Item 1A. Risk Factors.

There are numerous and varied risks, known and unknown, that may prevent us from achieving our goals. You should carefully consider the risks described below and the other information included in this Annual Report on Form 10-K, including the consolidated financial statements and related notes. If any of the following risks, or any other risks not described below, actually occur, it is likely that our business, financial condition, and/or operating results could be materially adversely affected. The risks and uncertainties described below include forward-looking statements and our actual results may differ from those discussed in these forward-looking statements.

Risks Related to Our Business

We have a history of net losses and may experience future losses.

We have yet to establish any history of profitable operations. We reported a net loss of $15.6 million for the fiscal year ended December 31, 2015 and had a net loss of approximately $25 million during the fiscal year ended December 31, 2014. As of December 31, 2015, we had an accumulated deficit of $123 million. We expect to incur additional operating losses for the foreseeable future. There can be no assurance that we will be able to achieve sufficient revenues throughout the year or be profitable in the future.

The report of our independent registered public accounting firm contains an explanatory paragraph as to our ability to continue as a going concern, which could prevent us from obtaining new financing on reasonable terms or at all.

Because we have had recurring losses and negative cash flows from operating activities, substantial doubt exists regarding our ability to remain as a going concern at the same level at which we are currently performing. Accordingly, the report of Kesselman & Kesselman, our independent registered public accounting firm, with respect to our financial statements at December 31, 2015, includes an explanatory paragraph as to our potential inability to continue as a going concern. The doubts regarding our potential ability to continue as a going concern may adversely affect our ability to obtain new financing on reasonable terms or at all.

We will need to raise additional capital to meet our business requirements in the future and such capital raising may be costly or difficult to obtain and could dilute out stockholders’ ownership interests.

The net proceeds from the offering of our shares of common stock that closed on March 21, 2016, will only be sufficient to enable us to continue operations for a short period of time. In order to fully realize all of our business objectives, absent any non-dilutive funding from a strategic partner or some other strategic transactions, we will need to raise additional capital no later than May 2016, which additional capital may not be available on reasonable terms or at all. For instance, we will need to raise additional funds to accomplish the following:

Any additional capital raised through the sale of equity or equity backed securities may dilute our stockholders’ ownership percentages and could also result in a decrease in the market value of our equity securities.

The terms of any securities issued by us in future capital transactions may be more favorable to new investors, and may include preferences, superior voting rights and the issuance of warrants or other derivative securities, which may have a further dilutive effect on the holders of any of our securities then outstanding.

Furthermore, any additional debt or equity financing that we may need may not be available on terms favorable to us, or at all. If we are unable to obtain such additional financing on a timely basis, we may have to curtail our development activities and growth plans and/or be forced to sell assets, perhaps on unfavorable terms, which would have a material adverse effect on our business, financial condition and results of operations, and ultimately could be forced to discontinue our operations and liquidate, in which event it is unlikely that stockholders would receive any distribution on their shares. Further, we may not be able to continue operating if we do not generate sufficient revenues from operations needed to stay in business.

In addition, we may incur substantial costs in pursuing future capital financing, including investment banking fees, legal fees, accounting fees, securities law compliance fees, printing and distribution expenses and other costs. We may also be required to recognize non-cash expenses in connection with certain securities we issue, such as convertible notes and warrants, which may adversely impact our financial condition.

The voluntary field action of our MGuard Prime EPS we initiated in 2014 could continue to have a significant adverse impact on us.

The manufacturing and marketing of medical devices involves an inherent risk that our products may prove to be defective and cause a health risk even after regulatory clearances have been obtained. Medical devices may also be modified after regulatory clearance is obtained to such an extent that additional regulatory clearance is necessary before the device can be further marketed. In these events, we may voluntarily implement a recall or market withdrawal or may be required to do so by a regulatory authority.

On April 30, 2014 we initiated a voluntary field corrective action of our MGuard Prime EPS to address the issue of stent retention following reports of MGuard Prime EPS stent dislodgements in patients. Although there have been no reports of death or serious injury as a result of such dislodgements, we decided to suspend shipments of the MGuard Prime EPS and implement a field corrective action to enhance the reliability and performance of the affected product units in the field. We received European regulatory approval to resume manufacturing and distribution of our MGuard Prime EPS stent with a modified stent securement process, and we began shipping products to new customers in our direct markets in Western Europe in late September 2014. We completed the full re-launch of MGuard Prime EPS in 2015, with the exception of Russia.

As a result of our voluntary field action, we are subject to numerous risks and uncertainties, including the following:

In the European Economic Area, we must comply with the EU Medical Device Vigilance System. Under this system, manufacturers are required to take Field Safety Corrective Actions (“FSCAs”) to reduce a risk of death or serious deterioration in the state of health associated with the use of a medical device that is already placed on the market. A FSCA may include the recall, modification, exchange, destruction or retrofitting of the device. FSCAs must be communicated by the manufacturer or its legal representative to its customers and/or to the end users of the device through Field Safety Notices.

Any adverse event involving our products could result in other future voluntary corrective actions, such as recalls or customer notifications, or agency action, such as inspection or enforcement action. Adverse events, such as the MGuard Prime EPS stent dislodgements, have been reported to us in the past, and we cannot guarantee that they will not occur in the future. Any corrective action, whether voluntary or involuntary, as well as defending ourselves in a lawsuit, would require the dedication of our time and capital, distract management from operating our business and could harm our reputation and financial results.

In addition to the foregoing, since we initiated our voluntary field action we have received a demand from one distributor that we refund approximately $160,000 in lieu of receiving refitted product and a demand from a second distributor to provide unspecified compensation for pre-paid goods subject to the voluntary field action, related costs and any third claims. We do not believe that these distributors are entitled to any compensation or refunds due to the voluntary field action and we intend to defend ourselves against any such claims, however, regarding the demand from the second distributor, we believe that a loss from any related future proceedings that could range from a minimal amount up to 1,075,000 Euros is reasonably possible. While we are disputing these claims, should an action be filed we could be forced to pay damages which could result in a material adverse effect on our business.

We expect to derive our revenue from sales of our MGuard Prime EPS and CGuard EPS stent products and other products we may develop, such as NVGuard. If we fail to generate revenue from these sources, our results of operations and the value of our business would be materially and adversely affected.

We expect our revenue to be generated from sales of our MGuard Prime EPS and CGuard EPS stent products and other products we may develop. Future sales of CGuard EPS will be subject to the receipt of regulatory approvals and commercial and market uncertainties that may be outside our control. In addition, sales of MGuard Prime EPS have been hampered by weakened demand for bare metal stents, which may never improve, and we may not be successful in developing a drug-eluting stent product. In addition, there may be insufficient demand for other products we are seeking to develop, such as NVGuard. If we fail to generate expected revenues from these products, our results of operations and the value of our business and securities would be materially and adversely affected.

If we are unable to obtain and maintain intellectual property protection covering our products, others may be able to make, use or sell our products, which would adversely affect our revenue.

