Table of Contents

​

​

UNITED STATES SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

​

FORM 10-K

​

​

​

Commission File Number: 001-38821

Lordstown Motors Corp.

(Exact name of registrant as specified in its charter)

​

Registrant’s telephone number: (234) 285-4001

Securities registered pursuant to Section 12(b) of the Act:

​

​

Securities registered pursuant to Section 12(g) of the Act: None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ☐ No ☒

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Exchange Act. Yes ☐ No ☒

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes☒ No ☐

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes ☒ No ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, smaller reporting company or an emerging growth company. See definitions of "large accelerated filer," "accelerated filer," "smaller reporting company" and "emerging growth company" in Rule 12b-2 of the Exchange Act.

​

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act.   ☐

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report. ☐

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes ☐ No ☒

As of June 30, 2020, the last business day of the registrant’s most recently completed second fiscal quarter, the aggregate market value of the Class A common stock outstanding, other than shares held by persons who may be deemed affiliates of the registrant, computed by reference to the closing sales price for the Class A common stock on June 30, 2020, as reported on the Nasdaq Capital Market, was approximately $288,400,000.

As of March 5, 2021 there were 176,579,376 shares of Class A common stock, $0.0001 par value, issued and outstanding.

​

​

​

​

Table of Contents

INDEX

2

Table of Contents

3

Table of Contents

​

​

​

​

​

​

​

4

Table of Contents

consideration of $500 million (the “PIPE Investment” and, together with the Business Combination, the “Transactions”). The proceeds from the PIPE Investment provided us with additional capital. Concurrently with the Closing, we also issued to Brown Gibbons Lang & Company (“BGL”) redeemable warrants entitling BGL to purchase, in the aggregate, 1,649,489 shares of Class A common stock (the “BGL Warrants”).

On January 27, 2021, we redeemed all of the public warrants (the “Public Warrants”) originally issued in the Initial Public Offering that remained outstanding. The BGL Warrants and the private placement warrants issued to DiamondPeak’s sponsor, DiamondPeak Sponsor LLC (the “Sponsor”), and certain funds and accounts managed by subsidiaries of BlackRock, Inc. (collectively, the “anchor investor”) (including any such warrants transferred to the Sponsor’s or anchor investor’s affiliates, the “Private Placement Warrants”) were not subject to redemption and as of March 1, 2021, 2,306,627 Private Placement Warrants and 1,649,489 BGL Warrants were outstanding. Prior to the redemption, the term “Warrants” collectively refers to the Public Warrants, the Private Placement Warrants and the BGL Warrants and, after the redemption, collectively refers to the Private Placement Warrants and the BGL Warrants. The rights of holders of the Warrants are governed by a warrant agreement between American Stock Transfer & Trust Company, as warrant agent, and us (the “Warrant Agreement”).

Overview

Our mission is to be a catalyst in the world’s transition to sustainable energy. We design, develop, and are in the process of manufacturing the Endurance, the first electric full-size pickup truck targeted for sale to fleet customers. In addition, we are leveraging our technologies by investing in the development additional all-electric vehicles geared for the commercial market. Located in Lordstown, Ohio, our factory (the “Lordstown Complex”) spans 6.2 million square feet and is in a near-production-ready state. We also intend to build company-owned service centers where we offer maintenance, repair, parts, and other services related to our products.

Since inception, we have been developing our flagship vehicle, the Endurance™, an electric full-size pickup truck. We introduced the Endurance™ in June 2020 and expect to build beta and pre-production vehicles during the first half of 2021. We are targeting commencement of commercial production of the Endurance in September 2021 and initial sales starting in late 2021.

Our Strengths and Strategy

Our goal is to achieve a leadership position as an original equipment manufacturer (“OEM”) vehicle supplier to the commercial fleet industry. We intend to do so by focusing on the following strengths.

5

Table of Contents

Industry and Competition

The electric vehicle industry has grown rapidly over the past 10 years. We believe this growth will continue into the future as increased offerings, technological developments, reduced costs, and additional charging infrastructure are expected to drive broader adoption. In addition, we expect countries around the world to become increasingly focused on meeting climate goals, in part, by reducing the environmental effects of internal combustion engine vehicles. This increased focus may include offering financial incentives to promote the use of electric vehicles and commitments from major automotive manufacturers to electrification as part of their long-term plans.

Our target market is the commercial fleet market, which is defined as commercial and governmental organizations with three or more vehicles. This market is represented by companies such as logistics companies, service providers, utilities, airlines and airport operators, telecommunication companies and insurance companies, as well as small- to mid-sized companies with less than 10 vehicles in their fleets. Government entities, states and municipalities are another segment of the market that we believe will participate in the transition to electric vehicles and represent potential customers.

The commercial fleet market presents a large potential market with strong demand for vehicles. We believe that there is significant opportunity to gain a share of this market by offering electric vehicles. We believe that commercial demand for electric trucks will be driven by the potential for lower total cost of ownership in comparison to the cost of ownership associated with traditional gasoline and diesel internal combustion engine pickup trucks. In addition, the specific use cases for electric trucks by fleet operators which often involve multiple shorter trips, can alleviate the range anxiety that has been a limiting factor in electric vehicle adoption to date. By effectively marketing to commercial fleet operators, we believe we have the potential to secure significant and recurring purchases for our electric vehicles.

Although competition within the broader electric vehicle and pickup market is intense, we believe that our focus on fleet customers will limit direct competition, at least initially. While established OEMs and new entrants to the industry have announced plans to develop electric pickup trucks, most of these potential competitors are expected to focus on the consumer market as their point of entry into the market. In such cases, the vehicles produced may focus more on attributes that provide for mass consumer appeal, which can be either costly or limit the functionality required by the fleet market. By comparison, we are focusing on the specific needs of commercial fleets with the development and production of the Endurance and expect to have significantly less direct competition in this market at the outset.

The Endurance

Our flagship vehicle will be the Endurance. The Endurance will be composed of three main components: (1) the frame and body; (2) four electric in-wheel hub motors; and (3) the battery pack. The design of the Endurance body will follow the same design principles that have made pickup trucks ideal for the fleet market, while its chassis will be designed for safety, efficiency and flexibility. Our use of in-wheel hub motors together with the Endurance’s proprietary software, is expected to lead to better traction and handling, making it an ideal vehicle for fleet operators. The Endurance will have a unique design with the use of electric in-wheel hub motors and a proprietary battery configuration. With this design, we believe that the Endurance will have among the fewest moving parts of any highway- capable production vehicle ever produced and will have a total cost of ownership that is significantly lower than comparable pickup trucks that are currently commercially available.

6

Table of Contents

Based on our estimated specifications, we expect the Endurance to have a 0-60 miles per hour acceleration time of 5.5 seconds, a towing capacity of 7,500 pounds, a curb weight of 4,200 pounds and a total gross vehicle weight of 7,300 pounds — making it competitive with comparable internal combustion engine vehicles. We believe we will be able to achieve a 5-star safety rating for the Endurance and have conducted software-based simulated crash testing that supports this belief.

We expect to introduce the Endurance at a base retail price of $52,500, which would result in a net cost to the buyer of $45,000 if the currently available U.S. federal tax credit of $7,500 for the purchase of alternative fuel vehicles remains in effect.

While we believe the initial purchase price for the Endurance will be competitive with the purchase prices for comparable internal combustion engine and diesel-fueled pickup trucks, we believe that many consumers, especially in the commercial fleet market, consider the total cost of ownership of a vehicle to be more important than the initial purchase price of a vehicle. We expect the total cost of ownership of the Endurance to be significantly lower than the total cost of ownership of internal combustion engine and diesel-fueled pickup trucks due to lower operating and maintenance costs.

In regard to operating costs, we estimate that the Endurance will have 500% better fuel economy than competing internal combustion engine pickups. This is based on management estimates of 75 miles per gallon equivalent (“MPGe”) for the Endurance, compared to approximately 15 miles per gallon for competing internal combustion engine pickups. Management’s estimate of 75 MPGe for the Endurance is the result of our simulations based on the Endurance’s propulsion power requirements for its planned weight and other specifications, as well as modeled requirements for supporting systems. As a result of these simulations, management estimates the Endurance will utilize 0.45 kilowatt-hour (“kWh”) per mile. This would be equivalent to approximately 75 MPGe based on the estimated energy equivalence of one gallon of gasoline to 33.7 kWh of electricity, per the U.S. Environmental Protection Agency’s (the “EPA”) MPGe methodology.

In regard to maintenance costs, we believe that the capabilities of electric vehicles generally and in particular the low number of parts that will be included in the Endurance will lead to lower maintenance costs. Because it is electric and by incorporating in-wheel hub motors, the Endurance will not include many parts that are included in internal combustion engine vehicles. This will significantly reduce the need for routine maintenance and eliminate the need to service parts and materials for internal combustion engines, such as spark plugs, oil, oil filters, lubricants and transmission fluid, as well as eliminate the potential replacement of those components. In addition, the Endurance’s brake pads and rotors are expected to last longer than those in internal combustion engine pickup trucks due to regenerative braking from the hub motors on all four wheels, representing another maintenance cost saving.

Based on these assumptions, over a five-year period, we estimate that the average total cost of ownership of the Endurance will be significantly less than the average total cost of ownership of a comparable internal combustion engine pickup truck.

Frame and Body

We have designed the Endurance to have similar functionality and a comparable look and feel to other commercially available pickup trucks and expect this design to appeal to commercial fleet customers seeking a familiar design and style. The absence of a traditional internal combustion engine and drivetrain has allowed us to focus the design of the Endurance frame around the cabin to better protect the occupants and the batteries. By using existing and proven design concepts, we hope to reduce engineering costs and minimize issues in meeting safety and technical requirements and in obtaining necessary certifications.

The Endurance body is designed to be fully compatible with existing third-party parts, upfitting options and accessories. Depending on how our timing and demand aligns with the availability and cost of these parts, this design provides us with the option to source certain parts under an agreement we have entered into with GM. This agreement provides us with access to certain non-customer-facing GM parts, including airbags, steering columns and steering wheels, based on the supply GM has available. To the extent we utilize this arrangement, we expect that it will reduce the time that it will take to build out these aspects of our supply chain and bring the Endurance to market and reduce our tooling and development costs. We expect to develop some parts in house where such development provides us with better economics and certainty regarding production timing.

7

Table of Contents

Electric In-Wheel Hub Motors

The Endurance will have four electric in-wheel hub motors. We have entered into a licensing agreement with Elaphe Propulsion Technologies Ltd. (“Elaphe”) to produce and manufacture the hub motors at the Lordstown Complex. As we retool the Lordstown Complex and ramp up production, Elaphe will initially manufacture its Model L-1500 in-wheel hub motors for us. As part of the retooling of the Lordstown Complex, we are in the process of developing our own manufacturing line for the in-wheel hub motors, and upon completion, we expect to manufacture the in-wheel hub motors at the Lordstown Complex under license from Elaphe. We believe the hub motors will provide efficiency, reliability and design flexibility and offer a number of advantages over traditional internal combustion engines. For example, in-wheel hub motors place the entire propulsion system within the wheels, providing a significant amount of design flexibility for the remainder of the vehicle. In-wheel hub motors also eliminate the need for many parts found in both traditional and hybrid vehicles, including a drivetrain, gears, axles, differentials, universal joints, transmissions, oil, oil filters, spark plugs and engine valves, which will reduce the number of moving parts in the Endurance compared to other traditional, hybrid and electric vehicles available today and are expected to drive lower maintenance costs.

By integrating its software system with the hub motors, we aim to effectively have a motor and mind in each wheel of the Endurance, providing favorable four-wheel drive traction, control and efficiency when compared to other pickup trucks currently available to commercial fleets. The use of in-wheel hub motors and the absence of a traditional internal combustion engine create a large front crush zone, enhancing the safety of the vehicle and enabling the Endurance to have a “frunk” (a small trunk located at the front of the cab).

The motors will be equipped with a regenerative braking mechanism that captures and stores power generated by deceleration of the vehicle. Many of the systems that will enable the use of in-wheel hub motors, such as the software that will interact and direct each of the four motors, as well as the independent front suspension, are proprietary to us.

Battery Pack

The Endurance will be powered by battery packs in a configuration that we believe will be unique. The battery packs will be completely encased in the chassis, which is intended to better protect the batteries, and enhance durability, and increase safety. Further, the location of the battery packs in the Endurance’s floor results in a low center of gravity, which is intended to give the vehicle a strong yet lightweight frame with advanced handling capabilities. We expect that our all-electric and all-wheel drive vehicles will result in an approximately 250-mile battery range and the equivalent of 75 miles per gallon fuel consumption due to the size and number of battery cells that can be placed in the Endurance. If achieved, we believe this range would make the Endurance highly suitable for most commercial fleet vehicles and should significantly reduce range anxiety.

We have purchased units of the Samsung 21700 battery cell for use in engineering and pre- production vehicles and have demonstrated successful use of this cell in Lordstown-designed and built prototype battery packs, which will ultimately be used in production vehicles. We have entered into supply agreements with Samsung and LG Energy Solution to purchase lithium-ion cylindrical battery cells. The agreements generally have initial four- to five-year terms, subject to earlier termination rights, and provide for certain pricing and minimum quantity parameters.

Facilities

The Lordstown Complex, a 785-acre manufacturing facility that we acquired on November 7, 2019, is strategically located in Lordstown, Ohio, in close proximity to I-80, the major interstate highway between Cleveland, Ohio, and Pittsburgh, Pennsylvania. Lordstown, Ohio, and the surrounding area is home to a highly trained workforce experienced with working in the Lordstown Complex and manufacturing vehicles. In light of the Lordstown Complex’s convenient and central location, we envision transforming Lordstown, Ohio, and the surrounding Mahoning Valley into “Voltage Valley,” an epicenter for electric vehicle production in the United States with multiple suppliers and other industry participants establishing operations in and around the area.

