UNITED STATES


SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, D.C. 20549

 

FORM 10-Q

 

 

QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

 

 

 

For the quarterly period ended June 30 , 201 4

 

 

 

OR

 

 

 

 

TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

 

 

 

For the transition period from          to          

 

Commission File No 001-31332


LIQUIDMETAL TECHNOLOGIES, INC.

 ( Exact name of Registrant as specified in its charter )

 

Delaware

 

33-0264467

(State or other jurisdiction of

 

(I.R.S. Employer

incorporation or organization)

 

Identification No.)

 

30452 Esperanza

Rancho Santa Margarita, CA 92688

(Address of principal executive offices, zip code)

 

Registrant’s telephone number, including area code: (949) 635-2100  


Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.         

Yes       No  

 

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). 

Yes       No 

 

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer,” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.

 

Large accelerated filer   ☐

Accelerated filer   ☐

Non-accelerated filer   ☐

Smaller reporting company   ☒

 

 

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). 

Yes        No  

 

The number of common shares outstanding as of August 8, 2014 was 463,962,819 .

 

 
 

 

 

LIQUIDMETAL TECHNOLOGIES, INC.
FORM 10-Q
FOR THE QUARTER ENDED
JUNE 30, 2014



FORWARD-LOOKING INFORMATION

 

This Quarterly Report on Form 10-Q of Liquidmetal Technologies, Inc. contains “forward-looking statements” that may state our management’s plans, future events, objectives, current expectations, estimates, forecasts, assumptions or projections about the company and its business. Any statement in this report that is not a statement of historical fact is a forward-looking statement, and in some cases, words such as “believes,” “estimates,” “projects,” “expects,” “intends,” “may,” “anticipates,” “plans,” “seeks,” and similar expressions identify forward-looking statements. Forward-looking statements involve risks and uncertainties that could cause actual outcomes and results to differ materially from the anticipated outcomes or results. These statements are not guarantees of future performance, and undue reliance should not be placed on these statements. It is important to note that our actual results could differ materially from what is expressed in our forward-looking statements due to the risk factors described in the section of our Annual Report on Form 10-K for the year ended December 31, 2013 entitled “Risk Factors ,” as well as the following risks and uncertainties:

 

 

Our ability to fund our operations in the long-term through financing transactions on terms acceptable to us, or at all;

 

Our history of operating losses and the uncertainty surrounding our ability to achieve or sustain profitability;

 

Our limited history of developing and selling products made from our bulk amorphous alloys;

 

Our limited history in licensing our technology to third parties;

 

Lengthy customer adoption cycles and unpredictable customer adoption practices;

 

Our ability to identify, develop, and commercialize new product applications for our technology;

 

Competition from current suppliers of incumbent materials or producers of competing products;

 

Our ability to identify, consummate, and/or integrate strategic partnerships;

 

The potential for manufacturing problems or delays; and

 

Potential difficulties associated with protecting or expanding our intellectual property position.

 

We undertake no obligation to update publicly any forward-looking statements, whether as a result of new information, future events or otherwise.

 

 
2

 

 

TABLE OF CONTENTS

 

PART I - Financial Information

   
         
 

Item 1 – Financial Statements

 

4

   

Consolidated Balance Sheets

   
   

Consolidated Statements of Operations and Comprehensive Loss

   
   

Consolidated Statement of Shareholders’ Equity (Deficit)

   
   

Consolidated Statements of Cash Flows

   
   

Notes to Consolidated Financial Statements

   
         
 

Item 2 – Management’s Discussion and Analysis of Financial Condition and Results of Operations

18

         
 

Item 3 – Quantitative and Qualitative Disclosures about Market Risk

 

23

         
 

Item 4 – Controls and Procedures

 

23

         

PART II – Other Information

   
         
 

Item 1 – Legal Proceedings

 

24

         
 

Item 1A – Risk Factors

 

24

         
 

Item 2 – Unregistered Sales of Equity Securities and Use of Proceeds

 

24

         
 

Item 3 – Defaults Upon Senior Securities

 

24

         
 

Item 4 – Mine Safety Disclosures

 

24

         
 

Item 5 – Other Information

 

24

         
 

Item 6 – Exhibits

 

25

         

Signatures

   

 

 
3

 

 

PART I

FINANCIAL INFORMATION

Item 1 – Financial Statements

 

LIQUIDMETAL TECHNOLOGIES, INC. AND SUBSIDIARIES

CONSOLIDATED BALANCE SHEETS

(in thousands, except par value and share data)

 

   

June 30,

   

December 31,

 
   

2014

   

2013

 
   

(Unaudited)

   

(Audited)

 

ASSETS

               
                 

Current assets:

               

Cash

  $ 13,894     $ 2,062  

Trade accounts receivable, net of allowance for doubtful accounts

    68       215  

Prepaid expenses and other current assets

    234       412  

Total current assets

  $ 14,196     $ 2,689  

Property and equipment, net

    756       249  

Patents and trademarks, net

    712       764  

Other assets

    349       401  

Total assets

  $ 16,013     $ 4,103  
                 

LIABILITIES AND STOCKHOLDERS' DEFICIT

               
                 

Current liabilities:

               

Accounts payable

    107       361  

Accrued liabilities

    696       710  

Convertible notes, net of debt discount

    -       -  

Embedded conversion feature liabilities on convertible notes

    -       -  

Total current liabilities

  $ 803     $ 1,071  
                 

Long-term liabilities:

               

Warrant liabilities

    6,792       4,921  

Other long-term liabilities

    856       856  

Total liabilities

  $ 8,451     $ 6,848  
                 

Stockholders' equity (deficit):

               

Preferred Stock, $0.001 par value; 10,000,000 shares authorized; 0 shares issued and outstanding at June 30, 2014 and December 31, 2013.

    -       -  

Common stock, $0.001 par value; 700,000,000 shares authorized at June 30, 2014 and December 31, 2013; 462,754,819 and 375,707,190 shares issued and outstanding at June 30, 2014 and December 31, 2013, respectively

    463       376  

Warrants

    18,179       18,179  

Additional paid-in capital

    199,473       182,832  

Accumulated deficit

    (210,503 )     (204,090 )

Non-controlling interest in subsidiary

    (50 )     (42 )

Total stockholders' equity (deficit)

    7,562       (2,745 )

Total liabilities and stockholders' equity (deficit)

  $ 16,013     $ 4,103  

 

The accompanying notes are an integral part of the consolidated financial statements.

 

 
4

 

   

LIQUIDMETAL TECHNOLOGIES, INC. AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF OPERATIONS and COMPREHENSIVE LOSS

(in thousands, except share and per share data)

(unaudited)

   

   

For the Three Months

Ended June 30,

   

For the Six Months

Ended June 30,

 
   

2014

   

2013

   

2014

   

2013

 
                                 

Revenue

                               

Products

  $ 121     $ 150     $ 277     $ 265  

Licensing and royalties

    32       -       36       7  

Total revenue

    153       150       313       272  
                                 

Cost of sales

    75       111       215       193  
                                 

Gross profit

    78       39       98       79  
                                 

Operating expenses

                               

Selling, marketing, general and administrative

    2,021       1,209       3,872       2,523  

Research and development

    392       224       726       460  

Total operating expenses

    2,413       1,433       4,598       2,983  

Operating loss

    (2,335 )     (1,394 )     (4,500 )     (2,904 )
                                 

Change in value of warrants, gain (loss)

    (145 )     286       (1,871 )     796  

Change in value of embedded conversion feature liabilities, gain

    -       1,378       -       3,056  

Debt discount amortization expense

    (31 )     (2,108 )     (52 )     (6,143 )

Interest expense

    -       (80 )     -       (221 )

Interest income

    2       1       2       4  
                                 

Net loss

    (2,509 )     (1,917 )     (6,421 )     (5,412 )
                                 

Net loss attributable to non-controlling interest

    5       8       8       8  

Net loss and comprehensive loss attributable to Liquidmetal Technologies shareholders

  $ (2,504 )   $ (1,909 )   $ (6,413 )   $ (5,404 )
                                 
                                 

Net loss per common share attributable to Liquidmetal Technologies shareholders, basic and diluted

  $ (0.01 )   $ (0.01 )   $ (0.02 )   $ (0.02 )
                                 

Number of weighted average shares - basic and diluted

    449,401,890       335,472,213       418,501,883       309,073,707  

 

The accompanying notes are an integral part of the consolidated financial statements.

 

 
5

 

 

LIQUIDMETAL TECHNOLOGIES, INC. AND SUBSIDIARIES

CONSOLIDATED STATEMENT OF STOCKHOLDERS ' EQUITY ( DEFICIT)

For the Six Months Ended June 30, 2014

(in thousands, except share data)

(unaudited)

 

   

Preferred Shares

   

Common

Shares

   

Common

Stock

   

Warrants part of Additional Paid-in Capital

   

Additional

Paid-in

Capital

   

Accumulated

Deficit

   

Non Controlling Interest

   

Total

 
                                                                 

Balance, December 31, 2013

    -       375,707,190     $ 376     $ 18,179     $ 182,832     $ (204,090 )   $ (42 )   $ (2,745 )
                                                                 

Common stock issuance

            85,355,615       85               15,915                       16,000  

Stock option exercises

            1,692,014       2               144                       146  

Stock-based compensation

                                    426                       426  

Restricted stock issued to officer

                                    156                       156  

Net loss

                                            (6,413 )     (8 )     (6,421 )
                                                                 
                                                                 

Balance, June 30, 2014

    -       462,754,819     $ 463     $ 18,179     $ 199,473     $ (210,503 )   $ (50 )   $ 7,562  

 

The accompanying notes are an integral part of the consolidated financial statements.

 

 
6

 

 

LIQUIDMETAL TECHNOLOGIES, INC. AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF CASH FLOWS

(in thousands, except per share data)

(unaudited)

 

   

Six Months Ended June 30,

 
   

2014

   

2013

 
                 

Operating activities:

               

Net loss

  $ (6,421 )   $ (5,412 )
                 

Adjustments to reconcile net loss to net cash used in operating activities:

               

Depreciation and amortization

    104       106  

(Gain) loss on sale of fixed asset

    (5 )     -  

Bad debt expense

    -       14  

Stock-based compensation

    426       84  

Restricted stock compensation issued to officer

    156       156  

Loss (Gain) from change in value of warrants

    1,871       (796 )

Gain from change in value of embedded conversion feature liabilities

    -       (3,056 )

Debt discount amortization

    52       6,143  

Non-cash interest expense

    -       221  
                 

Changes in operating assets and liabilities:

               

Trade accounts receivable

    147       (91 )

Prepaid expenses and other current assets

    178       (294 )

Accounts payable and accrued expenses

    (268 )     142  

Net cash used in operating activities

    (3,760 )     (2,783 )
                 

Investing Activities:

               

Purchases of property and equipment

    (558 )     (165 )

Proceeds from sale of fixed assets

    5       -  

Investment in patents and trademarks

    (1 )     (6 )

Net cash used in investing activities

    (554 )     (171 )
                 

Financing Activities:

               

Proceeds from exercise of stock options

    146       -  

Proceeds from stock issuance

    16,000       -  

Net cash provided by financing activities

    16,146       -  
                 

Net increase (decrease) in cash

    11,832       (2,954 )
                 

Cash at beginning of period

    2,062       7,162  

Cash at end of period

  $ 13,894     $ 4,208  
                 

Supplemental Schedule of Non-Cash Investing and Financing Activities:

               

Pre-installment payment of convertible debt and interest through common stock issuance

    -       6,180  

Dividends paid in common stock upon preferred stock conversion

    -       222  

 

The accompanying notes are an integral part of the consolidated financial statements.

 

 
7

 

 

LIQUIDMETAL TECHNOLOGIES, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
For the Six
Months Ended June 30, 2014 and 2013

(numbers in thousands, except share and per share data)

(unaudited)

 

1. Description of Business

 

Liquidmetal Technologies, Inc. (the “Company”) is a materials technology company that develops and commercializes products made from amorphous alloys. The Company’s family of alloys consists of a variety of proprietary bulk alloys and composites that utilize the advantages offered by amorphous alloy technology. The Company designs, develops and sells products and components from bulk amorphous alloys to customers in various industries. The Company also partners with third-party manufacturers and licensees to develop and commercialize Liquidmetal alloy products.

