Table of Contents

​

​

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

Form 10-K

(Mark One)

For the fiscal year ended December 31, 2022

or

For the transition period from ______ to _______

Commission File Number: 001-16391
​

Axon Enterprise, Inc.

(Exact name of registrant as specified in its charter)

​

Registrant’s telephone number, including area code:

(480) 991-0797

Securities registered pursuant to Section 12(g) of the Act:

None

(Title of Class)

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.

Yes  ☒    No ☐

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.   Yes  ☐    No  ☒

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.   Yes  ☒    No  ☐

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files).   Yes  ☒    No  ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

​

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 762(b)) by the registered public accounting firm that prepared or issued its audit report.  ☒

If securities are registered pursuant to Section 12(b) of the Act, indicate by check mark whether the financial statements of the registrant included in the filing reflect the correction of an error to previously issued financial statements. ☐

Indicate by check mark whether any of those error corrections are restatements that required a recovery analysis of incentive-based compensation received by any of the registrant’s executive officers during the relevant recovery period pursuant to §240.10D-1(b). ☐

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act).   Yes  ☐    No  ☒

As of June 30, 2022, the aggregate market value of the registrant’s common stock held by non-affiliates of the registrant was approximately $6.3 billion based on the closing sale price as reported on The NASDAQ Global Select Market.

The number of shares of the registrant’s common stock outstanding as of February 24, 2023 was 72,862,227

DOCUMENTS INCORPORATED BY REFERENCE

Parts of the registrant’s definitive proxy statement for its 2023 annual meeting of stockholders to be prepared and filed with the Securities and Exchange Commission not later than 120 days after December 31, 2022 are incorporated by reference into Part III of this Form 10-K.

​

​

​

Table of Contents

AXON ENTERPRISE, INC.

INDEX TO ANNUAL REPORT ON FORM 10-K

FOR THE YEAR ENDED DECEMBER 31, 2022

​

​

​

Table of Contents

Table of Contents

​

Financial Risks

​

​

Legal and Compliance Risks

​

Table of Contents

​

Risks Related to our Convertible Notes

​

​

​

Table of Contents

Table of Contents

Sales and Distribution: Who We Sell To and Where We Deliver

We think of our core customers as falling into roughly four categories of funding sources: U.S. state and local governments, the U.S. federal government, international government customers, and commercial enterprises. Additionally, the types of customers who find value in our product offerings are expanding beyond law enforcement to include attorneys, fire and EMS personnel, corrections and the U.S. military.

Axon’s sales force and strong customer relationships represent key strategic advantages. The majority of our revenues are generated via direct sales, including our online store, although we do leverage distribution partners and third-party resellers.

Our largest customer segment is U.S. state and local law enforcement. Axon has a customer relationship with over 95% of state and local law enforcement agencies in the United States. The remaining agencies are served via our telesales team, as well as distributors.

No customer represented more than 10% of total net sales for the years ended December 31, 2022, 2021 or 2020.

We are diversifying into new markets by adding new types of customer profiles, or users, and by adding to our core customer base. In recent years, we have been investing in sales personnel to capture these new markets, and in 2023, we will focus on strategic headcount additions to support key new markets and newer products.

Governmental agencies generally have the ability to terminate our contracts, in whole or in part, for reasons including, but not limited to, non-appropriation of funds. We continue to monitor developments in federal government funding.

Resources

Manufacturing and Supply Chain

We perform light manufacturing, final assembly, and final test operations at our headquarters in Scottsdale, Arizona, and own substantially all of the equipment required to develop, prototype, manufacture and assemble our finished products. We have continued to maintain both our ISO 9001 and our ISO 9001:2015 certifications.

Table of Contents

We continue to take steps to diversify our supply chain and global manufacturing footprint, which positioned us well managing through the recent supply chain challenges. Thus far, we have been able to produce and ship our critical core products. As we enter 2023, material availability is improving but still poses real risks to all businesses that manufacture products. Supplier decommitments remain our largest area of risk as we continue to experience this in several areas. However, we have put programs in place to mitigate this risk. We proactively manage our supply chain down to third tier suppliers to overcome material shortages as they arise. These actions align to our strategic model to help meet strong product demand while also preparing us to stagger factory work schedules as needed, which enables us to meet compressed build schedules over short periods of time. We continue to adjust strategic inventory levels based on areas of risk to mitigate potential supply disruptions.

In light of our broad domestic and international geographic supplier base, we are continuously monitoring our supply chain to manage through potential impacts, identifying alternate shipping / logistic sources, and working with foreign regulators to ensure that our suppliers can provide parts.

We obtain many of our components from single source suppliers; however, because we own the injection molded component tooling used in their production, we believe we could obtain alternative suppliers in most cases without incurring significant production delays. For additional discussion of sources and availability of raw materials, refer to Note 1 to the consolidated financial statements included in Part II, Item 8 of this Annual Report on Form 10-K.

We provide limited manufacturer’s warranties on our Axon devices and CEDs, and customers also have the option to purchase extended warranties. For additional information about our warranties, refer to Note 1 in the consolidated financial statements in Part II, Item 8 of this Annual Report on Form 10-K.

Intellectual Property

We protect our intellectual property with U.S. and international patents and trademarks. Our patents and pending patent applications relate to technology used by us in connection with our products. We also rely on international treaties, organizations and laws to protect our intellectual property. As of December 31, 2022, we hold 274 U.S. patents, 109 U.S. registered trademarks, 165 international patents, and 415 international registered trademarks, and also have numerous patent and trademark applications pending.

We continuously assess whether and where to seek formal protection for particular innovations and technologies based on such factors as the commercial significance of our operations and our competitors’ operations in particular countries and regions, our strategic technology or product directions in different countries, and the degree to which intellectual property laws exist and are meaningfully enforced in different jurisdictions. We have the exclusive rights to many Internet domain names, primarily including “Axon.com”, “Evidence.com”, and “TASER.com.”  We also vigorously protect our intellectual property, including trademarks, patents and trade secrets against third-party infringement.

Confidentiality agreements are used with employees, consultants and key suppliers to help ensure the confidentiality of our trade secrets.

Competition

Sensors — Connected Cameras and Digital Evidence Management Software: The body-worn camera and in-car video/automatic license plate readers market is highly competitive.  Our competition includes Motorola Solutions, Utility Associates, Getac Technology Corporation, Panasonic Corp., Reveal Media, Safe Fleet, Digital Ally Inc., Visual Labs Inc., Intrensic, LLC, as well as Safety Vision, LLC, Rekor Systems Inc., and Genetec Inc.

The market for software solutions to improve public safety agency workflows is both highly fragmented and highly competitive. Our cloud-based digital evidence management system, Axon Evidence, competes with both cloud-based platforms and on-premises based systems designed by third-parties or developed internally by an agency's technology staff. Our competition includes Motorola Solutions, Panasonic Corp., IBM, Oracle, FotoWare, Vidizmo, LLC, NICE, QueTel Corporation, OpenText Corporation, and FileOnQ among others.

Table of Contents

Key competitive factors in this market include product performance, product features (including live-streaming, GPS tracking, and pre-event buffering), battery life, product quality and warranty, total cost of ownership, data security, data and information workflows, company reputation and financial strength, and relationships with customers.

Productivity and Real-Time Operations — Records Management System (RMS) and Computer Aided Dispatch (CAD): The RMS and CAD markets are highly competitive and highly fragmented. We have identified more than 50 software providers, including Motorola Solutions, Tyler Technologies, Central Square Technologies (formerly Superion, TriTech and Aptean), Northrop Grumman, Hexagon AB, Niche Technology Inc., Caliber Public Safety (parent, Harris Computer Systems), Saab, SOMA Global, RapidDeploy Inc., Sopra Steria, Mark43 Inc, and CSI Technology Group. In addition, not all law enforcement agencies use software for report writing — some still use paper. We believe our network of camera sensors and digital evidence management platform give us a strategic advantage in these product categories. Our Respond offering competes both with real-time operations platforms that ingest body camera video feeds, like Motorola’s CommandCentral Aware, Hitachi's Visualization Suite and Genetec's Citigraf as well as platforms that ingest video feeds exclusively from surveillance cameras, like Rave Mobile Safety, Live Earth and Mutualink among others.

TASER for Professional User Markets: Our CEDs compete with a variety of less-lethal alternatives to firearms, including rubber bullets or rubber baton rounds, such as those made by Combined Systems; pepper spray, pepper spray projectiles, such as those made by Byrna Technologies Inc. (dba Fox Labs), SABRE Corporation, and Mace Security International, Inc.; traditional stun guns, such as those made by UZI and Jolt; hand-held remote restraint devices involving a tether, such as the one made by Wrap Technologies Inc.; laser dazzlers that cause temporary blindness, such as the one made by B.E. Meyers & Co., Inc.; stun grenades, such as those made by Combined Systems, Inc.; long-range acoustic devices, such as the one made by Genasys Inc.; police batons and night sticks, such as those made by Monadnock and by Armament Systems and Procedures, Inc. TASER devices offer advanced technology, versatility, portability, effectiveness, built-in accountability systems, and low injury rates, which enable us to compete effectively against other less-lethal alternatives. TASER devices also offer connectivity to our cloud network, which allows law enforcement agencies and other professional users to more effectively manage their less-lethal programs and automate use-of-force reporting.

The primary competitive factors in this market include a device’s accuracy, effectiveness, reputation, safety, cost, ease of use, and exceptional customer experience. The design maturity of the TASER platform, as well as our development and sale of a two-shot device, are also key competitive differentiators. We are aware of competitors providing competing CED products primarily in international markets.

Virtual Reality (“VR”) De-Escalation Training for Law Enforcement, Corrections and Private Security Markets: Our VR Training platform competes with several other companies in the space who offer simulation scenarios, including simulated training on the use of both lethal and less-lethal alternatives. Our competition in this space includes VirTra Inc., Apex Officer, Laser Shot Inc., InVeris Training Solutions Inc., MILO, Ti Training Corp, Adaptive VR Ltd. (AVRT), V-Armed, Street Smarts VR and WRAP Technologies.

Key competitive factors in this market include scale of content library, integration to additional sensors and devices (e.g. haptic suit, TASER), ease of use, visual fidelity and realism, quality of immersion experience (enhanced by capabilities such as eye tracking and speech recognition) and portability.

TASER for Personal Safety: In the private citizen market, TASER devices compete with firearms and with other less-than-lethal self-defense options such as stun guns and pepper spray-based products including pepper guns and miniature spray cans. Leading competitors in the less-than-lethal space include Byrna Technologies, Inc., Salt Supply Co., PepperBall, Mace, SABRE and Vipertek. The TASER StrikeLight competes in the flashlight category, in which there are dozens, if not hundreds, of competitors, including tactical flashlight providers with and without stun-gun capabilities.

TASER personal safety devices are not stun guns, and have different capabilities, including NMI (neuro-muscular incapacitation) functionality. The broader market for personal safety and home defense is far-reaching, and

Table of Contents

categories range from threat detection and accountability (dash and doorbell cameras), to home security (home alarms, locks, and response services) to personal defense (firearms, stun guns, TASER devices, pepper spray, tactical flashlights, and personal alarms), to personal tracking and emergency notification mobile applications.

The primary benefit of TASER devices is in less-than-lethal stopping power. Other competitive factors include a device’s cost, effectiveness, safety, ease of use, and available training options.

Non-Axon trademarks are property of their respective owners.

