UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

 

FORM 10-K

 

(Mark One)

ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended December 31, 2017

OR

TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 FOR THE TRANSITION PERIOD FROM                      TO                     

Commission File Number 001-38238

 

Restoration Robotics, Inc.

(Exact name of Registrant as specified in its Charter)

 

 

Delaware

06-1681204

(State or other jurisdiction of

incorporation or organization)

(I.R.S. Employer

Identification No.)

 

128 Baytech Drive

San Jose, CA 95134

(408) 883-6888

 

(Address, including zip code, and telephone number, including area code, of registrant’s principal executive offices)

Securities registered pursuant to Section 12(b) of the Act:

 

Title of Each Class

 

Name of Each Exchange on Which Registered

Common Stock, $0.0001 par value per share

 

The Nasdaq Stock Market, Inc.

 

Securities Registered Pursuant to Section 12(g) of the Act: None

Indicate by check mark if the Registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. YES  NO 

Indicate by check mark if the Registrant is not required to file reports pursuant to Section 13 or 15(d) of the Act. YES   NO 

Indicate by check mark whether the Registrant: (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the Registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. YES   NO 

Indicate by check mark whether the Registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the Registrant was required to submit and post such files). YES   NO 

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§229.405) is not contained herein, and will not be contained, to the best of Registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. 

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

 

Large accelerated filer

 

  

Accelerated filer

 

 

 

 

 

Non-accelerated filer

 

 (Do not check if a smaller reporting company)

  

Smaller reporting company

 

 

 

 

 

 

 

 

Emerging growth company

 

 

 

 

 

 

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act.  

Indicate by check mark whether the Registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). YES   NO 

The aggregate market value of the voting and non-voting common equity held by non-affiliates of the Registrant, based on the closing price of the shares of common stock on The Nasdaq Global Market on February 26, 2018, was $106,858,458.

The number of shares of Registrant’s Common Stock outstanding as of  December 31, 2017 was 28,940,282.

Documents to be Incorporated by Reference

Certain information required in Items 10, 11, 12, 13 and 14 of Part III of this Annual Report on Form 10-K (the "Annual Report") is incorporated by reference from our definitive Proxy Statement for our 2018 Annual Meeting of Stockholders (our "Proxy Statement") which will be filed with the Securities and Exchange Commission (the "SEC") within 120 days after the close of the fiscal year ended December 31, 2017.

 

 

 

 


 

Table of Contents

 

 

 

 

 

Page

PART I

 

 

 

 

Item 1.

 

Business

 

3

Item 1A.

 

Risk Factors

 

21

Item 1B.

 

Unresolved Staff Comments

 

55

Item 2.

 

Properties

 

55

Item 3.

 

Legal Proceedings

 

55

Item 4.

 

Mine Safety Disclosures

 

55

 

 

 

 

 

PART II

 

 

 

 

Item 5.

 

Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities

 

56

Item 6.

 

Selected Consolidated Financial Data

 

58

Item 7.

 

Management’s Discussion and Analysis of Financial Condition and Results of Operations

 

59

Item 7A.

 

Quantitative and Qualitative Disclosures About Market Risk

 

70

Item 8.

 

Consolidated Financial Statements and Supplementary Data

 

71

Item 9.

 

Changes in and Disagreements With Accountants on Accounting and Financial Disclosure

 

100

Item 9A.

 

Controls and Procedures

 

100

Item 9B.

 

Other Information

 

100

 

 

 

 

 

PART III

 

 

 

 

Item 10.

 

Directors, Executive Officers and Corporate Governance

 

101

Item 11.

 

Executive Compensation

 

101

Item 12.

 

Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters

 

101

Item 13.

 

Certain Relationships and Related Transactions, and Director Independence

 

101

Item 14.

 

Principal Accounting Fees and Services

 

101

 

 

 

 

 

PART IV

 

 

 

 

Item 15.

 

Exhibits, Consolidated Financial Statement Schedules

 

102

 

 

Signatures

 

106

 

 

i


 

CAUTIONARY INFORMATION REGARDING FORWARD-LOOKING STATEMENTS

This Annual Report on Form 10-K for the year ended December 31, 2017 contains forward-looking statements concerning our business, operations, and financial performance and condition as well as our plans, objectives, and expectations for business operations and financial performance and condition. Any statements contained herein that are not of historical facts may be deemed to be forward-looking statements. In some cases, you can identify these statements by words such as “anticipate,” “assume,” “believe,” “could,” “estimate,” “expect,” “intend,” “may,” “plan,” “should,” “will,” “would,” and other similar expressions that are predictions of or indicate future events and future trends. These forward-looking statements include, but are not limited to, statements about:

 

the continued growth in demand for our ARTAS Robotic System, or ARTAS, for use in harvesting hair follicles for transplant;

 

our commercialization, marketing and manufacturing capabilities, plans and prospects;

 

the continuing productivity and effectiveness of our commercial infrastructure and salesforce;

 

our financial performance;

 

our intentions and our ability to establish collaborations and/or partnerships;

 

the timing or likelihood of regulatory filings and approvals for ARTAS for use in recipient site making or transplanting of hair follicles, and expanding the approved use of ARTAS for use in dissecting hair follicles to include women and individuals without straight brown or black hair;

 

our expectations regarding the potential market size and the size of the patient populations for ARTAS;

 

the effective pricing of ARTAS;

 

the implementation of our business model and strategic plans for our business and technology;

 

the scope of protection we are able to establish and maintain for intellectual property rights covering ARTAS, along with any product enhancements;

 

estimates of our expenses, future revenue, capital requirements, our needs for additional financing and our ability to obtain additional capital; and

 

developments and projections relating to our competitors and our industry, including competing therapies and procedures.

These forward-looking statements are based on current expectations, estimates, forecasts, and projections about our business and the industry in which we operate and management's beliefs and assumptions and are not guarantees of future performance or development and involve known and unknown risks, uncertainties, and other factors that are in some cases beyond our control. As a result, any or all of our forward-looking statements in this Annual Report on Form 10-K may turn out to be inaccurate. Factors that could materially affect our business operations and financial performance and condition include, but are not limited to, those risks and uncertainties described herein under “Item 1A - Risk Factors.” You are urged to consider these factors carefully in evaluating the forward-looking statements and are cautioned not to place undue reliance on the forward-looking statements. The forward-looking statements are based on information available to us as of the filing date of this Annual Report on Form 10-K. Unless required by law, we do not intend to publicly update or revise any forward-looking statements to reflect new information or future events or otherwise. You should, however, review the factors and risks we describe in the reports we will file from time to time with the Securities and Exchange Commission, or the SEC, after the date of this Annual Report on Form 10-K.

This Annual Report Form 10-K also contains estimates, projections and other information concerning our industry, our business, and hair restoration market, including data regarding the estimated size of the hair restoration market. Information that is based on estimates, forecasts, projections, market research or similar methodologies is inherently subject to uncertainties and actual events or circumstances may differ materially from events and circumstances reflected in this information. Unless otherwise expressly stated, we obtained this industry, business, market and other data from reports, research surveys, studies and similar data prepared by market research firms and other third parties, industry, medical and general publications, government data and similar sources.

 

 

2


 

PAR T I

Item 1.

Business.

Overview

We are a medical technology company developing and commercializing a robotic device, the ARTAS System, that assists physicians in performing many of the repetitive tasks that are a part of a follicular unit extraction surgery, or FUE, a type of hair restoration procedure. We believe the ARTAS System is the first and only physician-assisted robotic system that can identify and dissect hair follicular units directly from the scalp and create recipient implant sites. The ARTAS System includes the ARTAS Hair Studio application, an interactive three-dimensional patient consultation tool that enables a physician to create a simulated hair transplant model for use in patient consultations. We received clearance from the U.S. Food and Drug Administration, or FDA, in April 2011 to market the ARTAS System in the U.S., and we have sold the ARTAS System into 36 other countries. As of December 31, 2017, we have sold 94 ARTAS Systems in the U.S. and 159 internationally. As of December 31, 2017, the ARTAS System and ARTAS Hair Studio application are protected by over 81 patents in the U.S. and over 110 international patents.

The ARTAS System is comprised of the patient chair, the cart, which includes the robotic arm, integrated vision system, artificial intelligence algorithms and a series of proprietary end effectors, which are the various devices at the end of the robotic arm, such as the automated needle and punch, that interact with the patient’s scalp and hair follicles and perform various clinical functions.

The image below depicts the ARTAS System cart, including the robotic arm and the needle mechanism which houses the automated needle and punch used for follicle dissection and site making, and the ARTAS User Interface.

 

3


 

Market Overview

According to data collected by the International Society of Hair Restoration Surgery, or ISHRS, the global market for hair restoration procedures was approximately $4.1 billion in 2017. We believe the global hair restoration market will continue to grow due to several factors, including:

 

An aging population with disposable income and an increased acceptance of aesthetic procedures. According to data from the American Society for Aesthetic Plastic Surgery, or ASAPS, in 2016, Americans spent more than $15 billion on combined surgical and nonsurgical aesthetic procedures. Male aesthetic procedures have increased 325% since 1997.

 

A market shift to less invasive hair restoration procedures such as follicular unit extraction which, according to ISHRS, have increased from less than 10% of hair restoration procedures performed in 2004 to about 52.6% in 2017.

 

A greater number of physicians seeking patient direct pay procedures, such as hair restoration, due to increased government and private payor reimbursement restrictions.

This growing market has a significant potential patient population with approximately 35 million males in the United States suffering from androgenic alopecia, or AGA, also referred to as male pattern baldness. We have FDA clearance to market the ARTAS System in the U.S. for dissecting hair follicles from the scalp of men diagnosed with AGA who have black or brown straight hair. With this clearance we are able to market the ARTAS System to physicians to treat this growing market.

The Hair Loss Market

According to the census conducted by ISHRS, in 2016, an estimated $4.1 billion was spent globally on surgical hair restoration treatments, representing a 64% increase over the estimated $2.5 billion spent in 2014. In general, the global market for aesthetic procedures marketed towards men is significant and growing. For example, according to ASAPS statistics, the number of aesthetic procedures performed on men in the U.S. increased 325% from 1997 to 2015, to approximately $1.3 billion. The patient market for hair loss is significant with approximately 35 million men suffering from AGA in the United States alone.

Hair Loss Treatment Options and Their Limitations

The treatments for hair loss can broadly be divided between non-surgical options and surgical procedures.

Non-Surgical Options

Non-surgical options for hair loss include prescription therapeutics and non-prescription remedies. In the U.S., the FDA has authorized two prescription therapeutics for hair loss: Rogaine which is applied topically, and Propecia which is ingested in pill form. Both Rogaine and Propecia have several drawbacks, including limited efficacy in some individuals and the need for strict patient compliance in order for the treatment to have meaningful effect. Both products require strict usage without breaks and often require a minimum of six months before meaningful effect is visible. Furthermore, while uncommon and not affecting all men, Propecia can cause multiple side-effects given its systemic administration, including impotence, swelling, dizziness and weakness. In addition to prescription therapeutics, non-surgical remedies for hair loss include wigs, hair pieces and spray-on applications, which also have significant drawbacks primarily due to an unnatural aesthetic look .

Surgical Procedures

Surgical procedures to address hair loss continue to evolve and become more popular. The first of these therapies, hair plugs, was developed in the late 1950s. Due to the size of the transplanted hair follicle groups, or plugs, the transplants resulted in an unnatural look with the patient often having a “doll-hair” like appearance, the clumping or grouping of hair follicles in a visibly uniform pattern. Because of the poor aesthetic results of hair plugs, strip surgery, or FUT, follicular unit transplantation and FUE became increasingly more popular.

FUE is significantly less invasive than strip surgery. In this procedure, the physician or technician removes individual hair follicles from the patient’s scalp without removing a strip of tissue. FUE can be performed with manual hand-held punches, automated hand-held devices or with the ARTAS System. Use of manual or automated hand-held devices requires significant time, and demands that complicated, repetitive and tedious tasks be performed by a trained technician (under the supervision of a physician) or physician. We have developed the

 

4


 

ARTAS System to provide robotic assistance for many of the tedious and repetitive tasks that are part of an FUE procedure.

Strip Surgery

In an FUT procedure, or strip surgery, the physician uses a sharp scalpel to surgically remove a large strip of the patient’s scalp, approximately eight inches in length, and one-half inch in width and depth, from the donor area. The subsequent wound is sutured or stapled closed. Following the surgical removal of the strip of the scalp from the patient’s head, the follicular unit grafts, the natural groupings of hair follicles in the scalp, are removed from the strip of scalp by technicians using microscopes and scalpel blades. Following the removal of the individual hair follicles, technicians implant the individual hair follicles into hundreds to thousands of incisions in the patient’s scalp prepared by the physician.

Strip surgery results in a linear scar which may enlarge over time creating a poor aesthetic outcome in the donor area. As a result, strip surgery patients are generally unable to wear their hair short without revealing the scar. Furthermore, multiple strip surgeries can cause a significant stretching of the scalp which can exacerbate the appearance of this scar. There can also be complications from strip surgery, such as ongoing pain at the scar site, numbness, and potential nerve damage.

Follicular Unit Extraction Using Hand-Held Devices

In part as a solution to the significant scarring and other drawbacks of strip surgery, the follicular unit extraction, or FUE, procedure was developed in the early 2000s. In an FUE procedure, rather than surgically removing a portion of the patient’s scalp, each hair graft is individually dissected from the scalp for transplantation. Because a strip of the patient’s scalp is not removed, a FUE procedure avoids a long linear scar and reduces the post-operative pain and numbness associated with strip surgery. Following the dissection of the individual hair follicles, the physician uses a hand-held device to remove the hair follicles. After harvesting, the individual hair follicles are implanted in the same way as in a strip surgery procedure.

Drawbacks of Strip Surgery and FUE Surgery Using Hand-Held Devices

While strip surgery and FUE surgery using a hand-held device, or manual FUE, can provide significant, long-term results in restoring hair, there are several limitations associated with these procedures.

 

Technician training. Strip surgery and manual FUE procedures require dexterity, demanding hand-eye coordination, and attention to detail by all members of the transplant team. Technicians must handle the delicate grafts carefully and place them into site incisions during implantation without damaging the grafts. For strip surgeries in particular, a technician must undergo significant training to dissect grafts under a microscope and it can take a significant period of time for a technician to become proficient.

 

Labor intensive. Both strip surgery and manual FUE procedures require a large team of technicians to perform the procedure, generally requiring between four and eight technicians. The labor intensiveness and time consuming nature of these techniques limits the number of procedures physicians are able to perform.

 

Long learning curve. Both strip surgery and manual FUE procedures require a major investment of time on the part of physicians and technicians to learn the technique. A physician must commit a substantial amount of time to learn the manual FUE harvesting technique and they often report that the technique is technically and ergonomically challenging. Initially, a physician may only be able to harvest a limited number of grafts per hour, which may ultimately affect the size of the hair transplant procedure the physician is able to perform. In addition, the follicles harvested by a physician using the FUE technique may not be of a high quality. Even physicians and technicians who are highly experienced may have results with high transection rates while performing a manual FUE procedure. For strip surgeries, there is a significant time investment made to train each technician to dissect grafts under a microscope, handle the delicate grafts with instrumentation and to place the grafts into the site incisions during implantation.

 

Surgical planning and recipient site making. In making the recipient sites into which hair follicles are transplanted, the ability of the physician and the technician to visualize and avoid injuring existing hair is limited to what they can achieve with magnified lenses. As a result, this limited visualization may compromise the aesthetic outcome. Additionally, manual site making can present additional issues and

 

5


 

 

complications, including cutting into and damaging existing health y hair, difficulty in matching existing hair angles, successfully creating a random distribution pattern for implantation in order to create a more natural look, and creating sites with a consistent and optimal depth.

 

Lack of high quality visualization tools for the patient. Generally, hair restoration physicians utilize before and after pictures of previous patients and grease pens to delineate the transplant area. These are typically the only available tools to assist the patient in understanding the aesthetic effect of the procedure and do not provide information to visualize the expected outcome illustrated on the actual patient.

 

Inconsistency in performance . Both strip surgery and manual FUE procedures require either physicians or technicians to perform the repetitive and tedious tasks of dissecting grafts over a long period of time. In a strip surgery, the technicians are required to dissect the individual follicles from the harvested strip of the patient’s scalp, whereas in a manual FUE procedure the physician and technicians are required to harvest each individual follicle directly from the patient’s scalp. As a result of this lengthy and tedious process, the physician or technician may begin to fatigue and his or her ability to maintain the concentration necessary to consistently extract high-quality grafts without causing follicle damage may diminish. In addition, graft dissection productivity may decline during the long procedure due to fatigue.

The ARTAS Solution

We believe the ARTAS System addresses many of the shortcomings of other hair restoration procedures. The ARTAS System is capable of robotically assisting a physician through many of the most challenging steps of the hair restoration process, including the dissection of hair follicles, site planning and recipient site making. We believe, with this assistance, the ARTAS System can help shorten the often long learning curve for both physicians and technicians to become proficient in performing hair restoration procedures. In addition, we believe that by assisting the physician and technicians with many of the repetitive and tedious tasks associated with the hair restoration procedure, the ARTAS System can make hair restoration procedures less labor intensive and can reduce inconsistent results. Further, we believe the ARTAS System’s Site Making functionality, which includes an enhanced imaging system and sophisticated algorithms, helps physicians avoid damaging existing follicles and enables them to create a more natural, aesthetically pleasing outcome for the patient.  In addition, we have a robotic implantation functionality that is currently in clinical development which, if cleared for marketing, will enable the ARTAS System to implant harvested hair follicles. We recently submitted a 510(K) application for the implantation functionality in 2018. Our platform includes the ARTAS Hair Studio application which can simulate pre-procedure and post-procedure outcomes and can be utilized during the patient consultation and education process.

The ARTAS procedure provides patients with a minimally invasive, less painful alternative to strip surgery. The ARTAS System has a faster recovery time and avoids the long linear scar at the back of the patient’s head. The ARTAS Hair Studio application allows patients to visualize the expected post-procedure outcome through a three-dimensional model. We believe this patient-physician interaction can provide patients more confidence and make the patient more comfortable in undergoing the procedure. Due to these advantages, we believe the ARTAS System and the ARTAS Hair Studio application are appealing to potential patients considering a hair transplant or those that are using less effective treatments, such as prescription therapeutics or other non-surgical products.

In addition to the advantages afforded to patients, we believe the ARTAS System and the ARTAS Hair Studio application provide compelling benefits for physicians. The ARTAS System’s image-guided robotic capabilities allow physicians to perform procedures with fewer staff than what might be required for a traditional strip surgery or a FUE procedure using hand-held devices. With the robotic assistance provided by the ARTAS System, we believe physicians and technicians will be able to perform the complicated, repetitive and tedious task of dissecting hair grafts with less fatigue and greater productivity than would be possible in a manual FUE procedure. In addition, we believe the ARTAS System, through its ergonomic and easy-to-use platform, in tandem with th e high quality training we provide, can significantly shorten the learning curve for physicians and technicians.

We strategically market the ARTAS System to hair restoration surgeons, dermatologists, plastic surgeons and aesthetic physicians. We believe we are able to reach our target physician customers effectively through focused marketing efforts. These efforts include participation in trade shows, scientific meetings, educational symposiums, webinars, online advertising and other activities. For physicians who purchase the ARTAS System, we provide comprehensive clinical training, practice-based marketing support, as well as patient leads. For example, we believe we help our physician customers increase the number of procedures performed by assigning a practice success

 

6


 

manager, or PSM, to provide assistance in building the physician-customer’s hair restoration pract ice. Support from a PSM includes the deployment of patient marketing materials, assisting with social media and digital marketing strategies, and other marketing and sales support.

Advantages of the ARTAS Procedure

Patient Value . We believe the ARTAS System and the ARTAS Hair Studio application significantly improve the patient experience and outcome in hair transplantation procedures in the following ways:

 

Through the ARTAS System, the dissection of grafts is performed in a manner that leaves only small pinpoint scars that heal faster and are less detectable than the larger post-operative linear scar that would be produced from strip surgery. As a result, an ARTAS procedure can, in many cases, offer a shorter recovery time and can enable patients to resume their daily lifestyle faster than with strip surgery. In addition, the ARTAS procedure allows patients to wear their hair short without a noticeable scar.

 

The ARTAS Hair Studio application enables patients to interact with their physician to make educated decisions on graft numbers and implant placements to achieve their desired aesthetic outcome and to view a simulation of their potential result. We believe this process and interaction give patients more confidence in undergoing a procedure since they have direct input into their treatment and can preview the expected outcome.

 

The ARTAS Site Making functionality translates the physician-patient site design onto the patient’s recipient area. The ARTAS System’s enhanced imaging system and sophisticated algorithms enable the ARTAS System to rapidly create recipient sites at precise depths, replicate pre-existing hair angles, avoid damaging the healthy pre-existing hair and adjust the distribution of the recipient sites to optimally fill in the transplantation area. We believe these elements can contribute to a superior aesthetic outcome .

 

7


 

Physician Value. We believe the ARTAS System provides physicians compelling economic benefits and enables physicians to achieve consistent reproducible results. As a result, we believe the ARTAS procedure also offers an attractive addition to existing dermatology, plastic surgery or aesthetics practices whether they do or do not provide hair restoration procedures.

 

Hair restoration procedures are generally paid for by the patient and do not involve the complexity of securing reimbursement from third-party payors.

 

We believe the ARTAS System’s image-guided robotic capabilities allow physicians to perform hair restoration procedures with fewer staff required than a traditional strip surgery or a manual FUE procedure - procedures can also be performed with less physician and technician fatigue.

 

Because we provide high quality training for physicians and their clinical teams on the use of the ARTAS System and because the robotic system and its intelligent algorithms assist these teams in performing hair restoration procedures, we believe we can significantly shorten the learning curve necessary for hair transplantation procedures using the ARTAS System. This shorter learning curve can reduce barriers to entry for a new hair restoration practice. It can also ease the adoption of a new technology into existing practices.

Clinically-Established Results. Four peer-reviewed clinical publications have demonstrated the quality and consistency of grafts produced by the ARTAS System. One published study indicated average damage rates for the hair follicles, or transection rates, with the ARTAS System were as low as 6.6%, with a second study documenting average transection rates as low as 4.9% in a Korean population of patients. The third study documented that the ARTAS System can be programmed by the physician to select follicular units with larger groupings of hairs while skipping single hair grafts, which allows physicians to choose pa rticular follicular units depending on the hair density they are trying to achieve, providing a clinical benefit as measured by the increase in hairs per harvest of 17% and as measured by the increase in hairs per graft of 11.4%. Results were statistically significant with a p-value less than 0.01.  This study also demonstrates the ability of robotic follicular unit graft selection to increase the amount of hairs a physician can extract for each incision made in the donor area. The fourth study demonstrated that FUE cases larger than 2,500 grafts, or mega-sessions, are possible using the ARTAS System. These peer-reviewed publications demonstrate the reproducibility and consistency of dissection results from the ARTAS System in a diverse group of patients, even as the system is used by different clinicians. To our knowledge, there are no other peer-reviewed clinical publications that demonstrate the reproducibility of results utilizing other products in FUE or strip surgery procedures. We intend to encourage s cientific research in the study of hair restoration to improve our technology, solutions, enhance understanding of our industry and educate physicians on the capabilities of the ARTAS System.

 

8


 

The ARTAS System and Procedure

We believe the ARTAS System with the ARTAS Hair Studio application have improved multiple phases of the hair transplantation procedure, which include patient consultation, harvesting, recipient site making and implantation.  

 

Patient Consultation

During the initial consultation process, potential patients want to understand their hair restoration procedure and visualize its aesthetic outcome. Traditionally, physicians have used pre-procedure and post-procedure pictures of previous patients to illustrate how a new patient’s results might look, requiring a patient to use their imagination to visualize the potential results. Physicians may also use a grease pen to draw the areas directly on the patient’s head to show where grafts could be implanted.

We introduced the ARTAS Hair Studio application in 2014 to make the consultation more informative, interactive and easy for physicians to utilize. The ARTAS Hair Studio application produces a three-dimensional rendering of the recipient area viewable on a tablet device. The physician can draw on the tablet to simulate alternative cosmetic outcomes. A patient can, in real-time, visualize the simulation and look at various outcomes based on the number of grafts to be implanted and placements of the graphs. Since hair transplantation prices charged by physicians often vary based on the number of grafts, this aids both the physician and patient in arriving at a site plan that balances outcome expectations and patient price sensitivities.

 

9


 

The following is an exam ple of a ARTAS Hair Studio pre-procedure and post-procedure simulation:

Harvesting

During the harvesting phase of the hair restoration procedure, the robotic arm and integrated vision system work in tandem to identify the optimal hair follicles to be used in the procedure. The ARTAS vision system uses proprietary algorithms to identify individual hair follicles, growth angle, density, thickness, length and follicle grouping and to determine which grafts to dissect and the optimal order in which they should be dissected. The algorithms recalculate 60 times per second, accommodating patient movement, to provide the physician with accurate up-to-date information during the course of the procedure. We believe these assessments directly correlate to the quality of the outcome and the state of the donor area. This is important as we believe it affects how the donor area will appear following the procedure, and the potential viability for subsequent harvesting for future transplantation procedures. The ARTAS System harvesting user interface provides the physician with enhanced control during the procedure. An example of the harvesting user interface appears as follows:

Following the vision system’s identification of the optimal hair follicles for transplant, the ARTAS System dissects these follicles using a sharp needle to score the epidermis and a punch, coaxial with the needle, to separate the graft

 

10


 

from the surroundin g tissue. In the final step of the harvesting phase, the grafts are removed manually with forceps by the physician or the technician. The grafts are then cleaned, inspected and prepared for implantation.

During the procedure, the physician has the ability to customize the dissection incisions by choosing a needle and punch that will produce 0.8mm, 0.9mm or 1.0mm incisions. The image below illustrates a typical ARTAS System punch and needle:

The needle travels at approximately 2,500 mm to 3,000 mm per second when it contacts the skin. This provides targeted precision and a cleanly scored incision. The punch then spins at 3,000 rpm and loosens the grafts from the surrounding tissue. In a clinical setting, we have observed that the dissection cycle takes between one to two seconds per graft, depending on the length of the graft. In a clinical setting, the ARTAS System has been shown to move from graft to graft at a rate of approximately one to three seconds, thereby enabling the ARTAS System to dissect a graft every two to five seconds, or approximately 720 to over 1,800 grafts per hour. The ARTAS System enables the physicians to adjust dissection parameters to accommodate for different types of skin, and manipulate graft selection algorithms based on patient needs. The ARTAS System can be programmed to dissect as many grafts as appropriate thus maximizing the use of the donor area. It can also be programmed to dissect grafts with more than two hairs each, thereby increasing the hair yield or the number of hairs per graft.

During the harvesting phase of the hair transplantation procedure, the patient may be lightly sedated and the integrated vision system can track patient movement and pause if excessive movement is detected.

Recipient Site Making

Sites, or incisions, are created to receive the harvested grafts. This task is generally performed by the physician. Prior to the ARTAS System, site making was performed manually using a hand-held tool or needle to create hundreds to thousands of tiny incisions in the scalp. This is a critical step as it creates the hair pattern in which the harvested grafts will grow. From communications with physicians we have found that, typically, a physician can manually create approximately 1,500 sites per hour. Precision and consistency, however, can be affected by experience, hand-eye coordination and fatigue.

The ARTAS System Site Making functionality incorporates artificial intelligence and robotics precision to strategically make surgical incision sites for implanting hair follicles, while also identifying and avoiding injuring healthy follicles in proximity of the implantation sites. This allows the patient’s hair to look more natural and prevents damaging existing healthy hair in the transplant area which we believe would result in patients with more hair than if the sites were made manually.

Robotic recipient Site Making, introduced in 2015, is performed by the physician, who develops the ARTAS System treatment plan, or map, identifying where to make the incisions on the patient. The treatment plan is prepared using three-dimension modeling software that takes one picture of the patient’s recipient area and generates a three-dimensional map that is utilized by the ARTAS System. With entry angle accuracy, consistency and precise depth control, the ARTAS System creates the recipient sites using a small solid core needle or a blade at a rate of approximately 2,500 to 3,000 sites per hour, which is significantly faster than the approximately 1,500 sites per hour achieved manually.

 

11


 

Implantation

Following the site making phase of the hair transplantation procedure, the physician and/or technicians manually implant the grafts in the robotically created sites made by the ARTAS System. To help facilitate implantation, we are developing a robotic implantation functionality. We believe this robotic implantation functionality, if approved, will help further shorten the learning curve, improve the consistency and reproducibility of results by protecting permanent hair and reducing inconsistencies associated with manual implantation, and could potentially reduce the amount of time each graft spends outside of the scalp and decrease the overall time required for implantation. During the clinical development of the robotic implantation functionality, we have explored several options for delivering this new functionality to existing ARTAS customers. While we have not determined how this functionality will be incorporated into our current ARTAS System, we are committed to providing our current customers a means to access the implantation functionality if and when it is approved.

This robotic implantation functionality is currently in clinical development and is not approved for commercial use. Our ongoing clinical trial for the implantation functionality is a multi-center, double arm, blinded control study comparing the safety and efficacy of the ARTAS System and manual implantation. The primary endpoint for the clinical trial is determining that the robotic implantation is not inferior to the manual implantation as determined by hair follicle growth at six months and nine months. As of December 31, 2017, a total of 32 patients have been enrolled in the trial. We expect to report the results of our clinical trial in the coming months. In additi on, we recently submitted a 510(K) application for the implantation functionality and if approved, we expect to be able to commence commercial marketing of the implantation functionality in 2018 .

ARTAS Kits for Harvesting and Site Making

The ARTAS System utilizes a set of disposable and reusable kits for our Harvesting and Site Making functionality. Each system comes with a set of reusable items. The disposable kits are included with the purchase of procedures.

Our Growth Strategy

Our goal is to expand the commercialization of the ARTAS System so that it becomes the standard of care for hair transplantation. The key elements of our strategy to achieve this goal are to:

 

Broaden Our Physician Customer Base . In addition to continuing to market the ARTAS System to traditional hair restoration practices, we continue to expand our direct sales efforts to include other physician specialties, such as dermatology and plastic surgery. In both the traditional hair restoration practices and other customer bases, we will be selective in identifying those practitioners who have a track record of successful integration of new technologies and a strong desire to build a hair restoration practice around the ARTAS System.

 

Expand Our International Business . According to ISHRS, the size of the international hair restoration market is larger than the U.S. market and in certain markets FUE is already believed to be the preferred method for hair restoration surgery. We are focused on increasing our market penetration overseas and building global brand recognition. In 2017, approximately 58% of our revenue was generated outside of the US. We intend to continue to bolster our international business by adding distributors and sales support staff, which we believe will help to increase sales and strengthen physician relationships in our international markets.

 

Continue to Innovate. Since the introduction of the ARTAS System in 2011, we have regularly introduced new innovations and updates to the ARTAS System, and we i ntend to continue this innovation going forward. For example, we are developing a robotic implantation functionality to the ARTAS System which is in clinical development. We also intend to continue to refine our harvesting technology and user interface, while making ongoing investments in research and development driven by customer feedback and market demands. Furthermore, we may pursue expanding the cleared indications of use beyond men with a specific hair type so that the ARTAS System can be more broadly utilized.

 

Drive Increased Utilization . In addition to revenue from system sales and servicing, we also generate revenue from procedure based fees. We will continue to work collaboratively with our physician customers to increase utilization by introducing new functionalities, technology and innovations. In addition, we believe we can increase procedure revenue by helping physicians build their practice through our marketing and training support. To achieve all of these goals, we intend to utilize our teams

 

12


 

 

of clinical training managers, or CTMs, PSMs and field service engineers to work with and to support our physician customers in developing profitable ARTAS practices.

Research and Development

Since we started selling the ARTAS System in 2011, we have introduced a number of new functionalities and enhancements designed to make the use of the ARTAS System more intuitive for clinicians and more comfortable for patients with the ultimate goal of improving clinical outcomes.

Our research and development efforts are focused on improvements which continue to refine our Harvesting and Site Making functions. We are also developing a robotic implantation functionality for the ARTAS System which is in clinical development. We also intend to continue to improve our user interface, while making ongoing investments in research and development driven by customer feedback and market demands. For the years ended December 31, 2017, 2016 and 2015, we incurred research and development expenses of $7.1 million, $7.5 million and $7.4 million, respectively.

Intellectual Property

Patents and Proprietary Technology

We rely on a combination of patent, copyright, trademark and trade secret laws, and confidentiality and invention assignment agreements to protect our intellectual property rights. As of December 31, 2017, we had 81 issued U.S. patents, primarily covering the ARTAS System and methods of use, the earliest of which expire in 2021, 20 pending U.S. patent applications, 110 issued foreign patents, some of which preserve an opportunity to pursue patent rights in multiple countries, and 38 pending foreign patent applications.

Our patents cover the ARTAS Hair Studio and ARTAS System’s robotic mechanism, vision system, methods and algorithms of harvesting and making recipient sites, industrial designs and hardware. Our pending patent applications may not result in issued patents, and we cannot provide assurance that any current or subsequently issued patents will protect our intellectual property rights. Third parties may challenge certain patents issued to us as invalid, may independently develop similar or competing technologies or may design around any of our patents. We cannot be certain that any of the steps we have taken will prevent the misappropriation of our intellectual property, particularly in foreign countries where the laws may not protect our proprietary rights in these countries as fully as in the U.S.

There is no active patent litigation involving us and we have not received any notices of patent infringement.

License Agreement with HSC Development LLC and James A. Harris, MD

In July 2006, we entered into a license agreement, or the HSC license agreement, with HSC Development LLC, or HSC, and James A. Harris, M.D., as amended, pursuant to which we received an exclusive, worldwide license to develop, manufacture and commercialize products covered by any of the licensed patent rights or that incorporate the licensed technology in the field of performance of hair removal and implantation, including transplantation, procedures using a computer controlled system in which a needle or other device carried on a mechanized arm is oriented to a follicular unit for extraction of same, or to an implant site for implantation of a follicular unit, or some combination thereof. Under the HSC license agreement, we are developing the ARTAS System to be utilized as a robotic system to assist a physician in performing hair restoration procedures. In consideration for the license, we issued to HSC 25,000 shares of our common stock and paid HSC a one-time payment of $25,000. The license grant is perpetual, and the license agreement does not provide a right for HSC or Dr. Harris to terminate the HSC license agreement. The licensed patents cover, in general, a method and device for the extraction of follicular units from a donor area on a patient. The method includes scoring the outer skin layers with a sharp punch, and then inserting a blunt punch into the incision to separate the hair follicle from the surrounding tissue and fatty layer. The method and device significantly decrease the amount of follicular transection and increase the rate at which follicular units can be extracted. There are other embodiments not herein disclosed. The licensed patents will expire from 2025 through 2030.

Sales and Marketing

We generate revenue from the sale and service of ARTAS Systems and procedure based fees. Generally, our physician customers either purchase their procedures online or through distributors. In the U.S., customers pay in advance generally on a per hair follicle basis for the hair follicles to be harvested, and on a per procedure basis for

 

13


 

Site Making. Outside of the US, physician customers pay in advance, generally on a per procedure basis for both hair follicle Harvesting and Site Making . Customers generally either purchase their ARTAS System directly or finance their purchase through third parties. We do not provide financing to our customers.

We sell the ARTAS System, provide service and generate procedure based fees. In the U.S. we generate revenue through our direct sales force. Outside of the U.S. we utilize our direct sales force as well as third-party distributors. As of December 31, 2017, we have sold the ARTAS System in 37 countries.

U.S. Sales

We sell the ARTAS System, provide service and generate procedure based revenue by helping our physician customers build their hair restoration practice, through a direct sales force in the U.S. which, as of December 31, 2017, included four regional sales managers, or RSMs, six CTMs and five PSMs.

Regional Sales Managers

Our RSMs are responsible for coordinating and executing the direct sales of the ARTAS Systems. We target potential customers through marketing events and programs, and we leverage longstanding RSM relationships with dermatologists, plastic surgeons and cosmetic aesthetic surgeons.

Clinical Training Managers

Our CTMs provide high quality, comprehensive training and education to physicians on the use of the ARTAS System and on how to build their hair restoration practices. As of December 31, 2017, our CTM team is comprised of six highly-skilled professionals with an average of over 10 years of experience in training physician practices in hair restoration or other aesthetics procedures and surgery. We provide this initial training to assist physicians and their staffs in performing the ARTAS procedure in accordance with the product’s cleared instructions for use. Prior to the installation of the ARTAS System, the CTMs meet with the physician and their technicians to assess the level of training that will be required.

Our CTM training programs involve product and procedure training. During this initial training, we typically have one to three CTMs on site. We have found that a key to adoption and utilization of the ARTAS System is clinical confidence in the ARTAS System technology and procedure. We often conduct onsite physician training when we introduce innovations, such as the ARTAS Hair Studio application and our Site Making functionality.

Practice Success Managers

Our PSMs are responsible for helping our physician customers build awareness and market the ARTAS procedure and increase ARTAS brand-awareness. Our PSMs average over five years of experience in developing hair restoration practices and aesthetics practices. They form strong relationships with our customers and consult on how to integrate the ARTAS System into their practices, while raising awareness of the procedure among potential patients. This process often begins before the ARTAS System is installed at the customer site. Our PSMs work closely with the team that will manage the ARTAS business at the practice level to establish goals and develop detailed strategies to achieve these goals. This includes extensive training and coaching with respect to the patient consultation process. We provide easily implemented marketing tools allowing practices to create individually tailored website content, direct mail advertisements, print ads for magazines and newspapers and brochures. In addition, PSMs consult on methods to raise awareness of the ARTAS procedure through practice events, public relations, television, and radio advertising and other channels.

International Sales

We are developing selected markets outside the U.S. through a combination of direct selling and a network of distribution partners. As of December, 31 2017, we have three regional directors overseeing Asia, Europe, the Middle East, Africa and Latin America. These regional directors are responsible for coordinating direct sales, as well as the management of our distribution partners within these regions. There are four sales personnel directly selling in nine countries, as well as an international sales team of 15 employees supporting 20 independent distributors who market the ARTAS System in 27 countries. We require our distributors to provide technical service, clinical education, training and practice development.

In international markets, we utilize a variety of tools to market to physicians. We have two employees supporting marketing-related activities dedicated to international regions. We provide market support for our existing

 

14


 

international ARTAS System owners that is substantially similar to the support we provide to owners in the U.S., either directly or indirectly through our distributors. We also market at major medical and scientific meetings, as well as tradeshows. Furthermore, we sponsor the ARTAS Symposia where physicians can view live ARTAS procedures and attend physician lectures and panel discussions led by key opinion leaders to lea rn how to develop successful ARTAS practices.

Competition

We compete directly in the surgical hair restoration market. We consider our direct competition to be strip surgeries and FUE procedures using hand-held devices. Among FUE procedures, we face specific competition from the manufacturers of hand-held devices, such as NeoGraft, which is a 510(k) exempt Class I device for use in hair transplantation procedures. We believe there are less than a dozen manufacturers of hand-held devices for FUE procedures. NeoGraft, similar to certain other hand-held FUE devices, consists of a hand-held sharp punch that is motorized to dissect and to use suction to remove grafts from the scalp.

We believe that the primary competitive factors in this market are:

 

company and product brand recognition;

 

effective marketing and education;

 

sales force experience and access;

 

product support and service;

 

technological innovation, product enhancements and speed of innovation;

 

pricing and revenue strategies;

 

product reliability, safety and durability;

 

ease of use;

 

consistency, predictability and durability of aesthetic results;

 

procedure costs to patients; and

 

dedicated practice development teams; and dedicated clinical training teams.

Many of our surgical device and equipment competitors have greater capital resources, sales and marketing operations and service infrastructures than we do, as well as longer commercial histories and more extensive relationships with physicians.

Strip surgery and some manual FUE procedures have a greater penetration into the hair restoration market. We face resistance from some established hair restoration practices in converting to ARTAS procedures due to workflow and staffing changes required, even though we believe that staffing requirements are reduced with the adoption of ARTAS procedures.

We face competition to recruit and retain qualified sales, training and other personnel.

We face competition for attention from our distributors as they may also sell other non-competing products.

Our indirect competition includes non-surgical treatments for hair loss, such as prescription therapeutics, including Propecia, and non-prescription remedies, such as wigs, hair pieces and spray-on applications. We also face competition from other aesthetic devices that physicians may consider adding to their practice in lieu of building a hair restoration practice.

Manufacturing

The ARTAS System, reusable and disposable kits and upgrade kits are assembled exclusively for us by Evolve Manufacturing Technologies, Inc., or Evolve, a contract manufacturer based in Fremont, California. We have two master agreements and a component pricing agreement with Evolve for the supply of the ARTAS System, and consumable products, including reusable and disposable procedure kits and upgrade kits used with the ARTAS System, pursuant to both of which we make purchases on a purchase order basis. The terms of these master agreements are substantially similar. The master agreement for the sale of ARTAS Systems was effective beginning

 

15


 

on A pril 1, 2016 and the master agreement for the sale of kits used with the ARTAS System was effective beginning on March 1, 2016. Both agreements are effective for an initial term of two years and will continue to automatically renew for additional twelve mo nth periods, subject to either party’s right to terminate the agreement upon 180 days advance notice during the initial term if our quarterly forecasted demand falls below 75% of our historical forecasted demand for the same period in the previous year or upon 120 days’ advance notice after the initial term. Our agreement with Evolve for the pricing of certain components at certain quantities was effective on August 1, 2016 and expires on August 1, 2018. Otherwise, Evolve is not required, and may not be abl e or willing, to meet our future requirements at current prices, or at all.