Our ability to protect our products from unauthorized or infringing use by third parties depends substantially on our ability to obtain and maintain valid and enforceable patents. Similarly, the ability to protect our trademark rights might be important to prevent third party counterfeiters from selling poor quality goods using our designated trademarks/trade names. Due to evolving legal standards relating to the patentability, validity and enforceability of patents covering medical devices and pharmaceutical inventions and the scope of claims made under these patents, our ability to enforce patents is uncertain and involves complex legal and factual questions. Accordingly, rights under any of our pending patent applications and patents may not provide us with commercially meaningful protection for our products or may not afford a commercial advantage against our competitors or their competitive products or processes. In addition, patents may not be issued from any pending or future patent applications owned by or licensed to us, and moreover, patents that may be issued to us now or in the future may not be valid or enforceable. Further, even if valid and enforceable, our patents may not be sufficiently broad to prevent others from marketing products like ours, despite our patent rights. 

The validity of our patent claims depends, in part, on whether prior art references exist that describe or render obvious our inventions as of the filing date of our patent applications. We may not have identified all prior art, such as U.S. and foreign patents or published applications or published scientific literature, that could adversely affect the patentability of our pending patent applications. For example, some material references may be in a foreign language and may not be uncovered during examination of our patent applications. Additionally, patent applications in the United States are maintained in confidence for up to 18 months after their filing. In some cases, however, patent applications remain confidential in the U.S. Patent and Trademark Office for the entire time prior to issuance as a U.S. patent. Patent applications filed in countries outside the U.S. are not typically published until at least 18 months from their first filing date. Similarly, publication of discoveries in the scientific or patent literature often lags behind actual discoveries. Therefore, we cannot be certain that we were the first to invent, or the first to file patent applications relating to, our stent technologies. In the event that a third party has also filed a U.S. patent application covering our stents or a similar invention, we may have to participate in an adversarial proceeding, known as an interference, declared by the U.S. Patent and Trademark Office to determine priority of invention in the United States It is possible that we may be unsuccessful in the interference, resulting in a loss of some portion or all of our position in the United States.

In addition, statutory differences in patentable subject matter depending on the jurisdiction may limit the protection we obtain on certain of the technologies we develop. The laws of some foreign jurisdictions do not offer the same protection to, or may make it more difficult to effect the enforcement of, proprietary rights as in the United States, risk that may be exacerbated if we move our manufacturing to certain countries in Asia. If we encounter such difficulties or are otherwise precluded from effectively protecting our intellectual property rights in any foreign jurisdictions, our business prospects could be substantially harmed.

We may initiate litigation to enforce our patent rights on any patents issued on pending patent applications, which may prompt adversaries in such litigation to challenge the validity, scope, ownership, or enforceability of our patents. Third parties can sometimes bring challenges against a patent holder to resolve these issues, as well. If a court decides that any such patents are not valid, not enforceable, not wholly owned by us, or are of a limited scope, we may not have the right to stop others from using our inventions. Also, even if our patent rights are determined by a court to be valid and enforceable, they may not be sufficiently broad to prevent others from marketing products similar to ours or designing around our patents, despite our patent rights, nor do they provide us with freedom to operate unimpeded by the patent and other intellectual property rights of others that may cover our products. We may be forced into litigation to uphold the validity of the claims in our patent portfolio, as well as our ownership rights to such intellectual property, and litigation is often an uncertain and costly process.

We also rely on trade secret protection to protect our interests in proprietary know-how and for processes for which patents are difficult to obtain or enforce. We may not be able to protect our trade secrets adequately. In addition, we rely on non-disclosure and confidentiality agreements with employees, consultants and other parties to protect, in part, trade secrets and other proprietary technology. These agreements may be breached and we may not have adequate remedies for any breach. Moreover, others may independently develop equivalent proprietary information, and third parties may otherwise gain access to our trade secrets and proprietary knowledge. Any disclosure of confidential data into the public domain or to third parties could allow competitors to learn our trade secrets and use the information in competition against us.

If our manufacturing facilities are unable to provide an adequate supply of products, our growth could be limited and our business could be harmed.

We currently manufacture our MGuard Prime EPS and CGuard EPS products at our facility in Tel Aviv, Israel. If there were a disruption to our existing manufacturing facility, we would have no other means of manufacturing our MGuard Prime EPS or CGuard EPS stents until we were able to restore the manufacturing capability at our facility or develop alternative manufacturing facilities. If we were unable to produce sufficient quantities of our MGuard Prime EPS or CGuard EPS stents to meet market demand or for use in our current and planned clinical trials, or if our manufacturing process yields substandard stents, our development and commercialization efforts would be delayed.

Additionally, any damage to or destruction of our Tel Aviv facility or its equipment, prolonged power outage or contamination at our facility would significantly impair our ability to produce either MGuard Prime EPS or Cguard EPS stents.

Finally, the production of our stents must occur in a highly controlled, clean environment to minimize particles and other yield and quality-limiting contaminants. In spite of stringent quality controls, weaknesses in process control or minute impurities in materials may cause a substantial percentage of defective products in a lot. If we are unable to maintain stringent quality controls, or if contamination problems arise, our clinical development and commercialization efforts could be delayed, which would harm our business and results of operations. 

Pre-clinical and clinical trials will be lengthy and expensive, and any delay or failure of clinical trials could prevent us from commercializing our MicroNet products, which would materially and adversely affect our results of operations and the value of our business.

As part of the regulatory process, we must conduct clinical trials for each product candidate to demonstrate safety and efficacy to the satisfaction of the regulatory authorities, including, if we seek in the future to sell our products in the United States, the U.S. Food and Drug Administration. Clinical trials are subject to rigorous regulatory requirements and are expensive and time-consuming to design and implement. They require the enrollment of a large number of patients, and suitable patients may be difficult to identify and recruit, which may cause a delay in the development and commercialization of our product candidates. In some trials, a greater number of patients and a longer follow-up period may be required. Patient enrollment in clinical trials and the ability to successfully complete patient follow-up depends on many factors, including the size of the patient population, the nature of the trial protocol, the proximity of patients to clinical sites, the eligibility criteria for the clinical trial and patient compliance. For example, patients may be discouraged from enrolling in our clinical trials if the trial protocol requires them to undergo extensive post-treatment procedures or follow-up to assess the safety and efficacy of our products, or they may be persuaded to participate in contemporaneous clinical trials of competitive products. In addition, patients participating in our clinical trials may die before completion of the trial or suffer adverse medical events unrelated to or related to our products. Delays in patient enrollment or failure of patients to continue to participate in a clinical trial may cause an increase in costs and delays or result in the failure of the clinical trial.

In addition, the length of time required to complete clinical trials for pharmaceutical and medical device products varies substantially according to the degree of regulation and the type, complexity, novelty and intended use of a product, and can continue for several years and cost millions of dollars. The commencement and completion of clinical trials for our existing products and those under development may be delayed by many factors, including governmental or regulatory delays and changes in regulatory requirements, policy and guidelines or our inability or the inability of any potential licensee to manufacture or obtain from third parties materials sufficient for use in preclinical studies and clinical trials. In addition, market demand may change for products being tested due to the length of time needed to complete requisite clinical trials. For example, we decided to discontinue our MASTER II trial notwithstanding the resources we had spent on the trial due to the change in market demand for bare metal stents.