 

Amorphous alloys are, in general, unique materials that are distinguished by their ability to retain a random atomic structure when they solidify, in contrast to the crystalline atomic structures that form in other metals and alloys when they solidify. Liquidmetal alloys are proprietary amorphous alloys that possess a combination of performance, processing, and potential cost advantages that the Company believes will make them preferable to other materials in a variety of applications. The amorphous atomic structure of the Company’s alloys enables them to overcome certain performance limitations caused by inherent weaknesses in crystalline atomic structures, thus facilitating performance and processing characteristics superior in many ways to those of their crystalline counterparts. For example, in laboratory testing, zirconium-titanium Liquidmetal alloys are approximately 250% stronger than commonly used titanium alloys such as Ti-6Al-4V, but they also have some of the beneficial processing characteristics more commonly associated with plastics. The Company believes these advantages could result in Liquidmetal alloys supplanting high-performance alloys, such as titanium and stainless steel, and other incumbent materials in a variety of applications. Moreover, the Company believes these advantages could enable the introduction of entirely new products and applications that are not possible or commercially viable with other materials.

 

The Company’s revenues are derived from i) selling bulk Liquidmetal alloy products, which include non-consumer electronic devices, aerospace parts, medical products, automotive components, oil and gas exploration, and sports and leisure goods, ii) selling tooling and prototype parts such as demonstration parts and test samples for customers with products in development, iii) product licensing and royalty revenue, and iv) research and development revenue.

 

2 . Basis of Presentation and Recent Accounting Pronouncements

 

The accompanying unaudited interim consolidated financial statements as of and for the six months ended June 30, 2014 have been prepared in accordance with accounting principles generally accepted in the United States of America (“generally accepted accounting principles”) for interim financial information and with the instructions to Form 10-Q. Accordingly, they do not include all of the information and notes required by generally accepted accounting principles for complete financial statements. In the opinion of management, all adjustments (consisting only of normal recurring accruals) considered necessary for a fair presentation have been included. All intercompany balances and transactions have been eliminated in consolidation. Operating results for the three and six month periods ended June 30, 2014 are not necessarily indicative of the results that may be expected for any future periods or the year ending December 31, 2014. The accompanying unaudited consolidated financial statements should be read in conjunction with the Company's 2013 Annual Report on Form 10-K filed with the Securities and Exchange Commission on March 5, 2014.

 

Revenue Recognition

 

Revenue is recognized pursuant to applicable accounting standards including FASB ASC Topic 605 (“ASC 605”), Revenue Recognition. ASC 605 summarizes certain points of the SEC staff’s views in applying generally accepted accounting principles to revenue recognition in financial statements and provides guidance on revenue recognition issues in the absence of authoritative literature addressing a specific arrangement or a specific industry .

 

The Company’s revenue recognition policy complies with the requirements of ASC 605. Revenue is recognized when (i) persuasive evidence of an arrangement exists, (ii) delivery has occurred, (iii) the sales price is fixed or determinable, (iv) collection is probable and (v) all obligations have been substantially performed pursuant to the terms of the arrangement. Revenues are derived primarily from the sales and prototyping of Liquidmetal mold and bulk alloys as well as licensing and royalties for the use of the Liquidmetal brand and bulk Liquidmetal alloys. Revenue is deferred and included in liabilities when the Company receives cash in advance for goods not yet delivered or if the licensing term has not begun.

 

License revenue arrangements in general provide for the grant of certain intellectual property rights for patented technologies owned or controlled by the Company. These rights typically include the grant of an exclusive or non-exclusive right to manufacture and/or sell products covered by patented technologies owned or controlled by the Company. The intellectual property rights granted may be perpetual in nature, extending until the expiration of the related patents, or can be granted for a defined period of time.

 

Licensing revenues that are one time fees upon the granting of the license are recognized when (i) the license term begins in a manner consistent with the nature of the transaction and the earnings process, (ii) collectability is reasonably assured or upon receipt of an upfront fee, and (iii) all other revenue recognition criteria have been met. Pursuant to the terms of these types of licensing agreements, the Company has no further obligation with respect to the grant of the license once the license is granted. Licensing revenues that are related to royalties are recognized as the royalties are earned over the related period.

 

 
8

 

 

LIQUIDMETAL TECHNOLOGIES, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
For the Six
Months Ended June 30, 2014 and 2013

(numbers in thousands, except share and per share data)

(unaudited)

 

Fair Value Measurements

 

The estimated fair values of amounts reported in the consolidated financial statements have been determined using available market information and valuation methodologies, as applicable. The fair value of cash, trade receivables, prepaid expenses and other current assets, accounts payable, and accrued liabilities approximate their carrying value due to their short maturities. The fair value of non-current assets and liabilities approximate their carrying value unless otherwise stated.

 

Fair value is defined as the exchange price that would be received for an asset or paid to transfer a liability (an exit price) in the principal or most advantageous market for the asset or liability in an orderly transaction between market participants on the measurement date. Entities are required to maximize the use of observable inputs and minimize the use of unobservable inputs when measuring fair value based upon the following fair value hierarchy:

 

Level 1 —

Quoted prices in active markets for identical assets or liabilities;

 

Level 2 —

Observable inputs other than Level 1 prices, such as quoted prices for similar assets or liabilities; quoted prices in markets that are not active; or other inputs that are observable or can be corroborated by observable market data for substantially the full term of the assets or liabilities; and

 

Level 3 —

Unobservable inputs that are supported by little or no market activity and that are significant to the fair value of the assets or liabilities.

 

The Company has one Level 2 financial instrument, that being liability classified warrants that are recorded at fair value on a periodic basis. Warrants are evaluated under the hierarchy of FASB ASC Subtopic 480-10, FASB ASC Paragraph 815-25-1 and FASB ASC Subparagraph 815-10-15-74 addressing embedded derivatives. The fair value of such warrants is estimated using the Black-Scholes option pricing model. The foregoing warrants have certain anti-dilution and exercise price reset provisions which qualify the warrants to be classified as a liability under FASB ASC 815 (see note 8).

 

The Company had one Level 3 financial instrument during the six months ended June 30, 2013, that being an embedded conversion feature that was accounted for as a derivative and recorded at fair value on a periodic basis. The embedded derivative was evaluated under the hierarchy of FASB ASC Subtopic 480-10, FASB ASC Paragraph 815-25-1 and FASB ASC Subparagraph 815-10-15-74 addressing embedded derivatives. The fair value of such embedded derivative was estimated using the Monte Carlo simulation model. The foregoing embedded derivative had certain anti-dilution and exercise price reset provisions which qualified the embedded derivative to be classified as a liability under FASB ASC 815. Upon the final settlement of the senior convertible notes issued in the July 2012 Private Placement (as defined below), this liability was extinguished as the underlying conversion option had been executed. As such, the fair value of the liability was reduced to zero upon conversion during the third quarter of 2013 (see note 7).

 

As of June 30, 2014, the following table represents the Company’s fair value hierarchy for items that are required to be measured at fair value on a recurring basis:

 

 

   

Fair Value

   

Level 1

   

Level 2

   

Level 3

 
                                 

Warrant liabilities

    6,792       -       6,792       -  

 

 

Recent Accounting Pronouncements

 

Offsetting Assets and Liabilities

 

In December 2011 and January 2013, the FASB issued accounting standards updates modifying the disclosure requirements about the nature of an entity's rights of offsetting assets and liabilities in the consolidated balance sheet under master netting agreements and related arrangements associated with financial and derivative instruments. The guidance requires increased disclosure of the gross and net recognized assets and liabilities, collateral positions and narrative descriptions of setoff rights. The adoption of this pronouncement did not have a material impact on the Company’s Consolidated Financial Statements and accompanying disclosures.

 

Presentation of Items Reclassified out of Accumulated Other Comprehensive Income

 

In February 2013, the FASB issued an accounting standards update which requires disclosure related to items reclassified out of accumulated other comprehensive income (“AOCI”). The guidance requires entities to present separately, for each component of other comprehensive income (“OCI”), current period reclassifications and the remainder of the current-period OCI. In addition, for certain current period reclassifications, an entity is required to disclose the effect of the item reclassified out of AOCI on the respective line item of net income. The adoption of this pronouncement did not have a material impact on the Company’s Consolidated Financial Statements and accompanying disclosures.

 

 
9

 

 

LIQUIDMETAL TECHNOLOGIES, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
For the Six
Months Ended June 30, 2014 and 2013

(numbers in thousands, except share and per share data)

(unaudited)

 

Joint and Several Liabilities

 

In February 2013, the FASB issued an accounting standards update which modifies the requirements for the recognition, measurement, and disclosure of obligations resulting from joint and several liability arrangements for which the total amount of the obligation is fixed at the reporting date. The guidance requires companies to measure these obligations as the sum of the amount the company has agreed with co-obligors to pay and any additional amount it expects to pay on behalf of one or more co-obligors. The adoption of this pronouncement did not have a material impact on the Company’s Consolidated Financial Statements and accompanying disclosures.

 

Presentation of Unrecognized Tax Benefits

 

In July 2013, the FASB issued an accounting standards update which will require that an unrecognized tax benefit be presented on the balance sheet as a reduction of a deferred tax asset for a net operating loss or tax credit carryforward under certain circumstances. The adoption of this pronouncement did not have a material impact on the Company’s Consolidated Financial Statements and accompanying disclosures.

 

Revenue from Contracts with Customers

 

In May 2014, the FASB issued an accounting standards update which modifies the requirements for identifying, allocating, and recognizing revenue related to the achievement of performance conditions under contracts with customers. This update also requires additional disclosure related to the nature, amount, timing, and uncertainty of revenue that is recognized under contracts with customers. This guidance is effective beginning January 1, 2017 and is required to be applied retrospectively to all revenue arrangements. The Company is currently assessing the effects this guidance may have on its consolidated financial statements.

 

Other recent accounting pronouncements issued by the FASB (including its Emerging Issues Task Force), the AICPA and the SEC did not or are not believed by management to have a material impact on the Company's present or future consolidated financial statements.

 

 

3 . Significant Transactions

 

 

2013 Stock Purchase Agreement

 

On November 8, 2013, the Company entered into a Common Stock Purchase Agreement (the “2013 Purchase Agreement”) with Kingsbrook Opportunities Master Fund LP, Tech Opportunities LLC, and Iroquois Master Fund Ltd. (each, a “2013 Investor” and collectively, the “2013 Investors”). The 2013 Purchase Agreement provides that, upon the terms and subject to the conditions set forth therein, each of the 2013 Investors has committed to purchase such 2013 Investor’s pro rata portion of up to $20,000 (the “Total Commitment”) worth of the Company’s common stock, $0.001 par value (the “Shares”), over the 36-month term of the 2013 Purchase Agreement. In consideration for the execution and delivery of the 2013 Purchase Agreement, on November 8, 2013, the Company issued 2,666,667 shares of common stock (“the Commitment Shares”) to the 2013 Investors.

 

From time to time over the term of the 2013 Purchase Agreement, the Company may, at its sole discretion, provide each of the 2013 Investors with draw down notices (each a “Draw Down Notice”) to purchase a specified dollar amount of Shares (the “Draw Down Amount”) over a five (5) consecutive trading day period commencing on the trading day specified in the applicable Draw Down Notice (the “Pricing Period”) with each draw down subject to the limitations discussed below. The maximum amount of Shares requested to be purchased pursuant to any single Draw Down Notice cannot exceed a dollar amount equal to the lesser of (i) 300% of the average trading volume of the Company’s common stock during the ten (10) trading days immediately preceding the date the applicable Draw Down Notice is delivered (the “Applicable Draw Down Exercise Date”) multiplied by the lower of (A) the closing trade price of the Company’s common stock on the trading day immediately preceding the Applicable Draw Down Exercise Date and (B) the average of the closing trade prices of our common stock for the three (3) trading days immediately preceding the Applicable Draw Down Exercise Date (such lower price, the “Reference Price”), and (ii) a specified dollar amount set forth in the 2013 Purchase Agreement based on the Reference Price as of the Applicable Draw Down Exercise Date.