The components that make up the ARTAS System are manufactured by many different providers, including major components manufactured by sole source suppliers, such as the robotic arm, which is manufactured by Stäubli Corporation, the cameras, which are manufactured by FLIR Integrated Imaging Solutions Inc. and the product casing, which is manufactured by Preproduction Plastics Inc. Each of the ARTAS Systems undergoes testing at multiple interim stages during the manufacturing process, and is tested during one last time prior to delivery.

Given that we utilize one partner to assemble the ARTAS System and the reusable and disposable kits, and source manufacturing of its component parts, we do not believe we could replace Evolve without incurring any material delay or other significant effects on production. We may also have difficulty maintaining sufficient production requirements in the event that Evolve’s relationship with any of Evolve’s sole source suppliers or manufacturers terminates in the future. Where practicable, we are seeking, or intending to seek second-source manufacturers for certain of our components. We believe that existing third-party facilities will be adequate to meet our current and anticipated manufacturing needs. In the last three years, we have not experienced any material delays in obtaining any of our products, nor has the ready supply of finished product to our customers been adversely affected.

In the U.S., we and Evolve are required to manufacture our products in compliance with the FDA’s Quality System Regulation, or QSR. The QSR covers the methods and documentation used in, and the facilities used for the design, testing, control, manufacturing, labeling, quality assurance, packaging, storage and shipping of our products. In international markets, we also maintain various quality assurance and quality management certifications. We have obtained the following certifications that enable us to market our products in the European Union member states: Quality Management System ISO 13485 certificate, EC certificate #3806999CE01. We have additionally obtained and maintain our product registration in a number of other foreign markets such as Canada and China.

Services and Support

We provide a warranty that typically has a term of one year and covers all the components of the system. Once the warranty expires, customers have the option of purchasing a service contract, which is typically for a term of one or two years. The service contracts that we offer cover preventative and corrective maintenance visits for all components of the system as well as system updates.

For both warranties and service contracts, the customer’s typical first point of contact for system failures or other technical issues is our customer support line. If the problem cannot be resolved over the phone or by directly connecting to the customer’s system electronically, a field service engineer will be dispatched to the customer site. We generally have a 24-hour response time or less for service calls. Our goal is to minimize the disruption caused by a service event.

We strive to provide highly responsive service and support for the ARTAS System. Our disposable and reusable kits are shipped from Legacy Transportation Services Inc. All kits are identified with lot numbers and date codes that indicate the expiration date of the product and are fully warranted until the date of expiration. We maintain a staff of customer service personnel in our San Jose, California facility that is available by phone to answer questions regarding the use of the ARTAS System. In addition, in the U.S. and certain international territories, our direct service organization provides on-site support and training to our customers in the use of the ARTAS System.

In the U.S. and certain international territories, the ARTAS System is shipped to a customer’s site for installation by one of our Field Service Engineers and training by one of our CTM’s. Our Field Service Engineers, CTMs and PSMs provide post-installation support and service.

In markets where we utilize distributors, the ARTAS System is serviced and supported through our independent distributors. We typically provide distributors with a warranty for each ARTAS System during the warranty period. Once the warranty period ends, the distributors have the option to continue providing support to the end-user customer by purchasing parts through our Parts and Services program or on an as-needed basis.

 

16


 

Government Regulation

Our products and our operations are subject to extensive regulation by the FDA and other federal and state authorities in the U.S., as well as comparable authorities in foreign jurisdictions. Our products are subject to regulation as medical devices in the U.S. under the Federal Food, Drug, and Cosmetic Act, or FDCA, as implemented and enforced by the FDA. The FDA regulates the development, design, non-clinical and clinical research, manufacturing, safety, efficacy, labeling, packaging, storage, installation, servicing, recordkeeping, premarket clearance or approval, import, export, adverse event reporting, advertising, promotion, marketing and distribution, and import and export of medical devices to ensure that medical devices distributed domestically are safe and effective for their intended uses and otherwise meet the requirements of the FDCA.

FDA Premarket Clearance and Approval Requirements

Unless an exemption applies, each medical device commercially distributed in the U.S. requires either FDA clearance of a 510(k) premarket notification, or approval of a premarket approval application, or PMA. Under the FDCA, medical devices are classified into one of three classes—Class I, Class II or Class III—depending on the degree of risk associated with each medical device and the extent of manufacturer and regulatory control needed to ensure its safety and effectiveness. Class I includes devices with the lowest risk to the patient, and Class I devices are those for which safety and effectiveness can be assured by adherence to the FDA’s General Controls for medical devices, which include compliance with the applicable portions of the Quality System Regulation, or QSR, facility registration and product listing, reporting of adverse medical events, and truthful and non-misleading labeling, advertising, and promotional materials. Class II devices are subject to the FDA’s General Controls, and special controls as deemed necessary by the FDA to ensure the safety and effectiveness of the device. These special controls can include performance standards, post market surveillance, patient registries and FDA guidance documents. While most Class I devices are exempt from the 510(k) premarket notification requirement, manufacturers of most Class II devices are required to submit to the FDA a premarket notification under Section 510(k) of the FDCA requesting permission to commercially distribute the device. The FDA’s permission to commercially distribute a device subject to a 510(k) premarket notification is generally known as 510(k) clearance. Devices deemed by the FDA to pose the greatest risks, such as life-sustaining, life-supporting or some implantable devices, or devices that have a new intended use, or use advanced technology that is not substantially equivalent to that of a legally marketed device, are placed in Class III, requiring approval of a PMA. Some pre-amendment devices are unclassified, but are subject to the FDA’s premarket notification and clearance process in order to be commercially distributed. To date, our products have been subject to the 510(k) clearance process.

510(k) Marketing Clearance Pathway

To obtain 510(k) clearance, we must submit to the FDA a premarket notification submission demonstrating that the proposed device is ‘‘substantially equivalent’’ to a predicate device already on the market. A predicate device is a legally marketed device that is not subject to premarket approval, i.e. , a device that was legally marketed prior to May 28, 1976 (pre-amendments device) and for which a PMA is not required, a device that has been reclassified from Class III to Class II or I, or a device that was found substantially equivalent through the 510(k) process. The FDA’s 510(k) clearance process usually takes from nine to twelve months, but may take significantly longer. The FDA may require additional information, including clinical data, to make a determination regarding substantial equivalence.

If the FDA agrees that the device is substantially equivalent to a predicate device on the market, it will grant 510(k) clearance to commercially market the device. If the FDA determines that the device is “not substantially equivalent” to a previously cleared device, the device is automatically designated as a Class III device. The device sponsor must then fulfill more rigorous PMA requirements, or can request a risk-based classification determination for the device in accordance with the “de novo” process, which is a route to market for novel medical devices that are low to moderate risk and are not substantially equivalent to a predicate device.

After a device receives 510(k) marketing clearance, any modification that could significantly affect its safety or effectiveness, or that would constitute a major change or modification in its intended use, will require a new 510(k) marketing clearance or, depending on the modification, a de novo classification or PMA approval. The FDA requires each manufacturer to determine whether the proposed change requires submission of a 510(k) or a PMA in the first instance, but the FDA can review any such decision and disagree with a manufacturer’s determination. Many minor modifications today are accomplished by a letter-to-file in which the manufacture documents the change in an internal letter-to-file. The letter-to-file is in lieu of submitting a new 510(k) to obtain clearance for

 

17


 

every change. The FDA may review these letters-to-file during an inspection. If the FDA disagrees with a manufacturer’s determination that no 510(k) was required for the change, the FDA can require the manufacturer to cease marketing and/or request the recall of the modified device until 510(k) marketing clearance or PMA approval is obtained. Also, in these circumstances, we may be subject to significant regulatory fines or penalties. The FDA has issued guidance, originally in 1997, to assist device manufacturers in making the determination as to whether a modification to a device requires a new 510(k).

PMA Approval Pathway

Class III devices require PMA approval before they can be marketed although some pre-amendment Class III devices for which the FDA has not yet required a PMA are cleared through the 510(k) process. The PMA process is more demanding than the 510(k) premarket notification process. In a PMA, the manufacturer must demonstrate that the device is safe and effective, and the PMA must be supported by extensive data, including data from preclinical studies and human clinical trials. The PMA must also contain a full description of the device and its components, a full description of the methods, facilities and controls used for manufacturing, and proposed labeling. Following receipt of a PMA, the FDA determines whether the application is sufficiently complete to permit a substantive review. If the FDA accepts the application for review, it has 180 days under the FDCA to complete its review of a PMA, although in practice, the FDA’s review often takes significantly longer, and can take up to several years. An advisory panel of experts from outside the FDA may be convened to review and evaluate the application and provide recommendations to the FDA as to the approvability of the device. The FDA may or may not accept the panel’s recommendation. In addition, the FDA will generally conduct a pre-approval inspection of the applicant or its third-party manufacturers’ or suppliers’ manufacturing facility or facilities to ensure compliance with the Quality System Regulation, or QSR.

The FDA will approve the new device for commercial distribution if it determines that the data and information in the PMA constitute valid scientific evidence and that there is reasonable assurance that the device is safe and effective for its intended use(s). The FDA may approve a PMA with post-approval conditions intended to ensure the safety and effectiveness of the device, including, among other things, restrictions on labeling, promotion, sale and distribution, and collection of long-term follow-up data from patients in the clinical study that supported PMA approval or requirements to conduct additional clinical studies post-approval. The FDA may condition PMA approval on some form of post-market surveillance when deemed necessary to protect the public health or to provide additional safety and efficacy data for the device in a larger population or for a longer period of use. In such cases, the manufacturer might be required to follow certain patient groups for a number of years and to make periodic reports to the FDA on the clinical status of those patients. Failure to comply with the conditions of approval can result in material adverse enforcement action, including withdrawal of the approval.

Certain changes to an approved device, such as changes in manufacturing facilities, methods, or quality control procedures, or changes in the design performance specifications, which affect the safety or effectiveness of the device, require submission of a PMA supplement. PMA supplements often require submission of the same type of information as a PMA, except that the supplement is limited to information needed to support any changes from the device covered by the original PMA and may not require as extensive clinical data or the convening of an advisory panel. Certain other changes to an approved device require the submission of a new PMA, such as when the design change causes a different intended use, mode of operation, and technical basis of operation, or when the design change is so significant that a new generation of the device will be developed, and the data that were submitted with the original PMA are not applicable for the change in demonstrating a reasonable assurance of safety and effectiveness.

Clinical Trials

Clinical trials are almost always required to support a PMA and are sometimes required to support a 510(k) submission. All clinical investigations of investigational devices to determine safety and effectiveness must be conducted in accordance with the FDA’s investigational device exemption, or IDE, regulations which govern investigational device labeling, prohibit promotion of the investigational device, and specify an array of recordkeeping, reporting and monitoring responsibilities of study sponsors and study investigators. If the device presents a “significant risk” to human health, as defined by the FDA, the FDA requires the device sponsor to submit an IDE application to the FDA, which must become effective prior to commencing human clinical trials. A significant risk device is one that presents a potential for serious risk to the health, safety or welfare of a patient and either is implanted, used in supporting or sustaining human life, substantially important in diagnosing, curing,

 

18


 

mitigating or treat ing disease or otherwise preventing impairment of human health, or otherwise presents a potential for serious risk to a subject. An IDE application must be supported by appropriate data, such as animal and laboratory test results, showing that it is safe to test the device in humans and that the testing protocol is scientifically sound. The IDE will automatically become effective 30 days after receipt by the FDA unless the FDA notifies the company that the investigation may not begin. If the FDA determines that there are deficiencies or other concerns with an IDE for which it requires modification, the FDA may permit a clinical trial to proceed under a conditional approval.

In addition, the study must be approved by, and conducted under the oversight of, an Institutional Review Board, or IRB, for each clinical site. The IRB is responsible for the initial and continuing review of the IDE, and may pose additional requirements for the conduct of the study. If an IDE application is approved by the FDA and one or more IRBs, human clinical trials may begin at a specific number of investigational sites with a specific number of patients, as approved by the FDA. If the device presents a non-significant risk to the patient, a sponsor may begin the clinical trial after obtaining approval for the trial by one or more IRBs without separate approval from the FDA, but must still follow abbreviated IDE requirements, such as monitoring the investigation, ensuring that the investigators obtain informed consent, and labeling and record-keeping requirements. Acceptance of an IDE application for review does not guarantee that the FDA will allow the IDE to become effective and, if it does become effective, the FDA may or may not determine that the data derived from the trials support the safety and effectiveness of the device or warrant the continuation of clinical trials. An IDE supplement must be submitted to, and approved by, the FDA before a sponsor or investigator may make a change to the investigational plan that may affect its scientific soundness, study plan or the rights, safety or welfare of human subjects.

During a study, the sponsor is required to comply with the applicable FDA requirements, including, for example, trial monitoring, selecting clinical investigators and providing them with the investigational plan, ensuring IRB review, adverse event reporting, record keeping and prohibitions on the promotion of investigational devices or on making safety or effectiveness claims for them. The clinical investigators in the clinical study are also subject to FDA regulations and must obtain patient informed consent, rigorously follow the investigational plan and study protocol, control the disposition of the investigational device, and comply with all reporting and recordkeeping requirements. Additionally, after a trial begins, we, the FDA or the IRB could suspend or terminate a clinical trial at any time for various reasons, including a belief that the risks to study subjects outweigh the anticipated benefits.

Post-market Regulation

After a device is cleared or approved for marketing, numerous and pervasive regulatory requirements continue to apply. These include:

 

establishment registration and device listing with the FDA;

 

QSR requirements, which require manufacturers, including third-party manufacturers, to follow stringent design, testing, control, documentation and other quality assurance procedures during all aspects of the design and manufacturing process;

 

labeling and marketing regulations, which require that promotion is truthful, not misleading, fairly balanced and provide adequate directions for use and that all claims are substantiated, and also prohibit the promotion of products for unapproved or “off-label” uses and impose other restrictions on labeling;

 

clearance or approval of product modifications to 510(k)-cleared devices that could significantly affect safety or effectiveness or that would constitute a major change in intended use of one of our cleared devices;

 

medical device reporting regulations, which require that a manufacturer report to the FDA if a device it markets may have caused or contributed to a death or serious injury, or has malfunctioned and the device or a similar device that it markets would be likely to cause or contribute to a death or serious injury, if the malfunction were to recur;

 

correction, removal and recall reporting regulations, which require that manufacturers report to the FDA field corrections and product recalls or removals if undertaken to reduce a risk to health posed by the device or to remedy a violation of the FDCA that may present a risk to health;

 

19


 

 

complying with the federal law and regulations requiring Unique Device Identifiers (UDI) on devices and also requiring the submission of certain information about each de vice to the FDA’s Global Unique Device Identification Database, or GUDID;

 

the FDA’s recall authority, whereby the agency can order device manufacturers to recall from the market a product that is in violation of governing laws and regulations; and

 

post-market surveillance activities and regulations, which apply when deemed by the FDA to be necessary to protect the public health or to provide additional safety and effectiveness data for the device.

We may be subject to similar foreign laws that may include applicable post-marketing requirements such as safety surveillance. Our manufacturing processes are required to comply with the applicable portions of the QSR, which cover the methods and the facilities and controls for the design, manufacture, testing, production, processes, controls, quality assurance, labeling, packaging, distribution, installation and servicing of finished devices intended for human use. The QSR also requires, among other things, maintenance of a device master file, device history file, and complaint files. As a manufacturer, we are subject to periodic scheduled or unscheduled inspections by the FDA. A failure to maintain compliance with the QSR requirements could result in the shut-down of, or restrictions on, manufacturing operations and the recall or seizure of products. The FDA has broad regulatory compliance and enforcement powers. If the FDA determines that we failed to comply with applicable regulatory requirements, it can take a variety of compliance or enforcement actions, which may result in any of the following sanctions:

 

warning letters, untitled letters, fines, injunctions, consent decrees and civil penalties;

 

recalls, withdrawals, or administrative detention or seizure of our products;

 

operating restrictions or partial suspension or total shutdown of production;

 

refusing or delaying requests for 510(k) marketing clearance or PMA approvals of new products or modified products;

 

withdrawing 510(k) clearances or PMA approvals that have already been granted;

 

refusal to grant export or import approvals for our products; or

 

criminal prosecution.

Other Health Care Laws

In addition to FDA restrictions on the marketing and promotion of medical devices, other federal and state healthcare laws and regulations could restrict our business practices. Although none of the procedures using our products are covered by any federal or state government healthcare program or any other third-party payor, applicable agencies and regulators may nonetheless interpret that we are subject to numerous federal healthcare anti-fraud laws, which include the federal Anti-Kickback Statute, False Claims Act and physician payment transparency laws that are intended to reduce waste, fraud and abuse in the healthcare industry, and analogous state laws that may apply to healthcare items and services paid for by any payors, including private insurers. In addition, we are subject to certain state reporting requirements in states with physician payment transparency laws that apply regardless of payor. Violations of any of these health regulatory laws may result in potentially significant penalties, including criminal and civil and administrative penalties, damages, fines, disgorgement, imprisonment, exclusion from participation in government healthcare programs, contractual damages, reputational harm, administrative burdens, diminished profits and future earnings, and the curtailment or restructuring of our operations. To the extent that any of our products are sold in a foreign country, we may be subject to similar foreign laws, which may include, for instance, applicable post-marketing requirements, including safety surveillance, anti-fraud and abuse laws and implementation of corporate compliance programs and reporting of payments or transfers of value to healthcare professionals.

Healthcare Reform

The U.S. and some foreign jurisdictions are considering or have enacted a number of legislative and regulatory proposals to change the healthcare system in ways that could affect our ability to sell our products profitably. For example, the implementation of the Patient Protection and Affordable Care Act, as amended by the Healthcare and Education Reconciliation Act, or the Affordable Care Act, has changed healthcare financing and delivery by both governmental and private insurers substantially and has affected medical device manufacturers significantly. The

 

20


 

Affordable Care Act imposed, among other things, a new federal excise tax on the sale of certain medical devices, which is suspended but, absen t further legislative action, will be reinstated starting January 1, 2020. In addition, the Affordable Care Act provided incentives to programs that increase the federal government’s comparative effectiveness research, and implemented payment system reform s including a national pilot program on payment bundling to encourage hospitals, physicians and other providers to improve the coordination, quality and efficiency of certain healthcare services through bundled payment models. Since its enactment, there have been judicial and Congressional challenges to certain aspects of the Affordable Care Act, and we expect there will be additional challenges and amendments to the Affordable Care Act in the future. The current Presidential Administration and U.S. Congr ess will likely continue to seek to modify, repeal, or otherwise invalidate all, or certain provisions of, the Affordable Care Act. It is uncertain the extent to which any such changes may impact our business or financial condition. We expect additional state and federal healthcare reform measures to be adopted in the future, any of which could result in reduced demand for our products or additional pricing pressure.

Employees

As of December 31, 2017, we had 87 employees, with 35 employees in sales and marketing, 15 employees in customer support, 21 employees in research and development, including clinical, regulatory and certain quality control functions, four employees in manufacturing operations and 12 employees in general management and administration. None of our employees are represented by a labor union or covered by a collective bargaining agreement. We consider our relationship with our employees to be good.

Financial Information

We manage our operations and allocate resources as a single reporting segment. Financial information regarding our operations, assets and liabilities, including our net loss for the years ended December 31, 2017, 2016 and 2015, and our total assets as of December 31, 2017 and 2016, is included in our Consolidated Financial Statements in Item 8 of this Annual Report on Form 10-K.

Corporate Information

We were founded on November 22, 2002 as a Delaware corporation under the name Restoration Robotics, Inc. Our principal executive offices are located at 128 Baytech Drive, San Jo se, CA 95134, and our telephone number is (408) 883-6888. You may find on our website at www.restorationrobotics.com electronic copies of our annual report on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K, and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934. Such filings are placed on our website as soon as reasonably possible after they are filed with the SEC. Our most recent charter for our audit, compensation, and nominating and corporate governance committees and our Code of Business Conduct and Ethics are available on our website as well. Any waiver of our Code of Business Conduct and Ethics may be made only by our board of directors. Any waiver of our Code of Business Conduct and Ethics for any of our directors or executive officers must be disclosed on a Current Report on Form 8-K within four business days, or such shorter period as may be required under applicable regulation.  Information contained on, or that can be accessed through, our website is not incorporated by reference into this Annual Report on Form 10-K, and you should not consider information on our website to be part of this Annual Report on Form 10-K. We have included our website address as an inactive textual reference only.

Available Information

We file Annual Reports on Form 10-K, Quarterly Reports on Form 10-Q, Current Reports on Form 8-K and other information with the Securities and Exchange Commission (SEC). Our filings with the SEC are available free of charge on the SEC’s website at www.sec.gov and on our website under the “Investors” tab as soon as reasonably practicable after we electronically file such material with, or furnish it to, the SEC. You may also read and copy, at SEC prescribed rates, any document we file with the SEC at the SEC’s Public Reference Room located at 100 F Street, N.E., Washington D.C. 20549. You can call the SEC at 1-800-SEC-0330 to obtain information on the operation of the Public Reference Room.

Item 1A. Risk Factors.

Our operations and financial results are subject to various risk and uncertainties, including those described below, any of which could adversely effect on our business, results of operations, financial condition and prospects. In such an event, the market price of our common stock could decline, and you may lose all or part of your investment.

 

21


 

Additional risks and uncertainties not presently known to us or that we currently deem immaterial may also impair our business operations. You should carefully consider the risk described below and the other information in this Annual Report on Form 10-K, including our consolidated financial statements and the related notes thereto, and “Management’s Discussion and Analysis of Financial Condition and Results of Operations.”

Related to Our Business

We have limited commercial history and we have incurred significant losses since our inception. We anticipate that we will continue to incur losses for the foreseeable future, which, together with our limited operating history, makes it difficult to assess our future viabilit y .

We have a limited commercial history and have focused primarily on research and development, product design and engineering, establishing supply and manufacturing relationships, seeking regulatory clearances and approvals to market the ARTAS Robotic Hair Restoration System, or the ARTAS System, and selling and marketing. We have incurred losses in each year since our inception in 2002. Our net losses were approximately $17.8 million, $21.8 million, and $23.0 million for the years ended December 31, 2017, 2016, and 2015, respectively. As of December 31, 2017, we had an accumulated deficit of $164.5 million. We will continue to incur significant expenses for the foreseeable future as we expand our sales and marketing, research and development, and clinical and regulatory activities. We may never generate sufficient revenue to achieve or sustain profitability. Even if we do achieve profitability, we may not be able to sustain or increase profitability. Furthermore, because of our limited operating history and because the market for aesthetic products is rapidly evolving, we have limited insight into the trends or competitive products that may emerge and affect our business. Before investing, you should consider an investment in our common stock in light of the risks, uncertainties, and difficulties frequently encountered by early-stage medical technology companies in rapidly evolving markets such as ours. We may not be able to successfully address any or all of these risks, and the failure to adequately do so could cause our business, results of operations, and financial condition to suffer.

We may not be able to correctly estimate or control our future operating expenses, which could lead to cash shortfalls.

Our operating expenses may fluctuate significantly in the future as a result of a variety of factors, many of which are outside of our control. These factors include:

 

the time, resources and expense required to develop and conduct clinical trials and seek additional regulatory clearances and approvals for the robotic implantation functionality which is in clinical developmen t , and for any other products or indications we may develop;

 

the costs of preparing, filing, prosecuting, defending, and enforcing patent claims and other patent related costs, including litigation costs and the results of such litigation;

 

the costs of manufacturing and maintaining sufficient inventories of our products to meet anticipated demand;

 

the costs of enhancing the existing functionality and development of new functionalities for the ARTAS System;

 

any product liability or other lawsuits related to our products and the costs associated with defending them or the results of such lawsuits;

 

the cost of growing our ongoing commercialization and sales and marketing activities;

 

the costs associated with conducting business and maintaining subsidiaries in foreign jurisdictions;

 

the costs to attract and retain personnel with the skills required for effective operations; and

 

the costs associated with being a public company.

Our budgeted expense levels are based in part on our expectations concerning future revenue from ARTAS System sales, servicing and procedure based fees. We may be unable to reduce our expenditures in a timely manner to compensate for any unexpected shortfalls in revenue. Accordingly, a significant shortfall in market acceptance or demand for the ARTAS System and procedures could have an immediate and material adverse impact on our business and financial condition.

 

22


 

It is difficult to forecast our future performance and our financial results may fluctuate unpredictably.

Our limited commercial history and the rapid evolution of the markets for medical technologies and aesthetic products make it difficult for us to predict our future performance. A number of factors, many of which are outside of our control, may contribute to fluctuations in our financial results, such as:

 

physician demand for the ARTAS System and procedure usage may vary from quarter to quarter;

 

the inability of physicians to obtain the necessary financing to purchase the ARTAS System;

 

changes in the length of our sales process for the ARTAS System;

 

performance of our international distributors;

 

positive or negative media coverage of the ARTAS System, the procedures or products of our competitors, or our industry generally;

 

our ability to maintain our current, or obtain further, regulatory clearances or approvals;

 

delays in, or failure of, product and component deliveries by our third-party manufacturers or suppliers;

 

seasonal or other variations in patient demand for aesthetic procedures;

 

introduction of new aesthetic procedures or products that compete with the ARTAS System;

 

changes in accounting rules that may cause restatement of our consolidated financial statements or have other adverse effects; and

 

adverse changes in the economy that reduce patient demand for elective aesthetic procedures.

The long sales cycl e , low unit volume for sales of the ARTAS System and the historic seasonality of our industry, each may contribute to substantial fluctuations in our operating results and stock price and make it difficult to compare our results of operations to prior periods and predict future financial results.

We sell a relatively small number of ARTAS Systems at a relatively high price, with each sale of an ARTAS System typically involving a significant amount of time. Because of the relatively small number of ARTAS Systems we expect to sell in any period, each sale of the ARTAS System could represent a significant percentage of our revenue for a particular period. Furthermore, due to the significant amount of time it can take to finalize the sale of an ARTAS System, it is likely that a sale could be recognized in a subsequent period which could have a material effect on our results from quarter to quarter and increase the volatility of quarterly results. In addition, our industry is characterized by seasonally lower demand during the third quarter of the calendar year, generally when both physicians and prospective patients take summer vacation. As a result of these factor s , future fluctuations in quarterly results could cause our revenue and cash flows to be below analyst and investor expectations, which could cause decline in our stock price. Due to future fluctuations in revenue and costs, as well as other potential fluctuations, you should not rely upon our operating results in any particular period as an indication of future performance. If we do not sell ARTAS Systems as anticipated, our operating results will vary significantly from our expectations. In addition, selling the ARTAS System requires significant marketing effort and expenditure in advance of the receipt of revenue and our efforts may not result in a sale.

Our recurring losses from operations and negative cash flows have raised substantial doubt regarding our ability to continue as a going concern.

Our independent registered public accounting firm included an explanatory paragraph in its report on our consolidated financial statements as of, and for the year ended, December 31, 2017 that our recurring losses from operations and negative cash flows raise substantial doubt about our ability to continue as a going concern. Our ability to continue as a going concern will require us to obtain additional financing to fund our operations. The perception of our ability to continue as a going concern may make it more difficult for us to obtain financing for the continuation of our operations and could result in the loss of confidence by investors, suppliers and employees.

 

23


 

We will require substantial additional financing to achieve our goals, and a failure to obtain this necessary capital when needed on acceptable terms, or at all, could force us to delay, limit, reduce or terminate our product development, commercialization and other operations or efforts.

Since our inception, we have invested a significant portion of our efforts and financial resources in research and development and sales and marketing activities. Research and development, clinical trials, product engineering, ongoing product upgrades and other enhancements such as software-updates for the ARTAS System, and seeking regulatory clearances and approvals to market future products, including the robotic implantation functionality which is in clinical developmen t , will require substantial funds to complete. As of December 31, 2017, we had capital resources consisting of cash and cash equivalents of $23.5 million. In connection with our initial public offering (IPO), we raised an additional $22.1 million of proceeds, net of underwriting discounts and commissions and offering expenses. We believe that we will continue to expend substantial resources for the foreseeable future in connection with the ongoing commercializing of the ARTAS System, increasing our sales and marketing efforts, and continuing research and development and product enhancements activities.

We believe our existing cash and cash equivalents (inclusive of the net proceeds from our IPO and the issuance of the Convertible Notes) and cash expected to be generated from the sale of our products, will not be sufficient for us to fund our planned operations for the next twelve months. Therefore, we will need additional capital to fund our future operations.  In addition, our operating plans may change as a result of many factors some of which may be unknown to us, and we may need to seek additional funds sooner than planned, through public or private equity or debt financings or other sources, such as strategic collaborations. Such financing may result in dilution to stockholders, imposition of burdensome debt covenants and repayment obligations, the licensing of rights to our technology or other restrictions that may affect our business. In addition, we may seek additional capital due to favorable market conditions or strategic considerations even if we believe we have sufficient funds for our current or future operating plans.

Additional funds may not be available when we need them, on terms that are acceptable to us, or at all. If adequate funds are not available to us on a timely basis, we may be required to:

 

delay or curtail our efforts to develop enhancements to the ARTAS System, including any clinical trials that may be required to market such enhancements;

 

delay or curtail our plans to increase and expand our sales and marketing efforts; or

 

delay or curtail our plans to enhance our customer support and marketing activities.

We are restricted by covenants in our term loan agreement with Oxford Finance LLC, or Oxford. These covenants restrict, among other things, our ability to incur additional debt without Oxford’s consent, which may limit our ability to obtain additional funds.

We are dependent upon the success of the ARTAS System, which has a limited commercial history. If we are unsuccessful in developing the market for robotic hair restoration or the market acceptance for the ARTAS System fails to grow significantly, our business and future prospects will be harmed.

We commenced commercial sales of the ARTAS System for hair follicle dissection in the U.S. in 2011, and expect that the revenue we generate from both system sales and servicing as well as recurring procedure based fees will account for all of our revenue for the foreseeable future. Accordingly, our success depends on the acceptance among physicians and patients of the ARTAS System as the preferred system for performing hair restoration surgery. Acceptance of the ARTAS System by physicians is significantly dependent on our ability to convince physicians of the benefits of the ARTAS System to their practices and, accordingly, develop the market for robotic-assisted hair restoration surgery. Acceptance of the ARTAS procedure by patients is equally important as patient demand will influence physicians to offer the ARTAS procedure. Although we have received FDA clearance to market the ARTAS System for the harvesting of hair follicles for transplant in the U.S. and the ARTAS System is otherwise authorized for marketing in 61 international countries, the degree of market acceptance of the ARTAS System by physicians and patients is unproven. We believe that market acceptance of the ARTAS System will depend on many factors, including:

 

the perceived advantages or disadvantages of the ARTAS System compared to other hair restoration products and treatments;

 

the safety and efficacy of the ARTAS System relative to other hair restoration products and treatments;

 

24


 

 

the price of the ARTAS System relative to other hair restoration products and treatments;

 

our success in expanding our sales and marketing organization;

 

the effectiveness of our marketing, advertising, and commercialization initiatives;

 

our success in adding new functionalities to the ARTAS System and enhancing existing functions; and

 

our ability to obtain regulatory clearance to market the ARTAS System for additional treatment indications in the U.S.

We cannot provide assurance that the ARTAS System will achieve broad market acceptance among physicians and patients. Because we expect to derive substantially all of our revenue for the foreseeable future from ARTAS System sales, servicing and procedure based fees, any failure of this product to satisfy physician or patient demand or to achieve meaningful market acceptance will harm our business and future prospects.

If there is not sufficient patient demand for ARTAS procedures, our financial results and future prospects will be harmed.

The ARTAS procedure is an elective aesthetic procedure, the cost of which must be borne by the patient, and is not covered by or reimbursable through government or private health insurance. The decision to undergo the ARTAS procedure is thus driven by patient demand, which may be influenced by a number of factors, such as:

 

the success of our sales and marketing programs;

 

the extent to which our physician customers recommend the ARTAS System to their patients;

 

our success in attracting consumers who have not previously undergone hair restoration treatment;

 

the extent to which the ARTAS procedure satisfies patient expectations;

 

our ability to properly train our physician customers in the use of the ARTAS System so that their patients do not experience excessive discomfort during treatment or adverse side effects;

 

the cost, safety, and effectiveness of the ARTAS System versus other aesthetic treatments; consumer sentiment about the benefits and risks of aesthetic procedures generally and the ARTAS System in particular;

 

the success of any direct-to-consumer marketing efforts we may initiate; and

 

general consumer confidence, which may be impacted by economic and political conditions outside of our control.

Our financial performance will be materially harmed in the event we cannot generate significant patient demand for procedures performed with the ARTAS System.

Our success depends in part upon patient satisfaction with the effectiveness of the ARTAS System.

In order to generate repeat and referral business, patients must be satisfied with the effectiveness of the ARTAS System. If the ARTAS System procedure is not done correctly, and/or the patient suffers from complications and other adverse effects, the patient may not be satisfied with the benefits of the ARTAS System. Furthermore, if the transplanted hair follicles do not grow or survive the transplant, the patient will likely not view the procedure as having a satisfactory outcome. If patients are not satisfied with the aesthetic benefits of the ARTAS System, or feel that it is too expensive for the results obtained, our reputation and future sales will suffer.

Our success depends on growing physician adoption and use of the ARTAS System.

Our ability to increase the number of physicians willing to make a significant capital expenditure to purchase the ARTAS System, and make it a significant part of their practices, depends on the success of our sales and marketing programs. We must be able to demonstrate that the cost of the ARTAS System and the revenue that a physician can derive from performing ARTAS procedures are compelling when compared to the costs and revenue associated with alternative aesthetic treatments the physician can offer. In addition, we believe our marketing programs, including clinical and practice development support, will be critical to increasing awareness of the ARTAS System, but these programs require physician commitment and involvement to succeed. If we are unable to increase physician adoption and use of the ARTAS System, our financial performance will be adversely affected.

 

25


 

Our inability to effectively compete with competitive hair restoration treatments or procedures may prevent us from achieving significant market penetration or improving our operating results.

The medical technology and aesthetic product markets are highly competitive and dynamic, and are characterized by rapid and substantial technological development and product innovations. We designed the ARTAS System to assist physicians in performing FUE surgery. Demand for the ARTAS System and ARTAS procedures could be limited by other products and technologies. Competition to address hair loss comes from various sources, including:

 

therapeutic options including Rogaine, which is applied topically, and Propecia, which is ingested, both of which have been approved by the FDA;

 

non-surgical options, such as wigs, hair-loss concealer sprays and similar products; and

 

other surgical alternatives, including hair transplantation surgery using the strip surgery method or using hand-held devices.

Surgical alternatives to the ARTAS System may be able to compete more effectively than the ARTAS procedure in established practices with trained staff and workflows built around performing these surgical alternatives.

Practices experienced in offering strip surgery or follicular unit extractions using hand-held devices, or manual FUE, may be reluctant to incorporate, or convert their practices to offer ARTAS procedures due the effort involved to make such changes.

Many options may be able to provide satisfactory results for male hair loss, generally at a lower cost to the patient than the ARTAS System. As a result, if patients choose these competitive alternatives, our results of operation could be adversely affected.

We also face competition from other aesthetic devices that physicians may consider adding to their practice in lieu of building a hair restoration practice, for instance CoolSculpting, which is utilized for body contouring or cosmetic fat reduction. As a result, if physicians choose these competitive products over building a hair restoration practice with the ARTAS System, our results of operation could be adversely affected.

Some of our competitors have a broad range of product offerings, large direct sales forces, and long-term customer relationships with our target physicians, which could inhibit our market penetration efforts. Our potential physician customers also may need to recoup the cost of expensive products that they have already purchased from our competitors, and thus they may decide to delay purchasing, or not to purchase, the ARTAS System.

Many of our competitors are large, experienced companies that have substantially greater resources and brand recognition than we do. Competition could result in price-cutting, reduced profit margins, and limited market share, any of which would harm our business, financial condition, and results of operations.

For additional information regarding our competition, see the section of this Annual Report on Form 10-K captioned “Business— Competition.”

We may not be able to establish or strengthen our brand.

We believe that establishing and strengthening the Restoration Robotics and ARTAS brand is critical to achieving widespread acceptance of the ARTAS System, particularly because of the highly competitive nature of the market for aesthetic treatments and procedures to address male hair loss. Promoting and positioning our brand will depend largely on the success of our marketing efforts and our ability to provide physicians with a reliable product to assist them in performing hair restoration surgery. Given the established nature of our competitors, and our limited commercialization in the U.S., it is likely that our future marketing efforts will require us to incur significant additional expenses. These brand promotion activities may not yield increased sales and, even if they do, any sales increases may not offset the expenses we incur to promote our brand. If we fail to successfully promote and maintain our brand, or if we incur substantial expenses in an unsuccessful attempt to promote and maintain our brand, the ARTAS System may not be accepted by physicians, which would adversely affect our business, results of operations and financial condition.

We have limited experience with our direct sales and marketing force and any failure to build and manage our direct sales and marketing force effectively could have a material adverse effect on our business.

We rely on a direct sales force to sell the ARTAS System in the U.S. and certain markets outside the U.S. In order to meet our anticipated sales objectives, we expect to grow our direct sales and marketing organization significantly

 

26


 

over the next several years and intend to opportunistically build a direct sales and marketing force in certain international markets where we do not have a direct sales force. There are significant risks involved in building and managing our sales and marketing organization, including risks related to our ability to:

 

hire qualified individuals as needed;

 

generate sufficient leads within our target physician group for our sales force;

 

provide adequate training for the effective sale and marketing of the ARTAS System;

 

retain and motivate our direct sales and marketing professionals; and

 

effectively oversee geographically dispersed sales and marketing teams.

Our failure to adequately address these risks could have a material adverse effect on our ability to increase sales and use of the ARTAS System, which would cause our revenue to be lower than expected and harm our results of operations.

To market and sell the ARTAS System in certain markets outside of the U.S., we depend on third-party distributors.

We depend on third-party distributors to sell, market, and service the ARTAS Systems in certain markets outside of the U.S. and to train our physician customers in such markets. Furthermore, we may need to engage additional third-party distributors to expand into new markets outside of the U.S. where we do not have a direct sales force. We are subject to a number of risks associated with our dependence on these third-parties, including:

 

the lack of day-to-day control over the activities of third-party distributors;

 

third-party distributors may not commit the necessary resources to market, sell, train, support and service our systems to the level of our expectations;

 

third-party distributors may emphasize the sale of third-party products over our products;

 

third-party distributors may not be as selective as we would be in choosing physicians to purchase the ARTAS System or as effective in training physicians in marketing and patient selection;

 

third-party distributors may violate applicable laws and regulations which may expose us to potential liability or limit our ability to sell products in certain markets

 

third-party distributors may terminate their arrangements with us on limited, or no, notice or may change the terms of these arrangements in a manner unfavorable to us; and

 

disagreements with our distributors that could require or result in costly and time-consuming litigation or arbitration which we could be required to conduct in jurisdictions with which we are not familiar.

If we fail to establish and maintain satisfactory relationships with our third-party distributors, our revenue and market share may not grow as anticipated, and we could be subject to unexpected costs which would harm our results of operations and financial condition.

To successfully market and sell the ARTAS System in markets outside of the U.S., we must address many international business risks with which we have limited experience.

Sales in markets outside of the U.S. accounted for approximately 58%, 57%, and 52% of our revenue for the year ended December 31, 2017, 2016, and 2015, respectively. We believe that a significant percentage of our business will continue to come from sales in markets outside of the U.S. through increased penetration in countries where we market and sell the ARTAS System, and with expansion into new international markets. However, international sales are subject to a number of risks, including:

 

difficulties in staffing and managing our international operations;

 

increased competition as a result of more products and procedures receiving regulatory approval or otherwise free to market in international markets;

 

longer accounts receivable payment cycles and difficulties in collecting accounts receivable;

 

reduced or varied protection for intellectual property rights in some countries;

 

27


 

 

export restrictions, trade regulations, and foreign tax laws;

 

fluctuations in currency exchange rates;

 

foreign certification and regulatory clearance or approval requirements;

 

difficulties in developing effective marketing campaigns in unfamiliar foreign countries;

 

customs clearance and shipping delays;

 

political, social, and economic instability abroad, terrorist attacks, and security concerns in general;

 

preference for locally produced products;

 

potentially adverse tax consequences, including the complexities of foreign value-added tax systems, tax inefficiencies related to our corporate structure, and restrictions on the repatriation of earnings;

 

the burdens of complying with a wide variety of foreign laws and different legal standards; and

 

increased financial accounting and reporting burdens and complexities.

If one or more of these risks were realized, our results of operations and financial condition could be adversely affected.

While traditional hair transplantation surgery has been available for many years, the ARTAS System has only been commercially available since 2011. As a result, we have a limited track record compared to traditional hair transplantation surgery and the safety and efficacy of the ARTAS System is not yet supported by long-term clinical data, which could limit sales, and the ARTAS System could prove to be less safe or effective than initially thought.