Physicians may not widely adopt our products unless they determine, based on experience, long-term clinical data and published peer reviewed journal articles, that the use of our stents provides a safe and effective alternative to other existing treatments for coronary artery disease and carotid artery disease.

We believe that physicians will not widely adopt our products unless they determine, based on experience, long-term clinical data and published peer reviewed journal articles, that the use of our products provide a safe and effective alternative to other existing treatments for the conditions we are seeking to address.

If we fail to demonstrate safety and efficacy that is at least comparable to existing and future therapies available on the market, our ability to successfully market our products will be significantly limited. Even if the data collected from clinical studies or clinical experience indicate positive results, each physician’s actual experience with our products will vary. Clinical trials conducted with our products may involve procedures performed by physicians who are technically proficient and are high-volume stent users of such products. Consequently, both short-term and long-term results reported in these clinical trials may be significantly more favorable than typical results of practicing physicians, which could negatively affect rates of adoptions of our products. We also believe that published peer-reviewed journal articles and recommendations and support by influential physicians regarding our products will be important for market acceptance and adoption, and we cannot assure you that we will receive these recommendations and support, or that supportive articles will be published.

Physicians currently consider drug-eluting stents to be the industry standard for treatment of coronary artery disease. None of our current coronary products is a drug-eluting stent, and this may adversely affect our business.

Our ability to attract customers depends to a large extent on our ability to provide goods that meet the customers’ and the market’s demands and expectations. If we do not have a product that is expected by the market, we may lose customers. The market demand has shifted away from bare metal stents in favor of drug-eluting stents. Our MGuard Prime EPS is a bare-metal stent product, and we have noticed a reduction in the sales level of MGuard Prime EPS compared to the sales level we had in the past. Such sales may never recover and we do not currently have the resources to develop a drug-eluting stent product. Our failure to provide industry standard devices could adversely affect our business, financial condition and results of operations.

Our products are based on a new technology, and we have only limited experience in regulatory affairs, which may affect our ability or the time required to navigate complex regulatory requirements and obtain necessary regulatory approvals, if such approvals are received at all. Regulatory delays or denials may increase our costs, cause us to lose revenue and materially and adversely affect our results of operations and the value of our business.

Because our products are new and long-term success measures have not been completely validated, regulatory agencies may take a significant amount of time in evaluating product approval applications. Treatments may exhibit a favorable measure using one metric and an unfavorable measure using another metric. Any change in accepted metrics may result in reconfiguration of, and delays in, our clinical trials. Additionally, we have only limited experience in filing and prosecuting the applications necessary to gain regulatory approvals, and our clinical, regulatory and quality assurance personnel are currently composed of only five employees. As a result, we may experience delays in connection with obtaining regulatory approvals for our products.

In addition, the products we and any potential licensees license, develop, manufacture and market are subject to complex regulatory requirements, particularly in the United States, Europe and Asia, which can be costly and time-consuming. There can be no assurance that such approvals will be granted on a timely basis, if at all. Furthermore, there can be no assurance of continued compliance with all regulatory requirements necessary for the manufacture, marketing and sale of the products we will offer in each market where such products are expected to be sold, or that products we have commercialized will continue to comply with applicable regulatory requirements. If a government regulatory agency were to conclude that we were not in compliance with applicable laws or regulations, the agency could institute proceedings to detain or seize our products, issue a recall, impose operating restrictions, enjoin future violations and assess civil and criminal penalties against us, our officers or employees and could recommend criminal prosecution. Furthermore, regulators may proceed to ban, or request the recall, repair, replacement or refund of the cost of, any device manufactured or sold by us. Furthermore, there can be no assurance that all necessary regulatory approvals will be obtained for the manufacture, marketing and sale in any market of any new product developed or that any potential licensee will develop using our licensed technology.

Even if our products are approved by regulatory authorities, if we or our suppliers fail to comply with ongoing regulatory requirements, or if we experience unanticipated problems with our products, these products could be subject to restrictions or withdrawal from the market.

Any regulatory approvals that we receive for our products will require surveillance to monitor the safety and efficacy of the product and may require us to conduct post-approval clinical studies. In addition, if a regulatory authority approves our products, the manufacturing processes, labeling, packaging, distribution, adverse event reporting, storage, advertising, promotion, import, export and recordkeeping for our products will be subject to extensive and ongoing regulatory requirements.

Moreover, if we obtain regulatory approval for any of our products, we will only be permitted to market our products for the indication approved by the regulatory authority, and such approval may involve limitations on the indicated uses or promotional claims we may make for our products. In addition, later discovery of previously unknown problems with our products, including adverse events of unanticipated severity or frequency, or with our suppliers or manufacturing processes, or failure to comply with regulatory requirements, may result in, among other things:

The applicable regulatory authorities' policies may change and additional government regulations may be enacted that could prevent, limit or delay regulatory approval of our products. We cannot predict the likelihood, nature or extent of government regulation that may arise from future legislation or administrative action, either in the United States or abroad. If we are slow or unable to adapt to changes in existing requirements or the adoption of new requirements or policies, or if we are not able to maintain regulatory compliance, we may lose any marketing approval that we may have obtained and we may not achieve or sustain profitability.

Further, healthcare laws and regulations may change significantly in the future. Any new healthcare laws or regulations may adversely affect our business. A review of our business by courts or regulatory authorities may result in a determination that could adversely affect our operations. In addition, the healthcare regulatory environment may change in a way that restricts our operations.

We are subject to federal, state and foreign healthcare laws and regulations and implementation of or changes to such healthcare laws and regulations could adversely affect our business and results of operations.

We are subject to federal, state and foreign healthcare laws and regulations and implementation of or changes to such healthcare laws and regulations could adversely affect our business and results of operations.

In both the United States and certain foreign jurisdictions, there have been a number of legislative and regulatory proposals in recent years to change the healthcare system in ways that could impact our ability to sell our products. If we are found to be in violation of any of these laws or any other federal or state regulations, we may be subject to administrative, civil and/or criminal penalties, damages, fines, individual imprisonment, exclusion from federal health care programs and the restructuring of our operations. Any of these could have a material adverse effect on our business and financial results. Since many of these laws have not been fully interpreted by the courts, there is an increased risk that we may be found in violation of one or more of their provisions. Any action against us for violation of these laws, even if we ultimately are successful in our defense, will cause us to incur significant legal expenses and divert our management’s attention away from the operation of our business.

Failure to obtain regulatory approval in foreign jurisdictions will prevent us from marketing our products in such jurisdictions.

We market our products in international markets. In order to market our products in other foreign jurisdictions, we must obtain separate regulatory approvals from those obtained in the United States and Europe. The approval procedure varies among countries and can involve additional testing, and the time required to obtain approval may differ from that required to obtain CE mark or U.S. Food and Drug Administration approval. Foreign regulatory approval processes may include all of the risks associated with obtaining CE mark or U.S. Food and Drug Administration approval in addition to other risks. We may not obtain foreign regulatory approvals on a timely basis, if at all. CE mark approval does not ensure approval by regulatory authorities in other countries. We may not be able to file for regulatory approvals and may not receive necessary approvals to commercialize our products in certain markets.