 

Once presented with a Draw Down Notice, each of the 2013 Investors is required to purchase such 2013 Investor’s pro rata portion of the applicable Draw Down Amount on each trading day during the applicable Pricing Period on which the daily volume weighted average price for the Company’s common stock (the “VWAP”) equals or exceeds an applicable floor price equal to the product of (i) 0.775 and (ii) the Reference Price, subject to adjustment (the “Floor Price”), provided that in no event shall the Floor Price be less than $0.03875. If the VWAP falls below the applicable Floor Price on any trading day during the applicable Pricing Period, the 2013 Purchase Agreement provides that the 2013 Investors will not be required to purchase their pro rata portions of the applicable Draw Down Amount allocated to that trading day. The per share purchase price for the Shares subject to a Draw Down Notice shall be equal to 90% of the lowest daily VWAP that equals or exceeds the applicable Floor Price during the applicable Pricing Period. Each purchase pursuant to a draw down shall reduce, on a dollar-for-dollar basis, the Total Commitment under the 2013 Purchase Agreement.

 

 
10

 

 

LIQUIDMETAL TECHNOLOGIES, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
For the Six
Months Ended June 30, 2014 and 2013

(numbers in thousands, except share and per share data)

(unaudited)

   

The Company is prohibited from issuing a Draw Down Notice if (i) the amount requested in such Draw Down Notice exceeds the Maximum Draw Down Amount, (ii) the sale of Shares pursuant to such Draw Down Notice would cause the Company to issue or sell or the 2013 Investors to acquire or purchase an aggregate dollar value of Shares that would exceed the Total Commitment, (iii) the sale of Shares pursuant to the Draw Down Notice would cause the Company to sell or the 2013 Investors to purchase an aggregate number of shares of the Company’s common stock which would result in the collective beneficial ownership by the 2013 Investors of more than 9.99% of the Company’s common stock (as calculated pursuant to Section 13(d) of the Securities Exchange Act of 1934, as amended, and the rules and regulations thereunder), or (iv) the applicable Floor Price would be less than $0.03875 on the Applicable Draw Down Exercise Date. The Company cannot make more than one draw down in any Pricing Period and must allow two (2) trading days to elapse between the completion of the settlement of any one draw down and the commencement of a Pricing Period for any other draw down.

 

On February 11, 2014, an initial registration statement covering 96,555,893 shares issued and issuable pursuant to the 2013 Purchase Agreement was declared effective by the SEC.

 

As of June 30, 2014, the Company has received an aggregate of $16,000 under the 2013 Purchase Agreement through the issuance of 85,355,615 shares of its common stock at a weighted average price of $0.19 per share.

 

July 2012 Private Placement

 

On July 2, 2012, the Company entered into a private placement transaction (the “July 2012 Private Placement”) pursuant to which the Company issued $12,000 in principal amount of senior convertible notes that were due on September 1, 2013. The notes were convertible into shares of the Company’s common stock at a conversion price of $0.352 per share. The notes bore interest at 8% per annum and were payable in twelve equal monthly installments of principal and interest beginning on October 1, 2012. Each monthly installment payment was payable in cash, shares of the Company’s common stock, or a combination thereof. If paid in shares, such shares were valued at the lower of (i) the then applicable conversion price or (ii) a price that was 87.5% of the arithmetic average of the ten (or in some cases fewer) lowest weighted average prices of the Company’s common stock during the twenty trading day period ending two trading days before the payment date or the date on which the Company elected to pay in shares, whichever was lower. As of July 17, 2013, the Company had issued 163,641,547 shares of common stock in full satisfaction of the notes (see note 7).

 

As a part of the July 2012 Private Placement, the Company issued warrants to purchase 18,750,000 shares of the Company’s common stock at an exercise price of $0.384 per share (reduced to $0.35 per share under the anti-dilution provision of the warrants, see note 8), and such warrants first became exercisable on January 2, 2013 which was six months after the issuance date thereof. In the event that the Company issues or sells shares of the Company’s common stock at a price per share that is less than the exercise price then in effect, the exercise price of the warrants will be reduced based on a weighted-average formula. In addition, on the two year anniversary of the issuance date, the then applicable exercise price will be reset to equal the lesser of (i) the then current exercise price or (ii) 87.5% of the arithmetic average of the ten lowest weighted average prices of the common stock during the twenty trading day period ending two trading days immediately preceding the reset date. All of the warrants will expire on July 2, 2017 (see note 8).

 

June 2012 Visser MTA Agreement

 

On June 1, 2012, the Company entered into a Master Transaction Agreement (the “Visser MTA Agreement”) with Visser Precision Cast, LLC (“Visser”) relating to a strategic transaction for manufacturing services and financing.

 

Under the manufacturing and service component of the Visser MTA Agreement, the Company had agreed to engage Visser as a perpetual, exclusive manufacturer of non-consumer electronic products and to not, directly or indirectly, conduct manufacturing operations, subcontract for the manufacture of products or components or grant a license to any other party to conduct manufacturing operations, except for certain limited exceptions. Under the financing component of the Visser MTA Agreement, the Company issued and sold to Visser in a private placement transaction (i) 30,000,000 shares of common stock at a purchase price of $0.10 per share resulting in proceeds of $3,000, (ii) warrants to purchase 15,000,000 shares of common stock at an original exercise price of $0.22 per share which were to expire on June 1, 2017 and (iii) a secured convertible promissory note in the aggregate principal amount of up to $2,000. No borrowings were made by the Company under the promissory note, and the deadline for making borrowings under the facility expired on November 15, 2012.

 

In November 2013, the Company and Visser entered into arbitration proceedings to resolve disputes associated with the Visser MTA Agreement.

 

On May 20, 2014, the Company and Visser agreed to terminate the existing arbitration proceedings, release each other from all claims they may have had against each other and substantially change the business relationship that had been reflected in the original Visser MTA Agreement. As part of the settlement, the parties have amended and restated the sublicense and financing components of the Visser MTA Agreement. Additionally, the manufacturing services component and remaining considerations of the Visser MTA Agreement were terminated.

 

 
11

 

 

LIQUIDMETAL TECHNOLOGIES, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
For the Six
Months Ended June 30, 2014 and 2013

(numbers in thousands, except share and per share data)

(unaudited)

    

Under the amended and restated sublicense agreement, the Company has granted to Visser a fully paid-up, royalty-free, irrevocable, perpetual, worldwide, non-transferable, nonexclusive sublicense to all of the Company’s intellectual property developed on or prior to May 20, 2014 (the “Effective Date”), for all fields of use other than certain excluded fields as set forth therein. Visser does not have any rights, now or in the future, to intellectual property of the Company developed after the Effective Date of the agreement. The license to the Company’s intellectual property developed on or prior to the Effective Date does not include the right to use the “Liquidmetal” trademark or any of the Company’s other trademarks, except in certain defined situations, as set forth in the amended and restated agreement.

 

With the foregoing revised arrangements, the Company is no longer required to use Visser as its exclusive manufacturer and is free to license other manufacturers on a non-exclusive basis in any industry or geographic market as to which the Company has not previously granted an exclusive license to a third party. Any such manufacturers licensed by the Company in the future will be able both to manufacture parts for the Company and the Company’s customers , and manufacture and sell products for their own account for such industries or markets as the Company may agree, subject to whatever royalty arrangements the Company may negotiate. The Company has not yet licensed any manufacturers other than Visser. Visser will also have the right to manufacture and sell products under the amended and restated sublicense agreement.

 

The amended and restated financing aspect amends and restates two warrants the Company issued to Visser in June 2012 to purchase 15,000,000 shares of the Company’s common stock at an exercise price of $0.22 per share. Those warrants contained anti-dilution mechanisms under which the number of shares issuable upon exercise of those warrants would be increased, and the exercise price for such shares would be reduced if the Company issued shares of its common stock at prices less than the warrants’ exercise price. The amended and restated warrant agreement includes the effect of such anti-dilution adjustments and is exercisable for 18,611,079 shares of common stock (increased to 18,706,235 shares under the anti-dilution provisions of the warrants, see note 8) at an exercise price of $0.18 per share. The amended and restated warrant agreement continues to contain comparable anti-dilution adjustment mechanisms. The amended and restated warrant agreement also removes certain lock-up provisions that were included in the original warrants.

 

Apple License Transaction

 

On August 5, 2010, the Company entered into a license transaction with Apple Inc. (“Apple”) pursuant to which (i) the Company contributed substantially all of its intellectual property assets to a newly organized special-purpose, wholly-owned subsidiary, called Crucible Intellectual Property, LLC (“CIP”), (ii) CIP granted to Apple a perpetual, worldwide, fully-paid, exclusive license to commercialize such intellectual property in the field of consumer electronic products, as defined in the license agreement, in exchange for a license fee, and (iii) CIP granted back to the Company a perpetual, worldwide, fully-paid, exclusive license to commercialize such intellectual property in all other fields of use. Additionally, in connection with the license transaction, Apple required the Company to complete a statement of work related to the exchange of Liquidmetal intellectual property information. The Company recognized a portion of the one-time license fee upon receipt of the initial payment and completion of the foregoing requirements under the license transaction. The remaining portion of the one-time license fee was recognized at the completion of the required statement of work.

 

Under the agreements relating to the license transaction with Apple, the Company was obligated to contribute, to CIP, all intellectual property that it developed through February 2012. Subsequently, this obligation has been extended to apply to all intellectual property developed through February 2015. The Company is also obligated to maintain certain limited liability company formalities with respect to CIP at all times after the closing of the license transaction.

 

Other License Transactions

 

On January 31, 2012, the Company entered into a Supply and License Agreement for a five year term with Engel Austria Gmbh (“Engel”) whereby Engel was granted a non-exclusive license to manufacture and sell injection molding machines to the Company’s licensees. Since that time, the Company and Engel have agreed on an injection molding machine configuration that can be commercially supplied and supported by Engel.  On December 6, 2013, the companies entered into an Exclusive License Agreement for a 10 year term whereby Engel was granted an exclusive license to manufacture and sell injection molding machines to the Company’s licensees in exchange for certain royalties to be paid by Engel to the Company based on a percentage of the net sales price of such injection molding machines.

 

The Company’s Liquidmetal Golf subsidiary has the exclusive right and license to utilize the Company’s Liquidmetal alloy technology for purposes of golf equipment applications. This right and license is set forth in an intercompany license agreement between Liquidmetal Technologies and Liquidmetal Golf. This license agreement provides that Liquidmetal Golf has a perpetual and exclusive license to use Liquidmetal alloy technology for the purpose of manufacturing, marketing, and selling golf club components and other products used in the sport of golf. The Company owns 79% of the outstanding common stock of Liquidmetal Golf.

 

In June 2003, the Company entered into an exclusive license agreement with LLPG, Inc. (“LLPG”).  Under the terms of the agreement, LLPG has the right to commercialize Liquidmetal alloys, particularly precious-metal based compositions, in jewelry and high-end luxury product markets.  The Company, in turn, will receive royalty payments over the life of the contract on all Liquidmetal products produced and sold by LLPG. The exclusive license agreement with LLPG expires on December 31, 2021.

 

 
12

 

 

LIQUIDMETAL TECHNOLOGIES, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
For the Six
Months Ended June 30, 2014 and 2013

(numbers in thousands, except share and per share data)

(unaudited)

   

In March 2009, the Company entered into a license agreement with Swatch Group, Ltd. (“Swatch”) under which Swatch was granted a perpetual non-exclusive license to the Company’s technology to produce and market watches and certain other luxury products. In March 2011, this license agreement was amended to grant Swatch exclusive rights as to watches, and the Company’s license agreement with LLPG was simultaneously amended to exclude watches from LLPG’s rights. The Company will receive royalty payments over the life of the contract on all Liquidmetal products produced and sold by Swatch. The license agreement with Swatch will expire on the expiration date of the last licensed patent.

 

4 . Liquidity and Capital Resources

 

For the six months ended June 30, 2014, the Company’s cash used in operations was $3,760, cash used in investing activities was $554, and cash provided by financing activities was $16,146. As of June 30, 2014, the Company’s cash balance was $13,894.

 

On November 8, 2013, the Company entered into the 2013 Purchase Agreement that will allow it to raise up to $20,000 through periodic issuances of common stock over a three year period. As of June 30, 2014, the Company had received an aggregate of $16,000 under the 2013 Purchase Agreement through the issuance of 85,355,615 shares of its common stock at a weighted average price of $0.19 per share.

