UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

 

FORM 10-Q

 

QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

 

For the quarterly period ended September 30, 2019

 

or

 

TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

 

For the transition period from               to             

 

Commission File Number: 001-33301

 

ACCURAY INCORPORATED

(Exact Name of Registrant as Specified in Its Charter)

 

Delaware

 

20-8370041

(State or Other Jurisdiction of

Incorporation or Organization)

 

(IRS Employer

Identification Number)

 

1310 Chesapeake Terrace

Sunnyvale, California 94089

(Address of Principal Executive Offices Including Zip Code)

 

(408) 716-4600

(Registrant’s Telephone Number, Including Area Code)

 

Securities registered pursuant to Section 12(b) of the Act:

 

Title of each class

Trading Symbol(s)

Name of each exchange on which registered

Common Stock, $.001 par value per share

ARAY

The Nasdaq Stock Market LLC

 

Indicate by check mark whether the registrant:  (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file reports), and (2) has been subject to such filing requirements for the past 90 days.  Yes  No

 

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes  No

 

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,”  “smaller reporting company” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

 

Large accelerated filer

 

Accelerated filer

Non-accelerated filer

 

Smaller reporting company

 

 

 

Emerging growth company 

 

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. 

 

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).  Yes  No

 

As of November 1, 2019, there were 89,024,611 shares of the Registrant’s Common Stock, par value $0.001 per share, outstanding.

 

 

 

 


 

Table of Contents

 

 

 

Page No.

 

 

 

PART I.

Financial Information

 

 

 

 

Item 1.

Unaudited Condensed Consolidated Financial Statements

3

 

 

 

 

Unaudited Condensed Consolidated Balance Sheets as of September 30, 2019 and June 30, 2019

3

 

 

 

 

Unaudited Condensed Consolidated Statements of Operations and Comprehensive Loss for the three months ended September 30, 2019 and 2018

4

 

 

 

 

Unaudited Condensed Consolidated Statements of Stockholders’ Equity for the three months ended September 30, 2019 and 2018

5

 

 

 

 

Unaudited Condensed Consolidated Statements of Cash Flows for the three months ended September 30, 2019 and 2018

6

 

 

 

 

Notes to Unaudited Condensed Consolidated Financial Statements

7

 

 

 

Item 2.

Management’s Discussion and Analysis of Financial Condition and Results of Operations

21

 

 

 

Item 3.

Quantitative and Qualitative Disclosures About Market Risk

30

 

 

 

Item 4.

Controls and Procedures

31

 

 

 

PART II.

Other Information

 

 

 

 

Item 1.

Legal Proceedings

32

 

 

 

Item 1A.

Risk Factors

32

 

 

 

Item 2.

Unregistered Sales of Equity Securities and Use of Proceeds

59

 

 

 

Item 3.

Defaults Upon Senior Securities

59

 

 

 

Item 4.

Mine Safety Disclosures

59

 

 

 

Item 5.

Other Information

59

 

 

 

Item 6.

Exhibits

60

 

 

 

Signatures

 

61

 

We own or have rights to various trademarks and tradenames used in our business in the United States or other countries, including the following: Accuray®, Accuray Logo®, CyberKnife®, Hi‑Art®, RayStation®, RoboCouch®, Synchrony®, TomoTherapy®, Xsight®, Accuray Precision®, AutoSegmentation™, CTrue™, H™ Series, iDMS®, InCise™, Iris™, M6™ Series, OIS Connect™, PlanTouch®, PreciseART®, PreciseRTX®, Treatment Planning System™, QuickPlan®, TomoDirect™, TomoEdge™, TomoH®, TomoHD®, TomoHDA™, TomoHelical™, Tomo Quality Assurance™, Radixact®, Onrad ™, StatRT™, and VoLO™. ImagingRing® is a registered trademark belonging to medPhoton GmbH. RayStation® is a registered trademark belonging to RaySearch Laboratories, AB.

2


 

PART I.  FINANCIAL INFORMATION

 

Item 1.

Unaudited Condensed Consolidated Financial Statements

 

Accuray Incorporated

Unaudited Condensed Consolidated Balance Sheets

(in thousands, except share amounts and par value)

 

 

 

September 30,

2019

 

 

June 30,

2019

 

ASSETS

 

 

 

 

 

 

 

 

Current assets:

 

 

 

 

 

 

 

 

Cash and cash equivalents

 

$

80,911

 

 

$

76,798

 

Restricted cash

 

 

5,751

 

 

 

10,218

 

Accounts receivable, net of allowance for doubtful accounts of $625 and

   $605 as of September 30, 2019 and June 30, 2019, respectively (a)

 

 

104,684

 

 

 

111,885

 

Inventories

 

 

129,233

 

 

 

120,823

 

Prepaid expenses and other current assets

 

 

20,500

 

 

 

24,205

 

Deferred cost of revenue

 

 

148

 

 

 

146

 

Total current assets

 

 

341,227

 

 

 

344,075

 

Property and equipment, net

 

 

16,682

 

 

 

17,122

 

Operating lease right-of-use assets, net

 

 

28,864

 

 

 

 

Goodwill

 

 

57,657

 

 

 

57,770

 

Intangible assets, net

 

 

643

 

 

 

679

 

Restricted cash

 

 

1,226

 

 

 

1,162

 

Other assets

 

 

17,448

 

 

 

17,373

 

Total assets

 

$

463,747

 

 

$

438,181

 

LIABILITIES AND STOCKHOLDERS' EQUITY

 

 

 

 

 

 

 

 

Current liabilities:

 

 

 

 

 

 

 

 

Accounts payable

 

$

23,621

 

 

$

29,562

 

Accrued compensation

 

 

21,578

 

 

 

31,150

 

Operating lease liabilities, current

 

 

7,092

 

 

 

 

Other accrued liabilities

 

 

25,847

 

 

 

32,742

 

Customer advances

 

 

18,413

 

 

 

20,395

 

Deferred revenue

 

 

79,596

 

 

 

78,332

 

Total current liabilities

 

 

176,147

 

 

 

192,181

 

Long-term liabilities:

 

 

 

 

 

 

 

 

Operating lease liabilities, non-current

 

 

25,549

 

 

 

 

Long-term other liabilities

 

 

6,344

 

 

 

9,646

 

Deferred revenue

 

 

26,273

 

 

 

26,639

 

Long-term debt

 

 

188,460

 

 

 

159,844

 

Total liabilities

 

 

422,773

 

 

 

388,310

 

Commitments and contingencies (Note 9)

 

 

 

 

 

 

 

 

Stockholders' equity:

 

 

 

 

 

 

 

 

Common stock, $0.001 par value; authorized: 200,000,000 shares as of

   September 30, 2019 and June 30, 2019, respectively; issued and

   outstanding: 88,578,510 and 88,521,511 shares at September 30, 2019 and

   June 30, 2019, respectively

 

 

89

 

 

 

89

 

Additional paid-in-capital

 

 

536,809

 

 

 

535,332

 

Accumulated other comprehensive loss

 

 

(1,028

)

 

 

(10

)

Accumulated deficit

 

 

(494,896

)

 

 

(485,540

)

Total stockholders' equity

 

 

40,974

 

 

 

49,871

 

Total liabilities and stockholders' equity

 

$

463,747

 

 

$

438,181

 

 

 

(a)

Includes accounts receivable from joint venture of $3,438 and $0 at September 30, 2019 and June 30, 2019, respectively. See Note 14.

 

The accompanying notes are an integral part of these unaudited condensed consolidated financial statements.

3


 

Accuray Incorporated

Unaudited Condensed Consolidated Statements of Operations and Comprehensive Loss

(in thousands, except per share amounts)

 

 

 

Three Months Ended

September 30,

 

 

 

2019

 

 

2018

 

Net revenue:

 

 

 

 

 

 

 

 

Products

 

$

37,605

 

 

$

41,517

 

Services

 

 

51,972

 

 

 

54,312

 

Total net revenue (a)

 

 

89,577

 

 

 

95,829

 

Cost of revenue:

 

 

 

 

 

 

 

 

Cost of products

 

 

21,570

 

 

 

24,524

 

Cost of services

 

 

35,064

 

 

 

33,426

 

Total cost of revenue (b)

 

 

56,634

 

 

 

57,950

 

Gross profit

 

 

32,943

 

 

 

37,879

 

Operating expenses:

 

 

 

 

 

 

 

 

Research and development

 

 

13,341

 

 

 

13,889

 

Selling and marketing

 

 

13,266

 

 

 

13,036

 

General and administrative

 

 

10,616

 

 

 

15,642

 

Total operating expenses

 

 

37,223

 

 

 

42,567

 

Loss from operations

 

 

(4,280

)

 

 

(4,688

)

Other expense, net

 

 

(4,439

)

 

 

(3,983

)

Loss before provision for income taxes

 

 

(8,719

)

 

 

(8,671

)

Provision for income taxes

 

 

637

 

 

 

535

 

Net loss

 

$

(9,356

)

 

$

(9,206

)

Net loss per share - basic and diluted

 

$

(0.11

)

 

$

(0.11

)

Weighted average common shares used in computing net loss per share:

 

 

 

 

 

 

 

 

Basic and diluted

 

 

88,772

 

 

 

86,479

 

Net loss

 

$

(9,356

)

 

$

(9,206

)

Foreign currency translation adjustment

 

 

(1,018

)

 

 

(395

)

Comprehensive loss

 

$

(10,374

)

 

$

(9,601

)

 

 

(a)

Includes sales to joint venture of $3,817 and $0 for the three months ended September 30, 2019 and 2018, respectively. See Note 14.

 

(b)

Includes cost of revenue from sales to joint venture of $2,491 and $0 for the three months ended September 30, 2019 and 2018, respectively. See Note 14.

 

The accompanying notes are an integral part of these unaudited condensed consolidated financial statements.

4


 

Accuray Incorporated

Unaudited Condensed Consolidated Statements of Stockholders’ Equity

(in thousands, except share amounts)

 

 

 

Common Stock

 

 

Additional

Paid-in

 

 

Accumulated

Other

Comprehensive

Income /

 

 

Accumulated

 

 

Total

Stockholders’

 

 

 

Shares

 

 

Amount

 

 

Capital

 

 

(Loss)

 

 

Deficit

 

 

Equity

 

Balance at June 30, 2018

 

 

86,129,256

 

 

$

86

 

 

$

521,738

 

 

$

1,093

 

 

$

(474,285

)

 

$

48,632

 

Exercise of stock options, net

 

 

3,500

 

 

 

 

 

 

14

 

 

 

 

 

 

 

 

 

14

 

Issuance of restricted stock

 

 

367,504

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Share-based compensation

 

 

 

 

 

 

 

 

2,947

 

 

 

 

 

 

 

 

 

2,947

 

Adoption of new revenue recognition

   standard

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5,114

 

 

 

5,114

 

Net loss

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(9,206

)

 

 

(9,206

)

Cumulative translation adjustment

 

 

 

 

 

 

 

 

 

 

 

(395

)

 

 

 

 

 

(395

)

Balance at September 30, 2018

 

 

86,500,260

 

 

$

86

 

 

$

524,699

 

 

$

698

 

 

$

(478,377

)

 

$

47,106

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Balance at June 30, 2019

 

 

88,521,511

 

 

$

89

 

 

$

535,332

 

 

$

(10

)

 

$

(485,540

)

 

$

49,871

 

Issuance of restricted stock

 

 

356,999

 

 

 

 

 

 

(207

)

 

 

 

 

 

 

 

 

(207

)

Share-based compensation

 

 

 

 

 

 

 

 

1,684

 

 

 

 

 

 

 

 

 

1,684

 

Net loss

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(9,356

)

 

 

(9,356

)

Cumulative translation adjustment

 

 

 

 

 

 

 

 

 

 

 

(1,018

)

 

 

 

 

 

(1,018

)

Balance at September 30, 2019

 

 

88,878,510

 

 

$

89

 

 

$

536,809

 

 

$

(1,028

)

 

$

(494,896

)

 

$

40,974

 

 

5


 

Accuray Incorporated

Unaudited Condensed Consolidated Statements of Cash Flows

(in thousands)

 

 

 

Three Months Ended

September 30,

 

 

 

2019

 

 

2018

 

Cash flows from operating activities

 

 

 

 

 

 

 

 

Net loss

 

$

(9,356

)

 

$

(9,206

)

Adjustments to reconcile net loss to net cash used in operating activities:

 

 

 

 

 

 

 

 

Depreciation and amortization

 

 

1,865

 

 

 

2,129

 

Share-based compensation

 

 

1,700

 

 

 

3,212

 

Amortization of debt issuance costs

 

 

329

 

 

 

380

 

Accretion of interest on debt

 

 

965

 

 

 

811

 

Provision for bad debt

 

 

22

 

 

 

3,737

 

Provision for write-down of inventories

 

 

992

 

 

 

713

 

Loss on disposal of property and equipment

 

 

 

 

19

 

Changes in assets and liabilities:

 

 

 

 

 

 

 

 

Accounts receivable

 

 

6,785

 

 

 

(1,377

)

Inventories

 

 

(10,479

)

 

 

(10,150

)

Prepaid expenses and other assets

 

 

2,049

 

 

 

(1,096

)

Deferred cost of revenue

 

 

(2

)

 

 

459

 

Accounts payable

 

 

(5,704

)

 

 

6,256

 

Operating lease liabilities, net

 

 

(82

)

 

 

 

Accrued liabilities

 

 

(14,086

)

 

 

(8,564

)

Customer advances

 

 

(1,707

)

 

 

(3,723

)

Deferred revenues

 

 

2,088

 

 

 

(1,423

)

Net cash used in operating activities

 

 

(24,621

)

 

 

(17,823

)

Cash flows from investing activities

 

 

 

 

 

 

 

 

Purchases of property and equipment, net

 

 

(1,267

)

 

 

(1,602

)

Net cash used in investing activities

 

 

(1,267

)

 

 

(1,602

)

Cash flows from financing activities

 

 

 

 

 

 

 

 

Proceeds from employee stock plans

 

 

 

 

837

 

Taxes paid related to net share settlement of equity awards

 

 

(207

)

 

 

 

Proceeds from debt, net of costs

 

 

24,716

 

 

 

Borrowings (repayments) under Revolving Credit Facility, net

 

 

2,941

 

 

 

(3,263

)

Net cash provided by (used in) financing activities

 

 

27,450

 

 

 

(2,426

)

Effect of exchange rate changes on cash, cash equivalents and restricted cash

 

 

(1,852

)

 

 

(377

)

Net decrease in cash, cash equivalents and restricted cash

 

 

(290

)

 

 

(22,228

)

Cash, cash equivalents and restricted cash at beginning of period

 

 

88,178

 

 

 

93,533

 

Cash, cash equivalents and restricted cash at end of period

 

$

87,888

 

 

$

71,305

 

 

The accompanying notes are an integral part of these unaudited condensed consolidated financial statements.

6


 

Accuray Incorporated

Notes to Unaudited Condensed Consolidated Financial Statements

 

Note 1. The Company and its Significant Accounting Policies

The Company

 

Accuray Incorporated (together with its subsidiaries, the “Company” or “Accuray”) designs, develops and sells advanced radiosurgery and radiation therapy systems for the treatment of tumors throughout the body. The Company is incorporated in Delaware and has its principal place of business in Sunnyvale, California. The Company has primary offices in the United States, Switzerland, China, Hong Kong and Japan and conducts its business worldwide.

 

Basis of Presentation

 

The unaudited condensed consolidated financial statements include the accounts of the Company and its wholly-owned subsidiaries. All significant inter-company transactions and balances have been eliminated in consolidation.

The accompanying unaudited condensed consolidated financial statements have been prepared in accordance with United States generally accepted accounting principles (“GAAP”), pursuant to the rules and regulations of the Securities and Exchange Commission (the “SEC”). Certain information and note disclosures have been condensed or omitted pursuant to such rules and regulations. The unaudited condensed consolidated financial statements have been prepared on the same basis as the annual financial statements and, in the opinion of management, reflect all adjustments, which include only normal recurring adjustments, necessary for a fair presentation of the periods presented. The results for the three months ended September 30, 2019 are not necessarily indicative of the results to be expected for the fiscal year ending June 30, 2020, or for any other future interim period or fiscal year.

These unaudited condensed consolidated financial statements should be read in conjunction with the Company’s audited consolidated financial statements and accompanying notes for the fiscal year ended June 30, 2019 included in the Company’s Annual Report on Form 10-K filed with the SEC on August 23, 2019.

Significant Accounting Policies

 

Other than the recent accounting pronouncements adopted and discussed below under Accounting Pronouncements Recently Adopted, there have been no changes in the Company’s significant accounting policies during the three months ended September 30, 2019 compared with the significant accounting policies described in its Annual Report on Form 10-K for the fiscal year ended June 30, 2019.

 

Note 2. Recent Accounting Pronouncements

Accounting Pronouncement Recently Adopted

 

In August 2017, the FASB issued ASU No. 2017-12, Derivatives and Hedging. This guidance simplifies the application and administration of hedge accounting. The guidance amends the presentation and disclosure requirements and changes how companies assess effectiveness. The guidance is intended to more closely align hedge accounting with companies' risk management strategies, simplify the application of hedge accounting, and increase transparency as to the scope and results of hedging programs. The guidance was effective for the Company in the first quarter of fiscal 2020 and was adopted on a prospective basis. The adoption of this standard did not have a material impact on the Company’s consolidated financial statements and related disclosures.

 

In February 2016, the FASB issued ASU 2016-02, “Leases (Topic 842),” which requires lessees to recognize on the balance sheet operating and financing lease liabilities and corresponding right-of-use assets.  The Company adopted Topic 842 using the current period adjustment method as of July 1, 2019 and elected the transition option that allows the Company not to restate the comparative periods in its financial statements in the year of adoption. As a result, the Company had not changed previously disclosed amounts or provided additional disclosures for comparative periods. As of July 1, 2019 the right-of-use assets was $30.6 million and the respective lease liability was $34.5 million. The difference between the total right-of-use assets and total lease liabilities recorded as of July 1, 2019 is primarily due to the derecognition of deferred rent liabilities that were included in “Accrued expenses and other current liabilities” and “Other long-term liabilities,” respectively, in the consolidated balance sheet as of June 30, 2019. The Company also elected the package of transition expedients available for expired or existing contracts, which allowed the Company to carryforward its historical assessment of (1) whether contracts are or contain leases, (2) lease classification and (3) initial direct costs. The Company elected to account for lease and non-lease components in its facility and car leases as a single lease component. As a policy election, for leases that, at commencement date, have a lease term of 12 months or less, the Company records expenses as incurred and does not recognize right-of-use assets and lease liabilities.

 

7


 

The Company determines if an arrangement is or contains a lease at inception by evaluating various factors, including whether a vendor’s right to substitute an identified asset is substantive. Payments under its lease arrangements are primarily fixed, however, certain lease agreements contain variable payments, which are expensed as incurred and not included in the operating lease assets and liabilities. Lease classification is determined at the lease commencement date, on which the leased assets are made available for its use. Operating leases are included in “Operating lease right-of-use assets,” “Current portion of operating lease liabilities,” and “Operating lease liabilities, less current portion” in the condensed consolidated balance sheets. The Company did not have any financing leases in any of the periods presented.

 

Right-of-use assets represent the Company’s right to use an underlying asset for the lease term and lease liabilities represent its obligation to make payments arising from the lease. Operating lease right-of-use assets and liabilities are recognized at the lease commencement date based on the present value of lease payments over the lease term.  Lease payments consist primarily of the fixed payments under the arrangement, less any lease incentives such as rent holidays. The Company uses an estimate of its incremental borrowing rate (IBR) based on the information available at the lease commencement date in determining the present value of lease payments, unless the implicit rate is readily determinable. In determining the appropriate IBR, the Company considers information including, but not limited to, its credit rating and the lease term. For leases which commenced prior to the adoption of Topic 842, the Company used the IBR on July 1, 2019. For each lease transaction which include a renewal option, Management needs to determine if it is reasonably certain to exercise it. Lease expense for lease payments is recognized on a straight-line basis over the lease term.

 

In February 2018, the FASB issued ASU No. 2018-02, Reclassification of Certain Tax Effects from Accumulated Other Comprehensive Income, that allows companies to reclassify from Accumulated Other Comprehensive Income to Retained Earnings stranded tax effects resulting from the enactment of the Tax Cuts and Jobs Act (the "Tax Act"). The Company adopted ASU No. 2018‑02 as required in the first quarter of fiscal year 2020. The adoption of this ASU did not have any impact on the Company’s consolidated financial statements and related disclosures.

 

Accounting Pronouncements Not Yet Effective

 

In November 2018, the FASB issued ASU 2018-18, Collaborative Arrangements (Topic 808) to clarify revenue accounting for collaborative arrangements entered into with customers. The standard is effective for the Company beginning in the first quarter of fiscal year 2021 and will be applied retrospectively to the date of the initial application of ASC 606. Early adoption is permitted. The Company is evaluating the impact of adopting this amendment to its consolidated financial statements and related disclosures.

 

In August 2018, the FASB issued ASU 2018-15, Intangibles-Goodwill and Other-Internal-Use Software (Subtopic 350-40): Customer’s Accounting for Implementation Costs Incurred in a Cloud Computing Arrangement That Is a Service Contract, which aligns the requirements for capitalizing implementation costs incurred in a hosting arrangement that is a service contract with the requirements for capitalizing implementation costs incurred to develop or obtain internal-use software. The new standard requires capitalized costs to be amortized on a straight-line basis generally over the term of the arrangement, and the financial statement presentation for these capitalized costs would be the same as that of the fees related to the hosting arrangements. The guidance will be effective for the Company in its first quarter of fiscal 2021. Early adoption is permitted.This standard can be adopted either on retrospective or prospective basis. The Company has not yet decided whether it will early adopt and is currently evaluating the impact of the adoption of this standard on its consolidated financial statements and related disclosures.

 

In June 2016, the FASB issued ASU No. 2016-13 Measurement of Credit Losses on Financial Instruments. ASU No. 2016-13 requires measurement and recognition of expected credit losses for financial assets held. This guidance will be effective for the Company in the first quarter of fiscal 2021 and must be adopted using a modified retrospective approach, with certain exceptions. Early adoption is permitted beginning in the first quarter of fiscal 2020. The Company is evaluating whether it will early adopt and is currently assessing the impact of the adoption of this standard on its consolidated financial statements and related disclosures.

 

8


 

Note 3. Revenue

  

Contract Balances

 

The Company offers payment terms of more than one year for qualified customers and transactions in some circumstances. At times, revenue recognition occurs before billing, resulting in an unbilled receivable, which represents a contract asset. The contract asset is a component of accounts receivable and other assets for the current and non-current portions, respectively.

 

Customer advances represent deposits from customers for shipments of systems. Deferred revenue balances represent active and non-active warranties and services, which are recognized based on contract terms.

 

Changes in the contract assets and contract liabilities are as follows:

 

 

 

September 30,

2019

 

 

June 30,

2019

 

(Dollars in thousands)

 

Amount

 

 

Amount

 

Contract Assets:

 

 

 

 

 

 

 

 

Unbilled accounts receivable – current (1)

 

$

7,643

 

 

$

5,260

 

Interest receivable – current (2)

 

 

584

 

 

 

361

 

Long-term accounts receivable (2)

 

 

3,081

 

 

 

4,116

 

Interest receivable – non-current (2)

 

 

1,079

 

 

 

1,255

 

Contract Liabilities:

 

 

 

 

 

 

 

 

Customer advances

 

 

18,413

 

 

 

20,395

 

Deferred revenue – current

 

 

79,596

 

 

 

78,332

 

Deferred revenue – non-current

 

 

26,273

 

 

 

26,639

 

 

 

(1)

Included in accounts receivable on consolidated balance sheets

 

(2)

Included in prepaid expenses and other current assets on consolidated balance sheets

 

(3)

Included in other assets on consolidated balance sheets

 

During the quarter ended September 30, 2019, contract assets changed primarily due to the timing of billings occurring after revenues were recognized and payment terms exceeding 12 months. Contract liabilities changed due to timing of system sales for which the warranty has not yet started and was deferred and due to changes in transaction price.

 

Changes in deferred revenue from contracts with customers are as follows:

 

 

 

Three Months Ended

 

(Dollars in thousands)

 

September 30,

2019

 

 

June 30,

2019

 

Balance at beginning of period

 

$

104,971

 

 

$

102,124

 

New billings

 

 

90,475

 

 

 

120,263

 

Recognition of deferred revenue from opening balance

 

 

(11,191

)

 

 

(22,619

)

Recognition of new additions

 

 

(78,386

)

 

 

(94,797

)

Balance at end of period

 

$

105,869

 

 

$

104,971

 

 

Remaining Performance Obligations

 

Remaining performance obligations represent deferred revenue from open contracts for which performance has already started and the transaction price from executed and non-cancellable contracts for which performance has not yet started. Service contracts in general are considered month-to-month contracts, and therefore, the Company has elected the practical expedients to not disclose the value of unsatisfied performance obligations for contracts with an original expected duration of one year or less.

 

As of September 30, 2019, total remaining performance obligations amounted to $881.1 million. Of this total amount, $82.3 million related to long-term warranty and service, which is expected to be recognized over the remaining warranty period for systems that have been delivered. For systems that have been delivered but not yet installed, management estimates the timing of installation since warranty starts upon installation.

 

9


 

The following table represents the Company's remaining performance obligations related to long-term warranty and service as of September 30, 2019 and the estimated revenue expected to be recognized:

 

 

 

Fiscal years of revenue recognition

 

(Dollars in thousands)

 

2020

 

 

2021

 

 

2022

 

 

Thereafter

 

Long-term warranty and service

 

$

28,619

 

 

$

26,649

 

 

$

14,714

 

 

$

12,332

 

 

For the remaining $798.8 million of performance obligations, the Company estimates 21% to 30% will be recognized in the next 12 months, and the remaining 70% to 79% will be recognized in the 30 months thereafter. The Company’s historical experience indicates that some of its customers will cancel or renegotiate contracts as economic conditions change or when product offerings change during the long sales cycle. Based on historical cancellations, about 24% of the Company’s contracts may never result in revenue due to cancellation.

 

The time bands reflect management’s best estimate of when the Company will transfer control to the customer and may change based on timing of shipment, readiness of customers’ facilities for installation, installation requirements, and availability of products.

 

Capitalized Contract Costs

 

The Company capitalizes and amortizes the incremental costs of obtaining a contract, primarily related to certain bonuses and sales commissions. The capitalized bonuses and sales commissions are amortized over a period of five years commencing upon the initial transfer of control of the system to the customer following the pattern of transfer of control of the performance obligations to the customer.

 

The balance of capitalized costs to obtain a contract was $8.7 million and $6.2 million as of September 30, 2019 and 2018, respectively. The Company has classified the capitalized costs to obtain a contract as a component of prepaid expenses and other current assets and other assets with respect to the current and non-current portions of capitalized costs, respectively, on the consolidated balance sheets. The Company incurred impairment losses of $0.1 million and $0 in the three-month periods ended September 30, 2019 and 2018, respectively. The Company recognized $0.5 million and $0.9 million in expense related to the amortization of the capitalized contract costs during the three-month periods ended September 30, 2019 and 2018, respectively .

 

Note 4. Supplemental Financial Information

 

Balance Sheet Components

 

Financing receivables

 

A financing receivable is a contractual right to receive money, on demand or on fixed or determinable dates, that is recognized as an asset on the Company’s balance sheet. The Company’s financing receivables, consisting of its accounts receivable with contractual maturities of more than one year, totaled $3.1 million and $4.3 million at September 30, 2019 and June 30, 2019, respectively, and are included in other assets in the unaudited condensed consolidated balance sheets. The Company evaluates the credit quality of an obligor at contract inception and monitors it over the term of the underlying transactions. The Company performs a credit analysis for all new customers and reviews payment history, current order backlog, financial performance of the customers and other variables that augment or mitigate the inherent credit risk of a transaction. The Company classifies accounts as high risk when it considers the financing receivable to be impaired or when management believes there is a significant near-term risk of non-payment. The Company performed an assessment of the allowance for credit losses related to its financing receivables as of September 30, 2019 and June 30, 2019. Based upon such assessment, the Company had recorded adjustments of $3.6 and $3.6 to the allowance for credit losses related to such financing receivables as of September 30, 2019 and as of June 30, 2019, respectively.

10


 

A summary of the Company’s financing receivables is presented as follows (in thousands):

 

September 30, 2019

 

Financed

Service Contracts

and Other

 

Gross

 

$

12,551

 

Residual value

 

 

 

Unearned income

 

 

(1,498

)

Allowance for credit loss

 

 

(3,582

)

Total, net

 

$

7,471

 

Reported as:

 

 

 

 

Current

 

$

4,298

 

Non-current

 

 

3,173

 

Total, net

 

$

7,471

 

 

June 30, 2019

 

Financed

Service Contracts

and Other

 

Gross

 

$

13,288

 

Residual value

 

 

 

Unearned income

 

 

(1,535

)

Allowance for credit loss

 

 

(3,582

)

Total, net

 

$

8,171

 

Reported as:

 

 

 

 

Current

 

$

3,902

 

Non-current

 

 

4,269

 

Total, net

 

$

8,171

 

 

Inventories

Inventories consisted of the following (in thousands):

 

 

 

September 30,

2019

 

 

June 30,

2019

 

Raw materials

 

$

48,754

 

 

$

40,966

 

Work-in-process

 

 

19,509

 

 

 

18,152

 

Finished goods

 

 

60,970

 

 

 

61,705

 

Inventories

 

$

129,233

 

 

$

120,823

 

 

Property and equipment, net

Property and equipment, net consisted of the following (in thousands):

 

 

 

September 30,

2019

 

 

June 30,

2019

 

Furniture and fixtures

 

$

2,714

 

 

$

2,728

 

Computer and office equipment

 

 

11,202

 

 

 

11,183

 

Software

 

 

11,403

 

 

 

11,236

 

Leasehold improvements

 

 

25,755

 

 

 

25,741

 

Machinery and equipment

 

 

45,990

 

 

 

45,472

 

Construction in progress

 

 

1,556

 

 

 

1,658

 

 

 

 

98,620

 

 

 

98,018

 

Less: Accumulated depreciation

 

 

(81,938

)

 

 

(80,896

)

Property and equipment, net

 

$

16,682

 

 

$

17,122

 

 

11


 

Depreciation expense related to property and equipment for the three months ended September 30, 2019 and 2018 was $1.8 million and $2.1 million, respectively.

Accumulated Other Comprehensive Loss

The changes in accumulated other comprehensive loss are excluded from earnings and reported as a component of stockholders’ equity. The foreign currency translation adjustment results from those subsidiaries not using the U.S. Dollar as their functional currency since the majority of their economic activities are primarily denominated in their applicable local currency. Accordingly, all assets and liabilities related to these operations are translated to the U.S. Dollar at the current exchange rates at the end of each period. Revenues and expenses are translated at average exchange rates in effect during the period.

The components of accumulated other comprehensive loss in the equity section of the balance sheets are as follows (in thousands):

 

 

 

September 30,

2019

 

 

June 30,

2019

 

Cumulative foreign currency translation adjustment

 

$

(28

)

 

$

990

 

Defined benefit pension obligation

 

 

(1,000

)

 

 

(1,000

)

Accumulated other comprehensive loss

 

$

(1,028

)

 

$

(10

)

 

 

Note 5. Leases

 

The Company has operating leases for corporate offices and warehouse facilities worldwide. Additionally, the Company leases cars, copy machines and laptops through various operating leases. For some leases the Company has entered into non-cancelable operating lease agreements with various expiration dates through June 2025. Certain lease agreements include options to renew or terminate the lease, which are not reasonably certain to be exercised and therefore are not factored into the determination of lease payments.

 

Operating lease costs for the three months ended September 30, 2019 was $2.3 million, not including short-term operating lease costs, which were not material.  

 

For the three months ended September 30, 2019, cash paid for amounts included in the measurement of operating lease liabilities was approximately $2.3 million,and operating lease liabilities arising from obtaining operating right-of-use assets totaled $0.2 million. 

 

Maturities of operating lease liabilities as of September 30, 2019 are presented in the table below (in thousands):

 

Year Ending June 30,

 

Amount

 

2020 (remaining 9 months)

 

$

6,706

 

2021

 

 

8,017

 

2022

 

 

7,289

 

2023

 

 

7,139

 

2024

 

 

5,101

 

Thereafter

 

 

2,602

 

Total operating lease payments

 

 

36,854

 

Less: imputed interest

 

 

(4,213

)

Present value of operating lease liabilities

 

$

32,641

 

Weighted average remaining lease term (in years)

 

 

4.61

 

Weighted average discount rate

 

 

5.40

%

 

12


 

Future minimum commitments under the Company’s non-cancelable operating leases as of June 30, 2019 are presented in the table below (in thousands):

 

Year Ending June 30,

 

Amount

 

2020

 

$

8,675

 

2021

 

 

7,352

 

2022

 

 

7,159

 

2023

 

 

7,161

 

2024

 

 

5,118

 

Thereafter

 

 

2,610

 

Total operating lease payments

 

$

38,075

 

 

 

Note 6. Goodwill and Intangible Assets

Goodwill

Activity related to goodwill consisted of the following (in thousands):

 

 

 

September 30,

2019

 

 

June 30,

2019

 

Balance at the beginning of the period

 

$

57,770

 

 

$

57,855

 

Currency translation

 

 

(113

)

 

 

(85

)

Balance at the end of the period

 

$

57,657

 

 

$

57,770

 

 

In the second quarter of fiscal 2019, the Company performed its annual goodwill impairment test and determined that there was no impairment to goodwill. The Company continues to monitor its recorded goodwill for indicators of impairment.