The Lordstown Complex consists of four main facilities in one location, in addition to multiple support buildings: (1) General Assembly, (2) a Body Shop, (3) Stamping and (4) Paint Shop. The Lordstown Complex is in near-production-ready condition with modern robotics, painting, assembly and stamping equipment and requires a retooling investment in order to commence full production of the Endurance.

8

Table of Contents

Construction is in process on an 800,000 square foot propulsion production area, which will house production lines for in-wheel motors and lithium-ion battery packs, and is expected in time for the targeted start of production of the Endurance in September 2021.

As part of these retooling efforts, we will purchase and install new machines, tooling, fixtures and quality and testing equipment, make additional investments in software, control and other information technology systems, modify conveyor and robotics systems, convert the existing paint line from dry powder to a “wet on wet” process and create new hub motor and battery packing assembly lines.

We expect to complete the retooling in the first half of 2021 in order to enable commercial production of the Endurance to commence in September 2021.

Key Agreements, Partnerships and Technology

GM

We have entered into several agreements with GM and its affiliates related to the acquisition and operation of the Lordstown Complex and to provide financing arrangements. On November 7, 2019, we entered into an Asset Transfer Agreement, Operating Agreement and Mortgage Agreement (collectively, the “GM Property Agreements”) with GM providing for our acquisition and the continued operation of the Lordstown Complex. See “Certain Relationships and Related Party Transactions” for additional information.

On April 3, 2020, we entered into an agreement under which GM provides us with access to certain non-customer-facing GM parts, including airbags, steering columns and steering wheels.

Elaphe Propulsion Technologies Ltd.

We have partnered with Elaphe to produce its hub motors. We entered into a license agreement with Elaphe, pursuant to which Elaphe granted us a perpetual license to manufacture the Elaphe Model L-1500 Endurance Motor for use in the United States, Canada and Mexico in exchange for a license fee calculated on a per motor basis. Elaphe is required to obtain our consent before it is permitted to market, sell or otherwise distribute (i) the L-1500 hub motor, any replacement for it or a hub motor for a pickup truck replacing the Endurance within the United States, Canada and Mexico, or (ii) the Elaphe Model L-1500 Endurance Motor for our Endurance or our substitute model pickup truck, or any replacement or substitute Elaphe design hub motor product for our Endurance or our substitute model pickup truck. As we retool the Lordstown Complex and ramp up production, Elaphe will initially manufacture its Model L-1500 in-wheel hub motors for us. We also entered into a facilities and support agreement with Elaphe, and as we transition manufacturing operations to the Lordstown Complex, Elaphe will provide consultation services to us for manufacturing processes, vendor relations and product support relationships as well as on-site support for the manufacturing line set-up, testing and final operations.

Workhorse Group Inc.

On November 7, 2019, the Company entered into a transaction with Workhorse Group Inc., for the purpose of obtaining certain intellectual property. In connection with granting this license, Workhorse Group received 10% of the outstanding Legacy Lordstown common stock and was entitled to royalties of 1% of the gross sales price of the first 200,000 vehicle sales. In November 2020, we pre-paid a royalty payment to Workhorse Group in the amount of $4.75 million. The upfront royalty payment represents an advance on royalties due on 1% of the gross sales price of the first 200,000 vehicles sold, but only to the extent that the aggregate amount of such royalty fees exceeds the amount paid upfront.

​

Other Partners

As production of the Endurance ramps up, we may partner with key service providers to enable us to serve fleet operators and other customers efficiently and effectively for aftermarket parts and service and charging infrastructure. We are in discussions with major service providers that could provide access to their nationwide networks of service centers. For example, we are in discussions with Camping World Holdings, Inc. (“Camping World”) to build out a national service and parts network. Camping World has a national footprint of service and collision centers and the ability to offer roadside assistance through an affiliate. By working with Camping World, we believe that these capabilities can be leveraged to provide a comprehensive service and support system for our customers.

9

Table of Contents

We believe that most fleet operators use service agreements with third-party service providers to maintain and repair their fleets and to provide aftermarket parts, and that an arrangement with a national service provider might be attractive to fleet customers considering purchasing the Endurance. In March 2021, we announced a series of agreements with affiliates of Holman Enterprises, including a co-marketing agreement that establishes a framework for us and ARI, Holman’s leasing and fleet management services organization, to co-market and co-develop business opportunities with our respective customers and a vehicle procurement agreement that establishes a framework pursuant to which ARI would use reasonable efforts to obtain orders for the Endurance from its clients at specified volumes over a three-year term on the terms set forth in the agreement.

We are also evaluating partnerships with electric vehicle charging station providers to provide Endurance purchasers with access to their networks. As fleet operators also typically bring their vehicles back to a central location each day, vehicle charging infrastructure can also be installed at those locations.

Research and Development

We have made and expect to continue to make significant investments in research and development in order to complete the design and engineering, testing and certification of the Endurance and to commence commercial production and sales. We expect these costs will primarily relate to research and development activities as we produce, test and validate engineering and pre-production vehicles, integrate third-party components, develop certain of our own components, develop our proprietary software and systems, complete cabin design work and prepare for commercial production. Our research and development also includes efforts to seek to leverage our technologies to develop additional all-electric vehicles geared for the commercial market and electric vehicle related technologies. We expect that most of these activities will be completed at the Lordstown Complex, in Irvine, California and in Farmington Hills, Michigan, by our employees and intend to hire additional research and development personnel in the near term. However, we have utilized third party design and engineering firms for certain development activities to date and may continue to do so as we continue to ramp up operations.

Sourcing

The Endurance’s bill of materials is expected to consist of approximately 2,000 components with its 10 most expensive components representing almost 90% of the anticipated cost of the Endurance. As discussed above, we have an agreement with Elaphe to license and provide manufacturing services with respect to its in-wheel hub motors, and we have entered into agreements with battery manufacturers to purchase lithium-ion cylindrical battery cells. Motor and battery cells represent two of the Endurance’s most critical components. We also expect that the flexible and compatible design of the Endurance and our agreement with GM that provides access depending on availability to certain non-customer-facing GM parts, including airbags, steering columns and steering wheels, will offer significant benefits as we build out and finalize our supply chain.

We believe we will be able to obtain adequate sources of supply for the equipment, components and raw materials necessary to manufacture and sell the Endurance in accordance with our plans. Disruptions to the supply chain due to the COVID-19 pandemic have resulted in challenges in obtaining certain components and raw materials in a timely manner and/or at favorable pricing. As a result, we have adjusted and may continue to adjust our design, production processes and cost structure to adapt to these limitations. Further changes in business conditions, the impact of COVID-19 or other pandemics, governmental changes and other factors beyond our control or that we do not presently anticipate could affect our ability to receive the material we need for production. As we and the broader electric vehicle industry grow in the future, there is no guarantee that battery cell manufacturers will be able and willing to continue to grow their capacity to meet increased demand. In addition, the automotive and other industries are currently experiencing a global supply shortage of semiconductors, which could impact our testing and production costs, volume and timeline. Prices and supply of the key raw materials that will be included in the Endurance and its components, such as steel, aluminum, copper, neodymium, nickel and cobalt, have been and can continue to be volatile and an increased demand for certain materials, whether due to electric vehicle growth or other factors, or reduced supply for certain materials, whether due to trade restrictions or other factors, may increase our costs or delay the timing to obtain the materials or components and impact our profitability.

Intellectual Property

Intellectual property is important to our business. We intend to establish and protect the intellectual property and proprietary technology that we develop through a combination of trademarks, patents, trade secrets and know-how. We

10

Table of Contents

have filed several trademark applications with the United States Patent and Trademark Office, but as of this date no trademarks have issued.

We expect to develop additional intellectual property and proprietary technology as the Endurance’s engineering and validation activities proceed. Technologies that we have and intend to invest in and develop include engineering software, powertrain systems and controls, infotainment, cybersecurity, telematics and electrical architecture hardware and software. As we develop our technology, we will continue to assess whether additional trademark or patent applications or other intellectual property registrations are appropriate. We also seek to protect our intellectual property and proprietary technology, including trade secrets and know-how, through limited access, confidentiality and other contractual agreements.

In addition to the intellectual property that we own, we license and utilize key technologies under our agreements with Elaphe. See “— Key Agreements, Partnerships and Technology” above for more information.

We cannot be certain that we will be able to adequately develop and protect our intellectual property rights, or that other companies will not claim that we are infringing upon their intellectual property rights. See “Risk Factors — Risks Related to Our Business Operations and Industry.”

Sales and Marketing

We plan to focus our sales and marketing efforts on direct sales through our subsidiary, Lordstown EV Sales, LLC, to commercial fleet operators and fleet management companies rather than through third-party dealerships.

An important aspect of our sales and marketing strategy involves pursuing relationships with specialty upfitting and fleet management companies to incorporate the Endurance into their fleet management programs. Fleet management companies sometimes purchase vehicles and then lease them to their own customers. In other instances, fleet management companies facilitate purchasing or leasing of vehicles by their customers which are generally large fleets. For example, in March 2021, we announced a series of agreements with an affiliate of Holman Enterprises, including a co-marketing agreement that establishes a framework for us and ARI, Holman’s fleet management services organization, to co-market and co-develop business opportunities with our respective customers and a vehicle procurement agreement that establishes a framework pursuant to which ARI would use reasonable efforts to facilitate orders from its leasing clients for the Endurance over a three-year time period on the terms set forth in the agreement.

Human Capital Resources

As of December 31, 2020, we employed approximately, 320 full-time personnel in the areas of manufacturing, engineering, marketing, sales, facilities, human resources, IT, supply chain, accounting and finance. These employees are engineering the Endurance and preparing the plant for mass production. We anticipate significant employee growth in the near term as we prepare for full production of the Endurance. We expect to end 2021 with over 1,000 employees.

Governmental Support and Regulation

We operate in an industry that is subject to extensive vehicle safety and testing and environmental regulations, some of which evolve over time as new technologies are introduced to the market. Government regulations regarding the manufacture, sale and implementation of products and systems similar to our electric vehicles are subject to future change. We cannot predict what effect, if any, such changes will have upon our business. Violations of these regulations may result in substantial civil and criminal fines, penalties and/or orders to cease the operations in violation or to conduct or pay for corrective work. In some instances, violations may also result in the suspension or revocation of permits and licenses. In addition to the domestic

11

Table of Contents

regulations and standards discussed below, we expect to comply with Canadian standards and believe these standards are substantially similar to the domestic standards. Based on our initial business plan, we do not expect to be subject to regulatory requirements outside of the U.S. and Canada.

Government Support

We believe that our operations at the Lordstown Complex and our business plan can have a meaningful, beneficial effect in a region that has seen significant job losses and adverse economic effects. Our management expects to continue to engage in discussions with local, state and federal officials about these benefits and will explore the availability of appropriate grant, loan and tax incentives.

We have accepted an invitation from the U.S. Department of Energy to start the due diligence process toward securing an Advanced Technology Vehicles Manufacturing (“ATVM”) loan. Established in 2007, ATVM supports the development of fuel-efficient, advanced technology vehicles in the United States. The program provides loans to automotive or component manufacturers for establishing manufacturing facilities in the United States that produce fuel-efficient vehicles.

Vehicle Safety and Testing Regulation

Our vehicles will be subject to, and must comply with, many regulations established by the National Highway Traffic Safety Administration (“NHTSA”), including applicable U.S. federal motor vehicle safety standards (“FMVSS”). As an OEM, we must self-certify that our vehicles meet or otherwise are exempt from all applicable FMVSS and the NHTSA bumper standards before a vehicle can be imported into or sold in the United States. There are many FMVSS that will apply to our vehicles, including crashworthiness and crash avoidance requirements and electric vehicle requirements (e.g., those relating to limitations on electrolyte spillage, battery retention and the avoidance of electric shock after certain crash tests). We expect that our vehicles will meet or otherwise be exempt from all applicable FMVSS. Additionally, there are regulatory changes being considered for several FMVSS, and though we expect to comply with such FMVSS, there is no assurance of compliance until the final regulatory changes have been enacted.

In addition to FMVSS, we must comply with other NHTSA requirements and other federal laws and regulations administered by NHTSA, including early warning reporting requirements regarding warranty claims, field reports, death and injury reports, recalls and owner’s manual requirements. We also must comply with the Automobile Information and Disclosure Act, which requires OEMs to disclose certain information regarding the OEM’s suggested retail price, optional equipment and pricing. Further, this law allows inclusion of fuel economy ratings, as determined by the U.S. EPA, and crash test ratings, as determined by NHTSA, if such tests are conducted.

Battery Safety and Testing Regulations

Our battery packs must conform to mandatory regulations governing the transport of “dangerous goods” that may present a risk in transportation, which items include lithium-ion batteries and are subject to regulations issued by the Pipeline and Hazardous Materials Safety Administration (“PHMSA”). These regulations are based on the UN Recommendations on the Safe Transport of Dangerous Goods - Model Regulations and related UN Manual Tests and Criteria. The regulations vary by the mode of transportation by which these items are shipped (e.g., by ocean vessel, rail, truck or air).

