Risk Factors Summary

Our business and an investment in our common stock are subject to numerous risks and uncertainties, including those highlighted in the section titled “Risk Factors” immediately following this prospectus summary. Some of these risks include:

RISK FACTORS

Any investment in our securities involves a high degree of risk. Investors should carefully consider the risks described below and all of the information contained in this Prospectus before deciding whether to purchase our securities. Our business, financial condition and results of operations could be materially adversely affected by these risks if any of them actually occur. This Prospectus also contains forward-looking statements that involve risks and uncertainties. Our actual results could differ materially from those anticipated in these forward-looking statements as a result of certain factors, including the risks we face as described below and elsewhere in this Prospectus.

Risks Related to our Business and Financial Condition

Because Fat Shark and Rotor Riot’s auditors have qualified their reports on a going concern basis and with our history of losses, we may not be able to continue operating as a going concern.

We have experienced losses from operations since inception and have never generated positive cash flow. The success of our business plan during the next 12 months and beyond will be contingent upon generating sufficient revenue to cover our operating costs and obtaining financing from this Offering. The reports from Fat Shark and Rotor Riot’s independent registered public accounting firm for the fiscal year ended April 30, 2023 and prior years include an explanatory paragraph stating Fat Shark and Rotor Riot have each recurring net losses from operations, negative operating cash flows, and will need additional working capital for ongoing operations. These factors, among others, raise substantial doubt about each of Fat Shark and Rotor Riot’s ability to continue as a going concern. If we are unable to close this Offering, our business, prospects, financial condition and results of operations will be materially and adversely affected and we may be unable to continue as a going concern.

Because the Company will have no operating history prior to its acquisition of Fat Shark and Rotor Riot, any investment in us is highly speculative.

We plan to acquire Fat Shark and Rotor Riot simultaneously with the closing of this Offering. Both companies have been operated by Red Cat since their acquisition by Red Cat in 2020. While we expect the management of each target to remain, no Red Cat officer is joining us. Our management team will be headed by our executive officers together with individuals from Fat Shark and Rotor Riot, and our operations going forward are therefore subject to ordinary integration risks where two companies and two cultures are combined. Further, we may not accurately forecast customer behavior and recognize or respond to emerging trends, changing preferences or competitive factors facing us, and, therefore, we may fail to make accurate financial forecasts. Our current and future expense levels are based largely on our budgeted plans and estimates of future revenue. Similarly, if we are able to raise sufficient capital in this Offering or in future financing transactions, we may use a portion of the proceeds to acquire other operating businesses in our industry or in related industries to facilitate strategic growth and build our market presence and revenue potential. If we do acquire one or more businesses in the future, we may be unable to adjust our spending in a timely manner to compensate for any unexpected revenue shortfall, which could then force us to curtail our business operations or plan of operations or acquisitions.

Additionally, our current revenue projections are based largely on customer and partner relationships and contracts that are still the subject of negotiation, the results of which remain uncertain. Additionally, Fat Shark and Rotor Riot currently operate as subsidiaries of Red Cat, a holding company of drone-related businesses, which also holds two drone businesses that market products for government, industrial and military applications in addition to its consumer-focused product offerings which we will acquire through Fat Shark and Rotor Riot. Therefore, in addition to having no experience as a public company, our new operations will be subject to the risk of a lack of diversification, as today we are limited to drone products designed for consumer or recreational use rather than military or industrial applications. In the future, we may diversify our products beyond the consumer and recreational use but the timeline and success of those efforts are uncertain. Our new subsidiaries will lack the support they previously had in terms of their product development and production efforts, as they can no longer access the more vertically integrated resources that were available to them at Red Cat. The risk of this occurring will intensify if a recession occurs in the U.S. or global economy, as our future business is aimed at consumers whose spending patterns will likely decline as a result of inflation and the prospect of an economic downturn.

Our prospects must be considered in light of the uncertainties, risks, expenses, and difficulties frequently encountered by companies in their early stages of operations, integration and growth process. Due to these contingencies, we may be unable to achieve or maintain profitability in some or all of our business segments in a timely manner or at all, in which case you could lose all or some of your investment.

Fat Shark and Rotor Riot have incurred net losses since their acquisition by Red Cat and may fail to achieve or maintain profitability.

Since their acquisition by Red Cat in 2020, Fat Shark and Rotor Riot incurred net losses for each reported quarter with the exception of Fat Shark which reported a small net income in the quarter ended July 31, 2022. Further, Unusual Machines was formed in July 2019 and has not conducted any active business. Following our acquisition of Fat Shark and Rotor Riot, their operations will constitute our business. Further, Fat Shark had lower revenues in fiscal year 2023 compared to fiscal year 2022, and Rotor Riot had higher net losses in fiscal year 2023 compared to fiscal year 2022, and generally experience fluctuating revenue as a result of recurring seasonal sales cycles. We will need to generate higher revenues and control operating costs in order to attain profitability. There can be no assurances that we will be able to do so or to reach profitability.

We expect to continue to incur losses for the foreseeable future and we expect costs to increase in future periods as we expend substantial financial and other resources on, among other things:

These expenditures may not result in additional revenue or the growth of our business in the manner or to the extent anticipated or intended or at all. If following the acquisition of Fat Shark and Rotor Riot, we fail to grow revenue or to achieve or sustain profitability, our business, financial condition, results of operations, and prospects could be materially adversely affected and the market price of our common stock could be adversely affected.

If the proceeds of this Offering are insufficient to meet our working capital needs, and if we are then not able to obtain sufficient capital, we may be forced to limit the scope of our operations.

We expect that the net proceeds of this Offering after payment to Red Cat will be sufficient to meet our working capital needs for at least 12 months following the closing. However, our future business is aimed at consumers who face inflation and the possibility of a recession. Accordingly, we may require substantial additional working capital. The expected use of net proceeds of this Offering represents our current intentions based upon our present plan and business conditions. As of the date of this Prospectus, we cannot specify with certainty all of the particular uses for the net proceeds to be received upon the completion of this Offering. We will have broad discretion in the application of the net proceeds in the category of working capital and general corporate purposes, including acquisitions, and to fund ongoing operations and expansion of our business, and investors will be relying on our judgment regarding the application of the net proceeds of this Offering other than payments to Red Cat. Depending on the outcome of our business activities and other unforeseen events, our plans and priorities may change and we may apply the net proceeds of this Offering in different proportions than we currently anticipate.

There can be no assurance that our businesses will reach profitability. If adequate additional debt and/or equity financing is not available on reasonable terms or at all, then we may not be able to continue to develop our business activities, and we will have to modify our business plan. These factors could have a material adverse effect on our future operating results and our financial condition.

Our ability to raise financing through sales of equity linked securities depends on general market conditions and the demand for our common stock. We may be unable to raise adequate capital through sales of equity linked securities, and if our stock price is lower than the Offering price at the time of such sales, our existing stockholders could experience substantial dilution. Debt transactions often include restrictive covenants that could limit our ability to engage in strategic transactions, acquire complimentary businesses, or adjust to changing market environments as quickly or efficiently as we otherwise would or at all. Further, if adequate financing is not available or is unavailable on acceptable terms, we may find we are unable to fund our planned expansion, continue offering the Fat Shark and Rotor Riot products, take advantage of acquisition opportunities, develop or enhance or products, or to respond to competitive pressures in the industry which may jeopardize our ability to continue operations.

If we lose key personnel, it may adversely affect our business.

Our future success depends in large part on the continued contributions of our executive officers, members of senior management and other key personnel, particularly Brandon Torres Declet, our Chief Executive Officer and Chairman of the Board. As more fully described elsewhere in this Prospectus, Mr. Declet’s leadership, knowledge and experience in the drone industry is expected to be crucial to our business plan and any future successes and progress we experience. The loss of Mr. Declet’s services would therefore materially adversely affect our business and prospects. We have “key person” insurance in place for Mr. Declet but not for any other officers or employees. Our executive officers, senior management and key personnel are all employed on an at-will basis, which means that they could terminate their employment with us at any time, for any reason and without notice. The loss of any of our key management personnel could significantly delay or prevent the achievement of our development and strategic objectives and adversely affect our business.

Conflicts of interest involving our management team and other parties could materially harm our business.

Our management team on which we heavily depend are or may become involved in other endeavors giving rise to conflicts of interests that are adverse to the Company. For example, Brandon Torres Declet, our Chief Executive Officer has business interests in ventures that operate in the drone industry outside our Company. See “Management and Board of Directors.” These arrangements could cause Mr. Declet to be unable or decline to devote sufficient time and attention to our Company at the expense of these other ventures, and/or to face a conflict of interest, financial or otherwise, adverse to us and in favor of these other ventures. Accordingly, from time-to-time our management may not devote their full time and attention to our affairs, which could have a material adverse effect on our operating results, and there can be no assurance that other conflicts of interest will not arise from their other business ventures, any of which could materially and adversely impact our business. Other members of our management team and Mr. Jeffrey Thompson and Thomas Walker, members of our Board of Directors also have significant roles and interests in other drone companies, which pose similar threats to us as those described as to Mr. Declet.

In addition, the primary contract manufacturer for Fat Shark headsets is Shenzhen Fat Shark Co Ltd. (the “Supplier”), a company located in China which is majority-owned by Molly Mo, who is the wife of Greg French, founder and former owner of Fat Shark prior to its acquisition by Red Cat. These relationships could result in Mr. French diverting his time, resources and corporate opportunities to this other entity rather than the Company. The Company expects to procure Mr. French’s services as a consultant of Fat Shark in connection with the Business Combination.