The ARTAS System that we market in the U.S. is regulated as a medical device by the U.S. Food and Drug Administration, or the FDA, and has received premarket clearance under Section 510(k) of the U.S. Federal Food, Drug and Cosmetic Act, or FDCA. In the 510(k) clearance process, before a device may be marketed, the FDA must determine that a proposed device is “substantially equivalent” to a legally-marketed “predicate” device, which includes a device that has been previously cleared through the 510(k) process, a device that was legally marketed prior to May 28, 1976 (preamendments device), a device that was originally on the U.S. market pursuant to an approved premarket approval, or PMA, application and later downclassified, or a 510(k)-exempt device. This process is typically shorter and generally requires the submission of less supporting documentation than the FDA’s PMA process and does not always require long-term clinical studies.

Hair transplantation surgery has been a treatment option for hair restoration for many years, while we only began commercializing the ARTAS System in 2011. Consequently, we lack the breadth of published long-term clinical data supporting the safety and efficacy of the ARTAS System and the benefits it offers that might have been generated in connection with other hair restoration techniques. As a result, physicians may be slow to adopt the ARTAS System, we may not have comparative data that our competitors have or are generating, and we may be subject to greater regulatory and product liability risks. Furthermore, future patient studies or clinical experience may indicate that treatment with the ARTAS System does not improve patient outcomes compared to other hair restoration techniques. Such results would slow the adoption of the ARTAS System by physicians, would significantly reduce our ability to achieve expected sales and could prevent us from achieving and maintaining profitability.

We have limited complication or patient success rate data with respect to treatment using the ARTAS System. If future patient studies or clinical testing do not support our belief that our system offers a more advantageous treatment for hair restoration, market acceptance of the ARTAS System could fail to increase or could decrease and our business could be harmed. Moreover, if future results and experience indicate that our implant products cause unexpected or serious complications or other unforeseen negative effects, we could be subject to mandatory product recalls, suspension or withdrawal of FDA or other governmental clearance or approval or, CE Certificates of Conformity, significant legal liability or harm to our business reputation. Furthermore, if patients that receive traditional hair transplantation surgery, such as strip surgery, were to experience unexpected or serious complications or other unforeseen effects, the market for the ARTAS System may be adversely affected, even if such effects are not applicable to the ARTAS System.

 

28


 

If we choose to, or are required to, conduct additional studies, such studies or experience could, slow the market adoption of the ARTAS System by physicians, significantly reduce our ability to achieve expected revenue and prevent us from becoming profitable .

We rely on a single third-party manufacturer for the manufacturing of the ARTAS System.

Evolve Manufacturing Technologies, Inc., or Evolve, assembles the ARTAS System, and produces reusable procedure kits, disposable procedure kits, upgrade kits and spare kits used with the ARTAS System. If the operations of Evolve are interrupted or if it is unable or unwilling to meet our delivery requirements due to capacity limitations or other constraints, we may be limited in our ability to fulfill new customer orders, to provide kits required for use with existing ARTAS Systems and to repair equipment at current customer sites. Any change to another contract manufacturer would likely entail significant delay, require us to devote substantial time and resources, and could involve a period in which our products could not be produced in a timely or consistently high-quality manner, any of which could harm our reputation and results of operations.

We have two master agreements and a component pricing agreement with Evolve for the supply of the ARTAS System and consumable products, including reusable procedure kits, disposable procedure kits, upgrade kits and spare kits used with the ARTAS System, pursuant to both of which we make purchases on a purchase order basis. The terms of these master agreements are substantially similar. The master agreement for the sale of ARTAS Systems was effective beginning on April 1, 2016 and the master agreement for the sale of kits used with the ARTAS System was effective beginning on March 1, 2016. Both agreements are effective for an initial term of two years and will continue to automatically renew for additional twelve month periods, subject to either party’s right to terminate the agreement upon 180 days advance notice during the initial term if our quarterly forecasted demand falls below 75% of our historical forecasted demand for the same period in the previous year or upon 120 days’ advance notice after the initial term. Our agreement with Evolve for the pricing of certain components at certain quantities was effective on August 1, 2016 and expires on August 1, 2018. Otherwise, Evolve is not required, and may not be able or willing, to meet our future requirements at current prices, or at all.

Additionally our component suppliers contract directly with Evolve and we have limited control over the components they supply or the timeliness by which they supply them. Evolve may be unable to acquire components at the quantities and prices at which we need them.

In addition, our reliance on Evolve involves a number of other risks, including, among other things, that:

 

our products may not be manufactured in accordance with agreed upon specifications or in compliance with regulatory requirements, or its manufacturing facilities may not be able to maintain compliance with regulatory requirements, which could negatively affect the safety or efficacy of our products, cause delays in shipments of our products, or require us to recall products previously delivered to customers;

 

we may not be able to timely respond to unanticipated changes in customer orders, and if orders do not match forecasts, we may have excess or inadequate inventory of materials and components;

 

we may be subject to price fluctuations when a supply contract is renegotiated or if our existing contract is not renewed;

 

Evolve may wish to discontinue manufacturing and supplying products to us; and

 

Evolve may encounter financial or other hardships unrelated to our demand for products, which could inhibit its ability to fulfill our orders and meet our requirements.

If any of these risks materialize, it could significantly increase our costs, our ability to generate net sales would be impaired, market acceptance of our products could be adversely affected and customers may instead purchase or use our competitors’ products, which could have a materially adverse effect on our business, financial condition and results of operations.

Furthermore, if we are required to change the manufacturer of a critical component of the ARTAS System, we will be required to verify that the new manufacturer maintains facilities, procedures and operations that comply with our quality and applicable regulatory requirements, which could further impede our ability to manufacture the ARTAS System in a timely manner. Transitioning to a new supplier could be time-consuming and expensive, may result in interruptions in our operations and product delivery, could affect the performance specifications of the ARTAS System or could require that we modify the design of those systems. If the change in manufacturer results in a

 

29


 

significant change to any product, a new 510(k) clearance from the FDA or similar international regulatory authorization may be necessary before we implement the change, which could ca use substantial delays. The occurrence of any of these events could harm our ability to meet the demand for our products in a timely or cost-effective manner.

We cannot provide assurance that we will be able to secure alternative equipment and materials and utilize such equipment and materials without experiencing interruptions in our workflow. If we should encounter delays or difficulties in securing, reconfiguring or revalidating the equipment and components we require for the ARTAS System, our reputation, business, financial condition and results of operations could be negatively impacted.

If Evolve is unable to manufacture the ARTAS System in high-quality commercial quantities successfully and consistently to meet demand, our growth will be limited.

To manufacture our ARTAS System in the quantities that we believe will be required to meet anticipated market demand, Evolve will need to increase manufacturing capacity, which will involve significant challenges. In addition, the development of commercial-scale manufacturing capabilities will require us and Evolve to invest substantial additional funds and hire and retain the technical personnel who have the necessary manufacturing experience. Neither we nor our third-party manufacturer may successfully complete any required increase to existing manufacturing processes in a timely manner, or at all.

If Evolve is unable to produce the ARTAS System, reusable procedure kits, disposable procedure kits, upgrade kits and spare kits in sufficient quantities to meet anticipated customer demand, our revenue, business, and financial prospects would be harmed. The limited experience Evolve has in producing larger quantities of the ARTAS System and kits may also result in quality issues, and possibly result in product recalls. Manufacturing delays related to quality control could harm our reputation, and decrease our revenue. Any recall could be expensive and generate negative publicity, which could impair our ability to market the ARTAS System and procedures and further affect our results of operations.

Evolve’s manufacturing operations are dependent upon third-party suppliers and, in some cases, sole suppliers, for the majority of our components, subassemblies and materials, making us vulnerable to supply shortages and price fluctuations, which could harm our business.

Evolve relies on several sole source suppliers, including Stäubli Corporation, FLIR Integrated Imaging Solutions Inc. and Preproduction Plastics Inc., for certain components of the ARTAS System, reusable procedure kits, disposable procedure kits, upgrade kits, and spare kits. These sole suppliers, and any of our other suppliers, may be unwilling or unable to supply components of these systems to Evolve reliably and at the levels we anticipate or are required by the market. For us to be successful, our third-party manufacturer and its suppliers must be able to provide products and components in substantial quantities, in compliance with regulatory requirements, in accordance with agreed upon specifications, at acceptable costs and on a timely basis. An interruption in our commercial operations could occur if we or Evolve encounter delays or difficulties in securing these components, and if we cannot then obtain an acceptable substitute. If we are required to transition to new third-party suppliers for certain components of the ARTAS System, we believe that there are only a few such suppliers that are capable of supplying the necessary components. A supply interruption, price fluctuation or an increase in demand beyond our current suppliers’ capabilities could harm Evolve’s ability to manufacture the ARTAS System until new sources of supply are identified and qualified. In addition, the use of components or materials furnished by these alternative suppliers could require us to alter our operations.

Our reliance on these suppliers subjects us to a number of risks that could harm our reputation, business, and financial condition, including, among other things:

 

interruption of supply resulting from modifications to or discontinuation of a supplier’s operations;

 

delays in product shipments resulting from uncorrected defects, reliability issues, or a supplier’s variation in a component;

 

a lack of long-term supply arrangements for key components with our suppliers;

 

inability to obtain adequate supply in a timely manner, or to obtain adequate supply on commercially reasonable terms;

 

30


 

 

difficulty and cost associated with locating and qualifying alternative suppliers for our components in a timely manner;

 

production delays related to the evaluation and testing of products from alternative suppliers, and corresponding regulatory qualifications;

 

delay in delivery due to our suppliers prioritizing other customer orders over ours;

 

damage to our reputation caused by defective components produced by our suppliers;

 

increased cost of our warranty program due to product repair or replacement based upon defects in components produced by our suppliers; and

 

fluctuation in delivery by our suppliers due to changes in demand from us or their other customers.

Where practicable, we are seeking, or intending to seek, second-source manufacturers for certain of our components. However, we cannot provide assurance that we will be successful in establishing second-source manufacturers or that the second-source manufacturers will be able to satisfy commercial demand for the ARTAS System.

If any of these risks materialize, costs could significantly increase and our ability to meet demand for our products could be impacted. If we are unable to satisfy commercial demand for the ARTAS System in a timely manner, our ability to generate revenue would be impaired and market acceptance of our products could be adversely affected.

We forecast sales to determine requirements for components and materials used in the ARTAS System, reusable procedure kits, disposable procedure kits, upgrade kits and spare kits and if our forecasts are incorrect, we may experience delays in shipments or increased inventory costs.

We keep limited finished products on hand. To manage our operations, we forecast anticipated product orders and material requirements to predict our inventory needs and enter into purchase orders on the basis of these requirements. Several components of the ARTAS System require significant order lead time. Our limited historical commercial experience and anticipated growth may not provide us with enough data to consistently and accurately predict future demand. If our business expands and our demand for components and materials increases beyond our estimates, our manufacturers and suppliers may be unable to meet our demand. In addition, if we underestimate our component and material requirements, we may have inadequate inventory, which could interrupt, delay, or prevent delivery of the ARTAS System and related products to our customers. In contrast, if we overestimate our requirements, we may have excess inventory, which would increase use of our working capital. Any of these occurrences would negatively affect our financial condition and the level of satisfaction our physician customers have with our business.

Even though the ARTAS System is marketed to physicians, there exists a potential for misuse by the operator of the ARTAS System by physicians, non-physicians or individuals who are not sufficiently trained, which could harm our reputation and our business.

We and our independent distributors market and sell the ARTAS System to physicians. Under state law in the U.S., our physician customers can generally allow nurse practitioners, technicians, and other non-physicians to perform the ARTAS procedures under their direct supervision. Similarly, in markets outside of the U.S., physicians can allow non-physicians to perform the ARTAS procedures under their supervision. Although we and our distributors provide training on the use of the ARTAS System, we do not thereafter supervise the procedures performed with the ARTAS System, nor can we be assured that direct physician supervision of procedures occurs according to our recommendations. The potential misuse of the ARTAS System by physicians and non-physicians may result in adverse treatment outcomes, which could harm our reputation and expose us to costly product liability litigation.

We and our distributors offer product training sessions, but neither we nor our distributors require purchasers or operators of our products to attend training sessions. The lack of required training for operators of our product and the use of our products by non-physicians may result in product misuse and adverse treatment outcomes, which could harm our reputation and expose us to costly product liability litigation.

 

31


 

Product liability suits could be brought against us for defective design, labeling, material, or workmanship, or misuse of the A RTAS System, and could result in expensive and time-consuming litigation, payment of substantial damages, an increase in our insurance rates and substantial harm to our reputation.

If the ARTAS System is defectively designed, manufactured, or labeled, contains defective components, or is misused, we may become subject to substantial and costly litigation by our physician customers or their patients. Misuse of the ARTAS System or failure to adhere to operating guidelines can cause skin damage and underlying tissue damage and, if our operating guidelines are found to be inadequate, we may be subject to liability.

Furthermore, if a patient is injured in an unexpected manner or suffers unanticipated adverse events after undergoing the ARTAS procedure, even if the procedure was performed in accordance with our operating guidelines, we may be subject to product liability claims. Claims could also be asserted under state consumer protection acts. If we cannot successfully defend ourselves against product liability claims, we may incur substantial liabilities. Even successful defense would require significant financial and management resources. Regardless of the merits or eventual outcome, liability claims may result in:

 

decreased demand for the ARTAS System or any future products;

 

damage to our reputation;

 

withdrawal of clinical trial participants;

 

costs to defend the related litigation;

 

a diversion of management’s time and our resources;

 

substantial monetary awards to physician customers, patients or clinical trial participants;

 

regulatory investigations, product recalls, withdrawals or labeling, marketing or promotional restrictions;

 

loss of revenue; and

 

the inability to commercialize any future products.

Our inability to obtain and maintain sufficient product liability insurance at an acceptable cost and scope of coverage to protect against potential product liability claims could inhibit commercialization of the ARTAS System. We carry product liability insurance in the amount of $4.0 million in the aggregate. Although we maintain such insurance, any claim that may be brought against us could result in a court judgment or settlement in an amount that is not covered, in whole or in part, by our insurance or that is in excess of the limits of our insurance coverage. Our insurance policies also have various exclusions and deductibles, and we may be subject to a product liability claim for which we have no coverage. We will have to pay any amounts awarded by a court or negotiated in a settlement that exceed our coverage limitations or that are not covered by our insurance, and we may not have, or be able to obtain, sufficient funds to pay such amounts. Moreover, in the future, we may not be able to maintain insurance coverage at a reasonable cost or in sufficient amounts to protect us against losses.

Our ability to market the ARTAS System in the U.S. is limited to hair follicle dissection in males that have black or brown straight hair, and if we want to expand our marketing claims, we will need to obtain additional FDA clearances or approvals, which may not be granted.

We have FDA clearance to market the ARTAS System in the U.S. for dissecting hair follicles only from the scalp in men diagnosed with androgenic alopecia, or AGA, also referred to as male pattern baldness, who have black or brown straight hair. This clearance restricts our ability to market or advertise the ARTAS System treatment for women or men who do not have black or brown straight hair, which could limit physician and patient adoption of the ARTAS System. Furthermore, while we have submitted a 510(K) application for our robotic implantation functionality, we have not yet received FDA clearance for the robotic implantation functionality which is in clinical development. Developing and promoting new treatment indications and protocols for the ARTAS System, as well as receiving regulatory approval for the commercialization of the robotic implantation functionality which is in clinical development, are elements of our growth strategy, but we cannot predict when or if we will receive the clearances required to so implement those elements. In addition, we may be required to conduct additional clinical trials or studies to support our applications, which may be time-consuming and expensive, and may produce results that do not result in FDA clearances. In the event that we do not obtain additional FDA clearances, our ability to promote the ARTAS System in the U.S. may be limited. Because we anticipate that sales in the U.S. will continue to

 

32


 

be a sign ificant portion of our business for the foreseeable future, ongoing restrictions on our ability to market the ARTAS System in the U.S. could harm our business and limit our revenue growth.

The clinical trial process required to obtain regulatory clearances or approvals is lengthy and expensive with uncertain outcomes, and could result in delays in new product introductions.

In order to obtain 510(k) clearance for the ARTAS System, we were required to conduct a clinical trial, and we expect to conduct clinical trials in support of marketing authorization for future products and product enhancements. Conducting clinical trials is a complex and expensive process, can take many years, and outcomes are inherently uncertain. We may suffer significant setbacks in clinical trials, even after earlier clinical trials showed promising results, and failure can occur at any time during the clinical trial process. Any of our products may malfunction or may produce undesirable adverse effects that could cause us or regulatory authorities to interrupt, delay or halt clinical trials. We, the FDA, or another regulatory authority may suspend or terminate clinical trials at any time to avoid exposing trial participants to unacceptable health risks.

Successful results of pre-clinical studies are not necessarily indicative of future clinical trial results, and predecessor clinical trial results may not be replicated in subsequent clinical trials. Additionally, the FDA may disagree with our interpretation of the data from our pre-clinical studies and clinical trials, or may find the clinical trial design, conduct or results inadequate to prove safety or efficacy, and may require us to pursue additional pre-clinical studies or clinical trials, which could further delay the clearance or approval of our products. The data we collect from our pre-clinical studies and clinical trials may not be sufficient to support FDA clearance or approval, and if we are unable to demonstrate the safety and efficacy of our future products in our clinical trials, we will be unable to obtain regulatory clearance or approval to market our products.

In addition, we may estimate and publicly announce the anticipated timing of the accomplishment of various clinical, regulatory and other product development goals, which are often referred to as milestones. These milestones could include the obtainment of the right to affix the CE Mark in the European Union; the submission to the FDA of an investigational device exemption, or IDE, application to commence a pivotal clinical trial for a new product; the enrollment of patients in clinical trials; the release of data from clinical trials; and other clinical and regulatory events. The actual timing of these milestones could vary dramatically compared to our estimates, in some cases for reasons beyond our control. We cannot assure you that we will meet our projected milestones and if we do not meet these milestones as publicly announced, the commercialization of our products may be delayed and, as a result, our stock price may decline.

Delays in the commencement or completion of clinical testing could significantly affect our product development costs. We do not know whether planned clinical trials will begin on time, need to be redesigned, enroll an adequate number of patients in a timely manner or be completed on schedule, if at all. The commencement and completion of clinical trials can be delayed or terminated for a number of reasons, including delays or failures related to:

 

the FDA or comparable foreign regulatory authorities disagreeing as to the design or implementation of our clinical studies;

 

obtaining regulatory approval to commence a clinical trial;

 

reaching agreement on acceptable terms with prospective clinical research organizations, or CROs, and trial sites, the terms of which can be subject to extensive negotiation and may vary significantly among different CROs and trial sites;

 

manufacturing sufficient quantities of a product for use in clinical trials;

 

obtaining institutional review board, or IRB, or ethics committees approval to conduct a clinical trial at each prospective site;

 

recruiting and enrolling patients and maintaining their participation in clinical trials;

 

having clinical sites observe trial protocol or continue to participate in a trial;

 

addressing any patient safety concerns that arise during the course of a clinical trial;

 

addressing any conflicts with new or existing laws or regulations; and

 

adding a sufficient number of clinical trial sites.

 

33


 

Patient enrollment in clinical trials and completion of patient follow-up depend on many factors, including the size of the patient population, the nature of the trial protocol, the proximity of patients to clinical sites, the eligibility criteria for the clinical trial, patient compliance, c ompeting clinical trials and clinicians’ and patients’ perceptions as to the potential advantages of the product being studied in relation to other available therapies, including any new treatments that may be cleared or approved for the indications we are investigating. For example, patients may be discouraged from enrolling in our clinical trials if the trial protocol requires them to undergo extensive post-treatment procedures or follow-up to assess the safety and efficacy of a product, or they may be pe rsuaded to participate in contemporaneous clinical trials of a competitor’s product. In addition, patients participating in our clinical trials may drop out before completion of the trial or suffer adverse medical events unrelated to our products. Delays in patient enrollment or failure of patients to continue to participate in a clinical trial may delay commencement or completion of the clinical trial, cause an increase in the costs of the clinical trial and delays, or result in the failure of the clinica l trial.

We could also encounter delays if the FDA concluded that our financial relationships with our principal investigators resulted in a perceived or actual conflict of interest that may have affected the interpretation of a study, the integrity of the data generated at the applicable clinical trial site or the utility of the clinical trial itself. Principal investigators for our clinical trials may serve as scientific advisors or consultants to us from time to time and receive cash compensation and/or stock options in connection with such services. If these relationships and any related compensation to or ownership interest by the clinical investigator carrying out the study result in perceived or actual conflicts of interest, or the FDA concludes that the financial relationship may have affected interpretation of the study, the integrity of the data generated at the applicable clinical trial site may be questioned and the utility of the clinical trial itself may be jeopardized, which could result in the delay or rejection of our marketing application by the FDA. Any such delay or rejection could prevent us from commercializing any of our products in development.

Furthermore, clinical trials may also be delayed as a result of ambiguous or negative interim results. In addition, a clinical trial may be suspended or terminated by us, the FDA, the IRB overseeing the clinical trial at issue, the Data Safety Monitoring Board for such trial, any of our clinical trial sites with respect to that site, or other regulatory authorities due to a number of factors, including:

 

failure to conduct the clinical trial in accordance with applicable regulatory requirements or our clinical protocols;

 

inspection of the clinical trial operations or trial sites by the FDA or other regulatory authorities resulting in the imposition of a clinical hold;

 

inability of a clinical investigator or clinical trial site to continue to participate in the clinical trial;

 

unforeseen safety issues or adverse side effects;

 

failure to demonstrate a benefit from using the product; and

 

lack of adequate funding to continue the clinical trial.

Additionally, changes in regulatory requirements and guidance may occur and we may need to amend clinical trial protocols to reflect these changes. Amendments may require us to resubmit our clinical trial protocols to IRBs for reexamination, which may impact the costs, timing or successful completion of a clinical trial. If we experience delays in completion of, or if we terminate, any of our clinical trials, the commercial prospects for our products may be harmed and our ability to generate product revenue from these products will be delayed or not realized at all. In addition, any delays in completing our clinical trials will increase our costs, slow down our product development and approval process and jeopardize our ability to commence product sales and generate revenue. Any of these occurrences may significantly harm our business, financial condition and prospects significantly. In addition, many of the factors that cause, or lead to, a delay in the commencement or completion of a clinical trial may also ultimately lead to the denial of regulatory approval of the subject product.

Our business could be adversely affected if we are unable to extend the cleared uses of the ARTAS System or successfully pursue the development, regulatory clearance or approval and commercialization of future products.

Our only product is the ARTAS System for hair follicle dissection, which has been cleared for use in the U.S. only for dissecting hair follicles from the scalp in men diagnosed with AGA who have black or brown straight hair and recipient site making in which hair follicles are transplanted. The robotic implantation functionality, which we recently submitted a 510(K) application for, is currently in clinical development has not been cleared or approved

 

34


 

for commercial marketing in the U.S. Our business could be adversely affected if we are unable to extend the cleared uses of the ARTAS System or successfully purs ue the development, regulatory clearance or approval and commercialization of future products. In the future, we may also become dependent on other products that we may develop or acquire. The clinical and commercial success of our products will depend on a number of factors, including the following:

 

the ability to raise any additional required capital on acceptable terms, or at all;

 

timely completion of our nonclinical studies and clinical trials, which may be significantly slower or cost more than we anticipate and will depend substantially upon the performance of third-party contractors;

 

whether we are required by the FDA or similar foreign regulatory agencies to conduct additional clinical trials or other studies beyond those planned to support the clearance or approval and commercialization of any future indications or products;

 

our ability to demonstrate to the satisfaction of the FDA and similar foreign regulatory authorities the safety, efficacy and acceptable risk to benefit profile of any future indications or products;

 

the prevalence, duration and severity of potential side effects or other safety issues experienced with our future approved products, if any;

 

the timely receipt of necessary marketing approvals or clearances from the FDA and foreign regulatory authorities;

 

achieving and maintaining, and, where applicable, ensuring that our third-party contractors achieve and maintain, compliance with our contractual obligations and with all regulatory requirements applicable to any future products or additional approved indications, if any;

 

acceptance by physicians and patients of the benefits, safety and efficacy of any future products, if approved or cleared, including relative to alternative and competing treatments;

 

our ability to establish and enforce intellectual property rights in and to our products or any future indications or products; and

 

our ability to avoid third-party patent interference, intellectual property challenges or intellectual property infringement claims.

Even if regulatory approvals or clearances are obtained, we may never be able to successfully commercialize any future indications or products. Accordingly, we cannot provide assurances that we will be able to generate sufficient revenue through the sale of any future products to continue our business.

Our loan agreement contains restrictions that limit our flexibility in operating our business.

In May 2015, we entered into a term loan agreement with Oxford. We borrowed $20 million under the loan agreement with Oxford. Our loan agreement with Oxford also contains various covenants that limit our ability to engage in specified types of transactions. Subject to limited exceptions, these covenants limit our ability, without Oxford’s consent, to, among other things:

 

sell, lease, transfer, exclusively license or dispose of our assets;

 

create, incur, assume or permit to exist additional indebtedness or liens;

 

make restricted payments, including paying dividends on, repurchasing or making distributions with respect to our capital stock;

 

pay any cash dividend or make any other cash distribution or payment in respect of our capital stock in excess of $250,000 in aggregate per calendar year;

 

make specified investments (including loans and advances);

 

make changes to certain key personnel including our President and Chief Executive Officer;

 

merge, consolidate or liquidate; and

 

enter into certain transactions with our affiliates.

 

35


 

The covenants in our loan agreement with Oxford may limit our ability to take certain actions and, in the event that we breach one or more covenants, our lender may choose to declare an event of default and require that we immediately repay all amounts outstanding, terminate the commitment to extend further credit and foreclose on the collateral granted to it to collateralize such indebtedness.

We will need to increase the size of our organization, and we may experience difficulties in managing growth.

As of December 31, 2017, we had 87 employees, with 35 employees in sales and marketing, 15 employees in customer support, 21 employees in research and development, including clinical, regulatory and certain quality control functions, four employees in manufacturing operations and 12 employees in general management and administration. We will need to continue to expand our sales, marketing, managerial, operational, finance and administrative resources for the ongoing commercialization of the ARTAS System, and continue our development activities of any future products.

Our existing management, personnel, systems and facilities may not be adequate to support our future growth. Our need to effectively execute our growth strategy requires that we:

 

identify, recruit, retain, incentivize and integrate additional employees, including sales personnel;

 

manage our internal development and operational efforts effectively while carrying out our contractual obligations to third parties; and

 

continue to improve our operational, financial and management controls, reports systems and procedures.

If we fail to attract and retain senior management and key personnel, we may be unable to successfully grow our business.

Our success depends in part on our continued ability to attract, retain and motivate highly qualified management, clinical and other personnel. We are highly dependent upon our senior management, particularly our President and Chief Executive Officer, our management team and other key personnel. The loss of services of any of these individuals could delay or prevent enhancement of the ARTAS System, the expansion of the ARTAS System to new indications, or the development of any future products. Although we have entered into employment agreements with our senior management team, these agreements do not provide for a fixed term of service.

Competition for qualified personnel in the medical device field is intense due to the limited number of individuals who possess the skills and experience required by our industry. We will need to hire additional personnel and we may not be able to attract and retain quality personnel on acceptable terms, or at all. In addition, to the extent we hire personnel from competitors, we may be subject to allegations that they have been improperly solicited or that they have divulged proprietary or other confidential information, or that their former employers own their research output.

Because we have opted to take advantage of the JOBS Act provision which allows us to delay implementing new accounting standards, our consolidated financial statements may not be directly comparable to other public companies.

Pursuant to the Jumpstart Our Business Startups Act of 2012, or the JOBS Act, emerging growth companies can delay adopting new or revised accounting standards issued subsequent to the enactment of the JOBS Act until such time as those standards apply to private companies. We have elected to use this extended transition period for complying with new or revised accounting standards that have different effective dates for public and private companies until the earlier of the date we (i) are no longer an emerging growth company or (ii) affirmatively and irrevocably opt out of the extended transition period provided in the JOBS Act. Because we have elected to take advantage of this provision of the JOBS Act, our consolidated financial statements and the reported results of operations contained therein may not be directly comparable to other public companies.

We incur significant costs as a result of operating as a public company, and our management devotes substantial time to new compliance initiatives. We may fail to comply with the rules that apply to public companies, including Section 404 of the Sarbanes-Oxley Act of 2002, which could result in sanctions or other penalties that would harm our business.

We incur significant legal, accounting and other expenses as a public company, including costs resulting from public company reporting obligations under the Securities Exchange Act of 1934, as amended, and regulations

 

36


 

regarding corporate governance practices. The listing requirements of The Nasdaq Global Market and the rules of the Securities and Exchange Commission, or SEC, require that we satisfy certain corporate governance requirements relating to director independence, filing annual and interim reports, stockholder meetings, approvals and voting, soliciting proxies, conflicts of interest and a code of conduct. Our management and other personnel devote a substantial amount of time to ensure that we comply with all of these requirements. Moreover, the reporting requirements, rul es and regulations will continue to increase our legal and financial compliance costs and will make some activities more time-consuming and costly. Any changes we make to comply with these obligations may not be sufficient to allow us to satisfy our obligations as a public company on a timely basis, or at all. These reporting requirements, rules and regulations, coupled with the increase in potential litigation exposure associated with being a public company, could also make it more difficult for us t o attract and retain qualified persons to serve on our board of directors or board committees or to serve as executive officers, or to obtain certain types of insurance, including directors’ and officers’ insurance, on acceptable terms.

We are subject to Section 404 of The Sarbanes-Oxley Act of 2002, or Section 404, and the related rules of the SEC, which generally require our management and independent registered public accounting firm to report on the effectiveness of our internal control over financial reporting. Beginning with the second annual report that we will be required to file with the SEC, Section 404 requires an annual management assessment of the effectiveness of our internal control over financial reporting. However, for so long as we remain an emerging growth company as defined in the JOBS Act, we intend to take advantage of certain exemptions from various reporting requirements that are applicable to public companies that are not emerging growth companies, including, but not limited to, not being required to comply with the auditor attestation requirements of Section 404. Once we are no longer an emerging growth company or, if prior to such date, we opt to no longer take advantage of the applicable exemption, our independent registered public accounting firm will be engaged to provide an attestation report on the effectiveness of our internal control over financial reporting. We will remain an emerging growth company until the earlier of (1) the last day of the fiscal year (a)following the fifth anniversary of our initial public offering, (b) in which we have total annual gross revenue of at least $1.07 billion, or (c) in which we are deemed to be a large accelerated filer, which means the market value of our common stock that is held by non-affiliates exceeds $700.0 million as of the prior June 30th, and (2) the date on which we have issued more than $1.0 billion in non-convertible debt during the prior three-year period.

To date, we have never conducted a review of our internal control for the purpose of providing the reports required by these rules. During the course of our review and testing, we may identify deficiencies and be unable to remediate them before we must provide the required reports. Furthermore, if we have a material weakness in our internal controls over financial reporting, we may not detect errors on a timely basis and our consolidated financial statements may be materially misstated. We or our independent registered public accounting firm may not be able to conclude on an ongoing basis that we have effective internal control over financial reporting, which could harm our operating results, cause investors to lose confidence in our reported financial information and cause the market price of our stock to decline. In addition, as a public company we are required to file accurate and timely quarterly and annual reports with the SEC under the Securities Exchange Act of 1934, as amended. Any failure to report our financial results on an accurate and timely basis could result in sanctions, lawsuits, delisting of our shares from The Nasdaq Global Market or other adverse consequences that would materially harm to our business and cause the market price of our common stock to decline.

Unfavorable global economic conditions could adversely affect our business, financial condition or results of operations.

Our results of operations could be adversely affected by general conditions in the global economy and in the global financial markets. Furthermore, the market for aesthetic medical procedures may be particularly vulnerable to unfavorable economic conditions. In particular, the ARTAS procedures will not receive coverage and reimbursement and, as a result, demand for this product will be tied to discretionary spending levels of our targeted patient population. The recent global financial crisis caused extreme volatility and disruptions in the capital and credit markets. A severe or prolonged economic downturn, such as the recent global financial crisis, could result in a variety of risks to our business, including weakened demand for the ARTAS System, ARTAS procedures or any future products, if approved, and our ability to raise additional capital when needed on acceptable terms, if at all. A weak or declining economy could also strain our manufacturers or suppliers, possibly resulting in supply disruption, or cause our customers to delay making payments for our services. Any of the foregoing could harm our business and we cannot anticipate all of the ways in which the economic climate and financial market conditions could adversely impact our business.

 

37


 

We or the third parties upon whom we depend may be adversely affected by earthquakes or other natural disasters and our business continuity and disaster recovery plans may not adequ ately protect us from a serious disaster.

Our corporate headquarters and other facilities are located in San Jose, California, which in the past has experienced both severe earthquakes and floods. We do not carry earthquake or flood insurance. Earthquakes or other natural disasters could severely disrupt our operations, and have a material adverse effect on our business, results of operations, financial condition and prospects.

If a natural disaster, power outage or other event occurred that prevented us from using all or a significant portion of our headquarters, that damaged critical infrastructure, such as our ARTAS enterprise system, enterprise financial systems and records, manufacturing resource planning and enterprise quality systems, or that otherwise disrupted operations, it may be difficult or, in certain cases, impossible, for us to continue our business for a substantial period of time. The disaster recovery and business continuity plans we have in place are limited and are unlikely to prove adequate in the event of a serious disaster or similar event. We may incur substantial expenses as a result of the limited nature of our disaster recovery and business continuity plans, which, particularly when taken together with our lack of earthquake or flood insurance, could have a material adverse effect on our business.

Furthermore, integral parties in our supply chain are similarly vulnerable to natural disasters or other sudden, unforeseen and severe adverse events. If such an event were to affect our supply chain, it could have a material adverse effect on our business.

Significant disruptions of information technology systems or breaches of data security could materially adversely affect our business, results of operations and financial condition.

We collect and maintain information in digital form that is necessary to conduct our business, and we are increasingly dependent on information technology systems and infrastructure to operate our business. In the ordinary course of our business, we collect, store and transmit large amounts of confidential information, including intellectual property, proprietary business information and personal information. It is critical that we do so in a secure manner to maintain the confidentiality and integrity of such confidential information. We have established physical, electronic, and organizational measures to safeguard and secure our systems to prevent a data compromise, and rely on commercially available systems, software, tools, and monitoring to provide security for our information technology systems and the processing, transmission and storage of digital information. We have also outsourced elements of our information technology infrastructure, and as a result a number of third-party vendors may or could have access to our confidential information. Our internal information technology systems and infrastructure, and those of our current and any future collaborators, contractors and consultants and other third parties on which we rely, are vulnerable to damage from computer viruses, malware, natural disasters, terrorism, war, telecommunication and electrical failures, cyber-attacks or cyber-intrusions over the Internet, attachments to emails, persons inside our organization, or persons with access to systems inside our organization. The risk of a security breach or disruption, particularly through cyber-attacks or cyber intrusion, including by computer hackers, foreign governments, and cyber terrorists, has generally increased as the number, intensity and sophistication of attempted attacks and intrusions from around the world have increased. In addition, the prevalent use of mobile devices that access confidential information increases the risk of data security breaches, which could lead to the loss of confidential information or other intellectual property. The costs to us to mitigate network security problems, bugs, viruses, worms, malicious software programs and security vulnerabilities could be significant, and while we have implemented security measures to protect our data security and information technology systems, our efforts to address these problems may not be successful, and these problems could result in unexpected interruptions, delays, cessation of service and other harm to our business and our competitive position. If such an event were to occur and cause interruptions in our operations, it could result in a material disruption of our product development programs. Moreover, if a computer security breach affects our systems or results in the unauthorized release of personally identifiable information, our reputation could be materially damaged. In addition, such a breach may require notification to governmental agencies, the media or individuals pursuant to various federal and state privacy and security laws, if applicable, including the Health Insurance Portability and Accountability Act of 1996, or HIPAA, as amended by the Health Information Technology for Clinical Health Act of 2009, or HITECH, and its implementing rules and regulations, as well as regulations promulgated by the Federal Trade Commission , state breach notification laws and international privacy laws such as rules and regulations relating to data protection. We would also be exposed to a risk of loss or litigation and potential liability, which could materially adversely affect our business, results of operations and financial condition.

 

38


 

Our employees and independent contractors, including consultants, manufacturers, distributors, commercial collaborators, service providers and other vendors may engage in misconduct or other improper activities, including noncompliance with regulatory standards and requirements, which could have an adverse effect on our results of operations.

We are exposed to the risk that our employees and independent contractors, including consultants, manufacturers, distributors, commercial collaborators, service providers and other vendors may engage in misconduct or other illegal activity. Misconduct by these parties could include intentional, reckless and/or negligent conduct or other unauthorized activities that violate the laws and regulations of the FDA and other similar regulatory bodies, including those laws that require the reporting of true, complete and accurate information to such regulatory bodies; manufacturing standards; U.S. federal and state healthcare fraud and abuse, data privacy laws and other similar non-U.S. laws; or laws that require the true, complete and accurate reporting of financial information or data. Activities subject to these laws also involve the improper use or misrepresentation of information obtained in the course of clinical trials, the creation of fraudulent data in our nonclinical studies or clinical trials, or illegal misappropriation of product, which could result in regulatory sanctions and cause serious harm to our reputation. It is not always possible to identify and deter misconduct by employees and other third-parties, and the precautions we take to detect and prevent this activity may not be effective in controlling unknown or unmanaged risks or losses or in protecting us from governmental investigations or other actions or lawsuits stemming from a failure to be in compliance with such laws or regulations. In addition, we are subject to the risk that a person or government could allege such fraud or other misconduct, even if none occurred. If any such actions are instituted against us, and we are not successful in defending ourselves or asserting our rights, those actions could have a significant impact on our business and financial results, including, without limitation, the imposition of significant civil, criminal and administrative penalties, damages, monetary fines, disgorgements, individual imprisonment, other sanctions, contractual damages, reputational harm, diminished profits and future earnings and curtailment of our operations, any of which could adversely affect our ability to operate our business and our results of operations.

Risks Related to Intellectual Property

We may in the future become involved in lawsuits to defend ourselves against intellectual property disputes, which could be expensive and time consuming, and ultimately unsuccessful, and could result in the diversion of significant resources, and hinder our ability to commercialize our existing or future products.

Our success depends in part on not infringing the patents or violating the other proprietary rights of others. Intellectual property disputes can be costly to defend and may cause our business, operating results and financial condition to suffer. Significant litigation regarding patent rights occurs in the medical industry. Whether merited or not, it is possible that U.S. and foreign patents and pending patent applications controlled by third parties may be alleged to cover our products. We may also face allegations that our employees have misappropriated the intellectual property rights of their former employers or other third parties. Our competitors in both the U.S. and abroad, many of which have substantially greater resources and have made substantial investments in patent portfolios and competing technologies, may have applied for or obtained or may in the future apply for and obtain, patents that will prevent, limit, or otherwise interfere with our ability to make, use, sell, and/or export our products. Our competitors may have one or more patents for which they can threaten and/or initiate patent infringement actions against us and/or any of our third-party suppliers. Our ability to defend ourselves and/or our third-party suppliers may be limited by our financial and human resources, the availability of reasonable defenses, and the ultimate acceptance of our defenses by the courts or juries. Furthermore, if such patents are successfully asserted against us, this may result in an adverse impact on our business, including injunctions, damages, and/or attorneys’ fees. From time to time and in the ordinary course of business, we may develop noninfringement and/or invalidity positions with respect to third-party patents, which may or not be ultimately adjudicated as successful by a judge or jury if such patents were asserted against us.

We may receive in the future, particularly as a public company, communications from patent holders, including non-practicing entities, alleging infringement of patents or other intellectual property rights or misappropriation of trade secrets, or offering licenses to such intellectual property. Any claims that we assert against perceived infringers could also provoke these parties to assert counterclaims against us alleging that we infringe their intellectual property rights. At any given time, we may be involved as either a plaintiff or a defendant in a number of patent infringement actions, the outcomes of which may not be known for prolonged periods of time.

 

39


 

The large number of patents, the rapid rate of new patent applications and issuances, the complexities of the technologies involved and the uncertainty of litigation significantly increase the risks related to any patent litigation. Any potential intellectual property litigation also could force us to do one or more of the following:

 

stop selling, making, using, or exporting products that use the disputed intellectual property;

 

obtain a license from the intellectual property owner to continue selling, making, exporting, or using products, which license may require substantial royalty payments and may not be available on reasonable terms, or at all;

 

incur significant legal expenses;

 

pay substantial damages or royalties to the party whose intellectual property rights we may be found to be infringing, potentially including treble damages if the court finds that the infringement was willful;

 

if a license is available from a third-party, we may have to pay substantial royalties, upfront fees or grant cross-licenses to intellectual property rights for our products and services;

 

pay the attorney fees and costs of litigation to the party whose intellectual property rights we may be found to be infringing;

 

find non-infringing substitute products, which could be costly and create significant delay due to the need for FDA regulatory clearance;

 

find alternative supplies for infringing products or processes, which could be costly and create significant delay due to the need for FDA regulatory clearance; and/or

 

redesign those products or processes that infringe any third-party intellectual property, which could be costly, disruptive, and/or infeasible.