Environmental Credits

In connection with the delivery and placement into service of our zero-emission vehicles (“ZEV”), under the U.S. EPA’s and California’s Greenhouse Gas (“GHG”) rules and standards and the U.S. DOT’s Corporate Average Fuel Economy (“CAFÉ”) standards for mobile sources, and under California’s ZEV standard, we will earn tradable credits that can be sold to other OEMs. Like the United States, California also has its own GHG emissions standard that seeks to reduce GHGs over time. Other U.S. states, including Colorado, Connecticut,

12

Table of Contents

Maine, Maryland, Massachusetts, New Jersey, New York, Oregon, Rhode Island and Vermont, have adopted some or all of California’s standards. We intend to take advantage of these regulatory frameworks by registering and selling GHG, CAFÉ and ZEV credits. In addition, we have entered into an emissions credit agreement with GM pursuant to which, and subject to the terms of which, during the first three annual production/model years wherein we produce vehicles at least ten months out of the production/model year, the counterparty will have the option to purchase such emissions credits as well as emissions credits from any other U.S. state, country or jurisdiction generated by vehicles produced by us not otherwise required by us to comply with emissions laws and regulations at a purchase price equal to 75% of the fair market value of such credits. While we expect that our first three annual production/model years for the purpose of this agreement will be 2022, 2023 and 2024, it is possible that this agreement could extend beyond these model years if we do not achieve ten or more months of production during those annual production/model years.

Environmental Regulations

We are subject to extensive environmental laws and regulations, involving, among other matters, water use, discharge air emissions, use of chemicals and recycled materials, energy sources, storage, handling, treatment, transportation and disposal of hazardous materials, the protection of the environment, natural resources and endangered species and the remediation of environmental contamination. We are required to obtain and comply with the terms and conditions of environmental permits, many of which may be difficult and expensive to obtain and must be renewed on a periodic basis. A failure to comply with these laws, regulations or permits could result in substantial civil and criminal fines and penalties and the suspension or loss of such permits, and possibly orders to cease the non-compliant operations.

The U.S. Clean Air Act requires that we obtain a Certificate of Conformity from the U.S. EPA for our vehicles prior to their entry into commerce in all 50 states. In addition, we must obtain an Executive Order from the California Air Resources Board (“CARB”) in order to sell vehicles in California and those states that have adopted its standards. The Certificate of Conformity and Executive Order are required for each model year. A failure to apply for and obtain a Certificate of Conformity or Executive Order will result in delays in the sale of the Endurance and adversely affect our business.

As part of the acquisition of the Lordstown Complex, we were required to accept the plant and all property in “as is — where is” condition, including environmental responsibilities. Prior to entering into the Asset Transfer Agreement, with GM (the “Asset Transfer Agreement”), GM completed an investigation and remediation program pursuant to an Administrative Order on Consent (“AOC”) under the U.S. EPA’s Resource Conservation and Recovery Act (“RCRA”) Corrective Action Program. Upon the U.S. EPA’s approval of GM’s investigation and remediation program, GM placed an environmental covenant on the real property, which requires, among other things, (i) the maintenance of nominal financial assurance, (ii) the limitation of the real property to commercial/industrial use, (iii) the prohibition of groundwater for potable use, (iv) the implementation of a dust control plan and (v) and the maintenance of impermeable surfaces on certain areas of the real property. We assumed these responsibilities under the environmental covenant as a condition to the consummation of the transactions contemplated by the Asset Transfer Agreement. We retained the same environmental consultant used by GM to develop and implement the investigation and remediation effort that ultimately led to the U.S. EPA’s approval. This consultant has intimate familiarity with the Lordstown Complex and has allowed us to develop quickly a thorough understanding of the comprehensive nature of the environmental response actions taken by GM and to implement steps to ensure ongoing compliance with the environmental covenant on the real property. To further manage potential environmental risk, we have obtained an environmental liability policy providing certain coverages up to the amount of $25.0 million as required under the Asset Transfer Agreement. In addition, to mitigate the risk associated with the Ohio EPA’s authority to require future remediation activities at the Lordstown Complex related to historic environmental conditions, in April 2020 we entered into an Administrative Order wherein the Ohio EPA agreed to not pursue enforcement actions against us for historical environmental conditions provided that we comply with the terms of the environmental covenant.

13

Table of Contents

Regulatory Matters

On February 17, 2021, the Company received a request from the SEC for the voluntary production of documents and information, including relating to the merger between DiamondPeak and Legacy Lordstown and pre-orders of vehicles.  The Company is responding to the SEC’s requests and intends to cooperate with its inquiry.

Corporate Information

The mailing address of our principal executive office is 2300 Hallock Young Road, Lordstown, Ohio 44481. Our telephone number is (234) 285-4001. Our website address is www.lordstownmotors.com. Our Class A common stock is listed on the NASDAQ Global Stock Market under the symbol “RIDE”. Information contained on our website or connected thereto does not constitute part of, and is not incorporated by reference into, this report.

Emerging Growth Company

We are an “emerging growth company,” as defined in Section 2(a) of the Securities Act, as modified by the Jumpstart Our Business Startups Act of 2012 (the “JOBS Act”), and we take advantage of certain exemptions from various reporting requirements that are applicable to other public companies that are not emerging growth companies, including, but not limited to, not being required to comply with the auditor attestation requirements of Section 404 of the Sarbanes-Oxley Act of 2002 (the “Sarbanes-Oxley Act”), exemptions from or delays in being required to comply with new or revised financial accounting standards and being able to take advantage of the reduced disclosure obligations regarding executive compensation in our periodic reports and proxy statements and exemptions from the requirements of holding a nonbinding advisory vote on executive compensation and stockholder approval of any golden parachute payments not previously approved. See “Risk Factors - The JOBS Act permits “emerging growth companies” like us to take advantage of certain exemptions from various reporting requirements applicable to other public companies that are not emerging growth companies.”

We will remain an emerging growth company until the earlier of (i) the last day of the fiscal year (a) following March 4, 2024, the fifth anniversary of the Initial Public Offering, (b) in which we have total annual gross revenue of at least $1.07 billion or (c) in which we are deemed to be a large accelerated filer, which means the market value of our Class A common stock that is held by non-affiliates exceeds $700.0 million as measured on the last business day of our most recently completed second fiscal quarter, or (ii) the date on which we have issued more than $1.0 billion in non-convertible debt during the prior three-year period. References herein to “emerging growth company” shall have the meaning associated with such term as used in the JOBS Act. We could be subject to the additional requirements associated with being deemed a large accelerated filer as early as of the end of the 2021 fiscal year.

14

Table of Contents

Summary Risk Factor

​

Investing in our Class A common stock involves a high degree of risk because our business is subject to numerous risks and uncertainties, as fully described below. The principal factors and uncertainties that make investing in our Class A common stock risky include, among others:

Risks Related to Our Business Operations and Industry

​

Our limited operating history makes it difficult for us to evaluate our future business prospects.

We are a company with an extremely limited operating history, and have generated no revenue to date. As we attempt to transition from research and development activities to commercial production and sales, it is difficult, if not impossible, to forecast our future results, and we have limited insight into trends that may emerge and affect our business. The estimated costs and timelines that we have developed to reach full scale commercial production are subject to inherent risks and uncertainties involved in the transition from a start-up company focused on research and development activities to the large-scale manufacture and sale of vehicles. There can be no assurance that our estimates related to the costs and timing necessary to complete the design and engineering of the Endurance and to retool the Lordstown Complex will prove accurate. These are complex processes that may be subject to delays, cost overruns and other unforeseen issues. In addition, we have engaged in limited marketing activities to date, so even if we are able to bring the Endurance to market on time and on budget, there can be no assurance that fleet customers will embrace our product in significant numbers. Market conditions, many of which are outside of our control and subject to change, including general economic conditions, the availability and terms of financing, the impacts and ongoing uncertainties created by the COVID-19 pandemic, fuel and energy prices, regulatory requirements and incentives, competition and the pace and extent of vehicle electrification generally, will impact demand for the Endurance and ultimately our success.

15

Table of Contents

Since our inception, we have experienced losses and expect to incur additional losses in the future.

Since inception, we have incurred, and we expect in the future while we grow to incur, losses and negative cash flow, either or both of which may be significant. The working capital funding necessary to start a new electric vehicle manufacturing company is significant, and other companies have tried and failed over the last several years with billions of dollars of investment capital. While we expect to benefit from our management’s experience, the technology we have licensed and developed to date and the advantages offered by the Lordstown Complex, we do not expect to be profitable in the near term as we invest in our business, build capacity and ramp up operations, and we cannot assure you that we will ever achieve or be able to maintain profitability in the future. Failure to become profitable may materially and adversely affect the value of your investment. If we are ever to achieve profitability, it will be dependent upon the successful development and commercial introduction and acceptance of electric pickup trucks such as the Endurance, which may not occur.

Additional funding is likely to be required in the future for a variety of reasons. There can be no assurance that financing will be available to us on favorable terms or at all. If we were not able to continue as a going concern, or if there were doubt about our ability to do so, the value of your investment would be materially and adversely affected.

We are subject to risks related to health epidemics and pandemics, including the ongoing COVID-19 pandemic, which could adversely affect our business and operating results.

We face various risks related to public health issues, including epidemics, pandemics and other outbreaks, including the ongoing COVID-19 pandemic. The effects and potential effects of COVID-19, including, but not limited to, its impact on general economic conditions, trade and financing markets, changes in customer behavior and continuity in business operations, create significant uncertainty.

The spread of COVID-19 has also disrupted the manufacturing, delivery and overall supply chain of vehicle manufacturers and suppliers, and has led to a global decrease in vehicle sales in markets around the world. In particular, the COVID-19 crisis may cause a decrease in demand for our vehicles if fleet operators delay purchases of vehicles or if fuel prices for internal combustion engine vehicles remain low. In addition, the COVID-19 crisis may cause (i) disruptions to our supply chain, including our access to critical raw materials and components, many of which require substantial lead time, or cause a substantial increase in the price of those items, (ii) an increase in other costs as a result of our efforts to mitigate the effects of COVID-19, and (iii) delays in our schedule to full commercial production of the Endurance, among other negative effects.

The pandemic has resulted in government authorities implementing many measures to contain the spread of COVID-19, including travel bans and restrictions, quarantines, shelter-in-place and stay-at- home orders and business shutdowns. These measures may be in place for a significant period of time and may be reinstituted if conditions deteriorate, which could adversely affect our start-up and manufacturing plans. Measures that have been relaxed may be reimplemented if COVID-19 or variants of COVID-19 continue to spread or if vaccination programs are slower or less effective than anticipated . If, as a result of these measures, we have to limit the number of employees and contractors at the Lordstown Complex at a given time, it could cause a delay in retooling efforts or in the production schedule of the Endurance. Further, our sales and marketing activities may be adversely affected due to the cancellation or reduction of in-person sales activities, meetings, events and conferences. If our workforce is unable to work effectively, including due to illness, quarantines, government actions or other restrictions in connection with COVID-19 or variants of COVID-19, our operations will be adversely affected. Our planned operations at a single facility, the Lordstown Complex, concentrate these risks.

The extent to which the COVID-19 pandemic may continue to affect our business will depend on continued developments, which are uncertain and cannot be predicted, and the pandemic has and may continue to exacerbate the other risks described in this report. Even after the COVID-19 pandemic has

16

Table of Contents

subsided, we may continue to suffer an adverse effect on our business due to the global economic effect of COVID-19, including continued supply chain disruption and any economic recession. If the immediate or prolonged effects of the COVID-19 pandemic have a significant adverse impact on government finances, it would create uncertainty as to the continuing availability of incentives related to electric vehicle purchases and other governmental support programs.

We expect to require continued capital investment.

The design, manufacture and sale of vehicles is a capital-intensive business. Our business plan to design, produce, sell and service commercial electric pickup trucks, including the Endurance, is expected to require continued capital investment to fund operations, to continue research and development and to improve infrastructure, and our budget continues to evolve as we seek to expand production capacity more quickly than originally anticipated, face challenges due to volatility in the supply chain and refine our design and production process. We also intend to leverage our technologies to develop additional all-electric vehicles geared for the commercial market, which will require additional capital investment with returns and timelines that will be uncertain. Unlike established OEMs that have greater financial resources than we do, there can be no assurance that we will have access to the capital we need on favorable terms when required or at all. If we cannot raise additional funds when we need them, our financial condition and business could be materially adversely affected.

We may need additional capital in the future, and it may not be available on acceptable terms, if at all.

We may need to access the debt and equity capital markets. However, these sources of financing may not be available on acceptable terms, or at all. Our ability to obtain additional financing will be subject to a number of factors, including market conditions, our operating performance, investor sentiment and our ability to incur additional debt in compliance with any agreements governing our then-outstanding debt. These factors may make the timing, amount, terms or conditions of additional financings unattractive to us. If we raise additional funds by issuing equity, equity-linked or debt securities, those securities may have rights, references or privileges senior to the rights of our currently issued and outstanding equity or debt, and our existing stockholders may experience dilution. If we are unable to generate sufficient funds from operations or raise additional capital, our successful operation and growth could be impeded.

We have accepted an invitation from the U.S. Department of Energy to start the due diligence process toward securing an ATVM loan. Established in 2007, ATVM supports the development of fuel-efficient, advanced technology vehicles in the United States. The program provides loans to automotive or component manufacturers for establishing manufacturing facilities in the United States that produce fuel-efficient vehicles. There can be no assurance that this loan will be available to us.

Failure to successfully retool the Lordstown Complex to support commercial production of electric vehicles could adversely affect our business and results of operations.

