United States
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549

 

FORM 20-F

 

¨ REGISTRATION STATEMENT PURSUANT TO SECTION 12(b) or (g) OF THE SECURITIES EXCHANGE ACT OF 1934

or

x ANNUAL REPORT PURSUANT TO SECTION 13 or 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

 

For the fiscal year ended March 31, 2017.

 

¨ TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from ____________ to ____________.

 

¨ SHELL COMPANY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

 

Commission file number 0-28990

 

HIGHWAY HOLDINGS LIMITED

(Exact name of Registrant as specified in its charter)

 

British Virgin Islands

(Jurisdiction of incorporation or organization)

 

Suite 1801, Level 18, Landmark North 39 Lung Sum Avenue

Sheung Shui

New Territories, Hong Kong

(Address of principal executive offices)

 

Roland Kohl

Chief Executive Officer

Suite 1801, Level 18, Landmark North

39 Lung Sum Avenue

Sheung Shui

New Territories, Hong Kong
telephone: (852) 2344-4248
fax: (852) 2343-4976
roland.kohl@highwayholdings.com
(Name, Telephone, E-mail and/or Facsimile number and Address of Company Contact Person)

 

Securities registered or to be registered pursuant to Section 12(b) of the Act:

 

Title of each class   Name of each exchange on which registered
     
Common Shares, $0.01 par value per share   NASDAQ Capital Market

 

Securities registered or to be registered pursuant to Section 12(g) of the Act: None

 

Securities for which there is a reporting obligation pursuant to Section 15(d) of the Act: None

 

Indicate the number of outstanding shares of each of the issuer’s classes of capital or common stock as of the close of the period covered by the annual report 3,801,874 Common Shares were outstanding as of March 31, 2017.

 

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes   ¨    No   x

 

If this report is an annual or transition report, indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934. Yes  ¨    No   x

 

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes   x     No  ¨  

 

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes  x  No  ¨   

 

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, or a non-accelerated filer. See definition of “accelerated filer and large accelerated filer” in Rule 12b-2 of the Exchange Act. (Check one):

 

Large accelerated filer   ¨   Accelerated filer   ¨   Non-accelerated filer x
        Emerging growth company ¨

 

If an emerging growth company that prepares its financial statements in accordance with U.S. GAAP, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ¨

 

Indicate by check mark which basis of accounting the registration has used to prepare the financial statements included in this filing:

 

U.S. GAAP x International Financial Reporting
Standards as issued by the
International Accounting Standards
Board ¨
Other ¨

 

If “Other” has been checked in response to the previous question, indicate by check mark which financial statement item the registrant has elected to follow: Item 17 ¨ Item 18 x

 

If this is an annual report, indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).  Yes   ¨    No   x

 

 

 

 

TABLE OF CONTENTS

 

    Page
     
PART I   2
     
Item 1. Identity of Directors, Senior Management and Advisers 2
Item 2. Offer Statistics and Expected Timetable 2
Item 3. Key Information 2
Item 4. Information on the Company 20
Item 4.A. Unresolved Staff Comments 36
Item 5. Operating and Financial Review and Prospects 36
Item 6. Directors, Senior Management and Employees 48
Item 7. Major Shareholders and Related Party Transactions 54
Item 8. Financial Information 55
Item 9. The Offer and Listing 56
Item 10. Additional Information 57
Item 11. Quantitative and Qualitative Disclosures About Market Risk 62
Item 12. Description of Securities Other Than Equity Securities 63
     
PART II   63
     
Item 13. Defaults, Dividend Arrearages and Delinquencies 63
Item 14. Material Modification to the Rights of Securities Holders and Use of Proceeds 63
Item 15. Controls and Procedures 64
Item 16. Not applicable 65
Item 16A. Audit Committee Financial Expert 65
Item 16B. Code of Ethics 65
Item 16C. Principal Accountant Fees and Services 65
Item 16D. Exemptions from the Listing Standards for Audit Committees 66
Item 16E. Purchases of Equity Securities by the Issuer and Affiliated Purchasers 66
Item 16F. Change in Registrant’s Certifying Accountant 66
Item 16G. Corporate Governance 66
Item 16H. Mine Safety Disclosure 66
     
PART III   66
     
Item 17. Financial statements 66
Item 18. Financial statements 67
Item 19. Exhibits 67

 

i

 

 

FORWARD - LOOKING STATEMENTS

 

This annual report contains forward-looking statements that involve risks and uncertainties. All statements other than statements of historical facts are forward-looking statements. These forward-looking statements are made under the “safe harbor” provisions of the U.S. Private Securities Litigation Reform Act of 1995. These statements involve known and unknown risks, uncertainties and other factors that may cause our actual results, performance or achievements to be materially different from those expressed or implied by the forward-looking statements.

 

You can identify these forward-looking statements by words or phrases such as “may,” “will,” “expect,” “is expected to,” “anticipate,” “aim,” “estimate,” “intend,” “plan,” “believe,” “are likely to” or other similar expressions. We have based these forward-looking statements largely on our current expectations and projections about future events and financial trends that we believe may affect our financial condition, results of operations, business strategy and financial needs. These forward-looking statements include, but are not limited to:

 

· the Company’s goals, strategies and expansion plans;

 

· the Company’s business development, financial condition and results of operations;

 

· our anticipated business activities and the expected impact of these actions on our results of operations and financial condition;

 

· expected changes in our revenues and certain cost or expense item;

 

· the demand for, and market acceptance of, the Company’s products and services;

 

· changes in the Company’s relationships with its major customers;

 

· political, regulatory or economic changes in Hong Kong, Shenzhen, China, and Myanmar that affect the Company, including inflation, labor laws and worker relations, changing governmental rules and regulations, and structural factors affected manufacturing operators in general; and

 

· general economic and business conditions affecting the Company’s major customers.

 

You should read this annual report and the documents that we refer to in this annual report thoroughly and with the understanding that our actual future results may be materially different from and worse than what we expect. We qualify all of our forward-looking statements by these cautionary statements. Other sections of this annual report, including the section titled “Risk Factors” beginning on page 3, include additional factors which could adversely impact our business and financial performance. Moreover, we operate in an evolving environment. New risk factors and uncertainties emerge from time to time and it is not possible for our management to predict all risk factors and uncertainties, nor can we assess the impact of all factors on our business or the extent to which any factor, or combination of factors, may cause actual results to differ materially from those contained in any forward-looking statements.

 

  1  

 

 

You should not rely upon forward-looking statements as predictions of future events. Except as required by law, we undertake no obligation to update or revise any forward-looking statements, whether as a result of new information, future events or otherwise

 

CONVENTIONS

 

Highway Holdings Limited is a British Virgin Islands holding company that operates through various controlled subsidiaries. Unless the context indicates otherwise, all references herein to “the Company” refer collectively to Highway Holdings Limited and its subsidiaries. References to “China” or “PRC” are to the People’s Republic of China (excluding Hong Kong), whereas references to “Hong Kong” are to the Hong Kong Special Administrative Region of the People’s Republic of China. References to Myanmar are to the Republic of the Union of Myanmar (“Myanmar”). Unless otherwise stated, all references to “dollars” or $ are to United States dollars. “RMB,” “Renminbi” or “yuan” are references to the legal currency of China. The U.S. Securities and Exchange Commission is referred to in this Annual Report as the “SEC.”

 

PART I  

 

Item 1.   Identity of Directors, Senior Management and Advisers

 

Not Applicable

 

Item 2.   Offer Statistics and Expected Timetable

 

Not Applicable

 

Item 3.   Key Information

 

The Company’s historical consolidated financial statements are prepared in accordance with accounting principles generally accepted in the United States (“GAAP”) and presented in United States dollars. The following selected statements of operations data for each of the three years in the period ended March 31, 2017 and the balance sheet data as of March 31, 2016 and 2017 are derived from the Company’s consolidated financial statements and notes thereto included in this Annual Report. The selected statements of operations data for each of the years ended March 31, 2013 and 2014 and the balance sheet data as of March 31, 2013, 2014 and 2015 were derived from the Company’s consolidated financial statements, which are not included in this Annual Report. The selected information is qualified in its entirety by reference to, and should be read in conjunction with, such consolidated financial statements, related notes and “Operating and Financial Review and Prospects” included as Item 5 in this report.

 

  2  

 

 

Selected Consolidated Financial Information

 

(In thousands, except for per share data):

 

    2013     2014     2015     2016     2017  
Statement of Operations                                        
Net sales   $ 21,933     $ 22,936     $ 22,373     $ 22,935     $ 19,603  
Gross profit     4,904       5,452       5,717       5,928       5,570  
Operating income     355       793       1,271       1,516       761  

Net income attributable to Highway Holdings Limited 
shareholders

    448       596       1,150       1,251       527  
Per share amounts                                        
Net income-basic   $ 0.12     $ 0.16     $ 0.30     $ 0.33     $ 0.14  
Net income-diluted     0.12       0.16       0.30       0.33       0.14  
Dividend declared(1)     0.12       0.12       0.30       0.40       0.27  
Weighted average number of shares:                                        
Basic     3,779       3,779       3,787       3,802       3,802  
Diluted     3,781       3,789       3,795       3,802       3,802  
Dividend declared (1)   $ 454     $ 454     $ 1,138     $ 1,521     $ 1,026  
                                         
Balance Sheet Data                                        
Property, plant and equipment, net   $ 1,769     $ 1,213     $ 1,094     $ 1,121     $ 954  
Working capital     10,131       10,374       11,016       10,657       10,200  
Total assets     15,352       15,776       16,987       17,039       17,552  
Long term debt     112       -       -       -        
Common shares     38       38       38       38       38  
Total equity     12,008       12,146       12,233       11,934       11,310  
Common shares issued and outstanding     3,784       3,784       3,802       3,802       3,802  

 

 

(1) Represents dividends declared during the fiscal year and not necessarily the payment date (dividends declared in one fiscal year may have been be paid to shareholders in the subsequent fiscal year).

 

RISK FACTORS

 

The Company’s business and operations involve numerous risks, some of which are beyond the Company’s control, which may affect future results and the market price of the Company’s Common Shares. The following discussion highlights all the material risks the Company faces.

 

  3  

 

 

The Company is now Required to Conduct its Manufacturing Operations Under Certain Rules and Regulations Applicable to Domestic Chinese Companies That Previously Did Not Affect the Company. Since the Company commenced its manufacturing operations in China in 1991, the Company has conducted its operations in Long Hua, Shenzhen, China, pursuant to various agreements entered into, primarily, between two of the Company’s subsidiaries and the Shenzhen City Baoan District Foreign Economic Development Head Company and its designees (collectively, the “BFDC”) (the agreements, collectively the “BFDC Agreements”). Under the BFDC Agreements, the BFDC was the party responsible for providing manufacturing facilities for the Company and for supplying workers to the Company. The Company paid the BFDC a management fee and certain other charges for the use of the facilities and the services of the workers. Because the Company’s manufacturing operations in Long Hua, Shenzhen, were conducted under the BFDC Agreements, its operations were not subject to many of the rules and regulations that would be imposed on entities that were considered under China law to be doing business in China (either as joint venture or as a wholly owned subsidiary organized in China). For example, the Company did not have to apply for permits or licenses in China or to register to do business in China and received beneficial treatment with respect to import/export taxes and duties.

 

In 2010, the Company received official governmental notice that the foregoing BFDC license structure of operations would no longer be permitted and that, accordingly, all foreign companies operating under that structure, including the Company’s two subsidiaries that operated in Shenzhen, would have to reorganize their operations and register in China as a local company. As a result of the foregoing governmental decree, the Company formed Nissin Metal and Plastic (Shenzhen) Company Limited (herein referred to as “Nissin PRC”), a new wholly-owned subsidiary that is now a registered company in the PRC, and discontinued Nissin’s operations under the BFDC Agreements. All of Nissin’s assets, equipment, employees and manufacturing operations were transferred from Nissin Precision Metal Manufacturing Limited (herein referred to as “Nissin HK”), one of its Hong Kong subsidiaries, to Nissin PRC in 2011. The Company’s other operating entity in Shenzhen, China, Hi-Lite Camera Company Limited (“Hi-Lite”), continued to operate in Shenzhen under the BFDC Agreements until 2016. However, Hi-Lite has now also transferred all of its assets and operations to Nissin PRC and has officially ceased operating under the BFDC Agreement. Hi-Lite is currently being dissolved. The dissolution process normally takes several years and involves several governmental agencies. While the Company believes that it has made all necessary payments to dissolve Hi-Lite, no assurance can be given that these governmental agencies will not during the dissolution process determine that the Company has to make additional payments to complete the dissolution. As a result of the termination of the operations of both Nissin HK and Hi-Lite, all of the Company’s future operations in China are now conducted through Nissin PRC. A foreign owned subsidiary, such as Nissin PRC, that is registered in China is commonly known as a “foreign invested enterprise” (a “FIE”), or as a “Wholly Foreign Owned Enterprise” (a “WFOE”). As a new PRC registered WFOE, Nissin PRC is now permitted to hire its own employees, lease its own facilities, and distribute its products in China. However, unlike the Company’s prior arrangements under the BFDC Agreements, Nissin PRC now has to obtain and maintain its own permits and licenses, is subject to China’s income and business taxes, and is subject to the rules and regulations applicable to other PRC registered companies. Most of these new rules, permits and taxes previously did not apply to its operations in China under the BFDC Agreements. These new rules, regulations and taxes have made the operations of Nissin PRC more cumbersome and expensive. To date, the Company has managed to restructure the operations of its new PRC subsidiary in a manner that has enabled it to comply with the additional rules and regulations. However, no assurance can be given that the Company will be able to continue to operate profitably through Nissin PRC and will be able to comply with future regulations and restrictions.

 

  4  

 

 

Terminating the BFDC Agreements and Conducting its Operations Through a Wholly Foreign Owned Enterprise Has Increased the Company’s Cost of Operations in Shenzhen, China, and Could Result in Additional Unexpected Costs. As part of the governmentally required transfer of the operations of the Company from the BFDC Agreements to a WFOE, the Company’s Nissin PRC wholly-owned limited liability company is now a registered PRC company and is governed by the PRC’s company laws and regulations. The cost of conducting operations through Nissin PRC is substantially higher than the operating under the BFDC Agreements. The regulations imposed on Nissin PRC have resulted in increased taxes and increased regulatory and accounting burdens. For example, Nissin PRC has to charge value added tax (“VAT”) on all of the products that its sells locally, and has to pay VAT on materials it purchases locally. Depending on the classification of products and/or materials not all of the VAT tax is refunded to Nissin PRC when it exports these products. As a result, the VAT increases the overall cost of those products. The Company, therefore, must either pass these increased costs on to its customers (which hurts the Company’s price competitiveness and its customer relations), or absorb the cost increases through smaller profit margins (which reduces the benefits of such sales to the Company). No assurance can be given that the cost of operating Nissin PRC as a WFOE will not continue to increase and will not further negatively affect the Company and its operations.

 

Changes in Labor Laws, Environmental Regulation, Safety Regulation and Business Practices, and Operating Costs in China, and in Shenzhen, China, in Particular, Have Significantly Increased the Costs and Risks of Doing Business . For the past few decades, foreign owned enterprises such as the Company have established manufacturing/assembly facilities in China because of China’s lower labor costs, lower facilities costs, less stringent environmental regulations, and certain benefits provided to foreign entities to encourage operations in China. As described elsewhere in this Annual Report, the Chinese government has during the past few years significantly changed many of its laws and regulations applicable to foreign owned enterprises and has removed many of the laws that encourage foreign investment. In addition, the cost of labor, real estate and raw materials has significantly increased, and major economic and social changes have occurred in China. Combined, these new laws, increased costs, and the changes in the social and economic environment have made operating in China as a foreign owned manufacturer much more expensive and difficult and, in general, have made operating in China less attractive financially. Changes that continue to affect the Company include increased enforcement of laws affecting workers (including regulations regarding their salaries and benefits, labor unions, working conditions and overtime restrictions, and contract duration), changing environmental regulations, more burdensome import/export regulations. For example, the recently enacted regulations now require companies to make payments to up to six different employee benefit funds for each employee, which has significantly increased the Company’s cost of employment. In addition, the Chinese government has also changed or increased the enforcement of certain environment protection laws, which have restricted some common practices and/or increased the Company’s cost of operations. Employees now have the right to enforce labor laws relating to their termination and the right to strike. The Company has, in the past, been subject to labor strikes and may be subject to labor action in the future. These factors have significantly increased the cost of doing business in China which, in turn, has required the Company to increase its prices to its customers. The increased prices charged to customers has resulted in the loss of some customers who have decided to source their parts from original equipment manufacturers (“OEMs”) located other low-cost countries, such as Myanmar, Vietnam, and Mexico. The foregoing factors have adversely affected the Company’s recent financial results. While the Company has taken steps to offset the costs and burdens of doing business in China (primarily by increasing automation and moving labor intensive activities to Myanmar), no assurance can be given that in the longer term the Company will be able to continue to operate in China and/or prosper under the new and evolving business or regulatory conditions in China.

 

  5  

 

 

Changing Internal Fiscal, Regulatory and Political Changes Continue to Negatively Affect The Company’s Operations in China . The Company’s main manufacturing facilities are located in China. As a result, the Company’s operations and assets are subject to all of the political, economic, legal and other uncertainties associated with doing business in China. Changes in policies by the Chinese government to its laws, regulations, or the interpretation thereof, the imposition of confiscatory taxation, restrictions on imports and sources of supply, currency re-valuations, or the expropriation of private enterprises, could materially adversely affect the Company. For example, the Chinese government has recently been imposing burdensome import regulations on companies, such as the Company, that heavily rely on imports of raw materials. While the Company has, to date, been able to continue its operations in China despite these changes, no assurance can be given that the increasing regulations and the more restrictive government policies will not, in the future, cause the Company’s operations to become financially untenable or otherwise materially affect its business, operations and financial condition.

 

Increased Wages And The Other Costs Of Labor in China Have a Material Negative Affect The Company’s Operations And Continue to Increase Its Operating Costs . Minimum wages in China in general, and in Shenzhen in particular, have significantly increased during the past few years. While the Company pays its employees more than the minimum wage, the increase in the minimum wage has required the Company and other local manufacturers to increase their salaries by approximately the same percentage. Increases in wages also result in increases in employer contributions for various mandatory social welfare benefits for Chinese employees that are based on percentages of their salaries. These increases in the cost of labor will continue to increase the Company’s operating costs and will adversely affect its financial results unless the Company is able pass on such increases to our customers by increasing the prices of our products and services. In response to the increased cost of labor (as well as the other increases in doing business in Shenzhen), the Company has increased the prices that it charge its customers. The effect of these increases in the prices of the Company’s products and services has resulted, and may continue to result in the loss of customers, who may seek, and are able to obtain, products and services comparable to those we offer in lower-cost regions of the world or from certain local Chinese companies that receive governmental support of subsidies. During the past few fiscal years, one of the Company’s larger customers was unwilling to pay the higher prices that the Company had to charge in response to higher cost of operations and, accordingly, no longer uses the Company’s services. Future increases in the Company’s costs and in the prices that it charges its customers may result the loss of additional customer and in the loss of revenues, which could affect the Company’s financial results.

 

  6  

 

 

In response to these material, continuing increases in wages and labor related costs, the Company has, during the past few years, been increasing the amount of automation and its use of robotics in its operations and has been attempting to move most of the Company’s labor intensive work to lower labor cost countries. As a result of the increased automation and its ability to shift labor intensive operations to Myanmar (formerly Burma), the Company has been able to reduce the number of employees that it employs in Shenzhen from almost two thousand a few years ago, to approximately 235 currently. However, the cost of acquiring and manufacturing automation equipment has been high, and the increases in productivity and the decreases in the cost of production that result from automation have not fully offset the increased labor costs. As a result, during the past two years the Company has been shifting much of its labor intensive assembly operations from Shenzhen, China, to Yangon, Myanmar, a city/country where labor costs are substantially lower than in Shenzhen, China. During the fiscal year ended March 31, 2017, the Company owned an 84% interest of a Myanmar company that operates an assembly facility in Yangon, Myanmar. Since the end of the last fiscal year, the Company increased its ownership interest in the Myanmar manufacturing company to 84%. The Company intends to increasingly shift its labor intensive operations and other functions that are highly regulated in China (such as painting and plating), to that Myanmar facility.

 

The Company Faces Numerous Risks In Its Expanding Operations In Myanmar . Following decades of authoritarian rule, Myanmar recently enacted various political and economic reforms that have made it possible for foreign businesses to own an interest in a Myanmar company. In addition, the U.S. and European Union recently lifted many trade sanctions with Myanmar. As a result, a number of international and other enterprises have started acquiring interests in businesses in Myanmar. Due to the increasing costs and regulatory burdens of operating in China, a few years ago the Company decided to transfer much of its China operations to Myanmar. Accordingly, in March 2015 the Company completed its acquisition of 75% of Kayser Myanmar Manufacturing Company Ltd. (“Kayser Myanmar”), a foreign company registered to operate in Myanmar. In January 2017 the Company increased its ownership interest in Kayser Myanmar to 84%. During the past two fiscal years, the Company has transferred equipment from its Shenzhen, China, facilities to the Myanmar company in order to enable the Myanmar company to assemble and manufacture the Company’s products. To date, the Company has shifted the assembly of two of its product lines, some manufacturing functions, and its painting operations to Kayser Myanmar as part of the Company’s plan to shift much of its labor intensive assembly and manufacturing operations to Myanmar. In addition to the assembly services currently performed in Myanmar, the Company recently commenced transferring some of its component manufacturing equipment to Myanmar. However, operating in an underdeveloped country such as Myanmar is subject to numerous risks and uncertainties. These risks include the labor relations issues (including strikes), lack of infrastructure, high rent for suitable factories and land (which rates appear to be continuing to increase), uncertain rules and regulations, unpredictable access to utilities (including electricity), cultural and political issues with local governmental authorities, and the lack of international financing expertise. The operations in Myanmar also are subject to the currency risks associated with the Myanmar Kyat (MMK), the official currency of that country. Myanmar recently permitted the exchange rate between the Kyat and the U.S. dollar to fluctuate. Such currency fluctuations could affect the operations in Myanmar, which would impact the Company’s plan to relocate some of its assembly functions to the Yangon, Myanmar facility. No assurance can be given that unfavorable currency fluctuations will not occur in the future.

 

  7  

 

 

The Company Recently Experienced a Worker’s Strike In Myanmar, Which Affected its Operations and May Continue to Negatively Impact the Company’s Future Operations in Myanmar. Earlier this year, Myanmar workers at unaffiliated garment factories near Kayser Myanmar’s facilities in Yangon went on strike because of the working conditions and wages at those other factories. The success of the strikes at other factories seems to have encouraged some workers at the Kayser Myanmar factory to make demands on that company. As a result, while both the working conditions and wages at Kayser Myanmar are substantially better and higher than at the nearby garment facilities, a number of workers at Kayser Myanmar also went on strike. In order to reduce the impact of the partial strike on the operations of Kayser Myanmar, that company chose to increase the salaries that it paid to the workers who did not go on strike. While a larger strike at Kayser Myanmar was averted, Kayser Myanmar’s overall cost of labor has increased. Furthermore, to address the issues that arose primarily at the unaffiliated garment factories, the Myanmar government may make material changes to the labor laws in Myanmar, which labor law changes could make operating in Myanmar by Kayser Myanmar more expensive and difficult. Since the Company’s plan is to shift much of its expensive and highly regulated work from its China facility to Kayser Myanmar, increasing the cost of labor and imposing additional regulations in Myanmar may make the future operations in Myanmar economically uninteresting. No assurance can be given that Kayser Myanmar will be able to operate in a cost efficient manner in the future. Should Kayser Myanmar continue to experience increased costs and regulatory restrictions, the Company may lose the low cost benefits of operating in Myanmar that it was expecting in order to continue to service its larger clients.

 

The Company’s Customers May Not Permit Their Products To Be Manufactured In Myanmar, Which Would Negatively Affect The Company’s Plans To Move Much Of Its Assembly and Manufacturing Operations To Myanmar . Shifting part of its assembly and manufacturing operations from the higher cost operations in China to the lower cost facility in Myanmar is part of the Company’s business plan to retain its existing customers and to increase its competitiveness in the OEM marketplace. However, the Company will not be able to shift its assembly and/or manufacturing operations from Shenzhen, China, to Yangon, Myanmar, without the prior approval of its customers. To date, a few of the Company’s customers have permitted some of the assembly work on their products to be subcontracted to the Myanmar facility. While the quality of the products manufactured at Kayser Myanmar has satisfied the Company’s customers, other customers have been reluctant to permit the Company to outsource the manufacture of their products to the Myanmar assembly facility because of political and public relations issues. Unless more of the Company’s customers allow the Company to shift the assembly and/or manufacture of products to Myanmar, the Company’s goal of offsetting its high costs of assembly in China may not be fully realized. While the Myanmar operations have, to date, met the expectations of the Company and its customers, no assurance can be given that enough assembly and manufacturing work can be subcontracted to Myanmar to materially lower the Company’s overall costs and to improve its price competitiveness.

 

  8  

 

 

Uncertain Legal System and Application of Laws . The legal systems of China and Myanmar are often unclear and are continually evolving, and there can be no certainty as to the application of laws and regulations in particular instances. While China has an increasingly comprehensive system of laws, the application of these laws by the existing regional and local authorities is often in conflict and subject to inconsistent interpretation, implementation and enforcement. New laws and changes to existing laws occur quickly and sometimes unpredictably. As is the case with all businesses operating in both China and Myanmar, the Company often is also required to comply with informal laws and trade practices imposed by local and regional administrators. Local taxes and other charges are levied depending on the local needs for tax revenues and may not be predictable or evenly applied. These local and regional taxes/charges and governmentally imposed business practices often affect the Company’s cost of doing business and require the Company to constantly modify its business methods to both comply with these local rules and to lessen the financial impact and operational interference of such policies. While the Company has, to date, been able to increase its compliance with the regulations and operate within the newly enforced rules and business practices in China, no assurance can be given that it will continue to be able to do so in the future. Should the local or regional governments or administrators impose new practices or levies that the Company cannot effectively respond to, or should the administrators continue to enforce more of those rules that they have not previously enforced, the Company’s operations and financial condition could be materially and adversely impacted. The Company’s ability to appeal many of the local and regionally imposed laws and regulations is limited, and the Company may not be able to seek adequate redress for laws that materially damage its business. The Chinese judiciary is relatively inexperienced in enforcing the laws that exist, leading to a higher than usual degree of uncertainty as to the outcome of any litigation. Even where adequate laws do exist in China, it may not be possible to obtain swift and equitable enforcement of that law.

 

Transactions Between The Company And Its Subsidiaries May Be Subject To Scrutiny By Various Tax Authorities And Could Expose The Company To Additional Taxes . The Company operates through various subsidiaries in various countries. These subsidiaries make inter-company purchases at various prices. Under China’s enterprise income tax law, all such inter-company transactions have to be made on an arm’s-length basis and are subject to scrutiny as transfer pricing transactions between related parties. Transactions between the various subsidiaries located inside and outside of China must also meet China’s transfer pricing documentation requirements that include the basis for determining pricing between the related entities, as well as the computation methodology. The Company could face material and adverse consequences if the Chinese tax authorities determine that transactions between the Company’s various subsidiaries do not represent arm’s-length pricing regulations and, therefore, that such transactions are deemed to be structured to avoid taxes. Such a determination could result in increased tax liabilities of the affected subsidiaries and potentially subject the Company to late payment interest and other penalties.

 

Political Or Trade Controversies Between China And The United States Could Harm The Company’s Operating Results Or Depress The Company’s Stock Price . Relations between the U.S. and China have during the past few years been strained as a result of numerous events that have threatened the business relations between the countries. These strains on U.S./China relations could affect the ability of foreign companies listed on U.S. stock markets, such as the Company, from operating in China. Also, strains between the U.S. and China could interfere with the ability of companies manufacturing in China from engaging in business with, or selling to the U.S. or to U.S. companies. Any disruption of the current trade relations with the U.S. could have a material adverse effect on the Company’s business. No assurance can be given that these and any other future controversies will not change the status quo involving peaceful trade relations between the U.S. and China, or that the Company’s business and operations in China will not be materially and adversely affected. Even if trade relations between the U.S. and China are not affected by political difficulties between the two countries, such political friction could adversely affect the prevailing market price for the Company’s Common Shares.

 

  9  

 

 

China’s Political Issues With Japan Could Harm The Company’s Operations. As a result of the dispute between Japan and China (such as the dispute over the Senkaku/Diaoyu island chain), the business environment has deteriorated for companies in China that do business with Japan or otherwise appear to be connected to Japan. Since the name of the Company’s subsidiary in China is a Japanese name (“Nissin”), and possibly because that subsidiary produces products for Japanese customers, the Company believes that its subsidiary has been subject to heightened scrutiny by Chinese authorities that may impact its operations. Accordingly, political strains between China and Japan may negatively impact the Company on-going operations in China.

 

Labor Shortages and Turnover . One of the principal economic advantages of locating the Company’s operations in China and Myanmar has been the availability of low cost labor. Due to the enormous growth in manufacturing in China, workers’ higher salary expectations, and the aftereffects of China’s one-child policy, the Company has recently experienced difficulty in filling its lower cost labor needs. In addition to the recently developing tight labor market, the Company has also been affected by cyclical trends and other shortages in labor supply. The Company regularly faces severe labor shortages in Shenzhen as a result of the Chinese New Year during which time the Company follows the customary practice at its factory complex to grant its employees home leave and to, therefore, temporarily discontinuing operations. Any material or prolonged shortage of labor would have a material adverse effect on the Company’s results of operations. As a result of the high cost of labor, the changing nature of the labor market, and the departure of employees that typically occurs during the Chinese New Year, many of the Company’s assembly workers have to be replaced every year. The cost of hiring and training new employees adds to the Company’s overall cost of operations. Myanmar also observes an extended new year’s celebration during which all workers leave.

 

Import Duties and Restrictions May Negatively Affect The Company’s Operations and Liquidity. China is increasingly regulating and monitoring imports of raw materials and parts by manufacturers in China, which regulations make it more burdensome and expensive to import the materials the Company needs to manufacture its products. Failure by the Company or by third parties who perform transportation services for the Company to comply with the import regulations can lead to financial penalties on the Company, to additional restrictions on import activities, and could even result in the prohibition of future duty free import/exports by the Company. Any such prohibition would adversely affect the Company’s business and operations. No assurance can be given that the Company or its transportation service providers will be able to, or will in fact fully comply with the increased import regulations. Furthermore, the local authorities in China in 2012 imposed a “Customs License Deposit” on the import of raw materials, including sheet metal imported by the Company. These customs deposits serve as a guarantee to make sure that importers, including the Company, re-export all imported materials within a one-year period. As a result of this new deposit requirement, the Company has had to deposit refundable payments with the Chinese Customs Department based on its import contracts for raw materials. These deposits are refundable, and the Chinese Customs Department have, to date, returned these funds to the Company. Nevertheless, the Company will continually have to deposit funds with the Chinese Customs Department, which deposits will decrease the amount of cash available to the Company to fund its liquidity needs. Should the Chinese Customs Department delay the release of the remaining deposits, or should new, larger deposits be required, the Company’s liquidity could be negatively affected while its cash is held by the Chinese Customs Department.

 

  10  

 

 

The Global Economic Uncertainty and Weakness Has In the Past Adversely Affected The Company’s Business And Do So Again In the Future. Most of the Company’s customers are international companies that operate globally or serve global markets. The Company’s largest customers serve the European market. As a result, the Company’s customers have in the recent past been affected by the unstable financial and credit markets generally, and in Europe in particular, and by the downturn in many European economies. Although the Company’s principal customers have gradually been increasing the amount of purchases from the Company, a new round of instability of the markets and weakness of the global (and European) economy could adversely affect the future demand for the Company’s customers’ products and the amount and timing of their orders. Fluctuating economic uncertainties are expected to continue to affect the Company’s operations, earnings and financial condition. The instability also affects the prices at which the Company can sell its products, which in turn adversely affects the Company’s earnings and financial condition and its relations with its customers.

 

The Company Is Financially Dependent On A Few Major Customers. During the years ended March 31, 2017 and 2016 the Company’s aggregate sales to its four largest customers accounted for approximately 79.3% and 79.8% of net sales respectively. While the Company believes that there are material benefits to limiting its customer base to a few, large, well-established and financially strong customers, having fewer customers also has significant risks. The Company’s success will depend to a significant extent on maintaining its major customers and on the success achieved by its major customers. The Company could be materially adversely affected if it loses one or more of its major customers or if the business and operations of its existing major customers declines. While the Company has in the past either been able to replace major customers or to increase the amount of orders it receives from its remaining customers, no assurance can be given that the Company will be able to do so in the future. In addition, with few, larger customers, the Company’s operations are more significantly impacted by a delay or reduction of any anticipated purchase orders or by the loss of any one or more of its major customers.

 

In addition to its increasing dependence on generating revenues from fewer, larger customers, the Company’s risk exposure to the collection of its accounts receivable likewise is increasing as the size of receivables from individual clients increases. A substantial portion of the Company’s sales to its major customers are made on credit, which exposes the Company to the risk of significant revenue loss if a major customer is unable to honor its credit obligations to the Company. Any material delay in being paid by its larger customers, or any default by a major customer on its obligations to the Company would significantly and adversely affect the Company’s liquidity. During the fiscal years ended March 31, 2017 and 2016, accounts receivable from the three customers with the largest receivable balances at year-end represented, in the aggregate, 72.9% and 69.2% of the total outstanding receivables, respectively.

 

  11  

 

 

The Company Is Highly Dependent Upon Its Executive Officers And Its Other Managers . The Company is highly dependent upon Roland Kohl, the Company’s Chief Executive Officer, and its other officers and managers. Although the Company has signed employment contracts with Mr. Kohl and many of its other key officers/managers, no assurance can be given that those employees will remain with the Company during the terms of their employment agreements. The loss of the services of any of the foregoing persons would have a material adverse effect on the Company’s business and operations. Mr. Kohl’s new employment agreement expires in March 2019. The Company owns a $2,000,000 life insurance policy issued to insure the Company’s in the event of Mr. Kohl’s death. In addition, the Myanmar operations are highly dependent upon that facilities’ Managing Director (who also is its co-founder). Should the Myanmar co-founder leave, the Myanmar operations could be materially affected, and the Company could have difficulty in finding a replacement.

 

The Company Must Continuously Adapt Its Operations To Suit Its Customers Needs, Or Else It Will Lose Customers. The Company’s customers are continuously changing the mix of their products. Accordingly, the Company must continuously adapt its manufacturing abilities to suit the needs of its customers. No assurance can be given that the Company will be able to detect and correctly react to future changes in the needs of its principal customers, or that its investments in equipment and machinery made in anticipation of such changes will result in a positive return. Should the Company fail to react, or to incorrectly react to changes in the needs of its current or future customers, its business, operations and financial condition could be adversely affected.