Finally, Rotor Riot offers a variety of drone products through its website, which includes a number of product offerings from competitors in the drone industry. While these relationships have enabled us to generate revenue, by virtue of their involvement in the sale of drones and drone-related products these customers also have interests that are adverse to ours, and may determine to reduce their expenditures on our products in the future and/or to vertically integrate their operations to reduce or eliminate their reliance on our products.

Any of the foregoing developments could result in materially adverse consequences to our Company, results of operations and financial condition.

If we are unable to attract new customers or maintain and grow Fat Shark and Rotor Riot existing customer relationships in a manner that is cost-effective, our revenue growth could be slower than we expect and our business may be harmed.

To increase our revenue following the acquisition of Fat Shark and Rotor Riot, we must add new customers, upsell to our existing customers, enhance our products with features that set us apart from our competitors, and effectively develop and market new products that enable us to maintain and expand our brand and market share. Demand for our products is affected by a number of factors, many of which are beyond our control. Additionally, the projections and estimates about the future success and growth of the drone industry and demand for drone-related products such as ours, including those referenced elsewhere in this Prospectus, could prove to be incorrect, in which case our results of operations and prospects will decline. For example, if a recession occurs in the U.S. or global economy, we expect that consumer spending, particularly for non-essential goods such as our drone products which are largely focused on recreational uses, may decline, limiting our ability to attract or maintain a sufficient customer base to achieve or maintain the revenue we seek in the development and sale of our products. Even if we do attract customers, the cost of new customer acquisition may prove so high as to prevent us from achieving or sustaining profitability.

Our future success also depends on our ability to increase the use of our products and solutions within and across our existing customers and future customers. While we believe there is a significant opportunity to further expand within Fat Shark and Rotor Riot’s existing customer base, including due to our planned employment of a “land-and-expand” business model in which we plan to establish relationships with new customers and grow those relationships over time by providing high quality products and services, our growth prospects depend on our ability to persuade customers to buy more product, and if we fail to do so, our business goals and prospects may not be achieved to the extent sought or anticipated or at all.

Future operating results and key metrics may fluctuate significantly from period-to-period due to a wide range of factors, which makes our future results difficult to predict.

Our operating results and key metrics could vary significantly from quarter-to-quarter as a result of various factors, some of which are outside of our control, including:

Any one of these or other factors discussed elsewhere in this Prospectus may result in fluctuations in our operating results, meaning that quarter-to-quarter comparisons may not necessarily be indicative of our future performance.

Any failures of or damage to, attack on or unauthorized access to our information technology systems or facilities or disruptions to our continuous operations, including the systems, facilities or operations of third parties with which we do business, such as resulting from cyber-attacks, could result in significant costs, reputational damage and limits on our ability to conduct our business activities.

Our operations will depend on information technology infrastructure and computer systems, both internal and external, to, among other things, record and process customer and supplier data, marketing activities and other data and functions and to maintain that data and information securely. In recent years, several organizations have suffered successful cyber-attacks launched both domestically and from abroad, resulting in the disruption of services to customers, loss or misappropriation of sensitive or private data and reputational harm. If we are subject to a cyber-attack, we could suffer a similar breach or suspension in the future. Further, we may be unaware of a prior attack and the damage caused thereby until a future time when remedial actions cannot be taken. Cyber-threats are often sophisticated and are continually evolving. We may not implement effective systems and other measures to effectively identify, detect, prevent, mitigate, recover from or remediate the full diversity of cyber-threats or improve and adapt such systems and measures as such threats evolve and advance in their ability to avoid detection.

A cyber-security incident, or a failure to protect our technology infrastructure, systems and information and our customers, suppliers and others’ information against cyber-security threats, could result in the theft, loss, unauthorized access to, disclosure, misuse or alteration of information, system failures or outages or loss of access to information. The expectations of our customers and regulators with respect to the resiliency of our systems and the adequacy of our control environment with respect to such systems may increase as the risk of cyber-attacks, which is presently elevated due to the recent work-from-home environment arising from the COVID-19 pandemic, and the consequences of those attacks become more pronounced. We may not be successful in meeting those expectations or in our efforts to identify, detect, prevent, mitigate and respond to such cyber-incidents or for our systems to recover in a manner that does not disrupt our ability to provide products and services to our customers or product personal, private or sensitive information about our business, customers or other third parties.

In July 2023, the SEC approved final rules requiring public companies to report material cybersecurity incidents and disclose their cybersecurity risk management, strategy and governance. The new rules will apply to us beginning next June and will require us to enhance our cybersecurity compliance efforts and have the effect of causing us to expend funds to prevent material cybersecurity incidents.

Specifically, the new rules impose a new Form 8-K disclosure requirement about material cybersecurity incidents within four business days after we determine that a cybersecurity is material. Annually we will be required to disclose in our 10-K our processes, if any, to assess, identify and manage material risks from cybersecurity threats including whether we have hired third parties in connection with the processes. We also will be required to disclose whether any risks from cybersecurity threats have or are materially reasonably likely to materially affect us. Finally we must describe our board of directors oversight of risks from cybersecurity threats and management’s role in assessing and managing these risks. We expect to incur material additional compliance and reporting costs, including monitoring, collecting, and analyzing data concerning cyber-security incidents and evaluating and preparing the required disclosure. We may also be required to incur third party compliance costs.

The failure to maintain an adequate technology infrastructure and applications with effective cyber-security controls could impact operations, adversely affect our financial results, result in loss of business, damage our reputation or impact our ability to comply with regulatory obligations, leading to regulatory fines and sanctions. We may be required to expend significant additional resources to modify, investigate or remediate vulnerabilities or other exposures arising from cyber-security threats. Failing to prevent or properly respond to a cyber-attack could expose us to regulatory fees or civil liability, cause us to lose customers or suppliers, prevent us from offering our products including due to resulting regulatory action, impair our ability to maintain continuous operations, and inhibit our ability to meet regulatory requirements.

Our failure to effectively manage our growth could harm our business.

Other than our Agreement with Red Cat to acquire Fat Shark and Rotor Riot, we have no operating business. Businesses, including development stage companies such as ours which often grow rapidly, may have difficulty managing their growth. These challenges are exacerbated in circumstances such as ours following a recent acquisition of operating businesses. We intend to expand the number and types of products we sell as we grow, if and as capital becomes available. Further, because of our reliance on consumer spending which depends on novelty and social trends, and the rapid and constant technologically advancements that characterize our industry, we are subject to periodic sales cycles, and we will therefore need to replace and regularly introduce on a timely basis new products and technologies, enhance existing products, and effectively stimulate customer demand for new products and upgraded or enhanced versions of our existing products. Similarly, because our product offerings are largely dependent on others’ drone-related products and activities, we may need to adjust or update as third parties advance or alter their technology and activities. If we are able to successfully develop, produce and market our products, we will likely need to incur additional expenditures and expand our personnel with additional employees and consultants who are capable of providing the necessary support. We cannot assure you that our management will be able to manage our growth effectively or successfully. Our failure to meet these challenges could cause us to lose money, and your investment could be lost. 

The replacement and expansion of our products is expected to place a significant strain on our management, operations and engineering resources. Specifically, the areas that are strained most by these activities include the following:

The drone industry relies on limited sources to supply certain components and materials used in the manufacturing of drones. Our intention is to purchase certain components from suppliers based in the United States, which may lead us to pay higher prices, or select parts from a more limited number of suppliers relative to our competitors, which would adversely impact our gross margin and operating results. Our operating results could be materially adversely impacted if our suppliers do not provide the critical components used to assemble our products on a timely basis, at a reasonable price, and in sufficient quantities.

Our ability to meet customer demand depends, in part, on our ability to obtain timely and adequate delivery of components for our products. All of the components that go into the manufacturing are sourced from third-party suppliers.

Some of the key components used to manufacture our products come from a limited or single source of supply, or by a supplier that could potentially become a competitor. Our contract manufacturers generally purchase these components on our behalf from approved suppliers. We are subject to the risk of shortages and long lead times in the supply of these components and the risk that our suppliers discontinue or modify components used in our products. In addition, the lead times associated with certain components are lengthy and preclude rapid changes in quantities and delivery schedules.

If we lose access to components from a particular supplier or experience a significant disruption in the supply of products and components from a current supplier, we may be unable to locate alternative suppliers of comparable quality at an acceptable price, or at all, and our business could be materially and adversely affected. In addition, if we experience a significant increase in demand for our products, our suppliers might not have the capacity or elect not to meet our needs as they allocate components to other customers. Developing suitable alternate sources of supply for these components may be time-consuming, difficult and costly, and we may not be able to source these components on terms that are acceptable to us, or at all, which may adversely affect our ability to meet our development requirements or to fill our orders in a timely or cost-effective manner. Identifying a suitable supplier is an involved process that requires us to become satisfied with the supplier’s quality control, responsiveness and service, financial stability, labor and other ethical practices, and if we seek to source materials from new suppliers, there can be no assurance that we could do so in a manner that does not disrupt the manufacture and sale of our products.

Our reliance on single source, or a small number of suppliers involves a number of additional risks, including risks related to supplier capacity constraints, price increases, timely delivery, component quality, failure of a key supplier to remain in business and adjust to market conditions, delays in, or the inability to execute on, a supplier roadmap for components and technologies; and natural disasters, fire, acts of terrorism or other catastrophic events, including global pandemics.