Intangible Assets

The Company’s carrying amount of acquired intangible assets, net, is as follows (in thousands):

 

 

 

 

 

 

 

September 30, 2019

 

 

June 30, 2019

 

 

 

Useful

Lives

 

 

Gross

Carrying

Amount

 

 

Accumulated

Amortization

 

 

Net

Amount

 

 

Gross

Carrying

Amount

 

 

Accumulated

Amortization

 

 

Net

Amount

 

 

 

(in years)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Patent license

 

 

7

 

 

$

1,000

 

 

$

(357

)

 

$

643

 

 

$

1,000

 

 

$

(321

)

 

$

679

 

 

During fiscal 2017, the Company purchased a patent license with a useful life of seven years. The Company did not identify any triggering events that would indicate potential impairment of its definite-lived intangible and long-lived assets as of September 30, 2019 and June 30, 2019.

Amortization expense related to intangible assets for the three months ended September 30, 2019 and 2018 was $0.04 million and $0.04 million, respectively.

 

The estimated future amortization expense of acquired intangible assets as of September 30, 2019 is as follows (in thousands):

 

Year Ending June 30,

 

Amount

 

2020 (remaining 9 months)

 

$

107

 

2021

 

 

143

 

2022

 

 

143

 

2023

 

 

143

 

2024

 

 

107

 

 

 

$

643

 

 

 

13


 

Note 7. Derivative Financial Instruments

The Company manages some of its foreign currency risk through the purchase of foreign currency forward contracts that hedge against the short-term effect of currency fluctuations. These foreign currency forward contracts have a monthly maturity that mitigates the effect of rate fluctuations on certain local currency denominated intercompany balances, cash, and customer receivables. The Company does not use derivative financial instruments for speculative or trading purposes. These forward contracts are not designated as hedging instruments for accounting purposes. Principal hedged currencies include the Euro, Japanese Yen, Swiss Franc, and U.S. Dollar. There were no outstanding foreign currency forward contracts at the end of September 30, 2019 and June 30, 2019.

The following table provides information about gain (loss) associated with the Company’s derivative financial instruments (in thousands):

 

 

 

Three Months Ended

September 30,

 

 

 

2019

 

 

2018

 

Foreign currency exchange gain (loss) on foreign contracts

 

$

118

 

 

$

17

 

Foreign currency transactions gain (loss)

 

 

(538

)

 

 

(530

)

 

Note 8. Fair Value Measurements

Fair value is an exit price representing the amount that would be received to sell an asset or paid to transfer a liability in the principal or most advantageous market for the asset or liability in an orderly transaction between market participants on the measurement date. The fair value hierarchy contains three levels of inputs that may be used to measure fair value, as follows:

Level 1— Unadjusted quoted prices that are available in active markets for the identical assets or liabilities at the measurement date.

Level 2— Other observable inputs available at the measurement date, other than quoted prices included in Level 1, either directly or indirectly, including:

 

Quoted prices for similar assets or liabilities in active markets;

 

Quoted prices for identical or similar assets in non-active markets;

 

Inputs other than quoted prices that are observable for the asset or liability; and

 

Inputs that are derived principally from or corroborated by other observable market data.

Level 3— Unobservable inputs that cannot be corroborated by observable market data and require the use of significant management judgment. These values are generally determined using pricing models for which the assumptions utilize management’s estimates of market participant assumptions.

The Company had a cash balance of $80.9 million and $76.8 million at September 30, 2019 and June 30, 2019, respectively.

 

Assets and Liabilities That Are Measured at Fair Value on a Nonrecurring Basis

The Company’s debt is measured on a non-recurring basis using Level 2 inputs based upon observable inputs of the Company’s underlying stock price and the time value of the conversion option since an observable quoted price of the 3.75% Convertible Notes (as defined below) are not readily available. The Revolving Credit Facility (as defined below) and the Term Loan (as defined below) (collectively, the “Credit Facilities”) are valued at market interest rates, which the Company considers to be a level 2 fair value measurement. The carrying value of these financial instruments approximate its estimated fair value as there have not been significant changes in the Company’s credit quality or capital markets that would suggest changes in interest rates since the Credit Facilities were issued or amended in May 2019.

14


 

The following table summarizes the carrying value and estimated fair value of the Credit Facilities and the 3.75% Convertible Notes (in thousands):

 

 

 

September 30, 2019

 

 

June 30, 2019

 

 

 

Carrying

Value

 

 

Fair

Value

 

 

Carrying

Value

 

 

Fair

Value

 

3.75% Convertible Notes

 

$

73,623

 

 

$

75,098

 

 

$

72,730

 

 

$

84,227

 

Term Loan Facility

 

 

83,632

 

 

 

83,632

 

 

 

58,849

 

 

 

58,849

 

Revolving Credit Facility

 

 

31,205

 

 

 

31,205

 

 

 

28,265

 

 

 

28,265

 

Total

 

$

188,460

 

 

$

189,935

 

 

$

159,844

 

 

$

171,341

 

 

Note 9. Commitments and Contingencies

Litigation

From time to time, the Company is involved in legal proceedings arising in the ordinary course of its business. The Company records a provision for a loss when it believes that it is both probable that a loss has been incurred and the amount can be reasonably estimated. Currently, management believes the Company does not have any probable and reasonably estimable losses related to any current legal proceedings and claims. Although occasional adverse decisions or settlements may occur, management does not believe that an adverse determination with respect to any of these claims would individually or in the aggregate materially and adversely affect the Company’s financial condition or operating results. Litigation is inherently unpredictable and is subject to significant uncertainties, some of which are beyond the Company’s control. Should any of these estimates and assumptions change or prove to have been incorrect, the Company could incur significant charges related to legal matters that could have a material impact on its results of operations, financial position and cash flows.

Indemnities

Under the terms of the Company’s software license agreements with its customers, the Company agrees that in the event the software sold infringes upon any patent, copyright, trademark, or any other proprietary right of a third‑party, it will indemnify its customer licensees against any loss, expense, or liability from any damages that may be awarded against its customer. The Company includes this infringement indemnification in all of its software license agreements and selected managed services arrangements. In the event the customer cannot use the software or service due to infringement and the Company cannot obtain the right to use, replace or modify the license or service in a commercially feasible manner so that it no longer infringes, then the Company may terminate the license and provide the customer a refund of the fees paid by the customer for the infringing license or service. The Company has not recorded any liability associated with this indemnification, as it is not aware of any pending or threatened actions that represent probable losses as of September 30, 2019.

The Company enters into standard indemnification agreements with its landlords and all superior mortgagees and their respective directors, officers’ agents, and employees in the ordinary course of business. Pursuant to these agreements, the Company will indemnify, hold harmless, and agree to reimburse the indemnified party for losses suffered or incurred by the indemnified party, generally the landlords, in connection with any loss, accident, injury, or damage by any third‑party with respect to the leased facilities. The term of these indemnification agreements is from the commencement of the lease agreements until termination of the lease agreements. The maximum potential amount of future payments the Company could be required to make under these indemnification agreements is unlimited; however, historically the Company has not incurred claims or costs to defend lawsuits or settle claims related to these indemnification agreements. The Company has not recorded any liability associated with its indemnification agreements as it is not aware of any pending or threatened actions that represent probable losses as of September 30, 2019.

15


 

Commitments

 

In January 2019, the Company, through its wholly-owned subsidiary, Accuray Asia Limited (“Accuray Asia”), entered into an agreement with CNNC High Energy Equipment (Tianjin) Co., Ltd. (the “CIRC Subsidiary”), a wholly-owned subsidiary of China Isotope & Radiation Corporation, to form a joint venture, CNNC Accuray (Tianjin) Medical Technology Co. Ltd. (the “JV”), to manufacture and sell radiation oncology systems in China. Accuray Asia will have a 49% ownership interest in the JV.

 

The Company, through Accuray Asia, expects to make an initial capital contribution to the JV in stages, to be completed by December 31, 2019 in the form of in-kind contributions consisting of components for two full radiation oncology systems from the Company’s inventory in exchange for the initial 49% equity interest in the JV. Any remaining amount of capital contributions due, if not satisfied by such in-kind contributions, will be made by the Company, through Accuray Asia, in accordance with the schedule set by the board of directors of the JV.

 

Guarantees

 

As of September 30, 2019 and June 30, 2019, the Company had two 60-month bank guarantees totaling approximately $0.7 million related to a bidding process with one customer.

 

Note 10. Debt

 

3.75% Convertible Senior Notes due July 2022

 

In August 2017, the Company issued $85.0 million aggregate principal amount of its 3.75% Convertible Senior Notes due 2022 (the “3.75% Convertible Notes”) under an indenture between the Company and The Bank of New York Mellon Trust Company, N.A., as trustee. $53.0 million aggregate principal amount of the 3.75% Convertible Notes were issued to certain holders of the Company’s outstanding 3.50% Convertible Notes due 2018 and 3.50% Series A Convertible Notes due 2018 (together, the “Existing Notes”) in exchange for approximately $47.0 million aggregate principal amount of the Existing Notes (the “Exchange”), and $32.0 million aggregate principal amount of the 3.75% Convertible Notes were issued to certain other qualified new investors for cash. The net proceeds of the cash issuance were used to repurchase approximately $28.0 million of Existing Notes (the “Repurchase”).

 

Holders of the 3.75% Convertible Notes may convert their notes at any time on or after April 15, 2022 until the close of the business day immediately preceding the maturity date. Prior to April 15, 2022, holders of the 3.75% Convertible Notes may convert their notes only under certain circumstances.

 

Upon conversion, the Company will have the right to pay cash, or deliver shares of common stock of the Company or a combination thereof, at the Company’s election. The initial conversion rate is 174.8252 shares of the Company’s common stock per $1,000 principal amount (which represents an initial conversion price of approximately $5.72 per share of the Company’s common stock). The conversion rate, and thus the conversion price, is subject to adjustment as further described below.

 

Holders of the 3.75% Convertible Notes who convert their notes in connection with a “make-whole fundamental change,” as defined in the indenture, may be entitled to a make-whole premium in the form of an increase in the conversion rate. Additionally, in the event of a “fundamental change,” as defined in the indenture, holders of the 3.75% Convertible Notes may require the Company to purchase all or a portion of their note at a fundamental change repurchase price equal to 100% of the principal amount of the 3.75% Convertible Notes, plus accrued and unpaid interest, if any, to, but not including, the fundamental change repurchase date. As of September 30, 2019, $85.0 million of aggregate principal amount was outstanding.

 

Revolving Credit Facility

 

On June 14, 2017, the Company entered into a credit and security agreement with a lender (the “Credit Agreement”). The Credit Agreement provides the Company with a revolving credit facility in the initial amount of $52.0 million (the “Revolving Credit Facility”). Availability for borrowings under the Revolving Credit Facility is subject to a borrowing base that is calculated as a function of the value of the Company’s eligible accounts receivable and eligible inventory, and the Company is required to maintain a minimum drawn balance of at least 30% of such availability. Interest on the borrowings under the Revolving Credit Facility is payable monthly in arrears at an annual interest rate of reserve-adjusted, 90-day LIBOR plus 4.50% and had an initial maturity date of June 14, 2021.

 

In December 2017, concurrently with the Term Loan Agreement described below, the Company entered into an amendment to the Credit Agreement (the “Amendment” and, collectively with the Credit Agreement, the “Amended Credit Agreement”). The Amendment reduced the maximum borrowings under the Revolving Credit Facility to $32.0 million and extended the maturity date of the Revolving Credit Facility to December 15, 2022.

 

 

16


 

In July 2018, the Company amended both the Amended Credit Agreement and the Term Loan Agreement (as defined below). The amendments provide for, among other things, adjustments to the Fixed Charge Coverage Ratio such that in the case of the Defined Periods (as defined in the Amended Credit Agreement and the Term Loan Agreement) for (a) the fiscal quarter ending June 30, 2018 as well as (b) the fiscal quarter ending March 31, 2019, the Fixed Charge Coverage Ratio is not less than 0.75 to 1.00 and 0.50 to 1.00, respectively.

 

In December 2018, the Company amended the Amended Credit Agreement (“Amendment 3”) which, among other things, updated the calculation of the deferred revolving loan origination fee such that it is based on the amount of time elapsed from the effective date of Amendment 3. Other significant terms remain unchanged.

 

In May 2019, the Company amended the Amended Credit Agreement to, among other things, decrease the interest rate from 90-day LIBOR plus 4.50% to 90-day LIBOR plus 3.50% and extend the maturity date to May 30, 2024 and update the calculation of the deferred revolving loan origination fee such that it is based on the amount of time elapsed from the effective date of the May 2019 amendment. Other significant terms remain unchanged. The Company accounted for the amendment as a modification of existing debt and deferred an insignificant amount of offering costs on the consolidated balance sheet as of September 30, 2019.

 

The Amended Credit Agreement was further amended in August 2019 to, among other things, revise or add financial covenants, including the fixed charge coverage ratio, minimum net revenue, minimum consolidated cash balance and minimum consolidated domestic cash balance tests. Other significant terms remain unchanged. The Company accounted for the amendment as a modification of existing debt and deferred an insignificant amount of offering costs on the consolidated balance sheet as of September 30, 2019.

 

The Company was in compliance with the covenants under the Amended Credit Agreement, as amended, as of September 30, 2019. As of September 30, 2019, approximately $31.2 million of aggregate principal amount was outstanding under the Revolving Credit Facility.

 

Term Loan

In December 2017, the Company entered into a credit and security agreement with a lender (the “Term Loan Agreement”). The Term Loan Agreement provides for an initial term loan of $40.0 million with an additional tranche of $20.0 million undrawn and available through December 31, 2018, if specified conditions are met (the “Term Loan”). In connection with the Amendment, the Company used a portion of the net proceeds from the initial advance to repay a portion of the outstanding borrowings under the Revolving Credit Facility. Interest on the Term Loan is payable monthly in arrears at an annual interest rate of 6.75% plus 90-day LIBOR. The Term Loan Agreement matures December 15, 2022 and, if prepaid, has fees equal to 3%, 2%, and 1% of the prepayment amount if such termination occurs within the first year, the second year, and the third year of funding, respectively. The term of the loan is 60 months with interest only for the first 24 months followed by straight-line amortization of principal for the remaining months. In addition, the Company will pay an annual administrative fee of 0.25% and a final payment of 4.0% of the Term Loan amount.

In December 2018, the Company drew an additional $5.0 million under the Term Loan Agreement and in connection therewith entered into the second amendment to the Term Loan Agreement (“Amendment 2”) which, among other things, (i) extended the term loan tranche 2 commitment termination date for the remaining $15.0 million unfunded commitment from December 31, 2018 to June 30, 2019; (ii) provided that term loan tranche 2 may be drawn in two separate advances; and (iii) updated the calculation of the prepayment fee such that it is based on the amount of time elapsed from the effective date of Amendment 2.

In May 2019, the Company amended the Term Loan Agreement to, among other things, increase the loan tranche 2 commitment by $0.5 million, extend the maturity date to May 30, 2024, decrease the annual interest rate from 6.75% plus 90-day LIBOR to 5.50% plus 90-day LIBOR, and modify the calculation prepayment fee such that it is based on the amount of time elapsed from the effective date of the May 2019 amendment. The Company accounted for the amendment as a modification of existing debt and recorded approximately $1.5 million of debt discount costs associated with the amendment against long-term debt on the consolidated balance sheets.

In August 2019, the Company amended the Term Loan Agreement to, among other things, increase the loan commitment by $25 million in the form of a new tranche (“Tranche 3”), increase the annual interest rate from 5.50% plus 90-day LIBOR to 6.75% plus 90-day LIBOR, and revise or add financial covenants, including the fixed charge coverage ratio, minimum net revenue, minimum consolidated cash balance and minimum consolidated domestic cash balance tests. Other significant terms remain unchanged. The Company borrowed in full Tranche 3, or $25 million, on the date of the amendment. The Company accounted for the amendment as a modification of existing debt and recorded approximately $1.6 million of debt discount costs associated with the amendment against long-term debt on the consolidated balance sheets as of September 30, 2019.            

 

17


 

The following table presents the carrying value of the Credit Facilities and 3.75% Convertible Notes (the “Notes”) (in thousands):

 

As of  September 30, 2019

 

Revolving

Credit

Facility

 

 

3.75%

Convertible

Notes

 

 

Term Loan

Facility

 

 

Total

 

Carrying amount of equity conversion component

 

$

 

 

$

14,650

 

 

$

 

 

$

14,650

 

Principal amount of the Notes

 

$

31,205

 

 

$

85,000

 

 

$

89,093

 

 

$

205,298

 

Unamortized debt costs

 

 

 

 

 

(2,503

)

 

 

(1,141

)

 

$

(3,644

)

Unamortized debt discount

 

 

 

 

 

(8,874

)

 

 

(4,320

)

 

$

(13,194

)

Net carrying amount

 

$

31,205

 

 

$

73,623

 

 

$

83,632

 

 

$

188,460

 

Reported as:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Short-term debt

 

 

 

 

 

 

 

 

 

 

 

 

 

$

 

Long-term debt

 

 

 

 

 

 

 

 

 

 

 

 

 

 

188,460

 

Total debt

 

 

 

 

 

 

 

 

 

 

 

 

 

$

188,460

 

 

As of June 30, 2019

 

Revolving

Credit

Facility

 

 

3.75%

Convertible

Notes

 

 

Term Loan

Facility

 

 

Total

 

Carrying amount of equity conversion component

 

$

 

 

$

14,650

 

 

$

 

 

$

14,650

 

Principal amount of the Notes

 

$

28,265

 

 

$

85,000

 

 

$

63,031

 

 

$

176,296

 

Unamortized debt costs

 

 

 

 

 

(2,687

)

 

 

(1,231

)

 

 

(3,918

)

Unamortized debt discount

 

 

 

 

 

(9,583

)

 

 

(2,951

)

 

 

(12,534

)

Net carrying amount

 

$

28,265

 

 

$

72,730

 

 

$

58,849

 

 

$

159,844

 

Reported as:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Short-term debt

 

 

 

 

 

 

 

 

 

 

 

 

 

$

 

Long-term debt

 

 

 

 

 

 

 

 

 

 

 

 

 

 

159,844

 

Total debt

 

 

 

 

 

 

 

 

 

 

 

 

 

$

159,844

 

 

A summary of interest expense on the Notes and Credit Facilities is as follows (in thousands):

 

 

 

Three Months Ended

September 30,

 

 

 

2019

 

 

2018

 

Interest expense related to contractual interest coupon

 

$

2,862

 

 

$

2,325

 

Interest expense related to amortization of debt discount

 

 

965

 

 

 

810

 

Interest expense related to amortization of debt issuance costs

 

 

330

 

 

 

382

 

 

 

$

4,157

 

 

$

3,517

 

 

 

Note 11. Share-Based Compensation

The following table presents details of share-based compensation expenses by functional line item (in thousands):

 

 

 

Three Months Ended

September 30,

 

 

 

2019

 

 

2018

 

Cost of revenue

 

$

374

 

 

$

431

 

Research and development

 

 

372

 

 

 

491

 

Selling and marketing

 

 

(24

)

 

 

535

 

General and administrative

 

 

978

 

 

 

1,755

 

 

 

$

1,700

 

 

$

3,212

 

 

 

18


 

Note 12. Net Loss Per Common Share

The Company reports both basic and diluted loss per share, which is based on the weighted average number of common shares outstanding during the period.

A reconciliation of the numerator and denominator used in the calculation of basic and diluted net loss per common share follows (in thousands):

 

 

 

Three Months Ended

September 30,

 

 

 

2019

 

 

2018

 

Numerator:

 

 

 

 

 

 

 

 

Net loss used to compute basic and diluted loss per share

 

$

(9,356

)

 

$

(9,206

)

Denominator:

 

 

 

 

 

 

 

 

Weighted average shares used to compute basic and

   diluted loss per share

 

 

88,772

 

 

 

86,479

 

 

The potentially dilutive shares of the Company’s common stock resulting from the assumed exercise of outstanding stock options, the vesting of Restricted Stock Units (RSUs), Market Stock Units (MSUs) and Performance Stock Units (PSUs), and the purchase of shares under the Employee Stock Purchase Program (ESPP), as determined under the treasury stock method, are excluded from the computation of diluted net loss per share because their effect would have been anti-dilutive. Additionally, the 3.75% Convertible Notes are included in the calculation of diluted net income per share only if their inclusion is dilutive for periods during which the notes were outstanding.

The following table sets forth all potentially dilutive securities excluded from the computation in the table above because their effect would have been anti-dilutive (in thousands):

 

 

 

As of  September 30,

 

 

 

2019

 

 

2018

 

Stock options

 

 

4,772

 

 

 

2,677

 

RSUs, PSUs and MSUs

 

 

3,083

 

 

 

4,835

 

 

 

 

7,855

 

 

 

7,512

 

 

3.75% Convertible Notes—Diluted Share Impact

The 3.75% Convertible Notes have an optional physical (share), cash or combination settlement feature and contain certain conditional conversion features.  Due to the optional cash settlement feature and management’s intent to settle the principal amount thereof in cash, the shares of our common stock issuable upon conversion of the outstanding principal amount of the 3.75% Convertible Notes as of September 30, 2019, totaling approximately 14.9 million shares of our common stock, were not included in the basic and diluted net loss per common share table above.

 

Note 13. Segment Information

 

The Company has one operating and reporting segment (oncology systems group), which develops, manufactures and markets proprietary medical devices used in radiation therapy for the treatment of cancer patients. The Company’s Chief Executive Officer, its Chief Operating Decision Maker, reviews financial information presented on a consolidated basis for purposes of making operating decisions and assessing financial performance. The Company does not assess the performance of its individual product lines on measures of profit or loss, or asset-based metrics. Therefore, the information below is presented only for revenues and long-lived tangible assets by geographic area.

 

Disaggregation of Revenues

 

The Company disaggregates its revenues from contracts by geographic region, as the Company believes this best depicts how the nature, amount, timing and uncertainty of revenues and cash flows are affected by economic factors. Additionally, the Company typically recognizes revenue at a point in time for product revenue and recognizes revenue over time for service revenue.

 

19


 

Revenues attributed to a country or region is based on the shipping addresses of the Company’s customers. The following summarizes revenue by geographic region (in thousands):

 

 

 

Three Months Ended

September 30,

 

 

 

2019

 

 

2018

 

Americas

 

$

29,429

 

 

$

32,694

 

Europe, Middle East, India and Africa

 

 

31,600

 

 

 

36,035

 

Asia Pacific

 

 

14,067

 

 

 

12,177

 

Japan

 

 

14,481

 

 

 

14,923

 

Total

 

$

89,577

 

 

$

95,829

 

 

Information regarding geographic areas in which the Company has long-lived tangible assets is as follows (in thousands):

 

 

 

September 30,

 

 

June 30,

 

 

 

2019

 

 

2019

 

Americas

 

$

13,660

 

 

$

13,853

 

Europe, Middle East, India and Africa

 

$

493

 

 

 

575

 

Asia Pacific

 

 

1,322

 

 

 

1,419

 

Japan

 

 

1,207

 

 

 

1,275

 

Total

 

$

16,682

 

 

$

17,122

 

 

 

Note 14. Joint Venture

 

In January 2019, the Company’s wholly-owned subsidiary, Accuray Asia, entered into an agreement with the CIRC Subsidiary, a wholly-owned subsidiary of China Isotope & Radiation Corporation, to form the JV to manufacture and sell radiation oncology systems in China. Accuray Asia will have a 49% ownership interest in the joint venture and the CIRC Subsidiary initially has a 51% ownership interest in the joint venture. The JV was granted a business license in April 2019.

 

In exchange for the initial 49% equity interest in the JV, the Company, through Accuray Asia, expects to make its initial capital contributions to the JV by December 31, 2019 in the form of in-kind contributions consisting of components for two full radiation oncology systems from the Company’s inventory. The Company has not made any capital contribution as of September 30, 2019. One of the two radiation oncology systems was contributed in October 2019. Any remaining amount of capital contributions due, if not satisfied by such in-kind contributions, will be made by the Company, through Accuray Asia, in accordance with the schedule set by the board of directors of the JV.

 

In September 2019, the Company sold a CyberKnife System to the JV and recorded revenue of $2.8 million upon transfer of control of the system to the JV.  As of September 30, 2019 the Company had a receivable balance equal to $2.8 million for which collection is expected in the quarter ending December 31, 2019.

 

 

Note 15. Income Tax

 

On a quarterly basis, the Company provides for income taxes based upon an estimated annual effective income tax rate. The Company recognized an income tax expense of $0.6 million and $0.5 million for the three months ended September 30, 2019 and 2018. respectively.

  

 

The 2017 Tax Cuts and Jobs Act has a requirement that certain income earned by controlled foreign corporations (“CFCs”) must be included currently in the gross income of the CFC’s U.S. shareholder. The income required to be included in gross income is referred to as global intangible low tax income (“GILTI”) and is as defined under IRC Section 951A as is the excess of the shareholder’s net CFC tested income over the net deemed tangible income return. The GILTI inclusion amount is expected to be fully absorbed by net operating losses and is not expected to cause the Company to be in a U.S. taxable income position for fiscal year 2020. The Company has made a policy decision to record GILTI tax as a current-period expense when incurred.

 

In addition to the GILTI provision, the Tax Act also enacted the Base Erosion and Anti-Abuse Tax (“BEAT”). The BEAT minimum tax under IRC Section 59A is applicable to the extent that the BEAT tax amount is greater than the regular corporate tax for a given year. This tax is applicable to companies with prior 3-year average annual gross receipts exceeding $500 million. The Company does not currently meet this threshold since its current average annual gross receipts are less than $500 million.

 

The Company does not expect its unrecognized tax benefits of $16.3 million to change significantly over the next 12 months. Interest and penalties accrued on unrecognized tax benefits is recorded as a component of income tax expense.

 

20


 

Item 2.

Management’s Discussion and Analysis of Financial Condition and Results of Operations

 

The following discussion and analysis of our financial condition as of September 30, 2019 and results of operations for the three months ended September 30, 2019 and 2018 should be read together with our unaudited condensed consolidated financial statements and related notes included in this report. Statements made in this Form 10-Q report that are not statements of historical fact are forward-looking statements that are subject to the “safe harbor” provisions of the Private Securities Litigation Reform Act of 1995. Forward-looking statements in this report relate, but are not limited, to: our future results of operations and financial position, including the sufficiency of cash resources and expected cash flows to fund future operations, including the next 12 months; our backlog and expectations regarding age-outs, cancellations of contracts and foreign currency impacts; the anticipated drivers of our future capital requirements; our expectations regarding the improvements in efficiency made by the multi-leaf collimator, or InCise MLC, and the VOLO Optimizer software upgrade on the CyberKnife Systems, and their impact on our business; our expectations regarding the improvements Synchrony motion tracking provides for the Radixact System and timing of its commercialization and shipment, our expectations regarding the factors that will impact long-term success, sales, competitive positioning and long-term success for our CyberKnife and TomoTherapy Systems, including the Radixact System; our belief that TomoTherapy and Radixact Systems offer clinicians and patients significant benefits over other radiation therapy systems in the market; expectations regarding the strategy, timing, income, and impact of our China joint venture on our business; the anticipated risks associated with our foreign operations and fluctuations in the U.S. Dollar and foreign currencies as well as our ability to mitigate such risks; tariffs and trade policies; expectations related to the effect of the GILTI tax on our taxable income position; the sufficiency of our cash, cash flow equivalents and investments to meet our anticipated cash needs for working capital and capital expenditures and our business strategy, plans and objectives. Forward-looking statements generally can be identified by words such as “anticipates,” “believes,” “estimates,” “expects,” “intends,” “plans,” “predicts,” “projects,” “may,” “will be,” “will continue,” “will likely result,” and similar expressions. These forward-looking statements involve risks and uncertainties. If any of these risks or uncertainties materialize, or if any of our assumptions prove incorrect, actual results could differ materially from the results expressed or implied by these forward-looking statements. These risks and uncertainties include, those discussed in this quarterly report, in particular under the heading “Risk Factors” in Part II, Item 1A as well as the risks detailed in Part I, Item 1A of our annual report on Form 10-K for fiscal year 2018, and other filings we make with the Securities and Exchange Commission. Forward-looking statements speak only as of the date the statements are made and are based on information available to us at the time those statements are made and/or management’s good faith belief as of that time with respect to future events. We assume no obligation to update forward-looking statements to reflect actual performance or results, changes in assumptions or changes in other factors affecting forward-looking information, except to the extent required by applicable securities laws. Accordingly, investors should not place undue reliance on any forward-looking statements.

 

In this report, “Accuray,” the “Company,” “we,” “us,” and “our” refer to Accuray Incorporated and its subsidiaries.

 

Overview

Products and Markets

 

We are a radiation oncology company that develops, manufactures, sells and supports precise, innovative treatment solutions that set the standard of care, with the aim of helping patients live longer, better lives. Our leading-edge technologies, the CyberKnife and TomoTherapy Systems, including the Radixact Systems, the next generation TomoTherapy platform, are designed to deliver advanced radiation therapy including radiosurgery, stereotactic body radiation therapy, intensity modulated radiation therapy, image-guided radiation therapy and adaptive radiation therapy tailored to the specific needs of each patient. The CyberKnife and TomoTherapy Systems are complementary offerings serving largely separate patient populations treated by the same medical specialty, radiation oncology. Both systems have advanced capabilities that offer increased treatment flexibility to meet the needs of an expanding patient population including patients requiring retreatment with radiation therapy and palliative care. We also offer comprehensive software solutions to enable and enhance the precise and efficient radiosurgery and radiotherapy treatment with our CyberKnife and TomoTherapy Systems. In addition to these products, we also provide services, which include post-contract customer support (warranty period services and post warranty services), installation services, training, and other professional services.

 

The CyberKnife Systems

The CyberKnife Systems are robotic systems designed to deliver radiosurgery treatments to cancer tumors anywhere in the body. The CyberKnife Systems are the only dedicated, full-body robotic radiosurgery systems on the market. Radiosurgery is an alternative to traditional surgery for tumors and is performed on an outpatient basis in one to five treatment sessions. It enables the treatment of patients who typically might not otherwise be treated with radiation, who may not be good candidates for surgery, or who desire non-surgical treatments. The use of radiosurgery with CyberKnife Systems to treat tumors throughout the body has grown significantly in recent years, but currently only a small portion of the patients who develop tumors treatable with CyberKnife Systems are treated with these systems. A determination of when it may or may not be appropriate to use a CyberKnife System for treatment is at the discretion

21


 

of the treating physician and depends on the specific patient. However, CyberKnife Systems are generally not used to treat (1) very large tumors, which are considerably wider than the radiation beam that can be delivered by CyberKnife Systems, (2) diffuse wide-spread disease, as is often the case for late stage cancers, because they are not localized (though CyberKnife Systems might be used to treat a focal area of the disease), and (3) systemic diseases, like leukemia and lymphoma, which are not localized to an organ, but rather involve cells throughout the body.

Our CyberKnife M6 Series Systems have the option of: fixed collimator, Iris Variable Aperture Collimator and/or multi-leaf collimator, or InCise MLC. The InCise MLC is designed specifically for the M6 Series. With the InCise MLC, clinicians can deliver the same precise radiosurgery treatments they have come to expect with the CyberKnife System, faster and for a wider range of tumor types than prior CyberKnife Systems. The InCise MLC makes it faster and more efficient to treat a wider range of tumor types with the CyberKnife M6 Series System, including larger tumors and those with multiple sites of disease.

Most recently, we introduced the VOLO Optimizer software upgrade for the CyberKnife System. The VOLO facilitates the development of clinically optimal treatment plans up to 90 percent faster than before and the delivery of the treatment up to an estimated 50 percent faster than before, allowing CyberKnife treatments to typically be performed in 15 to 30 minutes.

We believe the long-term success of the CyberKnife Systems is dependent on a number of factors including the following:

 

Continued adoption of our CyberKnife M6 Series Systems;

 

Greater awareness among doctors and patients of the benefits of radiosurgery conducted with the CyberKnife Systems;

 

Continued evolution in clinical studies demonstrating the safety, efficacy and other benefits of using the CyberKnife Systems to treat tumors in various parts of the body;

 

Change in medical practice leading to utilization of stereotactic body radiosurgery more regularly as an alternative to surgery or other treatments;

 

Continued advances in our technology that improve the quality of treatments and ease of use of the CyberKnife Systems;

 

Receipt of regulatory approvals in various countries which are expected to improve access to radiosurgery with the CyberKnife Systems in such countries;

 

Medical insurance reimbursement policies that cover CyberKnife System treatments; and

 

Our ability to expand sales of CyberKnife Systems in countries throughout the world where we do not currently sell or have not historically sold a significant number of CyberKnife Systems.

 

TomoTherapy Systems, including Radixact, the next generation TomoTherapy platform

 

The TomoTherapy Systems are advanced, fully integrated and versatile radiation therapy systems for the treatment of a wide range of cancer types. The TomoTherapy Systems are specifically designed for image-guided intensity-modulated radiation therapy (“IG-IMRT”). The TomoTherapy Systems include the TomoTherapy H Series Systems with configurations of TomoH, TomoHD, and TomoHDA. Based on a CT scanner platform, the systems provide continuous delivery of radiation from 360 degrees around the patient, or delivery from clinician-specified beam angles. These unique features, combined with daily 3D image guidance, enable physicians to deliver highly accurate, individualized dose distributions which precisely conform to the shape of the patient’s tumor while minimizing dose to normal, healthy tissue, resulting in fewer side effects for the patient. The TomoTherapy Systems are capable of treating all standard radiation therapy indications including breast, prostate, lung, and head and neck cancers, in addition to complex and novel treatments such as total marrow irradiation. The Radixact System, the next generation TomoTherapy platform, includes our integrated Accuray Precision treatment planning software and new iDMS Data Management System. The Radixact System leverages the TomoTherapy System’s efficient daily low-dose fan beam MVCT image guidance and unique ring gantry architecture, delivering precise radiation treatments for more patients, faster, with simpler, more automated workflows.