Seasonality

We have historically experienced higher net sales in our fourth quarter compared to other quarters in our fiscal year due primarily to municipal budget cycles. Additionally, new product introductions can significantly impact the cadence of net sales, product costs and operating expenses. Municipal law enforcement budgets tend to feature a mix of fiscal years that end in either June, September or December. However, historical seasonal patterns, municipal budgets or historical patterns of product introductions should not be considered reliable indicators of our future net sales or financial performance.

Governmental Regulation

We are subject to a variety of laws and regulations in the United States and abroad that involve matters central to our business, including, for example, laws and regulations related to: privacy and data protection, security, retention, and deletion; rights of publicity; content; intellectual property; regulation of certain of our CEDs as firearms; advertising; marketing; distribution; electronic contracts and other communications; competition; consumer protection; telecommunications; product liability; taxation; labor and employment; economic or other trade prohibitions or sanctions; securities; and online payment services. There are a number of legislative proposals in the U.S., at both the federal and state level, that could impose new obligations in areas affecting our business, such as liability for copyright infringement by third parties. Foreign laws and regulations can impose different obligations or be more restrictive than those in the U.S.

These U.S. federal and state and foreign laws and regulations, which in some cases can be enforced by private parties in addition to government entities, are constantly evolving and can be subject to significant change. As a result, the application, interpretation, and enforcement of these laws and regulations are often uncertain and may be interpreted and applied inconsistently from country to country and inconsistently with our current policies and practices. See “Item 1A. Risk Factors – Legal and Compliance Risks - A variety of new and existing laws and/or interpretations could materially and adversely affect our business.”

Radio Spectrum Devices

Certain of our products utilize the radio spectrum to provide wireless voice, data and video communications services. The allocation of spectrum is regulated in the U.S. and other countries and limited spectrum space is allocated to wireless services and specifically to public safety users. In the U.S., the Federal Communications Commission (“FCC”) regulates spectrum use by non-federal entities and federal entities. Similarly, countries around the world have one or more regulatory bodies that define and implement the rules for use of radio spectrum and electromagnetic interference, pursuant to their respective national laws. We manufacture and, after receiving the required approvals, we market our products in spectrum bands already made available by regulatory bodies.

Axon body worn cameras, docks, fleet vehicle cameras and signal devices are subject to FCC’s rules and regulations. The FCC regulates not only the "intentional radiation" of radio transmitters, but also the "unintentional radiation" of noise from all sorts of electrical equipment. Current Axon products use Bluetooth, WiFi and/or Long-Term Evolution (“LTE”) radio technologies. With the integration of LTE technologies, we must also apply for the approval of private certifications such as Cellular Telecommunications and Internet Association certification, required

Table of Contents

by FirstNet and other operators. These regulations affect CEDs with Signal technology, including the TASER 7 and TASER 10, SPPM, and future CEDs implementing wireless technology.

Axon and TASER Devices

For our TASER products, we rely on the opinions of the U.S. Bureau of Alcohol, Tobacco, Firearms and Explosives (“ATF”), including the determination that a device that does not expel projectiles by the action of an explosive is not classified as a firearm.

Federal regulation of sales in the U.S.: All current CED models, with the exception of TASER 10, which launched in January 2023, are not firearms regulated by the ATF, and our consumer products are regulated by the U.S. Consumer Product Safety Commission. The TASER 10 is regulated by the ATF under the Gun Control Act of 1968 and is subject to applicable state and local firearms regulations that are jurisdiction-specific. Axon must maintain a federal firearms license to manufacture and sell the TASER 10, which subjects Axon to periodic compliance inspections by the ATF. License violations discovered by the ATF can result in fines, penalties, warning letters or license revocation. Additionally, if we fail to comply with ATF rules and regulations, the ATF may limit our TASER 10 activities or growth, fine us, or ultimately, suspend our ability to produce and sell the TASER 10 product line. There are currently no federal laws restricting sales of our other currently offered CED products in the U.S.

Axon devices using lithium batteries are subject to U.S.-DOT/UN 38.3 for transportation.

Our CED products are also subject to testing, safety and other standard organizations such as the American National Standards Institute, the International Electrotechnical Commission, the National Institute of Standards and Technology, and Underwriters Laboratories. These regulations also affect CEDs with Axon Signal technology, including Signal Performance Power Magazine technology, and TASER 7 battery packs.

Federal regulation of international sales: Our CEDs are considered a “crime control” product by the U.S. Department of Commerce (DOC) for export directly from the U.S. which requires us to obtain an export license from the DOC for the export of our CED devices from the U.S. to any country other than Canada. Future products and services may require classifications from the DOC before they may be shipped internationally. Our inability to obtain DOC export licenses or classifications on a timely basis for sales of our products to our international customers could significantly and adversely affect our international sales. Although TASER 10 is regulated by the ATF for domestic sales, the U.S. DOC has ruled that the product’s unique propulsion design has no impact on its export classification and that the TASER 10 model’s export classification remains consistent with all other TASER CED models.

Federal regulation of foreign national employees: Our CED development and production is also considered controlled “technology” by the U.S. DOC and is categorized as a “deemed export” for any foreign national employees exposed to the technology within the U.S. Consequently, we must obtain export licenses from the DOC for any deemed export within the U.S. made to a foreign national employee exposed to the deemed controlled technology. Deemed export licenses are subject to DOC approvals and issued licenses require annual status reports for the stated employees. Inability to obtain proper licensing could curtail the company’s ability to recruit employees and execute R&D and production related to CED technology.

State and local regulation: Our CEDs are controlled, restricted or, less frequently, prohibited by some state and local governments. As of December 31, 2022, Rhode Island is the only state that prohibits the possession of our TASER-branded devices that are not regulated by the ATF. However, that prohibition was struck down as unconstitutional by a federal court, and new legislation is expected. Additionally, some cities and municipalities also prohibit private citizen possession or use of our CED products. However, with the launch of TASER 10 in January 2023, we may need to comply with additional state and local requirements governing the sale of firearms if that device is sold to non-law enforcement customers.

International regulation of foreign imports and sales: Certain jurisdictions prohibit, restrict, or require a permit for the importation, sale, possession or use of CEDs, including in some countries by law enforcement agencies, limiting our international sales opportunities.

Table of Contents

U.S. and International regulation of component movements globally: We rely on a global supply chain of components across our product lines with most final assembly occurring in the U.S. Export of these components from abroad is subject to shifting regulatory landscapes imposed by both the foreign government and U.S. authorities upon import. Additionally, certain TASER 10 components are regulated for import into the U.S. by the ATF and are subject to ATF import permits which limits Axon’s ability to source from some suppliers leading to a potential decrease in supply chain agility.

International regulation of foreign-based operations: We maintain foreign operations in several countries globally for purposes of logistics, sales, general and administrative services, and R&D support. Depending on these activities, regulations can include business activity licensing and registration, import permits and recordkeeping, warehousing & storage security and permitting, and government reporting.

Environmental Regulations

We are subject to various state, federal and international laws and regulations governing the environment, including restricting the presence of certain substances in our products and making producers of those products financially responsible for the collection, treatment, recycling and disposal of such products.

The European Union (“EU”) has published Directives on the restriction of certain hazardous substances in electronic and electrical equipment (the “RoHS Directive”) and on electronic and electrical waste management (the “WEEE Directive”). The RoHS Directive restricts the use of a number of substances, including lead. The WEEE Directive directs members of the EU to enact laws, regulations, and administrative provisions to ensure that producers of electric and electronic equipment are financially responsible for the collection, recycling, treatment and environmentally responsible disposal of certain products sold into the EU. In addition, similar environmental legislation has been enacted in other jurisdictions, including the U.S. (under federal and state laws) and other countries.

In addition, the EU has defined a regulation for the registration, evaluation, authorization and restriction of chemicals that places responsibility on companies to manage the risks from chemicals contained in products and to provide safety information about such substances. Manufacturers and importers are required to gather information on the properties of the chemical substances in their products and provide for their safe handling. As of January 5, 2021, companies supplying products on the EU market containing substances of very high concern as identified by the EU have to submit information on these products to the European Chemicals Agency. The information in their database is then made available to waste operators and consumers.

Other countries have adopted chemical restrictions regulations, including but not limited to the U.S., Canada, and Australia. New, or changes in, environmental safety laws, regulations or rules could also lead to increased costs of compliance, including remediations of any discovered issues, and changes to our operations, which may be significant. Any failures to comply could result in significant expenses, delays or fines.

Privacy Regulations

We are subject to laws and regulations that dictate whether, how, and under what circumstances we can collect, transfer, process and/or receive certain data that is critical to our operations, including data shared between countries or regions in which we operate and data shared among our products and services. These laws and regulations often create private rights of action, impose new potential monetary penalties for noncompliance, and may require us to adopt additional contractual obligations as well as restrict our ability to store or process data.

Table of Contents

We continue to monitor and assess for compliance as the regulatory environment evolves both within the United States and in relevant international markets. Laws and regulations often involve matters central to our business, including:

Dynamic, and sometimes inconsistent, interpretations of what constitutes “personal information” enhance the complexity of complying with these regulations across jurisdictions.

Human Capital Resources

Our success depends on the continued service of our employees and on our ability to continue to attract, retain, and motivate top talent. To facilitate this, we strive to create a diverse and inclusive environment at Axon, with equitable opportunities for employee growth and development, supported by strong compensation and benefits and by programs that build connections between our employees and their communities. Axon’s mission is central to our recruiting and retention efforts.

As of December 31, 2022, we had 2,821 full-time employees and 913 temporary employees (temporary employees include contractors, interns, and consultants). During fiscal 2022, the number of full-time employees increased by 673 or 31%, primarily for product support, R&D, and other support organizations.

Our employees are not covered by any collective bargaining agreement, and we have never experienced a work stoppage. We believe that our relations with our employees are strong. We closed the year with our regrettable attrition rate^(a) at 2.02%, well under the annual goal of 2.5%. More than 90% of employees reported feeling proud to work at Axon during 2022’s employee engagement survey.  

Diversity and Inclusion

We embrace diversity, equity and inclusion. A truly innovative workforce needs to be diverse, leverage the skills and perspectives of a wealth of backgrounds and experiences, and ensure that all employees are equitably empowered to succeed. We continue to focus on the hiring, retention, development, and advancement of women and underrepresented communities. We are focused on recruiting diverse candidates and on internal talent development of our diverse leaders so that they can advance their careers and move into leadership positions.

Our employee affinity groups are company-sponsored, employee-led communities that address specific needs, priorities, and barriers to success for each community of focus. These groups provide a forum for employees to discuss problems and craft solutions for each community of focus, while also creating leadership and professional development opportunities for members. Throughout 2022 we continued to see active participation in all six of our affinity groups — Axon Allies for LGBTQ+ employees, APIA for Asian Pacific Islander employees, HOLA for Hispanic employees, Axon Mosaic for Black employees, Axon Vets for service veterans, and Women at Axon. Each affinity group is inclusive of employees who identify as members of each community, as well as allies.

In 2022, we formed the Ethics & Equity Advisory Council (EEAC) to ensure that ethics and equity are at the forefront of our services and product development. We believe that our ability to retain our workforce is dependent

Table of Contents

upon fostering an environment that is sustainably safe, respectful, fair and inclusive of everyone and promotes diversity, equity and inclusion inside and outside of our business. Internally, we continue to listen to our employees with town hall sessions, provide expert-led webinars, and host community round tables.