 

The Company anticipates that its current capital resources, when considering expected losses from operations, will be sufficient to fund the Company’s operations through the end of 2015. The Company has a relatively limited history of producing bulk amorphous alloy components and products on a mass-production scale. Furthermore, the ability of future contract manufacturers to produce the Company’s products in desired quantities and at commercially reasonable prices is uncertain and is dependent on a variety of factors that are outside of the Company’s control, including the nature and design of the component, the customer’s specifications, and required delivery timelines. These factors will likely require that the Company continue to make draw-downs under the 2013 Purchase Agreement, raise additional funds by other means, or pursue other strategic initiatives to support its operations beyond the end of 2015. There is no assurance that the Company will be able to continue to make draw-downs under the 2013 Purchase Agreement or raise additional funds by other means on acceptable terms, if at all. If the Company were to continue to make draw-downs under the 2013 Purchase Agreement or to raise additional funds through other means by issuing securities, existing stockholders may be diluted. If funding is insufficient at any time in the future, the Company may be required to alter or reduce the scope of its operations or to cease operations entirely. Uncertainty as to the outcome of these factors raises substantial doubt about the Company’s ability to continue as a going concern.

 

5 . P repaid Expenses and Other Current Assets

 

Prepaid expenses and other current assets totaled $234 and $412 as of June 30, 2014 and December 31, 2013, respectively and primarily consisted of prepaid invoices and insurance premiums that will be reclassified to expense as shipments are made to customers or services are provided.

 

6 . Patents and T rademarks, net

 

Net patents and trademarks totaled $712 and $764 as of June 30, 2014 and December 31, 2013, respectively, and it primarily consisted of purchased patent rights and internally developed patents.

 

Purchased patent rights represent the exclusive right to commercialize the bulk amorphous alloy and other amorphous alloy technology acquired from California Institute of Technology (“Caltech”), through a license agreement with Caltech and other institutions. All fees and other amounts payable by the Company for these rights and licenses have been paid or accrued in full, and no further royalties, license fees or other amounts will be payable in the future under the license agreement.

     

In addition to the purchased and licensed patents, the Company has internally developed patents. Internally developed patents include legal and registration costs incurred to obtain the respective patents. The Company currently holds various patents and numerous pending patent applications in the United States, as well as numerous foreign counterparts to these patents outside of the United States.

 

The Company amortizes capitalized patents and trademarks over an average of 10 to 17 year periods. Amortization expense for patents and trademarks was $53 and $65 for the six month periods ended June 30, 2014 and 2013, respectively.

 

7 . Convertible Note and Embedded Conversion Feature Liability

 

On July 2, 2012, the Company entered into the July 2012 Private Placement pursuant to which it issued $12,000 in principal amount of Senior Convertible Notes (“Senior Convertible Notes”) that were due on September 1, 2013 (see note 3). Pursuant to ASC 815-40, due to the anti-dilution provision of the Senior Convertible Notes, the conversion feature of the Senior Convertible Notes is not indexed to the Company’s owned stock and should be bifurcated and recognized as a derivative liability in the consolidated balance sheets and measured at fair value. The Senior Convertible Notes bore interest at 8% per annum and were payable in twelve equal monthly installments of principal and interest beginning on October 1, 2012.

 

 
13

 

 

LIQUIDMETAL TECHNOLOGIES, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
For the Six
Months Ended June 30, 2014 and 2013

(numbers in thousands, except share and per share data)

(unaudited)

   

The embedded conversion feature liability and warrants issued in connection with the Senior Convertible Notes were valued utilizing the Monte Carlo simulation and Black Sholes pricing model at $8,865 and $5,053, respectively, totaling $13,918 as of July 2, 2012. $12,000 of this total was recorded as debt discount and the excess of the face value of the embedded conversion feature liability and warrants of $1,918 was booked to debt discount amortization on July 2, 2012.

 

Pursuant to the terms of the Senior Convertible Notes, the Company opted to pay the first eleven monthly installment payments due prior to June 30, 2013 with shares of the Company’s common stock. On July 17, 2013, the Company and each of the holders of the Senior Convertible Notes due on September 1, 2013, in the original aggregate principal amount of $12,000, agreed to cause all remaining principal and interest under the Senior Convertible Notes to be converted into an aggregate of 18,679,584 shares of the Company’s common stock in full satisfaction of the notes.  As a result of this conversion, the Senior Convertible Notes were paid off in full and are no longer outstanding as of the conversion date. As the final conversion occurred pursuant to terms that were not included in the original terms of the Senior Convertible Notes, the Company recorded a gain on extinguishment of debt in the amount of $91 which consisted of the write-off of unamortized debt discount, unamortized debt issuance costs, embedded conversion feature liabilities, and the difference between the reacquisition price of the shares issued and the contractual conversion price of the Senior Convertible Notes.

 

Upon final settlement, the Company had issued 163,641,547 shares of common stock, at a weighted average conversion price of $0.0774, for the twelve installment payments due under the Senior Convertible Notes, consisting of $12,000 principal and $680 of interest.

 

Interest expense on the Senior Convertible Notes was $0 and $221 for the six month periods ended June 30, 2014 and 2013, respectively.

 

8 . Warrant Liability

 

Pursuant to FASB ASC 815, the Company is required to report the value of certain warrants as a liability at fair value and record the changes in the fair value of the warrant liabilities as a gain or loss in its statement of operations due to the price-based anti-dilution rights of the warrants.

 

During June 2012, the Company issued warrants to purchase a total of 15,000,000 shares of common stock to Visser under the Visser MTA Agreement (see note 3). These warrants had an original exercise price of $0.22 per share, expire on June 1, 2017 and were originally valued at $4,260. These warrants have certain anti-dilution provisions which qualify the warrants to be classified as a liability under FASB ASC 815. As a result of paying down the Senior Convertible Notes with common stock and stock issuances under the 2013 Purchase Agreement, which resulted in an anti-dilution impact, the exercise price of these warrants was reduced to $0.18 as of June 30, 2014 and December 31, 2013. In addition, the number of shares to be issued under the warrants as a result of the anti-dilution provisions increased to 18,706,235 as of June 30, 2014 and 18,562,825 as of December 31, 2013. As of June 30, 2014, these warrants were valued at $3,640 under the Black Sholes valuation model utilizing the following assumptions: (i) expected life of 2.92 years, (ii) volatility of 118%, (iii) risk-free interest rate of 0.88%, and (iv) dividend rate of 0. The change in warrant value for these warrants for the six months ended June 30, 2014 was a loss of $1,081.

 

On July 2, 2012, the Company issued warrants to purchase a total of 18,750,000 shares of common stock related to the July 2012 Private Placement (see note 3). These warrants have an exercise price of $0.384 per share, expire on July 2, 2017 and were originally valued at $5,053. The foregoing warrants have certain anti-dilution and exercise price reset provisions which qualify the warrants to be classified as a liability under FASB ASC 815. As a result of executed draw-downs under the 2013 Purchase Agreement, which resulted in an anti-dilution impact, the exercise price of these warrants was reduced to $0.35 as of June 30, 2014. As of June 30, 2014, these warrants were valued at $3,152 under the Black Sholes valuation model utilizing the following assumptions: (i) expected life of 3.01 years, (ii) volatility of 117%, (iii) risk-free interest rate of 0.88%, and (iv) dividend rate of 0. The change in warrant value for these warrants for the six months ended June 30, 2014 was a loss of $790.

 

The following table summarizes the change in the Company’s warrant liability as of June 30, 2014:

 

   

Visser MTA

   

July 2, 2012

         
   

Agreement

   

Private Placement

   

Total

 
                         

Beginning Balance - December 31, 2013

  $ 2,559     $ 2,362       4,921  

Change in value of warrant liability, loss

    1,081       790       1,871  

Ending Balance - June 30, 2014

  $ 3,640     $ 3,152     $ 6,792  

 

 

The Company had warrants to purchase 67,235,792 and 67,092,382 shares of common stock outstanding as of June 30, 2014 and December 31, 2013, respectively . Of these, warrants to purchase 37,456,235 shares were valued and classified as a liability under FASB ASC 815.

 

 
14

 

 

LIQUIDMETAL TECHNOLOGIES, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
For the Six
Months Ended June 30, 2014 and 2013

(numbers in thousands, except share and per share data)

(unaudited)

   

9 . Other Long-term Liabilities   

 

Other long-term liabilities balance was $856 as of June 30, 2014 and December 31, 2013, and consisted of long -term, aged payables to vendors, individuals, and other third parties that have been outstanding for more than 5 years. The Company is in the process of researching and resolving the balances for settlement and/or write-off in accordance with applicable accounting rules.

 

 

10. Stock Compensation Plan

 

Under the Company’s 2002 Equity Incentive Plan (the “2002 Plan”), which provided for the grant of stock options to officers, employees, consultants and directors of the Company and its subsidiaries, the Company granted options to purchase the Company’s common stock. A total of 10,000,000 shares of our common stock were available for issuance under the 2002 Plan. The 2002 Plan expired by its terms in April 2012, but it will remain in effect only with respect to the equity awards that had been granted prior to its expiration. The Company had outstanding grants of options to purchase 2,135,000 and 2,607,000 shares of the Company’s common stock under the 2002 Plan as of June 30, 2014 and December 31, 2013, respectively.

 

On June 28, 2012, the Company adopted the 2012 Equity Incentive Plan, with the approval of the stockholders, which provided for the grant of stock options to officers, employees, consultants and directors of the Company and its subsidiaries. All options granted under this plan had exercise prices that were equal to the fair market value on the dates of grant. During the six months ended June 30, 2014, the Company granted options to purchase 14,892,914 shares of common stock under this plan. Under this plan, the Company had outstanding grants of options to purchase 26,410,400 and 13,127,500 shares of the Company’s common stock as of June 30, 2014 and December 31, 2013, respectively.

 

 

1 1 . Stockholders Equity ( Deficit)

 

Common stock

 

In June 2012, the Company issued 30,000,000 shares of common stock to Visser in connection with the Visser MTA Agreement (see note 3).

 

Pursuant to the terms of the Company’s Senior Convertible Notes issued in the July 2012 Private Placement, the Company opted to pay the twelve monthly installment payments prior to the September 1, 2013 maturity date with shares of the Company’s common stock. Upon final settlement, the Company had issued 163,641,547 shares of common stock at a weighted average conversion price of $0.0774, for the twelve installment payments due under the notes, consisting of $12,000 principal and $680 of interest (see notes 3 and 7).

 

During the year ended December 31, 2013, the holders of the Company’s Series A Preferred Stock converted all of the outstanding 506,936 shares of Series A Preferred Stock into 16,896,070 shares of the Company’s common stock (see “Preferred stock” below). After giving effect to such conversion, the Company has no shares of preferred stock outstanding.

 

On February 28, 2013, the Company’s stockholders approved an amendment to the Certificate of Incorporation of the Company increasing the number of authorized shares of common stock from 400 million shares to 500 million shares.

 

On October 24, 2013, the Company’s stockholders approved an amendment to the Company’s Certificate of Incorporation increasing the number of authorized shares of common stock from 500 million shares to 700 million shares.

 

In connection with the execution of the 2013 Purchase Agreement, the Company issued to each of the 2013 Investors a pro rata portion of 2,666,667 shares of the Company’s common stock. As of June 30, 2014, the Company had received an aggregate of $16,000 under the 2013 Purchase Agreement through the issuance of 85,355,615 share of its common stock at a weighted average issuance price of $0.19 (see note 3).

 

Preferred stock

 

On May 1, 2009, pursuant to a Securities Purchase and Exchange Agreement, the Company issued 500,000 shares of convertible Series A-1 Preferred Stock with an original issue price of $5.00 per share and 2,625,000 shares of Series A-2 Preferred Stock with an original issue price of $5.00 per share as part of a financing transaction (The Series A-1 Preferred Stock and the Series A-2 Preferred Stock are referred to collectively herein as the “Series A Preferred Stock”). In connection with this Series A Preferred Stock issuance, the Company issued warrants to purchase 42,329,407 shares of the Company’s common stock at an exercise price of $0.50 per share, which was subsequently adjusted to $0.49 per share due to an anti-dilution calculation. These warrants expire on July 15, 2015 .