We do not own or operate any manufacturing facilities. Certain components and services necessary for the manufacture of our products are available from only a limited number of sources, and other components and services are only available from a single source. Our relationship generally is on a purchase order basis and these firms do not have a contractual obligation to provide adequate supply or acceptable pricing to us on a long-term basis. These suppliers could discontinue sourcing merchandise for us at any time. If any of these suppliers were to discontinue its relationship with us, or discontinue providing specific products to us, and we are unable to contract with a new supplier that can meet our requirements, or if they or such other supplier were to suffer a disruption in their production, we could experience disruption of our inventory flow, a decrease in sales and the possible need to re-design our products. Any such event could disrupt our operations and have an adverse effect on our business, financial condition and results of operations. Several new and alternative suppliers have begun offering components suitable for use in our products. With new tooling and electronics, any one of these alternative components could be incorporated into our products but our costs could be higher, they may offer less performance, and, as a result, make our products too costly and less desirable.

If we are unable to attract, integrate and retain additional qualified personnel, including top technical talent, our business could be adversely affected.

Our future success depends in part on our ability to identify, attract, integrate and retain highly skilled technical, managerial, sales and other personnel, particularly as we attempt to expand our operations and further develop and market our products. We face intense competition for a limited number of qualified individuals with the requisite skills and experience from numerous other companies, including other software and technology companies, many of whom have greater financial and other resources than we do. These companies also may provide more diverse opportunities and better chances for career advancement. Some of these characteristics may be more appealing to high-quality candidates than those we have to offer. In addition, new hires often require significant training and, in many cases, take significant time before they achieve full productivity. We may incur significant costs to attract and retain qualified personnel, including significant expenditures related to salaries and benefits and compensation expenses related to equity awards, and we may lose new employees to competitors or other companies before we realize the benefit of our investment in recruiting and training them. Moreover, new employees may not be or become as productive as we expect, as we may face challenges in adequately or appropriately integrating them into our workforce and culture. In addition, as we move into new geographies, we will need to attract and recruit skilled personnel in those areas. We have limited experience with recruiting in geographic areas outside of the United States, and may face additional challenges in attracting, integrating and retaining international employees. If we are unable to attract, integrate and retain suitably qualified individuals who are capable of meeting our growing technical, operational and managerial requirements, on a timely basis or at all, our business will be adversely affected. Additionally, the Company will operate out of multiple locations including Florida and Puerto Rico subjecting it to local labor market conditions.

Risks Related to Our Sale of Drone-Related Products and Operations in the Drone Industry.

We operate in an emerging and rapidly evolving industry which makes it difficult to evaluate our business and future prospects.

The drone industry is relatively new and is growing rapidly. As a result, it is difficult to evaluate our business and future prospects. We cannot accurately predict whether, and even when, demand for our products will increase, if at all. The risks, uncertainties and challenges encountered by companies operating in emerging and rapidly growing industries include:

As such, our current expectations and projects about future events and trends may be different from the actual results. Furthermore, if we are unable to address any of the above challenges successfully, our business, financial condition, results of operations, and prospectus may be adversely affected by such failure.

We face competition from larger companies that have substantially greater resources which challenges our ability to establish market share, grow the business, and reach profitability.

The drone industry is attracting a wide range of significantly larger companies which have substantially greater financial, management, research and marketing resources than we have. The drone hardware and parts and components spaces are dominated by larger Chinese companies such as SZ DJI Technology Company, Ltd and T-Motor. With respect to our FPV products, current and potential future competitors also include a variety of established, well-known diversified consumer electronics manufacturers such as Samsung, Sony, LG Electronics (LGE), HTC, Lenovo, Epson, Yuneec, Boscam, Eachine, Walkera, SkyZone, MicroLED and large software and other products companies such as Alphabet Inc. (Google), Microsoft, Facebook and Snap. The large number of smaller and/or private companies focused on drone solutions also have competitive advantages over us which we may struggle to overcome, particularly as we seek to further establish and grow our customer base. Our competitors may be able to provide customers with different or greater capabilities than we can provide, including technical qualifications, pricing, and key technical support. Many of our competitors may utilize their greater resources to develop competing products and technologies, leverage their financial strength to utilize economies of scale and offer lower pricing, and hire more qualified personnel by offering more generous compensation packages. On the other hand, other small business competitors may be able to offer more cost competitive solutions or may be able to adapt more quickly to market developments due to lower overhead costs, leveraging of their professional relationships and networks, geographic or specialty focuses or greater flexibility inherent in smaller operations and a lower number of personnel.

Among product and service features that drive competition in our industry are breadth of product line, quality and durability of products, stability, reliability and reputation of the provider, along with cost. Quantity discounts, price erosion, and rapid product obsolescence due to technological improvements are therefore common in our industry as competitors strive to retain or expand market share. The Company’s ability to compete effectively will depend on, among other things, the Company’s pricing models, quality of customer service, development of new and enhanced products and services in response to customer demands and changing technology, reach and quality of sales and distribution channels and capital resources. Competition could lead to an inability to sustain sales levels, a reduction in the rate at which the Company adds new customers, a decrease in the size of the Company’s market share and a decline in its customers and revenue. In order to secure sales, we may have to offer comparable products and services at lower pricing, which could adversely affect our operating margins. Our inability to compete effectively against these larger companies could have a material adverse effect on our business, financial condition and operating results.

The development and manufacture of FPV goggles encompasses several complex processes and several steps of our production processes are dependent upon third party vendors, supply chains, the availability of printed circuit boards (PCBs), optics, and certain chips. Any change in availability of these components, manufacturing or design partners could result in delivery interruptions, which could adversely affect our operating results.

As we continue to develop our products, we must progress through the complex and challenging processes involved in the technology and designs on which Fat Shark and Rotor Riot products are founded. Fat Shark and Rotor Riot rely on third party suppliers for the resources needed to navigate these processes and expect to continue to rely on such parties when we reach the manufacturing and marketing stages. Our reliance on third-party manufacturers and service providers will entail risks to which we may not be subject if our future operations were more vertically integrated, including:

Given our early stages, our product technology and manufacturing processes are evolving, which can result in production challenges and difficulties. We may be unable to produce our products in sufficient quantity and quality to maintain existing customers and attract new customers. In addition, we may experience manufacturing problems which could result in delays in delivery of orders or product introductions. Any of these events could lead to production and marketing delays or failure or impact on our ability to successfully commercialize our products. If we fail to contract with third parties on favorable terms, coordinate with and supervise their services and contributions to our processes, and leverage those relationships to deliver quality products in a timely manner to customers, we could experience reductions or delays in revenue, reputational harm and diminished brand recognition, higher than expected expenses, or other adverse developments that would materially harm our business.

Several steps of our production processes are dependent upon certain critical machines and tools which could result in delivery interruptions and foregone revenues.

Fat Shark currently has no equipment redundancy to manufacture its products, meaning we will rely on a limited number of machines to perform a large quantity of steps in the manufacturing and assembly processes. Rotor Riot is limited by the number of personnel it has on staff to assemble custom drones. This may, among other things, delay delivery timelines or reduce our revenue and accounts receivable, and/or force us to rely more heavily on third parties to meet customer deadlines or volume demands, either of which will adversely affect our results of operation and ability to achieve and maintain profitability. If we experience any significant disruption in manufacturing, a serious failure of a critical piece of equipment, or an inability to hire personnel, we may be unable to supply products to our customers in a timely manner. Interruptions in our manufacturing could be caused by us or our partners including but not limited to equipment problems, the introduction of new equipment into the manufacturing process or delays in the delivery of new manufacturing equipment. Lead-time for delivery, installation, testing, repair and maintenance of manufacturing equipment can be extensive. We can provide no assurances that we will not lose potential sales or be able to meet production orders due to future production interruptions in our manufacturing lines.

We may not be able to procure necessary key components for our products or may produce or purchase too much inventory.

The drone industry, and the electronics industry as a whole, can be subject to business cycles. During periods of growth and high demand for products, we may not have adequate supplies of inventory on hand to satisfy customers’ needs. Furthermore, during these periods of growth, our suppliers may also experience high demand and, therefore, may not have adequate levels of the components and other materials that the Company requires to manufacture products so that it can meet customers’ needs. Our inability to secure sufficient components to produce products for customers, or similar challenges faced by the drone manufacturers we serve, could negatively impact our sales and operating results. We may choose to mitigate this risk by increasing the levels of inventory for certain key components assuming we have available cash resources. Increased inventory levels can increase the potential risk for excess and obsolescence should our forecasts fail to materialize or if there are negative factors impacting our customers’ end markets. Such a risk becomes especially prevalent during a recession and market downturn. If we purchase too much inventory, we may have to record additional inventory reserves or write-off the inventory, which could have a material adverse effect on our gross margins and on our results of operations.

We may not be able to keep pace with technological advances; and we depend on advances in technology by other companies.

The drone industry in general, and the market for the sale of drone hardware and component parts in particular, continues to undergo significant changes, primarily due to technological developments. Because of the rapid growth and advancement of technology, shifting consumer tastes and the popularity and availability of other forms of activities, it is impossible to predict the overall effect these factors could have on potential revenue from, and profitability of the drone industry. The development of both drone-related software and hardware is a costly, complex and time-consuming process, and investments in product development often involve a long wait until a return, if any, can be achieved on such investment. We might face difficulties or delays in the development process that will result in our inability to timely offer products that satisfy the market, which might allow competing products to emerge during the development and certification process. We anticipate making significant investments in research and development relating to our products and technology, but such investments are inherently speculative and require substantial capital expenditures. Any unforeseen technical obstacles and challenges that we encounter in the research and development process could result in delays in or the abandonment of product commercialization, may substantially increase development costs, and may negatively affect our results of operations. In the time it takes to develop or improve upon a product, that product may become obsolete.

