above (including T cell-based therapies and checkpoint inhibitor drugs), as well as a variety of small molecule drugs and biologics drugs. There are also a number of existing drugs used for the treatment of brain cancer that may compete with our product, including, Avastin® (Roche Holding AG), Gliadel® (Eisai Co. Ltd.), and Temodar® (Merck& Co., Inc.), as well as NovoCure’s electrotherapy device.

Most of our competitors have significantly greater financial resources and expertise in research and development, manufacturing, pre-clinical testing, conducting clinical trials, obtaining regulatory approvals and marketing and sales than we do. Smaller or early-stage companies may also prove to be significant competitors, particularly if they enter into collaborative arrangements with large and established companies.

These third parties compete with us in recruiting and retaining qualified scientific and management personnel and collaborators, as well as in acquiring technologies complementary to our programs, and in obtaining sites for our clinical trials and enrolling patients.

Our competitors may complete their clinical development more rapidly than we and our products do, may develop more effective or affordable products, or may achieve earlier or longer patent protection or earlier product marketing and sales. Any products developed by us may be rendered obsolete and non-competitive.

Competing generic medicinal products may be approved.

In the E.U., there exists a process for approval of generic biological medicinal products once patent protection and other forms of data and market exclusivity have expired. Arrangements for approval of generic biologics products exist in the U.S. as well, and the FDA has begun approving bio-similar products. Other jurisdictions may approve generic biologic medicinal products as well. If generic biologic medicinal products are approved, competition from such products may substantially reduce sales of our products.

14

Table of Contents

We may be exposed to potential product liability claims, and our existing insurance may not cover these claims, in whole or in part. In addition, insurance against such claims may not be available to us on reasonable terms in the future, if at all.

Our business exposes us to potential product liability risks that are inherent in the testing, manufacturing, marketing, sale and use of therapeutic products. We have insurance coverage but this insurance may not cover any claims made. In the future, insurance coverage may not be available to us on commercially reasonable terms (including acceptable cost), if at all. Insurance that we obtain may not be adequate to cover claims against us. Regardless of whether they have any merit or not, and regardless of their eventual outcome, product liability claims may result in substantially decreased demand for our product candidates, injury to our reputation, withdrawal of clinical trial participants or physicians, and/or loss of revenues. Thus, whether or not we are insured, a product liability claim or product recall may result in losses that could be material.

We may be subject to environmental regulatory requirements, and could fail to meet such requirements, and we do not carry insurance against environmental damage or injury claims.

We may need to store, handle, use and dispose of controlled hazardous, radioactive and biological materials in our business. Our development activities may result in our becoming subject to regulatory requirements, and if we fail to comply with applicable requirements, we could be subject to substantial fines and other sanctions, delays in research and production, and increased operating costs. In addition, if regulated materials were improperly released at our current or former facilities or at locations to which we send materials for disposal, we could be liable for substantial damages and costs, including cleanup costs and personal injury or property damages, and we could incur delays in research and production and increased operating costs.

Insurance covering certain types of claims of environmental damage or injury resulting from the use of these materials is available but can be expensive and is limited in its coverage. We have no insurance specifically covering environmental risks or personal injury from the use of these materials and if such use results in liability, our business may be seriously harmed.

Collaborations play an important role in our business, and could be vulnerable to competition or termination.

We work with scientists and medical professionals at a variety of academic and other institutions, some of whom have conducted research for us or have assisted in developing our research and development strategy. These scientists and medical professionals are collaborators, not our employees. They may have commitments to, or contracts with, other institutions or businesses (including competitors) that limit the amount of time they have available to work with us. We have little control over these individuals. We can only expect that they devote time to us and our programs as required by any license, consulting or sponsored research agreements we may have with them. In addition, these individuals may have arrangements with other companies to assist in developing technologies that may compete with our products. If these individuals do not devote sufficient time and resources to our programs, or if they provide substantial assistance to our competitors, our business could be seriously harmed.

The success of our business strategy may partially depend upon our ability to develop and maintain our collaborations and to manage them effectively. Due to concerns regarding our ability to continue our operations or the commercial feasibility of our personalized DCVax product candidates, these third parties may decide not to conduct business with us or may conduct business with us on terms that are less favorable than those customarily extended by them. If either of these events occurs, our business could suffer significantly.

We may have disputes with our collaborators, which could be costly and time consuming. Failure to successfully defend our rights could seriously harm our business, financial condition and operating results. We intend to continue to enter into collaborations in the future. However, we may be unable to successfully negotiate any additional collaboration and any of these relationships, if established, may not be scientifically or commercially successful.

Our business could be adversely affected by new legislation and/or product related issues.

Changes in applicable legislation and/or regulatory policies or discovery of problems with the product, production process, site or manufacturer may result in delays in bringing products to market, the imposition of restrictions on the product’s sale or manufacture, including the possible withdrawal of the product from the market, or may otherwise have an adverse effect on our business.

15

Table of Contents

Our business could be adversely affected by animal rights activists.

Our business activities have involved animal testing and could involve further such testing, as such testing is required before new medical products can be tested in clinical trials in human patients. Animal testing has been the subject of controversy and adverse publicity. Some organizations and individuals have attempted to stop animal testing by pressing for legislation and regulation in these areas. To the extent that the activities of such groups are successful, our business could be adversely affected. Negative publicity about us, our pre-clinical trials and our product candidates could also adversely affect our business.