We operate in an intensely competitive and rapidly changing business environment, and there is a substantial risk our products could become obsolete or uncompetitive.

The medical device market is highly competitive. We compete with many medical device companies in the United States and globally in connection with our current products and products under development. We face competition from numerous pharmaceutical and biotechnology companies in the therapeutics area, as well as competition from academic institutions, government agencies and research institutions. When we commercialize our products, we expect to face intense competition from Boston Scientific Corporation, Guidant Corporation, Medtronic, Inc., Abbott Vascular Devices, Johnson & Johnson, Terumo Corporation, Covidien Ltd., Cordis Corporation and others. Most of our current and potential competitors, including but not limited to those listed above, have, and will continue to have, substantially greater financial, technological, research and development, regulatory and clinical, manufacturing, marketing and sales, distribution and personnel resources than we do. There can be no assurance that we will have sufficient resources to successfully commercialize our products, if and when they are approved for sale. The worldwide market for stent products is characterized by intensive development efforts and rapidly advancing technology. Our future success will depend largely upon our ability to anticipate and keep pace with those developments and advances. Current or future competitors could develop alternative technologies, products or materials that are more effective, easier to use or more economical than what we or any potential licensee develop. If our technologies or products become obsolete or uncompetitive, our related product sales and licensing revenue would decrease. This would have a material adverse effect on our business, financial condition and results of operations.

We may become subject to claims by much larger and better capitalized competitors seeking to invalidate our intellectual property or our rights thereto.

Based on the prolific litigation that has occurred in the stent industry and the fact that we may pose a competitive threat to some large and well-capitalized companies that own or control patents relating to stents and their use, manufacture and delivery, we believe that it is possible that one or more third parties will assert a patent infringement claim against the manufacture, use or sale of our stents based on one or more of these patents. These companies also own patents relating to the use of drugs to treat restenosis, stent architecture, catheters to deliver stents, and stent manufacturing and coating processes and compositions, as well as general delivery mechanism patents like rapid exchange that might be alleged to cover one or more of our products. A number of stent-related patents are owned by very large and well-capitalized companies that are active participants in the stent market. For example, we are aware of one public company that is pursuing patent protection directed to layered materials disposed over a particular stent configuration. In addition, it is possible that a lawsuit asserting patent infringement, misappropriation of intellectual property, or related claims may have already been filed against us of which we are not aware. As the number of competitors in the stent market grows, the possibility of patent infringement by us, and/or a patent infringement or misappropriation claim against us, increases.

These companies have maintained their position in the market by, among other things, establishing intellectual property rights relating to their products and enforcing these rights aggressively against their competitors and new entrants into the market. All of the major companies in the stent and related markets, including Boston Scientific Corporation and Medtronic, Inc., have been repeatedly involved in patent litigation relating to stents since at least 1997. The stent and related markets have experienced rapid technological change and obsolescence in the past, and our competitors have strong incentives to stop or delay the introduction of new products and technologies. We may pose a competitive threat to many of the companies in the stent and related markets. Accordingly, many of these companies will have a strong incentive to take steps, through patent litigation or otherwise, to prevent us from commercializing our products. Such litigation or claims would divert attention and resources away from the development and/or commercialization of our product and product development, and could result in an adverse court judgment that would make it impossible or impractical to sell our products in one or more territories.

If we fail to maintain or establish satisfactory agreements with suppliers or if we experience an interruption of the supply of materials from suppliers, we may not be able to obtain materials that are necessary to develop our products.

We depend on outside suppliers for certain raw materials. These raw materials or components may not always be available at our standards or on acceptable terms, if at all, and we may be unable to locate alternative suppliers or produce necessary materials or components on our own.

Some of the components of our products are currently provided by only one vendor, or a single-source supplier. For MGuard Prime EPS and CGuard EPS, we depend on MeKo Laserstrahl-Materialbearbeitung for the laser cutting of the stent, Natec Medical Ltd. for the supply of catheters, and Biogeneral Inc. for the fiber. We may have difficulty obtaining similar components from other suppliers that are acceptable to the U.S. Food and Drug Administration or foreign regulatory authorities if it becomes necessary.

If we have to switch to a replacement supplier, we will face additional regulatory delays and the interruption of the manufacture and delivery of our stents for an extended period of time, which would delay completion of our clinical trials or commercialization of our products. In addition, we will be required to obtain prior regulatory approval from the U.S. Food and Drug Administration or foreign regulatory authorities to use different suppliers or components that may not be as safe or as effective. As a result, regulatory approval of our products may not be received on a timely basis or at all.

We may be exposed to product liability claims and insurance may not be sufficient to cover these claims.

We may be exposed to product liability claims based on the use of any of our products, or products incorporating our licensed technology, in clinical trials. We may also be exposed to product liability claims based on the sale of any such products following the receipt of regulatory approval. Product liability claims could be asserted directly by consumers, health-care providers or others. We have obtained product liability insurance coverage; however such insurance may not provide full coverage for our future clinical trials, products to be sold, and other aspects of our business. Insurance coverage is becoming increasingly expensive and we may not be able to maintain current coverage, or expand our insurance coverage to include future clinical trials or the sale of products incorporating our licensed technology if marketing approval is obtained for such products, at a reasonable cost or in sufficient amounts to protect against losses due to product liability or at all. A successful product liability claim or series of claims brought against us could result in judgments, fines, damages and liabilities that could have a material adverse effect on our business, financial condition and results of operations. We may incur significant expense investigating and defending these claims, even if they do not result in liability. Moreover, even if no judgments, fines, damages or liabilities are imposed on us, our reputation could suffer, which could have a material adverse effect on our business, financial condition and results of operations.

We may face risks associated with future litigation and claims.

We may, in the future, be involved in one or more lawsuits, claims or other proceedings. These suits could concern issues including contract disputes, employment actions, employee benefits, taxes, environmental, health and safety, personal injury and product liability matters. In November 2015, we received written communication from a service provider to remit payment amounting to $1,965,000. Given the preliminary stage, our management and legal counsel cannot estimate the outcome of any legal proceedings or settlements related to this communication, however we believe that neither a court loss nor settlement are probable. Due to the uncertainties of litigation, however, we can give no assurance that we will prevail on any claims made against us in any such lawsuit. Also, we can give no assurance that any other lawsuits or claims brought in the future will not have an adverse effect on our financial condition, liquidity or operating results.

The successful management of operations depends on our ability to attract and retain talented personnel.

We depend on the expertise of our senior management and research personnel, which would be difficult to replace. The loss of the services of any of our senior management could compromise our ability to achieve our objectives. Furthermore, recruiting and retaining qualified personnel will be crucial to future success. There can be no assurance that we will be able to attract and retain necessary personnel on acceptable terms given the competition among medical device, biotechnology, pharmaceutical and healthcare companies, universities and non-profit research institutions for experienced management, scientists, researchers, sales and marketing and manufacturing personnel. If we are unable to attract, retain and motivate our key personnel, our operations may be jeopardized and our results of operations may be materially and adversely affected.

We are an international business, and we are exposed to various global and local risks that could have a material adverse effect on our financial condition and results of operations.