It is impossible to predict the overall effect these factors could have on our ability to compete effectively in a changing market, and if we are not able to keep pace with these technological advances, then our revenues, profitability and results from operations may be materially adversely affected. It is impossible to predict the overall effect these factors could have on our ability to compete effectively in a changing market, and if we are not able to keep pace with these technological advances, then our revenues, profitability and results of operations may be materially adversely affected. However, if we struggle to adapt to an industry-shifting technological advancement or competitor offerings that render our products relatively less attractive or obsolete, including due to competitive pressures we face relative to other drone companies, it could have a material adverse effect on our business.

Further, we rely on and will continue to rely on components of our products that are developed and produced by other companies over which we have limited control. The commercial success of certain of our planned future products will depend in part on advances in these and other technologies by other companies, and our ability to procure them from such third parties in a timely manner and on economically feasible terms. We may, from time-to-time, contract with and support companies developing key technologies in order to accelerate the development of such products for our specific uses. Such activities might not result in useful technologies or components for us.

Lack of long-term purchase orders and commitments from customers may lead to a rapid decline in sales.

Customers issue purchase orders or use our e-commerce site solely at their own discretion, often shortly before the requested date of shipment. Both our distributor relationships through Fat Shark and our online sales through Rotor Riot entail short-term contracts under which customers are generally able to cancel orders (without penalty) or delay the delivery of products on relatively short notice, regardless of whether or not we are in default under our agreements. The online business involves retail customers who are not likely to be repeat customers unless a need arises for updated hardware or software solutions offered by us, which may not occur on a frequent basis, resulting in lack of reliable recurring revenue in that part of our business. In addition, current customers may decide not to purchase products for any reason. If those customers do not continue to purchase products, sales volume could decline rapidly with little or no warning.

We cannot rely on long-term purchase orders or commitments to protect from the negative financial effects of a decline in demand for products. Fat Shark and Rotor Riot typically plan production and inventory levels based on internal forecasts of customer demand, which are highly unpredictable and can fluctuate substantially. Fat Shark resellers issue purchase orders but they have options to reschedule or pay cancellation fees. The uncertainty of product orders makes it difficult to forecast sales and allocate resources in a manner consistent with actual sales. Moreover, expense levels and the amounts invested in capital equipment and new product development costs are based in part on expectations of future sales and, if expectations regarding future sales are inaccurate, we may be unable to reduce costs in a timely manner to adjust for sales shortfalls. As a result of lack of long-term purchase orders and purchase commitments, and long product development lead times, we may experience a rapid decline in sales.

As a result of these and other factors, investors should not rely on revenues and operating results for any one quarter or year as an indication of future revenues or operating results. If quarterly revenues or results of operations fall below expectations of investors or public market analysts, the price of the common stock could fall substantially.

Our products require ongoing research and development and may experience technical problems or delays, which could lead the business to fail.

Our future research and development efforts will remain subject to all of the risks associated with the development of new products based on emerging and innovative technologies, including, for example, unexpected technical problems or the possible insufficiency of funds for completing development of these products. If technical problems or delays arise, further improvements in products and the introduction of future products could be adversely impacted, and we could incur significant additional expenses and the business may fail. Additionally, we may deploy significant capital or human resources towards developing or improving upon a product, only for such efforts fail to yield the results we hoped for or intended, which would materially adversely affect our financial condition. This is an acute risk given the relatively new and evolving nature of the drone industry, and constant entrance of new market participants attempting to compete with us. Similarly, if we invest in product research and development efforts and a competitor brings a similar product to market before us, or alleges an infringement of their intellectual property, our ability to market the product or compete effectively could be lost. Any such development could materially harm our business.

If we are involved in litigation, it could harm our business or otherwise distract management.

If we become a party to a substantial, complex or extended litigation, it could cause us to incur large expenditures and could distract management. For example, lawsuits by licensors, consumers, employees or stockholders or litigation with federal, state or local governments or regulatory bodies could be very costly and disrupt business. As described elsewhere in these Risk Factors, our operations and products, as well as those of our customers, collaborators and product end-users, come with the inherent possibility of lawsuits arising from product liability, property damage and personal injury, breach of contract and product warranty claims, intellectual property infringement, regulatory violations and sanctions, and data privacy issues, any of which can result in costly and time-consuming litigation which would divert our limited human and capital resources and could cause other adverse impacts on our business such as reputational harm and loss of future business. While disputes from time-to-time are not uncommon, we may not be able to resolve such disputes on terms favorable to us which could have a material adverse impact on our results of operations and financial condition.

Among other things, claims could be brought against us if use and misuse of our products causes personal injury or death. If a consumer causes damage to a person or property using our drone, we as a reseller of the drone could be sued for selling an allegedly defective product. The possibility that the foregoing events occur from events involving our products is particularly high, because we supply technology used in the operation of drones which is relatively novel and are frequently operated at high speeds and altitudes, and often in densely populated areas and/or by individuals who lack a high level of experience operating them. These characteristics increase the probability that injury or damage to personal property might occur, even absent a defect. Additionally, because Fat Shark’s products are used as ancillary or supplemental components of a drone’s functions, we may become involved in disputes arising from a third party’s actions or products that utilize its technology, even if we were not the direct cause of the issue. Any claims against us, regardless of their merit, could severely harm our financial condition, strain our management and other resources.

Product liability claims might be brought against us by customers, civilians or private entities or others using or otherwise coming into contact with our products. If we cannot successfully defend against product liability claims, we could incur substantial liability and costs. Regardless of merit or eventual outcome, product liability claims may cause:

We anticipate the risk of product liability and other claims related to our products and their uses will grow as our products begin to be used. We are unable to predict if we will be able to obtain or maintain insurance for such claims. Insurance coverage is becoming increasingly expensive. We do not have such insurance and we may not be able to obtain it at a reasonable cost or in sufficient amounts to protect us against losses due to liability. A successful product liability claim or series of claims brought against us could cause our stock price to decline and, would adversely affect our results of operations and business.

Our business is highly dependent upon our brand recognition and reputation, and the failure to maintain or enhance our brand recognition or reputation, including due to our high reliance on online and social media platforms, would likely adversely affect our business and operating results.

We believe that maintaining and enhancing Fat Shark and Rotor Riot brand identity, and our reputation are critical to our relationships with customers and strategic partners and to our ability to attract new customers and strategic partners. We also believe that the importance of our brand recognition and reputation will continue to increase as competition in our market continues to develop. Our success in this area will depend on a wide range of factors, some of which are beyond our control, including the following:

Any of the foregoing developments or an inability to navigate these or other challenges to establish and grow our brand recognition and current and future product popularity could materially adversely affect us.

In addition, particularly with respect to Rotor Riot, we are highly dependent on online social media platforms such as Facebook, Instagram and YouTube to advertise our products, market our brand and develop and maintain customer loyalty. Each of these platforms requires that users adhere to strict terms and conditions governing content, communications and other activities on their platform, which are generally heightened for commercial uses such as ours. If we or third parties such as drone pilots who Rotor Riot uses to market our products online fail to adhere to these requirements, we could be limited, restricted or banned from some or all uses, which would materially adversely affect our business.

Future growth and ability to generate and grow revenue and achieve or maintain profitability may be adversely affected if our marketing initiatives are not effective in generating sufficient levels of brand awareness.

Our future growth and profitability will depend in large part upon the effectiveness and efficiency of our marketing efforts, including our ability to:

Planned marketing expenditures are unknown and may not result in increased total sales or generate sufficient levels of product and brand name awareness. We may not be able to manage marketing expenditures on a cost-effective basis.

Future acquisitions could disrupt our business and adversely affect our operating results, financial condition and cash flows.

We may make acquisitions that could be material to our business, operating results, financial condition and cash flows. Our ability as an organization to successfully acquire and integrate technologies or businesses is unproven. Acquisitions involve many risks, including the following:

We may not succeed in addressing these or other risks or any other problems encountered in connection with the integration of any acquired business. The inability to successfully integrate the business, technologies, products, personnel or operations of any acquired business, or any significant delay in achieving integration, could have a material adverse effect on our business, operating results, financial condition and cash flows.

If we incur any future impairment in the carrying value of our goodwill asset or write-off of our general intangibles, it could depress our stock price.

On a combined pro forma basis, as of June 30, 2023, we had $13,873,795 of estimated goodwill and $1,297,690 of intangible assets on our balance sheet. Goodwill and intangible assets must be evaluated for impairment annually or more frequently if events indicate it is warranted. If the carrying value of a reporting unit asset exceeds its current fair value, the goodwill asset is considered impaired. Events and conditions that could result in impairment in the value of our goodwill and intangible assets include, but are not limited to, significant negative industry or economic trends, significant decline in the Company’s stock price for a sustained period of time, significant decline in market capitalization relative to net book value, limited funding that could delay development efforts, significant changes in the manner of use of the assets or the strategy for the Company’s overall business, or safety issues that surface during development efforts, or the end of our product life cycles that will result in impairment of good will. We may in the future be required to record impairment charges to write-off goodwill and intangible assets which is also related to our acquisition of Fat Shark and Rotor Riot. Our stock price could be negatively impacted should future impairments of our goodwill and/or intangible assets occur. On a combined pro forma basis, as of June 30, 2023, we also had $1,297,690 of estimated intangible assets, net on our balance sheet. A valuation will be performed upon closing of the Business Combination based on final assets acquired and liabilities assumed and final amounts of goodwill and other intangibles will be determined. To the extent that we may be required to write-off the value of our goodwill and/or our intangibles assets, our stock price could be adversely affected.

Product quality issues and a higher-than-expected number of warranty claims or returns could harm our business and operating results.