 

In October 2009, the Company entered into an agreement with various investors to issue 180,000 shares of Series A-1 Preferred Stock with identical terms as the Series A-1 Preferred Stock issued on May 1, 2009. In connection with this issuance, the Company issued warrants to purchase up to 4,500,000 shares of common stock with an exercise price of $0.50 per share, which was subsequently adjusted to $0.49 per share due to an anti-dilution calculation. These warrants also expire on July 15, 2015 .

 

 
15

 

 

LIQUIDMETAL TECHNOLOGIES, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
For the Six
Months Ended June 30, 2014 and 2013

(numbers in thousands, except share and per share data)

(unaudited)

 

The Series A Preferred Stock and any accrued and unpaid dividends thereon was convertible, at the option of the holders of the Series A Preferred Stock, into common stock of the Company at a conversion price of $ 0.10 per share in the case of the Series A-1 Preferred Stock and a conversion price of $ 0.22 per share in the case of the Series A-2 Preferred Stock (in both cases subject to adjustments for any stock dividends, splits, combinations and similar events).

 

During the year ended December 31, 2012, the holders of the Company’s Series A Preferred Stock converted 792,215 shares of Series A Preferred Stock into 25,669,752 shares of the Company’s common stock. As of December 31, 2012, the Company had 506,936 shares of Series A Preferred Stock outstanding, consisting of 105,231 and 401,705 shares of Series A-1 and Series A-2 Preferred Stock , respectively. Accrued dividends on the Series A Preferred Stock as of December 31, 2012 were $222.

 

During the year ended December 31, 2013 , all of the holders of the Company’s Series A Preferred Stock converted all of the outstanding shares of Series A Preferred Stock and accrued dividends into 16,896,070 shares of the Company’s common stock. Therefore, as of December 31, 2013, the Company no longer had any outstanding Series A Preferred Stock and the related $222 accrued dividends were reclassified to additional paid-in capital as of December 31, 2013.

 

Warrants

 

In connection with the Series A Preferred Stock issuances, warrants to purchase 29,779,557 shares of the Company’s common stock were outstanding as of June 30, 2014 and December 31, 2013. Due to extension of the expiration date of these warrants, they no longer contain anti-dilution provisions and are reflected as equity as they do not meet the criteria under FASB ASC 815 for liability treatment. Warrants classified as equity were recorded at $18,179 as of June 30, 2014 and December 31, 2013. Such warrants have exercise prices ranging between $0.48 and $0.49 and expire on July 15, 2015.

 

Non-Controlling Interest

 

The Company’s Liquidmetal Golf subsidiary has the exclusive right and license to utilize the Company’s Liquidmetal alloy technology for purposes of golf equipment applications. Liquidmetal Technologies owns 79% of the outstanding common stock of Liquidmetal Golf. As of June 30, 2014, non-controlling interest was a deficit of $50. The December 31, 2013 non-controlling interest was a deficit of $42.

 

 

1 2 . Loss Per Common Share

 

Basic earnings per share (“EPS”) is computed by dividing earnings (loss) attributable to common stockholders by the weighted average number of common shares outstanding for the applicable periods. Diluted EPS reflects the potential dilution of securities that could share in the earnings.

 

Options to purchase 28,545,400 shares of common stock , at prices ranging from $0.08 to $2.33 per share , were outstanding at June 30, 2014, but were not included in the computation of diluted EPS for the same period as the inclusion would have been antidilutive, given the Company’s net loss. Warrants to purchase 67,235,792 shares of common stock , with prices ranging from $ 0.18 to $0.49 per share , outstanding at June 30, 2014 were not included in the computation of diluted EPS for the same period as the inclusion would have been antidilutive, given the Company’s net loss.

 

Options to purchase 15,997,500 shares of common stock, at prices ranging from $0.08 to $4.57 per share, were outstanding at June 30, 2013, but were not included in the computation of diluted EPS for the same period as the inclusion would have been antidilutive, given the Company’s net loss. Warrants to purchase 66,510,012 shares of common stock, with prices ranging from $0.20 to $0.49 per share, outstanding at June 30, 2013 were not included in the computation of diluted EPS for the same period as the inclusion would have been antidilutive, given the Company’s net loss.

 

 

1 3 . Commitments and Contingencies

 

Operating Lease Commitments

 

The Company leases its office and warehouse facility under a lease agreement that expires on April 30, 2016. Rent payments are subject to escalations through the end of the lease term. Rent expense was $50 and $100 for the three and six months ended June 30, 2014, respectively. Rent expense was $50 and $90 for the three and six months ended June 30, 2013, respectively .

 

 
16

 

 

LIQUIDMETAL TECHNOLOGIES, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
For the Six
Months Ended June 30, 2014 and 2013

(numbers in thousands, except share and per share data)

(unaudited)

 

1 4 . Related Party Transactions

 

The Company entered into a license agreement (the “IMG License Agreement”) with Innovative Materials Group, LLC (“IMG”), a California limited liability company which is majority owned by Mr. Kang, a former Chief Executive Officer and former Chairman of the Company , to license certain patents and technical information for the limited purpose of manufacturing certain licensed products with the Company’s first generation die cast machines. The IMG License Agreement granted a non-exclusive license to certain product categories, as well as an exclusive license to specific types of consumer eyewear products and obligated IMG to pay the Company a running royalty based on its sales of licensed products through August 5, 2021. The Company recognized $4 and $0 in royalty revenues from IMG during the six months ended June 30, 2014 and June 30, 2013, respectively .

 

On February 1, 2012 , Mr. Tony Chung , the Company’s Chief Financial Officer , converted his 10,000 shares of Series A-1 Preferred Stock into a total of 565,344 shares of the Company’s common stock, including dividends received in the form of common stock.

 

In February 2013, Mr. Abdi Mahamedi, the Company’s Chairman, converted his 58,600 shares of Series A-1 Preferred Stock and 260,710 shares of Series A-2 Preferred Stock into a total of 10,387,883 shares of the Company’s common stock, including dividends received in the form of common stock.

 

Mr. Thomas Steipp, the Company’s Chief Executive Officer, sold an aggregate of 400,000 shares of the common stock of the Company on August 5, 2013 pursuant to a trading plan that Mr. Steipp previously adopted under SEC Rule 10b5-1 under the Securities Exchange Act of 1934, as amended. Mr. Steipp adopted the trading plan on March 22, 2013 for the purpose of providing him with funds to satisfy certain tax liabilities as a result of the vesting on August 3, 2013 of 1,200,000 shares of Company restricted common stock held by Mr. Steipp. The restricted shares were granted to Mr. Steipp in 2010 under a previously disclosed Restricted Stock Award Agreement, dated August 3, 2010, between Mr. Steipp and the Company. On March 27, 2014, Mr Steipp adopted a new 10b5-1 trading plan that will allow for future sales of 500,000 shares of common stock of the Company on both August 4, 2014 and August 4, 2015.

 

In September 2013, the Company entered into Change of Control Agreements with Ricardo A. Salas, the Company’s Executive Vice President, Tony Chung, the Company’s Chief Financial Officer, and certain other executive officers who are not named executive officers of the Company for SEC reporting purposes. The Change of Control Agreements provide that if the executive officer’s employment with the Company is terminated without cause during the one-year period after a change of control of the Company, then the terminated officer will receive lump sum severance compensation in an amount equal to twelve months of his then-current base salary. Under the agreements, each of the executive officers will also be entitled to the above-described severance compensation in the event he terminates his own employment within one year after a change of control because of a salary decrease or assignment to a lower-level position. In addition, upon termination, all unvested stock options related to these officers will automatically and immediately vest and shall thereafter be exercisable in accordance with the terms and provisions of the applicable award agreements.

 

The Company has an exclusive license agreement with LLPG, Inc. (“LLPG”), a corporation owned principally by Jack Chitayat, a former director of the Company. Under the terms of the agreement, LLPG has the right to commercialize Liquidmetal alloys, particularly precious-metal based compositions, in jewelry and high-end luxury product markets.  The Company, in turn, will receive royalty payments over the life of the contract on all Liquidmetal products produced and sold by LLPG.    The exclusive license agreement with LLPG expires on December 31, 2021. There were no revenues recognized from product sales and licensing fees from LLPG during the six months ended June 30, 2014 or 2013.

 

On February 27, 2013, Mr. Chitayat converted his 28,928 shares of Series A-1 Preferred Stock and 109,528 shares of Series A-2 Preferred Stock into a total of 4,626,840 shares of the Company’s common stock, including dividends received in the form of common stock.

 

On June 1, 2012, the Company entered into the Visser MTA Agreement relating to a strategic transaction for manufacturing services and financing. In November 2013, the Company and Visser entered into arbitration proceedings to resolve disputes associated with this agreement. As part of the May 2014 settlement of these proceedings, the Company has granted to Visser a fully paid-up, royalty-free, irrevocable, perpetual, worldwide, non-transferable, nonexclusive sublicense to all of the Company’s intellectual property developed on or prior to May 20, 2014, for all fields of use other than certain excluded fields as set forth therein. Visser does not have any rights, now or in the future, to intellectual property of the Company developed after the Effective Date of the agreement. The license to the Company’s intellectual property does not include the right to use the “Liquidmetal” trademark or any of the Company’s other trademarks, except in certain defined situations, as set forth in the amended and restated agreement entered into in connection with the settlement (see note 3).

 

 

 
17

 

 

Item 2 – Management’s Discussion and Analysis of Financial Condition and Results of Operations

 

This management’s discussion and analysis should be read in conjunction with the consolidated financial statements and notes included elsewhere in this Quarterly R eport on Form 10-Q . All amounts described in this section are in thousands, except share and per share dat a .

 

This management’s discussion and analysis, as well as other sections of this Quarterly R eport on Form 10-Q, may contain “forward-looking statements” that involve risks and uncertainties, including statements regarding our plans, future events, objectives, expectations, forecasts, or assumptions. Any statement that is not a statement of historical fact is a forward-looking statement, and in some cases, words such as “believe,” “estimate,” “project,” “expect,” “intend,” “may,” “anticipate,” “plan,” “seek,” and similar expressions identify forward-looking statements. These statements involve risks and uncertainties that could cause actual outcomes and results to differ materially from the anticipated outcomes or results, and undue reliance should not be placed on these statements. These risks and uncertainties include, but are not limited to, the matters discussed under the heading “Item 1A. Risk Factors” in our Annual Report on Form 10-K for the fiscal year ended December 31, 201 3 and other risks and uncertainties discussed in other filings made with the Securities and Exchange Commission (including risks described in subsequent reports on Form 10-Q, and Form 8-K and other filings). Liquidmetal Technologies disclaims any intention or obligation to update or revise any forward-looking statements, whether as a result of new information, future events, or otherwise.

 

 

Overview

 

We are a materials technology company that develops and commercializes products made from amorphous alloys.  Our Liquidmetal® family of alloys consists of a variety of proprietary bulk alloys and composites that utilize the advantages offered by amorphous alloy technology. We design, develop and sell products and components from bulk amorphous alloys to customers in various industries. We also partner with third-party manufacturers and licensees to develop and commercialize Liquidmetal alloy products.

 

Amorphous alloys are, in general, unique materials that are distinguished by their ability to retain a random atomic structure when they solidify, in contrast to the crystalline atomic structures that form in other metals and alloys when they solidify. Liquidmetal alloys are proprietary amorphous alloys that possess a combination of performance, processing, and potential cost advantages that we believe will make them preferable to other materials in a variety of applications. The amorphous atomic structure of our alloys enables them to overcome certain performance limitations caused by inherent weaknesses in crystalline atomic structures, thus facilitating performance and processing characteristics superior in many ways to those of their crystalline counterparts. For example, in laboratory testing, our zirconium-titanium Liquidmetal alloys are approximately 250% stronger than commonly used titanium alloys such as Ti-6Al-4V, but they also have some of the beneficial processing characteristics more commonly associated with plastics. We believe these advantages could result in Liquidmetal alloys supplanting high-performance alloys, such as titanium and stainless steel, and other incumbent materials in a variety of applications. Moreover, we believe these advantages could enable the introduction of entirely new products and applications that are not possible or commercially viable with other materials.