We operate globally and develop and manufacture products in multiple countries. Consequently, we face complex legal and regulatory requirements in multiple jurisdictions, which may expose us to certain financial and other risks. International sales and operations are subject to a variety of risks, including:

Further, in the past, the State of Israel and Israeli companies have been subjected to an economic boycott. Several countries still restrict business and trade activity with the State of Israel and with Israeli companies. These restrictive laws and policies may have an adverse impact on our operating results, financial condition or the expansion of our business.

International markets are also affected by economic pressure to contain reimbursement levels and healthcare costs. Profitability from international operations may be limited by risks and uncertainties related to regional economic conditions, regulatory and reimbursement approvals, competing products, infrastructure development, intellectual property rights protection and our ability to implement our overall business strategy. We expect these risks will increase as we pursue our strategy to expand operations into new geographic markets. We may not succeed in developing and implementing effective policies and strategies in each location where we conduct business. Any failure to do so may harm our business, results of operations and financial condition.

If we fail to obtain an adequate level of reimbursement for our products by third party payors, there may be no commercially viable markets for our product candidates or the markets may be much smaller than expected.

The availability and levels of reimbursement by governmental and other third party payors affect the market for our product candidates. The efficacy, safety, performance and cost-effectiveness of our product candidates and of any competing products will determine the availability and level of reimbursement. Reimbursement and healthcare payment systems in international markets vary significantly by country, and include both government sponsored healthcare and private insurance. To obtain reimbursement or pricing approval in some countries, we may be required to produce clinical data, which may involve one or more clinical trials, that compares the cost-effectiveness of our products to other available therapies. We may not obtain international reimbursement or pricing approvals in a timely manner, if at all. Our failure to receive international reimbursement or pricing approvals would negatively impact market acceptance of our products in the international markets in which those approvals are sought.

We believe that future reimbursement may be subject to increased restrictions both in the U.S. and in international markets. There is increasing pressure by governments worldwide to contain health care costs by limiting both the coverage and the level of reimbursement for therapeutic products and by refusing, in some cases, to provide any coverage for products that have not been approved by the relevant regulatory agency. Future legislation, regulation or reimbursement policies of third party payors may adversely affect the demand for our products currently under development and limit our ability to sell our product candidates on a profitable basis. In addition, third party payors continually attempt to contain or reduce the costs of healthcare by challenging the prices charged for healthcare products and services. If reimbursement for our products is unavailable or limited in scope or amount or if pricing is set at unsatisfactory levels, market acceptance of our products would be impaired and future revenues, if any, would be adversely affected.

In the United States and in the European Union, our business could be significantly and adversely affected by healthcare reform legislation and other administration and legislative proposals.

The Patient Protection and Affordable Care Act and the Health Care and Education Reconciliation Act were enacted into law in the United States in March 2010. Certain provisions of these acts are not yet fully implemented, it may be a number of years before certain provisions are fully implemented, there remain to be programs and requirements for which the details have not yet been fully established or consequences not fully understood, and it is unclear what the full impacts will be from the legislation. The legislation levies a 2.3% excise tax, that began on January 1, 2013, on all sales of any U.S. medical device listed with the U.S. Food and Drug Administration under Section 510(j) of the Federal Food, Drug, and Cosmetic Act and 21 C.F.R. Part 807, unless the device falls within an exemption from the tax, such as the exemption governing direct retail sale of devices to consumers or for foreign sales of these devices. If we commence sales of our MGuard Prime EPS or CGuard EPS stent in the United States, this new tax may materially and adversely affect our business and results of operations. The legislation also focuses on a number of Medicare provisions aimed at improving quality and decreasing costs. Uncertainties remain regarding what negative unintended consequences these provisions will have on patient access to new technologies. The Medicare provisions include value-based payment programs, increased funding of comparative effectiveness research, reduced hospital payments for avoidable readmissions and hospital acquired conditions, and pilot programs to evaluate alternative payment methodologies that promote care coordination (such as bundled physician and hospital payments). Additionally, the provisions include a reduction in the annual rate of inflation for hospitals which started in 2011 and the establishment of an independent payment advisory board to recommend ways of reducing the rate of growth in Medicare spending. We cannot predict what healthcare programs and regulations will be implemented or changed at the federal or state level in the United States, or the effect of any future legislation or regulation. However, any changes that lower reimbursements for our products or reduce medical procedure volumes could adversely affect our business plan to introduce our products in the United States

On September 26, 2012, the European Commission adopted a package of legislative proposals designed to replace the existing regulatory framework governing medical devices in the European Union. These proposals are currently being reviewed by the European Parliament and the Council and may undergo significant amendments as part of the legislative process. If adopted by the European Parliament and the Council in their present form, these proposed revisions would, among other things, impose stricter requirements on medical device manufacturers and strengthen the supervising competences of the competent authorities of European Union Member States and the notified bodies. As a result, if and when adopted, the proposed new legislation could prevent or delay the CE marking of our products under development or impact our ability to modify our currently CE marked products on a timely basis. The regulation of advanced therapy medicinal products is also in continued development in the European Union, with the European Medicines Agency publishing new clinical or safety guidelines concerning advanced therapy medicinal products on a regular basis. Any of these regulatory changes and events could limit our ability to form collaborations and our ability to continue to commercialize our products, and if we fail to comply with any such new or modified regulations and requirements it could adversely affect our business, operating results and prospects.

Risks Related to Operating in Israel

We anticipate being subject to fluctuations in currency exchange rates because we expect a substantial portion of our revenues will be generated in Euros and U.S. dollars, while a significant portion of our expenses will be incurred in New Israeli Shekels.

We expect a substantial portion of our revenues will be generated in U.S. dollars and Euros, while a significant portion of our expenses, principally salaries and related personnel expenses, is paid in New Israeli Shekels, or NIS. As a result, we are exposed to the risk that the rate of inflation in Israel will exceed the rate of devaluation of the NIS in relation to the Euro or the U.S. dollar, or that the timing of this devaluation will lag behind inflation in Israel. Because inflation has the effect of increasing the dollar and Euro costs of our operations, it would therefore have an adverse effect on our dollar-measured results of operations. The value of the NIS, against the Euro, the U.S. dollar, and other currencies may fluctuate and is affected by, among other things, changes in Israel’s political and economic conditions. Any significant revaluation of the NIS may materially and adversely affect our cash flows, revenues and financial condition. Fluctuations in the NIS exchange rate, or even the appearance of instability in such exchange rate, could adversely affect our ability to operate our business.

If there are significant shifts in the political, economic and military conditions in Israel and its neighbors, it could have a material adverse effect on our business relationships and profitability.