The products that we sell could contain defects in design or manufacture. There can be no assurance we will be able to detect and remedy all defects in the hardware we sell, which could result in product recalls, product redesign efforts, loss of revenue, reputational damage and significant warranty and other remediation expenses. Similar to other mobile and consumer electronics, our products have a risk of overheating in the course of usage or upon malfunction. Any such defect could result in harm to property or in personal injury. If we determine that a product does not meet product quality standards or may contain a defect, the launch of such product could be delayed until we remedy the quality issue or defect. The costs associated with any protracted delay necessary to remedy a quality issue or defect in a new product could be substantial.

Fat Shark and Rotor Riot generally provide a one-year warranty on all of our products, except in certain European countries where it can be two years for some consumer-focused products. The occurrence of any material defects in our products could expose us to liability for damages and warranty claims in excess of our current reserves, and we could incur significant costs to correct any defects, warranty claims or other problems. In addition, if any of our product designs are defective or are alleged to be defective, we may be required to participate in a recall campaign. In part due to the terms of our warranty policy, any failure rate of our products that exceeds our expectations may result in unanticipated losses. Any negative publicity related to the perceived quality of our products could affect our brand image and decrease retailer, distributor and consumer confidence and demand, which could adversely affect our operating results and financial condition. Further, accidental damage coverage and extended warranties are regulated in the United States at the state level and are treated differently within each state. Additionally, outside of the United States, regulations for extended warranties and accidental damage vary from country-to-country. Changes in interpretation of the regulations concerning extended warranties and accidental damage coverage on a federal, state, local or international level may cause us to incur costs or have additional regulatory requirements to meet in the future in order to continue to offer our support services. Our failure to comply with past, present and future similar laws could result in reduced sales of our products, reputational damage, penalties and other sanctions, which could harm our business and financial condition.

Estimated future product warranty claims may be based on a variety of factors including the expected number of field failures over the warranty commitment period, the term of the product warranty period, and the costs for repair, replacement and other associated costs. Because of the foregoing or other contingencies, these estimates could prove to be incorrect, such that our warranty obligations are higher than anticipated. Our warranty obligations may be affected by product failure rates, claims levels, material usage and product re-integration and handling costs. Should actual product failure rates, claims levels, material usage, product re-integration and handling costs, defects, errors, bugs or other issues differ from original estimates, we could end up incurring materially higher warranty or recall expenses than we anticipate, which would materially adversely affect our business.

Risks Related to Intellectual Property Protection

If third-party intellectual property infringement claims are asserted against us, it may prevent or delay our product development and commercialization efforts and have a material adverse effect on our business and future prospects.

Companies in the consumer electronics, wireless communications, semiconductor, AI, IT, and display industries steadfastly pursue and protect intellectual property rights, often times resulting in considerable and costly litigation to determine the validity of patents and claims by third parties of infringement of patents or other intellectual property rights. Other companies may hold or obtain patents or inventions or other proprietary rights in technology necessary for our business. If we are forced to defend against infringement claims, we may face costly litigation, diversion of technical and management personnel, and product shipment delays, even if the allegations of infringement are unwarranted.

Numerous U.S. and foreign issued patents and pending patent applications, which are owned by third parties, exist in the fields in which we are pursuing product development and sales. As the consumer electronics and drone industries expand and more patents are issued, the risk increases that our current and future products may be subject to claims of infringement of the patent rights of third parties. Third parties may assert that we are employing their proprietary technology without authorization. There may be third-party patents or patent applications with claims to inventions, materials, engineering designs, or methods of manufacture related to the design, use or manufacture of our products. Because patent applications can take many years to issue, there may be patent applications currently pending that may later result in patents that our products may infringe upon. Third parties may obtain patents in the future and claim that use of our technologies or those of third parties with which our technologies are integrated infringes on these patents. If any third-party patents were to be held by a court to cover the manufacturing process of any of our products, or any of the characteristics or related components thereof, the holders of any such patents may be able to block our ability to commercialize such product unless we obtained a license under the applicable patents, or until such patents expire. Similarly, if any third-party patents were to be held by a court to cover aspects of our or our customers’ or strategic partners’ products or processes, the holders of any such patents may be able to block our ability to develop and commercialize the applicable product unless we obtained a license or until such patent expires. In either case, such a license may not be available on commercially reasonable terms or at all.

Parties making intellectual property claims against us may obtain injunctive or other equitable relief, which could block our ability to further develop and commercialize one or more of our products. Defense of these claims, regardless of their merit, involves substantial litigation expense and diversion of our management’s attention from our business.

If we are unsuccessful in defending against patent infringement claims in any jurisdiction where such a dispute arises, our products could be found to infringe on the intellectual property rights of others. If a claim of infringement against us succeeds, we may have to pay substantial damages, possibly including treble damages and attorneys’ fees for willful infringement, pay royalties, redesign our infringing products or obtain one or more licenses from third parties, which may be impossible or require substantial time and monetary expenditure. The financial harm caused by any such development with respect to intellectual property disputes and litigation will be heightened to the extent we do not possess, acquire or maintain adequate insurance coverage for these contingencies now or in the future. Further, if there is a successful claim of infringement against us and we are unable to develop non-infringing technology or license the infringed or similar technology on a timely basis, or if we are required to cease using one or more of our business or product names due to a successful trademark infringement claim against us, it could materially adversely affect our business.

We may depend on intellectual property rights including patent rights that have not yet been and may not be obtained by us, and our intellectual property rights and proprietary rights may not adequately protect our products.

Our commercial success will depend substantially on the ability to obtain patents and other intellectual property rights and maintain adequate legal protection for products in the United States and other countries. We will be able to protect our intellectual property from unauthorized use by third parties only to the extent that these assets are covered by valid and enforceable patents, trademarks, copyrights or other intellectual property rights, or are effectively maintained as trade secrets. With the closing of this Offering, 12 issued patents, including four issued in the United States, and nine pending patent Applications, including two pending in the United States will be assigned to a wholly-owned subsidiary of the Company by UAV Patent Corp. (“UAV”) a wholly-owned subsidiary of Red Cat, in each case with a non-exclusive, non-sublicensable royalty free perpetual license back to UAV for Red Cat and its present and future subsidiaries to make, use and sell products subject to such assigned patents and applications solely with respect to military and defense drone applications. See “Business – Intellectual Property” for more information.

We will apply for patents covering our products, services, technologies, and designs, as we deem appropriate. We may fail to apply for patents on important products, services, technologies or designs in a timely fashion, or at all. We do not know whether, and there can be no assurance that, any of our patent applications will result in the issuance of any patents. Even if patents are issued, they may not be sufficient to protect our products, technologies, or designs. Our existing and future patents may not be sufficiently broad to prevent others from developing competing products, technologies, or designs. Intellectual property protection and patent rights outside of the United States, particularly in China, are even less predictable. As a result, the validity and enforceability of patents cannot be predicted with certainty. Moreover, we cannot be certain whether:

The patents we own or license and those that may be issued to us in the future may be challenged, invalidated, rendered unenforceable or circumvented, and the rights granted under any issued patents may not provide us with proprietary protection or competitive advantages. Moreover, third parties could practice our inventions in territories where we do not have patent protection or in territories where they could obtain a compulsory license to our technology where patented. Such third parties may then try to import products made using our inventions into the United States or other territories. We cannot ensure that any of our pending patent applications will result in issued patents, or even if issued, predict the breadth, validity and enforceability of the claims upheld in our and other companies’ patents. Further, patents have a limited lifespan. In the United States, the natural expiration of a patent is 20 years after it is filed, although various extensions may be available. The life of a patent, and the protection it affords, is limited. When the patent life has expired for a product, we will become vulnerable to competition from competitors attempting to replicate the technology that was formerly patent protected. Further, if we encounter delays such as due to regulatory approvals, the time during which we will be able to market and commercialize a product under patent protection could be reduced.

Unauthorized parties may attempt to copy or otherwise use aspects of our processes and products that we regard as proprietary. While we plan to enter into written agreements with certain of our employees and consultants with terms designed to protect our intellectual property rights, there cannot be any assurance that these provisions will provide us with the protection sought. Further, any third parties with whom we do not execute such agreements, such as certain of our suppliers, could attempt to dispute our intellectual property rights or misappropriate our technology or trade secrets. Policing unauthorized use of our proprietary information and technology is difficult and can be costly, and our efforts to do so may not prevent misappropriation of our technologies. We may become engaged in litigation to protect or enforce our patent and other intellectual property rights or in International Trade Commission proceedings to abate the importation of goods that would compete unfairly with our products and, if unsuccessful, these actions could result in the loss of patent or other intellectual property rights protection for the key technologies on which our business strategy depends.

We also rely in part on unpatented proprietary technology, and others may independently develop the same or similar technology or otherwise obtain access to our unpatented technology. We plan to require employees, contractors, consultants, financial advisors, suppliers, and strategic partners to enter into confidentiality and intellectual property assignment agreements (as appropriate), but these agreements may not provide sufficient protection for our trade secrets, know-how or other proprietary information.

The laws of certain countries do not protect intellectual property and proprietary rights to the same extent as the laws of the United States and, therefore, in certain jurisdictions including China, we may be unable to protect our products, services, technologies and designs adequately against unauthorized third-party copying, infringement or use, which could adversely affect our competitive position. To protect or enforce our intellectual property rights, we may initiate proceedings or litigation against third parties. Such proceedings or litigation may be necessary to protect our trade secrets or know-how, products, technologies, designs, brands, reputation, likeness, authorship works or other intellectual property rights. Such proceedings or litigation also may be necessary to determine the enforceability, scope and validity of the proprietary rights of others. Any proceedings or lawsuits that we initiate could be expensive, take significant time and divert management’s attention from other business concerns. Additionally, we may provoke third parties to assert claims against us, which could invalidate or narrow the scope of our own intellectual property rights. We may not prevail in any proceedings or lawsuits that we initiate and the damages or other remedies awarded, if any, may be significant. The occurrence of any of these events may adversely affect our business, financial condition and operating results.