 

Most recently, Accuray introduced its Synchrony motion tracking and correction technology for the Radixact System. This feature adds intrafraction motion synchronization capabilities to the Radixact System, enabling real-time tracking, visualization and correction for tumor motion during treatment, with the goal of improving dose accuracy and treatment times compared to conventional radiation therapy systems. We expect to ship Synchrony for Radixact to selected clinical evaluation sites globally through the end of calendar year 2019, with broader commercial launch in early calendar year 2020.

 

22


 

We believe the Radixact System and other TomoTherapy Systems offer clinicians and patients significant benefits over other radiation therapy systems in the market. We believe our ability to capture more sales will be influenced by a number of factors including the following:

 

Continued adoption of our TomoTherapy Systems, including the adoption of Radixact Systems in markets where it is available;

 

Greater awareness among doctors and patients of the unique benefits of radiation therapy using TomoTherapy Systems because of their ring gantry architecture and ability to deliver treatment from 360 degrees around the patient;

 

Advances in our technology that improve the quality of treatments and ease of use of TomoTherapy Systems;

 

Greater awareness among doctors of the now-established reliability of TomoTherapy Systems; and

 

Our ability to expand sales of TomoTherapy Systems in countries throughout the world where we do not currently sell or have not historically sold a significant number of TomoTherapy Systems.

 

Sale of Our Products

 

Generating revenue from the sale of our systems is a lengthy process. Selling our systems, from first contact with a potential customer to a signed sales contract that meets our backlog criteria (as discussed below) varies significantly and generally spans between six months and two years. The length of time between receipt of a signed contract and revenue recognition is generally governed by the time required by the customer to build, renovate or prepare the treatment room for installation of the system.

 

In the United States, we primarily market directly to customers, including hospitals and stand-alone treatment facilities, through our sales organization and we also market to customers through sales agents and group purchasing organizations. Outside the United States, we market to customers directly and through distributors and sales agents. In addition to our offices in the United States, we have sales and service offices in Europe, Asia, and South America.

 

Joint Venture

 

In January 2019, our wholly-owned subsidiary, Accuray Asia Limited (“Accuray Asia”), entered into an agreement with CNNC High Energy Equipment (Tianjin) Co., Ltd. (the “CIRC Subsidiary”), a wholly-owned subsidiary of China Isotope & Radiation Corporation, to form a joint venture, CNNC Accuray (Tianjin) Medical Technology Co. Ltd. (the “JV”), to manufacture and sell radiation oncology systems in China. The JV aims to be uniquely positioned to serve China, the world’s largest growth market for radiation oncology systems. China represents a significantly underserved market for linacs based on the country’s population and cancer incidence rates on both an absolute and relative country basis. Accuray Asia initially has a 49% ownership interest in the JV and the CIRC Subsidiary initially has a 51% ownership interest in the joint venture.

 

In exchange for the initial 49% equity interest in the JV, we, through Accuray Asia, expect to make our initial capital contribution to the JV in stages, to be completed by December 31, 2019 in the form of in-kind contributions consisting of components for two full radiation oncology systems from our inventory. Any remaining amount of capital contributions due, if not satisfied by such in-kind contributions, will be made by us, through Accuray Asia, in accordance with the schedule set by the board of directors of the JV.

 

In July 2019, the JV broke ground on its facility based in Tianjin, China, expected to serve as headquarters and home of the sales organization and service operations. Also in July 2019, the JV received the Radiation Safety License from the China Ministry of Environmental Protection. This license, along with the license to do business in China received in April 2019 and the Medical Device Operating Permit received in June 2019, enables the JV to sell and install our radiation therapy devices in China.

 

With the receipt of the necessary permits and licenses to operate, the JV has begun selling products in China, much like a distributor. In the long term, we anticipate that the JV will manufacture and sell a locally branded “Made in China” radiotherapy device in the Class B license category, which would replace our current offering in that category. We believe this strategy will allow us to best maximize both near and longer-term opportunities in China.

 

In October 2019, our systems were named in 50 out of 58 Class A user licenses awarded by the China National Health Commission. The Chinese Ministry of Health requires a tender process following the license awards for all participating end user hospitals prior to being able to take receipt of a Class A device. This tender process defines the transactional terms and conditions related to each hospital’s equipment order and is not a competitive bidding situation that would result in changes in the specific device for which the hospital has received the Class A user license.

 

We are assessing the accounting treatment of our investment in the JV and expect to apply the equity method of accounting to the ownership interest in the JV upon making our contribution as we have the ability to exercise significant influence over the JV but lack controlling financial interest and are not the primary beneficiary. We will recognize revenue on sales to the JV in the current period,

23


 

eliminating a portion of profit to the extent goods sold have not been sold through by the JV to an end customer at the end of each reporting period. We will recognize the 49% proportionate share of the JV income or loss on a one-quarter lag due to the timing of the availability of the JV’s financial records.

 

Backlog

 

Effective at the beginning of our fiscal year 2019, we updated our backlog policy to include certain upgrades sold through service contracts. As a result, the portion of the order that is recognizable as product revenue and upgrades sold on service contracts are reported as backlog. The portion of the order that is recognized as other service revenue (for example, PCS, installation, training and professional services) is not included in reported backlog. As of September 30, 2019, backlog totaled $495.0 million, of which $1.5 million represented upgrades sold through service contracts. As of June 30, 2019, backlog totaled $495.6 million.

In order for the product portion of a system sales agreement to be counted as backlog, it must meet the following criteria:

 

The contract is properly executed by both the customer and us. A customer purchase order that incorporates the terms of our contract quote will be considered equivalent to a signed and executed contract. The contract has either cleared all its contingencies or contained no contingencies when signed.

 

We have received a minimum deposit or a letter of credit; or the sale is to a customer where a deposit is deemed not necessary or customary (i.e. sale to a government entity, a large hospital, group of hospitals or cancer care group that has sufficient credit, customers with trade-in of existing equipment, sales via tender awards, or indirect channel sales that have signed contracts with end-customers);

 

The specific end customer site has been identified by the customer in the written contract or written amendment; and

 

Less than 2.5 years have passed since the contract met all the criteria above.

Although our backlog includes only contractual agreements with our customers for the purchase of CyberKnife Systems, TomoTherapy Systems, including Radixact Systems, and related upgrades, we cannot provide assurance that we will convert backlog into recognized revenue due primarily to factors outside of our control. The amount of backlog recognized into revenue is primarily impacted by three items: cancellations, age-outs and foreign currency fluctuations. Orders could be cancelled for reasons including, without limitation, changes in customers’ needs or financial condition, changes in government or health insurance reimbursement policies, or changes to regulatory requirements. In addition to cancellations, after 2.5 years, if we have not been able to recognize revenue on a contract, we remove the revenue associated with the contract from backlog and the order is considered aged out. Contracts may age-out for many reasons, including but not limited to, inability of the customer to pay, inability of the customer to adapt their facilities to accommodate our products in a timely manner, or inability to timely obtain licenses necessary for customer facilities or operation of our equipment. Our backlog also includes amounts not denominated in U.S. Dollars and therefore fluctuations in the U.S. Dollar as compared to other currencies will impact revenue. Generally, strengthening of the U.S. Dollar will negatively impact revenue. Backlog is stated at historical foreign currency exchange rates, and revenue is released from backlog at current exchange rates, with any difference recorded as a backlog adjustment.

 

A summary of gross orders, net orders, and order backlog is as follows (in thousands):

 

 

 

Three Months Ended

September 30,

 

 

 

2019

 

 

2018

 

Gross orders

 

$

78,487

 

 

$

61,414

 

Net age-outs

 

 

(35,879

)

 

 

(26,469

)

Cancellations

 

 

(1,778

)

 

 

(6,639

)

Currency impacts and other

 

 

(3,455

)

 

 

(3,395

)

Net orders

 

$

37,375

 

 

$

24,911

 

Order backlog at the end of the period

 

$

495,029

 

 

$

461,876

 

 

Gross Orders

 

Gross orders are defined as the sum of new orders recorded during the period adjusted for any revisions to existing orders during the period.

24


 

Gross orders increased by $17.1 million for the three months ended September 30, 2019, as compared to the three months ended September 30, 2018. This was primarily a result of an increase of $17.9 million in new system order volume compared to the same prior year period, which primarily related to a $20.7 million increase in CyberKnife System orders, offset by a $2.8 million decrease in TomoTherapy System orders.

Net Orders

Net orders are defined as gross orders less cancellations, age-outs, foreign exchange and other adjustments during the period.

Net orders increased by $12.5 million for the three months ended September 30, 2019, as compared to the three months ended September 30, 2018, resulting from an increase in gross orders of $17.1 million and a decrease in cancellations of $4.8 million, offset by an increase in net age-outs of $9.4 million.

 

 

The net age-outs for the three months ended September 30, 2019 were $35.9 million. There were no age-ins, which represent orders that previously aged-out but have been taken to revenue in the current period. Age-ins offset the gross amount of age-outs in a particular period.

 

 

There were $1.8 million in cancellations in the three months ended September 30, 2018 and $6.6 million in cancellations in the three months ended September 30, 2018. Cancellations are outside of our control and are difficult to forecast; however, we continue to work closely with our customers to minimize the impact of cancellations on our business.

 

 

Foreign currency and other impacts decreased net orders by $3.4 million for the three months ended September 30, 2019 while the impacts of ASC 606 adjustments and foreign currency and other impacts decreased net orders by $3.4 million for the three months ended September 30, 2018.

 

Results of Operations — Three months ended September 30, 2019 and 2018

 

 

 

Three Months Ended September 30,

 

 

 

2019

 

 

2018

 

 

Change

 

(Dollars in thousands)

 

Amount

 

 

Amount

 

 

$

 

 

%

 

Products

 

$

37,605

 

 

$

41,517

 

 

 

(3,912

)

 

 

(9

)

Services

 

 

51,972

 

 

 

54,312

 

 

 

(2,340

)

 

 

(4

)

Net revenue

 

 

89,577

 

 

 

95,829

 

 

 

(6,252

)

 

 

(7

)

Gross profit

 

 

32,943

 

 

 

37,879

 

 

 

(4,936

)

 

 

(13

)

Products gross profit

 

 

16,035

 

 

 

16,993

 

 

 

(958

)

 

 

(6

)

Services gross profit

 

 

16,908

 

 

 

20,886

 

 

 

(3,978

)

 

 

(19

)

Research and development expenses

 

 

13,341

 

 

 

13,889

 

 

 

(548

)

 

 

(4

)

Selling and marketing expenses

 

 

13,266

 

 

 

13,036

 

 

 

230

 

 

 

2

 

General and administrative expenses

 

 

10,616

 

 

 

15,642

 

 

 

(5,026

)

 

 

(32

)

Other expense, net

 

 

4,439

 

 

 

3,983

 

 

 

456

 

 

 

11

 

Provision for income taxes

 

 

637

 

 

 

535

 

 

 

102

 

 

 

19

 

Net loss

 

$

(9,356

)

 

$

(9,206

)

 

 

(150

)

 

 

(2

)

 

Net Revenue

 

Product Net Revenue

 

Product net revenue decreased by $3.9 million for the three months ended September 30, 2019, as compared to the three months ended September 30, 2018, primarily due to a $4.5 million decrease in unit volume sales, offset by an increase of $0.6 million increase in upgrade and other revenue as compared to the prior year period.

 

Services Net Revenue

 

Services net revenue decreased by $2.3 million for the three months ended September 30, 2019, as compared to the three months ended September 30, 2018, primarily due to a decrease of $2.7 million of upgrade and spare part sales, offset by an increase of $0.4 million in installation revenue.

25


 

Percentage of net revenue by geographic region, based on the shipping location of our customers, is as follows (in thousands, except percentages):

 

 

 

Three Months Ended

September 30,

 

 

 

2019

 

 

2018

 

Net revenue

 

$

89,577

 

 

$

95,829

 

Americas

 

 

33

%

 

 

34

%

Europe, Middle East, India and Africa

 

 

35

%

 

 

38

%

Asia Pacific

 

 

16

%

 

 

13

%

Japan

 

 

16

%

 

 

16

%

 

Revenue derived from sales outside of the Americas region as a percentage of our total net revenue remained consistent for the three-month period ended September 30, 2019 as compared to the same period in the prior fiscal year.

 

Gross Profit

 

Overall gross profit for the three months ended September 30, 2019 decreased by $4.9 million, or 13%, as compared to the three months ended September 30, 2018, primarily due to a decrease in services gross profit. Product gross profit decreased by $1.0 million, or 6%, due to lower unit volume in the first quarter of fiscal 2020 as compared to the same period in the prior fiscal year. The decrease was accompanied by a $4.0 million, or 19%, decrease in service gross profit due to an increase in service part consumption.

 

Research and Development

 

Research and development expenses decreased by $0.5 million, or 4%, for the three months ended September 30, 2019, as compared to the same period in the prior year. The decrease was the result of lower spending on certain research and development projects.

 

Selling and Marketing

 

Selling and marketing expenses increased slightly by $0.2 million, or 2%, for the three months ended September 30, 2019, as compared to the same period in the prior year. The increase relates to expenses incurred as a result of key trade shows that occurred in the first quarter of fiscal 2020 which were offset by a decrease in compensation expenses due to lower headcount.

 

General and Administrative

 

General and administrative expenses decreased by $5.0 million, or 32%, for the three months ended September 30, 2019, as compared to the same period in the prior year. The decrease was primarily due to a $3.7 million reduction in bad debt expense, a $0.9 million decrease in compensation and benefits, and a $0.3 million decrease in outside services.

 

Other Expense, net

 

Other expense, net increased by $0.5 million, or 11%, for the three months ended September 30, 2019, as compared to the same period in the prior year. The increase in other expense, net was primarily due to $0.6 million higher interest expense on outstanding debt, partially offset by a $0.1 million decrease in foreign currency transaction loss.

 

Provision for Income Taxes

 

On a quarterly basis, we provide for income taxes based upon an estimated annual effective income tax rate. We recognized income tax expense of $0.6 million and $0.5 million for the three months ended September 30, 2019 and 2018, respectively. The increase in income tax expense in the current quarter was driven by a prior period tax benefit recorded in the three months ended September 30, 2018, as compared to the same period in the current fiscal year.

 

Starting in our fiscal year 2019, certain income earned by controlling foreign corporations (“CFCs”) must be included in the gross income of the CFC’s U.S. shareholder. The income required to be included in gross income is referred to as global intangible low tax income (“GILTI”) and is defined under IRC Section 951A as the excess of the shareholder’s net CFC tested income over the net deemed tangible income return. The GILTI inclusion amount is expected to be fully absorbed by net operating losses and is not expected to cause us to be in a U.S. taxable income position for fiscal year 2020.

 

26


 

Liquidity and Capital Resources

 

At September 30, 2019, we had $80.9 million in cash and cash equivalents. Refer to Note 10. Debt to our unaudited condensed consolidated financial statements included in this Quarterly Report on Form 10-Q for discussion of the Term Loan, the Revolving Credit Facility and our Convertible Notes outstanding as of September 30, 2019. Based on our cash and cash equivalents balance, available debt facilities, current business plan and revenue prospects, we believe that we will have sufficient cash resources and anticipated cash flows to fund our operations for at least the next 12 months. In August 2019, we increased our Term Loan commitment by $25 million.

 

As of September 30, 2019, we had approximately $47.3 million of cash and cash equivalents in our foreign subsidiaries. There could be additional foreign tax withholdings that would be due depending on the country from which the funds were repatriated. Our foreign earnings are deemed to be indefinitely invested outside the U.S.

 

Our cash flows for the three months ended September 30, 2019 and 2018 are summarized as follows (in thousands):

 

 

 

Three Months Ended

September 30,

 

 

 

2019

 

 

2018

 

Net cash used in operating activities

 

$

(24,621

)

 

$

(17,823

)

Net cash used in investing activities

 

 

(1,267

)

 

 

(1,602

)

Net cash used in financing activities

 

 

27,450

 

 

 

(2,426

)

Effect of exchange rate changes on cash, cash equivalents

   and restricted cash

 

 

(1,852

)

 

 

(377

)

Net decrease in cash, cash equivalents and restricted cash

 

$

(290

)

 

$

(22,228

)

 

Cash Flows from Operating Activities

 

Net cash used in operating activities was $24.6 million during the three months ended September 30, 2019, resulting primarily from a net loss of $9.4 million and a net change in operating assets and liabilities of $21.1 million that was offset by non-cash items of $5.9 million.

 

 

Non-cash items primarily consisted of depreciation and amortization expense of $1.9 million, share-based compensation expense of $1.7 million, non-cash interest expense on debt of $1.3 million, and inventories write-down of $1.0 million;

 

 

The net change in operating assets and liabilities was primarily due to an increase in inventories of $10.5 million to support anticipated product shipments in future periods, an increase in account payable of $5.7 million due to the timing of payments to vendors, and an decrease in compensation related accrued liabilities of $14.1 million.

 

Net cash used in operating activities was $17.8 million during the three months ended September 30, 2018, resulting primarily from a net loss of $9.2 million and a net change in operating assets and liabilities of $19.6 million that was offset by non-cash items of $11.0 million. Non-cash items primarily consisted of bad debt expense of $3.7 million, share-based compensation expense of $3.2 million, depreciation and amortization expense of $2.2 million, non-cash interest expense on debt of $1.2 million, and inventories write-down of $0.7 million. Net change in operating assets and liabilities was primarily due to an increase in inventories of $10.2 million to support anticipated product shipments in future periods, an increase in account payable of $6.3 million due to the timing of payments to vendors, and a decrease in compensation related accrued liabilities of $8.6 million.

 

Cash Flows from Investing Activities

 

Net cash used by investing activities was $1.3 million for the three months ended September 30, 2019 for purchases of property and equipment.

 

Net cash used in investing activities was $1.6 million for the three months ended September 30, 2018 for purchases of property and equipment.

 

Cash Flows from Financing Activities

 

Net cash provided by financing activities during the three months ended September 30, 2019 was $27.5 million, which was due to $24.7 million, net, drawn against our Term Loan and $2.9 million in net borrowings on the Revolving Credit Facility.

27


 

 

Net cash used in financing activities during the three months ended September 30, 2018 was $2.4 million, which was due to $3.2 million used to pay down the Revolving Credit Facility. This payment was offset by $0.8 million in proceeds from employee stock plans.

 

Operating Capital and Capital Expenditure Requirements

 

Our future capital requirements depend on numerous factors. These factors include but are not limited to the following:

 

 

Revenue generated by sales of our products and service plans;

 

 

Costs associated with our research and development, sales and marketing initiatives and manufacturing activities;

 

 

Facilities, equipment and information technology (“IT”) systems required to support current and future operations;

 

 

Timing and ability to introduce new products;

 

 

Costs of obtaining and maintaining U.S. Food and Drug Administration (the “FDA”) and other regulatory clearances of our products;

 

 

Effects of competing technological and market developments; and

 

 

Number and timing of acquisitions and other strategic transactions.

 

We believe that our current cash and cash equivalents will be sufficient to meet our anticipated cash needs for working capital and capital expenditures for at least the next 12 months. If these sources of cash and cash equivalents are insufficient to satisfy our liquidity requirements, we may seek to sell additional equity or debt securities or enter into additional credit facilities. The sale of additional equity or convertible debt securities could result in dilution to our stockholders. If additional funds are raised through the issuance of debt securities, these securities could have rights senior to those associated with our common stock and could contain covenants that would restrict our operations. Additional financing may not be available at all, or in amounts or on terms acceptable to us. If we are unable to obtain this additional financing, we may be required to reduce the scope of our planned product development and marketing efforts.

 

Contractual Obligations and Commitments

 

We presented our contractual obligations in our Annual Report on Form 10-K for the fiscal year ended June 30, 2019. Our contractual obligations consist of debt, operating leases, purchase commitments, and other contractual obligations. There have been no material changes to these obligations outside the ordinary course of business during the three months ended September 30, 2019 as compared to the contractual obligations disclosed in the “Management’s Discussion and Analysis of Financial Condition and Results of Operations” section of our Annual Report on Form 10-K for the year ended June 30, 2019.

 

Off-Balance Sheet Arrangements

 

In the normal course of business, we provide standby letters of credit or other guarantee instruments to certain parties, initiated by either our subsidiaries or by us, as required for such transactions. As of September 30, 2019 and June 30, 2019 we had two 60‑month bank guarantees totaling approximately $0.7 million related to a bidding process with one customer.

 

Critical Accounting Policies and Estimates

 

The discussion and analysis of our financial condition and results of operations is based on our unaudited condensed consolidated financial statements, which have been prepared in accordance with accounting principles generally accepted in the United States of America. The preparation of these unaudited condensed consolidated financial statements requires management to make estimates and judgments that affect the reported amounts of assets and liabilities and the disclosure of contingent assets and liabilities at the date of the consolidated financial statements, as well as revenue and expenses during the reporting periods. We evaluate our estimates and judgments on an ongoing basis. We base our estimates on historical experience and on various other factors we believe are reasonable under the circumstances, the results of which form the basis for making judgments about the carrying value of assets and liabilities. Actual results could therefore differ materially from those estimates if actual conditions differ from our assumptions.

 

28


 

During the three months ended September 30, 2019, we considered our estimated corporate bonus accrual to be a critical accounting estimate. Our bonus accrual for each quarter is based on our performance against individual and defined corporate metrics: net revenue, adjusted EBITDA and gross orders to backlog. Our financial results are affected by the selection and application of accounting policies and methods. In the three months ended September 30, 2019, there were changes to the application of critical accounting policies previously disclosed in our most recent Annual Report on Form 10-K related to the adoption of Topic 842, Leases on July 1, 2019. There have been no other changes to the critical accounting policies and estimates, which we believe are those related to assessment of recoverability of goodwill and intangible assets, valuation of inventories, share-based compensation expense, income taxes, allowance for doubtful accounts and loss contingencies.

 

Concentration of Credit and Other Risks

 

Our cash and cash equivalents are deposited with several major financial institutions. At times, deposits in these institutions exceed the amount of insurance provided on such deposits. We have not experienced any losses in such accounts and do not believe that we are exposed to any significant risk of loss on these balances.

 

For the three months ended September 30, 2019 and 2018, there were one and no customers, respectively, that represented 10% or more of total net revenue. As of September 30, 2019, we had no customers that accounted for more than 10% of our total accounts receivable. We had one customer that accounted for more than 10% of our total accounts receivable, net as of September 30, 2019.

 

We perform ongoing credit evaluations of our customers and maintain reserves for potential credit losses. Accounts receivable are deemed past due in accordance with the contractual terms of the agreement. Accounts receivable balances are charged against the allowance for doubtful accounts once collection efforts are unsuccessful.

 

Single-source suppliers presently provide us with several components. In most cases, if a supplier was unable to deliver these components, we believe that we would be able to find other sources for these components subject to any regulatory qualifications, if required.

 

Revenue Recognition

 

Our revenue is primarily derived from sales of CyberKnife and TomoTherapy Systems and services, which include PCS, installation services, training and other professional services. We record our revenue net of any value added or sales tax. We recognize revenue for certain performance obligations at the point in time when control is transferred, such as delivery of products. We recognize revenue for certain other performance obligations over a period of time as control of the goods or services is transferred, such as PCS and construction contracts. Payments received in advance of system shipment are recorded as customer advances and are deferred until product shipment when they are recognized in revenue. We assess the probability of collection based on a number of factors, including past transaction history with the customer and credit-worthiness of the customer. We generally do not request collateral from our customers.

 

We frequently enter into sales arrangements that contain multiple elements or deliverables. For sale arrangements that contain multiple elements, we account for individual products and services separately if a product or service is separately identifiable from other items in the bundled package and if a customer can benefit from it on its own or with other resources that are readily available to the customer. The stand-alone selling price (“SSP”) is determined based on observable prices at which we separately sell the products and services. If an SSP is not directly observable, then we will estimate the SSP considering market conditions, entity-specific factors, and information about the customer or class of customer that is reasonably available.

 

Product Revenue

 

The majority of product revenue is generated from sales of CyberKnife and TomoTherapy Systems, including Radixact Systems. Revenue is recognized once the performance obligations are satisfied by transferring control of the product to a customer, which is generally upon delivery.

 

We record revenue from sales of systems, product upgrades and accessories to our customers based on the general terms and conditions of the executed sales and distribution agreements as well as the specific terms and conditions executed for each sale, and once the performance obligations are satisfied by transferring control of the product to a customer.

 

We record revenue considering all discounts given to, or expected by, customers. As a result, management may make estimates of potential future product returns or trade ins and other allowances related to product revenue in the current period. In general, we do not allow returns from customers and all discounts and allowances are clearly identified in the terms and conditions of each sale.

 

29


 

Service Revenue

 

Service revenue is generated primarily from PCS contracts (warranty period services and post warranty services), installation services, training and professional services. Service revenue is recognized either ratably over the contractual period as control and benefit transfer to the customer or when service is performed, depending on specific terms and conditions in agreements with customers.

 

Costs associated with service revenue are expensed when incurred, except when those costs are related to system upgrades purchased within a service contract. In those cases, the costs of such upgrades are recognized at the time the upgrade revenue is recognized.

 

Item 3.

Quantitative and Qualitative Disclosures About Market Risk

 

We do not utilize derivative financial instruments, derivative commodity instruments or other market risk sensitive instruments, positions or transactions.

 

Foreign Currency Exchange Rate Risk

 

A portion of our net sales are denominated in foreign currencies, most notably the Euro and the Japanese Yen. Future fluctuations in the value of the U.S. Dollar may affect the price competitiveness of our products outside the United States. For direct sales outside the United States, we sell in both U.S. Dollars and local currencies, which could expose us to additional foreign currency risks, including changes in currency exchange rates. Our operating expenses in countries outside the United States are payable in foreign currencies and therefore expose us to currency risk. To the extent that management can predict the timing of payments under sales contracts or for operating expenses that are denominated in foreign currencies, we may engage in hedging transactions to mitigate such risks in the future. We expect the changes in the fair value of the net foreign currency assets arising from fluctuations in foreign currency exchange rates to be materially offset by the changes in the fair value of the forward contracts. As of September 30, 2018, we had no open forward contracts and all open positions had been settled.

 

The purpose of these forward contracts is to minimize the risk associated with foreign exchange rate fluctuations. We have developed a foreign exchange policy to govern our forward contracts. These foreign currency forward contracts do not qualify as cash flow hedges and all changes in fair value are reported in earnings as part of other expenses, net. We have not entered into any other types of derivative financial instruments for trading or speculative purpose. Our foreign currency forward contract valuation inputs are based on quoted prices and quoted pricing intervals from public data and do not involve management judgment.

 

Interest Rate Risk

 

We maintain an investment portfolio of various holdings, types and maturities. These securities are generally classified as available for sale and consequently, are recorded on the balance sheet at fair value with unrealized gains and losses reported as a separate component of accumulated other comprehensive income. At any time, a sharp rise or decline in interest rates could have a material adverse impact on the fair value of our investment portfolio. Likewise, increases and decreases in interest rates could have a material impact on interest earnings for our portfolio. We do not currently carry investments that are sensitive to interest rate risk.

Our debt obligations consist of a variety of financial instruments that expose us to interest rate risk, including, but not limited to the Credit Facilities and the Notes. The interest rates on the Notes are fixed and the interest rate on the Credit Facilities are at variable rates, which are tied to a “prime rate” and LIBOR. As of September 30, 2019, borrowings under the Term Loan totaled $89.1 million with an annual interest rate of 6.75% plus 90-day LIBOR, and borrowings under the Revolving Credit Facility totaled $31.2 million with an annual interest rate of 4.50% plus 90-day LIBOR. If the amount outstanding under the Credit Facilities remained at this level for the next 12 months and interest rates increased or decreased by 50 basis point change, our annual interest expense would increase or decrease, respectively, approximately $0.6 million. Refer to Note 10. Debt to our unaudited condensed consolidated financial statements included in this Quarterly Report on Form 10-Q for a discussion regarding our debt obligations.

 

Equity Price Risk

 

In August 2017, we issued approximately $85.0 million aggregate principal amount of 3.75% Convertible Notes. Upon conversion, we can settle the obligation by issuing our common stock, cash or a combination thereof at an initial conversion rate equal to 174.8252 shares of common stock per $1,000 principal amount of the 3.75% Convertible Notes, which is equivalent to a conversion price of approximately $5.72 per share of common stock, subject to adjustment. There is no equity price risk if the share price of our common stock is below $5.72 upon conversion of the 3.75% Convertible Notes. For every $1 that the share price of our common stock exceeds $5.72, we expect to issue an additional $14.9 million in cash or shares of our common stock, or a combination thereof, if all of the 3.75% Convertible Notes are converted.

 

30


 

Item 4.

Controls and Procedures

 

Evaluation of Disclosure Controls and Procedures

 

We maintain disclosure controls and procedures that are designed to ensure that information required to be disclosed in our Exchange Act reports is recorded, processed, summarized and reported within the time periods specified in the Securities and Exchange Commission’s rules and forms and that such information is accumulated and communicated to our management, including our Chief Executive Officer and Chief Financial Officer, as appropriate to allow for timely decisions regarding required disclosure.

 

Our management, with the participation of our Chief Executive Officer and Chief Financial Officer, evaluated the effectiveness of the design and operation of our disclosure controls and procedures as of September 30, 2019. Based on this evaluation, our Chief Executive Officer and Chief Financial Officer concluded that as of September 30, 2019 our disclosure controls and procedures were effective to provide reasonable assurance that the information required to be disclosed by us in the reports we file or submit under the Exchange Act is recorded, processed, summarized and reported within the time periods specified in the Securities and Exchange Commission’s rules and forms, and that such information is accumulated and communicated to our management, including our Chief Executive Officer and Chief Financial Officer, as appropriate to allow timely decisions regarding required disclosure.

 

Changes in Internal Control Over Financial Reporting

 

There were no significant changes in our internal control over financial reporting that occurred during the first quarter of fiscal year 2020 that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.

 

Inherent Limitations of Internal Control Over Financial Reporting

 

Internal control over financial reporting cannot provide absolute assurance of achieving financial reporting objectives because of its inherent limitations. Internal control over financial reporting is a process that involves human diligence and compliance and is subject to lapses in judgment and breakdowns resulting from human failures. Internal control over financial reporting also can be circumvented by collusion or improper management override. Because of such limitations, there is a risk that material misstatements may not be prevented or detected on a timely basis by internal control over financial reporting. However, these inherent limitations are known features of the financial reporting process. Therefore, it is possible to design into the process safeguards to reduce, though not eliminate, this risk. In designing and evaluating the disclosure controls and procedures, management recognized that any controls and procedures, no matter how well designed and operated, can provide only reasonable assurance of achieving the desired control objectives, and in reaching a reasonable level of assurance, management is required to apply its judgment in evaluating the cost-benefit relationship of possible controls and procedures.

 

31


 

PART II.  OTHER INFORMATION

Item 1.

Legal Proceedings

The information set forth in Note 9. Commitments and Contingencies—Litigation, to our unaudited condensed consolidated financial statements included in this Quarterly Report on Form 10-Q is incorporated herein by reference.

Item 1A.

Risk Factors

We operate in a rapidly changing environment that involves significant risks, a number of which are beyond our control. In addition to the other information contained in this Form 10‑Q, the following discussion highlights some of these risks and the possible impact of these factors on our business, financial condition and future results of operations. If any of the following risks actually occur, our business, financial condition or results of operations may be adversely impacted, causing the trading price of our common stock to decline. In addition, these risks and uncertainties may impact the “forward‑looking” statements described elsewhere in this Form 10‑Q and in the documents incorporated herein by reference. They could affect our actual results of operations, causing them to differ materially from those expressed in “forward‑ looking” statements.

Risks Related to Our Business

If the CyberKnife or TomoTherapy Systems do not achieve widespread market acceptance, we will not be able to generate the revenue necessary to support our business.

Achieving physician, patient, hospital administrator and third‑party payor acceptance of the CyberKnife and TomoTherapy Systems as preferred methods of tumor treatment is crucial to our continued success. Physicians will not begin to use or increase the use of the CyberKnife or TomoTherapy Systems unless they determine, based on experience, clinical data and other factors, that the CyberKnife and TomoTherapy Systems are safe and effective alternatives to traditional treatment methods. Further, physicians may be slow to adopt new or updated versions of our CyberKnife and TomoTherapy Systems because of the perceived liability risks arising from the use of new products and the uncertainty of reimbursement from third-party payors, particularly in light of ongoing health care reform initiatives and the evolving U.S. health care environment.

We often need to educate physicians about the use of stereotactic radiosurgery, image guided radiation therapy (IGRT) and adaptive radiation therapy, convince healthcare payors that the benefits of the CyberKnife and TomoTherapy Systems and their related treatment processes outweigh their costs, and help train qualified physicians in the skilled use of these systems. In addition, we also must educate prospective customers regarding the entire functionality of our radiation therapy systems and their relative benefits compared to alternative products and treatment methods. We must also increase awareness among potential patients, who are increasingly educated about treatment options and therefore impact adoption of new technologies by clinicians. We have expended and will continue to expend significant resources on marketing and educational efforts to create awareness of stereotactic radiosurgery and Robotic IMRT as well as adaptive radiation therapy and IGRT generally and to encourage the acceptance and adoption of our products for these technologies. We cannot be sure that our products will gain significant market acceptance among physicians, patients and healthcare payors, even if we spend significant time and expense on their education.

In addition, the CyberKnife and TomoTherapy Systems are major capital purchases, and purchase decisions are greatly influenced by hospital administrators who are subject to increasing pressures to reduce costs. These and other factors, including the following, may affect the rate and level of market acceptance of each of the CyberKnife and TomoTherapy Systems:

 

the CyberKnife and TomoTherapy Systems’ price relative to other products or competing treatments;

 

our ability to develop new products and enhancements and receive regulatory clearances and approval, if required, to products in a timely manner;

 

increased scrutiny by state boards when evaluating certificates of need requested by purchasing institutions;

 

perception by patients, physicians and other members of the healthcare community of the CyberKnife and TomoTherapy Systems’ safety, efficacy, efficiency and benefits compared to competing technologies or treatments;

 

willingness of physicians to adopt new techniques and the ability of physicians to acquire the skills necessary to operate the CyberKnife and TomoTherapy Systems;

32


 

 

extent of third‑party coverage and reimbursement rates, particularly from Medicare, for procedures using the CyberKnife and TomoTherapy Systems; and

 

development of new products and technologies by our competitors or new treatment alternatives.