 

Our revenues are derived from (i) selling our bulk Liquidmetal alloy products, which include non-consumer electronic devices, aerospace parts, medical products, automotive components, oil and gas exploration, and sports and leisure goods, (ii) selling tooling and prototype parts such as demonstration parts and test samples for customers with products in development, (iii) product licensing and royalty revenue, and (iv) research and development revenue.  

 

Our cost of sales consists primarily of the costs of outsourcing our manufacturing to third parties. Selling, general, and administrative expenses currently consist primarily of salaries and related benefits, travel, consulting and professional fees, depreciation and amortization, insurance, office and administrative expenses, and other expenses related to our operations.

 

Research and development expenses represent salaries, related benefits expense, depreciation of research equipment, consulting and contract services, expenses incurred for the design and testing of new processing methods, expenses for the development of sample and prototype products, and other expenses related to the research and development of Liquidmetal bulk alloys. Costs associated with research and development activities are expensed as incurred. We plan to enhance our competitive position by improving our existing technologies and developing advances in amorphous alloy technologies. We believe that our research and development efforts will focus on the discovery of new alloy compositions, the development of improved processing technology, and the identification of new applications for our alloys.

 

Licensing Transactions

 

Transaction with Visser Precision Cast, LLC

 

On June 1, 2012, we entered into a Master Transaction Agreement (the “Visser MTA Agreement”) with Visser Precision Cast, LLC (“Visser”) relating to a strategic transaction for manufacturing services and financing.

 

Under the manufacturing and service component of the Visser MTA Agreement, we agreed to engage Visser as a perpetual, exclusive manufacturer of non-consumer electronic products and to not, directly or indirectly, conduct manufacturing operations, subcontract for the manufacture of products or components or grant a license to any other party to conduct manufacturing operations, except for certain limited exceptions. Under the financing component of the Visser MTA Agreement, we issued and sold to Visser in a private placement transaction (i) 30,000,000 shares of common stock at a purchase price of $0.10 per share resulting in proceeds of $3,000, (ii) warrants to purchase 15,000,000 shares of common stock at an original exercise price of $0.22 per share which were to expire on June 1, 2017 and (iii) a secured convertible promissory note in the aggregate principal amount of up to $2,000. No borrowings were made by us under the promissory note, and the deadline for making borrowings under the facility expired on November 15, 2012.

 

 
18

 

 

In November 2013, we entered into arbitration proceedings with Visser to resolve disputes associated with the Visser MTA Agreement.

 

On May 20, 2014, we and Visser agreed to terminate the existing arbitration proceedings, release each other from all claims we may have had against each other and substantially change the business relationship that had been reflected in the original Visser MTA Agreement. As part of the settlement, the parties have amended and restated the sublicense and financing components of the Visser MTA Agreement. Additionally, the manufacturing services component and remaining considerations of the Visser MTA Agreement were terminated.

  

Under the amended and restated sublicense agreement, we have granted to Visser a fully paid-up, royalty-free, irrevocable, perpetual, worldwide, non-transferable, nonexclusive sublicense to all of our intellectual property developed on or prior to May 20, 2014 (the “Effective Date”), for all fields of use other than certain excluded fields as set forth therein. Visser does not have any rights, now or in the future, to our intellectual property developed after the Effective Date of the agreement. The license to our intellectual property developed on or prior to the Effective Date does not include the right to use the “Liquidmetal” trademark or any of our other trademarks, except in certain defined situations, as set forth in the amended and restated agreement.

 

With the foregoing revised arrangements, we are no longer required to use Visser as its exclusive manufacturer and is free to license other manufacturers on a non-exclusive basis in any industry or geographic market as to which we have not previously granted an exclusive license to a third party. Any such manufacturers licensed by us in the future will be able both to manufacture parts for us and our customers , and manufacture and sell products for their own account for such industries or markets as we may agree, subject to whatever royalty arrangements we may negotiate. We have not yet licensed any manufacturers other than Visser. Visser will also have the right to manufacture and sell products under the amended and restated sublicense agreement.

 

The amended and restated financing aspect amends and restates two warrants we issued to VPC in June 2012 to purchase 15,000,000 shares of our common stock at an exercise price of $0.22 per share. Those warrants contained anti-dilution mechanisms under which the number of shares issuable upon exercise of those warrants would be increased, and the exercise price for such shares would be reduced if we issued shares of our common stock at prices less than the warrants’ exercise price. The amended and restated warrant agreement includes the effect of such anti-dilution adjustments and is exercisable for 18,611,079 shares of common stock (increased to 18,706,235 shares under the anti-dilution provisions of the warrants, see note 8) at an exercise price of $0.18 per share. The amended and restated warrant agreement continues to contain comparable anti-dilution adjustment mechanisms. The amended and restated warrant agreement also removes certain lock-up provisions that were included in the original warrants.

 

Apple License Transaction

 

On August 5, 2010, we entered into a license transaction with Apple Inc. (“Apple”) pursuant to which (i) we contributed substantially all of our intellectual property assets to a newly organized special-purpose, wholly-owned subsidiary, called Crucible Intellectual Property, LLC (“CIP”), (ii) CIP granted to Apple a perpetual, worldwide, fully-paid, exclusive license to commercialize such intellectual property in the field of consumer electronic products, as defined in the license agreement, in exchange for a license fee, and (iii) CIP granted back to us a perpetual, worldwide, fully-paid, exclusive license to commercialize such intellectual property in all other fields of use.

 

Under the agreements relating to the license transaction with Apple, we were obligated to contribute to CIP all intellectual property that we developed through February 2012 (“Capture Period”). Subsequently, we have amended the Capture Period to extend through February 2015. We are also obligated to maintain certain limited liability company formalities with respect to CIP at all times after the closing of the license transaction.

 

Other License Transactions

 

On January 31, 2012, we entered into a Supply and License Agreement for a five year term with Engel Austria Gmbh (“Engel”) whereby Engel was granted a non-exclusive license to manufacture and sell injection molding machines to our licensees. Since that time, we and Engel have agreed on an injection molding machine configuration that can be commercially supplied and supported by Engel. On December 6, 2013, the companies entered into an Exclusive License Agreement for a 10 year term whereby Engel was granted an exclusive license to manufacture and sell injection molding machines to our licensees in exchange for certain royalties to be paid by Engel to us based on a percentage of the net sales price of such injection molding machines.

 

Our Liquidmetal Golf subsidiary has the exclusive right and license to utilize our Liquidmetal alloy technology for purposes of golf equipment applications. This right and license is set forth in an intercompany license agreement between Liquidmetal Technologies and Liquidmetal Golf. This license agreement provides that Liquidmetal Golf has a perpetual and exclusive license to use Liquidmetal alloy technology for the purpose of manufacturing, marketing, and selling golf club components and other products used in the sport of golf. We own 79% of the outstanding common stock of Liquidmetal Golf.

 

 
19

 

 

In June 2003, we entered into an exclusive license agreement with LLPG, Inc. (“LLPG”). Under the terms of the agreement, LLPG has the right to commercialize Liquidmetal alloys, particularly precious-metal based compositions, in jewelry and high-end luxury product markets. We, in turn, will receive royalty payments over the life of the contract on all Liquidmetal products produced and sold by LLPG. The exclusive license agreement with LLPG expires on December 31, 2021.

 

In March 2009, we entered into a license agreement with Swatch Group, Ltd. (“Swatch”) under which Swatch was granted a perpetual non-exclusive license to our technology to produce and market watches and certain other luxury products. In March 2011, this license agreement was amended to grant Swatch exclusive rights as to watches, and our license agreement with LLPG was simultaneously amended to exclude watches from LLPG’s rights. We will receive royalty payments over the life of the contract on all Liquidmetal products produced and sold by Swatch. The license agreement with Swatch will expire on the expiration date of the last licensed patent.

 

Critical Accounting Policies and Estimates

 

The preparation of consolidated financial statements in conformity with accounting principles generally accepted in the United States requires us to make estimates and assumptions that affect reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period. These estimates and assumptions are based on historical experience and various other factors that are believed to be reasonable under the circumstances. Actual results could differ materially from these estimates under different assumptions or conditions.

 

We believe that the following accounting policies are the most critical to our consolidated financial statements since these policies require significant judgment or involve complex estimates that are important to the portrayal of our financial condition and operating results:

 

Revenue recognition

Impairment of long-lived assets and definite-lived intangibles

Deferred tax assets

Valuation of liability classified warrants

Debt discount

Share based compensation

 

Our Annual Report on Form 10-K for the year ended December 31, 2013 (the “2013 Annual Report”) contains further discussions on our critical accounting policies and estimates.

 

 
20

 

 

Results of Operations  

 

Comparison of the three and six months ended June 30, 2014 and 2013

 

   

For the three months

ended June 30,

   

For the six months

ended June 30,

 
   

2014

           

2013

           

2014

           

2013

         
   

in 000's

   

% of Products Revenue

   

in 000's

   

% of Products Revenue

   

in 000's

   

% of Products Revenue

   

in 000's

   

% of Products Revenue

 
                                                                 

Revenue:

                                                               

Products

  $ 121             $ 150             $ 277             $ 265          

Licensing and royalties

    32               -               36               7          

Total revenue

    153               150               313               272          
                                                                 

Cost of sales

    75       62%       111       74%       215       78%       193       73%  
                                                                 

Gross margin

    78       64%       39       26%       98       35%       79       30%  
                                                                 

Selling, marketing general and administrative

    2,021       1664%       1,209       806%       3,872       1395%       2,523       952%  

Research and development

    392       322%       224       149%       726       261%       460       174%  
                                                                 

Operating loss

    (2,335 )             (1,394 )             (4,500 )             (2,904 )        
                                                                 

Change in value of warrants, gain (loss)

    (145 )             286               (1,871 )             796          

Change in value of embedded conversion feature liabilities, gain

    -               1,378               -               3,056          

Debt discount amortization expense

    (31 )             (2,108 )             (52 )             (6,143 )        

Interest expense

    -               (80 )             -               (221 )        

Interest income

    2               1               2               4          

Net loss

    (2,509 )             (1,917 )             (6,421 )             (5,412 )        

 

 

 

In discussing our results of our operations, we have categorized the specific items of our statements of operations into various categories to facilitate the understanding of our core business operations. Explanations of each category as well as analyses of specific items contained in that category are discussed below:

 

Operating revenue and expenses

 

The “Operating revenue and expenses” category of statements of operations items represent those items that pertain to our core operations in the bulk alloy manufacturing and licensing business as follows:

 

Revenue . Total revenue increased to $153 for the three months ended June 30, 2014 from $150 for the three months ended June 30, 2013. Total revenue also increased for the six months ended June 30, 2014 to $313 from $272 for the same period in 2013. The increase for the periods was primarily attributable to an increase in royalty revenues, primarily from Swatch.

 

Cost of sales . Cost of sales was $75, or 62% of products revenue, for the three months ended June 30, 2014, a decrease from $111, or 74% of products revenue, for the three months ended June 30, 2013. Cost of sales was $215, or 78% of products revenue, for the six months ended June 30, 2014, an increase from $193, or 73% of products revenue, for the six months ended June 30, 2013. The cost to manufacture parts from our bulk alloys manufacturing business is variable and differs based on the unique design of each product. In addition, much of our current product mix consists of prototype parts and other revenue which have higher internal variable cost percentages, relative to products revenue, than would otherwise be incurred by contract manufacturers. Therefore, our cost of sales as a percentage of products revenue may not be representative of our future cost percentages. When and if we begin increasing our products revenues with shipments of routine, commercial parts through a third party contract manufacturer, we expect our cost of sales percentages to stabilize and be more predictable.

 

Gross margin . Our gross margin increased to $78 from $39 for the three month periods ended June 30, 2014 and 2013, respectively. Our gross margin, as a percentage of products revenue, increased to 64% from 26% for the three month periods ended June 30, 2014 and 2013, respectively. Our gross margin increased to $98 from $79 for the six month periods ended June 30, 2014 and 2013, respectively. Our gross margin, as a percentage of products revenue, increased to 35% from 30% for the six month periods ended June 30, 2014 and 2013, respectively. As discussed above under “Cost of sales”, much of our current product mix consists of prototype parts and other revenue which have higher internal variable cost percentages, relative to revenue, than would otherwise be incurred by contract manufacturers. As such, our gross margin percentages may fluctuate based on volume and quoted production prices per unit and may not be representative of our future business. When and if we begin increasing our revenues with shipments of routine, commercial parts through a third party contract manufacturer, we expect our gross margin percentages to stabilize and be more predictable.