We will register for certain of our trademarks in several jurisdictions worldwide. In some jurisdictions where we will apply to register our trademarks, other applications or registrations may exist for the same, similar, or otherwise related products or services. If we are not successful in arguing that there is no likelihood of confusion between our marks and the marks that are the subject of the other applications or registrations owned by third parties, our applications may be denied, preventing us from obtaining trademark registrations and adequate protection for our marks in the relevant jurisdictions, which could impact our ability to build our brand identity and market our products and services in those jurisdictions. Whether or not our application is denied, third parties may claim that our trademarks infringe their rights. As a result, we could be forced to pay significant settlement costs or cease the use of these trademarks and associated elements of our brand in the United States or other jurisdictions.

Even in those jurisdictions where we are able to register our trademarks, competitors may adopt or apply to register similar trademarks to ours, may register domain names that mimic ours or incorporate our trademarks, or may purchase keywords that are identical or confusingly similar to our brand names as terms in Internet search engine advertising programs, which could impede our ability to build our brand identity and lead to confusion among potential customers of our products and services. If we are not successful in proving that we have prior rights in our marks and arguing that there is a likelihood of confusion between our marks and the marks of these third parties, our inability to prevent these third parties from using our marks may negatively impact the strength, value and effectiveness of our brand names and our ability to market our products and prevent consumer confusion.

If we lose our rights under our third-party technology licenses, our operations could be adversely affected.

Our current or future products may depend in part on technology rights licensed from third parties. We could lose our exclusivity or other rights to use the technology under our licenses if we fail to comply with the terms and performance requirements of the licenses. In addition, certain licensors may terminate a license upon our breach and have the right to consent to sublicense arrangements. If we were to lose our rights under any of these licenses, or if we were unable to obtain required consents to future sublicenses, we could lose a competitive advantage in the market, and may even lose the ability to commercialize certain products or technologies completely. Either of these results could substantially decrease our revenues.

Further, to the extent we need to obtain licenses from third parties to advance our research and development efforts or commercialize or improve upon our products, we may fail to obtain these licenses at a reasonable cost or on reasonable terms, if at all. In that event, we would be unable to further develop and commercialize those products, which could harm our business significantly.

The licensing and acquisition of third-party intellectual property rights is a competitive practice, and companies that may be more established, or have greater resources than we do, may also be pursuing strategies to license or acquire third-party intellectual property rights that we may consider necessary or attractive in order to develop and commercialize our products. More established companies may have a competitive advantage over us due to their larger size and cash resources or greater hardware or software development, production and commercialization capabilities. We may not be able to successfully complete such negotiations and ultimately acquire the rights to the intellectual property surrounding product candidates that we may seek to acquire, in which case our business could be harmed.

Significant inflation could adversely affect our business and financial results.

The high rate of inflation and resulting pressures on costs and pricing of business such as ours focused on the manufacture and sale of electronics products could adversely impact our business and financial results. While inflation has created some salary pressure with our employees who wish to mitigate the impact of inflation, we have not yet suffered inflationary pressures in procurement. A rise in inflation can adversely affect us by increasing our operating costs, including by increasing the costs of materials, freight and labor, which have already been under pressure due to supply chain constraints and the effects of the COVID-19 pandemic and the recent shortage of chips. The Company has not identified, planned or taken any actions as of the date of this Prospectus to mitigate inflationary pressures. Further, in the U.S. the Federal Reserve has responded by increasing interest rates to combat inflation, however such increases may result in a reduced demand for our products and/or an economic downturn. In a highly inflationary environment, or any recession or economic downturn that may result, we may be unable to adjust our business is a manner that adequately addresses these challenges, and these developments could materially adversely affect our business, results of operations and financial condition.

Risks Related to Government Regulation of Our Operations and Industry

Failure to obtain necessary regulatory approvals from the FAA or other governmental agencies by us, our customers, or others who use our products, or limitations put on the use of unmanned aircraft systems, or “UAS,” in response to public privacy or safety concerns, may prevent us from expanding the sales of our drone solutions in the United States.

The regulation of UAS and drone solutions and component parts such as those we offer is subject to substantial change, with regulators including potential alterations, enhancements and additions to existing laws and regulations, and the ultimate treatment is uncertain. A substantial majority of our products are subject to drone-related regulations enforced by the FAA, either directly or due to their inclusion in UAS offered by third parties. Further, even if some of our operations or products are not directly subject to such regulations, Fat Shark’s customers’ operations of UAS that includes our products and technology are subject to those regulations, and their failure to comply will adversely affect our ability to sell to them in the future. Further, adverse regulatory actions such as enforcement proceedings affecting customers and other third parties with which we do business can also adversely affect us, even if the violation or harm alleged did not arise from our conduct or products. Generally, under current FAA regulations the failure to register a UAS, including model aircraft, in accordance with these rules may result in regulatory and criminal sanctions. The FAA may assess civil penalties up to $33,333. Criminal penalties include fines of up to $250,000 and/or imprisonment for up to three years. However, the FAA and other government bodies and agencies are considering changes to address the drone industry, which is relatively new and rapidly evolving. For more information on the laws and regulations applicable to us and our industry, as well as recent developments involving such laws and regulations and their actual and potential impact on us, see “Business – Government Regulations.” In addition, there exists public concern regarding the privacy and safety implications of the use of UAS. This concern has included calls to develop explicit written policies and procedures establishing usage limitations. We cannot assure you that the response from regulatory agencies, customers and privacy advocates to these concerns will not delay or restrict the adoption of UAS and related products and technologies in certain markets. These developments, and any additional regulatory or other burdens imposed on our business and industry due to public health and safety or other concerns presently faced by the drone industry, could harm us and our customers and suppliers by increasing compliance costs and restricting our operations and product offerings and uses, which could materially adversely affect us.

Rising threats of international tariffs, including tariffs applied to goods between the U.S. and China, may materially and adversely affect our business.

We are heavily dependent on Chinese imports for our products and operations. For example, a substantial majority of Rotor Riot’s products are manufactured, directly and indirectly, using Chinese vendors. Fat Shark’s primary contract manufacturer is Shenzhen Fat Shark Technology Ltd., referred to elsewhere in this Prospectus as the “Supplier”, which is located in Shenzhen, China and provides product manufacturing services, including raw material procurement. The majority owner of this entity is the wife of Fat Shark’s founder. We do not have any written agreements with the Supplier and rely only on purchase orders. See “Related Party Transactions” for more information. In addition, Fat Shark’s principal contract manufacturer is located in China. We do not have any written agreements with our other suppliers in China. We rely only on purchase orders. There are inherent risks and uncertainties regarding the enforcement of our rights with respect to our oral agreements and purchase orders. Should our suppliers in China fail to honor our oral agreements and purchase orders we will not have any recourse against such suppliers under Chinese law. The legal system in China and the enforcement of laws, rules and regulations in China can change quickly and the Chinese government may intervene or influence the operations of our suppliers which would adversely impact our business insofar as we would have to seek other suppliers outside of China and such suppliers would most likely charge us more for our products. Rising threats of international tariffs, including tariffs applied to goods traded between the U.S. and China, could materially and adversely affect our business and results of operations. Since the beginning of 2018, there has been increasing rhetoric, in some cases coupled with legislative or executive action, from several U.S. and foreign leaders regarding the possibility of instituting tariffs on the foreign imports of certain materials and products. During this trend, the U.S. and China imposed tariffs or announced proposed tariffs to be applied in the future to certain of each other’s exports. Beginning in 2019, the Trump administration imposed tariffs on imports of electronics products, including drones and component parts, of up to 25%. These tariffs apply to the vast majority of Rotor Riot’s and Fat Shark’s respective inventory, and Rotor Riot has in the past been, and either or both entities may in the future be, forced to implement price increases to adjust to the higher costs of production and sale, which imposes the risk of reduced demand for such products and lower sales and resulting revenue. Further, we do not know if the Biden administration or any subsequent administration will implement any, or alter current tariffs, in a manner adverse to us. These tariffs or any further costs or restrictions imposed on products that we import, could require us to raise our prices, which may result in the loss of customers and harm our business, particularly since we rely on consumer spending and our products are typically considered non-essential, and purchases are therefore highly price sensitive.

In addition, changes in political conditions in China and changes in the state of China-U.S. relations, including any tensions relating to potential military conflict between China and Taiwan, are difficult to predict and could adversely affect the operations or financial condition of the Company. In addition, because of our involvement in the Chinese market, any deterioration in political or trade relations might cause a public perception in the U.S. or elsewhere that might cause our business to become less attractive. Such an impact could adversely affect our revenues and cash flows.

We are or may become subject to governmental export and import controls, economic sanctions and other laws and regulations that could subject us to liability and impair our ability to compete in international markets.

While we understand Fat Shark and/or Rotor Riot have had minimal sales outside of the U.S., we expect to seek to market our products outside of the U.S. The U.S. and various foreign governments have imposed controls, export license requirements and restrictions on the import or export of some technologies. Our products are subject to U.S. export controls, including the Commerce Department’s Export Administration Regulations and various economic and trade sanctions regulations established by the Treasury Department’s Office of Foreign Assets Controls, and exports of our products must be made in compliance with these laws. Furthermore, U.S. export control laws and economic sanctions prohibit the provision of products and services to countries, governments, and persons targeted by U.S. sanctions. Even though we take precautions to prevent our products from being provided to targets of U.S. sanctions, our products, including our firmware updates, could be provided to those targets or provided by our customers despite such precautions.