If the CyberKnife or TomoTherapy Systems are unable to achieve or maintain market acceptance, new orders and sales of our systems would be adversely affected, our revenue levels would decrease and our business would be harmed.

Our ability to achieve profitability depends in part on maintaining or increasing our gross margins on product sales and services, which we may not be able to achieve.

As of September 30, 2019, we had an accumulated deficit of $494.9 million. We may incur net losses in the future, particularly as selling and marketing activities increase ahead of any expected revenue. Our ability to achieve and sustain long‑term profitability is largely dependent on our ability to successfully market and sell the CyberKnife and TomoTherapy Systems, control our costs, and effectively manage our growth. We cannot assure you that we will be able to achieve profitability and even if we do achieve profitability, we may not be able to sustain or increase profitability on a quarterly or annual basis. In the event we fail to achieve profitability, our stock price could decline.

Our ability to achieve profitability also depends on our ability to maintain or increase our gross margins on product sales and services. A number of factors may adversely impact such gross margins, including:

 

lower than expected manufacturing yields of high cost components leading to increased manufacturing costs;

 

low production volume which will result in high levels of overhead cost per unit of production;

 

our ability to recognize revenue from our sales and the timing of revenue recognition and revenue deferrals;

 

increased material or labor costs;

 

increased inventory costs and liabilities for excess inventory resulting from inventory held in excess of forecasted demand;

 

increased service or warranty costs or the failure to reduce service or warranty costs;

 

increased price competition;

 

variation in the margins across products installed in a particular period;

 

changes to U.S. and foreign trade policies, including enactments of tariffs on goods imported into the U.S. and any retaliatory tariffs imposed by other countries on U.S. goods, including our products; and

 

how well we execute on our strategic and operating plans.

If we are unable to maintain or increase our gross margins on product sales and service, our results of operations could be adversely impacted, we may not achieve profitability and our stock price could decline.

We have outstanding indebtedness in the form of our 3.75% Convertible Notes, Revolving Credit Facility and Term Loan and may incur other debt in the future, which may adversely affect our financial condition and future financial results.

In August 2017, we issued $85.0 million aggregate principal amount of our 3.75% Convertible Senior Notes due 2022 (the “3.75% Convertible Notes”). As our debt matures, we anticipate having to expend significant resources to either repay or refinance the 3.75% Convertible Notes. For example, in August 2017, in connection with the issuance of the 3.75% Convertible Notes, we (i) exchanged approximately $47.0 million aggregate principal amount of our then-outstanding 3.50% Convertible Senior Notes due 2018 and 3.50% Series A Convertible Senior Notes due 2018 (collectively, the “Existing Notes”) for $53.0 million aggregate principal amount of 3.75% Convertible Notes and (ii) repurchased approximately $28.0 million of Existing Notes. If we decide to refinance the 3.75% Convertible Notes in the future, we may be required to do so on different or less favorable terms or we may be unable to refinance the 3.75% Convertible Notes at all, both of which may adversely affect our financial condition.

33


 

In June 2017, we entered into a credit and security agreement that provided us with an initial revolving credit facility (the “Revolving Credit Facility”) of $52.0 million, which was amended in December 2017 to reduce the Revolving Credit Facility to $32.0 million. In December 2017, we also entered into a credit and security agreement that provides for an initial term loan of $40.0 million with a second tranche of $20.0 million available for draw until December 31, 2018 if specified conditions are met (the “Term Loan” and, together with the Revolving Credit Facility, the “Credit Facilities”). In July 2018, we further amended the credit and security agreements with respect to the Credit Facilities to provide for, among other things, adjustments to the fixed charge coverage ratio. The credit and security agreements with respect to the Credit Facilities were further amended in December 2018, to, among other things, provide a mechanism for determining an alternative interest rate to replace LIBOR for the Credit Facilities, allow the second tranche of the Term Loan to be drawn in two separate advances and extend the availability of the second tranche of the Term Loan from December 31, 2018 until September 30, 2019, all subject to certain specified conditions being met. A further amendment to the credit and security agreements for the Credit Facilities was made in May 2019 to, among other things, decrease the applicable margin for the Credit Facilities, extend the Commitment Expiry Date (as defined in the applicable credit and security agreement) to May 30, 2024, increase the second tranche commitment under the Term Loan by $461,166 and consolidate both tranches of the Term Loan into a single term loan. Such credit and security agreements were most recently amended in August 2019 to, among other things, (i) increase the term commitments by $25 million, (ii) increase the applicable margin for all term loans from 5.50% to 6.75%, (iii) modify the calculation of the prepayment fee and (iv) revise or add financial covenants, including the fixed charge coverage ratio, minimum net revenue, minimum consolidated cash balance and minimum consolidated domestic cash balance tests.

As of September 30, 2019, we had total consolidated liabilities of approximately $422.8 million; including long-term liability components of the 3.75% Convertible Notes of $73.6 million, and the Revolving Credit Facility of $31.2 million and the Term Loan of $83.6 million. Our existing and future levels of indebtedness could have important consequences to stockholders and note holders and may adversely affect our financial conditions and future financial results by, among other things:

 

affecting our ability to satisfy our obligations under the 3.75% Convertible Notes and Credit Facilities;

 

requiring a substantial portion of our cash flows from operations to be dedicated to interest and principal payments and may not be available for operations, working capital, capital expenditures, expansion, acquisitions or general corporate or other purposes;

 

impairing our ability to obtain additional financing in the future;

 

limiting our flexibility in planning for, or reacting to, changes in our business and industry; and

 

increasing our vulnerability to downturns in our business, our industry or the economy in general.

The credit and security agreements governing the Credit Facilities also includes certain restrictive covenants that limit, among other things, our ability and our subsidiaries’ ability to (i) incur indebtedness, (ii) incur liens on their property, (iii) pay dividends or make other distributions, (iv) sell their assets, (v) make certain loans or investments, (vi) merge or consolidate, (vii) voluntarily repay or prepay certain indebtedness and (viii) enter into transactions with affiliates, in each case subject to certain exceptions. In addition, the such agreements require us to meet certain financial covenants, including a fixed charge coverage ratio, minimum net revenue, minimum consolidated cash balance and minimum consolidated domestic cash balance tests, as defined in the applicable credit and security agreement governing the Credit Facilities. These restrictions could adversely affect our ability to finance our future operations or capital needs, withstand a future downturn in our business or the economy in general, engage in business activities, including future opportunities that may be in our interest, and plan for or react to market conditions or otherwise execute our business strategies. Our ability to comply with the covenants and other terms governing the Credit Facilities will depend in part on our future operating performance. If we fail to comply with such covenants and terms, we may be in default and the maturity of the related debt could be accelerated and become immediately due and payable. In addition, because our assets are pledged as a security under the Credit Facilities, if we are not able to cure any default or repay outstanding borrowings, our assets are subject to the risk of foreclosure by our lenders. From time to time to we may not be in compliance with such covenants or other terms governing the Credit Facilities and we may be required to obtain waivers or amendments to the applicable credit and security agreement from our lenders in order to maintain compliance and there can be no certainty that any such waiver or amendment will be available, or what the cost of such waiver or amendment, if obtained, would be. If we are unable to obtain necessary waivers and the debt under such credit facility is accelerated, we would be required to obtain replacement financing at prevailing market rates. Additionally, a default on indebtedness could result in a default under the terms of the indenture governing our 3.75% Convertible Notes. There is no guarantee that we would be able to satisfy our obligations if any of our indebtedness is accelerated.

34


 

Our operating results, including our quarterly orders, revenues and margins fluctuate from quarter to quarter and may be unpredictable, which may result in a decline in our stock price.

We have experienced and expect in the future to experience fluctuations in our operating results, including gross orders, revenues and margins, from period to period. Drivers of orders include the introduction and timing of new product or product enhancement announcements by us and our competitors, the timing of regulatory approvals, changes in price by us and our competitors as well as changes or anticipated changes in third‑party reimbursement amounts or policies applicable to treatments using our products. The availability of economic stimulus packages or other government funding, or reductions thereof, may also affect timing of customer purchases. Our products have a high unit price and require significant capital expenditures by our customers. Accordingly, we experience long sales and implementation cycles, which is of greater concern during a volatile economic environment where we have had customers delay or cancel orders. The timing of when orders are placed, when installation, delivery or shipping, as applicable, is accomplished and when revenue is recognized affect our quarterly results. Further, because of the high unit price of the CyberKnife and TomoTherapy Systems and the relatively small number of units sold or installed each quarter, each sale or installation of a CyberKnife or TomoTherapy System can represent a significant percentage of our net orders, backlog or revenue for a particular quarter and shifts in sales or installation from one quarter to another may have significant effects. For example, multi-system sales or sales involving negotiations with integrated delivery networks involve additional complexities to the transaction and require a longer timeline to finalize the sale, which make it more difficult to predict the quarter in which the sale will occur.

Once orders are received and booked into backlog, there is a risk that we may not recognize revenue in the near term or at all. Factors that may affect whether these orders become revenue (or are cancelled or deemed aged‑out and reflected as a reduction in net orders) and the timing of revenue include:

 

economic or political instability in foreign countries;

 

delays in the customer obtaining or inability of a customer to obtain funding or financing;

 

delays in construction at the customer site and delays in installation;

 

delays in the customer obtaining or inability of such customer to obtain local or foreign regulatory approvals such as certificates of need in certain states or Class A or Class B user licenses in China;

 

timing of when we are able to recognize revenue associated with sales of the CyberKnife and TomoTherapy Systems, which varies depending upon the terms of the applicable sales and service contracts; and

 

the proportion of revenue attributable to orders placed by our distributors which may be more difficult to forecast due to factors outside our control.

Our operating results may also be affected by a number of other factors some of which are outside of our control, including:

 

the proportion of revenue attributable to our legacy service plans;

 

timing and level of expenditures associated with new product development activities;

 

regulatory requirements in some states for a certificate of need prior to the installation of a radiation device or foreign regulatory approvals, such as Class A or Class B user licenses in China;

 

delays in shipment due, for example, to unanticipated construction delays at customer locations where our products are to be installed, cancellations by customers, natural disasters or labor disturbances;

 

delays in our manufacturing processes or unexpected manufacturing difficulties;

 

the timing of the announcement, introduction and delivery of new products or product upgrades by us and by our competitors;

 

timing and level of expenditures associated with expansion of sales and marketing activities such as trade shows and our overall operations

 

the timing and level of expenditures associated with our financing activities;

 

the effects of foreign currency adjustments;

35


 

 

changes in accounting principles, such as those related to revenue recognition, or in the interpretation or the application thereof; and

 

fluctuations in our gross margins and the factors that contribute to such fluctuations, as described in Management’s Discussion and Analysis of Financial Condition and Results of Operations.

Because many of our operating expenses are based on anticipated sales and a high percentage of these expenses are fixed for the short term, a small variation in the timing of revenue recognition can cause significant variations in operating results from quarter to quarter. Our overall gross margins are impacted by a number of factors described in our risk factor entitled “Our ability to achieve profitability depends in part on maintaining or increasing our gross margins on product sales and services, which we may not be able to achieve.” If our financial results fall below the expectation of securities analysts and investors, the trading price of our common stock would almost certainly decline.

We report our orders and backlog on a quarterly and annual basis. Unlike revenues, orders and backlog are not defined by U.S. GAAP, and are not within the scope of the audit conducted by our independent registered public accounting firm. Also, for the reasons discussed in Management’s Discussion and Analysis of Financial Condition and Results of Operations, our orders and backlog cannot necessarily be relied upon as accurate predictors of future revenues. Order cancellation or significant delays in installation date will reduce our backlog and future revenues, and we cannot predict if or when orders will mature into revenues. Particularly high levels of cancellations or age‑outs in one or more periods may cause our revenue and gross margins to decline in current or future periods and will make it difficult to compare our operating results from quarter to quarter. We cannot assure you that our backlog will result in revenue on a timely basis or at all, or that any cancelled contracts will be replaced.

Our industry is subject to intense competition and rapid technological change, which may result in products or new tumor treatments that are superior to the CyberKnife and TomoTherapy Systems. If we are unable to anticipate or keep pace with changes in the marketplace and the direction of technological innovation and customer demands, our products may become obsolete or less useful and our operating results will suffer.

The medical device industry in general and the non‑invasive cancer treatment field in particular are subject to intense and increasing competition and rapidly evolving technologies. Because our products often have long development and government approval cycles, we must anticipate changes in the marketplace and the direction of technological innovation and customer demands. To compete successfully, we will need to continue to demonstrate the advantages of our products and technologies over well‑established alternative procedures, products and technologies, and convince physicians and other healthcare decision makers of the advantages of our products and technologies. Traditional surgery and other forms of minimally invasive procedures, brachytherapy, chemotherapy or other drugs remain alternatives to the CyberKnife and TomoTherapy Systems.

We consider the competition for the CyberKnife and TomoTherapy Systems to be existing radiation therapy systems, primarily using C‑arm linacs, which are sold by large, well‑capitalized companies with significantly greater market share and resources than we have. Several of these competitors are also able to leverage their fixed sales, service and other costs over multiple products or product lines. In particular, we compete with a number of existing radiation therapy equipment companies, including Varian Medical Systems, Inc. (“Varian”), Elekta AB (“Elekta”), BrainLAB AG and ViewRay, Inc. Varian has been the leader in the external beam radiation therapy market for many years and has the majority market share for radiation therapy systems worldwide. In general, because of aging demographics and attractive market factors in oncology, we believe that new competitors will enter the radiosurgery and radiation therapy markets in the years ahead. For example, Varian announced in 2012 a new line of C‑arm gantries, called the Edge systems, which Varian claims are specifically designed for radiosurgery to compete with our CyberKnife Systems. In addition, some manufacturers of conventional linac based radiation therapy systems, including Varian and Elekta, have products that can be used in combination with body and/or head frames and image guidance systems to perform both radiosurgical and radiotherapy procedures. In May 2017, Varian launched a new radiation therapy product called Halcyon which they have positioned against our TomoTherapy product line.

Furthermore, many government, academic and business entities are investing substantial resources in research and development of cancer treatments, including surgical approaches, radiation treatment, MRI‑guided radiotherapy systems, proton therapy systems, drug treatment, gene therapy (which is the treatment of disease by replacing, manipulating, or supplementing nonfunctional genes), and other approaches. Successful developments that result in new approaches for the treatment of cancer could reduce the attractiveness of our products or render them obsolete.

36


 

Our future success will depend in large part on our ability to establish and maintain a competitive position in current and future technologies. Rapid technological development may render the CyberKnife and TomoTherapy Systems and their technologies obsolete. Many of our competitors have or may have greater corporate, financial, operational, sales and marketing resources, and more experience and resources in research and development than we have. We cannot assure you that our competitors will not succeed in developing or marketing technologies or products that are more effective or commercially attractive than our products or that would render our technologies and products obsolete or less useful. We may not have the financial resources, technical expertise, marketing, distribution or support capabilities to compete successfully in the future. In addition, some of our competitors may compete by changing their pricing model or by lowering the price of their products. If we are unable to maintain or increase our selling prices, our revenue and gross margins may suffer. Our success will depend in large part on our ability to maintain a competitive position with our technologies.

International sales of our products account for a significant portion of our revenue, which exposes us to risks inherent in international operations.

Our international sales, as a percentage of total revenue, have increased over the last five fiscal years. The percentage of our revenue derived from sales outside of the Americas region was 68% in 2019, 64% in 2018, and 60% in 2017. To accommodate our international sales, we have invested significant financial and management resources to develop an international infrastructure that will meet the needs of our customers. We anticipate that a significant portion of our revenue will continue to be derived from sales of our products in foreign markets and that the percentage of our overall revenue that is derived from these markets may continue to increase. This revenue and related operations will therefore continue to be subject to the risks associated with international operations, including:

 

economic or political instability in foreign countries, including the market volatility resulting from the planned United Kingdom (the “UK”) exit from the European Union (the “EU”), or Brexit;

 

import delays;

 

changes in foreign regulatory laws governing, among other matters, the clearance, approval and sales of medical devices;

 

the potential failure to comply with foreign regulatory requirements to sell and market our products;

 

longer payment cycles associated with many customers outside the United States;

 

inability of customers to obtain requisite government approvals, such as customers in China, including customers of our recently announced joint venture, obtaining one of the limited number of Class A or Class B user licenses available in order to purchase our products;

 

effective compliance with privacy, data protection and information security laws, such as the European Union General Data Protection Regulation (“GDPR”);

 

adequate coverage and reimbursement for the CyberKnife and TomoTherapy treatment procedures outside the United States;

 

failure of local laws to provide the same degree of protection against infringement of our intellectual property;

 

protectionist laws and business practices that favor local competitors;

 

U.S. trade and economic sanctions policies that are in effect from time to time and the possibility that foreign countries may impose additional taxes, tariffs or other restrictions on foreign trade;

 

trade restrictions that are in effect from time to time, including U.S. prohibitions and restrictions on exports of certain products and technologies to certain nations and customers;

 

the unfamiliarity of shipping companies and other logistics providers with U.S. export control laws, which may lead to their unwillingness to ship or delays in shipping, our products to certain nations and customers despite such shipments being permitted under such laws;

 

U.S. relations with the governments of the foreign countries in which we operate;

 

the inability to obtain required export or import licenses or approvals;

37


 

 

risks relating to foreign currency, including fluctuations in foreign currency exchange rates possibly causing fewer sales due to the strengthening of the U.S. Dollar; and

 

contractual provisions governed by foreign laws.

Our inability to overcome these obstacles could harm our business, financial condition and operating results. Even if we are successful in managing these obstacles, our partners internationally are subject to these same risks and may not be able to manage these obstacles effectively.

In addition, future imposition of, or significant increases in, the level of customs duties, export quotas, regulatory restrictions, trade restrictions, or trade prohibitions could materially harm our business.

Enhanced international tariffs, including tariffs imposed by the United States and China that affect our products or components within our products, other trade barriers or a global trade war could increase our costs and materially and adversely affect our business operations and financial condition.

Our global business could be negatively affected by trade barriers and other governmental protectionist measures, any of which can be imposed suddenly and unpredictably. There is currently significant uncertainty about the future relationship between the U.S. and various other countries, most significantly China, with respect to trade policies, treaties, government regulations and tariffs.

Since the beginning of 2018, there has been increasing public threats and, in some cases, legislative or executive action, from U.S. and foreign leaders regarding instituting tariffs against foreign imports of certain materials. During the last half of calendar year 2018, the federal government imposed a series of tariffs ranging from 10% to 25% on a variety of imports from China. These tariffs affect certain components, including the linear accelerator for our CyberKnife Systems, which we manufacture in China and import into the U.S., as well as other components that we import into the U.S. from our suppliers. China has responded to these tariffs with retaliatory tariffs ranging from 5% to 25% on a wide range of products from the U.S., which include certain of our products. Higher duties on existing tariffs and further rounds of tariffs have been announced or threatened by the U.S. and Chinese leaders. Although China recently announced a one year tariff exemption for medical linear accelerators in September 2019, there is no assurance that the exemption will continue beyond one year or that we will continue to qualify for such exemption. Additionally, the U.S. has threatened to impose tariffs on goods imported from other countries, which could also impact our or our customers’ operations. If these tariffs continue, if additional tariffs are placed on certain of our components or products, or if any related counter-measures are taken by China, the U.S. or other countries, our business, financial condition and results of operations may be materially harmed. The imposition of tariffs could also increase our costs and require us to raise prices on our products, which may negatively impact the demand for our products in the affected market. If we are not successful in offsetting the impact of any such tariffs, our revenue, gross margins and operating results may be adversely affected.

These tariffs are subject to a number of uncertainties as they are implemented, including future adjustments and changes. The ultimate reaction of other countries and the impact of these tariffs or other actions on the U.S., China, the global economy and our business, financial condition and results of operations, cannot be predicted at this time, nor can we predict the impact of any other developments with respect to global trade. Further, the imposition of additional tariffs by the U.S. could result in the adoption of additional tariffs by China and other countries, as well as further retaliatory actions by any affected country. Any resulting trade war could negatively impact the global market for medical devices, including radiation therapy devices, and could have a significant adverse effect on our business. These developments may have a material adverse effect on global economic conditions and the stability of global financial markets, and they may significantly reduce global trade and, in particular, trade between China and the U.S. Any of these factors could depress economic activity, restrict our access to customers and have a material adverse effect on our business, financial condition and results of operations.

We face risks related to the current global economic environment, which could adversely affect our business, financial condition and results of operations by, among other things, delaying or preventing our customers from obtaining financing to purchase the CyberKnife and TomoTherapy Systems and implement the required facilities to house our systems.

Our business and results of operations are materially affected by conditions in the global markets and the economy generally. Concerns over the economic stability, the level of U.S. national debt, currency fluctuations and volatility, the rate of growth of Japan, China, and other Asian economies, unemployment, the availability and cost of credit, inflation levels, trade relations, energy costs and geopolitical uncertainty have contributed to increased volatility and diminished expectations for the economy and the markets.

38


 

Further, the U.S. federal government has called for, or enacted, substantial changes to healthcare, trade, fiscal, and tax policies, which may include changes to existing trade agreements and may have a significant impact on our operations. For example, the current administration has initiated the imposition of tariffs on certain foreign products, including from China, that have resulted in and may result in future retaliatory tariffs on U.S. goods and products. We cannot predict the impact, if any, that these changes could have on our business. If economic conditions worsen or new legislation is passed related to the healthcare system, trade, fiscal or tax policies, customer demand may not materialize to levels we require to achieve our anticipated financial results, which could have a material adverse effect on our business, financial condition and results of operations.

Additionally, uncertain credit markets and concerns regarding the availability of credit could impact consumer and customer demand for our products, as well as our ability to manage normal commercial relationships with our customers, suppliers and creditors, including financial institutions. If the current situation continues to deteriorate or does not improve, our business could be negatively affected by factors such as reduced demand for our products resulting from a slow‑down or volatility in the general economy, supplier or customer disruptions and/or temporary interruptions in our ability to conduct day‑to‑day transactions through our financial intermediaries involving the payment to or collection of funds from our customers, vendors and suppliers. For example, in the United States, some of our customers have been delayed in obtaining, or have not been able to obtain, necessary financing for their purchases of the CyberKnife or TomoTherapy Systems. In addition, some of our customers have been delayed in obtaining, or have not been able to obtain, necessary financing for the construction or renovation of facilities to house CyberKnife or TomoTherapy Systems, the cost of which can be substantial. These delays have in some instances led to our customers postponing the shipment and installation of previously ordered systems or cancelling their system orders, and may cause other customers to postpone their system installation or to cancel their agreements with us. An increase in delays and order cancellations of this nature would adversely affect our product sales, backlog and revenues, and therefore harm our business and results of operations. In addition, the recent approval by voters in the UK of a referendum to leave the EU (often referred to as Brexit), and the ongoing uncertainty regarding the results of Brexit, has caused, and may continue to cause, uncertainty in the global markets. The risks related to Brexit are discussed in more detail in our risk factor entitled “The decision of the United Kingdom to withdraw from the European Union may have a negative effect on global economic conditions, financial markets and our operations.”

The decision of the United Kingdom to withdraw from the European Union may have a negative effect on global economic conditions, financial markets and our operations.

In June 2016, a majority of voters in the UK voted in favor of Brexit in a national referendum. As of the date of this filing, the British Parliament has not agreed upon the terms of the withdrawal. The leaders of the other member countries of the European Union agreed to extend the deadline for Brexit until October 31, 2019, which was recently further extended until January 31, 2020. The referendum and ongoing negotiations have created significant uncertainty about the future relationship between the UK and the EU.

The pending implementation of Brexit has caused, and may continue to cause, uncertainty in the global markets. The effects of Brexit will also depend on any agreements the UK reaches to retain access to EU markets either during a transitional period or more permanently. There is significant uncertainty about the future relationship between the UK and the EU, including with respect to the laws and regulations that will apply as the UK determines which EU laws to replace or replicate in the event of a withdrawal, including those governing manufacturing, labor, environmental, data protection/privacy, competition, medical sales and advertising and other matters applicable to the medical device industry. If the UK leaves the EU with no agreement, it will likely have an adverse impact on labor and trade and will create further short-term currency volatility. In the absence of a future trade deal, the UK’s trade with the EU and the rest of the world would be subject to tariffs and duties set by the World Trade Organization, which could result in higher importation costs for our products. In addition, the movement of goods between the UK and the remaining member states of the EU will be subject to additional inspections and documentation checks, leading to possible delays at ports of entry and departure. Moreover, currency volatility could drive a weaker pound which could result in a decrease in the profitability of our sales in the UK. Any adjustments we make to our business and operations as a result of Brexit could result in significant expense and take significant time to complete.

While we have not experienced any material financial impact from Brexit on sales within the UK to date, we cannot predict its future implications. If implemented, Brexit will take some period of time to complete and could result in changes that impact our business, including potentially requiring us to obtain new registrations for our products that are sold into the UK. Any impact from Brexit on our business and operations over the long term will depend, in part, on the outcome of tariff, tax treaties, trade, regulatory and other negotiations the UK conducts. We continue to monitor and review the impact of any resulting changes to EU or UK law that could affect our operations.

39


 

If we encounter manufacturing problems, or if our manufacturing facilities do not continue to meet federal, state or foreign manufacturing standards, we may be required to temporarily cease all or part of our manufacturing operations, which would result in delays and lost revenue.

The CyberKnife and TomoTherapy Systems are complex and require the integration of a number of components from several sources of supply. We must manufacture and assemble these complex systems in commercial quantities in compliance with regulatory requirements and at an acceptable cost. Our linear accelerator components are extremely complex devices and require significant expertise to manufacture, and we may encounter difficulties in scaling up production of the CyberKnife or TomoTherapy Systems, including problems with quality control and assurance, component supply shortages, increased costs, shortages of qualified personnel, the long lead time required to develop additional radiation‑shielded facilities for purposes of testing our products and/or difficulties associated with compliance with local, state, federal and foreign regulatory requirements. If our manufacturing capacity does not keep pace with product demand, we will not be able to fulfill orders in a timely manner, which in turn may have a negative effect on our financial results and overall business. Conversely, if demand for our products decreases, the fixed costs associated with excess manufacturing capacity may adversely affect our financial results.

Our manufacturing processes and the manufacturing processes of our third‑party suppliers are required to comply with the FDA’s Quality System Regulations (“QSR”) for any products imported into, or sold within, the U.S. The QSR is a complex regulatory scheme that covers the methods and documentation of the design, testing, production process and controls, manufacturing, labeling, quality assurance, packaging, storage and shipping of our products. Furthermore, we are required to verify that our suppliers maintain facilities, procedures and operations that comply with our quality requirements. We are also subject to state licensing and other requirements and licenses applicable to manufacturers of medical devices, and we are required to comply with International Organization for Standardization (“ISO”), quality system standards in order to produce products for sale in Europe and Canada, as well as various other foreign laws and regulations. Because our manufacturing processes include the production of diagnostic and therapeutic X‑ray equipment and laser equipment, we are subject to the electronic product radiation control provisions of the Federal Food, Drug and Cosmetic Act, which requires that we file reports with the FDA, applicable states and our customers regarding the distribution, manufacturing and installation of these types of equipment. The FDA enforces the QSR and the electronic product radiation control provisions through periodic inspections, some of which may be unannounced. We have been, and anticipate in the future being subject to such inspections. FDA inspections usually occur every two to three years. During such inspections, the FDA may issue Inspectional Observations on Form FDA 483, listing instances where the manufacturer has failed to comply with applicable regulations and procedures, or warning letters.

If a manufacturer does not adequately address the observations, the FDA may take enforcement action against the manufacturer, including the imposition of fines, restriction of the ability to export product, total shutdown of production facilities and criminal prosecution. If we or a third‑party supplier receive a Form FDA 483 with material or major observations that are not promptly corrected, fail to pass a QSR inspection, or fail to comply with these, ISO and other applicable regulatory requirements, our operations could be disrupted and our ability to generate sales could be delayed. Our failure to take prompt and satisfactory corrective action in response to an adverse inspection or our failure to comply with applicable standards could result in enforcement actions, including a public warning letter, a shutdown of our manufacturing operations, a recall of our products, civil or criminal penalties, or other sanctions, which would cause our sales and business to suffer. In addition, because some foreign regulatory approvals are based on approvals or clearances from the FDA, any failure to comply with FDA requirements may also disrupt our sales of products in other countries. We cannot assure you that the FDA or other governmental authorities would agree with our interpretation of applicable regulatory requirements or that we or our third‑party suppliers have in all instances fully complied with all applicable requirements. If any of these events occur, our reputation could be harmed, we could lose customers and there could be a material adverse effect on our business, financial condition and results of operations.

If we cannot achieve the required level and quality of production, we may need to outsource production or rely on licensing and other arrangements with third parties who possess sufficient manufacturing facilities and capabilities in compliance with regulatory requirements. Even if we could outsource needed production or enter into licensing or other third‑party arrangements, this could reduce our gross margin and expose us to the risks inherent in relying on others. We also cannot assure you that our suppliers will deliver an adequate supply of required components on a timely basis or that they will adequately comply with the QSR. Failure to obtain these components on a timely basis would disrupt our manufacturing processes and increase our costs, which would harm our operating results.

40


 

If we are unable to develop new products or enhance existing products to meet our customers’ needs and compete favorably in the market, we may be unable to attract or retain customers.

Our success depends on the successful development, regulatory clearance or approval, introduction and commercialization of new generations of products, treatment systems, and enhancements to and/or simplification of existing products that will meet our customers’ needs provide novel features and compete favorably in the market. The CyberKnife and TomoTherapy Systems, which are currently our principal products, are technologically complex and must keep pace with, among other things, the products of our competitors and new technologies. We are making significant investments in long‑term growth initiatives. Such initiatives require significant capital commitments, involvement of senior management and other investments on our part, which we may be unable to recover. Our timeline for the development of new products or enhancements may not be achieved and price and profitability targets may not prove feasible. Commercialization of new products may prove challenging, and we may be required to invest more time and money than expected to successfully introduce them. Once introduced, new products may adversely impact orders and sales of our existing products, or make them less desirable or even obsolete. Compliance with regulations, competitive alternatives, and shifting market preferences may also impact the successful implementation of new products or enhancements. Our inability to develop, gain regulatory approval for or supply competitive products to the market as quickly and effectively as our competitors could limit market acceptance of our products and reduce our sales.

Our ability to successfully develop and introduce new products, treatment systems and product enhancements and simplifications, and the revenues and costs associated with these efforts, will be affected by our ability to:

 

properly identify and address customer needs;

 

prove feasibility of new products in a timely manner;

 

educate physicians about the use of new products and procedures;

 

comply with internal quality assurance systems and processes timely and efficiently;

 

manage the timing and cost of obtaining regulatory approvals or clearances;

 

accurately predict and control costs associated with inventory overruns caused by phase‑in of new products and phase‑out of old products;

 

price new products competitively;

 

manufacture and deliver our products in sufficient volumes on time and accurately predict and control costs associated with manufacturing, installation, warranty and maintenance of the products;

 

meet our product development plan and launch timelines;

 

improve manufacturing yields of components; and

 

manage customer demands for retrofits of both old and new products.

Even if customers accept new products or product enhancements, the revenues from these products may not be sufficient to offset the significant costs associated with making them available to customers.

We cannot be sure that we will be able to successfully develop, obtain regulatory approval or clearance for, manufacture or introduce new products, treatment systems or enhancements, the roll‑out of which involves compliance with complex quality assurance processes, including QSR. Failure to obtain regulatory approval or clearance for our products or to complete these processes in a timely and efficient manner could result in delays that could affect our ability to attract and retain customers, or could cause customers to delay or cancel orders, causing our backlog, revenues and operating results to suffer.

41


 

If we do not effectively manage our growth, our business may be significantly harmed.

In order to implement our business strategy, we expect continued growth in our infrastructure requirements, particularly as we expand into new and growing markets as well as expand our manufacturing capacities and sales and marketing capabilities. To manage our growth, we must expand our facilities, augment our management, operational and financial systems, hire and train additional qualified personnel, scale‑up our manufacturing capacity and expand our marketing and distribution capabilities. Our manufacturing, assembly and installation process is complex and occurs over many months and we must effectively scale this entire process to satisfy customer expectations and changes in demand. Further, to accommodate our growth and compete effectively, we will be required to make improvements to our business operations. We cannot be certain that our personnel, systems, procedures and internal controls will be adequate to support our future operations and any expansion of our systems and infrastructure may require us to commit significant additional financial, operational and management resources. If we cannot manage our growth effectively, our business will suffer.

We could become subject to product liability claims, product recalls, other field actions and warranty claims that could be expensive, divert management’s attention and harm our business.

Our business exposes us to potential liability risks that are inherent in the manufacturing, marketing, sale, installation, servicing, and support of medical device products. We may be held liable if a CyberKnife or TomoTherapy System or our Precision Treatment Planning or iDMS Data Management System software causes injury or death or is found otherwise unsuitable during usage. Our products incorporate sophisticated components and computer software. Complex software can contain errors, particularly when first introduced. In addition, new products or enhancements may contain undetected errors or performance problems that, despite testing, are discovered only after installation. Because our products are designed to be used to perform complex surgical and therapeutic procedures involving delivery of radiation to the body, defects, even if small, could result in a number of complications, some of which could be serious and could harm or kill patients. Any alleged weaknesses in physician training and services associated with our products may result in unsatisfactory patient outcomes and product liability lawsuits. It is also possible that defects in the design, manufacture or labeling of our products might necessitate a product recall or other field corrective action, which may result in warranty claims beyond our expectations and may harm our reputation and create adverse publicity. A product liability claim, regardless of its merit or eventual outcome, could result in significant legal defense costs that may not be covered by insurance and be time-consuming to defend. We may also be subject to claims for personal injury, property damage or economic loss related to, or resulting from, any errors or defects in our products, or the installation, servicing and support of our products, or any professional services rendered in conjunction with our products. Adverse publicity related to any product liability actions may cause patients to be less receptive to radiation therapy generally or our products specifically and could also result in additional regulation that could adversely affect our ability to promote, manufacture and sell our products. The coverage limits of our insurance policies may not be adequate to cover future claims. If sales of our products increase or we suffer future product liability claims, we may be unable to maintain product liability insurance in the future at satisfactory rates or with adequate amounts of coverage. A product liability claim, any product recalls or other field actions or excessive warranty claims, whether arising from defects in design or manufacture or labeling, could negatively affect our sales or require a change in the design, manufacturing process or the indications for which our systems or software may be used, any of which could harm our reputation and business and result in a decline in revenue.