 

The Company Faces Significant Competition From Numerous Larger, Better Capitalized, and International Competitors. The Company competes against numerous manufacturers for all of its current products. Such competition arises from both third party manufacturers and from the in–house manufacturing capabilities of existing customers. To a large extent, the Company competes in its OEM business on the basis of quality, price, service, and the ability to deliver products on a reliable basis. Due to significant competition and the availability of alternate OEM suppliers for the Company’s customers, the Company has, at times, been reluctant, or even unable to pass through significant materials cost increases. This has, at times, led to lower gross margins and even to net losses in some product lines. During the past few years, the Company has also lost manufacturing contracts because of its price increases, which losses have resulted in lower net sales. As a result of these factors, the Company will have to continue to operate at narrow gross profit margins, which could jeopardize the Company’s financial position.

 

Since locating its facilities in Shenzhen, China, in 1991, the Company has been able to compete with other manufacturers based on its cost of operations in Shenzhen, the availability of a large labor pool, its favorable tax status, and its convenient access to Hong Kong’s shipping port and business/banking facilities. However, since the Company first moved to Shenzhen as one of the first manufacturers in that locality, many other manufacturers have re-located or established new facilities in Shenzhen, and the Company’s competitive advantage has been significantly diminished. In addition, many of the larger, international companies that have established competing facilities in Shenzhen have also established manufacturing facilities in other low-cost manufacturing locations, many located at sites outside of China, which have given those competitors the ability to shift their manufacturing to those locations whenever costs at those other locations are cheaper than in Shenzhen. Accordingly, the Company has indirectly been competing against both the competitors in Shenzhen as well as the other facilities outside of China. The significantly increases in the cost of operating in China, including changes in labor laws, changes in environmental regulations and in the enforcement of such regulations, increases in safety regulations, and a general increase in the cost of doing business have all collectively eroded many of the advantages of operating in China. No assurance can be given that the Company will continue to be able to compete effectively against companies based in China or, in particular, those operating outside of China.

 

  12  

 

 

Dependence on the Long Hua, Shenzhen, China, Factory Complex . The Company currently operates its sole manufacturing facility in Long Hua, Shenzhen. Although the Company also assembles and manufactures parts and components in its 84%-owned Myanmar subsidiary, the Company currently is, and will continue to be heavily dependent upon its Long Hua, Shenzhen facility. The loss of the Shenzhen facility, or any material disruption of operations at the Shenzhen facility, would be costly, would materially disrupt the Company’s overall operations, and would have a material and adverse impact on the Company’s operations and financial condition. The Company currently maintains fire, casualty and theft insurance aggregating approximately $10 million, covering its stock in trade goods and merchandize, furniture and equipment in China. The scope of the insurance coverage, and the amount of financial coverage provided by this insurance may not be sufficient to cover material damage to, or, the loss of, all or material portions of the factory complex due to fire, severe weather, flood, or other act of God or cause, and such damage or loss would have a material adverse effect on the Company’s financial condition, business and prospects. The Company may not be able to move its principal facilities from its current location in Long Hua without significant cost and expense. For example, if the Company were to permanently re-locate its manufacturing facilities (because it cannot extend its leases or for other reasons) outside of the current locality, under local law the Company would have to terminate all of its employees and pay substantial termination fees and severance. The amount of such employment termination fees could substantially impact the Company’s financial condition.

 

Fluctuation in Foreign Currency Exchange Rates Will Continue to Affect the Company’s Operations and Profitability. Because the Company engages in international trade, the Company is subject to the risks of foreign currency exchange rate fluctuations. The Company’s operations are based in the PRC, Hong Kong and in Myanmar. However, because most the Company’s customers are located outside of these markets (primarily in Europe), the Company makes and/or receives payments in various currencies (including U.S. dollars, Hong Kong dollars, RMB and Euros). As a result, the Company is exposed to the risks associated with possible foreign currency controls, currency exchange rate fluctuations or devaluations. For example, the Company realized currency exchange losses of $19,000, $21,000 and $125,000 in the fiscal years ended March 31, 2017, March 31, 2016 and 2015, respectively. However, these currency fluctuations have in the past been more significant and have, in those prior years, materially affected the Company’s financial results. Notwithstanding these currency conversion rate fluctuations, the Company does not attempt to hedge its currency exchange risks and, therefore, will continue to experience certain gains or losses due to changes in foreign currency exchange rates. The Company does attempt to limit its currency exchange rate exposure in certain of its OEM contracts through contractual provisions, which may limit, though not eliminate, these currency risks. In addition, the Company has an understanding with many of its larger European customers that the Company’s quoted prices will be periodically adjusted to reflect currency exchange rate fluctuations. The Company is also attempting to limit its exposure to currency fluctuations with its non-U.S. based customers by increasingly asking for payment in U.S. dollars. Nevertheless, no assurance can be given that the Company will not suffer future currency exchange rate losses that will materially impact the Company’s financial results and condition.

 

  13  

 

 

Significant Worldwide Political, Economic, Legal And Other Risks Related To International Operations. The Company is incorporated in the British Virgin Islands, has administrative offices for its subsidiaries in Hong Kong, and has all of its manufacturing facilities in China and Myanmar. The Company sells its products to customers in Europe, Hong Kong, North America and elsewhere in Asia. As a result, its operations are subject to significant political and economic risks and legal uncertainties, including changes in international and domestic customs regulations, changes in tariffs, trade restrictions, trade agreements and taxation, changes in economic and political conditions and in governmental policies, difficulties in managing or overseeing foreign operations, and wars, civil unrest, acts of terrorism and other conflicts. The occurrence or consequences of any of these factors may restrict the Company’s ability to operate in the affected region and decrease the profitability of the Company’s operations in that region.

 

Acquisitions Or Strategic Investments, Including The Recent Expansion Into Myanmar (Burma), May Not Be Successful And May Harm The Company’s Operating Results . The Company has in the past, and may in the future, acquire, invest in, or enter into strategic arrangements with other companies in China and elsewhere (including elsewhere in Asia, Europe or even in North or Central America). For example, as part of its strategy to reduce some of its operating expenses, in the past few years the Company acquired an 84% interest in a Myanmar company and a 51% interest in a venture that it co-owns with ACI Group GmbH, a company based in Zimmern, Germany. The German company was established to manufacture a series of lower cost, proprietary CO 2 cleaning systems for industrial and commercial cleaning applications. Such acquisitions or strategic investments could have a material adverse effect on the Company’s business and operating results because of:

 

· The assumption of unknown liabilities, including employee obligations. Although the Company normally conducts extensive legal and accounting due diligence in connection with its acquisitions, there are many liabilities that cannot be discovered, and which liabilities could be material.

 

· The Company could incur significant expenses related to bringing the financial, accounting and internal control procedures of the acquired business into compliance with U.S. GAAP financial accounting standards and the Sarbanes Oxley Act of 2002.

 

· The Company’s operating results could be impaired as a result of restructuring or impairment charges related to amortization expenses associated with intangible assets.

 

· The Company could experience significant difficulties in successfully integrating any acquired operations, technologies, customers’ products and businesses with its operations.

 

  14  

 

 

· Future acquisitions could divert the Company’s capital and management’s attention to other business concerns.

 

· The Company may not be able to hire the key employees necessary to manage or staff the acquired enterprise operations.

 

Risk of Cybersecurity Breaches. Security breaches and other disruptions could compromise the Company’s information and expose the Company to liability, which would cause the Company’s business and reputation to suffer. In the ordinary course of the Company’s business, the Company stores sensitive data, including business information and regarding its customers, suppliers and business partners, in the Company’s networks. The secure maintenance and transmission of this information is critical to the Company’s operations. Despite the Company’s security measures, its information technology and infrastructure may be vulnerable to attacks by hackers or breached due to employee error, malfeasance or other disruptions. Any such breach could compromise the Company’s networks and the information stored there could be accessed, publicly disclosed, lost or stolen. Any such access, disclosure or other loss of information could result in legal claims or proceedings, regulatory penalties, disrupt the Company’s operations, and damage our reputation, which could adversely affect its business, revenues and competitive position.

 

Certain Legal Consequences of Incorporation in the British Virgin Islands . The Company is incorporated under the laws of the British Virgin Islands, and its corporate affairs are governed by its Memorandum of Association and Articles of Association and by the BVI Business Companies Act of the British Virgin Islands. Principles of law relating to such matters as the validity of corporate procedures, the fiduciary duties of the Company’s management, directors and controlling shareholders and the rights of the Company’s shareholders differ from those that would apply if the Company were incorporated in a jurisdiction within the U.S. Further, the rights of shareholders under British Virgin Islands law are not as clearly established as the rights of shareholders under legislation or judicial precedent in existence in most U.S. jurisdictions. Thus, the public shareholders of the Company may have more difficulty in protecting their interests in the face of actions of the management, directors or controlling shareholders than they might have as shareholders of a corporation incorporated in a U.S. jurisdiction. In addition, there is doubt that the courts of the British Virgin Islands would enforce, either in an original action or in an action for enforcement of judgments of U.S. courts, liabilities that are predicated upon the securities laws of the U.S.

 

Anti-Takeover Provisions Of The Company’s Amended Articles Of Association Could Delay Or Prevent A Change Of Control That The Shareholders May Favor . Article 61 of the Company’s Articles of Association was amended in June 2013 to divide the Board of Directors into three classes, with the directors of each class to be elected for staggered three-year terms. In August 2015, the Company’s Articles of Association were amended (i) to increase to 25% the number of shares required to call a special meeting of shareholders, (ii) to provide that shareholders can only act at a meeting (and not by written consent), and (iii) to provide that directors can only be nominated by the current/existing Board, or by shareholders who comply with certain procedures normally applicable to U.S. pubic companies. These changes may have the effect of discouraging, delaying or preventing a merger or other change of control that the shareholders may consider favorable, or may impede the ability of the holders of our common shares to change the Company’s management. In addition, as permitted by the law of the British Virgin Islands and the Company’s Memorandum and Articles of Association, the Memorandum and Articles of Association may be amended by the Board of Directors without shareholder approval provided that a majority of the independent directors do not vote against the amendment. This includes amendments to increase or reduce our authorized capital stock or to create from time to time and issue one or more classes of preference shares (which are analogous to preferred stock of corporations organized in the United States). The Board’s ability to amend the Memorandum and Articles of Association without shareholder approval, including its ability to create and issue preference shares, could have the effect of delaying, deterring or preventing a change in control of the Company, including a tender offer to purchase our common shares at a premium over the then current market price.

 

  15  

 

 

It May be Difficult to Serve the Company with Legal Process or Enforce Judgments Against the Company’s Management or the Company. The Company is a British Virgin Islands holding corporation with subsidiaries in Hong Kong, Myanmar and China. Substantially, all of the Company’s assets are located in the PRC and Myanmar, and no assets, employees or operations are located in the U.S. In addition, most of the Company’s directors and all of its executive officers reside outside of the U.S. It may not be possible to effect service of process within the United States or elsewhere outside the PRC or Hong Kong upon the Company’s directors, or executive officers, including effecting service of process with respect to matters arising under United States federal securities laws or applicable state securities laws. The PRC does not have treaties providing for the reciprocal recognition and enforcement of judgments of courts with the United States and many other countries. As a result, recognition and enforcement in the PRC of judgments of a court in the United States or many other jurisdictions in relation to any matter, including securities laws, may be difficult or impossible.

 

No treaty exists between Hong Kong or the British Virgin Islands and the United States providing for the reciprocal enforcement of foreign judgments. However, the courts of Hong Kong and the British Virgin Islands are generally prepared to accept a foreign judgment as evidence of a debt due. An action may then be commenced in Hong Kong or the British Virgin Islands for recovery of this debt. A Hong Kong or British Virgin Islands court will only accept a foreign judgment as evidence of a debt due if various conditions are met, including the condition that the judgment is for a liquidated amount in a civil matter, the foreign court has taken jurisdiction on grounds that are recognized by the common law rules as to conflict of laws in Hong Kong or the British Virgin Islands, the proceedings in which the judgment was obtained, the judgment itself and the enforcement of the judgment are not contrary to the public policy of Hong Kong or the British Virgin Islands, and the person against whom the judgment is given is subject to the jurisdiction of the Hong Kong or the British Virgin Islands court.

 

Enforcement of a foreign judgment in Hong Kong or the British Virgin Islands may also be limited or affected by applicable bankruptcy, insolvency, liquidation, arrangement and moratorium, or similar laws relating to or affecting creditors’ rights generally, and will be subject to a statutory limitation of time within which proceedings may be brought.

 

Volatility Of Market Price Of the Company’s Shares. The markets for equity securities have been volatile and the price of the Company’s Common Shares has been and could continue to be subject to material fluctuations in response to quarter to quarter variations in operating results, news announcements, trading volume, general market trends both domestically and internationally, currency movements and interest rate fluctuations.

 

  16  

 

 

Exemptions Under The Exchange Act As A Foreign Private Issuer . The Company is a foreign private issuer within the meaning of rules promulgated under the U.S. Securities Exchange Act of 1934 (the “Exchange Act”). As such, and though its Common Shares are registered under Section 12(b) of the Exchange Act, it is exempt from certain provisions of the Exchange Act applicable to United States public companies including: the rules under the Exchange Act requiring the filing with the Commission of quarterly reports on Form 10-Q or current reports on Form 8-K; the sections of the Exchange Act regulating the solicitation of proxies, consents or authorizations with respect to a security registered under the Exchange Act; the sections of the Exchange Act requiring insiders to file public reports of their stock ownership and trading activities and establishing insider liability for profits realized from any “short-swing” trading transaction (i.e., a purchase and sale, or sale and purchase, of the issuer’s equity securities within six months or less), and the provisions of Regulation FD aimed at preventing issuers from making selective disclosures of material information. In addition, certain provisions of the Sarbanes-Oxley Act of 2002 do not apply to the Company. Because of the exemptions under the Exchange Act and Sarbanes-Oxley Act applicable to foreign private issuers, shareholders of the Company are not afforded the same protections or information generally available to investors in public companies organized in the United States.

 

The Audit Report Included In This Annual Report is Prepared By Auditors Who Are Not Inspected By The Public Company Accounting Oversight Board And, As Such, You Are Deprived Of The Benefits Of Such Inspection. Our independent registered public accounting firm that issues the audit reports included in our annual reports filed with the U.S. Securities and Exchange Commission, as auditors of companies that are traded publicly in the United States and a firm registered with the U.S. Public Company Accounting Oversight Board (United States) (the “PCAOB”), is required by the laws of the United States to undergo regular inspections by the PCAOB to assess its compliance with the laws of the United States and professional standards. 

 

Because we have substantial operations within the Peoples' Republic of China and the PCAOB is currently unable to conduct inspections of the work of our auditors as it relates to those operations without the approval of the Chinese authorities, our auditors are not currently inspected fully by the PCAOB.

 

Inspections of other firms that the PCAOB has conducted outside China have identified deficiencies in those firms’ audit procedures and quality control procedures, which may be addressed as part of the inspection process to improve future audit quality. This lack of PCAOB inspections in China prevents the PCAOB from regularly evaluating our auditor's audits and its quality control procedures. As a result, investors may be deprived of the benefits of PCAOB inspections.  

 

The inability of the PCAOB to conduct full inspections of auditors in China makes it more difficult to evaluate the effectiveness of our auditor’s audit procedures or quality control procedures as compared to auditors outside of China that are subject to PCAOB inspections. Investors may lose confidence in our reported financial information and procedures and the quality of our financial statements.

 

  17  

 

 

If additional remedial measures are imposed on the Big Four PRC-based accounting firms, including the Company’s independent registered public accounting firm, in the administrative proceedings brought by the SEC alleging the firms' failure to meet specific criteria set by the SEC with respect to requests for the production of documents, we could be unable to timely file future financial statements in compliance with the requirements of the Exchange Act . Starting in 2011 the Chinese affiliates of the ‘‘big four’’ accounting firms (including the Company’s independent registered public accounting firm) were affected by a conflict between U.S. and Chinese law. Specifically, for certain U.S. listed companies operating and audited in mainland China, the SEC and the PCAOB sought to obtain from the Chinese firms access to their audit work papers and related documents. The firms were, however, advised and directed that under China law they could not respond directly to the U.S. regulators on those requests, and that requests by foreign regulators for access to such papers in China had to be channeled through the China Securities Regulatory Commission, or the CSRC.

 

In late 2012 this impasse led the SEC to commence administrative proceedings under Rule 102(e) of its Rules of Practice and also under the Sarbanes-Oxley Act of 2002 against the Chinese accounting firms (including our independent registered public accounting firm). A first instance trial of the proceedings in July 2013 in the SEC’s internal administrative court resulted in an adverse judgment against the firms. The administrative law judge proposed penalties on the firms including a temporary suspension of their right to practice before the SEC, although that proposed penalty did not take effect pending review by the Commissioners of the SEC. On February 6, 2015, before a review by the Commissioners had taken place, the firms reached a settlement with the SEC. Under the settlement, the SEC accepts that future requests by the SEC for the production of documents will normally be made to the CSRC. The firms will receive matching Section 106 requests, and are required to abide by a detailed set of procedures with respect to such requests, which in substance require them to facilitate production via the CSRC. If they fail to meet specified criteria, the SEC retains authority to impose a variety of additional remedial measures on the firms depending on the nature of the failure. Remedies for any future noncompliance could include, as appropriate, an automatic six-month bar on a single firm’s performance of certain audit work, commencement of a new proceeding against a firm, or in extreme cases the resumption of the current proceeding against all four firms.

 

In the event that the SEC restarts the administrative proceedings, depending upon the final outcome, listed companies in the United States with major PRC operations may find it difficult or impossible to retain auditors in respect of their operations in the PRC, which could result in financial statements being determined to be not in compliance with the requirements of the Exchange Act, including possible delisting. Moreover, any negative news about any such future proceedings against these audit firms may cause investor uncertainty regarding China-based, United States-listed companies and the market price of our common shares may be adversely affected.

 

If our independent registered public accounting firm were denied, even temporarily, the ability to practice before the SEC and we were unable to timely find another registered public accounting firm to audit and issue an opinion on our financial statements, our financial statements could be determined to be not in compliance with the requirements of the Exchange Act of 1934, as amended. Such a determination could ultimately lead to the delisting of our common shares from the Nasdaq Capital Market or deregistration from the SEC, or both, which would substantially reduce or effectively terminate the trading of our common shares in the United States.

 

  18  

 

 

Failure To Establish And Maintain Effective Internal Controls Over Financial Reporting Could Have A Material And Adverse Effect On The Accuracy In Reporting Our Financial Results Or Preventing Fraud . We are subject to the reporting obligations under the U.S. securities laws. The SEC, as required under Section 404 of the Sarbanes-Oxley Act of 2002, has adopted rules requiring public companies to include a report of management on the effectiveness of such companies’ internal control over financial reporting in its annual report. Because of the difficulty in hiring and keeping highly qualified accounting personnel and the high cost of maintaining proper internal controls, management may not be able to conclude that the Company’s internal control over financial reporting is fully effective. These possible outcomes could result in an adverse reaction in the financial marketplace due to a loss of investor confidence in the reliability of our reporting processes, which in turn could harm the Company’s business and negatively impact the trading price of the Company’s common shares. In addition, requirement that the Company maintain effective financial controls and systems applies to the Company’s new majority-owned Myanmar subsidiary. Although the Company has implemented its company-wide financial controls at the Myanmar facility, because of the lack of familiarity with U.S. controls and procedures, language issues and the training of its personnel, no assurance can be given that the Myanmar financial controls will be sufficient to prevent fraud or financial reporting inaccuracies.

 

Concentration of Share Ownership Allows Management to Substantially Influence the Outcome of Matters Requiring Shareholder Approval. As of June 26, 2017, members of the Company’s senior management and Board of Directors collectively beneficially owned approximately 24% of the Company’s outstanding Common Shares. As a result, if they were to act together, they may be able to substantially influence the outcome of all matters requiring approval by the shareholders, including the election of directors and approval of significant corporate transactions. This ability may have the effect of delaying or preventing a change in control of the Company, or causing a change in control of the Company that may not be favored by our other shareholders.

 

While The Company Has In The Past Paid Dividends, No Assurance Can Be Given That The Company Will Declare Or Pay Cash Dividends In The Future. The Company attempts to pay a cash dividend at least once a year to all holders of its Common Shares, subject to its profitability and cash position. The Company made three dividend payments in the year ended March 31, 2017 (a total of $0.30 per share in fiscal 2017) and four dividend payments in the fiscal year ended March 31, 2016 (a total of $0.40 per share in fiscal 2016). In addition, the Company paid a $0.07 per share dividend on April 10, 2017. Dividends are declared and payable at the discretion of the Board of Directors and depend upon, among other things, the Company’s net profit after taxes, the anticipated future earnings of the Company, the success of the Company’s business activities, the Company’s capital requirements, and the general financial conditions of the Company. Although it is the Company’s intention to pay dividends during profitable fiscal years, no assurance can be given that the Company will, in fact, pay any dividends in the future even if its has a profitable year or is otherwise capable of doing so. If the Company does not pay a cash dividend, the Company’s shareholders will not realize a return on their investment in the Common Shares except to the extent of any appreciation in the value of the Common Shares. 

 

  19  

 

 

Item 4.   Information on the Company

 

Highway Holdings Limited is a manufacturing company that produces a wide variety of high-quality products mostly for large, global original equipment manufacturers — from simple parts and components to sub-assemblies and finished products. The Company’s administrative offices are located in Hong Kong, and its manufacturing facilities are located in Shenzhen in the People’s Republic of China. During the fiscal year ended March 31, 2015, the Company purchased a 75% equity interest in Kayser Myanmar Manufacturing Company Ltd. (Kayser Myanmar), a company registered to operate as a foreign company in Myanmar. In 2017, the Company increased its ownership interest in Kayser Myanmar to 84%. Kayser Myanmar currently assembles products for the Company at its product assembly facility in Yangon, Myanmar.

 

History and Development of the Company.

 

Overview . Highway Holdings Limited is a holding corporation that was incorporated on July 20, 1990 as a limited liability International Business Company under the British Virgin Islands International Business Companies Act, 1984 (the (“IBCA”). Effective on January 1, 2007, the British Virgin Islands repealed the IBCA, and simultaneously with such repeal, the Company was automatically re-registered under the BVI Business Companies Act, 2004, BVI’s corporate law that replaced the IBCA. As of the date of this Report, Highway Holdings Limited conducts all of its operations through six wholly-owned or controlled subsidiaries that carry out the Company’s business from Hong Kong, the Company’s principal manufacturing factory in Shenzhen, China, and from its majority-owned facility in Yangon, Myanmar.

 

The Company began its operations in 1990 in Hong Kong as a metal stamping company. In 1991, the Company transferred the metal stamping operations to a factory in Long Hua, Shenzhen, China. From 1991 until the reorganization that commenced in 2011 (see, “Reorganization” below), the Company’s metal stamping and other operations were conducted pursuant to agreements entered into between certain Chinese companies set up by the local government and the Shenzhen City Baoan District Foreign Economic Development Head Company and its designees (collectively, the “BFDC”) (the agreements, collectively the “BFDC Agreements”). Under the BFDC Agreements, the Company’s Long Hua, Shenzhen, operations were provided with both manufacturing facilities and labor by affiliates of local government instrumentalities, for which the Company paid management fees based on a negotiated sum per factory worker, and other charges, as well as rent for the factory complex. Under the BFDC Agreements, the Company’s operations were limited by the terms of those agreements, and the Company could not sell its products in China. As discussed in “Reorganization” below, all BFDC Agreements have been terminated, and the Company now operates in Shenzhen, China, through “Nissin Metal and Plastic (Shenzhen) Company Limited” (herein referred to as “Nissin PRC”), a new wholly-owned subsidiary that is a registered company in the PRC.

 

  20  

 

 

Since its organization in 1990, the Company has primarily been a manufacturer of high quality metal parts for major Japanese and German customers. The Company’s metal stamping capabilities have, however, over the years been supplemented with additional manufacturing and assembly capabilities, such as the ability to manufacture and assemble plastic, electronic and electrical parts, components and complete products. As a result, the Company has evolved from a company that was only engaged in manufacturing simple metal parts to a company that has the capabilities to manufacture and assemble larger complex components, subsystems, subassemblies and even entire products for its clients.

 

In addition to its historical manufacturing operations, the Company continues to explore other possible means of leveraging its manufacturing capabilities in China and to develop proprietary products that the Company can manufacture and sell as its own products. The manufacture and sale of the Company’s own products would supplement the Company’s existing OEM business. The Company believes that developing and selling its own products in Asia would lessen its dependence on third party customers and diversify its operations into a higher margin line of business. As part of its goal to develop a line of proprietary products, in November 2013 the Company formed a jointly owned company with ACI Group GmbH, based in Zimmern, Germany. The purpose of this new company (known as Advanced Cleaning Innovations Asia Limited) is to develop and manufacture a series of lower cost, proprietary CO 2 snow-jet and dry ice cleaning systems for industrial and commercial cleaning applications. The new company’s goal is to market the cleaning systems in Asia and elsewhere. The Company has not completed its development of any of the proposed cleaning systems, and has not commercially introduced any of its proposed products.

 

Reorganization . In 2010 the regional governments announced that the BFDC Agreement form of license arrangement used by the Company and numerous other foreign businesses to operate in China would no longer be permitted. All foreign companies operating in China under this type of subcontract arrangement were required to transfer their licensed China operations in foreign-owned companies organized and registered in China. The Company conducted its operations in Shenzhen, China, through the BFDC Agreements that were entered into by two of its subsidiaries known as (i) Nissin Precision Metal Manufacturing Limited (“Nissin HK”), the manufacturing subsidiary, and (ii) Hi-Lite Camera Company Limited (“Hi-Lite”), the assembly subsidiary. In May 2011 the Company formed Nissin PRC, a new, PRC-registered subsidiary, and transferred the cash, assets, employees and operations of Nissin HK under the BFDC Agreements to Nissin PRC. Hi-Lite did not convert its operations into a PRC-registered company and continued to operate Hi-Lite under the BFDC Agreement until March 2016. During the fiscal year ended March 31, 2016 Hi-Lite transferred its remaining operations to Nissin PRC (the reorganization of Nissin HK and Hi-Lite is herein referred to as the “Reorganization”). Accordingly, all of the Company’s operations in China since the beginning of the fiscal year ended March 31, 2017 have been conducted through its Nissin PRC subsidiary.

 

As a result of the reorganization at the Company’s manufacturing facilities in Shenzhen, China, the Company has also had to increase certain of its administrative functions in Hong Kong. Currently, most of the Company’s non-manufacturing activities (i.e. its administrative functions, marketing, sales, design, engineering, and purchasing) are now being conducted from two offices in Hong Kong, and most of its manufacturing operations are being conducted at either the factory in Long Hua, Shenzhen, China, or the facility in Yangon, Myanmar. To facilitate the operations of the Myanmar company, much of the assembly equipment and some of the component manufacturing equipment has been transferred by the Company from its Shenzhen, China, facility to the Company’s majority-owned subsidiary in Yangon, Myanmar. The Company intends to move more of its component manufacturing operations from Shenzhen to Yangon.

 

  21  

 

 

As part of the Reorganization, the Company transferred the former BFDC licensed operations of Nissin HK to Nissin PRC. (A foreign owned subsidiary such as Nissin PRC that is established in China is commonly known as a foreign invested enterprise, a “FIE”, or as a “Wholly Foreign Owned Enterprise,” or a “WFOE.”) As a new PRC registered company, Nissin PRC is permitted to hire its own employees, lease its own facilities, and distribute its products in China. However, unlike the Company’s prior arrangements under the BFDC Agreements, Nissin PRC will be subject to China’s tax codes and will be subject to the rules and regulations applicable to PRC registered companies.

 

As a result of the Reorganization, the Company is now structured as follow:

 

· The Company’s corporate administrative matters are conducted in the British Virgin Islands through its registered agent: Vistra ( BVI) Limited , Vistra Corporate Services Centre,Wickhams City ll, Road Town, Tortola, British Virgin Islands VG1110.

 

· The Company’s administrative functions, and most of its engineering, design and marketing functions, for its subsidiaries are conducted through the two offices located in Hong Kong at Suite No. 1801, and Suite Nos. 1823-1823A, at Level 18, Landmark North, 39 Lung Sum Avenue, Sheung Shui, New Territories, Hong Kong. The Company may be contacted in Hong Kong at (852) 2344-4248.

 

· The Company’s manufacturing and assembly operations are now being conducted at the Company’s factory complex in Long Hua, Shenzhen, China, through Nissin PRC.

 

· Some of the Company’s assembly and manufacturing operations are, now being conducted in Yangon, Myanmar, through its majority-owned subsidiary, Kayser Myanmar. The Company owns an 84% interest in Kayser Myanmar.

 

Strategic Realignment of Assembly Operations—New Myanmar Assembly Facility

 

The Company originally established its operations in China to take advantage of the low cost of operations in China, including in particular the low cost of labor. However, during the past several years, the overall costs of operating a manufacturing facility in Shenzhen have significantly increased, and the cost advantages of operating in China have significantly decreased. The Company was not always able to pass the increased costs through to the Company’s international customers, some of whom elected to move some of their OEM requirements to other, low labor cost, developing countries. In order to remain competitive with OEMs who operate in low labor cost locations outside of China, the Company has developed a two pronged strategy:

 

a.        In order to increase its production efficiency and reduce costs, the Company has been restructuring its manufacturing methods and, where possible, has been supplementing its manufacturing with automation or semi-automated equipment. As a result, during the past five years the Company has been able to reduce its labor force by almost one-half.

 

  22  

 

 

b.        The Company has been shifting its labor intensive assembly, and recently some of its manufacturing, operations to Yangon, Myanmar (formerly, Burma), a developing country that has started to permit foreign investment in that country. The cost of operating and assembly facility, particularly as a result of the low cost of labor, currently is significantly lower in Myanmar than in Shenzhen, China. Early in 2013, in order to test the feasibility of operating in Myanmar, the Company subcontracted the assembly of one of the Company’s products to a third party supplier in Yangon, Myanmar. Initially, the Company loaned the owners of the Myanmar facility some funds and sold the owners some equipment with which that facility could assemble a line of the Company’s products. This out-sourced assembly operation functioned satisfactorily and at a substantially lower cost, and the Company’s customers were satisfied with the quality and timeliness of the products assembled in Myanmar. Accordingly, in order to take advantage of this cost difference, the Company decided to purchase a 75% interest in the Myanmar company from the two owners of that Company. In June 2014 the Company purchased a 25% ownership interest in the Myanmar company, and then acquired an additional 50% interest in March 2015. As a result, as of March 31, 2015, the Company was a 75% owner of the Myanmar company known as Kayser Myanmar. In January 2017, the Company increased its ownership interest in Kayser Myanmar to 84%. Kayser Myanmar is located in Yangon and operates in an approximately 20,000 sq. ft. facility that it leases from an unaffiliated landlord. The 16% interest in Kayser Myanmar that the Company currently does not own is held by a Myanmar national and a founder of Kayser Myanmar. The Company has invested, and currently intends to continue to invest additional amounts in further equipping, expanding and developing the Kayser Myanmar facility and to comply with the local capital requirements (to date, the Company has invested a total of approximately $629,000 in the Myanmar subsidiary as foreign capital, which capital infusion was approved by the Mynamar government). The Company’s goal is to gradually shift most of its labor intensive product assembly and labor intensive component manufacturing operations from Shenzhen, China, to Myanmar. The Company’s operations in Myanmar are subject to numerous risks associated with operating an assembly facility in an underdeveloped country, and it is uncertain how many of the Company’s customers will permit their products to be assembled in Myanmar. See, “ Risk Factors—The Company Faces Numerous Risks In Its Operations In Myanmar ” and “ Risk Factors—The Company’s Customers May Not Permit Their Products To Be Manufactured In Myanmar, Which Would Negatively Affect The Company’s Plans To Move Much Of Its Assembly Operations To Myanmar.

 

Current Business Overview

 

The Company is a fully integrated manufacturer of high quality metal, plastic, electric and electronic components, subassemblies and finished products for OEMs and contract manufacturers (primarily in Europe, and to a lesser extent, in the United States). During the fiscal year ended March 31, 2017, most of the Company’s manufacturing activities were conducted through its factory complex in Long Hua, Shenzhen, China. During the fiscal year ended March 31, 2017, the Company also conducted much of its product assembly functions (and some manufacturing functions) at a facility in Yangon, Myanmar, that is now 84% owned by the Company.

 

  23  

 

 

The Company currently manufactures and supplies a wide variety of high quality metal, plastic and electric parts, components and products to its OEM clients, which assemblies and components are used by the Company’s customers in the manufacturing of products such as photocopiers, laser printers, print cartridges, electrical connectors, electrical circuits , vacuum cleaners, LED power supplies, stepping motors, pumps for dishwashers, and other washing machine components. As part of its manufacturing operations, the Company assists customers in the design and development of the tooling used in the metal and plastic manufacturing process and provides a broad array of other manufacturing and engineering services. The manufacturing services include metal stamping, screen printing, plastic injection molding, pad printing and electronic assembly services. The electronic assembly services include chip on board assembly, IC-bonding, and SMT automatic components assembly of printed circuit boards. Because it is able to provide these services, the Company eliminates the need to outsource these needed functions, and the Company is better able to assure product quality, control overall manufacturing costs and provide timely product delivery, all of which management believes is essential to maintaining, expanding and increasing the Company’s customer base. The Company believes its success as a supplier to respected multi-national companies is mainly due to: (i) its international management culture which includes German, Canadian, Chinese and Myanmar nationals; (ii) its comparatively low operating costs; (iii) its ability to consistently manufacture the type of high quality products required by the Company’s targeted customers; (iv) its expertise in manufacturing these products in the required quality at a reasonable cost; (v) the breadth of its manufacturing capabilities, and (vi) its engineering design and development capabilities (which it uses to assist its customers to design their products).

 

The Company has continuously tried to strategically align its manufacturing operations with the needs of its major customers to attract new OEM customers and retain its existing customers. For example, the Company is capable of manufacturing and assembling a wide variety of complex products that require metal, plastics and electronics manufacturing capabilities. In order to distinguish itself from the many other smaller manufacturing operations in Shenzhen, the Company manufactures more complex parts, components and entire products that utilize more of the Company’s vertically integrated technologies. Because the Company has the ability to design, manufacture and assemble complete functional assemblies containing metal, plastic and electronics, the Company is able to manufacture complete customized products for its customers.

 

Industry Overview

 

During the past two decades, the third-party contract manufacturing industry has experienced major increases as manufacturers worldwide have increasingly outsourced the manufacture of some or all of their component and/or product requirements to independent manufacturers. The benefits of using contract manufacturers (OEMs) include: access to manufacturers in regions with low labor and overhead cost, reduced time to market, reduced capital investment, improved inventory management, improved purchasing power and improved product quality.