From time to time, we may be subject to legal proceedings and claims in the ordinary course of business with respect to intellectual property. Even if resolved in our favor, litigation or other legal proceedings relating to intellectual property claims may cause us to incur significant expenses, and could distract our technical and management personnel from their normal responsibilities. In addition, there could be public announcements of the results of hearings, motions or other interim proceedings or developments, and if securities analysts or investors perceive these results to be negative, it could have a material adverse effect on the price of our common stock. Finally, any uncertainties resulting from the initiation and continuation of any litigation could have a material adverse effect on our ability to raise the funds necessary to continue our operations.

If any of the foregoing occurs, we may have to withdraw existing products from the market or may be unable to commercialize one or more of our products, all of which could have a material adverse effect on our business, results of operations and financial condition. Any litigation or claim against us, even those without merit, may cause us to incur substantial costs, and could place a significant strain on our financial resources, divert the attention of management from our core business and harm our reputation. Furthermore, as the number of participants in the robotic hair restoration surgery market grows, the possibility of intellectual property infringement claims against us increases.

In addition, we may indemnify our customers, suppliers and international distributors against claims relating to the infringement of the intellectual property rights of third parties relating to our products, methods, and/or manufacturing processes. Third parties may assert infringement claims against our customers, suppliers, or distributors. These claims may require us to initiate or defend protracted and costly litigation on behalf of our customers, suppliers or distributors, regardless of the merits of these claims. If any of these claims succeed, we may be forced to pay damages on behalf of our customers, suppliers, or distributors or may be required to obtain licenses for the products they use. If we cannot obtain all necessary licenses on commercially reasonable terms, our customers may be forced to stop using our products, or our suppliers may be forced to stop providing us with products.

Similarly, interference or derivation proceedings provoked by third parties or brought by the United Stated Patent and Trademark Office, or USPTO, or any foreign patent authority may be necessary to determine the priority of inventions or other matters of inventorship with respect to our patents or patent applications. We may also become involved in other proceedings, such as re-examination or opposition proceedings, before the USPTO or its foreign counterparts relating to our intellectual property or the intellectual property rights of others. An unfavorable

 

40


 

outcome in any such proceedings could require us to cease using the related technology or to attempt to license rights to it from the prevailing party, or could cause us to lose valuable intellectual property rights. Our business could be harmed if the prevailing party does not offer us a license on commercially reasonable terms, if any license is offere d at all. Litigation or other proceedings may fail and, even if successful, may result in substantial costs and distract our management and other employees. We may also become involved in disputes with others regarding the ownership of intellectual property rights. For example, we jointly develop intellectual property with certain parties, and disagreements may therefore arise as to the ownership of the intellectual property developed pursuant to these relationships. If we are unable to resolve these disputes, we could lose valuable intellectual property rights.

Changes in patent law could diminish the value of patents in general, thereby impairing our ability to protect our existing and future products.

Recent patent reform legislation could increase the uncertainties and costs surrounding the prosecution of our patent applications and the enforcement or defense of our issued patents. On September 16, 2011, the Leahy-Smith America Invents Act, or the Leahy-Smith Act, was signed into law. The Leahy-Smith Act includes a number of significant changes to U.S. patent law. These include provisions that affect the way patent applications are prosecuted, redefine prior art, may affect patent litigation, and switched the U.S. patent system from a “first-to-invent” system to a “first-to-file” system. Under a “first-to-file” system, assuming the other requirements for patentability are met, the first inventor to file a patent application generally will be entitled to the patent on an invention regardless of whether another inventor had made the invention earlier. The USPTO recently developed new regulations and procedures to govern administration of the Leahy-Smith Act, and many of the substantive changes to patent law associated with the Leahy-Smith Act, in particular, the first-to-file provisions, only became effective on March 16, 2013. Accordingly, it is not clear what, if any, impact the Leahy-Smith Act will have on the operation of our business. The Leahy-Smith Act and its implementation could increase the uncertainties and costs surrounding the prosecution of our patent applications and the enforcement or defense of our issued patents, all of which could have a material adverse effect on our business and financial condition.

In addition, patent reform legislation may pass in the future that could lead to additional uncertainties and increased costs surrounding the prosecution, enforcement and defense of our patents and applications. Furthermore, the U.S. Supreme Court and the U.S. Court of Appeals for the Federal Circuit have made, and will likely continue to make, changes in how the patent laws of the U.S. are interpreted. For example, the U.S. Supreme Court has ruled on several patent cases in recent years, such as Association for Molecular Pathology v. Myriad Genetics, Inc. (Myriad I), Mayo Collaborative Services v. Prometheus Laboratories, Inc., and Alice Corporation Pty. Ltd. v. CLS Bank International, either narrowing the scope of patent protection available in certain circumstances or weakening the rights of patent owners in certain situations. Similarly, foreign courts have made, and will likely continue to make, changes in how the patent laws in their respective jurisdictions are interpreted. We cannot predict future changes in the interpretation of patent laws or changes to patent laws that might be enacted into law by U.S. and foreign legislative bodies. Those changes may materially affect our patents or patent applications and our ability to obtain additional patent protection in the future.

Obtaining and maintaining patent protection depends on compliance with various procedural, document submission, fee payment and other requirements imposed by governmental patent agencies, and our patent protection could be reduced or eliminated for non-compliance with these requirements.

The USPTO and various foreign governmental patent agencies require compliance with a number of procedural, documentary, fee payment, and other similar provisions during the patent application process. In addition, periodic maintenance fees on issued patents often must be paid to the USPTO and foreign patent agencies over the lifetime of the patent. While an unintentional lapse can in many cases be cured by payment of a late fee or by other means in accordance with the applicable rules, there are situations in which noncompliance can result in abandonment or lapse of the patent or patent application, resulting in partial or complete loss of patent rights in the relevant jurisdiction. Non-compliance events that could result in abandonment or lapse of a patent or patent application include, but are not limited to, failure to respond to official actions within prescribed time limits, non-payment of fees and failure to properly legalize and submit formal documents. If we fail to maintain the patents and patent applications covering our products or procedures, we may not be able to stop a competitor from marketing products that are the same as or similar to our own, which would have a material adverse effect on our business.

 

41


 

We may not be able to adequately protect our intellectual property rights throughout the world.

Filing, prosecuting and defending patents on our products in all countries throughout the world would be prohibitively expensive. The requirements for patentability may differ in certain countries, particularly developing countries, and the breadth of patent claims allowed can be inconsistent. In addition, the laws of some foreign countries may not protect our intellectual property rights to the same extent as laws in the U.S. Consequently, we may not be able to prevent third parties from practicing our inventions in all countries outside the U.S. Competitors may use our technologies in jurisdictions where we have not obtained patent protection to develop their own products and, furthermore, may export otherwise infringing products to territories in which we have patent protection that may not be sufficient to terminate infringing activities.

We do not have patent rights in certain foreign countries in which a market may exist. Moreover, in foreign jurisdictions where we do have patent rights, proceedings to enforce such rights could result in substantial costs and divert our efforts and attention from other aspects of our business, could put our patents at risk of being invalidated or interpreted narrowly, and our patent applications at risk of not issuing. Additionally, such proceedings could provoke third parties to assert claims against us. We may not prevail in any lawsuits that we initiate and the damages or other remedies awarded, if any, may not be commercially meaningful. Thus, we may not be able to stop a competitor from marketing and selling in foreign countries products that are the same as or similar to our products, and our competitive position in the international market would be harmed.

We depend on certain technologies that are licensed to us. We do not control these technologies and any loss of our rights to them could prevent us from selling our products.

We are dependent on licenses from HSC Development LLC and James A. Harris, M.D. for some of our key technologies. We do not own the patents that underlie these licenses. Our rights to use the technology we license are subject to the negotiation of, continuation of and compliance with the terms of those licenses. In some cases, we do not control the prosecution, maintenance, or filing of the patents to which we hold licenses, or the enforcement of these patents against third parties. These patents and patent applications were largely not written by us or our attorneys, and we largely did not have control over the drafting and prosecution. Our licensors might not have given the same attention to the drafting and prosecution of these patents and applications as we would have if we had been the owners of the patents and applications and had complete control over the drafting and prosecution. We cannot be certain that drafting and/or prosecution of the licensed patents and patent applications by the licensors have been or will be conducted in compliance with applicable laws and regulations or will result in valid and enforceable patents and other intellectual property rights.

Our intellectual property agreements with third parties may be subject to disagreements over contract interpretation, which could narrow the scope of our rights to the relevant intellectual property or technology or increase our financial or other obligations to our licensors.

Certain provisions in our intellectual property agreements may be susceptible to multiple interpretations. The resolution of any contract interpretation disagreement that may arise could affect the scope of our rights to the relevant intellectual property or technology, or affect financial or other obligations under the relevant agreement, either of which could have a material adverse effect on our business, financial condition, results of operations and prospects.

In addition, while it is our policy to require our employees and contractors who may be involved in the conception or development of intellectual property to execute agreements assigning such intellectual property to us, we may be unsuccessful in executing such an agreement with each party who in fact conceives or develops intellectual property that we regard as our own. Our assignment agreements may not be self-executing or may be breached, and we may be forced to bring claims against third parties, or defend claims they may bring against us, to determine the ownership of what we regard as our intellectual property.

We may be subject to damages resulting from claims that we or our employees have wrongfully used or disclosed alleged trade secrets of our competitors or are in breach of non-competition or non-solicitation agreements with our competitors.

We could in the future be subject to claims that we or our employees have inadvertently or otherwise used or disclosed alleged trade secrets or other proprietary information of former employers or competitors. Although we have procedures in place that seek to prevent our employees and consultants from using the intellectual property, proprietary information, know-how or trade secrets of others in their work for us, we may in the future be subject to

 

42


 

claims that we caused an employee to breach the terms of his or her non-competition or non-solicitation agreement, or that we or these individuals have, inadvertently or otherwise, used or disclosed the alleged trade secrets or other proprietary information of a former employer or competitor. Litiga tion may be necessary to defend against these claims. Even if we are successful in defending against these claims, litigation could result in substantial costs and could be a distraction to management. If our defense to those claims fails, in addition to paying monetary damages, a court could prohibit us from using technologies or functionalities that are essential to our products, if such technologies or functionalities are found to incorporate or be derived from the trade secrets or other proprietary inf ormation of the former employers. An inability to incorporate technologies or functionalities that are important or essential to our products would have a material adverse effect on our business, and may prevent us from selling our products or from practic ing our processes. In addition, we may lose valuable intellectual property rights or personnel. Moreover, any such litigation or the threat thereof may adversely affect our ability to hire employees or contract with independent sales representatives. A loss of key personnel or their work product could hamper or prevent our ability to commercialize our products, which could have an adverse effect on our business, results of operations and financial condition.

If our trademarks and trade names are not adequately protected, then we may not be able to build name recognition in our markets of interest and our business may be adversely affected.

We hold various trademarks for our products and services. Many of these trademarks are registered with the USPTO and corresponding government agencies in numerous other countries, and we hold trademark applications for these marks in a number of foreign countries, although the laws of many countries may not protect our trademark rights to the same extent as the laws of the U.S. Actions taken by us to establish and protect our trademarks might not prevent imitation of our products or services, infringement of our trademark rights by unauthorized parties or other challenges to our ownership or validity of our trademarks. If any of these events occur, we may not be able to protect and enforce our rights in these trademarks, which we need in order to build name recognition with potential partners or customers in our markets of interest. In addition, unauthorized third-parties may have registered trademarks similar and identical to our trademarks in foreign jurisdictions or may in the future file for registration of such trademarks. If they succeed in registering or developing common law rights in such trademarks, and if we were not successful in challenging such third-party rights, we may not be able to use such trademarks to market our products and services in those countries. If we are unable to register our trademarks, enforce our trademarks, or bar a third-party from registering or using a trademark, our ability to establish name recognition based on our trademarks and compete effectively in our markets of interest may be adversely affected.

If we are unable to protect the confidentiality of our trade secrets, our business and competitive position may be harmed.

In addition to patent and trademark protection, we also rely on trade secrets, including unpatented know-how, technology and other proprietary information, to maintain our competitive position. We seek to protect our trade secrets, in part, by entering into non-disclosure and confidentiality agreements with parties who have access to them, such as our consultants and vendors, or our former or current employees. We also enter into confidentiality and invention or patent assignment agreements with our employees and consultants. Despite these efforts, however, any of these parties may breach the agreements and disclose our trade secrets and other unpatented or unregistered proprietary information, and once disclosed, we are likely to lose trade secret protection. Monitoring unauthorized uses and disclosures of our intellectual property is difficult, and we do not know whether the steps we have taken to protect our intellectual property will be effective. In addition, we may not be able to obtain adequate remedies for any such breaches. Enforcing a claim that a party illegally disclosed or misappropriated a trade secret is difficult, expensive and time-consuming, and the outcome is unpredictable. In addition, some courts inside and outside the U.S. are less willing or unwilling to enforce trade secret protection.

Furthermore, our competitors may independently develop knowledge, methods and know-how similar, equivalent, or superior to our proprietary technology. Competitors could purchase our products and attempt to replicate some or all of the competitive advantages we derive from our development efforts, willfully infringe our intellectual property rights, design around our protected technology, or develop their own competitive technologies that fall outside of our intellectual property rights. In addition, our key employees, consultants, suppliers or other individuals with access to our proprietary technology and know-how may incorporate that technology and know-how into projects and inventions developed independently or with third parties. As a result, disputes may arise regarding the ownership of the proprietary rights to such technology or know-how, and any such dispute may not be resolved in our favor. If any of our trade secrets were to be lawfully obtained or independently developed by a competitor, we would have no right to

 

43


 

prevent them, or those to whom they communicate it, from using that technology or information to compete with us and our competitive position could be adversely affected. If our intellectual property is not adequately protected so as to protect our market against competitors’ products and methods, our competitive position could be adversely affected, as could our business.

Risks Related to Government Regulation

The ARTAS System and our operations are subject to extensive government regulation and oversight both in the U.S. and abroad, and our failure to comply with applicable requirements could harm our business.

The ARTAS System and related products and services are regulated as medical devices subject to extensive regulation in the U.S. and elsewhere, including by the FDA and its foreign counterparts. The FDA and foreign regulatory agencies regulate, among other things, with respect to medical devices:

 

design, development and manufacturing;

 

testing, labeling, content and language of instructions for use and storage;

 

clinical trials;

 

product safety;

 

marketing, sales and distribution;

 

premarket clearance and approval;

 

record keeping procedures;

 

advertising and promotion;

 

recalls and field safety corrective actions;

 

post-market surveillance, including reporting of deaths or serious injuries and malfunctions that, if they were to recur, could lead to death or serious injury;

 

post-market approval studies; and

 

product import and export.

The regulations to which we are subject are complex and have tended to become more stringent over time. Regulatory changes could result in restrictions on our ability to carry on or expand our operations, higher than anticipated costs or lower than anticipated sales.

In the U.S., before we can market a new medical device, or a new use of, new claim for or significant modification to an existing product, we must first receive either clearance under Section 510(k) of the FDCA or approval of a PMA application from the FDA, unless an exemption applies. In the 510(k) clearance process, before a device may be marketed, the FDA must determine that a proposed device is “substantially equivalent” to a legally-marketed “predicate” device, which includes a device that has been previously cleared through the 510(k) process, a device that was legally marketed prior to May 28, 1976 (preamendments device), a device that was originally on the U.S. market pursuant to an approved premarket approval, or PMA, application and later downclassified, or a 510(k)-exempt device. To be “substantially equivalent,” the proposed device must have the same intended use as the predicate device, and either have the same technological characteristics as the predicate device or have different technological characteristics and not raise different questions of safety or effectiveness than the predicate device. Clinical data are sometimes required to support substantial equivalence. In the PMA process, the FDA must determine that a proposed device is safe and effective for its intended use based, in part, on extensive data, including, but not limited to, technical, pre-clinical, clinical trial, manufacturing and labeling data. The PMA process is typically required for devices that are deemed to pose the greatest risk, such as life- sustaining, life-supporting or implantable devices.

Modifications to products that are approved through a PMA application generally require FDA approval. Similarly, certain modifications made to products cleared through a 510(k) may require a new 510(k) clearance. Both the PMA approval and the 510(k) clearance process can be expensive, lengthy and uncertain. The FDA’s 510(k) clearance process usually takes from three to 12 months, but can last longer. The process of obtaining a PMA is much more costly and uncertain than the 510(k) clearance process and generally takes from one to three years, or even longer,

 

44


 

from the time the application is filed with the FDA. In addition, a PMA generally requires, and the 510(k) clearance process sometimes requires, the performance of one or more clinical trials. Despite the time, effort and cost, we cannot assure you that any particular device will be approved or cleared by the FDA. Any delay or failure to obtain necessary regulatory approvals could harm our business.

In the U.S., we have obtained 510(k) premarket clearance from the FDA to market the ARTAS System for harvesting hair follicles from the scalp in men diagnosed with AGA who have black or brown straight hair. An element of our strategy is to continue to add new functionalities and enhance existing functionalities to the ARTAS System. We expect that certain modifications we may make to the ARTAS System may require new 510(k) clearance; however, future modifications may be subject to the substantially more costly, time-consuming and uncertain PMA process. If the FDA requires us to go through a lengthier, more rigorous examination for future products or modifications to existing products than we had expected, product introductions or modifications could be delayed or canceled, which could cause our sales to decline.

The FDA can delay, limit or deny clearance or approval of a device for many reasons, including:

 

we may not be able to demonstrate to the FDA’s satisfaction that the product or modification is substantially equivalent to the proposed predicate device or safe and effective for its intended use;

 

the data from our pre-clinical studies and clinical trials may be insufficient to support clearance or approval, where required; and

 

the manufacturing process or facilities we use may not meet applicable requirements.

The FDA’s and other regulatory authorities’ policies may change and additional government regulations may be enacted that could prevent, limit or delay regulatory approval of our products. For example, in December 2016, the 21st Century Cures Act, or Cures Act, was signed into law. The Cures Act, among other things, is intended to modernize the regulation of medical devices and spur innovation, but its ultimate implementation remains unclear. If we are slow or unable to adapt to changes in existing requirements or the adoption of new requirements or policies, or if we are not able to maintain regulatory compliance, we may fail to obtain any marketing clearances or approvals, lose any marketing clearance or approval that we may have obtained and we may not achieve or sustain profitability.

We also cannot predict the likelihood, nature or extent of government regulation that may arise from future legislation or administrative action, either in the U.S. or abroad. For example, certain policies of the Trump administration may impact our business and industry. Namely, the Trump administration has taken several executive actions, including the issuance of a number of Executive Orders, that could impose significant burdens on, or otherwise materially delay, the FDA’s ability to engage in routine regulatory and oversight activities such as implementing statutes through rulemaking, issuance of guidance, and review and approval of marketing applications. It is difficult to predict how these Executive Orders will be implemented, and the extent to which they will impact the FDA’s ability to exercise its regulatory authority. If these executive actions impose constraints on FDA’s ability to engage in oversight and implementation activities in the normal course, our business may be negatively impacted.

Even after we have obtained the proper regulatory clearance or approval to market a product, we have ongoing responsibilities under FDA regulations. The failure to comply with applicable regulations could jeopardize our ability to sell the ARTAS System and result in enforcement actions such as:

 

warning letters;

 

fines;

 

injunctions;

 

civil penalties;

 

termination of distribution;

 

recalls or seizures of products;

 

delays in the introduction of products into the market;

 

total or partial suspension of production;

 

refusal to grant future clearances or approvals;

 

45


 

 

withdrawals or suspensions of current clearances or approvals, resulting in prohibitions on sales of our product or products; and

 

in the most serious cases, criminal penalties.

Any of these sanctions could result in higher than anticipated costs or lower than anticipated sales and harm our reputation, business, financial condition and results of operations.

We are subject to extensive governmental regulation in foreign jurisdictions, such as Europe, and our failure to comply with applicable requirements could cause our business to suffer.

We must maintain regulatory approval in foreign jurisdictions in which we plan to market and sell the ARTAS System.

In the European Economic Area or EEA, manufacturers of medical devices need to comply with the Essential Requirements laid down in Annex II to the EU Medical Devices Directive (Council Directive 93/42/EEC).

Compliance with these requirements is a prerequisite to be able to affix the CE mark to medical devices, without which they cannot be marketed or sold in the EEA. To demonstrate compliance with the Essential Requirements and obtain the right to affix the CE Mark, manufacturers of medical devices must undergo a conformity assessment procedure, which varies according to the type of medical device and its classification. Except for low risk medical devices (Class I with no measuring function and which are not sterile), where the manufacturer can issue an EC Declaration of Conformity based on a self-assessment of the conformity of its products with the Essential Requirements, a conformity assessment procedure requires the intervention of a Notified Body, which is an organization designated by a competent authority of an EEA country to conduct conformity assessments.

Depending on the relevant conformity assessment procedure, the Notified Body would audit and examine the Technical File and the quality system for the manufacture, design and final inspection of our devices. The Notified Body issues a CE Certificate of Conformity following successful completion of a conformity assessment procedure conducted in relation to the medical device and its manufacturer and their conformity with the Essential Requirements. This Certificate entitles the manufacturer to affix the CE mark to its medical devices after having prepared and signed a related EC Declaration of Conformity.

As a general rule, demonstration of conformity of medical devices and their manufacturers with the Essential Requirements must be based, among other things, on the evaluation of clinical data supporting the safety and performance of the products during normal conditions of use. Specifically, a manufacturer must demonstrate that the device achieves its intended performance during normal conditions of use and that the known and foreseeable risks, and any adverse events, are minimized and acceptable when weighed against the benefits of its intended performance, and that any claims made about the performance and safety of the device (e.g., product labeling and instructions for use) are supported by suitable evidence. This assessment must be based on clinical data, which can be obtained from (1) clinical studies conducted on the devices being assessed, (2) scientific literature from similar devices whose equivalence with the assessed device can be demonstrated or (3) both clinical studies and scientific literature. With respect to active implantable medical devices or Class III devices, the manufacturer must conduct clinical studies to obtain the required clinical data, unless reliance on existing clinical data from equivalent devices can be justified. The conduct of clinical studies in the EEA is governed by detailed regulatory obligations. These may include the requirement of prior authorization by the competent authorities of the country in which the study takes place and the requirement to obtain a positive opinion from a competent Ethics Committee. This process can be expensive and time-consuming.

On April 5, 2017, the European Parliament passed the Medical Devices Regulation, which repeals and replaces the EU Medical Devices Directive. Unlike directives, which must be implemented into the national laws of the EEA member States, the regulations would be directly applicable, i.e., without the need for adoption of EEA member State laws implementing them, in all EEA member States and are intended to eliminate current differences in the regulation of medical devices among EEA member States. The Medical Devices Regulation, among other things, is intended to establish a uniform, transparent, predictable and sustainable regulatory framework across the EEA for medical devices and in vitro diagnostic devices and ensure a high level of safety and health while supporting innovation.

 

46


 

The Medical Devices Regulation will however only become applicable three years after publication. Once applicable, the new regulations will among other things:

 

strengthen the rules on placing devices on the market and reinforce surveillance once they are available;

 

establish explicit provisions on manufacturers’ responsibilities for the follow-up of the quality, performance and safety of devices placed on the market;

 

improve the traceability of medical devices throughout the supply chain to the end-user or patient through a unique identification number;

 

set up a central database to provide patients, healthcare professionals and the public with comprehensive information on products available in the EU; and

 

strengthen rules for the assessment of certain high-risk devices, such as implants, which may have to undergo an additional check by experts before they are placed on the market.

These modifications may have an impact on the way we conduct our business in the EEA.

Modifications to the ARTAS System and any future products that receive 510(k) clearance may require new 510(k) clearances or PMA approvals, and if we make such modifications without seeking new clearances or approvals, the FDA may require us to cease marketing or recall the modified products until clearances or approvals are obtained.

The ARTAS System has received 510(k) clearance from the FDA. Any modification to a 510(k)-cleared device that could significantly affect its safety or effectiveness, or that would constitute a major change in its intended use, design or manufacture, requires a new 510(k) clearance or, possibly, approval of a PMA. The FDA requires every manufacturer to make this determination the first instance, but the FDA may review any manufacturer’s decision. The FDA may not agree with our decisions regarding whether new clearances or approvals are necessary. The FDA has issued guidance intended to assist manufacturers in determining whether modifications to cleared devices require the submissions of a new 510(k). We have made modifications to the ARTAS System in the past and have determined based on our review of the applicable FDA regulations and guidance that in certain instances new 510(k) clearances or PMA approvals were not required. We may make similar modifications or add additional functionalities in the future that we believe do not require a new 510(k) clearance or approval of a PMA. If the FDA disagrees with our determination and requires us to submit new 510(k) notifications or PMA applications for modifications to our previously cleared products for which we have concluded that new clearances or approvals are unnecessary, we may be required to cease marketing or to recall the modified product until we obtain clearance or approval, which could require us to redesign our products, conduct clinical trials to support any modifications, and pay significant regulatory fines or penalties. In addition, the FDA may not approve or clear our products for the indications that are necessary or desirable for successful commercialization or could require clinical trials to support any modifications. Any delay or failure in obtaining required clearances or approvals would adversely affect our ability to introduce new or enhanced products in a timely manner, which in turn would harm our future growth. Any of these actions would harm our operating results.

We are subject to restrictions on the indications for which we are permitted to market our products, and any violation of those restrictions, or marketing of the ARTAS System for off-label uses, could subject us to regulatory enforcement action.

The FDA’s 510(k) clearance for the ARTAS System specifies the cleared indication for use of the product is dissecting hair follicles from the scalp in men diagnosed with AGA who have black or brown straight hair. The ARTAS System is intended to assist physicians in identifying and extracting hair follicular units from the scalp during hair transplantation.

We train our marketing and direct sales force to not promote the ARTAS System for uses outside of the FDA- cleared indications for use, known as “off-label uses.” We cannot, however, prevent a physician from using the ARTAS System off-label when, in the physician’s independent professional medical judgment, he or she deems it appropriate. There may be increased risk of injury to patients if physicians attempt to use the ARTAS System off-label. Furthermore, the use of the ARTAS System for indications other than those cleared by the FDA or approved by any foreign regulatory body may not effectively treat such conditions, which could harm our reputation in the marketplace among physicians and patients.

 

47


 

If the FDA or any foreign regulatory body determines that our promotional materials or training constitute promotion of an off-label use, it could request that we modify our training or promotion al materials or subject us to regulatory or enforcement actions, including, among other things, the issuance or imposition of an untitled letter, a warning letter, injunction, seizure, refusal to issue new 510(k)s or PMAs, withdrawal of existing 510(k)s or PMAs, refusal to grant export approvals, and civil fines or criminal penalties. It is also possible that other federal, state or foreign enforcement authorities might take action under other regulatory authority, such as false claims laws, if they conside r our business activities to constitute promotion of an off-label use, which could result in significant penalties, including, but not limited to, criminal, civil and administrative penalties, damages, fines, disgorgement, exclusion from participation in government healthcare programs and the curtailment of our operations.

The ARTAS System may cause or contribute to adverse medical events that we are required to report to the FDA, and if we fail to do so, we would be subject to sanctions that could harm our reputation, business, financial condition and results of operations. The discovery of serious safety issues with the ARTAS System, or a recall of the ARTAS System either voluntarily or at the direction of the FDA or another governmental authority, could have a negative impact on us.

We are subject to the FDA’s medical device reporting regulations and similar foreign regulations. The FDA’s medical device reporting regulations require us to report to the FDA when we receive or become aware of information that reasonably suggests that the ARTAS System may have caused or contributed to a death or serious injury or malfunctioned in a way that, if the malfunction were to recur, it could cause or contribute to a death or serious injury. The timing of our obligation to report is triggered by the date we become aware of the adverse event as well as the nature of the event. We may fail to report adverse events of which we become aware within the prescribed timeframe. We may also fail to recognize that we have become aware of a reportable adverse event, especially if it is not reported to us as an adverse event or if it is an adverse event that is unexpected or removed in time from the use of the ARTAS System. If we fail to comply with our reporting obligations, the FDA could take action, including warning letters, untitled letters, administrative actions, criminal prosecution, imposition of civil monetary penalties, revocation of our device clearance, seizure of our products or delay in clearance of future products.

The FDA and foreign regulatory bodies have the authority to require the recall of commercialized products in the event of material deficiencies or defects in design or manufacture of a product or in the event that a product poses an unacceptable risk to health. The FDA’s authority to require a recall must be based on a finding that there is reasonable probability that the device could cause serious injury or death. We may also choose to voluntarily recall a product if any material deficiency is found. A government-mandated or voluntary recall by us could occur as a result of an unacceptable risk to health, component failures, malfunctions, manufacturing defects, labeling or design deficiencies, packaging defects or other deficiencies or failures to comply with applicable regulations. We cannot assure you that product defects or other errors will not occur in the future. Recalls involving the ARTAS System could be particularly harmful to our business, financial condition and results of operations because it is our only product.

Companies are required to maintain certain records of recalls and corrections, even if they are not reportable to the FDA. We may initiate voluntary withdrawals or corrections for the ARTAS System in the future that we determine do not require notification of the FDA. If the FDA disagrees with our determinations, it could require us to report those actions as recalls and we may be subject to enforcement action. A future recall announcement could harm our reputation with customers, potentially lead to product liability claims against us and negatively affect our sales.

If we or our distributors do not obtain and maintain international regulatory registrations or approvals for the ARTAS System, our ability to market and sell the ARTAS System outside of the U.S. will be diminished.

Sale of the ARTAS System outside the U.S. are subject to foreign regulatory requirements that vary widely from country to country. In addition, the FDA regulates exports of medical devices from the U.S. While the regulations of some countries may not impose barriers to marketing and selling the ARTAS System or only require notification, others require that we or our distributors obtain the approval of a specified regulatory body. Complying with foreign regulatory requirements, including obtaining registrations or approvals, can be expensive and time-consuming, and we cannot be certain that we or our distributors will receive regulatory approvals in each country in which we plan to market the ARTAS System or that we will be able to do so on a timely basis. The time required to obtain registrations or approvals, if required by other countries, may be longer than that required for FDA clearance, and requirements for such registrations, clearances, or approvals may significantly differ from FDA requirements. If we

 

48


 

modify the ARTAS System, we or our distributors may need to apply for additional regulatory approvals or other authorizations before we are permitted to sell the modified product. In addition, we may not continue to meet the quality and safety standards required to maintain the authorizations that we or our distributors have received. If we or our distributors are unable to maintain our authorizations in a particular country, we will no longer be able to sell the applicable product in that country, which could harm our business.

Regulatory clearance or approval by the FDA does not ensure clearance or approval by regulatory authorities in other countries, and clearance or approval by one or more foreign regulatory authorities does not ensure clearance or approval by regulatory authorities in other foreign countries or by the FDA. However, a failure or delay in obtaining regulatory clearance or approval in one country may have a negative effect on the regulatory process in others.

We must manufacture our products in accordance with federal and state regulations, and we could be forced to recall our installed systems or terminate production if we fail to comply with these regulations.

The methods used in, and the facilities used for, the manufacture of the ARTAS System and related products must comply with the FDA’s Quality System Regulation, or QSR, which is a complex regulatory scheme that covers the procedures and documentation of the design, testing, production, process controls, quality assurance, labeling, packaging, handling, storage, distribution, installation, servicing and shipping of medical devices.

Furthermore, we are required to verify that our suppliers maintain facilities, procedures and operations that comply with our quality and applicable regulatory requirements. The FDA enforces the QSR through periodic announced or unannounced inspections of medical device manufacturing facilities, which may include the facilities of subcontractors. The ARTAS System is also subject to similar state regulations and various laws and regulations of foreign countries governing manufacturing.

We cannot guarantee that we or any subcontractors will take the necessary steps to comply with applicable regulations, which could cause delays in the delivery of the ARTAS System. In addition, failure to comply with applicable FDA requirements or later discovery of previously unknown problems with the ARTAS System or manufacturing processes could result in, among other things:

 

warning letters or untitled letters;

 

fines, injunctions or civil penalties;

 

suspension or withdrawal of approvals or clearances;

 

seizures or recalls of our products;

 

total or partial suspension of production or distribution;

 

administrative or judicially imposed sanctions;

 

the FDA’s refusal to grant pending or future clearances or approvals for our products;

 

clinical holds;

 

refusal to permit the import or export of our products; and

 

criminal prosecution to us or our employees.

Any of these actions could significantly and negatively impact supply of our products. If any of these events occurs, our reputation could be harmed, we could be exposed to product liability claims and we could lose customers and suffer reduced revenue and increased costs.

We may be subject to various federal and state laws pertaining to healthcare fraud and abuse, and any violations by us of such laws could result in fines or other penalties.

While procedures utilizing the ARTAS System are not currently covered or reimbursed by any third-party payor, our commercial, research and other financial relationships with healthcare providers and others may be subject to various federal and state laws intended to prevent healthcare fraud and abuse. Such laws include the U.S. federal Anti-Kickback Statute and similar laws that apply to state healthcare programs, private payors and self-pay patients; the U.S. federal civil and criminal false claims laws, such as the civil False Claims Act, and civil monetary penalties laws; state and federal data privacy and security laws and regulations; state and federal physician payment transparency laws; and state and federal consumer protection and unfair competition laws.

 

49


 

Further, these laws may impact any sales, marketing and education programs we currently have or may develop in the future and the manner in which we implement any of those programs. Penalties for violations of these laws can include exclusion from federal healthcare programs and substantial civil and criminal p enalties.

Recently enacted and future legislation may increase the difficulty and cost for us to sell our products.

In the U.S. and some non-U.S. jurisdictions, there have been, and we expect there will continue to be, a number of legislative and regulatory changes and proposed changes regarding the healthcare system that could, among other things, restrict or regulate post-approval activities and affect our ability to profitably sell our products. For example, in March 2010, the Patient Protection and Affordable Care Act, as amended by the Health Care and Education Reconciliation Act, collectively the Affordable Care Act, was enacted. The Affordable Care Act, imposed, among other things, an annual excise tax of 2.3% on any entity that manufactures or imports medical devices offered for sale in the U.S., which, due to subsequent legislative amendments, has been suspended from January 1, 2016 to December 31, 2019, and, absent further legislative action, will be reinstated starting January 1, 2020. It is uncertain the extent to which any challenges, amendments and attempts to repeal and replace the Affordable Care Act in the future may impact our business or financial condition. We expect that the Affordable Care Act, as well as other healthcare reform measures that may be adopted in the future, may potentially increase our costs to sell our product and decrease our profitability.

Recent U.S. tax legislation and future changes to applicable U.S. or foreign tax laws and regulations may have a material adverse effect on our business, financial condition and results of operations.

We are subject to income and other taxes in the U.S. and foreign jurisdictions. Changes in laws and policy relating to taxes or trade may have an adverse effect on our business, financial condition and results of operations. For example, the U.S. government recently enacted significant tax reform, and certain provisions of the new law may adversely affect us. Changes include, but are not limited to, a federal corporate tax rate decrease from 35% to 21% for tax years beginning after December 31, 2017, the transition of U.S. international taxation from a worldwide tax system to a more generally territorial system, and a one-time transition tax on the mandatory deemed repatriation of foreign earnings. The legislation is unclear in many respects and could be subject to potential amendments and technical corrections, and will be subject to interpretations and implementing regulations by the Treasury and Internal Revenue Service, any of which could mitigate or increase certain adverse effects of the legislation. In addition, it is unclear how these U.S. federal income tax changes will affect state and local taxation. Generally, future changes in applicable U.S. or foreign tax laws and regulations, or their interpretation and application could have an adverse effect on our business, financial conditions and results of operations.  

Risks Related to Our Common Stock

Our stock price has been and may continue to be volatile, and you may not be able to resell shares of our common stock at or above the price you paid.

The market price of our common stock could be highly volatile and could be subject to wide fluctuations in response to various factors, some of which are beyond our control. These factors include those discussed in this “Risk Factors” section and others such as:

 

the continued growth in demand for the ARTAS System and ARTAS procedures;

 

our commercialization, marketing and manufacturing prospects;

 

the continuing productivity and effectiveness of our commercial infrastructure and salesforce;

 

our financial performance;

 

our intentions and our ability to establish collaborations and/or partnerships;

 

the timing or likelihood of regulatory filings and approvals for the ARTAS System for expanded indications and functionality;

 

our commercialization, marketing and manufacturing capabilities;

 

our expectations regarding the potential market size and the size of the patient populations for the ARTAS System;

 

the effective pricing of the ARTAS System, services and procedures;

 

50


 

 

the implementation of our business model and strategic plans for our business and technology;

 

the scope of protection we are able to establish and maintain for intellectual property rights covering the ARTAS System, along with any product enhancements;

 

estimates of our expenses, future revenue, capital requirements, our needs for additional financing and our ability to obtain additional capital;

 

our financial performance; and

 

developments and projections relating to our competitors and our industry, including competing therapies and procedures.

In addition, the stock markets in general, and the markets for medical device and aesthetic stocks in particular, have experienced extreme volatility that may have been unrelated to the operating performance of the issuer. These broad market fluctuations may adversely affect the market price or liquidity of our common stock. In the past, when the market price of a stock has been volatile, holders of that stock have sometimes instituted securities class action litigation against the issuer. If any of our stockholders were to bring such a lawsuit against us, we could incur substantial costs defending the lawsuit and the attention of our management would be diverted from the operation of our business.

An active market for our common stock may not be maintained.

Prior to our initial public offering, there had been no public market for shares of our common stock . Our stock only recently began trading on The Nasdaq Global Market, but we can provide no assurance that we will be able to maintain an active trading market on The Nasdaq Global Market or any other exchange in the future. If an active market for our common stock does not develop or is not maintained, it may be difficult for our stockholders to sell shares without depressing the market price for the shares or at all. An inactive market may also impair our ability to raise capital by selling shares and may impair our ability to acquire other businesses, applications, or technologies using our shares as consideration.

If securities or industry analysts issue an adverse or misleading opinion regarding our stock, our stock price and trading volume could decline.

The trading market for our common stock is influenced by the research and reports that industry or securities analysts publish about us or our business. We currently have very limited research coverage by securities and industry analysts. If no additional securities or industry analysts commence coverage of us, the market price or trading volume of our stock could be negatively impacted. If any of the analysts who cover us issue an adverse or misleading opinion regarding us, our business model, our intellectual property or our stock performance, or if our operating results fail to meet the expectations of analysts, our stock price would likely decline. If one or more of these analysts cease coverage of us or fail to publish reports on us regularly, we could lose visibility in the financial markets, which in turn could cause our stock price or trading volume to decline.

We are an “emerging growth company” and as a result of the reduced disclosure and governance requirements applicable to emerging growth companies, our common stock may be less attractive to investors.

We are an “emerging growth company,” as defined in the JOBS Act, and we intend to take advantage of certain exemptions from various reporting requirements that are applicable to other public companies that are not emerging growth companies including, but not limited to, not being required to comply with the auditor attestation requirements of Section 404, reduced disclosure obligations regarding executive compensation in our periodic reports and proxy statements, and exemptions from the requirements of holding a nonbinding advisory vote on executive compensation, stockholder approval of any golden parachute payments not previously approved and delayed adoption of new or revised accounting standards issued subsequent to the enactment of the JOBS Act until such time as those standards apply to private companies. We cannot predict if investors will find our common stock less attractive because we will rely on these exemptions. If some investors find our common stock less attractive as a result, there may be a less active trading market for our common stock and our stock price may be more volatile. We may take advantage of these reporting exemptions until we are no longer an emerging growth company. We will remain an emerging growth company until the earlier of (1) the last day of the fiscal year (a) following the fifth anniversary of the completion of our initial public offering, (b) in which we have total annual gross revenue of at least $1.07 billion, or (c) in which we are deemed to be a large accelerated filer, which means the market value of

 

51


 

our common stock that is held by non-affiliates exceeds $700.0 million as of the prior June 30th, and (2) the date on which we have issued m ore than $1.0 billion in non-convertible debt during the prior three-year period.

If we sell shares of our common stock in future financings, stockholders may experience immediate dilution and, as a result, our stock price may decline.

We may from time to time issue additional shares of common stock at a discount from the current market price of our common stock. As a result, our stockholders would experience immediate dilution upon the purchase of any shares of our common stock sold at such discount. In addition, as opportunities present themselves, we may enter into financing or similar arrangements in the future, including the issuance of debt securities, preferred stock or common stock. If we issue common stock or securities convertible into common stock, our common stockholders would experience additional dilution and, as a result, our stock price may decline.

Our principal stockholders and management own a significant percentage of our stock and will be able to exert significant control over matters subject to stockholder approval.

Based on the number of shares outstanding as of December 31, 2017, as adjusted for the consummation of our initial public offering in October 2017, our executive officers, directors, holders of 5% or more of our capital stock and their respective affiliates beneficially owned approximately 36.9% of our voting stock. These stockholders will have the ability to influence us through this ownership position. These stockholders may be able to determine all matters requiring stockholder approval. For example, these stockholders may be able to control elections of directors, amendments of our organizational documents, or approval of any merger, sale of assets, or other major corporate transaction. This may prevent or discourage unsolicited acquisition proposals or offers for our common stock that you may feel are in your best interest as one of our stockholders.