In addition, if a product we designed or manufactured is defective, whether because of design or manufacturing, supplied parts, or labeling defects, improper use of the product or other reasons, we may be required to notify regulatory authorities and/or to recall the product, possibly at our expense. We have voluntarily initiated recalls and product corrections in the past, including one recall for the TomoTherapy System in fiscal year 2018 that has been requested for closure with the FDA. In fiscal year 2019, we have voluntarily opened three recalls involving the CyberKnife System. As of September 30, 2019, we have completed all three recalls from fiscal year 2019 with one such recall having been closed with the FDA, and the remaining two having been requested for closure with the FDA and are still under FDA review. We are committed to the safety and precision of our products and while no serious adverse health consequences have been reported in connection with these recalls and the costs associated with each such recall were not material, we cannot ensure that the FDA will not require that we take additional actions to address problems that resulted in previous recalls or that similar or more significant product recalls will not occur in the future. A required notification of a correction or removal to a regulatory authority or recall could result in an investigation by regulatory authorities of our products, which could in turn result in required recalls, restrictions on the sale of the products or other civil or criminal penalties. The adverse publicity resulting from any of these actions could cause customers to review and potentially terminate their relationships with us. These investigations, corrections or recalls, especially if accompanied by unfavorable publicity, patient injury or termination of customer contracts, could result in incurring substantial costs, losing revenues and damaging our reputation, each of which would harm our business.

42


 

Our reliance on single‑source suppliers for critical components of the CyberKnife and TomoTherapy Systems could harm our ability to meet demand for our products in a timely and cost effective manner.

We currently depend on single‑source suppliers for some of the critical components necessary to assemble the CyberKnife and TomoTherapy Systems, including, with respect to the CyberKnife System, the robot, couch and magnetron and, with respect to the TomoTherapy Systems, the ring gantry, couch, solid state modulator and magnetron. If any single‑source supplier was to cease delivering components to us or fail to provide the components to our specifications and on a timely basis, we might be required to find alternative sources for these components. The disruption or termination of the supply of components could cause a significant increase in the costs of these components, which could affect our results of operations. In some cases, alternative suppliers may be located in the same geographic area as existing suppliers, and are thus subject to the same economic, political and geographic factors that may affect existing suppliers to meet our demand. We may have difficulty or be unable to find alternative sources for these components. As a result, we may be unable to meet the demand for the CyberKnife or TomoTherapy Systems, which could harm our ability to generate revenue and damage our reputation. Even if we do find alternate suppliers, we will be required to qualify any such alternate suppliers and we would likely experience a lengthy delay in our manufacturing processes or a cessation in production, which would result in delays of shipment to end users. We cannot assure you that our single‑source suppliers will be able or willing to meet our future demands.

We generally do not maintain large volumes of inventory, which makes us even more susceptible to harm if a single‑source supplier fails to deliver components on a timely basis. Furthermore, if we are required to change the manufacturer of a critical component of the CyberKnife or TomoTherapy Systems, we will be required to verify that the new manufacturer maintains facilities, procedures and operations that comply with our quality and applicable regulatory requirements and guidelines, which could further impede our ability to manufacture our products in a timely manner. If the change in manufacturer results in a significant change to the product, a new 510(k) clearance would be necessary, which would likely cause substantial delays. The disruption or termination of the supply of key components for the CyberKnife or TomoTherapy Systems could harm our ability to manufacture our products in a timely manner or within budget, harm our ability to generate revenue, lead to customer dissatisfaction and adversely affect our reputation and results of operations.

We depend on key employees, the loss of whom would adversely affect our business. If we fail to attract and retain employees with the expertise required for our business, we may be unable to continue to grow our business.

We are highly dependent on the members of our senior management, sales, marketing, operations and research and development staff. Our future success will depend in part on our ability to retain our key employees and to identify, hire and retain additional personnel. Competition for qualified personnel in the medical device industry is intense and finding and retaining qualified personnel with experience in our industry is very difficult. We believe there are only a limited number of individuals with the requisite skills to serve in many of our key positions and we face significant competition for key personnel and other employees, particularly in the San Francisco Bay Area where our headquarters is located, from other medical equipment and software manufacturers, technology companies, universities and research institutions. As a result, we may not be able to retain our existing employees or hire new employees quickly enough to meet our needs. Moreover, we have in the past conducted reductions in force in order to optimize our organizational structure and reduce costs, and certain senior personnel have also departed for various reasons. At the same time, we may face high turnover, requiring us to expend time and resources to source, train and integrate new employees. The challenging markets in which we compete for talent may also require us to invest significant amounts of cash and equity to attract and retain employees. In addition, a significant portion of our compensation to our key employees is in the form of stock related grants. A prolonged depression in our stock price could make it difficult for us to retain our key and other employees and recruit additional qualified personnel and we may have to pay additional compensation to employees to incentivize them to join or stay with us. We do not maintain, and do not currently intend to obtain, key employee life insurance on any of our personnel. If we fail to hire and retain key personnel and other employees, we may be unable to continue to grow our business successfully.

Disruption of critical information technology systems, infrastructure and data could harm our business and financial condition.

Information technology helps us operate more efficiently, interface with customers, maintain financial accuracy and efficiency and accurately produce our financial statements. If we do not allocate and effectively manage the resources necessary to build, sustain and secure the proper technology infrastructure, we could be subject to transaction errors, processing inefficiencies, the loss of customers, business disruptions or the loss of or damage to intellectual property through a security breach. Such security breaches could expose us to a risk of loss of information, litigation and possible liability to employees, customers and regulatory authorities. In addition, we have moved some of our data and information to a cloud computing system, where applications and data are hosted, accessed and processed through a third‑party provider over a broadband internet connection. In a cloud computing environment, we could be subject to outages and security breaches by the third‑party service provider. If our data management systems do not effectively collect, store, process and report relevant data for the operation of our business, whether due to equipment malfunction or constraints, software deficiencies, computer viruses, security breaches, catastrophic events or human error, our ability to effectively plan, forecast and execute our

43


 

business plan and comply with applicable laws and regulations will be impaired, perhaps materially. Any such impairment could materially and adversely affect our financial condition, results of operations, cash flows and the timeliness with which we internally and externally report our operating results. As a result, our information systems require an ongoing commitment of significant resources to maintain, protect, and enhance existing systems and develop new systems to keep pace with continuing changes in information processing technology, evolving legal and regulatory standards, the increasing need to protect patient and customer information, and the information technology needs associated with our changing products and services. There can be no assurance that our process of consolidating the number of systems we operate, upgrading and expanding our information systems capabilities, continuing to build security into the design of our products, protecting and enhancing our systems and developing new systems to keep pace with continuing changes in information processing technology will be successful or that additional systems issues will not arise in the future.

In addition, data privacy breaches from errors, malfeasance or misconduct by employees, contractors or others with permitted access to our systems may pose a risk that sensitive data, including individually identifiable data, may be exposed to unauthorized person or to the public and compromise our security systems. There can be no assurance that any efforts we make to prevent against such privacy breaches will prevent breakdowns or breaches in our systems that could adversely affect our business. Third-parties may also attempt to fraudulently induce employees or customers into disclosing user names, passwords or other sensitive information, which may in turn be used to access our information technology systems. For example, our employees have received “phishing” e-mails attempting to induce them to divulge sensitive information. In addition, unauthorized persons may attempt to hack into our products or systems to obtain personal data relating to patients or employees, our confidential or proprietary information or confidential information we hold on behalf of third-parties, which, if successful, could pose a risk of loss of data, risk to patient safety and risk of product recall. As the techniques used to obtain unauthorized access to our systems change frequently and may be difficult to detect, we may not be able to anticipate and prevent these intrusions or mitigate them when they occur. Moreover, we manufacture and sell hardware and software products that allow our customers to store confidential information about their patients. Both types of products are often connected to and reside within our customers’ information technology infrastructures. We do not have measures to secure our customers’ equipment or any information stored in our customers’ systems or at their locations, which is the responsibility of our customers. While we have implemented security measures to protect our hardware and software products from unauthorized access, these measures may not be effective in securing these products, particularly since techniques used to obtain unauthorized access, or to sabotage systems, change frequently and generally are not recognized until launched against a target. A breach of network security and systems or other events that cause the loss or public disclosure of, or access by third-parties to, sensitive information stored by us or our customers could have serious negative consequences for our business, including loss of information, indemnity obligations, possible fines, penalties and damages, reduced demand for our products and services, an unwillingness of our customers to use our products or services, harm to our reputation and brand, and time‑consuming and expensive litigation, any of which could have an adverse effect on our financial results.

Any actual or perceived failure by us to comply with legal or regulatory requirements related to privacy or data security in one or multiple jurisdictions could result in proceedings, actions or penalties against us.

There are numerous state, federal and foreign laws, regulations, decisions and directives regarding privacy and the collection, storage, transmission, use, processing, disclosure and protection of personally identifiable information and other personal, customer or other data, the scope of which is continually evolving and subject to differing interpretations. Our worldwide operations mean that we are subject to data protection and cyber security laws and regulations in many jurisdictions, and that some of the data we process, store and transmit may be transmitted across countries. For example, in the U.S., Health Insurance Portability and Accountability Act (“HIPAA”) privacy and security rules require us as a business associate to protect the confidentiality of patient health information, and the Federal Trade Commission has begun to assert authority over protection of privacy and the use of cyber security in information systems. In Europe, the General Data Protection Regulation (“GDPR”), which went into effect in May 2018, imposes several stringent requirements for controllers and processors of personal data that will increase our obligations and, in the event of violations, may impose significant fines of up to the greater of 4% of worldwide annual revenue or €20 million. In the UK, a Data Protection Bill that substantially implements the GDPR became law in May 2018. China and Russia have also passed laws that require individually identifiable data on their citizens to be maintained on local servers and that may restrict transfer or processing of that data. Further, in June 2018, California passed the California Consumer Privacy Act of 2018 (“CCPA”), which will become effective on January 1, 2020. CCPA imposes stringent data privacy and data protection requirements for the data of California residents, and provides for penalties for noncompliance of up to $7,500 per violation. The restrictions imposed by these laws and regulations may limit the use and adoption of our products, reduce overall demand for our products, require us to modify our data handling practices and impose additional costs and burdens. In addition, U.S. and international laws that have been applied to protect user privacy (including laws regarding unfair and deceptive practices in the U.S. and GDPR in the EU) may be subject to evolving interpretations or applications in light of privacy developments. As a result, we may be subject to significant consequences, including penalties and fines, for any failure to comply with such laws, regulations and directives.

44


 

Data protection legislation around the world is comprehensive and complex and there has been a recent trend towards more stringent enforcement of requirements regarding protection and confidentiality of personal data. The restrictions imposed by such laws and regulations may limit the use and adoption of our products and services, reduce overall demand for our products and services, require us to modify our data handling practices, and impose additional costs and burdens. With increasing enforcement of privacy, data protection and cyber security laws and regulations, there is no guarantee that we will not be subject to enforcement actions by governmental bodies or that our costs of compliance will not increase significantly. Enforcement actions can be costly and interrupt regular operations of our business. In addition, there has been a developing trend of civil lawsuits and class actions relating to breaches of consumer data held by large companies. While we have not been named in any such suits, if a substantial breach or loss of data from our records were to occur, we could become a target of such litigation. Any inability to adequately address privacy and security concerns, even if unfounded, or comply with applicable laws, regulations, policies, industry standards, contractual obligations, or other legal obligations could result in additional cost and liability to us, damage our reputation, inhibit sales, and adversely affect our business. Our failure to comply with applicable laws and regulations could result in enforcement action against us, including fines and public censure, claims for damages by customers and other affected individuals, damage to our reputation and loss of goodwill (both in relation to existing customers and prospective customers), any of which could harm our business, results of operations and financial condition.

If third‑party payors do not provide sufficient coverage and reimbursement to healthcare providers for use of the CyberKnife and TomoTherapy Systems, demand for our products and our revenue could be adversely affected.

Our customers rely significantly on reimbursement from public and private third‑party payors for CyberKnife and TomoTherapy systems procedures. Our ability to commercialize our products successfully and increase market acceptance of our products will depend in significant part on the extent to which public and private third‑party payors provide adequate coverage and reimbursement for procedures that are performed with our products. Third‑party payors may establish or change the reimbursement for medical products and services that could significantly influence the purchase of medical products and services. If reimbursement policies or other cost containment measures are instituted in a manner that significantly reduces the coverage or payment for the procedures that are performed with our products, our revenue may decline, our existing customers may not continue using our products or may decrease their use of our products, and we may have difficulty obtaining new customers. Such actions would likely have a material adverse effect on our operating results.

Centers for Medicare and Medicaid Services (“CMS”) reviews reimbursement rates annually and may implement significant changes in future years, which could discourage existing and potential customers from purchasing or using our products. Further, outside of the U.S., reimbursement practices vary significantly by country. Market acceptance of our products may depend on the availability and level of coverage and reimbursement in any country within a particular time.

The safety and efficacy of our products for certain uses is not yet supported by long‑term clinical data, and our products may therefore prove to be less safe and effective than initially thought.

Although we believe that the CyberKnife and TomoTherapy Systems have advantages over competing products and technologies, we do not have sufficient clinical data demonstrating these advantages for all tumor indications. In addition, we have only limited five‑year patient survival rate data, which is a common long‑term measure of clinical effectiveness in cancer treatment. We also have limited clinical data directly comparing the effectiveness of the CyberKnife System to other competing systems. Future patient studies or clinical experience may indicate that treatment with the CyberKnife System does not improve patient survival or outcomes.

Likewise, because the TomoTherapy Systems have only been on the market since 2003, we have limited complication or patient survival rate data with respect to treatment using the systems. In addition, while the effectiveness of radiation therapy is well understood, there is a growing but still limited number of peer‑reviewed medical journal publications regarding the efficacy of highly conformal treatment such as that delivered by the TomoTherapy Systems. If future patient studies or clinical experience do not support our beliefs that the TomoTherapy Systems offer a more advantageous treatment for a wide variety of cancer types, use of the systems could fail to increase or could decrease, and our business would therefore be adversely affected.

Such results could reduce the rate of reimbursement by both public and private third‑party payors for procedures that are performed with our products, slow the adoption of our products by physicians, significantly reduce our ability to achieve expected revenues and could prevent us from becoming profitable. In addition, if future results and experience indicate that our products cause unexpected or serious complications or other unforeseen negative effects, the FDA could rescind our clearances, our reputation with physicians, patients and others may suffer and we could be subject to significant legal liability.

45


 

We rely on third parties to perform spare parts shipping and other logistics functions on our behalf. A failure or disruption at our logistics providers would adversely impact our business.

Customer service is a critical element of our sales strategy. Third‑party logistics providers store most of our spare parts inventory in depots around the world and perform a significant portion of our spare parts logistics and shipping activities. If any of our logistics providers terminates its relationship with us, suffers an interruption in its business, or experiences delays, disruptions or quality control problems in its operations, or we have to change and qualify alternative logistics providers for our spare parts, shipments of spare parts to our customers may be delayed and our reputation, business, financial condition and results of operations may be adversely affected.

Third parties may claim we are infringing their intellectual property, and we could suffer significant litigation or licensing expenses or be prevented from selling our product.

The medical device industry is characterized by a substantial amount of litigation over patent and other intellectual property rights. In particular, the field of radiation treatment of cancer is well established and crowded with the intellectual property of competitors and others. We also expect that other participants will enter the field. A number of companies in our market, as well as universities and research institutions, have issued patents and have filed patent applications which relate to the use of radiation therapy and stereotactic radiosurgery to treat cancerous and benign tumors.

Determining whether a product infringes a patent involves complex legal and factual issues, and the outcome of patent litigation actions is often uncertain. We have not conducted an extensive search of patents issued to third parties, and no assurance can be given that third‑party patents containing claims covering our products, parts of our products, technology or methods do not exist, have not been filed, or could not be filed or issued. Because of the number of patents issued and patent applications filed in our technical areas or fields, our competitors or other third parties may assert that our products and the methods we employ in the use of our products are covered by U.S. or foreign patents held by them.

In addition, because patent applications can take many years to issue and because publication schedules for pending applications vary by jurisdiction, there may be applications now pending of which we are unaware, and which may result in issued patents which our current or future products infringe. Also, because the claims of published patent applications can change between publication and patent grant, there may be published patent applications that may ultimately issue with claims that we infringe. There could also be existing patents that one or more of our products or parts may infringe and of which we are unaware. As the number of competitors in the market for less invasive cancer treatment alternatives grows, and as the number of patents issued in this area grows, the possibility of patent infringement claims against us increases. Regardless of the merit of infringement claims, they can be time‑consuming and result in costly litigation and diversion of technical and management personnel. Some of our competitors may be able to sustain the costs of complex patent litigation more effectively than we can because they have substantially greater resources. In addition, any uncertainties resulting from the initiation and continuation of any litigation could have a material adverse effect on our ability to raise funds, if necessary, to continue our operations.

In the event that we become subject to a patent infringement or other intellectual property lawsuit and if the relevant patents or other intellectual property were upheld as valid and enforceable and we were found to infringe or violate the terms of a license to which we are a party, we could be prevented from selling our products unless we obtain a license or are able to redesign the product to avoid infringement. Required licenses may not be made available to us on acceptable terms or at all. If we are unable to obtain a license or successfully redesign our system, we might be prevented from selling such system. If there is an allegation or determination that we have infringed the intellectual property rights of a competitor or other person, we may be required to pay damages, pay ongoing royalties or otherwise settle such matter upon terms that are unfavorable to us. In these circumstances, we may be unable to sell our products at competitive prices or at all, and our business and operating results could be harmed.

We may be subject to claims that our employees have wrongfully used or disclosed alleged trade secrets of their former employers.

As is common in the medical device industry, we employ individuals who were previously employed at other medical equipment or biotechnology companies, including our competitors or potential competitors. We may be subject to claims that we or those employees have inadvertently or otherwise used or disclosed trade secrets or other proprietary information of their former employers. Litigation may be necessary to defend against these claims. If we fail in defending any such claims, in addition to paying monetary damages, we may lose valuable intellectual property rights or personnel. Even if we are successful in defending against claims of this nature, litigation could result in substantial costs and be a distraction to management.

46


 

It is difficult and costly to protect our intellectual property and our proprietary technologies and we may not be able to ensure their protection.

Our success depends significantly on our ability to obtain, maintain and protect our proprietary rights to the technologies used in our products. Patents and other proprietary rights provide uncertain protections, and we may be unable to protect our intellectual property. For example, we may be unsuccessful in defending our patents and other proprietary rights against third‑party challenges. As key patents expire, our ability to prevent competitors from copying our technology may be limited. In addition, patent reform legislation or precedent could increase the uncertainties and costs surrounding the prosecution of our patent applications and the enforcement or defense of our issued patents.

In addition to patents, we rely on a combination of trade secrets, copyright and trademark laws, nondisclosure agreements and other contractual provisions and technical security measures to protect our intellectual property rights. These measures may not be adequate to safeguard the technology underlying our products. If these measures do not protect our rights adequately, third parties could use our technology, and our ability to compete in the market would be reduced. Although we have attempted to obtain patent coverage for our technology where available and appropriate, there are aspects of the technology for which patent coverage was never sought or never received. There also may be countries in which we sell or intend to sell the CyberKnife or TomoTherapy Systems but have no patents or pending patent applications. Our ability to prevent others from making or selling duplicate or similar technologies will be impaired in those countries in which we have no patent protection. Although we have several issued patents in the U.S. and in foreign countries protecting aspects of the CyberKnife and TomoTherapy Systems, our pending U.S. and foreign patent applications may not issue, may issue only with limited coverage or may issue and be subsequently successfully challenged by others and held invalid or unenforceable. In addition, many countries limit the enforceability of patents against certain third parties, including government agencies or government contractors. In these countries, patents may provide limited or no benefit. Patent protection must ultimately be sought on a country-by-country basis, which is an expensive and time consuming process with uncertain outcomes. Accordingly, we may choose not to seek patent protection in certain countries, and we will not have the benefit of patent protection in such countries.  

Similarly, our issued patents and those of our licensors may not provide us with any competitive advantages. Competitors may be able to design around our patents or develop products which provide outcomes comparable or superior to ours. Our patents may be held invalid or unenforceable as a result of legal challenges by third parties, and others may challenge the inventorship or ownership of our patents and pending patent applications. In addition, the laws of some foreign countries, such as China where our newly announced joint venture will operate, may not protect our intellectual property rights to the same extent as do the laws of the United States and, even if they do, uneven enforcement and procedural barriers may exist in such countries. In the event a competitor or other third party infringes upon our patent or other intellectual property rights or otherwise misappropriates such rights, enforcing those rights may be difficult and time consuming. Even if successful, litigation to enforce our intellectual property rights or to defend our patents against challenge could be expensive and time consuming and could divert our management’s attention from our core business. Damage awards resulting from successful litigation in foreign jurisdictions may not be in amounts commensurate with damage awards in the U.S. We may not have sufficient resources to enforce our intellectual property rights or to defend our patents against a challenge. In addition, we may not prevail in any lawsuits that we initiate, and the damages or other remedies awarded, if any, may not be commercially valuable. Litigation also puts our patents at risk of being invalidated or interpreted narrowly and our patent applications at risk of not issuing. Additionally, we may provoke third parties to assert claims against us.

We also license patent and other proprietary rights to aspects of our technology to third parties in fields where we currently do not operate as well as in fields where we currently do operate. Disputes with our licensees may arise regarding the scope and content of these licenses. Further, our ability to expand into additional fields with our technologies may be restricted by our existing licenses or licenses we may grant to third parties in the future.

Additionally, we have written agreements with collaborators regarding the ownership of intellectual property arising from our collaborations. These agreements generally provide that we must negotiate certain commercial rights with collaborators with respect to joint inventions or inventions made by our collaborators that arise from the results of the collaboration. In some instances, there may not be adequate written provisions to address clearly the resolution of intellectual property rights that may arise from a collaboration. If we cannot successfully negotiate sufficient ownership and commercial rights to the inventions that result from our use of a third-party collaborator’s materials where required, or if disputes otherwise arise with respect to the intellectual property developed with the use of a collaborator’s technology, we may be limited in our ability to utilize these intellectual property rights. In addition, we may face claims by third parties that our agreements with employees, contractors or consultants obligating them to assign intellectual property to us are ineffective or in conflict with prior or competing contractual obligations of assignment, which could result in ownership disputes regarding intellectual property we have developed or will develop and interfere with our ability to capture the commercial value of such intellectual property. Litigation may be necessary to resolve an ownership dispute, and if we are not successful, we may be precluded from using certain intellectual property or may lose our exclusive rights in that intellectual property. Either outcome could harm our business.

47


 

The policies and procedures we have in place to protect our trade secrets may not be effective in preventing misappropriation of our trade secrets by others. In addition, confidentiality agreements executed by our employees, consultants and advisors may not be enforceable or may not provide meaningful protection for our trade secrets or other proprietary information in the event of unauthorized use or disclosure. Litigating a trade secret claim is expensive and time consuming, and the outcome is unpredictable. In addition, courts outside the United States are sometimes less willing to protect trade secrets. Moreover, our competitors may independently develop equivalent knowledge methods and know‑how. If we are unable to protect our intellectual property rights, we may be unable to prevent competitors from using our own inventions and intellectual property to compete against us and our business may be harmed.

Unfavorable results of legal proceedings could materially and adversely affect our financial condition.

We are and may become a party to legal proceedings, claims and other legal matters in the ordinary course of business or otherwise. These legal proceedings, claims and other legal matters, regardless of merit, may be costly, time‑consuming and require the attention of key management and other personnel. The outcomes of such matters are uncertain and difficult to predict. If any such matters are adjudicated against us, in whole or in part, we may be subject to substantial monetary damages, disgorgement of profits, and injunctions that prevent us from operating our business, any of which could materially and adversely affect our business and financial condition. We cannot guarantee that our insurance coverage will be sufficient to cover any damages awarded against us. Further, legal proceedings, and any adverse resolution thereof, can result in adverse publicity and damage to our reputation, which could adversely impact our business.

Because the majority of our product revenue is derived from sales of the CyberKnife and TomoTherapy Systems, which have a long and variable sales and installation cycle, our revenues and cash flows may be volatile and difficult to predict.

Our primary products are the CyberKnife and TomoTherapy Systems. We expect to generate substantially all of our revenue for the foreseeable future from sales of and service contracts for the CyberKnife and TomoTherapy Systems. The CyberKnife and TomoTherapy Systems have lengthy sales and purchase order cycles because they are major capital equipment items and require the approval of senior management at purchasing institutions. In addition, sales to some of our customers are subject to competitive bidding or public tender processes. These approval and bidding processes can be lengthy. Selling our systems, from first contact with a potential customer to a complete order, generally spans six months to two years and involves personnel with multiple skills. The sales process in the U.S. typically begins with pre‑selling activity followed by sales presentations and other sales related activities. After the customer has expressed an intention to purchase a CyberKnife or TomoTherapy System, we negotiate and enter into a definitive purchase contract with the customer. The negotiation of terms that are not standard for Accuray may require additional time and approvals. Typically, following the execution of the contract, the customer begins the building or renovation of a radiation‑shielded facility to house the CyberKnife or TomoTherapy System, which together with the subsequent installation of the CyberKnife or TomoTherapy System, can take up to 24 months to complete. In order to construct this facility, the customer must typically obtain radiation device installation permits, which are granted by state and local government bodies, each of which may have different criteria for permit issuance. If a permit was denied for installation at a specific hospital or treatment center, our CyberKnife or TomoTherapy System could not be installed at that location. In addition, some of our customers are cancer centers or facilities that are new, and in these cases it may be necessary for the entire facility to be completed before the CyberKnife or TomoTherapy System can be installed, which can result in additional construction and installation delays. Our sales and installations of CyberKnife and TomoTherapy Systems tend to be heaviest during the third month of each fiscal quarter.

Under our revenue recognition policy, we recognize revenue attributable to a CyberKnife or TomoTherapy System purchase when control is transferred upon delivery while an element of installation is deferred until performed. Under our current forms of purchase and service contracts, we record a majority of the purchase price as revenue for a CyberKnife or TomoTherapy System upon installation or delivery of the system. Events beyond our control may delay installation and the satisfaction of contingencies required to receive cash inflows and recognize revenue, including delays in the customer obtaining funding or financing, delays in construction at the customer site or delays in the customer obtaining receipt of regulatory approvals such as certificates of need.

The long sales cycle, together with delays in the delivery and installation of CyberKnife and TomoTherapy Systems or customer cancellations that could affect our ability to recognize revenue, could adversely affect our cash flows and revenue, which would harm our results of operations and may result in significant fluctuations in our reporting of quarterly revenues. Because of these fluctuations, it is likely that in some future quarters, our operating results will fall below the expectations of securities analysts or investors. If that happens, the market price of our stock would likely decrease. These fluctuations also mean that you will not be able to rely upon our operating results in any particular period as an indication of future performance.

48


 

We depend on third‑party distributors to market and distribute our products in international markets. If our distributors fail to successfully market and distribute our products, our business will be materially harmed.

We depend on a number of distributors in our international markets. We cannot control the efforts and resources our third‑party distributors will devote to marketing the CyberKnife or TomoTherapy Systems. Our distributors may not be able to successfully market and sell the CyberKnife or TomoTherapy Systems, may not devote sufficient time and resources to support the marketing and selling efforts and may not market the CyberKnife or TomoTherapy Systems at prices that will permit the product to develop, achieve or sustain market acceptance. In some jurisdictions, we rely on our distributors to manage the regulatory process and oversee their activities such that they are in compliance with all laws that govern their activities, such as the U.S. Foreign Corrupt Practices Act (“FCPA”), and we are dependent on their ability to do so effectively. In addition, if a distributor is terminated by us or goes out of business, it may take us a period of time to locate an alternative distributor, to seek appropriate regulatory approvals and to train its personnel to market the CyberKnife or TomoTherapy Systems, and our ability to sell and service the CyberKnife or TomoTherapy Systems in the region formerly serviced by such terminated distributor could be materially and adversely affected. Any of our distributors could become insolvent or otherwise become unable to pay amounts owed to us when due. If any of these distributor relationships end and are not replaced, our revenues from product sales or the ability to service our products in the territories serviced by these distributors could be adversely affected. Any of these factors could materially and adversely affect our revenue from international markets, increase our costs in those markets or damage our reputation. If we are unable to attract additional international distributors, our international revenue may not grow. If our distributors experience difficulties, do not comply with regulatory or legal requirements that results in fines or penalties, do not actively market the CyberKnife or TomoTherapy Systems or do not otherwise perform under our distribution agreements, our potential for revenue and gross margins from international markets may be dramatically reduced, and our business could be harmed.

The high unit price of the CyberKnife and TomoTherapy Systems, as well as other factors, may contribute to substantial fluctuations in our operating results, which could adversely affect our stock price.

Because of the high unit price of the CyberKnife and TomoTherapy Systems and the relatively small number of units installed each quarter, each installation of a CyberKnife or TomoTherapy System can represent a significant percentage of our revenue for a particular quarter. Therefore, if we do not install a CyberKnife or TomoTherapy System when anticipated, we will not be able to recognize the associated revenue and our operating results will vary significantly from our expectations. This is of particular concern when the economic environment is volatile, where we have had experiences with customers cancelling or postponing orders for our CyberKnife and TomoTherapy Systems and delaying any required build‑outs. These fluctuations and other potential fluctuations mean that you should not rely upon our operating results in any particular period as an indication of future performance.

As a strategy to assist our sales efforts, we may offer extended payment terms, which may potentially result in higher days sales outstanding, reduced cash flows in a particular period and greater payment defaults.

We offer longer or extended payment terms for qualified customers in some circumstances. As of September 30, 2019, customer contracts with extended payment terms of more than one year amounted to approximately 3% of our total accounts receivable balance. While we qualify customers to whom we offer longer or extended payment terms, their financial positions may change adversely over the longer time period given for payment. This may result in an increase in payment defaults, which would affect our revenue, as we recognize revenue on such transactions on a cash basis. Any increase in days sales outstanding could also negatively affect our cash flow.

Our operations are vulnerable to interruption or loss because of natural disasters, epidemics, terrorist acts and other events beyond our control, which would adversely affect our business.

We have facilities in countries around the world, including two manufacturing facilities, each of which is equipped to manufacture unique components of our products. The manufacturing facilities are located in Madison, Wisconsin, and Chengdu, China. We do not maintain backup manufacturing facilities for any of our manufacturing facilities or for our IT facilities, so we depend on each of our current facilities for the continued operation of our business. In addition, we conduct a significant portion of other activities, including administration and data processing, at facilities located in California which has experienced major earthquakes in the past, as well as other natural disasters. Chengdu, China, where one of our manufacturing facilities is located, has also experienced major earthquakes in the past. We do not carry earthquake insurance. Unexpected events at any of our facilities, including fires or explosions; natural disasters, such as hurricanes, floods, tornados, and earthquakes; war or terrorist activities; unplanned outages; supply disruptions; and failures of equipment or systems, or the failure to take adequate steps to mitigate the likelihood or potential impact of such events, could significantly disrupt our operations, delay or prevent product manufacturing and shipment for the time required to repair, rebuild or replace our manufacturing facilities, which could be lengthy, result in large expenses to repair or replace the facilities, and adversely affect our results of operation. In addition, concerns about terrorism, the effects of a terrorist attack, political turmoil or an epidemic outbreak could have a negative effect on our operations and the operations of our suppliers and customers and the ability to travel, which could harm our business, financial condition and results of operations.

49


 

We may attempt to acquire new businesses, products or technologies, or enter into strategic collaborations or alliances, including forming joint ventures, and if we are unable to successfully complete these acquisitions or to integrate acquired businesses, products, technologies or employees, we may fail to realize expected benefits or harm our existing business.