Health and Safety

The health and safety of our employees is of utmost importance to us. We conduct regular self-assessments and audits to ensure compliance with our health and safety guidelines and regulatory requirements. Our ultimate goal is to achieve a level of work-related injuries as close to zero as possible through continuous investment in our safety programs. We provide protective gear (e.g. eye protection, masks and gloves) as required by applicable standards and as appropriate given employee job duties.

To promote mental and emotional wellbeing, all full-time employees are provided free, unlimited access by Axon to Ginger. Ginger is a 24/7 resource that includes individualized coaching via text in addition to access to articles and activities offering guidance on maintaining emotional balance throughout tumultuous times.

Additionally, we have a Wellness Incentive Program for our domestic employees that incentivizes healthy lifestyles. The program rewards employees for completing a variety of well-being activities that help foster their financial wellness, mental health, social wellbeing, community engagement and nutrition. 

​

Corporate Information

We were incorporated in Arizona in September 1993 as ICER Corporation. We changed our name to AIR TASER, Inc. in December 1993 and to TASER International, Incorporated in April 1998. In January 2001, we reincorporated in Delaware as TASER International, Inc., and in April 2017, changed our name to Axon Enterprise, Inc.

Available Information

Our Annual Reports on Form 10-K, Quarterly Reports on Form 10-Q, Current Reports on Form 8-K, proxy statements and amendments to those reports filed with or furnished to the SEC are available free of charge on our website at http://investor.axon.com as soon as reasonably practicable after we electronically file or furnish such material to the SEC. The information on our website, including information about our trademarks, is not incorporated by reference into or otherwise a part of this Annual Report on Form 10-K. The SEC maintains a website that contains reports, proxy and information statements and other information regarding issuers that file electronically with the SEC at http://www.sec.gov.

Table of Contents

Strategic Risks

We are substantially dependent on acceptance of our products by law enforcement markets, throughout the world. If law enforcement agencies do not continue to purchase and use our products and services, our growth prospects, operating results and financial conditions will be materially adversely affected.

At any point, whether or not related to the performance of our products and services, law enforcement agencies may elect to no longer purchase our CEDs or other products and services. For example, in the past, we believe that our sales were adversely impacted by negative coverage and publicity surrounding our products and services and their use. If law enforcement agencies no longer purchase our products and services, or materially decrease their purchases, our growth prospects, operating results and financial condition will be materially adversely affected.

We substantially depend on sales of our TASER CEDs, and if these products do not continue to be widely accepted, our growth prospects will be diminished.

In the years ended December 31, 2022, 2021 and 2020, we derived a significant portion of our revenues from sales of TASER brand devices and related cartridges, whether on a standalone basis or as part of a bundled offering, and expect to depend on sales of these products for a significant portion of our revenue for the foreseeable future. A decrease in the selling prices of, or demand for these products, or their failure to maintain broad market acceptance, would significantly harm our growth prospects, operating results and financial condition.

If we are unable to design, introduce, sell and deploy new products or new product features successfully, our business and financial results could be adversely affected.

Our future success will depend on our ability to develop new products or new product features that achieve market acceptance in a timely and cost-effective manner. The development of new products and new product features is complex, time consuming and expensive, and we may experience delays in completing the development and introduction of new products. We may choose to carry higher levels of inventory to mitigate the risk of production delays, which may in turn expose us to an increased risk of obsolescence.

We have devoted, and continue to devote, significant resources to develop and deploy our cloud-based productivity and real-time operations SaaS solutions, which we continue to broadly deploy to a large number of customers. Customer requirements for these products are complex and varied. If we are unable to develop scalable solutions that can be consistently configured for customers with minimal effort, or if we are unable to grow a professional services team that can consistently configure our products to meet the requirements of large numbers of customers in a timely and cost-effective manner, our ability to broadly scale our cloud-based productivity and real-time operations SaaS solutions could be negatively impacted, and our business prospects, operating results and financial condition could be negatively impacted..

We cannot provide any assurance that products that we may develop in the future will achieve market acceptance. If we fail to develop new products or new product features on a timely basis that achieve market acceptance, our business, financial results and competitive position could be adversely affected.

We face risks associated with rapid technological change and new competing products.

The technology associated with law enforcement devices and software is receiving significant attention and is rapidly evolving. While we have some patent protection in certain key areas of our Axon device, CED and SaaS technology, new technology may result in competing products that operate outside our patents and could present significant competition for our products, which could adversely affect our business, financial results and competitive position.

Our future success is dependent on our ability to expand sales through direct sales and distributors and our inability to increase direct sales or recruit new distributors would negatively affect our sales.

Our distribution strategy is to pursue sales through multiple channels which is principally through direct sales and independent distributors. We are focusing on direct sales to larger agencies through our regional sales managers

Table of Contents

and our inability to grow sales to these agencies in this manner would materially adversely affect our business prospects, operating results and financial condition In addition, our inability to establish relationships with and retain law enforcement equipment distributors, who we believe can successfully sell our products, would materially adversely affect our business prospects, operating results and financial condition. If we do not competitively price our products, meet the requirements of our distributors or end-users, provide adequate marketing support, or comply with the terms of our distribution arrangements, our distributors may fail to aggressively market our products or may terminate their relationships with us. These developments would likely have a material adverse effect on our sales. Our reliance on the sales of our products by others also makes it more difficult to predict our revenues, cash flow and operating results.

In certain states and foreign jurisdictions we have decided to pursue sales directly with law enforcement customers, rather than working through established distribution channels. Our customers may have strong working relationships with distributors and we may face resistance to this change. If we do not overcome this resistance and effectively build a direct relationship with our customers, sales may be adversely affected.

Acquisitions of, or investments in, other companies, products, or technologies may require significant management attention and could disrupt our business, dilute stockholder value, and adversely affect our operating results.

Our business strategy may include acquiring other complementary products, technologies or businesses. Negotiating these transactions can be time-consuming, difficult and expensive, and our ability to close these transactions may be subject to third-party approvals, such as government regulatory approvals, which are beyond our control. Consequently, we can make no assurance that these transactions once undertaken and announced, will close. 

These kinds of acquisitions or investments may result in unforeseen operating difficulties and expenditures. If we acquire businesses or technologies, we may not be able to integrate the acquired personnel, operations, and technologies successfully, or effectively manage the combined business following the acquisition. We also may not achieve the anticipated benefits from the acquired business due to a number of factors, including:

Table of Contents

We cannot assure you that the anticipated benefits of any acquisition or investment would be realized or that we would not be exposed to unknown liabilities or risks. Integrating an acquired technology, asset or business into our operations can be challenging, complex and costly and we cannot assure you that we will be successful or that the anticipated benefits of the acquisitions that we complete will be realized or outweigh their costs. If our integration and development efforts are not successful and the anticipated benefits of the acquisitions that we complete are not achieved, our business, operating results, financial condition, and prospects could be adversely affected.

In connection with these types of transactions, we may issue additional equity securities that would dilute our stockholders, use cash that we may need in the future to operate our business, incur debt on terms unfavorable to us or that we are unable to repay, incur large charges or substantial liabilities, encounter difficulties integrating diverse business cultures and values, and become subject to adverse tax consequences, substantial depreciation, or deferred compensation charges. These challenges could adversely affect our business, operating results, financial condition, and prospects.

​

We are highly dependent on the services of Patrick W. Smith, our Chief Executive Officer.

Our future success depends upon our ability to retain executive officers, specifically Patrick W. Smith, and any failure to do so could adversely impact our business, prospects, new product development, financial condition and operating results.

Operational Risks

Unavailability of materials or higher costs could adversely affect our financial results.

We depend on certain domestic and international suppliers for the delivery of components used in the assembly of our products. Our reliance on third-party suppliers creates risks related to our potential inability to obtain an adequate supply of components or sub-assemblies and reduced control over pricing and timing of delivery of components and sub-assemblies. Specifically, we depend on suppliers of sub-assemblies, machined parts, injection molded plastic parts, printed circuit boards, custom wire fabrications and other miscellaneous customer parts for our products. Although we have and are implementing additional long-term agreements with strategic suppliers to mitigate the risk of supply continuity, there remains risk across our supply chain while we extend our supplier contract program, and there is no guarantee that supply will not be interrupted. Additionally, if our suppliers do not accurately forecast and effectively allocate production or if they are not willing to allocate sufficient production to us, or they decommit to us previously agreed to supply levels, it may reduce our access to components and require us to search for new suppliers. As the scale of our hardware production increases, we will also need to accurately forecast, purchase, warehouse and transport components at high volumes to our manufacturing facilities. If we are unable to accurately match the timing and quantities of component purchases to our actual needs, we may incur unexpected production disruption, storage, transportation and write-off costs, which may harm our business and operating results.

Single or sole-source components used in the manufacture of our products may become unavailable or discontinued. Delays caused by industry allocations or obsolescence may take weeks or months to resolve. In some cases, parts obsolescence may require a product re-design to ensure quality replacement components. These delays could cause significant delays in manufacturing and loss of sales, leading to adverse effects significantly impacting

Table of Contents

our financial condition or results of operations and could harm our reputation. For example, revenue from TASER 7 for 2022 was impacted by approximately $35.0 million for orders that were scheduled to ship prior to December 31, 2022, but could not be fulfilled due to the delayed receipt of a manufacturing component for our TASER 7 devices. Additionally, Axon Body revenue was impacted by approximately $15.5 million for orders that were scheduled to ship prior to December 31, 2022, but could not be fulfilled due to supply chain constraints for our Axon Body 3 devices.

Due to the unique requirements of the TASER 10, we purchase our raw materials from a limited number of suppliers. Some of the raw materials that are used in the TASER 10 may be subject to fluctuations in market price which we may be unable to pass through to our customers to offset market fluctuations. Because of the unique requirements of the TASER 10, we cannot change suppliers easily. Any delay or interruption in the supply of these raw materials could impair our ability to manufacture and deliver the TASER 10, harm our reputation or cause a reduction in revenues.

A significant number of our raw materials or components are comprised of petroleum-based products or incur some form of landed cost associated with transporting the raw materials or components to our facility. Our freight and import costs and the timely delivery of our products could be adversely impacted by a number of factors which could reduce the profitability of our operations, including: higher fuel costs; potential port closures; customs clearance issues; increased government regulation or regulatory changes for imports of foreign products into the U.S.; delays created by terrorist attacks or threats, public health issues, national disasters or work stoppages; and other matters. Any interruption of supply for any material components of our products could significantly delay the shipment of our products and have a material adverse effect on our revenues, profitability and financial condition. For example, there have been disruptions in the semi-conductor supply chain that could negatively impact our ability to make our products.

International or domestic geopolitical or other events, including the imposition of new or increased tariffs and/or quotas by the U.S. government on any of these raw materials or components and other government trade policies, could adversely impact the supply and cost of these raw materials or components, and could adversely impact our revenues, profitability and financial condition. In particular, the implementation of tariffs and trade restrictions as well as changes in trade policies between the U.S. and China may have an adverse effect on our supply chain from a sourcing and cost perspective. We source certain raw materials from China, as do some of our suppliers. We may be unable to transition away from China to other jurisdictions or obtain secondary sources for raw materials which could result in a material adverse effect on our revenues, profitability and financial condition.

Material adverse developments in domestic and global economic conditions, or the occurrence of other world events, could materially adversely affect our revenue and results of operations.