Multiple late stage clinical trials of DCVax-L for GBM, our lead product, may be required before we can obtain regulatory approval.

Typically, companies conduct multiple late stage clinical trials of their product candidates before seeking product approval. Our current Phase III 331-patient clinical trial of DCVax-L for GBM is our first late stage trial. We may be required to conduct additional late stage trials with DCVax-L for GBM before we can obtain product approval. This would substantially delay our commercialization, and might not be possible to carry out, due to development and/or approval of competing products, lack of funding, and/or other factors. In addition, our Phase III trial of DCVax-L was placed on a partial clinical hold for new screening for enrollment in 2015. Although the FDA lifted its hold in February 2017 as previously reported by the Company, the Company had already closed enrollment with 331 of the planned 348 patients. Since we did not enroll the last 17 of the planned 348 patients, this could adversely affect the statistical and other analyses of our Phase III trial results, and could make it more difficult to seek product approval or more likely that further trials could be required. In addition, a rapidly growing number of products are under development for brain cancer, including immunotherapies such as checkpoint inhibitor drugs and T cell-based therapies, and some (e.g., NovoCure’s device) have been approved in the U.S. It is possible that the standard of care for brain cancer could change before we complete our Phase III trial and analysis of its results, or before we are able to seek approval for commercialization. This could necessitate further clinical trials with our DCVax-L product candidate for brain cancer, which may not be feasible.

Changes in manufacturing methods for DCVax-L could require us to conduct equivalency studies and/or additional clinical trials.

With biologics products, in some cases “the process is the product”: i.e., the manufacturing process is considered to be as integral to the product as is the composition of the product itself. If any changes are made in the manufacturing process, and such changes are considered material by the regulatory authorities, the company sponsor may be required to conduct equivalency studies to show that the product is equivalent under the changed manufacturing processes as under the original manufacturing processes, and/or the company sponsor may be required to conduct additional clinical trials. In addition, if there are multiple manufacturing locations, equivalency studies may be required to show that the products produced in the respective facilities are substantially the same. Our manufacturing processes have undergone some changes during or since the early clinical trials, and we have multiple manufacturing locations. Accordingly, we may be required to conduct equivalency studies, and/or additional clinical trials, before we can obtain product approval, unless the regulatory authorities are satisfied that the changes in processes do not affect the quality, efficacy or safety of the product, and satisfied that the products made in each manufacturing location are substantially the same.

We may not receive regulatory approvals for our product candidates or there may be a delay in obtaining such approvals.

Our products and our ongoing development activities are subject to regulation by regulatory authorities in the countries in which we and our collaborators and distributors wish to test, manufacture or market our products. For instance, the FDA will regulate our product in the U.S. and equivalent authorities, such as the MHRA and EMA will regulate in Europe and other jurisdictions. Regulatory approval by these authorities will be subject to the evaluation of data relating to the quality, efficacy and safety of the product for its proposed use, and there can be no assurance that the regulatory authorities will find our data sufficient to support product approval of DCVax-L or DCVax-Direct. In addition, the endpoint against which the data is measured must be acceptable to the regulatory authorities, and the statistical analysis plan for how the data will be evaluated must also be acceptable to the regulatory authorities. The statistical analysis plan that we submitted to regulators for the Phase III trial embodies a different primary endpoint and secondary endpoint than did the original Protocol for the trial. Under the Protocol the primary endpoint was progression free survival, or PFS, and the secondary endpoint was overall survival, or OS. Both of these endpoints were confounded: the PFS endpoint by pseudo-progression, and the OS endpoint by the “crossover” provision in the trial design, which allowed all of the patients in the trial to cross over to DCVax-L treatment after tumor recurrence (while remaining blinded as to which treatment they received before tumor recurrence).  The statistical analysis plan uses external control patients rather than within-study controls. There can be no assurance that regulatory authorities will allow a product approval to be based upon this approach.

16

Table of Contents

The time period required to obtain regulatory approval varies between countries. In the U.S., for products without “Fast Track” status, it can take up to 18 months after submission of an application for product approval to receive the FDA’s decision. Even with Fast Track status, FDA review and decision can take up to 12 months. At present, we do not have Fast Track status for our lead product, DCVax-L for GBM. We plan to apply for Fast Track status, but there can be no assurance that FDA will grant us such status for DCVax-L.

Different regulators may impose their own requirements and may refuse to grant, or may require additional data before granting, an approval, notwithstanding that regulatory approval may have been granted by other regulators. Regulatory approval may be delayed, limited or denied for a number of reasons, including clinical data, the product not meeting safety or efficacy requirements or any relevant manufacturing processes or facilities not meeting applicable requirements as well as case load at the regulatory agency at the time.

We may not obtain or maintain the benefits associated with orphan drug status, including market exclusivity.