Sales of a substantial number of shares of our common stock in the public market could cause our stock price to decline.

If our existing stockholders sell, or indicate an intention to sell, substantial amounts of our common stock in the public market after the lock-up and other legal restrictions lapse, the market price of our common stock could decline. Based upon the number of shares outstanding as of December 31, 2017, and after giving effect to the consummation of our initial public offering, we have outstanding a total of approximately 28.9 million shares. Of these shares, approximately 3.9 million shares of our common stock offered in the initial public offering are freely tradable, without restriction, in the public market.

The lock-up agreements pertaining to the initial public offering will expire April 9, 2018, after which an additional approximately 25.0 million shares of common stock will be eligible for sale in the public market, of which approximately 15.2 million of which shares are held by directors, executive officers and other affiliates and will be subject to Rule 144 under the Securities Act. The underwriters from our initial public offering may, however, in their sole discretion, permit our officers, directors and other stockholders who are subject to these lock-up agreements to sell or otherwise transfer shares prior to the expiration of the lock-up agreements, subject to certain requirements.

In addition, as of December 31, 2017, approximately 6,840,145 shares of our common stock that are either subject to outstanding options, reserved for future issuance under our equity incentive plans or subject to outstanding warrants are eligible for sale in the public market to the extent permitted by the provisions of various vesting schedules and Rule 144 and Rule 701 under the Securities Act. If these additional shares of common stock are sold, or if it is perceived that they will be sold, in the public market, the market price of our common stock could decline.

The holders of approximately 25.0 million shares of our common stock, or approximately 86.5 % of our total outstanding common stock as of December 31, 2017, after giving effect to the issuance of shares in our initial public offering, will be entitled to rights with respect to the registration of their shares under the Securities Act, subject to vesting schedules and to the lock-up agreements described above. Registration of these shares under the Securities Act would result in the shares becoming freely tradable without restriction under the Securities Act, except for shares purchased by affiliates. Any sales of securities by these stockholders could have a material adverse effect on the market price of our common stock

 

52


 

Our ability to use our net operating loss carryforwards and certain other tax attributes may be limited.

We have incurred substantial losses during our history and do not expect to become profitable in the near future, and we may never achieve profitability. To the extent that we continue to generate taxable losses, unused losses will carry forward to offset future taxable income, if any, until such unused losses expire. Under Sections 382 and 383 of the Internal Revenue Code of 1986, as amended, if a corporation undergoes an “ownership change,” generally defined as a greater than 50 percentage point change (by value) in its equity ownership by certain stockholders over a three-year period, the corporation’s ability to use its pre-change net operating loss carryforwards, or NOLs, and other pre-change tax attributes (such as research and development tax credits) to offset its post-change income or taxes may be limited. We may have experienced ownership changes in the past and may experience ownership changes in the future and/or subsequent shifts in our stock ownership (some of which shifts are outside our control). As a result, if we earn net taxable income, our ability to use our pre-change NOLs to offset such taxable income could be subject to limitations. Similar provisions of state tax law may also apply. As a result, even if we attain profitability, we may be unable to use a material portion of our NOLs and other tax attributes.

Provisions in our charter documents and under Delaware law could discourage a takeover that stockholders may consider favorable and may lead to entrenchment of management.

Our amended and restated certificate of incorporation and amended and restated bylaws contain provisions that could delay or prevent changes in control or changes in our management without the consent of our board of directors. These provisions will include the following:

 

a classified board of directors with three-year staggered terms, which may delay the ability of stockholders to change the membership of a majority of our board of directors;

 

no cumulative voting in the election of directors, which limits the ability of minority stockholders to elect director candidates;

 

the exclusive right of our board of directors to elect a director to fill a vacancy created by the expansion of the board of directors or the resignation, death or removal of a director, which prevents stockholders from being able to fill vacancies on our board of directors;

 

the ability of our board of directors to authorize the issuance of shares of preferred stock and to determine the price and other terms of those shares, including preferences and voting rights, without stockholder approval, which could be used to significantly dilute the ownership of a hostile acquirer;

 

the ability of our board of directors to alter our bylaws without obtaining stockholder approval;

 

the required approval of at least 66 2/3% of the shares entitled to vote at an election of directors to adopt, amend or repeal our bylaws or repeal the provisions of our amended and restated certificate of incorporation regarding the election and removal of directors;

 

a prohibition on stockholder action by written consent, which forces stockholder action to be taken at an annual or special meeting of our stockholders;

 

the requirement that a special meeting of stockholders may be called only by the chairman of the board of directors, the chief executive officer, the president or the board of directors, which may delay the ability of our stockholders to force consideration of a proposal or to take action, including the removal of directors; and

 

advance notice procedures that stockholders must comply with in order to nominate candidates to our board of directors or to propose matters to be acted upon at a stockholders’ meeting, which may discourage or deter a potential acquirer from conducting a solicitation of proxies to elect the acquirer’s own slate of directors or otherwise attempting to obtain control of us.

In addition, these provisions would apply even if we were to receive an offer that some stockholders may consider beneficial.

We are also subject to the anti-takeover provisions contained in Section 203 of the Delaware General Corporation Law. Under Section 203, a corporation may not, in general, engage in a business combination with any holder of 15% or more of its capital stock unless the holder has held the stock for three years or, among other exceptions, the board of directors has approved the transaction.

 

53


 

Claims for indemnification by our directors and officers may reduce our available funds to satisfy successful third-party claims against us and may reduce the amount of money available to us.

Our amended and restated certificate of incorporation and amended and restated bylaws provide that we will indemnify our directors and officers, in each case to the fullest extent permitted by Delaware law.

In addition, as permitted by Section 145 of the Delaware General Corporation Law, our amended and restated bylaws and our indemnification agreements that we have entered into with our directors and officers provide that:

 

we will indemnify our directors and officers for serving us in those capacities or for serving other business enterprises at our request, to the fullest extent permitted by Delaware law. Delaware law provides that a corporation may indemnify such person if such person acted in good faith and in a manner such person reasonably believed to be in or not opposed to the best interests of the registrant and, with respect to any criminal proceeding, had no reasonable cause to believe such person’s conduct was unlawful;

 

we may, in our discretion, indemnify employees and agents in those circumstances where indemnification is permitted by applicable law;

 

we are required to advance expenses, as incurred, to our directors and officers in connection with defending a proceeding, except that such directors or officers shall undertake to repay such advances if it is ultimately determined that such person is not entitled to indemnification;

 

we will not be obligated pursuant to our amended and restated bylaws to indemnify a person with respect to proceedings initiated by that person against us or our other indemnitees, except with respect to proceedings authorized by our board of directors or brought to enforce a right to indemnification;

 

the rights conferred in our amended and restated bylaws are not exclusive, and we are authorized to enter into indemnification agreements with our directors, officers, employees and agents and to obtain insurance to indemnify such persons; and

 

we may not retroactively amend our amended and restated bylaw provisions to reduce our indemnification obligations to directors, officers, employees and agents.

Our certificate of incorporation provides that the Court of Chancery of the State of Delaware will be the exclusive forum for substantially all disputes between us and our stockholders, which could limit our stockholders’ ability to obtain a favorable judicial forum for disputes with us or our directors, officers or employees.

Our amended and restated certificate of incorporation provides that the Court of Chancery of the State of Delaware is the exclusive forum for any derivative action or proceeding brought on our behalf, any action asserting a breach of fiduciary duty, any action asserting a claim against us arising pursuant to the Delaware General Corporation Law, our certificate of incorporation or our bylaws, any action to interpret, apply, enforce, or determine the validity of our certificate of incorporation or bylaws, or any action asserting a claim against us that is governed by the internal affairs doctrine. The choice of forum provision may limit a stockholder’s ability to bring a claim in a judicial forum that it finds favorable for disputes with us or our directors, officers or other employees, which may discourage such lawsuits against us and our directors, officers and other employees. Alternatively, if a court were to find the choice of forum provision contained in our certificate of incorporation to be inapplicable or unenforceable in an action, we may incur additional costs associated with resolving such action in other jurisdictions, which could adversely affect our business and financial condition.

We do not intend to pay dividends on our common stock, and, consequently, our stockholders’ ability to achieve a return on their investment will depend on appreciation in the price of our common stock.

We do not intend to pay any cash dividends on our common stock for the foreseeable future. We intend to invest our future earnings, if any, to fund our growth. Furthermore, pursuant to the loan and the security agreement between us and Oxford, we are not permitted to pay cash dividends in excess of $250,000 in aggregate per fiscal year without its prior written consent. Therefore, our stockholders are not likely to receive any dividends on their common stock for the foreseeable future. Since we do not intend to pay dividends, our stockholders’ ability to receive a return on their investment will depend on any future appreciation in the market value of our common stock. There is no guarantee that our common stock will appreciate or even maintain the price at which our stockholders have purchased it.

 

54


 

Item 1B.

Unresolve d Staff Comments.

None.

Item 2.

Property

Our corporate headquarters is located in San Jose, California, where we occupy approximately 23,000 square feet of office space under a lease that expires in April 2022. We believe that our facilities are sufficient to meet our current needs.

Item 3.

Legal Proceedings.

From time to time, we may become involved in legal proceedings relating to claims arising out of our operations. We are not currently a party to any legal proceedings that, in the opinion of our management, are likely to have a material adverse effect on our business. Regardless of outcome, litigation can have an adverse impact on us because of defense and settlement costs, diversion of management resources and other factors.

Item 4.

Mine Safety Disclosures.

Not applicable.

 

55


 

PAR T II

Item 5.

Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities.

Price Range of Common Stock

Our common stock has been listed on The Nasdaq Global Market under the symbol “HAIR” since October 12, 2017. Prior to that date, there was no public trading market for our common stock. The following table sets forth for the period indicated the high and low sale prices per share of our common stock as reported on The Nasdaq Global Market:

 

 

 

High

 

 

Low

 

Fiscal Year 2017

 

 

 

 

 

 

 

 

Fourth Quarter (from October 12, 2017)

 

$

11.95

 

 

$

3.96

 

 

On February 26, 2018, the last reported sale price of our common stock on The Nasdaq Global Market was $5.85 per share. As of February 26, 2018, there were 661 holders of record of our common stock. The actual number of stockholders is greater than this number of record holders and includes stockholders who are beneficial owners but whose shares are held in street name by brokers and other nominees.

Stock Price Performance Graph

The graph below shows a comparison from October 12, 2017, the date on which our common stock first began trading on The Nasdaq Global Market, of the cumulative total return on an assumed investment of $100.00 in cash in our common stock as compared to the same investment in the Nasdaq Composite Index and the Nasdaq Biotechnology Index, all through to December 31, 2017. Such returns are based on historical results and are not intended to suggest future performance. This graph shall not be deemed “soliciting material” or be deemed “filed” for purposes of Section 18 of the Exchange Act, or otherwise subject to the liabilities under that Section, and shall not be deemed to be incorporated by reference into any of our filings under the Securities Act, whether made before or after the date hereof and irrespective of any general incorporation language in any such filing .

 

 

56


 

Dividend Policy

We have never declared or paid cash dividends on our common stock. We currently intend to retain all available funds and any future earnings to fund, if any, for use in the operation of our business and do not anticipate paying any dividends on our common stock in the foreseeable future. Any future determination related to dividend policy will be made at the discretion of our board of directors and will depend on our financial condition, operating results, capital requirements, general business conditions and other factors that our board of directors may deem relevant.

Recent Sale of Unregistered Securities

From January 1, 2017 through December 31, 2017, we sold and issued the following unregistered securities, which share numbers have been adjusted, as appropriate, for the 1-for-10 reverse stock split which became effective on September 15, 2017:

 

(1)

Prior to filing our registration statement on Form S-8 in 2017, we granted options to our directors, officers, employees and consultants to purchase 133,870 shares of common stock under our 2015 Stock Plan with per share exercise prices ranging from $1.70 to $1.90, and have issued 9,781 shares of common stock upon exercise of such options.

 

(2)

We issued $5.0 million in subordinated convertible notes to the Company’s existing stockholders and their affiliated entities, including investors affiliated with certain of the Company’s directors. Immediately prior to the closing of the IPO, the principal and accrued interest on the outstanding convertible notes converted into 718,184 shares of common stock.

 

(3)

We issued an aggregate of 1,529,306 shares of our Series C preferred stock at a price per share of $7.15 for aggregate net proceeds to us of $10.2 million.

The offers, sales and issuances of the securities described in paragraphs (1) above were deemed to be exempt from registration under the Securities Act under Rule 701 promulgated under the Securities Act as offers and sale of securities pursuant to certain compensatory benefit plans and contracts relating to compensation in compliance with Rule 701.

The offers, sales, and issuances of the securities described in paragraphs (2) and (3) above were deemed to be exempt from registration under the Securities Act in reliance on Section 4(a)(2) of the Securities. The recipients of securities in each of these transactions acquired the securities for investment only and not with a view to or for sale in connection with any distribution thereof and appropriate legends were affixed to the securities issued in these transactions. Each of the recipients of securities in these transactions was an accredited or sophisticated person and had adequate access, through employment, business or other relationships, to information about us.

Use of Proceeds from Registered Securities

On October 11, 2017, the Company’s Registration Statement on Form S-1 (File No. 333-220303) relating to the initial public offering (IPO) of its common stock was declared effective by the Securities and Exchange Commission (SEC). Pursuant to such Registration Statement, the Company completed its initial public offering (collectively, the IPO) of 3,897,910 shares of its common stock (inclusive of 322,910 shares of common stock from the subsequent exercise of the over-allotment option granted to the underwriters) at a price of $7.00 per share for aggregate cash proceeds of approximately $22.1 million after deducting offering costs and commissions of $5.2 million. There has been no material change in the expected use of the net proceeds from our IPO, as described in our final prospectus dated October 11, 2017 and filed with the SEC on October 13, 2017 pursuant to Rule 424(b) under the Securities Act of 1933, as amended.

Issuer Purchases of Equity Securities

None.

Securities Authorized for Issuance under Equity Compensation Plans

The information called for by this item is incorporated by reference to our Proxy Statement for the 2018 Annual Meeting of Stockholders. See Part III, Item 12 “Security Ownership of Certain Beneficial Owners and Management.”

 

57


 

Item 6.

Selecte d Consoli dated Financial Data.

We have derived the following selected consolidated statement of operations data for the years ended December 31, 2017, 2016 and 2015 and the selected consolidated balance sheet data as of December 31, 2017 and 2016 from our audited consolidated financial statements included elsewhere in this report. The selected consolidated balance sheet data as of December 31, 2015 is derived from our audited consolidated financial statements which are not included in this report.

Our historical results are not necessarily indicative of the results to be expected in the future. You should read the selected consolidated financial data below in conjunction with Part II, Item 7. “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and our consolidated financial statements and the related notes included in this Annual Report on Form 10-K.

 

 

 

Year Ended, December 31,

 

 

 

2017

 

 

2016

 

 

2015

 

 

 

(in thousands except share and per share

data)

 

Consolidated Statements of Operations Data:

 

 

 

 

 

 

 

 

 

 

 

 

Revenue, net

 

$

21,297

 

 

$

15,600

 

 

$

17,230

 

Cost of revenue

 

 

12,150

 

 

 

10,431

 

 

 

12,513

 

Gross profit

 

 

9,147

 

 

 

5,169

 

 

 

4,717

 

Operating expenses (1) :

 

 

 

 

 

 

 

 

 

 

 

 

Research and development

 

 

7,135

 

 

 

7,474

 

 

 

7,399

 

Sales and marketing

 

 

14,390

 

 

 

12,483

 

 

 

14,587

 

General and administrative

 

 

4,904

 

 

 

4,144

 

 

 

3,256

 

Total operating expenses

 

 

26,429

 

 

 

24,101

 

 

 

25,242

 

Loss from operations

 

 

(17,282

)

 

 

(18,932

)

 

 

(20,525

)

Other income (expense), net:

 

 

 

 

 

 

 

 

 

 

 

 

Interest expense

 

 

(2,027

)

 

 

(2,483

)

 

 

(2,892

)

Gain on sale of investment

 

 

1,851

 

 

 

 

 

 

 

Other income (expense)

 

 

(328

)

 

 

(431

)

 

 

446

 

Total other income (expense), net

 

 

(504

)

 

 

(2,914

)

 

 

(2,446

)

Net loss before provision for income taxes

 

 

(17,786

)

 

 

(21,846

)

 

 

(22,971

)

Provision for income taxes

 

 

56

 

 

 

 

 

 

 

Net loss

 

$

(17,842

)

 

$

(21,846

)

 

$

(22,971

)

Net loss per share, basic and diluted (2)

 

$

(2.42

)

 

$

(13.54

)

 

$

(14.70

)

Weighted-average shares used in computing net loss

   per share, basic and diluted

 

 

7,382,715

 

 

 

1,612,933

 

 

 

1,562,829

 

 

 

(1)

Includes the following stock-based compensation:

 

 

 

Years Ended, December 31,

 

 

 

2017

 

 

2016

 

 

2015

 

 

 

(in thousands)

 

Cost of revenue

 

$

10

 

 

$

12

 

 

$

12

 

Research and development

 

 

101

 

 

 

102

 

 

 

116

 

Sales and marketing

 

 

74

 

 

 

85

 

 

 

140

 

General and administrative

 

 

280

 

 

 

267

 

 

 

161

 

Total stock-based compensation

 

$

465

 

 

$

466

 

 

$

429

 

 

 

(2)

Basic and diluted net loss per share is computed based on the weighted-average number of shares of common stock outstanding during each period. On September 15, 2017, the Company effected  a 1-for-10 reverse stock split (i) every 10 shares of outstanding common stock were combined into one share of common stock, (ii) the number of shares of common stock for which each outstanding option to purchase common stock is exercisable was proportionately decreased on a 1-for-10 basis, (iii) the exercise price of each outstanding option to purchase common stock was proportionally increased on a l-

 

58


 

 

for-10 basis, and (iv) the conversion ratio for each share of outstanding preferred stock which is convertible into our common stock was proporti onately reduced on a 1-for-10 basis. All share and per share data in this table has been adjusted to reflect the reverse stock split. For additional information, see Notes 1 and 3 to our consolidated financial statements included elsewhere in this Annual R eport on Form 10-K.

 

 

 

December 31,

 

 

 

2017

 

 

2016

 

 

2015

 

 

 

(in thousands)

 

Consolidated Balance Sheets Data:

 

 

 

 

 

 

 

 

 

 

 

 

Cash and cash equivalents

 

$

23,545

 

 

$

11,906

 

 

$

17,127

 

Working capital

 

 

17,686

 

 

 

4,889

 

 

 

20,429

 

Total assets

 

 

32,970

 

 

 

19,498

 

 

 

26,477

 

Debt, net of discount

 

 

13,001

 

 

 

20,450

 

 

 

19,713

 

Preferred stock warrant liabilities

 

 

 

 

 

693

 

 

 

347

 

Other long-term liabilities

 

 

459

 

 

 

563

 

 

 

 

Convertible preferred stock

 

 

 

 

 

135,735

 

 

 

123,662

 

Accumulated deficit

 

 

(164,487

)

 

 

(146,645

)

 

 

(124,799

)

Total stockholders’ equity (deficit)

 

 

13,194

 

 

 

(143,544

)

 

 

(122,205

)

 

Item 7.

Management’s Discussion and Analysis of Financial Condition and Results of Operations.

The following discussion contains management’s discussion and analysis of our financial condition and results of operations and should be read together with the historical consolidated financial statements and the notes thereto included in Part II, Item 8 “Consolidated Financial Statements and Supplementary Data.” This discussion contains forward-looking statements that reflect our plans, estimates and beliefs and involve numerous risks and uncertainties, including but not limited to those described in the “Risk Factors” section of this Annual Report on Form 10-K. Actual results may differ materially from those contained in any forward-looking statements. You should carefully read “Special Note Regarding Forward-Looking Statements” and Part I, Item 1A, “Risk Factors.”

Overview

We are a medical technology company developing and commercializing a robotic device, the ARTAS System, which assists physicians in performing many of the repetitive tasks that are a part of a follicular unit extraction, or FUE surgery, a type of hair restoration procedure. We believe the ARTAS System is the first and only physician assisted robotic system that can identify and dissect hair follicular units directly from the scalp and create recipient implant sites. In addition to the ARTAS System, we also offer the ARTAS Hair Studio application, an interactive three-dimensional patient consultation tool that enables a physician to create a simulated hair transplant model for use in patient consultations. We received clearance from the U.S. Food and Drug Administration, or FDA, in April 2011 to market the ARTAS System in the U.S., and we have sold the ARTAS System into 30 other countries. As of December 31, 2017, we have sold 94 ARTAS Systems in the U.S. and 159 internationally. As of December 31, 2017, the ARTAS System and ARTAS Hair Studio application are protected by over 81 patents in the U.S. and over 110 international patents.

On October 11, 2017, our Registration Statement on Form S-1 (File No. 333-220303) relating to our initial public offering (IPO) of its common stock was declared effective by the Securities and Exchange Commission (SEC). Pursuant to such Registration Statement, we sold an aggregate of 3,897,910 shares of its common stock (inclusive of 322,910 shares of common stock from the subsequent exercise of the over-allotment option granted to the underwriters) at a price of $7.00 per share for aggregate cash proceeds of approximately $22.1 million after deducting offering costs and commissions of $5.2 million.

We have funded our operations to date primarily from the issuance and sale of our common stock in our IPO, private placements of our equity securities and, to a lesser extent, through debt financings, exercises of our common stock warrants and payments from our customers. As of December 31, 2017, we had cash and cash equivalents of $23.5 million.

 

59


 

Need for Additional Capital

Our independent registered public accounting firm included an explanatory paragraph in its report on our consolidated financial statements as of and for the year ended December 31, 2017, raising substantial doubt about our ability to continue as a going concern. See “Liquidity and Capital Resources” and Note 1 to the consolidated financial statements for additional information describing the circumstances that led to the inclusion of this explanatory paragraph.

To date, we have incurred significant net losses and negative cash flows from operations. Our net loss was $17.8 million, $21.8 million, and $23.0 million for the years ended December 31, 2017, 2016 and 2015. As of December 31, 2017, we had an accumulated deficit of $164.5 million. Our principal sources of liquidity as of December 31, 2017 were cash and cash equivalents of $23.5 million.

Factors Affecting our Results of Operations

We believe there are several important factors that have impacted, and that we expect will impact, our results of operations.

Adoption of the ARTAS System

The growth of our business depends on our ability to gain broader acceptance of the ARTAS System and the ARTAS procedure by successfully marketing and distributing the ARTAS System and the ARTAS procedure. If we are unable to successfully commercialize our ARTAS System and the ARTAS procedure, we may not be able to generate sufficient revenue to achieve or sustain profitability. In the near term, we expect we will continue to operate at a loss and we anticipate we will finance our operations principally through offerings of our capital stock and by incurring debt. If we are unable to raise adequate additional capital, we will be unable to maintain our commercialization efforts and our revenue could decline.

Significant Investment in our Sales and Marketing

As a result of declining ARTAS System unit sales in the U.S. and other regions in the second half of 2015 and early 2016, we introduced a new leadership team, made certain strategic changes to and investments in our U.S. sales and global marketing organizations, which included terminating certain personnel and hiring new personnel and realigning our reporting and leadership structure in the sales organization. For example, we increased the size of our U.S. sales force by hiring sales professionals with extensive experience selling to physicians in the aesthetic market. Beginning with the fourth quarter of 2016, ARTAS System sales increased in the U.S. We also strategically revised our branding and consolidated our regional marketing teams to standardize our messaging and focus of our marketing spending with an aim to be more efficient and cost-effective. As a result, we have seen a reduction in and improved efficiency of our marketing spending.

While we have increased revenue in 2017 as a result of increased unit sales, these sales initiatives have also increased our sales and marketing expenses. Furthermore, we anticipate as we continue to advance the commercialization of the ARTAS System, our sales and marketing expenses will continue to increase in the near term.

Revenue Composition and Trends

We derive our revenue from the sale and service of ARTAS Systems and procedure based fees, as follows:

 

 

 

Year Ended December 31,

 

 

 

2017

 

 

2016

 

 

2015

 

 

 

(in thousands)

 

Systems

 

$

11,405

 

 

$

7,193

 

 

$

10,594

 

Procedure based

 

 

7,971

 

 

 

6,927

 

 

 

5,766

 

Service related fees

 

 

1,921

 

 

 

1,480

 

 

 

870

 

Total revenue

 

$

21,297

 

 

$

15,600

 

 

$

17,230

 

 

 

Systems revenue increased from 2016 to 2017 as a result of increased unit sales largely due to an increase in sales and marketing activities. Systems revenue decreased from 2015 to 2016 due to the implementation of certain strategic changes in our U.S. sales force in 2016 that included terminating

 

60


 

 

certain personnel and realigning our reporting and leadership structure in the sales organization, each of which disrupted some sales activities during this period.

 

Revenue from procedure based fees increased from 2015 to 2016 and increased again from 2016 to 2017.  While the procedure based fees increased during these periods, the total number of procedures performed during these periods did not increase proportionally with the increase in the installed base of ARTAS Systems and we have experienced only a slight increase in the total number of procedures performed period-over-period.

 

Service-related fees increased from 2015 to 2016 and increased again from 2016 to 2017 primarily due to an increase in each period in the number of post-warranty maintenance contracts sold as a result of the larger installed base.

Historically, the majority of our revenue and our revenue growth has been generated through system sales. While we would expect our procedure based fees to continue to increase as our installed base of ARTAS Systems grows worldwide, the total number of procedures has not increased proportionally with the increase in our installed base and the number of procedures performed tends to vary from quarter-to-quarter. We sold 47 ARTAS Systems and 32 ARTAS Systems in 2017 and 2016, representing an aggregate installed base growth of approximately 45% from December 31, 2015, or 174 to 253 systems, yet our procedure based fees have increased by approximately 38%, or $2.2 million, from 2015 to 2017. We believe that revenue from procedure based fees has not grown proportionally with the increase in our installed base and varies from quarter-to-quarter due to a number factors, including:

 

physician uptake causing a slow ramp-up to utilizing the ARTAS System, which is particularly evident with physicians who are new to hair restoration procedures or physicians who do not operate a solely hair restoration focused practice who are commonly the profile we are targeting;

 

capacity limitations with the current installed base of ARTAS Systems, which can result in procedure based fees not growing as quickly as system sales, as high performing practitioners are limited in the number of procedures that can be performed in any given period;

 

limited or no utilization of the ARTAS System after purchase as a result of a change in physician preference or practice; and

 

the concentration of ARTAS procedures being performed on a limited number of ARTAS Systems leading to volatility between periods if particular high volume practitioners perform a smaller number of procedures in a given period which often happens during the summer period.

In order to increase the number of procedures performed per ARTAS System unit, and in turn increase revenue from procedure based fees, we have, in connection with the leadership and sales and marketing changes implemented in the second half of 2016, initiated programs to assist certain physicians in marketing efforts, patient education and practice optimization to increase utilization of the ARTAS System. If these efforts are successful, we anticipate that the growth in procedure based fees will increase and that quarterly fluctuations in the number of total procedures performed will be reduced.

Growth in Revenue from Markets Outside the U.S.

Since launching the ARTAS System in 2011, we have obtained clearance to sell our products in a total of 61 countries. In June 2012, we obtained our CE mark to sell our product into the European Economic Area, or EEA. We have sold into 37 countries and sell directly into the U.S., Korea, Hong Kong, Singapore, Spain, Poland, Benelux and Scandinavia, and through distributors in the other countries. Most recently, we obtained clearance to sell in China in September 2016.

 

61


 

A significant portion of our revenue come from markets outside of the U.S. We believe that this trend will continue as a result of increa sed penetration in the countries where we sell the ARTAS System, as well as expansion into new international markets. The percentages of our revenue by region are as follows:

 

 

 

Year Ended December 31,

 

 

 

2017

 

 

2016

 

 

2015

 

United States

 

 

42

%

 

 

43

%

 

 

48

%

Europe and Middle East

 

 

27

%

 

 

20

%

 

 

17

%

Asia Pacific

 

 

20

%

 

 

23

%

 

 

17

%

Rest of World

 

 

11

%

 

 

14

%

 

 

18

%

Total revenue

 

 

100

%

 

 

100

%

 

 

100

%

 

The ARTAS System unit sales declined from 2015 to 2016 as a result of decreased unit sales in the U.S. and the Rest of World region, partially offset by increased units in the Europe and Middle East and Asia Pacific region as well as increased procedure-based fees throughout the Rest of World region. The ARTAS System unit sales increased in 2017 compared to 2016 in the U.S., Europe and Middle East and Asia Pacific regions, partially offset by decreased unit sales in the Rest of the World region.

We expect our operating expenses to increase as a result of increased sales and marketing activity to promote penetration in markets outside the U.S. where we already sell the ARTAS System and geographic expansion into new markets.

Factors Affecting Comparability

We anticipate that our quarterly results of operations may fluctuate for the foreseeable future due to several factors, including the performance of our direct sales force and international distributors and unanticipated interruptions and expenses related to our operations. In addition, due to the long lead time to finalize ARTAS System unit sales with our physician customers, and the significant impact each unit sale has on a period’s revenue due to the price of each unit, our quarterly revenue may not be comparable from one period to another.

Furthermore, our industry is characterized by seasonally lower demand during the third calendar quarter of the year, when both physicians and prospective patients take summer vacations. A detailed discussion of these and other factors that impact our business is provided in the “Risk Factors” section in this Annual Report on Form 10-K.

Components of Results of Operations

Revenue, Net

We generate revenue from the sale and service of ARTAS Systems and procedure based fees. For procedure based fees, our physician customers in the U.S. generally pay in advance on a per follicle-basis for the follicles to be harvested, and on a per procedure basis for Site Making. Outside of the U.S., physician customers pay in advance, generally on a per procedure basis for both follicle extraction and Site Making. Our revenue has historically been net of discounts. In the year ended December 31, 2017 there were de minimis discounts.

Cost of Revenue

Cost of revenue primarily consists of product, fulfillment, and customer service costs. Product costs include the cost of systems, upgrades, disposable and reusable kits, and personnel-related costs, including salaries and benefits, bonuses, and stock-based compensation related to management of our contract manufacturer, and allocated shared costs (including rent and information technology). Fulfillment costs primarily consist of costs incurred in the shipping and handling of inventory, including shipping costs to our customers, and personnel-related costs, including salaries and benefits, bonuses, and stock-based compensation related to receiving, inspecting, warehousing, and preparing systems and kits for shipment. Customer service costs primarily consists of personnel-related costs, including salaries and benefits, bonuses, and stock-based compensation associated with service contracts, travel costs, and allocated shared costs (including rent and information technology). Cost of revenue also includes depreciation of property and equipment associated with cost of revenue activities.

 

62


 

Research and Development

Research and development expenses primarily consist of personnel-related costs, including salaries and benefits, bonuses, and stock-based compensation for our research and development employees, consulting services, clinical studies, supplies, allocated shared costs (including rent and information technology), and depreciation of equipment associated with research and development activities.

Sales and Marketing

Sales and marketing expenses primarily consist of personnel-related costs, including salaries and benefits, bonuses, sales commissions, travel expenses, and stock-based compensation for our sales and marketing employees, consulting services, advertising, direct marketing, tradeshow, and promotional expenses, allocated shared costs (including rent and information technology), and depreciation of property and equipment associated with sales and marketing activities.

General and Administrative

General and administrative expenses primarily consist of personnel-related costs, including salaries and benefits, bonuses, travel expenses, and stock-based compensation for our executive, finance, legal, human resources, information technology and other administrative employees. In addition, general and administrative expenses include fees for third party professional services, including consulting, legal and accounting services and other corporate expenses, allocated shared costs (including rent and information technology), and depreciation of property and equipment associated with general and administrative activities.

Interest Expense

Interest expense consists of interest related to borrowings under our debt obligations.

Other Income (Expense), Net

Other income (expense), net primarily consists of income and expense related to the change in fair value of convertible preferred stock warrant liabilities. Upon the completion of the IPO, the liability on the preferred stock warrants was reclassified to additional paid-in capital in stockholders’ equity (deficit).

Provision for Income Taxes

Provision for income taxes primarily consists of state and foreign income taxes. Due to cumulative losses, we maintain a valuation allowance against our deferred tax assets. We consider all available evidence, both positive and negative, in assessing the extent to which a valuation allowance should be applied against our deferred tax assets.

In December 2017, the United States enacted the 2017 U.S. Tax Cuts and Jobs Act, which among other things reduced the U.S. federal corporate tax rate from 35% to 21% for tax years beginning after December 31, 2017. As a result of the reduction in the federal corporate tax rate, we recorded a non-cash deferred tax expense of $20.7 million related to the remeasurement of our deferred tax assets, with corresponding reduction in the valuation allowance.

 

63


 

Results of Operations

Year Ended December 31, 2017 Compared to Year Ended December 31, 2016

 

 

 

Year Ended

December 31,

 

 

Change

 

 

 

2017

 

 

2016

 

 

$

 

 

%

 

 

 

(dollars in thousands)

 

 

 

 

 

 

 

 

 

Revenue, net

 

$

21,297

 

 

$

15,600

 

 

$

5,697

 

 

 

37

%

Cost of revenue

 

 

12,150

 

 

 

10,431

 

 

 

1,719

 

 

 

16

 

Gross profit

 

 

9,147

 

 

 

5,169

 

 

 

3,978

 

 

 

77

 

Gross margin

 

 

43

%

 

 

33

%

 

 

 

 

 

 

 

 

Operating expenses:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Research and development

 

 

7,135

 

 

 

7,474

 

 

 

(339

)

 

 

(5

)

Sales and marketing

 

 

14,390

 

 

 

12,483

 

 

 

1,907

 

 

 

15

 

General and administrative

 

 

4,904

 

 

 

4,144

 

 

 

760

 

 

 

18

 

Total operating expenses

 

 

26,429

 

 

 

24,101

 

 

 

2,328

 

 

 

10

 

Loss from operations

 

 

(17,282

)

 

 

(18,932

)

 

 

1,650

 

 

 

(9

)

Other income (expense), net:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Interest expense

 

 

(2,027

)

 

 

(2,483

)

 

 

456

 

 

 

(18

)

Gain on sale of investment

 

 

1,851

 

 

 

 

 

 

1,851

 

 

 

 

Other income (expense), net

 

 

(328

)

 

 

(431

)

 

 

103

 

 

 

(24

)

Total other income (expense)

 

 

(504

)

 

 

(2,914

)

 

 

2,410

 

 

 

(83

)

Net loss before provision for income taxes

 

 

(17,786

)

 

 

(21,846

)

 

 

4,060

 

 

 

(19

)

Provision for income taxes

 

 

56

 

 

 

 

 

 

56

 

 

 

 

Net loss

 

$

(17,842

)

 

$

(21,846

)

 

$

4,004

 

 

 

(18

)%

 

Revenue, Net

Revenue increased $5.7 million, or 37%, to $21.3 million in 2017, compared to $15.6 million in 2016. The overall increase in revenue was primarily due to an increase in system revenue of $4.2 million, or 58%, to $11.4 million in 2017, compared to $7.2 million in 2016. The increase in system revenue was due to increased unit sales, as we sold 47 systems in 2017, compared to 32 systems in 2016 largely as a result of increased sales and marketing activities. Procedures based fees increased $1.1 million, or 16% to $8.0 million in 2017, compared to $6.9 million in 2016.  Service related fees increased $0.4 million, or 27% to $1.9 million in 2017, compared to $1.5 million in 2016, primarily due to an increase in post-warranty maintenance contracts sold during 2017.

Cost of Revenue

Cost of revenue increased $1.7 million to $12.1 million in 2017, compared to $10.4 million in 2016, primarily as a result of the increase in the number of ARTAS Systems sold during the year.  Gross margin increased to 43% in 2017, compared to 33% in 2016.  The increase in gross margin was the result of reduced procedure kit costs and a decrease in average customer support spending as we improved our service cost efficiency.

Research and Development

Research and development expense decreased $0.4 million to $7.1 million in 2017, compared to $7.5 million in 2016. The decrease was primarily due to lower headcount in software and hardware department in 2017 versus the comparable period in 2016.  

Sales and Marketing

Sales and marketing expenses increased $1.9 million to $14.4 million in 2017, compared to $12.5 million in 2016. The increase was primarily due to an increase in spending in advertising and other marketing activities in connection with our ongoing commercialization efforts of the ARTAS System.

 

64


 

General and Administrative

General and administrative expenses increased $0.8 million to $4.9 million in 2017, compared to $4.1 million in 2016. The increase was primarily the result of an increase in professional service costs, consisting of accounting, consulting, legal and other professional fees incurred in connection with our preparation to become a public company.

Interest Expense

Interest expense decreased $0.5 million to $2.0 million in 2017, compared to $2.5 million in 2016.  The decrease in interest expense was related to a reduction in the principal balance of our outstanding long-debt obligations as we repaid a portion of the principal on our outstanding credit facility with Oxford Finance, LLC (Oxford).

Gain on Sale of Stock Investment

In the fourth quarter of 2017, the Company recognized a gain of $1.8 million on the sale of stock held in a privately-held company that had been impaired and written-down to nil prior to fiscal year 2014.  There was no such activity in 2016.

Other Income (Expense), Net

Other income (expense) decreased $0.1 million to $0.3 million in 2017, compared to $0.4 million in 2016. The decrease in the other expense related to the change in fair value of our convertible preferred stock warrant liability. The expense was consistent between the periods as there were no changes between the periods in the number of convertible preferred stock warrants outstanding.

Year Ended December 31, 2016 Compared to Year Ended December 31, 2015

 

 

 

Year Ended

December 31,

 

 

Change

 

 

 

2016

 

 

2015

 

 

$

 

 

%

 

 

 

(dollars in thousands)

 

 

 

 

 

Revenue, net

 

$

15,600

 

 

$

17,230

 

 

$

(1,630

)

 

 

(9

)%

Cost of revenue

 

 

10,431

 

 

 

12,513

 

 

 

(2,082

)

 

 

(17

)

Gross profit

 

 

5,169

 

 

 

4,717

 

 

 

452

 

 

 

10

 

Gross margin

 

 

33

%

 

 

27

%

 

 

 

 

 

 

 

 

Operating expenses:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Research and development

 

 

7,474

 

 

 

7,399

 

 

 

75

 

 

 

1

 

Sales and marketing

 

 

12,483

 

 

 

14,587

 

 

 

(2,104

)

 

 

(14

)

General and administrative

 

 

4,144

 

 

 

3,256

 

 

 

888

 

 

 

27

 

Total operating expenses

 

 

24,101

 

 

 

25,242

 

 

 

(1,141

)

 

 

(5

)

Loss from operations

 

 

(18,932

)

 

 

(20,525

)

 

 

1,593

 

 

 

(8

)

Other income (expense), net:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Interest expense

 

 

(2,483

)

 

 

(2,892

)

 

 

409

 

 

 

(14

)

Other income (expense), net

 

 

(431

)

 

 

446

 

 

 

(877

)

 

 

(197

)

Total other income (expense)

 

 

(2,914

)

 

 

(2,446

)

 

 

(468

)

 

 

19

 

Net loss before provision for income taxes

 

 

(21,846

)

 

 

(22,971

)

 

 

1,125

 

 

 

(5

)

Provision for income taxes

 

 

 

 

 

 

 

 

 

 

 

 

Net loss

 

$

(21,846

)

 

$

(22,971

)

 

$

1,125

 

 

 

(5

)%

 

 

65


 

Revenue, Net

Revenue decreased $1.6 million, or 9%, to $15.6 million in 2016, compared to $17.2 million in 2015. System revenue decreased $3.4 million, or 32%, to $7.2 million in 2016, compared to $10.6 million in 2015. The decrease was primarily attributable to decreased unit sales as we sold 32 ARTAS systems in 2016, compared to 46 ARTAS systems in 2015 as a result of our implementation of certain strategic changes in our U.S. sales force in 2016, which disrupted some sales activities during this period. The average sales price of the ARTAS System for 2016 decreased slightly compared to the average sales price during 2015 due to changes in the mix of geographical regions where systems were sold. Procedure based fees increased $1.1 million, or 19%, to $6.9 million in 2016, compared to $5.8 million in 2015, primarily as a result of a higher number of ARTAS procedures due to a larger installed base. Service related fees increased $0.6 million, or 67%, to $1.5 million in 2016, compared to $0.9 million in 2015, primarily due to the increase in post-warranty maintenance contracts sold as a result of the larger installed base.

Cost of Revenue

Cost of revenue decreased $2.1 million to $10.4 million in 2016, compared to $12.5 million in 2015, primarily as a result of the decrease in the number of ARTAS Systems sold during the year. Gross margin increased to 33% in 2016, compared to 27% in 2015. The increase in gross margin was primarily due to increase in service-related fees from maintenance contracts as a result of the larger installed base while related customer support costs spending remained relatively flat. Similarly, there was an increase in procedure based fees, which did not result in significant incremental costs due to reduction in costs of disposable kits.

Research and Development

Research and development expenses increased $0.1 million to $7.5 million in 2016, compared to $7.4 million in 2015. The increase was related to salaries, benefits and consulting expenses related to on-going research and development activity.