Various factors contribute to the uncertain economic environment, including the conflict between Russia and Ukraine, the increase in, and volatility of, interest rates, high inflation,  an actual recession or fears of a recession, trade policies and tariffs and geopolitical tensions. Our inability to offset price inflation in our materials, components, shipping, or labor through increased prices to customers with long-term fixed contracts and formula-based or long-term fixed price contracts with suppliers could adversely affect our business, financial condition and results of operations. Global supply chain and labor market challenges could also negatively affect our performance as well as the performance of our suppliers. Interest rate increases have also created financial market volatility and could further negatively impact financial markets, lead to an economic downturn or recession or have an adverse effect on our operating results. Economic slowdowns can also negatively impact municipal and state tax collections and put pressure on law enforcement budgets which may increase the risk that our customers will be unable to appropriate funds for existing or future contracts with us. In addition, geopolitical risks could affect our customers’ budgets and policies. These and other factors may adversely affect customer demand and ability to pay, cause decrease in sales, and negatively impact the realizability of our accounts and notes receivable and contract assets.

Table of Contents

To the extent demand for our products increases, our future success will be dependent upon our ability to manage our growth and to increase manufacturing production capacity.

To the extent demand for our products increases significantly in future periods, one of our key challenges will be to increase our production capacity to meet sales demand while maintaining product quality. Our primary strategies to accomplish this include introducing additional shifts, increasing the physical size of our assembly facilities, the hiring of additional production staff, and the implementation of additional customized manufacturing automation equipment. The investments we make in this equipment may not yield the anticipated labor and material efficiencies. Our inability to meet any future increase in sales demand or effectively manage our expansion could have a material adverse effect on our revenues, operating results and financial condition.

Delays in product development schedules may adversely affect our revenues and cash flows.

The development of CEDs, devices, sensors and software is a complex and time-consuming process. New products and enhancements to existing products can require long development and testing periods. Our focus on our SaaS platform also presents complex development issues. Significant delays in new product or service releases or significant problems in creating new products or services could adversely affect our business, operating results, cash flows and competitive position.

We expend significant resources in anticipation of a sale due to our lengthy sales cycle and may receive no revenue in return.

Generally, law enforcement and corrections agencies consider a wide range of issues before committing to purchase our products, including product benefits, training costs, the cost to use our products in addition to, or in place of, other products, budget constraints and product reliability, safety and efficacy. The length of our sales cycle may range from a few weeks to as long as several years. Adverse publicity surrounding our products or the safety of such products has in the past, and could in the future, lengthen our sales cycle with customers. In the past, we believe that our sales were adversely impacted by negative publicity surrounding our products or the use of our products. We may incur substantial selling costs and expend significant effort in connection with the evaluation of our products by potential customers before they place an order. If these potential customers do not purchase our products, we will have expended significant resources and received no revenue in return.

Changes in civil forfeiture laws may affect our customers’ ability to purchase our products.

Some of our customers use funds seized through civil forfeiture proceedings to fund the purchase of our products. Legislative changes could impact our customers’ ability to seize funds or use seized funds to fund purchases. Changes in civil forfeiture statutes or regulations could limit the amount of funds available to our customers, which could adversely affect the sale of our products.

Catastrophic events could materially adversely affect our business, results of operations and/or financial condition.

A disruption or failure of our systems or operations in the event of a major earthquake, weather event, fire, explosion, failure to contain hazardous materials, industrial accident, utility failure, cyber-attack, terrorist attack, public health crisis, pandemic, or other catastrophic event could cause delays in completing sales, providing services, or performing other mission-critical functions. A catastrophic event that results in the destruction or disruption of any of our critical business or information technology systems could harm our ability to conduct normal business operations and our operating results as well as expose us to claims, litigation and governmental investigations and fines.

If our backup and mitigation plans are not sufficient to minimize business disruption, our financial results could be adversely affected. We are continuously monitoring our operations and intend to take appropriate actions to mitigate the risks arising from catastrophic events, but there can be no assurances that we will be successful in doing so.

​

Table of Contents

If our security measures or those of our third-party cloud storage providers are breached and unauthorized access is obtained to customers’ data or our data, our network, data centers and service may be perceived as not being secure, customers may curtail or stop using our service and we may incur significant legal and financial exposure and liabilities.

Security breaches of Axon body worn cameras, docks, fleet vehicle cameras, signal devices and Axon Evidence and other cloud services or products could expose our clients and us to a risk of loss or misuse of data. Any security breach could result in a loss of confidence in the security of our services, damage our reputation, disrupt our business, lead to legal liability, and negatively impact our future sales.  We devote significant resources to engineer secure products and ensure security vulnerabilities are mitigated, and we require our third-party service providers to do so as well; however, security breaches that have not had a material effect on our business or our third-party service providers have occurred and will continue to occur, including as a result of third-party action, employee error, and malfeasance or otherwise.  Remote-work arrangements may also make our systems and employees more susceptible to attack. Breaches could occur during transfer of data-to-data centers or at any time, and result in unauthorized physical or electronic access to our data or our customers’ data. Third parties may attempt to fraudulently induce employees or customers into disclosing sensitive information such as usernames, passwords or other information in order to gain access to our data or our customers’ data. Additionally, hackers may develop and deploy viruses, worms, and other malicious software programs that attack or gain access to our networks and data centers. Increasing socioeconomic and political instability in some countries has heightened these risks. In addition, retaliatory acts by Russia in response to Western sanctions could include cyber-attacks that could directly or indirectly impact our operations.

​

Because the techniques used to obtain unauthorized access, or to sabotage systems, change frequently, grow more complex over time, and generally are not recognized until launched against a target, we may be unable to anticipate these techniques or to implement adequate preventative measures. Moreover, our security measures and those of our third-party service providers or customers may not detect such security breaches if they occur. Although we have developed systems and processes that are designed to protect our data and user data, to prevent data loss, and to prevent or detect security breaches, we cannot assure that such measures will provide absolute security, and we may incur significant costs in protecting against or remediating cyber-attacks.

A security breach could expose us to a risk of loss or inappropriate use of proprietary and sensitive data, or the denial of access to this data. A real or perceived security breach could also result in a loss of confidence in the security of our service, disrupt our business, damage our reputation, lead to legal liability, negatively impact our future sales and significantly harm our growth prospects, operating results and financial condition.

Defects or disruptions in our services could impact demand for our services and subject us to substantial liability.

We currently serve our Axon Evidence customers from third-party cloud storage providers based in the U.S. and other countries. Interruptions in our service, or loss or corruption of digital evidence, may reduce our revenue, cause us to issue credits or pay penalties, cause customers to file litigation against us, cause customers to terminate their subscriptions and adversely affect our renewal rates and our ability to attract new customers. Our business will also be harmed if our customers and potential customers believe our service is unreliable.

Since our customers use our services for important aspects of their operations, any errors, defects, disruptions in service or other performance problems could hurt our reputation and may damage our customers’ operations. As a result, customers could elect to not renew our services or delay or withhold payment to us. We could also lose future sales or customers may make warranty or other claims against us, which could result in an increase in our warranty expense, an increase in collection cycles for and decline in the collectability of accounts receivable, and an increase in the expense and risk of litigation.

Defects in our products could reduce demand for our products or result in product recalls and result in a loss of sales, delay in market acceptance and damage to our reputation.

Complex components and assemblies used in our products may contain undetected defects that are subsequently discovered at any point in the life of the product. Defects in our products could result in a loss of sales, delay in market

Table of Contents

acceptance, damage to our reputation and increased warranty costs, which could adversely affect our business, financial results and competitive position.

Additionally, we are subject to the U.S. Consumer Products Safety Act of 1972, as amended by the Consumer Product Safety Improvement Act of 2008, which empowers the Consumer Products Safety Commission to exclude from the market products that are found to be unsafe or hazardous, and similar laws under foreign jurisdictions. Under certain circumstances, the Consumer Products Safety Commission or comparable foreign agency could require us to repurchase or recall one or more of our products. If we were required to remove, or we voluntarily remove, our products from the market, our reputation could be tarnished, and we might have large quantities of finished products that we could not sell.

Our international operations expose us to additional risks that could harm our business, operating results, and financial condition.

Our international operations are significant, and we plan to continue to grow internationally by acquiring existing entities or setting up new legal entities in new markets. In certain international markets, we have limited operating experience and may not benefit from any first-to-market advantages or otherwise succeed. In addition to risks described elsewhere in this section, our international operations expose us to other risks, including the following:

Additionally, changes in international local political, economic, regulatory, tax, social, and labor conditions may adversely harm our business and compliance with complex foreign and U.S. laws and regulations that apply to our international operations increases our cost of doing business. These numerous and sometimes conflicting laws and regulations include, among others, environmental regulations, internal control and disclosure rules, privacy and data protection requirements, anti-corruption laws, such as the U.S. Foreign Corrupt Practices Act, and other local laws prohibiting corrupt payments to governmental officials, and competition regulations, among others.

Violations of these laws and regulations could result in fines and penalties, criminal sanctions against us, our officers, or our employees, prohibitions on the conduct of our business and on our ability to offer our products and services in one or more countries, and could also materially adversely affect our brand, our international growth efforts, our ability to attract and retain employees, our business, and our operating results. Although we have implemented policies and procedures designed to ensure compliance with these laws and regulations, there can be no assurance that our employees, contractors, or agents will not violate our policies.

We depend on our ability to attract and retain our key management, sales and technical personnel.

Our success depends upon the continued service of our key management personnel. Our success also depends on our ability to continue to attract, retain and motivate qualified technical employees. Although we have employment agreements with our officers and other members of our executive management team, the employment of such persons is “at-will” and either we or the employee can terminate the employment relationship at any time, subject to the

Table of Contents

applicable terms of the employment agreements. In particular, we expect to continue to face significant challenges in hiring personnel, particularly for engineering talent, whether as a result of competition with other companies or other factors.

We have unique equity incentives designed to attract and retain long-term employees. We utilize these plans to align pay and performance and drive shareholder returns while reducing near-term cash expenditures. Our equity incentives and ongoing stock and option grants are subject to having sufficient shares under our stock plan and any new plans or increases in the number of shares available for grant under existing plans must be approved by our shareholders. If we are unable to obtain shareholder approval, we may be unable to attract and retain top talent. Our ability to attract, retain, and motivate employees may also be adversely affected by stock price volatility. The loss of the service of one or more of our key personnel could adversely impact our business, prospects, financial condition and operating results.

If we fail to comply with federal, state or local regulations applicable to our firearm product, TASER 10, we may be subject to governmental actions or litigation which could materially harm our business, operating results, and financial condition.

TASER 10 is primarily regulated by the ATF, which licenses the manufacture, sale, and import of firearms in the United States.  The primary federal laws are the National Firearms Act of 1934, or NFA, the Gun Control Act of 1968, or GCA, and the Firearms Owners’ Protection Act of 1986, or FOPA, which have been amended from time to time. 

The ATF conducts periodic audits of our Arizona facilities which hold federal firearms licenses. If we fail to comply with ATF rules and regulations, the ATF may limit our TASER 10 activities or growth, fine us, or, ultimately, suspend our ability to produce and sell the TASER 10 product line. There are also various state laws, regulations, and local ordinances relating to firearm characteristics, features, and sales. Axon and local distributors must comply with state and local laws, regulations, and ordinances pertaining to firearm and magazine sales in the jurisdictions where TASER 10 is sold. Additionally, certain TASER 10 components are regulated for import into the U.S. by ATF and are subject to ATF import permits which limits Axon’s ability to source from some suppliers leading to a potential decrease in supply chain agility. Supply chain constraints or an inability to source TASER 10 components could have a material adverse affect on our business, prospects, financial condition and operating results. 