While we believe the Lordstown Complex provides significant competitive advantages, retooling and modifying the Lordstown Complex for production of electric vehicles is complicated and presents significant challenges. The size of the Lordstown Complex is massive, spanning over 6.2 million square feet, and many areas need to be retooled and modified. The stamping, body shop, paint and final assembly areas need to be converted from manufacturing traditional internal combustion engine vehicles to manufacturing electric vehicles. We also have started construction of our production facilities to create lines to assemble battery packs. As with any large-scale capital project, it could be subject to delays, cost overruns or other complications. These risks could be exacerbated because we are attempting to modify a complex, originally designed to build traditional internal combustion engine vehicles, to support the emerging technologies behind electric vehicles. In order to commence commercial production at the Lordstown Complex, we will also need to hire and train a significant number of employees and integrate a yet-to-be-fully-developed supply chain. A failure to commence commercial production at the Lordstown Complex on schedule would lead to additional costs and would delay our ability to generate meaningful revenues. In addition, it could diminish the

17

Table of Contents

“first mover” advantage we aim to attain, prevent us from gaining the confidence of potential customers and open the door to increased competition. All of the foregoing could hinder our ability to successfully launch and grow our business and achieve a competitive position in the market.

We will rely on complex machinery for our operations and production involves a significant degree of risk and uncertainty in terms of operational performance and costs.

We will rely heavily on complex machinery for our operations and our production will involve a significant degree of uncertainty and risk in terms of operational performance and costs. Our manufacturing plant will consist of large-scale machinery combining many components. The manufacturing plant components are likely to suffer unexpected malfunctions from time to time and will depend on repairs and spare parts to resume operations, which may not be available when needed.

Unexpected malfunctions of the manufacturing plant components may significantly affect the intended operational efficiency of the Lordstown Complex. Operational performance and costs can be difficult to predict and are often influenced by factors outside of our control, such as, but not limited to, scarcity of natural resources, environmental hazards and remediation, costs associated with decommissioning of machines, labor disputes and strikes, difficulty or delays in obtaining governmental permits, damages or defects in electronic systems, industrial accidents, pandemics, fire, seismic activity and natural disasters. Should operational risks materialize, it may result in the personal injury to or death of workers, the loss of production equipment, damage to manufacturing facilities, monetary losses, delays and unanticipated fluctuations in production, environmental damage, administrative fines, increased insurance costs and potential legal liabilities, all which could have a material adverse effect on our business, results of operations, cash flows, financial condition or prospects.

With our vehicle still under development, we do not have any current customers or any pending orders and there is no assurance non-binding pre-orders and other indications of interest will be converted into binding orders or sales.

Our business model is focused on building relationships with large fleet customers. To date, we have engaged in limited marketing activities and we have no binding purchase orders or commitments from customers. The previously-reported non-binding pre-orders that we have signed do not require customer deposits and may not be converted into binding orders or sales. We have also engaged in discussions with fleet managers and other organizations that have indicated interest from their customers or stakeholders in the Endurance. Until the time that the Endurance’s design and development is complete and tested, we intend to have our beta vehicles available for demonstration to potential customers and the Endurance is commercially available for purchase, and until we are able to scale up our marketing function to support sales, there will be uncertainty as to customer demand for the Endurance. The potentially long wait from the time a non-binding pre-order is made or other indication of interest is provided until the time the Endurance is delivered, and any delays beyond expected wait times, could also impact user decisions on whether to ultimately make a purchase. Even if we are able to obtain binding orders, customers may limit their volume of purchases initially as they assess our vehicles and whether to make a broader transition to electric vehicles.

This may be a long process and will depend on the safety, reliability, efficiency and quality of our vehicles, as well as the support and service that we offer. It will also depend on factors outside of our control, such as general market conditions and broader trends in fleet management and vehicle electrification, that could impact customer buying decisions. As a result, there is significant uncertainty regarding demand for our products and the pace and levels of growth that we will be able to achieve.

18

Table of Contents

Our future growth depends upon our ability to maintain relationships with our existing suppliers and source suppliers for our critical components, and to complete building out our supply chain, while effectively managing the risks due to such relationships.

Our success will be dependent upon our ability to enter into supply agreements and maintain our relationships with suppliers who are critical and necessary to the output and production of our vehicles. We also rely on a small group of suppliers to provide us with the components for our vehicles. The supply agreements we have or may enter into with key suppliers in the future may have provisions where such agreements can be terminated in various circumstances, including potentially without cause, or may not provide for access to supplies in accordance with our timeline or budget. If these suppliers become unable to provide, experience delays in providing or impose significant increases in the cost of, components, or if the supply agreements we have in place are terminated, it may be difficult to find replacement components. Changes in business conditions, pandemics, governmental changes and other factors beyond our control or that we do not presently anticipate could affect our ability to receive components from our suppliers.

Further, we have not secured supply agreements for all of our components. We may be at a disadvantage in negotiating supply agreements for the production of our vehicles due to our limited operating history and continued refinement of our component requirements through the design and testing process. In addition, there is the possibility that finalizing the supply agreements for the parts and components of our vehicles will cause significant disruption to our operations, or such supply agreements could be at costs that make it difficult for us to operate profitably or delay our production schedule.

If we do not enter into long-term supply agreements with guaranteed pricing and availability for our parts or components, we may be exposed to fluctuations in prices, quality and timing of components, materials and equipment. Agreements for the purchase of battery cells contain or are likely to contain pricing provisions that are subject to adjustment based on changes in market prices of key commodities. Substantial increases in the prices for such components, materials and equipment would increase our operating costs and could reduce our margins if we cannot recoup the increased costs. Any attempts to increase the announced or expected prices of our vehicles in response to increased costs could be viewed negatively by our potential customers and could adversely affect our business, prospects, financial condition or operating results.

​

We may experience delays in realizing our projected timelines and cost and volume targets for the production, launch and ramp up of the Endurance and the retooling of the Lordstown Complex, which could harm our business, prospects, financial condition and operating results.

​

Our future business depends in large part on our ability to execute on our plans to develop, manufacture, market and sell or lease the Endurance. Any delay in the financing, design, testing, manufacture and launch of Endurance, or in the retooling of the Lordstown Complex, could materially damage our brand, business, prospects, financial condition and operating results. Vehicle manufacturers often experience delays in the design, testing, manufacture and commercial release of new products.

To the extent we experience delays in the retooling of the Lordstown Complex or delays in the launch of the Endurance, our growth prospects could be adversely affected. In addition, it could diminish the “first mover” advantage we aim to attain, prevent us from gaining the confidence of potential customers and open the door to increased competition. Furthermore, we rely on third-party suppliers for the provision and development of many of the key components and materials used in our vehicles. To the extent our suppliers experience any delays in providing us with or developing necessary components, or we need to find alternative sources or develop our own components, whether due to COVID-19 or other reasons, we could experience delays in meeting our projected timelines.

Further, we have no experience to date in high volume manufacturing of our vehicles. Even if we are successful in developing our high volume manufacturing capability and processes and in reliably sourcing our component supply, we cannot assure that we will be able to do so in a manner that avoids significant delays

19

Table of Contents

and cost overruns, including as a result of factors beyond our control such as problems with suppliers and vendors, or in time to meet our vehicle commercialization schedules or in satisfaction of the requirements of customers.

We will initially depend on revenue generated from a single model and in the foreseeable future will be significantly dependent on a limited number of models.

We will initially depend on revenue generated from a single vehicle model and in the foreseeable future will be significantly dependent on a single or limited number of models. Historically, automobile customers have come to expect a variety of vehicle models offered in a manufacturer’s fleet and new and improved vehicle models to be introduced frequently. Given that for the foreseeable future our business will depend on a single or limited number of models, to the extent a particular model is not well- received by the market, our sales volume, business, prospects, financial condition and operating results could be materially and adversely affected.

If our vehicles fail to perform as expected, our ability to develop, market and sell or lease our electric vehicles could be harmed.

As a new entrant to the industry attempting to build brand recognition and establish relationships with commercial fleets and fleet managers, it is very important that our vehicles and our service and support meet the expectations of our customers when we commence production and sales. If our vehicles were to contain defects in design and/or manufacture that cause them not to perform as expected or that require repair, our ability to develop, market and sell or lease our vehicles could be harmed. We currently have a limited frame of reference by which to evaluate the long-term quality, reliability and performance characteristics of our trucks, battery packs and other products. There can be no assurance that we will be able to detect and repair any defects in our products before commencing the sale of our vehicles. In addition, the operation of our vehicles will be highly dependent on software that will require modification and updates over time. Software products are inherently complex and often contain defects and errors when first introduced. Any product defects or any other failure of our vehicles to perform as expected, including during testing or with respect to our initial deliveries to customers, could harm our reputation and result in adverse publicity, lost revenue, delivery delays, product recalls, product liability claims or significant warranty and other expenses, and could have a material adverse impact on our business, financial condition, operating results and prospects. Until we are able build customer relationships and earn trust, any of these effects could be particularly significant to us.

If we fail to scale our business operations or otherwise manage future growth effectively as we attempt to rapidly grow our company, we may not be able to produce, market, service and sell or lease our vehicles successfully.

Any failure to manage our growth effectively could materially and adversely affect our business, prospects, operating results or financial condition. We plan to commence limited commercial production of the Endurance at the Lordstown Complex in September 2021 and are targeting significant growth thereafter. We also intend to leverage our technologies to develop additional all-electric vehicles geared for the commercial market that will require us to commit additional resources and management attention. Our future operating results depend to a large extent on our ability to manage our expansion and growth successfully. However, we have no experience to date in high volume manufacturing of our vehicles. We cannot assure that we will be able to develop efficient, automated, low-cost manufacturing capabilities and processes, and reliable sources of component supply, that will enable us to meet the quality, price, engineering, design and production standards, as well as the production volumes, required to successfully market our vehicles. Any failure to develop such manufacturing processes and capabilities within our projected costs and timelines could stunt our future growth and impair our ability to produce, market, service and sell or lease our vehicles successfully.

20

Table of Contents

We may not be able to accurately estimate the supply and demand for our vehicles, which could result in a variety of inefficiencies in our business and hinder our ability to generate revenue. If we fail to accurately predict our manufacturing requirements, we could incur additional costs or experience delays.

It is difficult to predict our future revenues and appropriately budget for our expenses, and we may have limited insight into trends that may emerge and affect our business. Since inception, we have already revised our production capacity plans to address what we believe to be a significant increase in interest, which has increased our ramp up costs and impacted research and development needs. We have been and will continue to be required to provide forecasts of our demand to our suppliers several months prior to the scheduled delivery of products to our prospective customers. Currently, there is no historical basis for making judgments on the demand for our vehicles or our ability to develop, manufacture and deliver vehicles, or on our profitability in the future. If we overestimate our requirements, our suppliers may have excess inventory, which indirectly would increase our costs. If we underestimate our requirements, our suppliers may have inadequate inventory, which could interrupt manufacturing of our products and result in delays in shipments and revenues. In addition, lead times for materials and components that our suppliers order may vary significantly and depend on factors such as the specific supplier, contract terms, widespread supply shortages and demand for each component at a given time. If we fail to order sufficient quantities of product components in a timely manner, the delivery of vehicles to our customers could be delayed, which would harm our business, financial condition and operating results.

Our future growth is dependent upon the willingness of operators of commercial vehicle fleets to adopt electric vehicles and upon our ability to produce, sell and service vehicles that meet their needs. If the market for commercial electric vehicles does not develop as we expect, or if it develops slower than we expect, our business, prospects, financial condition and operating results will be adversely affected.

Our growth is dependent upon the adoption of electric vehicles by operators of commercial vehicle fleets and on our ability to produce, sell and service vehicles that meet their needs. The entry of commercial electric pickup trucks and vehicles into the medium-duty commercial vehicle market is a relatively new development, particularly in the United States, and is characterized by rapidly changing technologies and evolving government regulation, industry standards and customer views of the merits of using electric vehicles in their businesses. This process has been slow to date. As part of our sales efforts, we must educate fleet managers as to the economical savings during the life of the vehicle and the lower “total cost of ownership” of our vehicles. As such, we believe that operators of commercial vehicle fleets will consider many factors when deciding whether to purchase our commercial electric vehicles (or commercial electric vehicles generally) or vehicles powered by internal combustion engines, particularly diesel-fueled or natural gas-fueled vehicles. We believe these factors include:

21

Table of Contents

If, in weighing these factors, operators of commercial vehicle fleets determine that there is not a compelling business justification for purchasing commercial electric vehicles, particularly those that we will produce and sell, then the market for commercial electric vehicles may not develop as we expect or may develop more slowly than we expect, which would adversely affect our business, prospects, financial condition and operating results.

In addition, any reduction, elimination or selective application of tax and other governmental incentives and subsidies because of policy changes, the reduced need for such subsidies and incentives due to the perceived success of the electric vehicle, fiscal tightening or other reasons may result in the diminished competitiveness of the electric vehicle industry generally or our electric vehicles in particular, which would adversely affect our business, prospects, financial condition and operating results. Further, we cannot assure that the current governmental incentives and subsidies available for purchasers of electric vehicles will remain available.

If we are unable to address the service requirements of our future customers or if there is inadequate access to charging stations, our business will be materially and adversely affected.

Demand for the Endurance will depend in part on the availability of service providers and charging infrastructure. Servicing electric vehicles is different than servicing internal combustion engine or hybrid vehicles and requires specialized skills, including high voltage training and servicing techniques. As the Endurance is not in production yet, we do not have experience servicing the Endurance. The Endurance also will require the use of charging stations to recharge its batteries. While the prevalence of charging stations has been increasing, charging station locations are significantly less widespread than gas stations. We plan to have our own service centers and also expect to partner with third-party service providers to maintain and repair the Endurance. We plan to partner with third-party electric vehicle station providers to offer installation of charging stations to our customers. We have limited arrangements in place with such third parties to date and will need to establish a network that provides sufficient availability and convenience to attract customers and convert interest in our vehicles into sales. Some potential customers may choose not to purchase the Endurance because of the lack of a more widespread service network or charging infrastructure at the time of sale. If we are unable to satisfactorily service our future customers or provide seamless access to charging infrastructure, our ability to generate customer loyalty, grow our business and sell Endurance could be impaired.