 

  24  

 

 

The Company first commenced its metal stamping operations in China in 1991. At that time, the Company gained a significant cost and logistical advantage over other manufacturers by basing its manufacturing facilities in Long Hua, Shenzhen, China, less than 50 kilometers from Hong Kong. During the past few years, however, many other manufacturers have located their facilities in Shenzhen and in other similar low-cost areas in China and Asia. As a result, the Company now faces significantly more competition as a manufacturer of OEM parts. The Company has responded to the increased competition by restructuring its operations and by trying to move from manufacturing low margin, low-cost individual parts to manufacturing higher margin, more expensive components, subassemblies and even complete units for its customers.

 

Initially, the Company manufactured high-quality metal parts, mostly for Japanese customers. More recently, the Company has been manufacturing high-quality parts and components for European (primarily German) companies. The Company has remained flexible with respect to the types of products that it manufactures as well as location of its customers in order to capitalize on market changes. During the past several years, more than two-thirds of the Company’s revenues are derived from its European customers.

 

The Company’s Strategy

 

The Company’s future growth and profitability depend on its ability to compete as a third party contract manufacturer. The Company’s business strategy and focus is to expand its operations as an integrated OEM manufacturer of metal, plastic and electronic parts, components, subassemblies and competed products for blue chip and international customers. The Company business strategy is to further develop and leverage its multi-disciplinary manufacturing strengths, its cost structure, its logistical advantages, its reputation as a high-quality manufacturer, and its current and former relationships with blue chip European and Japanese customers to further expand its manufacturing operations and product offerings. In addition, the Company is attempting to leverage these advantages by upgrading its equipment and machinery, expanding its manufacturing capabilities, and utilizing its cost and logistical advantages. See, “ Strategic Realignment of Assembly Operations—New Myanmar Assembly Facility, ” above.

 

The following are some of the elements that the Company believes will enable it to compete as a third party manufacturer.

 

Capitalize on, and leverage its manufacturing strength : Unlike many of its manufacturing competitors, primarily those in Shenzhen, China, the Company is a vertically integrated manufacturer that can design, manufacture and assemble complex components and subassemblies. In addition, unlike some of its competitors that are limited to either metal stamping or to electronic and plastics manufacturing, the Company also has the ability to combine metal stamping and electronics and plastics manufacturing. For example, the Company manufactures stepping motors, which utilizes all of the Company’s capabilities, starting with mold and die making for the metal and plastic parts, metal stamping, deep drawing and plastic injection molding, electric coil winding, soldering, and assembling all the parts by using spot welding and riveting technologies. Accordingly, the Company’s strategy is to focus on manufacturing more complex products that utilize the Company’s various manufacturing strengths.

 

  25  

 

 

Upgrading Equipment-Increased Automation . In order to attract major European and Japanese customers and in order to reduce its labor costs and improve quality, the Company has during the past few years continuously upgraded the design and manufacturing equipment at its facilities. In the past few years, the Company made significant investments in automated manufacturing and assembly by increasing the number of automated stations that manufacture or assemble products. The Company has gained valuable experience in the field of automation through its current and prior joint ventures with German companies, and now is able to design and manufacture its own automated production lines. The automated/robot machinery that the Company has installed is used to replace some of the repetitive functions performed by workers. The Company’s goal is to use automation/robotics to reduce it labor costs, improve the consistency and quality of its products, and to increase the quantity of products that it manufactures at its work stations. The automated machinery has reduced the number of workers at the Company’s facilities by more than one half in the past few years. In addition to robotics that replace manual labor, the Company has also invested in machines for use in plastics manufacturing, including Computer Numerical Control (“CNC”) tooling machines, a CNC measurement machine, electronic injection molding machines, new stamping machines, spectrum analyzers, as well as numeric controlled stamping machines.

 

Reduce Its Manufacturing And Assembly Costs . The Company initially established its manufacturing and assembly operations in China to take advantage of China’s low labor costs. Those costs have now risen to a level where the cost of manufacturing and China no longer is competitive with certain underdeveloped nations. Accordingly, in order to be able to continue to provide price competitive products, the Company has now acquired a controlling interest in an assembly facility based in Yangon, Myanmar. The Company’s goal is to transfer much of its labor intensive assembly operations that cannot be economically automated to Myanmar, a country where the labor costs are significantly less than in China. The principal purpose of operating in Myanmar is to reduce the cost of its products and, therefore, offset the increasing costs at its facility in Shenzhen, China. By operating in Myanmar, the Company initially did not intend to either lower the prices that it charges its clients or to increase its gross margins. However, as a condition to permitting some of the Company’s manufacturing to be shifted to Myanmar, the Company has been forced to lower some of the prices of goods assembled in Myanmar, which has strained those operations. The Myanmar operations may also produce two ancillary affects: (i) As a “foreign company” under Myanmar law, Kayser Myanmar is entitled to a tax holiday on profits generated by that subsidiary; and (ii) the taxation and customs union of the European Commission has designated Myanmar as an undeveloped country whose exports are subject to tariff concessions called "preferential tariff quotas". Accordingly, the Company’s European customer that satisfy the commission’s requirements benefit from purchasing products manufactured in Myanmar, which benefits may attract other European customers to move at least a portion of their assembly needs to the Company’s Myanmar facilities.

 

Maintaining customers and increasing market share through financial strength: Many of the Company’s largest customers are global companies that require that their OEM manufacturers have the financial strength to survive during financial and economic downturns. The Company has traditionally maintained a strong balance sheet that has enabled it to continue to supply its customers during economic downturns. The Company’s financial policies enabled it to operate during the worldwide financial crisis that commenced in 2008. Many of the Company’s local competitors were unable to survive during the global economic slow-down.

 

  26  

 

 

Expansion by acquisition, merger, subcontract and other means : The Company continues to believe it has the opportunity to expand its business through acquisitions and through the establishment of additional manufacturing facilities. The Company continues to consider and evaluate possible acquisitions, both in China and elsewhere, to access low cost labor, to gain technology know how, to expand its product offerings, and to increase its customer base. An example of the Company’s expansion strategies is the acquisition of an 84% equity interest in Kayser Myanmar. Although the Company evaluates potential strategic relationships and acquisition targets of a regular basis, the Company has not definitively identified any such other transactions.

 

Maintain production quality : Management believes that maintaining close relations with the Company’s customers is important to the success of the Company’s business. Understanding each customer’s needs and efficiently and quickly addressing its needs is vital to maintaining a competitive advantage. Many of the Company’s customers have built the goodwill associated with their products and tradenames based on a high level of perceived quality. By employing the type of high quality management standards, production standards and quality control standards historically utilized by many leading Japanese and German companies, the Company has been able to satisfy the stringent requirements of its customers. Management believes that the Company’s commitment to high level service, its attention to detail, and the quality of its manufacturing has the effect of providing customers with a sense of confidence and security that their product requirements will be met.

 

The Company conducts most of its manufacturing operations in accordance with typical Japanese and German manufacturing standards, paying particular attention to cleanliness, incoming material control, in process quality control, finished goods quality control and final quality audit. The Company’s factory in China has received and maintained its ISO 9001 quality management system certification and an ISO 14001 environmental management systems certification. The Company’s quality system helps to minimize defects and customer returns and create a higher confidence level among customers.

 

The Company tries to constantly improve its production quality. The recent initiatives consist of an increased use of automation (to consistently produce uniformly high quality products) and to improve the skills of its employees. In an effort to improve the technical skills and performance standards of its lower skilled workers, the Company has implemented day time and evening technical training courses that provide these workers with the technical knowledge and skills to operate more efficiently and at a higher quality level.

 

Operate as a socially responsible company . The Company is committed to being a socially responsible company by operating morally and ethically, by protecting the employees physical and mental well-being, by providing a safe work place, by following the legal employment requirements, by not employing underage persons, and by protect the surrounding environment. The Company’s social responsibility actions are an important criteria in the selection of OEM’s by the Company’s global customers.

 

  27  

 

 

Manufacturing

 

The Company’s manufacturing business consists of various stages: (i) tooling design and production; (ii) manufacturing parts made by metal stamping and plastic injection molding; (iii) mechanical and/or electric/electronic assemblies, and (iv) finishing, packaging and shipping.

 

Tooling design and production : The metal manufacturing process generally begins when a customer has completed the design of a new product and contacts the Company to supply certain metal and plastic components to be used in the product. Generally, the Company must design and fabricate the tooling necessary to manufacture these components in its tooling workshop. In some instances, however, the customer already possesses the tooling necessary to manufacture the metal component and simply delivers the tools to the Company. Customers will sometimes also pay the Company to purchase and install the equipment necessary to manufacture the customer’s products. The Company uses various computer controlled manufacturing equipment to efficiently produce high quality tools designed to produce a high quality product. Many of the metal parts manufactured by the Company make use of progressive, multi-stage stamping techniques. In order to conduct and maintain this fully automated stamping method, tools and machines must be precisely fine-tuned and aligned to achieve the required quality standard and maximum efficiency.

 

The tool making process for metal parts generally takes between 14 to 50 working days depending on the size and complexity of the tool. Customers typically bear the cost of producing the tools and, as is customary in the industry, the customers hold title to the tooling. However, the Company maintains and stores the tools at its factory for use in production and the Company usually does not make tooling for customers unless they permit the Company to store the tools on site and manufacture the related parts.

 

The Company also makes highly sophisticated plastic injection molds based on its customers’ orders and requirements in a manner similar to the Company’s metal tool manufacturing process.

 

The Company maintains its ISO 9001 quality management system certification and its ISO 14001 environmental management systems certification.

 

Metal Stamping; Plastic Injection Molding : Following the completion of the tooling, the materials required for the specific product is selected and purchased. See “Raw Material, Components Parts and Suppliers.” Often the customer specifies the materials to be used as well as the supplier. The completed tooling is fitted to the press which is selected for its size and pressing force.

 

Using separate shifts, part stamping and plastic molding can be conducted 24 hours a day, seven days per week other than during normal down time periods required for maintenance and changing of tools and during the traditional Chinese public holidays. Due to the strict quality requirements of customers, each tool and machine, and each product produced by the tools/machines, are subject to stringent in-process quality controls.

 

Electronic Assembly : The Company’s electronic assembly manufacturing consists of chip on board assembly, IC-bonding and SMT technology.

 

  28  

 

 

Finishing, Packaging and Shipping : After their manufacture, the parts and components are inspected for defects and checked with custom-built test gauges. Some components are then painted either at the Company’s Myanmar facilities or by specially trained, third party spray-paint facilities. After being painted, the parts are baked at high temperatures in drying ovens before final inspection and packaging. Some parts are also screen printed by the Company. Each of the parts, assemblies and products is then inspected, packaged to the customer’s specific requirement and delivered to the final quality audit department for final quality inspection which is conducted on a random sample basis. Depending on its agreement with its customers, the Company may ship the parts, assemblies and products it has manufactured by truck directly from its factory to the customer’s factory in China or elsewhere through the port of Shenzhen and/or Hong Kong. Alternatively, the customer may pick up the products at the Company’s factory and arrange for its own shipping.

 

Raw Material, Component Parts and Suppliers

 

The primary raw materials used by the Company to manufacture its metal stamped parts are various types of steel including pre-painted steel sheet, electrolytic zinc plated steel sheet, PVC laminated steel sheet, stainless steel, and cold roll steel sheet. The Company selects suppliers based on the price they charge and the quality and availability of their materials. Many of the Company’s suppliers of steel operate through Hong Kong or China-based companies which deliver the materials directly to the site of the Company’s operations in China.

 

During the past few years, the price of metal and plastics raw materials has fluctuated significantly, and at times there have been shortages for some materials.

 

The parts, components and products manufactured by the Company may include various plastic injected and metal stamped components, as well as integrated circuits, electronic components and paper packaging products. The Company manufactures many of these products, but also purchases components that it uses in its products. These materials are subject to price fluctuations, and the Company has, at times, been materially adversely affected by price increases or shortages of supply.

 

Transportation

 

Most of the sales agreements entered into by the Company are either F.O.B. agreements or Ex-factory agreement (in which the Company makes the goods available at its premises) or F.C.A. agreements (in which the Company hands over the goods, cleared for export, into the custody of the first carrier).

 

Improved roads and highways in China have facilitated intra-China transportation, and the Hong Kong and China customs departments have opened additional border crossings, extended their operating hours, and generally have improved the flow of cross-border goods. The Company’s facilities in Long Hua, Shenzhen, China, are located near both Hong Kong and the seaport in Shenzhen. Many of the Company’s customers use the Shenzhen seaport rather than the port of Hong Kong.

 

  29  

 

 

Customers and Marketing

 

The Company’s sales are generated from customers primarily located in Hong Kong/China, Europe, the United States/Mexico, and other Asian countries. Net sales to customers by geographic area are determined by reference to the physical locations of the Company’s customers. For example, if the products are delivered to a customer in China or Hong Kong, the sales are recorded as generated in Hong Kong and China; if the customer directs the Company to ship its products to Europe, the sales are recorded as sold in Europe. Most of the Company’s recent payments have been in U.S. dollars, although the Company still receives payment in both Hong Kong dollars and Euros. Net sales as a percentage of net sales to customers by geographic area consisted of the following for the years ended March 31, 2015, 2016 and 2017:

 

    Year Ended March 31  
Geographic Areas:   2015     2016     2017  
Hong Kong and China     21.0 %     24.7 %     24.0 %
Europe     67.7 %     71.2 %     71.6 %
Other Asian countries     7.8 %     0.6 %     0.2 %
North America     3.5 %     3.5 %     4.2 %

 

The Company currently has two business and reporting segments of the Company consisting of (i) its metal stamping and mechanical OEM operations, and (ii) its electric OEM operations (that include its plastic operations). The sales by segments for the years ended March 31, 2015, 2016 and 2017 are as follows:

 

    Year Ended March 31  
Segment Sales:   2015     2016     2017  
Metal Stamping and Mechanical OEM     56.0 %     44.8 %     42.4 %
Electric OEM     44.0 %     55.2 %     57.6 %

 

Most of the Company’s customers for its components and subassemblies generally are themselves manufacturers. The Company’s products are sold primarily to European owned companies to be used in finished goods produced by customers at their own manufacturing facilities in China and Europe. However, the Company also has in the past produced finished products, such as light fixtures, that it sold to its customers.

 

The Company markets its services through existing contacts, word-of-mouth referrals and references from associated or related companies of the customers, as well as attendance at some trade shows. During the past few years, the Company has employed a number of foreign sales persons to complement the activities of its officers and in-house sales personnel. The Company has, from time to time, commissioned sales agents in Mexico, U.S. and Germany. These sales agents typically receive an expense allowance and an on-going commission for sales made by the Company to customers introduced by the agents. Due to the international nature of senior management, the Company believes that it has been able to bridge the cultural, language and quality perception gaps that concern certain German companies when dealing in China.

 

  30  

 

 

Major Customers

 

For the fiscal year ended March 31, 2017, the Company had four customer who each accounted for more than 10% of the Company’s net sales. These four customers collectively accounted for 79.3% of the Company’s net sales. During the past few years, the Company has relied to a large extent on a few larger customers and has consciously reduced the number of its smaller customers. The Company’s larger customers have, in general, accepted price increases that the Company has passed through to its customers because of the increasing cost of operating in China, but a few of the Company’s larger customers have in the past few years ceased using the Company’s services because of the price increases. The loss of low margin customers has reduced the Company’s revenues but has increased the Company’s gross margins. However, additional losses of major customers, or any substantial decrease in orders from these customers, could materially and adversely affect the Company’s results of operations and financial position, particularly if the Company is unable to replace such major customers.

 

Customers place manufacturing orders with the Company in the form of purchase orders which are usually supported by a delivery schedule covering one to two months of orders. Customers provide long term forecasts for their anticipated purchases, but are usually able to cancel or amend their forecasted orders at any time without penalty. Certain of the Company’s larger customers provide the Company with non-binding forecasts of their anticipated needs for the next year in order to enable the Company to plan for the anticipated orders. Orders from such customers are thereafter received from time to time based on the customers’ needs, not necessarily on the forecasted amounts or at the projected time periods. Accordingly, backlog has not been meaningful to the Company’s business.

 

In order to be able to timely fill the anticipated orders from its larger customers, the Company may purchase raw materials and other products based on the non-binding forecasts. Since the customer’s order forecasts are not binding orders, if a customer does not place as many orders as anticipated, the Company may not be able to fully utilize the raw materials and other products that the Company has purchased. In that case, the Company may not be able to utilize the raw materials and could suffer a financial loss.

 

Sales of manufactured products to established existing clients are primarily on credit terms between 30-75 days, while the sale to new or lesser known customers are completed on a wire transfer payment basis before shipment or other similar payment terms. Management continuously communicates with its credit sale customers and closely monitors the status of payment in an effort to keep its default rate low. However, as a result of the concentration of sales among a few of the Company’s larger customers, the Company is required to bear significant credit risk with respect to these customers. Parts are generally shipped 14-90 days after an order has been placed unless the Company is required to manufacture new tools which require an additional approximately 14-50 days to complete prior to commencing manufacturing. While the Company has not experienced material difficulty in securing payment from its major customers, there can be no assurance that the Company’s favorable collection experience will continue. The Company could be adversely affected if a major customer was unable to pay for the Company’s products or services.

 

  31  

 

 

Industrial Property Rights

 

As a manufacturer of parts, components and finished products for other manufacturers, the Company has no industrial property rights, such as patents, licenses, franchises, concessions or royalty agreements, which it considers material to its OEM manufacturing business. Instead, the Company relies on its industry expertise, knowledge of niche products, and strong long-term relationships with its customers.

 

Competition

 

The Company competes against numerous OEMs, including both smaller local companies as well as large international companies. Although the Company operates in the same market as some of the world’s largest contract manufacturers (for example, FoxConn operates a major manufacturing facility in Long Hua, Shenzhen), management believes that it principally competes with smaller firms that make up the largest segment of the contract and parts manufacturing industry in China. As a result of the economic downturn that started in 2008, a number of these smaller competitors, including many located in Shenzhen, have ceased operations. However, since some of the Company’s customers are large international enterprises that source their products from many international sources, the Company also competes against contract manufacturing companies in other low cost manufacturing countries. As a vertically integrated, multi-disciplinary manufacturer of complex components and products, the Company also competes against numerous global OEM manufacturers, whether those other manufacturers are located in Shenzhen, China or elsewhere. Most of the international competitors of the Company have substantially greater manufacturing, financial and marketing resources than the Company. The Company believes that the significant competitive factors are quality, price, service, and the ability to deliver products on a reliable basis. The Company believes that it is able to compete in its segment of the OEM manufacturing market by providing high quality products at a competitive price with reliable delivery and service. In addition, since the Company’s main manufacturing facilities are located in the Shenzhen area, near some of its customers, the Company has a competitive advantage by being able to reduce delivery times and transportation costs for these customers, and by being able to offer “just in time” supply services.

 

Seasonality

 

The first calendar quarter (the last quarter of the Company’s March 31 fiscal year) is typically the Company’s lowest sales period because, as is customary in China, the Company’s manufacturing facilities in China are usually closed for one to two weeks for the Chinese New Year holidays. In addition, during the one month before and the one month after the New Year holidays, the Company normally experiences labor shortages, which further impact the operations during this period. As the Myanmar operations become larger, the Company will also be negatively affected by the holidays that all Myanmar employees take annually during that country’s new year’s celebration (typically two weeks in April). The absence of workers during these nationally mandated holidays has not, to date, materially affected the Company’s overall operations, but the holidays are expected to impact the Company in the future as the Myanmar operations increase. The Company does not experience any other significant seasonal fluctuations, nor does it consider any other issues with respect to seasonality to be material.

 

  32  

 

 

Government Regulation

 

As of the date of this Annual Report, the Company’s main manufacturing and assembly facility is located in Shenzhen, China. As a result, the Company’s operations and assets are subject to significant political, economic, legal and other uncertainties associated with doing business in China in general, and in Shenzhen, in particular. Since March 2015, the Company has owned an interest in a Myanmar company that operates a factory in Myanmar. As a result, the Company also is subject to the political, economic, legal and other uncertainties associated with doing business in Myanmar. Myanmar commenced reforming its political and economic policies during the past few years, and the effects of those reforms are still uncertain and evolving.

 

The Chinese government has during the past few years significantly changed and/or increased the enforcement of a number of laws affecting employees (including regulations regarding their salaries and benefits, labor unions, working conditions and overtime restrictions, and contract duration—in particular, requirements regarding pensions, housing and life-long employment), and safety regulations for buildings and workers. The Chinese governmental authorities are increasingly formalizing workers’ rights concerning overtime hours, pensions, layoffs, employment contracts and the role of trade unions. Employers found to be violating these labor rules are often severely penalized. As a result, the Company has had to reduce the number of hours of overtime its workers can work, substantially increase salaries of its workers, provide additional benefits to its workers, and revise certain other of its labor practices. The Shenzhen municipal government recently also issued the Interim Measures on the Administration of Housing Funds that require all local businesses to make contributions to a housing fund, which contributions range from 5% to 20% of an employee’s salary.

 

These increases in labor costs have increased the Company’s operating costs, which increase the Company has attempted to, but has not always been able to pass through to its customers. In addition, employees who have had two consecutive fixed-term contracts must be given an “open-ended employment contract” that, in effect, constitutes a lifetime, permanent contract, which is terminable only in the event the employee materially breaches the Company’s rules and regulations or is in serious dereliction of his duty. Such non-cancelable employment contracts will substantially increase its employment related risks and may limit the Company’s ability to downsize its workforce. In addition, if an employee with such a contract is terminated, the Company is required to pay the terminated employee a substantial severance payment. The Company currently has some employees who are entitled to these lifetime employees, and others will become lifetime employees as they continue their service with the Company. These contingent employment liabilities will increase over time. The Company also is obligated to make future payments under pension and housing plans upon the termination of certain employees. These contingent employee liabilities could become a material financial liability to the Company if a larger number of employees are terminated by the Company all at once (such as upon a plant closure). While the Company has to date absorbed these employee termination liabilities, a sudden simultaneous termination of a large number of employees would require the Company to make significant payments to the terminated employees, which payments could materially and adversely affect the Company’s financial condition.

 

  33  

 

 

Since establishing its operations in China in 1991, the Company has operated its main manufacturing facility in Long Hua, Shenzhen, pursuant to the BFDC Agreements that largely exempted the Company’s operations in Long Hua, Shenzhen, from many of the rules and regulations that were imposed on entities that were considered under China law to be doing business in China as wholly owned subsidiaries organized in China. As a result, the Company was not required to apply for permits or licenses in China or to register to do business in China. As part of the Reorganization, the Company had to discontinue its operations under the BFDC Agreements and, as of April 2015, all of its operations in the PRC are now through a wholly-owned subsidiary that is registered in China as a limited liability company. As a result, the Company’s operations in China are now subject to all of the rules and regulations that previously did not apply to its operations in the PRC. Although the Company believes that it has structured its new operations in the PRC to substantially comply with the governmental regulations that are applicable to its new corporate structure, the exact scope, effect and impact of these government regulations on the Company’s wholly-owned Chinese subsidiary, and therefore on its assets and operations, are still unknown.

 

The Chinese government continues to increase the enforcement of certain environment protection laws, which are restricting some common practices and/or increasing the Company’s cost of operations. In addition to enhanced governmental environmental regulations, the Company also has to comply with environmental laws applicable to its customers, such as recently adopted regulations of the European Union and Japan known as the Restriction on Hazardous Substances (known as “RoHS”) and the European Union’s Regulation for Registration, Evaluation, Authorization and Restriction of Chemicals (known as “REACH”). The RoHS and REACH rules and regulations prohibit the importation products and parts that contain certain levels of toxic materials (such as lead, cadmium and mercury) and chemicals that may pose health and environmental risks. The Company believes that its operations are RoHS and REACH compliant.

 

The Company sells its products to customers in Hong Kong/China, Europe, and the United States/Mexico. As a result, its operations are subject to significant regulations related to its activities in these regions, including changes in international and domestic customs regulations, changes in tariffs, trade restrictions, and trade agreements and taxation.

 

Research and Development

 

As a manufacturer of parts and components for use in other products, the Company conducts no material research or development. The Company does, however, invest minor amounts for certain research and development activities it conducts in connection with (i) developing potential proprietary products, (ii) automated machines that the Company uses in its manufacturing process, and (iii) an understanding of the technologies of its customers. The Company also has incurred some research and development expenses in connection with the development of a series of lower cost, proprietary CO 2 cleaning systems for industrial and commercial cleaning applications that it intends to release as its own proprietary product.

 

  34  

 

 

Organizational Structure/Offices and Manufacturing Facilities

 

Highway Holdings Limited is a holding company that operates through its subsidiaries. As of June 26, 2017, Highway Holdings Limited had various wholly-owned subsidiaries, of which some are dormant or being deactivated, and two majority-owned subsidiaries. The Company currently conducts its business primarily through four wholly-owned subsidiaries and its majority owned Myanmar subsidiary. The Company currently also is developing proprietary CO 2 snow-jet and dry ice cleaning systems through another majority-owned subsidiary. Details of the Company’s four principal wholly-owned operating subsidiaries and their principal activities as of June 26, 2017 are as follows:

 

Place of
incorporation
  Name of entity   Date of
incorporation
  Principal activities
             
Hong Kong   Kayser Limited   August 24, 1995   Trading of OEM products and procurement
             
Hong Kong   Nissin Precision Metal Manufacturing Limited   November 21, 1980   Trading and procurement
             
Hong Kong   Golden Bright Plastic Manufacturing Company Limited   May 19, 1992   Trading company, involved in trading plastic injection products
             
China   Nissin Metal and Plastic (Shenzhen) Company Limited   May 18, 2011   Manufacturing and assembling metal, plastics, mould and electronic products, and automation equipment

 

During the fiscal year ended March 31, 2014, the Company formed a Hong Kong subsidiary (Advanced Cleaning Innovations Asia Limited) that it co-owns with ACI Group GmbH, based in Zimmern, Germany, to manufacture a series of lower cost, proprietary CO 2 snow-jet and dry ice cleaning systems for industrial and commercial cleaning applications in use in Asia. The Company owns a 51% interest in Advanced Cleaning Innovations Asia Limited. This entity operates from the Company’s facilities in Shenzhen and has been designing and developing a prototype product and has not engaged in any material operations to date.

 

In March 2015, the Company completed its acquisition of a 75% interest in Kayser Myanmar Manufacturing Company Limited, a company formed on March 16, 2012 under the laws of Myanmar. In January 2017, the Company increased its ownership interest in this entity to 84%. Kayser Myanmar currently operates as a foreign company under Myanmar law that is authorized to operate in Myanmar. A Myanmar citizen owns 16% of the Kayser Myanmar and is the general manager of the entity. Kayser Myanmar currently assembles products manufactured by the Company in China. The Company is the exclusive supplier of Kayser Myanmar, and the Company’s Kayser Ltd. (Hong Kong) subsidiary is Kayser Myanmar’s sole customer.

 

British Virgin Islands/Corporate Administrative Office

 

The office of the registered agent of the Company is located at Wickhams Cay II, Road Town, Tortola, VG1110 British Virgin Islands. Only corporate administrative matters are conducted at these offices, through the Company’s registered agent, Vistra ( BVI) Limited , Vistra Corporate Services. The Company does not own or lease any property in the British Virgin Islands.

 

  35  

 

 

Hong Kong/Operating Administrative Offices

 

The Company leases Suite 1801, and Suites 1823-1823A, Level 18, Landmark North, 39 Lung Sum Avenue, Sheung Shui, New Territories, Hong Kong as its administrative and engineering offices. The Company’s offices at the Suite 1801 location (consisting of approximately 2,000 sq. ft.) are leased by Nissin Precision Metal Manufacturing Limited and are utilized primarily for engineering, import/export and marketing, while the offices located at Suite 1823-1823A (consisting of approximately 2,100 sq. ft.) are leased by Kayser Limited and are used for finance, purchasing and marketing. Both of these offices are leased under leases that expire on March 20, 2020. The aggregate monthly rental cost of these offices is currently is approximately $10,000 per month (based on the exchange rate in affect as of the date of this Annual Report).

 

Shenzhen, China/Manufacturing Facility

 

The Company leases a total of approximately 245,000 square feet of space at a factory complex located at Long Hua, Shenzhen, China from the Shenzhen Long & Cheng Industry & Trade Industrial Co., Ltd. pursuant to various related leases. The leased space consists of 210,000 square feet of manufacturing space, with the balance representing dormitories for the Company’s factory workers. The leased space is used predominately for the Company’s metal and electrical manufacturing, OEM product assembly, plastic injection, tooling workshop and warehouse operations. There also are offices for production management, production engineering, and production support administration on the premises. The leases for these facility expire in February 2020. During the fiscal year ended March 31, 2017, the landlord of the Shenzhen facility build a new building for the Company in which the Company now operates its metal stamping business. As of the end of the fiscal year ended March 31, 2017, the Company did not fully utilize all of its manufacturing facilities. Accordingly, the newly leased facilities are expected to satisfy the Company’s space needs in the near future.

 

Yangon, Myanmar/Manufacturing Facility

 

Kayser Myanmar currently leases a 20,000 square foot manufacturing and assembly facility in Yangon, Myanmar. The lease for this facility will expire in December 2018.

 

4.A. Unresolved Staff Comments

 

Not applicable.

 

Item 5.   Operating and Financial Review and Prospects

 

Overview

 

The Company’s net sales during the past three years were derived primarily from the manufacture and sale of metal, plastic and electronic parts and components for its international clients. Although the Company manufactures metal, plastic and electronic parts and products for its customers, it treats its (i) metal stamping and mechanical OEM manufacturing operations, and its (ii) electric OEM manufacturing operations, as two separate business segments.

 

  36  

 

 

As described in this Annual Report, the Company has taken various actions to reduce its operating costs, including in particular steps to reduce its labor costs. During the past several years, increased wages, high employee turn-over rates, sign-up bonuses, retention bonuses, overtime payments, and contributions to the new housing fund and other benefit payments have resulted in high labor and staffing costs. In addition, the local government’s proclamation that all subcontract license companies had to convert their operations to a WFOE form of ownership, has further raised the cost of operating in China. As a PRC registered company, the Company’s China subsidiary now has to comply with the more burdensome permitting requirements, has to increase its record keeping functions, and has to pay VAT (which taxes, net of tax credits, adds to the cost of the materials). The combination of the high labor costs and the costs and administrative burdens of operating as a PRC registered company have, to a large extent, eroded one of the principal benefits of manufacturing in China, and have a negative impact on the Company’s competitiveness. As a result of the labor costs and the other burdens imposed on the Company’s PRC operations, the Company is attempting to shift some of its labor intensive operations from Shenzhen, China, to Myanmar, a lower cost neighboring country.

 

Under the BFDC Agreements that used to apply to all of the Company’s operations in Shenzhen, the Company did not pay taxes in China based on the operations of the Shenzhen facilities because the Company’s two China-based companies were not considered to be tax residents in China (the BFDC was responsible for paying its own taxes incurred as a result of the operations under the BFDC Agreements, which taxes were indirectly passed through to the Company’s subsidiaries). However, these BFDC arrangements have now been terminated, and the Company’s two China-based subsidiaries have transferred their assets and operations to Nissin PRC, a wholly-owned subsidiary that is a WFOE. Accordingly, its operations in in China the fiscal year ended March 31, 2017 were (and all future operations by the Company in China will be) operated through its WFOE, which is subject to the uniform income tax rate of 25% in China.

 

The Company is not taxed in the British Virgin Islands, the state of its incorporation.

 

The location of the Company’s administrative offices for its operating subsidiaries in Hong Kong enables the Company to pay low rates of income tax due to Hong Kong’s tax structure. The Company’s income arising from its Hong Kong operations or derived from its operations within Hong Kong is subject to Hong Kong Profits Tax. Previously, while the Company operated under the BFDC Agreements, the Company had the ability to claim a 50% tax benefit from the Hong Kong Inland Revenue Department by providing support for its position that more than half of its income is derived from its activities outside of Hong Kong. Also, under the BFDC Agreements, the Company did not have to pay taxes in China. As a result of the conversion of Nissin Metal and Plastic (Shenzhen) Company Limited into a WFOE as part of the Reorganization, the foregoing Hong Kong tax benefit is no longer available to the Company. The statutory tax rate in Hong Kong currently is 16.5%, and there are no taxes on dividends or capital gains.

 

Commencing in the fiscal year ending March 31 2016, Kayser Myanmar, the Company’s majority-owned Myanmar subsidiary, has been subject to the tax provisions applicable as a result of its operations in Myanmar. However, under Myanmar’s Foreign Investment Law, Kayser Myanmar is exempt from Myanmar income tax until December 20, 2017. In addition, Kayser Myanmar also has a temporary exemption from customs duties and internal taxes on machinery and equipment and on certain imported raw materials used in the Myanmar operations, as well as relief from commercial taxes on goods produced for export. As a result, the tax impact of the Kayser Myanmar operations has not been material and is not anticipated to be material for most of the current fiscal year.

 

  37  

 

 

The Company is not subject to U.S. taxes.

 

The Company owned at least a 75% ownership interest in Kayser Myanmar during the fiscal year ended March 2017 (which interest was increased to an 84% interest in January 2017). Accordingly, the operations of Kayser Myanmar are included in the Company’s consolidated financial statements (and in the below discussion of the Results of Operations) for the fiscal year ended March 31, 2017.

 

Net sales to customers by geographic area are generally determined by the physical locations of the customers. For example, if a customer is based in the U.S., the sale is recorded as a sale to the U.S.

 

Results of Operations

 

General

 

During the past three years discussed below, the Company’s revenues were derived primarily from the manufacture and sale of OEM manufacture of metal, plastic and electronic products, parts and components. During the fiscal year ended March 31, 2017, net sales decreased by 15% from the fiscal year ended March 31, 2016, and net income decreased during that same period by 58%. For the fiscal year ended March 31, 2017, the Company paid dividends of $0.30 per share, compared to $0.40 per share in the prior fiscal year.

 

The following table sets forth the percentages of net sales of certain income and expense items of the Company for each of the three most recent fiscal years.

 

    Year Ended March 31,  
    2015     2016     2017  
                   
Net Sales     100 %     100 %     100 %
Cost of sales     74.4       74.2       71.6  
Gross profit     25.6       25.8       28.4  
Operating income     5.7       6.6       3.9  
Income before income taxes     5.7       6.6       3.9  
Income taxes     (0.6 )     (1.1 )     (1.2 )
Net Income     5.1       5.5       2.7  
Income attributable to non-controlling interest     0.0       0.0       0.0  
Net income attributable to Highway Holdings Shareholders     5.1       5.5       2.7  

 

  38  

 

 

 

Year Ended March 31, 2017 Compared to Year Ended March 31, 2016

 

Net sales for the fiscal year ended March 31, 2017 (“fiscal 2017”) decreased by $3,332,000, or 14.5% from the fiscal year ended March 31, 2016 (“fiscal 2016”) as a result of lower sales to certain European customers, the disruption in its manufacturing activities caused by both the relocation of the Company’s metal stamping operations from a temporary building to a newly constructed building in Shenzhen, China, and the relocation of other assembly and manufacturing operations for China to the Company’s facility in Yangon, Myanmar. The lower sales to certain European customers is due, in large part, to the increasing cost of manufacturing in China. Overall, net sales by region remained relatively unchanged, with net sales to Europe increasing to 71.6% in fiscal 2017 compared to 71.2% of the Company’s net sales in fiscal 2016, and net sales to Hong Kong/China decreasing in fiscal 2017 to 24.0% compared to 24.7% in fiscal 2016.