Although our lead product, DCVax-L for GBM, has been granted orphan drug status in both the U.S. and the E.U., we may not receive the benefits associated with orphan drug designation (including the benefit providing for market exclusivity for a number of years). This may result from a failure to maintain orphan drug status, or result from a competing product reaching the market that has an orphan designation for the same disease indication. Under U.S. and E.U. rules for orphan drugs, if such a competing product reaches the market before ours does, the competing product could potentially obtain a scope of market exclusivity that limits or precludes our product from being sold in the U.S. for seven years or from being sold in the E.U. for ten years. Also, in the E.U., even after orphan status has been granted, that status is re-examined shortly prior to the product receiving any regulatory approval. The EMA must be satisfied that there is evidence that the product offers a significant benefit relative to existing therapies, in order for the therapeutic product to maintain its orphan drug status. Accordingly, our product candidates will have to re-qualify for orphan drug status prior to any potential product approval in the E.U., and may have to do so elsewhere as well.

Our intellectual property rights may be overturned, narrowed or blocked, and may not provide sufficient commercial protection for our product candidates, or third parties may infringe upon our intellectual property.

The patent position of biotechnology and pharmaceutical companies generally is highly uncertain, involves complex legal and factual questions and has in recent years been the subject of much litigation. As a result, the issuance, scope, validity, enforceability and commercial value of our patent rights are highly uncertain. Patent laws afford only limited protection and may not protect our rights to the extent necessary to sustain any competitive advantage we may have. In addition, the laws of some foreign countries do not protect proprietary rights to the same extent as the laws of the United States, and we may encounter significant problems in protecting our proprietary rights in those countries. Moreover, patents and patent applications relating to living cell products are relatively new, involve complex factual and legal issues, and are largely untested in litigation - and as a result, are uncertain. Our pending and future patent applications may not result in patents being issued which adequately protect our technology or products or which effectively prevent others from commercializing the same or competitive technologies and products. As a result, we may not be able to obtain meaningful patent protection for our commercial products, and our business may suffer as a result. Third parties may challenge our existing patents, and such challenges could result in overturning or narrowing some of our patents. Even if our patents are not challenged, third parties could assert that their patents block our use of technology covered by some or all of our patents.

As of December 31, 2021, we had 200 issued patents and 47 pending patent applications worldwide relating to our product candidates and related matters such as manufacturing processes. The issued patents expire at various dates from 2022 to 2036. Our issued patents may be challenged, and such challenges may result in reductions in scope, cancellations or invalidations. Our pending patent applications may not result in issued patents. Moreover, our patents and patent applications may not be sufficiently broad to prevent others from using substantially similar technologies or from developing competing products. We also face the risk that others may independently develop similar or alternative technologies, or design around our patented technologies. As a result, no assurance can be given that any of our pending or future patent applications will be granted, that the scope of any patent protection currently granted or that may be granted in the future will exclude competitors or provide us with competitive advantages, that any of the patents that have been or may be issued to us will be held valid if subsequently challenged, or that other parties will not claim rights to or ownership of our patents or other proprietary rights that we hold.

We have taken security measures (including execution of confidentiality agreements) to protect our proprietary information, especially proprietary information that is not covered by patents or patent applications. These measures, however, may not provide adequate protection for our trade secrets or other proprietary information. In addition, others may independently develop substantially equivalent proprietary information or techniques or otherwise gain access to our trade secrets.

17

Table of Contents

We may be exposed to claims or lawsuits that our products infringe patents or other proprietary rights of other parties.

Our commercial success depends upon our ability and the ability of our collaborators to develop, manufacture, market, sell our product candidates, and use our proprietary technologies without infringing the proprietary rights of third parties. We have not conducted a comprehensive freedom-to-operate review to determine whether our proposed business activities or use of certain of the technology covered by patent rights owned by us would infringe patents issued to third parties.

There is a substantial amount of litigation involving patent and other intellectual property rights in the biotechnology and biopharmaceutical industries generally. The patent landscape is especially uncertain in regard to cell therapy products, as it involves complex legal and factual questions for which important legal principles remain unresolved. We may become party to, or be threatened with, future adversarial proceedings or litigation regarding intellectual property rights with respect to our products and technology, including interference proceedings, Inter Partes Reexamination, or Post Grant Review before the U.S. Patent and Trademark Office. Third parties may assert infringement claims against us based on existing patents or patents that may be granted in the future. If we are found to infringe a third party’s intellectual property rights, we could be required to obtain a license from such third party to continue developing and marketing our products and technology. However, we may not be able to obtain any required license on commercially reasonable terms or at all. Even if we were able to obtain a license, it could be non-exclusive, thereby giving our competitors access to the same technologies licensed to us. We could be forced, including by court order, to cease commercializing the infringing technology or product. In addition, we could be found liable for monetary damages. If the infringement is found to be willful, we could be liable for treble damages. A finding of infringement could prevent us from commercializing our product candidates or force us to cease some of our business operations, which could materially harm our business. Claims that we have misappropriated the confidential information or trade secrets of third parties could have a similar negative impact on our business.

We have already been exposed to one patent lawsuit by a large company, which we vigorously defended. Our defense resulted in the plaintiff withdrawing nearly all of the claims it filed, and in settlement of the last claims without our paying the plaintiff anything. However, the litigation was expensive and time consuming. In the past, we have also been exposed to claims (without a lawsuit) by a competitor asserting or implying (and commentaries by third parties based on the claims by our competitor) that a patent issued to our competitor covers our products. We obtained and publicly reported legal advice that those claims were without merit. However, in the future, we could again be exposed to claims by third parties - with or without merit - that our products infringe their intellectual property rights.