 

 
21

 

 

Selling, Marketing, General, and Administrative . Selling, marketing, general and administrative expenses were $2,021 and $3,872 for the three and six months ended June 30, 2014, respectively, compared to $1,209 and $2,523 for the three and six months ended June 30, 2013, respectively. The increase in expense for both the three and six month periods is due to additional legal costs incurred in conjunction with the arbitration proceeding and settlement discussions with Visser, increases in stock based compensation related to 2014 stock option grants, and additional payroll expenses associated with the hiring of our Vice President of Worldwide Sales and Support.

 

Research and Development . Research and development expenses increased to $392 and $726 for the three and six months ended June 30, 2014, respectively, from $224 and $460 for the three and six months ended June 30, 2013, respectively. The increase from the prior year was mainly due to additional company research projects during 2014. We continue to perform research and development of new Liquidmetal alloys and related processing capabilities, develop new manufacturing techniques, and contracts with consultants to advance the development of Liquidmetal alloys and related production processes.  

 

Operating loss . Operating loss was $2,335 and $4,500 for the three and six month periods ended June 30, 2014, respectively. This compares to $1,394 and $2,904 for the three and six month periods ended June 30, 2013, respectively. The change in our loss is primarily attributable to the increase in operating expenses, off-set by higher revenues, as discussed above.

 

We continue to invest in our technology infrastructure to expedite the adoption of our technology, but we have experienced long sales lead times for customer adoption of our technology. Until that time where we can either (i) increase our revenues with shipments of routine, commercial parts through a third party contract manufacturer or (ii) obtain significant licensing revenues, we expect to have operating losses for the foreseeable future.

 

N on-operational e xpense s

 

Our statement of operations contains various, significant items that are non-operational in nature. These categories of expenses may have significant gains and losses based on the volatility of our stock price as follows:

 

Change in Value of Warrants . The change in value of warrants was a non-cash loss of $145 and $1,871 for the three and six months ended June 30, 2014, respectively. The change in value of warrants was a non-cash gain of $286 and $796 for the three and six months ended June 30, 2013, respectively. These gains and losses result from periodic valuation adjustments related to fluctuations in our stock price for warrants issued in connection with the Visser MTA Agreement and our Senior Convertible Notes issued in our private placement that closed in July 2012, as further described in note 3 to the accompanying financial statements (the “July 2012 Private Placement”). Changes in the value of our warrants are non-cash and do not affect the core operations of our business or liquidity.

 

Change in Value of Embedded Conversion Feature Liability. Change in value of embedded conversion feature liability was a non-cash gain of $1,378 and $3,056 for the three and six months ended June 30, 2013, respectively. As part of the final conversion on July 17, 2013 of the senior convertible notes issued in the July 2012 Private Placement, the associated embedded conversion liability was reduced to zero due to exercise of the conversion option and was included in the calculation of the resulting gain on extinguishment of the senior convertible notes (see note 7 in the accompanying footnotes to the financial statements). As a result, there was no activity for this transaction during the three and six months ended June 30, 2014.

 

Debt Discount Amortization . Debt discount amortization expense was $31 and $52 for the three and six month periods ended June 30, 2014, respectively. This compares to $2,108 and $6,143 for the three and six month periods ended June 30, 2013, respectively. For the three and six months ended June 30, 2014, debt discount amortization primarily related to the periodic amortization of issuance costs associated with the 2013 Purchase Agreement. Expense recorded for the three and six months ended June, 2013 relates to the amortization of the original issue discount and deferred financing costs associated with the July 2012 Private Placement, as well as imputed interest related to discounted stock issuances in settlement of installment payments of senior secured notes.

 

Interest Expense . Interest expense for the three and six months ended June 30, 2013 was $80 and $221, respectively, and consisted of the 8% interest related to the senior convertible notes issued as part of the July 2012 Private Placement. Following the full satisfaction of obligations under the senior convertible notes during July 2013, no such expense was recorded during the three and six months ended June 30, 2014.

 

Interest Income. Interest income relates to interest earned from our cash deposit for the respective periods. Such amounts were $2 and $2 for the three and six month periods ended June 30, 2014, respectively. This compares to $1 and $4 for the three and six month periods ended June 30, 2013.

 

 
22

 

 

Liquidity and Capital Resources 

 

For the six months ended June 30, 2014, our cash used in operations was $3,760, cash used in investing activities was $554, and cash provided by financing activities was $16,146. As of June 30, 2014, our cash balance was $13,894.

 

On November 8, 2013, we entered into the 2013 Purchase Agreement that will allow us to raise up to $20,000 through periodic issuances of common stock over a three year period. As of June 30, 2014, we had received an aggregate of $16,000 under the 2013 Purchase Agreement through the issuance of 85,355,615 shares of our common stock. (See note 3 in the accompanying footnotes to the financial statements.)

 

We anticipate that our current capital resources, when considering expected losses from operations, will be sufficient to fund our operations through the end of 2015. We have a relatively limited history of producing bulk amorphous alloy components and products on a mass-production scale. Furthermore, the ability of future contract manufacturers to produce our products in desired quantities and at commercially reasonable prices is uncertain and is dependent on a variety of factors that are outside of our control, including the nature and design of the component, the customer’s specifications, and required delivery timelines. These factors will likely require that we continue to make draw-downs under the 2013 Purchase Agreement, raise additional funds by other means, or pursue other strategic initiatives to support our operations beyond the end of 2015. There is no assurance that we will be able to continue to make draw-downs under the 2013 Purchase Agreement or to raise additional funds by other means on acceptable terms, if at all. If we were to continue to make draw-downs under the 2013 Stock Purchase Agreement or to raise additional funds through other means by issuing securities, existing stockholders may be diluted. If funding is insufficient at any time in the future, we may be required to alter or reduce the scope of our operations or to cease operations entirely. Uncertainty as to the outcome of these factors raises substantial doubt about our ability to continue as a going concern.

 

 

Off Balance Sheet Arrangements 

 

As of June 30, 2014, we did not have any off-balance sheet arrangements.

 

Item 3 – Quantitative and Qualitative Disclosures about Market Risk

 

Not applicable.

 

Item 4 – Controls and Procedures

 

Evaluation of Disclosure Controls and Procedures

 

Under the supervision and with the participation of our management, including our Chief Executive Officer (Principal Executive Officer) and Chief Financial Officer (Principal Financial Officer), we carried out an evaluation of the effectiveness of the design and operation of our disclosure controls and procedures (as defined in Rule 13a-15(e) under the Securities Exchange Act of 1934, as amended (the “Exchange Act”)) as of June 30, 2014. Based on their evaluation, our Chief Executive Officer and Chief Financial Officer have concluded that our disclosure controls and procedures were effective as of June 30, 2014.

 

Changes in Internal Control over Financial Reporting .

 

There were no changes in our internal control over financial reporting (as that term is defined in Rules 13a-15(f) or 15d-15(f) under the Exchange Act) during the quarter ended June 30, 2014 that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.  

 

 
23

 

 

PART II

OTHER INFORMATION

 

Item 1 – Legal Proceedings

 

There have been no significant developments with respect to legal proceedings specifically affecting Liquidmetal Technologies, Inc. since the filing of the 2013 Annual Report, except as follows:

 

In November 2013, we entered into arbitration proceedings with Visser with the Judicial Arbiter Group in Denver, Colorado. Both parties have filed claims alleging breaches of various obligations under the Visser MTA Agreement entered into on June 1, 2012.

 

On May 20, 2014, we and Visser agreed to terminate the existing arbitration proceedings, release each other from all claims we may have had against each other and substantially change the business relationship that had been reflected in the original Visser MTA Agreement. As part of the settlement, the parties have amended and restated the sublicense and financing components of the Visser MTA Agreement. Additionally, the manufacturing services component and remaining considerations of the Visser MTA Agreement were terminated. For additional information regarding the amended and restated agreement/ arrangements please see “Management’s Discussion and Analysis of Financial Condition and Results of Operations.”

 

Item 1A – Risk Factors

 

For a detailed discussion of the risk factors that should be understood by any investor contemplating an investment in our stock, please refer to Part I, Item 1A “Risk Factors” in the 2013 Annual Report.

 

Item 2 – Unregistered Sales of Equity Securities and Use of Proceeds

 

During the period covered by this Quarterly Report on Form 10-Q, we did not issue or sell any unregistered equity securities.

 

 

Item 3 – Defaults Upon Senior Securities

 

None .

 

Item 4 – Mine Safety Disclosures

 

None .

 

Item 5 – Other Information

 

None .

 

 
24

 

 

Item 6 – Exhibits

 

The following documents are filed as exhibits to this Report:

 

 

Exhibit

Number

  Description of Document                                                                                                                                                            
     
     

10.1

 

Amendment Number Two to Master Transaction Agreement and Other Transaction Documents, dated May 19, 2014, between Apple Inc., Liquidmetal Technologies, Inc., Liquidmetal Coatings, LLC and Crucible Intellectual Property, LLC.

     

10.2

 

Settlement Agreement and Mutual General Release, dated May 20, 2014, between Liquidmetal Technologies, Inc. and Visser Precision Cast, LLC ( incorporated by reference from Exhibit 10.1 to the Form 8-K filed on May 20, 2014).

     

10.3

 

Amended and Restated VPC Sublicense Agreement, dated May 20, 2014, between Liquidmetal Technologies, Inc. and Visser Precision Cast, LLC ( incorporated by reference from Exhibit 10.2 to the Form 8-K filed on May 20, 2014).

     

10.4

 

Amended and Restated Registration Rights Agreement, dated May 20, 2014, between Liquidmetal Technologies, Inc. and Visser Precision Cast, LLC ( incorporated by reference from Exhibit 10.3 to the Form 8-K filed on May 20, 2014).

     

10.5

 

Amended and Restated Mutual Nondisclosure Agreement, dated May 20, 2014, between Liquidmetal Technologies, Inc. and Visser Precision Cast, LLC ( incorporated by reference from Exhibit 10.4 to the Form 8-K filed on May 20, 2014).

     

10.6

 

Amended and Restated Common Stock Purchase Warrant, dated May 20, 2014, issued to Visser Precision Cast, LLC ( incorporated by reference from Exhibit 10.5 to the Form 8-K filed on May 20, 2014).

     

31.1

 

Certification of Principal Executive Officer, Thomas Steipp, as required by Section 302 of the Sarbanes-Oxley Act of 2002

     

31.2

 

Certification of Principal Financial Officer, Tony Chung, as required by Section 302 of the Sarbanes-Oxley Act of 2002

     

32.1

 

Certification of Chief Executive Officer, Thomas Steipp, pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002

     

32.2

 

Certification of Chief Financial Officer, Tony Chung, pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002

     

101.1

 

The following financial statements from Liquidmetal Technologies, Inc.’s Quarterly Report on Form 10-Q for the quarter ended June 30, 2014 (unaudited), formatted in XBRL: (i) Consolidated Balance Sheets as of June 30, 2014 and December 31, 2013, (ii) Consolidated Statements of Operations and Comprehensive Loss for the three and six months ended June 30, 2014 and 2013, (iii) Consolidated Statement of Stockholders’ Equity (Deficit) for the six months ended June 30, 2014, (iv) Consolidated Statements of Cash Flows for the six months ended June 30, 2014 and 2013, and (v) Notes to Consolidated Financial Statements.

 

 
25

 

 

SIGNATURES

 

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.

 

 

 

LIQUIDMETAL TECHNOLOGIES, INC.