Federal and state legislatures frequently consider legislation relating to the regulation of firearms, including the amendment or repeal of existing legislation. Existing laws may also be affected by future judicial rulings and interpretations. These possible changes to existing legislation or the enactment of new legislation may seek to restrict the makeup of a firearm, mandate the use of certain technologies in a firearm, remove existing legal defenses in lawsuits, set minimum age limits to purchase certain firearms, or ban the sale and, in some cases, the ownership of various types of firearms and accessories. Such restrictions or bans could have a material adverse affect on our business, prospects, financial condition and operating results

If we fail to maintain effective internal control over financial reporting or identify a material weakness or significant deficiency in our internal control over financial reporting, our ability to report our financial condition and results of operations in a timely and accurate manner could be adversely affected, investor confidence in our company could diminish, and the value of our common stock may decline.

​

Preparing our consolidated financial statements involves a number of complex manual and automated processes, which are dependent upon individual data input or review and require significant management judgment. One or more of these processes may result in errors that may not be detected and could result in a material misstatement or other errors of our consolidated financial statements. Such errors may be more likely to occur when implementing new systems and processes, particularly when implementing evolving and complex accounting rules. The Sarbanes-Oxley Act of 2002 (the “Sarbanes-Oxley Act”) requires, among other things, that as a publicly-traded company we disclose whether our internal control over financial reporting and disclosure controls and procedures are effective.

​

A material weakness is a deficiency, or combination of deficiencies, in internal control over financial reporting, such that there is a reasonable possibility that a material misstatement of our annual or interim financial statements

Table of Contents

will not be prevented or detected on a timely basis. While we continually undertake steps to improve our internal control over financial reporting as our business changes, we may not be successful in making the improvements and changes necessary to be able to identify and remediate control deficiencies or material weaknesses on a timely basis. For example, we identified a material weakness in our internal controls over revenue recognition and the reporting of deferred revenue for the year ended December 31, 2022 which we are working to remediate as further discussed in Item 9A. Controls and Procedures. If we are unable to successfully remediate any current or future material weaknesses in our internal control over financial reporting, the accuracy and timing of our financial reporting may be adversely affected; our liquidity, access to capital markets and perceptions of our creditworthiness may be adversely affected; we may be unable to maintain compliance with securities laws, stock exchange listing requirements and debt instruments covenants regarding the timely filing of periodic reports; we may be subject to regulatory investigations and penalties; investors may lose confidence in our financial reporting; we may suffer defaults under our debt instruments; and our stock price may decline.

​

Financial Risks

An increasing percentage of our revenue is derived from subscription billing arrangements which may result in delayed cash collections and may increase customer credit risk on receivables and contract assets.

Our strategy includes continuing to shift an increasing amount of our business to a subscription model, to better match the municipal budgeting process of our customers as well as to allow for multiple product offerings to be bundled into existing subscriptions. This is in contrast to a traditional CED sale in which the entire amount being charged for the hardware is invoiced upon shipment. This impacts liquidity in a commensurate fashion, with the cash for the subscription or installment purchase received in multiple installments rather than up front. While we record an estimate of expected credit losses and perform ongoing reviews of trade accounts receivables, if we become aware of information related to the creditworthiness of a major customer, or if future actual default rates on receivables in general differ from those currently anticipated, we may have to adjust our expected credit loss reserve, which could adversely affect our business, financial condition or operating results.

We may experience a decline in gross margins due to a shift in product sales to software and sensors products and services which may continue to carry a lower gross margin than that of Tasers.

We continue to invest in the growth of the Software and Sensors segment, and this expected growth may result in a higher percentage of total revenues being comprised of Software and Sensors products and services. In 2022, gross margin as a percentage of net sales for the Software and Sensors segment was 59.5% while it was 63.3% for the TASER segment, and may continue to be lower in the future thus decreasing our consolidated gross margin.

SaaS revenue for Axon Evidence is recognized over the terms of the contracts, which may be several years, and, as such, trends in new business may not be immediately reflected in our operating results.

Our SaaS service revenue is generally recognized ratably over the terms of the contracts, which generally range from one to ten years. As a result, most of the SaaS revenue we report each quarter is the result of agreements entered into during previous quarters. Consequently, current trends, whether positive or negative, in this portion of our business may not be fully reflected in our revenue results for several periods.

Most of our end-user customers are subject to budgetary and political constraints that may delay or prevent sales.

Most of our end-user customers are government agencies. These agencies often do not set their own budgets and therefore, have limited control over the amount of money they can spend. In addition, these agencies experience political pressure that may dictate the manner in which they spend money. As a result, even if an agency wants to acquire our products, it may be unable to purchase them due to budgetary or political constraints, particularly in challenging economic environments. There can be no assurance that the economic, budgeting or political issues will not worsen and adversely impact sales of our products. Some government agency orders may also be canceled or substantially delayed due to budgetary, political or other scheduling delays, which frequently occur in connection with the acquisition of products by such agencies, and such cancellations may accelerate or be more severe than we have

Table of Contents

experienced historically. Federal agencies may be particularly impacted by governmental impasse regarding continued government funding and debt limit constraints.

Due to municipal government funding rules, certain of our contracts are subject to appropriation, termination for convenience, or similar cancellation clauses, which could allow our customers to cancel or not exercise options to renew contracts in the future.

Although we have entered into contracts for the delivery of products and services in the future and anticipate the contracts will be completed, if agencies do not appropriate money in future year budgets, terminate contracts for convenience or if other cancellation clauses are invoked, revenue and cash associated with these bookings will not ultimately be recognized, and could result in a reduction to bookings and revenue.

We maintain most of our cash balances, some of which are not insured, at three depository institutions.

We maintain the majority of our cash and cash equivalents accounts at three depository institutions. As of December 31, 2022, the aggregate balances in such accounts at these three institutions were $139.9 million. Our balances with these institutions regularly exceed Federal Deposit Insurance Corporation insured limits for domestic deposits and various foreign deposit insurance programs covering our deposits in Australia, Canada, Finland, France, Germany, Hong Kong, India, Italy, the Netherlands, Spain, the United Kingdom, and Vietnam.

We could suffer losses with respect to the uninsured balances if the depository institutions failed and the institution’s assets were insufficient to cover its deposits and/or the governments did not take actions to support deposits in excess of existing insurance limits. Any such losses could have a material adverse effect on our liquidity, financial condition and results of operations.

Stock transactions may have a material, unpredictable impact on our results of operations and may result in dilution to existing shareholders.

We have historically granted and expect to continue to grant stock-based compensation to key employees and non-employee directors as a means of attracting and retaining highly qualified personnel. All stock-based awards are required to be recognized in our financial statements based on their grant date fair values. The amount recognized for stock compensation expense could vary depending on a number of assumptions or changes that may occur.

Changes in the subjective and probability-based assumptions can materially affect the estimates of the fair value of the awards and timing of recognition of stock-based compensation expense and consequently, the related amount recognized in our statements of operations and comprehensive income.

If we achieve specific operational goals and the covered employees complete the requisite service conditions for the performance-based awards with multiple service, performance, and market conditions, including our CEO Performance Award and our eXponential Stock Performance Plan ("XSPP"), we will recognize stock compensation expense regardless of whether the market conditions are achieved and the underlying tranches vest.

As we continue to mature, the incentives to attract, retain, and motivate employees provided by our equity awards or by future arrangements may not be as effective as in the past. We may also issue equity securities to pay for acquisitions and grant stock-based awards to retain the employees of acquired companies. If we issue significant equity to attract additional employees, to retain our existing employees, or related to acquisitions, we could incur substantial additional share-based compensation expense and the ownership of our existing stockholders would be further diluted.

Our financial performance is subject to risks associated with changes in the value of the U.S. dollar versus local currencies.

For current and potential international customers whose contracts are denominated in U.S. dollars, the relative change in local currency values creates relative fluctuations in our product pricing. These changes in international end-user costs may result in lost orders and reduce the competitiveness of our products in certain foreign markets. Additionally, intercompany sales to our non-U.S. dollar functional currency international subsidiaries are transacted

Table of Contents

in U.S. dollars which could increase our foreign exchange rate risk caused by foreign currency transaction gains and losses.

For non-U.S. dollar denominated sales, weakening of foreign currencies relative to the U.S. dollar generally leads us to raise international pricing, potentially reducing demand for our products. Should we decide not to raise local prices to fully offset the dollar’s strengthening, the U.S. dollar value of our foreign currency denominated sales and earnings would be adversely affected. We do not currently engage in hedging activities. Fluctuations in foreign currency could result in a change in the U.S. dollar value of our foreign denominated assets and liabilities including accounts receivable. Therefore, the U.S. dollar equivalent collected on a given sale could be less than the amount invoiced causing the sale to be less profitable than contemplated.

We also import selected components which are used in the manufacturing of some of our products. Although our purchase orders are generally in U.S. dollars, weakness in the U.S. dollar could lead to price increases for the components.

Unanticipated changes in our effective tax rate and additional tax liabilities may impact our operating results.

We are subject to income taxes in the U.S. and various jurisdictions outside of the U.S. Our effective tax rate could fluctuate due to changes in the mix of earnings and losses in countries with differing statutory tax rates. Our tax expense could also be impacted by changes in non-deductible expenses, changes in excess tax benefits related to exercises of stock options and vesting of restricted stock units, changes in the valuation of deferred tax assets and liabilities and our ability to utilize them, the applicability of withholding taxes, and changes in our liability for unrecognized tax benefits.

We are subject to potential tax examinations in multiple jurisdictions. While we regularly evaluate new information that may change our judgment resulting in recognition, derecognition or change in measurement of a tax position taken, there can be no assurance that the final determination of any examinations will not have an adverse effect on our operating results and financial position.

Our tax provision could also be impacted by changes in federal, state or international tax laws including fundamental tax law changes applicable to corporate multinationals, including proposals by the current U.S. president.

Additionally, we may be subject to additional tax liabilities due to changes in non-income-based taxes resulting from changes in federal, state, city or international tax laws, changes in taxing jurisdictions’ administrative interpretations, decisions, policies, and positions, results of tax examinations, settlements or judicial decisions, changes in accounting principles, changes to the business operations, including acquisitions, as well as the evaluation of new information that results in a change to a tax position taken in a prior period.

Our revenues and operating results may fluctuate unexpectedly from quarter-to-quarter, which may cause our stock price to decline.

Our revenues and operating results have varied significantly in the past and may vary significantly in the future due to various factors, including, but not limited to:

Table of Contents

As a result of these and other factors, we believe that period-to-period comparisons of our operating results may not be meaningful in the short term, and our performance in a particular period may not be indicative of our performance in any future period.

Legal and Compliance Risks

We may face personal injury, wrongful death, product liability and other liability claims that harm our reputation and adversely affect our sales and financial condition.