Sales and Marketing

Sales and marketing expenses decreased $2.1 million to $12.5 million in 2016, compared to $14.6 million in 2015. The reduction was primarily due to lower personnel-related costs due to reduced headcount which resulted in a decrease of $1.3 million, as well as a reduction in spending on advertising and other marketing activities, as a result of our ongoing effort to be more efficient and cost effective in connection with marketing spending which resulted in a decrease of $0.8 million.

General and Administrative

General and administrative expenses increased $0.9 million to $4.1 million in 2016, compared to $3.2 million in 2015. The increase was primarily attributable to $0.5 million in severance expenses related to the departure of our former CEO, and $0.4 million of increased personnel-related costs.

Interest Expense

Interest expense decreased $0.4 million to $2.5 million in 2016, compared to $2.9 million in 2015. The decrease was mainly due to incurring $0.7 million of interest expense related to the early termination of our loans with Comerica Bank and Triple Point Capital in May 2015, with no similar expense recorded during 2016. The increase was offset primarily by higher interest expense related to our loan agreement with Oxford Finance LLC, or Oxford, due to a higher interest rate and outstanding balance when compared to our loans with Comerica Bank and Triple Point Capital.

Other Income (Expense), Net

Other income (expense), net decreased $0.9 million to $0.4 million of expense in 2016, compared to $0.5 million of income in 2015. The decrease was mainly due to the change in fair value of our convertible preferred stock warrant liability, resulting in expense of $0.3 million in 2016 compared to income of $0.6 million in 2015.

 

66


 

Liquidity and Capital Resources

To date, we have incurred significant net losses and negative cash flows from operations. Our net loss was $17.8 million, $21.8 million, and $23.0 million for the years ended December 31, 2017, 2016 and 2015, respectively. As of December 31, 2017, we had an accumulated deficit of $164.5 million. Our principal sources of liquidity as of December 31, 2017 were cash and cash equivalents of $23.5 million.

In October 2017, we closed our IPO and sold an aggregate of 3,897,910 shares of its common stock, (inclusive of 322,910 shares of common stock issued pursuant to the exercise of the underwriters’ option to purchase additional shares) at a price of $7.00 per share. We received aggregate cash proceeds of approximately $22.1 million from the IPO, net of underwriting discounts and commissions and offering costs.

Debt Obligations

In May 2015, we entered into a loan and security agreement with Oxford pursuant to which we borrowed $20 million. The loan will mature in July 2019. The loan with Oxford accrues interest at prime plus 8.5% per annum. Prior to January 1, 2017, only accrued interest on the borrowed amounts was due and payable on a monthly basis, with any outstanding accrued but unpaid interest being payable on the date we borrowed any additional amounts pursuant to the loan agreement if such funding date was not a regular interest payment date. Following January 1, 2017, the outstanding principal amounts on the borrowed amounts, plus accrued and unpaid interest, was due and payable in equal monthly amounts pursuant to a repayment schedule of 30 equal monthly payments such that all amounts outstanding are repaid on or by July 1, 2019. Our obligations under the loan with Oxford are secured by all of our current and future assets, excluding any of our intellectual property. The outstanding principal balance on the Oxford loan was $13.3 million as of December 31, 2017. The loan agreement with Oxford contains various covenants. As of December 31, 2017, we were in compliance with all required covenants.

In September 2017, we issued $5.0 million in subordinated convertible notes (Convertible Notes) that accrued interest at 5.0% per annum, in a private placement transaction with certain of our existing stockholders and their affiliated entities, including investors affiliated with certain of our directors.  Pursuant to the terms of the Convertible Notes, the aggregate outstanding principal and unpaid but accrued interest automatically converted into 718,184 shares of the Company’s common stock upon the consummation of the IPO.  There was no outstanding balance on the Convertible Notes as of December 31, 2017.

Capital Resources

We have financed our operations principally through the issuance and sale of our common stock in our IPO, private placements of our equity securities, and to a lesser extent, secured debt financing, exercises of our common stock warrants, and payments from customers. We anticipate that our existing cash and cash equivalents and cash generated from sales of our products, will not be sufficient to fund our current operating plans through the next 12 months. We based our projections on the amount of time through which our financial resources will be adequate to support our operations on assumptions that may prove to be incorrect and we may use all our available capital resources sooner than we expect.  Because of the numerous risks and uncertainties associated with the ongoing commercialization of the ARTAS System, we are unable to estimate the exact amount of our operating capital requirements. Our future funding requirements will depend on many factors, including, but not limited to:

 

the revenue we generate from our operations;

 

the scope and timing of our investment in our commercial infrastructure and salesforce;

 

the costs of commercialization activities including product sales, marketing, manufacturing and distribution;

 

the degree and rate of market acceptance of the ARTAS System and the ARTAS procedure;

 

the costs of filing, prosecuting, defending and enforcing any patent claims and other intellectual property rights;

 

our need to implement additional infrastructure and internal systems;

 

the research and development activities we intend to undertake in order to expand the approved indications of use for the ARTAS System;

 

the emergence of competing technologies or other adverse market developments;

 

67


 

 

a ny product liability or other lawsuits related to our products;

 

the expenses needed to attract and retain skilled personnel;

 

the costs associated with being a public company; and

 

the costs associated with maintaining subsidiaries in foreign jurisdictions.

We cannot assure that we will ever be profitable or generate positive cash flow from operating activities.

We plan to continue to fund our current operating plans’ needs through equity financings or other arrangements. To the extent that we raise additional capital through future equity financings, the ownership interest of our stockholders will be diluted, and the terms of these securities may include liquidation or other preferences that adversely affect the rights of our existing common stockholders. If we raise additional funds through the issuance of debt securities, these securities could contain covenants that would restrict our operations. There can be no assurance that such additional financing, if available, can be obtained on terms acceptable to us. If we are unable to obtain such additional financing, we would need to reevaluate our future operating plans.

Cash flows

The following table summarizes our cash flows for the periods indicated:

 

 

 

Year Ended December 31,

 

 

 

2017

 

 

2016

 

 

2015

 

 

 

(dollars in thousands)

 

Cash used in operating activities

 

$

(19,256

)

 

$

(16,164

)

 

$

(24,118

)

Cash provided by (used in) investing activities

 

 

1,622

 

 

 

(1,171

)

 

 

(456

)

Cash provided by financing activities

 

 

29,366

 

 

 

12,114

 

 

 

8,887

 

 

Cash Flows from Operating Activities

In 2017, cash used in operating activities of $19.3 million was attributable to a net loss of $17.8 million, partially offset by $0.2 million in non-cash charges and a decrease from operating assets and liabilities of $1.7 million. The non-cash charges consisted primarily of depreciation and amortization of $0.6 million, amortization of debt issuance cost of $0.5 million, stock-based compensation of $0.5 million, and change in fair value of preferred stock warrant liabilities of $0.4 million, offset by $1.8 million of gain on sale of investment. The net change in operating assets and liabilities was primarily attributable to an increase in accounts receivable of $1.4 million, in prepaid expenses and other assets of $0.8 million, and an overall increase in accounts payable and accrued and other liabilities of $0.5 million due to the timing of receipt and payment of vendor invoices.

In 2016, cash used in operating activities of $16.2 million was attributable to a net loss of $21.8 million, partially offset by $2.2 million in non-cash charges and a net change in net operating assets and liabilities of $3.4 million. The non-cash charges consisted primarily of depreciation and amortization of $0.7 million, amortization of debt issuance costs of $0.7 million, stock-based compensation of $0.5 million, and change in fair value of preferred stock warrant liabilities of $0.3 million. The net change in operating assets and liabilities of $3.4 million was primarily attributable to a $2.9 million decrease in inventory due to the sale of inventory in excess of purchases, an overall increase of $1.2 million in accounts payable and accrued and other liabilities due to growth in operations and the timing of receipt and payment of vendor invoices, and a decrease of $0.3 million in prepaid expenses and other assets, partially offset by a $1.0 million increase in accounts receivable due to an increase in our post-warranty ARTAS Care maintenance and support contracts sold.

In 2015, cash used in operating activities of $24.1 million was attributable to a net loss of $23.0 million and a decrease from net change in operating assets and liabilities of $3.0 million, partially offset by non-cash charges of $1.9 million. The non-cash charges consisted primarily of amortization of debt issuance costs of $1.2 million, depreciation and amortization of $0.9 million, and stock-based compensation of $0.4 million, partially offset by change in fair value of preferred stock warrant liabilities of $0.6 million. The net change in operating assets and liabilities of $3.0 million was primarily attributable to a $3.4 million increase in inventory due to the purchase of inventory in excess of sales and an overall decrease of $3.5 million in accounts payable and accrued and other liabilities due to the timing of receipt and payment of vendor invoices, partially offset by a $3.5 million decrease in accounts receivable due to stronger collections from customers and a decrease of $0.4 million in prepaid expense and other assets.

 

68


 

Cash Flows from Investing Activities

In 2017, cash provided by investing activities related to the sale of an investment in a privately-held company in the amount of $1.8 million, offset by $0.2 million in purchases of property and equipment.

In 2016, cash used in investing activities related primarily to tenant improvements paid by the landlord of our headquarters in San Jose, California.  

In 2015, cash used in investing activities related to purchases of property and equipment.

Cash Flows from Financing Activities

In 2017, cash provided by financing activities was $29.3 million, consisting primarily of $22.1 million in net proceeds (including the payment of $2.9 million of deferred offering costs) received from the issuance of common stock upon in connection with our IPO, $10.2 million in net proceeds from the issuance of our Series C convertible preferred stock, and $5.0 million from the issuance of the Convertible Notes. Cash provided by financing activities was partially offset by repaying $8.0 million of the outstanding principal on our outstanding debt obligation with Oxford.

In 2016, cash provided by financing activities was $12.1 million received from the issuance of our Series C convertible preferred stock.

In 2015, cash provided by financing activities was $8.9 million, consisting primarily of $4.2 million in proceeds from issuance of our Series C preferred stock and proceeds of $4.6 million from the Oxford loan.

Contractual Obligations and Other Commitments

The following table summarizes our contractual obligations as of December 31, 2017, which represent material expected or contractually committed future obligations.

 

 

 

Payments Due by Period

 

 

 

Less than

 

 

 

 

 

 

 

 

 

 

More than

 

 

 

 

 

 

 

1 Year

 

 

1 to 3 Years

 

 

3 to 5 Years

 

 

5 Years

 

 

Total

 

 

 

(dollars in thousands)

 

Debt obligations, including interest (1)

 

$

8,708

 

 

$

5,399

 

 

$

 

 

$

 

 

$

14,107

 

Operating leases

 

 

503

 

 

 

1,052

 

 

 

738

 

 

 

 

 

 

2,293

 

Total contractual obligations

 

$

9,211

 

 

$

6,451

 

 

$

738

 

 

$

 

 

$

16,400

 

 

(1)

Represents our loan with Oxford and our anticipated repayment schedule for the loan. Pursuant to our loan agreement with Oxford, the loan will mature in July 2019. The loan with Oxford accrues interest at prime plus 8.5% per annum. The outstanding principal balance on the Oxford loan was $21.3 million at December 31, 2016 and $13.3 million as of December 31, 2017, which includes a final payment of $1.3 million to Oxford on the maturity of the loan.

Off-Balance Sheet Arrangements

We do not currently engage in off-balance sheet financing arrangements. In addition, we do not have any interest in entities referred to as variable interest entities, which includes special purpose entities and other structure finance entities.

Critical Accounting Policies and Estimates

Our consolidated financial statements are prepared in accordance with U.S GAAP. The preparation of these consolidated financial statements requires us to make estimates and assumptions that affect the reported amounts of assets, liabilities, revenue, costs and expenses, and related disclosures. These estimates form the basis for judgments we make about the carrying values of our assets and liabilities, which are not readily apparent from other sources. We base our estimates and judgments on historical experience and on various other assumptions that we believe are reasonable under the circumstances. On an ongoing basis, we evaluate our estimates and assumptions. Our actual results may differ from these estimates under different assumptions or conditions.

While our significant accounting policies are more fully described in Note 2 to our consolidated financial statements included in this Report, we believe that the assumptions and estimates associated with stock-based compensation, preferred stock warrant liabilities, revenue recognition and income taxes have the most

 

69


 

significant impact on our consolidated financial statements. Therefore, we consider these to be our critical accounting policies and estimates.

Stock-Based Compensation

U.S. GAAP requires the measurement and recognition of compensation expense for all share-based payment awards, including stock options, using a fair-value based method. The Company estimates the fair value of share-based payment awards on the date of grant using a Black-Scholes-Merton option-pricing model. Stock-based compensation is recognized on a straight-line basis over the requisite service period based on awards ultimately expected to vest. Forfeitures are estimated at the time of grant and revised, if necessary, in subsequent periods if actual forfeitures differ from those estimates.

Stock-based awards granted to non-employees are accounted for at fair value. The associated expense is recognized by the Company over the period the services are performed by non-employees. The fair value of stock-based awards granted to non-employees was nominal for the years ended December 31, 2017, 2016 and 2015.

Preferred Stock Warrants Liabilities

The Company accounted for its freestanding warrants to purchase shares of convertible preferred stock that are contingently redeemable as liabilities in the consolidated balance sheets at their estimated fair value because these warrants may have obligated the Company to redeem them at some point in the future. Accordingly, at the end of each reporting period, the Company recorded changes in the estimated fair value of the warrants in other income (expense), net in the consolidated statements of operations. Upon the closing of the IPO (as discussed in Note 1 to our consolidated statements included herein), all outstanding preferred stock warrants were converted into common stock warrants and the liability on the preferred stock warrants was reclassified to additional paid-in capital in stockholders’ equity (deficit) and was no longer subject to remeasurement.

Income Taxes

Income taxes are accounted for under the asset and liability method. Deferred tax assets and liabilities are recognized for the future tax consequences attributable to differences between the tax and financial reporting bases of the Company’s assets and liabilities. Deferred tax assets and liabilities are measured using enacted tax rates expected to apply to taxable income in future years in which those temporary differences are expected to be recovered or settled. Deferred tax assets are reduced through the establishment of a valuation allowance, if, based upon available evidence, it is determined that it is more likely than not that the deferred tax assets will not be realized. All deferred tax assets and liabilities are classified as non-current in the consolidated financial statements.

As further discussed in Note 12, Income Taxes, in the accompanying consolidated financial statements, we are assessing the impact of the U.S. tax reform that was enacted in December 2017. As a result of the new tax rule, we reduced our income tax rate from 35% to 21% for tax years beginning after December 31, 2017 resulting in a $20.7 million decrease in the deferred tax asset and the corresponding valuation allowance.

JOBS Act Accounting Election

We are an emerging growth company, as defined in the Jumpstart Our Business Startups Act of 2012, or the JOBS Act. Under the JOBS Act, emerging growth companies can delay adopting new or revised accounting standards issued subsequent to the enactment of the JOBS Act until such time as those standards apply to private companies. We have elected to use this extended transition period for complying with new or revised accounting standards that have different effective dates for public and private companies until the earlier of the date we (i) are no longer an emerging growth company or (ii) affirmatively and irrevocably opt out of the extended transition period provided in the JOBS Act. As a result, our financial statements may not be comparable to companies that comply with new or revised accounting pronouncements as of public company effective dates.

Recent Accounting Pronouncements

See Note 2 to our consolidated financial statements included elsewhere in this Annual Report on Form 10-K for recently adopted accounting pronouncements and recently issued accounting pronouncements not yet adopted as of the date of this Annual Report on Form 10-K.

Item 7A.

Quantitative and Qualitative Disclosures About Market Risk.

We are exposed to market risks in the ordinary course of our business. These risks primarily relate to interest rate and currency exchange rate fluctuations.

 

70


 

Interest Rate Risk

Our cash and cash equivalents are held in cash deposits and money market funds. Due to the short-term nature of these instruments, we do not believe that we have any material exposure to changes in the fair value of our investment portfolio as a result of changes in interest rates. Declines in interest rates, however, would reduce our future interest income.

We are exposed to interest rate risk related to our debt obligations which are subject to variable interest rates. As of December 31, 2017, a 100 basis point increase in interest rates on our debt subject to variable interest rate fluctuations would increase our interest expense $0.1 million annually.

Foreign Currency Risk

Our sales contracts are primarily denominated in U.S. dollars and, therefore, substantially all of our revenue is not subject to foreign currency risk. However, a strengthening of the U.S. Dollar could increase the real cost of our products to our customers outside of the U.S., which could adversely affect our financial condition and operating results. In addition, a portion of our operating expenses are incurred outside the U.S. and are denominated in foreign currencies and are subject to fluctuations due to changes in foreign currency exchange rates, particularly changes in the British Pound Sterling, Euro, Hong Kong Dollar, and South Korean Won. Additionally, fluctuations in foreign currency exchange rates may cause us to recognize transaction gains and losses in our statement of operations. A 10% increase or decrease in current exchange rates would not have a material effect on our financial results. To date, foreign currency transaction gains and losses have not been material to our consolidated financial statements, and we have not engaged in any foreign currency hedging transactions.

Item 8.

Consolidated Financial Statements and Supplementary Data.

 

71


 

INDEX TO CONSOLIDATED FINANCIAL STATEMENTS

 

ReSTORATION ROBOTICS

 

Page

Report of Independent Registered Public Accounting Firm

 

73

Consolidated Balance Sheets

 

74

Consolidated Statements of Operations

 

75

Consolidated Statements of Comprehensive Loss

 

76

Consolidated Statements of Convertible Preferred Stock and Stockholders’ Equity (Deficit)

 

77

Consolidated Statements of Cash Flows

 

78

Notes to Consolidated Financial Statements

 

79

 

 

 

 

72


 

REPORT OF INdependent regist ered Public accounting Firm

Board of Directors and Stockholders

Restoration Robotics, Inc.

Opinion on the financial statements

We have audited the accompanying consolidated balance sheets of Restoration Robotics, Inc. a Delaware corporation, and subsidiaries (the “Company”) as of December 31, 2017 and 2016, the related consolidated statements of operations, comprehensive loss, convertible preferred stock and stockholders’ equity (deficit), and cash flows for each of the three years in the period ended December 31, 2017, and the related notes (collectively referred to as the “financial statements”). In our opinion, the financial statements present fairly, in all material respects, the financial position of the Company as of December 31, 2017 and 2016, and the results of its operations and its cash flows for each of the three years in the period ended December 31, 2017, in conformity with accounting principles generally accepted in the United States of America.

Going concern uncertainty

The accompanying financial statements have been prepared assuming that the Company will continue as a going concern. As discussed in Note 2 to the financial statements, the Company suffered recurring losses from operations, negative cash flows since inception and has a net stockholders’ deficit. These conditions, along with other matters as set forth in Note 2, raise substantial doubt about its ability to continue as a going concern. Management’s plans in regard to these matters are also described in Note 2. The financial statements do not include any adjustments that might result from the outcome of this uncertainty.

Basis for opinion

These financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on the Company’s financial statements based on our audits. We are a public accounting firm registered with the Public Company Accounting Oversight Board (United States) (“PCAOB”) and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement, whether due to error or fraud. The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. As part of our audits we are required to obtain an understanding of internal control over financial reporting but not for the purpose of expressing an opinion on the effectiveness of the Company’s internal control over financial reporting. Accordingly, we express no such opinion.

Our audits included performing procedures to assess the risks of material misstatement of the financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the financial statements. We believe that our audits provide a reasonable basis for our opinion.

/s/ GRANT THORNTON LLP

We have served as the Company’s auditor since 2008.

Denver, CO

March 5, 2018

 

 

73


 

RESTORATION R OBOTICS, INC.

Consolidated Balance Sheets

(in thousands, except share and per share data)

 

 

 

Year Ended, December 31,

 

 

 

2017

 

 

2016

 

ASSETS

 

 

 

 

 

 

 

 

CURRENT ASSETS:

 

 

 

 

 

 

 

 

Cash and cash equivalents

 

$

23,545

 

 

$

11,906

 

Accounts receivable, net

 

 

3,864

 

 

 

2,481

 

Inventory

 

 

2,761

 

 

 

2,742

 

Prepaid expenses and other current assets

 

 

1,562

 

 

 

810

 

Total current assets

 

 

31,732

 

 

 

17,939

 

Property and equipment, net

 

 

1,138

 

 

 

1,459

 

Other assets

 

 

100

 

 

 

100

 

TOTAL ASSETS

 

$

32,970

 

 

$

19,498

 

LIABILITIES, CONVERTIBLE PREFERRED STOCK AND

   STOCKHOLDERS’ EQUITY (DEFICIT)

 

 

 

 

 

 

 

 

CURRENT LIABILITIES:

 

 

 

 

 

 

 

 

Accounts payable

 

$

2,044

 

 

$

1,740

 

Accrued and other liabilities

 

 

2,755

 

 

 

2,438

 

Deferred revenue

 

 

1,517

 

 

 

1,423

 

Current portion of long-term debt, net of discount of $270 and $551

   as of December 31, 2017 and 2016

 

 

7,730

 

 

 

7,449

 

Total current liabilities

 

 

14,046

 

 

 

13,050

 

Other long-term liabilities

 

 

459

 

 

 

563

 

Preferred stock warrant liabilities

 

 

 

 

 

693

 

Long-term debt, net of discount of $29 and $299 as of December 31,

   2017 and 2016

 

 

5,271

 

 

 

13,001

 

TOTAL LIABILITIES

 

 

19,776

 

 

 

27,307

 

Commitments and Contingencies (Note 6)

 

 

 

 

 

 

 

 

Convertible preferred stock, $0.0001 par value; no and 236,154,444

   shares authorized as of December 31, 2017 and 2016; no and 21,142,295

   shares issued and outstanding as of December 31, 2017 and 2016;

   aggregate liquidation preference of no and $142,231 as of December 31,

   2017 and 2016

 

 

 

 

 

135,735

 

STOCKHOLDERS’ EQUITY (DEFICIT):

 

 

 

 

 

 

 

 

Preferred stock, $0.0001 par value: 10,000,000 and no shares authorized

   as of December 31, 2017 and 2016; no shares issued and outstanding

   as of December 31, 2017 and 2016

 

 

 

 

 

 

Common stock, $0.0001 par value: 300,000,000 and 350,490,000 shares

   authorized as of December 31, 2017 and 2016; 28,940,282 and 1,615,495

   shares issued and outstanding as of December 31, 2017 and 2016

 

 

3

 

 

 

 

Additional paid-in capital

 

 

177,757

 

 

 

3,087

 

Accumulated other comprehensive income (loss)

 

 

(79

)

 

 

14

 

Accumulated deficit

 

 

(164,487

)

 

 

(146,645

)

TOTAL STOCKHOLDERS’ EQUITY (DEFICIT)

 

 

13,194

 

 

 

(143,544

)

TOTAL LIABILITIES, CONVERTIBLE PREFERRED STOCK AND

   STOCKHOLDERS’ EQUITY (DEFICIT)

 

$

32,970

 

 

$

19,498

 

 

The accompanying notes are an integral part of these consolidated financial statements.

 

74


 

RESTORATION ROBOTICS, INC.

Consolidated Statements of Operations

(in thousands, except share and per share data)

 

 

 

Year Ended, December 31,

 

 

 

2017

 

 

2016

 

 

2015

 

Consolidated Statements of Operations Data:

 

 

 

 

 

 

 

 

 

 

 

 

Revenue, net

 

$

21,297

 

 

$

15,600

 

 

$

17,230

 

Cost of revenue

 

 

12,150

 

 

 

10,431

 

 

 

12,513

 

Gross profit

 

 

9,147

 

 

 

5,169

 

 

 

4,717

 

Operating expenses:

 

 

 

 

 

 

 

 

 

 

 

 

Research and development

 

 

7,135

 

 

 

7,474

 

 

 

7,399

 

Sales and marketing

 

 

14,390

 

 

 

12,483

 

 

 

14,587

 

General and administrative

 

 

4,904

 

 

 

4,144

 

 

 

3,256

 

Total operating expenses

 

 

26,429

 

 

 

24,101

 

 

 

25,242

 

Loss from operations

 

 

(17,282

)

 

 

(18,932

)

 

 

(20,525

)

Other income (expense), net:

 

 

 

 

 

 

 

 

 

 

 

 

Interest expense

 

 

(2,027

)

 

 

(2,483

)

 

 

(2,892

)

Gain on sale of investment

 

 

1,851

 

 

 

 

 

 

 

Other income (expense)

 

 

(328

)

 

 

(431

)

 

 

446

 

Total other income (expense), net

 

 

(504

)

 

 

(2,914

)

 

 

(2,446

)

Net loss before provision for income taxes

 

 

(17,786

)

 

 

(21,846

)

 

 

(22,971

)

Provision for income taxes

 

 

56

 

 

 

 

 

 

 

Net loss

 

$

(17,842

)

 

$

(21,846

)

 

$

(22,971

)

Net loss per share, basic and diluted

 

$

(2.42

)

 

$

(13.54

)

 

$

(14.70

)

Weighted-average shares used in computing net loss per share,

   basic and diluted

 

 

7,382,715

 

 

 

1,612,933

 

 

 

1,562,829

 

 

The accompanying notes are an integral part of these consolidated financial statements.

 

75


 

RESTORATION ROBOTICS, INC.

Consolidated Statements of Comprehensive Loss

(in thousands, except share and per share data)

 

 

 

Year Ended December 31,

 

 

 

2017

 

 

2016

 

 

2015

 

Net loss

 

$

(17,842

)

 

$

(21,846

)

 

$

(22,971

)

Other comprehensive income (loss):

 

 

 

 

 

 

 

 

 

 

 

 

Cumulative translation adjustment

 

 

(93

)

 

 

 

 

 

14

 

Comprehensive loss

 

$

(17,935

)

 

$

(21,846

)

 

$

(22,957

)

 

The accompanying notes are an integral part of these consolidated financial statements.

 

 

76


 

RESTORATION ROBOTICS, INC.

Consolidated Statement of Convertible Preferred Stock and Stockholders’ Equity (Deficit)

(in thousands, except share and per share data)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Accumulated

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Additional

 

 

Other

 

 

 

 

 

 

Total

 

 

 

Convertible Preferred Stock

 

 

Common Stock

 

 

Paid-

 

 

Comprehensive

 

 

Accumulated

 

 

Stockholders’

 

 

 

Shares

 

 

Amount

 

 

Shares

 

 

Amount

 

 

in Capital

 

 

Income (Loss)

 

 

Deficit

 

 

Equity   (Deficit)

 

Balance — January 1, 2015

 

 

18,662,525

 

 

$

119,487

 

 

 

1,515,384

 

 

$

 

 

$

2,021

 

 

$

 

 

$

(101,828

)

 

$

(99,807

)

Issuance of common stock pursuant to stock option

   exercises of vested options

 

 

 

 

 

 

 

 

79,893

 

 

 

 

 

 

111

 

 

 

 

 

 

 

 

 

111

 

Issuance of Series C convertible preferred stock for cash,

   net of issuance costs of $646

 

 

674,252

 

 

 

4,175

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Vesting of shares purchased under an early exercise of

   stock options

 

 

 

 

 

 

 

 

 

 

 

 

 

 

19

 

 

 

 

 

 

 

 

 

19

 

Stock-based compensation

 

 

 

 

 

 

 

 

 

 

 

 

 

 

429

 

 

 

 

 

 

 

 

 

429

 

Other comprehensive income

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

14

 

 

 

 

 

 

 

14

 

Net loss

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(22,971

)

 

 

(22,971

)

Balance — December 31, 2015

 

 

19,336,777

 

 

 

123,662

 

 

 

1,595,277

 

 

 

 

 

 

2,580

 

 

 

14

 

 

 

(124,799

)

 

 

(122,205

)

Issuance of common stock pursuant to stock option

   exercises of vested options

 

 

 

 

 

 

 

 

20,218

 

 

 

 

 

 

41

 

 

 

 

 

 

 

 

 

41

 

Issuance of Series C convertible preferred stock for cash,

   net of issuance costs of $837

 

 

1,805,518

 

 

 

12,073

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Stock-based compensation

 

 

 

 

 

 

 

 

 

 

 

 

 

 

466

 

 

 

 

 

 

 

 

 

466

 

Net loss

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(21,846

)

 

 

(21,846

)

Balance — December 31, 2016

 

 

21,142,295

 

 

 

135,735

 

 

 

1,615,495

 

 

 

 

 

 

3,087

 

 

 

14

 

 

 

(146,645

)

 

 

(143,544

)

Issuance of common stock pursuant to stock option

   exercises of vested options

 

 

 

 

 

 

 

 

21,843

 

 

 

 

 

 

43

 

 

 

 

 

 

 

 

 

43

 

Stock-based compensation

 

 

 

 

 

 

 

 

 

 

 

 

 

 

465

 

 

 

 

 

 

 

 

 

465

 

Issuance of Series C convertible preferred stock for cash

   net of issuance costs of $726

 

 

1,529,306

 

 

 

10,209

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Adjustment for fractional shares from reverse stock split

 

 

 

 

 

 

 

 

137

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Reclassification of preferred stock warrant liabilities to additional

   paid in capital

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1,080

 

 

 

 

 

 

 

 

 

1,080

 

Conversion of convertible notes to common stock

 

 

 

 

 

 

 

 

718,184

 

 

 

 

 

 

5,027

 

 

 

 

 

 

 

 

 

5,027

 

Conversion of preferred stock to common stock upon

   initial public offering

 

 

(22,671,601

)

 

 

(145,944

)

 

 

22,671,601

 

 

 

3

 

 

 

145,941

 

 

 

 

 

 

 

 

 

145,944

 

Issuance of common stock in connection with initial

   public offering, net of issuance costs of $5,171

 

 

 

 

 

 

 

 

3,897,910

 

 

 

 

 

 

22,114

 

 

 

 

 

 

 

 

 

22,114

 

Issuance of common stock upon exercise of common stock

   warrants

 

 

 

 

 

 

 

 

15,112

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Other comprehensive loss

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(93

)

 

 

 

 

 

(93

)

Net loss

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(17,842

)

 

 

(17,842

)

Balance — December 31, 2017

 

 

 

 

$

 

 

 

28,940,282

 

 

$

3

 

 

$

177,757

 

 

$

(79

)

 

$

(164,487

)

 

$

13,194

 

 

The accompanying notes are an integral part of these consolidated financial statements.

 

 

77


 

RESTORATION ROBOTICS, INC.

Consolidated Statements of Cash Flows

(in thousands, except share and per share data)

 

 

 

Year Ended December 31,

 

 

 

2017

 

 

2016

 

 

2015

 

CASH FLOWS FROM OPERATING ACTIVITIES:

 

 

 

 

 

 

 

 

 

 

 

 

Net loss

 

$

(17,842

)

 

$

(21,846

)

 

$

(22,971

)

Adjustments to reconcile net loss to net cash used in operating activities:

 

 

 

 

 

 

 

 

 

 

 

 

Depreciation and amortization

 

 

574

 

 

 

654

 

 

 

860

 

Loss on disposal of property and equipment

 

 

34

 

 

 

46

 

 

 

 

Amortization of debt issuance costs

 

 

551

 

 

 

737

 

 

 

1,209

 

Stock-based compensation

 

 

465

 

 

 

466

 

 

 

429

 

Changes in fair value of preferred stock warrant liabilities

 

 

387

 

 

 

346

 

 

 

(578

)

Gain on sale of investment

 

 

(1,851

)

 

 

 

 

 

 

Non-cash interest expense on convertible notes

 

 

27

 

 

 

 

 

 

 

Changes in operating assets and liabilities:

 

 

 

 

 

 

 

 

 

 

 

 

Accounts receivable

 

 

(1,383

)

 

 

(987

)

 

 

3,501

 

Inventory

 

 

(19

)

 

 

2,892

 

 

 

(3,369

)

Prepaid expenses and other assets

 

 

(752

)

 

 

324

 

 

 

377

 

Accounts payable

 

 

246

 

 

 

709

 

 

 

(1,929

)

Accrued and other liabilities

 

307

 

 

 

495

 

 

 

(1,647

)

Net cash used in operating activities

 

 

(19,256

)

 

 

(16,164

)

 

 

(24,118

)

CASH FLOWS FROM INVESTING ACTIVITIES:

 

 

 

 

 

 

 

 

 

 

 

 

Proceeds from sale of property and equipment

 

 

 

 

 

2

 

 

 

 

Proceeds from sale of investment

 

 

1,851

 

 

 

 

 

 

 

Purchases of property and equipment

 

 

(229

)

 

 

(1,173

)

 

 

(456

)

Net cash provided by (used in) investing activities

 

 

1,622

 

 

 

(1,171

)

 

 

(456

)

CASH FLOWS FROM FINANCING ACTIVITIES:

 

 

 

 

 

 

 

 

 

 

 

 

Proceeds from issuance of common stock upon initial public offering, net

 

 

22,114

 

 

 

 

 

 

 

Proceeds from convertible notes

 

 

5,000

 

 

 

 

 

 

 

Proceeds from issuance of Series C convertible preferred stock, net

 

 

10,209

 

 

 

12,073

 

 

 

4,175

 

Proceeds from exercised stock options

 

 

43

 

 

 

41

 

 

 

111

 

Proceeds from long-term debt, net

 

 

 

 

 

 

 

 

19,601

 

Principal payments on long-term debt

 

 

(8,000

)

 

 

 

 

 

(15,000

)

Net cash provided by financing activities

 

 

29,366

 

 

 

12,114

 

 

 

8,887

 

NET INCREASE (DECREASE) IN CASH, CASH EQUIVALENTS AND

   RESTRICTED CASH

 

 

11,732

 

 

 

(5,221

)

 

 

(15,687

)

Effect of exchange rate changes on cash, cash equivalents and restricted cash

 

 

(93

)

 

 

 

 

 

14

 

CASH, CASH EQUIVALENTS AND RESTRICTED CASH — Beginning of

   period

 

 

12,006

 

 

 

17,227

 

 

 

32,900

 

CASH, CASH EQUIVALENTS AND RESTRICTED CASH — End of

   period

 

$

23,645

 

 

$

12,006

 

 

$

17,227

 

SUPPLEMENTAL DISCLOSURES OF CASH FLOW INFORMATION:

 

 

 

 

 

 

 

 

 

 

 

 

Cash paid for income taxes

 

$

28

 

 

$

56

 

 

$

61

 

Cash paid for interest

 

$

1,497

 

 

$

1,738

 

 

$

1,452

 

SUPPLEMENTAL DISCLOSURES OF NON-CASH INVESTING AND

   FINANCING INFORMATION:

 

 

 

 

 

 

 

 

 

 

 

 

Vesting of shares purchased under an early exercise of stock options

 

$

 

 

$

 

 

$

19

 

Issuance of preferred stock warrants in connection with long-term debt

 

$

 

 

$

 

 

$

256

 

Conversion of preferred stock into common stock

 

$

145,944

 

 

$

 

 

$

 

Reclassification of preferred stock warrant liabilities to equity

 

$

1,080

 

 

$

 

 

$

 

Conversion of convertible notes and accrued interest into common stock

 

$

5,027

 

 

$

 

 

$

 

Non-cash lease incentive

 

$

 

 

$

 

 

$

16

 

 

The accompanying notes are an integral part of these consolidated financial statements.

78


 

RESTORATION ROBOTICS, INC.

Notes to Consolidated Financial Statements

(in thousands, except share and per share data)

1. Nature of Operations

Restoration Robotics, Inc. is a medical device company incorporated in the state of Delaware on November 22, 2002 and headquartered in San Jose, California. The Company develops an image-guided robotic system that enables follicular unit extraction (FUE) for use in the field of hair transplantation and markets the ARTAS® Robotic System in the United States and other countries.  In these notes to the audited consolidated financial statements, the “Company,” “Restoration Robotics,” “we,” “us,” and “our” refers to Restoration Robotics, Inc. and its subsidiaries on a consolidated basis.

Initial Public Offering

On October 11, 2017, the Company’s Registration Statement on Form S-1 (File No. 333-220303) relating to the initial public offering (IPO) of its common stock was declared effective by the Securities and Exchange Commission (SEC). Pursuant to such Registration Statement, the Company completed its IPO of 3,897,910 shares of its common stock (inclusive of 322,910 shares of common stock from the subsequent exercise of the over-allotment option granted to the underwriters) at a price of $7.00 per share for aggregate cash proceeds of approximately $22,114, after deducting underwriter discounts and commissions, and offering costs of $5,171.  

Immediately prior to the closing of the IPO, all outstanding shares of convertible preferred stock converted into 22,671,601 shares of common stock and all the outstanding convertible preferred stock warrants converted into common stock warrants resulting in the reclassification of our preferred stock warrant liabilities to additional paid-in capital. In addition, the principal and accrued interest on the outstanding Convertible Notes converted into 718,184 shares of common stock. The IPO closed on October 16, 2017.

Following the filing of the Restated Certificate of Incorporation of the Company on October 16, 2017, the number of shares of capital stock the Company is authorized to issue is 310,000,000 shares, of which 300,000,000 shares may be common stock and 10,000,000 shares may be preferred stock. Both the common stock and the preferred stock have a par value of $0.0001 per share.

Reverse Stock Split

On September 15, 2017, the Company effected a 1-for-10 reverse stock split of its common stock. Upon the effectiveness of the reverse stock split, (i) every 10 shares of outstanding common stock were combined into one share of common stock, (ii) the number of shares of common stock for which each outstanding option to purchase common stock is exercisable was proportionately decreased on a 1-for-10 basis, (iii) the exercise price of each outstanding option to purchase common stock was proportionally increased on a l-for-10 basis, and (iv) the conversion ratio for each share of outstanding preferred stock which is convertible into our common stock was proportionately reduced on a 1-for-10 basis. All of the outstanding common stock share numbers (including shares of common stock into which our outstanding convertible preferred stock shares are convertible), share prices, exercise prices and per share amounts have been adjusted in these consolidated statements, on a retroactive basis, to reflect this l-for-10 reverse stock split for all periods presented. The par value per share and the authorized number of shares of common stock and convertible preferred stock were not adjusted as a result of the reverse stock split.

2. SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES

Liquidity

These consolidated financial statements are prepared on a going concern basis that contemplates the realization of assets and extinguishment of liabilities in the normal course of business. The Company has incurred net operating losses and negative cash flows from operations since inception. As of December 31, 2017 and 2016, the Company has an accumulated deficit of $164,487 and $146,645 and, as of such dates, did not have sufficient capital to fund its planned operations. As a result of the Company’s recurring losses from operations and negative cash flows, the Company’s independent registered public accounting firm included an explanatory paragraph in its current report on the Company’s consolidated financial statements that such factors raise substantial doubt about the Company’s ability to continue as a going concern. Management plans to manage expenses and obtain additional funds through a combination of equity and debt financing. In order to continue its operations, the Company must achieve profitable

79


 

operations and/or obtain additional financing. Until the Company generates revenue at a level to support its cost structure, the Company expects to continue to incur substantial operating losses and net cash outflows. The Company may never become profitable and even if it does attain profitable operations, it may not be able to s ustain profitability or positive cash flows on a recurring basis.

The Company will need to raise further capital in the future to service its debt or fund its operations until the time it can sustain positive cash flows. There can be no assurance that the Company will be successful in raising additional capital or that such capital, if available, will be on terms that are acceptable to the Company. If the Company is unable to raise sufficient additional capital, it may be compelled to reduce the scope of its operations and planned capital expenditures or sell certain assets, including intellectual property assets.

The accompanying consolidated financial statements have been prepared on a going concern basis, which contemplates the realization of assets and the satisfaction of liabilities in the normal course of business, and, as such, the consolidated financial statements do not include any adjustments relating to the recoverability and classification of recorded asset amounts or amounts and classification of liabilities that might be necessary should the Company be unable to continue in existence.

Basis of Presentation

The accompanying consolidated financial statements have been prepared in accordance with generally accepted accounting principles in the United States of America (U.S. GAAP). The accompanying consolidated financial statements include the accounts of Restoration Robotics, Inc. and its wholly owned subsidiaries.

Principles of Consolidation

The accompanying consolidated financial statements include the accounts of Restoration Robotics, Inc. and its wholly owned subsidiaries, which are located in the United States, United Kingdom, Spain, Hong Kong and South Korea. All significant intercompany accounts and transactions have been eliminated in consolidation.

Use of Estimates

The preparation of the consolidated financial statements in conformity with U.S. GAAP requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities as of the date of the consolidated financial statements and the reported amounts of revenue and expenses during the reporting period. Significant estimates and assumptions made in the accompanying consolidated financial statements include, but are not limited to revenue recognition, the fair value of common stock, the fair value of preferred stock warrant liabilities, and the recoverability of the Company’s net deferred tax assets, and related valuation allowance. The Company evaluates its estimates and assumptions on an ongoing basis using historical experience and other factors and adjusts those estimates and assumptions when facts and circumstances dictate. Actual results could materially differ from those estimates.

Segments

Operating segments are defined as components of an entity for which separate financial information is available and that is regularly reviewed by the Chief Operating Decision Maker (CODM) in deciding how to allocate resources to an individual segment and in assessing performance. The Company's CODM is its Chief Executive Officer. The Company has determined it operates in a single operating segment and has one reportable segment, as the CODM reviews financial information presented on a consolidated basis for purposes of making operating decisions, allocating resources, and evaluating financial performance.