Even if resolved in our favor, litigation or other legal proceedings relating to intellectual property claims may cause us to incur significant expenses, and could distract our technical and management personnel from their normal responsibilities. In addition, there could be public announcements of the results of hearings, motions or other interim proceedings or developments and if securities analysts or investors perceive these results to be negative, it could have a substantial adverse effect on the price of our common stock. Such litigation or proceedings could substantially increase our operating losses and reduce the resources available for development activities or any future sales, marketing or distribution activities. We may not have sufficient financial or other resources to adequately conduct such litigation or proceedings. Some of our competitors may be able to sustain the costs of such litigation or proceedings more effectively than we can because of their greater financial resources. Uncertainties resulting from the initiation and continuation of patent litigation or other proceedings could have a material adverse effect on our ability to compete in the marketplace.

DCVax is our only technology in clinical development.

Unlike many pharmaceutical companies that have a number of products in development and which utilize many different technologies, we are dependent on the success of our DCVax platform technology. While the DCVax technology has a wide scope of potential use, and is embodied in several different product lines for different clinical situationsif the core DCVax technology is not effective or is toxic or is not commercially viable, our business could fail. We do not currently have other technologies that could provide alternative support for us.

18

Table of Contents

Risks Related to our Common Stock

The market price of our common stock is volatile and can be adversely affected by several factors.

The share prices of publicly traded biotechnology and emerging pharmaceutical companies, particularly companies without consistent product revenues and earnings, can be highly volatile and are likely to remain highly volatile in the future. The price which investors may realize in sales of their shares of our common stock may be materially different than the price at which our common stock is quoted, and will be influenced by a large number of factors, some specific to us and our operations, and some unrelated to our operations. Such factors may cause the price of our stock to fluctuate frequently and substantially. Such factors may include large purchases or sales of our common stock, shorting of our stock, positive or negative events, commentaries or publicity relating to our company, management or products, or other companies, management or products, including other immune therapies for cancer or immune therapies or cancer therapies generally, positive or negative events relating to healthcare and the overall pharmaceutical and biotech sector, the publication of research by securities analysts and changes in recommendations of securities analysts, legislative or regulatory changes, and/or general economic conditions. In the past, shareholder litigation, including class action litigation, has been brought against other companies that experienced volatility in the market price of their shares and/or unexpected or adverse developments in their business. Whether or not meritorious, litigation brought against a company following such developments can result in substantial costs, divert management’s attention and resources, and harm the company’s financial condition and results of operations.

Our Common Stock is considered a “penny stock” and may be difficult to sell.

The Commission has adopted regulations which generally define “penny stock” to be an equity security that has a market price of less than $5.00 per share or an exercise price of less than $5.00 per share, subject to specific exemptions. Historically, the price of our Common Stock has fluctuated greatly. As of the date of this filing, the market price of our common stock is less than $5.00 per share, and therefore is a “penny stock” according to Commission rules. The “penny stock” rules impose additional sales practice requirements on broker-dealers who sell securities to persons other than established customers and accredited investors (generally those with assets in excess of $1,000,000 or annual income exceeding $200,000 or $300,000 together with their spouse). For transactions covered by these rules, the broker-dealer must make a special suitability determination for the purchase of securities and have received the purchaser’s written consent to the transaction before the purchase. Additionally, for any transaction involving a penny stock, unless exempt, the broker-dealer must deliver, before the transaction, a disclosure schedule prescribed by the Commission relating to the penny stock market. The broker-dealer also must disclose the commissions payable to both the broker-dealer and the registered representative and current quotations for the securities. Finally, monthly statements must be sent disclosing recent price information on the limited market in penny stocks. These additional burdens imposed on broker-dealers may restrict the ability or decrease the willingness of broker-dealers to sell our common stock, and may result in decreased liquidity for our common stock and increased transaction costs for sales and purchases of our common stock as compared to other securities.

The requirements of the Sarbanes-Oxley Act of 2002 and other U.S. securities laws impose substantial costs, and may drain our resources and distract our management.

We are subject to certain of the requirements of the Sarbanes-Oxley Act of 2002, as well as the reporting requirements under the Exchange Act. The Sarbanes-Oxley Act requires, among other things, that we maintain effective disclosure controls and procedures and internal controls over financial reporting. We have tested and concluded that we have remediated the identified material weaknesses in our internal controls that were reported over the years. The substantial efforts and resources the Company has invested achieved remediation of the previously identified weaknesses. However, requirements continue to become more stringent, requiring even more time and resources to be invested to maintain a controlled environment, which is difficult for a small company like ours. Continued additional investments and management time to meet these requirements will be necessary since control weaknesses raise the risk of future material errors in the company’s financial statements. We may not be able to maintain effective controls over time. If we have material weaknesses in the future, this may subject us to SEC enforcement action, which could include monetary fines or other equitable remedies that could be detrimental to the ongoing business of the Company.

19

Table of Contents

We do not intend to pay any cash dividends in the foreseeable future and, therefore, any return on your investment in our common stock must come from increases in the market price of our common stock.