 

The Company operates in two segments that it refers to as (i) the “metal stamping and mechanical OEM” segment and (ii) the “electric OEM” segment. The metal stamping and mechanical OEM segment focuses on the manufacture and sale of metal parts and components, whereas the electric OEM segment focuses on the manufacture and sale of plastic and electronic parts, components and machines. For fiscal 2017, net sales of the metal stamping and mechanical segment decreased to 42.4% of the Company’s net sales from 44.8% in fiscal 2016 due slight changes in the product mix. Net sales of the electric OEM segment (that also includes plastic parts) increased to 57.6% of net sales in fiscal 2017 from 55.2% in fiscal 2016.

 

Gross profits as a percentage of net sales slightly improved to 28.4% in fiscal 2017 from 25.8% in fiscal 2016 due to the departure of a lower margin customer. Increases in wages and other labor related expenses were offset by a slight decrease in the number of workers (through the use of automation) and by shifting some assembly work to Myanmar. Despite the higher gross margins, gross profits decreased by $358,000 in fiscal 2017 compared to fiscal 2016 due to the 14.5% decrease in net sales.

 

Selling, general and administrative expenses increased by $397,000 (or 9%) in fiscal 2017 compared to fiscal 2016 as a result of increased sales and marketing expenses, the additional administrative expenses of the Myanmar subsidiary, and the costs of relocating the metal stamping operations from the temporary facilities to the new building in Shenzhen. Selling, general and administrative expense as a percentage of net sales increased to 24.5% in fiscal 2017 from 19% in fiscal 2016 as a result of both the increase in expenses and the decrease in net sales.

 

As a result of the $358,000 decrease in gross profits in fiscal 2017 compared to fiscal 2017 and the $397,000 increase in selling, general and administrative expenses, the Company’s operating income decreased by $755,000, or 49.8%, in fiscal 2017.

 

In fiscal 2017 and 2016, the Company had currency exchange rate losses of $19,000 and $21,000, respectively, due to the fluctuations in the value of the RMB and Euro compared to the U.S. dollar. The Company will continue to be exposed to fluctuations in the exchange rate of the RMB and the Euro. The Company does not undertake any currency hedging transactions, and therefore its financial results will continue to be affected by the future fluctuations of currencies.

 

  39  

 

 

The Company incurred income taxes of $236,000 in fiscal 2017 compared to income taxes of $243,000 in fiscal 2016. The Hong Kong statutory profits tax remained unchanged at 16.5% in fiscal 2017. However, the Company’s effective tax rate was 31% in fiscal 2017 compared to 16% in fiscal 2016 because of variances in certain non-deductible items.

 

The Company’s net income in fiscal 2017 decreased to $527,000 from $1,251,000 in fiscal 2016 because of the decrease in net sales, the increase in selling, general and administrative expenses, and the higher effective tax rate.

 

Year Ended March 31, 2016 Compared to Year Ended March 31, 2015

 

Net sales for fiscal 2016 increased by $562,000, or 2.5% from the fiscal year ended March 31, 2015 (“fiscal 2015”) as a result of increased orders from several of the Company’s principal European customers, and the Company’s ability to replace an established customer that terminated its relationship with the Company after the Company announced that it was further increasing its prices in response to the continuing increase in labor and related costs in China. Overall, the Company was able to retain its principal customers despite the continuing increase in operating costs in China because the Company was able to lower some of its assembly costs by shifting some of its assembly operations to its Myanmar subsidiary. Completing some assembly work at the Company’s Yangon, Myanmar, subsidiary is substantially cheaper, even factoring in the additional costs associated with transferring products and materials between the Company’s Shenzhen, China, and Yangon, Myanmar, facilities. During fiscal 2016, net sales to Europe increased to 71.2% of the Company’s net sales in fiscal 2016, compared to 67.7% in fiscal 2015.

 

For fiscal 2016, net sales of the metal stamping and mechanical segment decreased to 44.8% of the Company’s net sales from 56% in fiscal 2015 due to the loss of a major customer. However, net sales of the electric OEM segment (that also includes plastic parts) increased to 55.2% of net sales in fiscal 2016 from 44% in fiscal 2015 due to increased sales of existing customers.

 

Gross profits as a percentage of net sales slightly improved to 25.8% in fiscal 2016 from 25.6% in fiscal 2015. Increases in wages and other labor related expenses were offset by a slight decrease in the number of workers (through the use of automation) and by shifting some assembly work to Myanmar. Gross profits increased by $211,000 in fiscal 2016 compared to fiscal 2015 due to the 2.5% increase in net sales.

 

Selling, general and administrative expenses for fiscal 2016 and 2015 remained substantially unchanged (selling, general and administrative expenses decreased by $34,000, or 0.76%) as the Company was able to maintain its operating expenses at its Hong Kong administrative expense while absorbing the increased costs associated with establishing the Myanmar operations. Selling, general and administrative expense as a percentage of net sales decreased to 19.2% in fiscal 2016 from 19.9% in fiscal 2015 as a result of increased net sales.

 

As a result of the $211,000 increase in gross profits in fiscal 2016 compared to fiscal 2015 and the slight decrease in selling, general and administrative expenses, the Company’s operating income increased by $245,000, or 19.3%, in fiscal 2016.

 

  40  

 

 

In fiscal 2016 and 2015, the Company had currency exchange rate losses of $21,000 and $125,000, respectively, due to the fluctuations in the value of the RMB and Euro compared to the U.S. dollar. The currency exchange loss in fiscal 2015 was partially offset by a $110,000 gain on the disposition of excess equipment.

 

The Company incurred income taxes of $243,000 in fiscal 2016 compared to income taxes of $134,000 in fiscal 2015 as a result of the increase in net income in fiscal 2016. The Hong Kong statutory profits tax remained unchanged at 16.5% in fiscal 2016. However, the Company’s effective tax rate was 16% in fiscal 2016 compared to 10.4% in fiscal 2015 because of variances in certain non-deductible items.

 

The Company’s net income in fiscal 2016 increased to $1,251,000 from $1,150,000 in fiscal 2015 because of the increase in net sales and gross margins while selling, general and administrative expenses remained substantially unchanged.

 

Liquidity and Capital Resources

 

The following table sets forth a summary of our cash flows for the periods indicated:

 

    Year Ended March 31,  
    2015     2016     2017  
    (In thousands)  
Net cash provided by operating activities   $ 4,223     $ 1,256     $ 2,224  
Net cash provided by (used in) investing activities     815       (464 )     (197 )
Net cash used in financing activities     (728 )     (1,364 )     (1,135 )
Net increase (decrease) in cash and cash equivalents     4,310       (572 )     892  
Cash and cash equivalents at beginning of period     5,416       9,727       9,140  
Effect of exchange rate changes     1       (15 )     (4 )
Cash and cash equivalents at end of period   $ 9,727     $ 9,140     $ 10,028  

 

As of March 31, 2017, the Company had working capital of $10,200,000, compared to working capital of $10,657,000 as of March 31, 2016. As of March 31, 2017, the Company had a working capital ratio of 2.6 to 1.

 

The Company’s prepaid and other current assets as of March 31, 2017 and March 31, 2016 included approximately $290,000 and $191,000, respectively, of deposits held by the Chinese Customs Department under its Customs License Deposit program related to the Company’s imports of the raw materials. The amount of funds held on deposit with the Chinese Customs Department fluctuates depending on deposits made by the Company when it imports additional raw materials and when such funds are returned to the Company upon the export of the finished goods.

 

  41  

 

 

The Company has historically generated sufficient funds from its operating activities to finance its operations and there has been little need for external financing other than capital leases which are used to finance equipment acquisitions and letter of credit facilities for secured purchases of materials and components from overseas vendors. For fiscal 2017, the Company had $2,224,000 of positive cash from its operating activities primarily because of its net income of $525,000, $266,000 of depreciation and amortization non-cash expenses, $858,000 decrease of increased collection of accounts receivables, and a $1,040,000 increase in accounts payable. The foregoing was offset by a $834,000 increase in inventories. The Company increased inventories in order to have sufficient reserves at its Myanmar facility to be able to promptly fulfill anticipated customer orders.

 

The amount of cash and cash equivalents held by the Company on March 31, 2017 increased by $888,000 (to $10,028,000 in 2017) primarily because of the increased collections of accounts receivable and the increase in unpaid accounts payable. The foregoing changes are the result of the timing of payments the Company’s customers at increase in raw material and other purchases by the Company at the end of the fourth fiscal quarter.

 

As of the date of this Annual Report the Company has no outstanding bank loans. However, the Company also does not have any bank credit facilities under which it can borrow funds should the Company need additional capital to fund unanticipated expenses (such as funding unbudgeted expenses related to the Myanmar facility, posting additional deposits/bonds with governmental agencies, or funding certain operating expenses as a result of an unexpected slowdown of customer orders). Accordingly, the Company will be dependent on its current financial resources should unanticipated expenses arise. No assurance can be given that its current reserves will be sufficient.

 

The Company anticipates that, during the current fiscal year ending March 31, 2018, it will invest in additional equipment and will fund the expansion and improvement of the factory operated by its Myanmar subsidiary. Based on the Company’s estimated budget for these planned expenditures, the Company believes that it has sufficient cash on hand to fund all of these anticipated capital expenditures.

 

As a result of its currently available working capital and its internal projections of revenues and expenses for the next year, the Company believes that its working capital requirements and capital needs for at least the next 12 months can be funded through a combination of internally generated funds and its current cash balances.

 

Impact of Inflation

 

The average annual inflation rate in China was reported at approximately 2.0% in 2016. However, the Company’s actual cost of operations has significantly exceeded the overall inflation rate in China. The rapid growth of China’s economy in general, and the growth in Shenzhen in particular, has in the past few years increased the Company’s operating costs, including energy prices and labor costs. These increased costs have adversely affected the Company’s cost of operations, have caused the Company to increase its prices, and have resulted in the loss of some customers.

 

  42  

 

 

In the fiscal year ended March 31, 2017, the Company generated most of its revenues from sales of products that it manufactured at its facilities in Shenzhen, in the PRC, and to a lesser extent, from the assembly services provided by its facility in Yangon, Myanmar. The economy in China has grown significantly over the past 25 years, which has resulted in increased inflation and a significant increase in the average cost of labor, especially in the coastal cities such as Shenzhen. China’s consumer price index, the broadest measure of inflation, rose on average approximately 2.0% in 2016. The minimum wage in Shenzhen, China was approximately 12.3% higher at December 31, 2016 than it was at the end 2014. Although the rate of increase in wages has slowed, according to China’s National Bureau of Statistics, the average workers’ wages throughout China rose an estimated 8.0% in 2016, 7.4% in 2015, and 9.8% in 2014. The Company’s actual labor costs have risen by over 7% in the past three years. Despite the slowing economy in China, because of the growing shortage of workers, the overall average wage in Shenzhen is expected to continue to grow. As of June 1, 2017, the minimum wage in Shenzhen has increased by 4.9% from the prior year. While the Company pays more than the minimum wage, the increase in the minimum wage requires the Company’s to increase its payroll. Continuing increases in China’s inflation and material increases in wages for its administrative and technical staff will diminish the Company’s competitive advantage against OEM companies in lower cost developing countries and, unless the Company is able pass on these increased costs to its customers by increasing prices for its products and services, the Company’s profitability and results of operations could be materially and adversely affected.

 

Exchange Rates

 

The Company transacts its business from its Hong Kong sales and purchasing offices with its vendors and customers primarily in U.S. dollars and, to a lesser extent, in Hong Kong dollars and Euros. As a result of the assembly/manufacturing operations that the Company conducts in Myanmar, the Company now also transacts an increasing amount of business in the Myanmar Kyat. However, the Company’s current turnover in kyat is not yet material. While the Company faces a variety of risks associated with changes among the relative value of these currencies, because the Company pays all of its Shenzhen factory expenses in RMB, the changes in the value of the RMB compared to the U.S. dollar was the most significant in the fiscal year ended March 31, 2017. During the period from March 31, 2016 to March 31, 2017, the value of the RMB compared to the U.S. dollar decreased by approximately 5.6%.

 

The Company makes its payments for its manufacturing facilities and factory workers in Shenzhen, China, in RMB. The value of the RMB compared to the U.S. dollar was lower on March 31, 2017 compared to a year earlier. A decrease in the value of the RMB compared to the U.S. dollar decreases the Company’s operating costs (expressed in U.S. dollars). Likewise, the Company makes its payments for its manufacturing facilities and factory workers in Yangon, Myanmar, in the Burmese Kyat. The value of the Kyat compared to the U.S. dollar was lower on March 31, 2017 compared to a year earlier. A decrease in the value of the Kyat compared to the U.S. dollar decreases the Company’s operating costs (expressed in U.S. dollars) in Myanmar. These currency rate changes in the RMB and the Kyat benefitted the Company in the fiscal year ended March 31, 2017. Currency fluctuations in the future may have material to affect the results of the Company’s operations.

 

  43  

 

 

In order to mitigate the currency exchange rate risks related to changes in the value of the dollar relative to the Euro, the Company has increasingly asked its European customers to pay in U.S. dollars. For fiscal 2017, substantially all of the Company’s sales to its European customers were paid in U.S. dollars. In addition, the Company has entered into agreements with certain of its larger European customers that permit the Company’s prices to be adjusted every three months to account for currency fluctuations. The fluctuation of the RMB/U.S. dollar and the Euro/U.S. dollar exchange rates have, in the past, resulted in significant currency exchange gains and losses. However, in fiscal 2017 and 2016, the Company incurred a currency exchange losses of only $19,000 and $21,000, respectively.

 

The Company does not utilize any form of financial hedging or option instruments to limit its exposure to exchange rate or material price fluctuations and has no current intentions to engage in such activities in the future. Accordingly, material fluctuations in the exchange rates between the U.S. dollar and other currencies could have a material impact on the Company’s future results. As a result of the Company’s expansion into Myanmar, it will also be subject to the currency risks associated with the Myanmar Kyat (MMK), the official currency of that country.

 

Trend Information

 

The primary trend during fiscal 2017 that is expected to continue in the current fiscal year is the increase in operating costs, particularly the cost of labor, in both China and Myanmar. In the current fiscal year ending March 31, 2018, the Company believes that it will continue to shift more of its assembly and manufacturing activities to Myanmar in order to offset increases in the operating costs (particularly the high cost of labor) and to address the shortage or workers in China. As a result of the decreased birth rate and the increased affluence of Chinese workers, lower wage factory workers are more difficult to find in China. To date, the Myanmar subsidiary has been able to lower the overall cost of some of the products that the Company manufactures for its clients. The Company estimates that as of March 31, 2017, approximately 38% by the number of assembly workers, and about 20% by revenues generated assembly operations resulted from the Myanmar subsidiary. Now that the Myanmar subsidiary will also commence manufacturing components, a portion of the Company’s component business will shift from Shenzhen to Yangon in 2017 and thereafter. As the operations of the Myanmar assembly facility are further integrated with the Company’s operations in China, the Company expects that it will be able to maintain, and possibly reduce its overall manufacturing and assembly costs, which the Company believes will enable it to retain manufacturing orders that otherwise could move to other developing countries (or even move back to Europe to be manufactured in highly automated facilities). However, labor and other expenses continue to rise in Shenzhen. The Company believes that material increases in the cost of labor in Myanmar are possible in the near future. Recent worker strikes in Myanmar and government imposed wage increases in Yangon have increased costs in Myanmar, and have made the future profitability of the Myanmar subsidiary somewhat uncertain. If wages do increase materially, and if employment relations in Myanmar continue to deteriorate as they have in the past few months, the Company may not shift more of its component manufacturing to the Myanmar subsidiary, which will result in an increase the Company’s overall cost of manufacturing and would negatively impact the Company’s goal to maintain competitive prices for its products.

 

Other than as disclosed elsewhere in this Annual Report on Form 20-F, the Company is not aware of any trends, uncertainties, demands, commitments or events for the period from April 1, 2017 to March 31, 2018 that are reasonably likely to have a material adverse effect on our net revenues, income, profitability, liquidity or capital resources, or that caused the disclosed financial information to be not necessarily indicative of future operating results or financial conditions.

 

  44  

 

 

Off-Balance Sheet Arrangements

 

The Company is not a party to off-balance sheet arrangements and does not engage in trading activities involving non-exchange traded contracts. In addition, the Company has no financial guarantees, debt or lease agreements or other arrangements that could trigger a requirement for an early payment or that could change the value of the Company’s assets.

 

Contractual Obligations

 

The following is a summary of the Company’s contractual obligations as of March 31, 2017:

 

    Payment due by Year Ending March 31,  
Contractual Obligations   Total     2018     2019     2020     2021     2022 and
thereafter
 
    $’000     $’000     $’000     $’000     $’000     $’000  
Operating Leases     3,411       1,138       1,158       1,115       -       -  
Capital commitment on purchase of plant and equipment     -       -       -       -       -       -  
Purchase obligations     1,257       1,257       -       -       -       -  
Total     4,668       2,395       1,158       1,115       -       -  

 

Recent issued accounting standards not yet adopted

 

In May 2014, the Financial Accounting Standards Board (“FASB”) issued an accounting standard update which outlines a single comprehensive model for entities to use in accounting for revenue arising from contracts with customers and supersedes most current revenue recognition guidance, including industry-specific guidance. The core principal of this new revenue recognition model is that an entity should recognize revenue to depict the transfer of promised goods or services to customers in an amount that reflects the consideration for which the entity expects to be entitled in exchange for those goods or services. This update also requires enhanced disclosures regarding the nature, amount, timing, and uncertainty of revenue and cash flows arising from an entity’s contracts with customers. In August 2015, the FASB issued an accounting standard update which defers the effective date of the new revenue recognition accounting guidance by one year, to annual and interim periods beginning after December 15, 2017, and early adoption is permitted for annual and interim periods beginning after December 15, 2016. From March 2016 through May 2016, the FASB issued accounting standard updates which amend and further clarify the new revenue guidance such as reporting revenue as a principal versus agent, identifying performance obligations, accounting for intellectual property licenses, assessing collectability and presentation of sales taxes. The guidance can be applied either retrospectively to each period presented or as a cumulative-effect adjustment as of the date of adoption. The Company will apply a cumulative-effect adjustment as of the date of adoption. Based on management’s assessment of the application of this guidance, the Company does not expect a material impact on amounts reported and disclosures made in the Company’s consolidated financial statements.

 

  45  

 

 

In July 2015, the FASB issued an accounting standard update, which changes the measurement principle for inventories that is measured using other than last-in, first-out or the retail inventory method from the lower of cost or market to the lower of cost and net realizable value. Net realizable value is defined by FASB as estimated selling prices in the ordinary course of business, less reasonably predictable costs of completion, disposal and transportation. The guidance is effective for interim and fiscals years beginning after December 15, 2016, with early adoption permitted. The guidance should be applied prospectively. The adoption of this guidance is not expected to have a material impact on the Company’s consolidated financial statements.

 

In November 2015, the FASB issued an accounting standard update which simplifies balance sheet classification of deferred taxes. The guidance requires that all deferred tax assets and liabilities, along with any related valuation allowance, be classified as noncurrent. The guidance is effective for interim and fiscals years beginning after December 15, 2016, with early adoption permitted. The guidance can be applied either prospectively to all deferred tax liabilities and assets or retrospectively to all periods presented. The adoption of this guidance is not expected to have a material impact on the Company’s consolidated financial statements.

 

In January 2016, the FASB issued an accounting standard update which improves certain aspects of recognition, measurement, presentation, and disclosure of financial instruments. The guidance changes the measurement of investments in equity securities and the presentation of certain fair value changes for financial liabilities measured at fair value, and also amends certain disclosure requirements associated with the fair value of financial instruments. The guidance is effective for interim and fiscals years beginning after December 15, 2017, with early adoption permitted for certain changes. The guidance should be applied as a cumulative-effect adjustment as of the date of adoption, except for the guidance related to equity securities without readily determinable fair values should be applied prospectively. The adoption of this guidance is not expected to have a material impact on the Company’s consolidated financial statements.

 

In February 2016, the FASB issued an accounting standard update on leases, which amends various aspects of existing accounting guidance for leases. The guidance requires all lessees to recognize a lease liability and a right-of-use asset, measured at the present value of the future minimum lease payments, at the lease commencement date. Lessor accounting remains largely unchanged under the new guidance. The guidance is effective for interim and fiscals years beginning after December 15, 2018, with early adoption permitted. Management is currently assessing the potential impact of adopting this guidance on the Company’s consolidated financial statements.

 

In August 2016, the FASB issued an accounting standard update which amends the guidance on the classification of certain cash receipts and payments in the statement of cash flows. The guidance is effective for interim and fiscal years beginning after December 15, 2017, with early adoption is permitted. The guidance should be applied retrospectively. The adoption of this guidance is not expected to have a material impact on the Company’s consolidated financial statements.

 

  46  

 

 

In January 2017, the FASB issued an accounting standard update which eliminates step two from the goodwill impairment test and instead requires an entity to recognize an impairment charge for the amount by which the carrying value exceeds the reporting unit’s fair value, limited to the total amount of goodwill allocated to that reporting unit. This guidance is effective for interim and fiscals year beginning after December 15, 2019, with early adoption permitted. The guidance should be applied prospectively. Management is currently assessing the potential impact of adopting this guidance on the Company’s consolidated financial statements. The adoption of this guidance would only impact the Company’s consolidated financial statements in situation where as impairment of a reporting unit’s assets is determined and the measurement of the impairment charge.

 

Critical Accounting Policies and Estimates

 

The Company prepares its consolidated financial statements in accordance with accounting principles generally accepted in the United States of America. The preparation of these financial statements requires the Company to make estimates and assumptions that affect the reported amounts of assets and liabilities and the disclosure of contingent assets and liabilities at the date of the financial statements and the reported amount of revenues and expenses during the reporting period. On an on-going basis, the Company evaluates its estimates and judgments, including those related to bad and doubtful debts. The Company bases its estimates and judgments on historical experience and on various other factors that the Company believes are reasonable. Actual results may differ from these estimates under different assumptions or conditions.

 

The following critical accounting policies affect the more significant judgments and estimates used in the preparation of the Company’s consolidated financial statements. For further discussion of our significant accounting policies, refer to Note 2 “Summary of Significant Accounting Policies” of our consolidated financial statements in Item 18.

 

Revenue recognition – The Company recognizes revenue from the sale of products, when all of the following conditions are met:

 

· Persuasive evidence of an arrangement exists;

 

· Delivery has occurred;

 

· Price to the customer is fixed or determinable; and

 

· Collectability is reasonably assured.

 

Revenue from sales of products is recognized when the title is passed to customers upon shipment and when collectability is reasonably assured. The Company does not provide its customers with the right of return (except for quality) or price protection. There are no customer acceptance provisions associated with the Company’s products. All sales are based on firm customer orders with fixed terms and conditions, which generally cannot be modified.

 

  47  

 

 

Allowance for doubtful debts is often based on complex judgments and assumptions that the Company believes to be reasonable but are inherently uncertain and unpredictable. Actual results could differ from those estimates.

 

The Company evaluates the recoverability of its accounts receivable primarily based on the ages of receivables and factors surrounding the credit risks of specific customers. The Company regularly analyses its customer accounts, and when it becomes aware of a specific customer’s inability to meet its financial obligations to the Company, such as in the case of bankruptcy filings or deterioration in the customer’s operating results or financial positions, the Company records a reserve for bad debts to reduce the related receivables to the amount that it reasonably believes is collectible.

 

If circumstances related to specific customers changes, the Company’s estimates of the recoverability of receivables will be further adjusted. In the event that accounts receivable become uncollectible, the Company records additional allowances to such receivables.

 

Item 6. Directors, Senior Management and Employees

 

Directors and Executive Officers

 

The Directors and executive officers of the Company as of June 26, 2017 are listed below.

 

Name   Age   Positions
Roland W. Kohl   68   Chief Executive Officer, Director, Chairman of the Board
Holger Will   51   Chief Operating Officer
Alan Chan   53   Chief Financial Officer, Secretary
Tiko Aharonov (1) (2)   70   Director
Uri Bernhard Oppenheimer (1) (2)   81   Director
Shlomo Tamir (1) (2)   70   Director
Kevin Yang Kuang Yu   60   Director
Irene Wong Ping Yim (1)   51   Director
Brian Geary (2)   60   Director
George Leung Wing Chan (1)   64   Director

 

 

(1) Current member of Audit Committee.
(2) Member of Compensation Committee

 

The Directors hold office until their term has expired and they are re-elected at an annual meeting of shareholders. The Company’s Articles of Association provide that the Board of Directors is divided into three classes of directors with staggered terms of office. At each annual meeting of shareholders, the members of one class of directors will be elected for a term of office to expire at the third succeeding annual meeting of shareholders after their election, and until their successors have been duly elected and qualified. The next annual meeting of shareholders is currently scheduled to be held on July 28, 2017. At that meeting, one class of directors (consisting of Uri Bernhard Oppenheimer and Brian Geary) will be elected to hold office for a three-year term expiring at the 2020 annual meeting.

 

  48  

 

 

As a foreign private issuer organized under the law of the British Virgin Islands, the Company may follow its home company practice in lieu of NASDAQ’s Marketplace Rule 5605(b)(1) requiring the independence of a majority of our directors. During the year ended March 31, 2017 and continuing to date, the composition of the Board of Director has consisted of a majority of directors deemed “independent” under that Rule.

 

Roland W. Kohl . Mr. Kohl was the founder of the Company and has been its Chief Executive Officer since its inception in 1990. He has been a Director of the Company since March 1, 1995. He has overall responsibility for the day-to-day operations of the Company and its subsidiaries. Prior to forming the Company, Mr. Kohl was the Managing Director of Dialbright Company Limited, a camera manufacturer located in China. Mr. Kohl received a degree in mechanical engineering and has over twenty year’s experience in managing factories and manufacturing operations in China. Mr. Kohl is a German national and resides in Hong Kong.

 

Holger Will . Mr. Will has been employed with the Company since 1996 and was appointed as the Company’s Chief Operating Officer effective May 1, 2010. Mr. Will started with the Company as a Production consultant to one of the Company’s subsidiaries and eventually became the Production Manager of that subsidiary. In 2000, Mr. Will became the General Manager of Kayser Technik Ltd., the Company’s marketing arm to German customers. As Chief Operating Officer, Mr. Will now is involved in all of the Company’s operations.

 

Alan Chan. Mr. Chan was appointed as the Company’s Chief Financial Officer and Secretary in September 2010. From June 2009 until he joined the Company, Mr. Chan served as chief financial officer for a joint venture in China with Laureate Education Group. He previously served as vice president and chief financial officer for DeCoro, an Italian sofa manufacturer with two facilities in Shenzhen, and as financial controller for San Miguel Shunde Brewery Co. Ltd., a foreign joint venture engaged in the manufacturing and sale of beer products for China and overseas markets. He also served as financial controller for Hua Yang Printing Holdings Co. Ltd., a manufacturer of children’s paper products. Mr. Chan began his professional career as an accountant with Nelson Wheeler, an Australian CPA firm, and subsequently with PricewaterhouseCoopers — formerly Coopers and Lybrand. Mr. Chan earned a Master of Arts degree in accounting from Curtin University in Australia and a Bachelor of Arts degree from the University of Lancaster in the United Kingdom.

 

Tiko Aharonov . Mr. Aharonov has been a Director of the Company since its inception in 1990 and was a General Manager of the Company’s camera operations from 1998 to 2004. Until the closing of the Company’s Bulgarian facility in 2004, Mr. Aharonov acted as the General Manager of the Bulgarian operations. He was a bank manager for a leading Israeli commercial and retail bank from 1969 to 1989 and has operated his own real estate and investment company for high net worth individuals desiring to invest in real estate in Israel. Mr. Aharonov also represents investors in real estate in Bulgaria.

 

Uri Bernhard Oppenheimer. Mr. Oppenheimer was elected to the Board of Directors in July 2005. Mr. Oppenheimer is founder, managing director and the majority owner of U.B. Oppenheimer GmbH in Germany and MIG Germany GmbH in Germany.

 

  49  

 

 

Shlomo Tamir. Mr. Tamir was elected to the Board of Directors in July 2005. Mr. Tamir worked with Taman/Israel Aircraft Industry from 1969 until his retirement in 2013. While at Taman/Israel Aircraft Industry, he held various positions, including Director of Product Assurance, Program Manager, and Group of Programs Manager.

 

Kevin Yang Kuang Yu. Mr. Yang was elected to the Board of Directors in July 2005. From 2004 until his retirement in 2013, Mr. Yang was the China-USA Director of Holt Asia LLC (now owned by Chesta Co., Inc.) in the U.S. Prior thereto, from 2000 to May 2003, Mr. Yang set up and managed a factory in Shanghai for CHT Co., Limited ( now owned by Chesta Co., Inc.) and controlled and managed other manufacturing facilities in China. Mr. Yang has also been involved with the trading companies that were engaged in exporting products to the US.

 

Irene Wong Ping Yim. Ms. Wong was elected to the Board of Directors in July 2005. For over ten years, Ms Wong was the Chief Accountant of CNIM Hong Kong Ltd. From 1994 to 2001, she was the Accounting Manager of Highway Holdings. Ms Wong graduated from Deakin University with a master degree in Business Administration. She is currently a fellow member of the Association of Chartered Certified Accountant and a member of Hong Kong Institute of Certified Public Accountants.

 

Brian Geary. Mr. Geary was appointed to the Board of Directors in December 2005. Mr. Geary has since 2002 been a director of LMI Aerospace, a public company that manufactures components, assemblies, and kits for the aerospace, defense, and technology industries. From 1978 until 2002, Mr. Geary was the President and owner Versaform Corp. and Versaform Canada, two companies that were sold to LMI Aerospace in 2002.

 

George Leung Wing Chan . Mr. Leung was appointed to the Board of Directors in December 2005. Since 2004, Mr. Leung has been a management consultant. Prior thereto, from 1995 to 2004, he was the Managing Director/Vice President of Lucky Metal & Plastic Mfg. Co., Ltd.

 

There is no family relationship between any of the above-named officers, directors or employees. To the Company’s knowledge, no arrangement or understanding exists between any such director and executive officer and any major shareholder, customer, supplier or other party pursuant to which any director or executive officer was elected as a director or executive officer of the Company.

 

Compensation of Directors and Officers

 

The aggregate amount of compensation (including non-cash benefits) paid by the Company and its subsidiaries during the year ending on March 31, 2017 to all of the directors and officers listed above, as a group (10 people), for services rendered to the Company and its subsidiaries in all capacities was approximately $824,000, excluding amounts paid by the Company as dividends to directors and executive officers in their capacity as shareholders of the Company. Mr. Kohl’s new employment agreement expires in March 2019. As Mr. Kohl has previously done in each of the past four fiscal years, Mr. Kohl has once again voluntarily agreed to temporarily reduce his salary in the current fiscal year. In the fiscal years ended March 31, 2014 and 2015, Mr. Kohl agreed to a 23% reduction in his salary. In the fiscal years ended March 31, 2016 and 2017, Mr. Kohl agreed to have his salary reduced by 30% and 31%, respectively. The foregoing salary reductions were voluntary on behalf of Mr. Kohl, and he may at any time in the future demand that the Company again pay the full contract amount of his salary. Mr. Kohl, and the five other senior managers of the Company, are entitled to receive cash payments equal to three times their annual salary in the event of a change of control of the Company without the approval of the Board of Directors.

 

  50  

 

 

During the past fiscal year, the Company paid each non-executive director (Tiko Aharonov, Uri Bernhard Oppenheimer, Shlomo Tamir, Kevin Yang Kuang Yu, Irene Wong Ping Yim, Brian Geary, and George Leung Wing Chan) an annual director’s fee of $12,000, and reimbursed them for their reasonable expenses incurred in connection with their services as directors. In addition, the Chairman of any committee is paid an additional fee of $2,000 per year, and the members of a committee are paid an additional fee of $2,000 per year for each committee on which they serve.

 

Options of Directors and Senior Management

 

During the past few years, the Company has not granted any of its officers or directors any options to purchase Common Shares. As a result, as of March 31, 2017 none of the Company’s directors or executive officers owned any stock options.

 

For additional information regarding the share ownership in the Company by the Company’s directors, executive officers, and principal shareholders is set forth in Item 7, “Major Shareholders and Related Party Transactions,” below.

 

In 2010 the Company adopted the “2010 Stock Option And Restricted Stock Plan” (the “2010 Option Plan”). Under the 2010 Option Plan, the Company is authorized to grant options, and to issue restricted shares, for a total of 600,000 shares. The 2010 Option Plan is administered by the Compensation Committee appointed by the Board, which determines the terms of the options granted, including the exercise price, the number of Common Shares subject to the option and the option’s exercisability. The exercise price of options granted to participants who are not subject to taxation in the United States may be less than the fair market value of the Common Shares on the date of grant. Unless otherwise specified by the Compensation Committee, the maximum term of options granted under the 2010 Option Plan is five years. As of March 31, 2017, no options had been granted under the 2010 Option Plan.

 

Board Practices

 

Directors of the Company are elected at the Company’s annual meeting of shareholders and serve until their successors take office, or until their death, resignation or removal. The Company’s Articles of Association provide for the classification of our Board of Directors into three classes of directors with staggered terms of office. At each annual meeting, one class of directors (consisting of either two or three directors) will be elected for a term of office to expire at the third succeeding annual meeting of shareholders after their election and until their successors have been duly elected and qualified (i.e. directors will be elected for three year terms).

 

  51  

 

 

The Company generally holds its annual meeting of shareholders within 60 days after the filing of its Annual Report on Form 20-F with the Commission. Executive officers serve at the pleasure of the Board of Directors of the Company. As of the date of this Annual Report, there are no agreements with any of the Directors that would provide the Directors with any benefits upon termination of employment. However, in the event of a change of control without the approval of the Board of Directors, Mr. Kohl, and the five other senior managers of the Company, are entitled to receive cash payments equal to three times their annual salary.

 

Audit Committee During fiscal 2017, the members of the Audit Committee of the Board of Directors were Irene Wong Ping Yim, Uri Bernhard Oppenheimer, Shlomo Tamir, George Leung Wing Chan, and Tiko Aharonov. The Audit Committee reviews, acts on and reports to the Board of Directors on various auditing and accounting matters, including the selection of the Company’s auditors, the scope of the annual audits, fees to be paid to the auditors, the performance of the independent auditors, any additional services to be provided by the auditors, and the Company’s accounting practices. Each of these individuals is a non-employee director and is independent as defined under the Nasdaq Stock Market’s listing standards, and each has significant knowledge of financial matters (one of the members has an advanced degree in business administration). Ms. Wong has been designated by the Board as the “audit committee financial expert” as defined under Item 401(h)(2) of Regulation S-K of the Securities Exchange Act of 1934, as amended. The Audit Committee met three times during fiscal 2017. The Audit Committee operates under a formal charter that governs its duties and conduct.