Foreign Currency

The functional currency of the Company’s non-U.S. subsidiaries is the local currency. Asset and liability balances denominated in non-U.S. dollar currencies are translated into U.S. dollars using period-end exchange rates, while revenue and expenses are based upon the exchange rate at the time of the transaction, if known, or at the average rate for the period. Differences are included in stockholders’ equity (deficit) as a component of accumulated other comprehensive loss. Financial assets and liabilities denominated in currencies other than the functional currency are recorded at the exchange rate at the time of the transaction and subsequent gains and losses related to changes in the foreign currency are included in other income (expense), net in the accompanying consolidated statements of operations. The net foreign transaction gain or losses were insignificant for all periods presented.

80


 

Cash and Cash Equivalents

The Company considers all highly liquid investments with an original maturity of three months or less from the date of purchase to be cash equivalents. Cash and cash equivalents consists primarily of funds invested in readily available checking and savings accounts, investments in money market funds and short-term time deposits.

The following table provides a reconciliation of cash, cash equivalents, and restricted cash reported within the balance sheets that sum to the total of the same amounts shown in the statements of cash flows.

 

 

 

December 31,

 

 

 

2017

 

 

2016

 

Cash and cash equivalents

 

$

23,545

 

 

$

11,906

 

Restricted cash

 

 

100

 

 

 

100

 

Total cash, cash equivalents and restricted cash in

   the consolidated statements of cash flows

 

$

23,645

 

 

$

12,006

 

 

Restricted Cash

As of December 31, 2017 and 2016, the Company was required to hold $100 in a separate money market account as collateral for credit cards. These amounts are recorded in other assets in the accompanying consolidated balance sheets.

Concentration of Credit Risk

Financial instruments that potentially subject the Company to a concentration of credit risk consist of cash and cash equivalents, restricted cash and accounts receivable. Substantially all of the Company’s cash and cash equivalents and restricted cash are held with two financial institutions, and the account balances exceed the Federal Deposit Insurance Corporation (FDIC) insurance limit. Accounts are insured by the FDIC up to $250 per financial institution. The Company has not experienced any losses in such accounts with these financial institutions.

Concentration of Customers

For the year ended December 31, 2017, 2016 and 2015, there were no customers accounting for more than 10% of the Company’s revenue.  As of December 31, 2017, two customers each accounted for 10% and 11% of the Company’s accounts receivable. As of December 31, 2016, six customers accounted for 10%, 11%, 11%, 11%, 12%, and 13% of the Company’s accounts receivable.

Allowance for Doubtful Accounts

Accounts receivable do not bear interest and are typically not collateralized. The Company performs ongoing credit evaluations of its customers and maintains reserves for potential credit losses. Accounts receivable are deemed past due in accordance with the contractual terms of the agreement. Accounts are charged against the allowance for doubtful accounts once collection efforts are unsuccessful. Historically, such losses have been within management's expectations. The allowance for doubtful accounts is $229 and $0 at December 31, 2017 and 2016.

Investments

The Company determines the appropriate designation of its investments as “trading”, “available-for-sale” or “held-to-maturity” based on management’s intent at the time of purchase and reevaluates such designated at each reporting date. For all reporting periods presented, the Company’s investments are designated as available-for-sale. The Company determines any realized gains or losses on the sale of any investments on a specific identification method and records such gains and losses in the accompanying consolidated statements of operations.

The Company evaluates its investments periodically for possible other-than-temporary impairment. A decline in fair value below the amortized cost of the investment is considered other-than-temporary impairment if the Company has the intent to sell the investment or it is more likely than not that the Company will be required to sell the investment before recovery of the entire amortized cost basis. In those instances, an impairment charge equal to the difference between the fair value and the amortized cost.

81


 

Inventory

Inventory is stated at the lower of cost or net realizable value and cost is principally determined using the first-in, first-out method. Costs include material, labor and overhead. Inventory that is obsolete or in excess of forecasted usage is written down to its estimated net realizable value based on assumptions about future demand and market conditions. Inventory write-downs are charged to cost of goods sold and a new cost basis for the inventory is established.

Concentration of Supplier

The Company has a single source supplier manufacturing its system. If the supplier is not able to supply the requested orders, the Company would be unable to continue to derive revenue from the sale of systems until an alternative source is found, which could take a considerable length of time.

Property and Equipment

Property and equipment are stated at cost, net of accumulated depreciation and amortization. Depreciation and amortization are computed using the straight-line method over the estimated useful lives of the assets, which is between three and five years. Leasehold improvements are amortized over the lesser of the life of the lease or the useful life of the improvements. Maintenance and repairs are charged to expense as incurred. When assets are retired or otherwise disposed of, the cost and accumulated depreciation are removed from the consolidated balance sheet, and any resulting gain or loss is reflected in operations.

Impairment of Long-Lived Assets

Long-lived assets are reviewed annually for impairment or whenever events or changes in circumstances indicate that the carrying amount of an asset may not be recoverable. Recoverability is measured by comparison of the carrying amount to the future net undiscounted cash flows that the assets are expected to generate. If the carrying amount of an asset group exceeds its estimated future cash flows, an impairment charge is recognized in the amount by which the carrying amount of the asset group exceeds the fair value of the asset group. If such assets are considered to be impaired, the impairment to be recognized is measured by the amount by which the carrying amount of the assets exceeds the projected discounted future net cash flows arising from the asset. There has been no impairment of long-lived assets for any of the periods presented.

Preferred Stock Warrants Liabilities

The Company accounted for its freestanding warrants to purchase shares of convertible preferred stock that are contingently redeemable as liabilities in the consolidated balance sheets at their estimated fair value because these warrants may have obligated the Company to redeem them at some point in the future. At the end of each reporting period, changes in the estimated fair value of the warrants to purchase shares of convertible preferred stock were recorded as other income (expense), net in the consolidated statements of operations. Upon the closing of the IPO (as discussed in Note 1), all outstanding preferred stock warrants were converted into common stock warrants and the liability on the preferred stock warrants was reclassified to additional paid-in capital in stockholders’ equity (deficit) and was no longer subject to remeasurement.

Debt Issuance Costs

Costs related to the issuance of debt are presented as a direct deduction to the carrying value of the debt and are amortized to interest expense using the effective interest rate method over the term of the related debt.

Gain on Sale of Stock Investment

In the fourth quarter of 2017, the Company recognized a gain of $1,851 on the sale of stock held in a privately-held company that had been impaired and written-down to nil prior to fiscal year 2014.

Revenue Recognition

The Company generates revenue from sales of robotic systems and related procedures, and related support and maintenance. The Company derives revenue primarily from two sources: (i) Product revenue, which includes robotic systems sales, installation, software, procedure key and disposable kits; and (ii) Support and maintenance revenue, which includes support, training, and service contracts.

82


 

Revenue is recognized when all of the following criteria are met: (l) persuasive evidence of an arrangement exists; (2) the product or service has been delivered; (3) the sales price is fixed or determinable; and (4) collection is reasonably a ssured.

The Company defines each of the four criteria above as follows:

 

Persuasive Evidence of Arrangement Exists . The Company uses purchase orders pursuant to the terms and conditions of a master agreement to support the evidence of an arrangement with distributors and uses purchase agreements as evidence of arrangement with direct customers.

 

Delivery has Occurred . Provided that all other revenue recognition criteria have been met, for direct sales the Company typically recognizes system revenue upon customer acceptance, or upon shipment for systems sold to distributors, as title and risk of loss are transferred at that time, and there are no further obligations and no rights of return. Procedure revenue is recognized upon shipment of disposable kits and delivery of the ARTAS key. Support and maintenance revenue is recognized over time as the services are delivered.

 

The Sales Price is Fixed or Determinable . The Company assesses whether the fee is fixed or determinable based on the payment terms associated with the transaction. If the terms are extended beyond the Company’s normal payment terms, the Company will recognize revenue as the payments become due. Payments from distributors are not contingent on the distributors’ receiving payment from the end-users.

 

Collection is Reasonably Assured . The Company assesses probability of collection on an individual basis based on a number of factors, including the credit-worthiness of the customer and past transaction history with the customer. The Company generally obtains a significant cash deposit from its customers prior to shipment.

The Company records its revenue net of sales tax and shipping and handling costs. Incremental direct costs incurred related to the acquisition or origination of a customer contract are expensed as incurred.

Multiple Element Arrangements

The Company’s offering includes robotic systems containing software components that function together to provide the essential functionality of the product. Therefore, the Company’s hardware products (inclusive of the core software) are considered non-software deliverables and are not subject to industry-specific software revenue recognition guidance.

The Company’s typical multiple element arrangement includes robotic systems (including the essential software), procedure key, installation (for direct sales to end-users), product training and service contracts. The Company considers each of these deliverables to be separate units of accounting based on whether the delivered items have stand-alone value. The Company has determined that each unit of accounting has stand-alone value because they are sold separately by the Company or, for hardware products, because the customers can resell them to others on a stand-alone basis.

For the arrangements with multiple deliverables, the Company allocates the arrangement fee to each element based upon the relative selling price of such element. When applying the relative selling price method, the Company determines the selling price for each element using vendor-specific objective evidence (VSOE) of selling price, if it exists, or if not, third-party evidence (TPE) of selling price, if it exists. If neither VSOE nor TPE of selling price exist for an element, the Company uses its best estimated selling price (BESP) for that element. The revenue allocated to each element is then recognized when the basic revenue recognition criteria are met for that element.

The Company is not able to establish a selling price of its deliverables using VSOE or to determine TPE for its products and services. TPE is determined based on competitor prices for similar deliverables when sold separately. Generally, the Company’s go-to-market strategy differs from that of its peers and its offerings contain a significant level of differentiation such that the comparable pricing of products with similar functionality cannot be obtained.

When the Company is unable to establish the selling price of its deliverables using VSOE or TPE, the Company uses BESP in its allocation of arrangement consideration. The objective of BESP is to determine the price at which the Company would transact a sale if the product or service were sold on a stand-alone basis. The Company determines BESP for a product or service by considering multiple factors including, but not limited to, industry and market conditions, competitive landscape, standard pricing practices and internal cost models. Additionally, the

83


 

Company considers historical transactions, including transactions whereby the deliverable was sold on a stand-alone basis.

Deferred revenue primarily relates to support and maintenance and pertains to billings or payments received in advance where all of the revenue recognition criteria have not been met. The current portion of deferred revenue represents the amounts that are expected to be recognized as revenue within one year of the consolidated balance sheet date.

Cost of Revenue

Cost of revenue consists of product and fulfillment costs. Product costs include the cost of systems and disposable kits manufacture, related labor and personnel costs and allocated shared costs. Fulfillment costs consist of costs incurred in the shipping and handling of inventory including the shipping costs to the Company's customers, labor and related personnel costs related to receiving, inspecting, warehousing, and preparing systems and reusable kits for shipment.

Cost of revenue for customer service is expensed as incurred and primarily consists of personnel costs such as salaries, bonuses and benefits and stock‑based compensation for employees associated with service contracts, travel costs and allocated shared costs (including rent and information technology).

Research and Development

Research and development costs are charged to operations as incurred.

Warranty

The Company provides a one-year warranty on the ARTAS System and accrues for the estimated future costs of repair or replacement upon customer acceptance or shipment. The warranty expense is accrued as a liability and recorded to cost of goods sold and is based upon historical information for the cost to repair or replace the system.

Sales Taxes

Revenue is recorded net of taxes collected from customers that are remitted to governmental authorities with the collected taxes recorded as current liabilities in accrued and other liabilities in the accompanying consolidated balance sheets until remitted to the relevant government authority.

Income Taxes

Income taxes are accounted for under the asset and liability method. Deferred tax assets and liabilities are recognized for the future tax consequences attributable to differences between the tax and financial reporting bases of the Company’s assets and liabilities. Deferred tax assets and liabilities are measured using enacted tax rates expected to apply to taxable income in future years in which those temporary differences are expected to be recovered or settled. Deferred tax assets are reduced through the establishment of a valuation allowance, if, based upon available evidence, it is determined that it is more likely than not that the deferred tax assets will not be realized. All deferred tax assets and liabilities are classified as non-current in the consolidated financial statements.

Uncertain Tax Positions

The Company recognizes the effect of income tax positions only if those positions are more likely than not of being sustained on examination based on the technical merit of the position. The first step is to evaluate the tax position for recognition by determining if the weight of available evidence indicates it is more likely than not that the position will be sustained on examination, including resolution of related appeals or litigation processes, if any. The second step is to measure the tax benefit as the largest amount, which is more than 50% likely of being realized upon ultimate settlement.

The Company considers many factors when evaluating and estimating its tax positions and tax benefits, which may require periodic adjustments. The Company recognizes interest charges and penalties related to unrecognized tax benefits as a component of the tax provision.

Stock-Based Compensation

U.S. GAAP requires the measurement and recognition of compensation expense for all share-based payment awards, including stock options, using a fair-value based method. The Company estimates the fair value of share-based

84


 

payment awards on the date of grant using a Black-Scholes-Merton option-pricing model. Stock-ba sed compensation is recognized on a straight-line basis over the requisite service period based on awards ultimately expected to vest. Forfeitures are estimated at the time of grant and revised, if necessary, in subsequent periods if actual forfeitures dif fer from those estimates.

Stock-based awards granted to non-employees are accounted for at fair value. The associated expense is recognized by the Company over the period the services are performed by non-employees. The fair value of stock-based awards granted to non-employees was nominal for the years ended December 31, 2017, 2016 and 2015.

Net Loss Per Share

Prior to the convervsion of all the preferred stock in connection with the IPO, the Company followed a two‑class method when computing net loss per common share as we issue shares that meet the definition of participating securities. The two‑class method determines net income (loss) per common share for each class of common stock and participating securities according to dividends declared or accumulated and participation rights in undistributed earnings. The two‑class method requires income for the period to be allocated between common stock and participating securities based upon their respective rights to receive dividends as if all income for the period had been distributed. Our convertible preferred stock contractually entitles the holders of such shares to participate in dividends, but does not contractually require the holders of such shares to participate in our losses. For periods in which the Company has reported net losses, diluted net loss per common share attributable to common stockholders is the same as basic net loss per common share attributable to common stockholders, because potentially dilutive common shares are not assumed to have been issued if their effect is anti‑dilutive.

Defined Contribution Plan

In 2006, the Company adopted a defined contribution retirement savings plan under Section 401(k) of the Internal Revenue Code (IRC). This plan covers employees who meet minimum age and service requirements and allows participants to defer a portion of their annual compensation on a pre-tax basis. Company contributions to the plan may be made at the discretion of the Board of Directors.

There were no contributions by the Company during the years ended December 31, 2017, 2016 and 2015.

JOBS Act Accounting Election

The Company is an emerging growth company, as defined in the Jumpstart Our Business Startups Act of 2012, or the JOBS Act. Under the JOBS Act, emerging growth companies can delay adopting new or revised accounting standards issued subsequent to the enactment of the JOBS Act until such time as those standards apply to private companies. The Company has elected to use this extended transition period for complying with new or revised accounting standards that have different effective dates for public and private companies until the earlier of the date that it is (i) no longer an emerging growth company or (ii) affirmatively and irrevocably opt out of the extended transition period provided in the JOBS Act. As a result, these consolidated financial statements may not be comparable to companies that comply with the new or revised accounting pronouncements as of public company effective dates.

Recently Issued Accounting Standards

In May 2014, the FASB issued ASU No. 2014‑09, Revenue from Contracts with Customers (Topic 606), as amended by ASU No. 2015-14, ASU No. 2016-08, ASU No. 2016-10, ASU No. 2016-12, and ASU No. 2016-20, collectively, ASU 2014-09. ASU 2014-09 establishes a principle for recognizing revenue upon the transfer of promised goods or services to customers in an amount that reflects the expected consideration received in exchange for those goods or services and also provides guidance on the recognition of costs related to obtaining and fulfilling customer contracts. For public entities, this standard is effective for annual reporting periods beginning after December 15, 2017, including interim periods within that reporting period. For all other entities, this standard is effective for annual reporting periods beginning after December 15, 2018, and interim periods within annual periods beginning after December 15, 2019. Early adoption is permitted. ASU 2014-09 may be adopted either respectively to each prior period presented (full retrospective method) or with the cumulative effect recognized as of the date of initial application (modified retrospective method). The Company expects to adopt this standard effective January 1, 2019 using the modified retrospective adoption method.

The Company’s preliminary assessment of areas to be impacted by the new standard identified possible impact to the deferral of costs to obtain a contract, which are primarily commission expense directly incurred as a result of sales of products and related support, and the allocation of revenue between products and support and maintenance

85


 

for certain arrangements. While the Company continues to assess the potential impact of the new standard, including the areas described above, it has not yet quantified the impact the new standard may have on its consolidated financial statements.

In February 2016, the FASB issued ASU No. 2016‑02, Leases (Topic 842), or ASU 2016‑02, which requires lessees to record most leases on their balance sheets but recognize the expenses on their income statements in a manner similar to current practice. Under ASU 2016‑02, a lessee would recognize a lease liability for the obligation to make lease payments and a right‑to‑use asset for the right to use the underlying asset for the lease term. For public entities, this standard is effective for annual reporting periods beginning after December 15, 2018, including interim periods within that reporting period. For all other entities, this standard is effective for annual reporting periods beginning after December 15, 2019, and interim periods within annual periods beginning after December 15, 2020. Early adoption is permitted. The Company is currently evaluating the impact and materiality that this standard will have on its consolidated financial statements. However, the Company does expect an increase in its consolidated assets and liabilities upon adoption of this standard.

Recently Adopted Accounting Standards

In May 2017, the FASB issued ASU No. 2017-09 (Topic 718) Compensation—Stock Compensation: Scope of Modification Accounting, which provides guidance on the types of changes to the terms or conditions of share-based payment awards to which an entity would be required to apply modification accounting. The new standard is effective on a prospective basis for interim and annual periods beginning after December 15, 2017, with early adoption permitted. The Company early adopted this ASU on a prospective basis in the fourth quarter of fiscal 2017. Prior periods were not retrospectively adjusted. The adoption of the ASU did not have a material impact on the consolidated financial statements.

In November 2016, the FASB issued ASU No. 2016-18 (Topic 230) Statement of Cash Flow: Restricted Cash, which provides guidance on the classification of restricted cash to be included with cash and cash equivalents when reconciling the beginning of period and end of period total amounts on the statement of cash flows. The amendments of this ASU are effective for interim and annual periods beginning after December 15, 2017, with early adoption permitted. The standard must be applied retrospectively to all periods presented. The Company has early adopted this standard in the fourth quarter of fiscal 2017 and the adoption did not have a material impact on its consolidated financial statements.

In August 2016, the FASB issued ASU No. 2016‑15, Statement of Cash Flows (Topic 230): Classification of Certain Cash Receipts and Cash Payments, or ASU 2016‑15. ASU 2016-15 identifies how certain cash receipts and cash payments are presented and classified in the Statement of Cash Flows. For public entities, this standard is effective for annual reporting periods beginning after December 15, 2017, including interim periods within that reporting period. For all other entities, this standard is effective for annual reporting periods beginning after December 15, 2018, and interim periods within annual periods beginning after December 15, 2019. This standard should be applied retrospectively and early adoption is permitted, including adoption in an interim period. The Company has early adopted this standard in the fourth quarter of fiscal 2017 and the adoption did not have a material impact on its consolidated financial statements.

In March 2016, the FASB issued ASU No. 2016‑09, Compensation – Stock Compensation (Topic 718): Improvements to Employee Share‑Based Payment Accounting, or ASU 2016‑09. ASU 2016-09 simplifies the accounting and reporting of share‑based payment transactions, including adjustments to how excess tax benefits and payments for tax withholdings should be classified and provides the election to eliminate the estimate for forfeitures. For public entities, this standard is effective for annual reporting periods beginning after December 15, 2016, including interim periods within that reporting period. For all other entities, this standard is effective for annual reporting periods beginning after December 15, 2017, and interim periods within annual periods beginning after December 15, 2018. Early adoption is permitted for any entity in any interim or annual period for which financial statements have not been issued or made available for issuance. The Company early adopted this ASU on a prospective basis in the fourth quarter of fiscal 2017. Prior periods were not retrospectively adjusted. The adoption of the ASU did not have a material impact on the consolidated financial statements.

In July 2015, the FASB issued ASU No. 2015-11, Inventory, Simplifying the Measurement of Inventory (Topic 330), or ASU 2015-11. Under ASU 2015-11, the measurement principle for inventory will change from lower of cost or market value to lower of cost and net realizable value. Net realizable value is the estimated selling price in the ordinary course of business, less reasonably predictable costs of completion, disposal and transportation. For public entities, this standard is effective for annual reporting periods beginning after December 15, 2016, including interim periods within that reporting period. For all other entities, this standard is effective for annual reporting

86


 

periods beginning after December 15, 2016, and interim periods within annual periods beginning after December 15, 2017. This standard should be applied prospectively and early adoption is permitted. The Company adopted this ASU on a prospective basis in the fourth quarter of fiscal 2017. Prior periods were not retrospectively adjusted. The adoption of the ASU did not have a material impact on the consolidated financial statements.

3. NET LOSS PER SHARE

Net Loss Per Share

Basic net loss per share is calculated by dividing net loss by the weighted-average number of common shares outstanding during the period, without consideration for common stock equivalents. Diluted net loss per share is computed by dividing net loss by the weighted-average number of common share equivalents outstanding for the period determined using the treasury-stock method. For purposes of this calculation, convertible preferred stock, preferred stock warrants and stock options are considered to be common stock equivalents and are only included in the calculation of diluted net loss per share when their effect is dilutive.

Due to the net loss, all the outstanding shares of common stock equivalents were excluded from the calculation of diluted net loss per share attributable to common stockholders for the periods presented because including them would have been antidilutive:

 

 

 

As of December 31,

 

 

 

2017

 

 

2016

 

 

2015

 

Options to purchase common stock

 

 

1,930,752

 

 

 

1,831,757

 

 

 

1,410,708

 

Convertible preferred stock

 

 

 

 

 

21,142,295

 

 

 

19,336,777

 

Warrants for preferred stock

 

 

 

 

 

385,126

 

 

 

385,126

 

Warrants for common stock

 

 

306,456

 

 

 

 

 

 

 

Total potential dilutive shares

 

 

2,237,208

 

 

 

23,359,178

 

 

 

21,132,611

 

 

4. FAIR VALUE MEASUREMENTS

Cash and cash equivalents, restricted cash, accounts receivable, accounts payable, and accrued liabilities approximate fair market value because of the short-term nature of those instruments. Management believes that the long-term note bearing variable interest represents the prevailing market rates for instruments with similar characteristics; accordingly, the carrying value of this instrument approximates its fair value.

U.S. GAAP established a framework for measuring fair value and a fair value hierarchy based on the inputs used to measure fair value. This framework maximizes the use of observable inputs and minimizes the use of unobservable inputs by requiring that the observable inputs be used when available. Fair value is defined as the price that would be received to sell an asset or paid to transfer a liability in an orderly transaction between market participants at the measurement date. It applies to both items recognized and reported at fair value in the consolidated financial statements and items disclosed at fair value in the notes to the consolidated financial statements.

Observable inputs are inputs that market participants would use in pricing the asset or liability based on market data obtained from independent sources. Unobservable inputs reflect assumptions that market participants would use in pricing the asset or liability based on the best information available in the circumstances. The hierarchy is broken down into three levels based on the transparency of inputs as follows:

Level 1 - Quoted prices are available in active markets for identical assets or liabilities as of the report date. A quoted price for an identical asset or liability in an active market provides the most reliable fair value measurement because it is directly observable to the market.

Level 2 - Pricing inputs are other than quoted prices in active markets, which are either directly or indirectly observable as of the report date. The nature of these securities include investments for which quoted prices are available but traded less frequently and investments that are fair valued using other securities, the parameters of which can be directly observed.

Level 3 - Securities that have little to no pricing observability as of the report date. These securities are measured using management’s best estimate of fair value, where the inputs into the determination of fair value are not observable and require significant management judgment or estimation.

87


 

A financial instrument’s level within the fair value hierarchy is based on the lowest level of any input that is significant to the fair value measurement. However, the determination of what constitutes “observable” requires significant judgment by the Com pany. The categorization of a financial instrument within the hierarchy is based upon the pricing transparency of the instrument and does not necessarily correspond to the Company’s perceived risk of that instrument. The following tables summarize the leve ls of fair value measurements of the Company’s cash equivalents, investments and preferred stock warrants liabilities:

 

 

 

Fair Value Measurements as of December 31, 2017

 

 

 

Quoted

Prices in

Active

Markets

using

Identical

Assets

(Level 1)

 

 

Significant

Other

Observable

Inputs

(Level 2)

 

 

Significant

Unobservable

Inputs

(Level 3)

 

 

Total

 

Assets

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Cash Equivalents:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Money market accounts

 

$

23,545

 

 

$

 

 

$

 

 

$

23,545

 

Restricted cash

 

 

100

 

 

 

 

 

 

 

 

 

100

 

Total assets

 

$

23,645

 

 

$

 

 

$

 

 

$

23,645

 

 

 

 

Fair Value Measurements as of December 31, 2016

 

 

 

Quoted

Prices in

Active

Markets

using

Identical

Assets

(Level 1)

 

 

Significant

Other

Observable

Inputs

(Level 2)

 

 

Significant

Unobservable

Inputs

(Level 3)

 

 

Total

 

Assets

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Cash Equivalents:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Money market accounts

 

$

11,906

 

 

$

 

 

$

 

 

$

11,906

 

Restricted cash

 

 

100

 

 

 

 

 

 

 

 

 

100

 

Total assets

 

$

12,006

 

 

$

 

 

$

 

 

$

12,006

 

Liabilities

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Preferred stock warrant liabilities

 

$

 

 

$

 

 

$

693

 

 

$

693

 

 

88


 

The following table summarizes the preferred stock warrant liabilities activity subject to Level 3 inputs which are measured on a recurring basis until their exercises:

 

 

 

Fair value

measurements

of

warrants using

significant

unobservable

inputs

(Level 3)

 

Balance as of January 1, 2015

 

$

659

 

Change in fair value of preferred stock warrants

 

 

(578

)

Fair value of preferred stock warrants issued

 

 

266

 

Balance as of December 31, 2015

 

 

347

 

Change in fair value of preferred stock warrants

 

 

346

 

Balance as of December 31, 2016

 

 

693

 

Change in fair value of preferred stock warrants

 

 

387

 

Fair value of preferred stock warrants converted to common

   stock warrants

 

 

(1,080

)

Balance as of December 31, 2017

 

$

 

 

5. BALANCE SHEET COMPONENTS

Inventory

Inventory consists of the following:

 

 

 

December 31,

 

 

 

2017

 

 

2016

 

Finished goods

 

$

2,761

 

 

$

2,580

 

Raw materials

 

 

 

 

 

162

 

Total inventory

 

$

2,761

 

 

$

2,742

 

 

Property and Equipment, Net

Property and equipment, net consist of the following:

 

 

 

December 31,

 

 

 

2017

 

 

2016

 

Computer hardware and software

 

$

721

 

 

$

647

 

Equipment

 

 

2,929

 

 

 

2,818

 

Leasehold improvements

 

 

869

 

 

 

1,094

 

Furniture and fixtures

 

 

270

 

 

 

82

 

Total property and equipment

 

 

4,789

 

 

 

4,641

 

Less: Accumulated depreciation and amortization

 

 

(3,651

)

 

 

(3,182

)

Total property and equipment, net

 

$

1,138

 

 

$

1,459

 

 

Depreciation and amortization expense was $574, $654, $860 for the years ended December 31, 2017, 2016 and 2015.

89


 

Accrued and Other Liabilities

Accrued and other liabilities consist of the following:

 

 

 

December 31,

 

 

 

2017

 

 

2016

 

Payroll and related expense

 

$

1,630

 

 

$

1,647

 

Other*

 

 

1,125

 

 

 

791

 

Total accrued and other liabilities

 

$

2,755

 

 

$

2,438

 

 

 

*

Other consists of items that are individually less than 5% of total current liabilities.

6. COMMITMENTS AND CONTINGENCIES

Operating Leases

The Company has various operating leases including 23,000 square feet of office space in San Jose, California, which expires in April 2022.

The Company recognizes rent expense on a straight-line basis over the non-cancelable lease period and records the difference between cash rent payments and the recognition of rent expense as a deferred rent liability. When leases contain escalation clauses, rent abatements and/or concessions, such as rent holidays and landlord or tenant incentives or allowances, the Company applies them in the determination of straight-line rent expense over the lease period.

Aggregate future minimum lease payments required under the Company’s operating leases as of December 31, 2017 are as follows:

 

Years ending December 31,

 

 

 

 

2018

 

$

503

 

2019

 

 

518

 

2020

 

 

534

 

2021

 

 

550

 

Thereafter

 

 

188

 

Total future minimum lease payments

 

$

2,293

 

 

The total rent expense for all operating leases for the years ended December 31, 2017, 2016 and 2015 was $413, $315, and $322.

Licensing Agreements

In July 2006, the Company entered into a license agreement with Rassman Licensing, LLC (Rassman) for non-exclusive, royalty bearing, non-transferable, perpetual, world-wide rights for use on approved fields relating to robotically controlled hair removal and implantation procedures. In consideration for this license, the Company paid Rassman a one-time payment of $1,000. The agreement terminates on May 9, 2020. In February 2012, the Company amended its license agreement with Rassman. In exchange for a one-time $400 payment to Rassman, the Company now has a fully paid royalty-free license to a patent subject to this license agreement. Royalties for the years ended December 31, 2017, 2016 and 2015 were $0.

In July 2006, the Company entered into a license agreement with HSC Development, LLC for exclusive non-transferable, royalty-free worldwide rights for use in approved fields relating to a computer-controlled system in which a device is carried on a mechanized arm for extraction or implantation of a follicular unit without manual manipulation. In consideration for this license, the Company paid HSC Development, LLC a one-time payment of $25 and issued 2,500 shares of the Company’s common stock valued.  The agreement terminates on July 27, 2024.

7. LONG-TERM DEBT

Loan and Security Agreement

In May 2015, the Company entered into a loan and security agreement with Oxford Finance, LLC, or Oxford, (the Agreement). Under the terms of the loan and security agreement, the Company borrowed $20,000 with an interest

90


 

rate at prime plus 8.5% per annum, which is collateralized by all personal property of the Company excluding intellectual property, and issued 10-year warrants to purchase 110,486 shares of Series C Preferred Stock at $7.15 per share. The estimated fair value of the warrants at issuance was recorded as a discount on the loan and amortized into interest expense ov er the expected life of the loan. In connection with the loan agreement, the Company recorded $246 of credit facility fees and $153 of debt issuance cost as of January 31, 2015. The credit facility fees and debt issuance costs are a discount on the debt an d are being amortized to interest expense over the term of the loan using the effective-interest method. The loan will mature in July 2019, at which time the Company must repay the outstanding principal balance which includes a final payment of $1,300. The outstanding principal balance on the loan was $13,300 and accrued interest totaled $85 as of December 31, 2017. The interest rate was 13% at December 31, 2017.

Borrowings under the Agreement are collateralized by all the assets of the Company excluding intellectual property. The Agreement includes customary restrictive covenants that impose operating and financial restrictions on the Company, including restrictions on our ability to take actions that could be in the Company’s best interests. These restrictive covenants include operating covenants restricting, among other things, the Company’s ability to incur additional indebtedness, effect certain acquisitions or make other fundamental changes. The Company was in compliance with all of the covenants as of December 31, 2017 and 2016.

The scheduled principal payments on the outstanding borrowings as of December 31, 2017 are as follows:

 

 

 

As of December 31, 2017

 

2018

 

$

8,000

 

2019

 

 

5,300

 

Total

 

 

13,300

 

Less debt discount

 

 

(299

)

Less current portion

 

 

(7,730

)

Non-current portion

 

$

5,271

 

 

For the year ended December 31, 2017 and 2016, the Company made principal repayments of $8,000 and $0.

Convertible Notes

On September 6, 2017, the Company issued $5,000 in subordinated convertible notes (Convertible Notes) that accrued interest at 5.0% per annum, in a private placement transaction with certain of the Company’s existing stockholders and their affiliated entities, including investors affiliated with certain of the Company’s directors.

Pursuant to the terms of the Convertible Notes, the aggregate outstanding principal and unpaid but accrued interest automatically converted into 718,184 shares of the Company’s common stock, upon the consummation of the IPO. There was no outstanding balance on the Convertible Notes as of December 31, 2017.

8. PREFERRED STOCK

As of December 31, 2017, the Company had 10,000,000 shares of preferred stock authorized with a par value of $0.0001. No shares of preferred stock were outstanding as of December 31, 2017.

Convertible Preferred Stock

During the year ended December 31, 2017, the Company issued an aggregate of 1,529,306 shares of Series C convertible preferred stock for net cash proceeds of $10,209, net of issuance cost of $726.

Upon the closing of the IPO (as discussed in Note 1), all outstanding shares of Series A, Series AA, Series B and Series C convertible preferred stock converted into 22,671,601 shares of common stock.

During the year ended December 31, 2016, the Company issued an aggregate of 1,805,518 shares of Series C convertible preferred stock for net cash proceeds of $12,073, net of issuance cost of $837.

91


 

The convertible preferred stock as of December 31, 2016 consisted of the f ollowing:

 

 

 

December 31, 2016

 

Convertible Preferred Stock:

 

Shares

Authorized

 

 

Shares Outstanding

 

 

Net Carrying

Value

 

 

Liquidation Preference

 

Series A

 

 

25,092,906

 

 

 

2,509,232

 

 

$

11,140

 

 

$

11,292

 

Series B

 

 

38,461,538

 

 

 

3,846,132

 

 

 

24,926

 

 

 

25,000

 

Series C

 

 

170,100,000

 

 

 

14,536,931

 

 

 

97,693

 

 

 

103,939

 

Series AA

 

 

2,500,000

 

 

 

250,000

 

 

 

1,976

 

 

 

2,000

 

Total convertible preferred stock

 

 

236,154,444

 

 

 

21,142,295

 

 

$

135,735

 

 

$

142,231

 

 

On issuance, the Company’s convertible preferred stock was recorded at fair value or the amount of allocated proceeds, net of issuance costs.

The Company’s convertible preferred stock was classified outside of stockholders’ equity (deficit) from issuance through the closing of the IPO, because, in the event of certain “liquidation events” that are not solely within the Company’s control (including merger, acquisition, or sale of all or substantially all of the Company’s assets), the shares would have become redeemable at the option of the holders. The Company did not adjust the carrying values of the convertible preferred stock to the deemed liquidation values of such shares since a liquidation event was not probable at any of the reporting dates.

9. PREFERRED AND COMMON STOCK WARRANTS

As of December 31, 2016, the preferred stock warrants consisted of the following:

 

 

 

Warrants Outstanding December 31, 2016

 

 

Exercise

Price

 

 

Expiration

Series C preferred stock warrants

 

 

274,640

 

 

$

7.15

 

 

Various dates in

2023 - 2024

Series C preferred stock warrants

 

 

110,486

 

 

 

7.15

 

 

May 19, 2025

Total preferred stock warrants

 

 

385,126

 

 

 

 

 

 

 

 

There was no change in the total preferred stock warrants balance from January 1, 2017 to immediately prior to the closing of the IPO.

 

On the closing of the IPO, all outstanding convertible preferred stock warrants automatically converted into common stock warrants.  As such, the Company reclassified the outstanding preferred stock warrant liability to additional paid in capital in stockholder’s equity (deficit).  During the year ended, December 31, 2017, a total of 78,670 of common stock warrants were net exercised for 15,112 shares of common stock. As of December 31, 2017, there were 306,456 common stock warrants outstanding exercisable into the same number of shares of common stock at an exercise price of $7.15 with expiration dates ranging from 2018 to 2025.

92


 

From January 1, 2017 through September 30, 2017, the Company estimated the fair value of each preferred stock warrant using a prob ability weighed expected return method (PWERM) that uses an option pricing method (OPM), together with a Monte Carlo simulation to incorporate the anti-dilution provisions on the convertible preferred stock, to allocate the estimated value of the Company. The OPM treated classes of stock as call options on a company's enterprise value which took into consideration differences in the right of various securities including rights to dividends, liquidation preferences, and conversion rights. The OPM priced the call option using the Black-Scholes model. The PWERM relied on a forward-looking analysis to predict the possible future value of a company by weighing discrete future outcomes. The fair value of preferred stock warrants was determined using the following assumptions:

 

 

 

Year Ended

December 31

 

 

 

2016

 

Expected term (years)

 

 

2.00

 

Risk-free interest rate

 

 

1.20

%

Expected volatility

 

 

70.90

%

 

The estimated expected volatility was derived from historical volatilities of several unrelated publicly listed peer companies over a period approximately equal to the remaining term of the warrants. When making the selections of the Company’s industry peer companies to be used in the volatility calculation, the Company considered the size and operational and economic similarities to the Company’s principle business operations. The estimated expected term represented either the lesser of (i) the remaining contractual term of the warrants or (ii) the remaining term under probable scenarios used to determine the fair value of the underlying stock. The risk-free interest rate was based on the U.S. Treasury yield for a term consistent with the estimated expected term. The significant unobservable inputs used in the fair value measurement of the convertible preferred stock warrant liability were the fair value of the underlying stock at the valuation date, the expected volatility, and the estimated term of the warrants.

On the closing of the IPO, the Company remeasured the preferred stock warrant liability to fair value of $1,080 before the warrant liability converted into additional paid-in-capital. The Company estimated the fair value of the preferred stock warrant liability using the Black-Scholes-Merton option pricing model, based on the following assumptions:

 

Expected term (years)

 

1.00-7.61

Risk-free interest rate

 

1.31-2.16%

Expected volatility

 

72%

 

93


 

10. COMMON STOCK RESERVED FOR ISSUANCE

The Company is required to reserve and keep available out of its authorized but unissued shares of common stock a number of shares sufficient to effect the conversion of all outstanding shares of convertible preferred stock (and preferred stock warrants), plus options granted and available for grant under the incentive plans.

 

 

 

December 31,

2017

 

 

December 31,

2016

 

Conversion of outstanding Series A convertible

   preferred stock

 

 

 

 

 

2,509,232

 

Conversion of outstanding Series B convertible

   preferred stock

 

 

 

 

 

3,846,132

 

Conversion of outstanding Series C convertible

   preferred stock

 

 

 

 

 

14,536,931

 

Conversion of outstanding Series AA convertible

   preferred stock

 

 

 

 

 

250,000

 

Outstanding preferred stock warrants

 

 

 

 

 

385,126

 

Outstanding common stock warrants

 

 

306,456

 

 

 

 

Outstanding and issued stock options

 

 

1,930,752

 

 

 

1,831,757

 

Shares reserved for future option grants

 

 

271,490

 

 

 

392,306

 

Total common stock reserved for issuance

 

 

2,508,698

 

 

 

23,751,484

 

 

11. STOCK OPTION PLAN

2017 Plan

The 2017 Equity Incentive Plan (2017 Plan) became effective on October 11, 2017. Under the 2017 Plan, 1,913,831 shares of common stock were initially reserved for the grant of incentive stock options (ISOs), nonstatutory stock options (NSOs), stock appreciation rights, restricted stock awards, restricted stock unit awards, and other forms of equity compensation to employees, directors and consultants. In addition, the Company’s 2017 Plan provides for the grant of performance cash awards to employees, directors and consultants. Prior to the 2017 Plan, 306,756 shares that had been available for future awards under 2015 Plan (defined below) as of October 11, 2017, were added to the initial reserve available under 2017 Plan, bringing the total number of shares reserved for issuance under the 2017 Plan upon effective date to 2,220,587 shares. The number of shares reserved for issuance under the 2017 Plan will increase automatically on the first day of each fiscal year beginning in 2018 and ending in 2027, equal to the lesser of (i) 4% of the shares of stock outstanding on the last day of the immediately preceding fiscal year or (ii) number of shares of stock as determined by the Company’s board of directors.

2005 and 2015 Plan

The Company granted options under 2015 Equity Incentive Plan (the 2015 Plan) and 2005 Stock Option Plan (the 2005 Plan) until October 2017 when they were terminated as to future awards, although they continue to govern the terms of options that remain outstanding under the 2005 Plan and the 2015 Plan, as the case may be. The 2005 Plan provided for the granting of ISOs and NSOs. In 2015, the Company established its 2015 Plan, which superseded and replaced the 2005 Plan. In connection with the Board of Directors approval of the 2017 Plan, all remaining shares available for future award under the 2015 Plan were transferred to the 2017 Plan, and the 2015 Plan was terminated.

The Company recognized stock-based compensation for its employees and non-employees in the accompanying consolidated statements of operations as follows:

 

 

 

Year Ended December 31,

 

 

 

2017

 

 

2016

 

 

2015

 

Cost of revenue

 

$

10

 

 

$

12

 

 

$

12

 

Research and development

 

 

101

 

 

 

102

 

 

 

116

 

Sales and marketing

 

 

74

 

 

 

85

 

 

 

140

 

General and administrative

 

 

280

 

 

 

267

 

 

 

161

 

Total stock-based compensation

 

$

465

 

 

$

466

 

 

$

429

 

 

94


 

Determination of Fair Value

The estimated grant-date fair value of all of the Company’s stock-based awards was calculated using the Black-Scholes-Merton option pricing model, based on the following assumptions:

 

 

 

Year Ended December 31,

 

 

2017

 

2016

 

2015

Expected term (in years)

 

4.95-7.50

 

5.53–6.11

 

5.00 – 6.07

Risk-free interest rate

 

1.77-2.13%

 

1.30–1.84%

 

1.47– 1.82%

Expected volatility

 

51.62-55.38%

 

52.71–56.58%

 

51.93-58.21%

Expected dividend rate

 

0%

 

0%

 

0%

 

The fair value of each stock option grant was determined by the Company using the methods and assumptions discussed below. Each of these inputs is subjective and generally requires significant judgment and estimation by management.