We have not paid any cash dividends on our common stock to date in our history, and we do not intend to pay cash dividends on our common stock in the foreseeable future. We intend to retain future earnings, if any, for reinvestment in the development and expansion of our business. Also, any credit agreements which we may enter into with institutional lenders may restrict our ability to pay dividends. Therefore, any return on your investment in our capital stock must come from increases in the fair market value and trading price of our common stock. Such increases in the trading price of our stock may not occur.

Our certificate of incorporation and bylaws and Delaware law, have provisions that could discourage, delay or prevent a change in control.

Our certificate of incorporation and bylaws and Delaware law contain provisions which could make it more difficult for a third party to acquire us, even if closing such a transaction would be beneficial to our stockholders. We are authorized to issue up to 100,000,000 shares of preferred stock. This preferred stock may be issued in one or more series, the terms of which may be determined at the time of issuance by our Board of Directors without further action by stockholders. The terms of any series of preferred stock may include voting rights (including the right to vote as a series on particular matters), preferences as to dividend, liquidation, conversion and redemption rights and sinking fund provisions. No preferred stock is currently outstanding. The issuance of any preferred stock could materially adversely affect the rights of the holders of our common stock, and therefore, reduce the value of our common stock. In particular, specific rights granted to future holders of preferred stock could be used to restrict our ability to merge with, or sell our assets to, a third party and thereby preserve control by the present management.

Provisions of our certificate of incorporation and bylaws and Delaware law also could have the effect of discouraging potential acquisition proposals or tender offers or delaying or preventing a change in control, including changes a stockholder might consider favorable. Such provisions may also prevent or frustrate attempts by our stockholders to replace or remove our management. In particular, the certificate of incorporation and bylaws and Delaware law, as applicable, among other things:

We are also subject to Section 203 of the Delaware General Corporation Law which, subject to certain exceptions, prohibits “business combinations” between a publicly-held Delaware corporation and an “interested stockholder,” which is generally defined as a stockholder who becomes a beneficial owner of 15% or more of a Delaware corporation’s voting stock for a three-year period following the date that such stockholder became an interested stockholder.

A substantial number of shares of common stock may be sold in the market, which may depress the market price for our common stock.

Sales of a substantial number of shares of our common stock in the public market could cause the market price of our common stock to decline. A substantial majority of the outstanding shares of our common stock are freely tradable without restriction or further registration under the Securities Act. As of December 31, 2021, 948.4 million shares of our common stock are issued and outstanding. In addition, as of December 31, 2021, 123 million shares of our common stock are issuable upon exercise of outstanding warrants, and 42.6 million shares of our common stock are issuable upon exercise of outstanding options.

We may have claims and lawsuits against us that may result in adverse outcomes.

From time to time, we may be subject to a variety of claims and lawsuits. In the past, we were engaged in several shareholder litigations. We believed that that the claims were without merit, fought them vigorously and resolved them. We have also had several small litigations, for example relating to certain payables. Litigation and claims are subject to inherent uncertainties, and adverse rulings or outcomes could occur, and/or could lead to further claims or litigation. Adverse outcomes or further litigation could result in significant monetary damages or injunctive relief that could adversely affect our business and may divert management time and attention from our business.

20

Table of Contents

​

21

Table of Contents

Recent Sales of Unregistered Securities

During the year ended December 31, 2021, the Company issued certain equity securities as set forth in Note 11 (Stockholders’ Deficit) to our financial statements, for the consideration described in such footnote, which disclosure is incorporated into this Item 5. Such securities were issued by the Company pursuant to Section 4(a)(2) of the Securities Act of 1933, as amended, or the provisions of Rule 506 of Regulation D promulgated under the Securities Act. Except as set forth in such note, the Company did not utilize an underwriter or a placement agent for any of these offerings of its securities.

​

ITEM 6. [RESERVED]

​

22

Table of Contents

Overview

We are a biotechnology company focused on developing personalized immune therapies for cancer. We have developed a platform technology, DCVax®, which uses activated dendritic cells to mobilize a patient’s own immune system to attack their cancer.

Our lead product, DCVax®-L, is designed to treat solid tumor cancers in which the tumor can be surgically removed. We have completed a 331-patient international Phase III trial of DCVax-L for Glioblastoma multiforme brain cancer (GBM). As previously reported, the data collection and confirmation process was conducted by the independent contract research organization (CRO) who managed the trial and by other independent service firms.  On October 5, 2020, the Company announced that Data Lock for the Phase III trial had been reached, and that a series of steps and processes would follow. These processes included data validation, analyses of the data by independent statisticians, preparations by the statisticians of summaries of the Trial results for review by the Company, the Principal Investigator, the Steering Committee of the Trial, the Scientific Advisory Board, and a panel of independent brain cancer experts, in preparation for publication in a scientific journal and public announcement.  This series of processes is under way.  It is anticipated that public announcement will follow these processes.

As also previously reported, coronavirus-related difficulties have impacted most aspects of the process, especially with the waves of COVID cases in many areas. The independent service firms have had limited capacity, and restrictions on operations. Key experts at certain specialized service providers have been unavailable for periods of time. Other experts have gone on extended leave. Clinical trial site personnel have been unavailable due to being reassigned for COVID, and the limited site personnel have had to work under restrictions. Committee processes and regulatory processes have been similarly focused on COVID matters and delayed on other matters. Firms such as the ones storing the Phase III trial tissue samples that are needed for certain analyses, and the firms conducting the analyses, continue to have only limited operations. Even logistical matters such as the shipping of materials have been, and continue to be, subjected to substantial difficulties and delays.