We may be unable to adequately control the costs or maintain adequate supply of components and raw materials associated with our operations.

We may be unable to adequately control the costs associated with our operations. We expect to incur significant costs related to procuring raw materials required to manufacture and assemble our vehicles. The prices for and availability of these raw materials fluctuate depending on factors beyond our control. Our business also depends on the continued supply of battery cells for our vehicles. We are exposed to multiple risks relating to availability and pricing of quality lithium-ion battery cells. In addition, a global semiconductor

22

Table of Contents

supply shortage is having wide-ranging effects across the automotive industry and may negatively impact the supply needed for our testing and production timeline.

Furthermore, currency fluctuations, tariffs or shortages in petroleum, steel and aluminum or other raw materials and other economic or political conditions have resulted and may continue to result in significant increases in freight charges and raw material costs, delays in obtaining critical materials or changes in the specifications for those materials. Substantial increases in the prices for our raw materials or components would increase our operating costs, and could reduce our margins. In addition, a growth in popularity of electric vehicles without a significant expansion in battery cell production capacity or sufficient availability of semiconductors could result in shortages, which would increase our cost of materials or impact our prospects. These factors could also delay our overall production timeline.

We depend upon key personnel and will need to hire and train additional personnel.

​

Our success depends on the continuing services of key employees. We believe the depth and quality of the experience of our management team in the automotive and electric vehicle markets is a key to our ability to be successful. The loss of any of these individuals could have a material and adverse effect on our business operations. Additionally, the success of our operations will largely depend upon our ability to successfully attract and maintain competent and qualified key management personnel. As with any company with limited resources, there can be no guarantee that we will be able to attract such individuals or that the presence of such individuals will necessarily translate into our profitability. Because we operate in a newly emerging industry, there may also be limited personnel available with relevant business experience and such individuals may be subject to non-competition and other agreements that restrict their ability to work for us. The challenge will be exacerbated for us as we attempt to transition from start-up to full-scale commercial vehicle manufacturing and sales in a very short period of time under the unforeseeable business conditions which continue to evolve as a result of the impact of COVID-19. Our inability to attract and retain key personnel may materially and adversely affect our business operations. Any failure by our management to effectively anticipate, implement and manage the changes required to sustain our growth would have a material adverse effect on our business, financial condition and results of operations.

We will also need to hire and train a significant number of employees to engage in full-scale commercial manufacturing operations. This needs to be accomplished in a very short period of time in order for us to commence commercial production and sales in the second half of 2021 as targeted. There are various risks and challenges associated with hiring, training and managing a large workforce, and these risks and challenges will be exacerbated by the short period of time in which we intend to scale up our workforce. Although the area surrounding the Lordstown Complex is home to a highly trained workforce with experience working in the Lordstown Complex and manufacturing vehicles, this workforce does not have experience with electric vehicle manufacturing and many jobs will require significant training. Furthermore, in the event employees hired by us seek to join or form a labor union, we could be subject to risks as we engage in and attempt to finalize negotiations with any such union, including potential work slowdowns or stoppages, delays and increased costs. If we are unsuccessful in hiring and training a workforce in a timely and cost-effective manner, our business, financial condition and results of operations could be adversely affected.

We are highly dependent on the services of Stephen S. Burns, our Chairman of the Board and Chief Executive Officer.

We are highly dependent on the services of Stephen S. Burns, our Chairman of the Board and Chief Executive Officer, and our largest stockholder. Mr. Burns is our founder and a significant influence on and driver of our business plan. If Mr. Burns were to discontinue his service to us due to death, disability or any other reason, we would be significantly disadvantaged.

We face intense competition and associated risks, including that we may not be the first to market with an electric pickup truck. Many of our competitors have significantly greater financial or other

23

Table of Contents

resources, longer operating histories and greater name recognition than we do and one or more of these competitors could use their greater resources and/or name recognition to gain market share at our expense or could make it very difficult for us to establish significant market share.

We face intense competition in our industry, which we may be unable to manage, including the risk that we may not be the first to market with an electric pickup truck. Established OEMs and new entrants to the industry have announced their intent and timelines to compete in the electric pickup truck market. In addition, established OEMs currently offer alternative fuel and hybrid medium-duty pickup trucks to the commercial fleet market, which includes government fleets. In the electric medium-duty pickup truck market in the United States, at least initially, we believe we will compete with few other manufacturers and will have fairly limited competition in the commercial fleet electric pickup truck category. However, if fleet operators begin transitioning to electric vehicles on a mass scale, which will be necessary for us to be successful, we expect that more competitors will enter the market and competition will become intense. Certain potential competitors, for example, have more significant financial resources, established market positions, long-standing relationships with customers and dealers who have more resources available to develop new products and introduce them into the marketplace than are currently available to us. As a result, our competitors may be able to compete more aggressively and sustain that competition over a longer period of time than we may be able to. This expected competition places significant pressure on our ability to achieve our goals of completing the development of the Endurance, retooling of the Lordstown Complex and commencing commercial production and sales in the near term. If we are unable to do this successfully and leverage a “first mover” advantage to build strong customer relationships, we may not be able to compete successfully. This intense competitive environment may require us to make changes to our products, pricing, licensing, services, distribution or marketing to develop a market position, any of which could have an adverse effect on our financial condition, results of operations or prospects.

We may not succeed in establishing, maintaining and strengthening our brand, which would materially and adversely affect customer acceptance of our vehicles and components and our business, revenues and prospects.

Our business and prospects heavily depend on our ability to develop, maintain and strengthen our brand. If we are not able to establish, maintain and strengthen our brand, we may lose the opportunity to build a critical mass of customers. Our ability to develop, maintain and strengthen our brand will depend heavily on the success of our marketing efforts. The automobile industry is intensely competitive, and we may not be successful in building, maintaining and strengthening our brand. Our current and potential competitors, particularly automobile manufacturers headquartered in the United States, Japan, the European Union and China, have greater name recognition, broader customer relationships and substantially greater marketing resources than we do. If we do not develop and maintain a strong brand, our business, prospects, financial condition and operating results will be materially and adversely impacted.

Our electric vehicles will compete for market share with vehicles powered by other vehicle technologies that may prove to be more attractive than our vehicle technologies.

Our target market currently is serviced by manufacturers with existing customers and suppliers using proven and widely accepted fuel technologies. Additionally, our competitors are working on developing technologies that may be introduced in our target market. If any of these alternative technology vehicles can provide lower fuel costs, greater efficiencies, greater reliability or otherwise benefit from other factors resulting in an overall lower total cost of ownership, this may negatively affect the commercial success of our vehicles or make our vehicles uncompetitive or obsolete.

We may be unable to keep up with changes in electric vehicle technology as new entrants and existing, larger manufacturers enter the electric vehicle space.

The Endurance is being designed for use with, and is dependent upon, existing electric vehicle technology. As new companies and larger, existing vehicle manufacturers enter the electric vehicle space, we may lose any technological advantage we may have had in the marketplace and suffer a decline in our

24

Table of Contents

position in the market. As technologies change, we will attempt to upgrade or adapt our products to continue to provide products with the latest technology. However, our products may become obsolete or our research and development efforts may not be sufficient to adapt to changes in or to create the necessary technology to effectively compete. As a result, our potential inability to adapt to and develop the necessary technology may harm our competitive position.

We will not have a third-party retail product distribution network.

Third-party dealer networks are the traditional method of vehicle sales distribution. Because we plan to sell directly to commercial fleet managers, we will not have a traditional dealer product distribution network. Our building an in-house sales and marketing function may be expensive and time- consuming. If the lack of a traditional dealer product distribution network results in lost opportunities to generate sales, it could limit our ability to grow. If our use of an in-house sales and marketing team is not effective, our results of operations and financial conditions could be adversely affected.

If we are unable to establish and maintain confidence in our long-term business prospects among commercial fleet operators, analysts and others within our industry, then our financial condition, operating results and business prospects may suffer materially.

Commercial fleet operators may be less likely to purchase our products now if they are not convinced that our business will succeed or that our operations will continue for many years. Similarly, suppliers and other third parties will be less likely to invest time and resources in developing business relationships with us if they are not convinced that our business will succeed. Accordingly, to build, maintain and grow our business, we must maintain confidence among commercial fleet operators, suppliers, analysts and other parties with respect to our liquidity and long-term business prospects.

Maintaining such confidence may be particularly complicated by certain factors, such as our limited operating history, others’ unfamiliarity with our products, competition and uncertainty regarding the future of electric vehicles. Many of these factors are largely outside our control, and any negative perceptions about our long-term business prospects, even if exaggerated or unfounded, would likely harm our business and make it more difficult to raise additional capital in the future.

There are complex software and technology systems that need to be developed in coordination with vendors and suppliers in order to reach production for our electric vehicles, and there can be no assurance such systems will be successfully developed.

Our vehicles will use a substantial amount of third-party and in-house software codes and complex hardware to operate. The development of such advanced technologies are inherently complex, and we will need to coordinate with our vendors and suppliers in order to reach production for our electric vehicles. Defects and errors may be revealed over time and our control over the performance of third-party services and systems may be limited. Thus, our potential inability to develop the necessary software and technology systems may harm our competitive position.

We are relying on third-party suppliers to develop a number of emerging technologies for use in our products, including lithium-ion battery technology. These technologies are not today, and may not ever be, commercially viable. There can be no assurances that our suppliers will be able to meet the technological requirements, production timing and volume requirements to support our business plan. In addition, the technology may not comply with the cost, performance useful life and warranty characteristics we anticipate in our business plan. As a result, our business plan could be significantly impacted and we may incur significant liabilities under warranty claims which could adversely affect our business, prospects and results of operations.

25

Table of Contents

Our success may be dependent on our development and protection of intellectual property rights.

We rely on confidentiality and trade secret protections to protect our proprietary technology. All new developments by us will be owned by us. Our success will, in part, depend on our ability to obtain patents and trademarks and protect our trade secrets and proprietary technology. We are currently maintaining our engineering under confidentiality agreements and other agreements to preserve our trade secrets and other proprietary technology. We have filed several trademark applications with the United States Patent and Trademark Office but have not received any federal registrations of any applications as of the date of filing of this report. Although we have entered into confidentiality agreements with our employees, consultants and contractors, our agreements may not adequately protect our intellectual property, particularly with respect to conflicts of ownership relating to work product generated by our employees, consultants and contractors, and we cannot be certain that others will not gain access to our trade secrets and other proprietary technology. See “Legal Proceedings.” Others may independently develop substantially equivalent proprietary information and techniques or otherwise gain access to our trade secrets.

Risks Relating to Regulation and Claims

​

We face risks and uncertainties related to litigation, regulatory actions and government investigations and inquiries.

​

We have in the past been and may in the future be subject to, or become a party to, litigation, regulatory actions, and government investigations and inquiries. For example, on February 17, 2021, we received a request from the SEC for the voluntary production of documents and information, including relating to the merger between DiamondPeak and Legacy Lordstown and pre-orders of vehicles.  We are responding to the SEC’s requests and intend to cooperate with its inquiry. Additionally, on March 18 and 19, 2021, two related putative class action lawsuits were filed against us and certain of our officers in the U.S. District Court for the Northern District of Ohio (Case Nos. 21-cv-616 and 21-cv-633), asserting violations of federal securities laws under Section 10(b) and Section 20(a) of the Exchange Act. We expect these actions will be consolidated, and we intend to vigorously defend against the claims, but there can be no assurances as to the outcome. In addition, from time to time, we may also be involved in legal proceedings and investigations arising in the ordinary course of business, including those relating to employment matters, relationships with collaboration partners, intellectual property disputes, and other business matters. Any such lawsuits, claims, or investigations may be time-consuming, costly, divert management resources, or otherwise have a material adverse effect on our business or result of operations.

​

Product liability or other claims could have a material adverse effect on our business.

The risk of product liability claims, product recalls and associated adverse publicity is inherent in the manufacturing, marketing and sale of all vehicles, including electric vehicles. Although we have liability insurance policies in place, that insurance may be inadequate to cover all potential product claims. Any product recall or lawsuit seeking significant monetary damages either in excess of our coverage, or outside of our coverage, may have a material adverse effect on our business and financial condition. We may not be able to secure additional liability insurance coverage on acceptable terms or at reasonable costs when needed or at all. A successful product liability claim against us could require us to pay a substantial monetary award. Moreover, a product recall could generate substantial negative publicity about our products and business and inhibit or prevent commercialization of other future product candidates. We cannot provide assurance that such claims and/or recalls will not be made in the future.

The acquisition of the Lordstown Complex required us to accept all environmental responsibility for the real property.