 

Compensation Committee During the past fiscal year, the Compensation Committee of the Board of Directors consisted of Shlomo Tamir, Uri Bernhard Oppenheimer, Brian Geary and Tiko Aharonov. The Compensation Committee administers the Company’s 2010 Stock Option And Restricted Stock Plan and establishes the salaries and incentive compensation of the executive officers of the Company.

 

All of the Company’s directors (there currently are eight directors, seven of whom are independent) participate in the selection of director nominees. Accordingly, the Board of Directors has not yet found it necessary to have a separate Nominating Committee. The Board of Directors has not established any specific minimum qualifications for director candidates or any specific qualities or skills that a candidate must possess in order to be considered qualified to be nominated as a director. Qualifications for consideration as a director nominee may vary according to the particular areas of expertise being sought as a complement to the existing board composition. In making its nominations, the Board of Directors generally will consider, among other things, an individual’s business experience, industry experience, financial background, breadth of knowledge about issues affecting our company, time available for meetings and consultation regarding company matters and other particular skills and experience possessed by the individual.

 

Employees

 

As of the middle of June 2017, the Company had a total of 260 persons who were working on a full-time basis for the Company. All of the Company’s employees are employed by the Company’s various wholly-owned subsidiaries. Of the foregoing workers and employees, 76 were engaged in the administration of the Company (including marketing, purchasing, personal, book keeping, import/export, material control, shipping, security), engineering, design and development, tool and fixture production, and teaching at the Company’s technical training school, and the balance, 184 employees, were engaged in manufacturing, quality assurance, warehousing and other supporting functions.

 

  52  

 

 

In addition to the employees hired by the Company (directly or through its wholly-owned subsidiaries), Kayser Myanmar, the Myanmar based company in which the Company currently owns an 84% stake, employed a total of 94 employees as of March 31, 2017.

 

The number of workers employed by the Company fluctuates largely due to the availability of workers and the time of year, and the Company occasionally experiences temporary shortages of workers. From time to time, the availability of workers has been adversely affected because of the high demand for such workers in Shenzhen due to transportation difficulties in bringing workers to Shenzhen, and due to seasonal demands on labor such as harvesting when the mainly rural-based laborers are required to return to their village. In addition, most workers are unavailable during the traditional Chinese holidays, including the Chinese New Year’s holiday. Due to these factors, the Company experiences high turnover of employees annually.

 

Since the enactment of the new Labor Contract Law that became effective on January 1, 2008, Chinese workers are allowed to join an official trade union. However, to the Company’s knowledge, none of the Company’s employees have joined labor unions or become a party to a collective bargaining agreement. In June 2007, the National People’s Congress of the PRC enacted new labor law legislation called the Labor Contract Law, which became effective on January 1, 2008. That law formalized workers’ rights concerning overtime hours, pensions, layoffs, employment contracts and the role of trade unions. The law also requires employers to conclude an “open-ended employment contract” with any employee who either has worked for the employer for 10 years or more or has had two consecutive fixed-term contracts. An “open-ended employment contract” is in effect a lifetime, permanent contract, which is terminable only in specified circumstances, such as a material breach of the employer’s rules and regulations, or for a serious dereliction of duty. Under the new law, reducing the Company’s workforce by 20% or more may occur only under specified circumstances. All of these new labor provisions have significantly increased the Company’s cost of labor and have restricted certain of the Company’s operating procedures. Partly in response to this labor law, the Company has been increasing the amount of automation used in its manufacturing processes and has been reducing the size of its workforce. In addition, in order to partially offset the increasing labor costs in Shenzhen, China, the Company acquired an 84% interest in Kayser Myanmar and has transferred much of its assembly operations to the Myanmar assembly facility that is operated by Kayser Myanmar.

 

The Company believes that its relations with its administrative employees in Hong Kong and with its managers and technicians in China are good. However, many employees engaged in manufacturing, packaging and shipping at the Company’s Shenzhen, China, factory are seasonal workers who frequently change jobs. Accordingly, the Company’s relationship with these transient workers is short-term and superficial and depends on the labor market in Shenzhen in general. During any operating year, because of the transient nature of many of its workers (many of whom resign during the year), the Company will normally have a high turnover rate. As a result, the Company cannot guarantee that its workers will not strike in the future or otherwise leave and accept employment elsewhere.

 

  53  

 

 

Share Ownership

 

The share ownership of the Company’s officers and directors is listed under Item 7 of this Annual Report.

 

Item 7. Major Shareholders and Related Party Transactions

 

Major Shareholders . The Company is not directly or indirectly owned or controlled by any other corporation or any foreign government. The following table sets forth, as of June 26, 2017, certain information with respect to the beneficial ownership of the Company’s Common Shares by each person (i) who is an executive officer or director of the Company, or (ii) known by the Company to own beneficially more than 5% of the outstanding Common Shares outstanding as of such date.

 

Name of Beneficial Owner or
Identify of Group (1)
  Number of Common
Shares Beneficially
Owned
    Percent Beneficial
Owned (**)
 
Roland W. Kohl     614,067 (2)     16.2 %
Tiko Aharonov     235,000       6.2 %
Holger Will            
George Leung Wing Chan     3,000       *
Brian Geary     11,172       *
Irene Wong Ping Yim     3,000       *
Kevin Yang Kuang Yu     11,224       *
Shlomo Tamir            
Uri Bernhard Oppenheimer     18,000       *
David Tamir     359,830       9.5 %
Alan Chan            

 

* Less than 1%.
** Under the rules of the Securities and Exchange Commission, shares of Common Shares that an individual or group has a right to acquire within 60 days pursuant to the exercise of options or warrants are deemed to be outstanding for the purpose of computing the percentage ownership of such individual or group, but are not deemed to be outstanding for the purpose of computing the percentage ownership of any other person shown in the table.

 

(1) The address of each of the named holders is c/o Highway Holdings Limited, Suite 1801, Level 18, Landmark North, 39 Lung Sum Avenue, Sheung Shui, New Territories, Hong Kong.
(2) Includes 245,770 shares of Common Stock registered in the name of Roland Kohl Company Limited, and 245,770 shares held in a trust for Mr. Kohl’s daughter. Roland Kohl is the sole trustee of the Roland Kohl Company Limited and of his daughter’s trust.

 

  54  

 

 

Of our 42 record holders, 25 are residents of the United States. Excluding shares held in street name, the U.S. resident shareholders own 18,369 Common Shares. To the Company’s knowledge, foreign record holders own approximately 381,131 Common Shares, although a number of the Company’s principals and other foreign shareholders also own shares in streetname. Based on the Company’s records of shares owned by its officers, by its record holders, and by other foreign holders who hold their shares in street name, the Company estimates that at least 37% of the Company’s outstanding shares are owned by foreign shareholders. There have been no significant changes in the percentage ownership held by any major shareholders during the past three years, and there are no arrangements known to the Company, the operation of which may at a subsequent date result in a change in control of the Company. All holders of the Common Shares have the same voting rights, and the Company’s major shareholders do not have different voting rights.

 

Related Party Transactions.

 

The Company did not engage in any related party transactions during the fiscal year ended March 31, 2017.

 

Item 8. Financial Information.

 

A. Consolidated Statements and Other Financial Information

 

We have included consolidated financial statements as part of this annual report.

 

B. Significant Changes

 

We have not experienced any significant changes since the date of our audited consolidated financial statements included in this annual report.

 

Dividend Policy .

 

The Company attempts to pay a cash dividend annually to all holders of its Common Shares, subject to its profitability and cash position. The Company made three dividend payments of $0.10 per share each in the fiscal year ended March 31, 2017 (dividends were paid on April 18, 2016, September 15, 2016, and October 25, 2016). In addition, the Company paid a $0.07 per share dividend in the current fiscal year, on April 10, 2017.

 

Dividends are declared and paid at the discretion of the Board of Directors and depend upon, among other things, the Company’s net profit after taxes, the anticipated future earnings of the Company, the success of the Company’s business activities, the Company’s capital requirements, and the general financial conditions of the Company. Although it is the Company’s intention to pay dividends during profitable fiscal years, no assurance can be given that the Company will pay, in fact, pay any dividends in the future even if its has a profitable year or is otherwise capable of doing so.

 

Legal Proceedings.

 

The Company may occasionally become subject to legal proceedings and claims that arise in the ordinary course of its business. However, the Company is not currently subject to any pending legal proceedings that involve amounts that are material to the Company’s financial condition.

 

  55  

 

 

Item 9. The Offer and Listing

 

A. Offer and Listing Details

 

The Company’s Common Shares are currently traded on the Nasdaq Capital Market under the symbol “HIHO” and are not listed for trading in any trading market outside the United States. On June 28, 2017, the last reported sale price of our Common Shares on the Nasdaq Capital Market was $3.45 per share. As of June 23, 2017, there were 42 holders of record of the Company’s Common Shares. However, the Company believes that there are a significantly greater number of “street name” shareholders of the Common Shares.

 

The following table sets forth the high and low closing sale prices as reported by The Nasdaq Stock Market for years for each of the last five years ended March 31, 2017:

 

Year Ended   High     Low  
March 31, 2017     4.78       3.20  
March 31, 2016     5.66       2.82  
March 31, 2015     3.69       2.56  
March 31, 2014     3.70       1.67  
March 31, 2013     2.52       1.41  

 

The following table sets forth the high and low closing sale prices of the Common Shares as reported by Nasdaq during each quarter of the two most recent fiscal years.

 

Quarter Ended   High     Low  
March 31, 2017     4.30       3.30  
December 31, 2016     4.30       3.20  
September 30, 2016     4.78       4.15  
June 30, 2016     4.69       4.16  
                 
March 31, 2016     4.83       2.82  
December 31, 2015     5.25       4.29  
September 30, 2015     5.66       3.33  
June 30, 2015     3.72       3.14  

 

The following table sets forth the high and low closing sale prices of the Company’s Common Shares as reported by the Nasdaq Stock Market during each of the most recent six months.

 

  56  

 

 

Month Ended   High     Low  
May 31, 2017     3.90       3.38  
April 30, 2107     4.00       3.85  
March 31, 2017     4.30       3.90  
February 28, 2017     3.95       3.53  
January 31, 2017     3.65       3.30  
December 31, 2016     3.60       3.20  

 

B. Plan of Distribution

 

No disclosure is required in response to this Item.

 

C. Markets

 

Our Common Shares have been listed on the Nasdaq Capital Market during the past five years, under the symbol “HIHO.”

 

D. Selling Shareholders

 

No disclosure is required in response to this Item.

 

E. Dilution

 

No disclosure is required in response to this Item.

 

F. Expenses of the Issue

 

No disclosure is required in response to this Item.

 

Item 10. Additional Information

 

Share Capital

 

The Company’s authorized capital consists of 20,000,000 Common Shares, $0.01 par value per share. As of both March 31, 2017 and June 26, 2017, there were 3,801,874 Common Shares outstanding. As of March 31, 2017, no options or warrants to purchase Common Shares were outstanding. There have been no events in the last three years which have changed the amount, the number of classes, or voting rights, of our issued capital other than the issuance of a total of 18,000 shares in 2014 upon the exercise of outstanding stock options.

 

Memorandum And Articles Of Association

 

Highway Holdings Limited is registered at Vistra Corporate Services Centre, Wickhams Cay II, Road Town, Tortola, VG 1110, British Virgin Islands and has been assigned company number 32576. The objectives or purposes of the Company are to engage in any act or activity that is not prohibited under British Virgin Islands law as set forth in Clause 4 of the Memorandum of Association. The Company’s Memorandum and Articles of Association are the instruments governing the Company. These documents are comparable in purpose and effect to certificates or articles of incorporation and bylaws of corporations organized in a state of the United States. The Company does not believe that there are any restrictions in its charter or under British Virgin Island law that materially limit the Company’s current or proposed operations.

 

  57  

 

 

The authorized share capital of the Company is $200,000 divided into 20,000,000 Common Shares with par value of $0.01 each. Holders of our Common Shares are entitled to one vote for each whole share on all matters to be voted upon by members, including the election of directors. Holders of our Common Shares do not have cumulative voting rights in the election of directors. All of our Common Shares are equal to each other with respect to liquidation and dividend rights. Holders of our Common Shares are entitled to receive dividends if and when declared by our Board of Directors out of surplus in accordance with British Virgin Islands law. In the event of our liquidation, all assets available for distribution to the holders of our Common Shares are distributable among them according to their respective holdings. Holders of our Common Shares have no preemptive rights to purchase any additional, unissued Common Shares. We have never had any class of stock outstanding other than our Common Shares nor have we ever changed the voting rights with respect to our Common Shares.

 

Clause 10 of the Memorandum of Association provides that if at any time the authorized share capital is divided into different classes or series of shares, the rights attached to any class or series may be varied with the consent in writing of the holders of not less than three fourths of the issued shares of that class or series and of the holders of not less than three fourths of any other class or series of shares which may be affected by such variation.

 

Clause 16 of the Memorandum of Association (which is subject to the provisions of regulation 60 of the Articles) provide that the Memorandum and Articles of Association of the Company may be amended by a resolution of members or a resolution of directors. Regulation 60 of the Articles provides that any proposed change in the Memorandum and Articles of Association not otherwise approved by the majority vote of the shares held by the Company’s non-management members shall be approved by a majority of the Company’s directors and not disapproved by a majority of the Company’s independent directors. Subject to the preceding sentence, our Board of Directors without shareholder approval may amend our Memorandum and Articles of Association. This includes amendments to increase or reduce our authorized capital stock. The Company’s ability to amend its Memorandum and Articles of Association without shareholder approval could have the effect of delaying, deterring or preventing a change in control of the Company, including a tender offer to purchase our Common Shares at a premium over the then current market price.

 

Regulation 10 of the Company’s Articles of Association (the “Articles”) provide that without prejudice to any special rights previously conferred on the holders of any existing shares, the unissued shares in the Company are at the disposal of the directors who may offer, allot, grant options over or otherwise dispose of shares to such persons, at such times and upon such terms and conditions as the Company may by resolution of the directors determine.

 

Regulation 17 provides that the Company may purchase, redeem or otherwise acquire and hold its own shares out of surplus or in exchange for newly issued shares of equal value. However, no purchase, redemption or other acquisition shall be made unless, immediately after the purchase, redemption or other acquisition the Company will be able to satisfy its liabilities as they become due in the ordinary course of its business, and the Company will not be insolvent.

 

  58  

 

 

Provisions in respect of the holding of general meetings and extraordinary general meetings are set out in Regulations 38 to 58 of the Articles and under the International Business Companies Act (now, the BVI Business Companies Act, 2004). The directors may convene meetings of the members of the Company at such times and in such manner and places as the directors consider necessary or desirable, and they shall convene such a meeting upon the written request of members holding 25 percent or more of the outstanding voting shares in the Company. Shareholders may nominate directors for election at an annual meeting of shareholders. To nominate a director, the shareholder must provide the information required by the Articles of Association (such as the nominee’s name and qualifications for membership on the Board of Directors) and must give timely notice to our Secretary in accordance with the Articles of Association. An annual meeting of members is held for the election of directors of the Company and in the manner provided in the Articles of Association. Any other proper business may be transacted at the annual meeting. If the annual meeting for election of directors is not held on the date designated therefore, the directors shall cause the meeting to be held as soon thereafter as convenient. If the Company fails to hold the annual meeting for a period of 30 days after the date designated for the annual meeting, or if no date has been designated for a period of 13 months after the Company’s last annual meeting, a court of competent jurisdiction of the British Virgin Islands may summarily order a meeting to be held upon the application of any member or director.

 

British Virgin Islands law and the Company’s Memorandum and Articles of Association impose no limitations on the right of nonresident or foreign owners to hold or vote such securities of the Company.

 

New Regulation 58 (formerly Regulation 68) of the Company’s Article of Association provides that any action required or permitted to be taken by the shareholders of the Company must be effected at a duly called meeting of the shareholders and may not be effected by any consent in writing by the shareholders.

 

Regulation 60 of the Articles provides that a favorable vote of a majority of the Company’s independent directors is required as to any related party transaction between the Company and any 5% or more members of the Company and/or officer or director of the Company. It also provides that the Company shall use its best efforts to at all times maintain at least two independent directors. However, a director may vote or consent with respect to any contract or arrangement in which the director is materially interested, if the material facts of the interest of each director in the agreement or transaction and his interest in or relationship to any other party to the agreement or transaction are disclosed in good faith or are known by the other directors.

 

In June 2013 the Board of Directors amended Regulation 61 (formerly Regulation 71) to implement a classified Board of Directors. As amended, the Company’s Articles provide that the directors shall be divided into three classes designated as Class I, Class II and Class III. Each class shall consist, as nearly as is possible, of one-third of the number of directors constituting the entire Board of Directors. At each annual meeting of shareholders, the successors to the class of directors whose terms expire at that meeting will be elected for a term of office to expire at the third succeeding annual meeting of shareholders after their election and until their successors have been duly elected and qualified (i.e. directors will be elected for three year terms).

 

  59  

 

 

Regulation 88 of the Articles allows the directors to vote compensation to themselves in respect of services rendered to the Company.

 

There is no provision in the Articles for the mandatory retirement of directors. Directors are not required to own shares of the Company in order to serve as directors.

 

There are no provisions in the Memorandum of Association or Articles of Association governing the ownership threshold above which shareholder ownership must be disclosed.

 

The full text of the Articles and Memorandum of the Company are attached to this Annual Report on Form 20-F as Exhibits 1.1, 1.2, 1.3, 1.4 and 1.5.

 

Material Contracts

 

Other than the leases described in the Property, Plant and Equipment section of Item 4 “Information on the Company” and filed as exhibits to the Company’s Securities and Exchange Commission filings, all other material contracts to which the Company or any member of the group is a party that were entered into during the two years immediately preceding the filing of this Annual Report were entered into in the ordinary course of business.

 

Exchange Controls

 

There are no exchange control restrictions on payment of dividends on the Company’s Common Shares or on the conduct of the Company’s operations either in Hong Kong, where the Company’s administrative offices are located, or the British Virgin Islands, where the Company is incorporated. Other jurisdictions in which the Company conducts operations may have various exchange controls. With respect to the Company’s subsidiaries in China, there are no material restrictions on the payment of dividends and the removal of dividends from China once all taxes are paid and assessed and losses, if any, from previous years have been made good. To date, these controls have not had and are not expected to have a material impact on the Company’s financial results. There are no material British Virgin Islands laws which impose foreign exchange controls on the Company or that affect the payment of dividends, interest or other payments to nonresident holders of the Company’s securities.

 

Taxation

 

No reciprocal tax treaty regarding withholding tax exists between the U.S. and the British Virgin Islands. Under current British Virgin Islands law, dividends, interest or royalties paid by the Company to individuals and gains realized on the sale or disposition of shares are not subject to tax as long as the recipient is not a resident of the British Virgin Islands. The Company is not obligated to withhold any tax for payments of dividends and shareholders receive gross dividends irrespective of their residential or national status.

 

  60  

 

 

Under current Hong Kong tax law, dividends, interest or royalties paid by the Company to individuals and gains realized on the sale or disposition of shares are not subject to tax.

 

Under the U.S. federal income tax law, cash dividends paid to an individual United States citizen or resident alien of the United States (as specifically defined for United States federal income tax purposes) with respect to our Common Shares generally will be taxed as dividend income to the extent such distribution does not exceed the Company’s current or accumulated earnings and profits, as calculated for U.S. federal income tax purposes. Cash dividends made with respect of the Company’s Common Shares that are made in the United States or by a United States related financial intermediary will be subject to United States information reporting rules. In addition, such payments may be subject to United States federal backup withholding tax. U.S. shareholders will not be subject to backup withholding provided that the shareholder provides his/her correct United States federal taxpayer identification number and certifies, under penalties of perjury, that he/she is not subject to backup withholding. Amounts withheld under the backup withholding rules may be credited against the U.S. shareholder’s United States federal income tax, and such shareholder may obtain a refund of any excess amounts withheld under the backup withholding rules by filing the appropriate claim for refund with the IRS in a timely manner.

 

Dividends and Paying Agents

 

The Company has, during the past few years, made several dividend payments to its shareholders. Dividends are declared and paid at the discretion of the Board of Directors and depend upon, among other things, the Company’s net profit after taxes, the anticipated future earnings of the Company, the success of the Company’s business activities, the Company’s capital requirements, and the general financial conditions of the Company. Although it is the Company’s intention to pay dividends during profitable fiscal years, no assurance can be given that the Company will, in fact, pay any dividends in the future even if it has a profitable year or is otherwise capable of doing so. The Company has not set a date on which annual, or other, dividends are paid. To date, the Company has used its transfer agent, Computershare, at 250 Royall Street, Canton, Massachusetts 02021 U.S.A., as its dividend paying agent.

 

Statement by Experts

 

No disclosure is required in response to this Item.

 

Documents On Display

 

The documents concerning the Company that are referred to in this Annual Report may be inspected by shareholders of this Company at the offices of this Company in Hong Kong.

 

The Company is subject to the information requirements of the Securities and Exchange Act of 1934, and, in accordance with the Securities Exchange Act of 1934, the Company files annual reports on Form 20-F and submit other reports and information under cover of Form 6-K with the SEC. You may read and copy this information at the SEC’s Public Reference Room at 100 F Street, N.E., Washington, D.C. 20549. Recent filings and reports are also available free of charge though the EDGAR electronic filing system at www.sec.gov. As a foreign private issuer, the Company is exempt from the rules under the Securities Exchange Act of 1934 prescribing the furnishing and content of proxy statements to shareholders.

 

  61  

 

 

Subsidiary Information

 

No disclosure is required in response to this Item.

 

Item 11. Quantitative and Qualitative Disclosures About Market Risk.

 

The Company sells most of its products in Hong Kong dollars, U.S. dollars, and in Euros. The exchange rate between the U.S. dollar and Hong Kong dollar has remained stable. However, the exchange rate between the Euro and the U.S. and Hong Kong dollars has fluctuated, resulting in currency exchange gains and losses. Although the amount of transactions that the Company effects in Euros has been reducing and was only approximately 0.66% of its total net sales in fiscal 2017, the Company still has some exposure to fluctuations in the rates of exchange between the dollar and the Euro, which fluctuations will continue to affect the Company’s results of operations and its balance sheet. For example, an increase in the value of a particular currency (such as the Euro) relative to the dollar will increase the dollar reporting value for transactions in that particular currency, and a decrease in the value of that currency relative to the dollar will decrease the dollar reporting value for those transactions. This effect on the dollar reporting value for transactions is generally only partially offset by the impact that currency fluctuations may have on costs.

 

The Company conducts all of its manufacturing and assembly operations through its PRC operating subsidiary and through its majority-owned Myanmar subsidiary. The financial performance and position of the PRC subsidiary are measured in terms of renminbi, and all of the operations of the Myanmar subsidiary are denominated in Burmese Kyat. All of the Company’s costs of manufacturing in the PRC, including its labor costs, are incurred, and paid, in renminbi, and all costs in Myanmar are paid in Kyat. Any appreciation in the value of the renminbi or Kyat against the U.S. dollar would consequently have an adverse effect on the Company’s operating costs and on its financial performance when measured in terms of U.S. dollars. During the past two years, despite significant fluctuations, overall the value of the U.S. dollar has appreciated in value compared to both the RMB and the Kyat. During the fiscal year ended March 31, 2017, the Company made payments of approximately 48,000,000 in RMB (or approximately U.S. $7,000,000 based on the exchange rate as of March 31, 2017). If the renminbi had been 1% and 5% more valuable against the U.S. dollars as of March 31, 2017, the amount of such RMB payments would have increased the Company’s expenses by $70,000 and $350,000 respectively. Conversely, if the renminbi had been 1% and 5% less valuable against the U.S. dollars as of March 31, 2017, the amount of such RMB payments would have decreased the Company’s expenses by $70,000 and $350,000, respectively. Should the renminbi appreciate in the future, the Company’s cost structure and pricing could change and have a material negative effect on its operations, sales and financial results. Likewise, the Company pays its Kayser Myanmar expenses in Kyat, which are converted from U.S. dollars. During fiscal 2017, Kayser Myanmar paid approximately $419,000 of expenses in Kyat in U.S. dollars.

 

  62  

 

 

The Company’s foreign exchange risk exposure as a result of its sales that are made in Euros has decreased to 0.66% of its net sales (or $129,000) that were made in fiscal year ended March 31, 2017. In the fiscal year ended March 31, 2017, the value of the Euro compared to the U.S. dollar decreased from approximately one Euro to 1.13 U.S. dollars at the end of March 2016 to one Euro to 1.07 U.S. dollars on March 31, 2017. Accordingly, the payments that the Company received in fiscal 2017 in Euros were exchanged into less U.S. dollars, resulting in a sales decrease. To illustrate the effect of the exchange rate fluctuation on the Company’s net sales, if the Euro had been 10% and 5% less valuable against the U.S. dollars than the actual rate as of March 31, 2017, the Company’s net sales, as presented in U.S. dollars, would have been reduced by approximately $12,900 and $6,450, respectively. Conversely, if the Euro had been 10% and 5% more valuable against the U.S. dollars as of that date, then the Company’s net sales would have increased by approximately $12,900 and $6,450, respectively.

 

The Company has not engaged in currency hedging transactions to offset the risks associated with variations in currency exchange rates. Consequently, significant foreign currency fluctuations and other foreign exchange risks may have a material adverse effect on the Company’s business, financial condition and results of operations. The Company does not currently own any market risk sensitive instruments. The Company does not hedge its currency exchange risks and, therefore, will continue to experience certain gains or losses due to changes in foreign currency exchange rates. The Company has, however, attempted to limit its currency exchange rate exposure by (i) requesting that more of the payments made by its clients be paid in U.S. dollars, and (ii) including in certain of its OEM contracts a contractual provision that adjusts the payments the Company receives if the currency exchange rate changes significantly.

 

The Company’s exposure to interest-rate risk primarily relates to the interest rates on its outstanding debt compared to the interest income it generates on its excess cash. The Company maintains its excess cash in short-term interest-bearing borrowings (that are subject to interest rate fluctuations). The Company had no long-term borrowings that are subject to interest rate changes as of March 31, 2017. Because the Company had cash and cash equivalents of $10,028,000 available as of March 31, 2017 and no interest bearing indebtedness, the Company believes that its interest rate risk is acceptable.

 

Inflation in the PRC, particularly the increase in wages and salaries, has impacted the Company’s cost of operations at its manufacturing facility in the PRC. Continued increase in inflation could have an adverse affect the Company’s costs and margins in the PRC.

 

Item 12. Description of Securities Other Than Equity Securities

 

Not applicable.

 

PART II  

 

Item 13. Defaults, Dividend Arrearages and Delinquencies.

 

Not applicable.

 

Item 14. Material Modification to the Rights of Securities Holders and Use of Proceeds.

 

The Company is a British Virgin Islands company. In the British Virgin Islands, a company’s charter documents that are comparable to a U.S.-domestic corporation’s articles or certificate of incorporation and bylaws are called Memorandum of Association and Articles of Association. On August 6, 2015, the Company filed an amendment with the British Virgin Islands Registrar of Corporate Affairs to amend the Articles of Association. A copy of the Amendment to the Articles of Association as filed with the Registrar of Corporate Affairs of the British Virgin Islands on August 6, 2015 is attached hereto as Exhibit 1.5. The amendment to the Articles of Association effected the following changes:

 

  63  

 

 

A.           The procedures for nominating a person for election to the Board of Directors, particularly nominations made by shareholders, have been clarified to become more consistent with procedures used by public companies in the United States. The new provisions clarify that, among other things, (i) nominations must be made by existing shareholders, (ii) the nominations must be received not less than ninety (90) days prior to the first anniversary of the preceding year’s annual meeting, and (iii) any nomination must include the type of information needed in order to enable the Company to comply with its disclosure requirements under the Exchange Act. The proposed nominee must furnish the Company with such other information as the Company deems necessary to determine whether the nominee can serve as an independent director of the Company, and whether the election of the nominee will jeopardize the Company’s eligibility to continue as a “foreign private issuer” under the Exchange Act.

 

B.            The requirement that any action required or permitted to be taken by the shareholders of the Company must be effected at a duly called meeting of the shareholders and may not be effected by any consent in writing by shareholders.

 

C.            The directors are required to convene a meeting of the shareholders upon the written request of shareholders holding 25% or more of the outstanding voting shares of the Company.

 

Item 15. Controls and Procedures.

 

Disclosure Controls and Procedures

 

Our management, with the participation of our chief executive officer and chief financial officer, has performed an evaluation of the effectiveness of our disclosure controls and procedures within the meaning of Rules 13a-15(e) and 15d-15(e) of the Exchange Act as of the end of the period covered by this report. Based on such evaluation, our management has concluded that, as of the end of the period covered by this annual report, our disclosure controls and procedures were effective.

 

Management’s Annual Report on Internal Control over Financial Reporting

 

Our management is responsible for establishing and maintaining adequate internal control over financial reporting, as defined under Rule 13a-15(f) and 15d-15(f) of the Securities Exchange Act of 1934. Management, under the supervision and with the participation of our chief executive officer and chief financial officer, conducted an evaluation of the effectiveness of our internal control over financial reporting based on the framework in Internal Control-Integrated Framework (2013) by the Committee on Sponsoring Organizations of the Treadway Commission (“COSO”), as supplemented by the related guidance provided in Internal Control Over Financial Reporting – Guidance for Smaller Public Companies, also issued by COSO. Based on that evaluation, our management concluded that our internal control over financial reporting was effective as of March 31, 2017.

 

  64  

 

 

This annual report does not include an attestation report of the Company’s registered public accounting firm regarding internal control over financial reporting. Management’s report was not subject to attestation by the Company’s registered public accounting firm pursuant to rules of the Securities and Exchange Commission that permit the Company to provide only management’s report in this annual report.

 

Changes in Internal Control Over Financial Reporting

 

There were no changes in the Company’s internal control over financial reporting that occurred during the period covered by this Annual Report that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.

 

Item 16. Not applicable.

 

16A. Audit Committee Financial Expert

 

The Company’s Board of Directors has determined that Ms. Irene Wong Ping Yim of the Audit Committee qualifies as an “audit committee financial expert” as defined by Item 401(h) of Regulation S-K, adopted pursuant to the Securities Exchange Act of 1934. Ms. Wong is an “independent” director, as defined under the Nasdaq Stock Market’s listing standards. For more than ten years, Ms. Wong has been the Chief Accountant of CNIM HK Ltd. in Hong Kong. Ms. Wong holds a Master of Business Administration from Deakin University. From 1994 to 2001 was the Accounting Manager of Highway Holdings. In addition, each of the other members of the audit committee has extensive financial and business experience as presidents, chief operating officers, and directors of various public and private enterprises.

 

All of the members of the audit committee are independent non-executive directors.

 

16B. Code of Ethics

 

The Company has adopted a Code of Ethics for the Chief Executive Officer and Chief Financial Officer, which applies to the Company’s principal executive officer and to its principal financial and accounting officers. A copy of the Code of Ethics is attached as Exhibit 11.1. Shareholders can also obtain a copy of the Code of Ethics from:

 

Highway Holdings Limited
Suite 1801, Level 18, Landmark North
39 Lung Sum Avenue
Sheung Shui
New Territories, Hong Kong

 

Attn: Chief Financial Officer

 

16C. Principal Accountant Fees and Services

 

Deloitte Touche Tohmatsu served as our independent registered public accounting firm as of and for each of the two fiscal years in the period ended March 31, 2017, for which audited consolidated financial statements appear in this annual report on Form 20-F.

 

  65  

 

 

The following table presents the aggregate fees for professional services and other services rendered by Deloitte Touche Tohmatsu to the Company in the fiscal year ended March 31, 2017 and 2016.

 

    2017     2016  
Audit Fees (1)   $ 251,000     $ 253,000  
Tax Fees (2)     -       7,900  
Total   $ 251,000     $ 260,900  

 

 

(1) Audit fees represent fees for professional services provided in connection with the audit of the Company’s consolidated financial statements, and audit services provided in connection with other statutory or regulatory filings.
(2) Tax Fees include fees for the preparation of tax returns.

 

As part of is policies and procedures, all audit related services, tax services and other services rendered by Deloitte Touche Tohmatsu were pre-approved by the Audit Committee.

 

16D. Exemptions from the Listing Standards for Audit Committees

 

Not applicable

 

16E. Purchases of Equity Securities by the Issuer and Affiliated Purchasers

 

Not applicable

 

16F. Change in Registrant’s Certifying Accountant

 

Not applicable

 

16G. Corporate Governance

 

The rules of the Nasdaq Capital Market provide that foreign private issuers may follow home country practices in lieu of the Nasdaq corporate governance requirements, subject to certain exceptions and requirements and except to the extent that such exemptions would be contrary to U.S. federal securities laws and regulations. The Company has chosen to comply with the Nasdaq corporate governance rules as though it was a U.S. company. Accordingly, the Company does not believe there are any significant differences between the Company’s corporate governance practices and those followed by U.S. companies under the rules of the Nasdaq Capital Market.

 

16H. Mine Safety Disclosure

 

Not applicable.

 

PART III  

 

Item 17. Financial statements.

 

The Company has elected to provide financial statements pursuant to Item 18.

 

  66  

 

 

Item 18. Financial statements.

 

See the Index to Consolidated Financial Statements accompanying this report beginning page F-1.

 

Item 19. Exhibits.

 

The following exhibits are filed as part of this annual report:

 

1.1 Memorandum and Articles of Association, as amended, of Highway Holdings Limited (incorporated by reference to Exhibit 1.1 of registrant’s Form 20-F for the fiscal year ended March 31, 2001.)

 

1.2 Amendment to Memorandum and Articles of Association, as filed on January 20, 2003 (incorporated by reference to Exhibit 1.2 of registrant’s Form 20-F for the fiscal year ended March 31, 2002.)

 

1.3 Form of Amendment to Articles of Association (incorporated by reference to Exhibit 1.3 of registrant’s Form 20-F for the fiscal year ended March 31, 2006.)

 

1.4 Form of Amendment to Articles of Association (incorporated by reference to the registrant’s Annual Report on Form 20-F for the fiscal year ended March 31, 2013.)

 

1.5 Form of Amendment to Articles of Association (incorporated by reference to the registrant’s Report of Foreign Issuer on Form S-K filed with the Commission on September 30, 2015.)