Our success will depend, in part, on our ability to expand our product offerings and grow our business in response to changing technologies, customer demands, and competitive pressures. In some circumstances, we may determine to do so through the acquisition of complementary businesses, products or technologies or through collaborating with complementary businesses, including forming joint ventures, such as our recently announced joint venture in China, rather than through internal development. The identification of suitable acquisition, alliance and joint venture partner candidates can be difficult, time consuming, and costly, and we may not be able to successfully complete identified acquisitions, alliances, or joint ventures. Other companies may compete with us for these strategic opportunities. In addition, even if we successfully complete an acquisition, alliance, or joint venture, we may not be able to successfully integrate newly acquired organizations, products or technologies into our operations or timely and effectively commence operations of any joint venture or other alliance because the process of integration could be expensive, time consuming and may strain our resources. Furthermore, we may be required to contribute significant amounts of capital or incur losses in the initial stages of an alliance or joint venture, particularly as selling and marketing activities increase ahead of expected long-term revenue. For example, we are expected to make initial capital contributions to our joint venture in China before December 31, 2019 and further contributions may be necessary in the future as the joint venture begins operations in China in order to achieve our long-term strategy in China. In addition, the process for customers of the acquired company, alliance or joint venture to comply with local or foreign regulatory requirements that may be required to purchase our products may cause delays in the acquisition target, alliance partner or joint venture’s ability to conduct business. For example, any delays in customers in China to obtain Class A or Class B user licenses or in the subsequent tender process to complete the sale could affect our joint venture’s expected ability to initiate sales and recognize revenue in China. Furthermore, the products and technologies that we acquire, jointly develop, or with respect to which we collaborate may not be successful, or may require significantly greater resources and investments than we originally anticipated. Implementing or acquiring new lines of business or offering new products and services within existing lines of business can affect the sales and profitability of existing lines of business or products and services, including as a result of sales channel conflicts. In addition, we may not be in a position to exercise sole decision making authority regarding any strategic collaboration, alliance or joint venture, which could result in impasses on decisions or decisions made by our partners, and our partners in such collaborations, alliances or joint ventures may have economic or business interests that are, or may become, inconsistent with our interests. Collaborations, alliances and joint ventures can be difficult to manage and may involve significant expense and divert the focus and attention of our management and other key personnel away from our existing businesses. With respect to any acquisition, we may be unable to retain employees of acquired companies, or retain the acquired company’s customers, suppliers, distributors or other partners who are our competitors or who have close relationships with our competitors. In addition, with respect to joint ventures, we may not be able to attract qualified employees, acquire customers, or develop reliable supply, distribution or other partnerships. As a result of certain collaborations, alliances and joint ventures we could face potential damage to existing customer relationships or lack of customer acceptance or inability to attract new customers. These risks could be magnified to the extent that any new collaboration, alliance or joint venture would result in a significant increase in operations in developing markets. Future acquisitions or alliances could also result in potentially dilutive issuances of equity securities or the incurrence of debt, contingent liabilities, or expenses or other charges such as in‑process research and development, any of which could harm our business and affect our financial results or cause a reduction in the price of our common stock. Further, acquisition targets, alliance partners and joint ventures may also operate in foreign jurisdictions with laws and regulations with which we have limited familiarity, which could adversely impact our ability to comply with such laws and regulations and may lead to increased litigation risk. Such laws may also offer us inadequate or less intellectual property protection relative to U.S. laws, which may impact our ability, as well as the ability of the acquisition target, alliance partner and joint venture, to safeguard our respective intellectual property from infringement and misappropriation. As a result of these and other factors, we may not realize the expected benefits of any acquisition, collaboration, joint venture or strategic alliance or such benefits may not be realized at expected levels or within the expected time period. The failure to successfully consummate such strategic transactions and effectively integrate and execute following such consummation may have an adverse impact on our growth, profitability, financial position and results of operations.

Multiple factors may adversely affect our ability to fully utilize certain tax loss carryforwards.

As of September 30, 2019, we had approximately $331 million and $132 million in federal and state net operating loss carry forwards, respectively. The federal and state carryforwards expire in varying amounts beginning in 2025 for federal and 2020 for state purposes. In addition, as of September 30, 2019, we had federal and state research and development tax credit carryforwards of approximately $21 million and $20 million, respectively. If not utilized, such research credits for federal tax purposes will begin to expire in 2020, while the California research credits have no expiration date and other state research credits will begin to expire in 2020. Utilization of our net operating loss and credit carry forwards is subject to annual limitation due to the application of the ownership change limitations provided by Section 382 of the Internal Revenue Code and similar state provisions to us. Future changes in our stock ownership, including future offerings, as well as changes that may be outside of our control, could result in an ownership change under Section 382 of the Internal Revenue Code. However, none of the federal and state net operating loss carryforwards are expected to expire as a result of the ownership change limitation.

50


 

The Tax Cuts and Jobs Act of 2017 could adversely affect our business and financial condition.

In December 2017, the “Tax Cuts and Jobs Act” (the “Tax Act”) was enacted into law, which significantly amends the Internal Revenue Code of 1986. The Tax Act, among other things, reduced the corporate tax rate from a top marginal rate of 35% to a flat rate of 21%, limited the tax deduction for interest expense to 30% of adjusted earnings, eliminated net operating loss carrybacks, imposed a one-time tax on offshore earnings at reduced rates regardless of whether they are repatriated, allows immediate deductions for certain new investments instead of deductions for depreciation expense over time, and modifies or repeals many business deductions and credits. The ongoing and future impact on our business will continue to be assessed due to the complexity and interdependency of the legislative provisions, as well as any new or proposed Treasury regulations, which may yet be issued. Notwithstanding the reduction in the corporate income tax rate, the overall impact of the Tax Act is uncertain and our business and financial condition could be adversely affected.

Our results may be impacted by changes in foreign currency exchange rates.

Currently, the majority of our international sales are denominated in U.S. Dollars. As a result, an increase in the value of the U.S. Dollar relative to foreign currencies could require us to reduce our sales price or make our products less competitive in international markets. For example, the announcement of Brexit caused severe volatility in global currency exchange rate fluctuations that resulted in the strengthening of the U.S. Dollar against foreign currencies in which we conduct business. We believe the strengthening of the U.S. Dollar has caused a potential delay in orders and we may continue to see our sales decline due to the strengthening of the U.S. Dollar. Also, if our international sales increase, we may enter into a greater number of transactions denominated in non‑U.S. Dollars, which would expose us to foreign currency risks, including changes in currency exchange rates. If we are unable to address these risks and challenges effectively, our international operations may not be successful and our business would be materially harmed.

If we fail to maintain an effective system of internal control over financial reporting, our ability to produce timely and accurate financial results could be impaired. As a result, current and potential stockholders could lose confidence in our financial reporting, which could have an adverse effect on our business and our stock price.

Effective internal controls are necessary for us to provide reliable financial reports and to protect from fraudulent, illegal, or unauthorized transactions. If we cannot maintain effective controls and provide timely and reliable financial reports, our business and operating results could be harmed.

A failure to implement and maintain effective internal control over financial reporting could result in a material misstatement of our financial statements or otherwise cause us to fail to meet our financial reporting obligations. This, in turn, could result in a loss of investor confidence in the accuracy and completeness of our financial reports, which could have an adverse effect on our business and operating results and our stock price, and we could be subject to stockholder litigation.

In addition, it may be difficult to timely determine the effectiveness of our financial reporting systems and internal controls because of the complexity of our financial model. We recognize revenue from a range of transactions including CyberKnife and TomoTherapy Systems sales and services. The CyberKnife and TomoTherapy Systems are complex products that contain both hardware and software elements. The complexity of the CyberKnife and TomoTherapy Systems and of our financial model used to recognize revenue on such systems requires us to process a greater variety of financial transactions than would be required by a company with a less complex financial model. Accordingly, efforts to timely remediate deficiencies or weaknesses in our internal controls would likely be more challenging for us than they would for a company with a less complex financial model. Furthermore, if we were to find an internal control deficiency or material weakness, we may be required to amend or restate historical financial statements, which would likely have a negative impact on our stock price.

Changes in interpretation or application of generally accepted accounting principles may adversely affect our operating results.

We prepare our financial statements to conform to United States Generally Accepted Accounting Principles. These principles are subject to interpretation by the Financial Accounting Standards Board, American Institute of Certified Public Accountants, the Public Company Accounting Oversight Board, the Securities and Exchange Commission and various other regulatory or accounting bodies. A change in interpretations of, or our application of, these principles can have a significant effect on our reported results and may even affect our reporting of transactions completed before a change is announced. Additionally, as we are required to adopt new accounting standards, our methods of accounting for certain items may change, which could cause our results of operations to fluctuate from period to period. For example, upon adoption of ASC 606, we now recognize system revenue upon transfer of control, which is generally at time of delivery. Under the previous accounting guidance, we recognized system revenue upon acceptance when and if we have installation responsibilities. If circumstances change over time or interpretation of the revenue recognition rules change, we could be required to adjust the timing of recognizing revenue and our financial results could suffer.

51


 

Our liquidity could be adversely impacted by adverse conditions in the financial markets.

At September 30, 2019, we had $80.9 million in cash and cash equivalents. The available cash and cash equivalents are held in accounts managed by third‑party financial institutions and consist of cash in our operating accounts and cash invested in money market funds. To date, we have experienced no material realized losses on or lack of access to our invested cash, or cash equivalents; however, we can provide no assurances that access to our invested cash and cash equivalents will not be impacted by adverse conditions in the financial markets.

At any point in time, we also have funds in our operating accounts that are with third‑party financial institutions that exceed the Federal Deposit Insurance Corporation (“FDIC”) insurance limits. While we monitor daily the cash balances in our operating accounts and adjust the cash balances as appropriate, these cash balances could be impacted if the underlying financial institutions fail or become subject to other adverse conditions in the financial markets. To date, we have experienced no loss or lack of access to cash in our operating accounts.

Our ability to raise capital in the future may be limited, and our failure to raise capital when needed could prevent us from executing our growth strategy.

While we believe that our existing cash and cash equivalents will be sufficient to meet our anticipated cash needs for at least the next twelve months, the timing and amount of our working capital and capital expenditure requirements may vary significantly depending on numerous factors, including the other risk factors described above and below.

If our capital resources are insufficient to satisfy our liquidity requirements, we may seek to sell additional equity securities or debt securities or obtain other debt financing, which could be difficult or impossible depending on the state of economic and capital markets environments at the time, as well as the state of our business, operating results and financial condition. Our debt levels may impair our ability to obtain additional financing in the future. The sale of additional equity securities or convertible debt securities would result in additional dilution to our stockholders. We cannot assure that additional financing, if required or desired, will be available in amounts or on terms acceptable to us, if at all.

Risks Related to the Regulation of our Products and Business

Modifications, upgrades, new indications and future products related to the CyberKnife or TomoTherapy Systems or the Precision Treatment Planning or iDMS Data Management System software may require new FDA 510(k) clearances or premarket approvals and similar licensing or approvals in international markets. Such modifications, or any defects in design, manufacture or labeling may require us to recall or cease marketing the affected systems or software until approvals or clearances are obtained.

The CyberKnife and TomoTherapy Systems as well as the Precision Treatment Planning and iDMS Data Management System software are medical devices that are subject to extensive regulation in the United States by local, state and the federal government, including the FDA. The FDA regulates virtually all aspects of a medical device design, development, testing manufacturing, labeling, storage, record keeping, adverse event reporting, sale, promotion, distribution and shipping. Before a new medical device, or a new intended use or indication or claim for an existing product, can be marketed in the United States, it must first receive either premarket approval or 510(k) clearance from the FDA, unless an exemption exists. Either process can be expensive, lengthy and unpredictable. The FDA’s 510(k) clearance process generally takes from three to twelve months, but it can last longer. The process of obtaining premarket approval is much more costly and uncertain than the 510(k) clearance process and it generally takes from one to three years, or even longer, from the time the application is filed with the FDA. Additionally, outside of the United States, our products are subject to clearances and approvals by foreign governmental agencies similar to the FDA. In order to market our products internationally, we must obtain licenses or approvals from these governmental agencies, which could include local requirements, safety standards, testing or certifications, and can be time consuming, burdensome and uncertain. Despite the time, effort and cost, there can be no assurance that a particular device or a modification of a device will be approved or cleared by the FDA or any foreign governmental agency in a timely fashion, if at all. Even if we are granted regulatory clearances or approvals, they may include significant limitations on the indicated uses of the product, which may limit the market for those products, and how those products can be promoted.

Medical devices may only be marketed for the indications for which they are approved or cleared. The FDA and other foreign governments also may change their policies, adopt additional regulations, or revise existing regulations, each of which could prevent or delay approval or clearance of our device, or could impact our ability to market our currently approved or cleared device. We are also subject to medical device reporting regulations which require us to report to the FDA and other international governmental agencies if our products cause or contribute to a death or a serious injury, or malfunction in a way that would likely cause or contribute to a death or a serious injury. We also are subject to the QSR in the U.S. and ISO 13485 certification in many international markets, compliance with which is necessary to receive FDA and other international clearances or approvals to market new products and is necessary for us to be able to continue to market a cleared or approved product in the United States or globally. After a product is placed in the market, we are also subject to regulations by the FDA and Federal Trade Commission related to the advertising and promotion of our products to ensure our claims are consistent with our regulatory clearances, that there is scientific data to substantiate our claims and that our advertising is not false or misleading. Our products are also subject to state regulations and various worldwide laws and regulations.

52


 

A component of our strategy is to continue to upgrade the CyberKnife and TomoTherapy Systems as well as the Precision Treatment Planning an iDMS Data Management System software. Upgrades previously released by us required 510(k) clearance and international registration before we were able to offer them for sale. We expect our future upgrades will similarly require 510(k) clearance or approval; however, future upgrades may be subject to substantially more time consuming data generation requirements and uncertain premarket approval or clearance processes. If we were required to use the premarket approval process for future products or product modifications, it could delay or prevent release of the proposed products or modifications, which could harm our business.

The FDA requires device manufacturers to make their own determination of whether or not a modification requires an approval or clearance; however, the FDA can review a manufacturer’s decision not to submit for additional approvals or clearances. Any modification to an FDA approved or cleared device that would significantly affect its safety or efficacy or that would constitute a major change in its intended use would require a new premarket approval or 510(k) clearance. We cannot assure you that the FDA will agree with our decisions not to seek approvals or clearances for particular device modifications or that we will be successful in obtaining premarket approvals or 510(k) clearances for modifications in a timely fashion, if at all.

We have obtained 510(k) clearance for the CyberKnife Systems for the treatment of conditions anywhere in the body when radiation treatment is indicated, and we have obtained 510(k) clearance for the TomoTherapy Systems to be used as integrated systems for the planning and delivery of IMRT for the treatment of cancer. We have made modifications to the CyberKnife and TomoTherapy Systems in the past and may make additional modifications in the future that we believe do not or will not require additional approvals or clearances. If the FDA disagrees, based on new finalized guidance and requires us to obtain additional premarket approvals or 510(k) clearances for any modifications to the CyberKnife or TomoTherapy Systems and we fail to obtain such approvals or clearances or fail to secure approvals or clearances in a timely manner, we may be required to cease manufacturing and marketing the modified device or to recall such modified device until we obtain FDA approval or clearance and we may be subject to significant regulatory fines or penalties.

The FDA and similar governmental authorities in other countries in which we market and sell our products have the authority to require the recall of our products in the event of material deficiencies or defects in design, manufacture or labeling. A government mandated recall, or a voluntary recall by us, could occur as a result of component failures, manufacturing errors or design defects, including defects in labeling and user manuals. Any recall could divert management’s attention, cause us to incur significant expenses, generate negative publicity, harm our reputation with customers, negatively affect our future sales and business, require redesign of the CyberKnife or TomoTherapy Systems, and harm our operating results. In these circumstances, we may also be subject to significant enforcement action. If any of these events were to occur, our ability to introduce new or enhanced products in a timely manner would be adversely affected, which in turn would harm our future growth.

We are subject to federal, state and foreign laws and regulations applicable to our operations, the violation of which could result in substantial penalties and harm our business.

In addition to regulation by the FDA and similar governmental authorities in other countries, our operations are subject to other laws and regulations, such as laws and rules governing interactions with healthcare providers, anti-corruption laws, privacy rules and transparency laws. In order to maintain compliance with these laws and requirements, we must continually keep abreast of any changes or developments to be able to integrate compliance protocols into the development and regulatory documentation of our products. Failure to maintain compliance could result in substantial penalties to us and harm our business.

Laws and ethical rules governing interactions with healthcare providers.  The Medicare and Medicaid “anti‑kickback” laws, and similar state laws, prohibit soliciting, offering, paying or accepting any payments or other remuneration that is intended to induce any individual or entity to either refer patients to or purchase, lease or order, or arrange for or recommend the purchase, lease or order of, healthcare products or services for which payment may be made under federal and state healthcare programs, such as Medicare and Medicaid. Such laws impact our sales, marketing and other promotional activities by reducing the types of financial arrangements we may have with our customers, potential customers, marketing consultants and other service providers. They particularly impact how we structure our sales offerings, including discount practices, customer support, product loans, education and training programs, physician consulting, research grants and other service arrangements. Many of these laws are broadly drafted and are open to a variety of interpretations, making it difficult to determine with any certainty whether certain arrangements violate such laws, even if statutory safe harbors are available.

In addition to such anti‑kickback laws, federal and state “false claims” laws generally prohibit the knowing filing or causing the filing of a false claim or the knowing use of false statements to obtain payment from government payors. Although we do not submit claims directly to payors, manufacturers can be held liable under these laws if they are deemed to “cause” the submission of false or fraudulent claims by providing inaccurate billing or coding information to customers, or through certain other activities, including promoting products for uses or indications that are not approved by the FDA.

53


 

We are also subject to federal and state physician self‑referral laws. The federal Ethics in Patient Referrals Act of 1989, commonly known as the Stark Law, prohibits, subject to certain exceptions, physician referrals of Medicare and Medicaid patients to an entity providing certain “designated health services” if the physician or an immediate family member has any financial relationship with the entity. The Stark Law also prohibits the entity receiving the referral from billing any good or service furnished pursuant to an unlawful referral. Various states have corollary laws to the Stark Law, including laws that require physicians to disclose any financial interest they may have with a healthcare provider to their patients when referring patients to that provider. Both the scope and exceptions for such laws vary from state to state.

If our past or present operations are found to be in violation of any of these “anti‑kickback,” “false claims,” “self‑referral” or other similar laws in foreign jurisdictions, we may be subject to the applicable penalty associated with the violation, which may include significant civil and criminal penalties, damages, fines, imprisonment and exclusion from healthcare programs. The impact of any such violations may lead to curtailment or restructuring of our operations, which could adversely affect our ability to operate our business and our financial results.

Anti‑corruption laws.  We are also subject to laws regarding the conduct of business overseas, such as the FCPA, the U.K. Bribery Act of 2010, the Brazil Clean Companies Act, and other similar laws in foreign countries in which we operate. The FCPA prohibits the provision of illegal or improper inducements to foreign government officials in connection with the obtaining of business overseas. Becoming familiar with and implementing the infrastructure necessary to ensure that we and our distributors comply with such laws, rules and regulations and mitigate and protect against corruption risks could be quite costly, and there can be no assurance that any policies and procedures we do implement will protect us against liability under the FCPA or related laws for actions taken by our employees, executive officers, distributors, agents and other intermediaries with respect to our business. Violations of the FCPA or other similar laws by us or any of our employees, executive officers, distributors, agents or other intermediaries could subject us or the individuals involved to criminal or civil liability, cause a loss of reputation in the market, and materially harm our business.

Laws protecting patient health information.  There are a number of federal and state laws protecting the confidentiality of certain patient health information, including patient records, and restricting the use and disclosure of that protected information. In particular, the U.S. Department of Health and Human Services (“HHS”) has promulgated patient privacy rules under the HIPAA. These privacy rules protect medical records and other personal health information of patients by limiting their use and disclosure, giving patients the right to access, amend and seek accounting of their own health information and limiting most uses and disclosures of health information to the minimum amount reasonably necessary to accomplish the intended purpose. The HIPAA privacy standard was amended by the HITECH, enacted as part of the American Recovery and Reinvestment Act of 2009. Although we are not a “covered entity” under HIPAA, we are considered a “business associate” of certain covered entities and, as such, we are directly subject to HIPAA, including its enforcement scheme and inspection requirements, and are required to implement policies, procedures as well as reasonable and appropriate physical, technical and administrative security measures to protect individually identifiable health information we receive from covered entities. Our failure to protect health information received from customers in compliance with HIPAA or other laws could subject us to civil and criminal liability to the government and civil liability to the covered entity, could result in adverse publicity, and could harm our business and impair our ability to attract new customers.

Transparency laws.  The Sunshine Act, which was enacted by Congress as part of the Patient Protection and Affordable Care Act on December 14, 2011, requires each applicable manufacturer, which includes medical device companies such as Accuray, to track and report to the federal government on an annual basis all payments and other transfers of value from such applicable manufacturer to U.S. licensed physicians and teaching hospitals as well as physician ownership of such applicable manufacturer’s equity, in each case subject to certain statutory exceptions. Such data will be made available by the government on a publicly searchable website. Failure to comply with the data collection and reporting obligations imposed by the Sunshine Act can result in civil monetary penalties ranging from $1,000 to $10,000 for each payment or other transfer of value that is not reported (up to a maximum of $150,000 per reporting period) and from $10,000 to $100,000 for each knowing failure to report (up to a maximum of $1 million per reporting period). In addition, we are subject to similar state and foreign laws related to the tracking and reporting of payments and other transfers of value to healthcare professionals, the violation of which could, among other things, result in civil monetary penalties and adversely impact our reputation and business.

If we or our distributors do not obtain and maintain the necessary regulatory approvals in a specific country, we will not be able to market and sell our products in that country.

To be able to market and sell our products in a specific country, we or our distributors must comply with applicable laws and regulations of that country. In jurisdictions where we rely on our distributors to manage the regulatory process, we are dependent on their ability to do so effectively. While the laws and regulations of some countries do not impose barriers to marketing and selling our products or only require notification, others require that we or our distributors obtain the approval of a specified regulatory body. These laws and regulations, including the requirements for approvals, and the time required for regulatory review vary from country to country. The governmental agencies regulating medical devices in some countries, for example, require that the user interface on

54


 

medical device software be in the local language. We currently provide user guides and manuals, both paper copies and electronically, in the local language but only provide an English language version of the user interface. Obtaining regulatory approvals is expensive and time‑consuming, and we cannot be certain that we or our distributors will receive regulatory approvals in each country in which we market or plan to market our products. If we modify our products, we or our distributors may need to apply for additional regulatory approvals before we are permitted to sell them. We may not continue to meet the quality and safety standards required to maintain the authorizations that we or our distributors have received. It can also be costly for us and our distributors to keep up with regulatory changes issued or mandated from time to time. If we change distributors, it may be time‑consuming and disruptive to our business to transfer the required regulatory approvals, particularly if such approvals are maintained by our third‑party distributors on our behalf. If we or our distributors are unable to maintain our authorizations, or fail to obtain appropriate authorizations in a particular country, we will no longer be able to sell our products in that country, and our ability to generate revenue will be materially adversely affected.

Within the EU, we are required under the Medical Device Directive to affix the Conformité Européene, or CE, mark on our products in order to sell the products in member countries of the EU. This conformity to the applicable directives is done through self‑declaration and is verified by an independent certification body, called a Notified Body, before the CE mark can be placed on the device. Once the CE mark is affixed to the device, the Notified Body will regularly audit us to ensure that we remain in compliance with the applicable European laws or directives. CE marking demonstrates that our products comply with the laws and regulations required by the European Union countries to allow free movement of trade within those countries. If we cannot support our performance claims and/or demonstrate or maintain compliance with the applicable European laws and directives, we lose our CE mark, which would prevent us from selling our products within the European Union. In addition, in 2020, the EU will be implementing the Medical Device Regulation (MDR), which replaces the existing Medical Device Directive. The MDR establishes new requirements and oversight for maintaining the CE mark. The official guidance is not available for the implementation of these requirements and the number of Notified Bodies are still limited. There may be variability in review timeframes and requirements as both manufacturers and authorities navigate these new requirements.

Under the Pharmaceutical Affairs Law in Japan, a pre‑market approval necessary to sell, market and import a product, or Shonin, must be obtained from the Ministry of Health, Labor and Welfare (“MHLW”), for our products. Before issuing approvals, MHLW examines the application in detail with regard to the quality, efficacy, and safety of the proposed medical device. The Shonin is granted once MHLW is content with the safety and effectiveness of the medical device. The time required for approval varies. A delay in approval could prevent us from selling our products in Japan, which could impact our ability to generate revenue and harm our business.

In addition to laws and regulations regarding medical devices, we are subject to a variety of environmental laws and regulations around the world regulating our operations, including those relating to the use, generation, handling, storage, transportation, treatment and disposal of hazardous materials, which laws impose compliance costs on our business and can also result in liability to us. Although we follow procedures intended to comply with existing environmental laws and regulations, risk of accidental contamination or injury can never be fully eliminated. In the event of an accident, state or federal or other applicable authorities may curtail our use of these materials and interrupt our business operations. In addition, future changes in these laws and regulations could also increase our costs of doing business. We must continually keep abreast of these standards and requirements and integrate our compliance into the development and regulatory documentation for our products. Failure to meet these standards could limit our ability to market our products in those regions that require compliance to such standards. For example, the European Union has adopted directives that may lead to restrictions on the use of certain hazardous substances or other regulated substances in some of our products sold there, unless such products are eligible for an exemption. While we believe that certain of our products are exempt, there can be no guarantee that such determination would not be challenged or that the regulations would not change in a way that would subject our products to such regulation. These directives, along with other laws and regulations that may be adopted by other countries, could increase our operating costs in order to maintain access to certain markets, which could adversely affect our business.

Healthcare reform legislation could adversely affect demand for our products, our revenue and our financial condition.

In March 2010, the Patient Protection and Affordable Care Act, as amended by Health Care and Education Reconciliation Act (collectively, the “ACA”) were signed into law. The ACA provides for, among other things, a 2.3% excise tax on U.S. sales of medical devices, including our products, effective as of 2013. The excise tax was suspended for a two year period beginning January 1, 2016 and was recently further suspended through December 31, 2019. If and when enacted, this tax burden may have a material, negative impact on our business, results of operations and cash flow. In addition, the ACA includes a large number of other health related provisions, including expanding Medicaid eligibility, requiring most individuals to have health insurance, establishing new regulations on health plans, establishing health insurance exchanges, requiring manufacturers to report payments or other transfers of value made to physicians and teaching hospitals, modifying certain payment systems to encourage more cost‑effective care and a reduction of inefficiencies and waste and including new tools to address fraud and abuse. The laws also include a decrease in the annual rate of inflation for Medicare payments to hospitals and the establishment of an independent payment advisory board to suggest methods of reducing the rate of growth in Medicare spending. We do not yet know the full impact that the ACA will have on our business. The

55


 

taxes imposed by the ACA and the expansion in the government's role in the U.S. healthcare industry may result in decreased profits to us, lower reimbursement by third-party payors for our products, or reduced volume of medical procedures conducted with our products, all of which could have a material adverse effect on our business, financial condition and results of operations. The federal government may take further action regarding the ACA, including, but not limited to, repeal or replacement action. Most recently, the Tax Act was signed into law in December 2017, which, among other things, removed penalties for not complying with the individual mandate to carry health insurance. Additionally, all or a portion of the ACA and related subsequent legislation may be modified, repealed or otherwise invalidated through judicial challenge, which could result in lower numbers of insured individuals, reduced coverage for insured individuals and adversely affect our business.

In addition, since the adoption of the Affordable Care Act, other legislation designed to keep federal healthcare costs down has been proposed or passed. For example, under the sequestration required by the Budget Control Act of 2011, as amended by the American Taxpayer Relief Act of 2012, Medicare payments for all items and services under Parts A and B incurred on or after April 1, 2013 have been reduced by up to 2%. Future federal legislation may impose further limitations on the coverage or amounts of reimbursement available for our products from governmental agencies or third‑party payors. These limitations could have a negative impact on the demand for our products and services, and therefore on our financial position and results of operations.

Since the enactment of the ACA, CMS continues its efforts to move away from fee‑for‑service payments for furnishing items and services in Medicare. In the past several rulemaking cycles, CMS has increased packaging policies and created larger payment bundles across the Medicare Hospital Outpatient Prospective Payment System (“OPPS”). One example is CMS’ expansion of Comprehensive Ambulatory Payment Classifications, under which payment for adjunctive and secondary items, services and procedures are packaged into the most costly primary procedure at the claim level. Beyond the OPPS, CMS’ Innovation Center has launched a number of alternative payment model (“APM”) demonstrations that involve episode‑based (i.e. bundled) payment. Since 2011, for example, Center for Medicare and Medicaid Innovation (“CMMI”) has created and is in the process of creating major federal initiatives to test episode‑based payments, such as the Bundled Payments for Care Improvement, Oncology Care Model, Specialty Practitioners Payment Model Opportunities. More recently, CMMI proposed a Radiation Oncology Model (“OM”), which would mandate selected radiotherapy providers to participate in a prospective, episode-based payments model where payment is based on a patient’s diagnosis as opposed to the traditional volume-based fee-for service payment model.  It is unclear what impact, if any, such initiatives will have on our business and operating results, but uncertainties surrounding the implementation of these payment models could pause or otherwise delay the purchase of our products by our customers and any resulting decrease in reimbursement to our customers may result in reduced demand for our services.

Furthermore, the Patient Access and Medicare Protection Act of 2015 froze payment for some radiation therapy delivery and related services, and requires CMS to provide a report to the U.S. Congress on the development of an APM for radiation therapy services provided in non‑facility settings. While these types of payment packaging policies and episode‑based payments may impact reimbursement for overall patient care, including items and services furnished to patients, they also create incentives for providers to carefully assess the value proposition of technology purchases and uses. The impacts of these payment and delivery system changes are in their infancy and their overall effects remain under review.

Future legislative or policy initiatives directed at reducing costs could be introduced at either the federal or state level. We cannot predict what healthcare reform legislation or regulations, if any, including any potential repeal or amendment of the ACA, will be enacted in the United States or elsewhere, what impact any legislation or regulations related to the healthcare system that may be enacted or adopted in the future might have on our business, or the effect of ongoing uncertainty or public perception about these matters will have on the purchasing decisions of our customers. However, the implementation of new legislation and regulation may materially lower reimbursements for our products, materially reduce medical procedure volumes and significantly and adversely affect our business.

Regulations related to “conflict minerals” may force us to incur additional expenses, may result in damage to our business reputation and may adversely impact our ability to conduct our business.

The Dodd‑Frank Wall Street Reform and Consumer Protection Act and the rules promulgated by the SEC under such act require companies, including Accuray, to disclose the existence in their products of certain metals, known as “conflict minerals,” which are metals mined from the Democratic Republic of the Congo and adjoining countries. These rules requires investigative efforts, which has and will continue to cause us to incur associated costs, could adversely affect the sourcing, availability and pricing of minerals used in our products and may cause reputational harm if we determine that certain of our components contain such conflict minerals or if we are unable to alter our processes or sources of supply to avoid using such materials, all of which could adversely impact sales of our products and results of operations.

56


 

Risks Related to Our Common Stock

The price of our common stock is volatile and may continue to fluctuate significantly, which could lead to losses for stockholders.

The trading prices of the stock of high‑technology companies of our size can experience extreme price and volume fluctuations. These fluctuations often have been unrelated or out of proportion to the operating performance of these companies. Our stock price has experienced periods of volatility. Broad market fluctuations may also harm our stock price. Any negative change in the public’s perception of the prospects of companies that employ similar technology or sell into similar markets could also depress our stock price, regardless of our actual results.

In addition to the other risk factors described above and below, factors affecting the trading price of our common stock include:

 

regulatory developments related to manufacturing, marketing or sale of the CyberKnife or TomoTherapy Systems;

 

political or social uncertainties;

 

changes in product pricing policies;

 

variations in our operating results, as well as costs and expenditures;

 

announcements of technological innovations, new services or service enhancements, strategic alliances or significant agreements by us or by our competitors;

 

changes in analysts’ estimates, investors’ perceptions, recommendations by securities analysts or our failure to achieve analysts’ and our own estimates;

 

recruitment or departure of key personnel;

 

the performance of our competitors and investor perception of the markets and industries in which we compete;

 

announcement of strategic transactions or capital raising activities; and

 

market conditions in our industry, the industries of our customers and the economy as a whole.

The sale of material amounts of common stock by our stockholders could encourage short sales by third parties and depress the price of our common stock.

The downward pressure on our stock price caused by the sale of a significant number of shares of our common stock, or the perception that such sales could occur, by any of our significant stockholders could cause our stock price to decline, thus allowing short sellers of our stock an opportunity to take advantage of any decrease in the value of our stock. The presence of short sellers in our common stock may further depress the price of our common stock.

Future issuances of shares of our common stock could dilute the ownership interests of our stockholders.

Any issuance of equity securities could dilute the interests of our stockholders and could substantially decrease the trading price of our common stock. We may issue equity securities in the future for a number of reasons, including to finance our operations and business strategy (including in connection with acquisitions, strategic collaborations or other transactions), to adjust our ratio of debt to equity, to satisfy our obligations upon the exercise of outstanding options or for other reasons.

In August 2017, we issued $85.0 million aggregate principal amount of our 3.75% Convertible Senior Notes due 2022 (the “3.75% Convertible Notes”) under an indenture between us and The Bank of New York Mellon Trust Company, N.A., as trustee. $53.0 million aggregate principal amount of the 3.75% Convertible Notes were issued to certain holders of our outstanding Existing Notes in exchange for approximately $47.0 million aggregate principal amount of the Existing Notes (the “Exchange”) and $32.0 million aggregate principal amount of the 3.75% Convertible Notes were issued to certain other qualified new investors for cash. The net proceeds of the cash issuance were used to repurchase approximately $28.0 million of Existing Notes. In February 2018, we paid $40.2 million in cash to settle outstanding principal and accrued interest, and issued 254,000 shares of our common stock to retire the Existing Notes. To the extent we issue common stock upon conversion of any outstanding convertible notes, that conversion would dilute the ownership interests of our stockholders.

57


 

The conditional conversion features of the 3.75% Convertible Notes, if triggered, may adversely affect our financial condition and operating results.

In the event the conditional conversion features of the 3.75% Convertible Notes are triggered, holders of the 3.75% Convertible Notes, as applicable, will be entitled to convert such notes at any time during specified periods at their option. If one or more holders elect to convert such notes, unless we elect to satisfy our conversion obligation by delivering solely shares of our common stock (other than paying solely cash in lieu of any fractional share), including if we have irrevocably elected full physical settlement upon conversion, we would be required to make cash payments to satisfy all or a portion of our conversion obligation based on the applicable conversion rate, which could adversely affect our liquidity. In addition, even if holders do not elect to convert such notes, if we have irrevocably elected net share settlement upon conversion we could be required under applicable accounting rules to reclassify all or a portion of the outstanding principal of such notes as a current rather than long‑term liability, which could result in a material reduction of our net working capital.