The Asset Transfer Agreement between us and GM, pursuant to which we acquired the Lordstown Complex, required us to accept the condition of the real property in “as is — where is” condition, including accepting all environmental conditions. The Lordstown Complex and all of its facilities and real property

26

Table of Contents

present environmental risk, both known and unknown. Prior to entering into the Asset Transfer Agreement, GM completed an investigation and remediation project pursuant to an AOC under the U.S. EPA’s RCRA Corrective Action Program. As part of the U.S. EPA’s approval of GM’s investigation and remediation project, GM placed an environmental covenant on the real property, which requires, among other things, (i) the maintenance of nominal financial assurance, (ii) the limitation of the real property to commercial/industrial use, (iii) the prohibition of groundwater for potable use, (iv) the implementation of a dust control plan and (v) and the maintenance of impermeable surfaces on certain areas of the real property. We assumed these responsibilities under the environmental covenant as a condition to the consummation of the transactions contemplated by the Asset Transfer Agreement. In addition, to further manage potential environmental risk, we have secured environmental liability insurance coverage as required under the Asset Transfer Agreement. Finally, to mitigate the risk associated with the Ohio EPA’s authority to require future remediation activities at the Lordstown Complex, related to historic environmental conditions, we have entered into an Administrative Order with the Ohio EPA wherein the Ohio EPA agreed to not pursue enforcement actions against us for historic environmental conditions at the Lordstown Complex site provided that we comply with the terms of the environmental covenant. Notwithstanding the efforts that we have taken to mitigate environmental risk, there is no assurance that claims, lawsuits, fines or penalties will not arise. Our assumption of environmental liabilities at the Lordstown Complex could expose us to potential costs and liabilities that could exceed or fall outside of our available insurance coverage and adversely impact our financial condition.

Regulatory requirements may have a negative effect upon our business.

All vehicles sold must comply with international, federal and state motor vehicle safety standards. In the United States, vehicles that meet or exceed all federally mandated safety standards are certified under the federal regulations. Rigorous testing and the use of approved materials and equipment are among the requirements for achieving federal certification. The Endurance will be subject to substantial regulation under federal, state and local laws and standards. These regulations include those promulgated by the U.S. EPA, the CARB, the NHTSA, the PHMSA and various state boards, and compliance certification is required for each new model year. These laws and standards are subject to change from time to time and we could become subject to additional regulations in the future. In addition, federal, state and local laws and industrial standards for electric vehicles are still developing. Compliance with these regulations, including obtaining necessary approvals, could be challenging, burdensome, time-consuming and expensive. If compliance and obtaining approvals results in delays or substantial expenses, our business could be adversely affected.

We may be exposed to liability for infringing upon other companies’ intellectual property rights.

Our success will, in part, depend on our ability to operate without infringing on others’ proprietary rights. Although we are starting with a new design and development and are relying on the licensed rights from Elaphe, and while we are not aware of any patents and trademarks which would cause our products or their use to infringe the rights of any third parties, we cannot be certain that infringement has not or will not occur. We could incur substantial costs, in addition to a great amount of time lost, in defending any patent, trademark or other intellectual property infringement suits or in asserting any patent, trademark or other intellectual property rights in a suit with another party. See “Legal Proceedings.”

Changes in laws or regulations, or a failure to comply with any laws and regulations, or any litigation that we may be subject to or involved in may adversely affect our business, investments and results of operations.

We are subject to laws, regulations and rules enacted by national, regional and local governments and the Nasdaq Global Select Market on which our securities are listed. In particular, we are required to comply with certain SEC, Nasdaq and other legal and regulatory requirements. Compliance with, and monitoring of, applicable laws, regulations and rules may be difficult, time-consuming and costly.

Those laws, regulations and rules and their interpretation and application may also change from time to time and those changes could have a material adverse effect on our business, investments and results of

27

Table of Contents

operations. For example, it is difficult to predict what impact, if any, changes in federal laws and policies, including those relating to tax, environmental, labor and employment, as a result of recent U.S. federal elections will have on our business and industry, the economy as a whole, consumer confidence and discretionary spending. A failure to comply with applicable laws, regulations or rules, as interpreted and applied, could have a material adverse effect on our business and results of operations.

We are or may be subject to lawsuits, administrative proceedings and claims that arise in the regular course of business. These matters may involve claims by customers, suppliers, vendors, contractors, competitors, government agencies, stockholders or other parties regarding our products, development and advertising, as well as contract disputes and intellectual property infringement matters, among other matters. We are also subject to employee claims against us based on, among other things, discrimination, harassment, wrongful termination, disability or violation of wage and labor laws. These claims may divert our financial and management resources that would otherwise be used to benefit our operations. The ongoing expense of any resulting lawsuits, and any substantial settlement payment by us or damage award enforceable against us, could adversely affect our business and results of operations. Significant legal fees and costs in complex class action litigation or an adverse judgment or settlement that is not insured or is in excess of insurance coverage could have a material adverse effect on our financial position and results of operations.

The Endurance will make use of lithium-ion battery cells, which, if not appropriately managed and controlled, have been observed to catch fire or vent smoke and flames. If such events occur in the Endurance, we could face liability for damage or injury, adverse publicity and a potential safety recall, any of which could adversely affect our business, prospects, financial condition and operating results.

The battery packs in the Endurance will use lithium-ion cells, which have been used for years in laptop computers and cell phones. On rare occasions, if not appropriately managed and controlled, lithium-ion cells can rapidly release the energy they contain by venting smoke and flames in a manner that can ignite nearby materials. This has occurred in our testing as we refine our software and other systems. Although we believe we can appropriately control this risk in our commercial vehicles for sale, there can be no assurance we will be able to entirely eliminate the risk. We could face liability for damage or injury, adverse publicity and a potential safety recall, any of which could adversely affect our business, prospects, financial condition and operating results. To limit any losses associated with such event, we will carry commercial general liability, commercial automobile liability and umbrella insurance, which may not be adequate to ensure against all losses.

We may be exposed to delays, limitations and risks related to the environmental permits and other operating permits required to operate the Lordstown Complex.

Operation of an automobile manufacturing facility requires land use and environmental permits and other operating permits from federal, state and local government entities. While we have all permits necessary to carry out and perform our current plans and operations at the Lordstown Complex, we are in the process of applying for and securing the environmental, wastewater and land use permits necessary for the commercial operation of the Lordstown Complex. Delays, denials or restrictions on any of the applications for or assignment of the permits to operate the Lordstown Complex could adversely affect our ability to execute on our business plans and objectives.

We may face legal challenges in one or more states in our attempting to sell directly to customers that could adversely affect our costs.

Our business plan includes the direct sale of vehicles to commercial fleet operators, and potentially, to retail consumers. The laws governing licensing of dealers and sales of motor vehicles vary from state to state. Most states require a dealer license to sell new motor vehicles within the state, and many states prohibit manufacturers from being a licensed dealer and directly selling new motor vehicles to retail consumers. We recently became a licensed dealer in California and anticipate that we may become a licensed dealer in additional states.

28

Table of Contents

We may face legal challenges to this distribution model. For instance, in states where direct sales are not permitted, dealers and their lobbying organizations may complain to the government or regulatory agencies that we are acting in the capacity of a dealer without a license. In some states, regulators may restrict or prohibit us from directly providing warranty repair service, or from contracting with third parties who are not licensed dealers to provide warranty repair service. Because the laws vary from state to state, our distribution model must be carefully established and the sales and service process must be continually monitored for compliance with the various state requirements, which change from time to time. Regulatory compliance and likely challenges to the distribution model will add to the cost of our business.

We may be compelled to undertake product recalls or take other actions, which could adversely affect our business, prospects, operating results, reputation and financial condition.

Any product recall in the future may result in adverse publicity, damage our reputation and adversely affect our business, prospects, operating results and financial condition. In the future, we may, voluntarily or involuntarily, initiate a recall if any of our electric vehicles or components (including our battery cells) prove to be defective or noncompliant with applicable federal motor vehicle safety standards. Such recalls, whether caused by systems or components engineered or manufactured by us or our suppliers, would involve significant expense and diversion of management’s attention and other resources, which could adversely affect our brand image in our target market and our business, prospects, financial condition and operating results.

Insufficient warranty reserves to cover future warranty claims could adversely affect our business, prospects, financial condition and operating results.

Once our electric pickup trucks are in production, we will need to maintain warranty reserves to cover any warranty-related claims. If our warranty reserves are inadequate to cover such future warranty claims, our business, prospects, financial condition and operating results could be materially and adversely affected. We may become subject to significant and unexpected warranty expenses. There can be no assurances that then-existing warranty reserves will be sufficient to cover all claims.

We intend to collect and process certain information about our customers and will be subject to various privacy and data protection laws.

We intend to collect and process certain information about our customers, in accordance with applicable law and our own privacy policies. Any failure by us to comply with our privacy policy or any federal, state or international privacy, data protection or security laws or regulations could result in regulatory or litigation-related actions against us, legal liability, fines, damages and other costs. A failure by any of our vendors or business partners to comply with contractual or legal obligations regarding the protection of information about our customers could carry similar consequences. Should we become subject to additional privacy or data protection laws, we may need to undertake compliance efforts that could carry a large cost. Although we take steps to protect the security of our customers’ personal information, we may be required to expend significant resources to comply with data security incident notification requirements if a third party accesses or acquires the personal information of our customers without authorization or if we otherwise experience a data security incident or loss of customers’ personal information. A major breach of our network security and systems could have negative effects on our business and future prospects, including possible fines, penalties and damages, and could result in reduced demand for our vehicles and harm to our reputation and brand. Such a breach could also compromise or lead to a loss of protection of our intellectual property or trade secrets.

Interruption or failure of, or unauthorized access to, our or the Endurance’s information technology and communications systems could adversely affect our operating results and reputation.

We are currently developing information technology and communications systems to assist us in the management of our business. The production of our vehicles will require the development, maintenance and

29

Table of Contents

improvement of information technology and communications systems in the United States, which will include product data management, procurement, inventory management, production planning and execution, sales, service and logistics, financial, tax and regulatory compliance systems. The availability and effectiveness of operating our business will depend on these systems.

In addition, software, information technology and communications systems will be integral to the operation and functionality of the Endurance. The Endurance will be designed with built-in data connectivity to accept and install periodic remote updates to improve or update its functionality. Although these systems will be designed and tested for resiliency and security, they involve complex technologies and we cannot be certain they will be entirely free from vulnerabilities.

As a result, all of these systems may be vulnerable to damage or interruption from, among other things, data breaches, cyber-attacks, fire, natural disasters, power loss, telecommunications failures, computer viruses and other attempts to harm our systems or the operation of Endurance vehicles. We cannot be certain that these systems or their required functionality will be effectively and timely developed, implemented and maintained, and any disaster recovery planning cannot account for all eventualities. Any compromise of our proprietary information or of our systems or those of the Endurance could adversely affect our reputation and could result in lengthy interruptions to our ability to operate our business and our customers’ ability to operate the Endurance.

General Risk Factors

​

Our insurance strategy may not be adequate to protect us from all business risks.

In the ordinary course of business, we may be subject to losses resulting from products liability, accidents, acts of God and other claims against us, for which we may have no insurance coverage. While we currently carry commercial general liability, commercial automobile liability, excess liability, workers’ compensation, cyber security and directors’ and officers’ insurance policies, we may not maintain as much insurance coverage as other OEMs do, and in some cases, we may not maintain any at all.

Additionally, the policies that we do have may include significant deductibles, and we cannot be certain that our insurance coverage will be sufficient to cover all future claims against us. A loss that is uninsured or exceeds policy limits may require us to pay substantial amounts, which could adversely affect our financial condition and operating results.

Our facility could be damaged or adversely affected as a result of disasters or other unpredictable events. Any prolonged disruption in the operations of our facility would adversely affect our business, prospects, financial condition and operating results.

We plan to assemble our electric vehicles at a single facility, the Lordstown Complex. Any prolonged disruption of operations at the Lordstown Complex, whether due to technical, information systems, communication networks, strikes, accidents, weather conditions or other natural disaster, the COVID-19 pandemic or otherwise, whether short- or long-term, would adversely affect our business, prospects, financial condition and operating results.

We are or may be subject to risks associated with strategic alliances or acquisitions.

We may from time to time consider entering into strategic alliances, including joint ventures, minority equity investments or other transactions with various third parties to further our business purpose. These alliances could subject us to a number of risks, including risks associated with sharing proprietary information, with non-performance by the third party and with increased expenses in establishing new strategic alliances, any of which may materially and adversely affect our business. We may have limited ability to monitor or control the actions of these third parties and, to the extent any of these strategic third parties suffers negative

30

Table of Contents

publicity or harm to its reputation from events relating to its business, we may also suffer negative publicity or harm to our reputation by virtue of our association with any such third party.

When appropriate opportunities arise, we may acquire additional assets, products, technologies or businesses that are complementary to our existing business. In addition to possible stockholder approval, we may need approvals and licenses from relevant government authorities for the acquisitions and to comply with any applicable laws and regulations, which could result in increased delay and costs, and may disrupt our business strategy if we fail to do so. Furthermore, acquisitions and the subsequent integration of new assets and businesses into our own require significant attention from our management and could result in a diversion of resources from our existing business, which in turn could have an adverse effect on our operations. Acquired assets or businesses may not generate the financial results we expect. Acquisitions could result in the use of substantial amounts of cash, potentially dilutive issuances of equity securities, the occurrence of significant goodwill impairment charges, amortization expenses for other intangible assets and exposure to potential unknown liabilities of an acquired business. Moreover, the costs of identifying and consummating acquisitions may be significant.

We will incur significant increased expenses and administrative burdens as a public company, which could have a material adverse effect on our business, financial condition and results of operations.