Our CED products are often used in aggressive confrontations that may result in serious, permanent bodily injury or death to those involved. Our CED products may be associated with these injuries. A person, or the family members of a person, injured or killed in a confrontation or otherwise in connection with the use of our products, may bring legal action against us to recover damages on the basis of theories including wrongful death, personal injury, negligent design, defective product, product performance issues, or inadequate warnings or training. We are currently subject to a number of such lawsuits and we have been subject to significant adverse judgments and settlements. We may also be subject to lawsuits involving allegations of criminal misuse of our products. We have no control over how our products and services are used by our customers or other end-users and cannot assure they are used consistent with our specifications and design. While our products are designed to be non-lethal, we cannot guarantee they will be used in a manner consistent with our intent and any such use exposes us to litigation, reputational harm and controversy. If successful, wrongful death, personal injury, misuse and other claims could have a material adverse effect on our operating results and financial condition and could result in negative publicity about our products. Similar to product liability claims, we face exposure to class action lawsuits related to the performance, safety, or advertising of our products. Such class action lawsuits could also result in substantial monetary judgments, injunctions related to the sale of products, and potentially harm our reputation.

Although we maintain product liability insurance in amounts that we believe are reasonable, we may not be able to maintain such insurance on acceptable terms, if at all, and product liability claims may exceed the amount of insurance coverage available to us. Because we manufacture and sell CEDs, insurance carriers may decide not to insure our products or our company in the future. We incur significant legal expenses in defending these cases, and significant litigation could also result in a diversion of management’s attention and resources, negative publicity and a potential award of monetary damages in excess of our insurance coverage. The outcome of any litigation is inherently uncertain and there can be no assurance that our existing or any future litigation will not have a material adverse effect on our business, financial condition or operating results.

Other litigation, government inquiries and regulatory actions may subject us to significant costs and judgments and divert management attention from our business.

We have been or could in the future be involved in numerous other litigation, government inquiries and regulatory matters relating to our products, employees, contracts and business relationships, including litigation against persons whom we believe have infringed on our intellectual property, infringement litigation filed against us, litigation against a competitor, enforcement actions filed against us, and litigation involving the U.S. Federal Trade Commission (FTC).

Such matters have resulted, and are expected to continue to result in, substantial costs to us, including in the form of attorneys’ fees and costs, damages, fines or other penalties, whether pursuant to a judgment or settlement, and diversion of our management’s attention, which could adversely affect our business, financial condition or operating results. There is also a risk of adverse judgments, as the outcome of litigation is inherently uncertain.

Table of Contents

We have been, and may be in the future, subject to intellectual property infringement and other claims, which could incur substantial litigation costs, result in significant damage awards, inhibit our use of certain technologies, and divert management attention from our business.

Many companies own intellectual property rights that are directly or indirectly related to public safety technologies. These companies periodically demand licensing agreements or engage in litigation based on allegations of infringement or other violations of their patents, trademarks, copyrights, or trade secrets. Non-practicing entities also have patents they have been granted or otherwise acquired, including patents that are directly or indirectly related to public safety technologies. These entities may seek compensation for perceived infringement of their patents, including by filing claims against us, independent of the merit of any such claims. As we enter new markets, expand into new product categories, and otherwise offer new products, services, and technologies, additional intellectual property claims may be filed against us by these companies, entities, and other third parties. Intellectual property claims may also be filed against us as our current products, services, and technologies gain additional market share.

If our products, services, or technologies were found to infringe a third-party’s proprietary rights, we could be forced to discontinue use of the protected technology or enter into costly royalty or licensing agreements in order to be able to sell our products. Such royalty and licensing agreements may not be available on terms acceptable to us or at all. We could also be required to pay substantial damages, fines or other penalties, indemnify customers or distributors, cease the manufacture, use, or sale of infringing products or processes, make proprietary source code publicly available, and/or expend significant resources to develop or acquire non-infringing technologies. Our suppliers may not provide, or we may not be able to obtain, intellectual property indemnification sufficient to offset all damages, fines or other penalties resulting from any claims of intellectual property infringement brought against us or our customers. There is no guarantee that our use of conventional technology searching and brand clearance searching will identify all potential rights holders. Rights holders may demand payment for past infringements and/or force us to accept costly license terms or discontinue use of protected technology and/or works of authorship that may include, for example, photos, videos, and software. Our current research and development focus on developing software-based products, including that which is related to artificial intelligence or virtual reality, increases this risk.

If we are unable to protect our intellectual property, the value of our brands and products may decrease and we may lose our competitive market advantage.

Our future success depends upon our proprietary technology. Our protective measures for this proprietary technology include patents, trademarks, copyrights, and trade secret protection. However, these protective measures, as well as our efforts to pursue such protective measures, may prove inadequate. For example, the value of intellectual property protection in certain countries may not be apparent until after such protection can no longer be pursued. As such, our intellectual property protection may not extend to all countries in which our products are distributed or will be distributed in the future. Though we work to protect our innovations, we may not be able to obtain protection for certain innovations. For example, we may be unable to patent some software-based products. The scope of any patent protection we have obtained, or may obtain, may not prevent others from developing and selling competing products. Despite our efforts, any intellectual property protection we obtain may be later determined to be insufficient or ineffective.

Our protective measures may prove inadequate for reasons outside of our control. Varying intellectual property laws across countries may lead to differences in protection between such countries. In certain countries in which our products are distributed, the ability to effectively enforce intellectual property rights may not exist. Patent requirements differ by country and certain domestic or foreign laws may prohibit us from satisfying these requirements, creating a risk that some of our international patents may become unenforceable. Patents for older technologies, such as those first introduced in our M26 and X26 models of CEDs, have expired or will expire due to statutory limits on patent term. Despite policies and efforts to maintain secrecy, trade secrets and other confidential information, such information could be compromised by employees, partners, or other third parties.

Once established, there is no guarantee that our intellectual property rights will remain in force. Issued patents may be re-examined and subsequently ruled invalid or unenforceable. Our registered trademarks may also be diminished or lost. For example, there is a risk that our “TASER” trademark could become synonymous with the general product category of “conducted energy devices”. The right to stop others from misusing our trademarks and

Table of Contents

service marks in commerce depends, to some extent, on our ability to show evidence of enforcement of our rights against such misuse in commerce. Our efforts to stop improper use, if ineffective, may lead to loss of trademark and service mark rights, brand loyalty and notoriety among our customers and prospective customers.

Our intellectual property may also be at risk if we are unable to defend against enforcement actions, such as that filed by the FTC regarding our acquisition of Vievu LLC from Safariland LLC on May 3, 2018. For additional discussion of this matter, refer to Note 13 to the consolidated financial statements included in Part II, Item 8 of this Annual Report on Form 10-K. If successful, the FTC is seeking a divestiture of Vievu along with Axon assets sufficient to stand up a viable competitor.

Inability to protect our intellectual property could negatively impact our commercial efforts and competitive market advantage. Regardless of outcome, the prosecution of patent and other intellectual property claims is both costly and time consuming. Unauthorized use of our proprietary technology could divert our management’s attention from our business, and could result in a material adverse effect on our business, financial position, and operating results.

We may be limited in our ability to enforce patent rights internationally to only those jurisdictions in which our patent applications have been granted.

Our U.S. patents protect us from imported infringing products coming into the U.S. from abroad. We have made applications for patents in a few foreign countries; however, these may be inadequate to protect markets for our products in other foreign countries. Each patent is examined and granted according to the law of the country where it was filed independent of whether a U.S. patent on similar technology was granted. Certain foreign countries have patent working requirements that require a patent owner to practice a patented invention with the respective country. A patent in a foreign country may be subject to cancellation, forfeiture, compulsory license, or other penalty if the claimed invention has not been worked in that country. Meeting the requirements of working an invention differs by country and ranges from sales in the country to manufacturing in the country. U.S. export law, or the laws of some foreign countries, may prohibit us from satisfying the requirements for working the invention, creating a risk that some of our international patents may become unenforceable. In a country in which we do not have a patent or a country in which our patent in that country is unenforceable or unenforced, other companies and makers of similar products and services may be able to copy our products or features of our products without consequence, thus limiting our ability to capture market share or protect our technology, which could materially harm our growth prospects and operating results.

A variety of new and existing laws and/or interpretations could materially and adversely affect our business.

As detailed in “Item I. Business – Government Regulation” we are subject to a variety of laws and regulations in the United States and abroad that involve matters central to our business, including privacy, data protection and personal information, rights of publicity, content, intellectual property, advertising, marketing, distribution, data security, data retention and deletion, electronic contracts and other communications, competition, consumer protection, telecommunications, product liability, taxation, labor and employment, economic or other trade prohibitions or sanctions, securities law compliance, and online payment services. The introduction of new products, expansion of our activities in certain jurisdictions, or other actions that we may take may subject us to additional laws, regulations, or other government scrutiny. In addition, foreign data protection, privacy, content, competition, and other laws and regulations can impose different obligations or be more restrictive than those in the United States.

These U.S. federal and state and foreign laws and regulations, which in some cases can be enforced by private parties in addition to government entities, are constantly evolving and can be subject to significant change. As a result, the application, interpretation, and enforcement of these laws and regulations are often uncertain and may be interpreted and applied inconsistently from country to country and inconsistently with our current policies and practices. New laws and regulations (or new interpretations of existing laws and regulations) may require us to incur substantial costs, expose us to unanticipated civil or criminal liability, or cause us to change our business practices.

The costs of compliance with these laws and regulation are high and are likely to increase in the future. Additionally, these laws and regulations, or any associated inquiries or investigations or other government actions,

Table of Contents

may delay or impede the development of new products, result in negative publicity, require significant management time and attention, and subject us to remedies that may harm our business, including fines or demands or orders that we modify or cease existing business practices. For example, as has been reported in the press, there is a grand jury investigation being conducted by the U.S. Attorney’s Office for the Northern District of Illinois. We have fully cooperated with the investigation and continue to do so. While we conducted an extensive internal investigation into, among other things, lobbying activities, and have found no indication of any wrongdoing by any Axon employee, there can be no assurance that this matter will not harm our business.

Radio Spectrum Devices

Certain of our products utilize the radio spectrum to provide wireless voice, data and video communications services. The allocation of spectrum is regulated in the U.S. and other countries and limited spectrum space is allocated to wireless services and specifically to public safety users. We manufacture and market products in spectrum bands already made available by regulatory bodies. If current products do not comply with the regulations set forth by these governing bodies, we may be unable to sell our products or could incur penalties. Our results could be negatively affected by the rules and regulations adopted from time to time by the U.S. Federal Communications Commission (FCC) or regulatory agencies in other countries. Regulatory changes in current spectrum bands may also require modifications to some of our products so they can continue to be manufactured and marketed.

Axon body worn cameras, docks, fleet vehicle cameras and signal devices are subject to the FCC’s rules and regulations. These regulations affect CEDs with Signal technology, including the TASER 7, SPPM, and future CEDs implementing wireless technology. Compliance with government regulations could increase our operations and product costs and impact our future financial results.

Axon and TASER Devices

For our TASER products, we rely on the opinions of the ATF, including the determination that a device that does not expel projectiles by the action of an explosive is not classified as a firearm. Changes in statutes, regulations, and interpretation outside of our control may result in our products being classified or reclassified as firearms. If this were to occur, our private citizen market could be substantially reduced because consumers would be required to comply with federal, state, or local firearm transfer requirements prior to purchasing our products.

Federal regulation of sales in the U.S.: The majority of our currently offered CEDs are not classified as firearms regulated by the ATF. However, the ATF regulates TASER 10 as a firearm under the Gun Control Act of 1968 due to a technological advancement specific to the propulsion design of the TASER 10 CED’s cartridges. While this classification will have little impact on Axon’s ability to sell TASER 10 to law enforcement and government entities, our private citizen and enterprise market could be substantially reduced because non-governmental end-users would be required to comply with federal, state, or local firearm transfer requirements prior to purchasing TASER 10. Additionally, Axon must maintain a federal firearms license to manufacture and sell the TASER 10, which subjects Axon to periodic compliance inspections by the ATF. License violations discovered by the ATF can result in fines, penalties, warning letters or license revocation, leading to disruptions in operations.