Our sole manufacturing facility and certain of our key personnel are located in Israel. Our business is directly affected by the political, economic and military conditions in Israel and its neighbors. Since the establishment of the State of Israel in 1948, a number of armed conflicts have occurred between Israel and its Arab neighbors. A state of hostility, varying in degree and intensity, has caused security and economic problems in Israel. Although Israel has entered into peace treaties with Egypt and Jordan, and various agreements with the Palestinian Authority, there has been a marked increase in violence, civil unrest and hostility, including armed clashes, between the State of Israel and the Palestinians since September 2000. The establishment in 2006 of a government in the Gaza Strip by representatives of the Hamas militant group has created heightened unrest and uncertainty in the region. In mid-2006, Israel engaged in an armed conflict with Hezbollah, a Shiite Islamist militia group based in Lebanon, and in June 2007, there was an escalation in violence in the Gaza Strip. From December 2008 through January 2009 and again in November and December 2012, Israel engaged in an armed conflict with Hamas, which involved missile strikes against civilian targets in various parts of Israel and negatively affected business conditions in Israel. In July 2014, Israel launched an additional operation against Hamas operatives in the Gaza strip in response to Palestinian groups launching rockets at Israel. Recent political uprisings and social unrest in Syria are affecting its political stability, which has led to the deterioration of the political relationship between Syria and Israel and have raised new concerns regarding security in the region and the potential for armed conflict. Similar civil unrest and political turbulence is currently ongoing in many countries in the region. The continued political instability and hostilities between Israel and its neighbors and any future armed conflict, terrorist activity or political instability in the region could adversely affect our operations in Israel and adversely affect the market price of our shares of common stock. In addition, several countries restrict doing business with Israel and Israeli companies have been and are today subjected to economic boycotts. The interruption or curtailment of trade between Israel and its present trading partners could adversely affect our business, financial condition and results of operations.

In addition, some of our officers or key employees may be called to active duty at any time under emergency circumstances for extended periods of time. See “—Our operations could be disrupted as a result of the obligation of certain of our personnel residing in Israel to perform military service.”

Our operations could be disrupted as a result of the obligation of certain of our personnel residing in Israel to perform military service.

Some of our officers and employees reside in Israel and may be required to perform annual military reserve duty. Currently, all male adult citizens and permanent residents of Israel under the age of 40 (or older, depending on their position with the Israeli Defense Forces reserves), unless exempt, are obligated to perform military reserve duty annually and are subject to being called to active duty at any time under emergency circumstances. Our operations could be disrupted by the absence for a significant period of one or more of our key officers and employees due to military service. Any such disruption could have a material adverse effect on our business, results of operations and financial condition.

We may not be able to enforce covenants not-to-compete under current Israeli law.

We have non-competition agreements with most of our employees, many of which are governed by Israeli law. These agreements generally prohibit our employees from competing with us or working for our competitors for a specified period following termination of their employment. However, Israeli courts are reluctant to enforce non-compete undertakings of former employees and tend, if at all, to enforce those provisions for relatively brief periods of time in restricted geographical areas and only when the employee has unique value specific to that employer’s business and not just regarding the professional development of the employee. Any such inability to enforce non-compete covenants may cause us to lose any competitive advantage resulting from advantages provided to us by such confidential information.

We may become subject to claims for remuneration or royalties for assigned service invention rights by our employees, which could result in litigation and adversely affect our business.

A significant portion of our intellectual property has been developed by our Israeli employees in the course of their employment for us. Under the Israeli Patent Law, 5727-1967 (the “Israeli Patent Law”), inventions conceived by an employee during the term and as part of the scope of his or her employment with a company are regarded as "service inventions," which belong to the employer, absent a specific agreement between the employee and employer giving the employee service invention rights. The Israeli Patent Law also provides that if there is no such agreement between an employer and an employee, the Israeli Compensation and Royalties Committee (the “C&R Committee”), a body constituted under the Israeli Patent Law, shall determine whether the employee is entitled to remuneration for his inventions. The C&R Committee (decisions of which have been upheld by the Israeli Supreme Court) has held that employees may be entitled to remuneration for their service inventions despite having specifically waived any such rights. Further, the C&R Committee has not yet set specific guidelines regarding the method for calculating this remuneration or the criteria or circumstances under which an employee’s waiver of his right to remuneration will be disregarded. We generally enter into intellectual property assignment agreements with our employees pursuant to which such employees assign to us all rights to any inventions created in the scope of their employment or engagement with us. Although our employees have agreed to assign to us service invention rights and have specifically waived their right to receive any special remuneration for such assignment beyond their regular salary and benefits, we may face claims demanding remuneration in consideration for assigned inventions. As a consequence of such claims, we could be required to pay additional remuneration or royalties to our current or former employees, or be forced to litigate such claims, which could negatively affect our business.

It may be difficult for investors in the United States to enforce any judgments obtained against us or some of our directors or officers.

The majority of our assets are located outside the U.S. In addition, certain of our officers are nationals and/or residents of countries other than the U.S., and all or a substantial portion of such persons’ assets are located outside the U.S. As a result, it may be difficult for investors to enforce within the United States any judgments obtained against us or any of our non-U.S. officers, including judgments predicated upon the civil liability provisions of the securities laws of the U.S. or any state thereof. Additionally, it may be difficult to assert U.S. securities law claims in actions originally instituted outside of the U.S. Israeli courts may refuse to hear a U.S. securities law claim because Israeli courts may not be the most appropriate forums in which to bring such a claim. Even if an Israeli court agrees to hear a claim, it may determine that the Israeli law, and not U.S. law, is applicable to the claim. Further, if U.S. law is found to be applicable, certain content of applicable U.S. law must be proved as a fact, which can be a time-consuming and costly process, and certain matters of procedure would still be governed by the Israeli law. Consequently, you may be effectively prevented from pursuing remedies under U.S. federal and state securities laws against us or any of our non-U.S. directors or officers.

The tax benefits that are currently available to us under Israeli law require us to satisfy specified conditions. If we fail to satisfy these conditions, we may be required to pay increased taxes and would likely be denied these benefits in the future.

InspireMD Ltd. has been granted a “Beneficiary Enterprise” status by the Investment Center in the Israeli Ministry of Industry Trade and Labor, and we are therefore eligible for tax benefits under the Israeli Law for the Encouragement of Capital Investments, 1959. The main benefit is a two-year exemption from corporate tax, commencing when we begin to generate net income derived from the beneficiary activities in facilities located in Israel, and a reduced corporate tax rate for an additional five years, depending on the level of foreign investment in each year. In addition, under the January 1, 2011 amendment to the Israeli Law for the Encouragement of Capital Investments, 1959, a uniform corporate tax rate of 16% applies to all qualifying income of “Preferred Enterprise,” which we may be able to apply as an alternative tax benefit.

The tax benefits available to a Beneficiary Enterprise or a Preferred Enterprise are dependent upon the fulfillment of conditions stipulated under the Israeli Law for the Encouragement of Capital Investments, 1959 and its regulations, as amended, which include, among other things, maintaining our manufacturing facilities in Israel. If we fail to comply with these conditions, in whole or in part, the tax benefits could be cancelled and we could be required to refund any tax benefits that we received in the past. If we are no longer eligible for these tax benefits, our Israeli taxable income would be subject to regular Israeli corporate tax rates. The standard corporate tax rate for Israeli companies in 2015 is 26.5% and in 2016 is 25% of taxable income. The termination or reduction of these tax benefits would increase our tax liability, which would reduce our profits.

In addition to losing eligibility for tax benefits currently available to us under Israeli law, if we do not maintain our manufacturing facilities in Israel, we will not be able to realize certain tax credits and deferred tax assets, if any, including any net operating losses to offset against future profits.