 

4.1 [RESERVED]

 

4.2 Form of Longcheng Industrial Area Common Property Tenancy Contract No. WJ-003, dated October 10, 2003, between the Company and Shenzhen Land & Sun Industrial & Trade Co., Ltd. (incorporated by reference to the registrant’s Annual Report on Form 20-F for the fiscal year ended March 31, 2004).#

 

4.3 Form of Longcheng Industrial Area Common Property Tenancy Contract No. WJ-004, dated November 28, 2003, between the Company and Shenzhen Land & Sun Industrial & Trade Co., Ltd. (incorporated by reference to the registrant’s Annual Report on Form 20-F for the fiscal year ended March 31, 2004).#

 

4.4 Form of Longcheng Industrial Area Common Property Tenancy Contract No. WJ-005, dated December 11, 2003, between the Company and Shenzhen Land & Sun Industrial & Trade Co., Ltd. (incorporated by reference to the registrant’s Annual Report on Form 20-F for the fiscal year ended March 31, 2004).#

 

4.5 Form of Longcheng Industrial Area Common Property Tenancy Contract No. HTHT-006, dated December 12, 2003, between the Company and Shenzhen Land & Sun Industrial & Trade Co., Ltd. (incorporated by reference to the registrant’s Annual Report on Form 20-F for the fiscal year ended March 31, 2004).#

 

  67  

 

 

4.6 Form of Longcheng Industrial Area Common Property Tenancy Contract, dated December 29, 2003, between the Company and Shenzhen Land & Sun Industrial & Trade Co., Ltd. (incorporated by reference to the registrant’s Annual Report on Form 20-F for the fiscal year ended March 31, 2004).#

 

4.7 Tenancy Agreement, dated October 30, 2003, between Nissin Precision Metal Manufacturing Limited and SHK Sheung Shui Landmark Investment Limited, as amended February 23, 2004 (incorporated by reference to the registrant’s Annual Report on Form 20-F for the fiscal year ended March 31, 2005).#

 

4.8 Form of Extension Agreement, dated January 26, 2005, between Shenzhen Long Cheng Nissin Precision Metal Plastic Factory and Nissin Precision Metal Manufacturing Limited (incorporated by reference to the registrant’s Annual Report on Form 20-F for the fiscal year ended March 31, 2005).#

 

4.9 Form of Extension Agreement, dated January 26, 2005, between Bao An District Long Cheng Hi-Lite Electronic Factory and Hi-Lite Camera Company Limited (incorporated by reference to the registrant’s Annual Report on Form 20-F for the fiscal year ended March 31, 2005).#

 

4.10 [RESERVED]

 

4.11 [RESERVED]

 

4.12 Form of Longcheng Industrial Area Common Property Tenancy Contract No. WJ-002, dated July 4, 2003, between the Company and Shenzhen Land & Sun Industrial & Trade Co., Ltd. (incorporated by reference to the registrant’s Annual Report on Form 20-F for the fiscal year ended March 31, 2006)#

 

4.13 Tenancy Renewal, dated March 10, 2006, between Nissin Precision Metal Manufacturing Limited and SHK Sheung Shui Landmark Investment Limited. (incorporated by reference to the registrant’s Annual Report on Form 20-F for the fiscal year ended March 31, 2006)#

 

4.14 Tenancy Renewal, dated June 13, 2008, between Nissin Precision Metal Manufacturing Limited and SHK Sheung Shui Landmark Investment Limited regarding Unit 810, Level 8, Landmark North, New Territories. (incorporated by reference to the registrant’s Annual Report on Form 20-F for the fiscal year ended March 31, 2008)#

 

4.15 Form of Longcheng Industrial Area Common Property Tenancy Contract No. WJ-002, dated July 4, 2008, between the Company and Shenzhen Land & Sun Industrial & Trade Co., Ltd. (incorporated by reference to the registrant’s Annual Report on Form 20-F for the fiscal year ended March 31, 2009)#

 

4.16 2010 Stock Option And Restricted Stock Plan (incorporated by reference to the registrant’s Annual Report on Form 20-F for the fiscal year ended March 31, 2010)

 

  68  

 

 

4.17 Tenancy Agreement of Office No. 1801 on Level of Landmark North, Hong Kong, dated 8 th day of June, 2011, between Golden Bright Plastic Manufacturing Company Limited and SHK Sheung Shui Landmark Investment Limited (incorporated by reference to the registrant’s Annual Report on Form 20-F for the fiscal year ended March 31, 2011)#

 

4.18 Tenancy Agreement of Office No. 1823-1823A on Level of Landmark North, Hong Kong, dated 8 th day of June, 2011, between Kayser Limited and SHK Sheung Shui Landmark Investment Limited (incorporated by reference to the registrant’s Annual Report on Form 20-F for the fiscal year ended March 31, 2011)#

 

4.19 Long Cheng Industrial Zone General Estate Rental Contract, dated November 25, 2011, between Shenzhen Long Cheng Industry & Trade Industrial Ltd. and Nissin Metal Plastic (Shenzhen) Limited (incorporated by reference to the registrant’s Annual Report on Form 20-F for the fiscal year ended March 31, 2012)#

 

4.20 Long Cheng Industrial Zone General Estate Rental Contract, dated November 25, 2011, between Shenzhen Long Cheng Industry & Trade Industrial Ltd. and Shenzhen Dalong Boa An Long Cheng Hi-Lite Electricity Factory (incorporated by reference to the registrant’s Annual Report on Form 20-F for the fiscal year ended March 31, 2012)#

 

4.21 Long Cheng Industrial Zone General Estate Rental Agreement between Shenzhen Long Cheng Industry & Trade Industrial Ltd. and Nissin Metal and Plastic (Shenzhen) Limited, dated July 13, 2012 (incorporated by reference to the registrant’s Annual Report on Form 20-F for the fiscal year ended March 31, 2013)#

 

4.22 Long Cheng Industrial Zone General Estate Rental Agreement between Shenzhen Long Cheng Industry & Trade Industrial Ltd. and Shenzhen Dalong Bao An Long Cheng Hi-Lite Electronic Factory, dated July 13, 2012 (incorporated by reference to the registrant’s Annual Report on Form 20-F for the fiscal year ended March 31, 2013)#

 

4.23 Tenancy Agreement of Office No. 1823-1823A on Level 18 of Landmark North, Hong Kong, dated 16 th day of April, 2014, between Kayser Limited and SHK Sheung Shui Landmark Investment Limited (incorporated by reference to the registrant’s Annual Report on Form 20-F for the fiscal year ended March 31, 2015)

 

4.24 Tenancy Agreement of Office No. 1801 on Level 18 of Landmark North, Hong Kong, dated 16 th day of April, 2014, between Nissin Precision Metal Manufacturing Limited and SHK Sheung Shui Landmark Investment Limited (incorporated by reference to the registrant’s Annual Report on Form 20-F for the fiscal year ended March 31, 2015)

 

4.25 Long Cheung Industrial Zone General Estate Rental Agreement between Shenzhen Long Cheng Industry Trade industrial Limited and Nissin Metal and Plastic (Shenzhen) Limited dated 18 July 2016.*

 

4.26 Tenancy agreement for the Myanmar factory in Yangon between Kayser Myanmar Manufacturing Company Limited and U Khin Hla dated 17 th August 2016.

 

  69  

 

 

4.27 Tenancy Agreement Office No. 1823-1823A on level 18 of Landmark North, Hong Kong dated 21st March 2017 between Kayser Limited and SHK Sheung Shui Landmark Investment Limited dated 21st March 2017.*

 

4.28 Tenancy Agreement Office No. 1801 on Level 18 of Landmark North, Hong Kong, dated 21st March 2017 between Nissin Precision Metal Manufacturing Limited and SHK Sheung Shui Landmark investment Limited dated 21 st March 2017. *

 

8.1 List of all of registrant’s subsidiaries, their jurisdictions of incorporation, and the names under which they do business.*

 

11.1 Code of Ethics (incorporated by reference to the registrant’s Annual Report on Form 20-F for the fiscal year ended March 31, 2005)

 

12.1 Certifications pursuant to Section 1350, as adopted pursuant to Section 302 of the Sarbanes-Oxley Act of 2002*

 

12.2 Certifications pursuant to Section 1350, as adopted pursuant to Section 302 of the Sarbanes-Oxley Act of 2002*

 

13.1 Certifications pursuant to Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002*

 

13.2 Certification pursuant to Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002 *

 

101 Financial information from registrant for the year ended March 31, 2015 formatted in eXtensible Business Reporting Language (XBRL):

 

(i) Consolidated Balance Sheets as of March 31, 2016 and 2017; (ii) Consolidated Statements of Operations for the Years Ended March 31, 2015, 2016 and 2017; (iii) Consolidated Statements of Changes in Equity and Comprehensive Income (Loss) for the Years Ended March 31, 2015, 2016 and 2017; (iv) Consolidated Statements of Cash Flows for the Years Ended March 31, 2015, 2016 and 2017; (v) Notes to the Consolidated Financial Statements; and (vi) Additional Information - Financial Statement Schedule I

 

 

 

* Filed herewith
# The agreement is written in Chinese and an English Translation is provided in accordance with Form 20-F Instructions to Exhibits and Rule 12b-12(d) under the Exchange Act).

 

  70  

 

 

SIGNATURES

 

The registrant hereby certifies that it meets all of the requirements for filing on Form 20-F and has duly caused this Annual Report to be signed on its behalf.

 

  HIGHWAY HOLDINGS LIMITED
     
  By /s/ALAN CHAN
    Alan Chan
   

Chief Financial Officer and Secretary

     
  Date: June 29, 2017

 

 

 

 

  HIGHWAY HOLDINGS LIMITED
   
  Consolidated Financial Statements
  For the years ended March 31, 2015, 2016 and 2017
  Report of Independent Registered Public Accounting Firm

 

 

 

 

HIGHWAY HOLDINGS LIMITED

 

INDEX TO CONSOLIDATED FINANCIAL STATEMENTS

 

  Page
   
Report of Independent Registered Public Accounting Firm F - 2
   
Consolidated Statements of Operations for the Years Ended March 31, 2015, 2016 and 2017 F - 3
   
Consolidated Statements of Comprehensive Income for the Years Ended March 31, 2015, 2016 and 2017 F - 4
   
Consolidated Balance Sheets as of March 31, 2016 and 2017 F - 5
   
Consolidated Statements of Changes in Equity for the Years Ended March 31, 2015, 2016 and 2017 F - 6
   
Consolidated Statements of Cash Flows for the Years Ended March 31, 2015, 2016 and 2017 F - 7
   
Notes to the Consolidated Financial Statements F - 8

 

  F - 1  

 

 

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

 

To the Board of Directors and Shareholders of Highway Holdings Limited:

 

We have audited the accompanying consolidated balance sheets of Highway Holdings Limited and its subsidiaries (the “Group”) as of March 31, 2016 and 2017, and the related consolidated statements of operations, comprehensive income, changes in equity, and cash flows for each of the three years in the period ended March 31, 2017. These consolidated financial statements are the responsibility of the Group's management. Our responsibility is to express an opinion on these consolidated financial statements based on our audits.

 

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. The Group is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. Our audits included consideration of internal control over financial reporting as a basis for designing audit procedures that are appropriate in the circumstances, but not for the purpose of expressing an opinion on the effectiveness of the Group's internal control over financial reporting. Accordingly, we express no such opinion. An audit also includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

 

In our opinion, such consolidated financial statements present fairly, in all material respects, the financial position of Highway Holdings Limited and its subsidiaries as of March 31, 2016 and 2017, and the results of their operations and their cash flows for each of the three years in the period ended March 31, 2017, in conformity with accounting principles generally accepted in the United States of America.

 

 

/s/ Deloitte Touche Tohmatsu

Deloitte Touche Tohmatsu

Hong Kong

29 June 2017

 

  F - 2  

 

 

HIGHWAY HOLDINGS LIMITED

 

CONSOLIDATED STATEMENTS OF OPERATIONS

(In thousands of U.S. dollars, except for shares and per share data)

 

    Year ended March 31,  
    2015     2016     2017  
    $     $     $  
                   
Net sales     22,373       22,935       19,603  
Cost of sales     (16,656 )     (17,007 )     (14,033 )
                         
Gross profit     5,717       5,928       5,570  
Selling, general and administrative expenses     (4,446 )     (4,412 )     (4,809 )
                         
Operating income     1,271       1,516       761  
                         
Non-operating income (expense):                        
Exchange loss, net     (125 )     (21 )     (19 )
Interest income     18       10       8  
Other income     3       2       11  
Gain on disposal of property, plant and equipment     110       -       -  
                         
Total non-operating income (expense)     6       (9 )     -  
                         
Income before income taxes     1,277       1,507       761  
Income taxes (note 3)     (134 )     (243 )     (236 )
                         
Net income     1,143       1,264       525  
Net loss (profit) attributable to non-controlling interests     7       (13 )     2  
                         
Net income attributable to Highway Holdings Limited's shareholders     1,150       1,251       527  
                         
Net income per share:                        
- basic     0.30       0.33       0.14  
                         
- diluted     0.30       0.33       0.14  
                         
Weighted average number of shares outstanding:                        
- basic     3,786,542       3,801,874       3,801,874  
                         
- diluted     3,794,801       3,801,874       3,801,874  

 

The accompanying notes are an integral part to these consolidated financial statements.

 

  F - 3  

 

 

HIGHWAY HOLDINGS LIMITED

 

CONSOLIDATED STATEMENTS OF COMPREHENSIVE INCOME

(In thousands of U.S. dollars, except for shares and per share data)

 

    Year ended March 31,  
    2015     2016     2017  
    $     $     $  
                   
Net income     1,143       1,264       525  
Other comprehensive income (loss), net of tax:                        
Change in cumulative foreign currency translation adjustment     1       (42 )     (102 )
Comprehensive income     1,144       1,222       423  
Comprehensive loss (income) attributable to non-controlling interest     7       (13 )     2  
Comprehensive income attributable to Highway Holdings Limited's shareholders     1,151       1,209       425  

 

The accompanying notes are an integral part to these consolidated financial statements.

 

  F - 4  

 

 

HIGHWAY HOLDINGS LIMITED

 

CONSOLIDATED BALANCE SHEETS

(In thousands of U.S. dollars, except for shares and per share data)

 

    As of March 31,  
    2016     2017  
    $     $  
ASSETS                
Current assets:                
Cash and cash equivalents     9,140       10,028  
Accounts receivable, net of allowances for doubtful accounts of $6 and $66 as of March 31, 2016 and 2017, respectively     4,321       3,403  
Inventories (note 4)     1,425       2,265  
Prepaid expenses and other current assets     844       714  
                 
Total current assets     15,730       16,410  
Goodwill (note 16)     77       77  
Property, plant and equipment, net (note 5)     1,121       954  
Long-term deposits     111       111  
Investments in equity method investees (note 6)     -       -  
                 
TOTAL ASSETS     17,039       17,552  
                 
LIABILITIES AND EQUITY                
Current liabilities:                
Accounts payable     1,307       2,391  
Accrued expenses and other current liabilities (note 7)     2,789       3,053  
Income tax payable     440       328  
Dividend payable     537       438  
                 
Total current liabilities     5,073       6,210  
Deferred income taxes (note 3)     32       32  
                 
Total liabilities     5,105       6,242  
                 
Commitments and contingencies (note 8)                
                 
Shareholders' equity:                
Common shares, $0.01 par value (Authorized: 20,000,000 shares; 3,801,874 shares as of March 31, 2016 and March 31, 2017, issued and outstanding)     38       38  
Additional paid-in capital     11,370       11,370  
Retained profits     512       13  
Treasury shares, at cost - 5,049 shares as of March 31, 2016 and 2017 (note 9)     (14 )     (14 )
Accumulated other comprehensive income     (34 )     (136 )
                 
Total Highway Holdings shareholder's equity     11,872       11,271  
                 
Non-controlling interest     62       39  
                 
Total Equity     11,934       11,310  
                 
TOTAL LIABILITIES AND EQUITY     17,039       17,552  

 

The accompanying notes are an integral part to these consolidated financial statements.

 

  F - 5  

 

 

HIGHWAY HOLDINGS LIMITED

 

CONSOLIDATED STATEMENTS OF CHANGES IN EQUITY

(In thousands of U.S. dollars, except for shares and per share data)

 

    Highway Holdings Limited's Shareholders' Equity              
                                        Total              
                                        Highway              
    Common shares,                 Accumulated           Holdings              
    issued and     Additional           other     Treasury     Limited's     Non-        
    outstanding     paid-in     Retained     comprehensive     shares,     Shareholders'     controlling     Total  
    Shares     Amount     capital     profits     (loss) income     at cost     equity     interests     equity  
    Number     $     $     $     $     $     $     $     $  
    (in thousands)                                                  
                                                       
As of March 31, 2014     3,784       38       11,340       770       7       (14 )     12,141       5       12,146  
Net income     -       -       -       1,150       -       -       1,150       (7 )     1,143  
Cash dividend ($0.30 per share)     -       -       -       (1,138 )     -       -       (1,138 )     -       (1,138 )
Exercise of share options     18       -       30       -       -       -       30       -       30  
Acquisition of a subsidiary     -       -       -       -       -       -       -       25       25  
Contribution from a non-controlling shareholder     -       -       -       -       -       -       -       26       26  
Translation adjustments     -       -       -       -       1       -       1       -       1  
                                                                         
As of March 31, 2015     3,802       38       11,370       782       8       (14 )     12,184       49       12,233  
Net income     -       -       -       1,251       -       -       1,251       13       1,264  
Cash dividend ($0.40 per share)     -       -       -       (1,521 )     -       -       (1,521 )     -       (1,521 )
Translation adjustments     -       -       -       -       (42 )     -       (42 )     -       (42 )
                                                                         
As of March 31, 2016     3,802       38       11,370       512       (34 )     (14 )     11,872       62       11,934  
Net income     -       -       -       527       -       -       527       (2 )     525  
Cash dividend ($0.27 per share)     -       -       -       (1,026 )     -       -       (1,026 )     -       (1,026 )
Acquisition of additional interests in subsidiaries     -       -       -       -       -       -       -       (21 )     (21 )
Translation adjustments     -       -       -       -       (102 )     -       (102 )     -       (102 )
                                                                         
As of March 31, 2017     3,802       38       11,370       13       (136 )     (14 )     11,271       39       11,310  

 

The accompanying notes are an integral part to these consolidated financial statements.

 

  F - 6  

 

 

HIGHWAY HOLDINGS LIMITED

 

CONSOLIDATED STATEMENTS OF CASH FLOWS

(In thousands of U.S. dollars)

 

    Year ended March 31,  
    2015     2016     2017  
    $     $     $  
Cash flows from operating activities:                        
Net income     1,143       1,264       525  
Adjustments to reconcile net income to net cash provided by operating activities:                        
Depreciation of property, plant and equipment     393       317       266  
Write down of amounts receivables     -       -       60  
Write down of inventories     80       25       41  
Write down of property, plant and equipment     -       117       -  
Deferred income taxes     (12 )     -       -  
Gain on disposal of property, plant and equipment     (110 )     -       -  
Changes in operating assets and liabilities:                        
Accounts receivable     214       (1,378 )     858  
Inventories     1,539       687       (834 )
Prepaid expenses and other assets     100       249       286  
Accounts payable     2       (291 )     1,040  
Accrued expenses and other liabilities     697       195       99  
Income tax payable     55       103       (121 )
Long-term deposits     122       (32 )     4  
                         
Net cash provided by operating activities     4,223       1,256       2,224  
                         
Investing activities:                        
Purchase of property, plant and equipment     (129 )     (524 )     (197 )
Proceeds from disposal of property, plant and equipment     110       60       -  
Acquisition of a subsidiary     (19 )     -       -  
Repayment from long-term loan receivable     184       -       -  
Release of bank pledged deposit     643       -       -  
Contribution from a non-controlling shareholder     26       -       -  
                         
Net cash provided by (used in) investing activities     815       (464 )     (197 )
                         
Financing activities:                        
Proceed from exercise of employee share options     30       -       -  
Acquisition of additional interests in a subsidiary     -       -       (9 )
Cash dividends paid     (758 )     (1,364 )     (1,126 )
                         
Net cash used in financing activities     (728 )     (1,364 )     (1,135 )
                         
Net increase (decrease) in cash and cash equivalents     4,310       (572 )     892  
Cash and cash equivalents at the beginning of year     5,416       9,727       9,140  
Effect of exchange rate changes on cash     1       (15 )     (4 )
                         
Cash and cash equivalents at the end of year     9,727       9,140       10,028  
                         
Supplemental cash flow information:                        
Interest     7       -       -  
                         
Income taxes     91       120       350  

 

The accompanying notes are an integral part to these consolidated financial statements.

 

  F - 7  

 

 

HIGHWAY HOLDINGS LIMITED

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

(In thousands of U.S. dollars, except for shares and per share data)

 

1. ORGANIZATION AND BASIS OF FINANCIAL STATEMENTS

 

Highway Holdings Limited (the “Company”) was incorporated in the British Virgin Islands on July 20, 1990. It operates through its subsidiaries operating in the Hong Kong Special Administrative Region (“Hong Kong”), Shenzhen (comprising Long Hua) of the People's Republic of China (“China”) and Yangon of the Republic of the Union of Myanmar (“Myanmar”).

 

The Company and its subsidiaries (collectively referred as the “Group”) are engaged in manufacturing and sale of metal, plastic and electronic parts and components. The Group's manufacturing activities are principally conducted in Shenzhen of China and Yangon of Myanmar, while its selling activities are principally conducted in Hong Kong.

 

2. SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES

 

(a) Principles of consolidation - The consolidated financial statements have been prepared in conformity with accounting principles generally accepted in the United States of America (“U.S. GAAP”). The consolidated financial statements include the financial statements of the Company and its subsidiaries. All intercompany transactions and balances have been eliminated on consolidation. The results of subsidiaries acquired have been consolidated from the date of acquisition.

 

(b) Investments under equity method - The investments for which the Group has the ability to exercise significant influence are accounted for under the equity method. Under the equity method, original investments are recorded at cost and adjusted by the Group's share of undistributed earnings or losses of these entities, the amortization of intangible assets recognized upon purchase price allocation and dividend distributions or subsequent investments. All unrecognized inter-company profits and losses have been eliminated under the equity method.

 

When the estimated amount to be realized from the investments falls below its carrying value, an impairment charge is recognized in the consolidated statements of operations when the decline in value is considered other than temporary.

 

(c) Cash and cash equivalents - Cash and cash equivalents consist of cash on hand, demand deposits, highly liquid investments which are unrestricted as to withdrawal and use, and which have maturities of three months or less when purchased, and are readily convertible to known amount of cash.

 

Cash equivalents are placed with financial institutions with high credit ratings and quality.

 

  F - 8  

 

 

HIGHWAY HOLDINGS LIMITED

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS – continued

(In thousands of U.S. dollars, except for shares and per share data)

 

2. SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES – continued

 

(d) Accounts receivable - Accounts receivable primarily represent amounts due from customers, that are typically non-interest bearing and are initially recorded at invoiced amount. The Group reviews its accounts receivable on a periodic basis and records allowances when there is a doubt as to the collectability of the balance. In evaluating the collectability of the accounts receivable balances, the Group considers various factors, including the age of the balance, customer specific facts and economic conditions. Accounts receivable balances are charged off against the allowance after all means of collection have been exhausted and the potential for recovery is considered remote. The Group does not have any off-balance-sheet credit exposure related to its customers.

 

(e) Inventories - Inventories are stated at the lower of cost determined by the first in first out method, or market value. Work-in-progress and finished goods consist of raw materials, direct labour and overheads associated with the manufacturing process. Write down of potential obsolete or slow moving inventories is recorded based on management's assumptions about future demands and market conditions.

 

(f) Goodwill - Goodwill is the excess of the consideration transferred over the fair value of the acquired assets and assumed liabilities in a business combination. Goodwill is not amortized but rather tested for impairment at least annually. The Company test goodwill for impairment in March of each fiscal year. Goodwill is also tested for impairment between annual tests if an event occurs or circumstances change that would more likely than not reduce the fair value of the reporting unit below its carrying amount. Specifically, goodwill impairment is determined using a two-step process. The first step compares the fair value of each reporting unit to its carrying amount, including goodwill. If the fair value of each reporting unit exceeds its carrying amount, goodwill is not considered to be impaired and the second step will not be required. If the carrying amount of a reporting unit exceeds its fair value, the second step compares the implied fair value of the affected reporting unit's goodwill to the carrying value of that goodwill. The implied fair value of goodwill is determined in a manner similar to accounting for a business combination with the allocation of the assessed fair value determined in the first step to the assets and liabilities of the reporting unit. The excess of the fair value of the reporting unit over the amounts assigned to the assets and liabilities is the implied fair value of goodwill. An impairment loss is recognized for any excess in the carrying value of goodwill over the implied fair value of goodwill. Estimating fair value is performed by utilizing various valuation techniques, with the primary technique being a discounted cash flow. Impairment testing for goodwill is done at the reporting unit level. A reporting unit is an operating segment or one level below an operating segment (also known as a component).

 

  F - 9  

 

 

HIGHWAY HOLDINGS LIMITED

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS – continued

(In thousands of U.S. dollars, except for shares and per share data)

 

2. SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES – continued

 

(g) Property, plant and equipment - Property, plant and equipment are stated at cost less accumulated depreciation and impairment losses, if any. Depreciation is computed on a straight line basis over the estimated useful lives of 10 years for machinery and equipment and 2 to 5 years for other property, plant and equipment.

 

(h) Impairment or disposal of long-lives assets - The Group reviews its long-lived assets for impairment whenever events or changes in circumstances indicate that the carrying amount of an asset may no longer be recoverable. When these events occur, the Group measures impairment by comparing the carrying value of the long-lived assets to the estimated undiscounted future cash flows expected to result from the use of the assets and their eventual disposition. If the sum of the expected undiscounted cash flow were to be less than the carrying amount of the assets, the Group would recognize an impairment loss based on the fair value of the assets.

 

No impairment expenses are recognized for long-lived assets during the years ended March 31, 2015, 2016 and 2017.

 

(i) Concentration of credit risk - Financial instruments that potentially expose the Group to concentration of credit risk consist primarily of cash and equivalents and accounts receivable. The Group places its cash and cash equivalents with financial institutions with high credit ratings and quality.

 

The risks with respect to accounts receivables are mitigated by credit evaluations performed on the customers or debtors and ongoing monitoring of outstanding balances. The Group establishes an allowance for doubtful accounts based upon estimates, factors surrounding the credit risk of specific customers and other information. Accounts receivable are charged against the allowance after all means of collection have been exhausted and the potential for recovery is considered remote. The accounts receivable from customers with individual balances over 10% of the accounts receivable represent 78%, 70% and 73% of the balances of accounts receivable as of March 31, 2015, 2016 and 2017, respectively.

 

(j) Revenue recognition - The Group recognizes revenue from the sale of products, when all of the following conditions are met:

 

· Persuasive evidence of an arrangement exists;
· Delivery has occurred;
· Price to the customer is fixed or determinable; and
· Collectability is reasonably assured.

 

  F - 10  

 

 

HIGHWAY HOLDINGS LIMITED

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS – continued

(In thousands of U.S. dollars, except for shares and per share data)

 

2. SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES – continued

 

Revenue from sales of products is recognized when the title is passed to customers upon shipment and when collectability is reasonably assured. The Group does not provide its customers with the right of return (except for quality) or price protection. There are no customer acceptance provisions associated with the Group's products. All sales are based on firm customer orders with fixed terms and conditions, which generally cannot be modified.

 

(k) Staff retirement plan costs - The Group's costs related to the staff retirement plans (see note 12) are charged to the consolidated statement of operations as incurred.

 

(l) Foreign currency translations and transactions - The functional and reporting currency of the Company is the United States Dollars (“U.S. dollars”). All transactions in currencies other than functional currencies of the Company during the year are remeasured at the exchange rates prevailing on the respective transaction dates. Monetary assets and liabilities existing at the balance sheet date denominated in currencies other than functional currencies are remeasured at the exchange rates on that date. Exchange differences are recorded in the consolidated statements of operations.

 

The books and records of the Company's major subsidiaries are maintained in their respective local currencies, the Hong Kong dollars or Renminbi, which are also their respective functional currencies. All assets and liabilities are translated at the rates of exchange prevailing at the balance sheet date and all income and expense items are translated at the average rates of exchange over the year. All exchange differences arising from the translation of subsidiaries' financial statements are recorded as a component of comprehensive income (loss).

 

(m) Income taxes - Deferred tax assets and liabilities are determined based on the difference between the financial reporting and tax bases of assets and liabilities, and operating loss and tax credit carryforwards using enacted tax rates that will be in effect for the period in which the differences are expected to reverse. The Group records a valuation allowance against the amount of deferred tax assets that it determines is not more likely than not of being realized. The effect on deferred taxes of a change in tax rates is recognized in income in the period that includes the enactment date.

 

The Group recognizes the effect of income tax positions only if those positions are more likely than not of being sustained. Recognized income tax positions are measured at the largest amount that is greater than 50% likely of being realized. Changes in recognition or measurement are reflected in the period in which the change in judgment occurs. The Group records interest related to unrecognized tax benefits and penalties, if any, within income tax benefits (expenses).

 

  F - 11  

 

 

HIGHWAY HOLDINGS LIMITED

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS – continued

(In thousands of U.S. dollars, except for shares and per share data)

 

2. SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES – continued

 

(n) Use of estimates - The preparation of financial statements in conformity with U.S. GAAP requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities as of the date of the financial statements and the reported amounts of revenues and expenses for the periods presented. Actual results could differ from those estimates. The significant accounting estimate, which has had an impact on the consolidated financial statements, includes allowances for doubtful receivables.

 

(o) Stock-based compensation - The Group has a stock-based employee compensation plan, as be more fully described in note 13. The Group measures the cost of employee services received in exchange for an award of equity instruments based on the grant-date fair value of the award. That cost is recognized over the period during which an employee is required to provide service, the requisite service period (usually the vesting period), in exchange for the award. The grant-date fair value of employee stock options and similar instruments are estimated using Black-Scholes option-pricing model.

 

(p) Operating leases - Leases in which substantially all the rewards and risks of ownership of assets remain with the lessor are accounted for as operating leases. Payments made under operating leases are charged to the consolidated statement of operations on a straight-line basis over the lease periods.

 

(q) Net income per share - Basic net income per share is computed by dividing net income attributable to the Company by the weighted average number of common shares outstanding during the year. Diluted net income attributable to the Company per share give effect to all dilutive potential common shares outstanding during the year. The weighted average number of common shares outstanding is adjusted to include the number of additional common shares that would have been outstanding if the dilutive potential common shares had been issued.

 

(r) Comprehensive (loss) income - Comprehensive (loss) income includes net (loss) income and foreign currency translation adjustments and is presented net of tax, the amounts of $1, $(42) and $(102) for the years ended March 31, 2015, 2016 and 2017, respectively.

 

The Group presents the components of net income, the components of other comprehensive (loss) income and total comprehensive income in two separate but consecutive statements.

 

(s) Fair value measurement and financial instruments - The Group applies a fair value hierarchy that requires an entity to maximize the use of observable inputs and minimize the use of unobservable inputs when measuring fair value. A financial instrument's categorization within the fair value hierarchy is based upon the lowest level of input that is significant to the fair value measurement. Under this hierarchy, there are three levels of inputs that may be used to measure fair value:

 

  F - 12  

 

 

HIGHWAY HOLDINGS LIMITED

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS – continued

(In thousands of U.S. dollars, except for shares and per share data)

 

2. SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES – continued

 

· Level 1 applies to assets or liabilities for which there are quoted prices in active markets for identical assets or liabilities.
· Level 2 applies to assets or liabilities for which there are inputs other than quoted prices included within Level 1 that are observable for the asset or liability such as quoted prices for similar assets or liabilities in active markets; quoted prices for identical asset or liabilities in markets with insufficient volume or infrequent transactions (less active markets); or model-derived valuations in which significant inputs are observable or can be derived principally from, or corroborated by, observable market data.
· Level 3 applies to asset or liabilities for which there are unobservable inputs to the valuation methodology that are significant to the measurement of the fair value of the assets or liabilities.

 

Determining which category an asset or liability falls within the hierarchy requires significant judgment.

 

The Group did not have any financial instruments that were required to be measured at fair value on a recurring basis as of March 31, 2016 and 2017. As of March 31, 2016 and 2017, the Group did not have any nonfinancial assets and liabilities that are recognized or disclosed at fair value in the financial statements, at least annually, on a recurring basis, nor did the Group have any assets or liabilities measured at fair value on a non-recurring basis.

 

The carrying amounts of financial instruments, which consist of cash and cash equivalents, accounts receivable, other current assets, accounts payable and other liabilities approximate their fair values due to the short term nature of these instruments.

 

(t) Non-controlling interest - Non-controlling interest have been reported as a component of equity in the consolidated balance sheets and consolidated statements of changes of equity and comprehensive income for all periods presented.

 

(u) Recent Changes in Accounting Standards - In June 2014, the Financial Accounting Standards Board (“FASB”) issued an accounting standard update which requires that a performance target that affects vesting and that could be achieved after the requisite service period be treated as a performance condition. As such, the performance target should not be reflected in estimating the grant date fair value of the award. This update further clarifies that compensation cost should be recognized in the period in which it becomes probable that the performance target will be achieved and should represent the compensation cost attributable to the period(s) for which the requisite service has already been rendered. The adoption of this guidance was effective for the Group as of April 1, 2016 and did not have a material impact on the Group's consolidated financial statements.

 

  F - 13  

 

 

HIGHWAY HOLDINGS LIMITED

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS – continued

(In thousands of U.S. dollars, except for shares and per share data)

 

2. SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES – continued

 

(v) Recent issued accounting standards not yet adopted - In May 2014, the FASB issued an accounting standard update which outlines a single comprehensive model for entities to use in accounting for revenue arising from contracts with customers and supersedes most current revenue recognition guidance, including industry-specific guidance. The core principal of this new revenue recognition model is that an entity should recognize revenue to depict the transfer of promised goods or services to customers in an amount that reflects the consideration for which the entity expects to be entitled in exchange for those goods or services. This update also requires enhanced disclosures regarding the nature, amount, timing, and uncertainty of revenue and cash flows arising from an entity's contracts with customers. In August 2015, the FASB issued an accounting standard update which defers the effective date of the new revenue recognition accounting guidance by one year, to annual and interim periods beginning after December 15, 2017, and early adoption is permitted for annual and interim periods beginning after December 15, 2016. From March 2016 through May 2016, the FASB issued accounting standard updates which amend and further clarify the new revenue guidance such as reporting revenue as a principal versus agent, identifying performance obligations, accounting for intellectual property licenses, assessing collectability and presentation of sales taxes. The guidance can be applied either retrospectively to each period presented or as a cumulative-effect adjustment as of the date of adoption. The Group will apply a cumulative-effect adjustment as of the date of adoption. Based on the management assessment of the application of this guidance, the Group does not expect a material impact on amounts reported and disclosures made in the Group’s consolidated financial statements.

 

In July 2015, the FASB issued an accounting standard update, which changes the measurement principle for inventories that is measured using other than last-in, first-out or the retail inventory method from the lower of cost or market to the lower of cost and net realizable value. Net realizable value is defined by FASB as estimated selling prices in the ordinary course of business, less reasonably predictable costs of completion, disposal and transportation. The guidance is effective for interim and fiscals years beginning after December 15, 2016, with early adoption permitted. The guidance should be applied prospectively. The adoption of this guidance is not expected to have a material impact on the Group's consolidated financial statements.