Provisions in the indenture for the 3.75% Convertible Notes, the credit agreement for our Revolving Credit Facility, our certificate of incorporation and our bylaws could discourage or prevent a takeover, even if an acquisition would be beneficial in the opinion of our stockholders.

Provisions of our certificate of incorporation and bylaws could make it more difficult for a third‑party to acquire us, even if doing so would be beneficial in the opinion of our stockholders. These provisions include:

 

authorizing the issuance of “blank check” preferred stock that could be issued by our board of directors to increase the number of outstanding shares and thwart a takeover attempt;

 

establishing a classified board of directors, which could discourage a takeover attempt;

 

prohibiting cumulative voting in the election of directors, which would limit the ability of less than a majority of stockholders to elect director candidates;

 

limiting the ability of stockholders to call special meetings of stockholders;

 

prohibiting stockholder action by written consent and requiring that all stockholder actions be taken at a meeting of our stockholders; and

 

establishing advance notice requirements for nominations for election to the board of directors or for proposing matters that can be acted upon by stockholders at stockholder meetings.

In addition, Section 203 of the Delaware General Corporation Law may discourage, delay or prevent a change of control of our company. Generally, Section 203 prohibits stockholders who, alone or together with their affiliates and associates, own more than 15% of the subject company from engaging in certain business combinations for a period of three years following the date that the stockholder became an interested stockholder of such subject company without approval of the board or 662/3% of the independent stockholders. The existence of these provisions could adversely affect the voting power of holders of common stock and limit the price that investors might be willing to pay in the future for shares of our common stock.

A change of control will also trigger an event of default under the Revolving Credit Facility. If an event of default occurs, the agent for the lenders under the Revolving Credit Facility may, at its discretion, suspend or terminate any of the lenders’ loan obligations thereunder and/or declare all or any portion of the loan then‑outstanding under the Revolving Credit Facility, including all accrued but unpaid interest thereon, to be accelerated and immediately due and payable.

Furthermore, if a “fundamental change” (as such term is defined in the indenture of the 3.75% Convertible Notes) occurs, holders of the 3.75% Convertible Notes will have the right, at their option, to require us to repurchase all or a portion of their convertible notes. A “fundamental change” generally occurs when there is a change in control of Accuray (acquisition of 50% or more of our voting stock, liquidation or sale of Accuray not for stock in another publicly traded company) or trading of our stock is terminated. In the event of a “make‑whole fundamental change” (as such term is defined in the indenture of the 3.75% Convertible Notes), we may also be required to increase the conversion rate applicable to the 3.75% Convertible Notes surrendered for conversion in connection with such make‑whole fundamental change. A “make‑whole fundamental change” is generally a sale of Accuray not for stock in another publicly traded company. In addition, the indenture for the 3.75% Convertible Notes prohibits us from engaging in certain mergers or acquisitions unless, among other things, the surviving entity assumes our obligations under the 3.75% Convertible Notes.

58


 

We have not paid dividends in the past and do not expect to pay dividends in the foreseeable future.

We have never declared or paid cash dividends on our capital stock. We currently intend to retain all future earnings for the operation and expansion of our business and, therefore, do not anticipate declaring or paying cash dividends in the foreseeable future. The payment of dividends will be at the discretion of our board of directors and will depend on our results of operations, capital requirements, financial condition, prospects, contractual arrangements, and other factors our board of directors may deem relevant. If we do not pay dividends, a return on a stockholders’ investment will only occur if our stock price appreciates.

Item 2.

Unregistered Sales of Equity Securities and Use of Proceeds

 

None.

 

Item 3.

Defaults Upon Senior Securities

 

None.

 

Item 4.

Mine Safety Disclosures

 

Not applicable.

 

Item 5.

Other Information

 

None.

 

59


 

Item 6.

Exhibits

 

Exhibit

 

 

 

Incorporated by Reference

 

Filed

No.

 

Exhibit Description

 

Form

 

File No.

 

Exhibit

 

Filing Date

 

Herewith

 

 

 

 

 

 

 

 

 

 

 

 

 

  10.1†

 

Amendment No. 4 to Credit and Security Agreement by and among the Registrant, TomoTherapy Incorporated, any additional borrowers that may be added thereto, MidCap Financial Trust, individually as lender and as agent, and the other financial institutions or other entities from time to time party thereto, dated August 30, 2019.

 

 

 

 

 

X

 

 

 

 

 

 

 

 

 

 

 

 

 

  10.2†

 

Amendment No. 5 to Credit and Security Agreement by and among the Registrant, TomoTherapy Incorporated, any additional borrowers that may be added thereto, MidCap Funding IV Trust, individually as lender and as agent, and the other financial institutions or other entities from time to time party thereto, dated August 30, 2019.

 

 

 

 

 

X

 

 

 

 

 

 

 

 

 

 

 

 

 

  31.1

 

Certification of Chief Executive Officer Pursuant to Rule 13a-14(a) of the Securities Exchange Act of 1934, as amended.

 

 

 

 

 

X

 

 

 

 

 

 

 

 

 

 

 

 

 

  31.2

 

Certification of Chief Financial Officer Pursuant to Rule 13a-14(a) of the Securities Exchange Act of 1934, as amended.

 

 

 

 

 

X

 

 

 

 

 

 

 

 

 

 

 

 

 

  32.1*

 

Certification of Chief Executive Officer and Chief Financial Officer Pursuant to Rule 13a-14(b) of the Securities Exchange Act of 1934, as amended, and 18 U.S.C. 1350.

 

 

 

 

 

X

 

 

 

 

 

 

 

 

 

 

 

 

 

101.INS

 

XBRL Instance Document.

 

 

 

 

 

 

 

 

 

X

 

 

 

 

 

 

 

 

 

 

 

 

 

101.SCH

 

XBRL Taxonomy Extension Schema Document.

 

 

 

 

 

 

 

 

 

X

 

 

 

 

 

 

 

 

 

 

 

 

 

101.CAL

 

XBRL Taxonomy Extension Calculation Linkbase Document.

 

 

 

 

 

 

 

 

 

X

 

 

 

 

 

 

 

 

 

 

 

 

 

101.DEF

 

XBRL Taxonomy Extension Definition Linkbase Document.

 

 

 

 

 

 

 

 

 

X

 

 

 

 

 

 

 

 

 

 

 

 

 

101.LAB

 

XBRL Taxonomy Extension Label Linkbase Document.

 

 

 

 

 

 

 

 

 

X

 

 

 

 

 

 

 

 

 

 

 

 

 

101.PRE

 

XBRL Taxonomy Extension Presentation Linkbase Document.

 

 

 

 

 

 

 

 

 

X

 

Certain portions of this exhibit have been omitted because they are both not material and would be competitively harmful if publicly disclosed.

 

*

The certification attached as Exhibit 32.1 that accompanies this Quarterly Report on Form 10-Q is not deemed filed with the Securities and Exchange Commission and is not to be incorporated by reference into any filing of Accuray Incorporated under the Securities Act or the Securities Exchange Act of 1934, as amended, whether made before or after the date of this Quarterly Report on Form 10-Q, irrespective of any general incorporation language contained in such filing.

60


 

SIGNATURES

 

Pursuant to the requirements of the Securities Exchange Act of 1934, as amended, the registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.

 

 

ACCURAY INCORPORATED

 

 

Date: November 6, 2019

 

 

By:

/s/ Joshua H. Levine

 

 

Joshua H. Levine

 

 

President and Chief Executive Officer

 

 

(Principal Executive Officer)

 

 

 

 

 

By:

/s/ Shig Hamamatsu

 

 

Shig Hamamatsu

 

 

Chief Financial Officer

 

 

(Principal Financial Officer)

 

61

EXHIBIT 10.1

 

[*****] = Certain information contained in this document, marked by brackets, has been excluded from this exhibit because it is both (i) not material and (ii) would be competitively harmful if publicly disclosed.

 

AMENDMENT NO. 4 TO CREDIT AND SECURITY AGREEMENT (TERM)

THIS AMENDMENT NO. 4 TO CREDIT AND SECURITY AGREEMENT (this “Amendment”) is made as of this 30th day of August, 2019 (the “Fourth Amendment Effective Date”), by and among MIDCAP FINANCIAL TRUST, a Delaware statutory trust, individually as Agent, and the financial institutions or other entities from time to time parties hereto, each as a Lender, the lenders (individually, each a “Lender” and collectively, the “Lenders”) party to the Credit Agreement (as defined below), ACCURAY INCORPORATED, a Delaware corporation (“Accuray” or “Borrower Representative”), TOMOTHERAPY INCORPORATED, a Wisconsin corporation, and any additional borrower that may hereafter be added to this Agreement (collectively, “Other Borrowers” and, together with Borrower Representative, each individually as a “Borrower”, and collectively as “Borrowers”).

RECITALS

A.Borrowers, Agent and the Lenders are party to that certain Credit and Security Agreement dated as of December 15, 2017 (as previously amended and modified, as amended hereby, and as may be further amended, supplemented, restated or otherwise modified from time to time, the “Credit Agreement”), pursuant to which Lenders agreed to make available to Borrowers a term loan facility.  Capitalized terms used but not defined in this Amendment shall have the meanings that are set forth in the Credit Agreement, as amended hereby.

B.Borrowers have requested an additional incremental term loan and, in connection with the funding thereof, Borrowers, Agent and Lenders have agreed to allocate the Term Loans into three separate tranches based on when they were funded.

C.In connection with such request, the parties now agree to amend and modify the Credit Agreement all in accordance with the terms and conditions set forth below.

NOW, THEREFORE, in consideration of the foregoing, the terms and conditions set forth in this Amendment, and other good and valuable consideration, the receipt and sufficiency of which are hereby acknowledged, Agent, Lenders and Borrowers hereby agree as follows:

1.Consent to Term Loan Tranche 3 Commitment.  

(a)Each Lender consents to the making of a Term Loan Tranche 3 (as defined in Section 2 below) by those Lenders having a Term Loan Tranche 3 Commitment (as defined in Section 2 below).  For purposes of clarity Term Loan Tranche 3 shall be funded as follows on the Fourth Amendment Effective Date: (A) MidCap Funding VI Trust shall fund $16,000,000, (B) MidCap Funding XIII Trust shall fund $8,500,000 and (B) Flexpoint MCLS Holdings LLC shall fund $500,000.

2.Specific Amendments to Credit Agreement.

(a)New definitions of Fourth Amendment Effective Date, Term Loan Tranche 1, Term Loan Tranche 1 Commitment Amount, Term Loan Tranche 1 Commitments, Term Loan Tranche 2, Term Loan Tranche 2 Commitment Amount, Term Loan Tranche 2 Commitments, Term Loan Tranche 3, Term Loan Tranche 3 Commitment Amount and Term Loan Tranche 3 Commitments are added to Section 1.1 of the Credit Agreement in alphabetical order to read as follows:

 

 


 

““Fourth Amendment Effective Date” means August 30, 2019.

““Term Loan Tranche 1” has the meaning set forth in Section 2.1(a)(i)(A).”

““Term Loan Tranche 1 Commitment Amount” means, with respect to each Lender, the amount set forth opposite such Lender’s name on Annex A hereto under the caption “Term Loan Tranche 1 Commitment Amount”, as amended from time to time to reflect any permitted and effective assignments and as such amount may be reduced or terminated pursuant to this Agreement.”  

““Term Loan Tranche 1 Commitments” means the sum of each Lender’s Term Loan Tranche 1 Commitment Amount.”

Term Loan Tranche 2” has meaning set forth in Section 2.1(a)(ii)(B).

Term Loan Tranche 2 Commitment Amount” means, with respect to each Lender, the amount set forth opposite such Lender’s name on Annex A hereto under the caption “Term Loan Tranche 2 Commitment Amount”, as amended from time to time to reflect any permitted and effective assignments and as such amount may be reduced or terminated pursuant to this Agreement.  

Term Loan Tranche 2 Commitments” means the sum of each Lender’s Term Loan Tranche 2 Commitment Amount.

““Term Loan Tranche 3” has the meaning set forth in Section 2.1(a)(i)(A).”

““Term Loan Tranche 3 Commitment Amount” means, with respect to each Lender, the amount set forth opposite such Lender’s name on Annex A hereto under the caption “Term Loan Tranche 3 Commitment Amount”, as amended from time to time to reflect any permitted and effective assignments and as such amount may be reduced or terminated pursuant to this Agreement.”  

““Term Loan Tranche 3 Commitments” means the sum of each Lender’s Term Loan Tranche 3 Commitment Amount.”

(b)The definitions of Applicable Margin, Excluded Property, Term Loan, Term Loans, Term Loan Commitment Amount and Term Loan Commitment Percentage in Section 1.1 of the Credit Agreement are hereby deleted in their entirety and restated to read as follows:

““Applicable Margin” means with respect to Term Loans and all other Obligations  six and three-quarters of one percent (6.75%).”

““Excluded Property” means (a) voting stock of each Excluded Subsidiary that is a Foreign Subsidiary or FSHCO directly held by any Borrower in excess of 65%, to the extent any material adverse tax consequence to a Borrower or any of its Affiliates could reasonably be expected to result from pledging such excess amount, as reasonably determined by the Borrower Representative in consultation

 

2

 

 


 

with Agent (provided that, for the avoidance of doubt, Borrowers shall pledge such amount in excess of 65% of the voting stock of such Excluded Subsidiary, if any, that could not reasonably be expected to result in a material adverse tax consequence to a Borrower or any of its Affiliates); (b) any lease, license, contract, permit, letter of credit, instrument, or agreement to which a Borrower is a party or any of its rights or interests thereunder if and to the extent that the grant of such security interest shall constitute or result in (i) the abandonment, invalidation or unenforceability of any right, title or interest of any Borrower therein or (ii) result in a breach or termination pursuant to the terms of, or a default under, any such lease, license, contract, permit, agreement or other property right (other than to the extent that any such term would be rendered ineffective pursuant to Sections 9-406, 9-407, 9-408 or 9-409 of the UCC of any relevant jurisdiction or any other applicable law); provided, however, that such security interest or lien (x) shall attach immediately at such time as the condition causing such abandonment, invalidation or unenforceability shall be remedied, (y) to the extent severable, shall attach immediately to each term of such lease, license, contract, property rights or agreement that does not result in any of the consequences specified in (i) or (ii) above and (z) shall attach immediately to each such lease, license, contract, property rights or agreement to which the Account Debtor or the Borrower’s counterparty has consented to such attachment; (c) any asset, including any asset that is the subject of any Permitted Debt contemplated by subpart (c) of the definition thereof, the grant of a security interest in which would result in (i) the abandonment, invalidation or unenforceability of any right, title or interest of any Credit Party therein or (ii) result in a breach or termination pursuant to the terms of, or a default under, any contract relating to such asset (other than to the extent that any such term would be rendered ineffective pursuant to Sections 9-406, 9-407, 9-408 or 9-409 of the UCC of any relevant jurisdiction or any other applicable law); provided, however, that such security interest or lien (x) shall attach immediately at such time as the condition causing such abandonment, invalidation or unenforceability shall be remedied, (y) to the extent severable, shall attach immediately to each term of such asset that does not result in any of the consequences specified in (i) or (ii) above and (z) shall attach immediately to each such asset to which the Account Debtor or the Borrower’s counterparty has consented to such attachment; (d) any real estate asset that (i) is a leasehold interest, or (ii) is not Material Real Property; (e) any assets located outside the United States (other than with respect to the equity interests of any direct Foreign Subsidiary of a Borrower) that require action under the law of any jurisdiction other than the United States to create or perfect a security interest in such assets under such jurisdiction other than the United States, including any Intellectual Property registered in any jurisdiction other than the United States, if the creation of pledges of, or security interests in, any such property or assets would reasonably be expected to result in material adverse income tax consequences to Borrower Representative and its Subsidiaries, as reasonably determined by Agent; (f) any motor vehicle, airplane or any other asset subject to a certificate of title to the extent a Lien therein cannot be perfected by the filing of a UCC financing statement; and (g) any “intent-to-use” trademark or service mark

 

3

 

 


 

application for which an amendment to allege use or statement of use has not been filed under 15 U.S.C. § 1051(c) or 15 U.S.C. § 1051(d), respectively, or if filed, has not been deemed in conformance with 15 U.S.C. § 1051(a) or examined and accepted, respectively by the United States Patent and Trademark Office.”

““Term Loan” and “Term Loans” means, collectively, the Term Loan Tranche 1, the Term Loan Tranche 2 and the Term Loan Tranche 3.”

““Term Loan Commitment Amount” means, with respect to each Lender, the sum of such Lender’s Term Loan Tranche 1 Commitment Amount, Term Loan Tranche 2 Commitment Amount and Term Loan Tranche 3 Commitment Amount.”

““Term Loan Commitment Percentage” means, as to any Lender with respect to each of such Lender’s Term Loan Commitment Amount, (a) on the Closing Date with respect to each tranche of the Term Loan, the applicable percentage set forth opposite such Lender’s name on the Commitment Annex under the column “Term Loan Tranche 1 Commitment Percentage” and “Term Loan Tranche 2 Commitment Percentage”, and (b) on any date following the Closing Date (including on the Fourth Amendment Effective Date), as applicable to each tranche of Term Loan, the percentage equal to (i) the Term Loan Tranche 1 Commitment of such Lender on such date divided by the aggregate Term Loan Tranche 1 Commitments on such date, (ii) the Term Loan Tranche 2 Commitment of such Lender on such date divided by the aggregate Term Loan Tranche 2 Commitments on such date or (iii) the Term Loan Tranche 3 Commitment of such Lender on such date divided by the aggregate Term Loan Tranche 3 Commitments on such date”

(c)Section 2.1(a)(i) of the Credit Agreement is hereby deleted in its entirety and restated to read as follows:

“(i)Term Loan Amounts.  

(A)On the terms and subject to the conditions set forth herein, each Lender with a Term Loan Tranche 1 Commitment made to Borrowers a term loan on the Closing Date in an original aggregate principal amount equal to $40,000,000 (the “Term Loan Tranche 1”).  

(B)On the terms and subject to the conditions set forth herein and in the other Financing Documents, each Lender with a Term Loan Tranche 2 Commitment made to Borrowers a term loan, which was made in two installments on and prior to the Third Amendment Effective Date, in an original aggregate amount of $20,461,166 (the “Term Loan Tranche 2”);

(C) On the terms and subject to the conditions set forth herein, each Lender with a Term Loan Tranche 3 Commitment severally hereby agrees to make to Borrowers a term loan on the Fourth Amendment Effective Date in an original aggregate principal amount of $25,000,000 (the “Term Loan Tranche 3”). Each such Lender’s obligation to fund the Term Loan Tranche 3 shall be limited to such Lender’s Term Loan Commitment Percentage of the Term Loan Tranche 3, and no Lender shall have any obligation to fund any portion of any Term Loan required to be funded by any other Lender, but not so funded.  

 

4

 

 


 

(D) No Borrower shall have any right to reborrow any portion of the Term Loan that is repaid or prepaid from time to time.  Borrowers shall deliver to Agent a Notice of Borrowing with respect to each proposed Term Loan advance, such Notice of Borrowing to be delivered no later than noon (Eastern time) two (2) Business Days prior to such proposed borrowing; provided that for the borrowing of the Term Loan on the Closing Date, Borrower may deliver the Notice of Borrowing on the Closing Date; provided further that, with respect to Term Loan Tranche 2, Borrowers further shall provide Agent written notice of its intent to borrow not less than thirty (30) days prior to such proposed borrowing, which notice shall set forth the proposed date of borrowing, except in connection with the $5,000,000 advance of the Term Loan Tranche 2 on the Second Amendment Effective Date when such prior notice shall not be required.

(d)Section 2.2(g) of the Credit Agreement is hereby deleted in its entirety and restated to read as follows:

“(g)Prepayment Fee. If any advance under the Term Loan is prepaid at any time, in whole or in part, for any reason (whether by voluntary prepayment by Borrowers, by reason of the occurrence of an Event of Default or the acceleration of the Term Loan, or otherwise), or if the Term Loan shall become accelerated and due and payable in full, Borrowers shall pay to Agent, for the benefit of all Lenders committed to make Term Loan advances, as compensation for the costs of such Lenders making funds available to Borrowers under this Agreement, a prepayment fee (the “Prepayment Fee”) calculated in accordance with this subsection.  The Prepayment Fee in respect of the Term Loan Tranche 1 and the Term Loan Tranche 2 shall be equal to an amount determined by multiplying the amount being prepaid (or required to be prepaid, if such amount is greater) by the following applicable percentage amount:  (w) three percent (3.0%) for the first year following the Third Amendment Effective Date, (x) two percent (2.0%) for the second year following the Third Amendment Effective Date, (y) one percent (1.0%) thereafter. The Prepayment Fee in respect of the Term Loan Tranche 3 shall be equal to an amount determined by multiplying the amount being prepaid (or required to be prepaid, if such amount is greater) by the following applicable percentage amount:  (w) three percent (3.0%) for the first year following the Fourth Amendment Effective Date, (x) two percent (2.0%) for the second year following the Fourth Amendment Effective Date, (y) one percent (1.0%) thereafter.  The Prepayment Fee shall not apply to or be assessed upon any prepayment made by Borrowers if such payments were required by Agent to be made pursuant to Section 2.1(a)(ii)(B) subpart (i) (relating to casualty proceeds), or subpart (ii) (relating to payments exceeding the Maximum Lawful Rate). All fees payable pursuant to this paragraph shall be deemed fully earned and non-refundable as of the Closing Date or, if later, on as of the date the applicable Term Loan was funded.”

 

5

 

 


 

(e)Section 4.11(e) of the Credit Agreement is hereby amended by deleting it in its entirety and restating it as follows:

“(e)Upon the request of Agent, Borrowers shall pledge, have pledged or cause or have caused to be pledged to Agent pursuant to a pledge agreement in form and substance satisfactory to Agent, 65% (or such greater percentage that could not reasonably be expected to cause any material adverse tax consequence to a Borrower or any of its Affiliates, as reasonably determined by the Borrower Representative in consultation with Agent) of the outstanding shares of equity interests or other equity interests of any Foreign Subsidiary owned directly by any Borrower and, subject to the Excluded Perfection Assets, undated stock or equivalent powers for such certificates, if any, executed in blank.”

(f)Section 6.2 of the Credit Agreement is hereby deleted in its entirety and restated to read as follows:

“Section 6.2Fixed Charge Coverage Ratio.  Borrowers will not permit the Fixed Charge Coverage Ratio for any Defined Period, as tested quarterly (as of the last day of such fiscal quarter), beginning with the first full fiscal quarter ending after the Closing Date, to be less than the applicable ratio set forth below opposite the applicable fiscal quarter:

 

Fiscal Quarter Ended

Ratio

December 31, 2017

0.80 to 1.00

March 31, 2018

1.00 to 1.00

June 30, 2018

0.75 to 1.00

September 30, 2018

0.50 to 1.00

December 31, 2018

0.50 to 1.00

March 31, 2019

1.00 to 1.00

June 30, 2019

1.00 to 1.00

September 30, 2019

0.75 to 1.00

December 31, 2019

0.80 to 1.00

March 31, 2020

0.85 to 1.00

June 30, 2020 and each fiscal quarter thereafter

1.00 to 1.00

 

 

6

 

 


 

(g)Section 6.3 of the Credit Agreement is hereby deleted in its entirety and restated to read as follows:

“Section 6.3Minimum Net Revenue.  Borrowers shall not permit its consolidated Net Revenue for any Defined Period, as tested quarterly (as of the last day of such Defined Period), to be less than $390,000,000.”

(h)Section 6.4 of the Credit Agreement is hereby deleted in its entirety and restated to read as follows:

“Section 6.4   Minimum Consolidated Cash Balance.  Borrowers and their Subsidiaries shall maintain at all times, in Deposit Accounts and Securities Accounts, unrestricted and unencumbered (other than Liens in favor of Agent and the agent under the Affiliated Credit Agreement) cash-on-hand and Cash Equivalents in an aggregate amount of no less than $20,000,000.”

(i)A new Section 6.5 is hereby inserted into the Credit Agreement, in proper numerical order, to read as follows:

“Section 6.5   Minimum Consolidated Domestic Cash Balance.  Borrowers and shall maintain at all times, in domestic Deposit Accounts subject to Deposit Account Control Agreements, unrestricted and unencumbered (other than Liens in favor of Agent and the agent under the Affiliated Credit Agreement) cash-on-hand in an aggregate amount of no less than $10,000,000.”

(j)A new Section 6.6 is hereby inserted into the Credit Agreement, in proper numerical order, to read as follows:

“Section 6.6Evidence of Compliance.  Borrowers shall furnish to Agent, together with the financial reporting required of Borrowers in Section 4.1 hereof, a Compliance Certificate as evidence of Borrowers’ compliance with the covenants in this Article and evidence that no Event of Default specified in this Article has occurred.  The Compliance Certificate shall include, without limitation, (a) a statement and report, on a form approved by Agent, detailing Borrowers’ calculations, and (b) if requested by Agent, back-up documentation (including, without limitation, invoices, receipts and other evidence of costs incurred during such quarter as Agent shall reasonably require) evidencing the propriety of the calculations.”

(k)The proviso in the last paragraph of Section 11.16 of the Credit Agreement is hereby deleted in its entirety and restated to read as follows:

provided, however, that, in each of (i) and (ii) above, no such amendment, waiver or other modification shall, unless signed or otherwise approved in writing by all Lenders directly affected thereby, (A) reduce the principal of, rate of interest on or any fees with respect to any Loan or forgive any principal, interest (other than default interest) or fees (other than late charges) with respect to any Loan; (B) postpone the date fixed for, or waive, any payment (other than any

 

7

 

 


 

mandatory prepayment pursuant to Section 2.1(b)(ii)) of principal of any Loan, or of interest on any Loan (other than default interest) or any fees provided for hereunder (other than late charges) or postpone the date of termination of any commitment of any Lender hereunder; (C) change the definition of the term Required Lenders or the percentage of Lenders which shall be required for Lenders to take any action hereunder; (D) release all or substantially all of the Collateral, authorize any Borrower to sell or otherwise dispose of all or substantially all of the Collateral or release any Guarantor of all or any portion of the Obligations or its Guarantee obligations with respect thereto, except, in each case with respect to this clause (D), as otherwise may be provided in this Agreement or the other Financing Documents (including in connection with any disposition permitted hereunder); (E) amend, waive or otherwise modify this Section 11.16(b) or the definitions of the terms used in this Section 11.16(b) insofar as the definitions affect the substance of this Section 11.16(b); (F) consent to the assignment, delegation or other transfer by any Credit Party of any of its rights and obligations under any Financing Document or release any Borrower of its payment obligations under any Financing Document, except, in each case with respect to this clause (F), pursuant to a merger or consolidation permitted pursuant to this Agreement; or (G) amend any of the provisions of Section 10.7 or amend any of the definitions of Pro Rata Share, Term Loan Commitment, Term Loan Tranche 1 Commitments, Term Loan Tranche 2 Commitments, Term Loan Tranche 3 Commitments, Term Loan Commitment Amount, Term Loan Tranche 1 Commitment Amount, Term Loan Tranche 2 Commitment Amount, Term Loan Commitment Percentage, or that provide for Lenders to receive their Pro Rata Shares of any fees, payments, setoffs or proceeds of Collateral hereunder.  It is hereby understood and agreed that all Lenders shall be deemed directly affected by an amendment, waiver or other modification of the type described in the preceding clauses (C), (D), (E), (F) and (G) of the preceding sentence.

(l)Annex A to the Credit Agreement is hereby deleted in its entirety and restated with Annex A attached hereto.

(m)Each reference to “Term Loan” on Schedule 2.1 to the Credit Agreement is hereby deleted in its entirety and replaced with “Term Loan(s)”.

(n)Schedule 9.2 to the Credit Agreement is hereby deleted in its entirety and restated with Schedule 9.2 attached hereto.

3.Reaffirmation of Security Interest.  Each Borrower hereby expressly acknowledges and agrees that all Liens granted under the Financing Documents extend to and cover all of the obligations of Borrowers and any other Credit Party to Agent and the Lenders, now existing or hereafter arising including, without limitation, those arising in connection with the Credit Agreement, as amended by this Amendment, upon the terms set forth in the Credit Agreement, all of which Liens are hereby ratified, reaffirmed, confirmed and approved.

4.Enforceability.  This Amendment constitutes the legal, valid and binding obligation of Borrowers, and is enforceable against Borrowers in accordance with its terms,

 

8

 

 


 

except as the enforceability thereof may be limited by bankruptcy, insolvency or other similar laws relating to the enforcement of creditors’ rights generally and by general equitable principles.  Each of the agreements, documents and instruments executed in connection herewith to which a Borrower is a party constitutes the legal, valid and binding obligation of such Borrower, and is enforceable against such Borrower in accordance with its terms, except as the enforceability thereof may be limited by bankruptcy, insolvency or other similar laws relating to the enforcement of creditors’ rights generally and by general equitable principles.

5.Confirmation of Representations and Warranties.  Each Credit Party represents and warrants to Agent and Lenders that, before and after giving effect to this Amendment:

(a)the representations and warranties of each Credit Party contained in the Financing Documents are true, correct and complete in all material respects (or, if such representation or warranty is, by its terms, qualified by materiality, in all respects) on and as of the date hereof, except to the extent that any such representation or warranty relates to a specific date in which case such representation or warranty is true, correct and complete in all material respects (or, if such representation or warranty is, by its terms, qualified by materiality, in all respects) as of such earlier date.

(b)The execution and delivery by each Credit Party of this Amendment and the performance by it of the transactions herein contemplated (i) are and will be within its powers, (ii) have been authorized by all necessary action, (iii) are not and will not conflict with or result in any breach or contravention of, or the creation of any Lien under, any Material Contract to which any Credit Party is a party, any Organizational Document of any Credit Party, any order, injunction, writ or decree of any Governmental Authority or any arbitral award to which any Credit Party or the property of any Credit Party is subject, (iv) will not violate any applicable Law (including, without limitation, any corporation law, limited liability company law or partnership law of the states in which the Credit Parties are organized), and (v) will not result in a limitation on any material licenses, permits or other governmental approvals applicable to the business, operations or properties of any Credit Party.

(c)This Amendment and all allonges, assignments, instruments, documents, and agreements executed and delivered in connection herewith, are and will be valid, binding, and enforceable against each Credit Party in accordance with their respective terms, except as enforceability may be limited by bankruptcy, insolvency or other similar laws relating to the enforcement of creditors’ rights generally and by general equitable principles.

(d)No Event of Default or Default has occurred and is continuing as of the date of this Amendment.

(e)Both before and after giving effect to (a) the Loans to be made or extended on the date hereof, (b) the disbursement of the proceeds of such Loans pursuant to the instructions of the Credit Parties, (c) the consummation of the transactions contemplated in the Financing Documents, and (e) the payment and accrual of all transaction costs in connection with the foregoing, the Credit Parties, taken as a whole, are Solvent.

 

9

 

 


 

6.Conditions to Effectiveness.  The obligation of Agent and Lenders to enter into this Amendment shall be subject to the satisfaction of the following conditions precedent:

(a)that Agent shall have received a copy of this Amendment, duly executed by Borrowers, Agent and each Lender, in form and substance satisfactory to Agent;

(b)that Agent shall have received a copy of Amendment No. 3 to the Fee Letter, duly executed by Borrowers and Agent; and

(c)that Agent shall have received a copy of the corresponding amendment to the Affiliated Credit Agreement duly executed by the parties thereto, in form and substance satisfactory to Agent.

7.Costs, Fees and Expenses.  In consideration of Agent’s and each Lender’s agreement to enter into this Amendment, Borrowers shall be responsible for the payment of all reasonable costs, fees and expenses of Agent’s counsel incurred in connection with the preparation of this Amendment and any related documents.  All such costs, fees and expenses shall be paid with proceeds of Revolving Loans.

8.Defenses and Setoffs.  Each Credit Party hereby represents and warrants that as of the date hereof, there are no defenses, setoffs, claims or counterclaims which could be asserted against the Agent or the Lenders arising from or in connection with the Credit Agreement or any other Financing Document.  

9.Affirmation.  Except as specifically amended pursuant to the terms hereof, the Credit Agreement and all other Financing Documents (and all covenants, terms, conditions and agreements therein) shall remain in full force and effect, and are hereby ratified and confirmed in all respects by Borrowers.  Each Borrower covenants and agrees to comply with all of the terms, covenants and conditions of the Credit Agreement (as amended hereby) and the Financing Documents notwithstanding any prior course of conduct, waivers, releases or other actions or inactions on Agent’s or any Lender’s part which might otherwise constitute or be construed as a waiver of or agreement to such terms, covenants and conditions.  

10.No Waiver or Novation.  The execution, delivery and effectiveness of this Amendment shall not operate as a waiver of any right, power or remedy of Agent or Lenders, nor constitute a waiver of any provision of the Credit Agreement, the other Financing Documents or any other documents, instruments and agreements executed or delivered in connection with any of the foregoing.  Nothing herein is intended or shall be construed as a waiver of any existing Defaults or Events of Default under the Credit Agreement or other Financing Documents or any of Agent’s or Lenders’ rights and remedies in respect of such Defaults or Events of Default.  This Amendment (together with any other document executed in connection herewith) is not intended to be, nor shall it be construed as, a novation of the Credit Agreement.

11.Incorporation of Credit Agreement Provisions.  The provisions contained in Section 12.8 (Governing Law; Submission to Jurisdiction) and 12.9 (Waiver of Jury Trial) of the Credit Agreement are incorporated herein by reference to the same extent as if reproduced herein in their entirety.

 

10

 

 


 

12.Headings.  Section headings in this Amendment are included for convenience of reference only and shall not constitute a part of this Amendment for any other purpose.

13.Counterparts.  This Amendment may be executed in counterparts, and such counterparts taken together shall be deemed to constitute one and the same instrument.  Signatures by facsimile or by electronic mail delivery of an electronic version of any executed signature page shall bind the parties hereto.