On August 28, 2020, the Company acquired Flaskworks, LLC (“Flaskworks”), a company that has developed a system designed to close and automate the manufacturing of cell therapy products such as DCVax®. The Company acquired 100% of the ownership, and Flaskworks became a wholly-owned subsidiary of the Company. Flaskworks was previously owned by its technical founders and Corning Inc. The technical team from Flaskworks joined the Company as part of the Acquisition. It is anticipated that the Flaskworks system will enable substantial scale-up of production volumes of DCVax products and substantial reduction of production costs. The Company’s buildout of the Sawston, UK facility has been designed to proceed in phases, as modules, both for efficiency in the timing of capital costs and to allow flexibility in operations and usage. The Company anticipates that implementation of the Flaskworks system will enable certain phases of the buildout to be simplified and streamlined.  For further details on the financial aspects of the acquisition, please see Item 8 Note 5 below.

Our second product, DCVax®-Direct, is designed to treat inoperable solid tumors. A 40-patient Phase I trial has been completed, and included treatment of a diverse range of more than a dozen types of cancers. The Company plans to work on preparations for Phase II trials of DCVax-Direct as resources permit.

Critical Accounting Policies and Estimates

Our discussion and analysis of our financial condition and results of operations are based on our financial statements, which have been prepared in accordance with U.S. GAAP. The preparation of these financial statements requires us to make estimates and judgments that affect our reported amounts of assets, liabilities, revenues and expenses.

On an ongoing basis, we evaluate our estimates and judgments, including those related to derivative liabilities, accrued expenses and stock-based compensation. We based our estimates on historical experience and on various other assumptions that we believe to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities and the reported amounts of revenues and expenses that are not readily apparent from other sources. Actual results could differ from those estimates, particularly given the significant social and economic disruptions and uncertainties associated with the ongoing coronavirus pandemic (“COVID-19”) and the COVID-19 control responses.

23

Table of Contents

Fair Value Measurements

Fair value is defined as the price that would be received for sale of an asset or paid for transfer of a liability, in an orderly transaction between market participants at the measurement date. U.S. GAAP establishes a three-tier fair value hierarchy that prioritizes the inputs used in measuring fair value. The hierarchy gives the highest priority to unadjusted quoted prices in active markets for identical assets or liabilities (Level 1 measurements) and the lowest priority to unobservable inputs (Level 3 measurements). These tiers include:

We account for the issuance of common stock purchase warrants issued in connection with the equity offerings in accordance with the provisions of ASC 815, Derivatives and Hedging (“ASC 815”). We classify as equity any contracts that (i) require physical settlement or net-share settlement or (ii) gives the Company a choice of net-cash settlement or settlement in its own shares (physical settlement or net-share settlement). We account for certain common stock warrants outstanding as a liability at fair value and adjust the instruments to fair value at each reporting period. This liability is subject to re-measurement at each balance sheet date until exercised, and any change in fair value is recognized in our consolidated statements of operations. The fair value of the warrants issued by us has been estimated using Monte Carlo simulation and or a Black Scholes model. The warrant liabilities are valued using Level 3 valuation inputs.

Derivative Financial Instruments

The Company has derivative financial instruments that are not hedges and do not qualify for hedge accounting. Changes in the fair value of these instruments are recorded in other income (expense), net in the Consolidated Statements of Operations and Comprehensive Loss.

Impairment of Long-Lived Assets

The Company assesses its long-lived assets for impairment whenever facts and circumstances indicate that the carrying amounts may not be fully recoverable. To analyze recoverability, the Company projects undiscounted net future cash flows over the remaining lives of such assets. If these projected cash flows are less than the carrying amounts, an impairment loss would be recognized, resulting in a write-down of the assets with a corresponding charge to earnings. The impairment loss is measured based upon the difference between the carrying amounts and the fair values of the assets. Assets to be disposed of are reported at the lower of the carrying amounts or fair value less cost to sell. Management determines fair value using the discounted cash flow method or other accepted valuation techniques.

As of December 31, 2021 and 2020, the undiscounted net future cash flows of the U.K. property were greater than the carrying value. Therefore, no impairment loss was considered necessary.

Stock Based Compensation

Share-based compensation cost is recorded for all option grants and awards of non-vested stock based on the grant date fair value of the award using the Black-Scholes option-pricing model, and is recognized over the service period required for the award.

We estimate the fair value of stock option grants using the Black-Scholes option pricing model and the assumptions used in calculating the fair value of stock-based awards represent management’s best estimates and involve inherent uncertainties and the application of management’s judgment.

24

Table of Contents

Expected Term - The expected term of options represents the period that the Company’s stock-based awards are expected to be outstanding based on the simplified method, which is the half-life from vesting to the end of its contractual term.

Expected Volatility - The Company computes stock price volatility over expected terms based on its historical common stock trading prices.

Risk-Free Interest Rate - The Company bases the risk-free interest rate on the implied yield available on U. S. Treasury zero-coupon issues with an equivalent remaining term.