The tax benefits available to Beneficiary Enterprises may be reduced or eliminated in the future. This would likely increase our tax liability.

The Israeli government may reduce or eliminate in the future tax benefits available to Beneficiary enterprises and Preferred Enterprises. Our Beneficiary Enterprise status and the resulting tax benefits may not continue in the future at their current levels or at any level. The 2011 amendment regarding Preferred Enterprise may not be applicable to us or may not fully compensate us for the change. The termination or reduction of these tax benefits would likely increase our tax liability. The amount, if any, by which our tax liability would increase will depend upon the rate of any tax increase, the amount of any tax benefit reduction, and the amount of any taxable income that we may earn in the future.

Risks Related to Our Organization and Our Common Stock

Our stock price has been and may continue to be volatile, which could result in substantial losses for investors.

The market price of our common stock has been and is likely to continue to be highly volatile and could fluctuate widely in response to various factors, many of which are beyond our control, including the following:

In addition, the securities markets have from time to time experienced significant price and volume fluctuations that are unrelated to the operating performance of particular companies. These market fluctuations may also significantly affect the market price of our common stock.

Our common stock could be delisted from the NYSE MKT if we fail to regain compliance with the NYSE MKT’s continued listing standards on the schedule required by the NYSE MKT.

On January 20, 2015, we received a notice indicating that we do not meet certain of the NYSE MKT’s continued listing standards as set forth in Part 10 of the NYSE MKT Company Guide (“Company Guide”). Specifically, we are not in compliance with Section 1003(a)(iii) of the Company Guide because we reported stockholders’ equity of less than $6 million as of September 30, 2014 and had net losses in our five most recent fiscal years. In addition, the NYSE MKT indicated that we are not in compliance with Section 1003(a)(iv) of the Company Guide because we have sustained losses that are substantial in relation to our overall operations or our existing financial resources, or our financial condition has become impaired such that it appears questionable, in the opinion of the NYSE MKT, as to whether we will be able to continue operations and/or meet our obligations as they mature. As a result, we have become subject to the procedures and requirements of Section 1009 of the Company Guide.

In order to maintain our listing on the NYSE MKT, we submitted a plan of compliance to the NYSE MKT on February 19, 2015 addressing how we intend to regain compliance with Section 1003(a)(iii) of the Company Guide by July 20, 2016 and Section 1003(a)(iv) of the Company Guide by June 1, 2015. On March 9, 2015, we closed a public offering of our common stock and warrants that resulted in net proceeds of approximately $12.5 million after deducting placement agent fees and other estimated offering expenses. In light of this, the NYSE MKT determined that we have resolved the continued listing deficiency with respect to Section 1003(a)(iv) of the Company Guide. In addition, the NYSE MKT has accepted our plan to gain compliance with the Section 1003(a)(iii) of the Company Guide by July 20, 2016.

If we do not regain compliance with Section 1003(a)(iii) of the Company Guide by July 20, 2016, or if we do not maintain our progress consistent with the plan during the applicable plan period, the NYSE MKT will initiate delisting proceedings. The market price and liquidity of our common stock could be adversely affected by the commencement of such proceedings. If those proceedings resulted in delisting of our common stock and resulting cessation of trading of the stock on the NYSE MKT, we believe that the market price and liquidity of our common stock would be adversely affected. 

We do not expect to pay dividends in the future. As a result, any return on investment may be limited to the value of our common stock.

We do not anticipate paying cash dividends on our common stock in the foreseeable future. The payment of dividends on our common stock will depend on our earnings, financial condition and other business and economic factors as our board of directors may consider relevant. We are also subject to certain restrictions pursuant to our loan and security agreement with Hercules Technology Growth Capital, Inc., which prohibits us from paying dividends or distributions on our common stock. If we do not pay dividends, our common stock may be less valuable because a return on an investment in our common stock will only occur if our stock price appreciates.

We are subject to financial reporting and other requirements that place significant demands on our resources.

We are subject to reporting and other obligations under the Securities Exchange Act of 1934, as amended, including the requirements of Section 404 of the Sarbanes-Oxley Act of 2002. Section 404 requires us to conduct an annual management assessment of the effectiveness of our internal controls over financial reporting. These reporting and other obligations place significant demands on our management, administrative, operational, internal audit and accounting resources. Any failure to maintain effective internal controls could have a material adverse effect on our business, operating results and stock price. Moreover, effective internal control is necessary for us to provide reliable financial reports and prevent fraud. If we cannot provide reliable financial reports or prevent fraud, we may not be able to manage our business as effectively as we would if an effective control environment existed, and our business and reputation with investors may be harmed.

There are inherent limitations in all control systems, and misstatements due to error or fraud may occur and not be detected.

The ongoing internal control provisions of Section 404 of the Sarbanes-Oxley Act of 2002 require us to identify of material weaknesses in internal control over financial reporting, which is a process to provide reasonable assurance regarding the reliability of financial reporting for external purposes in accordance with accounting principles generally accepted in the United States. Our management, including our chief executive officer and chief financial officer, does not expect that our internal controls and disclosure controls will prevent all errors and all fraud. A control system, no matter how well conceived and operated, can provide only reasonable, not absolute, assurance that the objectives of the control system are met. In addition, the design of a control system must reflect the fact that there are resource constraints and the benefit of controls must be relative to their costs. Because of the inherent limitations in all control systems, no evaluation of controls can provide absolute assurance that all control issues and instances of fraud, if any, in our company have been detected. These inherent limitations include the realities that judgments in decision-making can be faulty and that breakdowns can occur because of simple errors or mistakes. Further, controls can be circumvented by individual acts of some persons, by collusion of two or more persons, or by management override of the controls. The design of any system of controls is also based in part upon certain assumptions about the likelihood of future events, and there can be no assurance that any design will succeed in achieving its stated goals under all potential future conditions. Over time, a control may be inadequate because of changes in conditions, such as growth of the company or increased transaction volume, or the degree of compliance with the policies or procedures may deteriorate. Because of inherent limitations in a cost-effective control system, misstatements due to error or fraud may occur and not be detected.

In addition, discovery and disclosure of a material weakness, by definition, could have a material adverse impact on our financial statements. Such an occurrence could discourage certain customers or suppliers from doing business with us, cause downgrades in our future debt ratings leading to higher borrowing costs and affect how our stock trades. This could in turn negatively affect our ability to access public debt or equity markets for capital.

Delaware law and our corporate charter and bylaws contain anti-takeover provisions that could delay or discourage takeover attempts that stockholders may consider favorable.