We face increased legal, accounting, administrative and other costs and expenses as a public company that Legacy Lordstown did not incur as a private company. The Sarbanes-Oxley Act, including the requirements of Section 404, as well as rules and regulations subsequently implemented by the SEC, the Dodd-Frank Wall Street Reform and Consumer Protection Act of 2010 and the rules and regulations promulgated and to be promulgated thereunder, the Public Company Accounting Oversight Board and the securities exchanges impose additional reporting and other obligations on public companies. Compliance with public company requirements will increase costs and make certain activities more time-consuming. A number of those requirements will require us to carry out activities that Legacy Lordstown had not done previously. In addition, additional expenses associated with SEC reporting requirements will be incurred. Furthermore, if any issues in complying with those requirements are identified (for example, if our auditors identify a material weakness or significant deficiency in the internal control over financial reporting), we could incur additional costs rectifying those issues, and the existence of those issues could adversely affect our reputation or investor perceptions of us. It is also more expensive to obtain directors’ and officers’ liability insurance. Risks associated with our status as a public company may make it more difficult to attract and retain qualified persons to serve on our board of directors or as executive officers. The additional reporting and other obligations imposed by these rules and regulations increase legal and financial compliance costs and the costs of related legal, accounting and administrative activities. These increased costs will require us to divert a significant amount of money that could otherwise be used to expand our business and achieve strategic objectives. Advocacy efforts by stockholders and third parties may also prompt additional changes in governance and reporting requirements, which could further increase our costs.

Our management may not successfully or effectively manage our transition to a public company.

Our management team may not successfully or effectively manage our transition to a public company, which transition subjects us to significant regulatory oversight and reporting obligations under federal securities laws. Its limited experience in dealing with the increasingly complex laws pertaining to public companies could be a significant disadvantage in that it is likely that an increasing amount of management's time may be devoted to these activities which will result in less time being devoted to our management and growth. We may not have adequate personnel with the appropriate level of knowledge, experience and training in the accounting policies, practices or internal controls over financial reporting required of public companies in the United States. The development and implementation of the standards and controls necessary for us to achieve the level of accounting standards required of a public company in the United States may require costs greater than expected. It is possible that we will be required to expand our

31

Table of Contents

employee base and hire additional employees to support our operations as a public company which will increase our operating costs in future periods.

Risks Related to Our Securities and Being a Public Company

​

Stephen S. Burns has significant influence over us and the concentration of ownership among our current executive officers, directors and their affiliates may prevent new investors from influencing significant corporate decisions.

As of March 1, 2021, Stephen S. Burns beneficially owned Class A common stock representing approximately 26.3% of our outstanding voting power. As long as Mr. Burns owns or controls a significant percentage of our outstanding voting power, he will have the ability to influence certain corporate actions requiring stockholder approval.

As of March 1, 2021, our directors and executive officers as a group (including Stephen S. Burns) beneficially owned approximately 29.7% of our outstanding Class A common stock. As a result, these stockholders will be able to exercise a significant level of control over all matters requiring stockholder approval, including the election of directors, any amendment of our second amended and restated certificate of incorporation (the “Charter”) and the approval of significant corporate transactions. This control could have the effect of delaying or preventing a change of control or changes in management and would make the approval of certain transactions difficult or impossible without the support of these significant stockholders.

Sales of a substantial number of shares of our securities in the public market could cause the market price of our Class A common stock to drop significantly, even if our business is doing well.

Sales of a substantial number of shares of Class A common stock in the public market could occur at any time, including sales pursuant to a resale prospectus covering shares issued in the Business Combination and registered pursuant to the Registration Rights and Lock-up Agreement (defined below). These sales, or the perception in the market that the holders of a large number of shares intend to sell shares, could reduce the market price of our Class A common stock and could impair our ability to raise capital through the sale of additional equity securities. We are unable to predict the effect that sales may have on the prevailing market price of our Class A common stock.

As of March 1, 2021, we had outstanding 176,579,376 shares of our Class A common stock and Warrants to purchase 3,956,116 shares of our Class A common stock. The exercise price of the BGL Warrants is $10.00 per share and of the Private Placement Warrants is $11.50 per share. To the extent such Warrants are exercised, additional shares of our Class A common stock will be issued, which will result in dilution to the holders of our Class A common stock and will increase the number of shares eligible for resale in the public market. In addition, as of March 1, 2021, an aggregate of 17,785,580 shares of Class A common stock are subject to outstanding awards or available for future issuance under the 2020 Equity Incentive Plan (the “2020 Plan”). Sales, or the potential sales, of substantial numbers of shares in the public market, subject to certain restrictions on transfer until the termination of applicable lock-up periods, could increase the volatility of the market price of our Class A common stock or adversely affect the market price of our Class A common stock.

The Registration Rights and Lock-up Agreement (the “Registration Rights and Lock-up Agreement”) that we entered into effective as of the Closing of the Business Combination provides that certain of our securities held by the parties to such agreement are locked-up as follows: (i) any shares of Class A common stock held by the Sponsor (or its permitted transferees) will be locked-up until October 23, 2021, subject to certain exceptions based on the trading price of the Class A common stock described below, (ii) any shares of Class A common stock held by GM, Workhorse Group or BGL (which shares account for approximately 14.2% of the Class A common stock outstanding, assuming the full exercise of all outstanding Warrants as of March 1, 2021) will be locked-up until April 23, 2021 and (iii) any shares of Class A common stock held by

32

Table of Contents

Stephen S. Burns will be locked-up until October 23, 2021, and 50% of such shares will continue to be locked-up until October 23, 2022.

In addition, Stephen S. Burns agreed not to transfer any shares of Class A common stock held by him if, immediately following such transfer, the shares owned by him would be fewer than the number of shares that would be required to satisfy any outstanding indemnification claim made by us pursuant to the Business Combination Agreement.

The lock-up restrictions provided in the Registration Rights and Lock-up Agreement do not apply to our anchor investor, which will remain subject to the lock-up provisions set forth in the Subscription Agreements, which it entered into with DiamondPeak in connection with its investment, and provide that its Class A common stock received upon conversion of its Class B common stock will be locked-up until the earlier of (A) October 23, 2021 or (B) the date on which we complete a liquidation, merger, capital stock exchange, reorganization or other similar transaction that results in all of our stockholders having the right to exchange their shares of Class A common stock for cash, securities or other property.

In addition, each of the Sponsor (and its permitted transferees) and the anchor investor may transfer shares of Class A common stock owned by them if the volume weighted average share price of Class A common stock equals or exceeds $12.00 per share (as adjusted for stock splits, stock dividends, reorganizations, recapitalizations and similar transactions) for at least 20 out of 30 consecutive trading days and such 30 consecutive trading days fall after March 22, 2021.

Because we have no current plans to pay cash dividends on our Class A common stock for the foreseeable future, you may not receive any return on investment unless you sell your Class A common stock for a price greater than that which you paid for it.

We may retain future earnings, if any, for future operations, expansion and debt repayment and have no current plans to pay any cash dividends for the foreseeable future. Any decision to declare and pay dividends in the future will be made at the discretion of our board of directors and will depend on, among other things, our results of operations, financial condition, cash requirements, contractual restrictions and other factors that our board of directors may deem relevant. In addition, our ability to pay dividends may be limited by covenants of any existing and future outstanding indebtedness we incur. As a result, you may not receive any return on an investment in our Class A common stock unless you sell our Class A common stock for a price greater than that which you paid for it. See the section entitled “Market for Registrant’s Common Equity, Related Stockholder Matters, and Issuer Purchases of Equity Securities — Dividend Policy.”

Our stock price is volatile, and you may not be able to sell the shares of our Class A common stock at or above the price you paid.

The trading price of our Class A common stock is volatile and could be subject to wide fluctuations in response to various factors, some of which are beyond our control. These factors include:

33

Table of Contents

Broad market and industry factors may materially harm the market price of our securities irrespective of our operating performance. Trading of stock on a national securities exchange has experienced and is expected to continue to experience price and volume fluctuations that have often been unrelated or disproportionate to the operating performance of the particular companies affected. The trading prices and valuations of these stocks, and of our securities, may not be predictable. A loss of investor confidence in the market for the stocks of other companies which investors perceive to be similar to us could depress our stock price regardless of our business, prospects, financial conditions or results of operations. A decline in the market price of our securities also could adversely affect our ability to issue additional securities and our ability to obtain additional financing in the future.

In addition, in the past, securities class action litigation has often been commenced against companies following periods of volatility in the overall market or the market price of the particular company’s securities. This type of litigation, which has in the past been, and may in the future be, instituted against us, could result in substantial costs and a diversion of our management’s attention and resources. For example, on March 18 and 19, 2021, two related putative class action lawsuits were filed against us and certain of our officers in the U.S. District Court for the Northern District of Ohio (Case Nos. 21-cv-616 and 21-cv-633), asserting violations of federal securities laws under Section 10(b) and Section 20(a) of the Exchange Act. We expect these actions will be consolidated.  We intend to vigorously defend against the claims but there can be no assurances as to the outcome, and these securities class actions may result in substantial costs and/or diversion of management’s attention and resources.

​

The JOBS Act permits “emerging growth companies” like us to take advantage of certain exemptions from various reporting requirements applicable to other public companies that are not emerging growth companies.

We qualify as an “emerging growth company” as defined in Section 2(a)(19) of the Securities Act, as modified by the JOBS Act. As such, we take advantage of certain exemptions from various reporting requirements applicable to other public companies that are not emerging growth companies for as long as we continue to be an emerging growth company, including, but not limited to, (i) the exemption from the auditor attestation requirements with respect to internal control over financial reporting under Section 404 of the Sarbanes-Oxley Act, (ii) the exemptions from say-on-pay, say-on-frequency and say-on-golden parachute voting requirements and (iii) the exemption permitting reduced disclosure obligations regarding executive compensation in our periodic reports and proxy statements. As a result, our stockholders may not have access to certain information they deem important.

34

Table of Contents

In addition, Section 107 of the JOBS Act provides that we, as an emerging growth company, can take advantage of the exemption from complying with new or revised accounting standards provided in Section 7(a)(2)(B) of the Securities Act as long as we are an emerging growth company. An emerging growth company can, therefore, delay the adoption of certain accounting standards until those standards would otherwise apply to private companies. The JOBS Act provides that a company can elect to opt out of the extended transition period and comply with the requirements that apply to non-emerging growth companies, but any such election to opt out is irrevocable. We have elected not to opt out of such extended transition period, which means that when a standard is issued or revised and it has different application dates for public or private companies, we, as an emerging growth company, can adopt the new or revised standard at the time private companies adopt the new or revised standard. This may make comparison of our financial statements with another public company which is neither an emerging growth company nor an emerging growth company which has opted out of using the extended transition period difficult or impossible because of the potential differences in accounting standards used.

We will remain an emerging growth company until the earliest of (i) the last day of the fiscal year (A) following March 4, 2024, the fifth anniversary of the Initial Public Offering, (B) in which we have total annual gross revenue of at least $1.07 billion or (C) in which we are deemed to be a large accelerated filer, which means the market value of our Class A common stock that is held by non-affiliates exceeds $700.0 million as measured on the last business day of our most recently completed second fiscal quarter, or (ii) the date on which we have issued more than $1.0 billion in non-convertible debt during the prior three-year period. We could be subject to the additional requirements associated with being deemed a large accelerated filer as early as of the end of the 2021 fiscal year.

We cannot predict if investors will find our Class A common stock less attractive because we will rely on these exemptions. If some investors find our Class A common stock less attractive as a result, there may be a less active trading market for our Class A common stock and our stock price may be more volatile.

Failure to timely implement and maintain adequate financial, information technology and management processes and controls and procedures could result in material weaknesses which could lead to errors in our financial reporting and adversely affect our business.

We are subject to the SEC’s internal control over financial reporting requirements and will become subject to the auditor attestation requirements in the year in which we are deemed to be a large accelerated filer, which would occur once the market value of our Class A common stock held by non-affiliates exceeds $700.0 million as of the end of the prior fiscal year’s second fiscal quarter, or once we otherwise lose our “emerging growth company” status. Prior to the Business Combination, we were a special purpose acquisition company formed for the purpose of effecting a merger, capital stock exchange, asset acquisition, stock purchase, reorganization or other similar business combination with one or more operating businesses. As a result, previously existing internal controls are no longer applicable or comprehensive enough as of December 31, 2020 as our operations prior to the Business Combination were insignificant compared to those of the consolidated entity post-Business Combination. The design of internal controls over financial reporting for our business post-Business Combination has required and will continue to require significant time and resources from management and other personnel. As a result, management was unable, without incurring unreasonable effort or expense to conduct an assessment of our internal control over financial reporting as of December 31, 2020 and has excluded management's report on internal control over financial reporting pursuant to Section 215.02 of the SEC Division of Corporation Finance's Regulation S-K Compliance & Disclosure Interpretations. We will be required to include a report on management’s assessment of our internal control over financial reporting as of December 31, 2021 irrespective of whether we remain an emerging growth company.

35

Table of Contents

Any failure to implement and maintain effective internal controls over financial reporting could adversely affect the results of assessments by our independent registered public accounting firm and its attestation reports.

If we are unable to certify the effectiveness of our internal controls, or if our internal controls have a material weakness, we may not detect errors timely, our financial statements could be misstated and we could be subject to regulatory scrutiny and a loss of confidence by stakeholders, which could harm our business and adversely affect the market price of our Class A common stock.

There can be no assurance that we will be able to comply with the continued listing standards of Nasdaq.

Our Class A common stock is currently listed on Nasdaq. Our continued eligibility for listing may depend on, among other things, compliance with minimum price and corporate governance requirements. If Nasdaq delists our Class A common stock from trading on its exchange for failure to meet the Nasdaq listing standards, we and our stockholders could face significant material adverse consequences including:

The National Securities Markets Improvement Act of 1996, which is a federal statute, prevents or preempts states from regulating the sale of certain securities, which are referred to as “covered securities.” Because our Class A common stock is currently listed on Nasdaq, it is a covered security. Although states are preempted from regulating the sale of our securities, the federal statute does allow states to investigate companies if there is a suspicion of fraud, and, if there is a finding of fraudulent activity, then states can regulate or bar the sale of covered securities in a particular case. Further, if we were no longer listed on Nasdaq, our securities would not be covered securities and we would be subject to regulation in each state in which we offer our securities.