Expected Dividend - The Company has never declared or paid any cash dividends on its common shares and does not plan to pay cash dividends in the foreseeable future, and, therefore, uses an expected dividend yield of zero in its valuation models.

We recognize forfeitures when they occur.

Recently Adopted Accounting Standards

Income Taxes

In December 2019, the Financial Accounting Standards Board (“FASB”) issued Accounting Standards Update (“ASU”) No. 2019-12, “Income Taxes (Topic 740): Simplifying the Accounting for Income Taxes (“ASU 2019-12”), which is intended to simplify various aspects related to accounting for income taxes. ASU 2019-12 removes certain exceptions to the general principles in Topic 740 and also clarifies and amends existing guidance to improve consistent application. This guidance is effective for fiscal years, and interim periods within those fiscal years, beginning after December 15, 2020, with early adoption permitted. On January 1, 2021, we adopted this standard without any material impact on our consolidated financial statements and related disclosures.

Debt

In August 2020, the FASB issued ASU No. 2020-06, Debt—Debt with Conversion and Other Options (Subtopic 470-20) and Derivatives and Hedging—Contracts in Entity’s Own Equity (Subtopic 815-40): Accounting for Convertible Instruments and Contracts in an Entity’s Own Equity, which simplifies accounting for convertible instruments by removing major separation models required under current GAAP. The ASU removes certain settlement conditions that are required for equity contracts to qualify for the derivative scope exception and it also simplifies the diluted earnings per share calculation in certain areas. This ASU is effective for annual reporting periods beginning after December 15, 2021, including interim periods within those fiscal years. Early adoption was permitted, but no earlier than fiscal years beginning after December 15, 2020. This update permits the use of either the modified retrospective or fully retrospective method of transition. We adopted the new standard as of January 1, 2021, we adopted this standard without any material impact on our consolidated financial statements and related disclosures.

Recently Issued Accounting Standards Not Yet Adopted

Modifications or Exchanges of Freestanding Equity-Classified Written Call Options

In May 2021, the FASB issued ASU 2021-04, Earnings Per Share (Topic 260), Debt-Modifications and Extinguishments (Subtopic 470-50), Compensation-Stock Compensation (Topic 718), and Derivatives and Hedging-Contracts in Entity’s Own Equity (Subtopic 815-40). This ASU reduces diversity in an issuer’s accounting for modifications or exchanges of freestanding equity-classified written call options (for example, warrants) that remain equity classified after modification or exchange. This ASU provides guidance for a modification or an exchange of a freestanding equity-classified written call option that is not within the scope of another Topic. It specifically addresses: (1) how an entity should treat a modification of the terms or conditions or an exchange of a freestanding equity-classified written call option that remains equity classified after modification or exchange; (2) how an entity should measure the effect of a modification or an exchange of a freestanding equity-classified written call option that remains equity classified after modification or exchange; and (3) how an entity should recognize the effect of a modification or an exchange of a freestanding equity-classified written call option that remains equity classified after modification or exchange. This ASU will be effective for all entities for fiscal years beginning after December 15, 2021. An entity should apply the amendments prospectively to modifications or exchanges occurring on or after the effective date of the amendments. Early adoption is permitted, including adoption in an interim period. The adoption of ASU 2021-04 is not expected to have a material impact on our financial statements or disclosures.

25

Table of Contents

Table of Contents

Research and development expense

For the years ended December 31, 2021, 2020 and 2019, research and development expense was $20.3 million, $33.6 million and $14.1 million, respectively. Research and development expenses included activities and involvement of external consultants as the Phase 3 trial moved through final data collection and query resolution, independent data validation, and other preparations for Data Lock and analyses. The decrease in 2021 compared to 2020 was mainly related to a decrease of $12 million stock-based compensation that represented the vesting of a portion of previously granted equity-based awards, and that was recognized in research and development expense.

We incurred approximately $7.4 million, $7.5 million and $5.7 million in expenses from related parties during the years ended December 31, 2021, 2020 and 2019, respectively.

General and Administrative Expense

General and administrative expenses were $33.4 million, $54.3 million and $16.3 million for the years ended December 31, 2021, 2020 and 2019, respectively. The decrease in 2021 compared to 2020 was mainly related to a decrease of $24.2 million stock-based compensation that represented the vesting of a portion of previously granted equity-based awards, and that was recognized in general and administrative expense, and offset by an increase of approximately $3.3 million related to consulting expenses.

Change in fair value of derivatives

We recognized a non-cash gain of $239.3 million, a non-cash loss of $435.4 million and a non-cash gain of $11.8 million for the years ended December 31, 2021, 2020 and 2019, respectively. The non-cash gain was primarily due to the decrease of our stock price as of December 31, 2021 ($0.70 per share) compared to December 31, 2020 ($1.53 per share). The non-cash loss was primarily due to the increase of our stock price as of December 31, 2020 ($1.53 per share) compared to December 31, 2019 ($0.21 per share).

Debt Extinguishment

During the year ended December 31, 2021, we entered into multiple note extension agreements whereby the maturity dates of the notes were extended for an additional 2-4 months. Certain amendments were accounted for as a debt extinguishment. We recognized $0.2 million debt extinguishment loss from the amendment.