 

 

(Registrant)

 

 

 

 

Date: August 12, 2014

/s/ Thomas Steipp

 

 

Thomas Steipp

 

 

President and Chief Executive Officer

 

 

(Principal Executive Officer)

 

 

 

 

 

 

 

Date: August 12, 2014

/s/ Tony Chung

 

 

Tony Chung

 

 

Chief Financial Officer

 

 

(Principal Financial and Accounting Officer)

 

 

 

 

 

 

 

 

 

 

 

26

Exhibit 10.1

 

AMENDMENT NUMBER TWO TO
MASTER TRANSACTION AGREEMENT AND OTHER TRANSACTION DOCUMENTS

 

This Amendment Number Two to Master Transaction Agreement and Other Transaction Documents (this “ Amendment ”) is entered into as of May 19, 2014 by and between Apple Inc., a California corporation (“ Apple ”), Liquidmetal Technologies, Inc., a Delaware corporation (“ LMT ”), Liquidmetal Coatings, LLC, a Delaware limited liability company (“ LMC ”), and Crucible Intellectual Property, LLC, a Delaware limited liability company (“ LMT-SPE ”), with reference to the following facts:

 

A.     Apple, LMT, and LMT-SPE have previously entered into that certain Master Transaction Agreement, made effective as of August 5, 2010 (as amended and modified, from time to time, the “ MTA ”).

 

B.     Pursuant to the MTA, LMT and LMT-SPE entered that certain Contribution Agreement dated as of August 5, 2010 (as amended and modified, from time to time, the “ Contribution Agreement ”) pursuant to which LMT agreed to contribute to LMT-SPE the LMT Technology at the Closing Date and for eighteen (18) months thereafter.

 

C.     Pursuant to the MTA, Apple and LMT entered into that certain Apple – LMT Technology Development Agreement dated as of August 5, 2010 pursuant to which LMT agreed to provide certain technical assistance and consultation and technology development services (as amended and modified, from time to time, the “ Development Agreement ”).

 

D.     LMT and Apple have previously entered into that certain Amendment Number One to Master Transaction Agreement and Other Transaction Documents, dated June 15, 2012, pursuant to which, among other things, the Capture Period (as defined in the MTA), was extended through February 5, 2014 (“ Amendment Number One ”).

 

E.     Apple, LMT, and LMT-SPE hereby desire to further extend the Capture Period and to extend the term of the Development Agreement upon the terms and conditions set forth in this Amendment.

 

NOW, THEREFORE, for good and valuable consideration, the receipt and sufficiency of which are hereby acknowledged, the parties hereto amend the agreements described in the recitals above, as follows:

 

1.      DEFINITIONS . All initially capitalized terms used in this Amendment shall have the meanings given to them in the MTA unless specifically defined herein. For the avoidance of doubt, the term “LMT Technology” shall have the meaning set forth in Amendment Number One (after giving effect to the amendment of Section 1(a)(v) of the MTA as set forth in Section 2(a) of this Amendment).

 

2.      AMENDMENTS .

 

(a)     Section 1(a)(v) of the MTA (as amended by Amendment Number One) is hereby amended by replacing “February 5, 2014” with “February 5, 2015”.

 

(b)     Recital A of the Contribution Agreement (as amended by Amendment Number One) is hereby amended by replacing “February 5, 2014” with “February 5, 2015”.

 

(c)     Section 1 of the Contribution Agreement (as amended by Amendment Number One) is hereby amended by replacing “February 5, 2014” with “February 5, 2015”.

 

(d)     Section 8 of the Development Agreement is hereby amended by replacing the first two (2) sentences of Section 8 with the following: “This Agreement shall have a term of four (4) years from the Closing Date, after which this Agreement shall automatically renew for successive one-year terms unless Apple provides Company with a notice of non-renewal at least thirty (30) days prior to the end of the initial term or then-current renewal term.”

   

 

 

 

3.      SECTION 16 OF MTA . Section 16 of the MTA (as amended by Amendment Number One) is by this reference thereto incorporated into this Amendment as if restated in its entirety herein, except that each reference therein to the MTA shall be deemed a reference to this Amendment. This Amendment constitutes the entire agreement between the parties relating to the subject matter hereof and supersedes and cancels all other prior agreements and understandings of the parties in connection with subject matter.

 

4.      EFFECTIVENESS . The effectiveness of this Amendment is hereby conditioned upon receipt by Apple of a fully executed copy of this Amendment from each party hereto.

 

5.      REAFFIRMATION . Each party hereto acknowledges and reaffirms all of its obligations and duties under the Transaction Documents.

 

6.      LIMITED EFFECT . In the event of a conflict between the terms and provisions of this Amendment and the terms and provisions of the Transaction Documents, the terms and provisions of this Amendment shall govern. In all other respects, the Transaction Documents, as amended and supplemented hereby, shall remain in full force and effect.

 

7.     COUNTERPARTS; EFFECTIVENESS . This Amendment may be executed in any number of counterparts and by different parties on separate counterparts, each of which when so executed and delivered shall be deemed to be an original. All such counterparts, taken together, shall constitute but one and the same Amendment. This Amendment shall become effective upon the execution of a counterpart of this Amendment by each of the parties hereto. This Amendment is a Transaction Document and is subject to all the terms and conditions, and entitled to all the protections, applicable to Transaction Documents generally.

 

[ remainder of page left blank intentionally; signatures to follow ]

 

 

 

 

IN WITNESS WHEREOF, the parties hereto have executed this Amendment as of the date first set forth above.

 

 

APPLE INC.,  

 

a California corporation 

 

 

 

 

 

 

 

 

 

 

By: 

/s/ Zadesky

 

Name: 

Zadesky

 

Title: 

VP Product Design 

 

 

 

 

 

 

 

LIQUIDMETAL TECHNOLOGIES, INC.   

 

 

 

 

 

 

 

 

 

 

By: 

/s/ Ricardo A. Salas 

 

Name: 

Ricardo A. Salas

 

Title: 

Executive Vice President 

 

 

 

 

 

 

 

LIQUIDMETAL COATINGS, LLC  

 

 

 

 

 

 

 

 

 

 

By: 

/s/ Ricardo A. Salas 

  Name: Ricardo A. Salas
  Title: Secretary
     
     

 

CRUCIBLE INTELLECTUAL PROPERTY, LLC

     
     
     
  By: /s/ Ricardo A. Salas
  Name: Ricardo A. Salas
  Title: President 

 

 

Amendment Number Two to Master Transaction Agreement

 

 

Exhibit 31.1

 

CERTIFICATIONS

 

I, Thomas Steipp, certify that:

 

1. I have reviewed this quarterly report on Form 10-Q of Liquidmetal Technologies, Inc.;

 

2. Based on my knowledge, this report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this report;

 

3. Based on my knowledge, the financial statements, and other financial information included in this report, fairly present in all material respects the financial condition, results of operations and cash flows of the registrant as of, and for, the periods presented in this report;

 

4. The registrant's other certifying officer and I are responsible for establishing and maintaining disclosure controls and procedures (as defined in Exchange Act Rules 13a-15(e) and 15d-15(e)) and internal control over financial reporting (as defined in Exchange Act Rules 13a-15(f) and 15d-15(f)) for the registrant and have:

 

a)     Designed such disclosure controls and procedures, or caused such disclosure controls and procedures to be designed under our supervision, to ensure that material information relating to the registrant, including its consolidated subsidiaries, is made known to us by others within those entities, particularly during the period in which this report is being prepared;

 

b)     Designed such internal control over financial reporting, or caused such internal control over financial reporting to be designed under our supervision, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles;

 

c)     Evaluated the effectiveness of the registrant's disclosure controls and procedures and presented in this report our conclusions about the effectiveness of the disclosure controls and procedures, as of the end of the period covered by this report based on such evaluation; and

 

d)     Disclosed in this report any change in the registrant’s internal control over financial reporting that occurred during the registrant’s most recent fiscal quarter (the registrant’s fourth fiscal quarter in the case of an annual report) that has materially affected, or is reasonably likely to materially affect, the registrant’s internal control over financial reporting; and

 

5. The registrant's other certifying officer and I have disclosed, based on our most recent evaluation of internal control over financial reporting, to the registrant's auditors and the audit committee of the registrant's board of directors (or persons performing the equivalent functions):

 

a)     All significant deficiencies and material weaknesses in the design or operation of internal control over financial reporting which are reasonably likely to adversely affect the registrant's ability to record, process, summarize and report financial information; and

 

b)     Any fraud, whether or not material, that involves management or other employees who have a significant role in the registrant's internal control over financial reporting.

 

Date: August 12, 2014                        /s/ Thomas Steipp                    

Thomas Steipp

President and Chief Executive Officer

(Principal Executive Officer)

 

 

 

 

 

 

 

 

27  

Exhibit 31.2

 

CERTIFICATION S

I, Tony Chung, certify that:

 

1. I have reviewed this quarterly report on Form 10-Q of Liquidmetal Technologies, Inc.;

 

2. Based on my knowledge, this report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this report;

 

3. Based on my knowledge, the financial statements, and other financial information included in this report, fairly present in all material respects the financial condition, results of operations and cash flows of the registrant as of, and for, the periods presented in this report;

 

4. The registrant's other certifying officer and I are responsible for establishing and maintaining disclosure controls and procedures (as defined in Exchange Act Rules 13a-15(e) and 15d-15(e)) and internal control over financial reporting (as defined in Exchange Act Rules 13a-15(f) and 15d-15(f)) for the registrant and have:

 

a)     Designed such disclosure controls and procedures, or caused such disclosure controls and procedures to be designed under our supervision, to ensure that material information relating to the registrant, including its consolidated subsidiaries, is made known to us by others within those entities, particularly during the period in which this report is being prepared;

 

b)     Designed such internal control over financial reporting, or caused such internal control over financial reporting to be designed under our supervision, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles;

 

c)     Evaluated the effectiveness of the registrant's disclosure controls and procedures and presented in this report our conclusions about the effectiveness of the disclosure controls and procedures, as of the end of the period covered by this report based on such evaluation; and

 

d)     Disclosed in this report any change in the registrant’s internal control over financial reporting that occurred during the registrant’s most recent fiscal quarter (the registrant’s fourth fiscal quarter in the case of an annual report) that has materially affected, or is reasonably likely to materially affect, the registrant’s internal control over financial reporting; and

 

5. The registrant's other certifying officer and I have disclosed, based on our most recent evaluation of internal control over financial reporting, to the registrant's auditors and the audit committee of the registrant's board of directors (or persons performing the equivalent functions):

 

a)     All significant deficiencies and material weaknesses in the design or operation of internal control over financial reporting which are reasonably likely to adversely affect the registrant's ability to record, process, summarize and report financial information; and

 

b)     Any fraud, whether or not material, that involves management or other employees who have a significant role in the registrant's internal control over financial reporting.

 

 

Date: August 12, 2014                        /s/ Tony Chung                    

Tony Chung

Chief Financial Officer

(Principal Financial and Accounting Officer)

 

 

 

 

 

 

 

 

 

28

Exhibit 32.1

 

WRITTEN STATEMENT OF THE CHIEF EXECUTIVE OFFICER

PURSUANT TO 18 U.S.C. 1350

 

Solely for the purposes of complying with 18 U.S.C. 1350, I, the undersigned Chief Executive Officer of Liquidmetal Technologies, Inc. (the “Company”), hereby certify, based on my knowledge, that the Quarterly Report on Form 10-Q of the Company for the quarter ended June 30, 2014 (the “Report”) fully complies with the requirements of Section 13(a) of the Securities Exchange Act of 1934 and that the information contained in the Report fairly presents, in all material respects, the financial condition and results of operations of the Company.

 

 

/s/ Thomas Steipp               

Thomas Steipp, President and Chief Executive Officer

August 12, 2014

 

 

 

 

 

 

 

 

 

29

Exhibit 32.2

 

WRITTEN STATEMENT OF THE CHIEF FINANCIAL OFFICER

PURSUANT TO 18 U.S.C. 1350

 

Solely for the purposes of complying with 18 U.S.C. 1350, I, the undersigned Chief Financial Officer of Liquidmetal Technologies, Inc. (the “Company”), hereby certify, based on my knowledge, that the Quarterly Report on Form 10-Q of the Company for the quarter ended June 30, 2014 (the “Report”) fully complies with the requirements of Section 13(a) of the Securities Exchange Act of 1934 and that the information contained in the Report fairly presents, in all material respects, the financial condition and results of operations of the Company.

 

 

/s/ Tony Chung                         

Tony Chung, Chief Financial Officer

August 12, 2014

 

 

 

 

 

 

 

 

 

30