Further, the manufacture and sale of our products in certain states and countries may subject us to environmental and other regulations. For example, many of Fat Shark and Rotor Riot’s products rely on electricity generated by lithium-ion batteries, which implicate a variety of environmental and other regulations designed to control the production, use, and transportation of hazardous materials such as lithium and other components and minerals deployed in these batteries. In addition, the increasing global focus on climate change, including greenhouse gas (“GHG”) emissions, has resulted in legislative and regulatory efforts to address the causes and impacts of climate change, and any new and more strict laws and regulations to reduce GHG emissions and address other aspects of climate change, including carbon taxes, cap and trade programs, GHG reduction requirements, requirements for the use of green energy, and changes in procurement requirements, may result in increased operational and compliance obligations, which could adversely affect our financial condition and results of operations.

Our failure to obtain required import or export approval or to comply with other applicable domestic or international laws and regulations for our products or operations could harm our international and domestic sales and adversely affect our revenue, or could subject us to costly proceedings, penalties or damages and negative publicity.

If we fail to comply with U.S. and foreign laws related to privacy, data security, and data protection, it could adversely affect our operating results and financial condition.

We, either directly or through our customers, collaborators or end-users of our products, are or may become subject to a variety of laws and regulations regarding privacy, data protection, and data security. This includes the European Union’s (“EU”) General Data Protection Regulation (the “EU GDPR”) and the United Kingdom’s General Data Protection Regulations (the “UK GDPR”) as a result of our sales in the EU. These laws and regulations are continuously evolving and developing. The scope and interpretation of the laws that are or may be applicable to us are often uncertain and may be conflicting, particularly with respect to foreign laws. The application of these laws and regulations can arise from our e-commerce platform, social media activities, drone technology and applications, relationships with third parties and their operations, or from other activities we undertake now or that we may undertake in the future. Data privacy and protection regulations are frequently broad in terms of scope of the information protected, activities affected, and geographic reach.

In particular, there are numerous U.S. federal, state, and local laws and regulations and foreign laws and regulations regarding privacy and the collection, sharing, use, processing, disclosure, and protection of personal data. Such laws and regulations often vary in scope, may be subject to differing interpretations, and may be inconsistent among different jurisdictions. For example, the GDPR includes operational requirements for companies that receive or process personal data of residents of the European Union that are broader and more stringent than those previously in place in the European Union and in most other jurisdictions around the world. The GDPR includes significant penalties for non-compliance, including fines of up to €20 million or 4% of total worldwide revenue. Additionally, in June 2018, California enacted the California Consumer Privacy Act (the “CCPA”). The CCPA requires covered companies to provide California consumers with new disclosures and will expand the rights afforded consumers regarding their data. Fines for noncompliance may be up to $7,500 per violation. Since the CCPA was enacted, Nevada, Maine, Colorado and Virginia have enacted similar legislation designed to protect the personal information of consumers and penalize companies that fail to comply, and other states have proposed similar legislation. The costs of compliance with, and other burdens imposed by, the GDPR, CCPA, and similar laws may limit the use and adoption of our products and services and/or require us to incur substantial compliance costs, which could have an adverse impact on our business.

In the U.S., at least 35 states and the District of Columbia introduced or considered almost 200 consumer privacy bills in 2022. More and more states will continue to enact similar laws. Additionally, in June 2022 the American Data Privacy and Protection Act was introduced in the U.S. House of Representatives. As introduced this proposed legislation would establish requirements for how companies handle personal data by, among other things, limiting the collection, processing, and transfer of personal data to that which is reasonably necessary to provide a requested product or service, prohibiting companies from transferring individuals’ personal data without their affirmative express consent, establishing a right to access, correct, and delete personal data, requiring companies to provide individuals with a means to “opt out” of advertising, requiring companies to implement security practices aimed at protecting personal data, and imposing enforcement actions and the possibility of civil proceedings for violations. Proposed federal legislation, like the American Data Privacy and Protection Act, will likely continue to be debated and, at some point, may be enacted in some form.

We intend to strive to comply with all applicable laws, policies, legal obligations, and industry codes of conduct relating to privacy, data security, and data protection. Our limited resources may adversely affect our compliance effort. Given that the scope, interpretation, and application of these laws and regulations are often uncertain and may be in conflict across jurisdictions, it is possible that these obligations may be interpreted and applied in a manner that is inconsistent from one jurisdiction to another and may conflict with other rules or our practices. Any failure or perceived failure by us, customers, or third-party vendors or end-users involved with our products to comply with our privacy or security policies or privacy-related legal obligations, or any compromise of security that results in the unauthorized release or transfer of personal data, may result in governmental enforcement actions, litigation, or negative publicity, and could have an adverse effect on our operating results and financial condition.

Governments are continuing to focus on privacy and data security, and it is possible that new privacy or data security laws will be passed or existing laws will be amended in a way that is material to our business. Any significant change to applicable laws, regulations, or industry practices regarding the personal data of our employees, agents or customers could require us to modify our practices and may limit our ability to expand or sustain our salesforce or bring our products to market. Changes to applicable laws and regulations in this area could subject us to additional regulation and oversight, any of which could significantly increase our operating costs and materially affect our operating results and financial condition.

Risks Related To Our Common Stock and this Offering

Our management will have significant discretion over our use of the net proceeds from this Offering and we may use these proceeds in ways with which you may not agree.

Other than payments to the Drone Racing League and Red Cat for the purchase of Fat Shark and Rotor Riot, and if the Red Cat Note is not converted, our management will have considerable discretion in deciding how to apply net proceeds of this Offering. You will not have the opportunity to assess whether the proceeds are being used appropriately before you make your investment decision. You must rely on the judgment of our management regarding the application of the net proceeds of this Offering. We cannot assure you that the net proceeds will be used in a manner that would improve our results of operations or increase our stock price. See “Use of Proceeds.”

Because the Purchase Price for Fat Shark and Rotor Riot exceeds an independent valuation that Red Cat received for the enterprise value of the target companies, you may lose all or part of your investment.

We have agreed to pay Red Cat a purchase price of $20.0 million to acquire Fat Shark and Rotor Riot comprised of (i) $2.0 million in cash from the proceeds of the Offering, (i) $1.0 million of our existing cash which the Company will deposit into escrow upon the effectiveness of the Registration Statement, of which this Prospectus is a part and (iii) $17.0 million of the Company’s common stock or 3,400,000 shares. In November 2020, Red Cat acquired Fat Shark for a purchase price of $8.4 million and in January 2020, Red Cat acquired Rotor Riot for a total purchase price of $2.0 million. As disclosed in Red Cat’s definitive proxy statement on Schedule 14A that was mailed to Red Cat’s shareholders, Red Cat received a valuation from a valuation expert engaged by Red Cat that estimated that Fat Shark and Rotor Riot had a combined enterprise value range of $5.1 million to $5.7 million, as of November 30, 2022. While the Purchase Price was negotiated in good faith between our Chief Executive Officer and an independent special committee of the Red Cat board of directors, the Company does not intend to obtain an independent valuation on the assets and liabilities assumed. A valuation will be performed upon closing of the Business Combination based on final assets acquired and liabilities assumed and final amounts of goodwill and other intangibles. See also the “Risk Factors – If we incur any future impairment in the carrying value of our goodwill asset or write-off our general intangibles, it could depress our stock price.” Accordingly, if the Company’s management is unsuccessful in implementing its growth strategy to grow its business after the Business Combination to justify the multiple that it is paying for the purchase price, it is possible that an investor may lose all or part of its investment.

Because the market price of shares of our common stock is subject to fluctuation, you may not be able to sell your common stock at or above the Offering price.

The market price of shares of our common stock may fluctuate significantly in response to factors, some of which are beyond our control, including:

Recently, the stock market, in general, has experienced extreme price and volume fluctuations due to, among other factors, concerns involving inflation, the Federal Reserve interest rate increases, supply chain shortages, recession fears, and geopolitical turmoil including the war in Ukraine. Continued market fluctuations could result in extreme market volatility in the price of our common stock which could cause a decline in the value of our common stock below the Offering price.

Our stock price may be volatile, which could result in substantial losses to investors.

In addition to changes to market prices based on our results of operations and the factors discussed elsewhere in this “Risk Factors” section, the market price of and trading volume for our common stock (including any stock-run ups or price declines) may change for a variety of other reasons, not necessarily related to our actual operating performance. The capital markets have experienced extreme volatility particularly with small public companies with relatively smaller public floats that has often been unrelated to the operating performance of particular companies. These broad market fluctuations may adversely affect the trading price of our common stock. In addition, the average daily trading volume of the securities of small companies can be very low, which may contribute to future volatility.

Factors that could cause the market price of our common stock to fluctuate significantly include:

Any of these factors, as well as broader market and industry factors, may result in large and sudden changes in the trading volume of our common stock (including stock run ups or price declines) and could seriously harm the market price of our common stock, regardless of our operating performance. This may prevent you from being able to sell your shares at or above the price you paid for your shares, if at all. In addition, following periods of volatility in the market price of a company’s shares, shareholders often institute securities class action litigation against that company. Our involvement in any class action suit or other legal proceeding could divert our senior management’s attention and could adversely affect our business, financial condition, results of operations and prospects.

Because our public offering price is substantially higher than our net tangible book value per share, you will experience immediate and substantial dilution.

If you purchase our common stock in this Offering, you will pay more for your common stock than the amount paid by our existing shareholders for their common stock on a per share basis. As a result, you will experience immediate and substantial dilution of approximately $3.89 per share, representing the difference between the public Offering price of $5.00 per share, the midpoint of the initial public offering price range reflected on the cover page of this prospectus and our pro forma as adjusted net tangible book value per share as of June 30, 2023 immediately upon the completion of this Offering.