14.Reference to the Effect on the Financing Documents.  Upon the effectiveness of this Amendment, each reference in any Financing Document to “this Amendment,” “hereunder,” “hereof,” “herein” or words of similar import shall mean and be a reference to such Financing Document as modified by this Amendment.  

(SIGNATURES APPEAR ON FOLLOWING PAGES)

 

 

11

 

 


 

IN WITNESS WHEREOF, intending to be legally bound, the undersigned have executed this Amendment as of the day and year first hereinabove set forth.

 

BORROWER REPRESENTATIVE:

ACCURAY INCORPORATED,

 

a Delaware corporation

 

 

 

 

 

 

 

By:

/s/ Shigeyuki Hamamatsu

 

 

Shigeyuki Hamamatsu

 

 

Chief Financial Officer

 

OTHER BORROWERS:

TOMOTHERAPY INCORPORATED,

 

a Wisconsin corporation

 

 

 

 

 

 

 

By:

/s/ Shigeyuki Hamamatsu

 

 

Shigeyuki Hamamatsu

 

 

Director

 


 

 

 

SIGNATURE PAGE TO AMENDMENT

NO. 4 TO CREDIT AND SECURITY

AGREEMENT (TERM)

 


 

 

AGENT:

MIDCAP FINANCIAL TRUST,

 

a Delaware statutory trust

 

 

 

 

 

By: Apollo Capital Management, L.P.

 

 

Its: Investment Manager

 

 

 

 

 

 

 

By: Apollo Capital Management GP, LLC

 

 

 

Its:  General Partner

 

 

 

 

 

 

 

 

 

 

 

 

By:

/s/ Maurice Amsellem

 

 

 

 

 

Maurice Amsellem

 

 

 

 

 

Authorized Signatory

 

LENDERS:

MIDCAP FUNDING XIII TRUST,

 

a Delaware statutory trust

 

 

 

 

 

By: Apollo Capital Management, L.P.

 

 

Its: Investment Manager

 

 

 

 

 

 

 

By: Apollo Capital Management GP, LLC

 

 

 

Its:  General Partner

 

 

 

 

 

 

 

 

 

 

 

 

By:

/s/ Maurice Amsellem

 

 

 

 

 

Maurice Amsellem

 

 

 

 

 

Authorized Signatory

 

 

 

MIDCAP FUNDING IV TRUST,

 

a Delaware statutory trust

 

 

 

 

 

By: Apollo Capital Management, L.P.

 

 

Its: Investment Manager

 

 

 

 

 

 

 

By: Apollo Capital Management GP, LLC

 

 

 

Its:  General Partner

 

 

 

 

 

 

 

 

 

 

 

 

By:

/s/ Maurice Amsellem

 

 

 

 

 

Maurice Amsellem

 

 

 

 

 

Authorized Signatory

 

 

 

 

 

 

SIGNATURE PAGE TO AMENDMENT

NO. 4 TO CREDIT AND SECURITY

AGREEMENT (TERM)

 


 

 

LENDERS:

MIDCAP FUNDING VI TRUST,

 

a Delaware statutory trust

 

 

 

 

 

By: Apollo Capital Management, L.P.

 

 

Its: Investment Manager

 

 

 

 

 

 

 

By: Apollo Capital Management GP, LLC

 

 

 

Its:  General Partner

 

 

 

 

 

 

 

 

 

 

 

 

By:

/s/ Maurice Amsellem

 

 

 

 

 

Maurice Amsellem

 

 

 

 

 

Authorized Signatory

 

LENDERS:

Flexpoint MCLS HOLDINGS LLC

 

 

 

 

 

 

 

By:

/s/ Daniel Edelman

 

 

Daniel Edelman

 

 

Authorized Signatory

 

 

LENDERS:

ELM 2016-1 TRUST

 

 

 

 

 

 

 

By: MidCap Financial Services Capital Management, LLC

 

 

Its: Servicer

 

 

 

 

 

 

 

 

 

 

 

By:

/s/ John O’Dea

 

 

 

 

John O’Dea

 

 

 

 

Authorized Signatory

 

LENDERS:

ELM 2018-2 TRUST

 

 

 

 

 

 

 

By: MidCap Financial Services Capital Management, LLC

 

 

Its: Servicer

 

 

 

 

 

 

 

 

 

 

 

By:

/s/ John O’Dea

 

 

 

 

John O’Dea

 

 

 

 

Authorized Signatory

 

 

 

 

 

SIGNATURE PAGE TO AMENDMENT

NO. 4 TO CREDIT AND SECURITY

AGREEMENT (TERM)

 


 

Annex A to Credit Agreement (Commitment Annex)

 

Lender

Term Loan Tranche 1 Commitment Amount

Term Loan Tranche 1 Commitment Percentage

Term Loan Tranche 2 Commitment Amount

Term Loan Tranche 2 Commitment Percentage

Term Loan Tranche 3 Commitment Amount

Term Loan Tranche 3 Commitment Percentage

MidCap Funding IV Trust

 

$4,000,000.00

10.0000000%

$19,627,832.67

95.9272442%

$0

0%

MidCap Funding VI Trust

 

$13,333,333.33

33.3333333%

$0

0%

$16,000,000.00

64.0000000%

MidCap Funding XIII Trust

 

$6,500,000.00

16.2500000%

$0

0%

$8,500,000.00

34.0000000%

ELM 2018-2 Trust

 

$10,000,000.00

25.0000000%

$0

0%

$0

0%

ELM 2016-1 Trust

 

$4,500,000.00

11.2500000%

$0

0%

$0

0%

Flexpoint MCLS Holdings LLC

 

$1,666,666.67

4.1666667%

$833,333.33

4.0727558%

$500,000.00

2.0000000%

TOTALS

$40,000,000.00

100%

20,461,166.00

100%

$25,000,000

100%

 

 

 

 


 

 

 

Schedule 9.2
Location of Collateral

Company

Chief Executive Office

Chief Place of Business

Books and Records

Accuray Incorporated

1310 Chesapeake Terrace
Sunnyvale, CA 94089

1310 Chesapeake Terrace
Sunnyvale, CA 94089

1310 Chesapeake Terrace
Sunnyvale, CA 94089

1209 Deming Way
Madison, WI 53717

TomoTherapy Incorporated

1310 Chesapeake Terrace
Sunnyvale, CA 94089

1310 Chesapeake Terrace
Sunnyvale, CA 94089

1310 Chesapeake Terrace
Sunnyvale, CA 94089

1209 Deming Way
Madison, WI 53717

 


 


 

Inventory by Location

Street Address

Category

City

State or
Country

Zip Code

Nature of such
Location

Managed by

Name and address
of 3rd party

Inventory Balance as of
July 31, 2019

 

 

 

 

 

 

 

 

 

[*****]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

 

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

 

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

 

[*****]

[*****]

[*****]

[*****]

 

 

 

 

 

 

 

 

 

[*****]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

 

 

 

 

 

 

 

 

 

[*****]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

 

 

 

 

 

 

 

Grand Total

[*****]


[*****] = Certain information contained in this document, marked by brackets, has been excluded from this exhibit because it is both (i) not material and (ii) would be competitively harmful if publicly disclosed.


 

Inventory 7/31/19

 

Inventory

 

[*****]

 

[*****]

[*****]

 

[*****]

[*****]

 

[*****]

[*****]

 

[*****]

[*****]

 

[*****]

[*****]

 

[*****]

[*****]

 

[*****]

[*****]

 

[*****]

 

 

[*****]

 

 

 

Less: Ineligible Inventory

 

[*****]

 

[*****]

[*****]

 

[*****]

[*****]

 

[*****]

[*****]

 

[*****]

[*****]

 

[*****]

[*****]

 

[*****]

[*****]

 

[*****]

[*****]

 

[*****]

[*****]

 

[*****]

Total Ineligible Inventory

[*****]

 

 

 

Total Eligible Inventory

[*****]

[*****]

 

[*****]

[*****]

 

[*****]

[*****]

 

 

 

 

 

Total Inventory Availability (before Total Availability Limit)

[*****]

 

 

 

Maximum Inventory Availability

 

Total Inventory Availability

[*****]

 

[*****] = Certain information contained in this document, marked by brackets, has been excluded from this exhibit because it is both (i) not material and (ii) would be competitively harmful if publicly disclosed.

EXHIBIT 10.2

 

[*****] = Certain information contained in this document, marked by brackets, has been excluded from this exhibit because it is both (i) not material and (ii) would be competitively harmful if publicly disclosed.

 

Amendment No. 5 TO CREDIT AND SECURITY AGREEMENT (REVOLVER)

THIS AMENDMENT NO. 5 TO CREDIT AND SECURITY AGREEMENT (this “Amendment”) is made as of this 30th day of August, 2019, by and among MIDCAP FUNDING IV TRUST, a Delaware statutory trust (as successor by assignment from MidCap Funding X Trust, as successor by assignment from MidCap Funding IV Trust, as successor by assignment from MidCap Financial Trust), individually as a Lender, and as Agent, and the financial institutions or other entities from time to time parties hereto, each as a Lender., the lenders (individually, each a “Lender” and collectively, the “Lenders”) party to the Credit Agreement (as defined below), ACCURAY INCORPORATED, a Delaware corporation (“Accuray” or “Borrower Representative”), TOMOTHERAPY INCORPORATED, a Wisconsin corporation, and any additional borrower that may hereafter be added to this Agreement (collectively, “Other Borrowers” and, together with Borrower Representative, each individually as a “Borrower”, and collectively as “Borrowers”).

RECITALS

A.Borrowers, Agent and the Lenders are party to that certain Credit and Security Agreement dated as of June 14, 2017, as previously amended and modified (as amended hereby, and as may be further amended, supplemented, restated or otherwise modified from time to time, the “Credit Agreement”), pursuant to which Lenders agreed to make available to Borrowers a revolving loan facility in the maximum principal amount of $32,000,000 at any time outstanding.  Capitalized terms used but not defined in this Amendment shall have the meanings that are set forth in the Credit Agreement, as amended hereby.

B.Borrowers have requested certain amendments to the Credit Agreement all as set forth herein.

C.The parties now agree to amend and modify the Credit Agreement all in accordance with the terms and conditions set forth below.

NOW, THEREFORE, in consideration of the foregoing, the terms and conditions set forth in this Amendment, and other good and valuable consideration, the receipt and sufficiency of which are hereby acknowledged, Agent, Lenders and Borrowers hereby agree as follows:

1.Specific Amendments to Credit Agreement.

(a)The definition of Excluded Property in Section 1.1 of the Credit Agreement is hereby deleted in its entirety and restated to read as follows:

““Excluded Property” means (a) voting stock of each Excluded Subsidiary that is a Foreign Subsidiary or FSHCO directly held by any Borrower in excess of 65%, to the extent any material adverse tax consequence to a Borrower or any of its Affiliates could reasonably be expected to result from pledging such excess amount, as reasonably determined by the Borrower Representative in consultation with Agent (provided that, for the avoidance of doubt, Borrowers shall pledge such

 


 

amount in excess of 65% of the voting stock of such Excluded Subsidiary, if any, that could not reasonably be expected to result in a material adverse tax consequence to a Borrower or any of its Affiliates); (b) any lease, license, contract, permit, letter of credit, instrument, or agreement to which a Borrower is a party or any of its rights or interests thereunder if and to the extent that the grant of such security interest shall constitute or result in (i) the abandonment, invalidation or unenforceability of any right, title or interest of any Borrower therein or (ii) result in a breach or termination pursuant to the terms of, or a default under, any such lease, license, contract, permit, agreement or other property right (other than to the extent that any such term would be rendered ineffective pursuant to Sections 9-406, 9-407, 9-408 or 9-409 of the UCC of any relevant jurisdiction or any other applicable law); provided, however, that such security interest or lien (x) shall attach immediately at such time as the condition causing such abandonment, invalidation or unenforceability shall be remedied, (y) to the extent severable, shall attach immediately to each term of such lease, license, contract, property rights or agreement that does not result in any of the consequences specified in (i) or (ii) above and (z) shall attach immediately to each such lease, license, contract, property rights or agreement to which the Account Debtor or the Borrower’s counterparty has consented to such attachment; (c) any asset, including any asset that is the subject of any Permitted Debt contemplated by subpart (c) of the definition thereof, the grant of a security interest in which would result in (i) the abandonment, invalidation or unenforceability of any right, title or interest of any Credit Party therein or (ii) result in a breach or termination pursuant to the terms of, or a default under, any contract relating to such asset (other than to the extent that any such term would be rendered ineffective pursuant to Sections 9-406, 9-407, 9-408 or 9-409 of the UCC of any relevant jurisdiction or any other applicable law); provided, however, that such security interest or lien (x) shall attach immediately at such time as the condition causing such abandonment, invalidation or unenforceability shall be remedied, (y) to the extent severable, shall attach immediately to each term of such asset that does not result in any of the consequences specified in (i) or (ii) above and (z) shall attach immediately to each such asset to which the Account Debtor or the Borrower’s counterparty has consented to such attachment; (d) any real estate asset that (i) is a leasehold interest, or (ii) is not Material Real Property; (e) any assets located outside the United States (other than with respect to the equity interests of any direct Foreign Subsidiary of a Borrower) that require action under the law of any jurisdiction other than the United States to create or perfect a security interest in such assets under such jurisdiction other than the United States, including any Intellectual Property registered in any jurisdiction other than the United States, if the creation of pledges of, or security interests in, any such property or assets would reasonably be expected to result in material adverse income tax consequences to Borrower Representative and its Subsidiaries, as reasonably determined by Agent; (f) any motor vehicle, airplane or any other asset subject to a certificate of title to the extent a Lien therein cannot be perfected by the filing of a UCC financing statement; and (g) any “intent-to-use” trademark or service mark application for which an amendment to allege use or statement of use has not been filed under 15 U.S.C. § 1051(c) or 15 U.S.C. § 1051(d), respectively, or if filed, has not been deemed in conformance with 15 U.S.C. § 1051(a) or examined and accepted, respectively by the United States Patent and Trademark Office.

 


 

(b)Section 4.11(e) of the Credit Agreement is hereby amended by deleting it in its entirety and restating it as follows:

“(e)Upon the request of Agent, Borrowers shall pledge, have pledged or cause or have caused to be pledged to Agent pursuant to a pledge agreement in form and substance satisfactory to Agent, 65% (or such greater percentage that could not reasonably be expected to cause any material adverse tax consequence to a Borrower or any of its Affiliates, as reasonably determined by the Borrower Representative in consultation with Agent) of the outstanding shares of equity interests or other equity interests of any Foreign Subsidiary owned directly by any Borrower and, subject to the Excluded Perfection Assets, undated stock or equivalent powers for such certificates, if any, executed in blank.”

(c)Section 6.2 of the Credit Agreement is hereby deleted in its entirety and restated to read as follows:

“Section 6.2Fixed Charge Coverage Ratio.  Borrowers will not permit the Fixed Charge Coverage Ratio for any Defined Period, as tested quarterly (as of the last day of such fiscal quarter), beginning with the first full fiscal quarter ending after the Closing Date, to be less than the applicable ratio set forth below opposite the applicable fiscal quarter:

 

Fiscal Quarter Ended

Ratio

December 31, 2017

0.80 to 1.00

March 31, 2018

1.00 to 1.00

June 30, 2018

0.75 to 1.00

September 30, 2018

0.50 to 1.00

December 31, 2018

0.50 to 1.00

March 31, 2019

1.00 to 1.00

June 30, 2019

1.00 to 1.00

September 30, 2019

0.75 to 1.00

December 31, 2019

0.80 to 1.00

March 31, 2020

0.85 to 1.00

June 30, 2020 and each fiscal quarter thereafter

1.00 to 1.00

 

 


 

(d)Section 6.3 of the Credit Agreement is hereby deleted in its entirety and restated to read as follows:

“Section 6.3Minimum Net Revenue.  Borrowers shall not permit its consolidated Net Revenue for any Defined Period, as tested quarterly (as of the last day of such Defined Period), to be less than $390,000,000.”

(e)Section 6.4 of the Credit Agreement is hereby deleted in its entirety and restated to read as follows:

“Section 6.4   Minimum Consolidated Cash Balance.  Borrowers and their Subsidiaries shall maintain at all times, in Deposit Accounts and Securities Accounts, unrestricted and unencumbered (other than Liens in favor of Agent and the agent under the Affiliated Credit Agreement) cash-on-hand and Cash Equivalents in an aggregate amount of no less than $20,000,000.”

(f)A new Section 6.5 is hereby inserted into the Credit Agreement, in proper numerical order, to read as follows:

“Section 6.5   Minimum Consolidated Domestic Cash Balance.  Borrowers and shall maintain at all times, in domestic Deposit Accounts subject to Deposit Account Control Agreements, unrestricted and unencumbered (other than Liens in favor of Agent and the agent under the Affiliated Credit Agreement) cash-on-hand in an aggregate amount of no less than $10,000,000.”

(g)A new Section 6.6 is hereby inserted into the Credit Agreement, in proper numerical order, to read as follows:

“Section 6.6Evidence of Compliance.  Borrowers shall furnish to Agent, together with the financial reporting required of Borrowers in Section 4.1 hereof, a Compliance Certificate as evidence of Borrowers’ compliance with the covenants in this Article and evidence that no Event of Default specified in this Article has occurred.  The Compliance Certificate shall include, without limitation, (a) a statement and report, on a form approved by Agent, detailing Borrowers’ calculations, and (b) if requested by Agent, back-up documentation (including, without limitation, invoices, receipts and other evidence of costs incurred during such quarter as Agent shall reasonably require) evidencing the propriety of the calculations.”

(h)Schedule 9.2 to the Credit Agreement is hereby deleted in its entirety and restated with Schedule 9.2 attached hereto.

 


 

2.Reaffirmation of Security Interest.  Each Borrower hereby expressly acknowledges and agrees that all Liens granted under the Financing Documents extend to and cover all of the obligations of Borrowers and any other Credit Party to Agent and the Lenders, now existing or hereafter arising including, without limitation, those arising in connection with the Credit Agreement, as amended by this Amendment, upon the terms set forth in the Credit Agreement, all of which Liens are hereby ratified, reaffirmed, confirmed and approved.

3.Enforceability.  This Amendment constitutes the legal, valid and binding obligation of Borrowers, and is enforceable against Borrowers in accordance with its terms, except as the enforceability thereof may be limited by bankruptcy, insolvency or other similar laws relating to the enforcement of creditors’ rights generally and by general equitable principles.  Each of the agreements, documents and instruments executed in connection herewith to which a Borrower is a party constitutes the legal, valid and binding obligation of such Borrower, and is enforceable against such Borrower in accordance with its terms, except as the enforceability thereof may be limited by bankruptcy, insolvency or other similar laws relating to the enforcement of creditors’ rights generally and by general equitable principles.

4.Confirmation of Representations and Warranties.  Each Credit Party represents and warrants to Agent and Lenders that, before and after giving effect to this Amendment:

(a)the representations and warranties of each Credit Party contained in the Financing Documents are true, correct and complete in all material respects (or, if such representation or warranty is, by its terms, qualified by materiality, in all respects) on and as of the date hereof, except to the extent that any such representation or warranty relates to a specific date in which case such representation or warranty is true, correct and complete in all material respects (or, if such representation or warranty is, by its terms, qualified by materiality, in all respects) as of such earlier date.

(b)The execution and delivery by each Credit Party of this Amendment and the performance by it of the transactions herein contemplated (i) are and will be within its powers, (ii) have been authorized by all necessary action, (iii) are not and will not conflict with or result in any breach or contravention of, or the creation of any Lien under, any Material Contract to which any Credit Party is a party, any Organizational Document of any Credit Party, any order, injunction, writ or decree of any Governmental Authority or any arbitral award to which any Credit Party or the property of any Credit Party is subject, (iv) will not violate any applicable Law (including, without limitation, any corporation law, limited liability company law or partnership law of the states in which the Credit Parties are organized), and (v) will not result in a limitation on any material licenses, permits or other governmental approvals applicable to the business, operations or properties of any Credit Party.

(c)This Amendment and all allonges, assignments, instruments, documents, and agreements executed and delivered in connection herewith, are and will be valid, binding, and enforceable against each Credit Party in accordance with their respective terms, except as enforceability may be limited by bankruptcy, insolvency or other similar laws relating to the enforcement of creditors’ rights generally and by general equitable principles.

 


 

(d)No Event of Default or Default has occurred and is continuing as of the date of this Amendment.

(e)Both before and after giving effect to (a) the Loans to be made or extended on the date hereof, (b) the disbursement of the proceeds of such Loans pursuant to the instructions of the Credit Parties, (c) the consummation of the transactions contemplated in the Financing Documents, and (e) the payment and accrual of all transaction costs in connection with the foregoing, the Credit Parties, taken as a whole, are Solvent.

5.Conditions to Effectiveness.  The obligation of Agent and Lenders to enter into this Amendment shall be subject to the satisfaction of the following conditions precedent:

(a) that Agent shall have received a copy of this Amendment, duly executed by Borrowers, Agent and each Lender, in form and substance satisfactory to Agent;

(b)that Agent shall have received a copy of the corresponding amendment to the Affiliated Credit Agreement duly executed by the parties thereto, in form and substance satisfactory to Agent; and

(c)all fees payable to Agent or any Lender in connection with the execution of this Amendment shall have been paid.

6.Costs, Fees and Expenses.  In consideration of Agent’s and each Lender’s agreement to enter into this Amendment, Borrowers shall be responsible for the payment of all reasonable costs, fees and expenses of Agent’s counsel incurred in connection with the preparation of this Amendment and any related documents.  All such costs, fees and expenses shall be paid with proceeds of Revolving Loans.

7.Defenses and Setoffs.  Each Credit Party hereby represents and warrants that as of the date hereof, there are no defenses, setoffs, claims or counterclaims which could be asserted against the Agent or the Lenders arising from or in connection with the Credit Agreement or any other Financing Document.

8.Affirmation.  Except as specifically amended pursuant to the terms hereof, the Credit Agreement and all other Financing Documents (and all covenants, terms, conditions and agreements therein) shall remain in full force and effect, and are hereby ratified and confirmed in all respects by Borrowers.  Each Borrower covenants and agrees to comply with all of the terms, covenants and conditions of the Credit Agreement (as amended hereby) and the Financing Documents notwithstanding any prior course of conduct, waivers, releases or other actions or inactions on Agent’s or any Lender’s part which might otherwise constitute or be construed as a waiver of or agreement to such terms, covenants and conditions.

9.No Waiver or Novation.  The execution, delivery and effectiveness of this Amendment shall not operate as a waiver of any right, power or remedy of Agent or Lenders, nor constitute a waiver of any provision of the Credit Agreement, the other Financing Documents or any other documents, instruments and agreements executed or delivered in connection with any of the foregoing.  Nothing herein is intended or shall be construed as a waiver of any existing Defaults or Events of Default under the Credit Agreement or other Financing Documents or any of Agent’s or Lenders’ rights and remedies in respect of such Defaults or Events of Default.  This Amendment (together with any other document executed in connection herewith) is not intended to be, nor shall it be construed as, a novation of the Credit Agreement.

 


 

10.Incorporation of Credit Agreement Provisions.  The provisions contained in Section 12.8 (Governing Law; Submission to Jurisdiction) and 12.9 (Waiver of Jury Trial) of the Credit Agreement are incorporated herein by reference to the same extent as if reproduced herein in their entirety.

11.Headings.  Section headings in this Amendment are included for convenience of reference only and shall not constitute a part of this Amendment for any other purpose.

12.Counterparts.  This Amendment may be executed in counterparts, and such counterparts taken together shall be deemed to constitute one and the same instrument.  Signatures by facsimile or by electronic mail delivery of an electronic version of any executed signature page shall bind the parties hereto.

13.Reference to the Effect on the Financing Documents.  Upon the effectiveness of this Amendment, each reference in any Financing Document to “this Amendment,” “hereunder,” “hereof,” “herein” or words of similar import shall mean and be a reference to such Financing Document as modified by this Amendment.

(SIGNATURES APPEAR ON FOLLOWING PAGES)

 

 

 


 

IN WITNESS WHEREOF, intending to be legally bound, the undersigned have executed this Amendment as of the day and year first hereinabove set forth.

 

BORROWER

REPRESENTATIVE:

ACCURAY INCORPORATED,

a Delaware corporation

 

 

 

 

By:

/s/ Shigeyuki Hamamatsu

 

 

Shigeyuki Hamamatsu

 

 

Chief Financial Officer

 

OTHER BORROWERS:

TOMOTHERAPY INCORPORATED,

a Wisconsin corporation

 

 

 

 

By:

/s/ Shigeyuki Hamamatsu

 

 

Shigeyuki Hamamatsu

 

 

Director

 

AGENT:

MIDCAP FUNDING IV TRUST,

a Delaware statutory trust

 

 

 

 

 

By: Apollo Capital Management, L.P.

 

 

Its: Investment Manager

 

 

 

 

 

 

By: Apollo Capital Management GP, LLC

 

 

 

Its:  General Partner

 

 

 

 

 

By:

/s/ Maurice Amesllem

 

 

 

Maurice Amsellem

 

 

 

Authorized Signatory

 

LENDER:

MIDCAP FUNDING IV TRUST,

a Delaware statutory trust

 

 

 

 

 

By: Apollo Capital Management, L.P.

 

 

Its: Investment Manager

 

 

 

 

 

 

By: Apollo Capital Management GP, LLC

 

 

 

Its:  General Partner

 

 

 

 

 

By:

/s/ Maurice Amesllem

 

 

 

Maurice Amsellem

 

 

 

Authorized Signatory

 

 

 

 

 

 

signature page to amendment no. 5 to

credit and security agreement

(revolver)

 


 

Schedule 9.2

 

Location of Collateral

 

Company

Chief Executive Office

Chief Place of Business

Books and Records

Accuray Incorporated

1310 Chesapeake Terrace

Sunnyvale, CA 94089

1310 Chesapeake Terrace

Sunnyvale, CA 94089

1310 Chesapeake Terrace

Sunnyvale, CA 94089

1209 Deming Way

Madison, WI 53717

TomoTherapy Incorporated

1310 Chesapeake Terrace

Sunnyvale, CA 94089

1310 Chesapeake Terrace

Sunnyvale, CA 94089

1310 Chesapeake Terrace

Sunnyvale, CA 94089

1209 Deming Way

Madison, WI 53717

 

 

 

 

signature page to amendment no. 5 to

credit and security agreement

(revolver)

 


 

Inventory by location

 

Street Address

Category

City

State or
Country

Zip Code

Nature of such
Location

Managed by

Name and address
of 3rd party

Inventory Balance as of
July 31, 2019

 

 

 

 

 

 

 

 

 

[*****]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

 

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

 

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

 

[*****]

[*****]

[*****]

[*****]

 

 

 

 

 

 

 

 

 

[*****]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

 

 

 

 

 

 

 

 

 

[*****]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

[*****]

 

 

 

 

 

 

 

Grand Total

[*****]

 

 

Schedule 9.2

 

[*****] = Certain information contained in this document, marked by brackets, has been excluded from this exhibit because it is both (i) not material and (ii) would be competitively harmful if publicly disclosed.


 

 

Inventory 7/31/19

 

Inventory

 

[*****]

 

[*****]

[*****]

 

[*****]

[*****]

 

[*****]

[*****]

 

[*****]

[*****]

 

[*****]

[*****]

 

[*****]

[*****]

 

[*****]

[*****]

 

[*****]

 

 

[*****]

 

 

 

Less: Ineligible Inventory

 

[*****]

 

[*****]

[*****]

 

[*****]

[*****]

 

[*****]

[*****]

 

[*****]

[*****]

 

[*****]

[*****]

 

[*****]

[*****]

 

[*****]

[*****]

 

[*****]

[*****]

 

[*****]

Total Ineligible Inventory

[*****]

 

 

 

Total Eligible Inventory

[*****]

[*****]

 

[*****]

[*****]

 

[*****]

[*****]

 

 

 

 

 

Total Inventory Availability (before Total Availability Limit)

[*****]

 

 

 

Maximum Inventory Availability

 

Total Inventory Availability

[*****]

 

 

Schedule 9.2

 

[*****] = Certain information contained in this document, marked by brackets, has been excluded from this exhibit because it is both (i) not material and (ii) would be competitively harmful if publicly disclosed.

 

Exhibit 31.1

 

Certification

 

I, Joshua H. Levine, certify that:

 

1.

I have reviewed this quarterly report on Form 10-Q of Accuray Incorporated, a Delaware corporation;

 

2.

Based on my knowledge, this report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this report;

 

3.

Based on my knowledge, the financial statements, and other financial information included in this report, fairly present in all material respects, the financial condition, results of operations and cash flows of the registrant as of, and for, the periods presented in this report;

 

4.

The registrant’s other certifying officer and I are responsible for establishing and maintaining disclosure controls and procedures (as defined in Exchange Act Rules 13a-15(e) and 15d-15(e)) and internal control over financial reporting (as defined in Exchange Act Rules 13a-15(f) and 15d-15(f)) for the registrant and have:

 

 

a)

designed such disclosure controls and procedures, or caused such disclosure controls and procedures to be designed under our supervision, to ensure that material information relating to the registrant, including its consolidated subsidiaries, is made known to us by others within those entities, particularly during the period in which this report is being prepared;

 

 

b)

designed such internal control over financial reporting, or caused such internal control over financial reporting to be designed under our supervision, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles;

 

 

c)

evaluated the effectiveness of the registrant’s disclosure controls and procedures and presented in this report our conclusions about the effectiveness of the disclosure controls and procedures, as of the end of the period covered by this report based on such evaluation; and

 

 

d)

disclosed in this report any change in the registrant’s internal control over financial reporting that occurred during the registrant’s most recent fiscal quarter (the registrant’s fourth fiscal quarter in the case of an annual report) that has materially affected, or is reasonably likely to materially affect, the registrant’s internal control over financial reporting; and

 

5.

The registrant’s other certifying officer and I have disclosed, based on our most recent evaluation of internal control over financial reporting, to the registrant’s auditors and the audit committee of the registrant’s board of directors (or persons performing the equivalent functions):

 

 

a)

all significant deficiencies and material weaknesses in the design or operation of internal control over financial reporting which are reasonably likely to adversely affect the registrant’s ability to record, process, summarize and report financial information; and

 

 

b)

any fraud, whether or not material, that involves management or other employees who have a significant role in the registrant’s internal control over financial reporting.

 

Date: November 6, 2019

 

 

 

 

 

 

 

/s/ Joshua H. Levine

 

 

Joshua H. Levine

 

 

President and Chief Executive Officer

 

 

(Principal Executive Officer)

 

 

 

Exhibit 31.2

 

Certification

 

I, Shig Hamamatsu, certify that:

 

1.

I have reviewed this quarterly report on Form 10-Q of Accuray Incorporated, a Delaware corporation;

 

2.

Based on my knowledge, this report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this report;

 

3.

Based on my knowledge, the financial statements, and other financial information included in this report, fairly present in all material respects, the financial condition, results of operations and cash flows of the registrant as of, and for, the periods presented in this report;

 

4.

The registrant’s other certifying officer and I are responsible for establishing and maintaining disclosure controls and procedures (as defined in Exchange Act Rules 13a-15(e) and 15d-15(e)) and internal control over financial reporting (as defined in Exchange Act Rules 13a-15(f) and 15d-15(f)) for the registrant and have:

 

 

a)

designed such disclosure controls and procedures, or caused such disclosure controls and procedures to be designed under our supervision, to ensure that material information relating to the registrant, including its consolidated subsidiaries, is made known to us by others within those entities, particularly during the period in which this report is being prepared;

 

 

b)

designed such internal control over financial reporting, or caused such internal control over financial reporting to be designed under our supervision, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles;

 

 

c)

evaluated the effectiveness of the registrant’s disclosure controls and procedures and presented in this report our conclusions about the effectiveness of the disclosure controls and procedures, as of the end of the period covered by this report based on such evaluation; and

 

 

d)

disclosed in this report any change in the registrant’s internal control over financial reporting that occurred during the registrant’s most recent fiscal quarter (the registrant’s fourth fiscal quarter in the case of an annual report) that has materially affected, or is reasonably likely to materially affect, the registrant’s internal control over financial reporting; and

 

5.

The registrant’s other certifying officer and I have disclosed, based on our most recent evaluation of internal control over financial reporting, to the registrant’s auditors and the audit committee of the registrant’s board of directors (or persons performing the equivalent functions):

 

 

a)

all significant deficiencies and material weaknesses in the design or operation of internal control over financial reporting which are reasonably likely to adversely affect the registrant’s ability to record, process, summarize and report financial information; and

 

 

b)

any fraud, whether or not material, that involves management or other employees who have a significant role in the registrant’s internal control over financial reporting.

 

Date: November 6, 2019

 

 

 

 

 

 

 

/s/ Shig Hamamatsu

 

 

Shig Hamamatsu

 

 

Chief Financial Officer

 

 

(Principal Financial Officer)

 

 

Exhibit 32.1

 

Certification of Chief Executive Officer and Chief Financial Officer

 

Pursuant to 18 U.S.C. § 1350, as created by Section 906 of the Sarbanes-Oxley Act of 2002, the undersigned officers of Accuray Incorporated, a Delaware corporation (the “Company”) hereby certify, to such officers’ knowledge, that:

 

(i)the accompanying Quarterly Report on Form 10-Q of the Company for the three months ended September 30, 2019 (the “Report”) fully complies with the requirements of Section 13(a) or Section 15(d), as applicable, of the Securities Exchange Act of 1934, as amended; and

 

(ii)the information contained in the Report fairly presents, in all material respects, the financial condition and results of operations of the Company.

 

Date: November 6, 2019

 

 

/s/ Joshua H. Levine

 

Joshua H. Levine

 

President and Chief Executive Officer

 

(Principal Executive Officer)

 

 

 

 

 

/s/ Shig Hamamatsu

 

Shig Hamamatsu

 

Chief Financial Officer

 

(Principal Financial Officer)