During the year ended December 31, 2020, we converted debt of approximately $12.7 million principal and $1.2 million accrued interest into approximately 58.4 million shares of common stock and 6.2 million warrants. We also extinguished $6.6 million embedded derivative liabilities, wrote off $0.9 million unamortized debt discount and made some debt amendment upon the conversion. We recorded an approximate $1.6 million debt extinguishment loss from the conversion.

Our PPP Loan forgiveness application for Round 1 was approved on December 7, 2020. We recorded approximate $0.4 million debt extinguishment gain from the forgiveness of PPP Loan during the year ended December 31, 2020.

Inducement Expense

During the year ended December 31, 2021, we recorded inducement expense of $0.6 million, which was related to certain warrants exercise.

Interest expense

During the years ended December 31, 2021, 2020 and 2019, we recorded interest expense of $5 million, $8.5 million and $3 million, respectively.

27

Table of Contents

Foreign currency transaction gain

During the years ended December 31, 2021, 2020, and 2019, we recognized foreign currency transaction loss of $1.7 million, gain of $2.3 million and $0.3 million, respectively. The gain was due to the weakening of the U.S. dollar relative to the British pound sterling. The loss was due to the strengthening of the U.S. dollar relative to the British pound sterling.

28

Table of Contents

For a shut down or suspension of the DCVax-L program at Advent, the Company must give 12 months’ advance notice. During the notice period services would still be provided. Minimum required payments for this notice period total approximately £3.8 million ($5.1 million).

As of December 31, 2021, no shut-down or suspension fees were triggered.

Operating Activities

We used $38.3 million, $32.1 million and $31.9 million in cash for operating activities during the years ended December 31, 2021, 2020 and 2019, respectively. The increase in cash used in operating activities was primarily attributable to an increase in clinical trial related expenditures.

Investing Activities

We spent approximately $6 million, $6.6 million and $0.4 million in cash for purchase of additional equipment in the UK and our build out in Sawston, UK during the years ended December 31, 2021, 2020 and 2019, respectively.

We spent approximately $1.5 million related to the Flaskworks acquisition during the year ended December 31, 2020.

Financing Activities

We received approximately $4.1 million, $26.8 million and $6.9 million in cash proceeds from issuance of common stock and warrants, in both public and private offerings during the years ended December 31, 2021, 2020 and 2019, respectively.

We received approximately $20.0 million, $13.9 million and $2.2 million cash proceeds from the exercise of warrants and options during the years ended December 31, 2021, 2020 and 2019, respectively.

We received approximately $29.7 million, $13.7 million and $7.0 million in cash proceeds from the issuance of multiple notes payable during the years ended December 31, 2021, 2020 and 2019, respectively.

We received approximately $0.3 million in cash proceeds from issuances of debt with a related party during the year ended December 31, 2020.

We made aggregate debt payments of $5.8 million and $2.0 million and $6.1 million during the years ended December 31, 2021, 2020 and 2019, respectively.

​

29

Table of Contents

30

Table of Contents

ITEM 9C. DISCLOSURE REGARDING FOREIGN JURISDICTIONS THAT PREVENT INSPECTIONS

None.

​

31

Table of Contents

32

Table of Contents

*Confidential information in this exhibit has been omitted and filed separately with the SEC pursuant to a confidential treatment request.

​

33

Table of Contents

ITEM 16.FORM 10–K SUMMARY

None.

​

34

Table of Contents

F-1

Table of Contents

Table of Contents

Definition and Limitations of Internal Control over Financial Reporting

A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

Critical Audit Matter – Debt and Equity Accounting Considerations

The critical audit matter communicated below are matters arising from the current period audit of the financial statements that were communicated or required to be communicated to the audit committee and that: (1) relate to accounts or disclosures that are material to the financial statements and (2) involved our especially challenging, subjective, or complex judgments. The communication of critical audit matters does not alter in any way our opinion on the consolidated financial statements, taken as a whole, and we are not, by communicating the critical audit matters below, providing separate opinions on the critical audit matters or on the accounts or disclosures to which it relates.

Critical Audit Matter Description

As disclosed in Notes 4, 6, 8, and 11 to the consolidated financial statements, the Company had various debt, derivative, and equity transactions, including stock-based compensation, where management evaluated required accounting considerations, significant estimates, and judgements around certain features, the possibility of conversion or redemption, and the valuation of certain components of the financings, including the valuation around certain freestanding and embedded derivatives. Certain features were initially measured at fair value and subsequently have been remeasured to fair value at each reporting period.

There is no current observable market for these types of features and, as such, the Company determined the fair value of the freestanding instruments or embedded derivatives using the Black-Scholes-Merton model or the Monte Carlo option pricing model, as applicable, to measure the fair value of the debt and/or equity instrument both with and without the derivative liability features. As a result, a high degree of auditor judgment and effort was required in performing audit procedures to evaluate the various components of these instruments.

How the Critical Audit Matter Was Addressed In the Audit

Our principal audit procedures performed to address this critical audit matter included the following:

F-3

Table of Contents

We have served as the Company’s auditors since 2021.

/s/ Cherry Bekaert LLP

Tampa, Florida

March 1, 2022

​

F-4

Table of Contents

Table of Contents

See accompanying notes to the consolidated financial statements

​

F-6

Table of Contents

See accompanying notes to the consolidated financial statements

​

F-7

Table of Contents