Because our sole remedy under the Purchase Agreement in the event of any breaches of representations and warranties is to cancel some or all of the 100,000 shares of our common stock, the value of such shares may be an insufficient remedy.

The Purchase Agreement contains representations and warranties made by Red Cat and Mr. Jeffrey Thompson, Red Cat’s Chief Executive Officer. Based upon negotiations with Red Cat and its counsel, we agreed that Mr. Thompson, one of our founders, our largest stockholder and a member of our Board will backstop Red Cat’s indemnification obligations under the Purchase Agreement in the event we claim Red Cat and/or Mr. Thompson have breached any of their respective representations and warranties contained in the Purchase Agreement, as amended by the Second Amendment with 100,000 shares of our common stock (after giving effect to the 1-for-2 reverse stock split). Such shares will not be placed into escrow. Red Cat has no liability for such breaches by it. That means if the value of such shares held by Mr. Thompson is not at least equal to our damages, we will not have a remedy sufficient to permit us to recoup all of our damages. The only exception is fraud. Although we negotiated this limited remedy in good faith, it is possible that the shares held by Mr. Thompson may not be sufficient in which case such breach may adversely and materially affect our common stock price.

We will incur significant additional costs as a result of being a public company, and our management will be required to devote substantial time to compliance with our public company responsibilities and corporate governance practices.

Upon completion of this Offering, we expect to incur increased costs associated with corporate governance requirements that will become applicable to us as a public company, including rules and regulations of the SEC, under the Sarbanes-Oxley Act, the Dodd-Frank Wall Street Reform and Customer Protection Act of 2010, and the Exchange Act, as well as the rules of NYSE American. These rules and regulations are expected to significantly increase our accounting, legal and financial compliance costs and make some activities more time consuming, including due to increased training of our current employees, additional hiring of new employees, and increased assistance from consultants. As described elsewhere in this Prospectus, the SEC’s new cybersecurity rules will increase our compliance costs. We also expect these rules and regulations to make it more expensive for us to maintain directors’ and officers’ liability insurance. As a result, it may be more difficult for us to attract and retain qualified persons to serve on our Board or as executive officers. Furthermore, these rules and regulations will increase our legal and financial compliance costs and will make some activities more time-consuming and costly. We cannot predict or estimate the amount of additional costs we will incur as a public company or the timing of such costs. In addition, our management team will need to devote substantial attention to interacting with the investment community and complying with the increasingly complex laws pertaining to public companies, which may divert attention away from the day-to-day management of our business, including operational, research and development and sales and marketing activities. Increases in costs incurred or diversion of management’s attention as a result of becoming a publicly traded company may adversely affect our business, prospects, financial condition, results of operations, and cash flows.

Our failure to maintain effective disclosure controls and internal controls over financial reporting could have an adverse impact on us.

We will be required to establish and maintain appropriate disclosure controls and internal controls over financial reporting. Failure to establish those controls, or any failure of those controls once established, could adversely impact our public disclosures regarding our business, financial condition or results of operations. In addition, management’s assessment of internal controls over financial reporting may identify weaknesses and conditions that need to be addressed or other matters that may raise concerns for investors. Any actual or perceived weaknesses and conditions that need to be addressed in our internal control over financial reporting, disclosure of management’s assessment of our internal controls over financial reporting may have an adverse impact on the price of our common stock.

Because our common stock will be listed on NYSE American, we will become subject to additional regulations and continued requirements.

We will not proceed with this Offering unless our common stock is listed on NYSE American. Following the Offering, we will be required to meet the continued listing standards for NYSE American. If we fail to meet NYSE American’s listing standards, our common stock may be delisted. NYSE American requires that the average closing price of its listed common stock remain above $1.00 over a 30 consecutive day period, in order to remain listed. In addition, to maintain a listing on NYSE American, we must satisfy minimum financial and other continued listing requirements and standards, including those regarding director independence and independent committee requirements, minimum stockholders’ equity, and certain corporate governance requirements. If we are unable to satisfy these requirements standards, our common stock could be subject to delisting. Delisting would have a negative effect on the price of our common stock and would impair your ability to sell our common stock when you wish to do so.

Our Board of Directors may authorize and issue shares of new classes of stock that could be superior to or adversely affect current holders of our common stock.

Our Board of Directors has the power to authorize and issue shares of classes of stock, including preferred stock that have voting powers, designations, preferences, limitations and special rights, including preferred distribution rights, conversion rights, redemption rights and liquidation rights without further shareholder approval which could adversely affect the rights of the holders of our common stock. In addition, our Board could authorize the issuance of a series of preferred stock that has greater voting power than our common stock or that is convertible into our common stock, which could decrease the relative voting power of our common stock or result in dilution to our existing common stockholders.

Any of these actions could significantly adversely affect the investment made by holders of our common stock. Holders of common stock could potentially not receive dividends that they might otherwise have received. In addition, holders of our common stock could receive less proceeds in connection with any future sale of the Company, in liquidation or on any other basis.

If we raise capital in the future, it may dilute our existing stockholders’ ownership and/or have other adverse effects on us, our securities or our operations.

If we are required to raise additional capital by issuing equity securities, our existing stockholders’ percentage ownership may decrease, and these stockholders may experience substantial dilution. Additionally, the issuance of additional shares of common stock or other securities could result in a decline in our stock price. Further, if we are required to raise additional funds by issuing debt instruments, these debt instruments could impose significant restrictions on our operations, including liens on our assets and negative covenants prohibiting us from engaging in certain transactions or corporate actions that may have the effect of limiting our ability to pursue our business strategy and growth objectives.

Common stock eligible for future sale may adversely affect the market.

We have agreed to enter into a registration rights agreement for the registration of 300,000 shares of our common stock that we will issue to Red Cat in connection with the Business Combination and to use our best efforts to file a registration statement 120 days after the consummation of the Offering and have such registration statement declared effective within 180 days. Upon registration and expiration of the 180-day lockup for Red Cat, Red Cat’s common stock will be freely-tradable. The following discussion refers to the public sale of our common stock by our other stockholders beginning after expiration of the lockup agreement all of our officers, directors, 5% shareholders and holders of our Series B Preferred Stock have entered into. From time-to-time after the expiration of the lock-up period, our stockholders may be eligible to sell all or some of their common stock by means of ordinary brokerage transactions in the open market pursuant to Rule 144 promulgated under the Securities Act of 1933 (the “Securities Act”), subject to certain limitations. In general, Rule 144 provides that any non-affiliate of the Company who has held restricted common stock for at least six months, is entitled to publicly sell their restricted stock, provided that the Company stays current in its SEC filings. Affiliates, which would include an officer, director or other person in control of the Company may sell after a six month holding period from the date of purchase) with the following restrictions: (i) the Company is current in its SEC filings, (ii) the holders comply with certain manner of sale provisions, (iii) the holders file a Form 144, and (iv) the holders comply with volume limitations limiting the sale of shares within any three-month period to the greater of (1) a number of shares that does not exceed 1% of the total number of outstanding shares, or (2) the average weekly trading volume computed over a four week period. A person who has ceased to be an affiliate at least three months immediately preceding the applicable sale and who has owned such shares of common stock for at least six months may sell the shares under Rule 144 without regard to any of the limitations described above except for the current public information requirement.

Future sales of substantial amounts of our common stock in the public market, or the anticipation of these sales, could materially and adversely affect market prices prevailing from time-to-time, and could impair our ability to raise capital through sales of equity or equity-related securities. In addition, the market price of our common stock could decline as a result of sales of a large number of shares of our common stock in the market or the perception that these sales may occur.

If securities or industry analysts do not publish research or reports about our business, or if they adversely change their recommendations regarding our common stock, the market price for our common stock and trading volume could decline.

The trading market for our common stock will be influenced by research or reports that industry or securities analysts publish about our business. As of the date of this Prospectus, no analysts publish research reports about us, and we cannot assure you that any will. If analysts do, and one or more analysts who cover us downgrade our common stock, the market price for our common stock would likely decline.

We and our investors face the implications of our status as an emerging growth company under the federal securities laws and regulations.

We qualify as an “emerging growth company” pursuant to the Jumpstart Our Business Startups Act of 2012, or the JOBS Act. As an emerging growth company, we have elected to take advantage of specified reduced reporting and other requirements compared to those that are otherwise applicable generally to public companies. These provisions include but are not limited to: reduced disclosure obligations regarding executive compensation in periodic reports, proxy statements and registration statements; and exemptions from the requirements of holding a nonbinding advisory vote on executive compensation and shareholder approval of any golden parachute payments not previously approved.

We will remain an emerging growth company until the earliest of (a) the last day of the fiscal year during which we have total annual gross revenues of at least $1.235 billion; (b) the last day of our fiscal year following the fifth anniversary of the completion of this Offering; (c) the date on which we have, during the preceding three-year period, issued more than $1.0 billion in non-convertible debt; or (d) the date on which we are deemed to be a “large accelerated filer” under the Exchange Act, which would occur as of the end of any fiscal year if the market value of our common stock that are held by non-affiliates exceeds $700 million as of the last business day of our most recently completed second fiscal quarter. Once we cease to be an emerging growth company, we will not be entitled to the exemptions provided in the JOBS Act discussed above.

We have never paid dividends and we do not expect to pay dividends for the foreseeable future.

We intend to retain earnings, if any, to finance the growth and development of our business and do not intend to pay cash dividends on shares of our common stock in the foreseeable future. The payment of future cash dividends, if any, depend upon, among other things, conditions then existing including earnings, financial condition and capital requirements, restrictions in financing agreements, business opportunities and other factors. As a result, capital appreciation, if any, of our common stock, will be your sole source of gain for the foreseeable future.