 

  F - 14  

 

 

HIGHWAY HOLDINGS LIMITED

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS – continued

(In thousands of U.S. dollars, except for shares and per share data)

 

2. SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES – continued

 

In November 2015, the FASB issued an accounting standard update which simplifies balance sheet classification of deferred taxes. The guidance requires that all deferred tax assets and liabilities, along with any related valuation allowance, be classified as noncurrent. The guidance is effective for interim and fiscals years beginning after December 15, 2016, with early adoption permitted. The guidance can be applied either prospectively to all deferred tax liabilities and assets or retrospectively to all periods presented. The adoption of this guidance is not expected to have a material impact on the Group's consolidated financial statements.

 

In January 2016, the FASB issued an accounting standard update which improves certain aspects of recognition, measurement, presentation, and disclosure of financial instruments. The guidance changes the measurement of investments in equity securities and the presentation of certain fair value changes for financial liabilities measured at fair value, and also amends certain disclosure requirements associated with the fair value of financial instruments. The guidance is effective for interim and fiscals years beginning after December 15, 2017, with early adoption permitted for certain changes. The guidance should be applied as a cumulative-effect adjustment as of the date of adoption, except for the guidance related to equity securities without readily determinable fair values should be applied prospectively. The adoption of this guidance is not expected to have a material impact on the Group's consolidated financial statements.

 

In February 2016, the FASB issued an accounting standard update on leases, which amends various aspects of existing accounting guidance for leases. The guidance requires all lessees to recognize a lease liability and a right-of-use asset, measured at the present value of the future minimum lease payments, at the lease commencement date. Lessor accounting remains largely unchanged under the new guidance. The guidance is effective for interim and fiscals years beginning after December 15, 2018, with early adoption permitted. Management is currently assessing the potential impact of adopting this guidance on the Group's consolidated financial statements.

 

In August 2016, the FASB issued an accounting standard update which amends the guidance on the classification of certain cash receipts and payments in the statement of cash flows. The guidance is effective for interim and fiscal years beginning after December 15, 2017, with early adoption is permitted. The guidance should be applied retrospectively. The adoption of this guidance is not expected to have a material impact on the Group's consolidated financial statements.

 

  F - 15  

 

 

 

HIGHWAY HOLDINGS LIMITED

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS – continued

(In thousands of U.S. dollars, except for shares and per share data)

 

2. SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES – continued

 

In January 2017, the FASB issued an accounting standard update which eliminates step two from the goodwill impairment test and instead requires an entity to recognize an impairment charge for the amount by which the carrying value exceeds the reporting unit's fair value, limited to the total amount of goodwill allocated to that reporting unit. This guidance is effective for interim and fiscals years beginning after December 15, 2019, with early adoption permitted. The guidance should be applied prospectively. Management is currently assessing the potential impact of adopting this guidance on the Group's consolidated financial statements. The adoption of this guidance would only impact the Group's consolidated financial statements in situations where an impairment of a reporting unit's assets is determined and the measurement of the impairment charge.

 

3. INCOME TAXES

 

Income is subject to tax in the various countries in which the Group operates.

 

No income tax arose in the United States of America in any of the periods presented.

 

The Company is not taxed in the British Virgin Islands.

 

The Group's operating subsidiaries, other than Nissin Metal and Plastic (Shenzhen) Company Limited (“Nissin Shenzhen”) and Kayser Myanmar, are all incorporated in Hong Kong and are subject to Hong Kong taxation on income derived from their activities conducted in Hong Kong. Hong Kong Profits Tax has been calculated at 16.5% of the estimated assessable profit for the years ended March 31, 2015, 2016 and 2017.

 

Nissin Shenzhen, which is established and operated in China, is subject to the uniform income tax rate of 25% in China.

 

The Group's manufacturing operations were conducted mainly in Long Hua, Shenzhen and Yangon of Myanmar during the years ended March 31, 2015, 2016 and 2017. However, Kayser Myanmar enjoyed a tax exemption for the year ended March 31, 2016 until the end of December, 2017, as a result, no tax expense is noted in Yangon of Myanmar.

 

The manufacturing operations of Hi-Lite Camera Company Limited (“Hi-lite”) in Long Hua, Shenzhen was conducted pursuant to agreement entered into between certain China companies set up by the local government and the Shenzhen City Baoan District Foreign Economic Development Head Group and its designees (collectively, the “BFDC”) (the agreement, collectively the “BFDC Agreement”).

 

  F - 16  

 

 

HIGHWAY HOLDINGS LIMITED

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS – continued

(In thousands of U.S. dollars, except for shares and per share data)

 

3. INCOME TAXES – continued

 

Under the BFDC Agreement, the Group (excluding Nissin Shenzhen) was not considered by local tax authorities to be doing business in China; accordingly, the activities of the Group (excluding Nissin Shenzhen) in China had not been subject to local taxes. The BFDC was responsible for paying taxes they incur as a result of the operation under the BFDC Agreement.

 

In April 2015, Hi-lite has ceased operating under the BFDC Agreement. All the Group's operations in China in the future will be conducted through Nissin Shenzhen. The BFDC Agreement in Long Hua and the sub-contracting license of Hi-lite also expired in March 2016.

 

As part of the manufacturing operations of the Group (excluding Nissin Shenzhen) were carried out in China under the BFDC Agreement, in accordance with the Hong Kong Inland Revenue Departmental Interpretation and Practice Note No. 21 (DIPN 21), 50% of the related income for the year arising in Hong Kong was not subject to Hong Kong profits tax. The calculation of Hong Kong Profits Tax had been determined based on such tax relief.

 

The Group has ceased operating under the BFDC Agreement in April 2015. According to DIPN 21, the apportionment of profits on a 50:50 basis is no longer applicable during the year ended March 31, 2016 and 2017.

 

  F - 17  

 

 

HIGHWAY HOLDINGS LIMITED

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS – continued

(In thousands of U.S. dollars, except for shares and per share data)

 

3. INCOME TAXES – continued

 

The components of income before income taxes are as follows:

 

    Year ended March 31,  
    2015     2016     2017  
    $     $     $  
                   
Hong Kong     1,104       1,361       513  
China     173       146       248  
      1,277       1,507       761  

 

The provision for income taxes consists of the following:

 

    Year ended March 31,  
    2015     2016     2017  
    $     $     $  
                   
Hong Kong                        
Current tax     78       143       103  
Deferred tax     (12 )            
      66       143       103  
China                        
Current tax     68       100       133  
      134       243       236  

 

A reconciliation between the provision for income taxes computed by applying the Hong Kong profits tax rate to profit before income taxes, the actual provision for income taxes is as follows:

 

    Year ended March 31,  
    2015     2016     2017  
    %     %     %  
                   
Profits tax rate in Hong Kong     16.5       16.5       16.5  
Non-deductible items/non-taxable income (Note)     1.5       9.7       15.2  
Changes in valuation allowances     (1.6 )     (6.8 )     (5.9 )
Overprovision of profits tax in prior year     (3.8 )     (0.2 )     (0.5 )
Effect of different tax rate of subsidiaries operating in other jurisdictions     (2.8 )     0.8       2.8  
Others     0.6       (4.0 )     2.9  
Effective tax rate     10.4       16.0       31.0  

 

Note: Amount primarily represents non-deductible social costs and administrative expenses incurred by Nissin Metal and Plastic (Shenzhen) Company Limited and Highway Holdings.

 

  F - 18  

 

 

HIGHWAY HOLDINGS LIMITED

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS – continued

(In thousands of U.S. dollars, except for shares and per share data)

  

3. INCOME TAXES – continued

 

Deferred income tax (assets) liabilities are as follows:

 

    As of March 31,  
    2016     2017  
    $     $  
Deferred tax liability:                
Property, plant and equipment     34       33  
                 
Deferred tax asset:                
Tax loss carryforwards     (614 )     (568 )
Valuation allowance     612       567  
                 
Total net deferred tax asset     (2 )     (1 )
                 
Net deferred tax liability     32       32  

 

Movement of valuation allowances are as follows:

 

    Year ended March 31,  
    2015     2016     2017  
    $     $     $  
                   
At the beginning of the year     803       722       612  
Changes in prior year tax losses carry forward     (60 )     (8 )     -  
Current year reduction     (21 )     (102 )     (45 )
                         
At the end of the year     722       612       567  

 

A valuation allowance has been provided on the deferred tax asset because the Group believes that it is not more likely than not that the asset will be realized. As of March 31, 2016 and 2017, a valuation allowance was provided for the deferred tax asset relating to the future benefit of net operating loss carryforward as the management determined that the utilization of those net operating loss carryforward is not more likely than not. If events occur in the future that allow the Group to realize more of its deferred tax assets than the presently recorded amount, an adjustment to the valuation allowance will be made when those events occur.

 

As of March 31, 2016 and 2017, tax losses amounting to approximately $3,720 and $3,444, respectively may be carried forward indefinitely.

 

As of March 31, 2016 and 2017, the Group's China subsidiary had no tax loss that would expire five years from respective financial years incurring the losses.

 

  F - 19  

 

 

HIGHWAY HOLDINGS LIMITED

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS – continued

(In thousands of U.S. dollars, except for shares and per share data)

 

3. INCOME TAXES – continued

 

Uncertainties exist with respect to how China's current income tax law applies to the Group's overall operations, and more specifically, with regard to tax residency status. China's Enterprise Income Tax (“EIT”) Law includes a provision specifying that legal entities organized outside of the China will be considered residents for China income tax purposes if their place of effective management or control is within China. The Implementation Rules to the EIT Law provides that non-resident legal entities will be considered China residents if substantial and overall management and control over the manufacturing and business operations, personnel, accounting, properties, etc. occurs within China. The Company does not believe that its legal entities organized outside of China should be treated as residents for the EIT Law's purposes. Because substantially all of the Company's revenues on a consolidated basis are generated in China, and the Company's legal entities organized outside of China does not generate any taxable income on a standalone basis, even if one or more of the Company's legal entities organized outside of China were characterized as China tax residents, the Company does not expect any significant adverse impact on the Company's consolidated results of operations.

 

The Group has made its assessment of the level of tax authority for each tax position (including the potential application of interest and penalties) based on the technical merits, and has measured the unrecognized tax benefits associated with the tax positions. Based on the evaluation by the Group, it was concluded that there are no significant uncertain tax positions requiring recognition in the consolidated financial statements.

 

The Group classifies interest and/or penalties related to unrecognized tax benefits as a component of income tax provisions; however, as of March 31, 2016 and 2017, there is no interest and penalties related to uncertain tax positions, and the Group has no material unrecognized tax benefit which would favorably affect the effective income tax rate in future periods. The Group does not anticipate any significant increases or decreases to its liability for unrecognized tax benefit within the next twelve months. The fiscal years 2008 to 2017 remain subject to examination by the Hong Kong tax authority.

 

  F - 20  

 

 

HIGHWAY HOLDINGS LIMITED

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS – continued

(In thousands of U.S. dollars, except for shares and per share data)

 

4. INVENTORIES

 

Inventories consisted of the following:

 

    As of March 31,  
    2016     2017  
    $     $  
             
Raw materials     774       1,914  
Work in progress     29       71  
Finished goods     622       280  
                 
      1,425       2,265  

 

Slow moving inventories amounting to $80, $25 and $41 were written off during the years ended March 31, 2015, 2016 and 2017, respectively.

 

5. PROPERTY, PLANT AND EQUIPMENT, NET

 

Property, plant and equipment, net consist of the following:

 

    As of March 31,  
    2016     2017  
    $     $  
             
At cost:                
Machinery and equipment     12,205       12,386  
Furniture and fixtures     441       442  
Leasehold improvements     493       506  
Motor vehicles     153       153  
                 
Total     13,292       13,487  
Less: Accumulated depreciation and impairment     (12,171 )     (12,533 )
                 
Property, plant and equipment, net     1,121       954  

 

Depreciation expense incurred for the years ended March 31, 2015, 2016 and 2017 were $393, $317 and $266, respectively.

 

Write off of property, plant and equipment amounting to $nil, $117 and $nil during the years ended March 31, 2015, 2016 and 2017, respectively.

 

  F - 21  

 

 

HIGHWAY HOLDINGS LIMITED

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS – continued

(In thousands of U.S. dollars, except for shares and per share data)

 

6. INVESTMENTS IN EQUITY METHOD INVESTEES

 

The following table provides a reconciliation of the investments in equity method investees in the Group's consolidated balance sheet as of March 31, 2016 and 2017 and the amount of underlying equity in net assets of the equity investees:

 

    As of March 31,  
    2016     2017  
    $     $  
             
The Group's proportionate share of equity in the net assets of equity investees     5       5  
Less: Accumulated impairment losses recognized     (5 )     (5 )
Investments in equity investees reported in the consolidated balance sheet            

 

On August 5, 2003, the Group acquired a 50% equity interest in Kayser Technik (Overseas) Inc. (K.T.I.) (“Kayser Technik (Overseas)”) (formerly known as Kayser Photo (Overseas) Corp. (K.P.C.)), a company incorporated in the Republic of Panama, for cash consideration of $5. Kayser Technik (Overseas) was engaged in the trading of camera batteries, films and disposable cameras and became inactive. Such investment was fully impaired as of March 31, 2016 and 2017.

 

7. Accrued expenses and other current liabilities

 

Accrued expenses and other current liabilities consisted of the following:

 

    As of March 31,  
    2016     2017  
    $     $  
             
Accrued payroll and employee benefits     2,185       2,260  
Deposits received from customers     26       20  
Accrued audit fee     252       251  
Others     326       522  
                 
      2,789       3,053  

 

  F - 22  

 

 

HIGHWAY HOLDINGS LIMITED

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS – continued

(In thousands of U.S. dollars, except for shares and per share data)

 

8. COMMITMENTS AND CONTINGENCIES

 

(a) The Group leases premises under various operating leases which do not contain any renewal or escalation clauses. Rental expense under operating leases was $1,133, $1,111 and $1,145 for the years ended March 31, 2015, 2016 and 2017, respectively.

 

As of March 31, 2017, the Group is committed under operating leases requiring minimum lease payments as follows:

 

    $  
Year ending March 31,        
2017     1,138  
2018     1,158  
2019     1,115  
         
      3,411  

 

(b) As of March 31, 2016 and 2017, the Group had commitments for capital expenditure contracted for but not provided in the consolidated financial statements in respect of acquisition of property, plant and equipment of $20 and $nil, respectively.

 

9. TREASURY STOCK

 

a s of March 31, 2016 and 2017, 5,049 shares were held in treasury and are not eligible to vote.

 

10. CONCENTRATIONS OF CREDIT RISK AND MAJOR CUSTOMERS

 

The Group's financial instruments that are exposed to concentrations of credit risk consist primarily of its cash and cash equivalents and trade receivables.

 

The Group's cash and cash equivalents are high-quality deposits placed with banking institutions with high credit ratings. This investment policy limits the Group's exposure to concentrations of credit risk.

 

The trade receivable balances largely represent amounts due from the Group's principal customers who are generally international organizations with high credit ratings. Letters of credit are the principal security obtained to support lines of credit or negotiated contracts from a customer. As a consequence, related credit risk are limited.

 

  F - 23  

 

 

HIGHWAY HOLDINGS LIMITED

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS – continued

(In thousands of U.S. dollars, except for shares and per share data)

 

10. CONCENTRATIONS OF CREDIT RISK AND MAJOR CUSTOMERS – continued

 

Accounts receivable from the three customers with the largest receivable balances as of March 31, 2016 and 2017 are as follows:

 

    Percentage of
accounts receivable
 
    2016     2017  
    %     %  
             
Customer A     45.3       47.9  
Customer B     12.9       13.0  
Customer C     11.0       12.0  
                 
Three largest receivable balances     69.2       72.9  

 

Details of the movements of the allowances for doubtful account are as follows:

 

    Year ended March 31,  
    2015     2016     2017  
    $     $     $  
                   
At beginning of year     6       6       6  
Allowance for the year     -       -       60  
                         
At end of year     6       6       66  

 

A substantial percentage of the Group's sales are made to four customers and are typically on an open account basis. Customers accounting for 10% or more of total net sales in any of the years ended March 31, 2015, 2016 and 2017 are as follows:

 

    Year ended March 31,  
    2015     2016     2017  
    %     %     %  
                   
Customer A (note a)     38.3       44.1       46.0  
Customer B (note b)     13.1       12.2       11.6  
Customer C (note b)     N/A       14.0       11.0  
Customer D (note a)     N/A       N/A       10.7  

 

  F - 24  

 

 

HIGHWAY HOLDINGS LIMITED

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS – continued

(In thousands of U.S. dollars, except for shares and per share data)

 

10. CONCENTRATIONS OF CREDIT RISK AND MAJOR CUSTOMERS – continued

 

Notes:

 

(a) Sales to this customer were reported in both of the Metal Stamping and Mechanical OEM and Electric OEM operating segments.
(b) Sales to this customer were reported in the Electric OEM operating segment.

 

11. NET INCOME PER SHARE

 

The following table sets forth the computation of basic and diluted net income per share for years indicated:

 

    Year ended March 31,  
    2015     2016     2017  
    $     $     $  
Net income attributable to Highway Holdings  Limited's shareholders, basic and diluted     1,150       1,251       527  
                         
Shares:                        
Weighted average common shares used in computing basic net income per share     3,786,542       3,801,874       3,801,874  
                         
Effect of dilutive securities:                        
Weighted average shares from assumed exercise of stock options and issuance of common shares     8,259       -       -  
                         
Weighted average common shares used in computing diluted net income per share     3,794,801       3,801,874       3,801,874  
                         
Net income per share, basic     0.30       0.33       0.14  
                         
Net income per share, diluted     0.30       0.33       0.14  

 

No option to purchase common shares was excluded in the computation of 2015 diluted net income per share as the effect was dilutive. All share options were exercised or lapsed before the year ended March 31, 2015. No share option is outstanding for the year ended March 31, 2016 and 2017.

 

  F - 25  

 

 

HIGHWAY HOLDINGS LIMITED

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS – continued

(In thousands of U.S. dollars, except for shares and per share data)

 

12. STAFF RETIREMENT PLANS

 

The Group operates a Mandatory Provident Fund (“MPF”) scheme for all qualifying employees in Hong Kong. The MPF is a defined contribution scheme and the assets of the scheme are managed by a trustee independent of the Group.

 

The MPF are available to all employees aged 18 to 64 with at least 60 days of service under the employment of the Group in Hong Kong. Contributions are made by the Group to the MPF at a rate of 5% based on the staff's relevant income.

 

12. STAFF RETIREMENT PLANS – continued

 

The Group's full time employees in China participate in a government-mandated multiemployer defined contribution plan pursuant to which certain medical care unemployment insurance, employee housing fund and other welfare benefits are provided to employees. The China labor regulations require the Group to accrue for these benefits based on certain percentages of the employees' salaries. No forfeited contributions may be used by the employer to reduce the existing level of contributions.

 

The cost of the Group's contribution to the staff retirement plans in Hong Kong and China amounted to $193, $212 and $227 for the years ended March 31, 2015, 2016 and 2017, respectively.

 

13. STOCK OPTIONS

 

The Group has adopted the 1996 Stock Option Plan (the “Option Plan”). The Option Plan provides for the grant of options to purchase common shares to employees, officers, directors and consultants of the Group. The Option Plan is administered by the Compensation Committee appointed by the Board of Directors, which determines the terms of the options granted, including the exercise price (provided, however, that the option price shall not be less than fair market value or less than the par value per share on the date the options granted), the number of common shares subject to the option and the option's exercisability. The maximum exercisable period of options granted under the Option Plan is five years.

 

  F - 26  

 

 

HIGHWAY HOLDINGS LIMITED

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS – continued

(In thousands of U.S. dollars, except for shares and per share data)

 

13. STOCK OPTIONS – continued

 

Since the Company had granted options for the purchase of all authorized shares under the 1996 Option Plan, on June 26, 2010, the Company adopted the “2010 Stock Option And Restricted Stock Plan” (the “2010 Option Plan”). The 2010 Option Plan replaced the 1996 Option Plan. Under the new option plan, the Company is authorized to grant options, and to issue restricted shares, for a total of 600,000 shares. The options vest in accordance with the terms of the agreements entered into by the Group and the grantee of the options. To date, no options and restricted shares have been granted under the 2010 Option Plan.

 

No options were granted by the Company for the years ended March 31, 2015, 2016 and 2017.

 

As of March 31, 2015, 2016 and 2017, there were no unrecognized compensation cost related to non-vested stock options granted under the Option Plan, nor any non-vested stock options. All share options were exercised or lapsed at March 31, 2015. No share option is outstanding during the years ended March 31, 2015, 2016 and 2017.

 

14. SEGMENT INFORMATION

 

The Group's chief operating decision maker evaluates segment performance and allocates resources based on several factors, of which the primary financial measure is operating income.

 

The Group operates in two segments, Metal stamping and mechanical OEM segment and Electric OEM segment. The Metal stamping and mechanical OEM segment focuses on manufacturing and sale of metal parts and components. The Electric OEM segment focuses on manufacturing and sale of plastic and electronic parts and components.

 

Intersegment sales arise from transfer of goods between segments. These sales are generally at price consistent with what the Group would charge third parties for similar goods. A summary of the net sales, profitability information and asset information by segment and geographical areas is shown below:

 

  F - 27  

 

 

HIGHWAY HOLDINGS LIMITED

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS – continued

(In thousands of U.S. dollars, except for shares and per share data)

 

14. SEGMENT INFORMATION – continued

 

    Year ended March 31,  
    2015     2016     2017  
    $     $     $  
Net sales:                        
Metal stamping and Mechanical OEM     12,520       10,268       8,323  
Electric OEM     9,853       12,667       11,280  
                         
Total net sales     22,373       22,935       19,603  
                         
Operating income:                        
Metal stamping and Mechanical OEM     745       738       267  
Electric OEM     605       916       646  
Corporate     (79 )     (138 )     (152 )
                         
Total operating income     1,271       1,516       761  
                         
Interest expense:                        
Metal stamping and Mechanical OEM     -       -       -  
Electric OEM     -       -       -  
                         
Total interest expense     -       -       -  
                         
Depreciation and amortization expense:                        
Metal stamping and Mechanical OEM     226       137       107  
Electric OEM     167       180       159  
                         
Total depreciation and amortization     393       317       266  
                         
Capital expenditure:                        
Metal stamping and Mechanical OEM     71       226       88  
Electric OEM     58       298       109  
                         
Total capital expenditure     129       524       197  

 

  F - 28  

 

 

HIGHWAY HOLDINGS LIMITED

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS – continued

(In thousands of U.S. dollars, except for shares and per share data)

 

14. SEGMENT INFORMATION – continued

 

    As of March 31,  
    2016     2017  
    $     $  
Total assets:                
Metal stamping and Mechanical OEM     7,268       7,374  
Electric OEM     9,638       8,597  
Corporate     133       1,581  
                 
Total assets     17,039       17,552  

 

    As of March 31,  
    2016     2017  
    $     $  
Long-lived assets:                
Metal stamping and Mechanical OEM     518       412  
Electric OEM     603       542  
                 
Total long-lived assets     1,121       954  

 

All of the Group's sales are co-ordinated through its head office in Hong Kong. The Group considers revenues to be generated by geographic area based on the physical location of customers. t he breakdown by geographic area is as follows:

 

    Year ended March 31,  
    2015     2016     2017  
    $     $     $  
Net sales:                        
Hong Kong and China     4,703       5,662       4,700  
Other Asian countries     1,734       134       31  
Europe     15,153       16,342       14,037  
North America     783       797       835  
                         
      22,373       22,935       19,603  

 

All of the Group's long-lived assets are located in Hong Kong and China.

 

  F - 29  

 

 

HIGHWAY HOLDINGS LIMITED

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS – continued

(In thousands of U.S. dollars, except for shares and per share data)

 

15. RELATED PARTY TRANSACTION

 

There is no material related party transaction for the years ended March 31, 2015, 2016 and 2017.

 

16. BUSINESS COMBINATION

 

The Company acquired 25% equity interest in Kayser Myanmar on June 9, 2014 at a consideration of $25 and further acquired 50% equity interest in Kayser Myanmar on March 9, 2015 at a consideration of $50. The provisional assets and liabilities of Kayser Myanmar had been recorded at fair values on the date of acquisition.

 

    $  
Identifiable assets acquired, at fair value:        
Cash and cash equivalents     56  
Accounts receivable     293  
Other assets     76  
Property, plant and equipment     145  
Long term payables     (545 )
Other liabilities     (2 )
         
      23  

 

The non-controlling interest (25%) in Kayser Myanmar recognized at the acquisition date was measured by reference to the proportionate share of recognized amounts of net assets of Kayser Myanmar and amounted to $25.

 

  F - 30  

 

 

HIGHWAY HOLDINGS LIMITED

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS – continued

(In thousands of U.S. dollars, except for shares and per share data)

 

16. BUSINESS COMBINATION – continued

 

    $  
Goodwill arising on acquisition:        
Cash consideration paid     50  
Add: Non-controlling interests     25  
Add: Interest in equity investee previously held     25  
Less: Identifiable net assets acquired     (23 )
         
Goodwill arising on acquisition     77  

 

    $  
Net cash outflow arising on acquisition is determined as follows:        
Cash consideration paid     (75 )
Bank balance and cash acquired     56  
         
      (19 )

 

On January 12, 2017, the Company further acquired 9% equity interest of Kayser Myanmar at a consideration of $9 from the non-controlling interest. As at March 31, 2017, the Company held 84% equity interest in Kayser Myanmar.

 

* * * * * *

 

  F - 31  

 

EXHIBIT 4.25

 

Long Cheng Industrial Zone General Estate Rental Agreement

 

Contract No.

Landlord (Party A): Shenzhen Long Cheng Industry & Trade Industrial Ltd.

Tenant (Party B): Nissin Metal and Plastic (Shenzhen) Limited

Place of Signing: Long Cheng Industrial Zone

Time of Singing: 18th Jul 2016

 

According to ‘The Contract Law of the People’s Republic of China’ and related rules, in order to ensuring the rights and responsibilities for both landlord and tenant, this agreement was signed under compromise.

 

Rule #1: Name of rental premises, Area

 

Party A leases building structure with area of 20,776.00 sq meter and dormitory with area of 3,637.80 sq meter to Party B, the total area is 24,413.80 sq. meter.(See Attachment).

 

Rule #2: Monthly rental and other expenses

 

Party B has to pay Party A for the rental and management fee, totaling Renminbi Five Hundred Fifty Two Thousand Four Hundred Eight Four Dollars and Thirty Cents Only (RMB 552,484.30). The rent for each full year of the contract was increased by 4% on the previous year (March 1, 2018 and March 1, 2019, respectively). The rental and management fee are paid once a month, Party B should pay the rental and management fee to Party B either by cash or transferring to Party A’s bank account before 10 th of each month.

 

Rule #3: Deposit

 

Party B should pay 3 months rental and management fee to Party A as deposit, totaling Renminbi One Thousand Six Hundred Fifty Seven Thousand Four Hundred Fifty two Dollars and Ninety Cents Only (RMB 1,657,452.90). Interest free for deposit. The deposit should be refunded to Party B when contract ends, Party A is allowed to deduct any unpaid rental and relocation expenses.

 

Rule #4: Lease terms

 

The rental period lasts for three years, from 1st March 2017 to 29th February 2020. This agreement is effective from 1st March 2017.

 

 

 

  

Rule #5: Repair and maintenance during rental period

 

Party B is responsible for the repair and maintenance that requested by Party B and agreed by Party A. Party B is responsible to maintain the rental premises in good condition. Party A is responsible for the repair and maintenance caused by the rental premises itself.

 

The criteria for the repair and maintenance are as follows.

 

1. The main structure of the building cannot be damaged, the proposal of decoration has to be approved by Party A.
2. The position and function of the building and all supplementary facilities cannot be altered and damaged.
3. Doors and windows cannot be damaged; all kinds of colorized windows are not permitted.
4. Water and electricity system has to be maintained entire. Drains and emergency pathway cannot be blocked

 

Rule 6: Responsibility of Party A and Party B

 

Responsibility of Party A

 

1. Pass the building to Party B on time, and is responsible for water supply, electricity supply and roads of the factory
2. Assist Party B to apply Operation License, Taxation registration, etc. (the fees are paid by Party B)
3. During the contract period, assist Party B to solve the operational difficulties
4. Ensure fire safety, clean and hygienic environment and handle complaint in time.

 

Responsibility of Party B

 

1. Pay monthly rent, utility (water and electricity) expense and management fee on time.
2. Pay utility expense for the building structure and part of public area, also responsible for repair the damage done by human factor.
3. Follow all laws and regulations announced by the government agency and the Party A. No illegal acts should be perform on-site or any activities that harm the public or the Party A’s interest.
4. Prevent sub-leasing and it is not allowed.

 

 

 

  

5. Appoint a person liable for the fire hazard as and set up a team of five to seven as fire hazard prevention committee to maintain the standard of fire department for the rental building structure. Any violation will be prosecuted.
6. Promote proper use of public area during the contract period, use of public area should not affect other tenants and Party B is liable for the damaged done.
7. Not to redecorate the building structure and facility without the permission of Party A. Party B is responsible to payback the cost of the structure/facility dismantled.

 

If Party B violate any of its term #1,3,4,7 under Rule#6 . Party A has authority to terminate the contract and vacant the building structure Party A rental. Deposit paid by Party A can be confiscate and Party A is liable for any consequences.

 

Party B has the right to purse Party A for its responsibility if the term#6 is violated and not handled in time.

 

Rule 7: Breach of Contract

 

Party A is being considered as breach of contract if they are not able to provide:

 

1. The building structure to the Party B according to the period listed in the contract.
2. The related equipment to the Party B according to the contract.

Party B is being considered as breach of contract if they are not able to:

 

1. Repair for the building structure & equipment damaged.
2. Compensate for the damaged made by unauthorized modification of building structure & equipment.
3. Vacant building structure after the contract ends.
- Party B is liable to pay the rent and related expense plus a penalty per day for the first 30days after the contract ends if Party B haven’t return the building structure to Party A. Amount for the penalty per day is counted as: 1/1000* the amount of monthly rent
4. Pay on time and there is late penalty for every late payment day for the monthly rental.

- The amount for late Penalty per day is counted as: Amount for monthly rent and related applicable expense*Day Overdue*0.1%

 

If Party B is breaching the contract, Party A can:

1. Charge Party B two month rent as penalty for breach of contract.
2. Force the Party B to move out and vacant the building structure
3. Sue Party B in China court and take every legal method to collect overdue amount if owning two month’s rent and charge.

 

 

 

  

Rule #8: Disclaimer

 

1. Party B is not liable for the repair for the building structure damaged by the superior force (known as Act of God). However, Party B should report immediately to the Party A and submit the related legal supporting to Party A when requested.

 

2. 4#Simple Building. During the period of the contract, Party B is not allowed to pile up flammable items, if required by the government or urban construction group company for dismantling, Party A shall notify Party B three months in advance, the two parties agreed to terminate the lease contract for Simple Building which do not bear the liability for breach of contract and do not pursue the cause of my loss.

 

Rule #9 : Ways to solve disagreement

 

Disagreement should be solved by negotiation for both Party B and Party A, and then should bring up to third-party arbitration or local court in China if negotiation failed.

 

Rule #10: Others

 

1. Formal paper notification should submit to another party if one wants to terminate the contract before the date listed in the contract three month ahead. The contract can be terminate upon both Party A and Party B agree and party who terminate the contract should pay three month rent to another party as penalty.


2. If Party B decide not to renew the contract, Party B must restore the building structure back to original condition and paid all expense incurred (if applicable) before return to Party A, then Party A will paid deposit back to Party B. If Party B decided to let Party A to do the restoration, all expense incurred will deducted from deposit before paid back to Party B and Party B is responsible to pay any expense excess the deposit.

 

3. Party B must submit paper notification to Party A six month before the contract ends for their contract renewal intention. Party A promise Party B has the priority to renew the contract under the same terms and condition with other potential tenant’s offer. All renewal should be sign under a new contract with both parties signature.

 

4. Terms in the contract can be change when agreed by both Party A and Party B.

 

5. “The Contract Law of the People’s Republic of China” should be the bases for any other unlisted terms in this contract.

 

 

 

  

6. Chinese Version should be the bases to follow when there is any discrepancy in other language version. The contract shall be made in five copies, and Party A shall hold three copies, and Party B shall hold two copies of the contract, which shall be valid equally. The contract shall come into force upon signature and seal by the representatives of both parties.

 

  Landlord Tenant
  Shenzhen Long Cheng Industry & Trade Nissin Metal and Plastic (Shenzhen) Limited
  Industrial Ltd.  

 

Attachment

 

Area and Rent for the Building Structure

 

  Serial   Rental Unit   Area in Sq
Meter
  Unit Price  

Rent

  1   1# Factory   5300        
  2   2# Factory   5300        
  3   First floor of 7# Factory   1060        
  4   4#Simple Building   550        
  5   8# Factory   8566        
  Building Sub Total       20776        
  7   C# Dormitory   3637.80        
  Dormitory Sub Total       3637.80        
  Rental Area in Total       24413.8   22.63    
  Rent in Total               RMB 552484.3/Mth

 

 

 

 

EXHIBIT 4.26

 

AGREEMENT PERMITTED TO USE WITH (2) YEARS PERMISSON ORDER FOR LAND

 

AND BUILDING UNDER CONTRACTUAL LICENSEE PLEDGE

 

On                      2016(C.E), the Land and Building Owner and Contractual Licensee, who receives the Right of Use with Permission Order, under the Pledge made/executed this Agreement permitted to use for (2) years with the Permission Order under the Pledge at Aung Yadanar Phyo Commercial Company Limited of No. 21 (A), Thiri Mon Housing, Bayintnaung Main Road, (15) Ward, Hlaing Township, Yangon Region, as follows;-

 

LAND AND BUILDING : U KHIN HLA
   
OWNER : 12/Pa Za Ta (Naing) 024203
   
(Person, who let to use : No.21(A), Thirimon Housing,
   
With Permission order   Hlaing Township, Yangon Region.
   
Under Pledge)  
   
LAND AND BUILDING : KAYSER MYANMAR MANUFACTURING CO.,LTD.
   
USER   No. 259, Plot No. (25), Mekhayar Min Thar  Gyi Street,
   
(With Permission order   Shwe Lin Ban Industrial Zone,
   
Under Pledge)   Hlaing Thar  Yar Township, Yangon Region.

 

(In saying as the above stated Land and Building Owner (Person, who let to use with Permission Order under Pledge), the Owner of Land/ Building himself and his wife, Sons/Daughters etc., Family Members, etc., Right of Heirs, Persons with Possession Rights in concern with Land must be noted, as included.)

 

(In saying as the Person who using with Permission Order the Land and Building, Managing Director and Directors, Staffs, Authorised Representatives, All Assignees from KAYSER MYANMAR MANUFACTURING CO.,LTD must be noted, as included.)