If securities or industry analysts do not publish or cease publishing research or reports about us, our business or our market, or if they change their recommendations regarding our Class A common stock adversely, the price and trading volume of our Class A common stock could decline.

The trading market for our Class A common stock is influenced by the research and reports that industry or securities analysts may publish about us, our business, our market or our competitors. If any of the analysts who cover us provide negative recommendations or change their recommendation regarding our stock adversely, or provide more favorable relative recommendations about our competitors, the price of our Class A common stock would likely decline. If any analyst who covers us were to cease its coverage or fail to regularly publish reports on us, we could lose visibility in the financial markets, which could cause our stock price or trading volume to decline.

Provisions in our Charter may prevent or delay an acquisition of us, which could decrease the trading price of our Class A common stock, or otherwise may make it more difficult for certain provisions of the Charter to be amended.

The Charter contains provisions that are intended to deter coercive takeover practices and inadequate takeover bids and to encourage prospective acquirers to negotiate with our board of directors rather than to attempt a hostile takeover. These provisions include:

36

Table of Contents

These provisions apply even if the offer may be considered beneficial by some stockholders and could delay or prevent an acquisition that our board of directors determines is not in our and our stockholders’ best interests.

Our Charter designates state courts within the State of Delaware as the exclusive forum for certain types of actions and proceedings that may be initiated by our stockholders, which could limit stockholders’ ability to obtain a favorable judicial forum for disputes with us or our directors, officers, employees or agents.

The Charter provides that, unless we consent in writing to the selection of an alternative forum, to the fullest extent permitted by law, a state court located within the State of Delaware (or, if no court located within the State of Delaware has jurisdiction, the federal district court for the District of Delaware) shall be the sole and exclusive forum for any internal or intra-corporate claim or any action asserting a claim governed by the internal affairs doctrine as defined by the laws of the State of Delaware, including, but not limited to (i) any derivative action or proceeding brought on behalf of us; (ii) any action asserting a claim of breach of a fiduciary duty owed by any of our directors, officers or other employees or stockholders to us or our stockholders; or (iii) any action asserting a claim arising pursuant to any provision of the Delaware General Corporation Law (the “DGCL”) or the Charter or our amended and restated bylaws (the “Bylaws”) (in each case, as they may be amended from time to time), or as to which the DGCL confers jurisdiction on the Court of Chancery of the State of Delaware.

In addition, the Charter provides that, unless we consent in writing to the selection of an alternative forum, to the fullest extent permitted by law, the federal district court for the District of Delaware (or, if such court does not have jurisdiction over such action, any other federal district court of the United States) shall be the sole and exclusive forum for any action asserting a cause of action arising under the Securities Act or any rule or regulation promulgated thereunder (in each case, as amended), provided, however, that if the foregoing provisions are, or the application of such provisions to any person or entity or any circumstance is, illegal, invalid or unenforceable, the sole and exclusive forum for any action asserting a cause of action arising under the Securities Act or any rule or regulation promulgated thereunder (in each case, as amended) shall be the Court of Chancery of the State of Delaware.

The Charter provides that the exclusive forum provision will be applicable to the fullest extent permitted by applicable law. Section 27 of the Exchange Act creates exclusive federal jurisdiction over all suits brought to enforce any duty or liability created by the Exchange Act or the rules and regulations thereunder. As a result, the exclusive forum provision will not apply to suits brought to enforce any

duty or liability created by the Exchange Act or any rule or regulation promulgated thereunder (in each case, as amended), or any other claim over which the federal courts have exclusive jurisdiction.

This choice of forum provision may limit a stockholder’s ability to bring a claim in a judicial forum that it finds favorable for disputes with us or any of our directors, officers, other employees or stockholders, which may discourage lawsuits with respect to such claims, although our stockholders will not be deemed to have waived our compliance with federal securities laws and the rules and regulations thereunder. Alternatively, if a court were to find the choice of forum provision contained in our Charter to be inapplicable or unenforceable in an action, we may incur additional costs associated with resolving such action in other jurisdictions, which could harm our business, operating results and financial condition.

37

Table of Contents

We may issue shares of preferred stock or additional shares of Class A common stock, which would dilute the interest of our stockholders.

Our Charter provides for 312,000,000 authorized shares of capital stock, consisting of (i) 300,000,000 shares of Class A common stock and (ii) 12,000,000 shares of preferred stock. We may issue a substantial number of shares of preferred stock and/or additional shares of Class A common stock, which:

​

38

Table of Contents

In November 2020, we opened a satellite research and development and engineering center in Farmington Hills, Michigan. This facility includes space for vehicle inspection and benchmarking, as well as labs for testing, validation and prototyping.

In Irvine, California, we have established an engineering, technology and service center. We have established Lordstown EV Sales, LLC, to receive direct orders from customers and have received our dealership license from California.

39

Table of Contents

Table of Contents

Table of Contents

Manufacturing Facility. We consider our 6.2 million square foot, near-production ready Lordstown Complex one of our key competitive advantages. We acquired the plant from General Motors in 2019 and are in the process of repurposing and retooling the factory for electric vehicle production rather than internal combustion engine (“ICE”) vehicle production.

Propulsion Production and Assembly Lines. Concurrent with the retooling of the assembly and production floor, we are building an approximate 800,000 square foot battery pack production and assembly and hub motor production capabilities.

Personnel. At the end of fiscal 2020 the company employed 320 full-time personnel in the areas of manufacturing, engineering, marketing, sales, facilities, human resources, IT, supply chain, accounting and finance. These employees are engineering the Endurance and preparing the plant for mass production. We expect to end fiscal year 2021 with over 1,000 employees.

Research and Development Center. In November 2020, the company opened a satellite research and development center in Farmington Hills, Michigan. This facility includes space for vehicle inspection and benchmarking, as well as labs for testing, validation and prototyping. We understand that automotive engineering talent in the Detroit area is world-renowned and, with this new Research and Development (“R&D”) Engineering Center, expects to access the deep automotive engineering talent pool and numerous automotive supplier partners that exist in the region.

First Sales and Service Center. We established our first sales and service center in Irvine, California. The facility, combined with our mobile service, will enable us to service commercial users in the southern California region. We have chosen California as the location for our first service center outside of Ohio due to the favorable regulatory backdrop in the state, which is aggressively promoting more widespread adoption of electric vehicles. We have established Lordstown EV Sales, LLC, to receive direct orders from customers and have received our dealership license from California.

Strategic Relationships. We continues to build out its supply network and has an agreement with Elaphe to license and provide manufacturing services with respect to its in-wheel hub motors. We have secured long-term supply agreements with two leading global battery cell suppliers, representing two of the Endurance’s most critical components.

Camping World. We announced the formation of a relationship with Camping World (NYSE: CWH), to create a national electric vehicle (“EV”) service and collision network for our vehicles, beginning with the Endurance. We are currently in discussions with Camping World regarding a comprehensive service agreement that includes the re-design of their existing service centers for electric vehicles, as well as other comprehensive service aspects such adding fast charging capabilities, and servicing and repairing Endurance vehicles. More specifically, the discussions include cost-sharing, timing of rollout, technical education on services, customer engagement and interaction, and other related services. Camping World is the nation’s largest retailer of recreational vehicles (“RV”) and related products and services. We intend to leverage Camping World’s growing national footprint of over 170 U.S. Service and Collision Centers, with thousands of technicians and service bays, a 24/7 tech hotline and with a Roadside Assistance Program, to provide one of the most comprehensive EV support systems ever designed.

Additionally, we are exploring with Camping World the development of new EV products and solutions for the RV marketplace based on the Endurance platform, including the first, all electric, high-volume production RV (“eRV”) and a lithium-ion battery pack for travel trailers that would replace conventional gasoline onboard generators.

42

Table of Contents

Other planned initiatives. We further aim to partner with key service providers to enable to support fleet operators and other customers efficiently and effectively for aftermarket parts and service and charging infrastructure. Management believes that most fleet operators use service agreements with third-party service providers to maintain and repair their fleets and provide OEM parts, and that an arrangement with a national service provider would be attractive to fleet customers considering purchasing the Endurance. We are also evaluating partnerships with electric vehicle charging station providers to provide Endurance purchasers with access to their networks. As fleet operators also typically bring their vehicles back to a central location each day, vehicle charging infrastructure can also be installed at those locations.

43

Table of Contents

Table of Contents

sources of equity and debt capital, we are also pursuing governmental support. We accepted an invitation from the U.S. Department of Energy to start the process toward securing an ATVM loan. We are currently in the due diligence phase. If we are successful in completing this stage, we may receive a term sheet, but we cannot guarantee we will reach that stage or be approved for a loan or provide any assurance as to the amount of any loan that we may receive. Broadly speaking, prior ATVM loans were offered at Treasury rates for interest expense and required that the proceeds be spent on plant retooling or R&D activities.

Cash Flows from Operating Activities

​

Our cash flows from operating activities are significantly affected by our cash investments to support the growth of our business in areas such as research and development and selling, general and administrative expenses.

​

Net cash used in operating activities increased to $64.3 million during the year ended December 31, 2020 from $5.2 million from the period from April 30, 2019 to December 31, 2019. This increase was primarily due to increase in R&D expenditures to bring the Endurance to market, increase in headcount for the personnel ramp up and marketing expenses.

​

Cash Flows from Investing Activities

​

The net cash used in investing activities increased to $55.8 million for the year ended December 31, 2020 from $0.1 million for the period from April 30, 2019 to December 31, 2019 primarily due to purchase of capital assets related to the Lordstown Complex re-tooling in preparation for the manufacturing of the Endurance pickup truck.

​

Cash Flows from Financing Activities

​

Cash flows from financing activities during the year ended December 31, 2020 consisted primarily of $671.8 million from cash received in recapitalization, net of transaction costs, $37.8 million from related party notes payable and $30.7 million from shares issued for exercise warrants. Cash flows from financing activities during the period from April 30, 2019 to December 31, 2019 consisted primarily of $7.5 million from issuance of common stock.

​

Off-Balance Sheet Financing Arrangements

We have no obligations, assets or liabilities, which would be considered off-balance sheet arrangements as of December 31, 2020. We do not participate in transactions that create relationships with unconsolidated entities or financial partnerships, often referred to as variable interest entities, which would have been established for the purpose of facilitating off-balance sheet arrangements. We have not entered into any off-balance sheet financing arrangements, established any special purpose entities, guaranteed any debt or commitments of other entities, or purchased any non-financial assets.

45

Table of Contents

Critical Accounting Policies

Cash and cash equivalents

Cash includes cash equivalents which are highly liquid investments that are readily convertible to cash. The Company considers all liquid investments with original maturities of three months or less to be cash equivalents. The Company presents cash and cash equivalents within Cash and cash equivalents on the Balance Sheet.

The Company maintains its cash in bank deposit accounts which, at times, exceed federally insured limits. The Company has not experienced any losses in such accounts and management believes it is not exposed to significant credit risk.

Property, plant and equipment

Property and equipment are stated at cost less accumulated depreciation. Depreciation is computed using the straight-line method over the estimated useful lives of the related assets. Determination of useful lives and depreciation will begin once the assets are ready for their intended use.

Upon retirement or sale, the cost and related accumulated depreciation are removed from the balance sheet and the resulting gain or loss is reflected in operations. Maintenance and repair expenditures are expensed as incurred, while major improvements that increase functionality of the asset are capitalized and depreciated ratably to expense over the identified useful life. Further, interest on any debt financing arrangement is capitalized to the purchased property, plant, and equipment if the requirements for capitalization are met.

Long-lived assets, such as property, plant, and equipment are reviewed for potential impairment whenever events or changes in circumstances indicate that the carrying amount of an asset or asset group may not be recoverable. Recoverability of assets to be held and used is measured by a comparison of the carrying amount of an asset or asset group to estimated undiscounted future cash flows expected to be generated by the asset or asset group. If the carrying amount of an asset or asset group exceeds its estimated undiscounted future cash flows, an impairment charge is recognized by the amount by which the carrying amount of the asset or asset group exceeds the fair value of the asset or asset group.

Recent Accounting Standards

Management does not believe that any recently issued, but not yet effective, accounting standards, if currently adopted, would have a material effect on our condensed consolidated financial statements.

46

Table of Contents

Table of Contents

To the Stockholders and Board of Directors
Lordstown Motors Corp.:

Opinion on the Consolidated Financial Statements

We have audited the accompanying consolidated balance sheet of Lordstown Motors Corp. and subsidiary (the Company) as of December 31, 2020, the related consolidated statements of operations, stockholders’ equity, and cash flows for the year ended December 31, 2020, and the related notes (collectively, the consolidated financial statements). In our opinion, the consolidated financial statements present fairly, in all material respects, the financial position of the Company as of December 31, 2020, and the results of its operations and its cash flows for the year ended December 31, 2020, in conformity with U.S. generally accepted accounting principles.

Basis for Opinion

These consolidated financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on these consolidated financial statements based on our audit. We are a public accounting firm registered with the Public Company Accounting Oversight Board (United States) (PCAOB) and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

We conducted our audit in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the consolidated financial statements are free of material misstatement, whether due to error or fraud. Our audit included performing procedures to assess the risks of material misstatement of the consolidated financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the consolidated financial statements. Our audit also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the consolidated financial statements. We believe that our audit provides a reasonable basis for our opinion.

/s/ KPMG LLP

We have served as the Company’s auditor since 2020.

New York, New York
March 24, 2021

​

​

48

Table of Contents