Our CED products are also subject to testing, safety and other standards by organizations such as the American National Standards Institute, the International Electrotechnical Commission, the National Institute of Standards and Technology, and Underwriters Laboratories. These regulations also affect CEDs with Axon Signal technology, including Signal Performance Power Magazine technology, and TASER 7 battery packs.

Federal regulation of international sales: Our CEDs are considered a “crime control” product by the U.S. Department of Commerce (DOC) for export directly from the U.S. which requires us to obtain an export license from the DOC for the export of our CED devices from the U.S. to any country other than Canada. Future products and services may require classifications from the DOC before they may be shipped internationally. Our inability to obtain DOC export licenses or classifications on a timely basis for sales of our products to our international customers could significantly and adversely affect our international sales. Although TASER 10 is regulated by the ATF for domestic sales, the U.S. DOC has ruled that the product’s unique propulsion design has no impact on its export classification and that the TASER 10 model’s export classification remains consistent with all other TASER CED models.

Table of Contents

Federal regulation of foreign national employees: Our CED development and production is also considered controlled “technology” by the U.S. DOC and is categorized as a “deemed export” for any foreign national employees exposed to the technology within the U.S. Consequently, we must obtain export licenses from the DOC for any deemed export within the U.S. made to a foreign national employee exposed to the deemed controlled technology. Deemed export licenses are subject to DOC approvals and issued licenses require annual status reports for the stated employees. Inability to obtain proper licensing could curtail the company’s ability to execute R&D and production related to CED technology.

State and local regulation: Our CEDs are controlled, restricted or, less frequently, prohibited by some state and local governments. Other jurisdictions may ban or restrict the sale of our TASER-branded devices, or restrict their use through changes to use-of-force laws or regulations, and our product sales may be significantly affected by additional state, county and city governmental regulation. The change in TASER 10’s propulsion design may impact how TASER 10 is regulated at the state and/or local level depending on each state’s firearm laws.

International regulation of foreign imports and sales: Certain jurisdictions prohibit, restrict, or require a permit for the importation, sale, possession or use of CEDs, including in some countries by law enforcement agencies, limiting our international sales opportunities.

U.S. and International regulation of component movements globally: We rely on a global supply chain of components across our product lines with most final assembly occurring in the U.S. Export of these components from abroad is subject to shifting regulatory landscapes imposed by both the foreign government and U.S. authorities upon import. Abrupt changes to these regulations can result in delays or interruptions to final product supplies. Additionally, ATF regulation of certain imports of TASER 10 components may limit Axon’s supply chain agility.

International regulation of foreign-based operations: We maintain foreign operations in several countries globally for purposes of logistics, sales, general and administrative, and R&D support. Any failure to properly maintain or license could limit our ability to sell, support, or develop our products and services both internationally and in the U.S. market.

Environmental Regulations

We are subject to various state, federal and international laws and regulations governing the environment, including restricting the presence of certain substances in our products and making us financially responsible for the collection, treatment, recycling and disposal of such products. In addition, further environmental or climate change disclosure legislation may be enacted in other jurisdictions, including the U.S. (under federal and state laws) and other countries, the cumulative impact of which could be significant. New, or changes in, environmental safety laws, regulations or rules could also lead to increased costs of compliance, including remediations of any discovered issues, and changes to our operations, which may be significant. Any failures to comply could result in significant expenses, delays, or fines.

Privacy Regulations

We are subject to various risks and costs associated with the collection, processing, storage and transmission of personally identifiable information and other sensitive and confidential information. This data is wide ranging and relates to our employees, customers, third parties, and the subjects of law enforcement. Our compliance obligations include laws and regulations that dictate whether, how, and under what circumstances we can transfer, process and/or receive and hold certain data that is critical to our operations, including data shared between countries or regions in which we operate and data shared among our products and services. If one or more of the legal mechanisms for transferring data from other countries to the U.S. is invalidated, if we are unable to transfer data between and among countries and regions in which we operate, or if we are prohibited from sharing data among our products and services, it could affect the manner in which we provide our services or adversely affect our financial results. Countries may also pass legislation implementing data protection requirements or requiring local storage and processing of data or similar requirements that could increase the cost and complexity of delivering our services and expose us to significant penalties for non-compliance. We are also subject to U.S. laws and regulations, including, without limitation, the California Privacy Rights Act, which provides for enhanced consumer protections for California residents, a private

Table of Contents

right of action for data breaches and statutory fines and damages for data breaches or other California Consumer Privacy Act violations, as well as a requirement of “reasonable” cybersecurity.

Any inability, or perceived inability, by us to adequately address privacy concerns, or comply with applicable laws, regulations, policies, industry standards and guidance, contractual obligations, or other legal obligations, even if unfounded, could result in significant regulatory and third party liability, increased costs, disruption of our business and operations, and a loss of confidence and other reputational damage. Furthermore, as new privacy- related laws and regulations are implemented, the time and resources needed for us to comply with such laws and regulations continues to increase and become a significant compliance workstream.

Our business is subject to evolving corporate governance and public disclosure regulations and expectations, including with respect to environmental, social and governance matters, that could expose us to numerous risks.

We are subject to changing rules and regulations promulgated by a number of governmental and self-regulatory organizations, including the SEC, the Nasdaq Stock Market and the Financial Accounting Standards Board. These rules and regulations continue to evolve in scope and complexity and many new requirements have been created in response to laws enacted by Congress, making compliance more difficult and uncertain. In addition, increasingly regulators, customers, investors, employees and other stakeholders are focusing on environmental, social and governance (“ESG”) matters and related disclosures. These changing rules, regulations and stakeholder expectations have resulted in, and are likely to continue to result in, increased general and administrative expenses and increased management time and attention spent complying with or meeting such regulations and expectations. For example, developing and acting on initiatives within the scope of ESG, and collecting, measuring and reporting ESG related information and metrics can be costly, difficult and time consuming and is subject to evolving reporting standards, including the SEC’s recently proposed climate-related reporting requirements, and similar proposals by other international regulatory bodies. We may also communicate certain initiatives and goals, regarding environmental matters, diversity, responsible sourcing and social investments and other ESG related matters, in our SEC filings or in other public disclosures. These initiatives and goals within the scope of ESG could be difficult and expensive to implement, the technologies needed to implement them may not be cost effective and may not advance at a sufficient pace, and we could be criticized for the accuracy, adequacy or completeness of the disclosure. Further, statements about our ESG related initiatives and goals, and progress against those goals, may be based on standards for measuring progress that are still developing, internal controls and processes that continue to evolve, and assumptions that are subject to change in the future. In addition, we could be criticized for the scope or nature of such initiatives or goals, or for any revisions to these goals. If our ESG-related data, processes and reporting are incomplete or inaccurate, or if we fail to achieve progress with respect to our goals within the scope of ESG on a timely basis, or at all, our reputation, business, financial performance and growth could be adversely affected.

Risks Related to our Convertible Notes

Servicing our debt requires a significant amount of cash, and we may not have sufficient cash flow from our or their businesses to pay our substantial debt.

As of December 31, 2022, we had outstanding an aggregate principal amount of $690.0 million of our 0.50% Convertible Senior Notes due 2027 (the “Notes”). Our ability to make scheduled payments of the principal of, to pay interest on or to refinance our indebtedness, including the notes, depends on our future performance, which is subject to economic, financial, competitive and other factors beyond our control. Our businesses may not continue to generate cash flow from operations in the future sufficient to service our debt and make necessary capital expenditures. If we are unable to generate such cash flow, we may be required to adopt one or more alternatives, such as selling assets, restructuring debt or obtaining additional equity capital on terms that may be onerous or highly dilutive. Our ability to refinance our indebtedness will depend on the capital markets and our financial condition at such time. We may not be able to engage in any of these activities or engage in these activities on desirable terms, which could result in a default on our debt obligations, including the notes.

Table of Contents

The conditional conversion feature of the Notes, if triggered, may adversely affect our financial condition and operating results.

In the event the conditional conversion feature of the Notes is triggered, holders of Notes will be entitled to convert their Notes at any time during specified periods at their option. If one or more holders elect to convert their Notes, we would be required to settle any converted principal amount of such Notes through the payment of cash, which could adversely affect our liquidity. In addition, even if holders do not elect to convert their Notes, we could be required under applicable accounting rules to reclassify all or a portion of the outstanding principal of the Notes as a current, rather than long-term, liability, which would result in a material reduction of our net working capital.

Conversion of the Notes may dilute the ownership interest of our stockholders or may otherwise depress the price of our common stock.

The conversion of some or all of the Notes may dilute the ownership interests of our stockholders. Upon conversion of the Notes, we have the option to pay or deliver, as the case may be, cash, shares of our common stock, or a combination of cash and shares of our common stock in respect of the remainder, if any, of our conversion obligation in excess of the aggregate principal amount of the Notes being converted. If we elect to settle the remainder, if any, of our conversion obligation in excess of the aggregate principal amount of the Notes being converted in shares of our common stock or a combination of cash and shares of our common stock, any sales in the public market of our common stock issuable upon such conversion could adversely affect prevailing market prices of our common stock. In addition, the existence of the Notes may encourage short selling by market participants because the conversion of the Notes could be used to satisfy short positions, or anticipated conversion of the Notes into shares of our common stock could depress the price of our common stock.

Changes in the accounting treatment for the Notes could have a material effect on our reported financial results.

We have adopted Accounting Standards Update (“ASU 2020-06”) 2020-06 as of January 1, 2022.  Accordingly, we do not bifurcate the liability and equity components of the Notes on our balance sheet and we use the if-converted method of calculating diluted earnings per share. Under the “if-converted” method, diluted earnings per share will generally be calculated assuming that all the notes were converted solely into shares of common stock at the beginning of the reporting period, unless the result would be anti-dilutive, which could adversely affect our diluted earnings per share. Because the principal amount of the Notes upon conversion is required to be paid in cash, and only the excess is permitted to be settled in shares, the application of the if-converted method will produce a similar result as the treasury stock method prior to the adoption of ASU 2020-06. The effect of the treasury stock method is that the shares issuable upon conversion of such Notes are not included in the calculation of diluted earnings per share except to the extent that the conversion value of such Notes exceeds their principal amount. 

In accordance with ASU 2020-06, the Notes are reflected as a liability on our consolidated balance sheets, with the initial carrying amount equal to the principal amount of the Notes, net of issuance costs. The issuance costs will be treated as a debt discount for accounting purposes, which will be amortized into interest expense over the term of the Notes. As a result of this amortization, the interest expense that we expect to recognize for the Notes for accounting purposes will be greater than the cash interest payments we will pay on the Notes, which will result in lower reported income.

We cannot be sure whether future changes made to the current accounting standards related to the Notes will not have a material effect on our reported financial results.

The convertible note hedge and warrant transactions may affect the value of the Notes and our common stock.

In connection with the pricing of the Notes, we have entered into convertible note hedge transactions with the option counterparties. We have also entered into warrant transactions with the option counterparties. The convertible note hedge transactions are expected generally to reduce the potential dilution to our common stock upon any conversion of Notes and/or offset any cash payments we are required to make in excess of the principal amount of converted notes, as the case may be. However, the warrant transactions could have a dilutive effect on our common stock to the extent that the market price per share of our common stock exceeds the strike price of the warrants.