 

1.             Out of the so called Big Land Plot Land Plot No. 259, Land Measurement Ward. No. 25, Mekhatyar Min Thar Gyi Street, Shwe Lin Ban Industrial Zone, Hlaing Thar Yar Township, Yangon Region, Part of it measuring 20,000 Sq.ft Land Plot and Building on it, is agreed to use with Permission Order under Pledge, by Owner to KAYSER MYANMAR MANUFACTURING CO.,LTD., and this Agreement is executed accomplished.

 

 

 

 

2.             Under the Pledge for this Agreement, List of Materials Heading Permitted to use with Permission Order, it is agreed to for the land Plot and Building on it at the Rate of Ks 8,000,000.00(Kyat Eight Million only)per Month for the period of (2)years(24-months)from 1.1.2017 to 31.12.2018.

 

ANNEXTURE OF

 

AGREEMENT PERMITTED TO USE WITH 2 YEARS PERMISSION ORDER FOR LAND

 

AND BULDING UNDER CONTRACTUAL LICENSEE PLEDGE

 

Therefore for 24 months, from (1.1.2017) to (31.12.2018) used with Permission order under the Pledge, Ks-192,000,000.00(Kyat One Hundred and Ninety Two Million only) as an exchange rate of Ks- 1189 (Kyat One Thousand and One Hundred Eighty Nine only) per 1 USD must be settled to Owner U Khin Hla by the person with Using Right for the land and Building with Permission Order under Pledge, within 15 days From (17.8.2016) to (31.8.2016) Agreement Execution Day.

 

Provisions to be followed / accomplished by the person using with Permission Order the land and Building under Pledge

 

3.             Person using the land and Building with Permission Order and Pledge shall do/ accomplish the Businesses, Legally taken for Permission Order from the Myanmar Investment Commission, according to the Existing Laws in the Land and Building with the Accomplishment Right. In accomplishing the Permitted Businesses, the Laws, By Laws Orders, Directives and Fixed Provisions issued by the Concerning Authorities of the Republic of the Union of Myanmar.

 

4.             During the Period, in which it is permitted with this Agreement, KAYSER MYANMAR MANUFACTURIONS CO., LTD using with the Permission Order must pay / deposit the Due Taxes in relation with the Business completely without leaving Any Debt.

 

5.             Due Monies for Electricity Use must be paid proportionately by the Person using with Permission Order. But the Meter Maintenance Charge must be paid 50% each by the Land and Building Owner and the User with Permission Order.

 

  - 2 -  

 

 

6.             In the Building with Accomplishment Right of Use with Permission Order, the Original Entrances are already in East, West and North. But only the North Entrance and Compound Entrance shall be permitted for Use, when Heavy Machineries to be used enter/leave the Factor.

 

In the Remaining Times, East Gate and North Gates shall absolutely permitted to use. The Gates shall be closed Full Time.

 

7.             Person using with Permission Order under Pledge, shall not Sub Transfer , Sub- lease the personally Using Land and Building under Pledge and Permission Order, including, No Right to plan, transfer.

 

8.             Person using with Permission Order under this Agreement has No Right to accomplish Any Business in the personally using Land and Building that shall cause Impact/ Loss to the Owner. If unwanted Problems occur, Person using with Permission Order shall have to solve/accomplish so that there shall be No Losses to the Owner.

 

9.             Land and Building given Permission for Use with Permission Order under this Agreement are confessed to deliver back by the User with Permission Order on the Fixed Expiry Date(31.12.2018) included in this Agreement (If it fails to deliver back on (31.12.2018) for the Exceeding Used Days, the Person using under Permission Order shall have to compensate the Owner at the rate of Ks-500,000/(Kyat five Lakhs Only) per day.

 

10.           Before Completion of Permitted Period with this Agreement, the Person using under Permission Order leaves on Own Will from the Land and Building using under Permission Order, the Money settled under this Agreement must not claim back the Money paid under this Agreement.

 

11.           If the Person using with Permission Order under the Pledge exactly comply with/ accomplish/use according to the Provisions included in this Agreement and if on Any Matter of the Land and Building Owner, before the Permitted Use Period Expiration for the Land and Building, acknowledges and let them leave in (6)months advance from the Land and Building, the Settled Monies for the Use of Land and Building of the Remaining Period together with (6)months Using Money in addition must be paid as Compensation.

 

  - 3 -  

 

 

12.           Repair, Extension Construction of the Building under Business Need of Land and Building permitted for Use under Pledge according to Fixed Standards must be agreed/permitted.

 

13.           After expiration of Permitted Period in the Agreement used with Permission Order under Pledge, if land and building is wanted to use further on it must be acknowledge/ inform to the Owner at least in (6)months advance and accomplish for Extension Period.

 

In making period Extension, Both Sides shall negotiate/extend/amend/fix the using Right, Periodical Value, according to Present Period Condition.

 

14.           If Land and Building used with Permission Order with Pledge causes Major damage/ Loss because of Natural Disaster,the Using Charges for the Remaining Period, does not need to return by the Land and Building Owner to the User with Permission Order. If there is Minor Loss/damage occurs, the Land and Building Owners must repair back during the agreed/negotiated/fixed period.

 

15.           In executing this Agreement and Extension Agreement, Revenue Stamp Fees, Court Fees, if Registered, Registration Expenses and all the Servicing Expenses must be borne by the Person using with Permission Order.

 

16.           Permission Granted to this Land and Building for the Use with this Agreement, is given only with the Permission Order under the Contractual Licensee Pledge and it is agreed to note, it is not leased by the Owner to KAYSER MYANMAR MANUFACTURING CO., LTD.

 

17.           If user want yearly Renovation of Building regularly, must be paid by the user, by bearing the Expenses.

 

Damage because of Accomplishment of User with Permission Order under Pledge, must be amended made with own Money of the User with Permission Order under Pledge, by bearing the Expenses.

 

18.            List of material permitted for use with Permission Order under Pledge

 

(a)           Part of the land, measuring (20,000)Sq.ft out of the so-called bid land plot at No.(259), Land Measurement ward (25). Mekhayar Min Thar Gyi Street, Shwe Lin Pan Industrial Zone, Hlaing Thar Yar Township, Yangon Region and the Building on the Land Plot, according to the Attached Map.

 

  - 4 -  

 

 

(b)           Uses of Water Electric, within Building .

 

Out of the Expressions included in this Agreement, the Meanings (Owner) User with Permission Order under Pledge and Witnesses are personally read, known understood and can be accomplished, complied with, without Anyone’s Urge, Persuasion, Unlawful Use of Power, Cheating, Wornly Talking, T hreat, it is signed/ sealed in the Presence of the following Witnesses on Own Free, Independent Wills.

 

PERMISSON GIVER ON PERMISSION USER WITH PERMISSION ORDER
   
ORDER UNDER PLEDGE WITH PLEDGE
   
/S/U San Yu Aung /S/ Daw Cho Mar
   
U KHIN HLA KAYSER MYANMAR MANUFACTURING CO.,LTD.
   
(LAND AND BUILDING OWNER)  
   
17 Aug 2016 17 Aug 2016

 

WITNESSES

 

Name U San Yu Aung   Name Daw Cho Mar
         
Father Name U Khin Hla   Father Name U Kyaw Tin
         
Registration No 12/Pa Za Ta(N)001562   Registration No 5/Ka La Na(N)033544
         
Occupation   Managing Director   Occupation Accountant
         
Aung Yadanar Phyo Commercial Company Limited   KAYSER MYANMAR MANUFACTURING CO., LTD

 

  - 5 -  

 

 

As the Expressions included in this Agreement are read/known/understood, the Agreement is executed. Land and Building Owner and User with Permission Order under Pledge, approved/sign in the Presence of the following Witnesses and User with Permission Order under Pledge sealed the Left Thumb Seal.

 

DANUBYU U THAN SWE

LL.B,LL.M (Q), H.G.P, Advocate

Company Advisor, Bank Advocate & Advocate (Serial No.2868/84)

(Thesis of Laws)

Office/Bldg.-9, Room 103(E), First Floor, 36 th Short Street, Kyauktada Township,

Residence-No.165 (5-A), Nutmauk Street, Kantawgyi Pat Street, Tamwe Township,

Yangon.

PH-09 425277524, 09 799700199, 098534536

 

 

 

 

Exhibit 4.27

 

 

Our Ref:      LN/170102 

Company Licence No. : C-005253

In reply C      Please quote our reference number on the letter and envelope.

 

17 January 2017 DIRECT FAX : 2827 0821
   
Kayser Limited, SUBJECT TO SIGNING OF THE
Units 1823-1823A, Level 18, DOCUMENT(S) OF LETTING(S)
Landmark North, REFERRED TO HEREIN BUT
39 Lung Sum Avenue, WITHOUT PREJUDICE TO (IF
Sheung Shui, New Territories. ANY) THE PRECEDING
  CONFIRMATION(S)
  OF TENANCY OR
Attn: Ms. Vivian Cheung PRELIMINARY
  AGREEMENT(S) FOR LETTING

 

Dear Sirs,

 

Re : Tenancy Renewal of Units 1823-1823A, Level 18, Landmark North

 

As relating and incidental to the captioned matter, we send you herewith (in duplicate) the draft for the Tenancy Agreement for the captioned premises (“the Tenancy Agreement”) for your early perusal. Please however note that the enclosed draft was prepared based on our standardised letting agreement and we, for the sake of administrative unity, are not prepared to consider and accept any substantial amendment(s) proposed thereto.

 

The enclosed draft is in English. You have right to make your own arrangement to have it translated or interpreted to enable you to thoroughly understand the content and to take legal advice from your lawyer(s) on the matter. If you accept the content of the enclosed draft, please take them as engrossments for signing purpose.

 

Please bear in mind that the Tenancy Agreement must be signed by you on or before 23 February 2017 (“the Signing Date”). We like to give you early notice that the stamping and, if applicable, registration of the Tenancy Agreement duly signed or executed by the parties thereto will be attended to by us. You are therefore required to, on or before the Signing Date, return and send to us the following :-

 

1. The Tenancy Agreement (in duplicate) duly signed or executed by you and as witnessed;

 

2. Copy of your Memorandum and Articles of Association and a certified true copy (by your director or a solicitor) of the Minutes of your Board Meeting sanctioning and approving your entering into with us and signing of the Tenancy Agreement and of your latest Annual Return;

 

.../2

 

 

 

 

 

 

Page 2

 

Kayser Limited

Attn: Ms. Vivian Cheung

 

3. Your share of costs and disbursements as follows : -

 

  3.1 Disbursement HK$800.00 (Cheque to be made payable to Sun Hung Kai Real Estate Agency Ltd)
         
  3.2 ½ share of the stamp duty HK$1,300.50 (Cheque to be made payable to The Government of The HKSAR)
         
  3.3 ½ share of the registration fee HK$105.00 (Separate cheque to be made payable to The Government of The HKSAR)

 

Should you have any query, you may seek independent legal advice or contact us.

 

We like to take this early opportunity to advise that we shall not accept imposition on us by you or your solicitors undertaking to return to you or to your solicitors your part of the Tenancy Agreement signed or executed and stamped (and, if applicable, registered) within a stipulated period of time. Any such undertaking, even if imposed, shall be ignored and have no effect whatsoever.

 

Yours faithfully
For and on behalf of
SUN HUNG KAI REAL ESTATE AGENCY LTD

 

/s/ Janet Ho  
JANET HO
Assistant General Manager - Leasing
Office Leasing Department

 

JH/KT/Cw/bc

 

Encl

 

 

 

 

 

 

Our Ref:     OL-MB 

Company Licence No: C-005253

In reply C       Please quote our reference number on the letter and envelope. Direct Fax: 2827 0821

17 January 2017

 

Kayser Limited,

Units 1823-1823A, Level 18,

Landmark North,

39 Lung Sum Avenue,

Sheung Shui, New Territories.

 

Attn: Ms. Vivian Cheung

 

Dear Sirs,

 

Re: Tenancy Renewal
Units 1823-1823A, Level 18, Landmark North (“the said building”) (“the said premises”)

 

We refer to the renewal of the tenancy in respect of the said premises and we would like to confirm the Landlord’s offer to renew the said tenancy on the broad terms and conditions as follows:-

 

Landlord : SHK SHEUNG SHUI LANDMARK INVESTMENT LIMITED
     
Landlord’s Agent : Sun Hung Kai Real Estate Agency Ltd,
    Room 408, 4/F, Sun Hung Kai Centre,
    30 Harbour Road, Hong Kong.
     
Tenant : Kayser Limited,
    Unit 1803A, 18 th Floor,
    Landmark North,
    39 Lung Sum Avenue,
    Sheung Shui, New Territories.
     
Premises : Units 1823-1823A, Level 18,
    Landmark North,
    39 Lung Sum Avenue,
    Sheung Shui, New Territories.
     
Gross Area : Approx 2,080 sf(G).

 

.../2

 

 

 

 

 

 

Page 2

 

Kayser Limited

Attn: Ms. Vivian Cheung

 

Term : THREE (3) YEARS commencing on 21 March 2017 and expiring on 20 March 2020 (both days inclusive).
     
Rent : Year 1, HK$41,600.00 [i.e. approx @HK$20.00 psf (G)] per month.
     
    Year 2, HK$42,848.00 [i.e. approx @HK$20.60 psf (G)] per month.
     
    Year 3, HK$45,344.00 [i.e. approx @HK$21.80 psf (G)] per month.
     
    Payable monthly in advance, exclusive of air-conditioning and management charges, rates and other outgoings, which are payable by the Tenant.
     
Air-conditioning and Management Charges : Currently at HK$10,088.00 per month (inclusive of provision of management service and standard hours air-conditioning supply), payable monthly in advance and subject to revision prior to the commencement of and during the said term.
     
    The Landlord’s standard hours of air-conditioning supply will be from 0800 hours to 1900 hours daily from Mondays to Fridays and from 0800 hours to 1400 hours for Saturdays. No standard hours of air-conditioning supply is provided on Sundays and Public Holidays. The Tenant’s demand for extra air-conditioning outside the abovesaid hours shall be subject to the Landlord’s approval and surcharge therefor imposed by the Landlord or the manager.
     
Deposit : Three months’ rent and air-conditioning and management charges  at  HK$166,296.00.     The  existing  deposit  of HK$151,008.00 shall be transferred and be applied to pay the deposit payable hereunder and the short-fall of deposit of HK$15,288.00 shall be paid by the Tenant upon signing of this offer letter (“the initial deposit”). No interest is payable on the initial deposit.

 

.../3

 

 

 

 

 

 

Page 3

 

Kayser Limited

Attn: Ms. Vivian Cheung

 

Tenancy Agreement : It is a condition of the agreement constituted by your acceptance of the offer made herein that the new Tenancy Agreement shall be signed by you on or before 23 February 2017. If the new Agreement is not signed by you and returned to us on or before the said date and/or if you have breached any term or condition hereof, the agreement constituted as aforesaid shall be considered to have been breached by you and the Landlord shall be entitled to cancel and terminate the proposed renewal of letting and the said agreement with immediate effect by notice to you in writing and (if any) the initial deposit paid will be forfeited as liquidated damage, but not penalty, to compensate the loss sustained by the Landlord in keeping the said premises available to you, but without prejudice to the Landlord’s right to make claim against you for damages not being set off or covered by (if any) any deposit forfeited or to, as the Landlord will deem fit so to do as an alternative remedy,  enforce performance  of the  said agreement by you.
     
Legal Cost, Stamp Duty & Disbursement : Each party shall pay its own legal costs but stamp duty shall be shared equally between the parties. The Tenant shall also pay to the Landlord a sum of HK$800.00 as contribution towards the disbursement incurred from this letting.
     
User : For Office use only.
     
Rent-free Period : There will be no rent-free period during the term of the tenancy.
     
Handover Condition : The Tenant shall take the said premises in its “as-is” state and condition, and shall at its own costs reinstate the said premises in a “bare shell” state and condition upon expiry or earlier termination of this Tenancy.

 

.../4

 

 

 

 

 

 

Page 4

 

Kayser Limited

Attn: Ms. Vivian Cheung

 

Rights of Third Party : (a) Save as provided in sub-clause (b) below, the Landlord and the Tenant do not intend any term of this Agreement to be enforceable pursuant to the Contracts (Rights of Third Parties) Ordinance (Cap.623) (the “Rights of Third Parties Ordinance”).
       
    (b) Subject to the provisions contained in this Clause, each of the following third parties (each being a “Designated Third Party”) shall have the benefit of and may enforce this Agreement pursuant to the Rights  of Third Parties Ordinance:-
       
      (i) the manager of the said building; and
       
      (ii) the Landlord’s successor(s) in title and assign(s).
       
    (c) This Agreement may be varied from time to time or (where such right of rescission exists) rescinded without the consent of any Designated Third Party or any other person who is not a party to this Agreement and section 6(1) of the Rights of Third Parties  Ordinance shall not apply to this Agreement.

 

.../5

 

 

 

 

 

 

Page 5

 

Kayser Limited

Attn: Ms. Vivian Cheung

 

Trusting the above terms and conditions are acceptable to you, we shall be glad if you could confirm your acceptance of the said terms and conditions by signing and returning the duplicate of this letter to us together with your cheque payable to “Sun Hung Kai Real Estate Agency Ltd” for the initial deposit (i.e. HK$15,288.00) on or before 23 February 2017, failing which this offer will lapse automatically. We stress that time shall be of the essence hereof. Your acceptance hereof in the said manner shall constitute valid and binding agreement between you and the Landlord for the renewal of letting of the said premises on the broad terms and conditions contained herein.

 

Yours faithfully
For and on behalf of
SUN HUNG KAI REAL ESTATE AGENCY LTD

 

/s/ Janet Ho   We confirm our acceptance to the
JANET HO above terms and conditions
Assistant General Manager - Leasing  
Office Leasing Department  
   
JH/KT/CW/bc (Signed with Co. Chop)
   
  Date:

 

 

 

 

Exhibit 4.28

 

 

 

Our Ref:        LN/170101

Company Licence No. :  C-005253

In reply C Please quote our reference number on the letter and envelope.

 

17 January 2017 DIRECT FAX : 2827 0821

 

Nissin Precision Metal Manufacturing Limited, SUBJECT TO SIGNING OF THE
Unit 1801, Level 18, DOCUMENTS OF LETTING(S)
Landmark North, REFERRED TO HEREIN BUT
39 Lung Sum Avenue, WITHOUT PREJUDICE TO (IF
Sheung Shui, New Territories. ANY) THE PRECEDING
  CONFIRMATION(S)
  OF TENANCY OR
Attn: Ms. Vivian Cheung PRELIMINARY
  AGREEMENT(S) FOR LETTING

 

Dear Sirs,

 

Re : Tenancy Renewal of Unit 1801, Level 18, Landmark North

 

As relating and incidental to the captioned matter, we send you herewith (in duplicate) the draft for the Tenancy Agreement for the captioned premises (“the Tenancy Agreement”) for your early perusal. Please however note that the enclosed draft was prepared based on our standardised letting agreement and we, for the sake of administrative unity, are not prepared to consider and accept any substantial amendment(s) proposed thereto.

 

The enclosed draft is in English. You have right to make your own arrangement to have it translated or interpreted to enable you to thoroughly understand the content and to take legal advice from your lawyer(s) on the matter. If you accept the content of the enclosed draft, please take them as engrossments for signing purpose.

 

Please bear in mind that the Tenancy Agreement must be signed by you on or before 23 February 2017 (“the Signing Date”). We like to give you early notice that the stamping and, if applicable, registration of the Tenancy Agreement duly signed or executed by the parties thereto will be attended to by us. You are therefore required to, on or before the Signing Date, return and send to us the following :-

 

1. The Tenancy Agreement (in duplicate) duly signed or executed by you and as witnessed;

 

2. Copy of your Memorandum and Articles of Association and a certified true copy (by your director or a solicitor) of the Minutes of your Board Meeting sanctioning and approving your entering into with us and signing of the Tenancy Agreement and of your latest Annual Return;

 

…/2

 

 

 

 

 

 

 

 

Page 2

 

Nissin Precision Metal Manufacturing Limited

Attn: Ms. Vivian Cheung

 

3. Your share of costs and disbursements as follows : -

 

  3.1 Disbursement HK$800.00

(Cheque to be made payable to

Sun Hung Kai Real Estate Agency Ltd)

         
  3.2 ½ share of the stamp duty HK$1,196.00

(Cheque to be made payable to

The Government of The HKSAR)

         
  3.3 ½ share of the registration fee HK$105.00

(Separate cheque to be made payable to

The Government of The HKSAR)

 

Should you have any query, you may seek independent legal advice or contact us.

 

We like to take this early opportunity to advise that we shall not accept imposition on us by you or your solicitors undertaking to return to you or to your solicitors your part of the Tenancy Agreement signed or executed and stamped (and, if applicable, registered) within a stipulated period of time. Any such undertaking, even if imposed, shall be ignored and have no effect whatsoever.

 

Yours faithfully  
For and on behalf of  
SUN HUNG KAI REAL ESTATE AGENCY LTD
   
/s/ Janet Ho  
JANET HO  
Assistant General Manager - Leasing  
Office Leasing Department  
   
JH/KT/CW/bc  
   
Encl  

 

 

 

 

 

 

 

 

Our Ref:         OL-MB

Company Licence No:  C-005253

In reply C Please quote our reference number on the letter and envelope. Direct Fax: 2827 0821

17 January 2017

 

Nissin Precision Metal Manufacturing Limited,

Unit 1801, Level 18,

Landmark North,

39 Lung Sum Avenue,

Sheung Shui, New Territories.

 

Attn: Ms. Vivian Cheung

 

Dear Sirs,

 

Re: Tenancy Renewal

Unit 1801, Level 18, Landmark North (“the said building”) (“the said premises”)

 

We refer to the renewal of the tenancy in respect of the said premises and we would like to confirm the Landlord’s offer to renew the said tenancy on the broad terms and conditions as follows:-

 

Landlord : SHK SHEUNG SHUI LANDMARK INVESTMENT LIMITED
     
Landlord’s Agent : Sun Hung Kai Real Estate Agency Ltd,
    Room 408, 4/F, Sun Hung Kai Centre,
    30 Harbour Road, Hong Kong.
     
Tenant : Nissin Precision Metal Manufacturing Limited,
    Unit 1803A, 18 th Floor,
    Landmark North,
    39 Lung Sum Avenue,
    Sheung Shui, New Territories.
     
Premises : Unit 1801, Level 18,
    Landmark North,
    39 Lung Sum Avenue,
    Sheung Shui, New Territories.
     
Gross Area : Approx 1,912 sf(G).
     
Term : THREE (3) YEARS commencing on 21 March 2017 and expiring on 20 March 2020 (both days inclusive).

 

…/2

 

 

 

 

 

  

 

 

Page 2

 

Nissin Precision Metal Manufacturing Limited

Attn: Ms. Vivian Cheung

 

Rent : Year 1, HK$38,240.00 [i.e. approx @HK$20.00 psf (G)] per month.
     
    Year 2, HK$39,387.20 [i.e. approx @HK$20.60 psf (G)] per month.
     
    Year 3, HK$41,681.60 [i.e. approx @HK$21.80 psf (G)] per month.
     
    Payable monthly in advance, exclusive of air-conditioning and management charges, rates and other outgoings, which are payable by the Tenant.
     
Air-conditioning and Management Charges :

Currently at HK$9,273.20 per month (inclusive of provision of management service and standard hours air-conditioning supply), payable monthly in advance and subject to revision prior to the commencement of and during the said term.

     
    The Landlord’s standard hours of air-conditioning supply will be from 0800 hours to 1900 hours daily from Mondays to Fridays and from 0800 hours to 1400 hours for Saturdays. No standard hours of air-conditioning supply is provided on Sundays and Public Holidays. The Tenant’s demand for extra air-conditioning outside the abovesaid hours shall be subject to the Landlord’s approval and surcharge therefor imposed by the Landlord or the manager.
     
Deposit : Three months’ rent and air-conditioning and management charges at HK$152,864.40. The existing  eposit of HK$138,811.20 shall be transferred and be applied to pay the deposit payable hereunder and the short-fall of deposit of HK$14,053.20 shall be paid by the Tenant upon signing of this offer letter (“the initial deposit”). No interest is payable on the initial deposit.

 

…/3

 

 

 

 

 

  

 

 

Page 3

 

Nissin Precision Metal Manufacturing Limited

Attn: Ms. Vivian Cheung

 

Tenancy Agreement : It is a condition of the agreement constituted by your acceptance of the offer made herein that the new Tenancy Agreement shall be signed by you on or before 23 February 2017. If the new Agreement is not signed by you and returned to us on or before the said date and/or if you have breached any term or condition hereof, the agreement constituted as aforesaid shall be considered to have been breached by you and the Landlord shall be entitled to cancel and terminate the proposed renewal of letting and the said agreement with immediate effect by notice to you in writing and (if any) the initial deposit paid will be forfeited as liquidated damage, but not penalty, to compensate the loss sustained by the Landlord in keeping the said premises available to you, but without prejudice to the Landlord’s right to make claim against you for damages not being set off or covered by (if any) any deposit forfeited or to, as the Landlord will deem fit so to do as an alternative remedy, enforce performance of the said agreement by you.
     
Legal Cost, Stamp Duty & Disbursement : Each party shall pay its own legal costs but stamp duty shall be shared equally between the parties. The Tenant shall also pay to the Landlord a sum of HK$800.00 as contribution towards the disbursement incurred from this letting.
     
User : For Office use only.
     
Rent-free Period : There will be no rent-free period during the term of the tenancy.
     
Handover Condition : The Tenant shall take the said premises in its “as-is” state and condition, and shall at its own costs reinstate the said premises in a “bare shell” state and condition upon expiry or earlier termination of this Tenancy.

 

…/4

 

 

 

 

 

 

 

 

Page 4

 

Nissin Precision Metal Manufacturing Limited

Attn: Ms. Vivian Cheung

 

Rights of Third Party : (a) Save as provided in sub-clause (b) below, the Landlord and the Tenant do not intend any term of this Agreement to be enforceable pursuant to the Contracts (Rights of Third Parties) Ordinance (Cap.623) (the “Rights of Third Parties Ordinance”).
       
    (b) Subject to the provisions contained in this Clause, each of the following third parties (each being a “Designated Third Party”) shall have the benefit of and may enforce this Agreement pursuant to the Rights  of Third Parties Ordinance:-
       
      (i) the manager of the said building; and
       
      (ii) the Landlord’s successor(s) in title and assign(s).
       
    (c) This Agreement may be varied from time to time or (where such right of rescission exists) rescinded without the consent of any Designated Third Party or any other person who is not a party to this Agreement and section 6(1) of the Rights of Third Parties Ordinance shall not apply to this Agreement.

 

.../5

 

 

 

 

 

 

 

 

Page 5

 

Nissin Precision Metal Manufacturing Limited

Attn: Ms. Vivian Cheung

 

Trusting the above terms and conditions are acceptable to you, we shall be glad if you could confirm your acceptance of the said terms and conditions by signing and reliraing the duplicate of this letter to us together with your cheque payable to “Sun Hung Kai Real Estate Agency Ltd” for the initial deposit (i.e. HK$14,053.20) on or before 23 February 2017, failing which this offer will lapse automatically. We stress that time shall be of the essence hereof. Your acceptance hereof in the said manner shall constitute valid and binding agreement between you and the Landlord for the renewal of letting of the said premises on the broad terms and conditions contained herein.

 

Yours faithfully

For and on behalf of

SUN HUNG KAI REAL ESTATE AGENCY LTD

 

/s/ Janet Ho    
JANET HO   We confirm our acceptance to the
Assistant General Manager - Leasing above terms and conditions
Office Leasing Department  
     
JH/KT/CW/bc

(signed with Co. Chop)  

     
    Date:

 

 

 

 

 

 

EXHIBIT 8.1

 

Name of Entity

 

The following is a list of this Company’s currently operating subsidiaries. As of the June 26, 2017, active subsidiaries that conduct operations: Nissin Precision Metal Manufacturing Limited; Kayser Limited; Golden Bright Plastic Manufacturing Company Limited; Kayser Myanmar Manufacturing Company Ltd.; and Nissin Metal and Plastic (Shenzhen) Company Limited.

 

Antemat Limited

Kayser Limited 

   
Nissin Mechatronic Limited

Golden Bright Plastic Manufacturing Company Limited

   
Cavour Industrial Limited

Nissin Precision Metal

Manufacturing Limited

   
Nissin Metal and Plastic (Shenzhen) Company Limited Saiwan Industries Limited
   
Kayser Myanmar Manufacturing Company Ltd. Advanced Clean Innovations Asia Limited
   
Hi-Lite Camera Company Limited  

 

All of the foregoing entities are wholly-owned by Highway Holdings Limited, except (i) Kayser Myanmar Manufacturing Company Ltd. (the Company owns 84% of this entity), and (ii) Advanced Clean Innovations Asia Limited (the Company owns 51% of of this entity). All subsidiaries, with the exception of Nissin Metal and Plastic (Shenzhen) Company Limited (organized in China) and Kayser Myanmar Manufacturing Company Ltd. (organized in Myanmar) are incorporated in Hong Kong.

 

 

 

 

EXHIBIT 12.1

 

Certification by the Chief Executive Officer Pursuant to Section 302
of the Sarbanes-Oxley Act of 2002

 

I, Roland W. Kohl, certify that:

 

1.            I have reviewed this annual report on Form 20-F of Highway Holdings Limited;

 

2.            Based on my knowledge, this annual report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this annual report;

 

3.            Based on my knowledge, the financial statements, and other financial information included in this annual report, fairly present in all material respects the financial condition, results of operations and cash flows of the company as of, and for, the periods presented in this annual report;

 

4.            The company’s other certifying officer(s) and I are responsible for establishing and maintaining disclosure controls and procedures (as defined in Exchange Act Rules 13a-15(e) and 15d-15(e)) and internal control over financial reporting (as defined in Exchange Act Rules 13a-15(f) and 15d-15(f)) for the company and have:

 

(a)             Designed such disclosure controls and procedures, or caused such disclosure controls and procedures to be designed under our supervision, to ensure that material information relating to the company, including its consolidated subsidiaries, is made known to us by others within those entities, particularly during the period in which this annual report is being prepared;

 

(b)             Designed such internal control over financial reporting, or caused such internal control over financial reporting to be designed under our supervision, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles;

 

(c)             Evaluated the effectiveness of the company’s disclosure controls and procedures and presented in this report our conclusions about the effectiveness of the disclosure controls and procedures as of the end of the period covered by this report based on such evaluation; and

 

(d)             Disclosed in this report any change in the company’s internal control over financial reporting that occurred during the period covered by the annual report that has materially affected, or is reasonably likely to materially affect, the company’s internal control over financial reporting; and

  

5.            The company’s other certifying officer(s) and I have disclosed, based on our most recent evaluation of internal controls over financial reporting, to the company’s auditors and the audit committee of company’s Board of Directors (or persons performing the equivalent function):

 

(a)             All significant deficiencies and material weaknesses in the design or operation of internal controls over financial reporting which are reasonably likely to adversely affect the company’s ability to record, process, summarize and report financial information; and

 

(b)             Any fraud, whether or not material, that involves management or other employees who have a significant role in the company’s internal controls over financial reporting.

 

Dated: June 29, 2017

 

/s/ Roland Kohl  
Roland Kohl  
Chief Executive Officer  

 

 

 

 

EXHIBIT 12.2

 

Certification by the Chief Financial Officer Pursuant to Section 302
of the Sarbanes-Oxley Act of 2002

 

I, Alan Chan, certify that:

 

1.             I have reviewed this annual report on Form 20-F of Highway Holdings Limited;

 

2.             Based on my knowledge, this annual report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this annual report;

 

3.             Based on my knowledge, the financial statements, and other financial information included in this annual report, fairly present in all material respects the financial condition, results of operations and cash flows of the company as of, and for, the periods presented in this annual report;

 

4.             The company’s other certifying officer(s) and I are responsible for establishing and maintaining disclosure controls and procedures (as defined in Exchange Act Rules 13a-15(e) and 15d-15(e)) and internal control over financial reporting (as defined in Exchange Act Rules 13a-15(f) and 15d-15(f)) for the company and have:

 

(a)             Designed such disclosure controls and procedures, or caused such disclosure controls and procedures to be designed under our supervision, to ensure that material information relating to the company, including its consolidated subsidiaries, is made known to us by others within those entities, particularly during the period in which this annual report is being prepared;

 

(b)             Designed such internal control over financial reporting, or caused such internal control over financial reporting to be designed under our supervision, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles;

 

(c)             Evaluated the effectiveness of the company’s disclosure controls and procedures and presented in this report our conclusions about the effectiveness of the disclosure controls and procedures as of the end of the period covered by this report based on such evaluation; and

 

(d)             Disclosed in this report any change in the company’s internal control over financial reporting that occurred during the period covered by the annual report that has materially affected, or is reasonably likely to materially affect, the company’s internal control over financial reporting; and

  

5.             The company’s other certifying officer(s) and I have disclosed, based on our most recent evaluation of internal controls over financial reporting, to the company’s auditors and the audit committee of company’s Board of Directors (or persons performing the equivalent function):

 

(a)             All significant deficiencies and material weaknesses in the design or operation of internal controls over financial reporting which are reasonably likely to adversely affect the company’s ability to record, process, summarize and report financial information; and

 

(b)             Any fraud, whether or not material, that involves management or other employees who have a significant role in the company’s internal controls over financial reporting.

 

Dated: June 29, 2017

 

/s/ Alan Chan  
Alan Chan  
Chief Financial Officer  

 

 

 

 

EXHIBIT 13.1

 

Certification by the Chief Executive Officer
Pursuant to Section 906 of the Sarbanes-Oxley Act of 2002

 

In connection with the Annual Report of Highway Holdings Limited (the “Company”) on Form 20-F for the period ended March 31, 2017 as filed with the Securities and Exchange Commission on the date hereof (the “Report”), I, Roland Kohl, certify, pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002, to the best of my knowledge, that:

 

(1)            The Report fully complies with the requirements of section 13(a) or 15(d) of the Securities Exchange Act of 1934; and

 

(2)            The information contained in the Report fairly presents, in all material respects, the financial condition and results of operations of the Company.

 

Dated: June 29, 2017

 

/s/ Roland W. Kohl  
Roland W. Kohl  
Chief Executive Officer  

 

 

 

 

EXHIBIT 13.2

 

Certification by the Chief Financial Officer
Pursuant to Section 906 of the Sarbanes-Oxley Act of 2002

 

In connection with the Annual Report of Highway Holdings Limited (the “Company”) on Form 20-F for the period ended March 31, 2017 as filed with the Securities and Exchange Commission on the date hereof (the “Report”), I, Alan Chan, certify, pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002, to the best of my knowledge, that:

 

(1)            The Report fully complies with the requirements of section 13(a) or 15(d) of the Securities Exchange Act of 1934; and

 

(2)            The information contained in the Report fairly presents, in all material respects, the financial condition and results of operations of the Company.

 

Dated: June 29, 2017

 

/s/ Alan Chan  
Alan Chan  
Chief Financial Officer