Our board of directors is authorized to issue shares of preferred stock in one or more series and to fix the voting powers, preferences and other rights and limitations of the preferred stock. Accordingly, we may issue shares of preferred stock with a preference over our common stock with respect to dividends or distributions on liquidation or dissolution, or that may otherwise adversely affect the voting or other rights of the holders of common stock. Issuances of preferred stock, depending upon the rights, preferences and designations of the preferred stock, may have the effect of delaying, deterring or preventing a change of control, even if that change of control might benefit our stockholders. In addition, we are subject to Section 203 of the Delaware General Corporation Law. Section 203 generally prohibits a public Delaware corporation from engaging in a “business combination” with an “interested stockholder” for a period of three years after the date of the transaction in which the person became an interested stockholder, unless (i) prior to the date of the transaction, the board of directors of the corporation approved either the business combination or the transaction which resulted in the stockholder becoming an interested stockholder; (ii) the interested stockholder owned at least 85% of the voting stock of the corporation outstanding at the time the transaction commenced, excluding for purposes of determining the number of shares outstanding (a) shares owned by persons who are directors and also officers and (b) shares owned by employee stock plans in which employee participants do not have the right to determine confidentially whether shares held subject to the plan will be tendered in a tender or exchange offer; or (iii) on or subsequent to the date of the transaction, the business combination is approved by the board and authorized at an annual or special meeting of stockholders, and not by written consent, by the affirmative vote of at least 66 2/3% of the outstanding voting stock which is not owned by the interested stockholder. 

Section 203 could delay or prohibit mergers or other takeover or change in control attempts with respect to us and, accordingly, may discourage attempts to acquire us even though such a transaction may offer our stockholders the opportunity to sell their stock at a price above the prevailing market price.

Offers or availability for sale of a substantial number of shares of our common stock may cause the price of our common stock to decline.

Sales of a significant number of shares of our common stock in the public market could harm the market price of our common stock and make it more difficult for us to raise funds through future offerings of common stock. Our stockholders and the holders of our options and warrants may sell substantial amounts of our common stock in the public market. The availability of these shares of our common stock for resale in the public market has the potential to cause the supply of our common stock to exceed investor demand, thereby decreasing the price of our common stock.

In addition, the fact that our stockholders, option holders and warrant holders can sell substantial amounts of our common stock in the public market, whether or not sales have occurred or are occurring, could make it more difficult for us to raise additional financing through the sale of equity or equity-related securities in the future at a time and price that we deem reasonable or appropriate.

If securities and/or industry analysts fail to continue publishing research about our business, if they change their recommendations adversely or if our results of operations do not meet their expectations, our stock price and trading volume could decline.

The trading market for our common stock will be influenced by the research and reports that industry or securities analysts publish about us or our business. If one or more of these analysts cease coverage of our company or fail to publish reports on us regularly, we could lose visibility in the financial markets, which in turn could cause our stock price or trading volume to decline. In addition, it is likely that in some future period our operating results will be below the expectations of securities analysts or investors. If one or more of the analysts who cover us downgrade our stock, or if our results of operations do not meet their expectations, our stock price could decline.

Risks Related to our Indebtedness

Our obligations under our $10 million principal term loan are secured by substantially all of our assets, so if we default on those obligations, the lender could foreclose on our assets. As a result of these security interests, such assets would only be available to satisfy claims of our general creditors or to holders of our equity securities if we were to become insolvent at a time when the value of such assets exceeded the amount of our indebtedness and other obligations. In addition, the existence of these security interests may adversely affect our financial flexibility.

The lender under our $10 million principal term loan has a security interest in substantially all of our assets and those of InspireMD Ltd., our wholly-owned subsidiary. As a result, if we default under our obligations to the lender, the lender could foreclose on its security interests and liquidate some or all of these assets, which would harm our business, financial condition and results of operations.

In the event of a default in connection with our bankruptcy, insolvency, liquidation, or reorganization, the lender would have a prior right to substantially all of our assets to the exclusion of our general creditors. In that event, our assets would first be used to repay in full all indebtedness and other obligations secured by the lender, resulting in all or a portion of our assets being unavailable to satisfy the claims of any unsecured indebtedness. Only after satisfying the claims of any unsecured creditors would any amount be available for our equity holders.

The pledge of these assets and other restrictions may limit our flexibility in raising capital for other purposes. Because substantially all of our assets are pledged under the $10 million principal term loan, our ability to incur additional secured indebtedness or to sell or dispose of assets to raise capital may be impaired, which could have an adverse effect on our financial flexibility.

Our loan and security agreement contains customary events of default. In addition, an event of default will include the occurrence of a circumstance that would reasonably be expected to have a material adverse effect upon (i) our business, operations, properties, assets, prospects or condition (financial or otherwise), (ii) our ability to perform our obligations under the agreement and any related loan documents or (iii) the collateral, the lender’s liens on the collateral or the priority of such liens.

We have a substantial amount of indebtedness, which may adversely affect our cash flow and our ability to operate our business.

Pursuant to the terms of our loan and security agreement, the lender made a term loan to us and InspireMD Ltd. in aggregate amount of $10 million. We are required to make monthly payments of interest and principal in the amount of approximately $380,000 per month. The final payment of the loan will be February 1, 2017. The current principal amount of the loan as of March 1, 2016 was $4.0 million.

The terms of our term loan could have negative consequences to us, such as:

Our ability to meet our expenses and debt obligations will depend on our future performance, which will be affected by financial, business, economic, regulatory and other factors. We will be unable to control many of these factors, such as economic conditions. We cannot be certain that our earnings will be sufficient to allow us to pay the principal and interest on our debt and meet any other obligations. If we do not have enough money to service our debt, we may be required, but unable to refinance all or part of our existing debt, sell assets, borrow money or raise equity on terms acceptable to us, if at all, and the lender could foreclose on its security interests and liquidate some or all of our assets.

Our loan and security agreement contains covenants that could limit our financing options and liquidity position, which would limit our ability to grow our business.

Covenants in our loan and security agreement impose operating and financial restrictions on us. These restrictions prohibit or limit our ability, and the ability of InspireMD Ltd., to, among other things:

These restrictions may limit our ability to obtain additional financing, withstand downturns in our business or take advantage of business opportunities. Moreover, additional debt financing we may seek, if permitted, may contain terms that include more restrictive covenants, may require repayment on an accelerated schedule or may impose other obligations that limit our ability to grow our business, acquire needed assets, or take other actions we might otherwise consider appropriate or desirable.

SPECIAL NOTE REGARDING FORWARD-LOOKING STATEMENTS

This Annual Report on Form 10-K contains “forward-looking statements,” which include information relating to future events, future financial performance, strategies, expectations, competitive environment and regulation. Words such as “may,” “should,” “could,” “would,” “predicts,” “potential,” “continue,” “expects,” “anticipates,” “future,” “intends,” “plans,” “believes,” “estimates,” and similar expressions, as well as statements in future tense, identify forward-looking statements. Forward-looking statements should not be read as a guarantee of future performance or results and will probably not be accurate indications of when such performance or results will be achieved. Forward-looking statements are based on information we have when those statements are made or our management’s good faith belief as of that time with respect to future events, and are subject to risks and uncertainties that could cause actual performance or results to differ materially from those expressed in or suggested by the forward-looking statements. Important factors that could cause such differences include, but are not limited to:

You should review carefully the risks and uncertainties described under the heading “Item 1A. Risk Factors” in this Annual Report on Form 10-K for a discussion of these and other risks that relate to our business and investing in shares of our common stock. The forward-looking statements contained in this Annual Report on Form 10-K are expressly qualified in their entirety by this cautionary statement. We do not undertake any obligation to publicly update any forward-looking statement to reflect events or circumstances after the date on which any such statement is made or to reflect the occurrence of unanticipated events.