Expected Term —The expected term represents the period that stock-based awards are expected to be outstanding. The expected term for option grants is determined using the simplified method. The simplified method deems the term to be the average of the time-to-vesting and the contractual life of the stock-based awards. The expected term for options issued to non-employees is the contractual term.

Expected Volatility —Since the Company does not have a trading history for its common stock, the expected volatility was derived from the historical stock volatilities of comparable peer public companies within its industry that are considered to be comparable to the Company’s business over a period equivalent to the expected term of the stock-based awards.

Risk-Free Interest Rate —The risk-free interest rate is based on the U.S. Treasury yield curve in effect at the date of grant for zero-coupon U.S. Treasury notes with maturities approximately equal to the stock-based awards’ expected term.

Expected Dividend Rate —The expected dividend is zero as the Company has not paid nor does it anticipate paying any dividends on its common stock in the foreseeable future.

Forfeiture Rate —The forfeiture rate is estimated based on an analysis of actual forfeitures. Management will continue to evaluate the adequacy of the forfeiture rate based on actual forfeiture experience, analysis of employee turnover behavior and other factors. The impact from any forfeiture rate adjustment would be recognized in full in the period of adjustment and if the actual number of future forfeitures differs from management’s estimates, the Company might be required to record adjustments to stock-based compensation in future periods.

Fair Value of Common Stock —Prior to the closing of the Company’s IPO, the fair value of the Company’s common stock was determined by the Company’s board of directors because there was no public market for the Company’s common stock as the Company was a private company.  The Company’s board of directors determined the fair value of the common stock by considering a number of objective and subjective factors, including having valuations of its common stock performed by an unrelated valuation specialist, valuations of comparable peer public companies, sales of the Company’s convertible preferred stock to unrelated third parties, operating and financial performance, the lack of liquidity of the Company’s capital stock, and general and industry-specific economic outlook. After the closing of the Company’s IPO, the fair value of the Company’s common stock is used to estimate the fair value of the stock-based awards at grant date.

95


 

The following table summarizes stock option activity under the Company’s stock option plan:

 

 

 

Number of

Shares

 

 

Weighted-

Average

Exercise

Price per

Share

 

 

Weighted-

Average

Remaining

Contractual

Term

 

 

Aggregate

Intrinsic

Value

 

Outstanding – January 1, 2015

 

 

1,258,429

 

 

$

1.80

 

 

 

 

 

 

 

 

 

Options granted

 

 

532,930

 

 

 

1.80

 

 

 

 

 

 

 

 

 

Options exercised

 

 

(79,893

)

 

 

1.40

 

 

 

 

 

 

 

 

 

Options cancelled

 

 

(294,654

)

 

 

1.40

 

 

 

 

 

 

 

 

 

Options expired

 

 

(6,104

)

 

 

2.30

 

 

 

 

 

 

 

 

 

Outstanding – December 31, 2015

 

 

1,410,708

 

 

 

1.90

 

 

 

7.9

 

 

$

 

Options granted

 

 

1,179,644

 

 

 

1.70

 

 

 

 

 

 

 

 

 

Options exercised

 

 

(20,218

)

 

 

2.00

 

 

 

 

 

 

 

 

 

Options cancelled

 

 

(737,377

)

 

 

2.00

 

 

 

 

 

 

 

 

 

Options expired

 

 

(1,000

)

 

 

0.50

 

 

 

 

 

 

 

 

 

Outstanding – December 31, 2016

 

 

1,831,757

 

 

 

1.80

 

 

 

8.7

 

 

$

14

 

Options granted

 

 

192,420

 

 

 

3.12

 

 

 

 

 

 

 

 

 

Options exercised

 

 

(21,843

)

 

 

2.01

 

 

 

 

 

 

 

 

 

Options cancelled

 

 

(71,582

)

 

 

1.81

 

 

 

 

 

 

 

 

 

Outstanding – December 31, 2017

 

 

1,930,752

 

 

$

1.90

 

 

 

7.9

 

 

$

5,322

 

Vested and expected to vest – December 31, 2017

 

 

1,667,332

 

 

$

1.90

 

 

 

7.8

 

 

$

4,590

 

Exercisable – December 31, 2017

 

 

960,933

 

 

$

1.80

 

 

 

7.2

 

 

$

3,257

 

 

The weighted-average grant date fair value of options granted was $1.73, $0.86 and $1.10 per share for years ended December 31, 2017, 2016 and 2015.

The total intrinsic value of options exercised were $1.18, $0 and $47 for years ended December 31, 2017, 2016 and 2015.

Unamortized stock-based compensation was $722 as of December 31, 2017, which is expected to be recognized over a weighted-average period of approximately 2.63 years.

12. INCOME TAXES

The geographical breakdown of loss before provision for income taxes is as follows:

 

 

 

Year Ended December 31,

 

 

 

2017

 

 

2016

 

 

2015

 

Domestic

 

$

(17,732

)

 

$

(21,696

)

 

$

(22,535

)

Foreign

 

 

(54

)

 

 

(150

)

 

 

(436

)

Net loss before provision for income taxes

 

$

(17,786

)

 

$

(21,846

)

 

$

(22,971

)

 

96


 

The components of the provision for income taxes are as follows:

 

 

 

Year Ended December 31,

 

 

 

2017

 

 

2016

 

 

2015

 

Current tax provision:

 

 

 

 

 

 

 

 

 

 

 

 

Federal

 

$

 

 

$

 

 

$

 

State

 

 

4

 

 

 

4

 

 

 

4

 

Foreign

 

 

56

 

 

 

16

 

 

 

17

 

Total current tax provision

 

 

60

 

 

 

20

 

 

 

21

 

Deferred tax provision (benefit):

 

 

 

 

 

 

 

 

 

 

 

 

State

 

 

(4

)

 

 

(4

)

 

 

(4

)

Foreign

 

 

 

 

 

(16

)

 

 

(17

)

Total deferred tax provision (benefit)

 

$

(4

)

 

$

(20

)

 

$

(21

)

Total provision for income taxes

 

$

56

 

 

$

 

 

$

 

 

Deferred income taxes reflect the net tax effects of temporary differences between the carrying amounts of assets and liabilities for financial reporting purposes and the amounts used for income tax purposes.

 

A valuation allowance is provided when it is more likely than not that the deferred tax assets will not be realized. The Company has established a valuation allowance to offset net deferred tax assets for all periods presented due to the uncertainty of realizing future tax benefits from net operating loss carryforwards and other deferred tax assets. The valuation allowance decreased by $13,888 and increased by $7,634 for the years ended December 31, 2017 and 2016. The decrease in valuation allowance in 2017 was due to the change in the corporate tax rate from 35% to 21% and the resulting revaluation of the deferred tax assets.

On December 22, 2017, the Tax Cuts and Jobs Act (the "Act") was enacted into law making significant changes to the Internal Revenue Code. Changes include, but are not limited to, a federal corporate tax rate decrease from 35% to 21% for tax years beginning after December 31, 2017, the transition of U.S. international taxation from a worldwide tax system to a territorial system and a one-time transition tax on the mandatory deemed repatriation of foreign earnings. ASC 740 requires the Company to recognize the effect of the tax law changes in the period of enactment. However, the SEC staff has issued SAB 118 which will allow the Company to record provisional amounts during a measurement period.

The Company has concluded that a reasonable estimate could be developed for the effects of the tax reform. However, due to the short time frame between the enactment of the reform and the year end, its fundamental changes, the accounting complexity, and the expected ongoing guidance and accounting interpretations over the next 12 months, the Company considers the accounting of the deferred tax remeasurement and other items to be reasonable estimates. These effects have been included in the consolidated financial statements for the year ended December 31, 2017 as provisional amounts, which had no effect on the benefit from taxes on income due to the valuation allowance.

During the measurement period, the Company might need to reflect adjustments to the provisional amounts upon obtaining, preparing, or analyzing additional information about facts and circumstances that existed as of the enactment date that, if known, would have affected the income tax effects initially reported as provisional amounts. The measurement period will end when the Company obtains, prepares, and analyzes the information needed in order to complete the accounting requirements under ASC Topic 740 or on December 22, 2018, whichever is earlier. The Company expects to complete its analysis within the measurement period in accordance with SAB 118.

 

97


 

Our effective tax rate substantially differed from the federal statutory tax rate of 34% primarily due to the change in the valuation allowance for our deferred tax assets. The reconciliation between income taxes computed at the federal statutory income tax rate and the provision for income taxes is as follows:

 

 

 

Year Ended December 31,

 

 

 

2017

 

 

2016

 

 

2015

 

U.S. federal statutory income tax at 34%

 

$

(6,046

)

 

$

(7,306

)

 

$

(7,973

)

Research tax credits

 

 

(75

)

 

 

(99

)

 

 

(82

)

Stock-based compensation

 

 

85

 

 

 

102

 

 

 

125

 

Adjustment of deferred tax balances following

   changes in tax rates

 

 

20,748

 

 

 

 

 

 

 

Other

 

 

303

 

 

 

117

 

 

 

599

 

Change in valuation allowance

 

 

(14,955

)

 

 

7,206

 

 

 

7,352

 

Total current tax provision

 

 

60

 

 

 

20

 

 

 

21

 

Total deferred tax benefit

 

 

(4

)

 

 

(20

)

 

 

(21

)

Total provision for income taxes

 

$

56

 

 

$

 

 

$

 

 

The components of the deferred tax assets are as follows:

 

 

 

December 31,

 

 

 

2017

 

 

2016

 

Deferred tax assets:

 

 

 

 

 

 

 

 

Net operating loss carryforwards

 

$

37,173

 

 

$

51,104

 

Research and development credits

 

 

2,823

 

 

 

2,456

 

Accrual and reserves

 

 

1,251

 

 

 

1,575

 

Total deferred tax assets

 

 

41,247

 

 

 

55,135

 

Less: valuation allowance

 

 

(41,247

)

 

 

(55,135

)

Total net deferred tax assets

 

$

 

 

$

 

 

As of December 31, 2017, the Company has federal and state net operating loss (“NOL) carryforwards of approximately $154,250 and $96,696. The use of these NOL carryforwards might be subject to limitation under the rules regarding a change in stock ownership as determined by the IRC and similar state provisions (the “Code”); however, a complete analysis of the limitation of the NOL carryforwards will not be complete until the time the Company projects it will be able to utilize such NOLs. The NOL carryforwards expire between 2018 and 2037, and valuation allowances have been reserved, where necessary. In addition, as of December 31, 2017, the Company also had NOL carryforwards in South Korea of approximately $1,102 which begin to expire in 2025.

The Company also had federal and state research and development credit carryforwards of approximately $1,490 and $1,687, as of December 31, 2017. The federal credit will expire starting in 2025 if not utilized. The state credits have no expiration date.

Utilization of the research and development credit carryforwards may be subject to an annual limitation due to the ownership percentage change limitations provided by the Code. However, the Company has not conducted a formal study to determine the extent of the limitations, which could impact the realizability of these credit carryforwards in future periods. The annual limitations may result in the expiration of the net operating losses and research and development credits before utilization.

The Company has not provided for U.S. income taxes on undistributed earnings of its foreign subsidiaries because it intends to permanently re-invest these earnings outside the U.S. The cumulative amount of such undistributed earnings upon which no U.S. income taxes have been provided was $122 as of December 31, 2017. It is not practicable to determine the income tax liability that might be incurred if these earnings were to be repatriated to the U.S.

 

98


 

Uncertain Tax Positions

The activity related to the gross amount of unrecognized tax benefits is as follows:

 

 

 

Year Ended December 31,

 

 

 

2017

 

 

2016

 

Balance as of the beginning of the year

 

$

1,283

 

 

$

1,186

 

Increases related to tax positions in prior period

 

 

5

 

 

 

16

 

Increases related to tax positions taken during the

   current period

 

 

74

 

 

 

81

 

Balance at the end of the year

 

$

1,362

 

 

$

1,283

 

 

These amounts are related to certain deferred tax assets with a corresponding valuation allowance. If recognized, the impact on the Company’s effective tax rate would not be material due to the full valuation allowance. Management believes that there will not be any significant changes in our unrecognized tax benefits in the next 12 months.

The Company recognizes interest and penalties related to unrecognized tax benefits in the provision for income taxes in the accompanying consolidated statement of operations. Accrued interest and penalties, if applicable, are included in accrued liabilities in the consolidated balance sheet. For the years ended December 31, 2017, 2016 and 2015, the Company did not recognize any accrued interest and penalties.

The Company files income tax returns in the United States and in various state jurisdictions with va rying statutes of limitations. Tax years 2002 through 2017 remain open to examination by the United States and various state jurisdictions. The Company is not currently under examination by the Internal Revenue Service or any other jurisdiction for any year.

13. GEOGRAPHIC INFORMATION

The following table reflects revenue by geographic area by customer location:

 

 

 

Year Ended December 31,

 

 

 

2017

 

 

2016

 

 

2015

 

United States

 

$

8,919

 

 

$

6,736

 

 

$

8,252

 

Europe and Middle East

 

 

5,784

 

 

 

3,112

 

 

 

2,940

 

Asia Pacific

 

 

4,353

 

 

 

3,552

 

 

 

2,989

 

Rest of World

 

 

2,241

 

 

 

2,200

 

 

 

3,049

 

Total revenue

 

$

21,297

 

 

$

15,600

 

 

$

17,230

 

 

As of December 31, 2017 and 2016, all long-term assets were located within the United States.

14. SELECTED QUARTERLY FINANCIAL DATA

The following tables present certain selected unaudited consolidated quarterly financial information for each of the eight quarters ended December 31, 2017. This consolidated quarterly information has been prepared on the same basis as the consolidated financial statements and includes all adjustments necessary to state fairly the information for the periods presented. The selected consolidated quarterly financial results from operations for the years ended December 31, 2017 and 2016 are set forth therein. Net loss per share for all periods presented has been retroactively adjusted to reflect the 1-for-10 reverse stock split effected on September 15, 2017.

 

 

 

Fiscal 2017 Quarter Ended,

 

 

 

March 31,

2017

Unaudited

 

 

June 30,

2017

Unaudited

 

 

September 30,

2017

Unaudited

 

 

December 31,

2017

Unaudited

 

Revenue, net

 

$

5,475

 

 

$

5,789

 

 

$

4,177

 

 

$

5,856

 

Gross profit

 

$

2,383

 

 

$

2,302

 

 

$

1,703

 

 

$

2,759

 

Net loss

 

$

(5,175

)

 

$

(5,007

)

 

$

(6,596

)

 

$

(1,064

)

Basic and diluted net loss per share

 

$

(3.20

)

 

$

(3.09

)

 

$

(4.07

)

 

$

(0.04

)

 

99


 

 

 

Fiscal 2016 Quarter Ended,

 

 

 

March 31,

2016

Unaudited

 

 

June 30,

2016

Unaudited

 

 

September 30,

2016

Unaudited

 

 

December 31,

2016

Unaudited

 

Revenue, net

 

$

3,187

 

 

$

3,559

 

 

$

3,676

 

 

$

5,178

 

Gross profit

 

$

779

 

 

$

1,104

 

 

$

1,272

 

 

$

2,014

 

Net loss

 

$

(5,814

)

 

$

(5,172

)

 

$

(5,928

)

 

$

(4,932

)

Basic and diluted net loss per share

 

$

(3.61

)

 

$

(3.21

)

 

$

(3.67

)

 

$

(3.06

)

 

15. RELATED PARTY TRANSACTIONS

During the years ended December 31, 2017 and 2016, the Company has engaged in a commercial transaction with a then-member of the Company’s board of directors. The aggregate revenue for this transaction was $83 and $240 for the years ended December 31, 2017 and 2016. There were no accounts receivable due from this then-member of the board of directors as of December 31, 2017 and 2016. In January 2017, that member of the Company’s board of directors resigned.

Item 9.

Changes in and Disagreements With Accountants on Accounting and Financial Disclosure.

None.

Item 9A.

Controls and Procedures.

Evaluation of disclosure controls and procedures .

As of December 31, 2017, our management, with the participation of our Chief Executive Officer and Chief Financial Officer, performed an evaluation of the effectiveness of the design and operation of our disclosure controls and procedures as defined in Rules 13a-15(e) and 15d-15(e) of the Exchange Act. Our disclosure controls and procedures are designed to ensure that information required to be disclosed in the reports we file or submit under the Exchange Act is recorded, processed, summarized and reported within the time periods specified in the Securities and Exchange Commission’s rules and forms, and that such information is accumulated and communicated to our management, including the Chief Executive Officer and the Chief Financial Officer, to allow timely decisions regarding required disclosures. Based on this evaluation, our Chief Executive Officer and Chief Financial Officer concluded that, as of December 31, 2017, the design and operation of our disclosure controls and procedures were effective at a reasonable assurance level.

Any controls and procedures, no matter how well designed and operated, can provide only reasonable assurance of achieving the desired control objective and management necessarily applies its judgment in evaluating the cost-benefit relationship of possible controls and procedures.

Management’s Annual Report on Internal Control Over Financial Reporting

This Annual Report on Form 10-K does not include a report of management’s assessment regarding internal control over financial reporting or an attestation report of our registered public accounting firm due to a transition period established by rules of the SEC for newly public companies.

Changes in internal control over financial reporting.

There were no changes in our internal control over financial reporting identified in connection with the evaluation required by Rule 13a-15(d) and 15d-15(d) of the Exchange Act that occurred during the quarter ended December 31, 2017 that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.

Item 9B.

Other Information.

None.

100


 

PART III

Item 10.

Directors, Executive Officers and Corporate Governance.

The information required by this item is incorporated herein by reference to our Proxy Statement with respect to our 2018 Annual Meeting of Stockholders to be filed with the SEC within 120 days of the end of the fiscal year covered by this Annual Report on Form 10-K.

Item 11.

Executive Compensation.

The information required by this item is incorporated herein by reference to our Proxy Statement with respect to our 2018 Annual Meeting of Stockholders to be filed with the SEC within 120 days of the end of the fiscal year covered by this Annual Report on Form 10-K.

Item 12.

Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters.

The information required by this item is incorporated herein by reference to our Proxy Statement with respect to our 2018 Annual Meeting of Stockholders to be filed with the SEC within 120 days of the end of the fiscal year covered by this Annual Report on Form 10-K.

Item 13.

Certain Relationships and Related Transactions, and Director Independence.

The information required by this item is incorporated herein by reference to our Proxy Statement with respect to our 2018 Annual Meeting of Stockholders to be filed with the SEC within 120 days of the end of the fiscal year covered by this Annual Report on Form 10-K.

Item 14.

Principal Accounting Fees and Services.

The information required by this item is incorporated herein by reference to our Proxy Statement with respect to our 2018 Annual Meeting of Stockholders to be filed with the SEC within 120 days of the end of the fiscal year covered by this Annual Report on Form 10-K.

101


 

PART IV

Item 15.

Exhibits, Consolidated Financial Statement Schedules.

(a) The following documents are filed as part of this report:

1. Consolidated Financial Statements

See Index to Consolidated Financial Statements at Item 8 herein.

2. Consolidated Financial Statement Schedules

No consolidated financial statement schedules are provided because the information called for is not required or is shown either in the consolidated financial statements or notes thereto.

3. Exhibits

See the Exhibit Index immediately preceding the signature page of this Annual Report on Form 10-K.

102


 

exhibit index

 

Exhibit
Number

 

Exhibit Description

 

Form

 

Date  

 

Number  

 

Filed

Herewith

 

 

 

 

 

 

 

 

 

  3.1

Amended and Restated Certificate of Incorporation of Restoration Robotics, Inc.

8-K

 

10-17-17

 

3.1

 

 

 

 

 

 

 

 

 

 

 

  3.4

Amended and Restated Bylaws of Restoration Robotics, Inc.

8-K

 

10-17-17

 

3.2

 

 

 

 

 

 

 

 

 

 

 

  4.1

Reference is made to Exhibits  3.1 through 3.2 .

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  4.2

Form of Common Stock Certificate.

S-1/A

 

9-18-17

 

4.2

 

 

 

 

 

 

 

 

 

 

 

  4.3

Amended and Restated Investors’ Rights Agreement, dated February  7, 2013, by and among the Company and the investors listed therein, as amended.

S-1

 

9-1-17

 

10.10

 

 

 

 

 

 

 

 

 

 

 

  4.4

Form of Warrant to Purchase Stock dated August 27, 2014, issued to National Securities Corporation.

S-1

 

9-1-17

 

10.11

 

 

 

 

 

 

 

 

 

 

 

  4.5

Loan and Security Agreement, dated May 19, 2015, by and between the Company and Oxford Finance LLC.

S-1

 

9-1-17

 

10.12

 

 

 

 

 

 

 

 

 

 

 

  4.6

First Amendment to Loan and Security Agreement, dated September 15, 2015, by and between Oxford Finance LLC and the Company.

S-1

 

9-1-17

 

10.13

 

 

 

 

 

 

 

 

 

 

 

  4.7

Secured Promissory Note, dated May 19, 2015, by and between Oxford Finance LLC and the Company to purchase 276,224 shares of Series C Preferred Stock.

S-1

 

9-1-17

 

10.14

 

 

 

 

 

 

 

 

 

 

 

  4.8

Secured Promissory Note, dated May 19, 2015, by and between Oxford Finance LLC and the Company to purchase 220,979 shares of Series C Preferred Stock.

S-1

 

9-1-17

 

10.15

 

 

 

 

 

 

 

 

 

 

 

  4.9

Secured Promissory Note, dated May 19, 2015, by and between Oxford Finance LLC and the Company to purchase 220,979 shares of Series C Preferred Stock.

S-1

 

9-1-17

 

10.16

 

 

 

 

 

 

 

 

 

 

 

4.10

Secured Promissory Note, dated May 19, 2015, by and between Oxford Finance LLC and the Company to purchase 220,979 shares of Series C Preferred Stock.

S-1

 

9-1-17

 

10.17

 

 

 

 

 

 

 

 

 

 

 

4.11

Secured Promissory Note, dated May 19, 2015, by and between Oxford Finance LLC and the Company to purchase 165,734 shares of Series C Preferred Stock.

S-1

 

9-1-17

 

10.18

 

 

 

 

 

 

 

 

 

 

 

10.1

Manufacturing Agreement for Systems, dated March 1, 2016, by and between Evolve Manufacturing Technologies Inc. and the Company.

S-1

 

9-1-17

 

10.1

 

 

 

 

 

 

 

 

 

 

 

10.2

Manufacturing Agreement for Consumables, dated April 1, 2016, by and between Evolve Manufacturing Technologies Inc. and the Company.

S-1

 

9-1-17

 

10.2

 

 

 

 

 

 

 

 

 

 

 

10.3

Component Pricing Agreement, dated August 1, 2016, by and between Evolve Manufacturing Technologies Inc. and the Company.

S-1

 

9-1-17

 

10.3

 

 

 

 

 

 

 

 

 

 

 

10.4

First Amendment to Component Pricing Agreement, dated August 30, 2017, by and between Evolve Manufacturing Technologies Inc. and the Company.

S-1

 

9-1-17

 

10.4

 

 

103


 

Exhibit
Number

 

Exhibit Description

 

Form

 

Date  

 

Number  

 

Filed

Herewith

 

 

 

 

 

 

 

 

 

10.5

Lease Agreement, dated April 16, 2012, by and between Legacy Partners I San Jose, LLC and the Company.

S-1

 

9-1-17

 

10.5

 

 

 

 

 

 

 

 

 

 

 

10.6

First Amendment to Lease Agreement, dated April 27, 2016, by and between G&I VIII Baytech LP and the Company and Tenant Estoppel Certificate, dated March 30, 2017, acknowledging Bridge III CA Alviso Tech Park, LLC as successor-in-interest to Landlord thereto.

S-1

 

9-1-17

 

10.6

 

 

 

 

 

 

 

 

 

 

 

10.7†

License Agreement, dated July 25, 2006 by and between the Company, James A. Harris, M.D. and HSC Development LLC.

S-1/A

 

9-22-17

 

10.7

 

 

 

 

 

 

 

 

 

 

 

10.8†

First Amendment to License Agreement, dated January 5, 2009, by and between the Company, James A. Harris, M.D. and HSC Development LLC.

S-1/A

 

9-22-17

 

10.8

 

 

 

 

 

 

 

 

 

 

 

10.9†

Second Amendment to License Agreement, dated February 23, 2015, by and between the Company, James  A. Harris, M.D. and HSC Development LLC.

S-1/A

 

9-22-17

 

10.9

 

 

 

 

 

 

 

 

 

 

 

10.10#

2005 Stock Plan.

S-8

 

10-17-17

 

99.1

 

 

 

 

 

 

 

 

 

 

 

10.11#

Form of Notice of Stock Option Grant and Stock Option Agreement under 2005 Stock Plan.

S-1

 

9-1-17

 

10.20

 

 

 

 

 

 

 

 

 

 

 

10.12#

Form of Notice of Stock Option Grant and Stock Option Agreement to International Optionees under 2005 Stock Plan.

S-1

 

9-1-17

 

10.21

 

 

 

 

 

 

 

 

 

 

 

10.13#

2015 Equity Incentive Plan.

S-8

 

10-17-17

 

99.4

 

 

 

 

 

 

 

 

 

 

 

10.14#

Form of Stock Option Grant Notice and Stock Option Agreement under 2015 Equity Incentive Plan.

S-1

 

9-1-17

 

10.23

 

 

 

 

 

 

 

 

 

 

 

10.15#

Form of Stock Purchase Right Grant Notice and Restricted Stock Purchase Agreement under 2015 Equity Incentive Plan.

S-1

 

9-1-17

 

10.24

 

 

 

 

 

 

 

 

 

 

 

10.16#

2017 Incentive Award Plan.

S-8

 

10-17-17

 

99.11

 

 

 

 

 

 

 

 

 

 

 

10.17#

Form of Stock Option Grant Notice and Stock Option Agreement under the 2017 Incentive Award Plan.

S-1/A

 

9-18-17

 

10.26

 

 

 

 

 

 

 

 

 

 

 

10.18#

Form of Restricted Stock Award Grant Notice and Restricted Stock Award Agreement under the 2017 Incentive Award Plan.

S-1/A

 

9-18-17

 

10.27

 

 

 

 

 

 

 

 

 

 

 

10.19#

Form of Restricted Stock Unit Award Grant Notice and Restricted Stock Unit Award Agreement under the 2017 Incentive Award Plan.

S-1/A

 

9-18-17

 

10.28

 

 

 

 

 

 

 

 

 

 

 

10.20#

2017 Employee Stock Purchase Plan.

S-8

 

10-17-17

 

99.11

 

 

 

 

 

 

 

 

 

 

 

10.21#

Employment Agreement, dated September 21, 2016, by and between Ryan Rhodes and the Company.

S-1

 

9-1-17

 

10.30

 

 

 

 

 

 

 

 

 

 

 

10.22#

Employment Letter Agreement, dated November 29, 2011, by and between Charlotte Holland and the Company.

S-1

 

9-1-17

 

10.31

 

 

 

 

 

 

 

 

 

 

 

10.23#

Employment Letter Agreement, dated September 4, 2008, by and between Gabriele Zingaretti and the Company.

S-1

 

9-1-17

 

10.32

 

 

 

 

 

 

 

 

 

 

 

10.24#

Transition and Separation Agreement, dated April 1, 2016, by and between James W. McCollum and the Company.

S-1

 

9-1-17

 

10.33

 

 

104


 

Exhibit
Number

 

Exhibit Description

 

Form

 

Date  

 

Number  

 

Filed

Herewith

 

 

 

 

 

 

 

 

 

10.25#

Separation Letter Agreement, dated August, 3, 2016, by and between Lisa Edone and the Company.

S-1

 

9-1-17

 

10.34

 

 

 

 

 

 

 

 

 

 

 

10.26#

Employment Letter, dated December 1, 2017, by and between Mark Hair and the Company.

8-K

 

12-11-17

 

10.1

 

 

 

 

 

 

 

 

 

 

 

10.27#

Non-Employee Director Compensation Program.

S-1/A

 

9-18-17

 

10.35

 

 

 

 

 

 

 

 

 

 

 

10.28#

Form of Indemnification Agreement for directors and officers.

S-1/A

 

9-18-17

 

10.36

 

 

 

 

 

 

 

 

 

 

 

21.1

List of Subsidiaries.

 

 

 

 

 

 

X

 

 

 

 

 

 

 

 

 

23.1

Consent of Grant Thornton LLP, independent registered public accounting firm.

 

 

 

 

 

 

X

 

 

 

 

 

 

 

 

 

24.1

Power of Attorney. Reference is made to the signature page of this Annual Report on Form 10-K.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

31.1

Certification of Principal Executive Officer Pursuant to Rules 13a-14(a) and 15d-14(a) under the Securities Exchange Act of 1934, as Adopted Pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.

 

 

 

 

 

 

X

 

 

 

 

 

 

 

 

 

31.2

Certification of Principal Financial Officer Pursuant to Rules 13a-14(a) and 15d-14(a) under the Securities Exchange Act of 1934, as Adopted Pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.

 

 

 

 

 

 

X

 

 

 

 

 

 

 

 

 

32.1*

Certification of Principal Executive Officer Pursuant to 18 U.S.C. Section 1350, as Adopted Pursuant to Section 906 of the Sarbanes-Oxley Act of 2002 .

 

 

 

 

 

 

X

 

 

 

 

 

 

 

 

 

32.2*

Certification of Principal Financial Officer Pursuant to 18 U.S.C. Section 1350, as Adopted Pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.

 

 

 

 

 

 

X

 

 

 

 

 

 

 

 

 

101.INS

XBRL Instance Document

 

 

 

 

 

 

X

 

 

 

 

 

 

 

 

 

101.SCH

XBRL Taxonomy Extension Schema Document

 

 

 

 

 

 

X

 

 

 

 

 

 

 

 

 

101.CAL

XBRL Taxonomy Extension Calculation Linkbase Document

 

 

 

 

 

 

X

 

 

 

 

 

 

 

 

 

101.DEF

XBRL Taxonomy Extension Definition Linkbase Document

 

 

 

 

 

 

X

 

 

 

 

 

 

 

 

 

101.LAB

XBRL Taxonomy Extension Label Linkbase Document

 

 

 

 

 

 

X

 

 

 

 

 

 

 

 

 

101.PRE

XBRL Taxonomy Extension Presentation Linkbase Document

 

 

 

 

 

 

X

 

#

Indicates management contract or compensatory plan.

Portions of this exhibit (indicated by asterisks) are omitted pursuant to a request for confidential treatment that has been filed separately with the Securities and Exchange Commission.

*

The certifications attached as Exhibit 32.1 and Exhibit 32.2 that accompany this Annual Report on Form 10-K are not deemed filed with the Securities and Exchange Commission and are not to be incorporated by reference into any filing of Restoration Robotics, Inc. under the Securities Act of 1933, as amended, or the Securities Exchange Act of 1934, as amended, whether made before or after the date of this Annual Report on Form 10-K, irrespective of any general incorporation language contained in such filing.

105


 

SIGNA TURES

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, as amended, the Registrant has duly caused this Annual Report on Form 10-K to be signed on its behalf by the undersigned, thereunto duly authorized.

 

 

 

Restoration Robotics, Inc.

 

 

 

 

Date: March 5, 2018

By:

 

/s/ Ryan Rhodes

 

 

 

Ryan Rhodes

 

 

 

President, Chief Executive Officer and Director

 

106


 

POWER OF ATTORNEY

KNOW ALL PERSONS BY THESE PRESENTS, that each person whose signature appears below constitutes and appoints each of Ryan Rhodes and Mark Hair his or her true and lawful attorney-in-fact and agent, with full power of substitution, for him or her and in his or her name, place and stead, in any and all capacities, to sign any and all amendments to this Annual Report on Form 10-K, and to file the same, with all exhibits thereto, and other documents in connection therewith, with the Securities and Exchange Commission, granting unto said attorney-in-fact and agent, full power and authority to do and perform each and every act and thing requisite and necessary to be done in connection therewith, as fully to all intents and purposes as he might or could do in person, hereby ratifying and confirming all that said attorney-in-fact and agent, or his substitutes or substitute, may lawfully do or cause to be done by virtue hereof.

IN WITNESS WHEREOF, each of the undersigned has executed this Power of Attorney as of the date indicated opposite his/her name.

Pursuant to the requirements of the Securities Exchange Act of 1934, as amended, this Annual Report on Form 10-K has been signed below by the following persons on behalf of the Registrant in the capacities and on the dates indicated.

 

Signature

 

Title

 

Date

 

 

 

 

 

/s/ Ryan Rhodes

 

President, Chief Executive Officer aand Director

 

March 5, 2018

Ryan Rhodes

 

(Principal Executive Officer)

 

 

 

 

 

 

 

/s/ Mark Hair

 

Chief Financial Officer

 

March 5, 2018

Mark Hair

 

(Principal Financial and Accounting Officer)

 

 

 

 

 

 

 

/s/ Frederic Moll, M.D

 

Chairman and Director

 

March 5, 2018

Frederic Moll, M.D.

 

 

 

 

 

 

 

 

 

/s/ Jeffrey Bird, M.D., Ph.D.

 

Director

 

March 5, 2018

Jeffrey Bird, M.D., Ph.D.

 

 

 

 

 

 

 

 

 

/s/ Gil Kliman, M.D.

 

Director

 

March 5, 2018

Gil Kliman, M.D.

 

 

 

 

 

 

 

 

 

/s/ Emmett Cunningham, Jr., M.D., Ph.D.

 

Director

 

March 5, 2018

Emmett Cunningham, Jr., M.D., Ph.D.

 

 

 

 

 

 

 

 

 

/s/ Craig Taylor

 

Director

 

March 5, 2018

Craig Taylor

 

 

 

 

 

 

 

 

 

/s/ Shelley Thunen

 

Director

 

March 5, 2018

Shelley Thunen

 

 

 

 

 

107

Exhibit 21.1

 

 

List of Subsidiaries of

Restoration Robotics, Inc.

 

 

 

 

Name

  

Jurisdiction of Incorporation or Organization

Restoration Robotics, Inc. Limited

  

Hong Kong

Restoration Robotics Europe Limited

  

United Kingdom

Restoration Robotics Korea Yuhan Hoesa

  

Republic of Korea

Restoration Robotics Spain S.L.

  

Spain

 

 

 

 

 

Exhibit 23.1

CONSENT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

We have issued our report dated March 5, 2018, with respect to the consolidated financial statements included in the Annual Report of Restoration Robotics, Inc. on Form 10-K for the year ended December 31, 2017. We consent to the incorporation by reference of said report in the Registration Statement of Restoration Robotics, Inc. on Form S-8 (File No. 333- 220993).

/s/ GRANT THORNTON LLP

Denver, Colorado

March 5, 2018

Grant Thornton LLP

U.S. member firm of Grant Thornton International Ltd

 

Exhibit 31.1

CERTIFICATION OF PRESIDENT AND CHIEF EXECUTIVE OFFICER

PURSUANT TO SECTION 302 OF THE SARBANES-OXLEY ACT OF 2002

I, Ryan Rhodes, certify that:

1.

I have reviewed this quarterly report on Form 10-K of Restoration Robotics, Inc.;

2.

Based on my knowledge, this report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this report;

3.

Based on my knowledge, the financial statements, and other financial information included in this report, fairly present in all material respects the financial condition, results of operations and cash flows of the registrant as of, and for, the periods presented in this report;

4.

The registrant’s other certifying officer and I are responsible for establishing and maintaining disclosure controls and procedures (as defined in Exchange Act Rules 13a-15(e) and 15d-15(e)) for the registrant and have:

 

(a)

Designed such disclosure controls and procedures, or caused such disclosure controls and procedures to be designed under our supervision, to ensure that material information relating to the registrant, including its consolidated subsidiaries, is made known to us by others within those entities, particularly during the period in which this report is being prepared;

 

(b )

Evaluated the effectiveness of the registrant's disclosure controls and procedures and presented in this report our conclusions about the effectiveness of the disclosure controls and procedures, as of the end of the period covered by this report based on such evaluation; and

 

(c )

Disclosed in this report any change in the registrant's internal control over financial reporting that occurred during the registrant's most recent fiscal quarter (the registrant's fourth fiscal quarter in the case of an annual report) that has materially affected, or is reasonably likely to materially affect, the registrant's internal control over financial reporting; and

5.

The registrant's other certifying officer and I have disclosed, based on our most recent evaluation of internal control over financial reporting, to the registrant's auditors and the audit committee of the registrant's board of directors (or persons performing the equivalent functions):

 

(a)

All significant deficiencies and material weaknesses in the design or operation of internal control over financial reporting which are reasonably likely to adversely affect the registrant's ability to record, process, summarize and report financial information; and

 

(b)

Any fraud, whether or not material, that involves management or other employees who have a significant role in the registrant's internal control over financial reporting.

 

Date: March 5, 2018

 

By:

/s/ RYAN RHODES

 

 

 

Name: Ryan Rhodes

 

 

 

President, Chief Executive Officer

(Principal Executive Officer)

 

 

 

Exhibit 31.2

CERTIFICATION OF CHIEF FINANCIAL OFFICER

PURSUANT TO SECTION 302 OF THE SARBANES-OXLEY ACT OF 2002

I, Mark Hair, certify that:

1.

I have reviewed this quarterly report on Form 10-K of Restoration Robotics, Inc.;

2.

Based on my knowledge, this report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this report;

3.

Based on my knowledge, the financial statements, and other financial information included in this report, fairly present in all material respects the financial condition, results of operations and cash flows of the registrant as of, and for, the periods presented in this report;

4.

The registrant's other certifying officer and I are responsible for establishing and maintaining disclosure controls and procedures (as defined in Exchange Act Rules 13a-15(e) and 15d-15(e)) for the registrant and have:

 

(a)

Designed such disclosure controls and procedures, or caused such disclosure controls and procedures to be designed under our supervision, to ensure that material information relating to the registrant, including its consolidated subsidiaries, is made known to us by others within those entities, particularly during the period in which this report is being prepared;

 

(b)

Evaluated the effectiveness of the registrant's disclosure controls and procedures and presented in this report our conclusions about the effectiveness of the disclosure controls and procedures, as of the end of the period covered by this report based on such evaluation; and

 

(c)

Disclosed in this report any change in the registrant's internal control over financial reporting that occurred during the registrant's most recent fiscal quarter (the registrant's fourth fiscal quarter in the case of an annual report) that has materially affected, or is reasonably likely to materially affect, the registrant's internal control over financial reporting; and

5.

The registrant's other certifying officer and I have disclosed, based on our most recent evaluation of internal control over financial reporting, to the registrant's auditors and the audit committee of the registrant's board of directors (or persons performing the equivalent functions):

 

(a)

All significant deficiencies and material weaknesses in the design or operation of internal control over financial reporting which are reasonably likely to adversely affect the registrant's ability to record, process, summarize and report financial information; and

 

(b)

Any fraud, whether or not material, that involves management or other employees who have a significant role in the registrant's internal control over financial reporting.

 

Date: March 5, 2018

 

By:

/s/ MARK HAIR

 

 

 

Name: Mark Hair

 

 

 

Chief Financial Officer

(Principal Financial Officer)

 

 

 

Exhibit 32.1

CERTIFICATION PURSUANT TO

18 U.S.C. SECTION 1350, AS ADOPTED PURSUANT TO

SECTION 906 OF THE SARBANES-OXLEY ACT OF 2002

In connection with the quarterly report of Restoration Robotics, Inc. (the “Company”) on Form 10-K for the period ending December 31, 2017 as filed with the Securities and Exchange Commission on the date hereof (the “Report”), I certify, pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002, that:

 

(1)

The Report fully complies with the requirements of Section 13(a) or 15(d) of the Securities Exchange Act of 1934; and

 

(2)

The information contained in the Report fairly presents, in all material respects, the financial condition and result of operations of the Company.

 

Date: March 5, 2018

 

By:

/s/ RYAN RHODES

 

 

 

Name: Ryan Rhodes

 

 

 

President, Chief Executive Officer

(Principal Executive Officer)

 

 

 

Exhibit 32.2

CERTIFICATION PURSUANT TO

18 U.S.C. SECTION 1350, AS ADOPTED PURSUANT TO

SECTION 906 OF THE SARBANES-OXLEY ACT OF 2002

In connection with the quarterly report of Restoration Robotics, Inc. (the “Company”) on Form 10-K for the period ending December 31, 2017 as filed with the Securities and Exchange Commission on the date hereof (the “Report”), I certify, pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002, that:

 

(1)

The Report fully complies with the requirements of Section 13(a) or 15(d) of the Securities Exchange Act of 1934; and

 

(2)

The information contained in the Report fairly presents, in all material respects, the financial condition and result of operations of the Company.

 

Date: March 5, 2018

 

By:

/s/ MARK HAIR

 

 

 

Name: Mark Hair

 

 

 

Chief Financial Officer

(Principal Financial Officer)