Table of Contents

In addition, the option counterparties or their respective affiliates may modify their hedge positions by entering into or unwinding various derivatives with respect to our common stock and/or purchasing or selling our common stock or other securities of ours in secondary market transactions following the pricing of the notes and prior to the maturity of the notes (and are likely to do in connection with any conversion of the Notes or redemption or repurchase of the Notes). This activity could cause or avoid an increase or a decrease in the market price of our common stock.

In addition, if any such convertible note hedge and warrant hedging transactions fail to become effective, the option counterparties or their respective affiliates may unwind their hedge positions with respect to our common stock, which could adversely affect the value of our common stock.

The potential effect, if any, of these transactions and activities on the market price of our common stock will depend in part on market conditions and cannot be ascertained at this time. Any of these activities could adversely affect the value of our common stock.

We are subject to counterparty risk with respect to the convertible note hedge transactions.

The option counterparties are financial institutions, and we will be subject to the risk that any or all of them might default under the convertible note hedge transactions. Our exposure to the credit risk of the option counterparties will not be secured by any collateral.

If an option counterparty becomes subject to insolvency proceedings, we will become an unsecured creditor in those proceedings with a claim equal to our exposure at that time under the convertible note hedge transactions with such option counterparty. Our exposure will depend on many factors but, generally, an increase in our exposure will be correlated to an increase in the market price and in the volatility of our common stock. In addition, upon a default by an option counterparty, we may suffer adverse tax consequences and more dilution than we currently anticipate with respect to our common stock. We can provide no assurances as to the financial stability or viability of the option counterparties.

​

Table of Contents

Table of Contents

Table of Contents

Stock Performance Graph

The following stock performance graph compares the performance of our common stock to the NASDAQ Composite Index, Russell 2000 Index, Russell Midcap Index, and S&P 500 Index.

The graph covers the period from December 31, 2017 to December 31, 2022. The graph assumes that the value of the investment in our stock and in each index was $100 at December 31, 2017, and that all dividends were reinvested. We do not pay dividends on our common stock.

​

​

​

Note: Index data copyright NASDAQ OMX, Inc.; Russell Investments; and Standard and Poor’s, Inc. Used with permission. All rights reserved.

​

​

Item 6.    [Reserved]

​

Table of Contents

Table of Contents

Table of Contents

Within the Software and Sensors segment, we include only revenues and costs attributable to that segment which costs include: costs of sales for both products and services, direct labor, and product management and R&D for products included, or to be included, within the Software and Sensors segment. All other costs are included in the TASER segment. Sales, general and administrative expenses are reported on a consolidated basis.

For the Years Ended December 31, 2022 and 2021

Net Sales

Net sales by product line were as follows for the years ended December 31, 2022 and 2021 (dollars in thousands):

​

​

Net unit sales were as follows:

​

​

Table of Contents

Net sales for the TASER segment increased $94.6 million, or 21.7%, primarily as a result of an increase of $89.0 million in TASER 7 devices and a $28.8 million increase in cartridge revenue. The increase in TASER 7 revenue is the result of increased unit sales and higher average selling prices. We continue to see a shift to purchases of TASER 7 from legacy devices. Cartridge revenue increased due to increased unit sales and higher average selling prices due to product mix shift from legacy handles to TASER 7. Axon Evidence and cloud services revenue increased based on the increased number of TASER 7 devices in the field. Partially offsetting the increases was a decrease in revenue of legacy devices of $40.9 million. The decrease was attributable to decreased unit sales and was partially offset by higher average selling prices.

Net sales for the Software and Sensors segment increased $231.9 million, or 54.4%. Revenue from Axon Evidence and cloud services increased $125.9 million as we continued to add users to our network during the year ended December 31, 2022. The increase in the aggregate number of users and devices also resulted in increased extended warranty revenues of $16.1 million. Sales of our Axon Body 3 camera drove most of the $48.7 million increase in Axon Body revenue and the $5.6 million increase in Axon Dock revenue. Fleet revenue increased $38.7 million driven by an increase in both units and higher average selling prices, driven largely by Fleet 3.

Backlog - As of December 31, 2022 compared to December 31, 2021

Our backlog for products and services includes all orders that have been received and are believed to be firm. We define backlog as cumulative bookings, net of cancellations, less product and service revenue recognized to date. Bookings are generally realized as revenue over multiple years.

The TASER segment backlog balance was $824.4 million as of December 31, 2022. This backlog balance includes $111.0 million of deferred revenue, and $713.5 million that has been recorded as bookings but not yet invoiced, all as of December 31, 2022. We expect to realize approximately $176.8 million of the December 31, 2022 backlog balance as revenue during the next 12 months.

The Software and Sensors backlog balance was $3.8 billion as of December 31, 2022. This backlog balance includes $497.1 million of deferred revenue, and $3.3 billion that has been recorded as bookings but not yet invoiced, all as of December 31, 2022. We expect to realize approximately $780.7 million of the December 31, 2022 backlog balance as revenue during the next 12 months.

​

​

Our backlog of $4.6 billion as of December 31, 2022 has increased significantly from $2.8 billion as of December 31, 2021.

Table of Contents

Gross margin increased $187.7 million to $728.6 million for the year ended December 31, 2022 compared to $540.9 million for 2021. As a percentage of net sales, gross margin decreased to 61.2% for 2022 from 62.7% for 2021 due to a mix of low to no margin professional services revenue and increased raw materials and labor expense.

As a percentage of total segment net sales, gross margin for the TASER segment decreased to 63.3% for the year ended December 31, 2022 from 65.7% for the year ended December 31, 2021 as a result of higher direct cost of goods. Impacting higher cost of goods sold were cost increases in raw materials and increased labor expense.

Within the Software and Sensors segment, gross margin as a percentage of total segment net sales remained consistent at 59.5% for each of the years ended 2022 and 2021, respectively. Within the Software and Sensors segment, product gross margin was 42.1% for the year ended December 31, 2022 and 39.2% for the same period in 2021. The increase in product gross margin was attributable to higher average selling prices for the Axon Body 3 and Fleet 3. The service margins were 73.3% for the year ended December 31, 2022 and 74.6% for the same period in 2021. The decrease in service margins was driven by a higher mix of low margin professional service revenue in 2022.

SG&A expenses decreased $113.4 million, or 22.0%. Stock-based compensation expense decreased $187.5 million in comparison to the prior year comparable period, which was primarily attributable to a decrease of $122.9 million in expense related to the CEO Performance Award and a decrease of $83.8 million related to our XSPP. The decrease related to the vesting of ten tranches of the CEO Performance Award and nine tranches of the XSPP in 2021, which have no remaining unrecognized expense for the vested tranches, as well as no additional tranches that vested in 2022. The decrease was partially offset by increased stock-based compensation expense for time-based awards due to higher headcount.

Table of Contents

Salaries, benefits and bonus expense increased $20.9 million. Of the total increase, $32.3 million is attributable to an increase in salaries and related primarily to increased headcount. An increase in bonus expense of $10.2 million reflected incremental bonuses paid during the year to employees at the senior director level and below, as well as higher attainment on the annual company bonus performance metrics compared to 2021. Partially offsetting the increase was a decrease of $18.4 million in payroll taxes related to the vesting of nine tranches of the XSPP and the exercise of options under the CEO Performance Award in 2021; as no tranches vested in 2022, we did not recognize any payroll tax expense related to the program in 2022. Salaries, benefits and bonus expense decreased as a percentage of sales from 16.2% for 2021 to 13.5% for 2022.

Sales and marketing expenses increased $20.4 million, driven by a $16.9 million increase in commissions tied to higher revenues. Of the total increase, $3.3 million related to trade shows and seminars, as we hosted additional in-person events including our annual user conference, Axon Accelerate, in 2022.

Other SG&A expenses increased by $32.8 million, reflecting higher headcount and the following:

Within the TASER segment, R&D expenses increased $5.5 million or 11.9%. An increase of $8.3 million in salaries, benefits and bonus expense reflected higher headcount. Additionally, indirect manufacturing costs and supplies increased $3.8 million related to the development of next generation products. Partially offsetting these increases was a decrease in stock-based compensation expense of $5.7 million, due to the vesting of nine XSPP tranches during 2021, for which there is no remaining unamortized expense, as well as no additional tranches that vested in 2022.  

R&D expense for the Software and Sensors segment increased $34.3 million or 23.2% and decreased as a percentage of sales to 27.7% compared to 34.7% in the prior year. An increase of $32.2 million related to salaries, benefits, and bonus attributable to increased headcount.

Stock-based compensation expense for the Software and Sensors segment decreased $2.7 million. Contributing to the decrease was the vesting of nine XSPP tranches during 2021, for which there is no remaining unamortized expense, as well as no additional tranches that vested in 2022. Partially offsetting the decrease was an increase in general stock-based compensation expense due to an increase in headcount.

Table of Contents

Interest and Other Income, Net

Interest and other income, net was $103.3 million and $26.7 million for the years ended December 31, 2022 and 2021, respectively.

For the year ended December 31, 2022, we recorded a net unrealized gain of $131.9 million related to observable price changes for our investments in certain strategic investments and related warrants and the exercise of warrants in one of our strategic investees, which was partially offset by a $32.9 million unrealized loss on marketable securities related to our investment in CLBT. Interest and other income, net also reflected net interest income of $4.8 million and losses from foreign currency transactions of $0.9 million.

For the year ended December 31, 2021, we recorded a gain of $40.9 million related to observable price changes for our investments in certain strategic investments and related warrants. The gain was partially offset by a $17.8 million unrealized loss on marketable securities related to our investment in CLBT.  Interest and other income, net also reflected interest income of $1.7 million, other income of $0.9 million from a government grant, and gains from foreign currency transactions of $0.4 million.

Provision for Income Taxes

The provision for income taxes was an expense of $49.4 million for the year ended December 31, 2022. The effective income tax rate for 2022 was 25.1%. The benefits related to excess stock-based compensation of $4.6 million and research and development credits of $13.3 million, and a deduction for foreign derived intangible income (“FDII”) of $2.6 million were offset by the tax effects of permanently non-deductible expenses for executive compensation of $5.8 million, an increase in uncertain tax benefits of $3.2 million, and other permanently non-deductible expenses of $1.8 million. Additionally, we recorded a $10.2 million increase to our valuation allowance as of December 31, 2022 related to research and development tax credits that may not be utilized prior to expiration and an unrealized investment loss.

The provision for income taxes was a benefit of $81.4 million for the year ended December 31, 2021. The effective income tax rate for 2021 was 57.5%. The benefits related to excess stock-based compensation of $205.5 million and research and development credits of $34.4 million were partially offset by the tax effects of permanently non-deductible expenses for executive compensation of $180.5 million, an increase in uncertain tax benefits of $10.2 million, and other permanently non-deductible expenses of $1.8 million. Additionally, we recorded a $9.0 million increase to our valuation allowance as of December 31, 2021 related to research and development tax credits that may not be utilized prior to expiration and an unrealized investment loss.

Net Income

We recorded net income of $147.1 million for the year ended December 31, 2022 compared to a net loss of $60.0 million in 2021. Net income per basic share was $2.07 while diluted net income per share was $2.03, compared to net loss per basic and diluted net loss per share of $0.91 for 2021.

Table of Contents

Net unit sales were as follows:

​